1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes If operator has rewind tape, print warning, release tape and
29 try once more. If tape is positioned somewhere, something went
30 wrong, so mark the tape in error and try once more. Previously
31 this error was fatal, now it produces an error message.
32 kes Ensure correct volume name displayed during restore
33 kes Ensure that Volume is mounted for restore.
35 kes Fix a few more Coverity reported problems.
37 kes Apply Allan Black's status dir job count patch.
38 ebl Add information about IMPORT/EXPORT slots in mtx-script.
39 kes Enhance a couple of SD debug messages.
40 kes Tweak unload flag setting and ensure it is set during swap.
42 ebl Fix #1091 about bad output in estimate command.
44 kes Modify autochanger locking to attempt to avoid race
46 kes Make sure device not busy before doing label command.
47 kes Display open() errors except when polling. Previously too
48 many were suppressed. This should fix bug #1070.
49 kes Fix Win32 reparse points. Bacula will not recurse into any
50 reparse point directory, including mount points, unless the
51 directory is explicitly mentioned at the top level (same as
52 with Unix). A file that is linked to another file will be
53 backed up -- much as Unix does for hardlinked files.
56 kes Remove double quotes from ChangeLog and ReleaseNotes
57 kes Remove StorageId test when pruning and recycling (Eric's changes).
58 kes Remove old form of locking when getting volumes -- causes deadlock.
59 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
60 the name unique and to eliminate compile time error.
61 kes Add accurate.o to Win32 FD Makefile
63 kes Fix cats dll build on Win32 after db_update_job_end_record
64 calling sequence change.
65 ebl Switch to tokyo dbm instead of htable in accurate code
66 ebl Include tokyo dbm to bacula source tree
68 kes Fix buffer overruns detected by Coverity.
70 kes Tweak joblog display.
72 kes Implement --without-qwt
73 kes Fix layout of restore tree dialog
74 kes Add configure bat QWT libraries, so that bat can be built
75 with or without the QWT libaries.
77 ebl Add dummy tape driver for regression tests.
78 kes Make sure we unload the right slot when swapping.
80 kes Add debug times, reduce size of two-pool-changer test
82 ebl Tweak autoconf scripts for faketape
84 kes Improve SD reserve debug code.
85 kes Testing an improvement to free up volumes no longer in use.
87 kes Rework SD acquire for read to handle autochanger Volume
89 kes Implement regression that explicitly tests swapping a Volume
90 from one drive to another.
91 kes Enhance disk-changer to detect most error conditions.
92 kes Fix SD code so that it properly swaps a Volume between drives.
95 kes Apply libdbi patch from Joao Freitas for regress and for
96 Bacula trunk. Regress now works with libdbi. Nice.
97 kes Apply .nobackup patch from bug #1077 submitted by
99 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
100 name into jobs cloned via the run directive.
102 kes Prevent a Volume that is being swapped from being freed from
103 the volume list. This will most likely fix, at least partially,
105 kes Fix strippath so that it does not get a buffer overrun and crash FD.
106 This fixes bug #1078.
107 kes Remove 50 millisec wait in SD that broke debugger.
108 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
109 that a job may run, counted from when the job was scheduled.
110 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
111 a job may block waiting for a resource, counted from when the job starts
112 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
113 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
114 that implements multiple commands per line in the console when using
115 readline. Modify the default to use a semicolon as the command separator.
117 ebl Fix SQL query in migration code.
118 ebl Make accurate mode with hash disk pass regression tests
120 ebl Implement first cut of accurate backup with hash disk.
122 kes Force unload of volume when wrong volume mounted in SD.
124 kes Fix bat seg fault at termination.
125 kes Add Bacula generated version to bat about box.
128 kes Experiment with allowing multiple read jobs.
129 kes Move final volume swapping code to DCR method and
130 call it from acquire_for_read().
131 kes When wrong volume is mounted during read, unload_autochanger.
133 kes Integrate the libdbi changes from Joao Henrique Freitas
135 kes Stop searching for Volumes in SD askdir if DIR returns the
136 same volume name twice in a row.
137 kes Close bat console windows first to eliminate error message
140 kes Tweak the swap Volume from one drive to another code so that
141 it now seems to work.
142 kes Resolve several problems with recycling that broke the new
143 code (these problems are in 2.2.9 as well).
144 kes Remove the volume lock when calling the sysop code.
145 kes Don't mark a reserved volume with no writers as unused otherwise
148 kes Rework class structures for VOLRES, DCR, and DEVICE to make
149 the method names a bit more logical, and for more logically
150 handling the responsibilities.
152 kes Remove redundant code in terminating the scheduler that just
153 causes a seg fault in many cases.
154 kes Cleanup releasing a volume and make it a DCR method.
155 kes Improve algorithm for detecting pre-reserved volume and
158 kes Tweak volume swapping code so it works.
159 kes Correct name overloading in mount.c
160 kes Replace released flag in VOLRES with reserved and add access
161 methods for the VOLRES class.
162 kes Prevent volume from being released while being swapped.
163 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
165 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
167 kes Refactor parts of stored/mount.c
169 ebl Add sanity checks for VolWriteTime and VolReadTime
170 ebl Take care of bad clock changes while computing VolWriteTime
171 and VolReadTime. This should fix or limit #1066
172 kes Correct error string numbers in dird/catreq.c
173 kes Restructure reserving, acquiring, and mounting volumes. Calls to
174 autochanger are deferred for mount.c -- simplifes the code.
176 kes Do not prune any running job. It just fails the job.
177 kes Lock the volumes when changing dev->reserved_device and marking
178 the volume unused otherwise the device can get reserved by
179 another job before the volume is released, thus blocking it.
181 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
182 kes Fix bug #1063, reuse of freed ptr in list nextvol.
183 kes Release regex compile buffer in filed/job.c
184 kes Add proper type of const char in sql_create.c
185 kes Turn off debug in daemon termination routines
186 kes Move free_volume_list() before devices are freed in stored.c
187 kes Fix reference to uninitalized stack variables in bregex.c.
188 This should correct bug #1067.
190 kes Fix possible seg fault in SD when freeing a volume entry.
192 kes Implement unload_dev() before swap device.
193 ebl Add statistics prunning with option and menu
194 kes Separate unload_dev() from unload_other_device() in autochanger.c
196 kes Apply patch from bug #1069 that corrects spurious error messages
197 when ACLs enabled on SGI but no ACL exists.
198 ebl Fix small segfault in bacula-sd when debug level is 500
199 kes Modify run_program() and run_program_full_output() to use
200 call by reference for the results string. This corrects a long
201 standing problem where the address of the string may be changed
202 in the subroutine but not in the calling program.
204 kes Re-enable code to remember last volume mounted on a non-tape
206 kes Add patch supplied in bug #1068 that fixes a SD crash when using
207 a Virtual autochanger.
208 kes Generate correct JobMedia records during spooling/despooling when
209 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
210 <tih@hamartun.priv.no> for excellent analysis and testing.
212 kes Tweak hash algorithm for htable using Martin Simmons idea
213 for doing a circular shift.
214 kes Remember what volume is in VTLs (previously turned off for
216 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
217 pointed out some problems in creating JobMedia records during
218 spooling with concurrent jobs. Fix the problem by updating the
219 start file position before despooling and generate a jobmedia
220 record at the end of despooling.
222 kes Fix handling of JobMedia records during spooling and when a
223 Volume is changed without actually writing data to the Volume.
225 kes Rework certain SD locking based on gdb tracebacks of deadlocks
226 sent by Eric. This code now uses only the volume_lock() rather
227 than the reservations lock when at EOM and acquiring a new
229 kes Ensure only one exit point in several subroutines.
231 kes Implement bsock code to permit locking. Use the new code in Verify
232 in the FD to prevent the heartbeat thread from disrupting the Verify
233 data sent to the Dir.
234 kes Modify SD locking to eliminate locking the reservations system from
235 outside the system. Use the volume lock when getting media data
236 and reserving a new volume at end of media.
237 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
238 when SD starts are not locked into place.
240 kes Fix error compiling runscript code on 64 bit machines.
241 kes Tweak Win32 mount point code.
242 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
243 cleared giving bad file estimate).
244 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
247 kes Keep Schedule run lists in order as suggested by
250 kes Implement autostart scripts for Debian.
251 ebl Implement upgrade catalog scripts.
253 ebl Apply jobstat patch for long term statistics. Have to implement
254 purge stats command and upgrade scripts.
255 kes Fix mtx-changer.in for broken Debian mt program.
257 kes Fix large number of JobMedia records reported by Eric Bollengier.
259 kes Apply doc fix from bug #1062.
260 kes Resolve crash and improper restore wx-console Win32 restore
261 GUI. Fixes bug #1065.
262 kes Update Win32 wxWidgets to latest version.
263 kes Attempt to do correct handling of Win32 mount points. Should
265 kes Fix Win32 FD backup/restore memory leak due to improper termination
266 of BackupRead/Write. This fixes bug# 1038.
268 ebl Reduce memory usage for accurate backup, working only with ctime
269 and mtime. (not all Lstat field)
270 About 40MB for my linux system (400.000 files)
272 kes Add dcr->reserved_volume flag that allows us to release a volume
273 even if it is not vol->released. This allows maxvol2 to work when
274 Volumes expire and we are already writing to the device (i.e. a
275 volume is pulled out from under us by another job terminating after
276 we reserve the drive).
278 ebl Permit multiple command/console per runscript definition.
279 RunScript { command = /bin/true ; command = /bin/false ... }
280 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
281 (restart an application) just after the VSS snapshot on windows.
282 kes Don't zap dcr values during release_volume() as they might
283 have the next Volume to be mounted.
284 kes Fix AIX prototype.
286 kes Second cut of drive switching during backup.
289 kes Update Win32 version of wxWidgets to most recent version.
290 kes Tweak Copy job details.
291 kes Rework dir_find_next_appendable_volume to make a bit more effort
292 to find a suitable volume before giving up.
294 kes Make ask_sysop_to_create... to return if waken from wait.
295 This helps get out of blocked conditions.
296 kes Experimental implementation of switch_device in reservations.
297 kes Implement FD version to allow easier protocol changes.
298 kes Add Plugin Options string -- not yet passed to FD.
299 kes Implement PluginOptions ACL.
301 kes Attempt to correct problems with restores with autochangers and
302 use counts going negative
303 kes Rework SD status command and implement API for bat. Implements
304 header, runing waitreservation, devices, volumes, spooling,
305 and terminated status keywords.
306 .status storage=xxx <keyword>
307 kes Clarify TLS error message by adding double quotes around name.
308 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
309 kes Pass jcr to tls routines so debug messages can be handled better.
310 kes Rework jobq resource allocation code, and possibly fix a bug
311 that caused reference counts to get out of sync.
313 kes Rename fd/dir plugin to use Bacula standard underscore.
314 kes Plugin work -- bring dir up to fd level.
315 kes Start implementation of VTL code
316 kes Fix Win32 build after adding new cats subroutine.
318 kes First cut at Duplicate Job implementation.
320 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
321 kes Start PluginOptions string, and refactor a bit of ua_run.c
322 ebl Apply Allan patch that permit to reset recyclepool.
324 kes Test patch -- possible fix or improvement for bug #1053
325 kes Refactor FD and SD status commands to permit new API code in
326 SD, and to fix Win32 build.
327 kes Win32 build is now working.
329 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
330 some ideas in patch from Scott Bailey.
331 kes Begin implementation of duplicate Job control.
332 kes Fix some of Win32 build after recent additions.
333 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
334 which causes the FD to detect whether or not the OS has the
335 honor no dump bit (*BSD systems), and if so, to skip backing up
336 any file with this bit set. The feature is enabled by setting
337 'honor no dump flag = yes' in the Options section of a FileSet.
339 kes Correct po warning message with datarootdir
340 kes Implement more code in dird.c to put configuration parsing in
341 a class rather than use globals.
342 kes Restructure SD status command for implementation of bat API
345 kes Suppress incorrect 'Will not descend from x into y' messages.
346 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
347 daemon globals used by parser.
348 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
350 kes Fix free of plugin_list when none exists.
352 ebl Apply accurate project patch.
354 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
355 on non-mempool object)
356 kes First cut of converting FD .status to work with bat API.
358 .status client=XXX header
359 .status client=XXX running
360 .status client=XXX terminated
361 kes Implement first cut of Copy Job.
362 kes Implement Catalog in Pool resource. It overrides catalog specified
363 in the Client resource.
365 kes Apply patch (with some difficulties) from Joao Henrique Freitas
366 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
368 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
369 ftruncate() actually works. In the case of some (cheap) NAS devices,
370 it does not, and so recycling NAS Volumes does not work. The code
371 simply unlink()s the file, then recreates it. This fixes bug #1011.
373 kes First incomplete cut of big malloc blocks for htable.
374 kes Tweak plugin code.
376 kes Plugin debug code + tweak a couple bat dialog layouts
378 kes Fix creating first JobMedia record during Migration to include
379 proper index. This caused slow restores of migrated jobs.
380 kes Temp fix to plugin name file_index.
381 kes Bacula backed up and restored a MySQL database.
383 kes Implement plugin restore.
384 kes Implement parsing of db_driver to give db_type index.
386 kes First cut of plugin restore code.
387 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
388 and do not strip paths on symbolic links.
389 kes Set catalog backup database and user name from values specified on
390 the ./configure line.
391 ebl Fix #1031 about wrong pool source information in job report.
394 kes Remove a redundant jcr argument to find_files, match_files, and
396 kes Implement '.status dir header|scheduled|running|terminated' that
397 prints the requested status section. With the exception of the
398 header, the other reports have fields separated by tabs (\t).
400 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
401 a resource embedded run command to find a since time if no explicit
402 since time was supplied on the command line.
403 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
404 that updates the state file at job termination time in addition to
405 when the daemon terminates.
407 kes First version where a plugin did a backup.
408 bpipe-fd.so created a backup file, wrote a test
409 string to it, and Bacua could restore this fabricated file.
411 kes Implement DB Driver = string for the DBI driver.
412 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
413 kes First cut of code for loading Win32 plugin dlls. Implement
414 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
415 and implement a dlfcn.h file based on opengroup's definitions of
418 kes First cut plugin directives.
420 kes Apply patch from bug #1049 to prevent stripping the path on a
422 kes Attempt to fix bug #1047 where stripping a path corrupts the
423 heap. Waiting for feedback.
424 kes Correct the Mount message not to suggest labeling a new tape
425 when doing a restore. Submitted by email by John Stoffel.
426 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
427 FD by using casting. Reported in bug #1042.
429 kes A bit of crypto cleanup. More later.
431 Release Version 2.2.8
433 kes Apply patch from Martin to correct bug #1040, bscan sets existing
435 kes Fixed important spelling error in doc -- bug #1045.
437 ebl Fix bextract to be able to extract non-portable Win32 data to
439 kes Move initialization of read/write res lock earlier in the code.
440 This fixes the crash with a null conf file. This fixes bug
442 kes Redefine CURES in lib/parse_conf to be URES and move it all
443 into lib/parse_conf.c -- this responds to bug #1042, but does
444 not fix it. The fix is not to compile with FORTIFY_SOURCE.
445 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
446 the trunk SVN. I don't think this was reported as a bug.
448 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
450 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
452 kes Add DataDespooling and DataCommitting status (committing is
453 the last despooling).
454 kes Finish implementation of new reservations code noted below.
456 kes Fix bsnprintf for float point numbers. I broke recently when
457 parameterizing some variables. This fixes bug #1036.
458 kes Undo recent reservations changes ... will apply them later
459 when they work better.
461 ebl Fixes #1034 which cause mysql to hang the connection after 8h
462 ebl Change default statistics target of filename.name and path.path
463 fields for PostgreSQL. This speeds lookup by indexes. Thanks
465 kes A few more tweaks to new reservation code. Make sure to clear
466 vol released flag when retaking volume. When reading label and
467 label is bad mark volume unused. When recycling, mark volume
468 unused so it can be renamed.
470 kes Fix reserve_volume() so it doesn't release a volume in use
471 (i.e. a volume entry not marked released). This should be
472 the last part needed to fix bug #1018.
474 kes Move Heartbeat documentation from Job to Director resource.
475 This fixes bug #1033.
477 kes Fix existing switch drive SD code to call autochanger to release
478 any old volume. This must be done to keep the autochanger from
479 releasing subsequently newly reserved volumes in doing a close().
480 This should fix bug #1018.
481 kes Fail if attempting to get console input in batch mode. This
482 should help fail RunScript console commands that are incomplete.
483 kes First cut implementing switch_drive() in SD (not actually called).
485 kes Implement first cut running console commands in a RunScript.
487 ebl Fixes bug #1028 where 'Selection Type' option was not usable
489 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
492 Release Version 2.2.7
494 kes Add new free_tls() entry point so that Win32 builds.
495 kes Fix compile warning in src/lib/util.c
496 kes Fix entry point for edit_job_codes() so that Win32 builds.
497 kes Fix seg fault Frank Sweetser reports in regression testing
498 on his systems. The problem was that the original author of
499 bsnprintf.c did not take into account the side effects of
500 using ++x in the argument to a #define.
501 kes Make SD protocol backward compatible with version 2.2.x.
503 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
504 because Bacula no longer restores sockets.
505 ebl Always use ignorecase fileset option on win32 FD.
507 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
508 that implements double quoting include names in conf files,
509 and also allows piping input by having the first character
510 be a vertical bar (|).
511 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
512 that implement %f in RunScripts to pass the FileSet name.
513 kes Skip leading | when lex input comes from a pipe as suggested
514 by Michael Stapelberg <michael@stapelberg.de>.
516 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
517 Nerijus Baliunas <nerijus@users.sourceforge.net>
519 kes Implement Plugin Directory and plugin events.
521 kes Implement a security enhancement: TLS authentication but no
522 encryption. Enabled by setting 'TLS Authentication = yes'.
523 Note when this is on, TLS encryption is turned OFF!
525 kes This patch corrects a problem where the maximum concurrent storage
526 jobs counter gets out of sync during restore jobs causing jobs to
527 'wait on max Storage jobs'. This patch fixes bug #1009.
529 kes This patch fixes bcopy so that it produces correct Volumes.
531 kes This patch eliminates spurious output to the console during a VerifyVolume
532 job that contains encrypted data. It fixes bug #1024.
534 kes This patch prevents the 'status dir' command from trying to use a scratch
535 volume and possibly moving it from one pool to another. This patch fixes
538 kes Add new include to postgresql.c suggested by Marc Cousins so
539 that it compiles correctly with pgre version 8.3.
541 kes Fix --archivedir addition to configure. Replace it with
542 --with-archivedir in configure.in This fixes the regression
544 kes This patch fixes bug #1012 where the job is canceled because
545 of Max Run Time exceeded when the job has not yet started.
547 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
548 one 'part' to write. Instead of each part being stored on disk,
549 written to DVD, then deleted from disk, all parts are written to disk,
550 and only the last is written and deleted from disk.
551 kes This patch fixes the status command to include the formating string for
552 JS_AttrInsterting. It fixes bug #1021.
553 kes This patch should fix the Mac OS X build problem on the latest
554 Darwin, where sys/types.h was not included correctly (apparently
555 due to a change in the Mac headers). The solution was to explicitly
556 ensure that it is defined for the ./configure.
557 This patch also has a rebuild of configure that includes the Debian
558 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
559 kes This patch should ensure that queued messages to the console are
560 displayed as soon as possible. It should fix bug 1007, but has been
561 reported not to work.
563 kes This patch fixes the infinite loop when trying to increase the
564 maximum number of volumes in a Pool during the add command.
565 This patch fixes bug #1008.
567 Release Version 2.2.6
569 db Remove extra data on estimate command in joblist for bat.
571 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
572 really change anything, but is the beginning of doing it *right*.
573 To do it completely right the LastWritten date must be passed to
574 the SD, but it is not yet done.
575 kes Minor tweaks to some bat restore SQL.
576 kes This patch fixes bug #1003 where putting the message output from
577 a Verify job into the catalog results in a recursive loop. The problem
578 seems to show up only with postgresql (to be verified).
579 kes Correct %x to %p in postgresql debug statement.
581 kes Fix bug #942 where lots of emails where generated when the heartbeat
582 interval was low and Bacula wanted a different tape from the one in
585 ebl Add new SD despooling attributes and Dir inserting attributes
586 job status codes in the catalog (Status table).
588 ebl Use qmake-qt4 instead of qmake when available (debian system).
590 kes Add a security warning to src/cats/make_catalog_backup.in indicating
591 that passing the password via the command line (arg 3) is insecure.
592 This responds to bug #990 (it doesn't fix it).
594 kes Set default debug_level to zero. This corrects bugs #991 and #993.
595 kes Fix a crash in bat when it cannot connect to the Director for example
596 if the Director is not running.
597 kes Remove redundant INDEX (JobId) from File table in the trunk.
599 kes Make explicit exception to GPL in LICENSE to permit linking
600 the Win32 FD with Microsoft VSS code.
601 kes Apply the Solaris package patch from
602 Masopust, Christian <christian.masopust@siemens.com>
603 kes Apply the patch to optionally add a timestamp in the debug output
604 submitted by Mariusz Czulada <manieq@wp.eu>.
606 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
607 backend (sql_strerror). Fixes bug #989
609 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
610 It applied with no problems.
611 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
613 kes Redirect stderror to stdin on mt status command in mtx-changer.in
614 since the status is returned on stderr on Solaris.
615 kes Activate Close button on tray-monitor window. This fixes
617 kes Check for NULL item in parse_conf.c before calling it. In the
618 case of Device, there is no item and this caused a seg fault when
619 Device appears in the conf file.
620 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
621 avoids pulling in config.h multiple times in some new code.
623 kes Fix spurious warning message printed when creating a volume with
624 a LabelFormat. This fixes bug #976.
626 Release Version 2.2.5
628 kes Add JobId in place of Job name in all the Jmsg() output.
629 kes Correct the APP_DESC for the Win32 storage service (remove an e).
631 kes Make maxvol-test and new more strict maxvol2-test work.
632 kes Print JobId in all Jmsg() job output.
634 kes Add new SD despooling attributes and Dir inserting attributes
635 job status codes. This fixes bug 961.
636 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
638 kes Fix doc issue. This fixes bug #963.
639 kes Fix listing performance problems in bat. Pointed out by
641 kes Remove old debug code.
642 kes Fix bat code that tests for Win32. This should fix bug #968
643 kes Query 5 list wrong Vol after migration. This fixes bug #960
645 ebl Fix #969 where user can't change Replace option in restore menu.
647 kes Save jcr in thread specific data (tsd) for each thread.
648 kes Make Dmsg() print JobId as -%u.
649 kes Make Jmsg, Emsg, and others automatically pickup the jobid
650 for the thread if it exists.
651 kes Remove old reservation debug jid code.
652 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
653 ebl Add an option that permit to specify spool size in job
654 definition. (Applying patches/testing/spoolsize_per_job.patch).
655 You must upgrade SD and DIR at the same time.
656 dvl Add new configuration item --archivedir
657 dvl Adjust regression tests to use tmp not /tmp. This will allow
658 multiple concurrent runs of the regression tests.
660 kes Fix race condition that drops final block written to volume.
661 This happens in rare cases with multiple simultaneous jobs
662 when the Volume fills. This fixes bug #964. May be related
663 to bug #935 and possibly #903.
664 kes Eliminate more strerror() and replace with bstrerror().
665 kes Remove BSD getopt and replace with unrestricted IBM version.
666 kes Fix Win32 build for changed calling sequences.
667 kes More tweaks to the mount volume routines to get everything
668 right. Changed variable name from find to have_vol, which is
669 much easier to understand.
670 kes Enhance btimer debug code.
672 kes Fix FD->SD authorization failure, which was due to spurious
673 wakeups from a pthread_cond_timedwait(). Simply check the
674 predicate before continuing. This fixes bug #953.
675 kes Add const char where needed (more to do). Remove temp debug code.
677 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
678 kes Don't overwrite error message in check_tables_version.
680 kes Unlock batch insert tables with same calls used elsewhere.
681 kes Allow starting 59 jobs a second.
682 kes Make SD session key more random.
683 kes Add retry for SQLite opening db if it fails. Probably helps
685 kes Suppress extra error messages during batch insert failure.
687 kes Add jcr to timer packets so if killed message can be sent to job.
688 kes Add JobId to all Dmsg() output.
689 kes Put some FD auth code on dbglvl rather than fixed.
690 kes Return insert attributes error message in db msg buffer to avoid
691 false error messages. Helps fix bug #966.
692 kes Separate batch init error messages. Probably helps fix bug #966.
693 kes Make SD code that contructs attribute insert check string lengths
695 kes If Dir gets an error during inserting attributes, cancel SD.
696 This reduces unnecessary error messages.
698 kes Correct search boolean for getting Volume info
699 ebl Cleanup batch insert code. Probably fixes bug #965.
700 kes Back out one small change to the reservation system (reserving a volume).
701 kes Rework how a Volume is mounted. It is now much more intelligent and
702 will always attempt to use any mounted volume if possible and reduces
703 calls to the Director asking about volumes.
705 kes Turn off some code when batch insert not enabled.
706 kes Edit FD name in connect error messages.
707 kes Rework the reservation system to take into account that the Director
708 might give us a Volume that is different from the current one being
709 used, and to ensure that we don't exceed Maximum Volume Jobs.
710 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
711 fatal error with multiple jobs running'
712 kes Add more debug code in reservation system.
713 kes Implement maxvol-test to check bug #947.
715 kes Add code to handle tray monitor separated from Win32 FD.
716 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
718 kes Add missed return in fixing verify bug -- trunk only.
719 ebl Fix a command parser issue causing a director segfault.
720 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
722 kes Increase the max block size to 4MB fixes bug #957.
723 kes ERABT if user sets min block size > max block size. Fixes bug #956.
724 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
725 is not properly mounted (recognized) during a poll.
726 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
727 Job that has differences reports Verify OK.
728 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
730 ebl Add an option to operate on all pools with update vol parameters.
731 This complete the project 20. Patch from Nigel Stepp.
732 ebl Add history support to bconsole when using readline.
733 Using Ctrl-D to exit doesn't update .bconsole_history
734 kes Modify new volume algorithm to use max MediaId for generating next
735 volume number rather than the count of Volumes. This should essentially
736 eliminate the failure rate if some volumes were deleted. Bug #921.
737 kes Begin implemention of Optimize Job Scheduling.
738 kes Implement restore callback that Dirk and I agreed on for bat
739 restore. This fixes bug #928. Restore of backup of zero files fails.
740 kes Fix SQL Catalog logging which broke with new db_escape_string
743 Release Version 2.2.4
745 kes Fix bacula_cats.def for new db_escape_string().
746 kes Increase size of name string when FD making connection to SD.
747 May fix bug #953. FD->SD connection failure.
749 kes Add code to help Dan debug 2drive-incremental-2disk test.
750 kes Add code to try to fix bug #908.
751 kes Add waits to multiple exit detection code to try to force pid
752 file to always be deleted.
753 kes Restore good dev.tar.gz to rescue set appropriate binary property.
755 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
756 trying to switch drives by checking for blocking before unblocking.
758 kes Cancel storage daemon in all cases where FD reports error. This
759 should fix virtually all cases of bug #920.
760 kes Fix db_escape_string() for MySQL which did not compile.
762 kes Fix error message that was clobbered when Dir tells SD it does not
763 have write permission on Volume. This should fix a minor point
764 in bug #942, but not the main problem.
765 kes Add code to cancel job in SD if FD connection fails. This should
767 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
768 dvl Pass jcr and db into db_escape_string() to enable better escaping
770 kes Fix migration code to get correct Volume name with multiple volumes
771 by skipping |. Fixes bug #936.
772 kes Implement patch supplied by Landon to fix bug #944 where using
773 TLS with bconsole uses 99+% of the CPU.
774 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
776 kes Move patches into patches directory.
778 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
781 ebl Using 'm' in bconsole will show messages like before,
782 and not memory usage.
783 kes Fix bug #935, and probably also bug #903 where files were not
784 restored. MediaId was not properly set in JobMedia record after
787 kes Suppress chown and chmod error messages if the FD is not running
790 kes Apply Martin Simmons' patch that should turn off the new API usage
791 when batch insert is turned off allowing building on older
793 kes Add ./configure search in qwt-qt4 for qwt package
795 kes Bacula is now free of 3rd party GPL copyrighted code!
797 kes Add guid_to_name.c/h which replace idcache.
798 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
800 ebl Detect if new PosgreSQL batch insert API is present.
801 kes Correct incorrect mempool call causing Director crash. Occurs on
802 systems without va_copy().
803 sb Update spec files for 2.2.1 release
805 kes Fix memory pool call in ua_output.c. bug #934.
806 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
807 Add test program to fnmatch.c
809 kes Integrate patch to README.vc8 from
810 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
811 edit it to get it into Unix patch format.
812 kes Implement mkpath.c to replace old FSF makepath.c
814 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
816 Release Version 2.2.1
818 kes Update POTFILES.in
819 kes Cleanup a few underquoted AC_DEFUNs in configure
820 kes Apply patch from Martin Simmons that adds a test for va_copy to
823 kes Fix bug #921 by increasing the number of tries to create a new volume
825 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
826 can be called multiple times. Implement a version for machines
827 without va_copy() that gets a big buffer.
829 kes Integrate more portable zone offset code into bsmtp.c
830 Submitted by Attila Fülöp.
832 kes Fix bad SD->FD return status reported by
833 (James Harper) <james.harper@bendigoit.com.au>
834 ebl Fix a bug in read_close_session which return random status
835 thanks to James Harper
837 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
838 and directory names during restore of single file/directories.
839 kes Add sanity checks to .sql command when string is empty. Hopefully
840 that will resolve Dirks Director crash.
842 kes Apply patch submitted by Martin Simmons that corrects a seg fault
843 in the bsmtp chat subroutine when debug is >= 10.
845 kes Fix Director crash when running bat SQL queries.
846 kes Add David's notes on Item 8: Copy pools.
848 kes Rework projects file to be current and ready for a vote.
849 kes Enhance lex scanner error message.
851 kes Tweak LICENSE file to mention BSD code.
852 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
853 if specified on the ./configure.
854 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
855 This class is intended to allow us to open a second bsock to the
856 Director while in the restore subdialog.
858 kes Fix configure to create bat Makefile before creating dependencies.
859 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
860 kes Add a tooltip to the tray monitor.
861 dvl Set the Director's PID file before dropping privs. This fixes
864 kes Update AUTHORs file
865 kes Increase the default max concurrent jobs to 20 in FD and SD to
866 correspond with the default .conf files.
867 kes Rewrite the Win32 service routines. This eliminates the 3 copies
868 some different, of the same file created by RN when porting the
870 kes Rearrange some of the Win32 directories and the placement of the files
872 kes Set DEVELOPER flag in version.h
874 ========================================================================
875 Release Version 2.2.0
877 kes Apply a second doc patch from Marc.
878 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
879 improves the tips section that discusses how to setup multiple
882 kes Update bat README file.
883 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
884 corrects a typo in the Recycle status check in db_find_next_volume().
885 This will probably fix a number of annoying problems with multiple
887 kes Modify most of dird/msgchan.c to use bsock class calls rather than
888 bnet calls -- no functionality change.
890 kes Modify the Verify output to specify if files are missing on
891 the Volume(s) or disk. Fixes confusion in bug #916.
892 kes When more than one Volume is read in a migration job, the last
893 Volume bytes reported are from the last read volume rather than
894 the last written volume. Fixed. This fixes bug #910.
895 kes Fix display of Recycle flag after update volume=foo recycle=yes.
896 It previously printed New Recyle flag is: no. This fixes bug
899 kes Correct seg fault when switching tape drives during restore.
900 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
901 be used until after 2.2.0 release.
903 kes Remove fnmatch() in SD that permitted wild card specifications.
906 kes Fix %g in filename returned by SQL for browse tree reported by
908 kes Fix configure so that it puts config.out in the cwd rather than
910 kes Attempt to fix the locking problem reported by Eric in bug #906.
911 kes Make berrno class to leave errno unchanged after constructor call.
912 kes Make bnet_server use the heap rather than the stack to allocate
913 its socket fd pointers to avoid a crash at termination. Problem
914 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
916 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
917 and putting it in depkgs-qt along with Qt4.3.
919 kes Rework code in acquire.c that switches drives for reading when
920 the Media Type does not match. This should fix bug #906
922 ebl Fix a director segfault during job setup #907
923 kes Correct seg fault in postgresql when first operation returns no
924 rows. Fixes Dirks File browser problem seg fault with bat.
926 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
927 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
930 kes Implement PopUp YES/NO dialog for bat.
932 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
934 kes Correct RunScript to terminate job in FD on failure.
935 kes Change abort_on_error and AbortJobOnError to fail_on_error
936 and FailJobOnError in RunScripts.
937 kes Minor tweaks of code formating in RunScripts, principally to
938 avoid depassing 80 columns.
940 kes Eliminate one #ifdef Win32 in bsmtp
941 kes Implement grow tool to grow a file for testing very large databases.
942 kes Add big-vol-test to test Bacula seeking with > 5GB.
945 kes Modify find_next_volume() to return all values in Media record.
946 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
950 kes Update Release notes
952 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
953 Warning, in previous beta version, all media get from scratch keep their
956 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
957 This should fix bug #842. Made a note to look at removing the temp
958 files at the end of the install.
959 kes Add ability to mount and unmount a file device providing it is
960 marked as being removable and has the appropriate mount and unmount
961 commands defined in the Device resource. This fixes bug #830.
962 kes When applying a storage override, release all previous storage
963 definitions rather than just prepending the new storage.
964 This should prevent a good deal of confusion.
966 kes Implement ./configure search for qwt libraries.
968 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
969 Win32 FD. This should fix bug #893.
970 kes Remove an unnecessary beep in Win32 init code.
971 kes Update copyright dates in Win32 executable about boxes.
972 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
973 code with a BSD getopt.c and getopt.h.
974 kes Remove sched.h from the Win32 compat directory -- not used.
975 kes Remove the Exit menu item from the Win32 tray monitor. If you really
976 need to shut it down, do it through the services panel or the command
978 kes Remove some inappropriate Bacula FSFE copyrights.
979 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
980 kes Fix regress config non-portable test as pointed out by
981 Florian Heigl <florian.heigl@gmail.com>
982 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
983 as pointed out by Florian Heigl <florian.heigl@gmail.com>
985 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
986 Reported by Frank Sweetser.
990 kes Fix client-only build.
991 kes Integrate client-only fixes for bsys (initgroups) and conio from
992 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
993 kes Make arguments to get_scratch_volume() in same order as other
995 kes Rework the prune_volumes() subroutine so that after purging and
996 no volume found in desired pool, it will check for a scratch
997 volume. This prevents recycling the whole scratch pool.
998 kes Add code to status storage to print boffset_t (largefile support).
1000 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1001 kes You now need a --with-qwt=<dir> to be able to build bat.
1002 kes Update src/win32/cats/bacula_cats.def to include the new
1003 db_get_query_dbids() call on Win32.
1005 kes Correct a problem when selecting a scratch volume and moving
1006 it to another pool that lost some columns.
1007 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1008 kes Enhance Autochanger error messages to include Volume and device name.
1009 kes Rework prune_volumes() code to take account of InChanger flag,
1010 and to handle recycling volumes going to the Scratch pool and
1011 current pool because the RecyclePool directive.
1012 kes Implement a better and more efficient db_get_query_dbids() to
1013 handle creating and passing back a list of DBIds.
1017 kes Start work on new more efficient DBId subroutine. First use
1018 will be for recycling volume to Scratch inchanger.
1019 kes Increase number of JobIds in pruning from 1000 to 10000.
1020 This to be replaced by above routine.
1021 kes Begin implementation of building Qt4 on Win32.
1022 kes Correct typo in fix I added for bad TLS shutdown.
1023 kes Pull 2.0.3 patches into patches directory.
1024 kes Update Release notes. Include qt-console in line count.
1025 kes Update Projects file.
1027 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1028 bug in migration code where a job that spanned two volumes
1031 kes Implement new BST_DESPOOLING blocked state. Change from locking
1032 during despooling in SD to blocking. This means that other threads
1033 can work with the device structure, in particular the reservations
1034 system while despooling.
1036 kes Fix return in reservation message queue that missed clearing
1037 the jcr lock (implemented 26Jun07 below).
1038 kes Rename a number of dev methods to make locking function names
1040 kes Document locking in lock.c. Move lock structures to new file
1043 kes Move reservations message lock to lock jcr only this
1045 kes Move main SD locking code into lock.c (new file).
1046 kes Update Win32 build to include lock.c
1050 kes Dirk committed the qwt library code for drawing graphs in bat.
1051 kes Tweak install of qwt so that it is integrated with ./configure.
1053 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1054 out by Eric (my typo).
1055 ebl Fix configure.in to get batch mode enable
1056 kes Return correct string from authenticate.cpp in bat when connecting
1058 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1059 spurious line drops when using TLS.
1060 kes Do not file reparse points when restoring a file that already
1063 kes Implement Windows reparse points -- similar to directories, but
1064 we do not descend into it. This is a first cut. They seem to
1065 be backed up, but restore is not yet tested.
1066 kes Remove restore_blocking in tls code when shutting a socket to leave
1067 it in blocking mode. Hopefully this will fix the encryption bug
1068 reported by Frank Sweetser.
1069 kes When opening a file for backup, tell the OS that we are going to
1070 read it sequentially -- optimization.
1071 kes Change variable names in authenticate_director() to not conflict
1072 with member names in bat. Caused great confusion with compiler,
1075 kes Queue openssl error messages in case of comm problem.
1076 kes Do shutdown() call if socket terminated.
1077 kes Remove some duplicated code in tls.c
1078 kes Move more of the bsock member variables into private and access
1080 kes Add Frank Sweetser's tls-test to the regression suite.
1082 kes Add Swedish sv.po file
1084 kes Don't print clock skew message in FD if less than 3 seconds diff.
1085 kes Add a bit of VSS info to status client.
1086 kes Implement a first cut of Vista VSS, using Win2003 code.
1088 Release: 2.1.20 beta
1090 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1091 loaded tape but uses first drive).
1092 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1093 This was indeed a Win32 issue.
1095 kes Simplify search of autochanger for in-use Volume.
1096 kes Fix exit condition of check for in-use volume. kes Remove
1097 inappropriate my_postgresql_free_result() in db_close()
1099 kes Fix bad return in FD when encryption signature not found.
1100 Probably caused a crash.
1101 kes Inhibit missing encryption signature error messages for
1102 file types where no signature computed.
1103 kes Correct inverted check on autochanger in reservation system.
1104 kes Tweak debug code in autochanger reservation.
1106 kes Add some additional locking in the cats directory in subroutines
1107 that modify packet variables called from batch insert.
1108 kes Rework how dcrs are allocated. new_dcr() can now be called
1109 with an existing pointer, and it will simply clean it up.
1110 This allows the reservation system to test various different
1111 devices, and will permit easy device changes.
1112 kes A bunch of changes all over to handle new new_dcr() calling
1114 kes Work more on the Volume management in the SD. Remember Volumes
1115 for tape drives and for autochangers (even virtual disk changers).
1116 kes When looking at the Volume list to reserve a drive, handle
1117 autochanger names correctly by interating through the changer
1118 devices. Also call the Director to see if a Volume is suitable
1119 for the current job.
1120 kes Fix some bugs in bscan. Make sure all media records are written.
1121 Make sure that valid JobMedia records are written for disk files.
1122 Previously they were completely wrong.
1123 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1124 that the URLs don't change and so that the developers will all
1125 work off the same copy. Rebuild from scrach.
1126 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1128 Release: 2.1.18 beta
1130 kes Fix seg fault in FD from incorrect digest size.
1131 kes Fix argument to non-OpenSSL crypto.c subroutine.
1133 Release: 2.1.16 beta
1135 kes Remove a few malloc()s from the encryption code.
1136 kes Use the class calls to bsock in filed/backup.c and restore.c in
1137 place of the old bnet_xxx code.
1138 kes Implement code that does an on the fly calculation of the
1139 signing digest during restore of encrypted files. It makes
1140 a best guess at the algorithm, and if it is not correct, will
1141 then revert to the old code which reads the file after it is
1143 kes Implement at least one missing crypto stream in stream_to_ascii()
1144 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1145 #877 where a reload with bad syntax causes Dir to exit.
1147 Cut: 2.1.14 beta (not released)
1149 kes Do not free a volume on a tape drive until another volume is
1150 mounted and read, or the autochanger unloads the volume.
1151 This should help the SD re-use volumes that are already mounted,
1152 and should fix bug #886.
1153 kes Apply patch from user brettedgar that allows gnome2-console include
1154 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1155 kes Apply patch from Lucien Weller that fixes day of week calculation
1156 because of DST flag problem. Fixes bug #887.
1158 kes Move find_next_appendable_volume() to after acquiring a valid device
1159 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1161 kes Unable to reproduce bug 872. However added additional testing for
1163 kes Bug #874 resolved by documenting SQLite limitations.
1164 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1165 kes Bug #881 resolved by removing typo in mtx-changer script.
1166 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1167 approval. Added a link to the wiki on the web page, and implemented
1168 a backup from http://paramount.ind.wpi.edu
1170 kes Fix update allfrompool to pass pool name.
1172 kes Convert to pure GPL v2 license.
1173 kes Fix sscanf problems reported by Peter Buschman that caused
1174 a bus error on Solaris.
1175 kes Rework (simplify) the select prompt in bat.
1176 kes Move get_jobid_from_tid() into lib and create a
1178 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1179 should definitely fix the problem of lost error messages in the
1181 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1182 kes Eliminate tcpd.h from the project. Enclose the #include from the
1183 library with extern C ...
1184 kes Add print of signal name when a signal is trapped.
1186 Release: 2.1.12 beta
1188 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1190 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1191 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1192 makes SQLit3 run 30 times faster, though a bit less safe.
1193 kes Implement --with-batch-insert in configure and detection of thread
1194 safe libraries. It is on by default, but turned off if no thread
1195 safe library (e.g. SQLite 2) is available.
1197 kes Fix Bacula PostgreSQL buffer overruns.
1198 kes Do better checking for NULL results returned from PostgreSQL;
1199 implement retry for failed queries; clear results buffer after
1200 failed query. Hopefully this will correct the PostgreSQL failures.
1202 kes Implement algorithm to handle only one appendable volume with
1203 Prefer Mounted Volumes = no.
1204 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1205 returned from a query.
1206 kes Make volume lock recursive.
1207 kes Implement an additional volume reservation algorithm that
1208 starts by considering all reserved volumes then uses the
1209 old brute force algorithm of searching the resources to
1210 find a suitable device.
1211 kes Add new reservations debug code and refine the old code.
1212 kes Update the win32/dll/bacula.defs file.
1214 kes Tweak reservations algorithm to permit a few more cases, i.e.
1215 volume reserved, but on different drive, ...
1216 kes Enhance SD status to include Pool and Media Type for drive in a
1217 more readable format (a bit longer).
1218 kes Fix PostgreSQL double free.
1220 kes Minor refactoring of restore decryption code.
1221 kes Add code to smartall.c to detect double free of a buffer.
1223 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1224 so that bsmtp will create a correct email address (mailbox only).
1225 kes Modify 'memory' command so that the buffers are listed as 'In use'
1226 to avoid confusion with Orphaned buffers.
1227 kes I reworked the OpenSSL include/lib flags to be handled in
1228 the standard Bacula way, which should fix bug #863 concerning
1229 non-standard OpenSSL libraries.
1231 kes Implement Help Browser window for bat.
1232 kes Fix reload bug that reset StorageId to zero.
1234 kes Fix TLS #ifdefing when TLS turned off.
1235 kes Ensure that when labelling a tape with Slot=0 that InChanger
1237 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1239 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1240 add DISTINCT (required by PostgreSQL).
1241 kes Implement BSOCK authenticate_director() method. Eventually will
1242 authenicate all daemons.
1243 kes Move several more functions into the BSOCK class.
1245 kes Add code to tell the OS that we no longer need a cached
1246 file that we were reading. In findlib/bfile.c. Also,
1247 only cache files that we are reading. Thanks to
1248 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1249 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1250 kes Implement script to automatically generate cats and dll .def
1251 files for Win32 dll.
1252 kes Update README.mingw32 to include new .def file generation.
1253 kes Correct typo in UTF-8 error message as reported by:
1254 jhernandez <julianhernandez@gmail.com>
1255 kes Add additional sm_check() code on debug level 1.
1256 kes Set default debug level to 1.
1257 kes Trap SIGABRT in attempt to get traceback.
1259 kes Reduce bat connect timeout from 30 to 15 seconds.
1260 kes More restructuring and implementing BSOCK class in place of
1262 kes Remove a few unnecessary malloc() tests in crypto code.
1263 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1264 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1265 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1267 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1269 kes Fix Verify InitCatalog. The attributes were not pointing to the
1270 correct saved location.
1271 kes Implement message callback so that GUI is sure to get all
1272 daemon messages. Currently displayed in a dialog in bat.
1273 kes Ignore SIGUSR2 (Bacula timer) in bat.
1274 kes Apply regress patch from bug #859 to allow regress to work
1275 with Solaris compiler.
1277 kes Begin adding TLS support to bat.
1278 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1279 clean up lex.c and make it more readable.
1281 kes Move more bnet functions into the BSOCK class.
1282 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1283 kes Complete change of berrno strerror() method to bstrerror()
1285 Release: 2.1.10 beta
1287 kes Cleanup incorrect email addresses in bsmtp.
1288 kes Make bat display initial messages rather than discard them.
1290 kes First cut of adding .mod to the run command.
1291 kes Implement auto display of messages in bat.
1292 kes Enhanced preferences to allow all Bacula output to be
1295 kes Try to make bsmtp date routines more generic.
1296 kes Fixed bug #856 autochanger documentation.
1297 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1298 kes Add new cats entry point so Win32 builds.
1300 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1302 kes Do better checking for the MySQL 64 bit libraries looking for both
1303 .a and .so libraries.
1304 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1305 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1306 kes Require the thread safe version of MySQL during configure. Thanks
1307 to Andre Noll for pointing this out.
1308 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1309 continuing in migration code.
1310 kes Apply implementation of tray-monitor font derived from gnome-console
1311 submitted by Andreas Piesk <a.piesk@gmx.net>
1313 kes Eliminate important memory loss in SQLite
1314 kes Fixed the batch insert MySQL thread specific data that was not
1315 being freed. See cats/mysql.c:db_thread_cleanup().
1316 kes Fix restore before command.
1317 kes Convert old hdr.name to name() in a few places.
1318 kes Implement update jobid command.
1319 kes Return all time_t dates in db_get_job_record()
1320 kes Stop watchdog in SD earlier.
1321 kes Put Pool just after Storage in please mount message.
1322 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1325 kes Update the po files.
1326 kes Fix Verify InitCatalog by making it cache attributes.
1328 kes Change name bacula-bat to bat for man 1 page to correspond to
1330 kes Check for client and store NULL pointers in status command. This
1332 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1333 kes Fix sign extended editing of %p.
1334 kes Clean out a little old #ifdefing in cats/mysql.c
1336 kes If time diff between DIR and FD is more than 600 seconds convert
1337 INFO message to WARNING.
1338 kes Implement heap size display in status for all daemons.
1339 kes Attempt to fix MySQL db open memory loss (not successfull).
1340 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1341 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1342 Query. This looks like a MySQL but but by doing extra releases,
1343 the memory goes away. This should fix bug #847.
1345 kes When backup fails, cancel SD before waiting for sd termination.
1346 kes If SD is waiting for FD to connect during cancel, wake up the
1348 kes Fix fsf code so that errno is correctly reported.
1349 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1351 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1352 so that Bacula doesn't later stumble into a seg fault.
1353 kes Use the term Restore Client in the restore Job report.
1354 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1355 the original job's FileSetId.
1356 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1357 spooling in migration jobs. Not yet tested.
1358 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1359 reading conf file from a pipe. However, do it with open_bpipe()
1360 rather than popen. Not yet tested.
1362 kes Fix an ugly bug where the VolCatBytes were getting updated
1364 kes Implement bconsole memory command that prints current memory
1365 usage, plus smartalloc dump.
1366 kes Clarify some error messages in backup, admin, and migrate.
1367 kes Shrink label dialog to smaller size.
1368 kes Invert Cancel OK buttons on restore to be OK Cancel.
1369 kes More strerror() to bstrerror() conversions.
1371 kes Start implementing bstrerror() in place of strerror().
1372 kes Stripping path -- seems to work.
1374 kes Prevent door and port files from being restored (mostly
1376 kes Free an unreleased buffer in compat code.
1377 kes Change console Job name from *Console* to -Console- to eliminate
1378 Win32 filename problems. Put Win32 path separator when creating
1379 Console file. This fixes bug #846.
1380 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1382 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1384 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1385 to force Win32 error message.
1387 kes First cut strip path. The data should be passed to the FD,
1388 but nothing is done with it yet.
1389 kes Enhance the digest and signature routines in the crypto
1390 library to accept a JCR and to use it to print error messages
1391 so that they will go in the Job report rather than the daemon's
1393 kes Simplify some of the verify signature code.
1394 kes Simplify a few of the alternative returns in the signature
1397 ebl Use only POSIX regex instead of GNU regex in breg.c for
1398 File relocation. It fix broken freebsd compilation.
1399 kes Convert all other Dir files to use new ua class message
1401 kes Tentative fix for missing digest signature in bug 807.
1402 kes Correct handle problem in new win32_ftruncate routine.
1403 kes Convert ua_purge.c and ua_update.c to use new ua class
1404 message routines for bat.
1406 kes Correct incorrect installation of LICENSE in Win32 installer.
1407 kes Display LICENSE at the beginning of the Win32 install.
1408 kes Attempt to correct the need for the png files to be installed
1410 kes Reapply my bat.conf install script in qt-console. I think I
1411 editted bat.pro instead of bat.pro.in and it was lost.
1412 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1413 the /var/lock/subsys for subsysdir. Also corrects typos in the
1416 kes First cut update job.
1417 kes Correct configure to include qmake of src/qt-console directory.
1419 kes Make restore job yes/mod/no print in one command so GUI works.
1420 kes First cut implementing backup and restore client.
1421 kes Correct editing in Verify output that caused a seg fault.
1423 kes Insure that bat.conf is not overwritten during installation.
1424 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1425 while I was implementing migration in March 2006 !
1427 ebl Cleanup file relocation, using char *RegexWhere instead of
1428 char *where + bool where_use_regexp
1429 kes Update some manpages and add bat manpage.
1430 kes Make a first cut at converting bacula.spec.in for bwx-console
1432 kes Apply patch from John Goerzen to add hostname as fourth argument
1433 to make_catalog_backup script.
1434 kes Fix typos I introduced into bsmtp.c
1435 kes Make pm_strxxx() routines handle input of NULL pointer. This
1436 is to protect from NULL pointers returned from SQL databases.
1437 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1438 kes Add more debug to FIFO code -- fix fifo regression test.
1440 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1441 kes Add thread timer to bnet_connect() to break from OS if wait time
1444 kes Update Win32 build to include new files, new symbols, and
1446 kes Implement socket level heartbeat (tcp_keepidle)
1447 ebl Commit File relocation patch
1448 kes Make bat have 'make install' target.
1449 kes Warn during install if old gnome-console binary found.
1450 kes Warn during install if old wx-console binary found.
1451 kes Add -8 option to bsmtp command line to add content type utf-8.
1452 Fixes bug #809. (Character coding problem in bsmtp).
1453 kes If < is found in target (from, to, cc) then do not enclose the
1454 target in < > in bsmtp. Fixes bug #772 (malformed address).
1455 kes When printing certain items in dbcheck, stop after 300000.
1456 Fixes bug #822. (dbcheck loops).
1457 kes Incorrect status in Dir after waiting for mount with poll set.
1460 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1462 kes Print waiting to reserve a device every 5 mins.
1464 kes Don't call close_part in label.c if tape and relabel.
1465 kes Don't free volume if busy in close() -- should help with
1467 ebl Fix #824 RunScript bug (After script could be execute twice)
1468 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1469 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1470 Add a regression script to test RunScript
1472 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1475 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1476 deprecated. No additional bugs will be fixed, and they will be dropped
1477 in a future release (probably 2.4.0).
1478 kes Change name of wx-console to bwx-console to make it more Bacula
1480 kes Change the name of gnome-console to bgnome-console to make it
1483 kes Some time in March, a Feature Request with patch from Jorj Bauer
1484 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1486 The ability for the director to validate a Client (FD) CN against
1487 an arbitrary set of patterns rather than the hostname, with
1488 A new 'TLS Allowed CN' set of directives which are implemented
1489 in the Client resource. Then pattern matching is used in place
1490 of hostname matching against the Certificate's CN. As an example, we
1491 have certificates which (a) use a local CA, and (b) have a CN of the
1493 kes Add new/changed entry points to Win32 build
1494 kes Create unaccepted-projects for projects that are not accepted.
1495 kes Simplify locking in the reservations system.
1496 kes Add more debug code in reservations.
1497 kes Make sure error condition on reserving a volume is handled correctly.
1498 kes Correct handling of volume_in_use.
1499 kes Correct handling of initializing a device.
1500 kes Move handling of broadcasting releasing a device into release_device().
1501 kes Correct attaching dcr to dev so that it is only done if device
1502 is properly initiated.
1504 kes Locking debug level tweaks in SD.
1505 kes Tweak new Volume code.
1507 kes Add exec external-command [wait-seconds] to bconsole. This
1508 executes the external-command. Note! normally external-command
1509 should be enclosed in double quotes.
1510 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1511 it should normally be off in a production system.
1513 kes Implement die command for SD so that we can force it to dump.
1514 kes Implement SD lock debug code.
1515 kes Implement new algorithm for keeping Volume list in SD. It
1516 is now owned by the device.
1518 kes Implement new code for freeing in use volumes that should
1519 resolve if not all, some of the problems of multiple drive
1520 tape conflicts described in bug 801.
1522 kes Fix gui/bacula-web/images files in svn.
1523 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1525 ebl Fix a bug in batch mode (in string escape)
1526 kes Correct migration prune SQL typo that crept in in a
1527 recent 2.1.x change.
1529 kes Move bnet_despool() into class in bsock.c
1530 kes Modify job report to include director name and Build OS.
1531 kes Move drop root privilege and check_catalog() before fork.
1532 kes Add update database scripts (version 9 to 10) to updatedb directory.
1534 ebl Check size and age of each file after its backup to see if
1535 it has changed during backup, if 'checkfilechanges' is set.
1536 The FD will do an extra check (stat(2)) after
1537 each file backup. mtime, ctime and size are compared with
1538 'before backup' information. If time or size mismatch, an
1539 error message will be generated. You must upgrade FD to use it.
1541 kes Make database name and user configurable
1542 --with-db-name=xxx --with-db-user=xxx
1543 kes Add back database type to message.c for debugging.
1545 kes Implement dir_sql() which issues an SQL query.
1546 kes Modify bat medialist to use dir_sql() and do some minor C++
1547 formatting as well as eliminating a number of pointers, simplifing
1550 kes Fix some of the mtx-changer grep commands for tape label readers.
1551 kes Convert a number of bsendmsg into the appropriate send/warning/error
1552 message class calls.
1553 kes Suppress the using database message in the .sql command.
1554 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1556 kes Add context menu for floating a window.
1557 kes Some minor cleanup and name changes in qt-console
1558 kes Add doing mt setblk 0 in Win32 mtx-changer.
1559 kes Apply Martin's bug fix to move definition of ENODATA for
1561 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1562 sqlite2 and sqlite3.
1564 kes More pruning cleanup.
1565 kes Turn on wait_for_drive by default in mtx-changer.
1566 kes Turn on Batch insert code by default as it now passes regression.
1567 kes Add ./configure --enable-bat to enable building of Bat.
1568 No install yet though.
1570 kes Implement a new .sql command for bat.
1571 kes Implement code to turn off pruning in obtaining the next volume.
1572 Pruning is turned off for the status dir command, but turned on
1573 for SD requests and for the list nextvolume command.
1575 kes Correct Qmsg() that was not updated correctly when committing a
1576 previous change (probably the recent TLS patch).
1578 kes Write new subroutine is_volume_purged() that explicitly checks
1579 if the Volume is purged, and if so marks it as such. This should
1580 resolve problems reported about needing to mount twice to recycle
1582 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1583 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1584 amount of duplicated code.
1585 kes Do volume pruning only for the Media Type desired (reduces pruning time
1586 if multiple Media Types are in the same pool).
1587 kes Implement more detailed info in the Job report for the Bacula version
1589 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1591 ebl Add bbatch tool to bench database and insert mode.
1592 Fix sql quote stuff in batch mode
1593 Fix sql stuff for mysql
1595 kes Correct problems with am/pm scheduling. Fixes bug #808.
1596 kes Implement new prunning code that prunes up to 1000 jobs at
1597 the same time. The same technique can be applied to a number
1598 of other prune/purge subroutines.
1599 kes Add an insanity check when starting a new tape job to ensure
1600 that the tape position has not been changed. If so fail the
1602 kes Fix Win32 build for dlls to add the folllowing:
1603 src/lib/bsock.c -- new file with new entry points
1604 src/lib/dlist.c -- new entry points
1605 src/cats/sql_create.c -- new entry point
1606 src/cats/sql_cmds.c -- new DATA item exported
1608 ebl batch mode cleanup bscan-test is ok now.
1609 kes Implement SD code to check length of disk volume before appending.
1611 kes Correct return status on db_batch... routines.
1612 kes Add call to db_write_batch_file_records() to migration code.
1613 ebl Fix AfterJob timing
1614 kes Move the checking of the database in initializion of the Director
1615 to after we drop privileges. This avoids the need for both root
1616 and bacula access to the DB.
1617 kes Correct a misplaced variable definition in src/filed/backup.c
1618 kes Correct how the new batch insert db_create_attributes_record()
1619 uses the arguments. Caused a seg fault in bscan.
1620 kes Implement lock() and unlock() methods in DEVICE class.
1621 Implement block() and set_block(xx) methods in DEVICE class.
1622 kes Modify bnet_connect() so that it uses time() to check for the
1623 wait time expiring (on some OSes, some system calls may not
1624 return immediately).
1625 kes Modify Verify to obtain the previous JobId when it is actually
1626 running rather than at schedule time (as it was in 1.38.x).
1627 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1629 kes When checking pid in pid file, continue running if the pid is
1630 the same as ours. This occurs on IRIX after a system crash.
1633 kes Extend new GUI API.
1634 kes Make the ua structure a class, and implement send_msg(),
1635 error_msg(), warning_msg(), and info_msg().
1637 kes Apply fix from for building wx-console on the Mac from
1639 kes Implement new select mechanism for GUI programs.
1640 kes Reorganize initialization of stackedWidgets in bat.
1642 kes Add updated nagios plugin supplied by Christian Masopust.
1644 kes More bat implementation.
1645 kes File migrate bug with Pool Occupancy using mediaid instead
1646 of jobids. Fixes bug #795.
1647 kes Fix orphaned buffers in filed backup and verify due to
1648 crypto buffers not freed during errors. Fixes bug #789.
1649 kes Extend new GUI api code to tree commands.
1650 kes Ensure that tree and dot commands check console ACLs.
1651 kes Permit marking directory with trailing slash.
1652 kes Allow 20 console connections (instead of only 10).
1654 kes Add smartctl call to bacula-sd.conf as an example of getting
1657 kes Modify jobq.c to let simultaneous restore jobs run. This may
1658 cause them to fail if they cannot get a drive.
1659 kes Add Client Connect Wait to Storage daemon to permit users to
1660 modify the time the SD waits for a FD connection.
1662 kes Correct virtual changer check which was backwards. This caused
1663 volumes to be unloaded into slots already occupied.
1665 kes Apply Command ACL filter to JobId list in restore command.
1666 kes Correct typeo in var.c patch.
1668 kes Don't let Bacula prune File or Job records for the current Job.
1669 kes Fix variable substitution pad + inc bug reported (with patch)
1672 kes Correct SQLite log table index as reported by Luca Berra.
1674 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1676 kes Begin implementing new comm signals for API.
1677 kes Fix a few places in lib/message.c where the open fd may
1679 kes Continue implementing lib/bsock.c (real class). Make jcr,
1680 who, host, and port private. There are new methods to access
1681 them for non-class use. This required touching a number of files.
1683 kes Add LANG=C to autoconf/randpass so it works with languages other
1684 than English. Fixes bug #788.
1686 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1688 You will not be able to generate Include/Exclude list any more.
1689 It will be fixed soon.
1690 If you want to use this, you can apply
1691 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1693 kes Restore of sockets created false error messages because Bacula
1694 no longer restores sockets, but the code was still trying to
1695 set the attributes on a non-existent file. Reported by a user.
1696 ebl finish RecyclePool feature
1697 Media will takes Pool.RecyclePool
1698 when moving from Scratch to a Pool or when user will do
1699 update volume=xxx frompool
1700 To use it, add RecyclePool = aPool to your Pool resource
1703 RecyclePool = Scratch
1707 kes Expand new BSOCK class adding signal() and new BNET signals.
1708 kes Begin enhancing the dot commands adding a new API function
1709 that returns more information and will make it easier
1710 to interface to the Director from a program.
1712 kes Make DEVICE fd private. Its new name is m_fd, and can be
1713 obtained with dev->fd() outside the class. This is the
1714 first of many DEVICE members to be made private.
1715 kes Implement Michael Renner's idea on having a virtual disk
1716 changer. I made some minor modifications (e.g. I did not
1717 implement the Virtual Changer directive, but simply set
1718 the Changer Command to an empty string.
1720 kes Implement a BSOCK send() method that writes the whole record
1721 in a single write() request rather than in two.
1722 ebl add update volume=xxx recyclepool=yyyy
1723 volume takes recyclepool from pool when using update volume=xxx from pool
1725 kes Fix encryption deblocking bug, which caused some restored files
1726 to be truncated. This fixes bug #763.
1727 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1728 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1730 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1731 ebl Use btime_t instead of uint64_t in media patch.
1733 kes Optimize the use of the database a bit in the Status dir command.
1734 Only open it when needed, ensure that if any previous database
1735 was opened, it is closed.
1737 kes Correct VolCatBytes bug from media patch.
1738 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1739 in the case of orphaned records.
1740 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1741 and File records in 300K chunks to be more efficient. This
1742 idea came from Juan Luis Frances (if I remember right).
1743 kes Apply Eric's scratch patch that moves a purged Volume to
1744 the RecyclePool. Question: how is RecyclePool set? what
1745 happens to the ScratchPool?
1746 kes Apply Eric's media patch that collects read/write media
1747 times as well as byte counts. This patch requires a
1748 simultaneous upgrade of the DIR and SD. Note, there
1749 should be some way to turn off timing. I'm not sure
1750 times are in Bacula units.
1751 kes Apply Eric's batch-insert patch.
1753 kes Update projects list.
1755 kes Implement Include/Exclude file lists in FD as dlists using
1756 the new dlistString class. This permits efficiently having
1757 large include/exclude lists and completes project Item 25.
1758 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1759 console is authorized to cancel the job. This fixes bug
1761 kes Modify SD so that the VolCatJobs medium record is updated
1762 at the beginning of a Job rather than the end. This
1763 fixes bug #775 where exceeding MaxVolJobs caused jobs
1765 kes Added a mutex around getting and setting Volume information
1766 so that multiple simultaneous jobs will single thread.
1768 Switch to using Subversion
1769 kes Remove src/pygtk-console/ from configure
1771 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1772 plus the entrypoints.
1773 kes Apply patch supplied that corrects debug print
1774 in canceling jobs for max run time. Supplied as
1775 part of bug #621, which was previously fixed.
1777 kes Test on job_canceled() and sd_msg_thread_done inside
1778 loop starting the message thread to avoid a race condition.
1780 kes Remove rl_catch_signal from console.c as it conflicted
1781 with the header definition. Fixes bug #765.
1782 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1784 kes Clarify some stored/acquire messages to indicate if the
1785 problem is with read or append.
1787 kes Fix memory leak with storage ids in cats/sql_get.c
1788 kes Terminate watchdog earlier to avoid reference to released
1789 memory -- reported by Jason Austin.
1790 kes Move closing the database from jobq.c to the director daemon
1791 termination routine. This fixes memory leaks for shadow jobs
1792 (i.e. migration jobs).
1793 kes Free up the unique jobid chain items in migrate.c. This fixes
1794 a memory leak problem.
1795 kes Convert some ugly looking for statements to use foreach_alist
1796 in findlib/find.c. This will facilitate converting the structures
1797 to use dlist (for large include/exclude lists).
1798 kes Fix a bug in the btree.c and btree.h routines, then rename them
1799 rblist and add them to be built in src/lib. Include some new
1800 methods written by Rudolf Cejka that make the code more readable
1801 (hides some of the ugly casting).
1802 kes Add set_next() and set_prev() methods which make the code much more
1803 readable. Also add a new dlistString class that facilitates storing
1804 strings in dlists. To be used in the large include/exclude lists.
1805 kes Make some trivial modifications to lib/tree.h that use rblist
1806 rather than dlist for storing the tree links. This was suggested
1807 by Rudolf Cejka. The result of this is that the restore tree now
1808 uses red-black binary trees rather than simple linked lists. This
1809 should give rather dramatic speed improvements for directories
1810 contining large numbers of directories/files (more than 10000).
1812 kes Fix maxruntime bug #621.
1814 ebl Implement the include JobID in spool file name project.
1815 kes Reorder projects file in order determined by Jan 2007 vote.
1816 kes Implement item #12 on project list -- quick release of FD by
1818 kes Fix open of SQLite3 db where user does not have write permission
1819 so that DIR does not crash. Fixes bug #761.
1821 kes Add back missing @ in Win32 Makefile.
1822 kes Change 'Device not configured to autolabel' from INFO
1824 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1825 which should restart an indefinite # of times.
1826 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1827 other DIR specifications.
1829 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1830 Fix path quoting in SQLite scripts.
1831 Fix problems with SHGetFolderPath.
1833 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1835 kes Fix Job restart on error bug that promotes an Inc to a Full
1836 backup. This should fix bug #755.
1837 kes Add qt-console and first cut of code.
1841 kes Fix Bacula->Documentation link on Win32 to point to index.html
1842 instead of bacula.html. Fixed bug #750.
1843 kes Return JobId in db_get_job_record() when JobId==0. This should
1845 kes Do not release source pointers when restarting a failed job.
1847 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1848 This *should* fix bug #747.
1849 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1852 kes Modify USTORE constructor to set an empty store_source string,
1853 and don't copy the store_source string in a cancel. Hopefully
1854 this will fix Arno's seg fault, bug #744.
1855 kes Add back code to disable conio in configure. Fixes bug #743.
1856 kes Correct the Options scanner in the FD to correctly handle
1857 SHA1 option, which was eating the next option. Reported by
1859 kes Add code to indicate when the SD is spooling, spool wait, and
1860 despooling as requested by Alan Brown.
1862 Version 2.0.0 released: 4 January 2007