1 Technical notes on version 2.3
5 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
6 kes Start PluginOptions string, and refactor a bit of ua_run.c
7 ebl Apply Allan patch that permit to reset recyclepool.
9 kes Test patch -- possible fix or improvement for bug #1053
10 kes Refactor FD and SD status commands to permit new API code in
11 SD, and to fix Win32 build.
12 kes Win32 build is now working.
14 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
15 some ideas in patch from Scott Bailey.
16 kes Begin implementation of duplicate Job control.
17 kes Fix some of Win32 build after recent additions.
18 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
19 which causes the FD to detect whether or not the OS has the
20 honor no dump bit (*BSD systems), and if so, to skip backing up
21 any file with this bit set. The feature is enabled by setting
22 'honor no dump flag = yes' in the Options section of a FileSet.
24 kes Correct po warning message with datarootdir
25 kes Implement more code in dird.c to put configuration parsing in
26 a class rather than use globals.
27 kes Restructure SD status command for implementation of bat API
30 kes Suppress incorrect 'Will not descend from x into y' messages.
31 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
32 daemon globals used by parser.
33 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
35 kes Fix free of plugin_list when none exists.
37 ebl Apply accurate project patch.
39 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
40 on non-mempool object)
41 kes First cut of converting FD .status to work with bat API.
43 .status client=XXX header
44 .status client=XXX running
45 .status client=XXX terminated
46 kes Implement first cut of Copy Job.
47 kes Implement Catalog in Pool resource. It overrides catalog specified
48 in the Client resource.
50 kes Apply patch (with some difficulties) from Joao Henrique Freitas
51 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
53 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
54 ftruncate() actually works. In the case of some (cheap) NAS devices,
55 it does not, and so recycling NAS Volumes does not work. The code
56 simply unlink()s the file, then recreates it. This fixes bug #1011.
58 kes First incomplete cut of big malloc blocks for htable.
59 kes Tweak plugin code.
61 kes Plugin debug code + tweak a couple bat dialog layouts
63 kes Fix creating first JobMedia record during Migration to include
64 proper index. This caused slow restores of migrated jobs.
65 kes Temp fix to plugin name file_index.
66 kes Bacula backed up and restored a MySQL database.
68 kes Implement plugin restore.
69 kes Implement parsing of db_driver to give db_type index.
71 kes First cut of plugin restore code.
72 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
73 and do not strip paths on symbolic links.
74 kes Set catalog backup database and user name from values specified on
76 ebl Fix #1031 about wrong pool source information in job report.
79 kes Remove a redundant jcr argument to find_files, match_files, and
81 kes Implement '.status dir header|scheduled|running|terminated' that
82 prints the requested status section. With the exception of the
83 header, the other reports have fields separated by tabs (\t).
85 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
86 a resource embedded run command to find a since time if no explicit
87 since time was supplied on the command line.
88 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
89 that updates the state file at job termination time in addition to
90 when the daemon terminates.
92 kes First version where a plugin did a backup.
93 bpipe-fd.so created a backup file, wrote a test
94 string to it, and Bacua could restore this fabricated file.
96 kes Implement DB Driver = string for the DBI driver.
97 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
98 kes First cut of code for loading Win32 plugin dlls. Implement
99 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
100 and implement a dlfcn.h file based on opengroup's definitions of
103 kes First cut plugin directives.
105 kes Apply patch from bug #1049 to prevent stripping the path on a
107 kes Attempt to fix bug #1047 where stripping a path corrupts the
108 heap. Waiting for feedback.
109 kes Correct the Mount message not to suggest labeling a new tape
110 when doing a restore. Submitted by email by John Stoffel.
111 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
112 FD by using casting. Reported in bug #1042.
114 kes A bit of crypto cleanup. More later.
116 Release Version 2.2.8
118 kes Apply patch from Martin to correct bug #1040, bscan sets existing
120 kes Fixed important spelling error in doc -- bug #1045.
122 ebl Fix bextract to be able to extract non-portable Win32 data to
124 kes Move initialization of read/write res lock earlier in the code.
125 This fixes the crash with a null conf file. This fixes bug
127 kes Redefine CURES in lib/parse_conf to be URES and move it all
128 into lib/parse_conf.c -- this responds to bug #1042, but does
129 not fix it. The fix is not to compile with FORTIFY_SOURCE.
130 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
131 the trunk SVN. I don't think this was reported as a bug.
133 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
135 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
137 kes Add DataDespooling and DataCommitting status (committing is
138 the last despooling).
139 kes Finish implementation of new reservations code noted below.
141 kes Fix bsnprintf for float point numbers. I broke recently when
142 parameterizing some variables. This fixes bug #1036.
143 kes Undo recent reservations changes ... will apply them later
144 when they work better.
146 ebl Fixes #1034 which cause mysql to hang the connection after 8h
147 ebl Change default statistics target of filename.name and path.path
148 fields for PostgreSQL. This speeds lookup by indexes. Thanks
150 kes A few more tweaks to new reservation code. Make sure to clear
151 vol released flag when retaking volume. When reading label and
152 label is bad mark volume unused. When recycling, mark volume
153 unused so it can be renamed.
155 kes Fix reserve_volume() so it doesn't release a volume in use
156 (i.e. a volume entry not marked released). This should be
157 the last part needed to fix bug #1018.
159 kes Move Heartbeat documentation from Job to Director resource.
160 This fixes bug #1033.
162 kes Fix existing switch drive SD code to call autochanger to release
163 any old volume. This must be done to keep the autochanger from
164 releasing subsequently newly reserved volumes in doing a close().
165 This should fix bug #1018.
166 kes Fail if attempting to get console input in batch mode. This
167 should help fail RunScript console commands that are incomplete.
168 kes First cut implementing switch_drive() in SD (not actually called).
170 kes Implement first cut running console commands in a RunScript.
172 ebl Fixes bug #1028 where 'Selection Type' option was not usable
174 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
177 Release Version 2.2.7
179 kes Add new free_tls() entry point so that Win32 builds.
180 kes Fix compile warning in src/lib/util.c
181 kes Fix entry point for edit_job_codes() so that Win32 builds.
182 kes Fix seg fault Frank Sweetser reports in regression testing
183 on his systems. The problem was that the original author of
184 bsnprintf.c did not take into account the side effects of
185 using ++x in the argument to a #define.
186 kes Make SD protocol backward compatible with version 2.2.x.
188 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
189 because Bacula no longer restores sockets.
190 ebl Always use ignorecase fileset option on win32 FD.
192 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
193 that implements double quoting include names in conf files,
194 and also allows piping input by having the first character
195 be a vertical bar (|).
196 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
197 that implement %f in RunScripts to pass the FileSet name.
198 kes Skip leading | when lex input comes from a pipe as suggested
199 by Michael Stapelberg <michael@stapelberg.de>.
201 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
202 Nerijus Baliunas <nerijus@users.sourceforge.net>
204 kes Implement Plugin Directory and plugin events.
206 kes Implement a security enhancement: TLS authentication but no
207 encryption. Enabled by setting 'TLS Authentication = yes'.
208 Note when this is on, TLS encryption is turned OFF!
210 kes This patch corrects a problem where the maximum concurrent storage
211 jobs counter gets out of sync during restore jobs causing jobs to
212 'wait on max Storage jobs'. This patch fixes bug #1009.
214 kes This patch fixes bcopy so that it produces correct Volumes.
216 kes This patch eliminates spurious output to the console during a VerifyVolume
217 job that contains encrypted data. It fixes bug #1024.
219 kes This patch prevents the 'status dir' command from trying to use a scratch
220 volume and possibly moving it from one pool to another. This patch fixes
223 kes Add new include to postgresql.c suggested by Marc Cousins so
224 that it compiles correctly with pgre version 8.3.
226 kes Fix --archivedir addition to configure. Replace it with
227 --with-archivedir in configure.in This fixes the regression
229 kes This patch fixes bug #1012 where the job is canceled because
230 of Max Run Time exceeded when the job has not yet started.
232 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
233 one 'part' to write. Instead of each part being stored on disk,
234 written to DVD, then deleted from disk, all parts are written to disk,
235 and only the last is written and deleted from disk.
236 kes This patch fixes the status command to include the formating string for
237 JS_AttrInsterting. It fixes bug #1021.
238 kes This patch should fix the Mac OS X build problem on the latest
239 Darwin, where sys/types.h was not included correctly (apparently
240 due to a change in the Mac headers). The solution was to explicitly
241 ensure that it is defined for the ./configure.
242 This patch also has a rebuild of configure that includes the Debian
243 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
244 kes This patch should ensure that queued messages to the console are
245 displayed as soon as possible. It should fix bug 1007, but has been
246 reported not to work.
248 kes This patch fixes the infinite loop when trying to increase the
249 maximum number of volumes in a Pool during the add command.
250 This patch fixes bug #1008.
252 Release Version 2.2.6
254 db Remove extra data on estimate command in joblist for bat.
256 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
257 really change anything, but is the beginning of doing it *right*.
258 To do it completely right the LastWritten date must be passed to
259 the SD, but it is not yet done.
260 kes Minor tweaks to some bat restore SQL.
261 kes This patch fixes bug #1003 where putting the message output from
262 a Verify job into the catalog results in a recursive loop. The problem
263 seems to show up only with postgresql (to be verified).
264 kes Correct %x to %p in postgresql debug statement.
266 kes Fix bug #942 where lots of emails where generated when the heartbeat
267 interval was low and Bacula wanted a different tape from the one in
270 ebl Add new SD despooling attributes and Dir inserting attributes
271 job status codes in the catalog (Status table).
273 ebl Use qmake-qt4 instead of qmake when available (debian system).
275 kes Add a security warning to src/cats/make_catalog_backup.in indicating
276 that passing the password via the command line (arg 3) is insecure.
277 This responds to bug #990 (it doesn't fix it).
279 kes Set default debug_level to zero. This corrects bugs #991 and #993.
280 kes Fix a crash in bat when it cannot connect to the Director for example
281 if the Director is not running.
282 kes Remove redundant INDEX (JobId) from File table in the trunk.
284 kes Make explicit exception to GPL in LICENSE to permit linking
285 the Win32 FD with Microsoft VSS code.
286 kes Apply the Solaris package patch from
287 Masopust, Christian <christian.masopust@siemens.com>
288 kes Apply the patch to optionally add a timestamp in the debug output
289 submitted by Mariusz Czulada <manieq@wp.eu>.
291 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
292 backend (sql_strerror). Fixes bug #989
294 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
295 It applied with no problems.
296 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
298 kes Redirect stderror to stdin on mt status command in mtx-changer.in
299 since the status is returned on stderr on Solaris.
300 kes Activate Close button on tray-monitor window. This fixes
302 kes Check for NULL item in parse_conf.c before calling it. In the
303 case of Device, there is no item and this caused a seg fault when
304 Device appears in the conf file.
305 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
306 avoids pulling in config.h multiple times in some new code.
308 kes Fix spurious warning message printed when creating a volume with
309 a LabelFormat. This fixes bug #976.
311 Release Version 2.2.5
313 kes Add JobId in place of Job name in all the Jmsg() output.
314 kes Correct the APP_DESC for the Win32 storage service (remove an e).
316 kes Make maxvol-test and new more strict maxvol2-test work.
317 kes Print JobId in all Jmsg() job output.
319 kes Add new SD despooling attributes and Dir inserting attributes
320 job status codes. This fixes bug 961.
321 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
323 kes Fix doc issue. This fixes bug #963.
324 kes Fix listing performance problems in bat. Pointed out by
326 kes Remove old debug code.
327 kes Fix bat code that tests for Win32. This should fix bug #968
328 kes Query 5 list wrong Vol after migration. This fixes bug #960
330 ebl Fix #969 where user can't change Replace option in restore menu.
332 kes Save jcr in thread specific data (tsd) for each thread.
333 kes Make Dmsg() print JobId as -%u.
334 kes Make Jmsg, Emsg, and others automatically pickup the jobid
335 for the thread if it exists.
336 kes Remove old reservation debug jid code.
337 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
338 ebl Add an option that permit to specify spool size in job
339 definition. (Applying patches/testing/spoolsize_per_job.patch).
340 You must upgrade SD and DIR at the same time.
341 dvl Add new configuration item --archivedir
342 dvl Adjust regression tests to use tmp not /tmp. This will allow
343 multiple concurrent runs of the regression tests.
345 kes Fix race condition that drops final block written to volume.
346 This happens in rare cases with multiple simultaneous jobs
347 when the Volume fills. This fixes bug #964. May be related
348 to bug #935 and possibly #903.
349 kes Eliminate more strerror() and replace with bstrerror().
350 kes Remove BSD getopt and replace with unrestricted IBM version.
351 kes Fix Win32 build for changed calling sequences.
352 kes More tweaks to the mount volume routines to get everything
353 right. Changed variable name from find to have_vol, which is
354 much easier to understand.
355 kes Enhance btimer debug code.
357 kes Fix FD->SD authorization failure, which was due to spurious
358 wakeups from a pthread_cond_timedwait(). Simply check the
359 predicate before continuing. This fixes bug #953.
360 kes Add const char where needed (more to do). Remove temp debug code.
362 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
363 kes Don't overwrite error message in check_tables_version.
365 kes Unlock batch insert tables with same calls used elsewhere.
366 kes Allow starting 59 jobs a second.
367 kes Make SD session key more random.
368 kes Add retry for SQLite opening db if it fails. Probably helps
370 kes Suppress extra error messages during batch insert failure.
372 kes Add jcr to timer packets so if killed message can be sent to job.
373 kes Add JobId to all Dmsg() output.
374 kes Put some FD auth code on dbglvl rather than fixed.
375 kes Return insert attributes error message in db msg buffer to avoid
376 false error messages. Helps fix bug #966.
377 kes Separate batch init error messages. Probably helps fix bug #966.
378 kes Make SD code that contructs attribute insert check string lengths
380 kes If Dir gets an error during inserting attributes, cancel SD.
381 This reduces unnecessary error messages.
383 kes Correct search boolean for getting Volume info
384 ebl Cleanup batch insert code. Probably fixes bug #965.
385 kes Back out one small change to the reservation system (reserving a volume).
386 kes Rework how a Volume is mounted. It is now much more intelligent and
387 will always attempt to use any mounted volume if possible and reduces
388 calls to the Director asking about volumes.
390 kes Turn off some code when batch insert not enabled.
391 kes Edit FD name in connect error messages.
392 kes Rework the reservation system to take into account that the Director
393 might give us a Volume that is different from the current one being
394 used, and to ensure that we don't exceed Maximum Volume Jobs.
395 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
396 fatal error with multiple jobs running'
397 kes Add more debug code in reservation system.
398 kes Implement maxvol-test to check bug #947.
400 kes Add code to handle tray monitor separated from Win32 FD.
401 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
403 kes Add missed return in fixing verify bug -- trunk only.
404 ebl Fix a command parser issue causing a director segfault.
405 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
407 kes Increase the max block size to 4MB fixes bug #957.
408 kes ERABT if user sets min block size > max block size. Fixes bug #956.
409 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
410 is not properly mounted (recognized) during a poll.
411 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
412 Job that has differences reports Verify OK.
413 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
415 ebl Add an option to operate on all pools with update vol parameters.
416 This complete the project 20. Patch from Nigel Stepp.
417 ebl Add history support to bconsole when using readline.
418 Using Ctrl-D to exit doesn't update .bconsole_history
419 kes Modify new volume algorithm to use max MediaId for generating next
420 volume number rather than the count of Volumes. This should essentially
421 eliminate the failure rate if some volumes were deleted. Bug #921.
422 kes Begin implemention of Optimize Job Scheduling.
423 kes Implement restore callback that Dirk and I agreed on for bat
424 restore. This fixes bug #928. Restore of backup of zero files fails.
425 kes Fix SQL Catalog logging which broke with new db_escape_string
428 Release Version 2.2.4
430 kes Fix bacula_cats.def for new db_escape_string().
431 kes Increase size of name string when FD making connection to SD.
432 May fix bug #953. FD->SD connection failure.
434 kes Add code to help Dan debug 2drive-incremental-2disk test.
435 kes Add code to try to fix bug #908.
436 kes Add waits to multiple exit detection code to try to force pid
437 file to always be deleted.
438 kes Restore good dev.tar.gz to rescue set appropriate binary property.
440 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
441 trying to switch drives by checking for blocking before unblocking.
443 kes Cancel storage daemon in all cases where FD reports error. This
444 should fix virtually all cases of bug #920.
445 kes Fix db_escape_string() for MySQL which did not compile.
447 kes Fix error message that was clobbered when Dir tells SD it does not
448 have write permission on Volume. This should fix a minor point
449 in bug #942, but not the main problem.
450 kes Add code to cancel job in SD if FD connection fails. This should
452 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
453 dvl Pass jcr and db into db_escape_string() to enable better escaping
455 kes Fix migration code to get correct Volume name with multiple volumes
456 by skipping |. Fixes bug #936.
457 kes Implement patch supplied by Landon to fix bug #944 where using
458 TLS with bconsole uses 99+% of the CPU.
459 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
461 kes Move patches into patches directory.
463 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
466 ebl Using 'm' in bconsole will show messages like before,
467 and not memory usage.
468 kes Fix bug #935, and probably also bug #903 where files were not
469 restored. MediaId was not properly set in JobMedia record after
472 kes Suppress chown and chmod error messages if the FD is not running
475 kes Apply Martin Simmons' patch that should turn off the new API usage
476 when batch insert is turned off allowing building on older
478 kes Add ./configure search in qwt-qt4 for qwt package
480 kes Bacula is now free of 3rd party GPL copyrighted code!
482 kes Add guid_to_name.c/h which replace idcache.
483 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
485 ebl Detect if new PosgreSQL batch insert API is present.
486 kes Correct incorrect mempool call causing Director crash. Occurs on
487 systems without va_copy().
488 sb Update spec files for 2.2.1 release
490 kes Fix memory pool call in ua_output.c. bug #934.
491 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
492 Add test program to fnmatch.c
494 kes Integrate patch to README.vc8 from
495 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
496 edit it to get it into Unix patch format.
497 kes Implement mkpath.c to replace old FSF makepath.c
499 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
501 Release Version 2.2.1
503 kes Update POTFILES.in
504 kes Cleanup a few underquoted AC_DEFUNs in configure
505 kes Apply patch from Martin Simmons that adds a test for va_copy to
508 kes Fix bug #921 by increasing the number of tries to create a new volume
510 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
511 can be called multiple times. Implement a version for machines
512 without va_copy() that gets a big buffer.
514 kes Integrate more portable zone offset code into bsmtp.c
515 Submitted by Attila Fülöp.
517 kes Fix bad SD->FD return status reported by
518 (James Harper) <james.harper@bendigoit.com.au>
519 ebl Fix a bug in read_close_session which return random status
520 thanks to James Harper
522 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
523 and directory names during restore of single file/directories.
524 kes Add sanity checks to .sql command when string is empty. Hopefully
525 that will resolve Dirks Director crash.
527 kes Apply patch submitted by Martin Simmons that corrects a seg fault
528 in the bsmtp chat subroutine when debug is >= 10.
530 kes Fix Director crash when running bat SQL queries.
531 kes Add David's notes on Item 8: Copy pools.
533 kes Rework projects file to be current and ready for a vote.
534 kes Enhance lex scanner error message.
536 kes Tweak LICENSE file to mention BSD code.
537 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
538 if specified on the ./configure.
539 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
540 This class is intended to allow us to open a second bsock to the
541 Director while in the restore subdialog.
543 kes Fix configure to create bat Makefile before creating dependencies.
544 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
545 kes Add a tooltip to the tray monitor.
546 dvl Set the Director's PID file before dropping privs. This fixes
549 kes Update AUTHORs file
550 kes Increase the default max concurrent jobs to 20 in FD and SD to
551 correspond with the default .conf files.
552 kes Rewrite the Win32 service routines. This eliminates the 3 copies
553 some different, of the same file created by RN when porting the
555 kes Rearrange some of the Win32 directories and the placement of the files
557 kes Set DEVELOPER flag in version.h
559 ========================================================================
560 Release Version 2.2.0
562 kes Apply a second doc patch from Marc.
563 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
564 improves the tips section that discusses how to setup multiple
567 kes Update bat README file.
568 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
569 corrects a typo in the Recycle status check in db_find_next_volume().
570 This will probably fix a number of annoying problems with multiple
572 kes Modify most of dird/msgchan.c to use bsock class calls rather than
573 bnet calls -- no functionality change.
575 kes Modify the Verify output to specify if files are missing on
576 the Volume(s) or disk. Fixes confusion in bug #916.
577 kes When more than one Volume is read in a migration job, the last
578 Volume bytes reported are from the last read volume rather than
579 the last written volume. Fixed. This fixes bug #910.
580 kes Fix display of Recycle flag after update volume=foo recycle=yes.
581 It previously printed New Recyle flag is: no. This fixes bug
584 kes Correct seg fault when switching tape drives during restore.
585 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
586 be used until after 2.2.0 release.
588 kes Remove fnmatch() in SD that permitted wild card specifications.
591 kes Fix %g in filename returned by SQL for browse tree reported by
593 kes Fix configure so that it puts config.out in the cwd rather than
595 kes Attempt to fix the locking problem reported by Eric in bug #906.
596 kes Make berrno class to leave errno unchanged after constructor call.
597 kes Make bnet_server use the heap rather than the stack to allocate
598 its socket fd pointers to avoid a crash at termination. Problem
599 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
601 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
602 and putting it in depkgs-qt along with Qt4.3.
604 kes Rework code in acquire.c that switches drives for reading when
605 the Media Type does not match. This should fix bug #906
607 ebl Fix a director segfault during job setup #907
608 kes Correct seg fault in postgresql when first operation returns no
609 rows. Fixes Dirks File browser problem seg fault with bat.
611 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
612 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
615 kes Implement PopUp YES/NO dialog for bat.
617 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
619 kes Correct RunScript to terminate job in FD on failure.
620 kes Change abort_on_error and AbortJobOnError to fail_on_error
621 and FailJobOnError in RunScripts.
622 kes Minor tweaks of code formating in RunScripts, principally to
623 avoid depassing 80 columns.
625 kes Eliminate one #ifdef Win32 in bsmtp
626 kes Implement grow tool to grow a file for testing very large databases.
627 kes Add big-vol-test to test Bacula seeking with > 5GB.
630 kes Modify find_next_volume() to return all values in Media record.
631 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
635 kes Update Release notes
637 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
638 Warning, in previous beta version, all media get from scratch keep their
641 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
642 This should fix bug #842. Made a note to look at removing the temp
643 files at the end of the install.
644 kes Add ability to mount and unmount a file device providing it is
645 marked as being removable and has the appropriate mount and unmount
646 commands defined in the Device resource. This fixes bug #830.
647 kes When applying a storage override, release all previous storage
648 definitions rather than just prepending the new storage.
649 This should prevent a good deal of confusion.
651 kes Implement ./configure search for qwt libraries.
653 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
654 Win32 FD. This should fix bug #893.
655 kes Remove an unnecessary beep in Win32 init code.
656 kes Update copyright dates in Win32 executable about boxes.
657 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
658 code with a BSD getopt.c and getopt.h.
659 kes Remove sched.h from the Win32 compat directory -- not used.
660 kes Remove the Exit menu item from the Win32 tray monitor. If you really
661 need to shut it down, do it through the services panel or the command
663 kes Remove some inappropriate Bacula FSFE copyrights.
664 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
665 kes Fix regress config non-portable test as pointed out by
666 Florian Heigl <florian.heigl@gmail.com>
667 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
668 as pointed out by Florian Heigl <florian.heigl@gmail.com>
670 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
671 Reported by Frank Sweetser.
675 kes Fix client-only build.
676 kes Integrate client-only fixes for bsys (initgroups) and conio from
677 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
678 kes Make arguments to get_scratch_volume() in same order as other
680 kes Rework the prune_volumes() subroutine so that after purging and
681 no volume found in desired pool, it will check for a scratch
682 volume. This prevents recycling the whole scratch pool.
683 kes Add code to status storage to print boffset_t (largefile support).
685 kes Move qwt (Graphics libarary for Qt4) to depkgs.
686 kes You now need a --with-qwt=<dir> to be able to build bat.
687 kes Update src/win32/cats/bacula_cats.def to include the new
688 db_get_query_dbids() call on Win32.
690 kes Correct a problem when selecting a scratch volume and moving
691 it to another pool that lost some columns.
692 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
693 kes Enhance Autochanger error messages to include Volume and device name.
694 kes Rework prune_volumes() code to take account of InChanger flag,
695 and to handle recycling volumes going to the Scratch pool and
696 current pool because the RecyclePool directive.
697 kes Implement a better and more efficient db_get_query_dbids() to
698 handle creating and passing back a list of DBIds.
702 kes Start work on new more efficient DBId subroutine. First use
703 will be for recycling volume to Scratch inchanger.
704 kes Increase number of JobIds in pruning from 1000 to 10000.
705 This to be replaced by above routine.
706 kes Begin implementation of building Qt4 on Win32.
707 kes Correct typo in fix I added for bad TLS shutdown.
708 kes Pull 2.0.3 patches into patches directory.
709 kes Update Release notes. Include qt-console in line count.
710 kes Update Projects file.
712 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
713 bug in migration code where a job that spanned two volumes
716 kes Implement new BST_DESPOOLING blocked state. Change from locking
717 during despooling in SD to blocking. This means that other threads
718 can work with the device structure, in particular the reservations
719 system while despooling.
721 kes Fix return in reservation message queue that missed clearing
722 the jcr lock (implemented 26Jun07 below).
723 kes Rename a number of dev methods to make locking function names
725 kes Document locking in lock.c. Move lock structures to new file
728 kes Move reservations message lock to lock jcr only this
730 kes Move main SD locking code into lock.c (new file).
731 kes Update Win32 build to include lock.c
735 kes Dirk committed the qwt library code for drawing graphs in bat.
736 kes Tweak install of qwt so that it is integrated with ./configure.
738 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
739 out by Eric (my typo).
740 ebl Fix configure.in to get batch mode enable
741 kes Return correct string from authenticate.cpp in bat when connecting
743 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
744 spurious line drops when using TLS.
745 kes Do not file reparse points when restoring a file that already
748 kes Implement Windows reparse points -- similar to directories, but
749 we do not descend into it. This is a first cut. They seem to
750 be backed up, but restore is not yet tested.
751 kes Remove restore_blocking in tls code when shutting a socket to leave
752 it in blocking mode. Hopefully this will fix the encryption bug
753 reported by Frank Sweetser.
754 kes When opening a file for backup, tell the OS that we are going to
755 read it sequentially -- optimization.
756 kes Change variable names in authenticate_director() to not conflict
757 with member names in bat. Caused great confusion with compiler,
760 kes Queue openssl error messages in case of comm problem.
761 kes Do shutdown() call if socket terminated.
762 kes Remove some duplicated code in tls.c
763 kes Move more of the bsock member variables into private and access
765 kes Add Frank Sweetser's tls-test to the regression suite.
767 kes Add Swedish sv.po file
769 kes Don't print clock skew message in FD if less than 3 seconds diff.
770 kes Add a bit of VSS info to status client.
771 kes Implement a first cut of Vista VSS, using Win2003 code.
775 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
776 loaded tape but uses first drive).
777 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
778 This was indeed a Win32 issue.
780 kes Simplify search of autochanger for in-use Volume.
781 kes Fix exit condition of check for in-use volume. kes Remove
782 inappropriate my_postgresql_free_result() in db_close()
784 kes Fix bad return in FD when encryption signature not found.
785 Probably caused a crash.
786 kes Inhibit missing encryption signature error messages for
787 file types where no signature computed.
788 kes Correct inverted check on autochanger in reservation system.
789 kes Tweak debug code in autochanger reservation.
791 kes Add some additional locking in the cats directory in subroutines
792 that modify packet variables called from batch insert.
793 kes Rework how dcrs are allocated. new_dcr() can now be called
794 with an existing pointer, and it will simply clean it up.
795 This allows the reservation system to test various different
796 devices, and will permit easy device changes.
797 kes A bunch of changes all over to handle new new_dcr() calling
799 kes Work more on the Volume management in the SD. Remember Volumes
800 for tape drives and for autochangers (even virtual disk changers).
801 kes When looking at the Volume list to reserve a drive, handle
802 autochanger names correctly by interating through the changer
803 devices. Also call the Director to see if a Volume is suitable
805 kes Fix some bugs in bscan. Make sure all media records are written.
806 Make sure that valid JobMedia records are written for disk files.
807 Previously they were completely wrong.
808 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
809 that the URLs don't change and so that the developers will all
810 work off the same copy. Rebuild from scrach.
811 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
815 kes Fix seg fault in FD from incorrect digest size.
816 kes Fix argument to non-OpenSSL crypto.c subroutine.
820 kes Remove a few malloc()s from the encryption code.
821 kes Use the class calls to bsock in filed/backup.c and restore.c in
822 place of the old bnet_xxx code.
823 kes Implement code that does an on the fly calculation of the
824 signing digest during restore of encrypted files. It makes
825 a best guess at the algorithm, and if it is not correct, will
826 then revert to the old code which reads the file after it is
828 kes Implement at least one missing crypto stream in stream_to_ascii()
829 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
830 #877 where a reload with bad syntax causes Dir to exit.
832 Cut: 2.1.14 beta (not released)
834 kes Do not free a volume on a tape drive until another volume is
835 mounted and read, or the autochanger unloads the volume.
836 This should help the SD re-use volumes that are already mounted,
837 and should fix bug #886.
838 kes Apply patch from user brettedgar that allows gnome2-console include
839 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
840 kes Apply patch from Lucien Weller that fixes day of week calculation
841 because of DST flag problem. Fixes bug #887.
843 kes Move find_next_appendable_volume() to after acquiring a valid device
844 in reserve.c. This fixes bug #864 -- confirmed by reporter.
846 kes Unable to reproduce bug 872. However added additional testing for
848 kes Bug #874 resolved by documenting SQLite limitations.
849 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
850 kes Bug #881 resolved by removing typo in mtx-changer script.
851 kes Made Frank Sweetser's wiki the official Bacula wiki with his
852 approval. Added a link to the wiki on the web page, and implemented
853 a backup from http://paramount.ind.wpi.edu
855 kes Fix update allfrompool to pass pool name.
857 kes Convert to pure GPL v2 license.
858 kes Fix sscanf problems reported by Peter Buschman that caused
859 a bus error on Solaris.
860 kes Rework (simplify) the select prompt in bat.
861 kes Move get_jobid_from_tid() into lib and create a
863 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
864 should definitely fix the problem of lost error messages in the
866 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
867 kes Eliminate tcpd.h from the project. Enclose the #include from the
868 library with extern C ...
869 kes Add print of signal name when a signal is trapped.
873 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
875 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
876 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
877 makes SQLit3 run 30 times faster, though a bit less safe.
878 kes Implement --with-batch-insert in configure and detection of thread
879 safe libraries. It is on by default, but turned off if no thread
880 safe library (e.g. SQLite 2) is available.
882 kes Fix Bacula PostgreSQL buffer overruns.
883 kes Do better checking for NULL results returned from PostgreSQL;
884 implement retry for failed queries; clear results buffer after
885 failed query. Hopefully this will correct the PostgreSQL failures.
887 kes Implement algorithm to handle only one appendable volume with
888 Prefer Mounted Volumes = no.
889 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
890 returned from a query.
891 kes Make volume lock recursive.
892 kes Implement an additional volume reservation algorithm that
893 starts by considering all reserved volumes then uses the
894 old brute force algorithm of searching the resources to
895 find a suitable device.
896 kes Add new reservations debug code and refine the old code.
897 kes Update the win32/dll/bacula.defs file.
899 kes Tweak reservations algorithm to permit a few more cases, i.e.
900 volume reserved, but on different drive, ...
901 kes Enhance SD status to include Pool and Media Type for drive in a
902 more readable format (a bit longer).
903 kes Fix PostgreSQL double free.
905 kes Minor refactoring of restore decryption code.
906 kes Add code to smartall.c to detect double free of a buffer.
908 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
909 so that bsmtp will create a correct email address (mailbox only).
910 kes Modify 'memory' command so that the buffers are listed as 'In use'
911 to avoid confusion with Orphaned buffers.
912 kes I reworked the OpenSSL include/lib flags to be handled in
913 the standard Bacula way, which should fix bug #863 concerning
914 non-standard OpenSSL libraries.
916 kes Implement Help Browser window for bat.
917 kes Fix reload bug that reset StorageId to zero.
919 kes Fix TLS #ifdefing when TLS turned off.
920 kes Ensure that when labelling a tape with Slot=0 that InChanger
922 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
924 kes Add StartTime to final uar_sel_jobid_temp query so that we can
925 add DISTINCT (required by PostgreSQL).
926 kes Implement BSOCK authenticate_director() method. Eventually will
927 authenicate all daemons.
928 kes Move several more functions into the BSOCK class.
930 kes Add code to tell the OS that we no longer need a cached
931 file that we were reading. In findlib/bfile.c. Also,
932 only cache files that we are reading. Thanks to
933 Tobias Oetiker <tobi@oetiker.ch> for the idea.
934 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
935 kes Implement script to automatically generate cats and dll .def
937 kes Update README.mingw32 to include new .def file generation.
938 kes Correct typo in UTF-8 error message as reported by:
939 jhernandez <julianhernandez@gmail.com>
940 kes Add additional sm_check() code on debug level 1.
941 kes Set default debug level to 1.
942 kes Trap SIGABRT in attempt to get traceback.
944 kes Reduce bat connect timeout from 30 to 15 seconds.
945 kes More restructuring and implementing BSOCK class in place of
947 kes Remove a few unnecessary malloc() tests in crypto code.
948 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
949 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
950 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
952 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
954 kes Fix Verify InitCatalog. The attributes were not pointing to the
955 correct saved location.
956 kes Implement message callback so that GUI is sure to get all
957 daemon messages. Currently displayed in a dialog in bat.
958 kes Ignore SIGUSR2 (Bacula timer) in bat.
959 kes Apply regress patch from bug #859 to allow regress to work
960 with Solaris compiler.
962 kes Begin adding TLS support to bat.
963 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
964 clean up lex.c and make it more readable.
966 kes Move more bnet functions into the BSOCK class.
967 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
968 kes Complete change of berrno strerror() method to bstrerror()
972 kes Cleanup incorrect email addresses in bsmtp.
973 kes Make bat display initial messages rather than discard them.
975 kes First cut of adding .mod to the run command.
976 kes Implement auto display of messages in bat.
977 kes Enhanced preferences to allow all Bacula output to be
980 kes Try to make bsmtp date routines more generic.
981 kes Fixed bug #856 autochanger documentation.
982 kes Rework bsmtp date editing for Win32. This fixes bug #854.
983 kes Add new cats entry point so Win32 builds.
985 kes Attempt to fix bsmtp date editing on OSes without %z editing.
987 kes Do better checking for the MySQL 64 bit libraries looking for both
988 .a and .so libraries.
989 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
990 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
991 kes Require the thread safe version of MySQL during configure. Thanks
992 to Andre Noll for pointing this out.
993 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
994 continuing in migration code.
995 kes Apply implementation of tray-monitor font derived from gnome-console
996 submitted by Andreas Piesk <a.piesk@gmx.net>
998 kes Eliminate important memory loss in SQLite
999 kes Fixed the batch insert MySQL thread specific data that was not
1000 being freed. See cats/mysql.c:db_thread_cleanup().
1001 kes Fix restore before command.
1002 kes Convert old hdr.name to name() in a few places.
1003 kes Implement update jobid command.
1004 kes Return all time_t dates in db_get_job_record()
1005 kes Stop watchdog in SD earlier.
1006 kes Put Pool just after Storage in please mount message.
1007 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1010 kes Update the po files.
1011 kes Fix Verify InitCatalog by making it cache attributes.
1013 kes Change name bacula-bat to bat for man 1 page to correspond to
1015 kes Check for client and store NULL pointers in status command. This
1017 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1018 kes Fix sign extended editing of %p.
1019 kes Clean out a little old #ifdefing in cats/mysql.c
1021 kes If time diff between DIR and FD is more than 600 seconds convert
1022 INFO message to WARNING.
1023 kes Implement heap size display in status for all daemons.
1024 kes Attempt to fix MySQL db open memory loss (not successfull).
1025 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1026 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1027 Query. This looks like a MySQL but but by doing extra releases,
1028 the memory goes away. This should fix bug #847.
1030 kes When backup fails, cancel SD before waiting for sd termination.
1031 kes If SD is waiting for FD to connect during cancel, wake up the
1033 kes Fix fsf code so that errno is correctly reported.
1034 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1036 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1037 so that Bacula doesn't later stumble into a seg fault.
1038 kes Use the term Restore Client in the restore Job report.
1039 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1040 the original job's FileSetId.
1041 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1042 spooling in migration jobs. Not yet tested.
1043 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1044 reading conf file from a pipe. However, do it with open_bpipe()
1045 rather than popen. Not yet tested.
1047 kes Fix an ugly bug where the VolCatBytes were getting updated
1049 kes Implement bconsole memory command that prints current memory
1050 usage, plus smartalloc dump.
1051 kes Clarify some error messages in backup, admin, and migrate.
1052 kes Shrink label dialog to smaller size.
1053 kes Invert Cancel OK buttons on restore to be OK Cancel.
1054 kes More strerror() to bstrerror() conversions.
1056 kes Start implementing bstrerror() in place of strerror().
1057 kes Stripping path -- seems to work.
1059 kes Prevent door and port files from being restored (mostly
1061 kes Free an unreleased buffer in compat code.
1062 kes Change console Job name from *Console* to -Console- to eliminate
1063 Win32 filename problems. Put Win32 path separator when creating
1064 Console file. This fixes bug #846.
1065 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1067 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1069 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1070 to force Win32 error message.
1072 kes First cut strip path. The data should be passed to the FD,
1073 but nothing is done with it yet.
1074 kes Enhance the digest and signature routines in the crypto
1075 library to accept a JCR and to use it to print error messages
1076 so that they will go in the Job report rather than the daemon's
1078 kes Simplify some of the verify signature code.
1079 kes Simplify a few of the alternative returns in the signature
1082 ebl Use only POSIX regex instead of GNU regex in breg.c for
1083 File relocation. It fix broken freebsd compilation.
1084 kes Convert all other Dir files to use new ua class message
1086 kes Tentative fix for missing digest signature in bug 807.
1087 kes Correct handle problem in new win32_ftruncate routine.
1088 kes Convert ua_purge.c and ua_update.c to use new ua class
1089 message routines for bat.
1091 kes Correct incorrect installation of LICENSE in Win32 installer.
1092 kes Display LICENSE at the beginning of the Win32 install.
1093 kes Attempt to correct the need for the png files to be installed
1095 kes Reapply my bat.conf install script in qt-console. I think I
1096 editted bat.pro instead of bat.pro.in and it was lost.
1097 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1098 the /var/lock/subsys for subsysdir. Also corrects typos in the
1101 kes First cut update job.
1102 kes Correct configure to include qmake of src/qt-console directory.
1104 kes Make restore job yes/mod/no print in one command so GUI works.
1105 kes First cut implementing backup and restore client.
1106 kes Correct editing in Verify output that caused a seg fault.
1108 kes Insure that bat.conf is not overwritten during installation.
1109 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1110 while I was implementing migration in March 2006 !
1112 ebl Cleanup file relocation, using char *RegexWhere instead of
1113 char *where + bool where_use_regexp
1114 kes Update some manpages and add bat manpage.
1115 kes Make a first cut at converting bacula.spec.in for bwx-console
1117 kes Apply patch from John Goerzen to add hostname as fourth argument
1118 to make_catalog_backup script.
1119 kes Fix typos I introduced into bsmtp.c
1120 kes Make pm_strxxx() routines handle input of NULL pointer. This
1121 is to protect from NULL pointers returned from SQL databases.
1122 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1123 kes Add more debug to FIFO code -- fix fifo regression test.
1125 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1126 kes Add thread timer to bnet_connect() to break from OS if wait time
1129 kes Update Win32 build to include new files, new symbols, and
1131 kes Implement socket level heartbeat (tcp_keepidle)
1132 ebl Commit File relocation patch
1133 kes Make bat have 'make install' target.
1134 kes Warn during install if old gnome-console binary found.
1135 kes Warn during install if old wx-console binary found.
1136 kes Add -8 option to bsmtp command line to add content type utf-8.
1137 Fixes bug #809. (Character coding problem in bsmtp).
1138 kes If < is found in target (from, to, cc) then do not enclose the
1139 target in < > in bsmtp. Fixes bug #772 (malformed address).
1140 kes When printing certain items in dbcheck, stop after 300000.
1141 Fixes bug #822. (dbcheck loops).
1142 kes Incorrect status in Dir after waiting for mount with poll set.
1145 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1147 kes Print waiting to reserve a device every 5 mins.
1149 kes Don't call close_part in label.c if tape and relabel.
1150 kes Don't free volume if busy in close() -- should help with
1152 ebl Fix #824 RunScript bug (After script could be execute twice)
1153 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1154 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1155 Add a regression script to test RunScript
1157 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1160 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1161 deprecated. No additional bugs will be fixed, and they will be dropped
1162 in a future release (probably 2.4.0).
1163 kes Change name of wx-console to bwx-console to make it more Bacula
1165 kes Change the name of gnome-console to bgnome-console to make it
1168 kes Some time in March, a Feature Request with patch from Jorj Bauer
1169 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1171 The ability for the director to validate a Client (FD) CN against
1172 an arbitrary set of patterns rather than the hostname, with
1173 A new 'TLS Allowed CN' set of directives which are implemented
1174 in the Client resource. Then pattern matching is used in place
1175 of hostname matching against the Certificate's CN. As an example, we
1176 have certificates which (a) use a local CA, and (b) have a CN of the
1178 kes Add new/changed entry points to Win32 build
1179 kes Create unaccepted-projects for projects that are not accepted.
1180 kes Simplify locking in the reservations system.
1181 kes Add more debug code in reservations.
1182 kes Make sure error condition on reserving a volume is handled correctly.
1183 kes Correct handling of volume_in_use.
1184 kes Correct handling of initializing a device.
1185 kes Move handling of broadcasting releasing a device into release_device().
1186 kes Correct attaching dcr to dev so that it is only done if device
1187 is properly initiated.
1189 kes Locking debug level tweaks in SD.
1190 kes Tweak new Volume code.
1192 kes Add exec external-command [wait-seconds] to bconsole. This
1193 executes the external-command. Note! normally external-command
1194 should be enclosed in double quotes.
1195 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1196 it should normally be off in a production system.
1198 kes Implement die command for SD so that we can force it to dump.
1199 kes Implement SD lock debug code.
1200 kes Implement new algorithm for keeping Volume list in SD. It
1201 is now owned by the device.
1203 kes Implement new code for freeing in use volumes that should
1204 resolve if not all, some of the problems of multiple drive
1205 tape conflicts described in bug 801.
1207 kes Fix gui/bacula-web/images files in svn.
1208 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1210 ebl Fix a bug in batch mode (in string escape)
1211 kes Correct migration prune SQL typo that crept in in a
1212 recent 2.1.x change.
1214 kes Move bnet_despool() into class in bsock.c
1215 kes Modify job report to include director name and Build OS.
1216 kes Move drop root privilege and check_catalog() before fork.
1217 kes Add update database scripts (version 9 to 10) to updatedb directory.
1219 ebl Check size and age of each file after its backup to see if
1220 it has changed during backup, if 'checkfilechanges' is set.
1221 The FD will do an extra check (stat(2)) after
1222 each file backup. mtime, ctime and size are compared with
1223 'before backup' information. If time or size mismatch, an
1224 error message will be generated. You must upgrade FD to use it.
1226 kes Make database name and user configurable
1227 --with-db-name=xxx --with-db-user=xxx
1228 kes Add back database type to message.c for debugging.
1230 kes Implement dir_sql() which issues an SQL query.
1231 kes Modify bat medialist to use dir_sql() and do some minor C++
1232 formatting as well as eliminating a number of pointers, simplifing
1235 kes Fix some of the mtx-changer grep commands for tape label readers.
1236 kes Convert a number of bsendmsg into the appropriate send/warning/error
1237 message class calls.
1238 kes Suppress the using database message in the .sql command.
1239 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1241 kes Add context menu for floating a window.
1242 kes Some minor cleanup and name changes in qt-console
1243 kes Add doing mt setblk 0 in Win32 mtx-changer.
1244 kes Apply Martin's bug fix to move definition of ENODATA for
1246 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1247 sqlite2 and sqlite3.
1249 kes More pruning cleanup.
1250 kes Turn on wait_for_drive by default in mtx-changer.
1251 kes Turn on Batch insert code by default as it now passes regression.
1252 kes Add ./configure --enable-bat to enable building of Bat.
1253 No install yet though.
1255 kes Implement a new .sql command for bat.
1256 kes Implement code to turn off pruning in obtaining the next volume.
1257 Pruning is turned off for the status dir command, but turned on
1258 for SD requests and for the list nextvolume command.
1260 kes Correct Qmsg() that was not updated correctly when committing a
1261 previous change (probably the recent TLS patch).
1263 kes Write new subroutine is_volume_purged() that explicitly checks
1264 if the Volume is purged, and if so marks it as such. This should
1265 resolve problems reported about needing to mount twice to recycle
1267 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1268 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1269 amount of duplicated code.
1270 kes Do volume pruning only for the Media Type desired (reduces pruning time
1271 if multiple Media Types are in the same pool).
1272 kes Implement more detailed info in the Job report for the Bacula version
1274 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1276 ebl Add bbatch tool to bench database and insert mode.
1277 Fix sql quote stuff in batch mode
1278 Fix sql stuff for mysql
1280 kes Correct problems with am/pm scheduling. Fixes bug #808.
1281 kes Implement new prunning code that prunes up to 1000 jobs at
1282 the same time. The same technique can be applied to a number
1283 of other prune/purge subroutines.
1284 kes Add an insanity check when starting a new tape job to ensure
1285 that the tape position has not been changed. If so fail the
1287 kes Fix Win32 build for dlls to add the folllowing:
1288 src/lib/bsock.c -- new file with new entry points
1289 src/lib/dlist.c -- new entry points
1290 src/cats/sql_create.c -- new entry point
1291 src/cats/sql_cmds.c -- new DATA item exported
1293 ebl batch mode cleanup bscan-test is ok now.
1294 kes Implement SD code to check length of disk volume before appending.
1296 kes Correct return status on db_batch... routines.
1297 kes Add call to db_write_batch_file_records() to migration code.
1298 ebl Fix AfterJob timing
1299 kes Move the checking of the database in initializion of the Director
1300 to after we drop privileges. This avoids the need for both root
1301 and bacula access to the DB.
1302 kes Correct a misplaced variable definition in src/filed/backup.c
1303 kes Correct how the new batch insert db_create_attributes_record()
1304 uses the arguments. Caused a seg fault in bscan.
1305 kes Implement lock() and unlock() methods in DEVICE class.
1306 Implement block() and set_block(xx) methods in DEVICE class.
1307 kes Modify bnet_connect() so that it uses time() to check for the
1308 wait time expiring (on some OSes, some system calls may not
1309 return immediately).
1310 kes Modify Verify to obtain the previous JobId when it is actually
1311 running rather than at schedule time (as it was in 1.38.x).
1312 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1314 kes When checking pid in pid file, continue running if the pid is
1315 the same as ours. This occurs on IRIX after a system crash.
1318 kes Extend new GUI API.
1319 kes Make the ua structure a class, and implement send_msg(),
1320 error_msg(), warning_msg(), and info_msg().
1322 kes Apply fix from for building wx-console on the Mac from
1324 kes Implement new select mechanism for GUI programs.
1325 kes Reorganize initialization of stackedWidgets in bat.
1327 kes Add updated nagios plugin supplied by Christian Masopust.
1329 kes More bat implementation.
1330 kes File migrate bug with Pool Occupancy using mediaid instead
1331 of jobids. Fixes bug #795.
1332 kes Fix orphaned buffers in filed backup and verify due to
1333 crypto buffers not freed during errors. Fixes bug #789.
1334 kes Extend new GUI api code to tree commands.
1335 kes Ensure that tree and dot commands check console ACLs.
1336 kes Permit marking directory with trailing slash.
1337 kes Allow 20 console connections (instead of only 10).
1339 kes Add smartctl call to bacula-sd.conf as an example of getting
1342 kes Modify jobq.c to let simultaneous restore jobs run. This may
1343 cause them to fail if they cannot get a drive.
1344 kes Add Client Connect Wait to Storage daemon to permit users to
1345 modify the time the SD waits for a FD connection.
1347 kes Correct virtual changer check which was backwards. This caused
1348 volumes to be unloaded into slots already occupied.
1350 kes Apply Command ACL filter to JobId list in restore command.
1351 kes Correct typeo in var.c patch.
1353 kes Don't let Bacula prune File or Job records for the current Job.
1354 kes Fix variable substitution pad + inc bug reported (with patch)
1357 kes Correct SQLite log table index as reported by Luca Berra.
1359 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1361 kes Begin implementing new comm signals for API.
1362 kes Fix a few places in lib/message.c where the open fd may
1364 kes Continue implementing lib/bsock.c (real class). Make jcr,
1365 who, host, and port private. There are new methods to access
1366 them for non-class use. This required touching a number of files.
1368 kes Add LANG=C to autoconf/randpass so it works with languages other
1369 than English. Fixes bug #788.
1371 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1373 You will not be able to generate Include/Exclude list any more.
1374 It will be fixed soon.
1375 If you want to use this, you can apply
1376 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1378 kes Restore of sockets created false error messages because Bacula
1379 no longer restores sockets, but the code was still trying to
1380 set the attributes on a non-existent file. Reported by a user.
1381 ebl finish RecyclePool feature
1382 Media will takes Pool.RecyclePool
1383 when moving from Scratch to a Pool or when user will do
1384 update volume=xxx frompool
1385 To use it, add RecyclePool = aPool to your Pool resource
1388 RecyclePool = Scratch
1392 kes Expand new BSOCK class adding signal() and new BNET signals.
1393 kes Begin enhancing the dot commands adding a new API function
1394 that returns more information and will make it easier
1395 to interface to the Director from a program.
1397 kes Make DEVICE fd private. Its new name is m_fd, and can be
1398 obtained with dev->fd() outside the class. This is the
1399 first of many DEVICE members to be made private.
1400 kes Implement Michael Renner's idea on having a virtual disk
1401 changer. I made some minor modifications (e.g. I did not
1402 implement the Virtual Changer directive, but simply set
1403 the Changer Command to an empty string.
1405 kes Implement a BSOCK send() method that writes the whole record
1406 in a single write() request rather than in two.
1407 ebl add update volume=xxx recyclepool=yyyy
1408 volume takes recyclepool from pool when using update volume=xxx from pool
1410 kes Fix encryption deblocking bug, which caused some restored files
1411 to be truncated. This fixes bug #763.
1412 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1413 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1415 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1416 ebl Use btime_t instead of uint64_t in media patch.
1418 kes Optimize the use of the database a bit in the Status dir command.
1419 Only open it when needed, ensure that if any previous database
1420 was opened, it is closed.
1422 kes Correct VolCatBytes bug from media patch.
1423 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1424 in the case of orphaned records.
1425 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1426 and File records in 300K chunks to be more efficient. This
1427 idea came from Juan Luis Frances (if I remember right).
1428 kes Apply Eric's scratch patch that moves a purged Volume to
1429 the RecyclePool. Question: how is RecyclePool set? what
1430 happens to the ScratchPool?
1431 kes Apply Eric's media patch that collects read/write media
1432 times as well as byte counts. This patch requires a
1433 simultaneous upgrade of the DIR and SD. Note, there
1434 should be some way to turn off timing. I'm not sure
1435 times are in Bacula units.
1436 kes Apply Eric's batch-insert patch.
1438 kes Update projects list.
1440 kes Implement Include/Exclude file lists in FD as dlists using
1441 the new dlistString class. This permits efficiently having
1442 large include/exclude lists and completes project Item 25.
1443 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1444 console is authorized to cancel the job. This fixes bug
1446 kes Modify SD so that the VolCatJobs medium record is updated
1447 at the beginning of a Job rather than the end. This
1448 fixes bug #775 where exceeding MaxVolJobs caused jobs
1450 kes Added a mutex around getting and setting Volume information
1451 so that multiple simultaneous jobs will single thread.
1453 Switch to using Subversion
1454 kes Remove src/pygtk-console/ from configure
1456 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1457 plus the entrypoints.
1458 kes Apply patch supplied that corrects debug print
1459 in canceling jobs for max run time. Supplied as
1460 part of bug #621, which was previously fixed.
1462 kes Test on job_canceled() and sd_msg_thread_done inside
1463 loop starting the message thread to avoid a race condition.
1465 kes Remove rl_catch_signal from console.c as it conflicted
1466 with the header definition. Fixes bug #765.
1467 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1469 kes Clarify some stored/acquire messages to indicate if the
1470 problem is with read or append.
1472 kes Fix memory leak with storage ids in cats/sql_get.c
1473 kes Terminate watchdog earlier to avoid reference to released
1474 memory -- reported by Jason Austin.
1475 kes Move closing the database from jobq.c to the director daemon
1476 termination routine. This fixes memory leaks for shadow jobs
1477 (i.e. migration jobs).
1478 kes Free up the unique jobid chain items in migrate.c. This fixes
1479 a memory leak problem.
1480 kes Convert some ugly looking for statements to use foreach_alist
1481 in findlib/find.c. This will facilitate converting the structures
1482 to use dlist (for large include/exclude lists).
1483 kes Fix a bug in the btree.c and btree.h routines, then rename them
1484 rblist and add them to be built in src/lib. Include some new
1485 methods written by Rudolf Cejka that make the code more readable
1486 (hides some of the ugly casting).
1487 kes Add set_next() and set_prev() methods which make the code much more
1488 readable. Also add a new dlistString class that facilitates storing
1489 strings in dlists. To be used in the large include/exclude lists.
1490 kes Make some trivial modifications to lib/tree.h that use rblist
1491 rather than dlist for storing the tree links. This was suggested
1492 by Rudolf Cejka. The result of this is that the restore tree now
1493 uses red-black binary trees rather than simple linked lists. This
1494 should give rather dramatic speed improvements for directories
1495 contining large numbers of directories/files (more than 10000).
1497 kes Fix maxruntime bug #621.
1499 ebl Implement the include JobID in spool file name project.
1500 kes Reorder projects file in order determined by Jan 2007 vote.
1501 kes Implement item #12 on project list -- quick release of FD by
1503 kes Fix open of SQLite3 db where user does not have write permission
1504 so that DIR does not crash. Fixes bug #761.
1506 kes Add back missing @ in Win32 Makefile.
1507 kes Change 'Device not configured to autolabel' from INFO
1509 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1510 which should restart an indefinite # of times.
1511 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1512 other DIR specifications.
1514 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1515 Fix path quoting in SQLite scripts.
1516 Fix problems with SHGetFolderPath.
1518 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1520 kes Fix Job restart on error bug that promotes an Inc to a Full
1521 backup. This should fix bug #755.
1522 kes Add qt-console and first cut of code.
1526 kes Fix Bacula->Documentation link on Win32 to point to index.html
1527 instead of bacula.html. Fixed bug #750.
1528 kes Return JobId in db_get_job_record() when JobId==0. This should
1530 kes Do not release source pointers when restarting a failed job.
1532 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1533 This *should* fix bug #747.
1534 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1537 kes Modify USTORE constructor to set an empty store_source string,
1538 and don't copy the store_source string in a cancel. Hopefully
1539 this will fix Arno's seg fault, bug #744.
1540 kes Add back code to disable conio in configure. Fixes bug #743.
1541 kes Correct the Options scanner in the FD to correctly handle
1542 SHA1 option, which was eating the next option. Reported by
1544 kes Add code to indicate when the SD is spooling, spool wait, and
1545 despooling as requested by Alan Brown.
1547 Version 2.0.0 released: 4 January 2007