1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Add information about IMPORT/EXPORT slots in mtx-script.
29 kes Enhance a couple of SD debug messages.
30 kes Tweak unload flag setting and ensure it is set during swap.
32 ebl Fix #1091 about bad output in estimate command.
34 kes Modify autochanger locking to attempt to avoid race
36 kes Make sure device not busy before doing label command.
37 kes Display open() errors except when polling. Previously too
38 many were suppressed. This should fix bug #1070.
39 kes Fix Win32 reparse points. Bacula will not recurse into any
40 reparse point directory, including mount points, unless the
41 directory is explicitly mentioned at the top level (same as
42 with Unix). A file that is linked to another file will be
43 backed up -- much as Unix does for hardlinked files.
46 kes Remove double quotes from ChangeLog and ReleaseNotes
47 kes Remove StorageId test when pruning and recycling (Eric's changes).
48 kes Remove old form of locking when getting volumes -- causes deadlock.
49 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
50 the name unique and to eliminate compile time error.
51 kes Add accurate.o to Win32 FD Makefile
53 kes Fix cats dll build on Win32 after db_update_job_end_record
54 calling sequence change.
55 ebl Switch to tokyo dbm instead of htable in accurate code
56 ebl Include tokyo dbm to bacula source tree
58 kes Fix buffer overruns detected by Coverity.
60 kes Tweak joblog display.
62 kes Implement --without-qwt
63 kes Fix layout of restore tree dialog
64 kes Add configure bat QWT libraries, so that bat can be built
65 with or without the QWT libaries.
67 ebl Add dummy tape driver for regression tests.
68 kes Make sure we unload the right slot when swapping.
70 kes Add debug times, reduce size of two-pool-changer test
72 ebl Tweak autoconf scripts for faketape
74 kes Improve SD reserve debug code.
75 kes Testing an improvement to free up volumes no longer in use.
77 kes Rework SD acquire for read to handle autochanger Volume
79 kes Implement regression that explicitly tests swapping a Volume
80 from one drive to another.
81 kes Enhance disk-changer to detect most error conditions.
82 kes Fix SD code so that it properly swaps a Volume between drives.
85 kes Apply libdbi patch from Joao Freitas for regress and for
86 Bacula trunk. Regress now works with libdbi. Nice.
87 kes Apply .nobackup patch from bug #1077 submitted by
89 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
90 name into jobs cloned via the run directive.
92 kes Prevent a Volume that is being swapped from being freed from
93 the volume list. This will most likely fix, at least partially,
95 kes Fix strippath so that it does not get a buffer overrun and crash FD.
97 kes Remove 50 millisec wait in SD that broke debugger.
98 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
99 that a job may run, counted from when the job was scheduled.
100 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
101 a job may block waiting for a resource, counted from when the job starts
102 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
103 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
104 that implements multiple commands per line in the console when using
105 readline. Modify the default to use a semicolon as the command separator.
107 ebl Fix SQL query in migration code.
108 ebl Make accurate mode with hash disk pass regression tests
110 ebl Implement first cut of accurate backup with hash disk.
112 kes Force unload of volume when wrong volume mounted in SD.
114 kes Fix bat seg fault at termination.
115 kes Add Bacula generated version to bat about box.
118 kes Experiment with allowing multiple read jobs.
119 kes Move final volume swapping code to DCR method and
120 call it from acquire_for_read().
121 kes When wrong volume is mounted during read, unload_autochanger.
123 kes Integrate the libdbi changes from Joao Henrique Freitas
125 kes Stop searching for Volumes in SD askdir if DIR returns the
126 same volume name twice in a row.
127 kes Close bat console windows first to eliminate error message
130 kes Tweak the swap Volume from one drive to another code so that
131 it now seems to work.
132 kes Resolve several problems with recycling that broke the new
133 code (these problems are in 2.2.9 as well).
134 kes Remove the volume lock when calling the sysop code.
135 kes Don't mark a reserved volume with no writers as unused otherwise
138 kes Rework class structures for VOLRES, DCR, and DEVICE to make
139 the method names a bit more logical, and for more logically
140 handling the responsibilities.
142 kes Remove redundant code in terminating the scheduler that just
143 causes a seg fault in many cases.
144 kes Cleanup releasing a volume and make it a DCR method.
145 kes Improve algorithm for detecting pre-reserved volume and
148 kes Tweak volume swapping code so it works.
149 kes Correct name overloading in mount.c
150 kes Replace released flag in VOLRES with reserved and add access
151 methods for the VOLRES class.
152 kes Prevent volume from being released while being swapped.
153 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
155 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
157 kes Refactor parts of stored/mount.c
159 ebl Add sanity checks for VolWriteTime and VolReadTime
160 ebl Take care of bad clock changes while computing VolWriteTime
161 and VolReadTime. This should fix or limit #1066
162 kes Correct error string numbers in dird/catreq.c
163 kes Restructure reserving, acquiring, and mounting volumes. Calls to
164 autochanger are deferred for mount.c -- simplifes the code.
166 kes Do not prune any running job. It just fails the job.
167 kes Lock the volumes when changing dev->reserved_device and marking
168 the volume unused otherwise the device can get reserved by
169 another job before the volume is released, thus blocking it.
171 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
172 kes Fix bug #1063, reuse of freed ptr in list nextvol.
173 kes Release regex compile buffer in filed/job.c
174 kes Add proper type of const char in sql_create.c
175 kes Turn off debug in daemon termination routines
176 kes Move free_volume_list() before devices are freed in stored.c
177 kes Fix reference to uninitalized stack variables in bregex.c.
178 This should correct bug #1067.
180 kes Fix possible seg fault in SD when freeing a volume entry.
182 kes Implement unload_dev() before swap device.
183 ebl Add statistics prunning with option and menu
184 kes Separate unload_dev() from unload_other_device() in autochanger.c
186 kes Apply patch from bug #1069 that corrects spurious error messages
187 when ACLs enabled on SGI but no ACL exists.
188 ebl Fix small segfault in bacula-sd when debug level is 500
189 kes Modify run_program() and run_program_full_output() to use
190 call by reference for the results string. This corrects a long
191 standing problem where the address of the string may be changed
192 in the subroutine but not in the calling program.
194 kes Re-enable code to remember last volume mounted on a non-tape
196 kes Add patch supplied in bug #1068 that fixes a SD crash when using
197 a Virtual autochanger.
198 kes Generate correct JobMedia records during spooling/despooling when
199 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
200 <tih@hamartun.priv.no> for excellent analysis and testing.
202 kes Tweak hash algorithm for htable using Martin Simmons idea
203 for doing a circular shift.
204 kes Remember what volume is in VTLs (previously turned off for
206 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
207 pointed out some problems in creating JobMedia records during
208 spooling with concurrent jobs. Fix the problem by updating the
209 start file position before despooling and generate a jobmedia
210 record at the end of despooling.
212 kes Fix handling of JobMedia records during spooling and when a
213 Volume is changed without actually writing data to the Volume.
215 kes Rework certain SD locking based on gdb tracebacks of deadlocks
216 sent by Eric. This code now uses only the volume_lock() rather
217 than the reservations lock when at EOM and acquiring a new
219 kes Ensure only one exit point in several subroutines.
221 kes Implement bsock code to permit locking. Use the new code in Verify
222 in the FD to prevent the heartbeat thread from disrupting the Verify
223 data sent to the Dir.
224 kes Modify SD locking to eliminate locking the reservations system from
225 outside the system. Use the volume lock when getting media data
226 and reserving a new volume at end of media.
227 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
228 when SD starts are not locked into place.
230 kes Fix error compiling runscript code on 64 bit machines.
231 kes Tweak Win32 mount point code.
232 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
233 cleared giving bad file estimate).
234 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
237 kes Keep Schedule run lists in order as suggested by
240 kes Implement autostart scripts for Debian.
241 ebl Implement upgrade catalog scripts.
243 ebl Apply jobstat patch for long term statistics. Have to implement
244 purge stats command and upgrade scripts.
245 kes Fix mtx-changer.in for broken Debian mt program.
247 kes Fix large number of JobMedia records reported by Eric Bollengier.
249 kes Apply doc fix from bug #1062.
250 kes Resolve crash and improper restore wx-console Win32 restore
251 GUI. Fixes bug #1065.
252 kes Update Win32 wxWidgets to latest version.
253 kes Attempt to do correct handling of Win32 mount points. Should
255 kes Fix Win32 FD backup/restore memory leak due to improper termination
256 of BackupRead/Write. This fixes bug# 1038.
258 ebl Reduce memory usage for accurate backup, working only with ctime
259 and mtime. (not all Lstat field)
260 About 40MB for my linux system (400.000 files)
262 kes Add dcr->reserved_volume flag that allows us to release a volume
263 even if it is not vol->released. This allows maxvol2 to work when
264 Volumes expire and we are already writing to the device (i.e. a
265 volume is pulled out from under us by another job terminating after
266 we reserve the drive).
268 ebl Permit multiple command/console per runscript definition.
269 RunScript { command = /bin/true ; command = /bin/false ... }
270 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
271 (restart an application) just after the VSS snapshot on windows.
272 kes Don't zap dcr values during release_volume() as they might
273 have the next Volume to be mounted.
274 kes Fix AIX prototype.
276 kes Second cut of drive switching during backup.
279 kes Update Win32 version of wxWidgets to most recent version.
280 kes Tweak Copy job details.
281 kes Rework dir_find_next_appendable_volume to make a bit more effort
282 to find a suitable volume before giving up.
284 kes Make ask_sysop_to_create... to return if waken from wait.
285 This helps get out of blocked conditions.
286 kes Experimental implementation of switch_device in reservations.
287 kes Implement FD version to allow easier protocol changes.
288 kes Add Plugin Options string -- not yet passed to FD.
289 kes Implement PluginOptions ACL.
291 kes Attempt to correct problems with restores with autochangers and
292 use counts going negative
293 kes Rework SD status command and implement API for bat. Implements
294 header, runing waitreservation, devices, volumes, spooling,
295 and terminated status keywords.
296 .status storage=xxx <keyword>
297 kes Clarify TLS error message by adding double quotes around name.
298 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
299 kes Pass jcr to tls routines so debug messages can be handled better.
300 kes Rework jobq resource allocation code, and possibly fix a bug
301 that caused reference counts to get out of sync.
303 kes Rename fd/dir plugin to use Bacula standard underscore.
304 kes Plugin work -- bring dir up to fd level.
305 kes Start implementation of VTL code
306 kes Fix Win32 build after adding new cats subroutine.
308 kes First cut at Duplicate Job implementation.
310 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
311 kes Start PluginOptions string, and refactor a bit of ua_run.c
312 ebl Apply Allan patch that permit to reset recyclepool.
314 kes Test patch -- possible fix or improvement for bug #1053
315 kes Refactor FD and SD status commands to permit new API code in
316 SD, and to fix Win32 build.
317 kes Win32 build is now working.
319 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
320 some ideas in patch from Scott Bailey.
321 kes Begin implementation of duplicate Job control.
322 kes Fix some of Win32 build after recent additions.
323 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
324 which causes the FD to detect whether or not the OS has the
325 honor no dump bit (*BSD systems), and if so, to skip backing up
326 any file with this bit set. The feature is enabled by setting
327 'honor no dump flag = yes' in the Options section of a FileSet.
329 kes Correct po warning message with datarootdir
330 kes Implement more code in dird.c to put configuration parsing in
331 a class rather than use globals.
332 kes Restructure SD status command for implementation of bat API
335 kes Suppress incorrect 'Will not descend from x into y' messages.
336 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
337 daemon globals used by parser.
338 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
340 kes Fix free of plugin_list when none exists.
342 ebl Apply accurate project patch.
344 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
345 on non-mempool object)
346 kes First cut of converting FD .status to work with bat API.
348 .status client=XXX header
349 .status client=XXX running
350 .status client=XXX terminated
351 kes Implement first cut of Copy Job.
352 kes Implement Catalog in Pool resource. It overrides catalog specified
353 in the Client resource.
355 kes Apply patch (with some difficulties) from Joao Henrique Freitas
356 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
358 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
359 ftruncate() actually works. In the case of some (cheap) NAS devices,
360 it does not, and so recycling NAS Volumes does not work. The code
361 simply unlink()s the file, then recreates it. This fixes bug #1011.
363 kes First incomplete cut of big malloc blocks for htable.
364 kes Tweak plugin code.
366 kes Plugin debug code + tweak a couple bat dialog layouts
368 kes Fix creating first JobMedia record during Migration to include
369 proper index. This caused slow restores of migrated jobs.
370 kes Temp fix to plugin name file_index.
371 kes Bacula backed up and restored a MySQL database.
373 kes Implement plugin restore.
374 kes Implement parsing of db_driver to give db_type index.
376 kes First cut of plugin restore code.
377 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
378 and do not strip paths on symbolic links.
379 kes Set catalog backup database and user name from values specified on
380 the ./configure line.
381 ebl Fix #1031 about wrong pool source information in job report.
384 kes Remove a redundant jcr argument to find_files, match_files, and
386 kes Implement '.status dir header|scheduled|running|terminated' that
387 prints the requested status section. With the exception of the
388 header, the other reports have fields separated by tabs (\t).
390 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
391 a resource embedded run command to find a since time if no explicit
392 since time was supplied on the command line.
393 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
394 that updates the state file at job termination time in addition to
395 when the daemon terminates.
397 kes First version where a plugin did a backup.
398 bpipe-fd.so created a backup file, wrote a test
399 string to it, and Bacua could restore this fabricated file.
401 kes Implement DB Driver = string for the DBI driver.
402 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
403 kes First cut of code for loading Win32 plugin dlls. Implement
404 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
405 and implement a dlfcn.h file based on opengroup's definitions of
408 kes First cut plugin directives.
410 kes Apply patch from bug #1049 to prevent stripping the path on a
412 kes Attempt to fix bug #1047 where stripping a path corrupts the
413 heap. Waiting for feedback.
414 kes Correct the Mount message not to suggest labeling a new tape
415 when doing a restore. Submitted by email by John Stoffel.
416 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
417 FD by using casting. Reported in bug #1042.
419 kes A bit of crypto cleanup. More later.
421 Release Version 2.2.8
423 kes Apply patch from Martin to correct bug #1040, bscan sets existing
425 kes Fixed important spelling error in doc -- bug #1045.
427 ebl Fix bextract to be able to extract non-portable Win32 data to
429 kes Move initialization of read/write res lock earlier in the code.
430 This fixes the crash with a null conf file. This fixes bug
432 kes Redefine CURES in lib/parse_conf to be URES and move it all
433 into lib/parse_conf.c -- this responds to bug #1042, but does
434 not fix it. The fix is not to compile with FORTIFY_SOURCE.
435 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
436 the trunk SVN. I don't think this was reported as a bug.
438 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
440 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
442 kes Add DataDespooling and DataCommitting status (committing is
443 the last despooling).
444 kes Finish implementation of new reservations code noted below.
446 kes Fix bsnprintf for float point numbers. I broke recently when
447 parameterizing some variables. This fixes bug #1036.
448 kes Undo recent reservations changes ... will apply them later
449 when they work better.
451 ebl Fixes #1034 which cause mysql to hang the connection after 8h
452 ebl Change default statistics target of filename.name and path.path
453 fields for PostgreSQL. This speeds lookup by indexes. Thanks
455 kes A few more tweaks to new reservation code. Make sure to clear
456 vol released flag when retaking volume. When reading label and
457 label is bad mark volume unused. When recycling, mark volume
458 unused so it can be renamed.
460 kes Fix reserve_volume() so it doesn't release a volume in use
461 (i.e. a volume entry not marked released). This should be
462 the last part needed to fix bug #1018.
464 kes Move Heartbeat documentation from Job to Director resource.
465 This fixes bug #1033.
467 kes Fix existing switch drive SD code to call autochanger to release
468 any old volume. This must be done to keep the autochanger from
469 releasing subsequently newly reserved volumes in doing a close().
470 This should fix bug #1018.
471 kes Fail if attempting to get console input in batch mode. This
472 should help fail RunScript console commands that are incomplete.
473 kes First cut implementing switch_drive() in SD (not actually called).
475 kes Implement first cut running console commands in a RunScript.
477 ebl Fixes bug #1028 where 'Selection Type' option was not usable
479 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
482 Release Version 2.2.7
484 kes Add new free_tls() entry point so that Win32 builds.
485 kes Fix compile warning in src/lib/util.c
486 kes Fix entry point for edit_job_codes() so that Win32 builds.
487 kes Fix seg fault Frank Sweetser reports in regression testing
488 on his systems. The problem was that the original author of
489 bsnprintf.c did not take into account the side effects of
490 using ++x in the argument to a #define.
491 kes Make SD protocol backward compatible with version 2.2.x.
493 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
494 because Bacula no longer restores sockets.
495 ebl Always use ignorecase fileset option on win32 FD.
497 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
498 that implements double quoting include names in conf files,
499 and also allows piping input by having the first character
500 be a vertical bar (|).
501 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
502 that implement %f in RunScripts to pass the FileSet name.
503 kes Skip leading | when lex input comes from a pipe as suggested
504 by Michael Stapelberg <michael@stapelberg.de>.
506 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
507 Nerijus Baliunas <nerijus@users.sourceforge.net>
509 kes Implement Plugin Directory and plugin events.
511 kes Implement a security enhancement: TLS authentication but no
512 encryption. Enabled by setting 'TLS Authentication = yes'.
513 Note when this is on, TLS encryption is turned OFF!
515 kes This patch corrects a problem where the maximum concurrent storage
516 jobs counter gets out of sync during restore jobs causing jobs to
517 'wait on max Storage jobs'. This patch fixes bug #1009.
519 kes This patch fixes bcopy so that it produces correct Volumes.
521 kes This patch eliminates spurious output to the console during a VerifyVolume
522 job that contains encrypted data. It fixes bug #1024.
524 kes This patch prevents the 'status dir' command from trying to use a scratch
525 volume and possibly moving it from one pool to another. This patch fixes
528 kes Add new include to postgresql.c suggested by Marc Cousins so
529 that it compiles correctly with pgre version 8.3.
531 kes Fix --archivedir addition to configure. Replace it with
532 --with-archivedir in configure.in This fixes the regression
534 kes This patch fixes bug #1012 where the job is canceled because
535 of Max Run Time exceeded when the job has not yet started.
537 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
538 one 'part' to write. Instead of each part being stored on disk,
539 written to DVD, then deleted from disk, all parts are written to disk,
540 and only the last is written and deleted from disk.
541 kes This patch fixes the status command to include the formating string for
542 JS_AttrInsterting. It fixes bug #1021.
543 kes This patch should fix the Mac OS X build problem on the latest
544 Darwin, where sys/types.h was not included correctly (apparently
545 due to a change in the Mac headers). The solution was to explicitly
546 ensure that it is defined for the ./configure.
547 This patch also has a rebuild of configure that includes the Debian
548 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
549 kes This patch should ensure that queued messages to the console are
550 displayed as soon as possible. It should fix bug 1007, but has been
551 reported not to work.
553 kes This patch fixes the infinite loop when trying to increase the
554 maximum number of volumes in a Pool during the add command.
555 This patch fixes bug #1008.
557 Release Version 2.2.6
559 db Remove extra data on estimate command in joblist for bat.
561 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
562 really change anything, but is the beginning of doing it *right*.
563 To do it completely right the LastWritten date must be passed to
564 the SD, but it is not yet done.
565 kes Minor tweaks to some bat restore SQL.
566 kes This patch fixes bug #1003 where putting the message output from
567 a Verify job into the catalog results in a recursive loop. The problem
568 seems to show up only with postgresql (to be verified).
569 kes Correct %x to %p in postgresql debug statement.
571 kes Fix bug #942 where lots of emails where generated when the heartbeat
572 interval was low and Bacula wanted a different tape from the one in
575 ebl Add new SD despooling attributes and Dir inserting attributes
576 job status codes in the catalog (Status table).
578 ebl Use qmake-qt4 instead of qmake when available (debian system).
580 kes Add a security warning to src/cats/make_catalog_backup.in indicating
581 that passing the password via the command line (arg 3) is insecure.
582 This responds to bug #990 (it doesn't fix it).
584 kes Set default debug_level to zero. This corrects bugs #991 and #993.
585 kes Fix a crash in bat when it cannot connect to the Director for example
586 if the Director is not running.
587 kes Remove redundant INDEX (JobId) from File table in the trunk.
589 kes Make explicit exception to GPL in LICENSE to permit linking
590 the Win32 FD with Microsoft VSS code.
591 kes Apply the Solaris package patch from
592 Masopust, Christian <christian.masopust@siemens.com>
593 kes Apply the patch to optionally add a timestamp in the debug output
594 submitted by Mariusz Czulada <manieq@wp.eu>.
596 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
597 backend (sql_strerror). Fixes bug #989
599 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
600 It applied with no problems.
601 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
603 kes Redirect stderror to stdin on mt status command in mtx-changer.in
604 since the status is returned on stderr on Solaris.
605 kes Activate Close button on tray-monitor window. This fixes
607 kes Check for NULL item in parse_conf.c before calling it. In the
608 case of Device, there is no item and this caused a seg fault when
609 Device appears in the conf file.
610 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
611 avoids pulling in config.h multiple times in some new code.
613 kes Fix spurious warning message printed when creating a volume with
614 a LabelFormat. This fixes bug #976.
616 Release Version 2.2.5
618 kes Add JobId in place of Job name in all the Jmsg() output.
619 kes Correct the APP_DESC for the Win32 storage service (remove an e).
621 kes Make maxvol-test and new more strict maxvol2-test work.
622 kes Print JobId in all Jmsg() job output.
624 kes Add new SD despooling attributes and Dir inserting attributes
625 job status codes. This fixes bug 961.
626 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
628 kes Fix doc issue. This fixes bug #963.
629 kes Fix listing performance problems in bat. Pointed out by
631 kes Remove old debug code.
632 kes Fix bat code that tests for Win32. This should fix bug #968
633 kes Query 5 list wrong Vol after migration. This fixes bug #960
635 ebl Fix #969 where user can't change Replace option in restore menu.
637 kes Save jcr in thread specific data (tsd) for each thread.
638 kes Make Dmsg() print JobId as -%u.
639 kes Make Jmsg, Emsg, and others automatically pickup the jobid
640 for the thread if it exists.
641 kes Remove old reservation debug jid code.
642 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
643 ebl Add an option that permit to specify spool size in job
644 definition. (Applying patches/testing/spoolsize_per_job.patch).
645 You must upgrade SD and DIR at the same time.
646 dvl Add new configuration item --archivedir
647 dvl Adjust regression tests to use tmp not /tmp. This will allow
648 multiple concurrent runs of the regression tests.
650 kes Fix race condition that drops final block written to volume.
651 This happens in rare cases with multiple simultaneous jobs
652 when the Volume fills. This fixes bug #964. May be related
653 to bug #935 and possibly #903.
654 kes Eliminate more strerror() and replace with bstrerror().
655 kes Remove BSD getopt and replace with unrestricted IBM version.
656 kes Fix Win32 build for changed calling sequences.
657 kes More tweaks to the mount volume routines to get everything
658 right. Changed variable name from find to have_vol, which is
659 much easier to understand.
660 kes Enhance btimer debug code.
662 kes Fix FD->SD authorization failure, which was due to spurious
663 wakeups from a pthread_cond_timedwait(). Simply check the
664 predicate before continuing. This fixes bug #953.
665 kes Add const char where needed (more to do). Remove temp debug code.
667 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
668 kes Don't overwrite error message in check_tables_version.
670 kes Unlock batch insert tables with same calls used elsewhere.
671 kes Allow starting 59 jobs a second.
672 kes Make SD session key more random.
673 kes Add retry for SQLite opening db if it fails. Probably helps
675 kes Suppress extra error messages during batch insert failure.
677 kes Add jcr to timer packets so if killed message can be sent to job.
678 kes Add JobId to all Dmsg() output.
679 kes Put some FD auth code on dbglvl rather than fixed.
680 kes Return insert attributes error message in db msg buffer to avoid
681 false error messages. Helps fix bug #966.
682 kes Separate batch init error messages. Probably helps fix bug #966.
683 kes Make SD code that contructs attribute insert check string lengths
685 kes If Dir gets an error during inserting attributes, cancel SD.
686 This reduces unnecessary error messages.
688 kes Correct search boolean for getting Volume info
689 ebl Cleanup batch insert code. Probably fixes bug #965.
690 kes Back out one small change to the reservation system (reserving a volume).
691 kes Rework how a Volume is mounted. It is now much more intelligent and
692 will always attempt to use any mounted volume if possible and reduces
693 calls to the Director asking about volumes.
695 kes Turn off some code when batch insert not enabled.
696 kes Edit FD name in connect error messages.
697 kes Rework the reservation system to take into account that the Director
698 might give us a Volume that is different from the current one being
699 used, and to ensure that we don't exceed Maximum Volume Jobs.
700 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
701 fatal error with multiple jobs running'
702 kes Add more debug code in reservation system.
703 kes Implement maxvol-test to check bug #947.
705 kes Add code to handle tray monitor separated from Win32 FD.
706 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
708 kes Add missed return in fixing verify bug -- trunk only.
709 ebl Fix a command parser issue causing a director segfault.
710 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
712 kes Increase the max block size to 4MB fixes bug #957.
713 kes ERABT if user sets min block size > max block size. Fixes bug #956.
714 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
715 is not properly mounted (recognized) during a poll.
716 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
717 Job that has differences reports Verify OK.
718 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
720 ebl Add an option to operate on all pools with update vol parameters.
721 This complete the project 20. Patch from Nigel Stepp.
722 ebl Add history support to bconsole when using readline.
723 Using Ctrl-D to exit doesn't update .bconsole_history
724 kes Modify new volume algorithm to use max MediaId for generating next
725 volume number rather than the count of Volumes. This should essentially
726 eliminate the failure rate if some volumes were deleted. Bug #921.
727 kes Begin implemention of Optimize Job Scheduling.
728 kes Implement restore callback that Dirk and I agreed on for bat
729 restore. This fixes bug #928. Restore of backup of zero files fails.
730 kes Fix SQL Catalog logging which broke with new db_escape_string
733 Release Version 2.2.4
735 kes Fix bacula_cats.def for new db_escape_string().
736 kes Increase size of name string when FD making connection to SD.
737 May fix bug #953. FD->SD connection failure.
739 kes Add code to help Dan debug 2drive-incremental-2disk test.
740 kes Add code to try to fix bug #908.
741 kes Add waits to multiple exit detection code to try to force pid
742 file to always be deleted.
743 kes Restore good dev.tar.gz to rescue set appropriate binary property.
745 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
746 trying to switch drives by checking for blocking before unblocking.
748 kes Cancel storage daemon in all cases where FD reports error. This
749 should fix virtually all cases of bug #920.
750 kes Fix db_escape_string() for MySQL which did not compile.
752 kes Fix error message that was clobbered when Dir tells SD it does not
753 have write permission on Volume. This should fix a minor point
754 in bug #942, but not the main problem.
755 kes Add code to cancel job in SD if FD connection fails. This should
757 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
758 dvl Pass jcr and db into db_escape_string() to enable better escaping
760 kes Fix migration code to get correct Volume name with multiple volumes
761 by skipping |. Fixes bug #936.
762 kes Implement patch supplied by Landon to fix bug #944 where using
763 TLS with bconsole uses 99+% of the CPU.
764 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
766 kes Move patches into patches directory.
768 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
771 ebl Using 'm' in bconsole will show messages like before,
772 and not memory usage.
773 kes Fix bug #935, and probably also bug #903 where files were not
774 restored. MediaId was not properly set in JobMedia record after
777 kes Suppress chown and chmod error messages if the FD is not running
780 kes Apply Martin Simmons' patch that should turn off the new API usage
781 when batch insert is turned off allowing building on older
783 kes Add ./configure search in qwt-qt4 for qwt package
785 kes Bacula is now free of 3rd party GPL copyrighted code!
787 kes Add guid_to_name.c/h which replace idcache.
788 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
790 ebl Detect if new PosgreSQL batch insert API is present.
791 kes Correct incorrect mempool call causing Director crash. Occurs on
792 systems without va_copy().
793 sb Update spec files for 2.2.1 release
795 kes Fix memory pool call in ua_output.c. bug #934.
796 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
797 Add test program to fnmatch.c
799 kes Integrate patch to README.vc8 from
800 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
801 edit it to get it into Unix patch format.
802 kes Implement mkpath.c to replace old FSF makepath.c
804 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
806 Release Version 2.2.1
808 kes Update POTFILES.in
809 kes Cleanup a few underquoted AC_DEFUNs in configure
810 kes Apply patch from Martin Simmons that adds a test for va_copy to
813 kes Fix bug #921 by increasing the number of tries to create a new volume
815 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
816 can be called multiple times. Implement a version for machines
817 without va_copy() that gets a big buffer.
819 kes Integrate more portable zone offset code into bsmtp.c
820 Submitted by Attila Fülöp.
822 kes Fix bad SD->FD return status reported by
823 (James Harper) <james.harper@bendigoit.com.au>
824 ebl Fix a bug in read_close_session which return random status
825 thanks to James Harper
827 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
828 and directory names during restore of single file/directories.
829 kes Add sanity checks to .sql command when string is empty. Hopefully
830 that will resolve Dirks Director crash.
832 kes Apply patch submitted by Martin Simmons that corrects a seg fault
833 in the bsmtp chat subroutine when debug is >= 10.
835 kes Fix Director crash when running bat SQL queries.
836 kes Add David's notes on Item 8: Copy pools.
838 kes Rework projects file to be current and ready for a vote.
839 kes Enhance lex scanner error message.
841 kes Tweak LICENSE file to mention BSD code.
842 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
843 if specified on the ./configure.
844 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
845 This class is intended to allow us to open a second bsock to the
846 Director while in the restore subdialog.
848 kes Fix configure to create bat Makefile before creating dependencies.
849 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
850 kes Add a tooltip to the tray monitor.
851 dvl Set the Director's PID file before dropping privs. This fixes
854 kes Update AUTHORs file
855 kes Increase the default max concurrent jobs to 20 in FD and SD to
856 correspond with the default .conf files.
857 kes Rewrite the Win32 service routines. This eliminates the 3 copies
858 some different, of the same file created by RN when porting the
860 kes Rearrange some of the Win32 directories and the placement of the files
862 kes Set DEVELOPER flag in version.h
864 ========================================================================
865 Release Version 2.2.0
867 kes Apply a second doc patch from Marc.
868 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
869 improves the tips section that discusses how to setup multiple
872 kes Update bat README file.
873 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
874 corrects a typo in the Recycle status check in db_find_next_volume().
875 This will probably fix a number of annoying problems with multiple
877 kes Modify most of dird/msgchan.c to use bsock class calls rather than
878 bnet calls -- no functionality change.
880 kes Modify the Verify output to specify if files are missing on
881 the Volume(s) or disk. Fixes confusion in bug #916.
882 kes When more than one Volume is read in a migration job, the last
883 Volume bytes reported are from the last read volume rather than
884 the last written volume. Fixed. This fixes bug #910.
885 kes Fix display of Recycle flag after update volume=foo recycle=yes.
886 It previously printed New Recyle flag is: no. This fixes bug
889 kes Correct seg fault when switching tape drives during restore.
890 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
891 be used until after 2.2.0 release.
893 kes Remove fnmatch() in SD that permitted wild card specifications.
896 kes Fix %g in filename returned by SQL for browse tree reported by
898 kes Fix configure so that it puts config.out in the cwd rather than
900 kes Attempt to fix the locking problem reported by Eric in bug #906.
901 kes Make berrno class to leave errno unchanged after constructor call.
902 kes Make bnet_server use the heap rather than the stack to allocate
903 its socket fd pointers to avoid a crash at termination. Problem
904 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
906 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
907 and putting it in depkgs-qt along with Qt4.3.
909 kes Rework code in acquire.c that switches drives for reading when
910 the Media Type does not match. This should fix bug #906
912 ebl Fix a director segfault during job setup #907
913 kes Correct seg fault in postgresql when first operation returns no
914 rows. Fixes Dirks File browser problem seg fault with bat.
916 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
917 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
920 kes Implement PopUp YES/NO dialog for bat.
922 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
924 kes Correct RunScript to terminate job in FD on failure.
925 kes Change abort_on_error and AbortJobOnError to fail_on_error
926 and FailJobOnError in RunScripts.
927 kes Minor tweaks of code formating in RunScripts, principally to
928 avoid depassing 80 columns.
930 kes Eliminate one #ifdef Win32 in bsmtp
931 kes Implement grow tool to grow a file for testing very large databases.
932 kes Add big-vol-test to test Bacula seeking with > 5GB.
935 kes Modify find_next_volume() to return all values in Media record.
936 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
940 kes Update Release notes
942 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
943 Warning, in previous beta version, all media get from scratch keep their
946 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
947 This should fix bug #842. Made a note to look at removing the temp
948 files at the end of the install.
949 kes Add ability to mount and unmount a file device providing it is
950 marked as being removable and has the appropriate mount and unmount
951 commands defined in the Device resource. This fixes bug #830.
952 kes When applying a storage override, release all previous storage
953 definitions rather than just prepending the new storage.
954 This should prevent a good deal of confusion.
956 kes Implement ./configure search for qwt libraries.
958 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
959 Win32 FD. This should fix bug #893.
960 kes Remove an unnecessary beep in Win32 init code.
961 kes Update copyright dates in Win32 executable about boxes.
962 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
963 code with a BSD getopt.c and getopt.h.
964 kes Remove sched.h from the Win32 compat directory -- not used.
965 kes Remove the Exit menu item from the Win32 tray monitor. If you really
966 need to shut it down, do it through the services panel or the command
968 kes Remove some inappropriate Bacula FSFE copyrights.
969 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
970 kes Fix regress config non-portable test as pointed out by
971 Florian Heigl <florian.heigl@gmail.com>
972 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
973 as pointed out by Florian Heigl <florian.heigl@gmail.com>
975 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
976 Reported by Frank Sweetser.
980 kes Fix client-only build.
981 kes Integrate client-only fixes for bsys (initgroups) and conio from
982 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
983 kes Make arguments to get_scratch_volume() in same order as other
985 kes Rework the prune_volumes() subroutine so that after purging and
986 no volume found in desired pool, it will check for a scratch
987 volume. This prevents recycling the whole scratch pool.
988 kes Add code to status storage to print boffset_t (largefile support).
990 kes Move qwt (Graphics libarary for Qt4) to depkgs.
991 kes You now need a --with-qwt=<dir> to be able to build bat.
992 kes Update src/win32/cats/bacula_cats.def to include the new
993 db_get_query_dbids() call on Win32.
995 kes Correct a problem when selecting a scratch volume and moving
996 it to another pool that lost some columns.
997 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
998 kes Enhance Autochanger error messages to include Volume and device name.
999 kes Rework prune_volumes() code to take account of InChanger flag,
1000 and to handle recycling volumes going to the Scratch pool and
1001 current pool because the RecyclePool directive.
1002 kes Implement a better and more efficient db_get_query_dbids() to
1003 handle creating and passing back a list of DBIds.
1007 kes Start work on new more efficient DBId subroutine. First use
1008 will be for recycling volume to Scratch inchanger.
1009 kes Increase number of JobIds in pruning from 1000 to 10000.
1010 This to be replaced by above routine.
1011 kes Begin implementation of building Qt4 on Win32.
1012 kes Correct typo in fix I added for bad TLS shutdown.
1013 kes Pull 2.0.3 patches into patches directory.
1014 kes Update Release notes. Include qt-console in line count.
1015 kes Update Projects file.
1017 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1018 bug in migration code where a job that spanned two volumes
1021 kes Implement new BST_DESPOOLING blocked state. Change from locking
1022 during despooling in SD to blocking. This means that other threads
1023 can work with the device structure, in particular the reservations
1024 system while despooling.
1026 kes Fix return in reservation message queue that missed clearing
1027 the jcr lock (implemented 26Jun07 below).
1028 kes Rename a number of dev methods to make locking function names
1030 kes Document locking in lock.c. Move lock structures to new file
1033 kes Move reservations message lock to lock jcr only this
1035 kes Move main SD locking code into lock.c (new file).
1036 kes Update Win32 build to include lock.c
1040 kes Dirk committed the qwt library code for drawing graphs in bat.
1041 kes Tweak install of qwt so that it is integrated with ./configure.
1043 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1044 out by Eric (my typo).
1045 ebl Fix configure.in to get batch mode enable
1046 kes Return correct string from authenticate.cpp in bat when connecting
1048 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1049 spurious line drops when using TLS.
1050 kes Do not file reparse points when restoring a file that already
1053 kes Implement Windows reparse points -- similar to directories, but
1054 we do not descend into it. This is a first cut. They seem to
1055 be backed up, but restore is not yet tested.
1056 kes Remove restore_blocking in tls code when shutting a socket to leave
1057 it in blocking mode. Hopefully this will fix the encryption bug
1058 reported by Frank Sweetser.
1059 kes When opening a file for backup, tell the OS that we are going to
1060 read it sequentially -- optimization.
1061 kes Change variable names in authenticate_director() to not conflict
1062 with member names in bat. Caused great confusion with compiler,
1065 kes Queue openssl error messages in case of comm problem.
1066 kes Do shutdown() call if socket terminated.
1067 kes Remove some duplicated code in tls.c
1068 kes Move more of the bsock member variables into private and access
1070 kes Add Frank Sweetser's tls-test to the regression suite.
1072 kes Add Swedish sv.po file
1074 kes Don't print clock skew message in FD if less than 3 seconds diff.
1075 kes Add a bit of VSS info to status client.
1076 kes Implement a first cut of Vista VSS, using Win2003 code.
1078 Release: 2.1.20 beta
1080 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1081 loaded tape but uses first drive).
1082 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1083 This was indeed a Win32 issue.
1085 kes Simplify search of autochanger for in-use Volume.
1086 kes Fix exit condition of check for in-use volume. kes Remove
1087 inappropriate my_postgresql_free_result() in db_close()
1089 kes Fix bad return in FD when encryption signature not found.
1090 Probably caused a crash.
1091 kes Inhibit missing encryption signature error messages for
1092 file types where no signature computed.
1093 kes Correct inverted check on autochanger in reservation system.
1094 kes Tweak debug code in autochanger reservation.
1096 kes Add some additional locking in the cats directory in subroutines
1097 that modify packet variables called from batch insert.
1098 kes Rework how dcrs are allocated. new_dcr() can now be called
1099 with an existing pointer, and it will simply clean it up.
1100 This allows the reservation system to test various different
1101 devices, and will permit easy device changes.
1102 kes A bunch of changes all over to handle new new_dcr() calling
1104 kes Work more on the Volume management in the SD. Remember Volumes
1105 for tape drives and for autochangers (even virtual disk changers).
1106 kes When looking at the Volume list to reserve a drive, handle
1107 autochanger names correctly by interating through the changer
1108 devices. Also call the Director to see if a Volume is suitable
1109 for the current job.
1110 kes Fix some bugs in bscan. Make sure all media records are written.
1111 Make sure that valid JobMedia records are written for disk files.
1112 Previously they were completely wrong.
1113 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1114 that the URLs don't change and so that the developers will all
1115 work off the same copy. Rebuild from scrach.
1116 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1118 Release: 2.1.18 beta
1120 kes Fix seg fault in FD from incorrect digest size.
1121 kes Fix argument to non-OpenSSL crypto.c subroutine.
1123 Release: 2.1.16 beta
1125 kes Remove a few malloc()s from the encryption code.
1126 kes Use the class calls to bsock in filed/backup.c and restore.c in
1127 place of the old bnet_xxx code.
1128 kes Implement code that does an on the fly calculation of the
1129 signing digest during restore of encrypted files. It makes
1130 a best guess at the algorithm, and if it is not correct, will
1131 then revert to the old code which reads the file after it is
1133 kes Implement at least one missing crypto stream in stream_to_ascii()
1134 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1135 #877 where a reload with bad syntax causes Dir to exit.
1137 Cut: 2.1.14 beta (not released)
1139 kes Do not free a volume on a tape drive until another volume is
1140 mounted and read, or the autochanger unloads the volume.
1141 This should help the SD re-use volumes that are already mounted,
1142 and should fix bug #886.
1143 kes Apply patch from user brettedgar that allows gnome2-console include
1144 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1145 kes Apply patch from Lucien Weller that fixes day of week calculation
1146 because of DST flag problem. Fixes bug #887.
1148 kes Move find_next_appendable_volume() to after acquiring a valid device
1149 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1151 kes Unable to reproduce bug 872. However added additional testing for
1153 kes Bug #874 resolved by documenting SQLite limitations.
1154 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1155 kes Bug #881 resolved by removing typo in mtx-changer script.
1156 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1157 approval. Added a link to the wiki on the web page, and implemented
1158 a backup from http://paramount.ind.wpi.edu
1160 kes Fix update allfrompool to pass pool name.
1162 kes Convert to pure GPL v2 license.
1163 kes Fix sscanf problems reported by Peter Buschman that caused
1164 a bus error on Solaris.
1165 kes Rework (simplify) the select prompt in bat.
1166 kes Move get_jobid_from_tid() into lib and create a
1168 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1169 should definitely fix the problem of lost error messages in the
1171 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1172 kes Eliminate tcpd.h from the project. Enclose the #include from the
1173 library with extern C ...
1174 kes Add print of signal name when a signal is trapped.
1176 Release: 2.1.12 beta
1178 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1180 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1181 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1182 makes SQLit3 run 30 times faster, though a bit less safe.
1183 kes Implement --with-batch-insert in configure and detection of thread
1184 safe libraries. It is on by default, but turned off if no thread
1185 safe library (e.g. SQLite 2) is available.
1187 kes Fix Bacula PostgreSQL buffer overruns.
1188 kes Do better checking for NULL results returned from PostgreSQL;
1189 implement retry for failed queries; clear results buffer after
1190 failed query. Hopefully this will correct the PostgreSQL failures.
1192 kes Implement algorithm to handle only one appendable volume with
1193 Prefer Mounted Volumes = no.
1194 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1195 returned from a query.
1196 kes Make volume lock recursive.
1197 kes Implement an additional volume reservation algorithm that
1198 starts by considering all reserved volumes then uses the
1199 old brute force algorithm of searching the resources to
1200 find a suitable device.
1201 kes Add new reservations debug code and refine the old code.
1202 kes Update the win32/dll/bacula.defs file.
1204 kes Tweak reservations algorithm to permit a few more cases, i.e.
1205 volume reserved, but on different drive, ...
1206 kes Enhance SD status to include Pool and Media Type for drive in a
1207 more readable format (a bit longer).
1208 kes Fix PostgreSQL double free.
1210 kes Minor refactoring of restore decryption code.
1211 kes Add code to smartall.c to detect double free of a buffer.
1213 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1214 so that bsmtp will create a correct email address (mailbox only).
1215 kes Modify 'memory' command so that the buffers are listed as 'In use'
1216 to avoid confusion with Orphaned buffers.
1217 kes I reworked the OpenSSL include/lib flags to be handled in
1218 the standard Bacula way, which should fix bug #863 concerning
1219 non-standard OpenSSL libraries.
1221 kes Implement Help Browser window for bat.
1222 kes Fix reload bug that reset StorageId to zero.
1224 kes Fix TLS #ifdefing when TLS turned off.
1225 kes Ensure that when labelling a tape with Slot=0 that InChanger
1227 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1229 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1230 add DISTINCT (required by PostgreSQL).
1231 kes Implement BSOCK authenticate_director() method. Eventually will
1232 authenicate all daemons.
1233 kes Move several more functions into the BSOCK class.
1235 kes Add code to tell the OS that we no longer need a cached
1236 file that we were reading. In findlib/bfile.c. Also,
1237 only cache files that we are reading. Thanks to
1238 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1239 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1240 kes Implement script to automatically generate cats and dll .def
1241 files for Win32 dll.
1242 kes Update README.mingw32 to include new .def file generation.
1243 kes Correct typo in UTF-8 error message as reported by:
1244 jhernandez <julianhernandez@gmail.com>
1245 kes Add additional sm_check() code on debug level 1.
1246 kes Set default debug level to 1.
1247 kes Trap SIGABRT in attempt to get traceback.
1249 kes Reduce bat connect timeout from 30 to 15 seconds.
1250 kes More restructuring and implementing BSOCK class in place of
1252 kes Remove a few unnecessary malloc() tests in crypto code.
1253 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1254 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1255 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1257 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1259 kes Fix Verify InitCatalog. The attributes were not pointing to the
1260 correct saved location.
1261 kes Implement message callback so that GUI is sure to get all
1262 daemon messages. Currently displayed in a dialog in bat.
1263 kes Ignore SIGUSR2 (Bacula timer) in bat.
1264 kes Apply regress patch from bug #859 to allow regress to work
1265 with Solaris compiler.
1267 kes Begin adding TLS support to bat.
1268 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1269 clean up lex.c and make it more readable.
1271 kes Move more bnet functions into the BSOCK class.
1272 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1273 kes Complete change of berrno strerror() method to bstrerror()
1275 Release: 2.1.10 beta
1277 kes Cleanup incorrect email addresses in bsmtp.
1278 kes Make bat display initial messages rather than discard them.
1280 kes First cut of adding .mod to the run command.
1281 kes Implement auto display of messages in bat.
1282 kes Enhanced preferences to allow all Bacula output to be
1285 kes Try to make bsmtp date routines more generic.
1286 kes Fixed bug #856 autochanger documentation.
1287 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1288 kes Add new cats entry point so Win32 builds.
1290 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1292 kes Do better checking for the MySQL 64 bit libraries looking for both
1293 .a and .so libraries.
1294 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1295 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1296 kes Require the thread safe version of MySQL during configure. Thanks
1297 to Andre Noll for pointing this out.
1298 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1299 continuing in migration code.
1300 kes Apply implementation of tray-monitor font derived from gnome-console
1301 submitted by Andreas Piesk <a.piesk@gmx.net>
1303 kes Eliminate important memory loss in SQLite
1304 kes Fixed the batch insert MySQL thread specific data that was not
1305 being freed. See cats/mysql.c:db_thread_cleanup().
1306 kes Fix restore before command.
1307 kes Convert old hdr.name to name() in a few places.
1308 kes Implement update jobid command.
1309 kes Return all time_t dates in db_get_job_record()
1310 kes Stop watchdog in SD earlier.
1311 kes Put Pool just after Storage in please mount message.
1312 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1315 kes Update the po files.
1316 kes Fix Verify InitCatalog by making it cache attributes.
1318 kes Change name bacula-bat to bat for man 1 page to correspond to
1320 kes Check for client and store NULL pointers in status command. This
1322 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1323 kes Fix sign extended editing of %p.
1324 kes Clean out a little old #ifdefing in cats/mysql.c
1326 kes If time diff between DIR and FD is more than 600 seconds convert
1327 INFO message to WARNING.
1328 kes Implement heap size display in status for all daemons.
1329 kes Attempt to fix MySQL db open memory loss (not successfull).
1330 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1331 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1332 Query. This looks like a MySQL but but by doing extra releases,
1333 the memory goes away. This should fix bug #847.
1335 kes When backup fails, cancel SD before waiting for sd termination.
1336 kes If SD is waiting for FD to connect during cancel, wake up the
1338 kes Fix fsf code so that errno is correctly reported.
1339 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1341 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1342 so that Bacula doesn't later stumble into a seg fault.
1343 kes Use the term Restore Client in the restore Job report.
1344 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1345 the original job's FileSetId.
1346 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1347 spooling in migration jobs. Not yet tested.
1348 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1349 reading conf file from a pipe. However, do it with open_bpipe()
1350 rather than popen. Not yet tested.
1352 kes Fix an ugly bug where the VolCatBytes were getting updated
1354 kes Implement bconsole memory command that prints current memory
1355 usage, plus smartalloc dump.
1356 kes Clarify some error messages in backup, admin, and migrate.
1357 kes Shrink label dialog to smaller size.
1358 kes Invert Cancel OK buttons on restore to be OK Cancel.
1359 kes More strerror() to bstrerror() conversions.
1361 kes Start implementing bstrerror() in place of strerror().
1362 kes Stripping path -- seems to work.
1364 kes Prevent door and port files from being restored (mostly
1366 kes Free an unreleased buffer in compat code.
1367 kes Change console Job name from *Console* to -Console- to eliminate
1368 Win32 filename problems. Put Win32 path separator when creating
1369 Console file. This fixes bug #846.
1370 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1372 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1374 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1375 to force Win32 error message.
1377 kes First cut strip path. The data should be passed to the FD,
1378 but nothing is done with it yet.
1379 kes Enhance the digest and signature routines in the crypto
1380 library to accept a JCR and to use it to print error messages
1381 so that they will go in the Job report rather than the daemon's
1383 kes Simplify some of the verify signature code.
1384 kes Simplify a few of the alternative returns in the signature
1387 ebl Use only POSIX regex instead of GNU regex in breg.c for
1388 File relocation. It fix broken freebsd compilation.
1389 kes Convert all other Dir files to use new ua class message
1391 kes Tentative fix for missing digest signature in bug 807.
1392 kes Correct handle problem in new win32_ftruncate routine.
1393 kes Convert ua_purge.c and ua_update.c to use new ua class
1394 message routines for bat.
1396 kes Correct incorrect installation of LICENSE in Win32 installer.
1397 kes Display LICENSE at the beginning of the Win32 install.
1398 kes Attempt to correct the need for the png files to be installed
1400 kes Reapply my bat.conf install script in qt-console. I think I
1401 editted bat.pro instead of bat.pro.in and it was lost.
1402 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1403 the /var/lock/subsys for subsysdir. Also corrects typos in the
1406 kes First cut update job.
1407 kes Correct configure to include qmake of src/qt-console directory.
1409 kes Make restore job yes/mod/no print in one command so GUI works.
1410 kes First cut implementing backup and restore client.
1411 kes Correct editing in Verify output that caused a seg fault.
1413 kes Insure that bat.conf is not overwritten during installation.
1414 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1415 while I was implementing migration in March 2006 !
1417 ebl Cleanup file relocation, using char *RegexWhere instead of
1418 char *where + bool where_use_regexp
1419 kes Update some manpages and add bat manpage.
1420 kes Make a first cut at converting bacula.spec.in for bwx-console
1422 kes Apply patch from John Goerzen to add hostname as fourth argument
1423 to make_catalog_backup script.
1424 kes Fix typos I introduced into bsmtp.c
1425 kes Make pm_strxxx() routines handle input of NULL pointer. This
1426 is to protect from NULL pointers returned from SQL databases.
1427 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1428 kes Add more debug to FIFO code -- fix fifo regression test.
1430 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1431 kes Add thread timer to bnet_connect() to break from OS if wait time
1434 kes Update Win32 build to include new files, new symbols, and
1436 kes Implement socket level heartbeat (tcp_keepidle)
1437 ebl Commit File relocation patch
1438 kes Make bat have 'make install' target.
1439 kes Warn during install if old gnome-console binary found.
1440 kes Warn during install if old wx-console binary found.
1441 kes Add -8 option to bsmtp command line to add content type utf-8.
1442 Fixes bug #809. (Character coding problem in bsmtp).
1443 kes If < is found in target (from, to, cc) then do not enclose the
1444 target in < > in bsmtp. Fixes bug #772 (malformed address).
1445 kes When printing certain items in dbcheck, stop after 300000.
1446 Fixes bug #822. (dbcheck loops).
1447 kes Incorrect status in Dir after waiting for mount with poll set.
1450 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1452 kes Print waiting to reserve a device every 5 mins.
1454 kes Don't call close_part in label.c if tape and relabel.
1455 kes Don't free volume if busy in close() -- should help with
1457 ebl Fix #824 RunScript bug (After script could be execute twice)
1458 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1459 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1460 Add a regression script to test RunScript
1462 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1465 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1466 deprecated. No additional bugs will be fixed, and they will be dropped
1467 in a future release (probably 2.4.0).
1468 kes Change name of wx-console to bwx-console to make it more Bacula
1470 kes Change the name of gnome-console to bgnome-console to make it
1473 kes Some time in March, a Feature Request with patch from Jorj Bauer
1474 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1476 The ability for the director to validate a Client (FD) CN against
1477 an arbitrary set of patterns rather than the hostname, with
1478 A new 'TLS Allowed CN' set of directives which are implemented
1479 in the Client resource. Then pattern matching is used in place
1480 of hostname matching against the Certificate's CN. As an example, we
1481 have certificates which (a) use a local CA, and (b) have a CN of the
1483 kes Add new/changed entry points to Win32 build
1484 kes Create unaccepted-projects for projects that are not accepted.
1485 kes Simplify locking in the reservations system.
1486 kes Add more debug code in reservations.
1487 kes Make sure error condition on reserving a volume is handled correctly.
1488 kes Correct handling of volume_in_use.
1489 kes Correct handling of initializing a device.
1490 kes Move handling of broadcasting releasing a device into release_device().
1491 kes Correct attaching dcr to dev so that it is only done if device
1492 is properly initiated.
1494 kes Locking debug level tweaks in SD.
1495 kes Tweak new Volume code.
1497 kes Add exec external-command [wait-seconds] to bconsole. This
1498 executes the external-command. Note! normally external-command
1499 should be enclosed in double quotes.
1500 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1501 it should normally be off in a production system.
1503 kes Implement die command for SD so that we can force it to dump.
1504 kes Implement SD lock debug code.
1505 kes Implement new algorithm for keeping Volume list in SD. It
1506 is now owned by the device.
1508 kes Implement new code for freeing in use volumes that should
1509 resolve if not all, some of the problems of multiple drive
1510 tape conflicts described in bug 801.
1512 kes Fix gui/bacula-web/images files in svn.
1513 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1515 ebl Fix a bug in batch mode (in string escape)
1516 kes Correct migration prune SQL typo that crept in in a
1517 recent 2.1.x change.
1519 kes Move bnet_despool() into class in bsock.c
1520 kes Modify job report to include director name and Build OS.
1521 kes Move drop root privilege and check_catalog() before fork.
1522 kes Add update database scripts (version 9 to 10) to updatedb directory.
1524 ebl Check size and age of each file after its backup to see if
1525 it has changed during backup, if 'checkfilechanges' is set.
1526 The FD will do an extra check (stat(2)) after
1527 each file backup. mtime, ctime and size are compared with
1528 'before backup' information. If time or size mismatch, an
1529 error message will be generated. You must upgrade FD to use it.
1531 kes Make database name and user configurable
1532 --with-db-name=xxx --with-db-user=xxx
1533 kes Add back database type to message.c for debugging.
1535 kes Implement dir_sql() which issues an SQL query.
1536 kes Modify bat medialist to use dir_sql() and do some minor C++
1537 formatting as well as eliminating a number of pointers, simplifing
1540 kes Fix some of the mtx-changer grep commands for tape label readers.
1541 kes Convert a number of bsendmsg into the appropriate send/warning/error
1542 message class calls.
1543 kes Suppress the using database message in the .sql command.
1544 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1546 kes Add context menu for floating a window.
1547 kes Some minor cleanup and name changes in qt-console
1548 kes Add doing mt setblk 0 in Win32 mtx-changer.
1549 kes Apply Martin's bug fix to move definition of ENODATA for
1551 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1552 sqlite2 and sqlite3.
1554 kes More pruning cleanup.
1555 kes Turn on wait_for_drive by default in mtx-changer.
1556 kes Turn on Batch insert code by default as it now passes regression.
1557 kes Add ./configure --enable-bat to enable building of Bat.
1558 No install yet though.
1560 kes Implement a new .sql command for bat.
1561 kes Implement code to turn off pruning in obtaining the next volume.
1562 Pruning is turned off for the status dir command, but turned on
1563 for SD requests and for the list nextvolume command.
1565 kes Correct Qmsg() that was not updated correctly when committing a
1566 previous change (probably the recent TLS patch).
1568 kes Write new subroutine is_volume_purged() that explicitly checks
1569 if the Volume is purged, and if so marks it as such. This should
1570 resolve problems reported about needing to mount twice to recycle
1572 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1573 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1574 amount of duplicated code.
1575 kes Do volume pruning only for the Media Type desired (reduces pruning time
1576 if multiple Media Types are in the same pool).
1577 kes Implement more detailed info in the Job report for the Bacula version
1579 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1581 ebl Add bbatch tool to bench database and insert mode.
1582 Fix sql quote stuff in batch mode
1583 Fix sql stuff for mysql
1585 kes Correct problems with am/pm scheduling. Fixes bug #808.
1586 kes Implement new prunning code that prunes up to 1000 jobs at
1587 the same time. The same technique can be applied to a number
1588 of other prune/purge subroutines.
1589 kes Add an insanity check when starting a new tape job to ensure
1590 that the tape position has not been changed. If so fail the
1592 kes Fix Win32 build for dlls to add the folllowing:
1593 src/lib/bsock.c -- new file with new entry points
1594 src/lib/dlist.c -- new entry points
1595 src/cats/sql_create.c -- new entry point
1596 src/cats/sql_cmds.c -- new DATA item exported
1598 ebl batch mode cleanup bscan-test is ok now.
1599 kes Implement SD code to check length of disk volume before appending.
1601 kes Correct return status on db_batch... routines.
1602 kes Add call to db_write_batch_file_records() to migration code.
1603 ebl Fix AfterJob timing
1604 kes Move the checking of the database in initializion of the Director
1605 to after we drop privileges. This avoids the need for both root
1606 and bacula access to the DB.
1607 kes Correct a misplaced variable definition in src/filed/backup.c
1608 kes Correct how the new batch insert db_create_attributes_record()
1609 uses the arguments. Caused a seg fault in bscan.
1610 kes Implement lock() and unlock() methods in DEVICE class.
1611 Implement block() and set_block(xx) methods in DEVICE class.
1612 kes Modify bnet_connect() so that it uses time() to check for the
1613 wait time expiring (on some OSes, some system calls may not
1614 return immediately).
1615 kes Modify Verify to obtain the previous JobId when it is actually
1616 running rather than at schedule time (as it was in 1.38.x).
1617 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1619 kes When checking pid in pid file, continue running if the pid is
1620 the same as ours. This occurs on IRIX after a system crash.
1623 kes Extend new GUI API.
1624 kes Make the ua structure a class, and implement send_msg(),
1625 error_msg(), warning_msg(), and info_msg().
1627 kes Apply fix from for building wx-console on the Mac from
1629 kes Implement new select mechanism for GUI programs.
1630 kes Reorganize initialization of stackedWidgets in bat.
1632 kes Add updated nagios plugin supplied by Christian Masopust.
1634 kes More bat implementation.
1635 kes File migrate bug with Pool Occupancy using mediaid instead
1636 of jobids. Fixes bug #795.
1637 kes Fix orphaned buffers in filed backup and verify due to
1638 crypto buffers not freed during errors. Fixes bug #789.
1639 kes Extend new GUI api code to tree commands.
1640 kes Ensure that tree and dot commands check console ACLs.
1641 kes Permit marking directory with trailing slash.
1642 kes Allow 20 console connections (instead of only 10).
1644 kes Add smartctl call to bacula-sd.conf as an example of getting
1647 kes Modify jobq.c to let simultaneous restore jobs run. This may
1648 cause them to fail if they cannot get a drive.
1649 kes Add Client Connect Wait to Storage daemon to permit users to
1650 modify the time the SD waits for a FD connection.
1652 kes Correct virtual changer check which was backwards. This caused
1653 volumes to be unloaded into slots already occupied.
1655 kes Apply Command ACL filter to JobId list in restore command.
1656 kes Correct typeo in var.c patch.
1658 kes Don't let Bacula prune File or Job records for the current Job.
1659 kes Fix variable substitution pad + inc bug reported (with patch)
1662 kes Correct SQLite log table index as reported by Luca Berra.
1664 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1666 kes Begin implementing new comm signals for API.
1667 kes Fix a few places in lib/message.c where the open fd may
1669 kes Continue implementing lib/bsock.c (real class). Make jcr,
1670 who, host, and port private. There are new methods to access
1671 them for non-class use. This required touching a number of files.
1673 kes Add LANG=C to autoconf/randpass so it works with languages other
1674 than English. Fixes bug #788.
1676 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1678 You will not be able to generate Include/Exclude list any more.
1679 It will be fixed soon.
1680 If you want to use this, you can apply
1681 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1683 kes Restore of sockets created false error messages because Bacula
1684 no longer restores sockets, but the code was still trying to
1685 set the attributes on a non-existent file. Reported by a user.
1686 ebl finish RecyclePool feature
1687 Media will takes Pool.RecyclePool
1688 when moving from Scratch to a Pool or when user will do
1689 update volume=xxx frompool
1690 To use it, add RecyclePool = aPool to your Pool resource
1693 RecyclePool = Scratch
1697 kes Expand new BSOCK class adding signal() and new BNET signals.
1698 kes Begin enhancing the dot commands adding a new API function
1699 that returns more information and will make it easier
1700 to interface to the Director from a program.
1702 kes Make DEVICE fd private. Its new name is m_fd, and can be
1703 obtained with dev->fd() outside the class. This is the
1704 first of many DEVICE members to be made private.
1705 kes Implement Michael Renner's idea on having a virtual disk
1706 changer. I made some minor modifications (e.g. I did not
1707 implement the Virtual Changer directive, but simply set
1708 the Changer Command to an empty string.
1710 kes Implement a BSOCK send() method that writes the whole record
1711 in a single write() request rather than in two.
1712 ebl add update volume=xxx recyclepool=yyyy
1713 volume takes recyclepool from pool when using update volume=xxx from pool
1715 kes Fix encryption deblocking bug, which caused some restored files
1716 to be truncated. This fixes bug #763.
1717 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1718 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1720 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1721 ebl Use btime_t instead of uint64_t in media patch.
1723 kes Optimize the use of the database a bit in the Status dir command.
1724 Only open it when needed, ensure that if any previous database
1725 was opened, it is closed.
1727 kes Correct VolCatBytes bug from media patch.
1728 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1729 in the case of orphaned records.
1730 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1731 and File records in 300K chunks to be more efficient. This
1732 idea came from Juan Luis Frances (if I remember right).
1733 kes Apply Eric's scratch patch that moves a purged Volume to
1734 the RecyclePool. Question: how is RecyclePool set? what
1735 happens to the ScratchPool?
1736 kes Apply Eric's media patch that collects read/write media
1737 times as well as byte counts. This patch requires a
1738 simultaneous upgrade of the DIR and SD. Note, there
1739 should be some way to turn off timing. I'm not sure
1740 times are in Bacula units.
1741 kes Apply Eric's batch-insert patch.
1743 kes Update projects list.
1745 kes Implement Include/Exclude file lists in FD as dlists using
1746 the new dlistString class. This permits efficiently having
1747 large include/exclude lists and completes project Item 25.
1748 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1749 console is authorized to cancel the job. This fixes bug
1751 kes Modify SD so that the VolCatJobs medium record is updated
1752 at the beginning of a Job rather than the end. This
1753 fixes bug #775 where exceeding MaxVolJobs caused jobs
1755 kes Added a mutex around getting and setting Volume information
1756 so that multiple simultaneous jobs will single thread.
1758 Switch to using Subversion
1759 kes Remove src/pygtk-console/ from configure
1761 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1762 plus the entrypoints.
1763 kes Apply patch supplied that corrects debug print
1764 in canceling jobs for max run time. Supplied as
1765 part of bug #621, which was previously fixed.
1767 kes Test on job_canceled() and sd_msg_thread_done inside
1768 loop starting the message thread to avoid a race condition.
1770 kes Remove rl_catch_signal from console.c as it conflicted
1771 with the header definition. Fixes bug #765.
1772 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1774 kes Clarify some stored/acquire messages to indicate if the
1775 problem is with read or append.
1777 kes Fix memory leak with storage ids in cats/sql_get.c
1778 kes Terminate watchdog earlier to avoid reference to released
1779 memory -- reported by Jason Austin.
1780 kes Move closing the database from jobq.c to the director daemon
1781 termination routine. This fixes memory leaks for shadow jobs
1782 (i.e. migration jobs).
1783 kes Free up the unique jobid chain items in migrate.c. This fixes
1784 a memory leak problem.
1785 kes Convert some ugly looking for statements to use foreach_alist
1786 in findlib/find.c. This will facilitate converting the structures
1787 to use dlist (for large include/exclude lists).
1788 kes Fix a bug in the btree.c and btree.h routines, then rename them
1789 rblist and add them to be built in src/lib. Include some new
1790 methods written by Rudolf Cejka that make the code more readable
1791 (hides some of the ugly casting).
1792 kes Add set_next() and set_prev() methods which make the code much more
1793 readable. Also add a new dlistString class that facilitates storing
1794 strings in dlists. To be used in the large include/exclude lists.
1795 kes Make some trivial modifications to lib/tree.h that use rblist
1796 rather than dlist for storing the tree links. This was suggested
1797 by Rudolf Cejka. The result of this is that the restore tree now
1798 uses red-black binary trees rather than simple linked lists. This
1799 should give rather dramatic speed improvements for directories
1800 contining large numbers of directories/files (more than 10000).
1802 kes Fix maxruntime bug #621.
1804 ebl Implement the include JobID in spool file name project.
1805 kes Reorder projects file in order determined by Jan 2007 vote.
1806 kes Implement item #12 on project list -- quick release of FD by
1808 kes Fix open of SQLite3 db where user does not have write permission
1809 so that DIR does not crash. Fixes bug #761.
1811 kes Add back missing @ in Win32 Makefile.
1812 kes Change 'Device not configured to autolabel' from INFO
1814 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1815 which should restart an indefinite # of times.
1816 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1817 other DIR specifications.
1819 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1820 Fix path quoting in SQLite scripts.
1821 Fix problems with SHGetFolderPath.
1823 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1825 kes Fix Job restart on error bug that promotes an Inc to a Full
1826 backup. This should fix bug #755.
1827 kes Add qt-console and first cut of code.
1831 kes Fix Bacula->Documentation link on Win32 to point to index.html
1832 instead of bacula.html. Fixed bug #750.
1833 kes Return JobId in db_get_job_record() when JobId==0. This should
1835 kes Do not release source pointers when restarting a failed job.
1837 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1838 This *should* fix bug #747.
1839 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1842 kes Modify USTORE constructor to set an empty store_source string,
1843 and don't copy the store_source string in a cancel. Hopefully
1844 this will fix Arno's seg fault, bug #744.
1845 kes Add back code to disable conio in configure. Fixes bug #743.
1846 kes Correct the Options scanner in the FD to correctly handle
1847 SHA1 option, which was eating the next option. Reported by
1849 kes Add code to indicate when the SD is spooling, spool wait, and
1850 despooling as requested by Alan Brown.
1852 Version 2.0.0 released: 4 January 2007