1 Technical notes on version 2.3
5 ebl Add history support to bconsole when using readline.
6 Using Ctrl-D to exit doesn't update .bconsole_history
7 kes Modify new volume algorithm to use max MediaId for generating next
8 volume number rather than the count of Volumes. This should essentially
9 eliminate the failure rate if some volumes were deleted. Bug #921.
10 kes Begin implemention of Optimize Job Scheduling.
11 kes Implement restore callback that Dirk and I agreed on for bat
12 restore. This fixes bug #928. Restore of backup of zero files fails.
13 kes Fix SQL Catalog logging which broke with new db_escape_string
16 kes Fix bacula_cats.def for new db_escape_string().
17 kes Increase size of name string when FD making connection to SD.
18 May fix bug #953. FD->SD connection failure.
20 kes Add code to help Dan debug 2drive-incremental-2disk test.
21 kes Add code to try to fix bug #908.
22 kes Add waits to multiple exit detection code to try to force pid
23 file to always be deleted.
24 kes Restore good dev.tar.gz to rescue set appropriate binary property.
26 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
27 trying to switch drives by checking for blocking before unblocking.
29 kes Cancel storage daemon in all cases where FD reports error. This
30 should fix virtually all cases of bug #920.
31 kes Fix db_escape_string() for MySQL which did not compile.
33 kes Fix error message that was clobbered when Dir tells SD it does not
34 have write permission on Volume. This should fix a minor point
35 in bug #942, but not the main problem.
36 kes Add code to cancel job in SD if FD connection fails. This should
38 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
39 dvl Pass jcr and db into db_escape_string() to enable better escaping
41 kes Fix migration code to get correct Volume name with multiple volumes
42 by skipping |. Fixes bug #936.
43 kes Implement patch supplied by Landon to fix bug #944 where using
44 TLS with bconsole uses 99+% of the CPU.
45 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
47 kes Move patches into patches directory.
49 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
52 ebl Using "m" in bconsole will show messages like before,
54 kes Fix bug #935, and probably also bug #903 where files were not
55 restored. MediaId was not properly set in JobMedia record after
58 kes Suppress chown and chmod error messages if the FD is not running
61 kes Apply Martin Simmons' patch that should turn off the new API usage
62 when batch insert is turned off allowing building on older
64 kes Add ./configure search in qwt-qt4 for qwt package
66 kes Bacula is now free of 3rd party GPL copyrighted code!
68 kes Add guid_to_name.c/h which replace idcache.
69 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
71 ebl Detect if new PosgreSQL batch insert API is present.
72 kes Correct incorrect mempool call causing Director crash. Occurs on
73 systems without va_copy().
74 sb Update spec files for 2.2.1 release
76 kes Fix memory pool call in ua_output.c. bug #934.
77 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
78 Add test program to fnmatch.c
80 kes Integrate patch to README.vc8 from
81 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
82 edit it to get it into Unix patch format.
83 kes Implement mkpath.c to replace old FSF makepath.c
85 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
89 kes Update POTFILES.in
90 kes Cleanup a few underquoted AC_DEFUNs in configure
91 kes Apply patch from Martin Simmons that adds a test for va_copy to
94 kes Fix bug #921 by increasing the number of tries to create a new volume
96 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
97 can be called multiple times. Implement a version for machines
98 without va_copy() that gets a big buffer.
100 kes Integrate more portable zone offset code into bsmtp.c
101 Submitted by Attila Fülöp.
103 kes Fix bad SD->FD return status reported by
104 (James Harper) <james.harper@bendigoit.com.au>
105 ebl Fix a bug in read_close_session which return random status
106 thanks to James Harper
108 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
109 and directory names during restore of single file/directories.
110 kes Add sanity checks to .sql command when string is empty. Hopefully
111 that will resolve Dirks Director crash.
113 kes Apply patch submitted by Martin Simmons that corrects a seg fault
114 in the bsmtp chat subroutine when debug is >= 10.
116 kes Fix Director crash when running bat SQL queries.
117 kes Add David's notes on Item 8: Copy pools.
119 kes Rework projects file to be current and ready for a vote.
120 kes Enhance lex scanner error message.
122 kes Tweak LICENSE file to mention BSD code.
123 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
124 if specified on the ./configure.
125 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
126 This class is intended to allow us to open a second bsock to the
127 Director while in the restore subdialog.
129 kes Fix configure to create bat Makefile before creating dependencies.
130 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
131 kes Add a tooltip to the tray monitor.
132 dvl Set the Director's PID file before dropping privs. This fixes
135 kes Update AUTHORs file
136 kes Increase the default max concurrent jobs to 20 in FD and SD to
137 correspond with the default .conf files.
138 kes Rewrite the Win32 service routines. This eliminates the 3 copies
139 some different, of the same file created by RN when porting the
141 kes Rearrange some of the Win32 directories and the placement of the files
143 kes Set DEVELOPER flag in version.h
145 ========================================================================
146 Release Version 2.2.0
148 kes Apply a second doc patch from Marc.
149 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
150 improves the tips section that discusses how to setup multiple
153 kes Update bat README file.
154 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
155 corrects a typo in the Recycle status check in db_find_next_volume().
156 This will probably fix a number of annoying problems with multiple
158 kes Modify most of dird/msgchan.c to use bsock class calls rather than
159 bnet calls -- no functionality change.
161 kes Modify the Verify output to specify if files are missing on
162 the Volume(s) or disk. Fixes confusion in bug #916.
163 kes When more than one Volume is read in a migration job, the last
164 Volume bytes reported are from the last read volume rather than
165 the last written volume. Fixed. This fixes bug #910.
166 kes Fix display of Recycle flag after update volume=foo recycle=yes.
167 It previously printed New Recyle flag is: no. This fixes bug
170 kes Correct seg fault when switching tape drives during restore.
171 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
172 be used until after 2.2.0 release.
174 kes Remove fnmatch() in SD that permitted wild card specifications.
177 kes Fix %g in filename returned by SQL for browse tree reported by
179 kes Fix configure so that it puts config.out in the cwd rather than
181 kes Attempt to fix the locking problem reported by Eric in bug #906.
182 kes Make berrno class to leave errno unchanged after constructor call.
183 kes Make bnet_server use the heap rather than the stack to allocate
184 its socket fd pointers to avoid a crash at termination. Problem
185 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
187 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
188 and putting it in depkgs-qt along with Qt4.3.
190 kes Rework code in acquire.c that switches drives for reading when
191 the Media Type does not match. This should fix bug #906
193 ebl Fix a director segfault during job setup #907
194 kes Correct seg fault in postgresql when first operation returns no
195 rows. Fixes Dirks File browser problem seg fault with bat.
197 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
198 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
201 kes Implement PopUp YES/NO dialog for bat.
203 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
205 kes Correct RunScript to terminate job in FD on failure.
206 kes Change abort_on_error and AbortJobOnError to fail_on_error
207 and FailJobOnError in RunScripts.
208 kes Minor tweaks of code formating in RunScripts, principally to
209 avoid depassing 80 columns.
211 kes Eliminate one #ifdef Win32 in bsmtp
212 kes Implement grow tool to grow a file for testing very large databases.
213 kes Add big-vol-test to test Bacula seeking with > 5GB.
216 kes Modify find_next_volume() to return all values in Media record.
217 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
221 kes Update Release notes
223 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
224 Warning, in previous beta version, all media get from scratch keep their
227 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
228 This should fix bug #842. Made a note to look at removing the temp
229 files at the end of the install.
230 kes Add ability to mount and unmount a file device providing it is
231 marked as being removable and has the appropriate mount and unmount
232 commands defined in the Device resource. This fixes bug #830.
233 kes When applying a storage override, release all previous storage
234 definitions rather than just prepending the new storage.
235 This should prevent a good deal of confusion.
237 kes Implement ./configure search for qwt libraries.
239 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
240 Win32 FD. This should fix bug #893.
241 kes Remove an unnecessary beep in Win32 init code.
242 kes Update copyright dates in Win32 executable about boxes.
243 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
244 code with a BSD getopt.c and getopt.h.
245 kes Remove sched.h from the Win32 compat directory -- not used.
246 kes Remove the Exit menu item from the Win32 tray monitor. If you really
247 need to shut it down, do it through the services panel or the command
249 kes Remove some inappropriate Bacula FSFE copyrights.
250 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
251 kes Fix regress config non-portable test as pointed out by
252 Florian Heigl <florian.heigl@gmail.com>
253 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
254 as pointed out by Florian Heigl <florian.heigl@gmail.com>
256 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
257 Reported by Frank Sweetser.
261 kes Fix client-only build.
262 kes Integrate client-only fixes for bsys (initgroups) and conio from
263 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
264 kes Make arguments to get_scratch_volume() in same order as other
266 kes Rework the prune_volumes() subroutine so that after purging and
267 no volume found in desired pool, it will check for a scratch
268 volume. This prevents recycling the whole scratch pool.
269 kes Add code to status storage to print boffset_t (largefile support).
271 kes Move qwt (Graphics libarary for Qt4) to depkgs.
272 kes You now need a --with-qwt=<dir> to be able to build bat.
273 kes Update src/win32/cats/bacula_cats.def to include the new
274 db_get_query_dbids() call on Win32.
276 kes Correct a problem when selecting a scratch volume and moving
277 it to another pool that lost some columns.
278 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
279 kes Enhance Autochanger error messages to include Volume and device name.
280 kes Rework prune_volumes() code to take account of InChanger flag,
281 and to handle recycling volumes going to the Scratch pool and
282 current pool because the RecyclePool directive.
283 kes Implement a better and more efficient db_get_query_dbids() to
284 handle creating and passing back a list of DBIds.
288 kes Start work on new more efficient DBId subroutine. First use
289 will be for recycling volume to Scratch inchanger.
290 kes Increase number of JobIds in pruning from 1000 to 10000.
291 This to be replaced by above routine.
292 kes Begin implementation of building Qt4 on Win32.
293 kes Correct typo in fix I added for bad TLS shutdown.
294 kes Pull 2.0.3 patches into patches directory.
295 kes Update Release notes. Include qt-console in line count.
296 kes Update Projects file.
298 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
299 bug in migration code where a job that spanned two volumes
302 kes Implement new BST_DESPOOLING blocked state. Change from locking
303 during despooling in SD to blocking. This means that other threads
304 can work with the device structure, in particular the reservations
305 system while despooling.
307 kes Fix return in reservation message queue that missed clearing
308 the jcr lock (implemented 26Jun07 below).
309 kes Rename a number of dev methods to make locking function names
311 kes Document locking in lock.c. Move lock structures to new file
314 kes Move reservations message lock to lock jcr only this
316 kes Move main SD locking code into lock.c (new file).
317 kes Update Win32 build to include lock.c
321 kes Dirk committed the qwt library code for drawing graphs in bat.
322 kes Tweak install of qwt so that it is integrated with ./configure.
324 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
325 out by Eric (my typo).
326 ebl Fix configure.in to get batch mode enable
327 kes Return correct string from authenticate.cpp in bat when connecting
329 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
330 spurious line drops when using TLS.
331 kes Do not file reparse points when restoring a file that already
334 kes Implement Windows reparse points -- similar to directories, but
335 we do not descend into it. This is a first cut. They seem to
336 be backed up, but restore is not yet tested.
337 kes Remove restore_blocking in tls code when shutting a socket to leave
338 it in blocking mode. Hopefully this will fix the encryption bug
339 reported by Frank Sweetser.
340 kes When opening a file for backup, tell the OS that we are going to
341 read it sequentially -- optimization.
342 kes Change variable names in authenticate_director() to not conflict
343 with member names in bat. Caused great confusion with compiler,
346 kes Queue openssl error messages in case of comm problem.
347 kes Do shutdown() call if socket terminated.
348 kes Remove some duplicated code in tls.c
349 kes Move more of the bsock member variables into private and access
351 kes Add Frank Sweetser's tls-test to the regression suite.
353 kes Add Swedish sv.po file
355 kes Don't print clock skew message in FD if less than 3 seconds diff.
356 kes Add a bit of VSS info to status client.
357 kes Implement a first cut of Vista VSS, using Win2003 code.
361 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
362 loaded tape but uses first drive).
363 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
364 This was indeed a Win32 issue.
366 kes Simplify search of autochanger for in-use Volume.
367 kes Fix exit condition of check for in-use volume. kes Remove
368 inappropriate my_postgresql_free_result() in db_close()
370 kes Fix bad return in FD when encryption signature not found.
371 Probably caused a crash.
372 kes Inhibit missing encryption signature error messages for
373 file types where no signature computed.
374 kes Correct inverted check on autochanger in reservation system.
375 kes Tweak debug code in autochanger reservation.
377 kes Add some additional locking in the cats directory in subroutines
378 that modify packet variables called from batch insert.
379 kes Rework how dcrs are allocated. new_dcr() can now be called
380 with an existing pointer, and it will simply clean it up.
381 This allows the reservation system to test various different
382 devices, and will permit easy device changes.
383 kes A bunch of changes all over to handle new new_dcr() calling
385 kes Work more on the Volume management in the SD. Remember Volumes
386 for tape drives and for autochangers (even virtual disk changers).
387 kes When looking at the Volume list to reserve a drive, handle
388 autochanger names correctly by interating through the changer
389 devices. Also call the Director to see if a Volume is suitable
391 kes Fix some bugs in bscan. Make sure all media records are written.
392 Make sure that valid JobMedia records are written for disk files.
393 Previously they were completely wrong.
394 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
395 that the URLs don't change and so that the developers will all
396 work off the same copy. Rebuild from scrach.
397 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
401 kes Fix seg fault in FD from incorrect digest size.
402 kes Fix argument to non-OpenSSL crypto.c subroutine.
406 kes Remove a few malloc()s from the encryption code.
407 kes Use the class calls to bsock in filed/backup.c and restore.c in
408 place of the old bnet_xxx code.
409 kes Implement code that does an on the fly calculation of the
410 signing digest during restore of encrypted files. It makes
411 a best guess at the algorithm, and if it is not correct, will
412 then revert to the old code which reads the file after it is
414 kes Implement at least one missing crypto stream in stream_to_ascii()
415 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
416 #877 where a reload with bad syntax causes Dir to exit.
418 Cut: 2.1.14 beta (not released)
420 kes Do not free a volume on a tape drive until another volume is
421 mounted and read, or the autochanger unloads the volume.
422 This should help the SD re-use volumes that are already mounted,
423 and should fix bug #886.
424 kes Apply patch from user brettedgar that allows gnome2-console include
425 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
426 kes Apply patch from Lucien Weller that fixes day of week calculation
427 because of DST flag problem. Fixes bug #887.
429 kes Move find_next_appendable_volume() to after acquiring a valid device
430 in reserve.c. This fixes bug #864 -- confirmed by reporter.
432 kes Unable to reproduce bug 872. However added additional testing for
434 kes Bug #874 resolved by documenting SQLite limitations.
435 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
436 kes Bug #881 resolved by removing typo in mtx-changer script.
437 kes Made Frank Sweetser's wiki the official Bacula wiki with his
438 approval. Added a link to the wiki on the web page, and implemented
439 a backup from http://paramount.ind.wpi.edu
441 kes Fix update allfrompool to pass pool name.
443 kes Convert to pure GPL v2 license.
444 kes Fix sscanf problems reported by Peter Buschman that caused
445 a bus error on Solaris.
446 kes Rework (simplify) the select prompt in bat.
447 kes Move get_jobid_from_tid() into lib and create a
449 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
450 should definitely fix the problem of lost error messages in the
452 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
453 kes Eliminate tcpd.h from the project. Enclose the #include from the
454 library with extern C ...
455 kes Add print of signal name when a signal is trapped.
459 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
461 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
462 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
463 makes SQLit3 run 30 times faster, though a bit less safe.
464 kes Implement --with-batch-insert in configure and detection of thread
465 safe libraries. It is on by default, but turned off if no thread
466 safe library (e.g. SQLite 2) is available.
468 kes Fix Bacula PostgreSQL buffer overruns.
469 kes Do better checking for NULL results returned from PostgreSQL;
470 implement retry for failed queries; clear results buffer after
471 failed query. Hopefully this will correct the PostgreSQL failures.
473 kes Implement algorithm to handle only one appendable volume with
474 Prefer Mounted Volumes = no.
475 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
476 returned from a query.
477 kes Make volume lock recursive.
478 kes Implement an additional volume reservation algorithm that
479 starts by considering all reserved volumes then uses the
480 old brute force algorithm of searching the resources to
481 find a suitable device.
482 kes Add new reservations debug code and refine the old code.
483 kes Update the win32/dll/bacula.defs file.
485 kes Tweak reservations algorithm to permit a few more cases, i.e.
486 volume reserved, but on different drive, ...
487 kes Enhance SD status to include Pool and Media Type for drive in a
488 more readable format (a bit longer).
489 kes Fix PostgreSQL double free.
491 kes Minor refactoring of restore decryption code.
492 kes Add code to smartall.c to detect double free of a buffer.
494 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
495 so that bsmtp will create a correct email address (mailbox only).
496 kes Modify 'memory' command so that the buffers are listed as 'In use'
497 to avoid confusion with Orphaned buffers.
498 kes I reworked the OpenSSL include/lib flags to be handled in
499 the standard Bacula way, which should fix bug #863 concerning
500 non-standard OpenSSL libraries.
502 kes Implement Help Browser window for bat.
503 kes Fix reload bug that reset StorageId to zero.
505 kes Fix TLS #ifdefing when TLS turned off.
506 kes Ensure that when labelling a tape with Slot=0 that InChanger
508 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
510 kes Add StartTime to final uar_sel_jobid_temp query so that we can
511 add DISTINCT (required by PostgreSQL).
512 kes Implement BSOCK authenticate_director() method. Eventually will
513 authenicate all daemons.
514 kes Move several more functions into the BSOCK class.
516 kes Add code to tell the OS that we no longer need a cached
517 file that we were reading. In findlib/bfile.c. Also,
518 only cache files that we are reading. Thanks to
519 Tobias Oetiker <tobi@oetiker.ch> for the idea.
520 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
521 kes Implement script to automatically generate cats and dll .def
523 kes Update README.mingw32 to include new .def file generation.
524 kes Correct typo in UTF-8 error message as reported by:
525 jhernandez <julianhernandez@gmail.com>
526 kes Add additional sm_check() code on debug level 1.
527 kes Set default debug level to 1.
528 kes Trap SIGABRT in attempt to get traceback.
530 kes Reduce bat connect timeout from 30 to 15 seconds.
531 kes More restructuring and implementing BSOCK class in place of
533 kes Remove a few unnecessary malloc() tests in crypto code.
534 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
535 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
536 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
538 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
540 kes Fix Verify InitCatalog. The attributes were not pointing to the
541 correct saved location.
542 kes Implement message callback so that GUI is sure to get all
543 daemon messages. Currently displayed in a dialog in bat.
544 kes Ignore SIGUSR2 (Bacula timer) in bat.
545 kes Apply regress patch from bug #859 to allow regress to work
546 with Solaris compiler.
548 kes Begin adding TLS support to bat.
549 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
550 clean up lex.c and make it more readable.
552 kes Move more bnet functions into the BSOCK class.
553 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
554 kes Complete change of berrno strerror() method to bstrerror()
558 kes Cleanup incorrect email addresses in bsmtp.
559 kes Make bat display initial messages rather than discard them.
561 kes First cut of adding .mod to the run command.
562 kes Implement auto display of messages in bat.
563 kes Enhanced preferences to allow all Bacula output to be
566 kes Try to make bsmtp date routines more generic.
567 kes Fixed bug #856 autochanger documentation.
568 kes Rework bsmtp date editing for Win32. This fixes bug #854.
569 kes Add new cats entry point so Win32 builds.
571 kes Attempt to fix bsmtp date editing on OSes without %z editing.
573 kes Do better checking for the MySQL 64 bit libraries looking for both
574 .a and .so libraries.
575 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
576 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
577 kes Require the thread safe version of MySQL during configure. Thanks
578 to Andre Noll for pointing this out.
579 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
580 continuing in migration code.
581 kes Apply implementation of tray-monitor font derived from gnome-console
582 submitted by Andreas Piesk <a.piesk@gmx.net>
584 kes Eliminate important memory loss in SQLite
585 kes Fixed the batch insert MySQL thread specific data that was not
586 being freed. See cats/mysql.c:db_thread_cleanup().
587 kes Fix restore before command.
588 kes Convert old hdr.name to name() in a few places.
589 kes Implement update jobid command.
590 kes Return all time_t dates in db_get_job_record()
591 kes Stop watchdog in SD earlier.
592 kes Put Pool just after Storage in please mount message.
593 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
596 kes Update the po files.
597 kes Fix Verify InitCatalog by making it cache attributes.
599 kes Change name bacula-bat to bat for man 1 page to correspond to
601 kes Check for client and store NULL pointers in status command. This
603 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
604 kes Fix sign extended editing of %p.
605 kes Clean out a little old #ifdefing in cats/mysql.c
607 kes If time diff between DIR and FD is more than 600 seconds convert
608 INFO message to WARNING.
609 kes Implement heap size display in status for all daemons.
610 kes Attempt to fix MySQL db open memory loss (not successfull).
611 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
612 kes Eliminate memory loss in MySQL (possibly other SQLs) during
613 Query. This looks like a MySQL but but by doing extra releases,
614 the memory goes away. This should fix bug #847.
616 kes When backup fails, cancel SD before waiting for sd termination.
617 kes If SD is waiting for FD to connect during cancel, wake up the
619 kes Fix fsf code so that errno is correctly reported.
620 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
622 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
623 so that Bacula doesn't later stumble into a seg fault.
624 kes Use the term Restore Client in the restore Job report.
625 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
626 the original job's FileSetId.
627 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
628 spooling in migration jobs. Not yet tested.
629 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
630 reading conf file from a pipe. However, do it with open_bpipe()
631 rather than popen. Not yet tested.
633 kes Fix an ugly bug where the VolCatBytes were getting updated
635 kes Implement bconsole memory command that prints current memory
636 usage, plus smartalloc dump.
637 kes Clarify some error messages in backup, admin, and migrate.
638 kes Shrink label dialog to smaller size.
639 kes Invert Cancel OK buttons on restore to be OK Cancel.
640 kes More strerror() to bstrerror() conversions.
642 kes Start implementing bstrerror() in place of strerror().
643 kes Stripping path -- seems to work.
645 kes Prevent door and port files from being restored (mostly
647 kes Free an unreleased buffer in compat code.
648 kes Change console Job name from *Console* to -Console- to eliminate
649 Win32 filename problems. Put Win32 path separator when creating
650 Console file. This fixes bug #846.
651 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
653 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
655 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
656 to force Win32 error message.
658 kes First cut strip path. The data should be passed to the FD,
659 but nothing is done with it yet.
660 kes Enhance the digest and signature routines in the crypto
661 library to accept a JCR and to use it to print error messages
662 so that they will go in the Job report rather than the daemon's
664 kes Simplify some of the verify signature code.
665 kes Simplify a few of the alternative returns in the signature
668 ebl Use only POSIX regex instead of GNU regex in breg.c for
669 File relocation. It fix broken freebsd compilation.
670 kes Convert all other Dir files to use new ua class message
672 kes Tentative fix for missing digest signature in bug 807.
673 kes Correct handle problem in new win32_ftruncate routine.
674 kes Convert ua_purge.c and ua_update.c to use new ua class
675 message routines for bat.
677 kes Correct incorrect installation of LICENSE in Win32 installer.
678 kes Display LICENSE at the beginning of the Win32 install.
679 kes Attempt to correct the need for the png files to be installed
681 kes Reapply my bat.conf install script in qt-console. I think I
682 editted bat.pro instead of bat.pro.in and it was lost.
683 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
684 the /var/lock/subsys for subsysdir. Also corrects typos in the
687 kes First cut update job.
688 kes Correct configure to include qmake of src/qt-console directory.
690 kes Make restore job yes/mod/no print in one command so GUI works.
691 kes First cut implementing backup and restore client.
692 kes Correct editing in Verify output that caused a seg fault.
694 kes Insure that bat.conf is not overwritten during installation.
695 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
696 while I was implementing migration in March 2006 !
698 ebl Cleanup file relocation, using char *RegexWhere instead of
699 char *where + bool where_use_regexp
700 kes Update some manpages and add bat manpage.
701 kes Make a first cut at converting bacula.spec.in for bwx-console
703 kes Apply patch from John Goerzen to add hostname as fourth argument
704 to make_catalog_backup script.
705 kes Fix typos I introduced into bsmtp.c
706 kes Make pm_strxxx() routines handle input of NULL pointer. This
707 is to protect from NULL pointers returned from SQL databases.
708 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
709 kes Add more debug to FIFO code -- fix fifo regression test.
711 kes Implement posix_fadvise in FD, and for reading spool files in SD.
712 kes Add thread timer to bnet_connect() to break from OS if wait time
715 kes Update Win32 build to include new files, new symbols, and
717 kes Implement socket level heartbeat (tcp_keepidle)
718 ebl Commit File relocation patch
719 kes Make bat have 'make install' target.
720 kes Warn during install if old gnome-console binary found.
721 kes Warn during install if old wx-console binary found.
722 kes Add -8 option to bsmtp command line to add content type utf-8.
723 Fixes bug #809. (Character coding problem in bsmtp).
724 kes If < is found in target (from, to, cc) then do not enclose the
725 target in < > in bsmtp. Fixes bug #772 (malformed address).
726 kes When printing certain items in dbcheck, stop after 300000.
727 Fixes bug #822. (dbcheck loops).
728 kes Incorrect status in Dir after waiting for mount with poll set.
731 kes Extend idea of Prefer Mounted Volumes to mean a volume about
733 kes Print waiting to reserve a device every 5 mins.
735 kes Don't call close_part in label.c if tape and relabel.
736 kes Don't free volume if busy in close() -- should help with
738 ebl Fix #824 RunScript bug (After script could be execute twice)
739 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
740 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
741 Add a regression script to test RunScript
743 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
746 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
747 deprecated. No additional bugs will be fixed, and they will be dropped
748 in a future release (probably 2.4.0).
749 kes Change name of wx-console to bwx-console to make it more Bacula
751 kes Change the name of gnome-console to bgnome-console to make it
754 kes Some time in March, a Feature Request with patch from Jorj Bauer
755 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
757 The ability for the director to validate a Client (FD) CN against
758 an arbitrary set of patterns rather than the hostname, with
759 A new 'TLS Allowed CN' set of directives which are implemented
760 in the Client resource. Then pattern matching is used in place
761 of hostname matching against the Certificate's CN. As an example, we
762 have certificates which (a) use a local CA, and (b) have a CN of the
764 kes Add new/changed entry points to Win32 build
765 kes Create unaccepted-projects for projects that are not accepted.
766 kes Simplify locking in the reservations system.
767 kes Add more debug code in reservations.
768 kes Make sure error condition on reserving a volume is handled correctly.
769 kes Correct handling of volume_in_use.
770 kes Correct handling of initializing a device.
771 kes Move handling of broadcasting releasing a device into release_device().
772 kes Correct attaching dcr to dev so that it is only done if device
773 is properly initiated.
775 kes Locking debug level tweaks in SD.
776 kes Tweak new Volume code.
778 kes Add exec external-command [wait-seconds] to bconsole. This
779 executes the external-command. Note! normally external-command
780 should be enclosed in double quotes.
781 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
782 it should normally be off in a production system.
784 kes Implement die command for SD so that we can force it to dump.
785 kes Implement SD lock debug code.
786 kes Implement new algorithm for keeping Volume list in SD. It
787 is now owned by the device.
789 kes Implement new code for freeing in use volumes that should
790 resolve if not all, some of the problems of multiple drive
791 tape conflicts described in bug 801.
793 kes Fix gui/bacula-web/images files in svn.
794 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
796 ebl Fix a bug in batch mode (in string escape)
797 kes Correct migration prune SQL typo that crept in in a
800 kes Move bnet_despool() into class in bsock.c
801 kes Modify job report to include director name and Build OS.
802 kes Move drop root privilege and check_catalog() before fork.
803 kes Add update database scripts (version 9 to 10) to updatedb directory.
805 ebl Check size and age of each file after its backup to see if
806 it has changed during backup, if 'checkfilechanges' is set.
807 The FD will do an extra check (stat(2)) after
808 each file backup. mtime, ctime and size are compared with
809 'before backup' information. If time or size mismatch, an
810 error message will be generated. You must upgrade FD to use it.
812 kes Make database name and user configurable
813 --with-db-name=xxx --with-db-user=xxx
814 kes Add back database type to message.c for debugging.
816 kes Implement dir_sql() which issues an SQL query.
817 kes Modify bat medialist to use dir_sql() and do some minor C++
818 formatting as well as eliminating a number of pointers, simplifing
821 kes Fix some of the mtx-changer grep commands for tape label readers.
822 kes Convert a number of bsendmsg into the appropriate send/warning/error
824 kes Suppress the using database message in the .sql command.
825 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
827 kes Add context menu for floating a window.
828 kes Some minor cleanup and name changes in qt-console
829 kes Add doing mt setblk 0 in Win32 mtx-changer.
830 kes Apply Martin's bug fix to move definition of ENODATA for
832 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
835 kes More pruning cleanup.
836 kes Turn on wait_for_drive by default in mtx-changer.
837 kes Turn on Batch insert code by default as it now passes regression.
838 kes Add ./configure --enable-bat to enable building of Bat.
839 No install yet though.
841 kes Implement a new .sql command for bat.
842 kes Implement code to turn off pruning in obtaining the next volume.
843 Pruning is turned off for the status dir command, but turned on
844 for SD requests and for the list nextvolume command.
846 kes Correct Qmsg() that was not updated correctly when committing a
847 previous change (probably the recent TLS patch).
849 kes Write new subroutine is_volume_purged() that explicitly checks
850 if the Volume is purged, and if so marks it as such. This should
851 resolve problems reported about needing to mount twice to recycle
853 kes Rewrite pruning algorithm to do more work in the SQL engine, and
854 to pass a list of JobIds to be deleted to SQL. Also, minimize the
855 amount of duplicated code.
856 kes Do volume pruning only for the Media Type desired (reduces pruning time
857 if multiple Media Types are in the same pool).
858 kes Implement more detailed info in the Job report for the Bacula version
860 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
862 ebl Add bbatch tool to bench database and insert mode.
863 Fix sql quote stuff in batch mode
864 Fix sql stuff for mysql
866 kes Correct problems with am/pm scheduling. Fixes bug #808.
867 kes Implement new prunning code that prunes up to 1000 jobs at
868 the same time. The same technique can be applied to a number
869 of other prune/purge subroutines.
870 kes Add an insanity check when starting a new tape job to ensure
871 that the tape position has not been changed. If so fail the
873 kes Fix Win32 build for dlls to add the folllowing:
874 src/lib/bsock.c -- new file with new entry points
875 src/lib/dlist.c -- new entry points
876 src/cats/sql_create.c -- new entry point
877 src/cats/sql_cmds.c -- new DATA item exported
879 ebl batch mode cleanup bscan-test is ok now.
880 kes Implement SD code to check length of disk volume before appending.
882 kes Correct return status on db_batch... routines.
883 kes Add call to db_write_batch_file_records() to migration code.
884 ebl Fix AfterJob timing
885 kes Move the checking of the database in initializion of the Director
886 to after we drop privileges. This avoids the need for both root
887 and bacula access to the DB.
888 kes Correct a misplaced variable definition in src/filed/backup.c
889 kes Correct how the new batch insert db_create_attributes_record()
890 uses the arguments. Caused a seg fault in bscan.
891 kes Implement lock() and unlock() methods in DEVICE class.
892 Implement block() and set_block(xx) methods in DEVICE class.
893 kes Modify bnet_connect() so that it uses time() to check for the
894 wait time expiring (on some OSes, some system calls may not
896 kes Modify Verify to obtain the previous JobId when it is actually
897 running rather than at schedule time (as it was in 1.38.x).
898 kes Fix src/job.c to handle MaxWaitTime correctly. This should
900 kes When checking pid in pid file, continue running if the pid is
901 the same as ours. This occurs on IRIX after a system crash.
904 kes Extend new GUI API.
905 kes Make the ua structure a class, and implement send_msg(),
906 error_msg(), warning_msg(), and info_msg().
908 kes Apply fix from for building wx-console on the Mac from
910 kes Implement new select mechanism for GUI programs.
911 kes Reorganize initialization of stackedWidgets in bat.
913 kes Add updated nagios plugin supplied by Christian Masopust.
915 kes More bat implementation.
916 kes File migrate bug with Pool Occupancy using mediaid instead
917 of jobids. Fixes bug #795.
918 kes Fix orphaned buffers in filed backup and verify due to
919 crypto buffers not freed during errors. Fixes bug #789.
920 kes Extend new GUI api code to tree commands.
921 kes Ensure that tree and dot commands check console ACLs.
922 kes Permit marking directory with trailing slash.
923 kes Allow 20 console connections (instead of only 10).
925 kes Add smartctl call to bacula-sd.conf as an example of getting
928 kes Modify jobq.c to let simultaneous restore jobs run. This may
929 cause them to fail if they cannot get a drive.
930 kes Add Client Connect Wait to Storage daemon to permit users to
931 modify the time the SD waits for a FD connection.
933 kes Correct virtual changer check which was backwards. This caused
934 volumes to be unloaded into slots already occupied.
936 kes Apply Command ACL filter to JobId list in restore command.
937 kes Correct typeo in var.c patch.
939 kes Don't let Bacula prune File or Job records for the current Job.
940 kes Fix variable substitution pad + inc bug reported (with patch)
943 kes Correct SQLite log table index as reported by Luca Berra.
945 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
947 kes Begin implementing new comm signals for API.
948 kes Fix a few places in lib/message.c where the open fd may
950 kes Continue implementing lib/bsock.c (real class). Make jcr,
951 who, host, and port private. There are new methods to access
952 them for non-class use. This required touching a number of files.
954 kes Add LANG=C to autoconf/randpass so it works with languages other
955 than English. Fixes bug #788.
957 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
959 You will not be able to generate Include/Exclude list any more.
960 It will be fixed soon.
961 If you want to use this, you can apply
962 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
964 kes Restore of sockets created false error messages because Bacula
965 no longer restores sockets, but the code was still trying to
966 set the attributes on a non-existent file. Reported by a user.
967 ebl finish RecyclePool feature
968 Media will takes Pool.RecyclePool
969 when moving from Scratch to a Pool or when user will do
970 update volume=xxx frompool
971 To use it, add RecyclePool = aPool to your Pool resource
974 RecyclePool = Scratch
978 kes Expand new BSOCK class adding signal() and new BNET signals.
979 kes Begin enhancing the dot commands adding a new API function
980 that returns more information and will make it easier
981 to interface to the Director from a program.
983 kes Make DEVICE fd private. Its new name is m_fd, and can be
984 obtained with dev->fd() outside the class. This is the
985 first of many DEVICE members to be made private.
986 kes Implement Michael Renner's idea on having a virtual disk
987 changer. I made some minor modifications (e.g. I did not
988 implement the Virtual Changer directive, but simply set
989 the Changer Command to an empty string.
991 kes Implement a BSOCK send() method that writes the whole record
992 in a single write() request rather than in two.
993 ebl add update volume=xxx recyclepool=yyyy
994 volume takes recyclepool from pool when using update volume=xxx from pool
996 kes Fix encryption deblocking bug, which caused some restored files
997 to be truncated. This fixes bug #763.
998 kes Add FD event sequence order prepared by Eric -- for RunScripts.
999 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1001 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1002 ebl Use btime_t instead of uint64_t in media patch.
1004 kes Optimize the use of the database a bit in the Status dir command.
1005 Only open it when needed, ensure that if any previous database
1006 was opened, it is closed.
1008 kes Correct VolCatBytes bug from media patch.
1009 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1010 in the case of orphaned records.
1011 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1012 and File records in 300K chunks to be more efficient. This
1013 idea came from Juan Luis Frances (if I remember right).
1014 kes Apply Eric's scratch patch that moves a purged Volume to
1015 the RecyclePool. Question: how is RecyclePool set? what
1016 happens to the ScratchPool?
1017 kes Apply Eric's media patch that collects read/write media
1018 times as well as byte counts. This patch requires a
1019 simultaneous upgrade of the DIR and SD. Note, there
1020 should be some way to turn off timing. I'm not sure
1021 times are in Bacula units.
1022 kes Apply Eric's batch-insert patch.
1024 kes Update projects list.
1026 kes Implement Include/Exclude file lists in FD as dlists using
1027 the new dlistString class. This permits efficiently having
1028 large include/exclude lists and completes project Item 25.
1029 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1030 console is authorized to cancel the job. This fixes bug
1032 kes Modify SD so that the VolCatJobs medium record is updated
1033 at the beginning of a Job rather than the end. This
1034 fixes bug #775 where exceeding MaxVolJobs caused jobs
1036 kes Added a mutex around getting and setting Volume information
1037 so that multiple simultaneous jobs will single thread.
1039 Switch to using Subversion
1040 kes Remove src/pygtk-console/ from configure
1042 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1043 plus the entrypoints.
1044 kes Apply patch supplied that corrects debug print
1045 in canceling jobs for max run time. Supplied as
1046 part of bug #621, which was previously fixed.
1048 kes Test on job_canceled() and sd_msg_thread_done inside
1049 loop starting the message thread to avoid a race condition.
1051 kes Remove rl_catch_signal from console.c as it conflicted
1052 with the header definition. Fixes bug #765.
1053 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1055 kes Clarify some stored/acquire messages to indicate if the
1056 problem is with read or append.
1058 kes Fix memory leak with storage ids in cats/sql_get.c
1059 kes Terminate watchdog earlier to avoid reference to released
1060 memory -- reported by Jason Austin.
1061 kes Move closing the database from jobq.c to the director daemon
1062 termination routine. This fixes memory leaks for shadow jobs
1063 (i.e. migration jobs).
1064 kes Free up the unique jobid chain items in migrate.c. This fixes
1065 a memory leak problem.
1066 kes Convert some ugly looking for statements to use foreach_alist
1067 in findlib/find.c. This will facilitate converting the structures
1068 to use dlist (for large include/exclude lists).
1069 kes Fix a bug in the btree.c and btree.h routines, then rename them
1070 rblist and add them to be built in src/lib. Include some new
1071 methods written by Rudolf Cejka that make the code more readable
1072 (hides some of the ugly casting).
1073 kes Add set_next() and set_prev() methods which make the code much more
1074 readable. Also add a new dlistString class that facilitates storing
1075 strings in dlists. To be used in the large include/exclude lists.
1076 kes Make some trivial modifications to lib/tree.h that use rblist
1077 rather than dlist for storing the tree links. This was suggested
1078 by Rudolf Cejka. The result of this is that the restore tree now
1079 uses red-black binary trees rather than simple linked lists. This
1080 should give rather dramatic speed improvements for directories
1081 contining large numbers of directories/files (more than 10000).
1083 kes Fix maxruntime bug #621.
1085 ebl Implement the include JobID in spool file name project.
1086 kes Reorder projects file in order determined by Jan 2007 vote.
1087 kes Implement item #12 on project list -- quick release of FD by
1089 kes Fix open of SQLite3 db where user does not have write permission
1090 so that DIR does not crash. Fixes bug #761.
1092 kes Add back missing @ in Win32 Makefile.
1093 kes Change 'Device not configured to autolabel' from INFO
1095 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1096 which should restart an indefinite # of times.
1097 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1098 other DIR specifications.
1100 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1101 Fix path quoting in SQLite scripts.
1102 Fix problems with SHGetFolderPath.
1104 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1106 kes Fix Job restart on error bug that promotes an Inc to a Full
1107 backup. This should fix bug #755.
1108 kes Add qt-console and first cut of code.
1112 kes Fix Bacula->Documentation link on Win32 to point to index.html
1113 instead of bacula.html. Fixed bug #750.
1114 kes Return JobId in db_get_job_record() when JobId==0. This should
1116 kes Do not release source pointers when restarting a failed job.
1118 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1119 This *should* fix bug #747.
1120 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1123 kes Modify USTORE constructor to set an empty store_source string,
1124 and don't copy the store_source string in a cancel. Hopefully
1125 this will fix Arno's seg fault, bug #744.
1126 kes Add back code to disable conio in configure. Fixes bug #743.
1127 kes Correct the Options scanner in the FD to correctly handle
1128 SHA1 option, which was eating the next option. Reported by
1130 kes Add code to indicate when the SD is spooling, spool wait, and
1131 despooling as requested by Alan Brown.
1133 Version 2.0.0 released: 4 January 2007