1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Apply patch from bug #1069 that corrects spurious error messages
29 when ACLs enabled on SGI but no ACL exists.
30 ebl Fix small segfault in bacula-sd when debug level is 500
31 kes Modify run_program() and run_program_full_output() to use
32 call by reference for the results string. This corrects a long
33 standing problem where the address of the string may be changed
34 in the subroutine but not in the calling program.
36 kes Re-enable code to remember last volume mounted on a non-tape
38 kes Add patch supplied in bug #1068 that fixes a SD crash when using
39 a Virtual autochanger.
40 kes Generate correct JobMedia records during spooling/despooling when
41 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
42 <tih@hamartun.priv.no> for excellent analysis and testing.
44 kes Tweak hash algorithm for htable using Martin Simmons idea
45 for doing a circular shift.
46 kes Remember what volume is in VTLs (previously turned off for
48 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
49 pointed out some problems in creating JobMedia records during
50 spooling with concurrent jobs. Fix the problem by updating the
51 start file position before despooling and generate a jobmedia
52 record at the end of despooling.
54 kes Fix handling of JobMedia records during spooling and when a
55 Volume is changed without actually writing data to the Volume.
57 kes Implement bsock code to permit locking. Use the new code in Verify
58 in the FD to prevent the heartbeat thread from disrupting the Verify
60 kes Modify SD locking to eliminate locking the reservations system from
61 outside the system. Use the volume lock when getting media data
62 and reserving a new volume at end of media.
63 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
64 when SD starts are not locked into place.
66 kes Fix error compiling runscript code on 64 bit machines.
67 kes Tweak Win32 mount point code.
68 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
69 cleared giving bad file estimate).
70 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
73 kes Keep Schedule run lists in order as suggested by
76 kes Implement autostart scripts for Debian.
77 ebl Implement upgrade catalog scripts.
79 ebl Apply jobstat patch for long term statistics. Have to implement
80 purge stats command and upgrade scripts.
81 kes Fix mtx-changer.in for broken Debian mt program.
83 kes Fix large number of JobMedia records reported by Eric Bollengier.
85 kes Apply doc fix from bug #1062.
86 kes Resolve crash and improper restore wx-console Win32 restore
88 kes Update Win32 wxWidgets to latest version.
89 kes Attempt to do correct handling of Win32 mount points. Should
91 kes Fix Win32 FD backup/restore memory leak due to improper termination
92 of BackupRead/Write. This fixes bug# 1038.
94 ebl Reduce memory usage for accurate backup, working only with ctime
95 and mtime. (not all Lstat field)
96 About 40MB for my linux system (400.000 files)
98 kes Add dcr->reserved_volume flag that allows us to release a volume
99 even if it is not vol->released. This allows maxvol2 to work when
100 Volumes expire and we are already writing to the device (i.e. a
101 volume is pulled out from under us by another job terminating after
102 we reserve the drive).
104 ebl Permit multiple command/console per runscript definition.
105 RunScript { command = /bin/true ; command = /bin/false ... }
106 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
107 (restart an application) just after the VSS snapshot on windows.
108 kes Don't zap dcr values during release_volume() as they might
109 have the next Volume to be mounted.
110 kes Fix AIX prototype.
112 kes Second cut of drive switching during backup.
115 kes Update Win32 version of wxWidgets to most recent version.
116 kes Tweak Copy job details.
117 kes Rework dir_find_next_appendable_volume to make a bit more effort
118 to find a suitable volume before giving up.
120 kes Make ask_sysop_to_create... to return if waken from wait.
121 This helps get out of blocked conditions.
122 kes Experimental implementation of switch_device in reservations.
123 kes Implement FD version to allow easier protocol changes.
124 kes Add Plugin Options string -- not yet passed to FD.
125 kes Implement PluginOptions ACL.
127 kes Attempt to correct problems with restores with autochangers and
128 use counts going negative
129 kes Rework SD status command and implement API for bat. Implements
130 header, runing waitreservation, devices, volumes, spooling,
131 and terminated status keywords.
132 .status storage=xxx <keyword>
133 kes Clarify TLS error message by adding double quotes around name.
134 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
135 kes Pass jcr to tls routines so debug messages can be handled better.
136 kes Rework jobq resource allocation code, and possibly fix a bug
137 that caused reference counts to get out of sync.
139 kes Rename fd/dir plugin to use Bacula standard underscore.
140 kes Plugin work -- bring dir up to fd level.
141 kes Start implementation of VTL code
142 kes Fix Win32 build after adding new cats subroutine.
144 kes First cut at Duplicate Job implementation.
146 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
147 kes Start PluginOptions string, and refactor a bit of ua_run.c
148 ebl Apply Allan patch that permit to reset recyclepool.
150 kes Test patch -- possible fix or improvement for bug #1053
151 kes Refactor FD and SD status commands to permit new API code in
152 SD, and to fix Win32 build.
153 kes Win32 build is now working.
155 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
156 some ideas in patch from Scott Bailey.
157 kes Begin implementation of duplicate Job control.
158 kes Fix some of Win32 build after recent additions.
159 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
160 which causes the FD to detect whether or not the OS has the
161 honor no dump bit (*BSD systems), and if so, to skip backing up
162 any file with this bit set. The feature is enabled by setting
163 'honor no dump flag = yes' in the Options section of a FileSet.
165 kes Correct po warning message with datarootdir
166 kes Implement more code in dird.c to put configuration parsing in
167 a class rather than use globals.
168 kes Restructure SD status command for implementation of bat API
171 kes Suppress incorrect 'Will not descend from x into y' messages.
172 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
173 daemon globals used by parser.
174 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
176 kes Fix free of plugin_list when none exists.
178 ebl Apply accurate project patch.
180 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
181 on non-mempool object)
182 kes First cut of converting FD .status to work with bat API.
184 .status client=XXX header
185 .status client=XXX running
186 .status client=XXX terminated
187 kes Implement first cut of Copy Job.
188 kes Implement Catalog in Pool resource. It overrides catalog specified
189 in the Client resource.
191 kes Apply patch (with some difficulties) from Joao Henrique Freitas
192 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
194 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
195 ftruncate() actually works. In the case of some (cheap) NAS devices,
196 it does not, and so recycling NAS Volumes does not work. The code
197 simply unlink()s the file, then recreates it. This fixes bug #1011.
199 kes First incomplete cut of big malloc blocks for htable.
200 kes Tweak plugin code.
202 kes Plugin debug code + tweak a couple bat dialog layouts
204 kes Fix creating first JobMedia record during Migration to include
205 proper index. This caused slow restores of migrated jobs.
206 kes Temp fix to plugin name file_index.
207 kes Bacula backed up and restored a MySQL database.
209 kes Implement plugin restore.
210 kes Implement parsing of db_driver to give db_type index.
212 kes First cut of plugin restore code.
213 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
214 and do not strip paths on symbolic links.
215 kes Set catalog backup database and user name from values specified on
216 the ./configure line.
217 ebl Fix #1031 about wrong pool source information in job report.
220 kes Remove a redundant jcr argument to find_files, match_files, and
222 kes Implement '.status dir header|scheduled|running|terminated' that
223 prints the requested status section. With the exception of the
224 header, the other reports have fields separated by tabs (\t).
226 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
227 a resource embedded run command to find a since time if no explicit
228 since time was supplied on the command line.
229 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
230 that updates the state file at job termination time in addition to
231 when the daemon terminates.
233 kes First version where a plugin did a backup.
234 bpipe-fd.so created a backup file, wrote a test
235 string to it, and Bacua could restore this fabricated file.
237 kes Implement DB Driver = string for the DBI driver.
238 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
239 kes First cut of code for loading Win32 plugin dlls. Implement
240 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
241 and implement a dlfcn.h file based on opengroup's definitions of
244 kes First cut plugin directives.
246 kes Apply patch from bug #1049 to prevent stripping the path on a
248 kes Attempt to fix bug #1047 where stripping a path corrupts the
249 heap. Waiting for feedback.
250 kes Correct the Mount message not to suggest labeling a new tape
251 when doing a restore. Submitted by email by John Stoffel.
252 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
253 FD by using casting. Reported in bug #1042.
255 kes A bit of crypto cleanup. More later.
257 Release Version 2.2.8
259 kes Apply patch from Martin to correct bug #1040, bscan sets existing
261 kes Fixed important spelling error in doc -- bug #1045.
263 ebl Fix bextract to be able to extract non-portable Win32 data to
265 kes Move initialization of read/write res lock earlier in the code.
266 This fixes the crash with a null conf file. This fixes bug
268 kes Redefine CURES in lib/parse_conf to be URES and move it all
269 into lib/parse_conf.c -- this responds to bug #1042, but does
270 not fix it. The fix is not to compile with FORTIFY_SOURCE.
271 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
272 the trunk SVN. I don't think this was reported as a bug.
274 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
276 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
278 kes Add DataDespooling and DataCommitting status (committing is
279 the last despooling).
280 kes Finish implementation of new reservations code noted below.
282 kes Fix bsnprintf for float point numbers. I broke recently when
283 parameterizing some variables. This fixes bug #1036.
284 kes Undo recent reservations changes ... will apply them later
285 when they work better.
287 ebl Fixes #1034 which cause mysql to hang the connection after 8h
288 ebl Change default statistics target of filename.name and path.path
289 fields for PostgreSQL. This speeds lookup by indexes. Thanks
291 kes A few more tweaks to new reservation code. Make sure to clear
292 vol released flag when retaking volume. When reading label and
293 label is bad mark volume unused. When recycling, mark volume
294 unused so it can be renamed.
296 kes Fix reserve_volume() so it doesn't release a volume in use
297 (i.e. a volume entry not marked released). This should be
298 the last part needed to fix bug #1018.
300 kes Move Heartbeat documentation from Job to Director resource.
301 This fixes bug #1033.
303 kes Fix existing switch drive SD code to call autochanger to release
304 any old volume. This must be done to keep the autochanger from
305 releasing subsequently newly reserved volumes in doing a close().
306 This should fix bug #1018.
307 kes Fail if attempting to get console input in batch mode. This
308 should help fail RunScript console commands that are incomplete.
309 kes First cut implementing switch_drive() in SD (not actually called).
311 kes Implement first cut running console commands in a RunScript.
313 ebl Fixes bug #1028 where 'Selection Type' option was not usable
315 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
318 Release Version 2.2.7
320 kes Add new free_tls() entry point so that Win32 builds.
321 kes Fix compile warning in src/lib/util.c
322 kes Fix entry point for edit_job_codes() so that Win32 builds.
323 kes Fix seg fault Frank Sweetser reports in regression testing
324 on his systems. The problem was that the original author of
325 bsnprintf.c did not take into account the side effects of
326 using ++x in the argument to a #define.
327 kes Make SD protocol backward compatible with version 2.2.x.
329 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
330 because Bacula no longer restores sockets.
331 ebl Always use ignorecase fileset option on win32 FD.
333 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
334 that implements double quoting include names in conf files,
335 and also allows piping input by having the first character
336 be a vertical bar (|).
337 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
338 that implement %f in RunScripts to pass the FileSet name.
339 kes Skip leading | when lex input comes from a pipe as suggested
340 by Michael Stapelberg <michael@stapelberg.de>.
342 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
343 Nerijus Baliunas <nerijus@users.sourceforge.net>
345 kes Implement Plugin Directory and plugin events.
347 kes Implement a security enhancement: TLS authentication but no
348 encryption. Enabled by setting 'TLS Authentication = yes'.
349 Note when this is on, TLS encryption is turned OFF!
351 kes This patch corrects a problem where the maximum concurrent storage
352 jobs counter gets out of sync during restore jobs causing jobs to
353 'wait on max Storage jobs'. This patch fixes bug #1009.
355 kes This patch fixes bcopy so that it produces correct Volumes.
357 kes This patch eliminates spurious output to the console during a VerifyVolume
358 job that contains encrypted data. It fixes bug #1024.
360 kes This patch prevents the 'status dir' command from trying to use a scratch
361 volume and possibly moving it from one pool to another. This patch fixes
364 kes Add new include to postgresql.c suggested by Marc Cousins so
365 that it compiles correctly with pgre version 8.3.
367 kes Fix --archivedir addition to configure. Replace it with
368 --with-archivedir in configure.in This fixes the regression
370 kes This patch fixes bug #1012 where the job is canceled because
371 of Max Run Time exceeded when the job has not yet started.
373 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
374 one 'part' to write. Instead of each part being stored on disk,
375 written to DVD, then deleted from disk, all parts are written to disk,
376 and only the last is written and deleted from disk.
377 kes This patch fixes the status command to include the formating string for
378 JS_AttrInsterting. It fixes bug #1021.
379 kes This patch should fix the Mac OS X build problem on the latest
380 Darwin, where sys/types.h was not included correctly (apparently
381 due to a change in the Mac headers). The solution was to explicitly
382 ensure that it is defined for the ./configure.
383 This patch also has a rebuild of configure that includes the Debian
384 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
385 kes This patch should ensure that queued messages to the console are
386 displayed as soon as possible. It should fix bug 1007, but has been
387 reported not to work.
389 kes This patch fixes the infinite loop when trying to increase the
390 maximum number of volumes in a Pool during the add command.
391 This patch fixes bug #1008.
393 Release Version 2.2.6
395 db Remove extra data on estimate command in joblist for bat.
397 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
398 really change anything, but is the beginning of doing it *right*.
399 To do it completely right the LastWritten date must be passed to
400 the SD, but it is not yet done.
401 kes Minor tweaks to some bat restore SQL.
402 kes This patch fixes bug #1003 where putting the message output from
403 a Verify job into the catalog results in a recursive loop. The problem
404 seems to show up only with postgresql (to be verified).
405 kes Correct %x to %p in postgresql debug statement.
407 kes Fix bug #942 where lots of emails where generated when the heartbeat
408 interval was low and Bacula wanted a different tape from the one in
411 ebl Add new SD despooling attributes and Dir inserting attributes
412 job status codes in the catalog (Status table).
414 ebl Use qmake-qt4 instead of qmake when available (debian system).
416 kes Add a security warning to src/cats/make_catalog_backup.in indicating
417 that passing the password via the command line (arg 3) is insecure.
418 This responds to bug #990 (it doesn't fix it).
420 kes Set default debug_level to zero. This corrects bugs #991 and #993.
421 kes Fix a crash in bat when it cannot connect to the Director for example
422 if the Director is not running.
423 kes Remove redundant INDEX (JobId) from File table in the trunk.
425 kes Make explicit exception to GPL in LICENSE to permit linking
426 the Win32 FD with Microsoft VSS code.
427 kes Apply the Solaris package patch from
428 Masopust, Christian <christian.masopust@siemens.com>
429 kes Apply the patch to optionally add a timestamp in the debug output
430 submitted by Mariusz Czulada <manieq@wp.eu>.
432 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
433 backend (sql_strerror). Fixes bug #989
435 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
436 It applied with no problems.
437 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
439 kes Redirect stderror to stdin on mt status command in mtx-changer.in
440 since the status is returned on stderr on Solaris.
441 kes Activate Close button on tray-monitor window. This fixes
443 kes Check for NULL item in parse_conf.c before calling it. In the
444 case of Device, there is no item and this caused a seg fault when
445 Device appears in the conf file.
446 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
447 avoids pulling in config.h multiple times in some new code.
449 kes Fix spurious warning message printed when creating a volume with
450 a LabelFormat. This fixes bug #976.
452 Release Version 2.2.5
454 kes Add JobId in place of Job name in all the Jmsg() output.
455 kes Correct the APP_DESC for the Win32 storage service (remove an e).
457 kes Make maxvol-test and new more strict maxvol2-test work.
458 kes Print JobId in all Jmsg() job output.
460 kes Add new SD despooling attributes and Dir inserting attributes
461 job status codes. This fixes bug 961.
462 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
464 kes Fix doc issue. This fixes bug #963.
465 kes Fix listing performance problems in bat. Pointed out by
467 kes Remove old debug code.
468 kes Fix bat code that tests for Win32. This should fix bug #968
469 kes Query 5 list wrong Vol after migration. This fixes bug #960
471 ebl Fix #969 where user can't change Replace option in restore menu.
473 kes Save jcr in thread specific data (tsd) for each thread.
474 kes Make Dmsg() print JobId as -%u.
475 kes Make Jmsg, Emsg, and others automatically pickup the jobid
476 for the thread if it exists.
477 kes Remove old reservation debug jid code.
478 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
479 ebl Add an option that permit to specify spool size in job
480 definition. (Applying patches/testing/spoolsize_per_job.patch).
481 You must upgrade SD and DIR at the same time.
482 dvl Add new configuration item --archivedir
483 dvl Adjust regression tests to use tmp not /tmp. This will allow
484 multiple concurrent runs of the regression tests.
486 kes Fix race condition that drops final block written to volume.
487 This happens in rare cases with multiple simultaneous jobs
488 when the Volume fills. This fixes bug #964. May be related
489 to bug #935 and possibly #903.
490 kes Eliminate more strerror() and replace with bstrerror().
491 kes Remove BSD getopt and replace with unrestricted IBM version.
492 kes Fix Win32 build for changed calling sequences.
493 kes More tweaks to the mount volume routines to get everything
494 right. Changed variable name from find to have_vol, which is
495 much easier to understand.
496 kes Enhance btimer debug code.
498 kes Fix FD->SD authorization failure, which was due to spurious
499 wakeups from a pthread_cond_timedwait(). Simply check the
500 predicate before continuing. This fixes bug #953.
501 kes Add const char where needed (more to do). Remove temp debug code.
503 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
504 kes Don't overwrite error message in check_tables_version.
506 kes Unlock batch insert tables with same calls used elsewhere.
507 kes Allow starting 59 jobs a second.
508 kes Make SD session key more random.
509 kes Add retry for SQLite opening db if it fails. Probably helps
511 kes Suppress extra error messages during batch insert failure.
513 kes Add jcr to timer packets so if killed message can be sent to job.
514 kes Add JobId to all Dmsg() output.
515 kes Put some FD auth code on dbglvl rather than fixed.
516 kes Return insert attributes error message in db msg buffer to avoid
517 false error messages. Helps fix bug #966.
518 kes Separate batch init error messages. Probably helps fix bug #966.
519 kes Make SD code that contructs attribute insert check string lengths
521 kes If Dir gets an error during inserting attributes, cancel SD.
522 This reduces unnecessary error messages.
524 kes Correct search boolean for getting Volume info
525 ebl Cleanup batch insert code. Probably fixes bug #965.
526 kes Back out one small change to the reservation system (reserving a volume).
527 kes Rework how a Volume is mounted. It is now much more intelligent and
528 will always attempt to use any mounted volume if possible and reduces
529 calls to the Director asking about volumes.
531 kes Turn off some code when batch insert not enabled.
532 kes Edit FD name in connect error messages.
533 kes Rework the reservation system to take into account that the Director
534 might give us a Volume that is different from the current one being
535 used, and to ensure that we don't exceed Maximum Volume Jobs.
536 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
537 fatal error with multiple jobs running'
538 kes Add more debug code in reservation system.
539 kes Implement maxvol-test to check bug #947.
541 kes Add code to handle tray monitor separated from Win32 FD.
542 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
544 kes Add missed return in fixing verify bug -- trunk only.
545 ebl Fix a command parser issue causing a director segfault.
546 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
548 kes Increase the max block size to 4MB fixes bug #957.
549 kes ERABT if user sets min block size > max block size. Fixes bug #956.
550 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
551 is not properly mounted (recognized) during a poll.
552 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
553 Job that has differences reports Verify OK.
554 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
556 ebl Add an option to operate on all pools with update vol parameters.
557 This complete the project 20. Patch from Nigel Stepp.
558 ebl Add history support to bconsole when using readline.
559 Using Ctrl-D to exit doesn't update .bconsole_history
560 kes Modify new volume algorithm to use max MediaId for generating next
561 volume number rather than the count of Volumes. This should essentially
562 eliminate the failure rate if some volumes were deleted. Bug #921.
563 kes Begin implemention of Optimize Job Scheduling.
564 kes Implement restore callback that Dirk and I agreed on for bat
565 restore. This fixes bug #928. Restore of backup of zero files fails.
566 kes Fix SQL Catalog logging which broke with new db_escape_string
569 Release Version 2.2.4
571 kes Fix bacula_cats.def for new db_escape_string().
572 kes Increase size of name string when FD making connection to SD.
573 May fix bug #953. FD->SD connection failure.
575 kes Add code to help Dan debug 2drive-incremental-2disk test.
576 kes Add code to try to fix bug #908.
577 kes Add waits to multiple exit detection code to try to force pid
578 file to always be deleted.
579 kes Restore good dev.tar.gz to rescue set appropriate binary property.
581 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
582 trying to switch drives by checking for blocking before unblocking.
584 kes Cancel storage daemon in all cases where FD reports error. This
585 should fix virtually all cases of bug #920.
586 kes Fix db_escape_string() for MySQL which did not compile.
588 kes Fix error message that was clobbered when Dir tells SD it does not
589 have write permission on Volume. This should fix a minor point
590 in bug #942, but not the main problem.
591 kes Add code to cancel job in SD if FD connection fails. This should
593 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
594 dvl Pass jcr and db into db_escape_string() to enable better escaping
596 kes Fix migration code to get correct Volume name with multiple volumes
597 by skipping |. Fixes bug #936.
598 kes Implement patch supplied by Landon to fix bug #944 where using
599 TLS with bconsole uses 99+% of the CPU.
600 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
602 kes Move patches into patches directory.
604 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
607 ebl Using 'm' in bconsole will show messages like before,
608 and not memory usage.
609 kes Fix bug #935, and probably also bug #903 where files were not
610 restored. MediaId was not properly set in JobMedia record after
613 kes Suppress chown and chmod error messages if the FD is not running
616 kes Apply Martin Simmons' patch that should turn off the new API usage
617 when batch insert is turned off allowing building on older
619 kes Add ./configure search in qwt-qt4 for qwt package
621 kes Bacula is now free of 3rd party GPL copyrighted code!
623 kes Add guid_to_name.c/h which replace idcache.
624 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
626 ebl Detect if new PosgreSQL batch insert API is present.
627 kes Correct incorrect mempool call causing Director crash. Occurs on
628 systems without va_copy().
629 sb Update spec files for 2.2.1 release
631 kes Fix memory pool call in ua_output.c. bug #934.
632 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
633 Add test program to fnmatch.c
635 kes Integrate patch to README.vc8 from
636 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
637 edit it to get it into Unix patch format.
638 kes Implement mkpath.c to replace old FSF makepath.c
640 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
642 Release Version 2.2.1
644 kes Update POTFILES.in
645 kes Cleanup a few underquoted AC_DEFUNs in configure
646 kes Apply patch from Martin Simmons that adds a test for va_copy to
649 kes Fix bug #921 by increasing the number of tries to create a new volume
651 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
652 can be called multiple times. Implement a version for machines
653 without va_copy() that gets a big buffer.
655 kes Integrate more portable zone offset code into bsmtp.c
656 Submitted by Attila Fülöp.
658 kes Fix bad SD->FD return status reported by
659 (James Harper) <james.harper@bendigoit.com.au>
660 ebl Fix a bug in read_close_session which return random status
661 thanks to James Harper
663 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
664 and directory names during restore of single file/directories.
665 kes Add sanity checks to .sql command when string is empty. Hopefully
666 that will resolve Dirks Director crash.
668 kes Apply patch submitted by Martin Simmons that corrects a seg fault
669 in the bsmtp chat subroutine when debug is >= 10.
671 kes Fix Director crash when running bat SQL queries.
672 kes Add David's notes on Item 8: Copy pools.
674 kes Rework projects file to be current and ready for a vote.
675 kes Enhance lex scanner error message.
677 kes Tweak LICENSE file to mention BSD code.
678 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
679 if specified on the ./configure.
680 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
681 This class is intended to allow us to open a second bsock to the
682 Director while in the restore subdialog.
684 kes Fix configure to create bat Makefile before creating dependencies.
685 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
686 kes Add a tooltip to the tray monitor.
687 dvl Set the Director's PID file before dropping privs. This fixes
690 kes Update AUTHORs file
691 kes Increase the default max concurrent jobs to 20 in FD and SD to
692 correspond with the default .conf files.
693 kes Rewrite the Win32 service routines. This eliminates the 3 copies
694 some different, of the same file created by RN when porting the
696 kes Rearrange some of the Win32 directories and the placement of the files
698 kes Set DEVELOPER flag in version.h
700 ========================================================================
701 Release Version 2.2.0
703 kes Apply a second doc patch from Marc.
704 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
705 improves the tips section that discusses how to setup multiple
708 kes Update bat README file.
709 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
710 corrects a typo in the Recycle status check in db_find_next_volume().
711 This will probably fix a number of annoying problems with multiple
713 kes Modify most of dird/msgchan.c to use bsock class calls rather than
714 bnet calls -- no functionality change.
716 kes Modify the Verify output to specify if files are missing on
717 the Volume(s) or disk. Fixes confusion in bug #916.
718 kes When more than one Volume is read in a migration job, the last
719 Volume bytes reported are from the last read volume rather than
720 the last written volume. Fixed. This fixes bug #910.
721 kes Fix display of Recycle flag after update volume=foo recycle=yes.
722 It previously printed New Recyle flag is: no. This fixes bug
725 kes Correct seg fault when switching tape drives during restore.
726 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
727 be used until after 2.2.0 release.
729 kes Remove fnmatch() in SD that permitted wild card specifications.
732 kes Fix %g in filename returned by SQL for browse tree reported by
734 kes Fix configure so that it puts config.out in the cwd rather than
736 kes Attempt to fix the locking problem reported by Eric in bug #906.
737 kes Make berrno class to leave errno unchanged after constructor call.
738 kes Make bnet_server use the heap rather than the stack to allocate
739 its socket fd pointers to avoid a crash at termination. Problem
740 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
742 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
743 and putting it in depkgs-qt along with Qt4.3.
745 kes Rework code in acquire.c that switches drives for reading when
746 the Media Type does not match. This should fix bug #906
748 ebl Fix a director segfault during job setup #907
749 kes Correct seg fault in postgresql when first operation returns no
750 rows. Fixes Dirks File browser problem seg fault with bat.
752 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
753 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
756 kes Implement PopUp YES/NO dialog for bat.
758 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
760 kes Correct RunScript to terminate job in FD on failure.
761 kes Change abort_on_error and AbortJobOnError to fail_on_error
762 and FailJobOnError in RunScripts.
763 kes Minor tweaks of code formating in RunScripts, principally to
764 avoid depassing 80 columns.
766 kes Eliminate one #ifdef Win32 in bsmtp
767 kes Implement grow tool to grow a file for testing very large databases.
768 kes Add big-vol-test to test Bacula seeking with > 5GB.
771 kes Modify find_next_volume() to return all values in Media record.
772 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
776 kes Update Release notes
778 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
779 Warning, in previous beta version, all media get from scratch keep their
782 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
783 This should fix bug #842. Made a note to look at removing the temp
784 files at the end of the install.
785 kes Add ability to mount and unmount a file device providing it is
786 marked as being removable and has the appropriate mount and unmount
787 commands defined in the Device resource. This fixes bug #830.
788 kes When applying a storage override, release all previous storage
789 definitions rather than just prepending the new storage.
790 This should prevent a good deal of confusion.
792 kes Implement ./configure search for qwt libraries.
794 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
795 Win32 FD. This should fix bug #893.
796 kes Remove an unnecessary beep in Win32 init code.
797 kes Update copyright dates in Win32 executable about boxes.
798 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
799 code with a BSD getopt.c and getopt.h.
800 kes Remove sched.h from the Win32 compat directory -- not used.
801 kes Remove the Exit menu item from the Win32 tray monitor. If you really
802 need to shut it down, do it through the services panel or the command
804 kes Remove some inappropriate Bacula FSFE copyrights.
805 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
806 kes Fix regress config non-portable test as pointed out by
807 Florian Heigl <florian.heigl@gmail.com>
808 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
809 as pointed out by Florian Heigl <florian.heigl@gmail.com>
811 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
812 Reported by Frank Sweetser.
816 kes Fix client-only build.
817 kes Integrate client-only fixes for bsys (initgroups) and conio from
818 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
819 kes Make arguments to get_scratch_volume() in same order as other
821 kes Rework the prune_volumes() subroutine so that after purging and
822 no volume found in desired pool, it will check for a scratch
823 volume. This prevents recycling the whole scratch pool.
824 kes Add code to status storage to print boffset_t (largefile support).
826 kes Move qwt (Graphics libarary for Qt4) to depkgs.
827 kes You now need a --with-qwt=<dir> to be able to build bat.
828 kes Update src/win32/cats/bacula_cats.def to include the new
829 db_get_query_dbids() call on Win32.
831 kes Correct a problem when selecting a scratch volume and moving
832 it to another pool that lost some columns.
833 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
834 kes Enhance Autochanger error messages to include Volume and device name.
835 kes Rework prune_volumes() code to take account of InChanger flag,
836 and to handle recycling volumes going to the Scratch pool and
837 current pool because the RecyclePool directive.
838 kes Implement a better and more efficient db_get_query_dbids() to
839 handle creating and passing back a list of DBIds.
843 kes Start work on new more efficient DBId subroutine. First use
844 will be for recycling volume to Scratch inchanger.
845 kes Increase number of JobIds in pruning from 1000 to 10000.
846 This to be replaced by above routine.
847 kes Begin implementation of building Qt4 on Win32.
848 kes Correct typo in fix I added for bad TLS shutdown.
849 kes Pull 2.0.3 patches into patches directory.
850 kes Update Release notes. Include qt-console in line count.
851 kes Update Projects file.
853 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
854 bug in migration code where a job that spanned two volumes
857 kes Implement new BST_DESPOOLING blocked state. Change from locking
858 during despooling in SD to blocking. This means that other threads
859 can work with the device structure, in particular the reservations
860 system while despooling.
862 kes Fix return in reservation message queue that missed clearing
863 the jcr lock (implemented 26Jun07 below).
864 kes Rename a number of dev methods to make locking function names
866 kes Document locking in lock.c. Move lock structures to new file
869 kes Move reservations message lock to lock jcr only this
871 kes Move main SD locking code into lock.c (new file).
872 kes Update Win32 build to include lock.c
876 kes Dirk committed the qwt library code for drawing graphs in bat.
877 kes Tweak install of qwt so that it is integrated with ./configure.
879 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
880 out by Eric (my typo).
881 ebl Fix configure.in to get batch mode enable
882 kes Return correct string from authenticate.cpp in bat when connecting
884 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
885 spurious line drops when using TLS.
886 kes Do not file reparse points when restoring a file that already
889 kes Implement Windows reparse points -- similar to directories, but
890 we do not descend into it. This is a first cut. They seem to
891 be backed up, but restore is not yet tested.
892 kes Remove restore_blocking in tls code when shutting a socket to leave
893 it in blocking mode. Hopefully this will fix the encryption bug
894 reported by Frank Sweetser.
895 kes When opening a file for backup, tell the OS that we are going to
896 read it sequentially -- optimization.
897 kes Change variable names in authenticate_director() to not conflict
898 with member names in bat. Caused great confusion with compiler,
901 kes Queue openssl error messages in case of comm problem.
902 kes Do shutdown() call if socket terminated.
903 kes Remove some duplicated code in tls.c
904 kes Move more of the bsock member variables into private and access
906 kes Add Frank Sweetser's tls-test to the regression suite.
908 kes Add Swedish sv.po file
910 kes Don't print clock skew message in FD if less than 3 seconds diff.
911 kes Add a bit of VSS info to status client.
912 kes Implement a first cut of Vista VSS, using Win2003 code.
916 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
917 loaded tape but uses first drive).
918 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
919 This was indeed a Win32 issue.
921 kes Simplify search of autochanger for in-use Volume.
922 kes Fix exit condition of check for in-use volume. kes Remove
923 inappropriate my_postgresql_free_result() in db_close()
925 kes Fix bad return in FD when encryption signature not found.
926 Probably caused a crash.
927 kes Inhibit missing encryption signature error messages for
928 file types where no signature computed.
929 kes Correct inverted check on autochanger in reservation system.
930 kes Tweak debug code in autochanger reservation.
932 kes Add some additional locking in the cats directory in subroutines
933 that modify packet variables called from batch insert.
934 kes Rework how dcrs are allocated. new_dcr() can now be called
935 with an existing pointer, and it will simply clean it up.
936 This allows the reservation system to test various different
937 devices, and will permit easy device changes.
938 kes A bunch of changes all over to handle new new_dcr() calling
940 kes Work more on the Volume management in the SD. Remember Volumes
941 for tape drives and for autochangers (even virtual disk changers).
942 kes When looking at the Volume list to reserve a drive, handle
943 autochanger names correctly by interating through the changer
944 devices. Also call the Director to see if a Volume is suitable
946 kes Fix some bugs in bscan. Make sure all media records are written.
947 Make sure that valid JobMedia records are written for disk files.
948 Previously they were completely wrong.
949 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
950 that the URLs don't change and so that the developers will all
951 work off the same copy. Rebuild from scrach.
952 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
956 kes Fix seg fault in FD from incorrect digest size.
957 kes Fix argument to non-OpenSSL crypto.c subroutine.
961 kes Remove a few malloc()s from the encryption code.
962 kes Use the class calls to bsock in filed/backup.c and restore.c in
963 place of the old bnet_xxx code.
964 kes Implement code that does an on the fly calculation of the
965 signing digest during restore of encrypted files. It makes
966 a best guess at the algorithm, and if it is not correct, will
967 then revert to the old code which reads the file after it is
969 kes Implement at least one missing crypto stream in stream_to_ascii()
970 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
971 #877 where a reload with bad syntax causes Dir to exit.
973 Cut: 2.1.14 beta (not released)
975 kes Do not free a volume on a tape drive until another volume is
976 mounted and read, or the autochanger unloads the volume.
977 This should help the SD re-use volumes that are already mounted,
978 and should fix bug #886.
979 kes Apply patch from user brettedgar that allows gnome2-console include
980 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
981 kes Apply patch from Lucien Weller that fixes day of week calculation
982 because of DST flag problem. Fixes bug #887.
984 kes Move find_next_appendable_volume() to after acquiring a valid device
985 in reserve.c. This fixes bug #864 -- confirmed by reporter.
987 kes Unable to reproduce bug 872. However added additional testing for
989 kes Bug #874 resolved by documenting SQLite limitations.
990 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
991 kes Bug #881 resolved by removing typo in mtx-changer script.
992 kes Made Frank Sweetser's wiki the official Bacula wiki with his
993 approval. Added a link to the wiki on the web page, and implemented
994 a backup from http://paramount.ind.wpi.edu
996 kes Fix update allfrompool to pass pool name.
998 kes Convert to pure GPL v2 license.
999 kes Fix sscanf problems reported by Peter Buschman that caused
1000 a bus error on Solaris.
1001 kes Rework (simplify) the select prompt in bat.
1002 kes Move get_jobid_from_tid() into lib and create a
1004 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1005 should definitely fix the problem of lost error messages in the
1007 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1008 kes Eliminate tcpd.h from the project. Enclose the #include from the
1009 library with extern C ...
1010 kes Add print of signal name when a signal is trapped.
1012 Release: 2.1.12 beta
1014 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1016 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1017 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1018 makes SQLit3 run 30 times faster, though a bit less safe.
1019 kes Implement --with-batch-insert in configure and detection of thread
1020 safe libraries. It is on by default, but turned off if no thread
1021 safe library (e.g. SQLite 2) is available.
1023 kes Fix Bacula PostgreSQL buffer overruns.
1024 kes Do better checking for NULL results returned from PostgreSQL;
1025 implement retry for failed queries; clear results buffer after
1026 failed query. Hopefully this will correct the PostgreSQL failures.
1028 kes Implement algorithm to handle only one appendable volume with
1029 Prefer Mounted Volumes = no.
1030 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1031 returned from a query.
1032 kes Make volume lock recursive.
1033 kes Implement an additional volume reservation algorithm that
1034 starts by considering all reserved volumes then uses the
1035 old brute force algorithm of searching the resources to
1036 find a suitable device.
1037 kes Add new reservations debug code and refine the old code.
1038 kes Update the win32/dll/bacula.defs file.
1040 kes Tweak reservations algorithm to permit a few more cases, i.e.
1041 volume reserved, but on different drive, ...
1042 kes Enhance SD status to include Pool and Media Type for drive in a
1043 more readable format (a bit longer).
1044 kes Fix PostgreSQL double free.
1046 kes Minor refactoring of restore decryption code.
1047 kes Add code to smartall.c to detect double free of a buffer.
1049 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1050 so that bsmtp will create a correct email address (mailbox only).
1051 kes Modify 'memory' command so that the buffers are listed as 'In use'
1052 to avoid confusion with Orphaned buffers.
1053 kes I reworked the OpenSSL include/lib flags to be handled in
1054 the standard Bacula way, which should fix bug #863 concerning
1055 non-standard OpenSSL libraries.
1057 kes Implement Help Browser window for bat.
1058 kes Fix reload bug that reset StorageId to zero.
1060 kes Fix TLS #ifdefing when TLS turned off.
1061 kes Ensure that when labelling a tape with Slot=0 that InChanger
1063 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1065 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1066 add DISTINCT (required by PostgreSQL).
1067 kes Implement BSOCK authenticate_director() method. Eventually will
1068 authenicate all daemons.
1069 kes Move several more functions into the BSOCK class.
1071 kes Add code to tell the OS that we no longer need a cached
1072 file that we were reading. In findlib/bfile.c. Also,
1073 only cache files that we are reading. Thanks to
1074 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1075 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1076 kes Implement script to automatically generate cats and dll .def
1077 files for Win32 dll.
1078 kes Update README.mingw32 to include new .def file generation.
1079 kes Correct typo in UTF-8 error message as reported by:
1080 jhernandez <julianhernandez@gmail.com>
1081 kes Add additional sm_check() code on debug level 1.
1082 kes Set default debug level to 1.
1083 kes Trap SIGABRT in attempt to get traceback.
1085 kes Reduce bat connect timeout from 30 to 15 seconds.
1086 kes More restructuring and implementing BSOCK class in place of
1088 kes Remove a few unnecessary malloc() tests in crypto code.
1089 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1090 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1091 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1093 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1095 kes Fix Verify InitCatalog. The attributes were not pointing to the
1096 correct saved location.
1097 kes Implement message callback so that GUI is sure to get all
1098 daemon messages. Currently displayed in a dialog in bat.
1099 kes Ignore SIGUSR2 (Bacula timer) in bat.
1100 kes Apply regress patch from bug #859 to allow regress to work
1101 with Solaris compiler.
1103 kes Begin adding TLS support to bat.
1104 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1105 clean up lex.c and make it more readable.
1107 kes Move more bnet functions into the BSOCK class.
1108 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1109 kes Complete change of berrno strerror() method to bstrerror()
1111 Release: 2.1.10 beta
1113 kes Cleanup incorrect email addresses in bsmtp.
1114 kes Make bat display initial messages rather than discard them.
1116 kes First cut of adding .mod to the run command.
1117 kes Implement auto display of messages in bat.
1118 kes Enhanced preferences to allow all Bacula output to be
1121 kes Try to make bsmtp date routines more generic.
1122 kes Fixed bug #856 autochanger documentation.
1123 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1124 kes Add new cats entry point so Win32 builds.
1126 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1128 kes Do better checking for the MySQL 64 bit libraries looking for both
1129 .a and .so libraries.
1130 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1131 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1132 kes Require the thread safe version of MySQL during configure. Thanks
1133 to Andre Noll for pointing this out.
1134 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1135 continuing in migration code.
1136 kes Apply implementation of tray-monitor font derived from gnome-console
1137 submitted by Andreas Piesk <a.piesk@gmx.net>
1139 kes Eliminate important memory loss in SQLite
1140 kes Fixed the batch insert MySQL thread specific data that was not
1141 being freed. See cats/mysql.c:db_thread_cleanup().
1142 kes Fix restore before command.
1143 kes Convert old hdr.name to name() in a few places.
1144 kes Implement update jobid command.
1145 kes Return all time_t dates in db_get_job_record()
1146 kes Stop watchdog in SD earlier.
1147 kes Put Pool just after Storage in please mount message.
1148 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1151 kes Update the po files.
1152 kes Fix Verify InitCatalog by making it cache attributes.
1154 kes Change name bacula-bat to bat for man 1 page to correspond to
1156 kes Check for client and store NULL pointers in status command. This
1158 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1159 kes Fix sign extended editing of %p.
1160 kes Clean out a little old #ifdefing in cats/mysql.c
1162 kes If time diff between DIR and FD is more than 600 seconds convert
1163 INFO message to WARNING.
1164 kes Implement heap size display in status for all daemons.
1165 kes Attempt to fix MySQL db open memory loss (not successfull).
1166 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1167 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1168 Query. This looks like a MySQL but but by doing extra releases,
1169 the memory goes away. This should fix bug #847.
1171 kes When backup fails, cancel SD before waiting for sd termination.
1172 kes If SD is waiting for FD to connect during cancel, wake up the
1174 kes Fix fsf code so that errno is correctly reported.
1175 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1177 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1178 so that Bacula doesn't later stumble into a seg fault.
1179 kes Use the term Restore Client in the restore Job report.
1180 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1181 the original job's FileSetId.
1182 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1183 spooling in migration jobs. Not yet tested.
1184 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1185 reading conf file from a pipe. However, do it with open_bpipe()
1186 rather than popen. Not yet tested.
1188 kes Fix an ugly bug where the VolCatBytes were getting updated
1190 kes Implement bconsole memory command that prints current memory
1191 usage, plus smartalloc dump.
1192 kes Clarify some error messages in backup, admin, and migrate.
1193 kes Shrink label dialog to smaller size.
1194 kes Invert Cancel OK buttons on restore to be OK Cancel.
1195 kes More strerror() to bstrerror() conversions.
1197 kes Start implementing bstrerror() in place of strerror().
1198 kes Stripping path -- seems to work.
1200 kes Prevent door and port files from being restored (mostly
1202 kes Free an unreleased buffer in compat code.
1203 kes Change console Job name from *Console* to -Console- to eliminate
1204 Win32 filename problems. Put Win32 path separator when creating
1205 Console file. This fixes bug #846.
1206 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1208 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1210 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1211 to force Win32 error message.
1213 kes First cut strip path. The data should be passed to the FD,
1214 but nothing is done with it yet.
1215 kes Enhance the digest and signature routines in the crypto
1216 library to accept a JCR and to use it to print error messages
1217 so that they will go in the Job report rather than the daemon's
1219 kes Simplify some of the verify signature code.
1220 kes Simplify a few of the alternative returns in the signature
1223 ebl Use only POSIX regex instead of GNU regex in breg.c for
1224 File relocation. It fix broken freebsd compilation.
1225 kes Convert all other Dir files to use new ua class message
1227 kes Tentative fix for missing digest signature in bug 807.
1228 kes Correct handle problem in new win32_ftruncate routine.
1229 kes Convert ua_purge.c and ua_update.c to use new ua class
1230 message routines for bat.
1232 kes Correct incorrect installation of LICENSE in Win32 installer.
1233 kes Display LICENSE at the beginning of the Win32 install.
1234 kes Attempt to correct the need for the png files to be installed
1236 kes Reapply my bat.conf install script in qt-console. I think I
1237 editted bat.pro instead of bat.pro.in and it was lost.
1238 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1239 the /var/lock/subsys for subsysdir. Also corrects typos in the
1242 kes First cut update job.
1243 kes Correct configure to include qmake of src/qt-console directory.
1245 kes Make restore job yes/mod/no print in one command so GUI works.
1246 kes First cut implementing backup and restore client.
1247 kes Correct editing in Verify output that caused a seg fault.
1249 kes Insure that bat.conf is not overwritten during installation.
1250 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1251 while I was implementing migration in March 2006 !
1253 ebl Cleanup file relocation, using char *RegexWhere instead of
1254 char *where + bool where_use_regexp
1255 kes Update some manpages and add bat manpage.
1256 kes Make a first cut at converting bacula.spec.in for bwx-console
1258 kes Apply patch from John Goerzen to add hostname as fourth argument
1259 to make_catalog_backup script.
1260 kes Fix typos I introduced into bsmtp.c
1261 kes Make pm_strxxx() routines handle input of NULL pointer. This
1262 is to protect from NULL pointers returned from SQL databases.
1263 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1264 kes Add more debug to FIFO code -- fix fifo regression test.
1266 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1267 kes Add thread timer to bnet_connect() to break from OS if wait time
1270 kes Update Win32 build to include new files, new symbols, and
1272 kes Implement socket level heartbeat (tcp_keepidle)
1273 ebl Commit File relocation patch
1274 kes Make bat have 'make install' target.
1275 kes Warn during install if old gnome-console binary found.
1276 kes Warn during install if old wx-console binary found.
1277 kes Add -8 option to bsmtp command line to add content type utf-8.
1278 Fixes bug #809. (Character coding problem in bsmtp).
1279 kes If < is found in target (from, to, cc) then do not enclose the
1280 target in < > in bsmtp. Fixes bug #772 (malformed address).
1281 kes When printing certain items in dbcheck, stop after 300000.
1282 Fixes bug #822. (dbcheck loops).
1283 kes Incorrect status in Dir after waiting for mount with poll set.
1286 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1288 kes Print waiting to reserve a device every 5 mins.
1290 kes Don't call close_part in label.c if tape and relabel.
1291 kes Don't free volume if busy in close() -- should help with
1293 ebl Fix #824 RunScript bug (After script could be execute twice)
1294 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1295 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1296 Add a regression script to test RunScript
1298 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1301 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1302 deprecated. No additional bugs will be fixed, and they will be dropped
1303 in a future release (probably 2.4.0).
1304 kes Change name of wx-console to bwx-console to make it more Bacula
1306 kes Change the name of gnome-console to bgnome-console to make it
1309 kes Some time in March, a Feature Request with patch from Jorj Bauer
1310 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1312 The ability for the director to validate a Client (FD) CN against
1313 an arbitrary set of patterns rather than the hostname, with
1314 A new 'TLS Allowed CN' set of directives which are implemented
1315 in the Client resource. Then pattern matching is used in place
1316 of hostname matching against the Certificate's CN. As an example, we
1317 have certificates which (a) use a local CA, and (b) have a CN of the
1319 kes Add new/changed entry points to Win32 build
1320 kes Create unaccepted-projects for projects that are not accepted.
1321 kes Simplify locking in the reservations system.
1322 kes Add more debug code in reservations.
1323 kes Make sure error condition on reserving a volume is handled correctly.
1324 kes Correct handling of volume_in_use.
1325 kes Correct handling of initializing a device.
1326 kes Move handling of broadcasting releasing a device into release_device().
1327 kes Correct attaching dcr to dev so that it is only done if device
1328 is properly initiated.
1330 kes Locking debug level tweaks in SD.
1331 kes Tweak new Volume code.
1333 kes Add exec external-command [wait-seconds] to bconsole. This
1334 executes the external-command. Note! normally external-command
1335 should be enclosed in double quotes.
1336 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1337 it should normally be off in a production system.
1339 kes Implement die command for SD so that we can force it to dump.
1340 kes Implement SD lock debug code.
1341 kes Implement new algorithm for keeping Volume list in SD. It
1342 is now owned by the device.
1344 kes Implement new code for freeing in use volumes that should
1345 resolve if not all, some of the problems of multiple drive
1346 tape conflicts described in bug 801.
1348 kes Fix gui/bacula-web/images files in svn.
1349 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1351 ebl Fix a bug in batch mode (in string escape)
1352 kes Correct migration prune SQL typo that crept in in a
1353 recent 2.1.x change.
1355 kes Move bnet_despool() into class in bsock.c
1356 kes Modify job report to include director name and Build OS.
1357 kes Move drop root privilege and check_catalog() before fork.
1358 kes Add update database scripts (version 9 to 10) to updatedb directory.
1360 ebl Check size and age of each file after its backup to see if
1361 it has changed during backup, if 'checkfilechanges' is set.
1362 The FD will do an extra check (stat(2)) after
1363 each file backup. mtime, ctime and size are compared with
1364 'before backup' information. If time or size mismatch, an
1365 error message will be generated. You must upgrade FD to use it.
1367 kes Make database name and user configurable
1368 --with-db-name=xxx --with-db-user=xxx
1369 kes Add back database type to message.c for debugging.
1371 kes Implement dir_sql() which issues an SQL query.
1372 kes Modify bat medialist to use dir_sql() and do some minor C++
1373 formatting as well as eliminating a number of pointers, simplifing
1376 kes Fix some of the mtx-changer grep commands for tape label readers.
1377 kes Convert a number of bsendmsg into the appropriate send/warning/error
1378 message class calls.
1379 kes Suppress the using database message in the .sql command.
1380 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1382 kes Add context menu for floating a window.
1383 kes Some minor cleanup and name changes in qt-console
1384 kes Add doing mt setblk 0 in Win32 mtx-changer.
1385 kes Apply Martin's bug fix to move definition of ENODATA for
1387 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1388 sqlite2 and sqlite3.
1390 kes More pruning cleanup.
1391 kes Turn on wait_for_drive by default in mtx-changer.
1392 kes Turn on Batch insert code by default as it now passes regression.
1393 kes Add ./configure --enable-bat to enable building of Bat.
1394 No install yet though.
1396 kes Implement a new .sql command for bat.
1397 kes Implement code to turn off pruning in obtaining the next volume.
1398 Pruning is turned off for the status dir command, but turned on
1399 for SD requests and for the list nextvolume command.
1401 kes Correct Qmsg() that was not updated correctly when committing a
1402 previous change (probably the recent TLS patch).
1404 kes Write new subroutine is_volume_purged() that explicitly checks
1405 if the Volume is purged, and if so marks it as such. This should
1406 resolve problems reported about needing to mount twice to recycle
1408 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1409 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1410 amount of duplicated code.
1411 kes Do volume pruning only for the Media Type desired (reduces pruning time
1412 if multiple Media Types are in the same pool).
1413 kes Implement more detailed info in the Job report for the Bacula version
1415 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1417 ebl Add bbatch tool to bench database and insert mode.
1418 Fix sql quote stuff in batch mode
1419 Fix sql stuff for mysql
1421 kes Correct problems with am/pm scheduling. Fixes bug #808.
1422 kes Implement new prunning code that prunes up to 1000 jobs at
1423 the same time. The same technique can be applied to a number
1424 of other prune/purge subroutines.
1425 kes Add an insanity check when starting a new tape job to ensure
1426 that the tape position has not been changed. If so fail the
1428 kes Fix Win32 build for dlls to add the folllowing:
1429 src/lib/bsock.c -- new file with new entry points
1430 src/lib/dlist.c -- new entry points
1431 src/cats/sql_create.c -- new entry point
1432 src/cats/sql_cmds.c -- new DATA item exported
1434 ebl batch mode cleanup bscan-test is ok now.
1435 kes Implement SD code to check length of disk volume before appending.
1437 kes Correct return status on db_batch... routines.
1438 kes Add call to db_write_batch_file_records() to migration code.
1439 ebl Fix AfterJob timing
1440 kes Move the checking of the database in initializion of the Director
1441 to after we drop privileges. This avoids the need for both root
1442 and bacula access to the DB.
1443 kes Correct a misplaced variable definition in src/filed/backup.c
1444 kes Correct how the new batch insert db_create_attributes_record()
1445 uses the arguments. Caused a seg fault in bscan.
1446 kes Implement lock() and unlock() methods in DEVICE class.
1447 Implement block() and set_block(xx) methods in DEVICE class.
1448 kes Modify bnet_connect() so that it uses time() to check for the
1449 wait time expiring (on some OSes, some system calls may not
1450 return immediately).
1451 kes Modify Verify to obtain the previous JobId when it is actually
1452 running rather than at schedule time (as it was in 1.38.x).
1453 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1455 kes When checking pid in pid file, continue running if the pid is
1456 the same as ours. This occurs on IRIX after a system crash.
1459 kes Extend new GUI API.
1460 kes Make the ua structure a class, and implement send_msg(),
1461 error_msg(), warning_msg(), and info_msg().
1463 kes Apply fix from for building wx-console on the Mac from
1465 kes Implement new select mechanism for GUI programs.
1466 kes Reorganize initialization of stackedWidgets in bat.
1468 kes Add updated nagios plugin supplied by Christian Masopust.
1470 kes More bat implementation.
1471 kes File migrate bug with Pool Occupancy using mediaid instead
1472 of jobids. Fixes bug #795.
1473 kes Fix orphaned buffers in filed backup and verify due to
1474 crypto buffers not freed during errors. Fixes bug #789.
1475 kes Extend new GUI api code to tree commands.
1476 kes Ensure that tree and dot commands check console ACLs.
1477 kes Permit marking directory with trailing slash.
1478 kes Allow 20 console connections (instead of only 10).
1480 kes Add smartctl call to bacula-sd.conf as an example of getting
1483 kes Modify jobq.c to let simultaneous restore jobs run. This may
1484 cause them to fail if they cannot get a drive.
1485 kes Add Client Connect Wait to Storage daemon to permit users to
1486 modify the time the SD waits for a FD connection.
1488 kes Correct virtual changer check which was backwards. This caused
1489 volumes to be unloaded into slots already occupied.
1491 kes Apply Command ACL filter to JobId list in restore command.
1492 kes Correct typeo in var.c patch.
1494 kes Don't let Bacula prune File or Job records for the current Job.
1495 kes Fix variable substitution pad + inc bug reported (with patch)
1498 kes Correct SQLite log table index as reported by Luca Berra.
1500 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1502 kes Begin implementing new comm signals for API.
1503 kes Fix a few places in lib/message.c where the open fd may
1505 kes Continue implementing lib/bsock.c (real class). Make jcr,
1506 who, host, and port private. There are new methods to access
1507 them for non-class use. This required touching a number of files.
1509 kes Add LANG=C to autoconf/randpass so it works with languages other
1510 than English. Fixes bug #788.
1512 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1514 You will not be able to generate Include/Exclude list any more.
1515 It will be fixed soon.
1516 If you want to use this, you can apply
1517 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1519 kes Restore of sockets created false error messages because Bacula
1520 no longer restores sockets, but the code was still trying to
1521 set the attributes on a non-existent file. Reported by a user.
1522 ebl finish RecyclePool feature
1523 Media will takes Pool.RecyclePool
1524 when moving from Scratch to a Pool or when user will do
1525 update volume=xxx frompool
1526 To use it, add RecyclePool = aPool to your Pool resource
1529 RecyclePool = Scratch
1533 kes Expand new BSOCK class adding signal() and new BNET signals.
1534 kes Begin enhancing the dot commands adding a new API function
1535 that returns more information and will make it easier
1536 to interface to the Director from a program.
1538 kes Make DEVICE fd private. Its new name is m_fd, and can be
1539 obtained with dev->fd() outside the class. This is the
1540 first of many DEVICE members to be made private.
1541 kes Implement Michael Renner's idea on having a virtual disk
1542 changer. I made some minor modifications (e.g. I did not
1543 implement the Virtual Changer directive, but simply set
1544 the Changer Command to an empty string.
1546 kes Implement a BSOCK send() method that writes the whole record
1547 in a single write() request rather than in two.
1548 ebl add update volume=xxx recyclepool=yyyy
1549 volume takes recyclepool from pool when using update volume=xxx from pool
1551 kes Fix encryption deblocking bug, which caused some restored files
1552 to be truncated. This fixes bug #763.
1553 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1554 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1556 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1557 ebl Use btime_t instead of uint64_t in media patch.
1559 kes Optimize the use of the database a bit in the Status dir command.
1560 Only open it when needed, ensure that if any previous database
1561 was opened, it is closed.
1563 kes Correct VolCatBytes bug from media patch.
1564 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1565 in the case of orphaned records.
1566 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1567 and File records in 300K chunks to be more efficient. This
1568 idea came from Juan Luis Frances (if I remember right).
1569 kes Apply Eric's scratch patch that moves a purged Volume to
1570 the RecyclePool. Question: how is RecyclePool set? what
1571 happens to the ScratchPool?
1572 kes Apply Eric's media patch that collects read/write media
1573 times as well as byte counts. This patch requires a
1574 simultaneous upgrade of the DIR and SD. Note, there
1575 should be some way to turn off timing. I'm not sure
1576 times are in Bacula units.
1577 kes Apply Eric's batch-insert patch.
1579 kes Update projects list.
1581 kes Implement Include/Exclude file lists in FD as dlists using
1582 the new dlistString class. This permits efficiently having
1583 large include/exclude lists and completes project Item 25.
1584 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1585 console is authorized to cancel the job. This fixes bug
1587 kes Modify SD so that the VolCatJobs medium record is updated
1588 at the beginning of a Job rather than the end. This
1589 fixes bug #775 where exceeding MaxVolJobs caused jobs
1591 kes Added a mutex around getting and setting Volume information
1592 so that multiple simultaneous jobs will single thread.
1594 Switch to using Subversion
1595 kes Remove src/pygtk-console/ from configure
1597 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1598 plus the entrypoints.
1599 kes Apply patch supplied that corrects debug print
1600 in canceling jobs for max run time. Supplied as
1601 part of bug #621, which was previously fixed.
1603 kes Test on job_canceled() and sd_msg_thread_done inside
1604 loop starting the message thread to avoid a race condition.
1606 kes Remove rl_catch_signal from console.c as it conflicted
1607 with the header definition. Fixes bug #765.
1608 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1610 kes Clarify some stored/acquire messages to indicate if the
1611 problem is with read or append.
1613 kes Fix memory leak with storage ids in cats/sql_get.c
1614 kes Terminate watchdog earlier to avoid reference to released
1615 memory -- reported by Jason Austin.
1616 kes Move closing the database from jobq.c to the director daemon
1617 termination routine. This fixes memory leaks for shadow jobs
1618 (i.e. migration jobs).
1619 kes Free up the unique jobid chain items in migrate.c. This fixes
1620 a memory leak problem.
1621 kes Convert some ugly looking for statements to use foreach_alist
1622 in findlib/find.c. This will facilitate converting the structures
1623 to use dlist (for large include/exclude lists).
1624 kes Fix a bug in the btree.c and btree.h routines, then rename them
1625 rblist and add them to be built in src/lib. Include some new
1626 methods written by Rudolf Cejka that make the code more readable
1627 (hides some of the ugly casting).
1628 kes Add set_next() and set_prev() methods which make the code much more
1629 readable. Also add a new dlistString class that facilitates storing
1630 strings in dlists. To be used in the large include/exclude lists.
1631 kes Make some trivial modifications to lib/tree.h that use rblist
1632 rather than dlist for storing the tree links. This was suggested
1633 by Rudolf Cejka. The result of this is that the restore tree now
1634 uses red-black binary trees rather than simple linked lists. This
1635 should give rather dramatic speed improvements for directories
1636 contining large numbers of directories/files (more than 10000).
1638 kes Fix maxruntime bug #621.
1640 ebl Implement the include JobID in spool file name project.
1641 kes Reorder projects file in order determined by Jan 2007 vote.
1642 kes Implement item #12 on project list -- quick release of FD by
1644 kes Fix open of SQLite3 db where user does not have write permission
1645 so that DIR does not crash. Fixes bug #761.
1647 kes Add back missing @ in Win32 Makefile.
1648 kes Change 'Device not configured to autolabel' from INFO
1650 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1651 which should restart an indefinite # of times.
1652 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1653 other DIR specifications.
1655 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1656 Fix path quoting in SQLite scripts.
1657 Fix problems with SHGetFolderPath.
1659 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1661 kes Fix Job restart on error bug that promotes an Inc to a Full
1662 backup. This should fix bug #755.
1663 kes Add qt-console and first cut of code.
1667 kes Fix Bacula->Documentation link on Win32 to point to index.html
1668 instead of bacula.html. Fixed bug #750.
1669 kes Return JobId in db_get_job_record() when JobId==0. This should
1671 kes Do not release source pointers when restarting a failed job.
1673 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1674 This *should* fix bug #747.
1675 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1678 kes Modify USTORE constructor to set an empty store_source string,
1679 and don't copy the store_source string in a cancel. Hopefully
1680 this will fix Arno's seg fault, bug #744.
1681 kes Add back code to disable conio in configure. Fixes bug #743.
1682 kes Correct the Options scanner in the FD to correctly handle
1683 SHA1 option, which was eating the next option. Reported by
1685 kes Add code to indicate when the SD is spooling, spool wait, and
1686 despooling as requested by Alan Brown.
1688 Version 2.0.0 released: 4 January 2007