1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Display open() errors except when polling. Previously too
29 many were suppressed. This should fix bug #1070.
30 kes Fix Win32 reparse points. Bacula will not recurse into any
31 reparse point directory, including mount points, unless the
32 directory is explicitly mentioned at the top level (same as
33 with Unix). A file that is linked to another file will be
34 backed up -- much as Unix does for hardlinked files.
37 kes Remove double quotes from ChangeLog and ReleaseNotes
38 kes Remove StorageId test when pruning and recycling (Eric's changes).
39 kes Remove old form of locking when getting volumes -- causes deadlock.
40 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
41 the name unique and to eliminate compile time error.
42 kes Add accurate.o to Win32 FD Makefile
44 kes Fix cats dll build on Win32 after db_update_job_end_record
45 calling sequence change.
46 ebl Switch to tokyo dbm instead of htable in accurate code
47 ebl Include tokyo dbm to bacula source tree
49 kes Fix buffer overruns detected by Coverity.
51 kes Tweak joblog display.
53 kes Implement --without-qwt
54 kes Fix layout of restore tree dialog
55 kes Add configure bat QWT libraries, so that bat can be built
56 with or without the QWT libaries.
58 ebl Add dummy tape driver for regression tests.
59 kes Make sure we unload the right slot when swapping.
61 kes Add debug times, reduce size of two-pool-changer test
63 ebl Tweak autoconf scripts for faketape
65 kes Improve SD reserve debug code.
66 kes Testing an improvement to free up volumes no longer in use.
68 kes Rework SD acquire for read to handle autochanger Volume
70 kes Implement regression that explicitly tests swapping a Volume
71 from one drive to another.
72 kes Enhance disk-changer to detect most error conditions.
73 kes Fix SD code so that it properly swaps a Volume between drives.
76 kes Apply libdbi patch from Joao Freitas for regress and for
77 Bacula trunk. Regress now works with libdbi. Nice.
78 kes Apply .nobackup patch from bug #1077 submitted by
80 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
81 name into jobs cloned via the run directive.
83 kes Prevent a Volume that is being swapped from being freed from
84 the volume list. This will most likely fix, at least partially,
86 kes Fix strippath so that it does not get a buffer overrun and crash FD.
88 kes Remove 50 millisec wait in SD that broke debugger.
89 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
90 that a job may run, counted from when the job was scheduled.
91 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
92 a job may block waiting for a resource, counted from when the job starts
93 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
94 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
95 that implements multiple commands per line in the console when using
96 readline. Modify the default to use a semicolon as the command separator.
98 ebl Fix SQL query in migration code.
99 ebl Make accurate mode with hash disk pass regression tests
101 ebl Implement first cut of accurate backup with hash disk.
103 kes Force unload of volume when wrong volume mounted in SD.
105 kes Fix bat seg fault at termination.
106 kes Add Bacula generated version to bat about box.
109 kes Experiment with allowing multiple read jobs.
110 kes Move final volume swapping code to DCR method and
111 call it from acquire_for_read().
112 kes When wrong volume is mounted during read, unload_autochanger.
114 kes Integrate the libdbi changes from Joao Henrique Freitas
116 kes Stop searching for Volumes in SD askdir if DIR returns the
117 same volume name twice in a row.
118 kes Close bat console windows first to eliminate error message
121 kes Tweak the swap Volume from one drive to another code so that
122 it now seems to work.
123 kes Resolve several problems with recycling that broke the new
124 code (these problems are in 2.2.9 as well).
125 kes Remove the volume lock when calling the sysop code.
126 kes Don't mark a reserved volume with no writers as unused otherwise
129 kes Rework class structures for VOLRES, DCR, and DEVICE to make
130 the method names a bit more logical, and for more logically
131 handling the responsibilities.
133 kes Remove redundant code in terminating the scheduler that just
134 causes a seg fault in many cases.
135 kes Cleanup releasing a volume and make it a DCR method.
136 kes Improve algorithm for detecting pre-reserved volume and
139 kes Tweak volume swapping code so it works.
140 kes Correct name overloading in mount.c
141 kes Replace released flag in VOLRES with reserved and add access
142 methods for the VOLRES class.
143 kes Prevent volume from being released while being swapped.
144 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
146 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
148 kes Refactor parts of stored/mount.c
150 ebl Add sanity checks for VolWriteTime and VolReadTime
151 ebl Take care of bad clock changes while computing VolWriteTime
152 and VolReadTime. This should fix or limit #1066
153 kes Correct error string numbers in dird/catreq.c
154 kes Restructure reserving, acquiring, and mounting volumes. Calls to
155 autochanger are deferred for mount.c -- simplifes the code.
157 kes Do not prune any running job. It just fails the job.
158 kes Lock the volumes when changing dev->reserved_device and marking
159 the volume unused otherwise the device can get reserved by
160 another job before the volume is released, thus blocking it.
162 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
163 kes Fix bug #1063, reuse of freed ptr in list nextvol.
164 kes Release regex compile buffer in filed/job.c
165 kes Add proper type of const char in sql_create.c
166 kes Turn off debug in daemon termination routines
167 kes Move free_volume_list() before devices are freed in stored.c
168 kes Fix reference to uninitalized stack variables in bregex.c.
169 This should correct bug #1067.
171 kes Fix possible seg fault in SD when freeing a volume entry.
173 kes Implement unload_dev() before swap device.
174 ebl Add statistics prunning with option and menu
175 kes Separate unload_dev() from unload_other_device() in autochanger.c
177 kes Apply patch from bug #1069 that corrects spurious error messages
178 when ACLs enabled on SGI but no ACL exists.
179 ebl Fix small segfault in bacula-sd when debug level is 500
180 kes Modify run_program() and run_program_full_output() to use
181 call by reference for the results string. This corrects a long
182 standing problem where the address of the string may be changed
183 in the subroutine but not in the calling program.
185 kes Re-enable code to remember last volume mounted on a non-tape
187 kes Add patch supplied in bug #1068 that fixes a SD crash when using
188 a Virtual autochanger.
189 kes Generate correct JobMedia records during spooling/despooling when
190 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
191 <tih@hamartun.priv.no> for excellent analysis and testing.
193 kes Tweak hash algorithm for htable using Martin Simmons idea
194 for doing a circular shift.
195 kes Remember what volume is in VTLs (previously turned off for
197 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
198 pointed out some problems in creating JobMedia records during
199 spooling with concurrent jobs. Fix the problem by updating the
200 start file position before despooling and generate a jobmedia
201 record at the end of despooling.
203 kes Fix handling of JobMedia records during spooling and when a
204 Volume is changed without actually writing data to the Volume.
206 kes Rework certain SD locking based on gdb tracebacks of deadlocks
207 sent by Eric. This code now uses only the volume_lock() rather
208 than the reservations lock when at EOM and acquiring a new
210 kes Ensure only one exit point in several subroutines.
212 kes Implement bsock code to permit locking. Use the new code in Verify
213 in the FD to prevent the heartbeat thread from disrupting the Verify
214 data sent to the Dir.
215 kes Modify SD locking to eliminate locking the reservations system from
216 outside the system. Use the volume lock when getting media data
217 and reserving a new volume at end of media.
218 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
219 when SD starts are not locked into place.
221 kes Fix error compiling runscript code on 64 bit machines.
222 kes Tweak Win32 mount point code.
223 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
224 cleared giving bad file estimate).
225 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
228 kes Keep Schedule run lists in order as suggested by
231 kes Implement autostart scripts for Debian.
232 ebl Implement upgrade catalog scripts.
234 ebl Apply jobstat patch for long term statistics. Have to implement
235 purge stats command and upgrade scripts.
236 kes Fix mtx-changer.in for broken Debian mt program.
238 kes Fix large number of JobMedia records reported by Eric Bollengier.
240 kes Apply doc fix from bug #1062.
241 kes Resolve crash and improper restore wx-console Win32 restore
242 GUI. Fixes bug #1065.
243 kes Update Win32 wxWidgets to latest version.
244 kes Attempt to do correct handling of Win32 mount points. Should
246 kes Fix Win32 FD backup/restore memory leak due to improper termination
247 of BackupRead/Write. This fixes bug# 1038.
249 ebl Reduce memory usage for accurate backup, working only with ctime
250 and mtime. (not all Lstat field)
251 About 40MB for my linux system (400.000 files)
253 kes Add dcr->reserved_volume flag that allows us to release a volume
254 even if it is not vol->released. This allows maxvol2 to work when
255 Volumes expire and we are already writing to the device (i.e. a
256 volume is pulled out from under us by another job terminating after
257 we reserve the drive).
259 ebl Permit multiple command/console per runscript definition.
260 RunScript { command = /bin/true ; command = /bin/false ... }
261 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
262 (restart an application) just after the VSS snapshot on windows.
263 kes Don't zap dcr values during release_volume() as they might
264 have the next Volume to be mounted.
265 kes Fix AIX prototype.
267 kes Second cut of drive switching during backup.
270 kes Update Win32 version of wxWidgets to most recent version.
271 kes Tweak Copy job details.
272 kes Rework dir_find_next_appendable_volume to make a bit more effort
273 to find a suitable volume before giving up.
275 kes Make ask_sysop_to_create... to return if waken from wait.
276 This helps get out of blocked conditions.
277 kes Experimental implementation of switch_device in reservations.
278 kes Implement FD version to allow easier protocol changes.
279 kes Add Plugin Options string -- not yet passed to FD.
280 kes Implement PluginOptions ACL.
282 kes Attempt to correct problems with restores with autochangers and
283 use counts going negative
284 kes Rework SD status command and implement API for bat. Implements
285 header, runing waitreservation, devices, volumes, spooling,
286 and terminated status keywords.
287 .status storage=xxx <keyword>
288 kes Clarify TLS error message by adding double quotes around name.
289 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
290 kes Pass jcr to tls routines so debug messages can be handled better.
291 kes Rework jobq resource allocation code, and possibly fix a bug
292 that caused reference counts to get out of sync.
294 kes Rename fd/dir plugin to use Bacula standard underscore.
295 kes Plugin work -- bring dir up to fd level.
296 kes Start implementation of VTL code
297 kes Fix Win32 build after adding new cats subroutine.
299 kes First cut at Duplicate Job implementation.
301 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
302 kes Start PluginOptions string, and refactor a bit of ua_run.c
303 ebl Apply Allan patch that permit to reset recyclepool.
305 kes Test patch -- possible fix or improvement for bug #1053
306 kes Refactor FD and SD status commands to permit new API code in
307 SD, and to fix Win32 build.
308 kes Win32 build is now working.
310 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
311 some ideas in patch from Scott Bailey.
312 kes Begin implementation of duplicate Job control.
313 kes Fix some of Win32 build after recent additions.
314 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
315 which causes the FD to detect whether or not the OS has the
316 honor no dump bit (*BSD systems), and if so, to skip backing up
317 any file with this bit set. The feature is enabled by setting
318 'honor no dump flag = yes' in the Options section of a FileSet.
320 kes Correct po warning message with datarootdir
321 kes Implement more code in dird.c to put configuration parsing in
322 a class rather than use globals.
323 kes Restructure SD status command for implementation of bat API
326 kes Suppress incorrect 'Will not descend from x into y' messages.
327 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
328 daemon globals used by parser.
329 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
331 kes Fix free of plugin_list when none exists.
333 ebl Apply accurate project patch.
335 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
336 on non-mempool object)
337 kes First cut of converting FD .status to work with bat API.
339 .status client=XXX header
340 .status client=XXX running
341 .status client=XXX terminated
342 kes Implement first cut of Copy Job.
343 kes Implement Catalog in Pool resource. It overrides catalog specified
344 in the Client resource.
346 kes Apply patch (with some difficulties) from Joao Henrique Freitas
347 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
349 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
350 ftruncate() actually works. In the case of some (cheap) NAS devices,
351 it does not, and so recycling NAS Volumes does not work. The code
352 simply unlink()s the file, then recreates it. This fixes bug #1011.
354 kes First incomplete cut of big malloc blocks for htable.
355 kes Tweak plugin code.
357 kes Plugin debug code + tweak a couple bat dialog layouts
359 kes Fix creating first JobMedia record during Migration to include
360 proper index. This caused slow restores of migrated jobs.
361 kes Temp fix to plugin name file_index.
362 kes Bacula backed up and restored a MySQL database.
364 kes Implement plugin restore.
365 kes Implement parsing of db_driver to give db_type index.
367 kes First cut of plugin restore code.
368 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
369 and do not strip paths on symbolic links.
370 kes Set catalog backup database and user name from values specified on
371 the ./configure line.
372 ebl Fix #1031 about wrong pool source information in job report.
375 kes Remove a redundant jcr argument to find_files, match_files, and
377 kes Implement '.status dir header|scheduled|running|terminated' that
378 prints the requested status section. With the exception of the
379 header, the other reports have fields separated by tabs (\t).
381 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
382 a resource embedded run command to find a since time if no explicit
383 since time was supplied on the command line.
384 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
385 that updates the state file at job termination time in addition to
386 when the daemon terminates.
388 kes First version where a plugin did a backup.
389 bpipe-fd.so created a backup file, wrote a test
390 string to it, and Bacua could restore this fabricated file.
392 kes Implement DB Driver = string for the DBI driver.
393 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
394 kes First cut of code for loading Win32 plugin dlls. Implement
395 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
396 and implement a dlfcn.h file based on opengroup's definitions of
399 kes First cut plugin directives.
401 kes Apply patch from bug #1049 to prevent stripping the path on a
403 kes Attempt to fix bug #1047 where stripping a path corrupts the
404 heap. Waiting for feedback.
405 kes Correct the Mount message not to suggest labeling a new tape
406 when doing a restore. Submitted by email by John Stoffel.
407 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
408 FD by using casting. Reported in bug #1042.
410 kes A bit of crypto cleanup. More later.
412 Release Version 2.2.8
414 kes Apply patch from Martin to correct bug #1040, bscan sets existing
416 kes Fixed important spelling error in doc -- bug #1045.
418 ebl Fix bextract to be able to extract non-portable Win32 data to
420 kes Move initialization of read/write res lock earlier in the code.
421 This fixes the crash with a null conf file. This fixes bug
423 kes Redefine CURES in lib/parse_conf to be URES and move it all
424 into lib/parse_conf.c -- this responds to bug #1042, but does
425 not fix it. The fix is not to compile with FORTIFY_SOURCE.
426 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
427 the trunk SVN. I don't think this was reported as a bug.
429 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
431 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
433 kes Add DataDespooling and DataCommitting status (committing is
434 the last despooling).
435 kes Finish implementation of new reservations code noted below.
437 kes Fix bsnprintf for float point numbers. I broke recently when
438 parameterizing some variables. This fixes bug #1036.
439 kes Undo recent reservations changes ... will apply them later
440 when they work better.
442 ebl Fixes #1034 which cause mysql to hang the connection after 8h
443 ebl Change default statistics target of filename.name and path.path
444 fields for PostgreSQL. This speeds lookup by indexes. Thanks
446 kes A few more tweaks to new reservation code. Make sure to clear
447 vol released flag when retaking volume. When reading label and
448 label is bad mark volume unused. When recycling, mark volume
449 unused so it can be renamed.
451 kes Fix reserve_volume() so it doesn't release a volume in use
452 (i.e. a volume entry not marked released). This should be
453 the last part needed to fix bug #1018.
455 kes Move Heartbeat documentation from Job to Director resource.
456 This fixes bug #1033.
458 kes Fix existing switch drive SD code to call autochanger to release
459 any old volume. This must be done to keep the autochanger from
460 releasing subsequently newly reserved volumes in doing a close().
461 This should fix bug #1018.
462 kes Fail if attempting to get console input in batch mode. This
463 should help fail RunScript console commands that are incomplete.
464 kes First cut implementing switch_drive() in SD (not actually called).
466 kes Implement first cut running console commands in a RunScript.
468 ebl Fixes bug #1028 where 'Selection Type' option was not usable
470 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
473 Release Version 2.2.7
475 kes Add new free_tls() entry point so that Win32 builds.
476 kes Fix compile warning in src/lib/util.c
477 kes Fix entry point for edit_job_codes() so that Win32 builds.
478 kes Fix seg fault Frank Sweetser reports in regression testing
479 on his systems. The problem was that the original author of
480 bsnprintf.c did not take into account the side effects of
481 using ++x in the argument to a #define.
482 kes Make SD protocol backward compatible with version 2.2.x.
484 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
485 because Bacula no longer restores sockets.
486 ebl Always use ignorecase fileset option on win32 FD.
488 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
489 that implements double quoting include names in conf files,
490 and also allows piping input by having the first character
491 be a vertical bar (|).
492 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
493 that implement %f in RunScripts to pass the FileSet name.
494 kes Skip leading | when lex input comes from a pipe as suggested
495 by Michael Stapelberg <michael@stapelberg.de>.
497 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
498 Nerijus Baliunas <nerijus@users.sourceforge.net>
500 kes Implement Plugin Directory and plugin events.
502 kes Implement a security enhancement: TLS authentication but no
503 encryption. Enabled by setting 'TLS Authentication = yes'.
504 Note when this is on, TLS encryption is turned OFF!
506 kes This patch corrects a problem where the maximum concurrent storage
507 jobs counter gets out of sync during restore jobs causing jobs to
508 'wait on max Storage jobs'. This patch fixes bug #1009.
510 kes This patch fixes bcopy so that it produces correct Volumes.
512 kes This patch eliminates spurious output to the console during a VerifyVolume
513 job that contains encrypted data. It fixes bug #1024.
515 kes This patch prevents the 'status dir' command from trying to use a scratch
516 volume and possibly moving it from one pool to another. This patch fixes
519 kes Add new include to postgresql.c suggested by Marc Cousins so
520 that it compiles correctly with pgre version 8.3.
522 kes Fix --archivedir addition to configure. Replace it with
523 --with-archivedir in configure.in This fixes the regression
525 kes This patch fixes bug #1012 where the job is canceled because
526 of Max Run Time exceeded when the job has not yet started.
528 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
529 one 'part' to write. Instead of each part being stored on disk,
530 written to DVD, then deleted from disk, all parts are written to disk,
531 and only the last is written and deleted from disk.
532 kes This patch fixes the status command to include the formating string for
533 JS_AttrInsterting. It fixes bug #1021.
534 kes This patch should fix the Mac OS X build problem on the latest
535 Darwin, where sys/types.h was not included correctly (apparently
536 due to a change in the Mac headers). The solution was to explicitly
537 ensure that it is defined for the ./configure.
538 This patch also has a rebuild of configure that includes the Debian
539 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
540 kes This patch should ensure that queued messages to the console are
541 displayed as soon as possible. It should fix bug 1007, but has been
542 reported not to work.
544 kes This patch fixes the infinite loop when trying to increase the
545 maximum number of volumes in a Pool during the add command.
546 This patch fixes bug #1008.
548 Release Version 2.2.6
550 db Remove extra data on estimate command in joblist for bat.
552 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
553 really change anything, but is the beginning of doing it *right*.
554 To do it completely right the LastWritten date must be passed to
555 the SD, but it is not yet done.
556 kes Minor tweaks to some bat restore SQL.
557 kes This patch fixes bug #1003 where putting the message output from
558 a Verify job into the catalog results in a recursive loop. The problem
559 seems to show up only with postgresql (to be verified).
560 kes Correct %x to %p in postgresql debug statement.
562 kes Fix bug #942 where lots of emails where generated when the heartbeat
563 interval was low and Bacula wanted a different tape from the one in
566 ebl Add new SD despooling attributes and Dir inserting attributes
567 job status codes in the catalog (Status table).
569 ebl Use qmake-qt4 instead of qmake when available (debian system).
571 kes Add a security warning to src/cats/make_catalog_backup.in indicating
572 that passing the password via the command line (arg 3) is insecure.
573 This responds to bug #990 (it doesn't fix it).
575 kes Set default debug_level to zero. This corrects bugs #991 and #993.
576 kes Fix a crash in bat when it cannot connect to the Director for example
577 if the Director is not running.
578 kes Remove redundant INDEX (JobId) from File table in the trunk.
580 kes Make explicit exception to GPL in LICENSE to permit linking
581 the Win32 FD with Microsoft VSS code.
582 kes Apply the Solaris package patch from
583 Masopust, Christian <christian.masopust@siemens.com>
584 kes Apply the patch to optionally add a timestamp in the debug output
585 submitted by Mariusz Czulada <manieq@wp.eu>.
587 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
588 backend (sql_strerror). Fixes bug #989
590 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
591 It applied with no problems.
592 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
594 kes Redirect stderror to stdin on mt status command in mtx-changer.in
595 since the status is returned on stderr on Solaris.
596 kes Activate Close button on tray-monitor window. This fixes
598 kes Check for NULL item in parse_conf.c before calling it. In the
599 case of Device, there is no item and this caused a seg fault when
600 Device appears in the conf file.
601 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
602 avoids pulling in config.h multiple times in some new code.
604 kes Fix spurious warning message printed when creating a volume with
605 a LabelFormat. This fixes bug #976.
607 Release Version 2.2.5
609 kes Add JobId in place of Job name in all the Jmsg() output.
610 kes Correct the APP_DESC for the Win32 storage service (remove an e).
612 kes Make maxvol-test and new more strict maxvol2-test work.
613 kes Print JobId in all Jmsg() job output.
615 kes Add new SD despooling attributes and Dir inserting attributes
616 job status codes. This fixes bug 961.
617 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
619 kes Fix doc issue. This fixes bug #963.
620 kes Fix listing performance problems in bat. Pointed out by
622 kes Remove old debug code.
623 kes Fix bat code that tests for Win32. This should fix bug #968
624 kes Query 5 list wrong Vol after migration. This fixes bug #960
626 ebl Fix #969 where user can't change Replace option in restore menu.
628 kes Save jcr in thread specific data (tsd) for each thread.
629 kes Make Dmsg() print JobId as -%u.
630 kes Make Jmsg, Emsg, and others automatically pickup the jobid
631 for the thread if it exists.
632 kes Remove old reservation debug jid code.
633 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
634 ebl Add an option that permit to specify spool size in job
635 definition. (Applying patches/testing/spoolsize_per_job.patch).
636 You must upgrade SD and DIR at the same time.
637 dvl Add new configuration item --archivedir
638 dvl Adjust regression tests to use tmp not /tmp. This will allow
639 multiple concurrent runs of the regression tests.
641 kes Fix race condition that drops final block written to volume.
642 This happens in rare cases with multiple simultaneous jobs
643 when the Volume fills. This fixes bug #964. May be related
644 to bug #935 and possibly #903.
645 kes Eliminate more strerror() and replace with bstrerror().
646 kes Remove BSD getopt and replace with unrestricted IBM version.
647 kes Fix Win32 build for changed calling sequences.
648 kes More tweaks to the mount volume routines to get everything
649 right. Changed variable name from find to have_vol, which is
650 much easier to understand.
651 kes Enhance btimer debug code.
653 kes Fix FD->SD authorization failure, which was due to spurious
654 wakeups from a pthread_cond_timedwait(). Simply check the
655 predicate before continuing. This fixes bug #953.
656 kes Add const char where needed (more to do). Remove temp debug code.
658 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
659 kes Don't overwrite error message in check_tables_version.
661 kes Unlock batch insert tables with same calls used elsewhere.
662 kes Allow starting 59 jobs a second.
663 kes Make SD session key more random.
664 kes Add retry for SQLite opening db if it fails. Probably helps
666 kes Suppress extra error messages during batch insert failure.
668 kes Add jcr to timer packets so if killed message can be sent to job.
669 kes Add JobId to all Dmsg() output.
670 kes Put some FD auth code on dbglvl rather than fixed.
671 kes Return insert attributes error message in db msg buffer to avoid
672 false error messages. Helps fix bug #966.
673 kes Separate batch init error messages. Probably helps fix bug #966.
674 kes Make SD code that contructs attribute insert check string lengths
676 kes If Dir gets an error during inserting attributes, cancel SD.
677 This reduces unnecessary error messages.
679 kes Correct search boolean for getting Volume info
680 ebl Cleanup batch insert code. Probably fixes bug #965.
681 kes Back out one small change to the reservation system (reserving a volume).
682 kes Rework how a Volume is mounted. It is now much more intelligent and
683 will always attempt to use any mounted volume if possible and reduces
684 calls to the Director asking about volumes.
686 kes Turn off some code when batch insert not enabled.
687 kes Edit FD name in connect error messages.
688 kes Rework the reservation system to take into account that the Director
689 might give us a Volume that is different from the current one being
690 used, and to ensure that we don't exceed Maximum Volume Jobs.
691 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
692 fatal error with multiple jobs running'
693 kes Add more debug code in reservation system.
694 kes Implement maxvol-test to check bug #947.
696 kes Add code to handle tray monitor separated from Win32 FD.
697 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
699 kes Add missed return in fixing verify bug -- trunk only.
700 ebl Fix a command parser issue causing a director segfault.
701 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
703 kes Increase the max block size to 4MB fixes bug #957.
704 kes ERABT if user sets min block size > max block size. Fixes bug #956.
705 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
706 is not properly mounted (recognized) during a poll.
707 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
708 Job that has differences reports Verify OK.
709 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
711 ebl Add an option to operate on all pools with update vol parameters.
712 This complete the project 20. Patch from Nigel Stepp.
713 ebl Add history support to bconsole when using readline.
714 Using Ctrl-D to exit doesn't update .bconsole_history
715 kes Modify new volume algorithm to use max MediaId for generating next
716 volume number rather than the count of Volumes. This should essentially
717 eliminate the failure rate if some volumes were deleted. Bug #921.
718 kes Begin implemention of Optimize Job Scheduling.
719 kes Implement restore callback that Dirk and I agreed on for bat
720 restore. This fixes bug #928. Restore of backup of zero files fails.
721 kes Fix SQL Catalog logging which broke with new db_escape_string
724 Release Version 2.2.4
726 kes Fix bacula_cats.def for new db_escape_string().
727 kes Increase size of name string when FD making connection to SD.
728 May fix bug #953. FD->SD connection failure.
730 kes Add code to help Dan debug 2drive-incremental-2disk test.
731 kes Add code to try to fix bug #908.
732 kes Add waits to multiple exit detection code to try to force pid
733 file to always be deleted.
734 kes Restore good dev.tar.gz to rescue set appropriate binary property.
736 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
737 trying to switch drives by checking for blocking before unblocking.
739 kes Cancel storage daemon in all cases where FD reports error. This
740 should fix virtually all cases of bug #920.
741 kes Fix db_escape_string() for MySQL which did not compile.
743 kes Fix error message that was clobbered when Dir tells SD it does not
744 have write permission on Volume. This should fix a minor point
745 in bug #942, but not the main problem.
746 kes Add code to cancel job in SD if FD connection fails. This should
748 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
749 dvl Pass jcr and db into db_escape_string() to enable better escaping
751 kes Fix migration code to get correct Volume name with multiple volumes
752 by skipping |. Fixes bug #936.
753 kes Implement patch supplied by Landon to fix bug #944 where using
754 TLS with bconsole uses 99+% of the CPU.
755 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
757 kes Move patches into patches directory.
759 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
762 ebl Using 'm' in bconsole will show messages like before,
763 and not memory usage.
764 kes Fix bug #935, and probably also bug #903 where files were not
765 restored. MediaId was not properly set in JobMedia record after
768 kes Suppress chown and chmod error messages if the FD is not running
771 kes Apply Martin Simmons' patch that should turn off the new API usage
772 when batch insert is turned off allowing building on older
774 kes Add ./configure search in qwt-qt4 for qwt package
776 kes Bacula is now free of 3rd party GPL copyrighted code!
778 kes Add guid_to_name.c/h which replace idcache.
779 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
781 ebl Detect if new PosgreSQL batch insert API is present.
782 kes Correct incorrect mempool call causing Director crash. Occurs on
783 systems without va_copy().
784 sb Update spec files for 2.2.1 release
786 kes Fix memory pool call in ua_output.c. bug #934.
787 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
788 Add test program to fnmatch.c
790 kes Integrate patch to README.vc8 from
791 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
792 edit it to get it into Unix patch format.
793 kes Implement mkpath.c to replace old FSF makepath.c
795 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
797 Release Version 2.2.1
799 kes Update POTFILES.in
800 kes Cleanup a few underquoted AC_DEFUNs in configure
801 kes Apply patch from Martin Simmons that adds a test for va_copy to
804 kes Fix bug #921 by increasing the number of tries to create a new volume
806 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
807 can be called multiple times. Implement a version for machines
808 without va_copy() that gets a big buffer.
810 kes Integrate more portable zone offset code into bsmtp.c
811 Submitted by Attila Fülöp.
813 kes Fix bad SD->FD return status reported by
814 (James Harper) <james.harper@bendigoit.com.au>
815 ebl Fix a bug in read_close_session which return random status
816 thanks to James Harper
818 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
819 and directory names during restore of single file/directories.
820 kes Add sanity checks to .sql command when string is empty. Hopefully
821 that will resolve Dirks Director crash.
823 kes Apply patch submitted by Martin Simmons that corrects a seg fault
824 in the bsmtp chat subroutine when debug is >= 10.
826 kes Fix Director crash when running bat SQL queries.
827 kes Add David's notes on Item 8: Copy pools.
829 kes Rework projects file to be current and ready for a vote.
830 kes Enhance lex scanner error message.
832 kes Tweak LICENSE file to mention BSD code.
833 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
834 if specified on the ./configure.
835 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
836 This class is intended to allow us to open a second bsock to the
837 Director while in the restore subdialog.
839 kes Fix configure to create bat Makefile before creating dependencies.
840 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
841 kes Add a tooltip to the tray monitor.
842 dvl Set the Director's PID file before dropping privs. This fixes
845 kes Update AUTHORs file
846 kes Increase the default max concurrent jobs to 20 in FD and SD to
847 correspond with the default .conf files.
848 kes Rewrite the Win32 service routines. This eliminates the 3 copies
849 some different, of the same file created by RN when porting the
851 kes Rearrange some of the Win32 directories and the placement of the files
853 kes Set DEVELOPER flag in version.h
855 ========================================================================
856 Release Version 2.2.0
858 kes Apply a second doc patch from Marc.
859 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
860 improves the tips section that discusses how to setup multiple
863 kes Update bat README file.
864 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
865 corrects a typo in the Recycle status check in db_find_next_volume().
866 This will probably fix a number of annoying problems with multiple
868 kes Modify most of dird/msgchan.c to use bsock class calls rather than
869 bnet calls -- no functionality change.
871 kes Modify the Verify output to specify if files are missing on
872 the Volume(s) or disk. Fixes confusion in bug #916.
873 kes When more than one Volume is read in a migration job, the last
874 Volume bytes reported are from the last read volume rather than
875 the last written volume. Fixed. This fixes bug #910.
876 kes Fix display of Recycle flag after update volume=foo recycle=yes.
877 It previously printed New Recyle flag is: no. This fixes bug
880 kes Correct seg fault when switching tape drives during restore.
881 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
882 be used until after 2.2.0 release.
884 kes Remove fnmatch() in SD that permitted wild card specifications.
887 kes Fix %g in filename returned by SQL for browse tree reported by
889 kes Fix configure so that it puts config.out in the cwd rather than
891 kes Attempt to fix the locking problem reported by Eric in bug #906.
892 kes Make berrno class to leave errno unchanged after constructor call.
893 kes Make bnet_server use the heap rather than the stack to allocate
894 its socket fd pointers to avoid a crash at termination. Problem
895 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
897 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
898 and putting it in depkgs-qt along with Qt4.3.
900 kes Rework code in acquire.c that switches drives for reading when
901 the Media Type does not match. This should fix bug #906
903 ebl Fix a director segfault during job setup #907
904 kes Correct seg fault in postgresql when first operation returns no
905 rows. Fixes Dirks File browser problem seg fault with bat.
907 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
908 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
911 kes Implement PopUp YES/NO dialog for bat.
913 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
915 kes Correct RunScript to terminate job in FD on failure.
916 kes Change abort_on_error and AbortJobOnError to fail_on_error
917 and FailJobOnError in RunScripts.
918 kes Minor tweaks of code formating in RunScripts, principally to
919 avoid depassing 80 columns.
921 kes Eliminate one #ifdef Win32 in bsmtp
922 kes Implement grow tool to grow a file for testing very large databases.
923 kes Add big-vol-test to test Bacula seeking with > 5GB.
926 kes Modify find_next_volume() to return all values in Media record.
927 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
931 kes Update Release notes
933 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
934 Warning, in previous beta version, all media get from scratch keep their
937 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
938 This should fix bug #842. Made a note to look at removing the temp
939 files at the end of the install.
940 kes Add ability to mount and unmount a file device providing it is
941 marked as being removable and has the appropriate mount and unmount
942 commands defined in the Device resource. This fixes bug #830.
943 kes When applying a storage override, release all previous storage
944 definitions rather than just prepending the new storage.
945 This should prevent a good deal of confusion.
947 kes Implement ./configure search for qwt libraries.
949 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
950 Win32 FD. This should fix bug #893.
951 kes Remove an unnecessary beep in Win32 init code.
952 kes Update copyright dates in Win32 executable about boxes.
953 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
954 code with a BSD getopt.c and getopt.h.
955 kes Remove sched.h from the Win32 compat directory -- not used.
956 kes Remove the Exit menu item from the Win32 tray monitor. If you really
957 need to shut it down, do it through the services panel or the command
959 kes Remove some inappropriate Bacula FSFE copyrights.
960 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
961 kes Fix regress config non-portable test as pointed out by
962 Florian Heigl <florian.heigl@gmail.com>
963 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
964 as pointed out by Florian Heigl <florian.heigl@gmail.com>
966 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
967 Reported by Frank Sweetser.
971 kes Fix client-only build.
972 kes Integrate client-only fixes for bsys (initgroups) and conio from
973 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
974 kes Make arguments to get_scratch_volume() in same order as other
976 kes Rework the prune_volumes() subroutine so that after purging and
977 no volume found in desired pool, it will check for a scratch
978 volume. This prevents recycling the whole scratch pool.
979 kes Add code to status storage to print boffset_t (largefile support).
981 kes Move qwt (Graphics libarary for Qt4) to depkgs.
982 kes You now need a --with-qwt=<dir> to be able to build bat.
983 kes Update src/win32/cats/bacula_cats.def to include the new
984 db_get_query_dbids() call on Win32.
986 kes Correct a problem when selecting a scratch volume and moving
987 it to another pool that lost some columns.
988 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
989 kes Enhance Autochanger error messages to include Volume and device name.
990 kes Rework prune_volumes() code to take account of InChanger flag,
991 and to handle recycling volumes going to the Scratch pool and
992 current pool because the RecyclePool directive.
993 kes Implement a better and more efficient db_get_query_dbids() to
994 handle creating and passing back a list of DBIds.
998 kes Start work on new more efficient DBId subroutine. First use
999 will be for recycling volume to Scratch inchanger.
1000 kes Increase number of JobIds in pruning from 1000 to 10000.
1001 This to be replaced by above routine.
1002 kes Begin implementation of building Qt4 on Win32.
1003 kes Correct typo in fix I added for bad TLS shutdown.
1004 kes Pull 2.0.3 patches into patches directory.
1005 kes Update Release notes. Include qt-console in line count.
1006 kes Update Projects file.
1008 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1009 bug in migration code where a job that spanned two volumes
1012 kes Implement new BST_DESPOOLING blocked state. Change from locking
1013 during despooling in SD to blocking. This means that other threads
1014 can work with the device structure, in particular the reservations
1015 system while despooling.
1017 kes Fix return in reservation message queue that missed clearing
1018 the jcr lock (implemented 26Jun07 below).
1019 kes Rename a number of dev methods to make locking function names
1021 kes Document locking in lock.c. Move lock structures to new file
1024 kes Move reservations message lock to lock jcr only this
1026 kes Move main SD locking code into lock.c (new file).
1027 kes Update Win32 build to include lock.c
1031 kes Dirk committed the qwt library code for drawing graphs in bat.
1032 kes Tweak install of qwt so that it is integrated with ./configure.
1034 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1035 out by Eric (my typo).
1036 ebl Fix configure.in to get batch mode enable
1037 kes Return correct string from authenticate.cpp in bat when connecting
1039 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1040 spurious line drops when using TLS.
1041 kes Do not file reparse points when restoring a file that already
1044 kes Implement Windows reparse points -- similar to directories, but
1045 we do not descend into it. This is a first cut. They seem to
1046 be backed up, but restore is not yet tested.
1047 kes Remove restore_blocking in tls code when shutting a socket to leave
1048 it in blocking mode. Hopefully this will fix the encryption bug
1049 reported by Frank Sweetser.
1050 kes When opening a file for backup, tell the OS that we are going to
1051 read it sequentially -- optimization.
1052 kes Change variable names in authenticate_director() to not conflict
1053 with member names in bat. Caused great confusion with compiler,
1056 kes Queue openssl error messages in case of comm problem.
1057 kes Do shutdown() call if socket terminated.
1058 kes Remove some duplicated code in tls.c
1059 kes Move more of the bsock member variables into private and access
1061 kes Add Frank Sweetser's tls-test to the regression suite.
1063 kes Add Swedish sv.po file
1065 kes Don't print clock skew message in FD if less than 3 seconds diff.
1066 kes Add a bit of VSS info to status client.
1067 kes Implement a first cut of Vista VSS, using Win2003 code.
1069 Release: 2.1.20 beta
1071 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1072 loaded tape but uses first drive).
1073 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1074 This was indeed a Win32 issue.
1076 kes Simplify search of autochanger for in-use Volume.
1077 kes Fix exit condition of check for in-use volume. kes Remove
1078 inappropriate my_postgresql_free_result() in db_close()
1080 kes Fix bad return in FD when encryption signature not found.
1081 Probably caused a crash.
1082 kes Inhibit missing encryption signature error messages for
1083 file types where no signature computed.
1084 kes Correct inverted check on autochanger in reservation system.
1085 kes Tweak debug code in autochanger reservation.
1087 kes Add some additional locking in the cats directory in subroutines
1088 that modify packet variables called from batch insert.
1089 kes Rework how dcrs are allocated. new_dcr() can now be called
1090 with an existing pointer, and it will simply clean it up.
1091 This allows the reservation system to test various different
1092 devices, and will permit easy device changes.
1093 kes A bunch of changes all over to handle new new_dcr() calling
1095 kes Work more on the Volume management in the SD. Remember Volumes
1096 for tape drives and for autochangers (even virtual disk changers).
1097 kes When looking at the Volume list to reserve a drive, handle
1098 autochanger names correctly by interating through the changer
1099 devices. Also call the Director to see if a Volume is suitable
1100 for the current job.
1101 kes Fix some bugs in bscan. Make sure all media records are written.
1102 Make sure that valid JobMedia records are written for disk files.
1103 Previously they were completely wrong.
1104 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1105 that the URLs don't change and so that the developers will all
1106 work off the same copy. Rebuild from scrach.
1107 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1109 Release: 2.1.18 beta
1111 kes Fix seg fault in FD from incorrect digest size.
1112 kes Fix argument to non-OpenSSL crypto.c subroutine.
1114 Release: 2.1.16 beta
1116 kes Remove a few malloc()s from the encryption code.
1117 kes Use the class calls to bsock in filed/backup.c and restore.c in
1118 place of the old bnet_xxx code.
1119 kes Implement code that does an on the fly calculation of the
1120 signing digest during restore of encrypted files. It makes
1121 a best guess at the algorithm, and if it is not correct, will
1122 then revert to the old code which reads the file after it is
1124 kes Implement at least one missing crypto stream in stream_to_ascii()
1125 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1126 #877 where a reload with bad syntax causes Dir to exit.
1128 Cut: 2.1.14 beta (not released)
1130 kes Do not free a volume on a tape drive until another volume is
1131 mounted and read, or the autochanger unloads the volume.
1132 This should help the SD re-use volumes that are already mounted,
1133 and should fix bug #886.
1134 kes Apply patch from user brettedgar that allows gnome2-console include
1135 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1136 kes Apply patch from Lucien Weller that fixes day of week calculation
1137 because of DST flag problem. Fixes bug #887.
1139 kes Move find_next_appendable_volume() to after acquiring a valid device
1140 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1142 kes Unable to reproduce bug 872. However added additional testing for
1144 kes Bug #874 resolved by documenting SQLite limitations.
1145 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1146 kes Bug #881 resolved by removing typo in mtx-changer script.
1147 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1148 approval. Added a link to the wiki on the web page, and implemented
1149 a backup from http://paramount.ind.wpi.edu
1151 kes Fix update allfrompool to pass pool name.
1153 kes Convert to pure GPL v2 license.
1154 kes Fix sscanf problems reported by Peter Buschman that caused
1155 a bus error on Solaris.
1156 kes Rework (simplify) the select prompt in bat.
1157 kes Move get_jobid_from_tid() into lib and create a
1159 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1160 should definitely fix the problem of lost error messages in the
1162 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1163 kes Eliminate tcpd.h from the project. Enclose the #include from the
1164 library with extern C ...
1165 kes Add print of signal name when a signal is trapped.
1167 Release: 2.1.12 beta
1169 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1171 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1172 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1173 makes SQLit3 run 30 times faster, though a bit less safe.
1174 kes Implement --with-batch-insert in configure and detection of thread
1175 safe libraries. It is on by default, but turned off if no thread
1176 safe library (e.g. SQLite 2) is available.
1178 kes Fix Bacula PostgreSQL buffer overruns.
1179 kes Do better checking for NULL results returned from PostgreSQL;
1180 implement retry for failed queries; clear results buffer after
1181 failed query. Hopefully this will correct the PostgreSQL failures.
1183 kes Implement algorithm to handle only one appendable volume with
1184 Prefer Mounted Volumes = no.
1185 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1186 returned from a query.
1187 kes Make volume lock recursive.
1188 kes Implement an additional volume reservation algorithm that
1189 starts by considering all reserved volumes then uses the
1190 old brute force algorithm of searching the resources to
1191 find a suitable device.
1192 kes Add new reservations debug code and refine the old code.
1193 kes Update the win32/dll/bacula.defs file.
1195 kes Tweak reservations algorithm to permit a few more cases, i.e.
1196 volume reserved, but on different drive, ...
1197 kes Enhance SD status to include Pool and Media Type for drive in a
1198 more readable format (a bit longer).
1199 kes Fix PostgreSQL double free.
1201 kes Minor refactoring of restore decryption code.
1202 kes Add code to smartall.c to detect double free of a buffer.
1204 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1205 so that bsmtp will create a correct email address (mailbox only).
1206 kes Modify 'memory' command so that the buffers are listed as 'In use'
1207 to avoid confusion with Orphaned buffers.
1208 kes I reworked the OpenSSL include/lib flags to be handled in
1209 the standard Bacula way, which should fix bug #863 concerning
1210 non-standard OpenSSL libraries.
1212 kes Implement Help Browser window for bat.
1213 kes Fix reload bug that reset StorageId to zero.
1215 kes Fix TLS #ifdefing when TLS turned off.
1216 kes Ensure that when labelling a tape with Slot=0 that InChanger
1218 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1220 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1221 add DISTINCT (required by PostgreSQL).
1222 kes Implement BSOCK authenticate_director() method. Eventually will
1223 authenicate all daemons.
1224 kes Move several more functions into the BSOCK class.
1226 kes Add code to tell the OS that we no longer need a cached
1227 file that we were reading. In findlib/bfile.c. Also,
1228 only cache files that we are reading. Thanks to
1229 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1230 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1231 kes Implement script to automatically generate cats and dll .def
1232 files for Win32 dll.
1233 kes Update README.mingw32 to include new .def file generation.
1234 kes Correct typo in UTF-8 error message as reported by:
1235 jhernandez <julianhernandez@gmail.com>
1236 kes Add additional sm_check() code on debug level 1.
1237 kes Set default debug level to 1.
1238 kes Trap SIGABRT in attempt to get traceback.
1240 kes Reduce bat connect timeout from 30 to 15 seconds.
1241 kes More restructuring and implementing BSOCK class in place of
1243 kes Remove a few unnecessary malloc() tests in crypto code.
1244 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1245 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1246 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1248 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1250 kes Fix Verify InitCatalog. The attributes were not pointing to the
1251 correct saved location.
1252 kes Implement message callback so that GUI is sure to get all
1253 daemon messages. Currently displayed in a dialog in bat.
1254 kes Ignore SIGUSR2 (Bacula timer) in bat.
1255 kes Apply regress patch from bug #859 to allow regress to work
1256 with Solaris compiler.
1258 kes Begin adding TLS support to bat.
1259 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1260 clean up lex.c and make it more readable.
1262 kes Move more bnet functions into the BSOCK class.
1263 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1264 kes Complete change of berrno strerror() method to bstrerror()
1266 Release: 2.1.10 beta
1268 kes Cleanup incorrect email addresses in bsmtp.
1269 kes Make bat display initial messages rather than discard them.
1271 kes First cut of adding .mod to the run command.
1272 kes Implement auto display of messages in bat.
1273 kes Enhanced preferences to allow all Bacula output to be
1276 kes Try to make bsmtp date routines more generic.
1277 kes Fixed bug #856 autochanger documentation.
1278 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1279 kes Add new cats entry point so Win32 builds.
1281 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1283 kes Do better checking for the MySQL 64 bit libraries looking for both
1284 .a and .so libraries.
1285 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1286 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1287 kes Require the thread safe version of MySQL during configure. Thanks
1288 to Andre Noll for pointing this out.
1289 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1290 continuing in migration code.
1291 kes Apply implementation of tray-monitor font derived from gnome-console
1292 submitted by Andreas Piesk <a.piesk@gmx.net>
1294 kes Eliminate important memory loss in SQLite
1295 kes Fixed the batch insert MySQL thread specific data that was not
1296 being freed. See cats/mysql.c:db_thread_cleanup().
1297 kes Fix restore before command.
1298 kes Convert old hdr.name to name() in a few places.
1299 kes Implement update jobid command.
1300 kes Return all time_t dates in db_get_job_record()
1301 kes Stop watchdog in SD earlier.
1302 kes Put Pool just after Storage in please mount message.
1303 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1306 kes Update the po files.
1307 kes Fix Verify InitCatalog by making it cache attributes.
1309 kes Change name bacula-bat to bat for man 1 page to correspond to
1311 kes Check for client and store NULL pointers in status command. This
1313 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1314 kes Fix sign extended editing of %p.
1315 kes Clean out a little old #ifdefing in cats/mysql.c
1317 kes If time diff between DIR and FD is more than 600 seconds convert
1318 INFO message to WARNING.
1319 kes Implement heap size display in status for all daemons.
1320 kes Attempt to fix MySQL db open memory loss (not successfull).
1321 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1322 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1323 Query. This looks like a MySQL but but by doing extra releases,
1324 the memory goes away. This should fix bug #847.
1326 kes When backup fails, cancel SD before waiting for sd termination.
1327 kes If SD is waiting for FD to connect during cancel, wake up the
1329 kes Fix fsf code so that errno is correctly reported.
1330 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1332 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1333 so that Bacula doesn't later stumble into a seg fault.
1334 kes Use the term Restore Client in the restore Job report.
1335 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1336 the original job's FileSetId.
1337 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1338 spooling in migration jobs. Not yet tested.
1339 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1340 reading conf file from a pipe. However, do it with open_bpipe()
1341 rather than popen. Not yet tested.
1343 kes Fix an ugly bug where the VolCatBytes were getting updated
1345 kes Implement bconsole memory command that prints current memory
1346 usage, plus smartalloc dump.
1347 kes Clarify some error messages in backup, admin, and migrate.
1348 kes Shrink label dialog to smaller size.
1349 kes Invert Cancel OK buttons on restore to be OK Cancel.
1350 kes More strerror() to bstrerror() conversions.
1352 kes Start implementing bstrerror() in place of strerror().
1353 kes Stripping path -- seems to work.
1355 kes Prevent door and port files from being restored (mostly
1357 kes Free an unreleased buffer in compat code.
1358 kes Change console Job name from *Console* to -Console- to eliminate
1359 Win32 filename problems. Put Win32 path separator when creating
1360 Console file. This fixes bug #846.
1361 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1363 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1365 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1366 to force Win32 error message.
1368 kes First cut strip path. The data should be passed to the FD,
1369 but nothing is done with it yet.
1370 kes Enhance the digest and signature routines in the crypto
1371 library to accept a JCR and to use it to print error messages
1372 so that they will go in the Job report rather than the daemon's
1374 kes Simplify some of the verify signature code.
1375 kes Simplify a few of the alternative returns in the signature
1378 ebl Use only POSIX regex instead of GNU regex in breg.c for
1379 File relocation. It fix broken freebsd compilation.
1380 kes Convert all other Dir files to use new ua class message
1382 kes Tentative fix for missing digest signature in bug 807.
1383 kes Correct handle problem in new win32_ftruncate routine.
1384 kes Convert ua_purge.c and ua_update.c to use new ua class
1385 message routines for bat.
1387 kes Correct incorrect installation of LICENSE in Win32 installer.
1388 kes Display LICENSE at the beginning of the Win32 install.
1389 kes Attempt to correct the need for the png files to be installed
1391 kes Reapply my bat.conf install script in qt-console. I think I
1392 editted bat.pro instead of bat.pro.in and it was lost.
1393 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1394 the /var/lock/subsys for subsysdir. Also corrects typos in the
1397 kes First cut update job.
1398 kes Correct configure to include qmake of src/qt-console directory.
1400 kes Make restore job yes/mod/no print in one command so GUI works.
1401 kes First cut implementing backup and restore client.
1402 kes Correct editing in Verify output that caused a seg fault.
1404 kes Insure that bat.conf is not overwritten during installation.
1405 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1406 while I was implementing migration in March 2006 !
1408 ebl Cleanup file relocation, using char *RegexWhere instead of
1409 char *where + bool where_use_regexp
1410 kes Update some manpages and add bat manpage.
1411 kes Make a first cut at converting bacula.spec.in for bwx-console
1413 kes Apply patch from John Goerzen to add hostname as fourth argument
1414 to make_catalog_backup script.
1415 kes Fix typos I introduced into bsmtp.c
1416 kes Make pm_strxxx() routines handle input of NULL pointer. This
1417 is to protect from NULL pointers returned from SQL databases.
1418 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1419 kes Add more debug to FIFO code -- fix fifo regression test.
1421 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1422 kes Add thread timer to bnet_connect() to break from OS if wait time
1425 kes Update Win32 build to include new files, new symbols, and
1427 kes Implement socket level heartbeat (tcp_keepidle)
1428 ebl Commit File relocation patch
1429 kes Make bat have 'make install' target.
1430 kes Warn during install if old gnome-console binary found.
1431 kes Warn during install if old wx-console binary found.
1432 kes Add -8 option to bsmtp command line to add content type utf-8.
1433 Fixes bug #809. (Character coding problem in bsmtp).
1434 kes If < is found in target (from, to, cc) then do not enclose the
1435 target in < > in bsmtp. Fixes bug #772 (malformed address).
1436 kes When printing certain items in dbcheck, stop after 300000.
1437 Fixes bug #822. (dbcheck loops).
1438 kes Incorrect status in Dir after waiting for mount with poll set.
1441 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1443 kes Print waiting to reserve a device every 5 mins.
1445 kes Don't call close_part in label.c if tape and relabel.
1446 kes Don't free volume if busy in close() -- should help with
1448 ebl Fix #824 RunScript bug (After script could be execute twice)
1449 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1450 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1451 Add a regression script to test RunScript
1453 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1456 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1457 deprecated. No additional bugs will be fixed, and they will be dropped
1458 in a future release (probably 2.4.0).
1459 kes Change name of wx-console to bwx-console to make it more Bacula
1461 kes Change the name of gnome-console to bgnome-console to make it
1464 kes Some time in March, a Feature Request with patch from Jorj Bauer
1465 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1467 The ability for the director to validate a Client (FD) CN against
1468 an arbitrary set of patterns rather than the hostname, with
1469 A new 'TLS Allowed CN' set of directives which are implemented
1470 in the Client resource. Then pattern matching is used in place
1471 of hostname matching against the Certificate's CN. As an example, we
1472 have certificates which (a) use a local CA, and (b) have a CN of the
1474 kes Add new/changed entry points to Win32 build
1475 kes Create unaccepted-projects for projects that are not accepted.
1476 kes Simplify locking in the reservations system.
1477 kes Add more debug code in reservations.
1478 kes Make sure error condition on reserving a volume is handled correctly.
1479 kes Correct handling of volume_in_use.
1480 kes Correct handling of initializing a device.
1481 kes Move handling of broadcasting releasing a device into release_device().
1482 kes Correct attaching dcr to dev so that it is only done if device
1483 is properly initiated.
1485 kes Locking debug level tweaks in SD.
1486 kes Tweak new Volume code.
1488 kes Add exec external-command [wait-seconds] to bconsole. This
1489 executes the external-command. Note! normally external-command
1490 should be enclosed in double quotes.
1491 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1492 it should normally be off in a production system.
1494 kes Implement die command for SD so that we can force it to dump.
1495 kes Implement SD lock debug code.
1496 kes Implement new algorithm for keeping Volume list in SD. It
1497 is now owned by the device.
1499 kes Implement new code for freeing in use volumes that should
1500 resolve if not all, some of the problems of multiple drive
1501 tape conflicts described in bug 801.
1503 kes Fix gui/bacula-web/images files in svn.
1504 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1506 ebl Fix a bug in batch mode (in string escape)
1507 kes Correct migration prune SQL typo that crept in in a
1508 recent 2.1.x change.
1510 kes Move bnet_despool() into class in bsock.c
1511 kes Modify job report to include director name and Build OS.
1512 kes Move drop root privilege and check_catalog() before fork.
1513 kes Add update database scripts (version 9 to 10) to updatedb directory.
1515 ebl Check size and age of each file after its backup to see if
1516 it has changed during backup, if 'checkfilechanges' is set.
1517 The FD will do an extra check (stat(2)) after
1518 each file backup. mtime, ctime and size are compared with
1519 'before backup' information. If time or size mismatch, an
1520 error message will be generated. You must upgrade FD to use it.
1522 kes Make database name and user configurable
1523 --with-db-name=xxx --with-db-user=xxx
1524 kes Add back database type to message.c for debugging.
1526 kes Implement dir_sql() which issues an SQL query.
1527 kes Modify bat medialist to use dir_sql() and do some minor C++
1528 formatting as well as eliminating a number of pointers, simplifing
1531 kes Fix some of the mtx-changer grep commands for tape label readers.
1532 kes Convert a number of bsendmsg into the appropriate send/warning/error
1533 message class calls.
1534 kes Suppress the using database message in the .sql command.
1535 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1537 kes Add context menu for floating a window.
1538 kes Some minor cleanup and name changes in qt-console
1539 kes Add doing mt setblk 0 in Win32 mtx-changer.
1540 kes Apply Martin's bug fix to move definition of ENODATA for
1542 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1543 sqlite2 and sqlite3.
1545 kes More pruning cleanup.
1546 kes Turn on wait_for_drive by default in mtx-changer.
1547 kes Turn on Batch insert code by default as it now passes regression.
1548 kes Add ./configure --enable-bat to enable building of Bat.
1549 No install yet though.
1551 kes Implement a new .sql command for bat.
1552 kes Implement code to turn off pruning in obtaining the next volume.
1553 Pruning is turned off for the status dir command, but turned on
1554 for SD requests and for the list nextvolume command.
1556 kes Correct Qmsg() that was not updated correctly when committing a
1557 previous change (probably the recent TLS patch).
1559 kes Write new subroutine is_volume_purged() that explicitly checks
1560 if the Volume is purged, and if so marks it as such. This should
1561 resolve problems reported about needing to mount twice to recycle
1563 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1564 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1565 amount of duplicated code.
1566 kes Do volume pruning only for the Media Type desired (reduces pruning time
1567 if multiple Media Types are in the same pool).
1568 kes Implement more detailed info in the Job report for the Bacula version
1570 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1572 ebl Add bbatch tool to bench database and insert mode.
1573 Fix sql quote stuff in batch mode
1574 Fix sql stuff for mysql
1576 kes Correct problems with am/pm scheduling. Fixes bug #808.
1577 kes Implement new prunning code that prunes up to 1000 jobs at
1578 the same time. The same technique can be applied to a number
1579 of other prune/purge subroutines.
1580 kes Add an insanity check when starting a new tape job to ensure
1581 that the tape position has not been changed. If so fail the
1583 kes Fix Win32 build for dlls to add the folllowing:
1584 src/lib/bsock.c -- new file with new entry points
1585 src/lib/dlist.c -- new entry points
1586 src/cats/sql_create.c -- new entry point
1587 src/cats/sql_cmds.c -- new DATA item exported
1589 ebl batch mode cleanup bscan-test is ok now.
1590 kes Implement SD code to check length of disk volume before appending.
1592 kes Correct return status on db_batch... routines.
1593 kes Add call to db_write_batch_file_records() to migration code.
1594 ebl Fix AfterJob timing
1595 kes Move the checking of the database in initializion of the Director
1596 to after we drop privileges. This avoids the need for both root
1597 and bacula access to the DB.
1598 kes Correct a misplaced variable definition in src/filed/backup.c
1599 kes Correct how the new batch insert db_create_attributes_record()
1600 uses the arguments. Caused a seg fault in bscan.
1601 kes Implement lock() and unlock() methods in DEVICE class.
1602 Implement block() and set_block(xx) methods in DEVICE class.
1603 kes Modify bnet_connect() so that it uses time() to check for the
1604 wait time expiring (on some OSes, some system calls may not
1605 return immediately).
1606 kes Modify Verify to obtain the previous JobId when it is actually
1607 running rather than at schedule time (as it was in 1.38.x).
1608 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1610 kes When checking pid in pid file, continue running if the pid is
1611 the same as ours. This occurs on IRIX after a system crash.
1614 kes Extend new GUI API.
1615 kes Make the ua structure a class, and implement send_msg(),
1616 error_msg(), warning_msg(), and info_msg().
1618 kes Apply fix from for building wx-console on the Mac from
1620 kes Implement new select mechanism for GUI programs.
1621 kes Reorganize initialization of stackedWidgets in bat.
1623 kes Add updated nagios plugin supplied by Christian Masopust.
1625 kes More bat implementation.
1626 kes File migrate bug with Pool Occupancy using mediaid instead
1627 of jobids. Fixes bug #795.
1628 kes Fix orphaned buffers in filed backup and verify due to
1629 crypto buffers not freed during errors. Fixes bug #789.
1630 kes Extend new GUI api code to tree commands.
1631 kes Ensure that tree and dot commands check console ACLs.
1632 kes Permit marking directory with trailing slash.
1633 kes Allow 20 console connections (instead of only 10).
1635 kes Add smartctl call to bacula-sd.conf as an example of getting
1638 kes Modify jobq.c to let simultaneous restore jobs run. This may
1639 cause them to fail if they cannot get a drive.
1640 kes Add Client Connect Wait to Storage daemon to permit users to
1641 modify the time the SD waits for a FD connection.
1643 kes Correct virtual changer check which was backwards. This caused
1644 volumes to be unloaded into slots already occupied.
1646 kes Apply Command ACL filter to JobId list in restore command.
1647 kes Correct typeo in var.c patch.
1649 kes Don't let Bacula prune File or Job records for the current Job.
1650 kes Fix variable substitution pad + inc bug reported (with patch)
1653 kes Correct SQLite log table index as reported by Luca Berra.
1655 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1657 kes Begin implementing new comm signals for API.
1658 kes Fix a few places in lib/message.c where the open fd may
1660 kes Continue implementing lib/bsock.c (real class). Make jcr,
1661 who, host, and port private. There are new methods to access
1662 them for non-class use. This required touching a number of files.
1664 kes Add LANG=C to autoconf/randpass so it works with languages other
1665 than English. Fixes bug #788.
1667 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1669 You will not be able to generate Include/Exclude list any more.
1670 It will be fixed soon.
1671 If you want to use this, you can apply
1672 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1674 kes Restore of sockets created false error messages because Bacula
1675 no longer restores sockets, but the code was still trying to
1676 set the attributes on a non-existent file. Reported by a user.
1677 ebl finish RecyclePool feature
1678 Media will takes Pool.RecyclePool
1679 when moving from Scratch to a Pool or when user will do
1680 update volume=xxx frompool
1681 To use it, add RecyclePool = aPool to your Pool resource
1684 RecyclePool = Scratch
1688 kes Expand new BSOCK class adding signal() and new BNET signals.
1689 kes Begin enhancing the dot commands adding a new API function
1690 that returns more information and will make it easier
1691 to interface to the Director from a program.
1693 kes Make DEVICE fd private. Its new name is m_fd, and can be
1694 obtained with dev->fd() outside the class. This is the
1695 first of many DEVICE members to be made private.
1696 kes Implement Michael Renner's idea on having a virtual disk
1697 changer. I made some minor modifications (e.g. I did not
1698 implement the Virtual Changer directive, but simply set
1699 the Changer Command to an empty string.
1701 kes Implement a BSOCK send() method that writes the whole record
1702 in a single write() request rather than in two.
1703 ebl add update volume=xxx recyclepool=yyyy
1704 volume takes recyclepool from pool when using update volume=xxx from pool
1706 kes Fix encryption deblocking bug, which caused some restored files
1707 to be truncated. This fixes bug #763.
1708 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1709 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1711 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1712 ebl Use btime_t instead of uint64_t in media patch.
1714 kes Optimize the use of the database a bit in the Status dir command.
1715 Only open it when needed, ensure that if any previous database
1716 was opened, it is closed.
1718 kes Correct VolCatBytes bug from media patch.
1719 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1720 in the case of orphaned records.
1721 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1722 and File records in 300K chunks to be more efficient. This
1723 idea came from Juan Luis Frances (if I remember right).
1724 kes Apply Eric's scratch patch that moves a purged Volume to
1725 the RecyclePool. Question: how is RecyclePool set? what
1726 happens to the ScratchPool?
1727 kes Apply Eric's media patch that collects read/write media
1728 times as well as byte counts. This patch requires a
1729 simultaneous upgrade of the DIR and SD. Note, there
1730 should be some way to turn off timing. I'm not sure
1731 times are in Bacula units.
1732 kes Apply Eric's batch-insert patch.
1734 kes Update projects list.
1736 kes Implement Include/Exclude file lists in FD as dlists using
1737 the new dlistString class. This permits efficiently having
1738 large include/exclude lists and completes project Item 25.
1739 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1740 console is authorized to cancel the job. This fixes bug
1742 kes Modify SD so that the VolCatJobs medium record is updated
1743 at the beginning of a Job rather than the end. This
1744 fixes bug #775 where exceeding MaxVolJobs caused jobs
1746 kes Added a mutex around getting and setting Volume information
1747 so that multiple simultaneous jobs will single thread.
1749 Switch to using Subversion
1750 kes Remove src/pygtk-console/ from configure
1752 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1753 plus the entrypoints.
1754 kes Apply patch supplied that corrects debug print
1755 in canceling jobs for max run time. Supplied as
1756 part of bug #621, which was previously fixed.
1758 kes Test on job_canceled() and sd_msg_thread_done inside
1759 loop starting the message thread to avoid a race condition.
1761 kes Remove rl_catch_signal from console.c as it conflicted
1762 with the header definition. Fixes bug #765.
1763 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1765 kes Clarify some stored/acquire messages to indicate if the
1766 problem is with read or append.
1768 kes Fix memory leak with storage ids in cats/sql_get.c
1769 kes Terminate watchdog earlier to avoid reference to released
1770 memory -- reported by Jason Austin.
1771 kes Move closing the database from jobq.c to the director daemon
1772 termination routine. This fixes memory leaks for shadow jobs
1773 (i.e. migration jobs).
1774 kes Free up the unique jobid chain items in migrate.c. This fixes
1775 a memory leak problem.
1776 kes Convert some ugly looking for statements to use foreach_alist
1777 in findlib/find.c. This will facilitate converting the structures
1778 to use dlist (for large include/exclude lists).
1779 kes Fix a bug in the btree.c and btree.h routines, then rename them
1780 rblist and add them to be built in src/lib. Include some new
1781 methods written by Rudolf Cejka that make the code more readable
1782 (hides some of the ugly casting).
1783 kes Add set_next() and set_prev() methods which make the code much more
1784 readable. Also add a new dlistString class that facilitates storing
1785 strings in dlists. To be used in the large include/exclude lists.
1786 kes Make some trivial modifications to lib/tree.h that use rblist
1787 rather than dlist for storing the tree links. This was suggested
1788 by Rudolf Cejka. The result of this is that the restore tree now
1789 uses red-black binary trees rather than simple linked lists. This
1790 should give rather dramatic speed improvements for directories
1791 contining large numbers of directories/files (more than 10000).
1793 kes Fix maxruntime bug #621.
1795 ebl Implement the include JobID in spool file name project.
1796 kes Reorder projects file in order determined by Jan 2007 vote.
1797 kes Implement item #12 on project list -- quick release of FD by
1799 kes Fix open of SQLite3 db where user does not have write permission
1800 so that DIR does not crash. Fixes bug #761.
1802 kes Add back missing @ in Win32 Makefile.
1803 kes Change 'Device not configured to autolabel' from INFO
1805 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1806 which should restart an indefinite # of times.
1807 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1808 other DIR specifications.
1810 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1811 Fix path quoting in SQLite scripts.
1812 Fix problems with SHGetFolderPath.
1814 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1816 kes Fix Job restart on error bug that promotes an Inc to a Full
1817 backup. This should fix bug #755.
1818 kes Add qt-console and first cut of code.
1822 kes Fix Bacula->Documentation link on Win32 to point to index.html
1823 instead of bacula.html. Fixed bug #750.
1824 kes Return JobId in db_get_job_record() when JobId==0. This should
1826 kes Do not release source pointers when restarting a failed job.
1828 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1829 This *should* fix bug #747.
1830 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1833 kes Modify USTORE constructor to set an empty store_source string,
1834 and don't copy the store_source string in a cancel. Hopefully
1835 this will fix Arno's seg fault, bug #744.
1836 kes Add back code to disable conio in configure. Fixes bug #743.
1837 kes Correct the Options scanner in the FD to correctly handle
1838 SHA1 option, which was eating the next option. Reported by
1840 kes Add code to indicate when the SD is spooling, spool wait, and
1841 despooling as requested by Alan Brown.
1843 Version 2.0.0 released: 4 January 2007