1 Technical notes on version 2.3
5 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
7 kes Increase the max block size to 4MB fixes bug #957.
8 kes ERABT if user sets min block size > max block size. Fixes bug #956.
9 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
10 is not properly mounted (recognized) during a poll.
11 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
12 Job that has differences reports Verify OK.
13 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
15 ebl Add an option to operate on all pools with update vol parameters.
16 This complete the project 20. Patch from Nigel Stepp.
17 ebl Add history support to bconsole when using readline.
18 Using Ctrl-D to exit doesn't update .bconsole_history
19 kes Modify new volume algorithm to use max MediaId for generating next
20 volume number rather than the count of Volumes. This should essentially
21 eliminate the failure rate if some volumes were deleted. Bug #921.
22 kes Begin implemention of Optimize Job Scheduling.
23 kes Implement restore callback that Dirk and I agreed on for bat
24 restore. This fixes bug #928. Restore of backup of zero files fails.
25 kes Fix SQL Catalog logging which broke with new db_escape_string
28 kes Fix bacula_cats.def for new db_escape_string().
29 kes Increase size of name string when FD making connection to SD.
30 May fix bug #953. FD->SD connection failure.
32 kes Add code to help Dan debug 2drive-incremental-2disk test.
33 kes Add code to try to fix bug #908.
34 kes Add waits to multiple exit detection code to try to force pid
35 file to always be deleted.
36 kes Restore good dev.tar.gz to rescue set appropriate binary property.
38 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
39 trying to switch drives by checking for blocking before unblocking.
41 kes Cancel storage daemon in all cases where FD reports error. This
42 should fix virtually all cases of bug #920.
43 kes Fix db_escape_string() for MySQL which did not compile.
45 kes Fix error message that was clobbered when Dir tells SD it does not
46 have write permission on Volume. This should fix a minor point
47 in bug #942, but not the main problem.
48 kes Add code to cancel job in SD if FD connection fails. This should
50 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
51 dvl Pass jcr and db into db_escape_string() to enable better escaping
53 kes Fix migration code to get correct Volume name with multiple volumes
54 by skipping |. Fixes bug #936.
55 kes Implement patch supplied by Landon to fix bug #944 where using
56 TLS with bconsole uses 99+% of the CPU.
57 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
59 kes Move patches into patches directory.
61 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
64 ebl Using "m" in bconsole will show messages like before,
66 kes Fix bug #935, and probably also bug #903 where files were not
67 restored. MediaId was not properly set in JobMedia record after
70 kes Suppress chown and chmod error messages if the FD is not running
73 kes Apply Martin Simmons' patch that should turn off the new API usage
74 when batch insert is turned off allowing building on older
76 kes Add ./configure search in qwt-qt4 for qwt package
78 kes Bacula is now free of 3rd party GPL copyrighted code!
80 kes Add guid_to_name.c/h which replace idcache.
81 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
83 ebl Detect if new PosgreSQL batch insert API is present.
84 kes Correct incorrect mempool call causing Director crash. Occurs on
85 systems without va_copy().
86 sb Update spec files for 2.2.1 release
88 kes Fix memory pool call in ua_output.c. bug #934.
89 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
90 Add test program to fnmatch.c
92 kes Integrate patch to README.vc8 from
93 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
94 edit it to get it into Unix patch format.
95 kes Implement mkpath.c to replace old FSF makepath.c
97 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
101 kes Update POTFILES.in
102 kes Cleanup a few underquoted AC_DEFUNs in configure
103 kes Apply patch from Martin Simmons that adds a test for va_copy to
106 kes Fix bug #921 by increasing the number of tries to create a new volume
108 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
109 can be called multiple times. Implement a version for machines
110 without va_copy() that gets a big buffer.
112 kes Integrate more portable zone offset code into bsmtp.c
113 Submitted by Attila Fülöp.
115 kes Fix bad SD->FD return status reported by
116 (James Harper) <james.harper@bendigoit.com.au>
117 ebl Fix a bug in read_close_session which return random status
118 thanks to James Harper
120 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
121 and directory names during restore of single file/directories.
122 kes Add sanity checks to .sql command when string is empty. Hopefully
123 that will resolve Dirks Director crash.
125 kes Apply patch submitted by Martin Simmons that corrects a seg fault
126 in the bsmtp chat subroutine when debug is >= 10.
128 kes Fix Director crash when running bat SQL queries.
129 kes Add David's notes on Item 8: Copy pools.
131 kes Rework projects file to be current and ready for a vote.
132 kes Enhance lex scanner error message.
134 kes Tweak LICENSE file to mention BSD code.
135 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
136 if specified on the ./configure.
137 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
138 This class is intended to allow us to open a second bsock to the
139 Director while in the restore subdialog.
141 kes Fix configure to create bat Makefile before creating dependencies.
142 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
143 kes Add a tooltip to the tray monitor.
144 dvl Set the Director's PID file before dropping privs. This fixes
147 kes Update AUTHORs file
148 kes Increase the default max concurrent jobs to 20 in FD and SD to
149 correspond with the default .conf files.
150 kes Rewrite the Win32 service routines. This eliminates the 3 copies
151 some different, of the same file created by RN when porting the
153 kes Rearrange some of the Win32 directories and the placement of the files
155 kes Set DEVELOPER flag in version.h
157 ========================================================================
158 Release Version 2.2.0
160 kes Apply a second doc patch from Marc.
161 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
162 improves the tips section that discusses how to setup multiple
165 kes Update bat README file.
166 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
167 corrects a typo in the Recycle status check in db_find_next_volume().
168 This will probably fix a number of annoying problems with multiple
170 kes Modify most of dird/msgchan.c to use bsock class calls rather than
171 bnet calls -- no functionality change.
173 kes Modify the Verify output to specify if files are missing on
174 the Volume(s) or disk. Fixes confusion in bug #916.
175 kes When more than one Volume is read in a migration job, the last
176 Volume bytes reported are from the last read volume rather than
177 the last written volume. Fixed. This fixes bug #910.
178 kes Fix display of Recycle flag after update volume=foo recycle=yes.
179 It previously printed New Recyle flag is: no. This fixes bug
182 kes Correct seg fault when switching tape drives during restore.
183 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
184 be used until after 2.2.0 release.
186 kes Remove fnmatch() in SD that permitted wild card specifications.
189 kes Fix %g in filename returned by SQL for browse tree reported by
191 kes Fix configure so that it puts config.out in the cwd rather than
193 kes Attempt to fix the locking problem reported by Eric in bug #906.
194 kes Make berrno class to leave errno unchanged after constructor call.
195 kes Make bnet_server use the heap rather than the stack to allocate
196 its socket fd pointers to avoid a crash at termination. Problem
197 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
199 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
200 and putting it in depkgs-qt along with Qt4.3.
202 kes Rework code in acquire.c that switches drives for reading when
203 the Media Type does not match. This should fix bug #906
205 ebl Fix a director segfault during job setup #907
206 kes Correct seg fault in postgresql when first operation returns no
207 rows. Fixes Dirks File browser problem seg fault with bat.
209 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
210 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
213 kes Implement PopUp YES/NO dialog for bat.
215 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
217 kes Correct RunScript to terminate job in FD on failure.
218 kes Change abort_on_error and AbortJobOnError to fail_on_error
219 and FailJobOnError in RunScripts.
220 kes Minor tweaks of code formating in RunScripts, principally to
221 avoid depassing 80 columns.
223 kes Eliminate one #ifdef Win32 in bsmtp
224 kes Implement grow tool to grow a file for testing very large databases.
225 kes Add big-vol-test to test Bacula seeking with > 5GB.
228 kes Modify find_next_volume() to return all values in Media record.
229 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
233 kes Update Release notes
235 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
236 Warning, in previous beta version, all media get from scratch keep their
239 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
240 This should fix bug #842. Made a note to look at removing the temp
241 files at the end of the install.
242 kes Add ability to mount and unmount a file device providing it is
243 marked as being removable and has the appropriate mount and unmount
244 commands defined in the Device resource. This fixes bug #830.
245 kes When applying a storage override, release all previous storage
246 definitions rather than just prepending the new storage.
247 This should prevent a good deal of confusion.
249 kes Implement ./configure search for qwt libraries.
251 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
252 Win32 FD. This should fix bug #893.
253 kes Remove an unnecessary beep in Win32 init code.
254 kes Update copyright dates in Win32 executable about boxes.
255 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
256 code with a BSD getopt.c and getopt.h.
257 kes Remove sched.h from the Win32 compat directory -- not used.
258 kes Remove the Exit menu item from the Win32 tray monitor. If you really
259 need to shut it down, do it through the services panel or the command
261 kes Remove some inappropriate Bacula FSFE copyrights.
262 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
263 kes Fix regress config non-portable test as pointed out by
264 Florian Heigl <florian.heigl@gmail.com>
265 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
266 as pointed out by Florian Heigl <florian.heigl@gmail.com>
268 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
269 Reported by Frank Sweetser.
273 kes Fix client-only build.
274 kes Integrate client-only fixes for bsys (initgroups) and conio from
275 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
276 kes Make arguments to get_scratch_volume() in same order as other
278 kes Rework the prune_volumes() subroutine so that after purging and
279 no volume found in desired pool, it will check for a scratch
280 volume. This prevents recycling the whole scratch pool.
281 kes Add code to status storage to print boffset_t (largefile support).
283 kes Move qwt (Graphics libarary for Qt4) to depkgs.
284 kes You now need a --with-qwt=<dir> to be able to build bat.
285 kes Update src/win32/cats/bacula_cats.def to include the new
286 db_get_query_dbids() call on Win32.
288 kes Correct a problem when selecting a scratch volume and moving
289 it to another pool that lost some columns.
290 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
291 kes Enhance Autochanger error messages to include Volume and device name.
292 kes Rework prune_volumes() code to take account of InChanger flag,
293 and to handle recycling volumes going to the Scratch pool and
294 current pool because the RecyclePool directive.
295 kes Implement a better and more efficient db_get_query_dbids() to
296 handle creating and passing back a list of DBIds.
300 kes Start work on new more efficient DBId subroutine. First use
301 will be for recycling volume to Scratch inchanger.
302 kes Increase number of JobIds in pruning from 1000 to 10000.
303 This to be replaced by above routine.
304 kes Begin implementation of building Qt4 on Win32.
305 kes Correct typo in fix I added for bad TLS shutdown.
306 kes Pull 2.0.3 patches into patches directory.
307 kes Update Release notes. Include qt-console in line count.
308 kes Update Projects file.
310 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
311 bug in migration code where a job that spanned two volumes
314 kes Implement new BST_DESPOOLING blocked state. Change from locking
315 during despooling in SD to blocking. This means that other threads
316 can work with the device structure, in particular the reservations
317 system while despooling.
319 kes Fix return in reservation message queue that missed clearing
320 the jcr lock (implemented 26Jun07 below).
321 kes Rename a number of dev methods to make locking function names
323 kes Document locking in lock.c. Move lock structures to new file
326 kes Move reservations message lock to lock jcr only this
328 kes Move main SD locking code into lock.c (new file).
329 kes Update Win32 build to include lock.c
333 kes Dirk committed the qwt library code for drawing graphs in bat.
334 kes Tweak install of qwt so that it is integrated with ./configure.
336 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
337 out by Eric (my typo).
338 ebl Fix configure.in to get batch mode enable
339 kes Return correct string from authenticate.cpp in bat when connecting
341 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
342 spurious line drops when using TLS.
343 kes Do not file reparse points when restoring a file that already
346 kes Implement Windows reparse points -- similar to directories, but
347 we do not descend into it. This is a first cut. They seem to
348 be backed up, but restore is not yet tested.
349 kes Remove restore_blocking in tls code when shutting a socket to leave
350 it in blocking mode. Hopefully this will fix the encryption bug
351 reported by Frank Sweetser.
352 kes When opening a file for backup, tell the OS that we are going to
353 read it sequentially -- optimization.
354 kes Change variable names in authenticate_director() to not conflict
355 with member names in bat. Caused great confusion with compiler,
358 kes Queue openssl error messages in case of comm problem.
359 kes Do shutdown() call if socket terminated.
360 kes Remove some duplicated code in tls.c
361 kes Move more of the bsock member variables into private and access
363 kes Add Frank Sweetser's tls-test to the regression suite.
365 kes Add Swedish sv.po file
367 kes Don't print clock skew message in FD if less than 3 seconds diff.
368 kes Add a bit of VSS info to status client.
369 kes Implement a first cut of Vista VSS, using Win2003 code.
373 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
374 loaded tape but uses first drive).
375 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
376 This was indeed a Win32 issue.
378 kes Simplify search of autochanger for in-use Volume.
379 kes Fix exit condition of check for in-use volume. kes Remove
380 inappropriate my_postgresql_free_result() in db_close()
382 kes Fix bad return in FD when encryption signature not found.
383 Probably caused a crash.
384 kes Inhibit missing encryption signature error messages for
385 file types where no signature computed.
386 kes Correct inverted check on autochanger in reservation system.
387 kes Tweak debug code in autochanger reservation.
389 kes Add some additional locking in the cats directory in subroutines
390 that modify packet variables called from batch insert.
391 kes Rework how dcrs are allocated. new_dcr() can now be called
392 with an existing pointer, and it will simply clean it up.
393 This allows the reservation system to test various different
394 devices, and will permit easy device changes.
395 kes A bunch of changes all over to handle new new_dcr() calling
397 kes Work more on the Volume management in the SD. Remember Volumes
398 for tape drives and for autochangers (even virtual disk changers).
399 kes When looking at the Volume list to reserve a drive, handle
400 autochanger names correctly by interating through the changer
401 devices. Also call the Director to see if a Volume is suitable
403 kes Fix some bugs in bscan. Make sure all media records are written.
404 Make sure that valid JobMedia records are written for disk files.
405 Previously they were completely wrong.
406 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
407 that the URLs don't change and so that the developers will all
408 work off the same copy. Rebuild from scrach.
409 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
413 kes Fix seg fault in FD from incorrect digest size.
414 kes Fix argument to non-OpenSSL crypto.c subroutine.
418 kes Remove a few malloc()s from the encryption code.
419 kes Use the class calls to bsock in filed/backup.c and restore.c in
420 place of the old bnet_xxx code.
421 kes Implement code that does an on the fly calculation of the
422 signing digest during restore of encrypted files. It makes
423 a best guess at the algorithm, and if it is not correct, will
424 then revert to the old code which reads the file after it is
426 kes Implement at least one missing crypto stream in stream_to_ascii()
427 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
428 #877 where a reload with bad syntax causes Dir to exit.
430 Cut: 2.1.14 beta (not released)
432 kes Do not free a volume on a tape drive until another volume is
433 mounted and read, or the autochanger unloads the volume.
434 This should help the SD re-use volumes that are already mounted,
435 and should fix bug #886.
436 kes Apply patch from user brettedgar that allows gnome2-console include
437 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
438 kes Apply patch from Lucien Weller that fixes day of week calculation
439 because of DST flag problem. Fixes bug #887.
441 kes Move find_next_appendable_volume() to after acquiring a valid device
442 in reserve.c. This fixes bug #864 -- confirmed by reporter.
444 kes Unable to reproduce bug 872. However added additional testing for
446 kes Bug #874 resolved by documenting SQLite limitations.
447 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
448 kes Bug #881 resolved by removing typo in mtx-changer script.
449 kes Made Frank Sweetser's wiki the official Bacula wiki with his
450 approval. Added a link to the wiki on the web page, and implemented
451 a backup from http://paramount.ind.wpi.edu
453 kes Fix update allfrompool to pass pool name.
455 kes Convert to pure GPL v2 license.
456 kes Fix sscanf problems reported by Peter Buschman that caused
457 a bus error on Solaris.
458 kes Rework (simplify) the select prompt in bat.
459 kes Move get_jobid_from_tid() into lib and create a
461 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
462 should definitely fix the problem of lost error messages in the
464 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
465 kes Eliminate tcpd.h from the project. Enclose the #include from the
466 library with extern C ...
467 kes Add print of signal name when a signal is trapped.
471 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
473 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
474 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
475 makes SQLit3 run 30 times faster, though a bit less safe.
476 kes Implement --with-batch-insert in configure and detection of thread
477 safe libraries. It is on by default, but turned off if no thread
478 safe library (e.g. SQLite 2) is available.
480 kes Fix Bacula PostgreSQL buffer overruns.
481 kes Do better checking for NULL results returned from PostgreSQL;
482 implement retry for failed queries; clear results buffer after
483 failed query. Hopefully this will correct the PostgreSQL failures.
485 kes Implement algorithm to handle only one appendable volume with
486 Prefer Mounted Volumes = no.
487 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
488 returned from a query.
489 kes Make volume lock recursive.
490 kes Implement an additional volume reservation algorithm that
491 starts by considering all reserved volumes then uses the
492 old brute force algorithm of searching the resources to
493 find a suitable device.
494 kes Add new reservations debug code and refine the old code.
495 kes Update the win32/dll/bacula.defs file.
497 kes Tweak reservations algorithm to permit a few more cases, i.e.
498 volume reserved, but on different drive, ...
499 kes Enhance SD status to include Pool and Media Type for drive in a
500 more readable format (a bit longer).
501 kes Fix PostgreSQL double free.
503 kes Minor refactoring of restore decryption code.
504 kes Add code to smartall.c to detect double free of a buffer.
506 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
507 so that bsmtp will create a correct email address (mailbox only).
508 kes Modify 'memory' command so that the buffers are listed as 'In use'
509 to avoid confusion with Orphaned buffers.
510 kes I reworked the OpenSSL include/lib flags to be handled in
511 the standard Bacula way, which should fix bug #863 concerning
512 non-standard OpenSSL libraries.
514 kes Implement Help Browser window for bat.
515 kes Fix reload bug that reset StorageId to zero.
517 kes Fix TLS #ifdefing when TLS turned off.
518 kes Ensure that when labelling a tape with Slot=0 that InChanger
520 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
522 kes Add StartTime to final uar_sel_jobid_temp query so that we can
523 add DISTINCT (required by PostgreSQL).
524 kes Implement BSOCK authenticate_director() method. Eventually will
525 authenicate all daemons.
526 kes Move several more functions into the BSOCK class.
528 kes Add code to tell the OS that we no longer need a cached
529 file that we were reading. In findlib/bfile.c. Also,
530 only cache files that we are reading. Thanks to
531 Tobias Oetiker <tobi@oetiker.ch> for the idea.
532 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
533 kes Implement script to automatically generate cats and dll .def
535 kes Update README.mingw32 to include new .def file generation.
536 kes Correct typo in UTF-8 error message as reported by:
537 jhernandez <julianhernandez@gmail.com>
538 kes Add additional sm_check() code on debug level 1.
539 kes Set default debug level to 1.
540 kes Trap SIGABRT in attempt to get traceback.
542 kes Reduce bat connect timeout from 30 to 15 seconds.
543 kes More restructuring and implementing BSOCK class in place of
545 kes Remove a few unnecessary malloc() tests in crypto code.
546 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
547 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
548 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
550 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
552 kes Fix Verify InitCatalog. The attributes were not pointing to the
553 correct saved location.
554 kes Implement message callback so that GUI is sure to get all
555 daemon messages. Currently displayed in a dialog in bat.
556 kes Ignore SIGUSR2 (Bacula timer) in bat.
557 kes Apply regress patch from bug #859 to allow regress to work
558 with Solaris compiler.
560 kes Begin adding TLS support to bat.
561 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
562 clean up lex.c and make it more readable.
564 kes Move more bnet functions into the BSOCK class.
565 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
566 kes Complete change of berrno strerror() method to bstrerror()
570 kes Cleanup incorrect email addresses in bsmtp.
571 kes Make bat display initial messages rather than discard them.
573 kes First cut of adding .mod to the run command.
574 kes Implement auto display of messages in bat.
575 kes Enhanced preferences to allow all Bacula output to be
578 kes Try to make bsmtp date routines more generic.
579 kes Fixed bug #856 autochanger documentation.
580 kes Rework bsmtp date editing for Win32. This fixes bug #854.
581 kes Add new cats entry point so Win32 builds.
583 kes Attempt to fix bsmtp date editing on OSes without %z editing.
585 kes Do better checking for the MySQL 64 bit libraries looking for both
586 .a and .so libraries.
587 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
588 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
589 kes Require the thread safe version of MySQL during configure. Thanks
590 to Andre Noll for pointing this out.
591 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
592 continuing in migration code.
593 kes Apply implementation of tray-monitor font derived from gnome-console
594 submitted by Andreas Piesk <a.piesk@gmx.net>
596 kes Eliminate important memory loss in SQLite
597 kes Fixed the batch insert MySQL thread specific data that was not
598 being freed. See cats/mysql.c:db_thread_cleanup().
599 kes Fix restore before command.
600 kes Convert old hdr.name to name() in a few places.
601 kes Implement update jobid command.
602 kes Return all time_t dates in db_get_job_record()
603 kes Stop watchdog in SD earlier.
604 kes Put Pool just after Storage in please mount message.
605 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
608 kes Update the po files.
609 kes Fix Verify InitCatalog by making it cache attributes.
611 kes Change name bacula-bat to bat for man 1 page to correspond to
613 kes Check for client and store NULL pointers in status command. This
615 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
616 kes Fix sign extended editing of %p.
617 kes Clean out a little old #ifdefing in cats/mysql.c
619 kes If time diff between DIR and FD is more than 600 seconds convert
620 INFO message to WARNING.
621 kes Implement heap size display in status for all daemons.
622 kes Attempt to fix MySQL db open memory loss (not successfull).
623 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
624 kes Eliminate memory loss in MySQL (possibly other SQLs) during
625 Query. This looks like a MySQL but but by doing extra releases,
626 the memory goes away. This should fix bug #847.
628 kes When backup fails, cancel SD before waiting for sd termination.
629 kes If SD is waiting for FD to connect during cancel, wake up the
631 kes Fix fsf code so that errno is correctly reported.
632 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
634 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
635 so that Bacula doesn't later stumble into a seg fault.
636 kes Use the term Restore Client in the restore Job report.
637 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
638 the original job's FileSetId.
639 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
640 spooling in migration jobs. Not yet tested.
641 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
642 reading conf file from a pipe. However, do it with open_bpipe()
643 rather than popen. Not yet tested.
645 kes Fix an ugly bug where the VolCatBytes were getting updated
647 kes Implement bconsole memory command that prints current memory
648 usage, plus smartalloc dump.
649 kes Clarify some error messages in backup, admin, and migrate.
650 kes Shrink label dialog to smaller size.
651 kes Invert Cancel OK buttons on restore to be OK Cancel.
652 kes More strerror() to bstrerror() conversions.
654 kes Start implementing bstrerror() in place of strerror().
655 kes Stripping path -- seems to work.
657 kes Prevent door and port files from being restored (mostly
659 kes Free an unreleased buffer in compat code.
660 kes Change console Job name from *Console* to -Console- to eliminate
661 Win32 filename problems. Put Win32 path separator when creating
662 Console file. This fixes bug #846.
663 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
665 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
667 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
668 to force Win32 error message.
670 kes First cut strip path. The data should be passed to the FD,
671 but nothing is done with it yet.
672 kes Enhance the digest and signature routines in the crypto
673 library to accept a JCR and to use it to print error messages
674 so that they will go in the Job report rather than the daemon's
676 kes Simplify some of the verify signature code.
677 kes Simplify a few of the alternative returns in the signature
680 ebl Use only POSIX regex instead of GNU regex in breg.c for
681 File relocation. It fix broken freebsd compilation.
682 kes Convert all other Dir files to use new ua class message
684 kes Tentative fix for missing digest signature in bug 807.
685 kes Correct handle problem in new win32_ftruncate routine.
686 kes Convert ua_purge.c and ua_update.c to use new ua class
687 message routines for bat.
689 kes Correct incorrect installation of LICENSE in Win32 installer.
690 kes Display LICENSE at the beginning of the Win32 install.
691 kes Attempt to correct the need for the png files to be installed
693 kes Reapply my bat.conf install script in qt-console. I think I
694 editted bat.pro instead of bat.pro.in and it was lost.
695 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
696 the /var/lock/subsys for subsysdir. Also corrects typos in the
699 kes First cut update job.
700 kes Correct configure to include qmake of src/qt-console directory.
702 kes Make restore job yes/mod/no print in one command so GUI works.
703 kes First cut implementing backup and restore client.
704 kes Correct editing in Verify output that caused a seg fault.
706 kes Insure that bat.conf is not overwritten during installation.
707 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
708 while I was implementing migration in March 2006 !
710 ebl Cleanup file relocation, using char *RegexWhere instead of
711 char *where + bool where_use_regexp
712 kes Update some manpages and add bat manpage.
713 kes Make a first cut at converting bacula.spec.in for bwx-console
715 kes Apply patch from John Goerzen to add hostname as fourth argument
716 to make_catalog_backup script.
717 kes Fix typos I introduced into bsmtp.c
718 kes Make pm_strxxx() routines handle input of NULL pointer. This
719 is to protect from NULL pointers returned from SQL databases.
720 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
721 kes Add more debug to FIFO code -- fix fifo regression test.
723 kes Implement posix_fadvise in FD, and for reading spool files in SD.
724 kes Add thread timer to bnet_connect() to break from OS if wait time
727 kes Update Win32 build to include new files, new symbols, and
729 kes Implement socket level heartbeat (tcp_keepidle)
730 ebl Commit File relocation patch
731 kes Make bat have 'make install' target.
732 kes Warn during install if old gnome-console binary found.
733 kes Warn during install if old wx-console binary found.
734 kes Add -8 option to bsmtp command line to add content type utf-8.
735 Fixes bug #809. (Character coding problem in bsmtp).
736 kes If < is found in target (from, to, cc) then do not enclose the
737 target in < > in bsmtp. Fixes bug #772 (malformed address).
738 kes When printing certain items in dbcheck, stop after 300000.
739 Fixes bug #822. (dbcheck loops).
740 kes Incorrect status in Dir after waiting for mount with poll set.
743 kes Extend idea of Prefer Mounted Volumes to mean a volume about
745 kes Print waiting to reserve a device every 5 mins.
747 kes Don't call close_part in label.c if tape and relabel.
748 kes Don't free volume if busy in close() -- should help with
750 ebl Fix #824 RunScript bug (After script could be execute twice)
751 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
752 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
753 Add a regression script to test RunScript
755 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
758 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
759 deprecated. No additional bugs will be fixed, and they will be dropped
760 in a future release (probably 2.4.0).
761 kes Change name of wx-console to bwx-console to make it more Bacula
763 kes Change the name of gnome-console to bgnome-console to make it
766 kes Some time in March, a Feature Request with patch from Jorj Bauer
767 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
769 The ability for the director to validate a Client (FD) CN against
770 an arbitrary set of patterns rather than the hostname, with
771 A new 'TLS Allowed CN' set of directives which are implemented
772 in the Client resource. Then pattern matching is used in place
773 of hostname matching against the Certificate's CN. As an example, we
774 have certificates which (a) use a local CA, and (b) have a CN of the
776 kes Add new/changed entry points to Win32 build
777 kes Create unaccepted-projects for projects that are not accepted.
778 kes Simplify locking in the reservations system.
779 kes Add more debug code in reservations.
780 kes Make sure error condition on reserving a volume is handled correctly.
781 kes Correct handling of volume_in_use.
782 kes Correct handling of initializing a device.
783 kes Move handling of broadcasting releasing a device into release_device().
784 kes Correct attaching dcr to dev so that it is only done if device
785 is properly initiated.
787 kes Locking debug level tweaks in SD.
788 kes Tweak new Volume code.
790 kes Add exec external-command [wait-seconds] to bconsole. This
791 executes the external-command. Note! normally external-command
792 should be enclosed in double quotes.
793 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
794 it should normally be off in a production system.
796 kes Implement die command for SD so that we can force it to dump.
797 kes Implement SD lock debug code.
798 kes Implement new algorithm for keeping Volume list in SD. It
799 is now owned by the device.
801 kes Implement new code for freeing in use volumes that should
802 resolve if not all, some of the problems of multiple drive
803 tape conflicts described in bug 801.
805 kes Fix gui/bacula-web/images files in svn.
806 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
808 ebl Fix a bug in batch mode (in string escape)
809 kes Correct migration prune SQL typo that crept in in a
812 kes Move bnet_despool() into class in bsock.c
813 kes Modify job report to include director name and Build OS.
814 kes Move drop root privilege and check_catalog() before fork.
815 kes Add update database scripts (version 9 to 10) to updatedb directory.
817 ebl Check size and age of each file after its backup to see if
818 it has changed during backup, if 'checkfilechanges' is set.
819 The FD will do an extra check (stat(2)) after
820 each file backup. mtime, ctime and size are compared with
821 'before backup' information. If time or size mismatch, an
822 error message will be generated. You must upgrade FD to use it.
824 kes Make database name and user configurable
825 --with-db-name=xxx --with-db-user=xxx
826 kes Add back database type to message.c for debugging.
828 kes Implement dir_sql() which issues an SQL query.
829 kes Modify bat medialist to use dir_sql() and do some minor C++
830 formatting as well as eliminating a number of pointers, simplifing
833 kes Fix some of the mtx-changer grep commands for tape label readers.
834 kes Convert a number of bsendmsg into the appropriate send/warning/error
836 kes Suppress the using database message in the .sql command.
837 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
839 kes Add context menu for floating a window.
840 kes Some minor cleanup and name changes in qt-console
841 kes Add doing mt setblk 0 in Win32 mtx-changer.
842 kes Apply Martin's bug fix to move definition of ENODATA for
844 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
847 kes More pruning cleanup.
848 kes Turn on wait_for_drive by default in mtx-changer.
849 kes Turn on Batch insert code by default as it now passes regression.
850 kes Add ./configure --enable-bat to enable building of Bat.
851 No install yet though.
853 kes Implement a new .sql command for bat.
854 kes Implement code to turn off pruning in obtaining the next volume.
855 Pruning is turned off for the status dir command, but turned on
856 for SD requests and for the list nextvolume command.
858 kes Correct Qmsg() that was not updated correctly when committing a
859 previous change (probably the recent TLS patch).
861 kes Write new subroutine is_volume_purged() that explicitly checks
862 if the Volume is purged, and if so marks it as such. This should
863 resolve problems reported about needing to mount twice to recycle
865 kes Rewrite pruning algorithm to do more work in the SQL engine, and
866 to pass a list of JobIds to be deleted to SQL. Also, minimize the
867 amount of duplicated code.
868 kes Do volume pruning only for the Media Type desired (reduces pruning time
869 if multiple Media Types are in the same pool).
870 kes Implement more detailed info in the Job report for the Bacula version
872 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
874 ebl Add bbatch tool to bench database and insert mode.
875 Fix sql quote stuff in batch mode
876 Fix sql stuff for mysql
878 kes Correct problems with am/pm scheduling. Fixes bug #808.
879 kes Implement new prunning code that prunes up to 1000 jobs at
880 the same time. The same technique can be applied to a number
881 of other prune/purge subroutines.
882 kes Add an insanity check when starting a new tape job to ensure
883 that the tape position has not been changed. If so fail the
885 kes Fix Win32 build for dlls to add the folllowing:
886 src/lib/bsock.c -- new file with new entry points
887 src/lib/dlist.c -- new entry points
888 src/cats/sql_create.c -- new entry point
889 src/cats/sql_cmds.c -- new DATA item exported
891 ebl batch mode cleanup bscan-test is ok now.
892 kes Implement SD code to check length of disk volume before appending.
894 kes Correct return status on db_batch... routines.
895 kes Add call to db_write_batch_file_records() to migration code.
896 ebl Fix AfterJob timing
897 kes Move the checking of the database in initializion of the Director
898 to after we drop privileges. This avoids the need for both root
899 and bacula access to the DB.
900 kes Correct a misplaced variable definition in src/filed/backup.c
901 kes Correct how the new batch insert db_create_attributes_record()
902 uses the arguments. Caused a seg fault in bscan.
903 kes Implement lock() and unlock() methods in DEVICE class.
904 Implement block() and set_block(xx) methods in DEVICE class.
905 kes Modify bnet_connect() so that it uses time() to check for the
906 wait time expiring (on some OSes, some system calls may not
908 kes Modify Verify to obtain the previous JobId when it is actually
909 running rather than at schedule time (as it was in 1.38.x).
910 kes Fix src/job.c to handle MaxWaitTime correctly. This should
912 kes When checking pid in pid file, continue running if the pid is
913 the same as ours. This occurs on IRIX after a system crash.
916 kes Extend new GUI API.
917 kes Make the ua structure a class, and implement send_msg(),
918 error_msg(), warning_msg(), and info_msg().
920 kes Apply fix from for building wx-console on the Mac from
922 kes Implement new select mechanism for GUI programs.
923 kes Reorganize initialization of stackedWidgets in bat.
925 kes Add updated nagios plugin supplied by Christian Masopust.
927 kes More bat implementation.
928 kes File migrate bug with Pool Occupancy using mediaid instead
929 of jobids. Fixes bug #795.
930 kes Fix orphaned buffers in filed backup and verify due to
931 crypto buffers not freed during errors. Fixes bug #789.
932 kes Extend new GUI api code to tree commands.
933 kes Ensure that tree and dot commands check console ACLs.
934 kes Permit marking directory with trailing slash.
935 kes Allow 20 console connections (instead of only 10).
937 kes Add smartctl call to bacula-sd.conf as an example of getting
940 kes Modify jobq.c to let simultaneous restore jobs run. This may
941 cause them to fail if they cannot get a drive.
942 kes Add Client Connect Wait to Storage daemon to permit users to
943 modify the time the SD waits for a FD connection.
945 kes Correct virtual changer check which was backwards. This caused
946 volumes to be unloaded into slots already occupied.
948 kes Apply Command ACL filter to JobId list in restore command.
949 kes Correct typeo in var.c patch.
951 kes Don't let Bacula prune File or Job records for the current Job.
952 kes Fix variable substitution pad + inc bug reported (with patch)
955 kes Correct SQLite log table index as reported by Luca Berra.
957 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
959 kes Begin implementing new comm signals for API.
960 kes Fix a few places in lib/message.c where the open fd may
962 kes Continue implementing lib/bsock.c (real class). Make jcr,
963 who, host, and port private. There are new methods to access
964 them for non-class use. This required touching a number of files.
966 kes Add LANG=C to autoconf/randpass so it works with languages other
967 than English. Fixes bug #788.
969 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
971 You will not be able to generate Include/Exclude list any more.
972 It will be fixed soon.
973 If you want to use this, you can apply
974 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
976 kes Restore of sockets created false error messages because Bacula
977 no longer restores sockets, but the code was still trying to
978 set the attributes on a non-existent file. Reported by a user.
979 ebl finish RecyclePool feature
980 Media will takes Pool.RecyclePool
981 when moving from Scratch to a Pool or when user will do
982 update volume=xxx frompool
983 To use it, add RecyclePool = aPool to your Pool resource
986 RecyclePool = Scratch
990 kes Expand new BSOCK class adding signal() and new BNET signals.
991 kes Begin enhancing the dot commands adding a new API function
992 that returns more information and will make it easier
993 to interface to the Director from a program.
995 kes Make DEVICE fd private. Its new name is m_fd, and can be
996 obtained with dev->fd() outside the class. This is the
997 first of many DEVICE members to be made private.
998 kes Implement Michael Renner's idea on having a virtual disk
999 changer. I made some minor modifications (e.g. I did not
1000 implement the Virtual Changer directive, but simply set
1001 the Changer Command to an empty string.
1003 kes Implement a BSOCK send() method that writes the whole record
1004 in a single write() request rather than in two.
1005 ebl add update volume=xxx recyclepool=yyyy
1006 volume takes recyclepool from pool when using update volume=xxx from pool
1008 kes Fix encryption deblocking bug, which caused some restored files
1009 to be truncated. This fixes bug #763.
1010 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1011 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1013 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1014 ebl Use btime_t instead of uint64_t in media patch.
1016 kes Optimize the use of the database a bit in the Status dir command.
1017 Only open it when needed, ensure that if any previous database
1018 was opened, it is closed.
1020 kes Correct VolCatBytes bug from media patch.
1021 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1022 in the case of orphaned records.
1023 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1024 and File records in 300K chunks to be more efficient. This
1025 idea came from Juan Luis Frances (if I remember right).
1026 kes Apply Eric's scratch patch that moves a purged Volume to
1027 the RecyclePool. Question: how is RecyclePool set? what
1028 happens to the ScratchPool?
1029 kes Apply Eric's media patch that collects read/write media
1030 times as well as byte counts. This patch requires a
1031 simultaneous upgrade of the DIR and SD. Note, there
1032 should be some way to turn off timing. I'm not sure
1033 times are in Bacula units.
1034 kes Apply Eric's batch-insert patch.
1036 kes Update projects list.
1038 kes Implement Include/Exclude file lists in FD as dlists using
1039 the new dlistString class. This permits efficiently having
1040 large include/exclude lists and completes project Item 25.
1041 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1042 console is authorized to cancel the job. This fixes bug
1044 kes Modify SD so that the VolCatJobs medium record is updated
1045 at the beginning of a Job rather than the end. This
1046 fixes bug #775 where exceeding MaxVolJobs caused jobs
1048 kes Added a mutex around getting and setting Volume information
1049 so that multiple simultaneous jobs will single thread.
1051 Switch to using Subversion
1052 kes Remove src/pygtk-console/ from configure
1054 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1055 plus the entrypoints.
1056 kes Apply patch supplied that corrects debug print
1057 in canceling jobs for max run time. Supplied as
1058 part of bug #621, which was previously fixed.
1060 kes Test on job_canceled() and sd_msg_thread_done inside
1061 loop starting the message thread to avoid a race condition.
1063 kes Remove rl_catch_signal from console.c as it conflicted
1064 with the header definition. Fixes bug #765.
1065 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1067 kes Clarify some stored/acquire messages to indicate if the
1068 problem is with read or append.
1070 kes Fix memory leak with storage ids in cats/sql_get.c
1071 kes Terminate watchdog earlier to avoid reference to released
1072 memory -- reported by Jason Austin.
1073 kes Move closing the database from jobq.c to the director daemon
1074 termination routine. This fixes memory leaks for shadow jobs
1075 (i.e. migration jobs).
1076 kes Free up the unique jobid chain items in migrate.c. This fixes
1077 a memory leak problem.
1078 kes Convert some ugly looking for statements to use foreach_alist
1079 in findlib/find.c. This will facilitate converting the structures
1080 to use dlist (for large include/exclude lists).
1081 kes Fix a bug in the btree.c and btree.h routines, then rename them
1082 rblist and add them to be built in src/lib. Include some new
1083 methods written by Rudolf Cejka that make the code more readable
1084 (hides some of the ugly casting).
1085 kes Add set_next() and set_prev() methods which make the code much more
1086 readable. Also add a new dlistString class that facilitates storing
1087 strings in dlists. To be used in the large include/exclude lists.
1088 kes Make some trivial modifications to lib/tree.h that use rblist
1089 rather than dlist for storing the tree links. This was suggested
1090 by Rudolf Cejka. The result of this is that the restore tree now
1091 uses red-black binary trees rather than simple linked lists. This
1092 should give rather dramatic speed improvements for directories
1093 contining large numbers of directories/files (more than 10000).
1095 kes Fix maxruntime bug #621.
1097 ebl Implement the include JobID in spool file name project.
1098 kes Reorder projects file in order determined by Jan 2007 vote.
1099 kes Implement item #12 on project list -- quick release of FD by
1101 kes Fix open of SQLite3 db where user does not have write permission
1102 so that DIR does not crash. Fixes bug #761.
1104 kes Add back missing @ in Win32 Makefile.
1105 kes Change 'Device not configured to autolabel' from INFO
1107 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1108 which should restart an indefinite # of times.
1109 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1110 other DIR specifications.
1112 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1113 Fix path quoting in SQLite scripts.
1114 Fix problems with SHGetFolderPath.
1116 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1118 kes Fix Job restart on error bug that promotes an Inc to a Full
1119 backup. This should fix bug #755.
1120 kes Add qt-console and first cut of code.
1124 kes Fix Bacula->Documentation link on Win32 to point to index.html
1125 instead of bacula.html. Fixed bug #750.
1126 kes Return JobId in db_get_job_record() when JobId==0. This should
1128 kes Do not release source pointers when restarting a failed job.
1130 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1131 This *should* fix bug #747.
1132 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1135 kes Modify USTORE constructor to set an empty store_source string,
1136 and don't copy the store_source string in a cancel. Hopefully
1137 this will fix Arno's seg fault, bug #744.
1138 kes Add back code to disable conio in configure. Fixes bug #743.
1139 kes Correct the Options scanner in the FD to correctly handle
1140 SHA1 option, which was eating the next option. Reported by
1142 kes Add code to indicate when the SD is spooling, spool wait, and
1143 despooling as requested by Alan Brown.
1145 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob