1 Technical notes on version 2.3
5 kes Attempt to correct problems with restores with autochangers and
6 use counts going negative
7 kes Rework SD status command and implement API for bat. Implements
8 header, runing waitreservation, devices, volumes, spooling,
9 and terminated status keywords.
10 .status storage=xxx <keyword>
11 kes Clarify TLS error message by adding double quotes around name.
12 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
13 kes Pass jcr to tls routines so debug messages can be handled better.
14 kes Rework jobq resource allocation code, and possibly fix a bug
15 that caused reference counts to get out of sync.
17 kes Rename fd/dir plugin to use Bacula standard underscore.
18 kes Plugin work -- bring dir up to fd level.
19 kes Start implementation of VTL code
20 kes Fix Win32 build after adding new cats subroutine.
22 kes First cut at Duplicate Job implementation.
24 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
25 kes Start PluginOptions string, and refactor a bit of ua_run.c
26 ebl Apply Allan patch that permit to reset recyclepool.
28 kes Test patch -- possible fix or improvement for bug #1053
29 kes Refactor FD and SD status commands to permit new API code in
30 SD, and to fix Win32 build.
31 kes Win32 build is now working.
33 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
34 some ideas in patch from Scott Bailey.
35 kes Begin implementation of duplicate Job control.
36 kes Fix some of Win32 build after recent additions.
37 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
38 which causes the FD to detect whether or not the OS has the
39 honor no dump bit (*BSD systems), and if so, to skip backing up
40 any file with this bit set. The feature is enabled by setting
41 'honor no dump flag = yes' in the Options section of a FileSet.
43 kes Correct po warning message with datarootdir
44 kes Implement more code in dird.c to put configuration parsing in
45 a class rather than use globals.
46 kes Restructure SD status command for implementation of bat API
49 kes Suppress incorrect 'Will not descend from x into y' messages.
50 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
51 daemon globals used by parser.
52 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
54 kes Fix free of plugin_list when none exists.
56 ebl Apply accurate project patch.
58 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
59 on non-mempool object)
60 kes First cut of converting FD .status to work with bat API.
62 .status client=XXX header
63 .status client=XXX running
64 .status client=XXX terminated
65 kes Implement first cut of Copy Job.
66 kes Implement Catalog in Pool resource. It overrides catalog specified
67 in the Client resource.
69 kes Apply patch (with some difficulties) from Joao Henrique Freitas
70 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
72 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
73 ftruncate() actually works. In the case of some (cheap) NAS devices,
74 it does not, and so recycling NAS Volumes does not work. The code
75 simply unlink()s the file, then recreates it. This fixes bug #1011.
77 kes First incomplete cut of big malloc blocks for htable.
78 kes Tweak plugin code.
80 kes Plugin debug code + tweak a couple bat dialog layouts
82 kes Fix creating first JobMedia record during Migration to include
83 proper index. This caused slow restores of migrated jobs.
84 kes Temp fix to plugin name file_index.
85 kes Bacula backed up and restored a MySQL database.
87 kes Implement plugin restore.
88 kes Implement parsing of db_driver to give db_type index.
90 kes First cut of plugin restore code.
91 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
92 and do not strip paths on symbolic links.
93 kes Set catalog backup database and user name from values specified on
95 ebl Fix #1031 about wrong pool source information in job report.
98 kes Remove a redundant jcr argument to find_files, match_files, and
100 kes Implement '.status dir header|scheduled|running|terminated' that
101 prints the requested status section. With the exception of the
102 header, the other reports have fields separated by tabs (\t).
104 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
105 a resource embedded run command to find a since time if no explicit
106 since time was supplied on the command line.
107 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
108 that updates the state file at job termination time in addition to
109 when the daemon terminates.
111 kes First version where a plugin did a backup.
112 bpipe-fd.so created a backup file, wrote a test
113 string to it, and Bacua could restore this fabricated file.
115 kes Implement DB Driver = string for the DBI driver.
116 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
117 kes First cut of code for loading Win32 plugin dlls. Implement
118 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
119 and implement a dlfcn.h file based on opengroup's definitions of
122 kes First cut plugin directives.
124 kes Apply patch from bug #1049 to prevent stripping the path on a
126 kes Attempt to fix bug #1047 where stripping a path corrupts the
127 heap. Waiting for feedback.
128 kes Correct the Mount message not to suggest labeling a new tape
129 when doing a restore. Submitted by email by John Stoffel.
130 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
131 FD by using casting. Reported in bug #1042.
133 kes A bit of crypto cleanup. More later.
135 Release Version 2.2.8
137 kes Apply patch from Martin to correct bug #1040, bscan sets existing
139 kes Fixed important spelling error in doc -- bug #1045.
141 ebl Fix bextract to be able to extract non-portable Win32 data to
143 kes Move initialization of read/write res lock earlier in the code.
144 This fixes the crash with a null conf file. This fixes bug
146 kes Redefine CURES in lib/parse_conf to be URES and move it all
147 into lib/parse_conf.c -- this responds to bug #1042, but does
148 not fix it. The fix is not to compile with FORTIFY_SOURCE.
149 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
150 the trunk SVN. I don't think this was reported as a bug.
152 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
154 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
156 kes Add DataDespooling and DataCommitting status (committing is
157 the last despooling).
158 kes Finish implementation of new reservations code noted below.
160 kes Fix bsnprintf for float point numbers. I broke recently when
161 parameterizing some variables. This fixes bug #1036.
162 kes Undo recent reservations changes ... will apply them later
163 when they work better.
165 ebl Fixes #1034 which cause mysql to hang the connection after 8h
166 ebl Change default statistics target of filename.name and path.path
167 fields for PostgreSQL. This speeds lookup by indexes. Thanks
169 kes A few more tweaks to new reservation code. Make sure to clear
170 vol released flag when retaking volume. When reading label and
171 label is bad mark volume unused. When recycling, mark volume
172 unused so it can be renamed.
174 kes Fix reserve_volume() so it doesn't release a volume in use
175 (i.e. a volume entry not marked released). This should be
176 the last part needed to fix bug #1018.
178 kes Move Heartbeat documentation from Job to Director resource.
179 This fixes bug #1033.
181 kes Fix existing switch drive SD code to call autochanger to release
182 any old volume. This must be done to keep the autochanger from
183 releasing subsequently newly reserved volumes in doing a close().
184 This should fix bug #1018.
185 kes Fail if attempting to get console input in batch mode. This
186 should help fail RunScript console commands that are incomplete.
187 kes First cut implementing switch_drive() in SD (not actually called).
189 kes Implement first cut running console commands in a RunScript.
191 ebl Fixes bug #1028 where 'Selection Type' option was not usable
193 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
196 Release Version 2.2.7
198 kes Add new free_tls() entry point so that Win32 builds.
199 kes Fix compile warning in src/lib/util.c
200 kes Fix entry point for edit_job_codes() so that Win32 builds.
201 kes Fix seg fault Frank Sweetser reports in regression testing
202 on his systems. The problem was that the original author of
203 bsnprintf.c did not take into account the side effects of
204 using ++x in the argument to a #define.
205 kes Make SD protocol backward compatible with version 2.2.x.
207 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
208 because Bacula no longer restores sockets.
209 ebl Always use ignorecase fileset option on win32 FD.
211 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
212 that implements double quoting include names in conf files,
213 and also allows piping input by having the first character
214 be a vertical bar (|).
215 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
216 that implement %f in RunScripts to pass the FileSet name.
217 kes Skip leading | when lex input comes from a pipe as suggested
218 by Michael Stapelberg <michael@stapelberg.de>.
220 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
221 Nerijus Baliunas <nerijus@users.sourceforge.net>
223 kes Implement Plugin Directory and plugin events.
225 kes Implement a security enhancement: TLS authentication but no
226 encryption. Enabled by setting 'TLS Authentication = yes'.
227 Note when this is on, TLS encryption is turned OFF!
229 kes This patch corrects a problem where the maximum concurrent storage
230 jobs counter gets out of sync during restore jobs causing jobs to
231 'wait on max Storage jobs'. This patch fixes bug #1009.
233 kes This patch fixes bcopy so that it produces correct Volumes.
235 kes This patch eliminates spurious output to the console during a VerifyVolume
236 job that contains encrypted data. It fixes bug #1024.
238 kes This patch prevents the 'status dir' command from trying to use a scratch
239 volume and possibly moving it from one pool to another. This patch fixes
242 kes Add new include to postgresql.c suggested by Marc Cousins so
243 that it compiles correctly with pgre version 8.3.
245 kes Fix --archivedir addition to configure. Replace it with
246 --with-archivedir in configure.in This fixes the regression
248 kes This patch fixes bug #1012 where the job is canceled because
249 of Max Run Time exceeded when the job has not yet started.
251 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
252 one 'part' to write. Instead of each part being stored on disk,
253 written to DVD, then deleted from disk, all parts are written to disk,
254 and only the last is written and deleted from disk.
255 kes This patch fixes the status command to include the formating string for
256 JS_AttrInsterting. It fixes bug #1021.
257 kes This patch should fix the Mac OS X build problem on the latest
258 Darwin, where sys/types.h was not included correctly (apparently
259 due to a change in the Mac headers). The solution was to explicitly
260 ensure that it is defined for the ./configure.
261 This patch also has a rebuild of configure that includes the Debian
262 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
263 kes This patch should ensure that queued messages to the console are
264 displayed as soon as possible. It should fix bug 1007, but has been
265 reported not to work.
267 kes This patch fixes the infinite loop when trying to increase the
268 maximum number of volumes in a Pool during the add command.
269 This patch fixes bug #1008.
271 Release Version 2.2.6
273 db Remove extra data on estimate command in joblist for bat.
275 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
276 really change anything, but is the beginning of doing it *right*.
277 To do it completely right the LastWritten date must be passed to
278 the SD, but it is not yet done.
279 kes Minor tweaks to some bat restore SQL.
280 kes This patch fixes bug #1003 where putting the message output from
281 a Verify job into the catalog results in a recursive loop. The problem
282 seems to show up only with postgresql (to be verified).
283 kes Correct %x to %p in postgresql debug statement.
285 kes Fix bug #942 where lots of emails where generated when the heartbeat
286 interval was low and Bacula wanted a different tape from the one in
289 ebl Add new SD despooling attributes and Dir inserting attributes
290 job status codes in the catalog (Status table).
292 ebl Use qmake-qt4 instead of qmake when available (debian system).
294 kes Add a security warning to src/cats/make_catalog_backup.in indicating
295 that passing the password via the command line (arg 3) is insecure.
296 This responds to bug #990 (it doesn't fix it).
298 kes Set default debug_level to zero. This corrects bugs #991 and #993.
299 kes Fix a crash in bat when it cannot connect to the Director for example
300 if the Director is not running.
301 kes Remove redundant INDEX (JobId) from File table in the trunk.
303 kes Make explicit exception to GPL in LICENSE to permit linking
304 the Win32 FD with Microsoft VSS code.
305 kes Apply the Solaris package patch from
306 Masopust, Christian <christian.masopust@siemens.com>
307 kes Apply the patch to optionally add a timestamp in the debug output
308 submitted by Mariusz Czulada <manieq@wp.eu>.
310 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
311 backend (sql_strerror). Fixes bug #989
313 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
314 It applied with no problems.
315 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
317 kes Redirect stderror to stdin on mt status command in mtx-changer.in
318 since the status is returned on stderr on Solaris.
319 kes Activate Close button on tray-monitor window. This fixes
321 kes Check for NULL item in parse_conf.c before calling it. In the
322 case of Device, there is no item and this caused a seg fault when
323 Device appears in the conf file.
324 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
325 avoids pulling in config.h multiple times in some new code.
327 kes Fix spurious warning message printed when creating a volume with
328 a LabelFormat. This fixes bug #976.
330 Release Version 2.2.5
332 kes Add JobId in place of Job name in all the Jmsg() output.
333 kes Correct the APP_DESC for the Win32 storage service (remove an e).
335 kes Make maxvol-test and new more strict maxvol2-test work.
336 kes Print JobId in all Jmsg() job output.
338 kes Add new SD despooling attributes and Dir inserting attributes
339 job status codes. This fixes bug 961.
340 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
342 kes Fix doc issue. This fixes bug #963.
343 kes Fix listing performance problems in bat. Pointed out by
345 kes Remove old debug code.
346 kes Fix bat code that tests for Win32. This should fix bug #968
347 kes Query 5 list wrong Vol after migration. This fixes bug #960
349 ebl Fix #969 where user can't change Replace option in restore menu.
351 kes Save jcr in thread specific data (tsd) for each thread.
352 kes Make Dmsg() print JobId as -%u.
353 kes Make Jmsg, Emsg, and others automatically pickup the jobid
354 for the thread if it exists.
355 kes Remove old reservation debug jid code.
356 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
357 ebl Add an option that permit to specify spool size in job
358 definition. (Applying patches/testing/spoolsize_per_job.patch).
359 You must upgrade SD and DIR at the same time.
360 dvl Add new configuration item --archivedir
361 dvl Adjust regression tests to use tmp not /tmp. This will allow
362 multiple concurrent runs of the regression tests.
364 kes Fix race condition that drops final block written to volume.
365 This happens in rare cases with multiple simultaneous jobs
366 when the Volume fills. This fixes bug #964. May be related
367 to bug #935 and possibly #903.
368 kes Eliminate more strerror() and replace with bstrerror().
369 kes Remove BSD getopt and replace with unrestricted IBM version.
370 kes Fix Win32 build for changed calling sequences.
371 kes More tweaks to the mount volume routines to get everything
372 right. Changed variable name from find to have_vol, which is
373 much easier to understand.
374 kes Enhance btimer debug code.
376 kes Fix FD->SD authorization failure, which was due to spurious
377 wakeups from a pthread_cond_timedwait(). Simply check the
378 predicate before continuing. This fixes bug #953.
379 kes Add const char where needed (more to do). Remove temp debug code.
381 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
382 kes Don't overwrite error message in check_tables_version.
384 kes Unlock batch insert tables with same calls used elsewhere.
385 kes Allow starting 59 jobs a second.
386 kes Make SD session key more random.
387 kes Add retry for SQLite opening db if it fails. Probably helps
389 kes Suppress extra error messages during batch insert failure.
391 kes Add jcr to timer packets so if killed message can be sent to job.
392 kes Add JobId to all Dmsg() output.
393 kes Put some FD auth code on dbglvl rather than fixed.
394 kes Return insert attributes error message in db msg buffer to avoid
395 false error messages. Helps fix bug #966.
396 kes Separate batch init error messages. Probably helps fix bug #966.
397 kes Make SD code that contructs attribute insert check string lengths
399 kes If Dir gets an error during inserting attributes, cancel SD.
400 This reduces unnecessary error messages.
402 kes Correct search boolean for getting Volume info
403 ebl Cleanup batch insert code. Probably fixes bug #965.
404 kes Back out one small change to the reservation system (reserving a volume).
405 kes Rework how a Volume is mounted. It is now much more intelligent and
406 will always attempt to use any mounted volume if possible and reduces
407 calls to the Director asking about volumes.
409 kes Turn off some code when batch insert not enabled.
410 kes Edit FD name in connect error messages.
411 kes Rework the reservation system to take into account that the Director
412 might give us a Volume that is different from the current one being
413 used, and to ensure that we don't exceed Maximum Volume Jobs.
414 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
415 fatal error with multiple jobs running'
416 kes Add more debug code in reservation system.
417 kes Implement maxvol-test to check bug #947.
419 kes Add code to handle tray monitor separated from Win32 FD.
420 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
422 kes Add missed return in fixing verify bug -- trunk only.
423 ebl Fix a command parser issue causing a director segfault.
424 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
426 kes Increase the max block size to 4MB fixes bug #957.
427 kes ERABT if user sets min block size > max block size. Fixes bug #956.
428 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
429 is not properly mounted (recognized) during a poll.
430 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
431 Job that has differences reports Verify OK.
432 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
434 ebl Add an option to operate on all pools with update vol parameters.
435 This complete the project 20. Patch from Nigel Stepp.
436 ebl Add history support to bconsole when using readline.
437 Using Ctrl-D to exit doesn't update .bconsole_history
438 kes Modify new volume algorithm to use max MediaId for generating next
439 volume number rather than the count of Volumes. This should essentially
440 eliminate the failure rate if some volumes were deleted. Bug #921.
441 kes Begin implemention of Optimize Job Scheduling.
442 kes Implement restore callback that Dirk and I agreed on for bat
443 restore. This fixes bug #928. Restore of backup of zero files fails.
444 kes Fix SQL Catalog logging which broke with new db_escape_string
447 Release Version 2.2.4
449 kes Fix bacula_cats.def for new db_escape_string().
450 kes Increase size of name string when FD making connection to SD.
451 May fix bug #953. FD->SD connection failure.
453 kes Add code to help Dan debug 2drive-incremental-2disk test.
454 kes Add code to try to fix bug #908.
455 kes Add waits to multiple exit detection code to try to force pid
456 file to always be deleted.
457 kes Restore good dev.tar.gz to rescue set appropriate binary property.
459 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
460 trying to switch drives by checking for blocking before unblocking.
462 kes Cancel storage daemon in all cases where FD reports error. This
463 should fix virtually all cases of bug #920.
464 kes Fix db_escape_string() for MySQL which did not compile.
466 kes Fix error message that was clobbered when Dir tells SD it does not
467 have write permission on Volume. This should fix a minor point
468 in bug #942, but not the main problem.
469 kes Add code to cancel job in SD if FD connection fails. This should
471 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
472 dvl Pass jcr and db into db_escape_string() to enable better escaping
474 kes Fix migration code to get correct Volume name with multiple volumes
475 by skipping |. Fixes bug #936.
476 kes Implement patch supplied by Landon to fix bug #944 where using
477 TLS with bconsole uses 99+% of the CPU.
478 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
480 kes Move patches into patches directory.
482 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
485 ebl Using 'm' in bconsole will show messages like before,
486 and not memory usage.
487 kes Fix bug #935, and probably also bug #903 where files were not
488 restored. MediaId was not properly set in JobMedia record after
491 kes Suppress chown and chmod error messages if the FD is not running
494 kes Apply Martin Simmons' patch that should turn off the new API usage
495 when batch insert is turned off allowing building on older
497 kes Add ./configure search in qwt-qt4 for qwt package
499 kes Bacula is now free of 3rd party GPL copyrighted code!
501 kes Add guid_to_name.c/h which replace idcache.
502 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
504 ebl Detect if new PosgreSQL batch insert API is present.
505 kes Correct incorrect mempool call causing Director crash. Occurs on
506 systems without va_copy().
507 sb Update spec files for 2.2.1 release
509 kes Fix memory pool call in ua_output.c. bug #934.
510 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
511 Add test program to fnmatch.c
513 kes Integrate patch to README.vc8 from
514 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
515 edit it to get it into Unix patch format.
516 kes Implement mkpath.c to replace old FSF makepath.c
518 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
520 Release Version 2.2.1
522 kes Update POTFILES.in
523 kes Cleanup a few underquoted AC_DEFUNs in configure
524 kes Apply patch from Martin Simmons that adds a test for va_copy to
527 kes Fix bug #921 by increasing the number of tries to create a new volume
529 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
530 can be called multiple times. Implement a version for machines
531 without va_copy() that gets a big buffer.
533 kes Integrate more portable zone offset code into bsmtp.c
534 Submitted by Attila Fülöp.
536 kes Fix bad SD->FD return status reported by
537 (James Harper) <james.harper@bendigoit.com.au>
538 ebl Fix a bug in read_close_session which return random status
539 thanks to James Harper
541 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
542 and directory names during restore of single file/directories.
543 kes Add sanity checks to .sql command when string is empty. Hopefully
544 that will resolve Dirks Director crash.
546 kes Apply patch submitted by Martin Simmons that corrects a seg fault
547 in the bsmtp chat subroutine when debug is >= 10.
549 kes Fix Director crash when running bat SQL queries.
550 kes Add David's notes on Item 8: Copy pools.
552 kes Rework projects file to be current and ready for a vote.
553 kes Enhance lex scanner error message.
555 kes Tweak LICENSE file to mention BSD code.
556 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
557 if specified on the ./configure.
558 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
559 This class is intended to allow us to open a second bsock to the
560 Director while in the restore subdialog.
562 kes Fix configure to create bat Makefile before creating dependencies.
563 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
564 kes Add a tooltip to the tray monitor.
565 dvl Set the Director's PID file before dropping privs. This fixes
568 kes Update AUTHORs file
569 kes Increase the default max concurrent jobs to 20 in FD and SD to
570 correspond with the default .conf files.
571 kes Rewrite the Win32 service routines. This eliminates the 3 copies
572 some different, of the same file created by RN when porting the
574 kes Rearrange some of the Win32 directories and the placement of the files
576 kes Set DEVELOPER flag in version.h
578 ========================================================================
579 Release Version 2.2.0
581 kes Apply a second doc patch from Marc.
582 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
583 improves the tips section that discusses how to setup multiple
586 kes Update bat README file.
587 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
588 corrects a typo in the Recycle status check in db_find_next_volume().
589 This will probably fix a number of annoying problems with multiple
591 kes Modify most of dird/msgchan.c to use bsock class calls rather than
592 bnet calls -- no functionality change.
594 kes Modify the Verify output to specify if files are missing on
595 the Volume(s) or disk. Fixes confusion in bug #916.
596 kes When more than one Volume is read in a migration job, the last
597 Volume bytes reported are from the last read volume rather than
598 the last written volume. Fixed. This fixes bug #910.
599 kes Fix display of Recycle flag after update volume=foo recycle=yes.
600 It previously printed New Recyle flag is: no. This fixes bug
603 kes Correct seg fault when switching tape drives during restore.
604 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
605 be used until after 2.2.0 release.
607 kes Remove fnmatch() in SD that permitted wild card specifications.
610 kes Fix %g in filename returned by SQL for browse tree reported by
612 kes Fix configure so that it puts config.out in the cwd rather than
614 kes Attempt to fix the locking problem reported by Eric in bug #906.
615 kes Make berrno class to leave errno unchanged after constructor call.
616 kes Make bnet_server use the heap rather than the stack to allocate
617 its socket fd pointers to avoid a crash at termination. Problem
618 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
620 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
621 and putting it in depkgs-qt along with Qt4.3.
623 kes Rework code in acquire.c that switches drives for reading when
624 the Media Type does not match. This should fix bug #906
626 ebl Fix a director segfault during job setup #907
627 kes Correct seg fault in postgresql when first operation returns no
628 rows. Fixes Dirks File browser problem seg fault with bat.
630 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
631 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
634 kes Implement PopUp YES/NO dialog for bat.
636 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
638 kes Correct RunScript to terminate job in FD on failure.
639 kes Change abort_on_error and AbortJobOnError to fail_on_error
640 and FailJobOnError in RunScripts.
641 kes Minor tweaks of code formating in RunScripts, principally to
642 avoid depassing 80 columns.
644 kes Eliminate one #ifdef Win32 in bsmtp
645 kes Implement grow tool to grow a file for testing very large databases.
646 kes Add big-vol-test to test Bacula seeking with > 5GB.
649 kes Modify find_next_volume() to return all values in Media record.
650 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
654 kes Update Release notes
656 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
657 Warning, in previous beta version, all media get from scratch keep their
660 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
661 This should fix bug #842. Made a note to look at removing the temp
662 files at the end of the install.
663 kes Add ability to mount and unmount a file device providing it is
664 marked as being removable and has the appropriate mount and unmount
665 commands defined in the Device resource. This fixes bug #830.
666 kes When applying a storage override, release all previous storage
667 definitions rather than just prepending the new storage.
668 This should prevent a good deal of confusion.
670 kes Implement ./configure search for qwt libraries.
672 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
673 Win32 FD. This should fix bug #893.
674 kes Remove an unnecessary beep in Win32 init code.
675 kes Update copyright dates in Win32 executable about boxes.
676 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
677 code with a BSD getopt.c and getopt.h.
678 kes Remove sched.h from the Win32 compat directory -- not used.
679 kes Remove the Exit menu item from the Win32 tray monitor. If you really
680 need to shut it down, do it through the services panel or the command
682 kes Remove some inappropriate Bacula FSFE copyrights.
683 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
684 kes Fix regress config non-portable test as pointed out by
685 Florian Heigl <florian.heigl@gmail.com>
686 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
687 as pointed out by Florian Heigl <florian.heigl@gmail.com>
689 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
690 Reported by Frank Sweetser.
694 kes Fix client-only build.
695 kes Integrate client-only fixes for bsys (initgroups) and conio from
696 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
697 kes Make arguments to get_scratch_volume() in same order as other
699 kes Rework the prune_volumes() subroutine so that after purging and
700 no volume found in desired pool, it will check for a scratch
701 volume. This prevents recycling the whole scratch pool.
702 kes Add code to status storage to print boffset_t (largefile support).
704 kes Move qwt (Graphics libarary for Qt4) to depkgs.
705 kes You now need a --with-qwt=<dir> to be able to build bat.
706 kes Update src/win32/cats/bacula_cats.def to include the new
707 db_get_query_dbids() call on Win32.
709 kes Correct a problem when selecting a scratch volume and moving
710 it to another pool that lost some columns.
711 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
712 kes Enhance Autochanger error messages to include Volume and device name.
713 kes Rework prune_volumes() code to take account of InChanger flag,
714 and to handle recycling volumes going to the Scratch pool and
715 current pool because the RecyclePool directive.
716 kes Implement a better and more efficient db_get_query_dbids() to
717 handle creating and passing back a list of DBIds.
721 kes Start work on new more efficient DBId subroutine. First use
722 will be for recycling volume to Scratch inchanger.
723 kes Increase number of JobIds in pruning from 1000 to 10000.
724 This to be replaced by above routine.
725 kes Begin implementation of building Qt4 on Win32.
726 kes Correct typo in fix I added for bad TLS shutdown.
727 kes Pull 2.0.3 patches into patches directory.
728 kes Update Release notes. Include qt-console in line count.
729 kes Update Projects file.
731 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
732 bug in migration code where a job that spanned two volumes
735 kes Implement new BST_DESPOOLING blocked state. Change from locking
736 during despooling in SD to blocking. This means that other threads
737 can work with the device structure, in particular the reservations
738 system while despooling.
740 kes Fix return in reservation message queue that missed clearing
741 the jcr lock (implemented 26Jun07 below).
742 kes Rename a number of dev methods to make locking function names
744 kes Document locking in lock.c. Move lock structures to new file
747 kes Move reservations message lock to lock jcr only this
749 kes Move main SD locking code into lock.c (new file).
750 kes Update Win32 build to include lock.c
754 kes Dirk committed the qwt library code for drawing graphs in bat.
755 kes Tweak install of qwt so that it is integrated with ./configure.
757 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
758 out by Eric (my typo).
759 ebl Fix configure.in to get batch mode enable
760 kes Return correct string from authenticate.cpp in bat when connecting
762 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
763 spurious line drops when using TLS.
764 kes Do not file reparse points when restoring a file that already
767 kes Implement Windows reparse points -- similar to directories, but
768 we do not descend into it. This is a first cut. They seem to
769 be backed up, but restore is not yet tested.
770 kes Remove restore_blocking in tls code when shutting a socket to leave
771 it in blocking mode. Hopefully this will fix the encryption bug
772 reported by Frank Sweetser.
773 kes When opening a file for backup, tell the OS that we are going to
774 read it sequentially -- optimization.
775 kes Change variable names in authenticate_director() to not conflict
776 with member names in bat. Caused great confusion with compiler,
779 kes Queue openssl error messages in case of comm problem.
780 kes Do shutdown() call if socket terminated.
781 kes Remove some duplicated code in tls.c
782 kes Move more of the bsock member variables into private and access
784 kes Add Frank Sweetser's tls-test to the regression suite.
786 kes Add Swedish sv.po file
788 kes Don't print clock skew message in FD if less than 3 seconds diff.
789 kes Add a bit of VSS info to status client.
790 kes Implement a first cut of Vista VSS, using Win2003 code.
794 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
795 loaded tape but uses first drive).
796 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
797 This was indeed a Win32 issue.
799 kes Simplify search of autochanger for in-use Volume.
800 kes Fix exit condition of check for in-use volume. kes Remove
801 inappropriate my_postgresql_free_result() in db_close()
803 kes Fix bad return in FD when encryption signature not found.
804 Probably caused a crash.
805 kes Inhibit missing encryption signature error messages for
806 file types where no signature computed.
807 kes Correct inverted check on autochanger in reservation system.
808 kes Tweak debug code in autochanger reservation.
810 kes Add some additional locking in the cats directory in subroutines
811 that modify packet variables called from batch insert.
812 kes Rework how dcrs are allocated. new_dcr() can now be called
813 with an existing pointer, and it will simply clean it up.
814 This allows the reservation system to test various different
815 devices, and will permit easy device changes.
816 kes A bunch of changes all over to handle new new_dcr() calling
818 kes Work more on the Volume management in the SD. Remember Volumes
819 for tape drives and for autochangers (even virtual disk changers).
820 kes When looking at the Volume list to reserve a drive, handle
821 autochanger names correctly by interating through the changer
822 devices. Also call the Director to see if a Volume is suitable
824 kes Fix some bugs in bscan. Make sure all media records are written.
825 Make sure that valid JobMedia records are written for disk files.
826 Previously they were completely wrong.
827 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
828 that the URLs don't change and so that the developers will all
829 work off the same copy. Rebuild from scrach.
830 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
834 kes Fix seg fault in FD from incorrect digest size.
835 kes Fix argument to non-OpenSSL crypto.c subroutine.
839 kes Remove a few malloc()s from the encryption code.
840 kes Use the class calls to bsock in filed/backup.c and restore.c in
841 place of the old bnet_xxx code.
842 kes Implement code that does an on the fly calculation of the
843 signing digest during restore of encrypted files. It makes
844 a best guess at the algorithm, and if it is not correct, will
845 then revert to the old code which reads the file after it is
847 kes Implement at least one missing crypto stream in stream_to_ascii()
848 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
849 #877 where a reload with bad syntax causes Dir to exit.
851 Cut: 2.1.14 beta (not released)
853 kes Do not free a volume on a tape drive until another volume is
854 mounted and read, or the autochanger unloads the volume.
855 This should help the SD re-use volumes that are already mounted,
856 and should fix bug #886.
857 kes Apply patch from user brettedgar that allows gnome2-console include
858 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
859 kes Apply patch from Lucien Weller that fixes day of week calculation
860 because of DST flag problem. Fixes bug #887.
862 kes Move find_next_appendable_volume() to after acquiring a valid device
863 in reserve.c. This fixes bug #864 -- confirmed by reporter.
865 kes Unable to reproduce bug 872. However added additional testing for
867 kes Bug #874 resolved by documenting SQLite limitations.
868 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
869 kes Bug #881 resolved by removing typo in mtx-changer script.
870 kes Made Frank Sweetser's wiki the official Bacula wiki with his
871 approval. Added a link to the wiki on the web page, and implemented
872 a backup from http://paramount.ind.wpi.edu
874 kes Fix update allfrompool to pass pool name.
876 kes Convert to pure GPL v2 license.
877 kes Fix sscanf problems reported by Peter Buschman that caused
878 a bus error on Solaris.
879 kes Rework (simplify) the select prompt in bat.
880 kes Move get_jobid_from_tid() into lib and create a
882 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
883 should definitely fix the problem of lost error messages in the
885 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
886 kes Eliminate tcpd.h from the project. Enclose the #include from the
887 library with extern C ...
888 kes Add print of signal name when a signal is trapped.
892 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
894 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
895 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
896 makes SQLit3 run 30 times faster, though a bit less safe.
897 kes Implement --with-batch-insert in configure and detection of thread
898 safe libraries. It is on by default, but turned off if no thread
899 safe library (e.g. SQLite 2) is available.
901 kes Fix Bacula PostgreSQL buffer overruns.
902 kes Do better checking for NULL results returned from PostgreSQL;
903 implement retry for failed queries; clear results buffer after
904 failed query. Hopefully this will correct the PostgreSQL failures.
906 kes Implement algorithm to handle only one appendable volume with
907 Prefer Mounted Volumes = no.
908 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
909 returned from a query.
910 kes Make volume lock recursive.
911 kes Implement an additional volume reservation algorithm that
912 starts by considering all reserved volumes then uses the
913 old brute force algorithm of searching the resources to
914 find a suitable device.
915 kes Add new reservations debug code and refine the old code.
916 kes Update the win32/dll/bacula.defs file.
918 kes Tweak reservations algorithm to permit a few more cases, i.e.
919 volume reserved, but on different drive, ...
920 kes Enhance SD status to include Pool and Media Type for drive in a
921 more readable format (a bit longer).
922 kes Fix PostgreSQL double free.
924 kes Minor refactoring of restore decryption code.
925 kes Add code to smartall.c to detect double free of a buffer.
927 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
928 so that bsmtp will create a correct email address (mailbox only).
929 kes Modify 'memory' command so that the buffers are listed as 'In use'
930 to avoid confusion with Orphaned buffers.
931 kes I reworked the OpenSSL include/lib flags to be handled in
932 the standard Bacula way, which should fix bug #863 concerning
933 non-standard OpenSSL libraries.
935 kes Implement Help Browser window for bat.
936 kes Fix reload bug that reset StorageId to zero.
938 kes Fix TLS #ifdefing when TLS turned off.
939 kes Ensure that when labelling a tape with Slot=0 that InChanger
941 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
943 kes Add StartTime to final uar_sel_jobid_temp query so that we can
944 add DISTINCT (required by PostgreSQL).
945 kes Implement BSOCK authenticate_director() method. Eventually will
946 authenicate all daemons.
947 kes Move several more functions into the BSOCK class.
949 kes Add code to tell the OS that we no longer need a cached
950 file that we were reading. In findlib/bfile.c. Also,
951 only cache files that we are reading. Thanks to
952 Tobias Oetiker <tobi@oetiker.ch> for the idea.
953 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
954 kes Implement script to automatically generate cats and dll .def
956 kes Update README.mingw32 to include new .def file generation.
957 kes Correct typo in UTF-8 error message as reported by:
958 jhernandez <julianhernandez@gmail.com>
959 kes Add additional sm_check() code on debug level 1.
960 kes Set default debug level to 1.
961 kes Trap SIGABRT in attempt to get traceback.
963 kes Reduce bat connect timeout from 30 to 15 seconds.
964 kes More restructuring and implementing BSOCK class in place of
966 kes Remove a few unnecessary malloc() tests in crypto code.
967 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
968 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
969 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
971 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
973 kes Fix Verify InitCatalog. The attributes were not pointing to the
974 correct saved location.
975 kes Implement message callback so that GUI is sure to get all
976 daemon messages. Currently displayed in a dialog in bat.
977 kes Ignore SIGUSR2 (Bacula timer) in bat.
978 kes Apply regress patch from bug #859 to allow regress to work
979 with Solaris compiler.
981 kes Begin adding TLS support to bat.
982 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
983 clean up lex.c and make it more readable.
985 kes Move more bnet functions into the BSOCK class.
986 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
987 kes Complete change of berrno strerror() method to bstrerror()
991 kes Cleanup incorrect email addresses in bsmtp.
992 kes Make bat display initial messages rather than discard them.
994 kes First cut of adding .mod to the run command.
995 kes Implement auto display of messages in bat.
996 kes Enhanced preferences to allow all Bacula output to be
999 kes Try to make bsmtp date routines more generic.
1000 kes Fixed bug #856 autochanger documentation.
1001 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1002 kes Add new cats entry point so Win32 builds.
1004 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1006 kes Do better checking for the MySQL 64 bit libraries looking for both
1007 .a and .so libraries.
1008 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1009 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1010 kes Require the thread safe version of MySQL during configure. Thanks
1011 to Andre Noll for pointing this out.
1012 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1013 continuing in migration code.
1014 kes Apply implementation of tray-monitor font derived from gnome-console
1015 submitted by Andreas Piesk <a.piesk@gmx.net>
1017 kes Eliminate important memory loss in SQLite
1018 kes Fixed the batch insert MySQL thread specific data that was not
1019 being freed. See cats/mysql.c:db_thread_cleanup().
1020 kes Fix restore before command.
1021 kes Convert old hdr.name to name() in a few places.
1022 kes Implement update jobid command.
1023 kes Return all time_t dates in db_get_job_record()
1024 kes Stop watchdog in SD earlier.
1025 kes Put Pool just after Storage in please mount message.
1026 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1029 kes Update the po files.
1030 kes Fix Verify InitCatalog by making it cache attributes.
1032 kes Change name bacula-bat to bat for man 1 page to correspond to
1034 kes Check for client and store NULL pointers in status command. This
1036 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1037 kes Fix sign extended editing of %p.
1038 kes Clean out a little old #ifdefing in cats/mysql.c
1040 kes If time diff between DIR and FD is more than 600 seconds convert
1041 INFO message to WARNING.
1042 kes Implement heap size display in status for all daemons.
1043 kes Attempt to fix MySQL db open memory loss (not successfull).
1044 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1045 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1046 Query. This looks like a MySQL but but by doing extra releases,
1047 the memory goes away. This should fix bug #847.
1049 kes When backup fails, cancel SD before waiting for sd termination.
1050 kes If SD is waiting for FD to connect during cancel, wake up the
1052 kes Fix fsf code so that errno is correctly reported.
1053 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1055 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1056 so that Bacula doesn't later stumble into a seg fault.
1057 kes Use the term Restore Client in the restore Job report.
1058 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1059 the original job's FileSetId.
1060 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1061 spooling in migration jobs. Not yet tested.
1062 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1063 reading conf file from a pipe. However, do it with open_bpipe()
1064 rather than popen. Not yet tested.
1066 kes Fix an ugly bug where the VolCatBytes were getting updated
1068 kes Implement bconsole memory command that prints current memory
1069 usage, plus smartalloc dump.
1070 kes Clarify some error messages in backup, admin, and migrate.
1071 kes Shrink label dialog to smaller size.
1072 kes Invert Cancel OK buttons on restore to be OK Cancel.
1073 kes More strerror() to bstrerror() conversions.
1075 kes Start implementing bstrerror() in place of strerror().
1076 kes Stripping path -- seems to work.
1078 kes Prevent door and port files from being restored (mostly
1080 kes Free an unreleased buffer in compat code.
1081 kes Change console Job name from *Console* to -Console- to eliminate
1082 Win32 filename problems. Put Win32 path separator when creating
1083 Console file. This fixes bug #846.
1084 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1086 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1088 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1089 to force Win32 error message.
1091 kes First cut strip path. The data should be passed to the FD,
1092 but nothing is done with it yet.
1093 kes Enhance the digest and signature routines in the crypto
1094 library to accept a JCR and to use it to print error messages
1095 so that they will go in the Job report rather than the daemon's
1097 kes Simplify some of the verify signature code.
1098 kes Simplify a few of the alternative returns in the signature
1101 ebl Use only POSIX regex instead of GNU regex in breg.c for
1102 File relocation. It fix broken freebsd compilation.
1103 kes Convert all other Dir files to use new ua class message
1105 kes Tentative fix for missing digest signature in bug 807.
1106 kes Correct handle problem in new win32_ftruncate routine.
1107 kes Convert ua_purge.c and ua_update.c to use new ua class
1108 message routines for bat.
1110 kes Correct incorrect installation of LICENSE in Win32 installer.
1111 kes Display LICENSE at the beginning of the Win32 install.
1112 kes Attempt to correct the need for the png files to be installed
1114 kes Reapply my bat.conf install script in qt-console. I think I
1115 editted bat.pro instead of bat.pro.in and it was lost.
1116 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1117 the /var/lock/subsys for subsysdir. Also corrects typos in the
1120 kes First cut update job.
1121 kes Correct configure to include qmake of src/qt-console directory.
1123 kes Make restore job yes/mod/no print in one command so GUI works.
1124 kes First cut implementing backup and restore client.
1125 kes Correct editing in Verify output that caused a seg fault.
1127 kes Insure that bat.conf is not overwritten during installation.
1128 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1129 while I was implementing migration in March 2006 !
1131 ebl Cleanup file relocation, using char *RegexWhere instead of
1132 char *where + bool where_use_regexp
1133 kes Update some manpages and add bat manpage.
1134 kes Make a first cut at converting bacula.spec.in for bwx-console
1136 kes Apply patch from John Goerzen to add hostname as fourth argument
1137 to make_catalog_backup script.
1138 kes Fix typos I introduced into bsmtp.c
1139 kes Make pm_strxxx() routines handle input of NULL pointer. This
1140 is to protect from NULL pointers returned from SQL databases.
1141 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1142 kes Add more debug to FIFO code -- fix fifo regression test.
1144 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1145 kes Add thread timer to bnet_connect() to break from OS if wait time
1148 kes Update Win32 build to include new files, new symbols, and
1150 kes Implement socket level heartbeat (tcp_keepidle)
1151 ebl Commit File relocation patch
1152 kes Make bat have 'make install' target.
1153 kes Warn during install if old gnome-console binary found.
1154 kes Warn during install if old wx-console binary found.
1155 kes Add -8 option to bsmtp command line to add content type utf-8.
1156 Fixes bug #809. (Character coding problem in bsmtp).
1157 kes If < is found in target (from, to, cc) then do not enclose the
1158 target in < > in bsmtp. Fixes bug #772 (malformed address).
1159 kes When printing certain items in dbcheck, stop after 300000.
1160 Fixes bug #822. (dbcheck loops).
1161 kes Incorrect status in Dir after waiting for mount with poll set.
1164 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1166 kes Print waiting to reserve a device every 5 mins.
1168 kes Don't call close_part in label.c if tape and relabel.
1169 kes Don't free volume if busy in close() -- should help with
1171 ebl Fix #824 RunScript bug (After script could be execute twice)
1172 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1173 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1174 Add a regression script to test RunScript
1176 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1179 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1180 deprecated. No additional bugs will be fixed, and they will be dropped
1181 in a future release (probably 2.4.0).
1182 kes Change name of wx-console to bwx-console to make it more Bacula
1184 kes Change the name of gnome-console to bgnome-console to make it
1187 kes Some time in March, a Feature Request with patch from Jorj Bauer
1188 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1190 The ability for the director to validate a Client (FD) CN against
1191 an arbitrary set of patterns rather than the hostname, with
1192 A new 'TLS Allowed CN' set of directives which are implemented
1193 in the Client resource. Then pattern matching is used in place
1194 of hostname matching against the Certificate's CN. As an example, we
1195 have certificates which (a) use a local CA, and (b) have a CN of the
1197 kes Add new/changed entry points to Win32 build
1198 kes Create unaccepted-projects for projects that are not accepted.
1199 kes Simplify locking in the reservations system.
1200 kes Add more debug code in reservations.
1201 kes Make sure error condition on reserving a volume is handled correctly.
1202 kes Correct handling of volume_in_use.
1203 kes Correct handling of initializing a device.
1204 kes Move handling of broadcasting releasing a device into release_device().
1205 kes Correct attaching dcr to dev so that it is only done if device
1206 is properly initiated.
1208 kes Locking debug level tweaks in SD.
1209 kes Tweak new Volume code.
1211 kes Add exec external-command [wait-seconds] to bconsole. This
1212 executes the external-command. Note! normally external-command
1213 should be enclosed in double quotes.
1214 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1215 it should normally be off in a production system.
1217 kes Implement die command for SD so that we can force it to dump.
1218 kes Implement SD lock debug code.
1219 kes Implement new algorithm for keeping Volume list in SD. It
1220 is now owned by the device.
1222 kes Implement new code for freeing in use volumes that should
1223 resolve if not all, some of the problems of multiple drive
1224 tape conflicts described in bug 801.
1226 kes Fix gui/bacula-web/images files in svn.
1227 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1229 ebl Fix a bug in batch mode (in string escape)
1230 kes Correct migration prune SQL typo that crept in in a
1231 recent 2.1.x change.
1233 kes Move bnet_despool() into class in bsock.c
1234 kes Modify job report to include director name and Build OS.
1235 kes Move drop root privilege and check_catalog() before fork.
1236 kes Add update database scripts (version 9 to 10) to updatedb directory.
1238 ebl Check size and age of each file after its backup to see if
1239 it has changed during backup, if 'checkfilechanges' is set.
1240 The FD will do an extra check (stat(2)) after
1241 each file backup. mtime, ctime and size are compared with
1242 'before backup' information. If time or size mismatch, an
1243 error message will be generated. You must upgrade FD to use it.
1245 kes Make database name and user configurable
1246 --with-db-name=xxx --with-db-user=xxx
1247 kes Add back database type to message.c for debugging.
1249 kes Implement dir_sql() which issues an SQL query.
1250 kes Modify bat medialist to use dir_sql() and do some minor C++
1251 formatting as well as eliminating a number of pointers, simplifing
1254 kes Fix some of the mtx-changer grep commands for tape label readers.
1255 kes Convert a number of bsendmsg into the appropriate send/warning/error
1256 message class calls.
1257 kes Suppress the using database message in the .sql command.
1258 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1260 kes Add context menu for floating a window.
1261 kes Some minor cleanup and name changes in qt-console
1262 kes Add doing mt setblk 0 in Win32 mtx-changer.
1263 kes Apply Martin's bug fix to move definition of ENODATA for
1265 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1266 sqlite2 and sqlite3.
1268 kes More pruning cleanup.
1269 kes Turn on wait_for_drive by default in mtx-changer.
1270 kes Turn on Batch insert code by default as it now passes regression.
1271 kes Add ./configure --enable-bat to enable building of Bat.
1272 No install yet though.
1274 kes Implement a new .sql command for bat.
1275 kes Implement code to turn off pruning in obtaining the next volume.
1276 Pruning is turned off for the status dir command, but turned on
1277 for SD requests and for the list nextvolume command.
1279 kes Correct Qmsg() that was not updated correctly when committing a
1280 previous change (probably the recent TLS patch).
1282 kes Write new subroutine is_volume_purged() that explicitly checks
1283 if the Volume is purged, and if so marks it as such. This should
1284 resolve problems reported about needing to mount twice to recycle
1286 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1287 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1288 amount of duplicated code.
1289 kes Do volume pruning only for the Media Type desired (reduces pruning time
1290 if multiple Media Types are in the same pool).
1291 kes Implement more detailed info in the Job report for the Bacula version
1293 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1295 ebl Add bbatch tool to bench database and insert mode.
1296 Fix sql quote stuff in batch mode
1297 Fix sql stuff for mysql
1299 kes Correct problems with am/pm scheduling. Fixes bug #808.
1300 kes Implement new prunning code that prunes up to 1000 jobs at
1301 the same time. The same technique can be applied to a number
1302 of other prune/purge subroutines.
1303 kes Add an insanity check when starting a new tape job to ensure
1304 that the tape position has not been changed. If so fail the
1306 kes Fix Win32 build for dlls to add the folllowing:
1307 src/lib/bsock.c -- new file with new entry points
1308 src/lib/dlist.c -- new entry points
1309 src/cats/sql_create.c -- new entry point
1310 src/cats/sql_cmds.c -- new DATA item exported
1312 ebl batch mode cleanup bscan-test is ok now.
1313 kes Implement SD code to check length of disk volume before appending.
1315 kes Correct return status on db_batch... routines.
1316 kes Add call to db_write_batch_file_records() to migration code.
1317 ebl Fix AfterJob timing
1318 kes Move the checking of the database in initializion of the Director
1319 to after we drop privileges. This avoids the need for both root
1320 and bacula access to the DB.
1321 kes Correct a misplaced variable definition in src/filed/backup.c
1322 kes Correct how the new batch insert db_create_attributes_record()
1323 uses the arguments. Caused a seg fault in bscan.
1324 kes Implement lock() and unlock() methods in DEVICE class.
1325 Implement block() and set_block(xx) methods in DEVICE class.
1326 kes Modify bnet_connect() so that it uses time() to check for the
1327 wait time expiring (on some OSes, some system calls may not
1328 return immediately).
1329 kes Modify Verify to obtain the previous JobId when it is actually
1330 running rather than at schedule time (as it was in 1.38.x).
1331 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1333 kes When checking pid in pid file, continue running if the pid is
1334 the same as ours. This occurs on IRIX after a system crash.
1337 kes Extend new GUI API.
1338 kes Make the ua structure a class, and implement send_msg(),
1339 error_msg(), warning_msg(), and info_msg().
1341 kes Apply fix from for building wx-console on the Mac from
1343 kes Implement new select mechanism for GUI programs.
1344 kes Reorganize initialization of stackedWidgets in bat.
1346 kes Add updated nagios plugin supplied by Christian Masopust.
1348 kes More bat implementation.
1349 kes File migrate bug with Pool Occupancy using mediaid instead
1350 of jobids. Fixes bug #795.
1351 kes Fix orphaned buffers in filed backup and verify due to
1352 crypto buffers not freed during errors. Fixes bug #789.
1353 kes Extend new GUI api code to tree commands.
1354 kes Ensure that tree and dot commands check console ACLs.
1355 kes Permit marking directory with trailing slash.
1356 kes Allow 20 console connections (instead of only 10).
1358 kes Add smartctl call to bacula-sd.conf as an example of getting
1361 kes Modify jobq.c to let simultaneous restore jobs run. This may
1362 cause them to fail if they cannot get a drive.
1363 kes Add Client Connect Wait to Storage daemon to permit users to
1364 modify the time the SD waits for a FD connection.
1366 kes Correct virtual changer check which was backwards. This caused
1367 volumes to be unloaded into slots already occupied.
1369 kes Apply Command ACL filter to JobId list in restore command.
1370 kes Correct typeo in var.c patch.
1372 kes Don't let Bacula prune File or Job records for the current Job.
1373 kes Fix variable substitution pad + inc bug reported (with patch)
1376 kes Correct SQLite log table index as reported by Luca Berra.
1378 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1380 kes Begin implementing new comm signals for API.
1381 kes Fix a few places in lib/message.c where the open fd may
1383 kes Continue implementing lib/bsock.c (real class). Make jcr,
1384 who, host, and port private. There are new methods to access
1385 them for non-class use. This required touching a number of files.
1387 kes Add LANG=C to autoconf/randpass so it works with languages other
1388 than English. Fixes bug #788.
1390 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1392 You will not be able to generate Include/Exclude list any more.
1393 It will be fixed soon.
1394 If you want to use this, you can apply
1395 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1397 kes Restore of sockets created false error messages because Bacula
1398 no longer restores sockets, but the code was still trying to
1399 set the attributes on a non-existent file. Reported by a user.
1400 ebl finish RecyclePool feature
1401 Media will takes Pool.RecyclePool
1402 when moving from Scratch to a Pool or when user will do
1403 update volume=xxx frompool
1404 To use it, add RecyclePool = aPool to your Pool resource
1407 RecyclePool = Scratch
1411 kes Expand new BSOCK class adding signal() and new BNET signals.
1412 kes Begin enhancing the dot commands adding a new API function
1413 that returns more information and will make it easier
1414 to interface to the Director from a program.
1416 kes Make DEVICE fd private. Its new name is m_fd, and can be
1417 obtained with dev->fd() outside the class. This is the
1418 first of many DEVICE members to be made private.
1419 kes Implement Michael Renner's idea on having a virtual disk
1420 changer. I made some minor modifications (e.g. I did not
1421 implement the Virtual Changer directive, but simply set
1422 the Changer Command to an empty string.
1424 kes Implement a BSOCK send() method that writes the whole record
1425 in a single write() request rather than in two.
1426 ebl add update volume=xxx recyclepool=yyyy
1427 volume takes recyclepool from pool when using update volume=xxx from pool
1429 kes Fix encryption deblocking bug, which caused some restored files
1430 to be truncated. This fixes bug #763.
1431 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1432 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1434 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1435 ebl Use btime_t instead of uint64_t in media patch.
1437 kes Optimize the use of the database a bit in the Status dir command.
1438 Only open it when needed, ensure that if any previous database
1439 was opened, it is closed.
1441 kes Correct VolCatBytes bug from media patch.
1442 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1443 in the case of orphaned records.
1444 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1445 and File records in 300K chunks to be more efficient. This
1446 idea came from Juan Luis Frances (if I remember right).
1447 kes Apply Eric's scratch patch that moves a purged Volume to
1448 the RecyclePool. Question: how is RecyclePool set? what
1449 happens to the ScratchPool?
1450 kes Apply Eric's media patch that collects read/write media
1451 times as well as byte counts. This patch requires a
1452 simultaneous upgrade of the DIR and SD. Note, there
1453 should be some way to turn off timing. I'm not sure
1454 times are in Bacula units.
1455 kes Apply Eric's batch-insert patch.
1457 kes Update projects list.
1459 kes Implement Include/Exclude file lists in FD as dlists using
1460 the new dlistString class. This permits efficiently having
1461 large include/exclude lists and completes project Item 25.
1462 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1463 console is authorized to cancel the job. This fixes bug
1465 kes Modify SD so that the VolCatJobs medium record is updated
1466 at the beginning of a Job rather than the end. This
1467 fixes bug #775 where exceeding MaxVolJobs caused jobs
1469 kes Added a mutex around getting and setting Volume information
1470 so that multiple simultaneous jobs will single thread.
1472 Switch to using Subversion
1473 kes Remove src/pygtk-console/ from configure
1475 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1476 plus the entrypoints.
1477 kes Apply patch supplied that corrects debug print
1478 in canceling jobs for max run time. Supplied as
1479 part of bug #621, which was previously fixed.
1481 kes Test on job_canceled() and sd_msg_thread_done inside
1482 loop starting the message thread to avoid a race condition.
1484 kes Remove rl_catch_signal from console.c as it conflicted
1485 with the header definition. Fixes bug #765.
1486 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1488 kes Clarify some stored/acquire messages to indicate if the
1489 problem is with read or append.
1491 kes Fix memory leak with storage ids in cats/sql_get.c
1492 kes Terminate watchdog earlier to avoid reference to released
1493 memory -- reported by Jason Austin.
1494 kes Move closing the database from jobq.c to the director daemon
1495 termination routine. This fixes memory leaks for shadow jobs
1496 (i.e. migration jobs).
1497 kes Free up the unique jobid chain items in migrate.c. This fixes
1498 a memory leak problem.
1499 kes Convert some ugly looking for statements to use foreach_alist
1500 in findlib/find.c. This will facilitate converting the structures
1501 to use dlist (for large include/exclude lists).
1502 kes Fix a bug in the btree.c and btree.h routines, then rename them
1503 rblist and add them to be built in src/lib. Include some new
1504 methods written by Rudolf Cejka that make the code more readable
1505 (hides some of the ugly casting).
1506 kes Add set_next() and set_prev() methods which make the code much more
1507 readable. Also add a new dlistString class that facilitates storing
1508 strings in dlists. To be used in the large include/exclude lists.
1509 kes Make some trivial modifications to lib/tree.h that use rblist
1510 rather than dlist for storing the tree links. This was suggested
1511 by Rudolf Cejka. The result of this is that the restore tree now
1512 uses red-black binary trees rather than simple linked lists. This
1513 should give rather dramatic speed improvements for directories
1514 contining large numbers of directories/files (more than 10000).
1516 kes Fix maxruntime bug #621.
1518 ebl Implement the include JobID in spool file name project.
1519 kes Reorder projects file in order determined by Jan 2007 vote.
1520 kes Implement item #12 on project list -- quick release of FD by
1522 kes Fix open of SQLite3 db where user does not have write permission
1523 so that DIR does not crash. Fixes bug #761.
1525 kes Add back missing @ in Win32 Makefile.
1526 kes Change 'Device not configured to autolabel' from INFO
1528 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1529 which should restart an indefinite # of times.
1530 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1531 other DIR specifications.
1533 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1534 Fix path quoting in SQLite scripts.
1535 Fix problems with SHGetFolderPath.
1537 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1539 kes Fix Job restart on error bug that promotes an Inc to a Full
1540 backup. This should fix bug #755.
1541 kes Add qt-console and first cut of code.
1545 kes Fix Bacula->Documentation link on Win32 to point to index.html
1546 instead of bacula.html. Fixed bug #750.
1547 kes Return JobId in db_get_job_record() when JobId==0. This should
1549 kes Do not release source pointers when restarting a failed job.
1551 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1552 This *should* fix bug #747.
1553 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1556 kes Modify USTORE constructor to set an empty store_source string,
1557 and don't copy the store_source string in a cancel. Hopefully
1558 this will fix Arno's seg fault, bug #744.
1559 kes Add back code to disable conio in configure. Fixes bug #743.
1560 kes Correct the Options scanner in the FD to correctly handle
1561 SHA1 option, which was eating the next option. Reported by
1563 kes Add code to indicate when the SD is spooling, spool wait, and
1564 despooling as requested by Alan Brown.
1566 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob