1 Technical notes on version 2.3
5 kes Plugin work -- bring dir up to fd level.
6 kes Start implementation of VTL code
7 kes Fix Win32 build after adding new cats subroutine.
9 kes First cut at Duplicate Job implementation.
11 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
12 kes Start PluginOptions string, and refactor a bit of ua_run.c
13 ebl Apply Allan patch that permit to reset recyclepool.
15 kes Test patch -- possible fix or improvement for bug #1053
16 kes Refactor FD and SD status commands to permit new API code in
17 SD, and to fix Win32 build.
18 kes Win32 build is now working.
20 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
21 some ideas in patch from Scott Bailey.
22 kes Begin implementation of duplicate Job control.
23 kes Fix some of Win32 build after recent additions.
24 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
25 which causes the FD to detect whether or not the OS has the
26 honor no dump bit (*BSD systems), and if so, to skip backing up
27 any file with this bit set. The feature is enabled by setting
28 'honor no dump flag = yes' in the Options section of a FileSet.
30 kes Correct po warning message with datarootdir
31 kes Implement more code in dird.c to put configuration parsing in
32 a class rather than use globals.
33 kes Restructure SD status command for implementation of bat API
36 kes Suppress incorrect 'Will not descend from x into y' messages.
37 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
38 daemon globals used by parser.
39 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
41 kes Fix free of plugin_list when none exists.
43 ebl Apply accurate project patch.
45 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
46 on non-mempool object)
47 kes First cut of converting FD .status to work with bat API.
49 .status client=XXX header
50 .status client=XXX running
51 .status client=XXX terminated
52 kes Implement first cut of Copy Job.
53 kes Implement Catalog in Pool resource. It overrides catalog specified
54 in the Client resource.
56 kes Apply patch (with some difficulties) from Joao Henrique Freitas
57 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
59 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
60 ftruncate() actually works. In the case of some (cheap) NAS devices,
61 it does not, and so recycling NAS Volumes does not work. The code
62 simply unlink()s the file, then recreates it. This fixes bug #1011.
64 kes First incomplete cut of big malloc blocks for htable.
65 kes Tweak plugin code.
67 kes Plugin debug code + tweak a couple bat dialog layouts
69 kes Fix creating first JobMedia record during Migration to include
70 proper index. This caused slow restores of migrated jobs.
71 kes Temp fix to plugin name file_index.
72 kes Bacula backed up and restored a MySQL database.
74 kes Implement plugin restore.
75 kes Implement parsing of db_driver to give db_type index.
77 kes First cut of plugin restore code.
78 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
79 and do not strip paths on symbolic links.
80 kes Set catalog backup database and user name from values specified on
82 ebl Fix #1031 about wrong pool source information in job report.
85 kes Remove a redundant jcr argument to find_files, match_files, and
87 kes Implement '.status dir header|scheduled|running|terminated' that
88 prints the requested status section. With the exception of the
89 header, the other reports have fields separated by tabs (\t).
91 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
92 a resource embedded run command to find a since time if no explicit
93 since time was supplied on the command line.
94 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
95 that updates the state file at job termination time in addition to
96 when the daemon terminates.
98 kes First version where a plugin did a backup.
99 bpipe-fd.so created a backup file, wrote a test
100 string to it, and Bacua could restore this fabricated file.
102 kes Implement DB Driver = string for the DBI driver.
103 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
104 kes First cut of code for loading Win32 plugin dlls. Implement
105 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
106 and implement a dlfcn.h file based on opengroup's definitions of
109 kes First cut plugin directives.
111 kes Apply patch from bug #1049 to prevent stripping the path on a
113 kes Attempt to fix bug #1047 where stripping a path corrupts the
114 heap. Waiting for feedback.
115 kes Correct the Mount message not to suggest labeling a new tape
116 when doing a restore. Submitted by email by John Stoffel.
117 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
118 FD by using casting. Reported in bug #1042.
120 kes A bit of crypto cleanup. More later.
122 Release Version 2.2.8
124 kes Apply patch from Martin to correct bug #1040, bscan sets existing
126 kes Fixed important spelling error in doc -- bug #1045.
128 ebl Fix bextract to be able to extract non-portable Win32 data to
130 kes Move initialization of read/write res lock earlier in the code.
131 This fixes the crash with a null conf file. This fixes bug
133 kes Redefine CURES in lib/parse_conf to be URES and move it all
134 into lib/parse_conf.c -- this responds to bug #1042, but does
135 not fix it. The fix is not to compile with FORTIFY_SOURCE.
136 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
137 the trunk SVN. I don't think this was reported as a bug.
139 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
141 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
143 kes Add DataDespooling and DataCommitting status (committing is
144 the last despooling).
145 kes Finish implementation of new reservations code noted below.
147 kes Fix bsnprintf for float point numbers. I broke recently when
148 parameterizing some variables. This fixes bug #1036.
149 kes Undo recent reservations changes ... will apply them later
150 when they work better.
152 ebl Fixes #1034 which cause mysql to hang the connection after 8h
153 ebl Change default statistics target of filename.name and path.path
154 fields for PostgreSQL. This speeds lookup by indexes. Thanks
156 kes A few more tweaks to new reservation code. Make sure to clear
157 vol released flag when retaking volume. When reading label and
158 label is bad mark volume unused. When recycling, mark volume
159 unused so it can be renamed.
161 kes Fix reserve_volume() so it doesn't release a volume in use
162 (i.e. a volume entry not marked released). This should be
163 the last part needed to fix bug #1018.
165 kes Move Heartbeat documentation from Job to Director resource.
166 This fixes bug #1033.
168 kes Fix existing switch drive SD code to call autochanger to release
169 any old volume. This must be done to keep the autochanger from
170 releasing subsequently newly reserved volumes in doing a close().
171 This should fix bug #1018.
172 kes Fail if attempting to get console input in batch mode. This
173 should help fail RunScript console commands that are incomplete.
174 kes First cut implementing switch_drive() in SD (not actually called).
176 kes Implement first cut running console commands in a RunScript.
178 ebl Fixes bug #1028 where 'Selection Type' option was not usable
180 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
183 Release Version 2.2.7
185 kes Add new free_tls() entry point so that Win32 builds.
186 kes Fix compile warning in src/lib/util.c
187 kes Fix entry point for edit_job_codes() so that Win32 builds.
188 kes Fix seg fault Frank Sweetser reports in regression testing
189 on his systems. The problem was that the original author of
190 bsnprintf.c did not take into account the side effects of
191 using ++x in the argument to a #define.
192 kes Make SD protocol backward compatible with version 2.2.x.
194 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
195 because Bacula no longer restores sockets.
196 ebl Always use ignorecase fileset option on win32 FD.
198 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
199 that implements double quoting include names in conf files,
200 and also allows piping input by having the first character
201 be a vertical bar (|).
202 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
203 that implement %f in RunScripts to pass the FileSet name.
204 kes Skip leading | when lex input comes from a pipe as suggested
205 by Michael Stapelberg <michael@stapelberg.de>.
207 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
208 Nerijus Baliunas <nerijus@users.sourceforge.net>
210 kes Implement Plugin Directory and plugin events.
212 kes Implement a security enhancement: TLS authentication but no
213 encryption. Enabled by setting 'TLS Authentication = yes'.
214 Note when this is on, TLS encryption is turned OFF!
216 kes This patch corrects a problem where the maximum concurrent storage
217 jobs counter gets out of sync during restore jobs causing jobs to
218 'wait on max Storage jobs'. This patch fixes bug #1009.
220 kes This patch fixes bcopy so that it produces correct Volumes.
222 kes This patch eliminates spurious output to the console during a VerifyVolume
223 job that contains encrypted data. It fixes bug #1024.
225 kes This patch prevents the 'status dir' command from trying to use a scratch
226 volume and possibly moving it from one pool to another. This patch fixes
229 kes Add new include to postgresql.c suggested by Marc Cousins so
230 that it compiles correctly with pgre version 8.3.
232 kes Fix --archivedir addition to configure. Replace it with
233 --with-archivedir in configure.in This fixes the regression
235 kes This patch fixes bug #1012 where the job is canceled because
236 of Max Run Time exceeded when the job has not yet started.
238 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
239 one 'part' to write. Instead of each part being stored on disk,
240 written to DVD, then deleted from disk, all parts are written to disk,
241 and only the last is written and deleted from disk.
242 kes This patch fixes the status command to include the formating string for
243 JS_AttrInsterting. It fixes bug #1021.
244 kes This patch should fix the Mac OS X build problem on the latest
245 Darwin, where sys/types.h was not included correctly (apparently
246 due to a change in the Mac headers). The solution was to explicitly
247 ensure that it is defined for the ./configure.
248 This patch also has a rebuild of configure that includes the Debian
249 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
250 kes This patch should ensure that queued messages to the console are
251 displayed as soon as possible. It should fix bug 1007, but has been
252 reported not to work.
254 kes This patch fixes the infinite loop when trying to increase the
255 maximum number of volumes in a Pool during the add command.
256 This patch fixes bug #1008.
258 Release Version 2.2.6
260 db Remove extra data on estimate command in joblist for bat.
262 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
263 really change anything, but is the beginning of doing it *right*.
264 To do it completely right the LastWritten date must be passed to
265 the SD, but it is not yet done.
266 kes Minor tweaks to some bat restore SQL.
267 kes This patch fixes bug #1003 where putting the message output from
268 a Verify job into the catalog results in a recursive loop. The problem
269 seems to show up only with postgresql (to be verified).
270 kes Correct %x to %p in postgresql debug statement.
272 kes Fix bug #942 where lots of emails where generated when the heartbeat
273 interval was low and Bacula wanted a different tape from the one in
276 ebl Add new SD despooling attributes and Dir inserting attributes
277 job status codes in the catalog (Status table).
279 ebl Use qmake-qt4 instead of qmake when available (debian system).
281 kes Add a security warning to src/cats/make_catalog_backup.in indicating
282 that passing the password via the command line (arg 3) is insecure.
283 This responds to bug #990 (it doesn't fix it).
285 kes Set default debug_level to zero. This corrects bugs #991 and #993.
286 kes Fix a crash in bat when it cannot connect to the Director for example
287 if the Director is not running.
288 kes Remove redundant INDEX (JobId) from File table in the trunk.
290 kes Make explicit exception to GPL in LICENSE to permit linking
291 the Win32 FD with Microsoft VSS code.
292 kes Apply the Solaris package patch from
293 Masopust, Christian <christian.masopust@siemens.com>
294 kes Apply the patch to optionally add a timestamp in the debug output
295 submitted by Mariusz Czulada <manieq@wp.eu>.
297 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
298 backend (sql_strerror). Fixes bug #989
300 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
301 It applied with no problems.
302 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
304 kes Redirect stderror to stdin on mt status command in mtx-changer.in
305 since the status is returned on stderr on Solaris.
306 kes Activate Close button on tray-monitor window. This fixes
308 kes Check for NULL item in parse_conf.c before calling it. In the
309 case of Device, there is no item and this caused a seg fault when
310 Device appears in the conf file.
311 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
312 avoids pulling in config.h multiple times in some new code.
314 kes Fix spurious warning message printed when creating a volume with
315 a LabelFormat. This fixes bug #976.
317 Release Version 2.2.5
319 kes Add JobId in place of Job name in all the Jmsg() output.
320 kes Correct the APP_DESC for the Win32 storage service (remove an e).
322 kes Make maxvol-test and new more strict maxvol2-test work.
323 kes Print JobId in all Jmsg() job output.
325 kes Add new SD despooling attributes and Dir inserting attributes
326 job status codes. This fixes bug 961.
327 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
329 kes Fix doc issue. This fixes bug #963.
330 kes Fix listing performance problems in bat. Pointed out by
332 kes Remove old debug code.
333 kes Fix bat code that tests for Win32. This should fix bug #968
334 kes Query 5 list wrong Vol after migration. This fixes bug #960
336 ebl Fix #969 where user can't change Replace option in restore menu.
338 kes Save jcr in thread specific data (tsd) for each thread.
339 kes Make Dmsg() print JobId as -%u.
340 kes Make Jmsg, Emsg, and others automatically pickup the jobid
341 for the thread if it exists.
342 kes Remove old reservation debug jid code.
343 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
344 ebl Add an option that permit to specify spool size in job
345 definition. (Applying patches/testing/spoolsize_per_job.patch).
346 You must upgrade SD and DIR at the same time.
347 dvl Add new configuration item --archivedir
348 dvl Adjust regression tests to use tmp not /tmp. This will allow
349 multiple concurrent runs of the regression tests.
351 kes Fix race condition that drops final block written to volume.
352 This happens in rare cases with multiple simultaneous jobs
353 when the Volume fills. This fixes bug #964. May be related
354 to bug #935 and possibly #903.
355 kes Eliminate more strerror() and replace with bstrerror().
356 kes Remove BSD getopt and replace with unrestricted IBM version.
357 kes Fix Win32 build for changed calling sequences.
358 kes More tweaks to the mount volume routines to get everything
359 right. Changed variable name from find to have_vol, which is
360 much easier to understand.
361 kes Enhance btimer debug code.
363 kes Fix FD->SD authorization failure, which was due to spurious
364 wakeups from a pthread_cond_timedwait(). Simply check the
365 predicate before continuing. This fixes bug #953.
366 kes Add const char where needed (more to do). Remove temp debug code.
368 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
369 kes Don't overwrite error message in check_tables_version.
371 kes Unlock batch insert tables with same calls used elsewhere.
372 kes Allow starting 59 jobs a second.
373 kes Make SD session key more random.
374 kes Add retry for SQLite opening db if it fails. Probably helps
376 kes Suppress extra error messages during batch insert failure.
378 kes Add jcr to timer packets so if killed message can be sent to job.
379 kes Add JobId to all Dmsg() output.
380 kes Put some FD auth code on dbglvl rather than fixed.
381 kes Return insert attributes error message in db msg buffer to avoid
382 false error messages. Helps fix bug #966.
383 kes Separate batch init error messages. Probably helps fix bug #966.
384 kes Make SD code that contructs attribute insert check string lengths
386 kes If Dir gets an error during inserting attributes, cancel SD.
387 This reduces unnecessary error messages.
389 kes Correct search boolean for getting Volume info
390 ebl Cleanup batch insert code. Probably fixes bug #965.
391 kes Back out one small change to the reservation system (reserving a volume).
392 kes Rework how a Volume is mounted. It is now much more intelligent and
393 will always attempt to use any mounted volume if possible and reduces
394 calls to the Director asking about volumes.
396 kes Turn off some code when batch insert not enabled.
397 kes Edit FD name in connect error messages.
398 kes Rework the reservation system to take into account that the Director
399 might give us a Volume that is different from the current one being
400 used, and to ensure that we don't exceed Maximum Volume Jobs.
401 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
402 fatal error with multiple jobs running'
403 kes Add more debug code in reservation system.
404 kes Implement maxvol-test to check bug #947.
406 kes Add code to handle tray monitor separated from Win32 FD.
407 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
409 kes Add missed return in fixing verify bug -- trunk only.
410 ebl Fix a command parser issue causing a director segfault.
411 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
413 kes Increase the max block size to 4MB fixes bug #957.
414 kes ERABT if user sets min block size > max block size. Fixes bug #956.
415 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
416 is not properly mounted (recognized) during a poll.
417 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
418 Job that has differences reports Verify OK.
419 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
421 ebl Add an option to operate on all pools with update vol parameters.
422 This complete the project 20. Patch from Nigel Stepp.
423 ebl Add history support to bconsole when using readline.
424 Using Ctrl-D to exit doesn't update .bconsole_history
425 kes Modify new volume algorithm to use max MediaId for generating next
426 volume number rather than the count of Volumes. This should essentially
427 eliminate the failure rate if some volumes were deleted. Bug #921.
428 kes Begin implemention of Optimize Job Scheduling.
429 kes Implement restore callback that Dirk and I agreed on for bat
430 restore. This fixes bug #928. Restore of backup of zero files fails.
431 kes Fix SQL Catalog logging which broke with new db_escape_string
434 Release Version 2.2.4
436 kes Fix bacula_cats.def for new db_escape_string().
437 kes Increase size of name string when FD making connection to SD.
438 May fix bug #953. FD->SD connection failure.
440 kes Add code to help Dan debug 2drive-incremental-2disk test.
441 kes Add code to try to fix bug #908.
442 kes Add waits to multiple exit detection code to try to force pid
443 file to always be deleted.
444 kes Restore good dev.tar.gz to rescue set appropriate binary property.
446 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
447 trying to switch drives by checking for blocking before unblocking.
449 kes Cancel storage daemon in all cases where FD reports error. This
450 should fix virtually all cases of bug #920.
451 kes Fix db_escape_string() for MySQL which did not compile.
453 kes Fix error message that was clobbered when Dir tells SD it does not
454 have write permission on Volume. This should fix a minor point
455 in bug #942, but not the main problem.
456 kes Add code to cancel job in SD if FD connection fails. This should
458 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
459 dvl Pass jcr and db into db_escape_string() to enable better escaping
461 kes Fix migration code to get correct Volume name with multiple volumes
462 by skipping |. Fixes bug #936.
463 kes Implement patch supplied by Landon to fix bug #944 where using
464 TLS with bconsole uses 99+% of the CPU.
465 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
467 kes Move patches into patches directory.
469 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
472 ebl Using 'm' in bconsole will show messages like before,
473 and not memory usage.
474 kes Fix bug #935, and probably also bug #903 where files were not
475 restored. MediaId was not properly set in JobMedia record after
478 kes Suppress chown and chmod error messages if the FD is not running
481 kes Apply Martin Simmons' patch that should turn off the new API usage
482 when batch insert is turned off allowing building on older
484 kes Add ./configure search in qwt-qt4 for qwt package
486 kes Bacula is now free of 3rd party GPL copyrighted code!
488 kes Add guid_to_name.c/h which replace idcache.
489 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
491 ebl Detect if new PosgreSQL batch insert API is present.
492 kes Correct incorrect mempool call causing Director crash. Occurs on
493 systems without va_copy().
494 sb Update spec files for 2.2.1 release
496 kes Fix memory pool call in ua_output.c. bug #934.
497 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
498 Add test program to fnmatch.c
500 kes Integrate patch to README.vc8 from
501 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
502 edit it to get it into Unix patch format.
503 kes Implement mkpath.c to replace old FSF makepath.c
505 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
507 Release Version 2.2.1
509 kes Update POTFILES.in
510 kes Cleanup a few underquoted AC_DEFUNs in configure
511 kes Apply patch from Martin Simmons that adds a test for va_copy to
514 kes Fix bug #921 by increasing the number of tries to create a new volume
516 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
517 can be called multiple times. Implement a version for machines
518 without va_copy() that gets a big buffer.
520 kes Integrate more portable zone offset code into bsmtp.c
521 Submitted by Attila Fülöp.
523 kes Fix bad SD->FD return status reported by
524 (James Harper) <james.harper@bendigoit.com.au>
525 ebl Fix a bug in read_close_session which return random status
526 thanks to James Harper
528 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
529 and directory names during restore of single file/directories.
530 kes Add sanity checks to .sql command when string is empty. Hopefully
531 that will resolve Dirks Director crash.
533 kes Apply patch submitted by Martin Simmons that corrects a seg fault
534 in the bsmtp chat subroutine when debug is >= 10.
536 kes Fix Director crash when running bat SQL queries.
537 kes Add David's notes on Item 8: Copy pools.
539 kes Rework projects file to be current and ready for a vote.
540 kes Enhance lex scanner error message.
542 kes Tweak LICENSE file to mention BSD code.
543 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
544 if specified on the ./configure.
545 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
546 This class is intended to allow us to open a second bsock to the
547 Director while in the restore subdialog.
549 kes Fix configure to create bat Makefile before creating dependencies.
550 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
551 kes Add a tooltip to the tray monitor.
552 dvl Set the Director's PID file before dropping privs. This fixes
555 kes Update AUTHORs file
556 kes Increase the default max concurrent jobs to 20 in FD and SD to
557 correspond with the default .conf files.
558 kes Rewrite the Win32 service routines. This eliminates the 3 copies
559 some different, of the same file created by RN when porting the
561 kes Rearrange some of the Win32 directories and the placement of the files
563 kes Set DEVELOPER flag in version.h
565 ========================================================================
566 Release Version 2.2.0
568 kes Apply a second doc patch from Marc.
569 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
570 improves the tips section that discusses how to setup multiple
573 kes Update bat README file.
574 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
575 corrects a typo in the Recycle status check in db_find_next_volume().
576 This will probably fix a number of annoying problems with multiple
578 kes Modify most of dird/msgchan.c to use bsock class calls rather than
579 bnet calls -- no functionality change.
581 kes Modify the Verify output to specify if files are missing on
582 the Volume(s) or disk. Fixes confusion in bug #916.
583 kes When more than one Volume is read in a migration job, the last
584 Volume bytes reported are from the last read volume rather than
585 the last written volume. Fixed. This fixes bug #910.
586 kes Fix display of Recycle flag after update volume=foo recycle=yes.
587 It previously printed New Recyle flag is: no. This fixes bug
590 kes Correct seg fault when switching tape drives during restore.
591 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
592 be used until after 2.2.0 release.
594 kes Remove fnmatch() in SD that permitted wild card specifications.
597 kes Fix %g in filename returned by SQL for browse tree reported by
599 kes Fix configure so that it puts config.out in the cwd rather than
601 kes Attempt to fix the locking problem reported by Eric in bug #906.
602 kes Make berrno class to leave errno unchanged after constructor call.
603 kes Make bnet_server use the heap rather than the stack to allocate
604 its socket fd pointers to avoid a crash at termination. Problem
605 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
607 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
608 and putting it in depkgs-qt along with Qt4.3.
610 kes Rework code in acquire.c that switches drives for reading when
611 the Media Type does not match. This should fix bug #906
613 ebl Fix a director segfault during job setup #907
614 kes Correct seg fault in postgresql when first operation returns no
615 rows. Fixes Dirks File browser problem seg fault with bat.
617 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
618 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
621 kes Implement PopUp YES/NO dialog for bat.
623 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
625 kes Correct RunScript to terminate job in FD on failure.
626 kes Change abort_on_error and AbortJobOnError to fail_on_error
627 and FailJobOnError in RunScripts.
628 kes Minor tweaks of code formating in RunScripts, principally to
629 avoid depassing 80 columns.
631 kes Eliminate one #ifdef Win32 in bsmtp
632 kes Implement grow tool to grow a file for testing very large databases.
633 kes Add big-vol-test to test Bacula seeking with > 5GB.
636 kes Modify find_next_volume() to return all values in Media record.
637 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
641 kes Update Release notes
643 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
644 Warning, in previous beta version, all media get from scratch keep their
647 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
648 This should fix bug #842. Made a note to look at removing the temp
649 files at the end of the install.
650 kes Add ability to mount and unmount a file device providing it is
651 marked as being removable and has the appropriate mount and unmount
652 commands defined in the Device resource. This fixes bug #830.
653 kes When applying a storage override, release all previous storage
654 definitions rather than just prepending the new storage.
655 This should prevent a good deal of confusion.
657 kes Implement ./configure search for qwt libraries.
659 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
660 Win32 FD. This should fix bug #893.
661 kes Remove an unnecessary beep in Win32 init code.
662 kes Update copyright dates in Win32 executable about boxes.
663 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
664 code with a BSD getopt.c and getopt.h.
665 kes Remove sched.h from the Win32 compat directory -- not used.
666 kes Remove the Exit menu item from the Win32 tray monitor. If you really
667 need to shut it down, do it through the services panel or the command
669 kes Remove some inappropriate Bacula FSFE copyrights.
670 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
671 kes Fix regress config non-portable test as pointed out by
672 Florian Heigl <florian.heigl@gmail.com>
673 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
674 as pointed out by Florian Heigl <florian.heigl@gmail.com>
676 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
677 Reported by Frank Sweetser.
681 kes Fix client-only build.
682 kes Integrate client-only fixes for bsys (initgroups) and conio from
683 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
684 kes Make arguments to get_scratch_volume() in same order as other
686 kes Rework the prune_volumes() subroutine so that after purging and
687 no volume found in desired pool, it will check for a scratch
688 volume. This prevents recycling the whole scratch pool.
689 kes Add code to status storage to print boffset_t (largefile support).
691 kes Move qwt (Graphics libarary for Qt4) to depkgs.
692 kes You now need a --with-qwt=<dir> to be able to build bat.
693 kes Update src/win32/cats/bacula_cats.def to include the new
694 db_get_query_dbids() call on Win32.
696 kes Correct a problem when selecting a scratch volume and moving
697 it to another pool that lost some columns.
698 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
699 kes Enhance Autochanger error messages to include Volume and device name.
700 kes Rework prune_volumes() code to take account of InChanger flag,
701 and to handle recycling volumes going to the Scratch pool and
702 current pool because the RecyclePool directive.
703 kes Implement a better and more efficient db_get_query_dbids() to
704 handle creating and passing back a list of DBIds.
708 kes Start work on new more efficient DBId subroutine. First use
709 will be for recycling volume to Scratch inchanger.
710 kes Increase number of JobIds in pruning from 1000 to 10000.
711 This to be replaced by above routine.
712 kes Begin implementation of building Qt4 on Win32.
713 kes Correct typo in fix I added for bad TLS shutdown.
714 kes Pull 2.0.3 patches into patches directory.
715 kes Update Release notes. Include qt-console in line count.
716 kes Update Projects file.
718 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
719 bug in migration code where a job that spanned two volumes
722 kes Implement new BST_DESPOOLING blocked state. Change from locking
723 during despooling in SD to blocking. This means that other threads
724 can work with the device structure, in particular the reservations
725 system while despooling.
727 kes Fix return in reservation message queue that missed clearing
728 the jcr lock (implemented 26Jun07 below).
729 kes Rename a number of dev methods to make locking function names
731 kes Document locking in lock.c. Move lock structures to new file
734 kes Move reservations message lock to lock jcr only this
736 kes Move main SD locking code into lock.c (new file).
737 kes Update Win32 build to include lock.c
741 kes Dirk committed the qwt library code for drawing graphs in bat.
742 kes Tweak install of qwt so that it is integrated with ./configure.
744 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
745 out by Eric (my typo).
746 ebl Fix configure.in to get batch mode enable
747 kes Return correct string from authenticate.cpp in bat when connecting
749 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
750 spurious line drops when using TLS.
751 kes Do not file reparse points when restoring a file that already
754 kes Implement Windows reparse points -- similar to directories, but
755 we do not descend into it. This is a first cut. They seem to
756 be backed up, but restore is not yet tested.
757 kes Remove restore_blocking in tls code when shutting a socket to leave
758 it in blocking mode. Hopefully this will fix the encryption bug
759 reported by Frank Sweetser.
760 kes When opening a file for backup, tell the OS that we are going to
761 read it sequentially -- optimization.
762 kes Change variable names in authenticate_director() to not conflict
763 with member names in bat. Caused great confusion with compiler,
766 kes Queue openssl error messages in case of comm problem.
767 kes Do shutdown() call if socket terminated.
768 kes Remove some duplicated code in tls.c
769 kes Move more of the bsock member variables into private and access
771 kes Add Frank Sweetser's tls-test to the regression suite.
773 kes Add Swedish sv.po file
775 kes Don't print clock skew message in FD if less than 3 seconds diff.
776 kes Add a bit of VSS info to status client.
777 kes Implement a first cut of Vista VSS, using Win2003 code.
781 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
782 loaded tape but uses first drive).
783 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
784 This was indeed a Win32 issue.
786 kes Simplify search of autochanger for in-use Volume.
787 kes Fix exit condition of check for in-use volume. kes Remove
788 inappropriate my_postgresql_free_result() in db_close()
790 kes Fix bad return in FD when encryption signature not found.
791 Probably caused a crash.
792 kes Inhibit missing encryption signature error messages for
793 file types where no signature computed.
794 kes Correct inverted check on autochanger in reservation system.
795 kes Tweak debug code in autochanger reservation.
797 kes Add some additional locking in the cats directory in subroutines
798 that modify packet variables called from batch insert.
799 kes Rework how dcrs are allocated. new_dcr() can now be called
800 with an existing pointer, and it will simply clean it up.
801 This allows the reservation system to test various different
802 devices, and will permit easy device changes.
803 kes A bunch of changes all over to handle new new_dcr() calling
805 kes Work more on the Volume management in the SD. Remember Volumes
806 for tape drives and for autochangers (even virtual disk changers).
807 kes When looking at the Volume list to reserve a drive, handle
808 autochanger names correctly by interating through the changer
809 devices. Also call the Director to see if a Volume is suitable
811 kes Fix some bugs in bscan. Make sure all media records are written.
812 Make sure that valid JobMedia records are written for disk files.
813 Previously they were completely wrong.
814 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
815 that the URLs don't change and so that the developers will all
816 work off the same copy. Rebuild from scrach.
817 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
821 kes Fix seg fault in FD from incorrect digest size.
822 kes Fix argument to non-OpenSSL crypto.c subroutine.
826 kes Remove a few malloc()s from the encryption code.
827 kes Use the class calls to bsock in filed/backup.c and restore.c in
828 place of the old bnet_xxx code.
829 kes Implement code that does an on the fly calculation of the
830 signing digest during restore of encrypted files. It makes
831 a best guess at the algorithm, and if it is not correct, will
832 then revert to the old code which reads the file after it is
834 kes Implement at least one missing crypto stream in stream_to_ascii()
835 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
836 #877 where a reload with bad syntax causes Dir to exit.
838 Cut: 2.1.14 beta (not released)
840 kes Do not free a volume on a tape drive until another volume is
841 mounted and read, or the autochanger unloads the volume.
842 This should help the SD re-use volumes that are already mounted,
843 and should fix bug #886.
844 kes Apply patch from user brettedgar that allows gnome2-console include
845 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
846 kes Apply patch from Lucien Weller that fixes day of week calculation
847 because of DST flag problem. Fixes bug #887.
849 kes Move find_next_appendable_volume() to after acquiring a valid device
850 in reserve.c. This fixes bug #864 -- confirmed by reporter.
852 kes Unable to reproduce bug 872. However added additional testing for
854 kes Bug #874 resolved by documenting SQLite limitations.
855 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
856 kes Bug #881 resolved by removing typo in mtx-changer script.
857 kes Made Frank Sweetser's wiki the official Bacula wiki with his
858 approval. Added a link to the wiki on the web page, and implemented
859 a backup from http://paramount.ind.wpi.edu
861 kes Fix update allfrompool to pass pool name.
863 kes Convert to pure GPL v2 license.
864 kes Fix sscanf problems reported by Peter Buschman that caused
865 a bus error on Solaris.
866 kes Rework (simplify) the select prompt in bat.
867 kes Move get_jobid_from_tid() into lib and create a
869 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
870 should definitely fix the problem of lost error messages in the
872 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
873 kes Eliminate tcpd.h from the project. Enclose the #include from the
874 library with extern C ...
875 kes Add print of signal name when a signal is trapped.
879 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
881 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
882 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
883 makes SQLit3 run 30 times faster, though a bit less safe.
884 kes Implement --with-batch-insert in configure and detection of thread
885 safe libraries. It is on by default, but turned off if no thread
886 safe library (e.g. SQLite 2) is available.
888 kes Fix Bacula PostgreSQL buffer overruns.
889 kes Do better checking for NULL results returned from PostgreSQL;
890 implement retry for failed queries; clear results buffer after
891 failed query. Hopefully this will correct the PostgreSQL failures.
893 kes Implement algorithm to handle only one appendable volume with
894 Prefer Mounted Volumes = no.
895 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
896 returned from a query.
897 kes Make volume lock recursive.
898 kes Implement an additional volume reservation algorithm that
899 starts by considering all reserved volumes then uses the
900 old brute force algorithm of searching the resources to
901 find a suitable device.
902 kes Add new reservations debug code and refine the old code.
903 kes Update the win32/dll/bacula.defs file.
905 kes Tweak reservations algorithm to permit a few more cases, i.e.
906 volume reserved, but on different drive, ...
907 kes Enhance SD status to include Pool and Media Type for drive in a
908 more readable format (a bit longer).
909 kes Fix PostgreSQL double free.
911 kes Minor refactoring of restore decryption code.
912 kes Add code to smartall.c to detect double free of a buffer.
914 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
915 so that bsmtp will create a correct email address (mailbox only).
916 kes Modify 'memory' command so that the buffers are listed as 'In use'
917 to avoid confusion with Orphaned buffers.
918 kes I reworked the OpenSSL include/lib flags to be handled in
919 the standard Bacula way, which should fix bug #863 concerning
920 non-standard OpenSSL libraries.
922 kes Implement Help Browser window for bat.
923 kes Fix reload bug that reset StorageId to zero.
925 kes Fix TLS #ifdefing when TLS turned off.
926 kes Ensure that when labelling a tape with Slot=0 that InChanger
928 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
930 kes Add StartTime to final uar_sel_jobid_temp query so that we can
931 add DISTINCT (required by PostgreSQL).
932 kes Implement BSOCK authenticate_director() method. Eventually will
933 authenicate all daemons.
934 kes Move several more functions into the BSOCK class.
936 kes Add code to tell the OS that we no longer need a cached
937 file that we were reading. In findlib/bfile.c. Also,
938 only cache files that we are reading. Thanks to
939 Tobias Oetiker <tobi@oetiker.ch> for the idea.
940 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
941 kes Implement script to automatically generate cats and dll .def
943 kes Update README.mingw32 to include new .def file generation.
944 kes Correct typo in UTF-8 error message as reported by:
945 jhernandez <julianhernandez@gmail.com>
946 kes Add additional sm_check() code on debug level 1.
947 kes Set default debug level to 1.
948 kes Trap SIGABRT in attempt to get traceback.
950 kes Reduce bat connect timeout from 30 to 15 seconds.
951 kes More restructuring and implementing BSOCK class in place of
953 kes Remove a few unnecessary malloc() tests in crypto code.
954 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
955 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
956 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
958 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
960 kes Fix Verify InitCatalog. The attributes were not pointing to the
961 correct saved location.
962 kes Implement message callback so that GUI is sure to get all
963 daemon messages. Currently displayed in a dialog in bat.
964 kes Ignore SIGUSR2 (Bacula timer) in bat.
965 kes Apply regress patch from bug #859 to allow regress to work
966 with Solaris compiler.
968 kes Begin adding TLS support to bat.
969 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
970 clean up lex.c and make it more readable.
972 kes Move more bnet functions into the BSOCK class.
973 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
974 kes Complete change of berrno strerror() method to bstrerror()
978 kes Cleanup incorrect email addresses in bsmtp.
979 kes Make bat display initial messages rather than discard them.
981 kes First cut of adding .mod to the run command.
982 kes Implement auto display of messages in bat.
983 kes Enhanced preferences to allow all Bacula output to be
986 kes Try to make bsmtp date routines more generic.
987 kes Fixed bug #856 autochanger documentation.
988 kes Rework bsmtp date editing for Win32. This fixes bug #854.
989 kes Add new cats entry point so Win32 builds.
991 kes Attempt to fix bsmtp date editing on OSes without %z editing.
993 kes Do better checking for the MySQL 64 bit libraries looking for both
994 .a and .so libraries.
995 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
996 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
997 kes Require the thread safe version of MySQL during configure. Thanks
998 to Andre Noll for pointing this out.
999 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1000 continuing in migration code.
1001 kes Apply implementation of tray-monitor font derived from gnome-console
1002 submitted by Andreas Piesk <a.piesk@gmx.net>
1004 kes Eliminate important memory loss in SQLite
1005 kes Fixed the batch insert MySQL thread specific data that was not
1006 being freed. See cats/mysql.c:db_thread_cleanup().
1007 kes Fix restore before command.
1008 kes Convert old hdr.name to name() in a few places.
1009 kes Implement update jobid command.
1010 kes Return all time_t dates in db_get_job_record()
1011 kes Stop watchdog in SD earlier.
1012 kes Put Pool just after Storage in please mount message.
1013 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1016 kes Update the po files.
1017 kes Fix Verify InitCatalog by making it cache attributes.
1019 kes Change name bacula-bat to bat for man 1 page to correspond to
1021 kes Check for client and store NULL pointers in status command. This
1023 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1024 kes Fix sign extended editing of %p.
1025 kes Clean out a little old #ifdefing in cats/mysql.c
1027 kes If time diff between DIR and FD is more than 600 seconds convert
1028 INFO message to WARNING.
1029 kes Implement heap size display in status for all daemons.
1030 kes Attempt to fix MySQL db open memory loss (not successfull).
1031 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1032 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1033 Query. This looks like a MySQL but but by doing extra releases,
1034 the memory goes away. This should fix bug #847.
1036 kes When backup fails, cancel SD before waiting for sd termination.
1037 kes If SD is waiting for FD to connect during cancel, wake up the
1039 kes Fix fsf code so that errno is correctly reported.
1040 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1042 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1043 so that Bacula doesn't later stumble into a seg fault.
1044 kes Use the term Restore Client in the restore Job report.
1045 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1046 the original job's FileSetId.
1047 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1048 spooling in migration jobs. Not yet tested.
1049 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1050 reading conf file from a pipe. However, do it with open_bpipe()
1051 rather than popen. Not yet tested.
1053 kes Fix an ugly bug where the VolCatBytes were getting updated
1055 kes Implement bconsole memory command that prints current memory
1056 usage, plus smartalloc dump.
1057 kes Clarify some error messages in backup, admin, and migrate.
1058 kes Shrink label dialog to smaller size.
1059 kes Invert Cancel OK buttons on restore to be OK Cancel.
1060 kes More strerror() to bstrerror() conversions.
1062 kes Start implementing bstrerror() in place of strerror().
1063 kes Stripping path -- seems to work.
1065 kes Prevent door and port files from being restored (mostly
1067 kes Free an unreleased buffer in compat code.
1068 kes Change console Job name from *Console* to -Console- to eliminate
1069 Win32 filename problems. Put Win32 path separator when creating
1070 Console file. This fixes bug #846.
1071 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1073 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1075 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1076 to force Win32 error message.
1078 kes First cut strip path. The data should be passed to the FD,
1079 but nothing is done with it yet.
1080 kes Enhance the digest and signature routines in the crypto
1081 library to accept a JCR and to use it to print error messages
1082 so that they will go in the Job report rather than the daemon's
1084 kes Simplify some of the verify signature code.
1085 kes Simplify a few of the alternative returns in the signature
1088 ebl Use only POSIX regex instead of GNU regex in breg.c for
1089 File relocation. It fix broken freebsd compilation.
1090 kes Convert all other Dir files to use new ua class message
1092 kes Tentative fix for missing digest signature in bug 807.
1093 kes Correct handle problem in new win32_ftruncate routine.
1094 kes Convert ua_purge.c and ua_update.c to use new ua class
1095 message routines for bat.
1097 kes Correct incorrect installation of LICENSE in Win32 installer.
1098 kes Display LICENSE at the beginning of the Win32 install.
1099 kes Attempt to correct the need for the png files to be installed
1101 kes Reapply my bat.conf install script in qt-console. I think I
1102 editted bat.pro instead of bat.pro.in and it was lost.
1103 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1104 the /var/lock/subsys for subsysdir. Also corrects typos in the
1107 kes First cut update job.
1108 kes Correct configure to include qmake of src/qt-console directory.
1110 kes Make restore job yes/mod/no print in one command so GUI works.
1111 kes First cut implementing backup and restore client.
1112 kes Correct editing in Verify output that caused a seg fault.
1114 kes Insure that bat.conf is not overwritten during installation.
1115 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1116 while I was implementing migration in March 2006 !
1118 ebl Cleanup file relocation, using char *RegexWhere instead of
1119 char *where + bool where_use_regexp
1120 kes Update some manpages and add bat manpage.
1121 kes Make a first cut at converting bacula.spec.in for bwx-console
1123 kes Apply patch from John Goerzen to add hostname as fourth argument
1124 to make_catalog_backup script.
1125 kes Fix typos I introduced into bsmtp.c
1126 kes Make pm_strxxx() routines handle input of NULL pointer. This
1127 is to protect from NULL pointers returned from SQL databases.
1128 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1129 kes Add more debug to FIFO code -- fix fifo regression test.
1131 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1132 kes Add thread timer to bnet_connect() to break from OS if wait time
1135 kes Update Win32 build to include new files, new symbols, and
1137 kes Implement socket level heartbeat (tcp_keepidle)
1138 ebl Commit File relocation patch
1139 kes Make bat have 'make install' target.
1140 kes Warn during install if old gnome-console binary found.
1141 kes Warn during install if old wx-console binary found.
1142 kes Add -8 option to bsmtp command line to add content type utf-8.
1143 Fixes bug #809. (Character coding problem in bsmtp).
1144 kes If < is found in target (from, to, cc) then do not enclose the
1145 target in < > in bsmtp. Fixes bug #772 (malformed address).
1146 kes When printing certain items in dbcheck, stop after 300000.
1147 Fixes bug #822. (dbcheck loops).
1148 kes Incorrect status in Dir after waiting for mount with poll set.
1151 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1153 kes Print waiting to reserve a device every 5 mins.
1155 kes Don't call close_part in label.c if tape and relabel.
1156 kes Don't free volume if busy in close() -- should help with
1158 ebl Fix #824 RunScript bug (After script could be execute twice)
1159 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1160 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1161 Add a regression script to test RunScript
1163 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1166 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1167 deprecated. No additional bugs will be fixed, and they will be dropped
1168 in a future release (probably 2.4.0).
1169 kes Change name of wx-console to bwx-console to make it more Bacula
1171 kes Change the name of gnome-console to bgnome-console to make it
1174 kes Some time in March, a Feature Request with patch from Jorj Bauer
1175 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1177 The ability for the director to validate a Client (FD) CN against
1178 an arbitrary set of patterns rather than the hostname, with
1179 A new 'TLS Allowed CN' set of directives which are implemented
1180 in the Client resource. Then pattern matching is used in place
1181 of hostname matching against the Certificate's CN. As an example, we
1182 have certificates which (a) use a local CA, and (b) have a CN of the
1184 kes Add new/changed entry points to Win32 build
1185 kes Create unaccepted-projects for projects that are not accepted.
1186 kes Simplify locking in the reservations system.
1187 kes Add more debug code in reservations.
1188 kes Make sure error condition on reserving a volume is handled correctly.
1189 kes Correct handling of volume_in_use.
1190 kes Correct handling of initializing a device.
1191 kes Move handling of broadcasting releasing a device into release_device().
1192 kes Correct attaching dcr to dev so that it is only done if device
1193 is properly initiated.
1195 kes Locking debug level tweaks in SD.
1196 kes Tweak new Volume code.
1198 kes Add exec external-command [wait-seconds] to bconsole. This
1199 executes the external-command. Note! normally external-command
1200 should be enclosed in double quotes.
1201 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1202 it should normally be off in a production system.
1204 kes Implement die command for SD so that we can force it to dump.
1205 kes Implement SD lock debug code.
1206 kes Implement new algorithm for keeping Volume list in SD. It
1207 is now owned by the device.
1209 kes Implement new code for freeing in use volumes that should
1210 resolve if not all, some of the problems of multiple drive
1211 tape conflicts described in bug 801.
1213 kes Fix gui/bacula-web/images files in svn.
1214 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1216 ebl Fix a bug in batch mode (in string escape)
1217 kes Correct migration prune SQL typo that crept in in a
1218 recent 2.1.x change.
1220 kes Move bnet_despool() into class in bsock.c
1221 kes Modify job report to include director name and Build OS.
1222 kes Move drop root privilege and check_catalog() before fork.
1223 kes Add update database scripts (version 9 to 10) to updatedb directory.
1225 ebl Check size and age of each file after its backup to see if
1226 it has changed during backup, if 'checkfilechanges' is set.
1227 The FD will do an extra check (stat(2)) after
1228 each file backup. mtime, ctime and size are compared with
1229 'before backup' information. If time or size mismatch, an
1230 error message will be generated. You must upgrade FD to use it.
1232 kes Make database name and user configurable
1233 --with-db-name=xxx --with-db-user=xxx
1234 kes Add back database type to message.c for debugging.
1236 kes Implement dir_sql() which issues an SQL query.
1237 kes Modify bat medialist to use dir_sql() and do some minor C++
1238 formatting as well as eliminating a number of pointers, simplifing
1241 kes Fix some of the mtx-changer grep commands for tape label readers.
1242 kes Convert a number of bsendmsg into the appropriate send/warning/error
1243 message class calls.
1244 kes Suppress the using database message in the .sql command.
1245 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1247 kes Add context menu for floating a window.
1248 kes Some minor cleanup and name changes in qt-console
1249 kes Add doing mt setblk 0 in Win32 mtx-changer.
1250 kes Apply Martin's bug fix to move definition of ENODATA for
1252 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1253 sqlite2 and sqlite3.
1255 kes More pruning cleanup.
1256 kes Turn on wait_for_drive by default in mtx-changer.
1257 kes Turn on Batch insert code by default as it now passes regression.
1258 kes Add ./configure --enable-bat to enable building of Bat.
1259 No install yet though.
1261 kes Implement a new .sql command for bat.
1262 kes Implement code to turn off pruning in obtaining the next volume.
1263 Pruning is turned off for the status dir command, but turned on
1264 for SD requests and for the list nextvolume command.
1266 kes Correct Qmsg() that was not updated correctly when committing a
1267 previous change (probably the recent TLS patch).
1269 kes Write new subroutine is_volume_purged() that explicitly checks
1270 if the Volume is purged, and if so marks it as such. This should
1271 resolve problems reported about needing to mount twice to recycle
1273 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1274 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1275 amount of duplicated code.
1276 kes Do volume pruning only for the Media Type desired (reduces pruning time
1277 if multiple Media Types are in the same pool).
1278 kes Implement more detailed info in the Job report for the Bacula version
1280 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1282 ebl Add bbatch tool to bench database and insert mode.
1283 Fix sql quote stuff in batch mode
1284 Fix sql stuff for mysql
1286 kes Correct problems with am/pm scheduling. Fixes bug #808.
1287 kes Implement new prunning code that prunes up to 1000 jobs at
1288 the same time. The same technique can be applied to a number
1289 of other prune/purge subroutines.
1290 kes Add an insanity check when starting a new tape job to ensure
1291 that the tape position has not been changed. If so fail the
1293 kes Fix Win32 build for dlls to add the folllowing:
1294 src/lib/bsock.c -- new file with new entry points
1295 src/lib/dlist.c -- new entry points
1296 src/cats/sql_create.c -- new entry point
1297 src/cats/sql_cmds.c -- new DATA item exported
1299 ebl batch mode cleanup bscan-test is ok now.
1300 kes Implement SD code to check length of disk volume before appending.
1302 kes Correct return status on db_batch... routines.
1303 kes Add call to db_write_batch_file_records() to migration code.
1304 ebl Fix AfterJob timing
1305 kes Move the checking of the database in initializion of the Director
1306 to after we drop privileges. This avoids the need for both root
1307 and bacula access to the DB.
1308 kes Correct a misplaced variable definition in src/filed/backup.c
1309 kes Correct how the new batch insert db_create_attributes_record()
1310 uses the arguments. Caused a seg fault in bscan.
1311 kes Implement lock() and unlock() methods in DEVICE class.
1312 Implement block() and set_block(xx) methods in DEVICE class.
1313 kes Modify bnet_connect() so that it uses time() to check for the
1314 wait time expiring (on some OSes, some system calls may not
1315 return immediately).
1316 kes Modify Verify to obtain the previous JobId when it is actually
1317 running rather than at schedule time (as it was in 1.38.x).
1318 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1320 kes When checking pid in pid file, continue running if the pid is
1321 the same as ours. This occurs on IRIX after a system crash.
1324 kes Extend new GUI API.
1325 kes Make the ua structure a class, and implement send_msg(),
1326 error_msg(), warning_msg(), and info_msg().
1328 kes Apply fix from for building wx-console on the Mac from
1330 kes Implement new select mechanism for GUI programs.
1331 kes Reorganize initialization of stackedWidgets in bat.
1333 kes Add updated nagios plugin supplied by Christian Masopust.
1335 kes More bat implementation.
1336 kes File migrate bug with Pool Occupancy using mediaid instead
1337 of jobids. Fixes bug #795.
1338 kes Fix orphaned buffers in filed backup and verify due to
1339 crypto buffers not freed during errors. Fixes bug #789.
1340 kes Extend new GUI api code to tree commands.
1341 kes Ensure that tree and dot commands check console ACLs.
1342 kes Permit marking directory with trailing slash.
1343 kes Allow 20 console connections (instead of only 10).
1345 kes Add smartctl call to bacula-sd.conf as an example of getting
1348 kes Modify jobq.c to let simultaneous restore jobs run. This may
1349 cause them to fail if they cannot get a drive.
1350 kes Add Client Connect Wait to Storage daemon to permit users to
1351 modify the time the SD waits for a FD connection.
1353 kes Correct virtual changer check which was backwards. This caused
1354 volumes to be unloaded into slots already occupied.
1356 kes Apply Command ACL filter to JobId list in restore command.
1357 kes Correct typeo in var.c patch.
1359 kes Don't let Bacula prune File or Job records for the current Job.
1360 kes Fix variable substitution pad + inc bug reported (with patch)
1363 kes Correct SQLite log table index as reported by Luca Berra.
1365 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1367 kes Begin implementing new comm signals for API.
1368 kes Fix a few places in lib/message.c where the open fd may
1370 kes Continue implementing lib/bsock.c (real class). Make jcr,
1371 who, host, and port private. There are new methods to access
1372 them for non-class use. This required touching a number of files.
1374 kes Add LANG=C to autoconf/randpass so it works with languages other
1375 than English. Fixes bug #788.
1377 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1379 You will not be able to generate Include/Exclude list any more.
1380 It will be fixed soon.
1381 If you want to use this, you can apply
1382 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1384 kes Restore of sockets created false error messages because Bacula
1385 no longer restores sockets, but the code was still trying to
1386 set the attributes on a non-existent file. Reported by a user.
1387 ebl finish RecyclePool feature
1388 Media will takes Pool.RecyclePool
1389 when moving from Scratch to a Pool or when user will do
1390 update volume=xxx frompool
1391 To use it, add RecyclePool = aPool to your Pool resource
1394 RecyclePool = Scratch
1398 kes Expand new BSOCK class adding signal() and new BNET signals.
1399 kes Begin enhancing the dot commands adding a new API function
1400 that returns more information and will make it easier
1401 to interface to the Director from a program.
1403 kes Make DEVICE fd private. Its new name is m_fd, and can be
1404 obtained with dev->fd() outside the class. This is the
1405 first of many DEVICE members to be made private.
1406 kes Implement Michael Renner's idea on having a virtual disk
1407 changer. I made some minor modifications (e.g. I did not
1408 implement the Virtual Changer directive, but simply set
1409 the Changer Command to an empty string.
1411 kes Implement a BSOCK send() method that writes the whole record
1412 in a single write() request rather than in two.
1413 ebl add update volume=xxx recyclepool=yyyy
1414 volume takes recyclepool from pool when using update volume=xxx from pool
1416 kes Fix encryption deblocking bug, which caused some restored files
1417 to be truncated. This fixes bug #763.
1418 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1419 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1421 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1422 ebl Use btime_t instead of uint64_t in media patch.
1424 kes Optimize the use of the database a bit in the Status dir command.
1425 Only open it when needed, ensure that if any previous database
1426 was opened, it is closed.
1428 kes Correct VolCatBytes bug from media patch.
1429 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1430 in the case of orphaned records.
1431 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1432 and File records in 300K chunks to be more efficient. This
1433 idea came from Juan Luis Frances (if I remember right).
1434 kes Apply Eric's scratch patch that moves a purged Volume to
1435 the RecyclePool. Question: how is RecyclePool set? what
1436 happens to the ScratchPool?
1437 kes Apply Eric's media patch that collects read/write media
1438 times as well as byte counts. This patch requires a
1439 simultaneous upgrade of the DIR and SD. Note, there
1440 should be some way to turn off timing. I'm not sure
1441 times are in Bacula units.
1442 kes Apply Eric's batch-insert patch.
1444 kes Update projects list.
1446 kes Implement Include/Exclude file lists in FD as dlists using
1447 the new dlistString class. This permits efficiently having
1448 large include/exclude lists and completes project Item 25.
1449 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1450 console is authorized to cancel the job. This fixes bug
1452 kes Modify SD so that the VolCatJobs medium record is updated
1453 at the beginning of a Job rather than the end. This
1454 fixes bug #775 where exceeding MaxVolJobs caused jobs
1456 kes Added a mutex around getting and setting Volume information
1457 so that multiple simultaneous jobs will single thread.
1459 Switch to using Subversion
1460 kes Remove src/pygtk-console/ from configure
1462 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1463 plus the entrypoints.
1464 kes Apply patch supplied that corrects debug print
1465 in canceling jobs for max run time. Supplied as
1466 part of bug #621, which was previously fixed.
1468 kes Test on job_canceled() and sd_msg_thread_done inside
1469 loop starting the message thread to avoid a race condition.
1471 kes Remove rl_catch_signal from console.c as it conflicted
1472 with the header definition. Fixes bug #765.
1473 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1475 kes Clarify some stored/acquire messages to indicate if the
1476 problem is with read or append.
1478 kes Fix memory leak with storage ids in cats/sql_get.c
1479 kes Terminate watchdog earlier to avoid reference to released
1480 memory -- reported by Jason Austin.
1481 kes Move closing the database from jobq.c to the director daemon
1482 termination routine. This fixes memory leaks for shadow jobs
1483 (i.e. migration jobs).
1484 kes Free up the unique jobid chain items in migrate.c. This fixes
1485 a memory leak problem.
1486 kes Convert some ugly looking for statements to use foreach_alist
1487 in findlib/find.c. This will facilitate converting the structures
1488 to use dlist (for large include/exclude lists).
1489 kes Fix a bug in the btree.c and btree.h routines, then rename them
1490 rblist and add them to be built in src/lib. Include some new
1491 methods written by Rudolf Cejka that make the code more readable
1492 (hides some of the ugly casting).
1493 kes Add set_next() and set_prev() methods which make the code much more
1494 readable. Also add a new dlistString class that facilitates storing
1495 strings in dlists. To be used in the large include/exclude lists.
1496 kes Make some trivial modifications to lib/tree.h that use rblist
1497 rather than dlist for storing the tree links. This was suggested
1498 by Rudolf Cejka. The result of this is that the restore tree now
1499 uses red-black binary trees rather than simple linked lists. This
1500 should give rather dramatic speed improvements for directories
1501 contining large numbers of directories/files (more than 10000).
1503 kes Fix maxruntime bug #621.
1505 ebl Implement the include JobID in spool file name project.
1506 kes Reorder projects file in order determined by Jan 2007 vote.
1507 kes Implement item #12 on project list -- quick release of FD by
1509 kes Fix open of SQLite3 db where user does not have write permission
1510 so that DIR does not crash. Fixes bug #761.
1512 kes Add back missing @ in Win32 Makefile.
1513 kes Change 'Device not configured to autolabel' from INFO
1515 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1516 which should restart an indefinite # of times.
1517 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1518 other DIR specifications.
1520 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1521 Fix path quoting in SQLite scripts.
1522 Fix problems with SHGetFolderPath.
1524 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1526 kes Fix Job restart on error bug that promotes an Inc to a Full
1527 backup. This should fix bug #755.
1528 kes Add qt-console and first cut of code.
1532 kes Fix Bacula->Documentation link on Win32 to point to index.html
1533 instead of bacula.html. Fixed bug #750.
1534 kes Return JobId in db_get_job_record() when JobId==0. This should
1536 kes Do not release source pointers when restarting a failed job.
1538 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1539 This *should* fix bug #747.
1540 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1543 kes Modify USTORE constructor to set an empty store_source string,
1544 and don't copy the store_source string in a cancel. Hopefully
1545 this will fix Arno's seg fault, bug #744.
1546 kes Add back code to disable conio in configure. Fixes bug #743.
1547 kes Correct the Options scanner in the FD to correctly handle
1548 SHA1 option, which was eating the next option. Reported by
1550 kes Add code to indicate when the SD is spooling, spool wait, and
1551 despooling as requested by Alan Brown.
1553 Version 2.0.0 released: 4 January 2007