1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Enhance a couple of SD debug messages.
29 kes Tweak unload flag setting and ensure it is set during swap.
31 ebl Fix #1091 about bad output in estimate command.
33 kes Modify autochanger locking to attempt to avoid race
35 kes Make sure device not busy before doing label command.
36 kes Display open() errors except when polling. Previously too
37 many were suppressed. This should fix bug #1070.
38 kes Fix Win32 reparse points. Bacula will not recurse into any
39 reparse point directory, including mount points, unless the
40 directory is explicitly mentioned at the top level (same as
41 with Unix). A file that is linked to another file will be
42 backed up -- much as Unix does for hardlinked files.
45 kes Remove double quotes from ChangeLog and ReleaseNotes
46 kes Remove StorageId test when pruning and recycling (Eric's changes).
47 kes Remove old form of locking when getting volumes -- causes deadlock.
48 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
49 the name unique and to eliminate compile time error.
50 kes Add accurate.o to Win32 FD Makefile
52 kes Fix cats dll build on Win32 after db_update_job_end_record
53 calling sequence change.
54 ebl Switch to tokyo dbm instead of htable in accurate code
55 ebl Include tokyo dbm to bacula source tree
57 kes Fix buffer overruns detected by Coverity.
59 kes Tweak joblog display.
61 kes Implement --without-qwt
62 kes Fix layout of restore tree dialog
63 kes Add configure bat QWT libraries, so that bat can be built
64 with or without the QWT libaries.
66 ebl Add dummy tape driver for regression tests.
67 kes Make sure we unload the right slot when swapping.
69 kes Add debug times, reduce size of two-pool-changer test
71 ebl Tweak autoconf scripts for faketape
73 kes Improve SD reserve debug code.
74 kes Testing an improvement to free up volumes no longer in use.
76 kes Rework SD acquire for read to handle autochanger Volume
78 kes Implement regression that explicitly tests swapping a Volume
79 from one drive to another.
80 kes Enhance disk-changer to detect most error conditions.
81 kes Fix SD code so that it properly swaps a Volume between drives.
84 kes Apply libdbi patch from Joao Freitas for regress and for
85 Bacula trunk. Regress now works with libdbi. Nice.
86 kes Apply .nobackup patch from bug #1077 submitted by
88 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
89 name into jobs cloned via the run directive.
91 kes Prevent a Volume that is being swapped from being freed from
92 the volume list. This will most likely fix, at least partially,
94 kes Fix strippath so that it does not get a buffer overrun and crash FD.
96 kes Remove 50 millisec wait in SD that broke debugger.
97 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
98 that a job may run, counted from when the job was scheduled.
99 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
100 a job may block waiting for a resource, counted from when the job starts
101 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
102 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
103 that implements multiple commands per line in the console when using
104 readline. Modify the default to use a semicolon as the command separator.
106 ebl Fix SQL query in migration code.
107 ebl Make accurate mode with hash disk pass regression tests
109 ebl Implement first cut of accurate backup with hash disk.
111 kes Force unload of volume when wrong volume mounted in SD.
113 kes Fix bat seg fault at termination.
114 kes Add Bacula generated version to bat about box.
117 kes Experiment with allowing multiple read jobs.
118 kes Move final volume swapping code to DCR method and
119 call it from acquire_for_read().
120 kes When wrong volume is mounted during read, unload_autochanger.
122 kes Integrate the libdbi changes from Joao Henrique Freitas
124 kes Stop searching for Volumes in SD askdir if DIR returns the
125 same volume name twice in a row.
126 kes Close bat console windows first to eliminate error message
129 kes Tweak the swap Volume from one drive to another code so that
130 it now seems to work.
131 kes Resolve several problems with recycling that broke the new
132 code (these problems are in 2.2.9 as well).
133 kes Remove the volume lock when calling the sysop code.
134 kes Don't mark a reserved volume with no writers as unused otherwise
137 kes Rework class structures for VOLRES, DCR, and DEVICE to make
138 the method names a bit more logical, and for more logically
139 handling the responsibilities.
141 kes Remove redundant code in terminating the scheduler that just
142 causes a seg fault in many cases.
143 kes Cleanup releasing a volume and make it a DCR method.
144 kes Improve algorithm for detecting pre-reserved volume and
147 kes Tweak volume swapping code so it works.
148 kes Correct name overloading in mount.c
149 kes Replace released flag in VOLRES with reserved and add access
150 methods for the VOLRES class.
151 kes Prevent volume from being released while being swapped.
152 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
154 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
156 kes Refactor parts of stored/mount.c
158 ebl Add sanity checks for VolWriteTime and VolReadTime
159 ebl Take care of bad clock changes while computing VolWriteTime
160 and VolReadTime. This should fix or limit #1066
161 kes Correct error string numbers in dird/catreq.c
162 kes Restructure reserving, acquiring, and mounting volumes. Calls to
163 autochanger are deferred for mount.c -- simplifes the code.
165 kes Do not prune any running job. It just fails the job.
166 kes Lock the volumes when changing dev->reserved_device and marking
167 the volume unused otherwise the device can get reserved by
168 another job before the volume is released, thus blocking it.
170 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
171 kes Fix bug #1063, reuse of freed ptr in list nextvol.
172 kes Release regex compile buffer in filed/job.c
173 kes Add proper type of const char in sql_create.c
174 kes Turn off debug in daemon termination routines
175 kes Move free_volume_list() before devices are freed in stored.c
176 kes Fix reference to uninitalized stack variables in bregex.c.
177 This should correct bug #1067.
179 kes Fix possible seg fault in SD when freeing a volume entry.
181 kes Implement unload_dev() before swap device.
182 ebl Add statistics prunning with option and menu
183 kes Separate unload_dev() from unload_other_device() in autochanger.c
185 kes Apply patch from bug #1069 that corrects spurious error messages
186 when ACLs enabled on SGI but no ACL exists.
187 ebl Fix small segfault in bacula-sd when debug level is 500
188 kes Modify run_program() and run_program_full_output() to use
189 call by reference for the results string. This corrects a long
190 standing problem where the address of the string may be changed
191 in the subroutine but not in the calling program.
193 kes Re-enable code to remember last volume mounted on a non-tape
195 kes Add patch supplied in bug #1068 that fixes a SD crash when using
196 a Virtual autochanger.
197 kes Generate correct JobMedia records during spooling/despooling when
198 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
199 <tih@hamartun.priv.no> for excellent analysis and testing.
201 kes Tweak hash algorithm for htable using Martin Simmons idea
202 for doing a circular shift.
203 kes Remember what volume is in VTLs (previously turned off for
205 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
206 pointed out some problems in creating JobMedia records during
207 spooling with concurrent jobs. Fix the problem by updating the
208 start file position before despooling and generate a jobmedia
209 record at the end of despooling.
211 kes Fix handling of JobMedia records during spooling and when a
212 Volume is changed without actually writing data to the Volume.
214 kes Rework certain SD locking based on gdb tracebacks of deadlocks
215 sent by Eric. This code now uses only the volume_lock() rather
216 than the reservations lock when at EOM and acquiring a new
218 kes Ensure only one exit point in several subroutines.
220 kes Implement bsock code to permit locking. Use the new code in Verify
221 in the FD to prevent the heartbeat thread from disrupting the Verify
222 data sent to the Dir.
223 kes Modify SD locking to eliminate locking the reservations system from
224 outside the system. Use the volume lock when getting media data
225 and reserving a new volume at end of media.
226 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
227 when SD starts are not locked into place.
229 kes Fix error compiling runscript code on 64 bit machines.
230 kes Tweak Win32 mount point code.
231 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
232 cleared giving bad file estimate).
233 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
236 kes Keep Schedule run lists in order as suggested by
239 kes Implement autostart scripts for Debian.
240 ebl Implement upgrade catalog scripts.
242 ebl Apply jobstat patch for long term statistics. Have to implement
243 purge stats command and upgrade scripts.
244 kes Fix mtx-changer.in for broken Debian mt program.
246 kes Fix large number of JobMedia records reported by Eric Bollengier.
248 kes Apply doc fix from bug #1062.
249 kes Resolve crash and improper restore wx-console Win32 restore
250 GUI. Fixes bug #1065.
251 kes Update Win32 wxWidgets to latest version.
252 kes Attempt to do correct handling of Win32 mount points. Should
254 kes Fix Win32 FD backup/restore memory leak due to improper termination
255 of BackupRead/Write. This fixes bug# 1038.
257 ebl Reduce memory usage for accurate backup, working only with ctime
258 and mtime. (not all Lstat field)
259 About 40MB for my linux system (400.000 files)
261 kes Add dcr->reserved_volume flag that allows us to release a volume
262 even if it is not vol->released. This allows maxvol2 to work when
263 Volumes expire and we are already writing to the device (i.e. a
264 volume is pulled out from under us by another job terminating after
265 we reserve the drive).
267 ebl Permit multiple command/console per runscript definition.
268 RunScript { command = /bin/true ; command = /bin/false ... }
269 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
270 (restart an application) just after the VSS snapshot on windows.
271 kes Don't zap dcr values during release_volume() as they might
272 have the next Volume to be mounted.
273 kes Fix AIX prototype.
275 kes Second cut of drive switching during backup.
278 kes Update Win32 version of wxWidgets to most recent version.
279 kes Tweak Copy job details.
280 kes Rework dir_find_next_appendable_volume to make a bit more effort
281 to find a suitable volume before giving up.
283 kes Make ask_sysop_to_create... to return if waken from wait.
284 This helps get out of blocked conditions.
285 kes Experimental implementation of switch_device in reservations.
286 kes Implement FD version to allow easier protocol changes.
287 kes Add Plugin Options string -- not yet passed to FD.
288 kes Implement PluginOptions ACL.
290 kes Attempt to correct problems with restores with autochangers and
291 use counts going negative
292 kes Rework SD status command and implement API for bat. Implements
293 header, runing waitreservation, devices, volumes, spooling,
294 and terminated status keywords.
295 .status storage=xxx <keyword>
296 kes Clarify TLS error message by adding double quotes around name.
297 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
298 kes Pass jcr to tls routines so debug messages can be handled better.
299 kes Rework jobq resource allocation code, and possibly fix a bug
300 that caused reference counts to get out of sync.
302 kes Rename fd/dir plugin to use Bacula standard underscore.
303 kes Plugin work -- bring dir up to fd level.
304 kes Start implementation of VTL code
305 kes Fix Win32 build after adding new cats subroutine.
307 kes First cut at Duplicate Job implementation.
309 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
310 kes Start PluginOptions string, and refactor a bit of ua_run.c
311 ebl Apply Allan patch that permit to reset recyclepool.
313 kes Test patch -- possible fix or improvement for bug #1053
314 kes Refactor FD and SD status commands to permit new API code in
315 SD, and to fix Win32 build.
316 kes Win32 build is now working.
318 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
319 some ideas in patch from Scott Bailey.
320 kes Begin implementation of duplicate Job control.
321 kes Fix some of Win32 build after recent additions.
322 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
323 which causes the FD to detect whether or not the OS has the
324 honor no dump bit (*BSD systems), and if so, to skip backing up
325 any file with this bit set. The feature is enabled by setting
326 'honor no dump flag = yes' in the Options section of a FileSet.
328 kes Correct po warning message with datarootdir
329 kes Implement more code in dird.c to put configuration parsing in
330 a class rather than use globals.
331 kes Restructure SD status command for implementation of bat API
334 kes Suppress incorrect 'Will not descend from x into y' messages.
335 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
336 daemon globals used by parser.
337 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
339 kes Fix free of plugin_list when none exists.
341 ebl Apply accurate project patch.
343 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
344 on non-mempool object)
345 kes First cut of converting FD .status to work with bat API.
347 .status client=XXX header
348 .status client=XXX running
349 .status client=XXX terminated
350 kes Implement first cut of Copy Job.
351 kes Implement Catalog in Pool resource. It overrides catalog specified
352 in the Client resource.
354 kes Apply patch (with some difficulties) from Joao Henrique Freitas
355 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
357 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
358 ftruncate() actually works. In the case of some (cheap) NAS devices,
359 it does not, and so recycling NAS Volumes does not work. The code
360 simply unlink()s the file, then recreates it. This fixes bug #1011.
362 kes First incomplete cut of big malloc blocks for htable.
363 kes Tweak plugin code.
365 kes Plugin debug code + tweak a couple bat dialog layouts
367 kes Fix creating first JobMedia record during Migration to include
368 proper index. This caused slow restores of migrated jobs.
369 kes Temp fix to plugin name file_index.
370 kes Bacula backed up and restored a MySQL database.
372 kes Implement plugin restore.
373 kes Implement parsing of db_driver to give db_type index.
375 kes First cut of plugin restore code.
376 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
377 and do not strip paths on symbolic links.
378 kes Set catalog backup database and user name from values specified on
379 the ./configure line.
380 ebl Fix #1031 about wrong pool source information in job report.
383 kes Remove a redundant jcr argument to find_files, match_files, and
385 kes Implement '.status dir header|scheduled|running|terminated' that
386 prints the requested status section. With the exception of the
387 header, the other reports have fields separated by tabs (\t).
389 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
390 a resource embedded run command to find a since time if no explicit
391 since time was supplied on the command line.
392 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
393 that updates the state file at job termination time in addition to
394 when the daemon terminates.
396 kes First version where a plugin did a backup.
397 bpipe-fd.so created a backup file, wrote a test
398 string to it, and Bacua could restore this fabricated file.
400 kes Implement DB Driver = string for the DBI driver.
401 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
402 kes First cut of code for loading Win32 plugin dlls. Implement
403 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
404 and implement a dlfcn.h file based on opengroup's definitions of
407 kes First cut plugin directives.
409 kes Apply patch from bug #1049 to prevent stripping the path on a
411 kes Attempt to fix bug #1047 where stripping a path corrupts the
412 heap. Waiting for feedback.
413 kes Correct the Mount message not to suggest labeling a new tape
414 when doing a restore. Submitted by email by John Stoffel.
415 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
416 FD by using casting. Reported in bug #1042.
418 kes A bit of crypto cleanup. More later.
420 Release Version 2.2.8
422 kes Apply patch from Martin to correct bug #1040, bscan sets existing
424 kes Fixed important spelling error in doc -- bug #1045.
426 ebl Fix bextract to be able to extract non-portable Win32 data to
428 kes Move initialization of read/write res lock earlier in the code.
429 This fixes the crash with a null conf file. This fixes bug
431 kes Redefine CURES in lib/parse_conf to be URES and move it all
432 into lib/parse_conf.c -- this responds to bug #1042, but does
433 not fix it. The fix is not to compile with FORTIFY_SOURCE.
434 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
435 the trunk SVN. I don't think this was reported as a bug.
437 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
439 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
441 kes Add DataDespooling and DataCommitting status (committing is
442 the last despooling).
443 kes Finish implementation of new reservations code noted below.
445 kes Fix bsnprintf for float point numbers. I broke recently when
446 parameterizing some variables. This fixes bug #1036.
447 kes Undo recent reservations changes ... will apply them later
448 when they work better.
450 ebl Fixes #1034 which cause mysql to hang the connection after 8h
451 ebl Change default statistics target of filename.name and path.path
452 fields for PostgreSQL. This speeds lookup by indexes. Thanks
454 kes A few more tweaks to new reservation code. Make sure to clear
455 vol released flag when retaking volume. When reading label and
456 label is bad mark volume unused. When recycling, mark volume
457 unused so it can be renamed.
459 kes Fix reserve_volume() so it doesn't release a volume in use
460 (i.e. a volume entry not marked released). This should be
461 the last part needed to fix bug #1018.
463 kes Move Heartbeat documentation from Job to Director resource.
464 This fixes bug #1033.
466 kes Fix existing switch drive SD code to call autochanger to release
467 any old volume. This must be done to keep the autochanger from
468 releasing subsequently newly reserved volumes in doing a close().
469 This should fix bug #1018.
470 kes Fail if attempting to get console input in batch mode. This
471 should help fail RunScript console commands that are incomplete.
472 kes First cut implementing switch_drive() in SD (not actually called).
474 kes Implement first cut running console commands in a RunScript.
476 ebl Fixes bug #1028 where 'Selection Type' option was not usable
478 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
481 Release Version 2.2.7
483 kes Add new free_tls() entry point so that Win32 builds.
484 kes Fix compile warning in src/lib/util.c
485 kes Fix entry point for edit_job_codes() so that Win32 builds.
486 kes Fix seg fault Frank Sweetser reports in regression testing
487 on his systems. The problem was that the original author of
488 bsnprintf.c did not take into account the side effects of
489 using ++x in the argument to a #define.
490 kes Make SD protocol backward compatible with version 2.2.x.
492 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
493 because Bacula no longer restores sockets.
494 ebl Always use ignorecase fileset option on win32 FD.
496 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
497 that implements double quoting include names in conf files,
498 and also allows piping input by having the first character
499 be a vertical bar (|).
500 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
501 that implement %f in RunScripts to pass the FileSet name.
502 kes Skip leading | when lex input comes from a pipe as suggested
503 by Michael Stapelberg <michael@stapelberg.de>.
505 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
506 Nerijus Baliunas <nerijus@users.sourceforge.net>
508 kes Implement Plugin Directory and plugin events.
510 kes Implement a security enhancement: TLS authentication but no
511 encryption. Enabled by setting 'TLS Authentication = yes'.
512 Note when this is on, TLS encryption is turned OFF!
514 kes This patch corrects a problem where the maximum concurrent storage
515 jobs counter gets out of sync during restore jobs causing jobs to
516 'wait on max Storage jobs'. This patch fixes bug #1009.
518 kes This patch fixes bcopy so that it produces correct Volumes.
520 kes This patch eliminates spurious output to the console during a VerifyVolume
521 job that contains encrypted data. It fixes bug #1024.
523 kes This patch prevents the 'status dir' command from trying to use a scratch
524 volume and possibly moving it from one pool to another. This patch fixes
527 kes Add new include to postgresql.c suggested by Marc Cousins so
528 that it compiles correctly with pgre version 8.3.
530 kes Fix --archivedir addition to configure. Replace it with
531 --with-archivedir in configure.in This fixes the regression
533 kes This patch fixes bug #1012 where the job is canceled because
534 of Max Run Time exceeded when the job has not yet started.
536 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
537 one 'part' to write. Instead of each part being stored on disk,
538 written to DVD, then deleted from disk, all parts are written to disk,
539 and only the last is written and deleted from disk.
540 kes This patch fixes the status command to include the formating string for
541 JS_AttrInsterting. It fixes bug #1021.
542 kes This patch should fix the Mac OS X build problem on the latest
543 Darwin, where sys/types.h was not included correctly (apparently
544 due to a change in the Mac headers). The solution was to explicitly
545 ensure that it is defined for the ./configure.
546 This patch also has a rebuild of configure that includes the Debian
547 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
548 kes This patch should ensure that queued messages to the console are
549 displayed as soon as possible. It should fix bug 1007, but has been
550 reported not to work.
552 kes This patch fixes the infinite loop when trying to increase the
553 maximum number of volumes in a Pool during the add command.
554 This patch fixes bug #1008.
556 Release Version 2.2.6
558 db Remove extra data on estimate command in joblist for bat.
560 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
561 really change anything, but is the beginning of doing it *right*.
562 To do it completely right the LastWritten date must be passed to
563 the SD, but it is not yet done.
564 kes Minor tweaks to some bat restore SQL.
565 kes This patch fixes bug #1003 where putting the message output from
566 a Verify job into the catalog results in a recursive loop. The problem
567 seems to show up only with postgresql (to be verified).
568 kes Correct %x to %p in postgresql debug statement.
570 kes Fix bug #942 where lots of emails where generated when the heartbeat
571 interval was low and Bacula wanted a different tape from the one in
574 ebl Add new SD despooling attributes and Dir inserting attributes
575 job status codes in the catalog (Status table).
577 ebl Use qmake-qt4 instead of qmake when available (debian system).
579 kes Add a security warning to src/cats/make_catalog_backup.in indicating
580 that passing the password via the command line (arg 3) is insecure.
581 This responds to bug #990 (it doesn't fix it).
583 kes Set default debug_level to zero. This corrects bugs #991 and #993.
584 kes Fix a crash in bat when it cannot connect to the Director for example
585 if the Director is not running.
586 kes Remove redundant INDEX (JobId) from File table in the trunk.
588 kes Make explicit exception to GPL in LICENSE to permit linking
589 the Win32 FD with Microsoft VSS code.
590 kes Apply the Solaris package patch from
591 Masopust, Christian <christian.masopust@siemens.com>
592 kes Apply the patch to optionally add a timestamp in the debug output
593 submitted by Mariusz Czulada <manieq@wp.eu>.
595 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
596 backend (sql_strerror). Fixes bug #989
598 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
599 It applied with no problems.
600 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
602 kes Redirect stderror to stdin on mt status command in mtx-changer.in
603 since the status is returned on stderr on Solaris.
604 kes Activate Close button on tray-monitor window. This fixes
606 kes Check for NULL item in parse_conf.c before calling it. In the
607 case of Device, there is no item and this caused a seg fault when
608 Device appears in the conf file.
609 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
610 avoids pulling in config.h multiple times in some new code.
612 kes Fix spurious warning message printed when creating a volume with
613 a LabelFormat. This fixes bug #976.
615 Release Version 2.2.5
617 kes Add JobId in place of Job name in all the Jmsg() output.
618 kes Correct the APP_DESC for the Win32 storage service (remove an e).
620 kes Make maxvol-test and new more strict maxvol2-test work.
621 kes Print JobId in all Jmsg() job output.
623 kes Add new SD despooling attributes and Dir inserting attributes
624 job status codes. This fixes bug 961.
625 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
627 kes Fix doc issue. This fixes bug #963.
628 kes Fix listing performance problems in bat. Pointed out by
630 kes Remove old debug code.
631 kes Fix bat code that tests for Win32. This should fix bug #968
632 kes Query 5 list wrong Vol after migration. This fixes bug #960
634 ebl Fix #969 where user can't change Replace option in restore menu.
636 kes Save jcr in thread specific data (tsd) for each thread.
637 kes Make Dmsg() print JobId as -%u.
638 kes Make Jmsg, Emsg, and others automatically pickup the jobid
639 for the thread if it exists.
640 kes Remove old reservation debug jid code.
641 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
642 ebl Add an option that permit to specify spool size in job
643 definition. (Applying patches/testing/spoolsize_per_job.patch).
644 You must upgrade SD and DIR at the same time.
645 dvl Add new configuration item --archivedir
646 dvl Adjust regression tests to use tmp not /tmp. This will allow
647 multiple concurrent runs of the regression tests.
649 kes Fix race condition that drops final block written to volume.
650 This happens in rare cases with multiple simultaneous jobs
651 when the Volume fills. This fixes bug #964. May be related
652 to bug #935 and possibly #903.
653 kes Eliminate more strerror() and replace with bstrerror().
654 kes Remove BSD getopt and replace with unrestricted IBM version.
655 kes Fix Win32 build for changed calling sequences.
656 kes More tweaks to the mount volume routines to get everything
657 right. Changed variable name from find to have_vol, which is
658 much easier to understand.
659 kes Enhance btimer debug code.
661 kes Fix FD->SD authorization failure, which was due to spurious
662 wakeups from a pthread_cond_timedwait(). Simply check the
663 predicate before continuing. This fixes bug #953.
664 kes Add const char where needed (more to do). Remove temp debug code.
666 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
667 kes Don't overwrite error message in check_tables_version.
669 kes Unlock batch insert tables with same calls used elsewhere.
670 kes Allow starting 59 jobs a second.
671 kes Make SD session key more random.
672 kes Add retry for SQLite opening db if it fails. Probably helps
674 kes Suppress extra error messages during batch insert failure.
676 kes Add jcr to timer packets so if killed message can be sent to job.
677 kes Add JobId to all Dmsg() output.
678 kes Put some FD auth code on dbglvl rather than fixed.
679 kes Return insert attributes error message in db msg buffer to avoid
680 false error messages. Helps fix bug #966.
681 kes Separate batch init error messages. Probably helps fix bug #966.
682 kes Make SD code that contructs attribute insert check string lengths
684 kes If Dir gets an error during inserting attributes, cancel SD.
685 This reduces unnecessary error messages.
687 kes Correct search boolean for getting Volume info
688 ebl Cleanup batch insert code. Probably fixes bug #965.
689 kes Back out one small change to the reservation system (reserving a volume).
690 kes Rework how a Volume is mounted. It is now much more intelligent and
691 will always attempt to use any mounted volume if possible and reduces
692 calls to the Director asking about volumes.
694 kes Turn off some code when batch insert not enabled.
695 kes Edit FD name in connect error messages.
696 kes Rework the reservation system to take into account that the Director
697 might give us a Volume that is different from the current one being
698 used, and to ensure that we don't exceed Maximum Volume Jobs.
699 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
700 fatal error with multiple jobs running'
701 kes Add more debug code in reservation system.
702 kes Implement maxvol-test to check bug #947.
704 kes Add code to handle tray monitor separated from Win32 FD.
705 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
707 kes Add missed return in fixing verify bug -- trunk only.
708 ebl Fix a command parser issue causing a director segfault.
709 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
711 kes Increase the max block size to 4MB fixes bug #957.
712 kes ERABT if user sets min block size > max block size. Fixes bug #956.
713 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
714 is not properly mounted (recognized) during a poll.
715 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
716 Job that has differences reports Verify OK.
717 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
719 ebl Add an option to operate on all pools with update vol parameters.
720 This complete the project 20. Patch from Nigel Stepp.
721 ebl Add history support to bconsole when using readline.
722 Using Ctrl-D to exit doesn't update .bconsole_history
723 kes Modify new volume algorithm to use max MediaId for generating next
724 volume number rather than the count of Volumes. This should essentially
725 eliminate the failure rate if some volumes were deleted. Bug #921.
726 kes Begin implemention of Optimize Job Scheduling.
727 kes Implement restore callback that Dirk and I agreed on for bat
728 restore. This fixes bug #928. Restore of backup of zero files fails.
729 kes Fix SQL Catalog logging which broke with new db_escape_string
732 Release Version 2.2.4
734 kes Fix bacula_cats.def for new db_escape_string().
735 kes Increase size of name string when FD making connection to SD.
736 May fix bug #953. FD->SD connection failure.
738 kes Add code to help Dan debug 2drive-incremental-2disk test.
739 kes Add code to try to fix bug #908.
740 kes Add waits to multiple exit detection code to try to force pid
741 file to always be deleted.
742 kes Restore good dev.tar.gz to rescue set appropriate binary property.
744 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
745 trying to switch drives by checking for blocking before unblocking.
747 kes Cancel storage daemon in all cases where FD reports error. This
748 should fix virtually all cases of bug #920.
749 kes Fix db_escape_string() for MySQL which did not compile.
751 kes Fix error message that was clobbered when Dir tells SD it does not
752 have write permission on Volume. This should fix a minor point
753 in bug #942, but not the main problem.
754 kes Add code to cancel job in SD if FD connection fails. This should
756 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
757 dvl Pass jcr and db into db_escape_string() to enable better escaping
759 kes Fix migration code to get correct Volume name with multiple volumes
760 by skipping |. Fixes bug #936.
761 kes Implement patch supplied by Landon to fix bug #944 where using
762 TLS with bconsole uses 99+% of the CPU.
763 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
765 kes Move patches into patches directory.
767 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
770 ebl Using 'm' in bconsole will show messages like before,
771 and not memory usage.
772 kes Fix bug #935, and probably also bug #903 where files were not
773 restored. MediaId was not properly set in JobMedia record after
776 kes Suppress chown and chmod error messages if the FD is not running
779 kes Apply Martin Simmons' patch that should turn off the new API usage
780 when batch insert is turned off allowing building on older
782 kes Add ./configure search in qwt-qt4 for qwt package
784 kes Bacula is now free of 3rd party GPL copyrighted code!
786 kes Add guid_to_name.c/h which replace idcache.
787 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
789 ebl Detect if new PosgreSQL batch insert API is present.
790 kes Correct incorrect mempool call causing Director crash. Occurs on
791 systems without va_copy().
792 sb Update spec files for 2.2.1 release
794 kes Fix memory pool call in ua_output.c. bug #934.
795 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
796 Add test program to fnmatch.c
798 kes Integrate patch to README.vc8 from
799 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
800 edit it to get it into Unix patch format.
801 kes Implement mkpath.c to replace old FSF makepath.c
803 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
805 Release Version 2.2.1
807 kes Update POTFILES.in
808 kes Cleanup a few underquoted AC_DEFUNs in configure
809 kes Apply patch from Martin Simmons that adds a test for va_copy to
812 kes Fix bug #921 by increasing the number of tries to create a new volume
814 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
815 can be called multiple times. Implement a version for machines
816 without va_copy() that gets a big buffer.
818 kes Integrate more portable zone offset code into bsmtp.c
819 Submitted by Attila Fülöp.
821 kes Fix bad SD->FD return status reported by
822 (James Harper) <james.harper@bendigoit.com.au>
823 ebl Fix a bug in read_close_session which return random status
824 thanks to James Harper
826 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
827 and directory names during restore of single file/directories.
828 kes Add sanity checks to .sql command when string is empty. Hopefully
829 that will resolve Dirks Director crash.
831 kes Apply patch submitted by Martin Simmons that corrects a seg fault
832 in the bsmtp chat subroutine when debug is >= 10.
834 kes Fix Director crash when running bat SQL queries.
835 kes Add David's notes on Item 8: Copy pools.
837 kes Rework projects file to be current and ready for a vote.
838 kes Enhance lex scanner error message.
840 kes Tweak LICENSE file to mention BSD code.
841 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
842 if specified on the ./configure.
843 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
844 This class is intended to allow us to open a second bsock to the
845 Director while in the restore subdialog.
847 kes Fix configure to create bat Makefile before creating dependencies.
848 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
849 kes Add a tooltip to the tray monitor.
850 dvl Set the Director's PID file before dropping privs. This fixes
853 kes Update AUTHORs file
854 kes Increase the default max concurrent jobs to 20 in FD and SD to
855 correspond with the default .conf files.
856 kes Rewrite the Win32 service routines. This eliminates the 3 copies
857 some different, of the same file created by RN when porting the
859 kes Rearrange some of the Win32 directories and the placement of the files
861 kes Set DEVELOPER flag in version.h
863 ========================================================================
864 Release Version 2.2.0
866 kes Apply a second doc patch from Marc.
867 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
868 improves the tips section that discusses how to setup multiple
871 kes Update bat README file.
872 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
873 corrects a typo in the Recycle status check in db_find_next_volume().
874 This will probably fix a number of annoying problems with multiple
876 kes Modify most of dird/msgchan.c to use bsock class calls rather than
877 bnet calls -- no functionality change.
879 kes Modify the Verify output to specify if files are missing on
880 the Volume(s) or disk. Fixes confusion in bug #916.
881 kes When more than one Volume is read in a migration job, the last
882 Volume bytes reported are from the last read volume rather than
883 the last written volume. Fixed. This fixes bug #910.
884 kes Fix display of Recycle flag after update volume=foo recycle=yes.
885 It previously printed New Recyle flag is: no. This fixes bug
888 kes Correct seg fault when switching tape drives during restore.
889 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
890 be used until after 2.2.0 release.
892 kes Remove fnmatch() in SD that permitted wild card specifications.
895 kes Fix %g in filename returned by SQL for browse tree reported by
897 kes Fix configure so that it puts config.out in the cwd rather than
899 kes Attempt to fix the locking problem reported by Eric in bug #906.
900 kes Make berrno class to leave errno unchanged after constructor call.
901 kes Make bnet_server use the heap rather than the stack to allocate
902 its socket fd pointers to avoid a crash at termination. Problem
903 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
905 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
906 and putting it in depkgs-qt along with Qt4.3.
908 kes Rework code in acquire.c that switches drives for reading when
909 the Media Type does not match. This should fix bug #906
911 ebl Fix a director segfault during job setup #907
912 kes Correct seg fault in postgresql when first operation returns no
913 rows. Fixes Dirks File browser problem seg fault with bat.
915 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
916 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
919 kes Implement PopUp YES/NO dialog for bat.
921 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
923 kes Correct RunScript to terminate job in FD on failure.
924 kes Change abort_on_error and AbortJobOnError to fail_on_error
925 and FailJobOnError in RunScripts.
926 kes Minor tweaks of code formating in RunScripts, principally to
927 avoid depassing 80 columns.
929 kes Eliminate one #ifdef Win32 in bsmtp
930 kes Implement grow tool to grow a file for testing very large databases.
931 kes Add big-vol-test to test Bacula seeking with > 5GB.
934 kes Modify find_next_volume() to return all values in Media record.
935 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
939 kes Update Release notes
941 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
942 Warning, in previous beta version, all media get from scratch keep their
945 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
946 This should fix bug #842. Made a note to look at removing the temp
947 files at the end of the install.
948 kes Add ability to mount and unmount a file device providing it is
949 marked as being removable and has the appropriate mount and unmount
950 commands defined in the Device resource. This fixes bug #830.
951 kes When applying a storage override, release all previous storage
952 definitions rather than just prepending the new storage.
953 This should prevent a good deal of confusion.
955 kes Implement ./configure search for qwt libraries.
957 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
958 Win32 FD. This should fix bug #893.
959 kes Remove an unnecessary beep in Win32 init code.
960 kes Update copyright dates in Win32 executable about boxes.
961 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
962 code with a BSD getopt.c and getopt.h.
963 kes Remove sched.h from the Win32 compat directory -- not used.
964 kes Remove the Exit menu item from the Win32 tray monitor. If you really
965 need to shut it down, do it through the services panel or the command
967 kes Remove some inappropriate Bacula FSFE copyrights.
968 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
969 kes Fix regress config non-portable test as pointed out by
970 Florian Heigl <florian.heigl@gmail.com>
971 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
972 as pointed out by Florian Heigl <florian.heigl@gmail.com>
974 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
975 Reported by Frank Sweetser.
979 kes Fix client-only build.
980 kes Integrate client-only fixes for bsys (initgroups) and conio from
981 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
982 kes Make arguments to get_scratch_volume() in same order as other
984 kes Rework the prune_volumes() subroutine so that after purging and
985 no volume found in desired pool, it will check for a scratch
986 volume. This prevents recycling the whole scratch pool.
987 kes Add code to status storage to print boffset_t (largefile support).
989 kes Move qwt (Graphics libarary for Qt4) to depkgs.
990 kes You now need a --with-qwt=<dir> to be able to build bat.
991 kes Update src/win32/cats/bacula_cats.def to include the new
992 db_get_query_dbids() call on Win32.
994 kes Correct a problem when selecting a scratch volume and moving
995 it to another pool that lost some columns.
996 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
997 kes Enhance Autochanger error messages to include Volume and device name.
998 kes Rework prune_volumes() code to take account of InChanger flag,
999 and to handle recycling volumes going to the Scratch pool and
1000 current pool because the RecyclePool directive.
1001 kes Implement a better and more efficient db_get_query_dbids() to
1002 handle creating and passing back a list of DBIds.
1006 kes Start work on new more efficient DBId subroutine. First use
1007 will be for recycling volume to Scratch inchanger.
1008 kes Increase number of JobIds in pruning from 1000 to 10000.
1009 This to be replaced by above routine.
1010 kes Begin implementation of building Qt4 on Win32.
1011 kes Correct typo in fix I added for bad TLS shutdown.
1012 kes Pull 2.0.3 patches into patches directory.
1013 kes Update Release notes. Include qt-console in line count.
1014 kes Update Projects file.
1016 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1017 bug in migration code where a job that spanned two volumes
1020 kes Implement new BST_DESPOOLING blocked state. Change from locking
1021 during despooling in SD to blocking. This means that other threads
1022 can work with the device structure, in particular the reservations
1023 system while despooling.
1025 kes Fix return in reservation message queue that missed clearing
1026 the jcr lock (implemented 26Jun07 below).
1027 kes Rename a number of dev methods to make locking function names
1029 kes Document locking in lock.c. Move lock structures to new file
1032 kes Move reservations message lock to lock jcr only this
1034 kes Move main SD locking code into lock.c (new file).
1035 kes Update Win32 build to include lock.c
1039 kes Dirk committed the qwt library code for drawing graphs in bat.
1040 kes Tweak install of qwt so that it is integrated with ./configure.
1042 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1043 out by Eric (my typo).
1044 ebl Fix configure.in to get batch mode enable
1045 kes Return correct string from authenticate.cpp in bat when connecting
1047 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1048 spurious line drops when using TLS.
1049 kes Do not file reparse points when restoring a file that already
1052 kes Implement Windows reparse points -- similar to directories, but
1053 we do not descend into it. This is a first cut. They seem to
1054 be backed up, but restore is not yet tested.
1055 kes Remove restore_blocking in tls code when shutting a socket to leave
1056 it in blocking mode. Hopefully this will fix the encryption bug
1057 reported by Frank Sweetser.
1058 kes When opening a file for backup, tell the OS that we are going to
1059 read it sequentially -- optimization.
1060 kes Change variable names in authenticate_director() to not conflict
1061 with member names in bat. Caused great confusion with compiler,
1064 kes Queue openssl error messages in case of comm problem.
1065 kes Do shutdown() call if socket terminated.
1066 kes Remove some duplicated code in tls.c
1067 kes Move more of the bsock member variables into private and access
1069 kes Add Frank Sweetser's tls-test to the regression suite.
1071 kes Add Swedish sv.po file
1073 kes Don't print clock skew message in FD if less than 3 seconds diff.
1074 kes Add a bit of VSS info to status client.
1075 kes Implement a first cut of Vista VSS, using Win2003 code.
1077 Release: 2.1.20 beta
1079 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1080 loaded tape but uses first drive).
1081 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1082 This was indeed a Win32 issue.
1084 kes Simplify search of autochanger for in-use Volume.
1085 kes Fix exit condition of check for in-use volume. kes Remove
1086 inappropriate my_postgresql_free_result() in db_close()
1088 kes Fix bad return in FD when encryption signature not found.
1089 Probably caused a crash.
1090 kes Inhibit missing encryption signature error messages for
1091 file types where no signature computed.
1092 kes Correct inverted check on autochanger in reservation system.
1093 kes Tweak debug code in autochanger reservation.
1095 kes Add some additional locking in the cats directory in subroutines
1096 that modify packet variables called from batch insert.
1097 kes Rework how dcrs are allocated. new_dcr() can now be called
1098 with an existing pointer, and it will simply clean it up.
1099 This allows the reservation system to test various different
1100 devices, and will permit easy device changes.
1101 kes A bunch of changes all over to handle new new_dcr() calling
1103 kes Work more on the Volume management in the SD. Remember Volumes
1104 for tape drives and for autochangers (even virtual disk changers).
1105 kes When looking at the Volume list to reserve a drive, handle
1106 autochanger names correctly by interating through the changer
1107 devices. Also call the Director to see if a Volume is suitable
1108 for the current job.
1109 kes Fix some bugs in bscan. Make sure all media records are written.
1110 Make sure that valid JobMedia records are written for disk files.
1111 Previously they were completely wrong.
1112 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1113 that the URLs don't change and so that the developers will all
1114 work off the same copy. Rebuild from scrach.
1115 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1117 Release: 2.1.18 beta
1119 kes Fix seg fault in FD from incorrect digest size.
1120 kes Fix argument to non-OpenSSL crypto.c subroutine.
1122 Release: 2.1.16 beta
1124 kes Remove a few malloc()s from the encryption code.
1125 kes Use the class calls to bsock in filed/backup.c and restore.c in
1126 place of the old bnet_xxx code.
1127 kes Implement code that does an on the fly calculation of the
1128 signing digest during restore of encrypted files. It makes
1129 a best guess at the algorithm, and if it is not correct, will
1130 then revert to the old code which reads the file after it is
1132 kes Implement at least one missing crypto stream in stream_to_ascii()
1133 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1134 #877 where a reload with bad syntax causes Dir to exit.
1136 Cut: 2.1.14 beta (not released)
1138 kes Do not free a volume on a tape drive until another volume is
1139 mounted and read, or the autochanger unloads the volume.
1140 This should help the SD re-use volumes that are already mounted,
1141 and should fix bug #886.
1142 kes Apply patch from user brettedgar that allows gnome2-console include
1143 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1144 kes Apply patch from Lucien Weller that fixes day of week calculation
1145 because of DST flag problem. Fixes bug #887.
1147 kes Move find_next_appendable_volume() to after acquiring a valid device
1148 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1150 kes Unable to reproduce bug 872. However added additional testing for
1152 kes Bug #874 resolved by documenting SQLite limitations.
1153 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1154 kes Bug #881 resolved by removing typo in mtx-changer script.
1155 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1156 approval. Added a link to the wiki on the web page, and implemented
1157 a backup from http://paramount.ind.wpi.edu
1159 kes Fix update allfrompool to pass pool name.
1161 kes Convert to pure GPL v2 license.
1162 kes Fix sscanf problems reported by Peter Buschman that caused
1163 a bus error on Solaris.
1164 kes Rework (simplify) the select prompt in bat.
1165 kes Move get_jobid_from_tid() into lib and create a
1167 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1168 should definitely fix the problem of lost error messages in the
1170 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1171 kes Eliminate tcpd.h from the project. Enclose the #include from the
1172 library with extern C ...
1173 kes Add print of signal name when a signal is trapped.
1175 Release: 2.1.12 beta
1177 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1179 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1180 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1181 makes SQLit3 run 30 times faster, though a bit less safe.
1182 kes Implement --with-batch-insert in configure and detection of thread
1183 safe libraries. It is on by default, but turned off if no thread
1184 safe library (e.g. SQLite 2) is available.
1186 kes Fix Bacula PostgreSQL buffer overruns.
1187 kes Do better checking for NULL results returned from PostgreSQL;
1188 implement retry for failed queries; clear results buffer after
1189 failed query. Hopefully this will correct the PostgreSQL failures.
1191 kes Implement algorithm to handle only one appendable volume with
1192 Prefer Mounted Volumes = no.
1193 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1194 returned from a query.
1195 kes Make volume lock recursive.
1196 kes Implement an additional volume reservation algorithm that
1197 starts by considering all reserved volumes then uses the
1198 old brute force algorithm of searching the resources to
1199 find a suitable device.
1200 kes Add new reservations debug code and refine the old code.
1201 kes Update the win32/dll/bacula.defs file.
1203 kes Tweak reservations algorithm to permit a few more cases, i.e.
1204 volume reserved, but on different drive, ...
1205 kes Enhance SD status to include Pool and Media Type for drive in a
1206 more readable format (a bit longer).
1207 kes Fix PostgreSQL double free.
1209 kes Minor refactoring of restore decryption code.
1210 kes Add code to smartall.c to detect double free of a buffer.
1212 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1213 so that bsmtp will create a correct email address (mailbox only).
1214 kes Modify 'memory' command so that the buffers are listed as 'In use'
1215 to avoid confusion with Orphaned buffers.
1216 kes I reworked the OpenSSL include/lib flags to be handled in
1217 the standard Bacula way, which should fix bug #863 concerning
1218 non-standard OpenSSL libraries.
1220 kes Implement Help Browser window for bat.
1221 kes Fix reload bug that reset StorageId to zero.
1223 kes Fix TLS #ifdefing when TLS turned off.
1224 kes Ensure that when labelling a tape with Slot=0 that InChanger
1226 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1228 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1229 add DISTINCT (required by PostgreSQL).
1230 kes Implement BSOCK authenticate_director() method. Eventually will
1231 authenicate all daemons.
1232 kes Move several more functions into the BSOCK class.
1234 kes Add code to tell the OS that we no longer need a cached
1235 file that we were reading. In findlib/bfile.c. Also,
1236 only cache files that we are reading. Thanks to
1237 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1238 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1239 kes Implement script to automatically generate cats and dll .def
1240 files for Win32 dll.
1241 kes Update README.mingw32 to include new .def file generation.
1242 kes Correct typo in UTF-8 error message as reported by:
1243 jhernandez <julianhernandez@gmail.com>
1244 kes Add additional sm_check() code on debug level 1.
1245 kes Set default debug level to 1.
1246 kes Trap SIGABRT in attempt to get traceback.
1248 kes Reduce bat connect timeout from 30 to 15 seconds.
1249 kes More restructuring and implementing BSOCK class in place of
1251 kes Remove a few unnecessary malloc() tests in crypto code.
1252 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1253 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1254 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1256 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1258 kes Fix Verify InitCatalog. The attributes were not pointing to the
1259 correct saved location.
1260 kes Implement message callback so that GUI is sure to get all
1261 daemon messages. Currently displayed in a dialog in bat.
1262 kes Ignore SIGUSR2 (Bacula timer) in bat.
1263 kes Apply regress patch from bug #859 to allow regress to work
1264 with Solaris compiler.
1266 kes Begin adding TLS support to bat.
1267 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1268 clean up lex.c and make it more readable.
1270 kes Move more bnet functions into the BSOCK class.
1271 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1272 kes Complete change of berrno strerror() method to bstrerror()
1274 Release: 2.1.10 beta
1276 kes Cleanup incorrect email addresses in bsmtp.
1277 kes Make bat display initial messages rather than discard them.
1279 kes First cut of adding .mod to the run command.
1280 kes Implement auto display of messages in bat.
1281 kes Enhanced preferences to allow all Bacula output to be
1284 kes Try to make bsmtp date routines more generic.
1285 kes Fixed bug #856 autochanger documentation.
1286 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1287 kes Add new cats entry point so Win32 builds.
1289 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1291 kes Do better checking for the MySQL 64 bit libraries looking for both
1292 .a and .so libraries.
1293 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1294 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1295 kes Require the thread safe version of MySQL during configure. Thanks
1296 to Andre Noll for pointing this out.
1297 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1298 continuing in migration code.
1299 kes Apply implementation of tray-monitor font derived from gnome-console
1300 submitted by Andreas Piesk <a.piesk@gmx.net>
1302 kes Eliminate important memory loss in SQLite
1303 kes Fixed the batch insert MySQL thread specific data that was not
1304 being freed. See cats/mysql.c:db_thread_cleanup().
1305 kes Fix restore before command.
1306 kes Convert old hdr.name to name() in a few places.
1307 kes Implement update jobid command.
1308 kes Return all time_t dates in db_get_job_record()
1309 kes Stop watchdog in SD earlier.
1310 kes Put Pool just after Storage in please mount message.
1311 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1314 kes Update the po files.
1315 kes Fix Verify InitCatalog by making it cache attributes.
1317 kes Change name bacula-bat to bat for man 1 page to correspond to
1319 kes Check for client and store NULL pointers in status command. This
1321 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1322 kes Fix sign extended editing of %p.
1323 kes Clean out a little old #ifdefing in cats/mysql.c
1325 kes If time diff between DIR and FD is more than 600 seconds convert
1326 INFO message to WARNING.
1327 kes Implement heap size display in status for all daemons.
1328 kes Attempt to fix MySQL db open memory loss (not successfull).
1329 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1330 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1331 Query. This looks like a MySQL but but by doing extra releases,
1332 the memory goes away. This should fix bug #847.
1334 kes When backup fails, cancel SD before waiting for sd termination.
1335 kes If SD is waiting for FD to connect during cancel, wake up the
1337 kes Fix fsf code so that errno is correctly reported.
1338 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1340 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1341 so that Bacula doesn't later stumble into a seg fault.
1342 kes Use the term Restore Client in the restore Job report.
1343 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1344 the original job's FileSetId.
1345 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1346 spooling in migration jobs. Not yet tested.
1347 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1348 reading conf file from a pipe. However, do it with open_bpipe()
1349 rather than popen. Not yet tested.
1351 kes Fix an ugly bug where the VolCatBytes were getting updated
1353 kes Implement bconsole memory command that prints current memory
1354 usage, plus smartalloc dump.
1355 kes Clarify some error messages in backup, admin, and migrate.
1356 kes Shrink label dialog to smaller size.
1357 kes Invert Cancel OK buttons on restore to be OK Cancel.
1358 kes More strerror() to bstrerror() conversions.
1360 kes Start implementing bstrerror() in place of strerror().
1361 kes Stripping path -- seems to work.
1363 kes Prevent door and port files from being restored (mostly
1365 kes Free an unreleased buffer in compat code.
1366 kes Change console Job name from *Console* to -Console- to eliminate
1367 Win32 filename problems. Put Win32 path separator when creating
1368 Console file. This fixes bug #846.
1369 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1371 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1373 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1374 to force Win32 error message.
1376 kes First cut strip path. The data should be passed to the FD,
1377 but nothing is done with it yet.
1378 kes Enhance the digest and signature routines in the crypto
1379 library to accept a JCR and to use it to print error messages
1380 so that they will go in the Job report rather than the daemon's
1382 kes Simplify some of the verify signature code.
1383 kes Simplify a few of the alternative returns in the signature
1386 ebl Use only POSIX regex instead of GNU regex in breg.c for
1387 File relocation. It fix broken freebsd compilation.
1388 kes Convert all other Dir files to use new ua class message
1390 kes Tentative fix for missing digest signature in bug 807.
1391 kes Correct handle problem in new win32_ftruncate routine.
1392 kes Convert ua_purge.c and ua_update.c to use new ua class
1393 message routines for bat.
1395 kes Correct incorrect installation of LICENSE in Win32 installer.
1396 kes Display LICENSE at the beginning of the Win32 install.
1397 kes Attempt to correct the need for the png files to be installed
1399 kes Reapply my bat.conf install script in qt-console. I think I
1400 editted bat.pro instead of bat.pro.in and it was lost.
1401 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1402 the /var/lock/subsys for subsysdir. Also corrects typos in the
1405 kes First cut update job.
1406 kes Correct configure to include qmake of src/qt-console directory.
1408 kes Make restore job yes/mod/no print in one command so GUI works.
1409 kes First cut implementing backup and restore client.
1410 kes Correct editing in Verify output that caused a seg fault.
1412 kes Insure that bat.conf is not overwritten during installation.
1413 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1414 while I was implementing migration in March 2006 !
1416 ebl Cleanup file relocation, using char *RegexWhere instead of
1417 char *where + bool where_use_regexp
1418 kes Update some manpages and add bat manpage.
1419 kes Make a first cut at converting bacula.spec.in for bwx-console
1421 kes Apply patch from John Goerzen to add hostname as fourth argument
1422 to make_catalog_backup script.
1423 kes Fix typos I introduced into bsmtp.c
1424 kes Make pm_strxxx() routines handle input of NULL pointer. This
1425 is to protect from NULL pointers returned from SQL databases.
1426 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1427 kes Add more debug to FIFO code -- fix fifo regression test.
1429 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1430 kes Add thread timer to bnet_connect() to break from OS if wait time
1433 kes Update Win32 build to include new files, new symbols, and
1435 kes Implement socket level heartbeat (tcp_keepidle)
1436 ebl Commit File relocation patch
1437 kes Make bat have 'make install' target.
1438 kes Warn during install if old gnome-console binary found.
1439 kes Warn during install if old wx-console binary found.
1440 kes Add -8 option to bsmtp command line to add content type utf-8.
1441 Fixes bug #809. (Character coding problem in bsmtp).
1442 kes If < is found in target (from, to, cc) then do not enclose the
1443 target in < > in bsmtp. Fixes bug #772 (malformed address).
1444 kes When printing certain items in dbcheck, stop after 300000.
1445 Fixes bug #822. (dbcheck loops).
1446 kes Incorrect status in Dir after waiting for mount with poll set.
1449 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1451 kes Print waiting to reserve a device every 5 mins.
1453 kes Don't call close_part in label.c if tape and relabel.
1454 kes Don't free volume if busy in close() -- should help with
1456 ebl Fix #824 RunScript bug (After script could be execute twice)
1457 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1458 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1459 Add a regression script to test RunScript
1461 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1464 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1465 deprecated. No additional bugs will be fixed, and they will be dropped
1466 in a future release (probably 2.4.0).
1467 kes Change name of wx-console to bwx-console to make it more Bacula
1469 kes Change the name of gnome-console to bgnome-console to make it
1472 kes Some time in March, a Feature Request with patch from Jorj Bauer
1473 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1475 The ability for the director to validate a Client (FD) CN against
1476 an arbitrary set of patterns rather than the hostname, with
1477 A new 'TLS Allowed CN' set of directives which are implemented
1478 in the Client resource. Then pattern matching is used in place
1479 of hostname matching against the Certificate's CN. As an example, we
1480 have certificates which (a) use a local CA, and (b) have a CN of the
1482 kes Add new/changed entry points to Win32 build
1483 kes Create unaccepted-projects for projects that are not accepted.
1484 kes Simplify locking in the reservations system.
1485 kes Add more debug code in reservations.
1486 kes Make sure error condition on reserving a volume is handled correctly.
1487 kes Correct handling of volume_in_use.
1488 kes Correct handling of initializing a device.
1489 kes Move handling of broadcasting releasing a device into release_device().
1490 kes Correct attaching dcr to dev so that it is only done if device
1491 is properly initiated.
1493 kes Locking debug level tweaks in SD.
1494 kes Tweak new Volume code.
1496 kes Add exec external-command [wait-seconds] to bconsole. This
1497 executes the external-command. Note! normally external-command
1498 should be enclosed in double quotes.
1499 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1500 it should normally be off in a production system.
1502 kes Implement die command for SD so that we can force it to dump.
1503 kes Implement SD lock debug code.
1504 kes Implement new algorithm for keeping Volume list in SD. It
1505 is now owned by the device.
1507 kes Implement new code for freeing in use volumes that should
1508 resolve if not all, some of the problems of multiple drive
1509 tape conflicts described in bug 801.
1511 kes Fix gui/bacula-web/images files in svn.
1512 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1514 ebl Fix a bug in batch mode (in string escape)
1515 kes Correct migration prune SQL typo that crept in in a
1516 recent 2.1.x change.
1518 kes Move bnet_despool() into class in bsock.c
1519 kes Modify job report to include director name and Build OS.
1520 kes Move drop root privilege and check_catalog() before fork.
1521 kes Add update database scripts (version 9 to 10) to updatedb directory.
1523 ebl Check size and age of each file after its backup to see if
1524 it has changed during backup, if 'checkfilechanges' is set.
1525 The FD will do an extra check (stat(2)) after
1526 each file backup. mtime, ctime and size are compared with
1527 'before backup' information. If time or size mismatch, an
1528 error message will be generated. You must upgrade FD to use it.
1530 kes Make database name and user configurable
1531 --with-db-name=xxx --with-db-user=xxx
1532 kes Add back database type to message.c for debugging.
1534 kes Implement dir_sql() which issues an SQL query.
1535 kes Modify bat medialist to use dir_sql() and do some minor C++
1536 formatting as well as eliminating a number of pointers, simplifing
1539 kes Fix some of the mtx-changer grep commands for tape label readers.
1540 kes Convert a number of bsendmsg into the appropriate send/warning/error
1541 message class calls.
1542 kes Suppress the using database message in the .sql command.
1543 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1545 kes Add context menu for floating a window.
1546 kes Some minor cleanup and name changes in qt-console
1547 kes Add doing mt setblk 0 in Win32 mtx-changer.
1548 kes Apply Martin's bug fix to move definition of ENODATA for
1550 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1551 sqlite2 and sqlite3.
1553 kes More pruning cleanup.
1554 kes Turn on wait_for_drive by default in mtx-changer.
1555 kes Turn on Batch insert code by default as it now passes regression.
1556 kes Add ./configure --enable-bat to enable building of Bat.
1557 No install yet though.
1559 kes Implement a new .sql command for bat.
1560 kes Implement code to turn off pruning in obtaining the next volume.
1561 Pruning is turned off for the status dir command, but turned on
1562 for SD requests and for the list nextvolume command.
1564 kes Correct Qmsg() that was not updated correctly when committing a
1565 previous change (probably the recent TLS patch).
1567 kes Write new subroutine is_volume_purged() that explicitly checks
1568 if the Volume is purged, and if so marks it as such. This should
1569 resolve problems reported about needing to mount twice to recycle
1571 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1572 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1573 amount of duplicated code.
1574 kes Do volume pruning only for the Media Type desired (reduces pruning time
1575 if multiple Media Types are in the same pool).
1576 kes Implement more detailed info in the Job report for the Bacula version
1578 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1580 ebl Add bbatch tool to bench database and insert mode.
1581 Fix sql quote stuff in batch mode
1582 Fix sql stuff for mysql
1584 kes Correct problems with am/pm scheduling. Fixes bug #808.
1585 kes Implement new prunning code that prunes up to 1000 jobs at
1586 the same time. The same technique can be applied to a number
1587 of other prune/purge subroutines.
1588 kes Add an insanity check when starting a new tape job to ensure
1589 that the tape position has not been changed. If so fail the
1591 kes Fix Win32 build for dlls to add the folllowing:
1592 src/lib/bsock.c -- new file with new entry points
1593 src/lib/dlist.c -- new entry points
1594 src/cats/sql_create.c -- new entry point
1595 src/cats/sql_cmds.c -- new DATA item exported
1597 ebl batch mode cleanup bscan-test is ok now.
1598 kes Implement SD code to check length of disk volume before appending.
1600 kes Correct return status on db_batch... routines.
1601 kes Add call to db_write_batch_file_records() to migration code.
1602 ebl Fix AfterJob timing
1603 kes Move the checking of the database in initializion of the Director
1604 to after we drop privileges. This avoids the need for both root
1605 and bacula access to the DB.
1606 kes Correct a misplaced variable definition in src/filed/backup.c
1607 kes Correct how the new batch insert db_create_attributes_record()
1608 uses the arguments. Caused a seg fault in bscan.
1609 kes Implement lock() and unlock() methods in DEVICE class.
1610 Implement block() and set_block(xx) methods in DEVICE class.
1611 kes Modify bnet_connect() so that it uses time() to check for the
1612 wait time expiring (on some OSes, some system calls may not
1613 return immediately).
1614 kes Modify Verify to obtain the previous JobId when it is actually
1615 running rather than at schedule time (as it was in 1.38.x).
1616 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1618 kes When checking pid in pid file, continue running if the pid is
1619 the same as ours. This occurs on IRIX after a system crash.
1622 kes Extend new GUI API.
1623 kes Make the ua structure a class, and implement send_msg(),
1624 error_msg(), warning_msg(), and info_msg().
1626 kes Apply fix from for building wx-console on the Mac from
1628 kes Implement new select mechanism for GUI programs.
1629 kes Reorganize initialization of stackedWidgets in bat.
1631 kes Add updated nagios plugin supplied by Christian Masopust.
1633 kes More bat implementation.
1634 kes File migrate bug with Pool Occupancy using mediaid instead
1635 of jobids. Fixes bug #795.
1636 kes Fix orphaned buffers in filed backup and verify due to
1637 crypto buffers not freed during errors. Fixes bug #789.
1638 kes Extend new GUI api code to tree commands.
1639 kes Ensure that tree and dot commands check console ACLs.
1640 kes Permit marking directory with trailing slash.
1641 kes Allow 20 console connections (instead of only 10).
1643 kes Add smartctl call to bacula-sd.conf as an example of getting
1646 kes Modify jobq.c to let simultaneous restore jobs run. This may
1647 cause them to fail if they cannot get a drive.
1648 kes Add Client Connect Wait to Storage daemon to permit users to
1649 modify the time the SD waits for a FD connection.
1651 kes Correct virtual changer check which was backwards. This caused
1652 volumes to be unloaded into slots already occupied.
1654 kes Apply Command ACL filter to JobId list in restore command.
1655 kes Correct typeo in var.c patch.
1657 kes Don't let Bacula prune File or Job records for the current Job.
1658 kes Fix variable substitution pad + inc bug reported (with patch)
1661 kes Correct SQLite log table index as reported by Luca Berra.
1663 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1665 kes Begin implementing new comm signals for API.
1666 kes Fix a few places in lib/message.c where the open fd may
1668 kes Continue implementing lib/bsock.c (real class). Make jcr,
1669 who, host, and port private. There are new methods to access
1670 them for non-class use. This required touching a number of files.
1672 kes Add LANG=C to autoconf/randpass so it works with languages other
1673 than English. Fixes bug #788.
1675 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1677 You will not be able to generate Include/Exclude list any more.
1678 It will be fixed soon.
1679 If you want to use this, you can apply
1680 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1682 kes Restore of sockets created false error messages because Bacula
1683 no longer restores sockets, but the code was still trying to
1684 set the attributes on a non-existent file. Reported by a user.
1685 ebl finish RecyclePool feature
1686 Media will takes Pool.RecyclePool
1687 when moving from Scratch to a Pool or when user will do
1688 update volume=xxx frompool
1689 To use it, add RecyclePool = aPool to your Pool resource
1692 RecyclePool = Scratch
1696 kes Expand new BSOCK class adding signal() and new BNET signals.
1697 kes Begin enhancing the dot commands adding a new API function
1698 that returns more information and will make it easier
1699 to interface to the Director from a program.
1701 kes Make DEVICE fd private. Its new name is m_fd, and can be
1702 obtained with dev->fd() outside the class. This is the
1703 first of many DEVICE members to be made private.
1704 kes Implement Michael Renner's idea on having a virtual disk
1705 changer. I made some minor modifications (e.g. I did not
1706 implement the Virtual Changer directive, but simply set
1707 the Changer Command to an empty string.
1709 kes Implement a BSOCK send() method that writes the whole record
1710 in a single write() request rather than in two.
1711 ebl add update volume=xxx recyclepool=yyyy
1712 volume takes recyclepool from pool when using update volume=xxx from pool
1714 kes Fix encryption deblocking bug, which caused some restored files
1715 to be truncated. This fixes bug #763.
1716 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1717 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1719 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1720 ebl Use btime_t instead of uint64_t in media patch.
1722 kes Optimize the use of the database a bit in the Status dir command.
1723 Only open it when needed, ensure that if any previous database
1724 was opened, it is closed.
1726 kes Correct VolCatBytes bug from media patch.
1727 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1728 in the case of orphaned records.
1729 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1730 and File records in 300K chunks to be more efficient. This
1731 idea came from Juan Luis Frances (if I remember right).
1732 kes Apply Eric's scratch patch that moves a purged Volume to
1733 the RecyclePool. Question: how is RecyclePool set? what
1734 happens to the ScratchPool?
1735 kes Apply Eric's media patch that collects read/write media
1736 times as well as byte counts. This patch requires a
1737 simultaneous upgrade of the DIR and SD. Note, there
1738 should be some way to turn off timing. I'm not sure
1739 times are in Bacula units.
1740 kes Apply Eric's batch-insert patch.
1742 kes Update projects list.
1744 kes Implement Include/Exclude file lists in FD as dlists using
1745 the new dlistString class. This permits efficiently having
1746 large include/exclude lists and completes project Item 25.
1747 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1748 console is authorized to cancel the job. This fixes bug
1750 kes Modify SD so that the VolCatJobs medium record is updated
1751 at the beginning of a Job rather than the end. This
1752 fixes bug #775 where exceeding MaxVolJobs caused jobs
1754 kes Added a mutex around getting and setting Volume information
1755 so that multiple simultaneous jobs will single thread.
1757 Switch to using Subversion
1758 kes Remove src/pygtk-console/ from configure
1760 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1761 plus the entrypoints.
1762 kes Apply patch supplied that corrects debug print
1763 in canceling jobs for max run time. Supplied as
1764 part of bug #621, which was previously fixed.
1766 kes Test on job_canceled() and sd_msg_thread_done inside
1767 loop starting the message thread to avoid a race condition.
1769 kes Remove rl_catch_signal from console.c as it conflicted
1770 with the header definition. Fixes bug #765.
1771 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1773 kes Clarify some stored/acquire messages to indicate if the
1774 problem is with read or append.
1776 kes Fix memory leak with storage ids in cats/sql_get.c
1777 kes Terminate watchdog earlier to avoid reference to released
1778 memory -- reported by Jason Austin.
1779 kes Move closing the database from jobq.c to the director daemon
1780 termination routine. This fixes memory leaks for shadow jobs
1781 (i.e. migration jobs).
1782 kes Free up the unique jobid chain items in migrate.c. This fixes
1783 a memory leak problem.
1784 kes Convert some ugly looking for statements to use foreach_alist
1785 in findlib/find.c. This will facilitate converting the structures
1786 to use dlist (for large include/exclude lists).
1787 kes Fix a bug in the btree.c and btree.h routines, then rename them
1788 rblist and add them to be built in src/lib. Include some new
1789 methods written by Rudolf Cejka that make the code more readable
1790 (hides some of the ugly casting).
1791 kes Add set_next() and set_prev() methods which make the code much more
1792 readable. Also add a new dlistString class that facilitates storing
1793 strings in dlists. To be used in the large include/exclude lists.
1794 kes Make some trivial modifications to lib/tree.h that use rblist
1795 rather than dlist for storing the tree links. This was suggested
1796 by Rudolf Cejka. The result of this is that the restore tree now
1797 uses red-black binary trees rather than simple linked lists. This
1798 should give rather dramatic speed improvements for directories
1799 contining large numbers of directories/files (more than 10000).
1801 kes Fix maxruntime bug #621.
1803 ebl Implement the include JobID in spool file name project.
1804 kes Reorder projects file in order determined by Jan 2007 vote.
1805 kes Implement item #12 on project list -- quick release of FD by
1807 kes Fix open of SQLite3 db where user does not have write permission
1808 so that DIR does not crash. Fixes bug #761.
1810 kes Add back missing @ in Win32 Makefile.
1811 kes Change 'Device not configured to autolabel' from INFO
1813 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1814 which should restart an indefinite # of times.
1815 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1816 other DIR specifications.
1818 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1819 Fix path quoting in SQLite scripts.
1820 Fix problems with SHGetFolderPath.
1822 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1824 kes Fix Job restart on error bug that promotes an Inc to a Full
1825 backup. This should fix bug #755.
1826 kes Add qt-console and first cut of code.
1830 kes Fix Bacula->Documentation link on Win32 to point to index.html
1831 instead of bacula.html. Fixed bug #750.
1832 kes Return JobId in db_get_job_record() when JobId==0. This should
1834 kes Do not release source pointers when restarting a failed job.
1836 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1837 This *should* fix bug #747.
1838 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1841 kes Modify USTORE constructor to set an empty store_source string,
1842 and don't copy the store_source string in a cancel. Hopefully
1843 this will fix Arno's seg fault, bug #744.
1844 kes Add back code to disable conio in configure. Fixes bug #743.
1845 kes Correct the Options scanner in the FD to correctly handle
1846 SHA1 option, which was eating the next option. Reported by
1848 kes Add code to indicate when the SD is spooling, spool wait, and
1849 despooling as requested by Alan Brown.
1851 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob