1 Technical notes on version 2.3
5 ebl Change default statistics target of filename.name and path.path
6 fields for PostgreSQL. This speeds lookup by indexes. Thanks
8 kes A few more tweaks to new reservation code. Make sure to clear
9 vol released flag when retaking volume. When reading label and
10 label is bad mark volume unused. When recycling, mark volume
11 unused so it can be renamed.
13 kes Fix reserve_volume() so it doesn't release a volume in use
14 (i.e. a volume entry not marked released). This should be
15 the last part needed to fix bug #1018.
17 kes Fix existing switch drive SD code to call autochanger to release
18 any old volume. This must be done to keep the autochanger from
19 releasing subsequently newly reserved volumes in doing a close().
20 This should fix bug #1018.
21 kes Fail if attempting to get console input in batch mode. This
22 should help fail RunScript console commands that are incomplete.
23 kes First cut implementing switch_drive() in SD (not actually called).
25 kes Implement first cut running console commands in a RunScript.
27 ebl Fixes bug #1028 where "Selection Type" option was not usable
29 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
32 kes Add new free_tls() entry point so that Win32 builds.
33 kes Fix compile warning in src/lib/util.c
34 kes Fix entry point for edit_job_codes() so that Win32 builds.
35 kes Fix seg fault Frank Sweetser reports in regression testing
36 on his systems. The problem was that the original author of
37 bsnprintf.c did not take into account the side effects of
38 using ++x in the argument to a #define.
39 kes Make SD protocol backward compatible with version 2.2.x.
41 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
42 because Bacula no longer restores sockets.
43 ebl Always use ignorecase fileset option on win32 FD.
45 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
46 that implements double quoting include names in conf files,
47 and also allows piping input by having the first character
48 be a vertical bar (|).
49 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
50 that implement %f in RunScripts to pass the FileSet name.
51 kes Skip leading | when lex input comes from a pipe as suggested
52 by Michael Stapelberg <michael@stapelberg.de>.
54 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
55 Nerijus Baliunas <nerijus@users.sourceforge.net>
57 kes Implement Plugin Directory and plugin events.
59 kes Implement a security enhancement: TLS authentication but no
60 encryption. Enabled by setting 'TLS Authentication = yes'.
61 Note when this is on, TLS encryption is turned OFF!
63 kes This patch corrects a problem where the maximum concurrent storage
64 jobs counter gets out of sync during restore jobs causing jobs to
65 'wait on max Storage jobs'. This patch fixes bug #1009.
67 kes This patch fixes bcopy so that it produces correct Volumes.
69 kes This patch eliminates spurious output to the console during a VerifyVolume
70 job that contains encrypted data. It fixes bug #1024.
72 kes This patch prevents the 'status dir' command from trying to use a scratch
73 volume and possibly moving it from one pool to another. This patch fixes
76 kes Add new include to postgresql.c suggested by Marc Cousins so
77 that it compiles correctly with pgre version 8.3.
79 kes Fix --archivedir addition to configure. Replace it with
80 --with-archivedir in configure.in This fixes the regression
82 kes This patch fixes bug #1012 where the job is canceled because
83 of Max Run Time exceeded when the job has not yet started.
85 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
86 one 'part' to write. Instead of each part being stored on disk,
87 written to DVD, then deleted from disk, all parts are written to disk,
88 and only the last is written and deleted from disk.
89 kes This patch fixes the status command to include the formating string for
90 JS_AttrInsterting. It fixes bug #1021.
91 kes This patch should fix the Mac OS X build problem on the latest
92 Darwin, where sys/types.h was not included correctly (apparently
93 due to a change in the Mac headers). The solution was to explicitly
94 ensure that it is defined for the ./configure.
95 This patch also has a rebuild of configure that includes the Debian
96 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
97 kes This patch should ensure that queued messages to the console are
98 displayed as soon as possible. It should fix bug 1007, but has been
101 kes This patch fixes the infinite loop when trying to increase the
102 maximum number of volumes in a Pool during the add command.
103 This patch fixes bug #1008.
105 Release Version 2.2.6
107 db Remove extra data on estimate command in joblist for bat.
109 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
110 really change anything, but is the beginning of doing it *right*.
111 To do it completely right the LastWritten date must be passed to
112 the SD, but it is not yet done.
113 kes Minor tweaks to some bat restore SQL.
114 kes This patch fixes bug #1003 where putting the message output from
115 a Verify job into the catalog results in a recursive loop. The problem
116 seems to show up only with postgresql (to be verified).
117 kes Correct %x to %p in postgresql debug statement.
119 kes Fix bug #942 where lots of emails where generated when the heartbeat
120 interval was low and Bacula wanted a different tape from the one in
123 ebl Add new SD despooling attributes and Dir inserting attributes
124 job status codes in the catalog (Status table).
126 ebl Use qmake-qt4 instead of qmake when available (debian system).
128 kes Add a security warning to src/cats/make_catalog_backup.in indicating
129 that passing the password via the command line (arg 3) is insecure.
130 This responds to bug #990 (it doesn't fix it).
132 kes Set default debug_level to zero. This corrects bugs #991 and #993.
133 kes Fix a crash in bat when it cannot connect to the Director for example
134 if the Director is not running.
135 kes Remove redundant INDEX (JobId) from File table in the trunk.
137 kes Make explicit exception to GPL in LICENSE to permit linking
138 the Win32 FD with Microsoft VSS code.
139 kes Apply the Solaris package patch from
140 Masopust, Christian <christian.masopust@siemens.com>
141 kes Apply the patch to optionally add a timestamp in the debug output
142 submitted by Mariusz Czulada <manieq@wp.eu>.
144 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
145 backend (sql_strerror). Fixes bug #989
147 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
148 It applied with no problems.
149 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
151 kes Redirect stderror to stdin on mt status command in mtx-changer.in
152 since the status is returned on stderr on Solaris.
153 kes Activate Close button on tray-monitor window. This fixes
155 kes Check for NULL item in parse_conf.c before calling it. In the
156 case of Device, there is no item and this caused a seg fault when
157 Device appears in the conf file.
158 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
159 avoids pulling in config.h multiple times in some new code.
161 kes Fix spurious warning message printed when creating a volume with
162 a LabelFormat. This fixes bug #976.
164 Release Version 2.2.5
166 kes Add JobId in place of Job name in all the Jmsg() output.
167 kes Correct the APP_DESC for the Win32 storage service (remove an e).
169 kes Make maxvol-test and new more strict maxvol2-test work.
170 kes Print JobId in all Jmsg() job output.
172 kes Add new SD despooling attributes and Dir inserting attributes
173 job status codes. This fixes bug 961.
174 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
176 kes Fix doc issue. This fixes bug #963.
177 kes Fix listing performance problems in bat. Pointed out by
179 kes Remove old debug code.
180 kes Fix bat code that tests for Win32. This should fix bug #968
181 kes Query 5 list wrong Vol after migration. This fixes bug #960
183 ebl Fix #969 where user can't change Replace option in restore menu.
185 kes Save jcr in thread specific data (tsd) for each thread.
186 kes Make Dmsg() print JobId as -%u.
187 kes Make Jmsg, Emsg, and others automatically pickup the jobid
188 for the thread if it exists.
189 kes Remove old reservation debug jid code.
190 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
191 ebl Add an option that permit to specify spool size in job
192 definition. (Applying patches/testing/spoolsize_per_job.patch).
193 You must upgrade SD and DIR at the same time.
194 dvl Add new configuration item --archivedir
195 dvl Adjust regression tests to use tmp not /tmp. This will allow
196 multiple concurrent runs of the regression tests.
198 kes Fix race condition that drops final block written to volume.
199 This happens in rare cases with multiple simultaneous jobs
200 when the Volume fills. This fixes bug #964. May be related
201 to bug #935 and possibly #903.
202 kes Eliminate more strerror() and replace with bstrerror().
203 kes Remove BSD getopt and replace with unrestricted IBM version.
204 kes Fix Win32 build for changed calling sequences.
205 kes More tweaks to the mount volume routines to get everything
206 right. Changed variable name from find to have_vol, which is
207 much easier to understand.
208 kes Enhance btimer debug code.
210 kes Fix FD->SD authorization failure, which was due to spurious
211 wakeups from a pthread_cond_timedwait(). Simply check the
212 predicate before continuing. This fixes bug #953.
213 kes Add const char where needed (more to do). Remove temp debug code.
215 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
216 kes Don't overwrite error message in check_tables_version.
218 kes Unlock batch insert tables with same calls used elsewhere.
219 kes Allow starting 59 jobs a second.
220 kes Make SD session key more random.
221 kes Add retry for SQLite opening db if it fails. Probably helps
223 kes Suppress extra error messages during batch insert failure.
225 kes Add jcr to timer packets so if killed message can be sent to job.
226 kes Add JobId to all Dmsg() output.
227 kes Put some FD auth code on dbglvl rather than fixed.
228 kes Return insert attributes error message in db msg buffer to avoid
229 false error messages. Helps fix bug #966.
230 kes Separate batch init error messages. Probably helps fix bug #966.
231 kes Make SD code that contructs attribute insert check string lengths
233 kes If Dir gets an error during inserting attributes, cancel SD.
234 This reduces unnecessary error messages.
236 kes Correct search boolean for getting Volume info
237 ebl Cleanup batch insert code. Probably fixes bug #965.
238 kes Back out one small change to the reservation system (reserving a volume).
239 kes Rework how a Volume is mounted. It is now much more intelligent and
240 will always attempt to use any mounted volume if possible and reduces
241 calls to the Director asking about volumes.
243 kes Turn off some code when batch insert not enabled.
244 kes Edit FD name in connect error messages.
245 kes Rework the reservation system to take into account that the Director
246 might give us a Volume that is different from the current one being
247 used, and to ensure that we don't exceed Maximum Volume Jobs.
248 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
249 fatal error with multiple jobs running'
250 kes Add more debug code in reservation system.
251 kes Implement maxvol-test to check bug #947.
253 kes Add code to handle tray monitor separated from Win32 FD.
254 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
256 kes Add missed return in fixing verify bug -- trunk only.
257 ebl Fix a command parser issue causing a director segfault.
258 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
260 kes Increase the max block size to 4MB fixes bug #957.
261 kes ERABT if user sets min block size > max block size. Fixes bug #956.
262 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
263 is not properly mounted (recognized) during a poll.
264 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
265 Job that has differences reports Verify OK.
266 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
268 ebl Add an option to operate on all pools with update vol parameters.
269 This complete the project 20. Patch from Nigel Stepp.
270 ebl Add history support to bconsole when using readline.
271 Using Ctrl-D to exit doesn't update .bconsole_history
272 kes Modify new volume algorithm to use max MediaId for generating next
273 volume number rather than the count of Volumes. This should essentially
274 eliminate the failure rate if some volumes were deleted. Bug #921.
275 kes Begin implemention of Optimize Job Scheduling.
276 kes Implement restore callback that Dirk and I agreed on for bat
277 restore. This fixes bug #928. Restore of backup of zero files fails.
278 kes Fix SQL Catalog logging which broke with new db_escape_string
281 Release Version 2.2.4
283 kes Fix bacula_cats.def for new db_escape_string().
284 kes Increase size of name string when FD making connection to SD.
285 May fix bug #953. FD->SD connection failure.
287 kes Add code to help Dan debug 2drive-incremental-2disk test.
288 kes Add code to try to fix bug #908.
289 kes Add waits to multiple exit detection code to try to force pid
290 file to always be deleted.
291 kes Restore good dev.tar.gz to rescue set appropriate binary property.
293 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
294 trying to switch drives by checking for blocking before unblocking.
296 kes Cancel storage daemon in all cases where FD reports error. This
297 should fix virtually all cases of bug #920.
298 kes Fix db_escape_string() for MySQL which did not compile.
300 kes Fix error message that was clobbered when Dir tells SD it does not
301 have write permission on Volume. This should fix a minor point
302 in bug #942, but not the main problem.
303 kes Add code to cancel job in SD if FD connection fails. This should
305 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
306 dvl Pass jcr and db into db_escape_string() to enable better escaping
308 kes Fix migration code to get correct Volume name with multiple volumes
309 by skipping |. Fixes bug #936.
310 kes Implement patch supplied by Landon to fix bug #944 where using
311 TLS with bconsole uses 99+% of the CPU.
312 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
314 kes Move patches into patches directory.
316 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
319 ebl Using 'm' in bconsole will show messages like before,
320 and not memory usage.
321 kes Fix bug #935, and probably also bug #903 where files were not
322 restored. MediaId was not properly set in JobMedia record after
325 kes Suppress chown and chmod error messages if the FD is not running
328 kes Apply Martin Simmons' patch that should turn off the new API usage
329 when batch insert is turned off allowing building on older
331 kes Add ./configure search in qwt-qt4 for qwt package
333 kes Bacula is now free of 3rd party GPL copyrighted code!
335 kes Add guid_to_name.c/h which replace idcache.
336 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
338 ebl Detect if new PosgreSQL batch insert API is present.
339 kes Correct incorrect mempool call causing Director crash. Occurs on
340 systems without va_copy().
341 sb Update spec files for 2.2.1 release
343 kes Fix memory pool call in ua_output.c. bug #934.
344 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
345 Add test program to fnmatch.c
347 kes Integrate patch to README.vc8 from
348 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
349 edit it to get it into Unix patch format.
350 kes Implement mkpath.c to replace old FSF makepath.c
352 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
354 Release Version 2.2.1
356 kes Update POTFILES.in
357 kes Cleanup a few underquoted AC_DEFUNs in configure
358 kes Apply patch from Martin Simmons that adds a test for va_copy to
361 kes Fix bug #921 by increasing the number of tries to create a new volume
363 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
364 can be called multiple times. Implement a version for machines
365 without va_copy() that gets a big buffer.
367 kes Integrate more portable zone offset code into bsmtp.c
368 Submitted by Attila Fülöp.
370 kes Fix bad SD->FD return status reported by
371 (James Harper) <james.harper@bendigoit.com.au>
372 ebl Fix a bug in read_close_session which return random status
373 thanks to James Harper
375 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
376 and directory names during restore of single file/directories.
377 kes Add sanity checks to .sql command when string is empty. Hopefully
378 that will resolve Dirks Director crash.
380 kes Apply patch submitted by Martin Simmons that corrects a seg fault
381 in the bsmtp chat subroutine when debug is >= 10.
383 kes Fix Director crash when running bat SQL queries.
384 kes Add David's notes on Item 8: Copy pools.
386 kes Rework projects file to be current and ready for a vote.
387 kes Enhance lex scanner error message.
389 kes Tweak LICENSE file to mention BSD code.
390 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
391 if specified on the ./configure.
392 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
393 This class is intended to allow us to open a second bsock to the
394 Director while in the restore subdialog.
396 kes Fix configure to create bat Makefile before creating dependencies.
397 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
398 kes Add a tooltip to the tray monitor.
399 dvl Set the Director's PID file before dropping privs. This fixes
402 kes Update AUTHORs file
403 kes Increase the default max concurrent jobs to 20 in FD and SD to
404 correspond with the default .conf files.
405 kes Rewrite the Win32 service routines. This eliminates the 3 copies
406 some different, of the same file created by RN when porting the
408 kes Rearrange some of the Win32 directories and the placement of the files
410 kes Set DEVELOPER flag in version.h
412 ========================================================================
413 Release Version 2.2.0
415 kes Apply a second doc patch from Marc.
416 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
417 improves the tips section that discusses how to setup multiple
420 kes Update bat README file.
421 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
422 corrects a typo in the Recycle status check in db_find_next_volume().
423 This will probably fix a number of annoying problems with multiple
425 kes Modify most of dird/msgchan.c to use bsock class calls rather than
426 bnet calls -- no functionality change.
428 kes Modify the Verify output to specify if files are missing on
429 the Volume(s) or disk. Fixes confusion in bug #916.
430 kes When more than one Volume is read in a migration job, the last
431 Volume bytes reported are from the last read volume rather than
432 the last written volume. Fixed. This fixes bug #910.
433 kes Fix display of Recycle flag after update volume=foo recycle=yes.
434 It previously printed New Recyle flag is: no. This fixes bug
437 kes Correct seg fault when switching tape drives during restore.
438 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
439 be used until after 2.2.0 release.
441 kes Remove fnmatch() in SD that permitted wild card specifications.
444 kes Fix %g in filename returned by SQL for browse tree reported by
446 kes Fix configure so that it puts config.out in the cwd rather than
448 kes Attempt to fix the locking problem reported by Eric in bug #906.
449 kes Make berrno class to leave errno unchanged after constructor call.
450 kes Make bnet_server use the heap rather than the stack to allocate
451 its socket fd pointers to avoid a crash at termination. Problem
452 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
454 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
455 and putting it in depkgs-qt along with Qt4.3.
457 kes Rework code in acquire.c that switches drives for reading when
458 the Media Type does not match. This should fix bug #906
460 ebl Fix a director segfault during job setup #907
461 kes Correct seg fault in postgresql when first operation returns no
462 rows. Fixes Dirks File browser problem seg fault with bat.
464 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
465 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
468 kes Implement PopUp YES/NO dialog for bat.
470 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
472 kes Correct RunScript to terminate job in FD on failure.
473 kes Change abort_on_error and AbortJobOnError to fail_on_error
474 and FailJobOnError in RunScripts.
475 kes Minor tweaks of code formating in RunScripts, principally to
476 avoid depassing 80 columns.
478 kes Eliminate one #ifdef Win32 in bsmtp
479 kes Implement grow tool to grow a file for testing very large databases.
480 kes Add big-vol-test to test Bacula seeking with > 5GB.
483 kes Modify find_next_volume() to return all values in Media record.
484 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
488 kes Update Release notes
490 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
491 Warning, in previous beta version, all media get from scratch keep their
494 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
495 This should fix bug #842. Made a note to look at removing the temp
496 files at the end of the install.
497 kes Add ability to mount and unmount a file device providing it is
498 marked as being removable and has the appropriate mount and unmount
499 commands defined in the Device resource. This fixes bug #830.
500 kes When applying a storage override, release all previous storage
501 definitions rather than just prepending the new storage.
502 This should prevent a good deal of confusion.
504 kes Implement ./configure search for qwt libraries.
506 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
507 Win32 FD. This should fix bug #893.
508 kes Remove an unnecessary beep in Win32 init code.
509 kes Update copyright dates in Win32 executable about boxes.
510 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
511 code with a BSD getopt.c and getopt.h.
512 kes Remove sched.h from the Win32 compat directory -- not used.
513 kes Remove the Exit menu item from the Win32 tray monitor. If you really
514 need to shut it down, do it through the services panel or the command
516 kes Remove some inappropriate Bacula FSFE copyrights.
517 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
518 kes Fix regress config non-portable test as pointed out by
519 Florian Heigl <florian.heigl@gmail.com>
520 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
521 as pointed out by Florian Heigl <florian.heigl@gmail.com>
523 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
524 Reported by Frank Sweetser.
528 kes Fix client-only build.
529 kes Integrate client-only fixes for bsys (initgroups) and conio from
530 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
531 kes Make arguments to get_scratch_volume() in same order as other
533 kes Rework the prune_volumes() subroutine so that after purging and
534 no volume found in desired pool, it will check for a scratch
535 volume. This prevents recycling the whole scratch pool.
536 kes Add code to status storage to print boffset_t (largefile support).
538 kes Move qwt (Graphics libarary for Qt4) to depkgs.
539 kes You now need a --with-qwt=<dir> to be able to build bat.
540 kes Update src/win32/cats/bacula_cats.def to include the new
541 db_get_query_dbids() call on Win32.
543 kes Correct a problem when selecting a scratch volume and moving
544 it to another pool that lost some columns.
545 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
546 kes Enhance Autochanger error messages to include Volume and device name.
547 kes Rework prune_volumes() code to take account of InChanger flag,
548 and to handle recycling volumes going to the Scratch pool and
549 current pool because the RecyclePool directive.
550 kes Implement a better and more efficient db_get_query_dbids() to
551 handle creating and passing back a list of DBIds.
555 kes Start work on new more efficient DBId subroutine. First use
556 will be for recycling volume to Scratch inchanger.
557 kes Increase number of JobIds in pruning from 1000 to 10000.
558 This to be replaced by above routine.
559 kes Begin implementation of building Qt4 on Win32.
560 kes Correct typo in fix I added for bad TLS shutdown.
561 kes Pull 2.0.3 patches into patches directory.
562 kes Update Release notes. Include qt-console in line count.
563 kes Update Projects file.
565 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
566 bug in migration code where a job that spanned two volumes
569 kes Implement new BST_DESPOOLING blocked state. Change from locking
570 during despooling in SD to blocking. This means that other threads
571 can work with the device structure, in particular the reservations
572 system while despooling.
574 kes Fix return in reservation message queue that missed clearing
575 the jcr lock (implemented 26Jun07 below).
576 kes Rename a number of dev methods to make locking function names
578 kes Document locking in lock.c. Move lock structures to new file
581 kes Move reservations message lock to lock jcr only this
583 kes Move main SD locking code into lock.c (new file).
584 kes Update Win32 build to include lock.c
588 kes Dirk committed the qwt library code for drawing graphs in bat.
589 kes Tweak install of qwt so that it is integrated with ./configure.
591 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
592 out by Eric (my typo).
593 ebl Fix configure.in to get batch mode enable
594 kes Return correct string from authenticate.cpp in bat when connecting
596 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
597 spurious line drops when using TLS.
598 kes Do not file reparse points when restoring a file that already
601 kes Implement Windows reparse points -- similar to directories, but
602 we do not descend into it. This is a first cut. They seem to
603 be backed up, but restore is not yet tested.
604 kes Remove restore_blocking in tls code when shutting a socket to leave
605 it in blocking mode. Hopefully this will fix the encryption bug
606 reported by Frank Sweetser.
607 kes When opening a file for backup, tell the OS that we are going to
608 read it sequentially -- optimization.
609 kes Change variable names in authenticate_director() to not conflict
610 with member names in bat. Caused great confusion with compiler,
613 kes Queue openssl error messages in case of comm problem.
614 kes Do shutdown() call if socket terminated.
615 kes Remove some duplicated code in tls.c
616 kes Move more of the bsock member variables into private and access
618 kes Add Frank Sweetser's tls-test to the regression suite.
620 kes Add Swedish sv.po file
622 kes Don't print clock skew message in FD if less than 3 seconds diff.
623 kes Add a bit of VSS info to status client.
624 kes Implement a first cut of Vista VSS, using Win2003 code.
628 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
629 loaded tape but uses first drive).
630 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
631 This was indeed a Win32 issue.
633 kes Simplify search of autochanger for in-use Volume.
634 kes Fix exit condition of check for in-use volume. kes Remove
635 inappropriate my_postgresql_free_result() in db_close()
637 kes Fix bad return in FD when encryption signature not found.
638 Probably caused a crash.
639 kes Inhibit missing encryption signature error messages for
640 file types where no signature computed.
641 kes Correct inverted check on autochanger in reservation system.
642 kes Tweak debug code in autochanger reservation.
644 kes Add some additional locking in the cats directory in subroutines
645 that modify packet variables called from batch insert.
646 kes Rework how dcrs are allocated. new_dcr() can now be called
647 with an existing pointer, and it will simply clean it up.
648 This allows the reservation system to test various different
649 devices, and will permit easy device changes.
650 kes A bunch of changes all over to handle new new_dcr() calling
652 kes Work more on the Volume management in the SD. Remember Volumes
653 for tape drives and for autochangers (even virtual disk changers).
654 kes When looking at the Volume list to reserve a drive, handle
655 autochanger names correctly by interating through the changer
656 devices. Also call the Director to see if a Volume is suitable
658 kes Fix some bugs in bscan. Make sure all media records are written.
659 Make sure that valid JobMedia records are written for disk files.
660 Previously they were completely wrong.
661 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
662 that the URLs don't change and so that the developers will all
663 work off the same copy. Rebuild from scrach.
664 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
668 kes Fix seg fault in FD from incorrect digest size.
669 kes Fix argument to non-OpenSSL crypto.c subroutine.
673 kes Remove a few malloc()s from the encryption code.
674 kes Use the class calls to bsock in filed/backup.c and restore.c in
675 place of the old bnet_xxx code.
676 kes Implement code that does an on the fly calculation of the
677 signing digest during restore of encrypted files. It makes
678 a best guess at the algorithm, and if it is not correct, will
679 then revert to the old code which reads the file after it is
681 kes Implement at least one missing crypto stream in stream_to_ascii()
682 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
683 #877 where a reload with bad syntax causes Dir to exit.
685 Cut: 2.1.14 beta (not released)
687 kes Do not free a volume on a tape drive until another volume is
688 mounted and read, or the autochanger unloads the volume.
689 This should help the SD re-use volumes that are already mounted,
690 and should fix bug #886.
691 kes Apply patch from user brettedgar that allows gnome2-console include
692 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
693 kes Apply patch from Lucien Weller that fixes day of week calculation
694 because of DST flag problem. Fixes bug #887.
696 kes Move find_next_appendable_volume() to after acquiring a valid device
697 in reserve.c. This fixes bug #864 -- confirmed by reporter.
699 kes Unable to reproduce bug 872. However added additional testing for
701 kes Bug #874 resolved by documenting SQLite limitations.
702 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
703 kes Bug #881 resolved by removing typo in mtx-changer script.
704 kes Made Frank Sweetser's wiki the official Bacula wiki with his
705 approval. Added a link to the wiki on the web page, and implemented
706 a backup from http://paramount.ind.wpi.edu
708 kes Fix update allfrompool to pass pool name.
710 kes Convert to pure GPL v2 license.
711 kes Fix sscanf problems reported by Peter Buschman that caused
712 a bus error on Solaris.
713 kes Rework (simplify) the select prompt in bat.
714 kes Move get_jobid_from_tid() into lib and create a
716 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
717 should definitely fix the problem of lost error messages in the
719 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
720 kes Eliminate tcpd.h from the project. Enclose the #include from the
721 library with extern C ...
722 kes Add print of signal name when a signal is trapped.
726 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
728 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
729 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
730 makes SQLit3 run 30 times faster, though a bit less safe.
731 kes Implement --with-batch-insert in configure and detection of thread
732 safe libraries. It is on by default, but turned off if no thread
733 safe library (e.g. SQLite 2) is available.
735 kes Fix Bacula PostgreSQL buffer overruns.
736 kes Do better checking for NULL results returned from PostgreSQL;
737 implement retry for failed queries; clear results buffer after
738 failed query. Hopefully this will correct the PostgreSQL failures.
740 kes Implement algorithm to handle only one appendable volume with
741 Prefer Mounted Volumes = no.
742 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
743 returned from a query.
744 kes Make volume lock recursive.
745 kes Implement an additional volume reservation algorithm that
746 starts by considering all reserved volumes then uses the
747 old brute force algorithm of searching the resources to
748 find a suitable device.
749 kes Add new reservations debug code and refine the old code.
750 kes Update the win32/dll/bacula.defs file.
752 kes Tweak reservations algorithm to permit a few more cases, i.e.
753 volume reserved, but on different drive, ...
754 kes Enhance SD status to include Pool and Media Type for drive in a
755 more readable format (a bit longer).
756 kes Fix PostgreSQL double free.
758 kes Minor refactoring of restore decryption code.
759 kes Add code to smartall.c to detect double free of a buffer.
761 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
762 so that bsmtp will create a correct email address (mailbox only).
763 kes Modify 'memory' command so that the buffers are listed as 'In use'
764 to avoid confusion with Orphaned buffers.
765 kes I reworked the OpenSSL include/lib flags to be handled in
766 the standard Bacula way, which should fix bug #863 concerning
767 non-standard OpenSSL libraries.
769 kes Implement Help Browser window for bat.
770 kes Fix reload bug that reset StorageId to zero.
772 kes Fix TLS #ifdefing when TLS turned off.
773 kes Ensure that when labelling a tape with Slot=0 that InChanger
775 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
777 kes Add StartTime to final uar_sel_jobid_temp query so that we can
778 add DISTINCT (required by PostgreSQL).
779 kes Implement BSOCK authenticate_director() method. Eventually will
780 authenicate all daemons.
781 kes Move several more functions into the BSOCK class.
783 kes Add code to tell the OS that we no longer need a cached
784 file that we were reading. In findlib/bfile.c. Also,
785 only cache files that we are reading. Thanks to
786 Tobias Oetiker <tobi@oetiker.ch> for the idea.
787 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
788 kes Implement script to automatically generate cats and dll .def
790 kes Update README.mingw32 to include new .def file generation.
791 kes Correct typo in UTF-8 error message as reported by:
792 jhernandez <julianhernandez@gmail.com>
793 kes Add additional sm_check() code on debug level 1.
794 kes Set default debug level to 1.
795 kes Trap SIGABRT in attempt to get traceback.
797 kes Reduce bat connect timeout from 30 to 15 seconds.
798 kes More restructuring and implementing BSOCK class in place of
800 kes Remove a few unnecessary malloc() tests in crypto code.
801 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
802 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
803 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
805 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
807 kes Fix Verify InitCatalog. The attributes were not pointing to the
808 correct saved location.
809 kes Implement message callback so that GUI is sure to get all
810 daemon messages. Currently displayed in a dialog in bat.
811 kes Ignore SIGUSR2 (Bacula timer) in bat.
812 kes Apply regress patch from bug #859 to allow regress to work
813 with Solaris compiler.
815 kes Begin adding TLS support to bat.
816 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
817 clean up lex.c and make it more readable.
819 kes Move more bnet functions into the BSOCK class.
820 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
821 kes Complete change of berrno strerror() method to bstrerror()
825 kes Cleanup incorrect email addresses in bsmtp.
826 kes Make bat display initial messages rather than discard them.
828 kes First cut of adding .mod to the run command.
829 kes Implement auto display of messages in bat.
830 kes Enhanced preferences to allow all Bacula output to be
833 kes Try to make bsmtp date routines more generic.
834 kes Fixed bug #856 autochanger documentation.
835 kes Rework bsmtp date editing for Win32. This fixes bug #854.
836 kes Add new cats entry point so Win32 builds.
838 kes Attempt to fix bsmtp date editing on OSes without %z editing.
840 kes Do better checking for the MySQL 64 bit libraries looking for both
841 .a and .so libraries.
842 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
843 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
844 kes Require the thread safe version of MySQL during configure. Thanks
845 to Andre Noll for pointing this out.
846 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
847 continuing in migration code.
848 kes Apply implementation of tray-monitor font derived from gnome-console
849 submitted by Andreas Piesk <a.piesk@gmx.net>
851 kes Eliminate important memory loss in SQLite
852 kes Fixed the batch insert MySQL thread specific data that was not
853 being freed. See cats/mysql.c:db_thread_cleanup().
854 kes Fix restore before command.
855 kes Convert old hdr.name to name() in a few places.
856 kes Implement update jobid command.
857 kes Return all time_t dates in db_get_job_record()
858 kes Stop watchdog in SD earlier.
859 kes Put Pool just after Storage in please mount message.
860 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
863 kes Update the po files.
864 kes Fix Verify InitCatalog by making it cache attributes.
866 kes Change name bacula-bat to bat for man 1 page to correspond to
868 kes Check for client and store NULL pointers in status command. This
870 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
871 kes Fix sign extended editing of %p.
872 kes Clean out a little old #ifdefing in cats/mysql.c
874 kes If time diff between DIR and FD is more than 600 seconds convert
875 INFO message to WARNING.
876 kes Implement heap size display in status for all daemons.
877 kes Attempt to fix MySQL db open memory loss (not successfull).
878 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
879 kes Eliminate memory loss in MySQL (possibly other SQLs) during
880 Query. This looks like a MySQL but but by doing extra releases,
881 the memory goes away. This should fix bug #847.
883 kes When backup fails, cancel SD before waiting for sd termination.
884 kes If SD is waiting for FD to connect during cancel, wake up the
886 kes Fix fsf code so that errno is correctly reported.
887 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
889 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
890 so that Bacula doesn't later stumble into a seg fault.
891 kes Use the term Restore Client in the restore Job report.
892 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
893 the original job's FileSetId.
894 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
895 spooling in migration jobs. Not yet tested.
896 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
897 reading conf file from a pipe. However, do it with open_bpipe()
898 rather than popen. Not yet tested.
900 kes Fix an ugly bug where the VolCatBytes were getting updated
902 kes Implement bconsole memory command that prints current memory
903 usage, plus smartalloc dump.
904 kes Clarify some error messages in backup, admin, and migrate.
905 kes Shrink label dialog to smaller size.
906 kes Invert Cancel OK buttons on restore to be OK Cancel.
907 kes More strerror() to bstrerror() conversions.
909 kes Start implementing bstrerror() in place of strerror().
910 kes Stripping path -- seems to work.
912 kes Prevent door and port files from being restored (mostly
914 kes Free an unreleased buffer in compat code.
915 kes Change console Job name from *Console* to -Console- to eliminate
916 Win32 filename problems. Put Win32 path separator when creating
917 Console file. This fixes bug #846.
918 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
920 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
922 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
923 to force Win32 error message.
925 kes First cut strip path. The data should be passed to the FD,
926 but nothing is done with it yet.
927 kes Enhance the digest and signature routines in the crypto
928 library to accept a JCR and to use it to print error messages
929 so that they will go in the Job report rather than the daemon's
931 kes Simplify some of the verify signature code.
932 kes Simplify a few of the alternative returns in the signature
935 ebl Use only POSIX regex instead of GNU regex in breg.c for
936 File relocation. It fix broken freebsd compilation.
937 kes Convert all other Dir files to use new ua class message
939 kes Tentative fix for missing digest signature in bug 807.
940 kes Correct handle problem in new win32_ftruncate routine.
941 kes Convert ua_purge.c and ua_update.c to use new ua class
942 message routines for bat.
944 kes Correct incorrect installation of LICENSE in Win32 installer.
945 kes Display LICENSE at the beginning of the Win32 install.
946 kes Attempt to correct the need for the png files to be installed
948 kes Reapply my bat.conf install script in qt-console. I think I
949 editted bat.pro instead of bat.pro.in and it was lost.
950 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
951 the /var/lock/subsys for subsysdir. Also corrects typos in the
954 kes First cut update job.
955 kes Correct configure to include qmake of src/qt-console directory.
957 kes Make restore job yes/mod/no print in one command so GUI works.
958 kes First cut implementing backup and restore client.
959 kes Correct editing in Verify output that caused a seg fault.
961 kes Insure that bat.conf is not overwritten during installation.
962 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
963 while I was implementing migration in March 2006 !
965 ebl Cleanup file relocation, using char *RegexWhere instead of
966 char *where + bool where_use_regexp
967 kes Update some manpages and add bat manpage.
968 kes Make a first cut at converting bacula.spec.in for bwx-console
970 kes Apply patch from John Goerzen to add hostname as fourth argument
971 to make_catalog_backup script.
972 kes Fix typos I introduced into bsmtp.c
973 kes Make pm_strxxx() routines handle input of NULL pointer. This
974 is to protect from NULL pointers returned from SQL databases.
975 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
976 kes Add more debug to FIFO code -- fix fifo regression test.
978 kes Implement posix_fadvise in FD, and for reading spool files in SD.
979 kes Add thread timer to bnet_connect() to break from OS if wait time
982 kes Update Win32 build to include new files, new symbols, and
984 kes Implement socket level heartbeat (tcp_keepidle)
985 ebl Commit File relocation patch
986 kes Make bat have 'make install' target.
987 kes Warn during install if old gnome-console binary found.
988 kes Warn during install if old wx-console binary found.
989 kes Add -8 option to bsmtp command line to add content type utf-8.
990 Fixes bug #809. (Character coding problem in bsmtp).
991 kes If < is found in target (from, to, cc) then do not enclose the
992 target in < > in bsmtp. Fixes bug #772 (malformed address).
993 kes When printing certain items in dbcheck, stop after 300000.
994 Fixes bug #822. (dbcheck loops).
995 kes Incorrect status in Dir after waiting for mount with poll set.
998 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1000 kes Print waiting to reserve a device every 5 mins.
1002 kes Don't call close_part in label.c if tape and relabel.
1003 kes Don't free volume if busy in close() -- should help with
1005 ebl Fix #824 RunScript bug (After script could be execute twice)
1006 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1007 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1008 Add a regression script to test RunScript
1010 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1013 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1014 deprecated. No additional bugs will be fixed, and they will be dropped
1015 in a future release (probably 2.4.0).
1016 kes Change name of wx-console to bwx-console to make it more Bacula
1018 kes Change the name of gnome-console to bgnome-console to make it
1021 kes Some time in March, a Feature Request with patch from Jorj Bauer
1022 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1024 The ability for the director to validate a Client (FD) CN against
1025 an arbitrary set of patterns rather than the hostname, with
1026 A new 'TLS Allowed CN' set of directives which are implemented
1027 in the Client resource. Then pattern matching is used in place
1028 of hostname matching against the Certificate's CN. As an example, we
1029 have certificates which (a) use a local CA, and (b) have a CN of the
1031 kes Add new/changed entry points to Win32 build
1032 kes Create unaccepted-projects for projects that are not accepted.
1033 kes Simplify locking in the reservations system.
1034 kes Add more debug code in reservations.
1035 kes Make sure error condition on reserving a volume is handled correctly.
1036 kes Correct handling of volume_in_use.
1037 kes Correct handling of initializing a device.
1038 kes Move handling of broadcasting releasing a device into release_device().
1039 kes Correct attaching dcr to dev so that it is only done if device
1040 is properly initiated.
1042 kes Locking debug level tweaks in SD.
1043 kes Tweak new Volume code.
1045 kes Add exec external-command [wait-seconds] to bconsole. This
1046 executes the external-command. Note! normally external-command
1047 should be enclosed in double quotes.
1048 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1049 it should normally be off in a production system.
1051 kes Implement die command for SD so that we can force it to dump.
1052 kes Implement SD lock debug code.
1053 kes Implement new algorithm for keeping Volume list in SD. It
1054 is now owned by the device.
1056 kes Implement new code for freeing in use volumes that should
1057 resolve if not all, some of the problems of multiple drive
1058 tape conflicts described in bug 801.
1060 kes Fix gui/bacula-web/images files in svn.
1061 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1063 ebl Fix a bug in batch mode (in string escape)
1064 kes Correct migration prune SQL typo that crept in in a
1065 recent 2.1.x change.
1067 kes Move bnet_despool() into class in bsock.c
1068 kes Modify job report to include director name and Build OS.
1069 kes Move drop root privilege and check_catalog() before fork.
1070 kes Add update database scripts (version 9 to 10) to updatedb directory.
1072 ebl Check size and age of each file after its backup to see if
1073 it has changed during backup, if 'checkfilechanges' is set.
1074 The FD will do an extra check (stat(2)) after
1075 each file backup. mtime, ctime and size are compared with
1076 'before backup' information. If time or size mismatch, an
1077 error message will be generated. You must upgrade FD to use it.
1079 kes Make database name and user configurable
1080 --with-db-name=xxx --with-db-user=xxx
1081 kes Add back database type to message.c for debugging.
1083 kes Implement dir_sql() which issues an SQL query.
1084 kes Modify bat medialist to use dir_sql() and do some minor C++
1085 formatting as well as eliminating a number of pointers, simplifing
1088 kes Fix some of the mtx-changer grep commands for tape label readers.
1089 kes Convert a number of bsendmsg into the appropriate send/warning/error
1090 message class calls.
1091 kes Suppress the using database message in the .sql command.
1092 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1094 kes Add context menu for floating a window.
1095 kes Some minor cleanup and name changes in qt-console
1096 kes Add doing mt setblk 0 in Win32 mtx-changer.
1097 kes Apply Martin's bug fix to move definition of ENODATA for
1099 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1100 sqlite2 and sqlite3.
1102 kes More pruning cleanup.
1103 kes Turn on wait_for_drive by default in mtx-changer.
1104 kes Turn on Batch insert code by default as it now passes regression.
1105 kes Add ./configure --enable-bat to enable building of Bat.
1106 No install yet though.
1108 kes Implement a new .sql command for bat.
1109 kes Implement code to turn off pruning in obtaining the next volume.
1110 Pruning is turned off for the status dir command, but turned on
1111 for SD requests and for the list nextvolume command.
1113 kes Correct Qmsg() that was not updated correctly when committing a
1114 previous change (probably the recent TLS patch).
1116 kes Write new subroutine is_volume_purged() that explicitly checks
1117 if the Volume is purged, and if so marks it as such. This should
1118 resolve problems reported about needing to mount twice to recycle
1120 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1121 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1122 amount of duplicated code.
1123 kes Do volume pruning only for the Media Type desired (reduces pruning time
1124 if multiple Media Types are in the same pool).
1125 kes Implement more detailed info in the Job report for the Bacula version
1127 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1129 ebl Add bbatch tool to bench database and insert mode.
1130 Fix sql quote stuff in batch mode
1131 Fix sql stuff for mysql
1133 kes Correct problems with am/pm scheduling. Fixes bug #808.
1134 kes Implement new prunning code that prunes up to 1000 jobs at
1135 the same time. The same technique can be applied to a number
1136 of other prune/purge subroutines.
1137 kes Add an insanity check when starting a new tape job to ensure
1138 that the tape position has not been changed. If so fail the
1140 kes Fix Win32 build for dlls to add the folllowing:
1141 src/lib/bsock.c -- new file with new entry points
1142 src/lib/dlist.c -- new entry points
1143 src/cats/sql_create.c -- new entry point
1144 src/cats/sql_cmds.c -- new DATA item exported
1146 ebl batch mode cleanup bscan-test is ok now.
1147 kes Implement SD code to check length of disk volume before appending.
1149 kes Correct return status on db_batch... routines.
1150 kes Add call to db_write_batch_file_records() to migration code.
1151 ebl Fix AfterJob timing
1152 kes Move the checking of the database in initializion of the Director
1153 to after we drop privileges. This avoids the need for both root
1154 and bacula access to the DB.
1155 kes Correct a misplaced variable definition in src/filed/backup.c
1156 kes Correct how the new batch insert db_create_attributes_record()
1157 uses the arguments. Caused a seg fault in bscan.
1158 kes Implement lock() and unlock() methods in DEVICE class.
1159 Implement block() and set_block(xx) methods in DEVICE class.
1160 kes Modify bnet_connect() so that it uses time() to check for the
1161 wait time expiring (on some OSes, some system calls may not
1162 return immediately).
1163 kes Modify Verify to obtain the previous JobId when it is actually
1164 running rather than at schedule time (as it was in 1.38.x).
1165 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1167 kes When checking pid in pid file, continue running if the pid is
1168 the same as ours. This occurs on IRIX after a system crash.
1171 kes Extend new GUI API.
1172 kes Make the ua structure a class, and implement send_msg(),
1173 error_msg(), warning_msg(), and info_msg().
1175 kes Apply fix from for building wx-console on the Mac from
1177 kes Implement new select mechanism for GUI programs.
1178 kes Reorganize initialization of stackedWidgets in bat.
1180 kes Add updated nagios plugin supplied by Christian Masopust.
1182 kes More bat implementation.
1183 kes File migrate bug with Pool Occupancy using mediaid instead
1184 of jobids. Fixes bug #795.
1185 kes Fix orphaned buffers in filed backup and verify due to
1186 crypto buffers not freed during errors. Fixes bug #789.
1187 kes Extend new GUI api code to tree commands.
1188 kes Ensure that tree and dot commands check console ACLs.
1189 kes Permit marking directory with trailing slash.
1190 kes Allow 20 console connections (instead of only 10).
1192 kes Add smartctl call to bacula-sd.conf as an example of getting
1195 kes Modify jobq.c to let simultaneous restore jobs run. This may
1196 cause them to fail if they cannot get a drive.
1197 kes Add Client Connect Wait to Storage daemon to permit users to
1198 modify the time the SD waits for a FD connection.
1200 kes Correct virtual changer check which was backwards. This caused
1201 volumes to be unloaded into slots already occupied.
1203 kes Apply Command ACL filter to JobId list in restore command.
1204 kes Correct typeo in var.c patch.
1206 kes Don't let Bacula prune File or Job records for the current Job.
1207 kes Fix variable substitution pad + inc bug reported (with patch)
1210 kes Correct SQLite log table index as reported by Luca Berra.
1212 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1214 kes Begin implementing new comm signals for API.
1215 kes Fix a few places in lib/message.c where the open fd may
1217 kes Continue implementing lib/bsock.c (real class). Make jcr,
1218 who, host, and port private. There are new methods to access
1219 them for non-class use. This required touching a number of files.
1221 kes Add LANG=C to autoconf/randpass so it works with languages other
1222 than English. Fixes bug #788.
1224 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1226 You will not be able to generate Include/Exclude list any more.
1227 It will be fixed soon.
1228 If you want to use this, you can apply
1229 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1231 kes Restore of sockets created false error messages because Bacula
1232 no longer restores sockets, but the code was still trying to
1233 set the attributes on a non-existent file. Reported by a user.
1234 ebl finish RecyclePool feature
1235 Media will takes Pool.RecyclePool
1236 when moving from Scratch to a Pool or when user will do
1237 update volume=xxx frompool
1238 To use it, add RecyclePool = aPool to your Pool resource
1241 RecyclePool = Scratch
1245 kes Expand new BSOCK class adding signal() and new BNET signals.
1246 kes Begin enhancing the dot commands adding a new API function
1247 that returns more information and will make it easier
1248 to interface to the Director from a program.
1250 kes Make DEVICE fd private. Its new name is m_fd, and can be
1251 obtained with dev->fd() outside the class. This is the
1252 first of many DEVICE members to be made private.
1253 kes Implement Michael Renner's idea on having a virtual disk
1254 changer. I made some minor modifications (e.g. I did not
1255 implement the Virtual Changer directive, but simply set
1256 the Changer Command to an empty string.
1258 kes Implement a BSOCK send() method that writes the whole record
1259 in a single write() request rather than in two.
1260 ebl add update volume=xxx recyclepool=yyyy
1261 volume takes recyclepool from pool when using update volume=xxx from pool
1263 kes Fix encryption deblocking bug, which caused some restored files
1264 to be truncated. This fixes bug #763.
1265 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1266 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1268 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1269 ebl Use btime_t instead of uint64_t in media patch.
1271 kes Optimize the use of the database a bit in the Status dir command.
1272 Only open it when needed, ensure that if any previous database
1273 was opened, it is closed.
1275 kes Correct VolCatBytes bug from media patch.
1276 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1277 in the case of orphaned records.
1278 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1279 and File records in 300K chunks to be more efficient. This
1280 idea came from Juan Luis Frances (if I remember right).
1281 kes Apply Eric's scratch patch that moves a purged Volume to
1282 the RecyclePool. Question: how is RecyclePool set? what
1283 happens to the ScratchPool?
1284 kes Apply Eric's media patch that collects read/write media
1285 times as well as byte counts. This patch requires a
1286 simultaneous upgrade of the DIR and SD. Note, there
1287 should be some way to turn off timing. I'm not sure
1288 times are in Bacula units.
1289 kes Apply Eric's batch-insert patch.
1291 kes Update projects list.
1293 kes Implement Include/Exclude file lists in FD as dlists using
1294 the new dlistString class. This permits efficiently having
1295 large include/exclude lists and completes project Item 25.
1296 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1297 console is authorized to cancel the job. This fixes bug
1299 kes Modify SD so that the VolCatJobs medium record is updated
1300 at the beginning of a Job rather than the end. This
1301 fixes bug #775 where exceeding MaxVolJobs caused jobs
1303 kes Added a mutex around getting and setting Volume information
1304 so that multiple simultaneous jobs will single thread.
1306 Switch to using Subversion
1307 kes Remove src/pygtk-console/ from configure
1309 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1310 plus the entrypoints.
1311 kes Apply patch supplied that corrects debug print
1312 in canceling jobs for max run time. Supplied as
1313 part of bug #621, which was previously fixed.
1315 kes Test on job_canceled() and sd_msg_thread_done inside
1316 loop starting the message thread to avoid a race condition.
1318 kes Remove rl_catch_signal from console.c as it conflicted
1319 with the header definition. Fixes bug #765.
1320 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1322 kes Clarify some stored/acquire messages to indicate if the
1323 problem is with read or append.
1325 kes Fix memory leak with storage ids in cats/sql_get.c
1326 kes Terminate watchdog earlier to avoid reference to released
1327 memory -- reported by Jason Austin.
1328 kes Move closing the database from jobq.c to the director daemon
1329 termination routine. This fixes memory leaks for shadow jobs
1330 (i.e. migration jobs).
1331 kes Free up the unique jobid chain items in migrate.c. This fixes
1332 a memory leak problem.
1333 kes Convert some ugly looking for statements to use foreach_alist
1334 in findlib/find.c. This will facilitate converting the structures
1335 to use dlist (for large include/exclude lists).
1336 kes Fix a bug in the btree.c and btree.h routines, then rename them
1337 rblist and add them to be built in src/lib. Include some new
1338 methods written by Rudolf Cejka that make the code more readable
1339 (hides some of the ugly casting).
1340 kes Add set_next() and set_prev() methods which make the code much more
1341 readable. Also add a new dlistString class that facilitates storing
1342 strings in dlists. To be used in the large include/exclude lists.
1343 kes Make some trivial modifications to lib/tree.h that use rblist
1344 rather than dlist for storing the tree links. This was suggested
1345 by Rudolf Cejka. The result of this is that the restore tree now
1346 uses red-black binary trees rather than simple linked lists. This
1347 should give rather dramatic speed improvements for directories
1348 contining large numbers of directories/files (more than 10000).
1350 kes Fix maxruntime bug #621.
1352 ebl Implement the include JobID in spool file name project.
1353 kes Reorder projects file in order determined by Jan 2007 vote.
1354 kes Implement item #12 on project list -- quick release of FD by
1356 kes Fix open of SQLite3 db where user does not have write permission
1357 so that DIR does not crash. Fixes bug #761.
1359 kes Add back missing @ in Win32 Makefile.
1360 kes Change 'Device not configured to autolabel' from INFO
1362 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1363 which should restart an indefinite # of times.
1364 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1365 other DIR specifications.
1367 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1368 Fix path quoting in SQLite scripts.
1369 Fix problems with SHGetFolderPath.
1371 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1373 kes Fix Job restart on error bug that promotes an Inc to a Full
1374 backup. This should fix bug #755.
1375 kes Add qt-console and first cut of code.
1379 kes Fix Bacula->Documentation link on Win32 to point to index.html
1380 instead of bacula.html. Fixed bug #750.
1381 kes Return JobId in db_get_job_record() when JobId==0. This should
1383 kes Do not release source pointers when restarting a failed job.
1385 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1386 This *should* fix bug #747.
1387 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1390 kes Modify USTORE constructor to set an empty store_source string,
1391 and don't copy the store_source string in a cancel. Hopefully
1392 this will fix Arno's seg fault, bug #744.
1393 kes Add back code to disable conio in configure. Fixes bug #743.
1394 kes Correct the Options scanner in the FD to correctly handle
1395 SHA1 option, which was eating the next option. Reported by
1397 kes Add code to indicate when the SD is spooling, spool wait, and
1398 despooling as requested by Alan Brown.
1400 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob