1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Fix bat seg fault at termination.
29 kes Add Bacula generated version to bat about box.
32 kes Experiment with allowing multiple read jobs.
33 kes Move final volume swapping code to DCR method and
34 call it from acquire_for_read().
35 kes When wrong volume is mounted during read, unload_autochanger.
37 kes Integrate the libdbi changes from Joao Henrique Freitas
39 kes Stop searching for Volumes in SD askdir if DIR returns the
40 same volume name twice in a row.
41 kes Close bat console windows first to eliminate error message
44 kes Tweak the swap Volume from one drive to another code so that
46 kes Resolve several problems with recycling that broke the new
47 code (these problems are in 2.2.9 as well).
48 kes Remove the volume lock when calling the sysop code.
49 kes Don't mark a reserved volume with no writers as unused otherwise
52 kes Rework class structures for VOLRES, DCR, and DEVICE to make
53 the method names a bit more logical, and for more logically
54 handling the responsibilities.
56 kes Remove redundant code in terminating the scheduler that just
57 causes a seg fault in many cases.
58 kes Cleanup releasing a volume and make it a DCR method.
59 kes Improve algorithm for detecting pre-reserved volume and
62 kes Tweak volume swapping code so it works.
63 kes Correct name overloading in mount.c
64 kes Replace released flag in VOLRES with reserved and add access
65 methods for the VOLRES class.
66 kes Prevent volume from being released while being swapped.
67 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
69 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
71 kes Refactor parts of stored/mount.c
73 ebl Add sanity checks for VolWriteTime and VolReadTime
74 ebl Take care of bad clock changes while computing VolWriteTime
75 and VolReadTime. This should fix or limit #1066
76 kes Correct error string numbers in dird/catreq.c
77 kes Restructure reserving, acquiring, and mounting volumes. Calls to
78 autochanger are deferred for mount.c -- simplifes the code.
80 kes Do not prune any running job. It just fails the job.
81 kes Lock the volumes when changing dev->reserved_device and marking
82 the volume unused otherwise the device can get reserved by
83 another job before the volume is released, thus blocking it.
85 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
86 kes Fix bug #1063, reuse of freed ptr in list nextvol.
87 kes Release regex compile buffer in filed/job.c
88 kes Add proper type of const char in sql_create.c
89 kes Turn off debug in daemon termination routines
90 kes Move free_volume_list() before devices are freed in stored.c
91 kes Fix reference to uninitalized stack variables in bregex.c.
92 This should correct bug #1067.
94 kes Fix possible seg fault in SD when freeing a volume entry.
96 kes Implement unload_dev() before swap device.
97 ebl Add statistics prunning with option and menu
98 kes Separate unload_dev() from unload_other_device() in autochanger.c
100 kes Apply patch from bug #1069 that corrects spurious error messages
101 when ACLs enabled on SGI but no ACL exists.
102 ebl Fix small segfault in bacula-sd when debug level is 500
103 kes Modify run_program() and run_program_full_output() to use
104 call by reference for the results string. This corrects a long
105 standing problem where the address of the string may be changed
106 in the subroutine but not in the calling program.
108 kes Re-enable code to remember last volume mounted on a non-tape
110 kes Add patch supplied in bug #1068 that fixes a SD crash when using
111 a Virtual autochanger.
112 kes Generate correct JobMedia records during spooling/despooling when
113 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
114 <tih@hamartun.priv.no> for excellent analysis and testing.
116 kes Tweak hash algorithm for htable using Martin Simmons idea
117 for doing a circular shift.
118 kes Remember what volume is in VTLs (previously turned off for
120 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
121 pointed out some problems in creating JobMedia records during
122 spooling with concurrent jobs. Fix the problem by updating the
123 start file position before despooling and generate a jobmedia
124 record at the end of despooling.
126 kes Fix handling of JobMedia records during spooling and when a
127 Volume is changed without actually writing data to the Volume.
129 kes Rework certain SD locking based on gdb tracebacks of deadlocks
130 sent by Eric. This code now uses only the volume_lock() rather
131 than the reservations lock when at EOM and acquiring a new
133 kes Ensure only one exit point in several subroutines.
135 kes Implement bsock code to permit locking. Use the new code in Verify
136 in the FD to prevent the heartbeat thread from disrupting the Verify
137 data sent to the Dir.
138 kes Modify SD locking to eliminate locking the reservations system from
139 outside the system. Use the volume lock when getting media data
140 and reserving a new volume at end of media.
141 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
142 when SD starts are not locked into place.
144 kes Fix error compiling runscript code on 64 bit machines.
145 kes Tweak Win32 mount point code.
146 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
147 cleared giving bad file estimate).
148 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
151 kes Keep Schedule run lists in order as suggested by
154 kes Implement autostart scripts for Debian.
155 ebl Implement upgrade catalog scripts.
157 ebl Apply jobstat patch for long term statistics. Have to implement
158 purge stats command and upgrade scripts.
159 kes Fix mtx-changer.in for broken Debian mt program.
161 kes Fix large number of JobMedia records reported by Eric Bollengier.
163 kes Apply doc fix from bug #1062.
164 kes Resolve crash and improper restore wx-console Win32 restore
165 GUI. Fixes bug #1065.
166 kes Update Win32 wxWidgets to latest version.
167 kes Attempt to do correct handling of Win32 mount points. Should
169 kes Fix Win32 FD backup/restore memory leak due to improper termination
170 of BackupRead/Write. This fixes bug# 1038.
172 ebl Reduce memory usage for accurate backup, working only with ctime
173 and mtime. (not all Lstat field)
174 About 40MB for my linux system (400.000 files)
176 kes Add dcr->reserved_volume flag that allows us to release a volume
177 even if it is not vol->released. This allows maxvol2 to work when
178 Volumes expire and we are already writing to the device (i.e. a
179 volume is pulled out from under us by another job terminating after
180 we reserve the drive).
182 ebl Permit multiple command/console per runscript definition.
183 RunScript { command = /bin/true ; command = /bin/false ... }
184 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
185 (restart an application) just after the VSS snapshot on windows.
186 kes Don't zap dcr values during release_volume() as they might
187 have the next Volume to be mounted.
188 kes Fix AIX prototype.
190 kes Second cut of drive switching during backup.
193 kes Update Win32 version of wxWidgets to most recent version.
194 kes Tweak Copy job details.
195 kes Rework dir_find_next_appendable_volume to make a bit more effort
196 to find a suitable volume before giving up.
198 kes Make ask_sysop_to_create... to return if waken from wait.
199 This helps get out of blocked conditions.
200 kes Experimental implementation of switch_device in reservations.
201 kes Implement FD version to allow easier protocol changes.
202 kes Add Plugin Options string -- not yet passed to FD.
203 kes Implement PluginOptions ACL.
205 kes Attempt to correct problems with restores with autochangers and
206 use counts going negative
207 kes Rework SD status command and implement API for bat. Implements
208 header, runing waitreservation, devices, volumes, spooling,
209 and terminated status keywords.
210 .status storage=xxx <keyword>
211 kes Clarify TLS error message by adding double quotes around name.
212 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
213 kes Pass jcr to tls routines so debug messages can be handled better.
214 kes Rework jobq resource allocation code, and possibly fix a bug
215 that caused reference counts to get out of sync.
217 kes Rename fd/dir plugin to use Bacula standard underscore.
218 kes Plugin work -- bring dir up to fd level.
219 kes Start implementation of VTL code
220 kes Fix Win32 build after adding new cats subroutine.
222 kes First cut at Duplicate Job implementation.
224 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
225 kes Start PluginOptions string, and refactor a bit of ua_run.c
226 ebl Apply Allan patch that permit to reset recyclepool.
228 kes Test patch -- possible fix or improvement for bug #1053
229 kes Refactor FD and SD status commands to permit new API code in
230 SD, and to fix Win32 build.
231 kes Win32 build is now working.
233 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
234 some ideas in patch from Scott Bailey.
235 kes Begin implementation of duplicate Job control.
236 kes Fix some of Win32 build after recent additions.
237 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
238 which causes the FD to detect whether or not the OS has the
239 honor no dump bit (*BSD systems), and if so, to skip backing up
240 any file with this bit set. The feature is enabled by setting
241 'honor no dump flag = yes' in the Options section of a FileSet.
243 kes Correct po warning message with datarootdir
244 kes Implement more code in dird.c to put configuration parsing in
245 a class rather than use globals.
246 kes Restructure SD status command for implementation of bat API
249 kes Suppress incorrect 'Will not descend from x into y' messages.
250 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
251 daemon globals used by parser.
252 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
254 kes Fix free of plugin_list when none exists.
256 ebl Apply accurate project patch.
258 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
259 on non-mempool object)
260 kes First cut of converting FD .status to work with bat API.
262 .status client=XXX header
263 .status client=XXX running
264 .status client=XXX terminated
265 kes Implement first cut of Copy Job.
266 kes Implement Catalog in Pool resource. It overrides catalog specified
267 in the Client resource.
269 kes Apply patch (with some difficulties) from Joao Henrique Freitas
270 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
272 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
273 ftruncate() actually works. In the case of some (cheap) NAS devices,
274 it does not, and so recycling NAS Volumes does not work. The code
275 simply unlink()s the file, then recreates it. This fixes bug #1011.
277 kes First incomplete cut of big malloc blocks for htable.
278 kes Tweak plugin code.
280 kes Plugin debug code + tweak a couple bat dialog layouts
282 kes Fix creating first JobMedia record during Migration to include
283 proper index. This caused slow restores of migrated jobs.
284 kes Temp fix to plugin name file_index.
285 kes Bacula backed up and restored a MySQL database.
287 kes Implement plugin restore.
288 kes Implement parsing of db_driver to give db_type index.
290 kes First cut of plugin restore code.
291 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
292 and do not strip paths on symbolic links.
293 kes Set catalog backup database and user name from values specified on
294 the ./configure line.
295 ebl Fix #1031 about wrong pool source information in job report.
298 kes Remove a redundant jcr argument to find_files, match_files, and
300 kes Implement '.status dir header|scheduled|running|terminated' that
301 prints the requested status section. With the exception of the
302 header, the other reports have fields separated by tabs (\t).
304 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
305 a resource embedded run command to find a since time if no explicit
306 since time was supplied on the command line.
307 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
308 that updates the state file at job termination time in addition to
309 when the daemon terminates.
311 kes First version where a plugin did a backup.
312 bpipe-fd.so created a backup file, wrote a test
313 string to it, and Bacua could restore this fabricated file.
315 kes Implement DB Driver = string for the DBI driver.
316 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
317 kes First cut of code for loading Win32 plugin dlls. Implement
318 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
319 and implement a dlfcn.h file based on opengroup's definitions of
322 kes First cut plugin directives.
324 kes Apply patch from bug #1049 to prevent stripping the path on a
326 kes Attempt to fix bug #1047 where stripping a path corrupts the
327 heap. Waiting for feedback.
328 kes Correct the Mount message not to suggest labeling a new tape
329 when doing a restore. Submitted by email by John Stoffel.
330 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
331 FD by using casting. Reported in bug #1042.
333 kes A bit of crypto cleanup. More later.
335 Release Version 2.2.8
337 kes Apply patch from Martin to correct bug #1040, bscan sets existing
339 kes Fixed important spelling error in doc -- bug #1045.
341 ebl Fix bextract to be able to extract non-portable Win32 data to
343 kes Move initialization of read/write res lock earlier in the code.
344 This fixes the crash with a null conf file. This fixes bug
346 kes Redefine CURES in lib/parse_conf to be URES and move it all
347 into lib/parse_conf.c -- this responds to bug #1042, but does
348 not fix it. The fix is not to compile with FORTIFY_SOURCE.
349 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
350 the trunk SVN. I don't think this was reported as a bug.
352 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
354 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
356 kes Add DataDespooling and DataCommitting status (committing is
357 the last despooling).
358 kes Finish implementation of new reservations code noted below.
360 kes Fix bsnprintf for float point numbers. I broke recently when
361 parameterizing some variables. This fixes bug #1036.
362 kes Undo recent reservations changes ... will apply them later
363 when they work better.
365 ebl Fixes #1034 which cause mysql to hang the connection after 8h
366 ebl Change default statistics target of filename.name and path.path
367 fields for PostgreSQL. This speeds lookup by indexes. Thanks
369 kes A few more tweaks to new reservation code. Make sure to clear
370 vol released flag when retaking volume. When reading label and
371 label is bad mark volume unused. When recycling, mark volume
372 unused so it can be renamed.
374 kes Fix reserve_volume() so it doesn't release a volume in use
375 (i.e. a volume entry not marked released). This should be
376 the last part needed to fix bug #1018.
378 kes Move Heartbeat documentation from Job to Director resource.
379 This fixes bug #1033.
381 kes Fix existing switch drive SD code to call autochanger to release
382 any old volume. This must be done to keep the autochanger from
383 releasing subsequently newly reserved volumes in doing a close().
384 This should fix bug #1018.
385 kes Fail if attempting to get console input in batch mode. This
386 should help fail RunScript console commands that are incomplete.
387 kes First cut implementing switch_drive() in SD (not actually called).
389 kes Implement first cut running console commands in a RunScript.
391 ebl Fixes bug #1028 where 'Selection Type' option was not usable
393 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
396 Release Version 2.2.7
398 kes Add new free_tls() entry point so that Win32 builds.
399 kes Fix compile warning in src/lib/util.c
400 kes Fix entry point for edit_job_codes() so that Win32 builds.
401 kes Fix seg fault Frank Sweetser reports in regression testing
402 on his systems. The problem was that the original author of
403 bsnprintf.c did not take into account the side effects of
404 using ++x in the argument to a #define.
405 kes Make SD protocol backward compatible with version 2.2.x.
407 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
408 because Bacula no longer restores sockets.
409 ebl Always use ignorecase fileset option on win32 FD.
411 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
412 that implements double quoting include names in conf files,
413 and also allows piping input by having the first character
414 be a vertical bar (|).
415 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
416 that implement %f in RunScripts to pass the FileSet name.
417 kes Skip leading | when lex input comes from a pipe as suggested
418 by Michael Stapelberg <michael@stapelberg.de>.
420 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
421 Nerijus Baliunas <nerijus@users.sourceforge.net>
423 kes Implement Plugin Directory and plugin events.
425 kes Implement a security enhancement: TLS authentication but no
426 encryption. Enabled by setting 'TLS Authentication = yes'.
427 Note when this is on, TLS encryption is turned OFF!
429 kes This patch corrects a problem where the maximum concurrent storage
430 jobs counter gets out of sync during restore jobs causing jobs to
431 'wait on max Storage jobs'. This patch fixes bug #1009.
433 kes This patch fixes bcopy so that it produces correct Volumes.
435 kes This patch eliminates spurious output to the console during a VerifyVolume
436 job that contains encrypted data. It fixes bug #1024.
438 kes This patch prevents the 'status dir' command from trying to use a scratch
439 volume and possibly moving it from one pool to another. This patch fixes
442 kes Add new include to postgresql.c suggested by Marc Cousins so
443 that it compiles correctly with pgre version 8.3.
445 kes Fix --archivedir addition to configure. Replace it with
446 --with-archivedir in configure.in This fixes the regression
448 kes This patch fixes bug #1012 where the job is canceled because
449 of Max Run Time exceeded when the job has not yet started.
451 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
452 one 'part' to write. Instead of each part being stored on disk,
453 written to DVD, then deleted from disk, all parts are written to disk,
454 and only the last is written and deleted from disk.
455 kes This patch fixes the status command to include the formating string for
456 JS_AttrInsterting. It fixes bug #1021.
457 kes This patch should fix the Mac OS X build problem on the latest
458 Darwin, where sys/types.h was not included correctly (apparently
459 due to a change in the Mac headers). The solution was to explicitly
460 ensure that it is defined for the ./configure.
461 This patch also has a rebuild of configure that includes the Debian
462 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
463 kes This patch should ensure that queued messages to the console are
464 displayed as soon as possible. It should fix bug 1007, but has been
465 reported not to work.
467 kes This patch fixes the infinite loop when trying to increase the
468 maximum number of volumes in a Pool during the add command.
469 This patch fixes bug #1008.
471 Release Version 2.2.6
473 db Remove extra data on estimate command in joblist for bat.
475 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
476 really change anything, but is the beginning of doing it *right*.
477 To do it completely right the LastWritten date must be passed to
478 the SD, but it is not yet done.
479 kes Minor tweaks to some bat restore SQL.
480 kes This patch fixes bug #1003 where putting the message output from
481 a Verify job into the catalog results in a recursive loop. The problem
482 seems to show up only with postgresql (to be verified).
483 kes Correct %x to %p in postgresql debug statement.
485 kes Fix bug #942 where lots of emails where generated when the heartbeat
486 interval was low and Bacula wanted a different tape from the one in
489 ebl Add new SD despooling attributes and Dir inserting attributes
490 job status codes in the catalog (Status table).
492 ebl Use qmake-qt4 instead of qmake when available (debian system).
494 kes Add a security warning to src/cats/make_catalog_backup.in indicating
495 that passing the password via the command line (arg 3) is insecure.
496 This responds to bug #990 (it doesn't fix it).
498 kes Set default debug_level to zero. This corrects bugs #991 and #993.
499 kes Fix a crash in bat when it cannot connect to the Director for example
500 if the Director is not running.
501 kes Remove redundant INDEX (JobId) from File table in the trunk.
503 kes Make explicit exception to GPL in LICENSE to permit linking
504 the Win32 FD with Microsoft VSS code.
505 kes Apply the Solaris package patch from
506 Masopust, Christian <christian.masopust@siemens.com>
507 kes Apply the patch to optionally add a timestamp in the debug output
508 submitted by Mariusz Czulada <manieq@wp.eu>.
510 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
511 backend (sql_strerror). Fixes bug #989
513 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
514 It applied with no problems.
515 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
517 kes Redirect stderror to stdin on mt status command in mtx-changer.in
518 since the status is returned on stderr on Solaris.
519 kes Activate Close button on tray-monitor window. This fixes
521 kes Check for NULL item in parse_conf.c before calling it. In the
522 case of Device, there is no item and this caused a seg fault when
523 Device appears in the conf file.
524 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
525 avoids pulling in config.h multiple times in some new code.
527 kes Fix spurious warning message printed when creating a volume with
528 a LabelFormat. This fixes bug #976.
530 Release Version 2.2.5
532 kes Add JobId in place of Job name in all the Jmsg() output.
533 kes Correct the APP_DESC for the Win32 storage service (remove an e).
535 kes Make maxvol-test and new more strict maxvol2-test work.
536 kes Print JobId in all Jmsg() job output.
538 kes Add new SD despooling attributes and Dir inserting attributes
539 job status codes. This fixes bug 961.
540 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
542 kes Fix doc issue. This fixes bug #963.
543 kes Fix listing performance problems in bat. Pointed out by
545 kes Remove old debug code.
546 kes Fix bat code that tests for Win32. This should fix bug #968
547 kes Query 5 list wrong Vol after migration. This fixes bug #960
549 ebl Fix #969 where user can't change Replace option in restore menu.
551 kes Save jcr in thread specific data (tsd) for each thread.
552 kes Make Dmsg() print JobId as -%u.
553 kes Make Jmsg, Emsg, and others automatically pickup the jobid
554 for the thread if it exists.
555 kes Remove old reservation debug jid code.
556 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
557 ebl Add an option that permit to specify spool size in job
558 definition. (Applying patches/testing/spoolsize_per_job.patch).
559 You must upgrade SD and DIR at the same time.
560 dvl Add new configuration item --archivedir
561 dvl Adjust regression tests to use tmp not /tmp. This will allow
562 multiple concurrent runs of the regression tests.
564 kes Fix race condition that drops final block written to volume.
565 This happens in rare cases with multiple simultaneous jobs
566 when the Volume fills. This fixes bug #964. May be related
567 to bug #935 and possibly #903.
568 kes Eliminate more strerror() and replace with bstrerror().
569 kes Remove BSD getopt and replace with unrestricted IBM version.
570 kes Fix Win32 build for changed calling sequences.
571 kes More tweaks to the mount volume routines to get everything
572 right. Changed variable name from find to have_vol, which is
573 much easier to understand.
574 kes Enhance btimer debug code.
576 kes Fix FD->SD authorization failure, which was due to spurious
577 wakeups from a pthread_cond_timedwait(). Simply check the
578 predicate before continuing. This fixes bug #953.
579 kes Add const char where needed (more to do). Remove temp debug code.
581 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
582 kes Don't overwrite error message in check_tables_version.
584 kes Unlock batch insert tables with same calls used elsewhere.
585 kes Allow starting 59 jobs a second.
586 kes Make SD session key more random.
587 kes Add retry for SQLite opening db if it fails. Probably helps
589 kes Suppress extra error messages during batch insert failure.
591 kes Add jcr to timer packets so if killed message can be sent to job.
592 kes Add JobId to all Dmsg() output.
593 kes Put some FD auth code on dbglvl rather than fixed.
594 kes Return insert attributes error message in db msg buffer to avoid
595 false error messages. Helps fix bug #966.
596 kes Separate batch init error messages. Probably helps fix bug #966.
597 kes Make SD code that contructs attribute insert check string lengths
599 kes If Dir gets an error during inserting attributes, cancel SD.
600 This reduces unnecessary error messages.
602 kes Correct search boolean for getting Volume info
603 ebl Cleanup batch insert code. Probably fixes bug #965.
604 kes Back out one small change to the reservation system (reserving a volume).
605 kes Rework how a Volume is mounted. It is now much more intelligent and
606 will always attempt to use any mounted volume if possible and reduces
607 calls to the Director asking about volumes.
609 kes Turn off some code when batch insert not enabled.
610 kes Edit FD name in connect error messages.
611 kes Rework the reservation system to take into account that the Director
612 might give us a Volume that is different from the current one being
613 used, and to ensure that we don't exceed Maximum Volume Jobs.
614 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
615 fatal error with multiple jobs running'
616 kes Add more debug code in reservation system.
617 kes Implement maxvol-test to check bug #947.
619 kes Add code to handle tray monitor separated from Win32 FD.
620 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
622 kes Add missed return in fixing verify bug -- trunk only.
623 ebl Fix a command parser issue causing a director segfault.
624 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
626 kes Increase the max block size to 4MB fixes bug #957.
627 kes ERABT if user sets min block size > max block size. Fixes bug #956.
628 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
629 is not properly mounted (recognized) during a poll.
630 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
631 Job that has differences reports Verify OK.
632 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
634 ebl Add an option to operate on all pools with update vol parameters.
635 This complete the project 20. Patch from Nigel Stepp.
636 ebl Add history support to bconsole when using readline.
637 Using Ctrl-D to exit doesn't update .bconsole_history
638 kes Modify new volume algorithm to use max MediaId for generating next
639 volume number rather than the count of Volumes. This should essentially
640 eliminate the failure rate if some volumes were deleted. Bug #921.
641 kes Begin implemention of Optimize Job Scheduling.
642 kes Implement restore callback that Dirk and I agreed on for bat
643 restore. This fixes bug #928. Restore of backup of zero files fails.
644 kes Fix SQL Catalog logging which broke with new db_escape_string
647 Release Version 2.2.4
649 kes Fix bacula_cats.def for new db_escape_string().
650 kes Increase size of name string when FD making connection to SD.
651 May fix bug #953. FD->SD connection failure.
653 kes Add code to help Dan debug 2drive-incremental-2disk test.
654 kes Add code to try to fix bug #908.
655 kes Add waits to multiple exit detection code to try to force pid
656 file to always be deleted.
657 kes Restore good dev.tar.gz to rescue set appropriate binary property.
659 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
660 trying to switch drives by checking for blocking before unblocking.
662 kes Cancel storage daemon in all cases where FD reports error. This
663 should fix virtually all cases of bug #920.
664 kes Fix db_escape_string() for MySQL which did not compile.
666 kes Fix error message that was clobbered when Dir tells SD it does not
667 have write permission on Volume. This should fix a minor point
668 in bug #942, but not the main problem.
669 kes Add code to cancel job in SD if FD connection fails. This should
671 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
672 dvl Pass jcr and db into db_escape_string() to enable better escaping
674 kes Fix migration code to get correct Volume name with multiple volumes
675 by skipping |. Fixes bug #936.
676 kes Implement patch supplied by Landon to fix bug #944 where using
677 TLS with bconsole uses 99+% of the CPU.
678 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
680 kes Move patches into patches directory.
682 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
685 ebl Using 'm' in bconsole will show messages like before,
686 and not memory usage.
687 kes Fix bug #935, and probably also bug #903 where files were not
688 restored. MediaId was not properly set in JobMedia record after
691 kes Suppress chown and chmod error messages if the FD is not running
694 kes Apply Martin Simmons' patch that should turn off the new API usage
695 when batch insert is turned off allowing building on older
697 kes Add ./configure search in qwt-qt4 for qwt package
699 kes Bacula is now free of 3rd party GPL copyrighted code!
701 kes Add guid_to_name.c/h which replace idcache.
702 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
704 ebl Detect if new PosgreSQL batch insert API is present.
705 kes Correct incorrect mempool call causing Director crash. Occurs on
706 systems without va_copy().
707 sb Update spec files for 2.2.1 release
709 kes Fix memory pool call in ua_output.c. bug #934.
710 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
711 Add test program to fnmatch.c
713 kes Integrate patch to README.vc8 from
714 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
715 edit it to get it into Unix patch format.
716 kes Implement mkpath.c to replace old FSF makepath.c
718 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
720 Release Version 2.2.1
722 kes Update POTFILES.in
723 kes Cleanup a few underquoted AC_DEFUNs in configure
724 kes Apply patch from Martin Simmons that adds a test for va_copy to
727 kes Fix bug #921 by increasing the number of tries to create a new volume
729 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
730 can be called multiple times. Implement a version for machines
731 without va_copy() that gets a big buffer.
733 kes Integrate more portable zone offset code into bsmtp.c
734 Submitted by Attila Fülöp.
736 kes Fix bad SD->FD return status reported by
737 (James Harper) <james.harper@bendigoit.com.au>
738 ebl Fix a bug in read_close_session which return random status
739 thanks to James Harper
741 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
742 and directory names during restore of single file/directories.
743 kes Add sanity checks to .sql command when string is empty. Hopefully
744 that will resolve Dirks Director crash.
746 kes Apply patch submitted by Martin Simmons that corrects a seg fault
747 in the bsmtp chat subroutine when debug is >= 10.
749 kes Fix Director crash when running bat SQL queries.
750 kes Add David's notes on Item 8: Copy pools.
752 kes Rework projects file to be current and ready for a vote.
753 kes Enhance lex scanner error message.
755 kes Tweak LICENSE file to mention BSD code.
756 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
757 if specified on the ./configure.
758 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
759 This class is intended to allow us to open a second bsock to the
760 Director while in the restore subdialog.
762 kes Fix configure to create bat Makefile before creating dependencies.
763 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
764 kes Add a tooltip to the tray monitor.
765 dvl Set the Director's PID file before dropping privs. This fixes
768 kes Update AUTHORs file
769 kes Increase the default max concurrent jobs to 20 in FD and SD to
770 correspond with the default .conf files.
771 kes Rewrite the Win32 service routines. This eliminates the 3 copies
772 some different, of the same file created by RN when porting the
774 kes Rearrange some of the Win32 directories and the placement of the files
776 kes Set DEVELOPER flag in version.h
778 ========================================================================
779 Release Version 2.2.0
781 kes Apply a second doc patch from Marc.
782 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
783 improves the tips section that discusses how to setup multiple
786 kes Update bat README file.
787 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
788 corrects a typo in the Recycle status check in db_find_next_volume().
789 This will probably fix a number of annoying problems with multiple
791 kes Modify most of dird/msgchan.c to use bsock class calls rather than
792 bnet calls -- no functionality change.
794 kes Modify the Verify output to specify if files are missing on
795 the Volume(s) or disk. Fixes confusion in bug #916.
796 kes When more than one Volume is read in a migration job, the last
797 Volume bytes reported are from the last read volume rather than
798 the last written volume. Fixed. This fixes bug #910.
799 kes Fix display of Recycle flag after update volume=foo recycle=yes.
800 It previously printed New Recyle flag is: no. This fixes bug
803 kes Correct seg fault when switching tape drives during restore.
804 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
805 be used until after 2.2.0 release.
807 kes Remove fnmatch() in SD that permitted wild card specifications.
810 kes Fix %g in filename returned by SQL for browse tree reported by
812 kes Fix configure so that it puts config.out in the cwd rather than
814 kes Attempt to fix the locking problem reported by Eric in bug #906.
815 kes Make berrno class to leave errno unchanged after constructor call.
816 kes Make bnet_server use the heap rather than the stack to allocate
817 its socket fd pointers to avoid a crash at termination. Problem
818 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
820 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
821 and putting it in depkgs-qt along with Qt4.3.
823 kes Rework code in acquire.c that switches drives for reading when
824 the Media Type does not match. This should fix bug #906
826 ebl Fix a director segfault during job setup #907
827 kes Correct seg fault in postgresql when first operation returns no
828 rows. Fixes Dirks File browser problem seg fault with bat.
830 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
831 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
834 kes Implement PopUp YES/NO dialog for bat.
836 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
838 kes Correct RunScript to terminate job in FD on failure.
839 kes Change abort_on_error and AbortJobOnError to fail_on_error
840 and FailJobOnError in RunScripts.
841 kes Minor tweaks of code formating in RunScripts, principally to
842 avoid depassing 80 columns.
844 kes Eliminate one #ifdef Win32 in bsmtp
845 kes Implement grow tool to grow a file for testing very large databases.
846 kes Add big-vol-test to test Bacula seeking with > 5GB.
849 kes Modify find_next_volume() to return all values in Media record.
850 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
854 kes Update Release notes
856 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
857 Warning, in previous beta version, all media get from scratch keep their
860 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
861 This should fix bug #842. Made a note to look at removing the temp
862 files at the end of the install.
863 kes Add ability to mount and unmount a file device providing it is
864 marked as being removable and has the appropriate mount and unmount
865 commands defined in the Device resource. This fixes bug #830.
866 kes When applying a storage override, release all previous storage
867 definitions rather than just prepending the new storage.
868 This should prevent a good deal of confusion.
870 kes Implement ./configure search for qwt libraries.
872 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
873 Win32 FD. This should fix bug #893.
874 kes Remove an unnecessary beep in Win32 init code.
875 kes Update copyright dates in Win32 executable about boxes.
876 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
877 code with a BSD getopt.c and getopt.h.
878 kes Remove sched.h from the Win32 compat directory -- not used.
879 kes Remove the Exit menu item from the Win32 tray monitor. If you really
880 need to shut it down, do it through the services panel or the command
882 kes Remove some inappropriate Bacula FSFE copyrights.
883 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
884 kes Fix regress config non-portable test as pointed out by
885 Florian Heigl <florian.heigl@gmail.com>
886 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
887 as pointed out by Florian Heigl <florian.heigl@gmail.com>
889 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
890 Reported by Frank Sweetser.
894 kes Fix client-only build.
895 kes Integrate client-only fixes for bsys (initgroups) and conio from
896 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
897 kes Make arguments to get_scratch_volume() in same order as other
899 kes Rework the prune_volumes() subroutine so that after purging and
900 no volume found in desired pool, it will check for a scratch
901 volume. This prevents recycling the whole scratch pool.
902 kes Add code to status storage to print boffset_t (largefile support).
904 kes Move qwt (Graphics libarary for Qt4) to depkgs.
905 kes You now need a --with-qwt=<dir> to be able to build bat.
906 kes Update src/win32/cats/bacula_cats.def to include the new
907 db_get_query_dbids() call on Win32.
909 kes Correct a problem when selecting a scratch volume and moving
910 it to another pool that lost some columns.
911 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
912 kes Enhance Autochanger error messages to include Volume and device name.
913 kes Rework prune_volumes() code to take account of InChanger flag,
914 and to handle recycling volumes going to the Scratch pool and
915 current pool because the RecyclePool directive.
916 kes Implement a better and more efficient db_get_query_dbids() to
917 handle creating and passing back a list of DBIds.
921 kes Start work on new more efficient DBId subroutine. First use
922 will be for recycling volume to Scratch inchanger.
923 kes Increase number of JobIds in pruning from 1000 to 10000.
924 This to be replaced by above routine.
925 kes Begin implementation of building Qt4 on Win32.
926 kes Correct typo in fix I added for bad TLS shutdown.
927 kes Pull 2.0.3 patches into patches directory.
928 kes Update Release notes. Include qt-console in line count.
929 kes Update Projects file.
931 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
932 bug in migration code where a job that spanned two volumes
935 kes Implement new BST_DESPOOLING blocked state. Change from locking
936 during despooling in SD to blocking. This means that other threads
937 can work with the device structure, in particular the reservations
938 system while despooling.
940 kes Fix return in reservation message queue that missed clearing
941 the jcr lock (implemented 26Jun07 below).
942 kes Rename a number of dev methods to make locking function names
944 kes Document locking in lock.c. Move lock structures to new file
947 kes Move reservations message lock to lock jcr only this
949 kes Move main SD locking code into lock.c (new file).
950 kes Update Win32 build to include lock.c
954 kes Dirk committed the qwt library code for drawing graphs in bat.
955 kes Tweak install of qwt so that it is integrated with ./configure.
957 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
958 out by Eric (my typo).
959 ebl Fix configure.in to get batch mode enable
960 kes Return correct string from authenticate.cpp in bat when connecting
962 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
963 spurious line drops when using TLS.
964 kes Do not file reparse points when restoring a file that already
967 kes Implement Windows reparse points -- similar to directories, but
968 we do not descend into it. This is a first cut. They seem to
969 be backed up, but restore is not yet tested.
970 kes Remove restore_blocking in tls code when shutting a socket to leave
971 it in blocking mode. Hopefully this will fix the encryption bug
972 reported by Frank Sweetser.
973 kes When opening a file for backup, tell the OS that we are going to
974 read it sequentially -- optimization.
975 kes Change variable names in authenticate_director() to not conflict
976 with member names in bat. Caused great confusion with compiler,
979 kes Queue openssl error messages in case of comm problem.
980 kes Do shutdown() call if socket terminated.
981 kes Remove some duplicated code in tls.c
982 kes Move more of the bsock member variables into private and access
984 kes Add Frank Sweetser's tls-test to the regression suite.
986 kes Add Swedish sv.po file
988 kes Don't print clock skew message in FD if less than 3 seconds diff.
989 kes Add a bit of VSS info to status client.
990 kes Implement a first cut of Vista VSS, using Win2003 code.
994 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
995 loaded tape but uses first drive).
996 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
997 This was indeed a Win32 issue.
999 kes Simplify search of autochanger for in-use Volume.
1000 kes Fix exit condition of check for in-use volume. kes Remove
1001 inappropriate my_postgresql_free_result() in db_close()
1003 kes Fix bad return in FD when encryption signature not found.
1004 Probably caused a crash.
1005 kes Inhibit missing encryption signature error messages for
1006 file types where no signature computed.
1007 kes Correct inverted check on autochanger in reservation system.
1008 kes Tweak debug code in autochanger reservation.
1010 kes Add some additional locking in the cats directory in subroutines
1011 that modify packet variables called from batch insert.
1012 kes Rework how dcrs are allocated. new_dcr() can now be called
1013 with an existing pointer, and it will simply clean it up.
1014 This allows the reservation system to test various different
1015 devices, and will permit easy device changes.
1016 kes A bunch of changes all over to handle new new_dcr() calling
1018 kes Work more on the Volume management in the SD. Remember Volumes
1019 for tape drives and for autochangers (even virtual disk changers).
1020 kes When looking at the Volume list to reserve a drive, handle
1021 autochanger names correctly by interating through the changer
1022 devices. Also call the Director to see if a Volume is suitable
1023 for the current job.
1024 kes Fix some bugs in bscan. Make sure all media records are written.
1025 Make sure that valid JobMedia records are written for disk files.
1026 Previously they were completely wrong.
1027 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1028 that the URLs don't change and so that the developers will all
1029 work off the same copy. Rebuild from scrach.
1030 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1032 Release: 2.1.18 beta
1034 kes Fix seg fault in FD from incorrect digest size.
1035 kes Fix argument to non-OpenSSL crypto.c subroutine.
1037 Release: 2.1.16 beta
1039 kes Remove a few malloc()s from the encryption code.
1040 kes Use the class calls to bsock in filed/backup.c and restore.c in
1041 place of the old bnet_xxx code.
1042 kes Implement code that does an on the fly calculation of the
1043 signing digest during restore of encrypted files. It makes
1044 a best guess at the algorithm, and if it is not correct, will
1045 then revert to the old code which reads the file after it is
1047 kes Implement at least one missing crypto stream in stream_to_ascii()
1048 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1049 #877 where a reload with bad syntax causes Dir to exit.
1051 Cut: 2.1.14 beta (not released)
1053 kes Do not free a volume on a tape drive until another volume is
1054 mounted and read, or the autochanger unloads the volume.
1055 This should help the SD re-use volumes that are already mounted,
1056 and should fix bug #886.
1057 kes Apply patch from user brettedgar that allows gnome2-console include
1058 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1059 kes Apply patch from Lucien Weller that fixes day of week calculation
1060 because of DST flag problem. Fixes bug #887.
1062 kes Move find_next_appendable_volume() to after acquiring a valid device
1063 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1065 kes Unable to reproduce bug 872. However added additional testing for
1067 kes Bug #874 resolved by documenting SQLite limitations.
1068 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1069 kes Bug #881 resolved by removing typo in mtx-changer script.
1070 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1071 approval. Added a link to the wiki on the web page, and implemented
1072 a backup from http://paramount.ind.wpi.edu
1074 kes Fix update allfrompool to pass pool name.
1076 kes Convert to pure GPL v2 license.
1077 kes Fix sscanf problems reported by Peter Buschman that caused
1078 a bus error on Solaris.
1079 kes Rework (simplify) the select prompt in bat.
1080 kes Move get_jobid_from_tid() into lib and create a
1082 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1083 should definitely fix the problem of lost error messages in the
1085 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1086 kes Eliminate tcpd.h from the project. Enclose the #include from the
1087 library with extern C ...
1088 kes Add print of signal name when a signal is trapped.
1090 Release: 2.1.12 beta
1092 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1094 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1095 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1096 makes SQLit3 run 30 times faster, though a bit less safe.
1097 kes Implement --with-batch-insert in configure and detection of thread
1098 safe libraries. It is on by default, but turned off if no thread
1099 safe library (e.g. SQLite 2) is available.
1101 kes Fix Bacula PostgreSQL buffer overruns.
1102 kes Do better checking for NULL results returned from PostgreSQL;
1103 implement retry for failed queries; clear results buffer after
1104 failed query. Hopefully this will correct the PostgreSQL failures.
1106 kes Implement algorithm to handle only one appendable volume with
1107 Prefer Mounted Volumes = no.
1108 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1109 returned from a query.
1110 kes Make volume lock recursive.
1111 kes Implement an additional volume reservation algorithm that
1112 starts by considering all reserved volumes then uses the
1113 old brute force algorithm of searching the resources to
1114 find a suitable device.
1115 kes Add new reservations debug code and refine the old code.
1116 kes Update the win32/dll/bacula.defs file.
1118 kes Tweak reservations algorithm to permit a few more cases, i.e.
1119 volume reserved, but on different drive, ...
1120 kes Enhance SD status to include Pool and Media Type for drive in a
1121 more readable format (a bit longer).
1122 kes Fix PostgreSQL double free.
1124 kes Minor refactoring of restore decryption code.
1125 kes Add code to smartall.c to detect double free of a buffer.
1127 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1128 so that bsmtp will create a correct email address (mailbox only).
1129 kes Modify 'memory' command so that the buffers are listed as 'In use'
1130 to avoid confusion with Orphaned buffers.
1131 kes I reworked the OpenSSL include/lib flags to be handled in
1132 the standard Bacula way, which should fix bug #863 concerning
1133 non-standard OpenSSL libraries.
1135 kes Implement Help Browser window for bat.
1136 kes Fix reload bug that reset StorageId to zero.
1138 kes Fix TLS #ifdefing when TLS turned off.
1139 kes Ensure that when labelling a tape with Slot=0 that InChanger
1141 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1143 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1144 add DISTINCT (required by PostgreSQL).
1145 kes Implement BSOCK authenticate_director() method. Eventually will
1146 authenicate all daemons.
1147 kes Move several more functions into the BSOCK class.
1149 kes Add code to tell the OS that we no longer need a cached
1150 file that we were reading. In findlib/bfile.c. Also,
1151 only cache files that we are reading. Thanks to
1152 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1153 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1154 kes Implement script to automatically generate cats and dll .def
1155 files for Win32 dll.
1156 kes Update README.mingw32 to include new .def file generation.
1157 kes Correct typo in UTF-8 error message as reported by:
1158 jhernandez <julianhernandez@gmail.com>
1159 kes Add additional sm_check() code on debug level 1.
1160 kes Set default debug level to 1.
1161 kes Trap SIGABRT in attempt to get traceback.
1163 kes Reduce bat connect timeout from 30 to 15 seconds.
1164 kes More restructuring and implementing BSOCK class in place of
1166 kes Remove a few unnecessary malloc() tests in crypto code.
1167 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1168 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1169 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1171 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1173 kes Fix Verify InitCatalog. The attributes were not pointing to the
1174 correct saved location.
1175 kes Implement message callback so that GUI is sure to get all
1176 daemon messages. Currently displayed in a dialog in bat.
1177 kes Ignore SIGUSR2 (Bacula timer) in bat.
1178 kes Apply regress patch from bug #859 to allow regress to work
1179 with Solaris compiler.
1181 kes Begin adding TLS support to bat.
1182 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1183 clean up lex.c and make it more readable.
1185 kes Move more bnet functions into the BSOCK class.
1186 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1187 kes Complete change of berrno strerror() method to bstrerror()
1189 Release: 2.1.10 beta
1191 kes Cleanup incorrect email addresses in bsmtp.
1192 kes Make bat display initial messages rather than discard them.
1194 kes First cut of adding .mod to the run command.
1195 kes Implement auto display of messages in bat.
1196 kes Enhanced preferences to allow all Bacula output to be
1199 kes Try to make bsmtp date routines more generic.
1200 kes Fixed bug #856 autochanger documentation.
1201 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1202 kes Add new cats entry point so Win32 builds.
1204 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1206 kes Do better checking for the MySQL 64 bit libraries looking for both
1207 .a and .so libraries.
1208 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1209 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1210 kes Require the thread safe version of MySQL during configure. Thanks
1211 to Andre Noll for pointing this out.
1212 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1213 continuing in migration code.
1214 kes Apply implementation of tray-monitor font derived from gnome-console
1215 submitted by Andreas Piesk <a.piesk@gmx.net>
1217 kes Eliminate important memory loss in SQLite
1218 kes Fixed the batch insert MySQL thread specific data that was not
1219 being freed. See cats/mysql.c:db_thread_cleanup().
1220 kes Fix restore before command.
1221 kes Convert old hdr.name to name() in a few places.
1222 kes Implement update jobid command.
1223 kes Return all time_t dates in db_get_job_record()
1224 kes Stop watchdog in SD earlier.
1225 kes Put Pool just after Storage in please mount message.
1226 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1229 kes Update the po files.
1230 kes Fix Verify InitCatalog by making it cache attributes.
1232 kes Change name bacula-bat to bat for man 1 page to correspond to
1234 kes Check for client and store NULL pointers in status command. This
1236 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1237 kes Fix sign extended editing of %p.
1238 kes Clean out a little old #ifdefing in cats/mysql.c
1240 kes If time diff between DIR and FD is more than 600 seconds convert
1241 INFO message to WARNING.
1242 kes Implement heap size display in status for all daemons.
1243 kes Attempt to fix MySQL db open memory loss (not successfull).
1244 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1245 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1246 Query. This looks like a MySQL but but by doing extra releases,
1247 the memory goes away. This should fix bug #847.
1249 kes When backup fails, cancel SD before waiting for sd termination.
1250 kes If SD is waiting for FD to connect during cancel, wake up the
1252 kes Fix fsf code so that errno is correctly reported.
1253 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1255 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1256 so that Bacula doesn't later stumble into a seg fault.
1257 kes Use the term Restore Client in the restore Job report.
1258 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1259 the original job's FileSetId.
1260 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1261 spooling in migration jobs. Not yet tested.
1262 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1263 reading conf file from a pipe. However, do it with open_bpipe()
1264 rather than popen. Not yet tested.
1266 kes Fix an ugly bug where the VolCatBytes were getting updated
1268 kes Implement bconsole memory command that prints current memory
1269 usage, plus smartalloc dump.
1270 kes Clarify some error messages in backup, admin, and migrate.
1271 kes Shrink label dialog to smaller size.
1272 kes Invert Cancel OK buttons on restore to be OK Cancel.
1273 kes More strerror() to bstrerror() conversions.
1275 kes Start implementing bstrerror() in place of strerror().
1276 kes Stripping path -- seems to work.
1278 kes Prevent door and port files from being restored (mostly
1280 kes Free an unreleased buffer in compat code.
1281 kes Change console Job name from *Console* to -Console- to eliminate
1282 Win32 filename problems. Put Win32 path separator when creating
1283 Console file. This fixes bug #846.
1284 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1286 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1288 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1289 to force Win32 error message.
1291 kes First cut strip path. The data should be passed to the FD,
1292 but nothing is done with it yet.
1293 kes Enhance the digest and signature routines in the crypto
1294 library to accept a JCR and to use it to print error messages
1295 so that they will go in the Job report rather than the daemon's
1297 kes Simplify some of the verify signature code.
1298 kes Simplify a few of the alternative returns in the signature
1301 ebl Use only POSIX regex instead of GNU regex in breg.c for
1302 File relocation. It fix broken freebsd compilation.
1303 kes Convert all other Dir files to use new ua class message
1305 kes Tentative fix for missing digest signature in bug 807.
1306 kes Correct handle problem in new win32_ftruncate routine.
1307 kes Convert ua_purge.c and ua_update.c to use new ua class
1308 message routines for bat.
1310 kes Correct incorrect installation of LICENSE in Win32 installer.
1311 kes Display LICENSE at the beginning of the Win32 install.
1312 kes Attempt to correct the need for the png files to be installed
1314 kes Reapply my bat.conf install script in qt-console. I think I
1315 editted bat.pro instead of bat.pro.in and it was lost.
1316 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1317 the /var/lock/subsys for subsysdir. Also corrects typos in the
1320 kes First cut update job.
1321 kes Correct configure to include qmake of src/qt-console directory.
1323 kes Make restore job yes/mod/no print in one command so GUI works.
1324 kes First cut implementing backup and restore client.
1325 kes Correct editing in Verify output that caused a seg fault.
1327 kes Insure that bat.conf is not overwritten during installation.
1328 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1329 while I was implementing migration in March 2006 !
1331 ebl Cleanup file relocation, using char *RegexWhere instead of
1332 char *where + bool where_use_regexp
1333 kes Update some manpages and add bat manpage.
1334 kes Make a first cut at converting bacula.spec.in for bwx-console
1336 kes Apply patch from John Goerzen to add hostname as fourth argument
1337 to make_catalog_backup script.
1338 kes Fix typos I introduced into bsmtp.c
1339 kes Make pm_strxxx() routines handle input of NULL pointer. This
1340 is to protect from NULL pointers returned from SQL databases.
1341 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1342 kes Add more debug to FIFO code -- fix fifo regression test.
1344 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1345 kes Add thread timer to bnet_connect() to break from OS if wait time
1348 kes Update Win32 build to include new files, new symbols, and
1350 kes Implement socket level heartbeat (tcp_keepidle)
1351 ebl Commit File relocation patch
1352 kes Make bat have 'make install' target.
1353 kes Warn during install if old gnome-console binary found.
1354 kes Warn during install if old wx-console binary found.
1355 kes Add -8 option to bsmtp command line to add content type utf-8.
1356 Fixes bug #809. (Character coding problem in bsmtp).
1357 kes If < is found in target (from, to, cc) then do not enclose the
1358 target in < > in bsmtp. Fixes bug #772 (malformed address).
1359 kes When printing certain items in dbcheck, stop after 300000.
1360 Fixes bug #822. (dbcheck loops).
1361 kes Incorrect status in Dir after waiting for mount with poll set.
1364 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1366 kes Print waiting to reserve a device every 5 mins.
1368 kes Don't call close_part in label.c if tape and relabel.
1369 kes Don't free volume if busy in close() -- should help with
1371 ebl Fix #824 RunScript bug (After script could be execute twice)
1372 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1373 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1374 Add a regression script to test RunScript
1376 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1379 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1380 deprecated. No additional bugs will be fixed, and they will be dropped
1381 in a future release (probably 2.4.0).
1382 kes Change name of wx-console to bwx-console to make it more Bacula
1384 kes Change the name of gnome-console to bgnome-console to make it
1387 kes Some time in March, a Feature Request with patch from Jorj Bauer
1388 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1390 The ability for the director to validate a Client (FD) CN against
1391 an arbitrary set of patterns rather than the hostname, with
1392 A new 'TLS Allowed CN' set of directives which are implemented
1393 in the Client resource. Then pattern matching is used in place
1394 of hostname matching against the Certificate's CN. As an example, we
1395 have certificates which (a) use a local CA, and (b) have a CN of the
1397 kes Add new/changed entry points to Win32 build
1398 kes Create unaccepted-projects for projects that are not accepted.
1399 kes Simplify locking in the reservations system.
1400 kes Add more debug code in reservations.
1401 kes Make sure error condition on reserving a volume is handled correctly.
1402 kes Correct handling of volume_in_use.
1403 kes Correct handling of initializing a device.
1404 kes Move handling of broadcasting releasing a device into release_device().
1405 kes Correct attaching dcr to dev so that it is only done if device
1406 is properly initiated.
1408 kes Locking debug level tweaks in SD.
1409 kes Tweak new Volume code.
1411 kes Add exec external-command [wait-seconds] to bconsole. This
1412 executes the external-command. Note! normally external-command
1413 should be enclosed in double quotes.
1414 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1415 it should normally be off in a production system.
1417 kes Implement die command for SD so that we can force it to dump.
1418 kes Implement SD lock debug code.
1419 kes Implement new algorithm for keeping Volume list in SD. It
1420 is now owned by the device.
1422 kes Implement new code for freeing in use volumes that should
1423 resolve if not all, some of the problems of multiple drive
1424 tape conflicts described in bug 801.
1426 kes Fix gui/bacula-web/images files in svn.
1427 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1429 ebl Fix a bug in batch mode (in string escape)
1430 kes Correct migration prune SQL typo that crept in in a
1431 recent 2.1.x change.
1433 kes Move bnet_despool() into class in bsock.c
1434 kes Modify job report to include director name and Build OS.
1435 kes Move drop root privilege and check_catalog() before fork.
1436 kes Add update database scripts (version 9 to 10) to updatedb directory.
1438 ebl Check size and age of each file after its backup to see if
1439 it has changed during backup, if 'checkfilechanges' is set.
1440 The FD will do an extra check (stat(2)) after
1441 each file backup. mtime, ctime and size are compared with
1442 'before backup' information. If time or size mismatch, an
1443 error message will be generated. You must upgrade FD to use it.
1445 kes Make database name and user configurable
1446 --with-db-name=xxx --with-db-user=xxx
1447 kes Add back database type to message.c for debugging.
1449 kes Implement dir_sql() which issues an SQL query.
1450 kes Modify bat medialist to use dir_sql() and do some minor C++
1451 formatting as well as eliminating a number of pointers, simplifing
1454 kes Fix some of the mtx-changer grep commands for tape label readers.
1455 kes Convert a number of bsendmsg into the appropriate send/warning/error
1456 message class calls.
1457 kes Suppress the using database message in the .sql command.
1458 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1460 kes Add context menu for floating a window.
1461 kes Some minor cleanup and name changes in qt-console
1462 kes Add doing mt setblk 0 in Win32 mtx-changer.
1463 kes Apply Martin's bug fix to move definition of ENODATA for
1465 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1466 sqlite2 and sqlite3.
1468 kes More pruning cleanup.
1469 kes Turn on wait_for_drive by default in mtx-changer.
1470 kes Turn on Batch insert code by default as it now passes regression.
1471 kes Add ./configure --enable-bat to enable building of Bat.
1472 No install yet though.
1474 kes Implement a new .sql command for bat.
1475 kes Implement code to turn off pruning in obtaining the next volume.
1476 Pruning is turned off for the status dir command, but turned on
1477 for SD requests and for the list nextvolume command.
1479 kes Correct Qmsg() that was not updated correctly when committing a
1480 previous change (probably the recent TLS patch).
1482 kes Write new subroutine is_volume_purged() that explicitly checks
1483 if the Volume is purged, and if so marks it as such. This should
1484 resolve problems reported about needing to mount twice to recycle
1486 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1487 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1488 amount of duplicated code.
1489 kes Do volume pruning only for the Media Type desired (reduces pruning time
1490 if multiple Media Types are in the same pool).
1491 kes Implement more detailed info in the Job report for the Bacula version
1493 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1495 ebl Add bbatch tool to bench database and insert mode.
1496 Fix sql quote stuff in batch mode
1497 Fix sql stuff for mysql
1499 kes Correct problems with am/pm scheduling. Fixes bug #808.
1500 kes Implement new prunning code that prunes up to 1000 jobs at
1501 the same time. The same technique can be applied to a number
1502 of other prune/purge subroutines.
1503 kes Add an insanity check when starting a new tape job to ensure
1504 that the tape position has not been changed. If so fail the
1506 kes Fix Win32 build for dlls to add the folllowing:
1507 src/lib/bsock.c -- new file with new entry points
1508 src/lib/dlist.c -- new entry points
1509 src/cats/sql_create.c -- new entry point
1510 src/cats/sql_cmds.c -- new DATA item exported
1512 ebl batch mode cleanup bscan-test is ok now.
1513 kes Implement SD code to check length of disk volume before appending.
1515 kes Correct return status on db_batch... routines.
1516 kes Add call to db_write_batch_file_records() to migration code.
1517 ebl Fix AfterJob timing
1518 kes Move the checking of the database in initializion of the Director
1519 to after we drop privileges. This avoids the need for both root
1520 and bacula access to the DB.
1521 kes Correct a misplaced variable definition in src/filed/backup.c
1522 kes Correct how the new batch insert db_create_attributes_record()
1523 uses the arguments. Caused a seg fault in bscan.
1524 kes Implement lock() and unlock() methods in DEVICE class.
1525 Implement block() and set_block(xx) methods in DEVICE class.
1526 kes Modify bnet_connect() so that it uses time() to check for the
1527 wait time expiring (on some OSes, some system calls may not
1528 return immediately).
1529 kes Modify Verify to obtain the previous JobId when it is actually
1530 running rather than at schedule time (as it was in 1.38.x).
1531 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1533 kes When checking pid in pid file, continue running if the pid is
1534 the same as ours. This occurs on IRIX after a system crash.
1537 kes Extend new GUI API.
1538 kes Make the ua structure a class, and implement send_msg(),
1539 error_msg(), warning_msg(), and info_msg().
1541 kes Apply fix from for building wx-console on the Mac from
1543 kes Implement new select mechanism for GUI programs.
1544 kes Reorganize initialization of stackedWidgets in bat.
1546 kes Add updated nagios plugin supplied by Christian Masopust.
1548 kes More bat implementation.
1549 kes File migrate bug with Pool Occupancy using mediaid instead
1550 of jobids. Fixes bug #795.
1551 kes Fix orphaned buffers in filed backup and verify due to
1552 crypto buffers not freed during errors. Fixes bug #789.
1553 kes Extend new GUI api code to tree commands.
1554 kes Ensure that tree and dot commands check console ACLs.
1555 kes Permit marking directory with trailing slash.
1556 kes Allow 20 console connections (instead of only 10).
1558 kes Add smartctl call to bacula-sd.conf as an example of getting
1561 kes Modify jobq.c to let simultaneous restore jobs run. This may
1562 cause them to fail if they cannot get a drive.
1563 kes Add Client Connect Wait to Storage daemon to permit users to
1564 modify the time the SD waits for a FD connection.
1566 kes Correct virtual changer check which was backwards. This caused
1567 volumes to be unloaded into slots already occupied.
1569 kes Apply Command ACL filter to JobId list in restore command.
1570 kes Correct typeo in var.c patch.
1572 kes Don't let Bacula prune File or Job records for the current Job.
1573 kes Fix variable substitution pad + inc bug reported (with patch)
1576 kes Correct SQLite log table index as reported by Luca Berra.
1578 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1580 kes Begin implementing new comm signals for API.
1581 kes Fix a few places in lib/message.c where the open fd may
1583 kes Continue implementing lib/bsock.c (real class). Make jcr,
1584 who, host, and port private. There are new methods to access
1585 them for non-class use. This required touching a number of files.
1587 kes Add LANG=C to autoconf/randpass so it works with languages other
1588 than English. Fixes bug #788.
1590 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1592 You will not be able to generate Include/Exclude list any more.
1593 It will be fixed soon.
1594 If you want to use this, you can apply
1595 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1597 kes Restore of sockets created false error messages because Bacula
1598 no longer restores sockets, but the code was still trying to
1599 set the attributes on a non-existent file. Reported by a user.
1600 ebl finish RecyclePool feature
1601 Media will takes Pool.RecyclePool
1602 when moving from Scratch to a Pool or when user will do
1603 update volume=xxx frompool
1604 To use it, add RecyclePool = aPool to your Pool resource
1607 RecyclePool = Scratch
1611 kes Expand new BSOCK class adding signal() and new BNET signals.
1612 kes Begin enhancing the dot commands adding a new API function
1613 that returns more information and will make it easier
1614 to interface to the Director from a program.
1616 kes Make DEVICE fd private. Its new name is m_fd, and can be
1617 obtained with dev->fd() outside the class. This is the
1618 first of many DEVICE members to be made private.
1619 kes Implement Michael Renner's idea on having a virtual disk
1620 changer. I made some minor modifications (e.g. I did not
1621 implement the Virtual Changer directive, but simply set
1622 the Changer Command to an empty string.
1624 kes Implement a BSOCK send() method that writes the whole record
1625 in a single write() request rather than in two.
1626 ebl add update volume=xxx recyclepool=yyyy
1627 volume takes recyclepool from pool when using update volume=xxx from pool
1629 kes Fix encryption deblocking bug, which caused some restored files
1630 to be truncated. This fixes bug #763.
1631 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1632 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1634 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1635 ebl Use btime_t instead of uint64_t in media patch.
1637 kes Optimize the use of the database a bit in the Status dir command.
1638 Only open it when needed, ensure that if any previous database
1639 was opened, it is closed.
1641 kes Correct VolCatBytes bug from media patch.
1642 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1643 in the case of orphaned records.
1644 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1645 and File records in 300K chunks to be more efficient. This
1646 idea came from Juan Luis Frances (if I remember right).
1647 kes Apply Eric's scratch patch that moves a purged Volume to
1648 the RecyclePool. Question: how is RecyclePool set? what
1649 happens to the ScratchPool?
1650 kes Apply Eric's media patch that collects read/write media
1651 times as well as byte counts. This patch requires a
1652 simultaneous upgrade of the DIR and SD. Note, there
1653 should be some way to turn off timing. I'm not sure
1654 times are in Bacula units.
1655 kes Apply Eric's batch-insert patch.
1657 kes Update projects list.
1659 kes Implement Include/Exclude file lists in FD as dlists using
1660 the new dlistString class. This permits efficiently having
1661 large include/exclude lists and completes project Item 25.
1662 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1663 console is authorized to cancel the job. This fixes bug
1665 kes Modify SD so that the VolCatJobs medium record is updated
1666 at the beginning of a Job rather than the end. This
1667 fixes bug #775 where exceeding MaxVolJobs caused jobs
1669 kes Added a mutex around getting and setting Volume information
1670 so that multiple simultaneous jobs will single thread.
1672 Switch to using Subversion
1673 kes Remove src/pygtk-console/ from configure
1675 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1676 plus the entrypoints.
1677 kes Apply patch supplied that corrects debug print
1678 in canceling jobs for max run time. Supplied as
1679 part of bug #621, which was previously fixed.
1681 kes Test on job_canceled() and sd_msg_thread_done inside
1682 loop starting the message thread to avoid a race condition.
1684 kes Remove rl_catch_signal from console.c as it conflicted
1685 with the header definition. Fixes bug #765.
1686 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1688 kes Clarify some stored/acquire messages to indicate if the
1689 problem is with read or append.
1691 kes Fix memory leak with storage ids in cats/sql_get.c
1692 kes Terminate watchdog earlier to avoid reference to released
1693 memory -- reported by Jason Austin.
1694 kes Move closing the database from jobq.c to the director daemon
1695 termination routine. This fixes memory leaks for shadow jobs
1696 (i.e. migration jobs).
1697 kes Free up the unique jobid chain items in migrate.c. This fixes
1698 a memory leak problem.
1699 kes Convert some ugly looking for statements to use foreach_alist
1700 in findlib/find.c. This will facilitate converting the structures
1701 to use dlist (for large include/exclude lists).
1702 kes Fix a bug in the btree.c and btree.h routines, then rename them
1703 rblist and add them to be built in src/lib. Include some new
1704 methods written by Rudolf Cejka that make the code more readable
1705 (hides some of the ugly casting).
1706 kes Add set_next() and set_prev() methods which make the code much more
1707 readable. Also add a new dlistString class that facilitates storing
1708 strings in dlists. To be used in the large include/exclude lists.
1709 kes Make some trivial modifications to lib/tree.h that use rblist
1710 rather than dlist for storing the tree links. This was suggested
1711 by Rudolf Cejka. The result of this is that the restore tree now
1712 uses red-black binary trees rather than simple linked lists. This
1713 should give rather dramatic speed improvements for directories
1714 contining large numbers of directories/files (more than 10000).
1716 kes Fix maxruntime bug #621.
1718 ebl Implement the include JobID in spool file name project.
1719 kes Reorder projects file in order determined by Jan 2007 vote.
1720 kes Implement item #12 on project list -- quick release of FD by
1722 kes Fix open of SQLite3 db where user does not have write permission
1723 so that DIR does not crash. Fixes bug #761.
1725 kes Add back missing @ in Win32 Makefile.
1726 kes Change 'Device not configured to autolabel' from INFO
1728 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1729 which should restart an indefinite # of times.
1730 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1731 other DIR specifications.
1733 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1734 Fix path quoting in SQLite scripts.
1735 Fix problems with SHGetFolderPath.
1737 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1739 kes Fix Job restart on error bug that promotes an Inc to a Full
1740 backup. This should fix bug #755.
1741 kes Add qt-console and first cut of code.
1745 kes Fix Bacula->Documentation link on Win32 to point to index.html
1746 instead of bacula.html. Fixed bug #750.
1747 kes Return JobId in db_get_job_record() when JobId==0. This should
1749 kes Do not release source pointers when restarting a failed job.
1751 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1752 This *should* fix bug #747.
1753 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1756 kes Modify USTORE constructor to set an empty store_source string,
1757 and don't copy the store_source string in a cancel. Hopefully
1758 this will fix Arno's seg fault, bug #744.
1759 kes Add back code to disable conio in configure. Fixes bug #743.
1760 kes Correct the Options scanner in the FD to correctly handle
1761 SHA1 option, which was eating the next option. Reported by
1763 kes Add code to indicate when the SD is spooling, spool wait, and
1764 despooling as requested by Alan Brown.
1766 Version 2.0.0 released: 4 January 2007