1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Fix multiple media restore.
29 kes Make DEVICE Slot private and access it via a method.
30 Allows better control over when it is set and cleared.
31 kes Fix possible seg fault if SQL error.
33 kes Add Martin's fixes to argument scanning for the estimate
34 command. This fixes bug #1093.
35 kes Add debug code to SD.
36 kes Fix renaming a Volume, which used the wrong Volume name.
38 kes If operator has rewind tape, print warning, release tape and
39 try once more. If tape is positioned somewhere, something went
40 wrong, so mark the tape in error and try once more. Previously
41 this error was fatal, now it produces an error message.
42 kes Ensure correct volume name displayed during restore
43 kes Ensure that Volume is mounted for restore.
45 kes Fix a few more Coverity reported problems.
47 kes Apply Allan Black's status dir job count patch.
48 ebl Add information about IMPORT/EXPORT slots in mtx-script.
49 kes Enhance a couple of SD debug messages.
50 kes Tweak unload flag setting and ensure it is set during swap.
52 ebl Fix #1091 about bad output in estimate command.
54 kes Modify autochanger locking to attempt to avoid race
56 kes Make sure device not busy before doing label command.
57 kes Display open() errors except when polling. Previously too
58 many were suppressed. This should fix bug #1070.
59 kes Fix Win32 reparse points. Bacula will not recurse into any
60 reparse point directory, including mount points, unless the
61 directory is explicitly mentioned at the top level (same as
62 with Unix). A file that is linked to another file will be
63 backed up -- much as Unix does for hardlinked files.
66 kes Remove double quotes from ChangeLog and ReleaseNotes
67 kes Remove StorageId test when pruning and recycling (Eric's changes).
68 kes Remove old form of locking when getting volumes -- causes deadlock.
69 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
70 the name unique and to eliminate compile time error.
71 kes Add accurate.o to Win32 FD Makefile
73 kes Fix cats dll build on Win32 after db_update_job_end_record
74 calling sequence change.
75 ebl Switch to tokyo dbm instead of htable in accurate code
76 ebl Include tokyo dbm to bacula source tree
78 kes Fix buffer overruns detected by Coverity.
80 kes Tweak joblog display.
82 kes Implement --without-qwt
83 kes Fix layout of restore tree dialog
84 kes Add configure bat QWT libraries, so that bat can be built
85 with or without the QWT libaries.
87 ebl Add dummy tape driver for regression tests.
88 kes Make sure we unload the right slot when swapping.
90 kes Add debug times, reduce size of two-pool-changer test
92 ebl Tweak autoconf scripts for faketape
94 kes Improve SD reserve debug code.
95 kes Testing an improvement to free up volumes no longer in use.
97 kes Rework SD acquire for read to handle autochanger Volume
99 kes Implement regression that explicitly tests swapping a Volume
100 from one drive to another.
101 kes Enhance disk-changer to detect most error conditions.
102 kes Fix SD code so that it properly swaps a Volume between drives.
103 This fixes bug #1083.
105 kes Apply libdbi patch from Joao Freitas for regress and for
106 Bacula trunk. Regress now works with libdbi. Nice.
107 kes Apply .nobackup patch from bug #1077 submitted by
109 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
110 name into jobs cloned via the run directive.
112 kes Prevent a Volume that is being swapped from being freed from
113 the volume list. This will most likely fix, at least partially,
115 kes Fix strippath so that it does not get a buffer overrun and crash FD.
116 This fixes bug #1078.
117 kes Remove 50 millisec wait in SD that broke debugger.
118 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
119 that a job may run, counted from when the job was scheduled.
120 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
121 a job may block waiting for a resource, counted from when the job starts
122 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
123 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
124 that implements multiple commands per line in the console when using
125 readline. Modify the default to use a semicolon as the command separator.
127 ebl Fix SQL query in migration code.
128 ebl Make accurate mode with hash disk pass regression tests
130 ebl Implement first cut of accurate backup with hash disk.
132 kes Force unload of volume when wrong volume mounted in SD.
134 kes Fix bat seg fault at termination.
135 kes Add Bacula generated version to bat about box.
138 kes Experiment with allowing multiple read jobs.
139 kes Move final volume swapping code to DCR method and
140 call it from acquire_for_read().
141 kes When wrong volume is mounted during read, unload_autochanger.
143 kes Integrate the libdbi changes from Joao Henrique Freitas
145 kes Stop searching for Volumes in SD askdir if DIR returns the
146 same volume name twice in a row.
147 kes Close bat console windows first to eliminate error message
150 kes Tweak the swap Volume from one drive to another code so that
151 it now seems to work.
152 kes Resolve several problems with recycling that broke the new
153 code (these problems are in 2.2.9 as well).
154 kes Remove the volume lock when calling the sysop code.
155 kes Don't mark a reserved volume with no writers as unused otherwise
158 kes Rework class structures for VOLRES, DCR, and DEVICE to make
159 the method names a bit more logical, and for more logically
160 handling the responsibilities.
162 kes Remove redundant code in terminating the scheduler that just
163 causes a seg fault in many cases.
164 kes Cleanup releasing a volume and make it a DCR method.
165 kes Improve algorithm for detecting pre-reserved volume and
168 kes Tweak volume swapping code so it works.
169 kes Correct name overloading in mount.c
170 kes Replace released flag in VOLRES with reserved and add access
171 methods for the VOLRES class.
172 kes Prevent volume from being released while being swapped.
173 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
175 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
177 kes Refactor parts of stored/mount.c
179 ebl Add sanity checks for VolWriteTime and VolReadTime
180 ebl Take care of bad clock changes while computing VolWriteTime
181 and VolReadTime. This should fix or limit #1066
182 kes Correct error string numbers in dird/catreq.c
183 kes Restructure reserving, acquiring, and mounting volumes. Calls to
184 autochanger are deferred for mount.c -- simplifes the code.
186 kes Do not prune any running job. It just fails the job.
187 kes Lock the volumes when changing dev->reserved_device and marking
188 the volume unused otherwise the device can get reserved by
189 another job before the volume is released, thus blocking it.
191 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
192 kes Fix bug #1063, reuse of freed ptr in list nextvol.
193 kes Release regex compile buffer in filed/job.c
194 kes Add proper type of const char in sql_create.c
195 kes Turn off debug in daemon termination routines
196 kes Move free_volume_list() before devices are freed in stored.c
197 kes Fix reference to uninitalized stack variables in bregex.c.
198 This should correct bug #1067.
200 kes Fix possible seg fault in SD when freeing a volume entry.
202 kes Implement unload_dev() before swap device.
203 ebl Add statistics prunning with option and menu
204 kes Separate unload_dev() from unload_other_device() in autochanger.c
206 kes Apply patch from bug #1069 that corrects spurious error messages
207 when ACLs enabled on SGI but no ACL exists.
208 ebl Fix small segfault in bacula-sd when debug level is 500
209 kes Modify run_program() and run_program_full_output() to use
210 call by reference for the results string. This corrects a long
211 standing problem where the address of the string may be changed
212 in the subroutine but not in the calling program.
214 kes Re-enable code to remember last volume mounted on a non-tape
216 kes Add patch supplied in bug #1068 that fixes a SD crash when using
217 a Virtual autochanger.
218 kes Generate correct JobMedia records during spooling/despooling when
219 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
220 <tih@hamartun.priv.no> for excellent analysis and testing.
222 kes Tweak hash algorithm for htable using Martin Simmons idea
223 for doing a circular shift.
224 kes Remember what volume is in VTLs (previously turned off for
226 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
227 pointed out some problems in creating JobMedia records during
228 spooling with concurrent jobs. Fix the problem by updating the
229 start file position before despooling and generate a jobmedia
230 record at the end of despooling.
232 kes Fix handling of JobMedia records during spooling and when a
233 Volume is changed without actually writing data to the Volume.
235 kes Rework certain SD locking based on gdb tracebacks of deadlocks
236 sent by Eric. This code now uses only the volume_lock() rather
237 than the reservations lock when at EOM and acquiring a new
239 kes Ensure only one exit point in several subroutines.
241 kes Implement bsock code to permit locking. Use the new code in Verify
242 in the FD to prevent the heartbeat thread from disrupting the Verify
243 data sent to the Dir.
244 kes Modify SD locking to eliminate locking the reservations system from
245 outside the system. Use the volume lock when getting media data
246 and reserving a new volume at end of media.
247 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
248 when SD starts are not locked into place.
250 kes Fix error compiling runscript code on 64 bit machines.
251 kes Tweak Win32 mount point code.
252 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
253 cleared giving bad file estimate).
254 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
257 kes Keep Schedule run lists in order as suggested by
260 kes Implement autostart scripts for Debian.
261 ebl Implement upgrade catalog scripts.
263 ebl Apply jobstat patch for long term statistics. Have to implement
264 purge stats command and upgrade scripts.
265 kes Fix mtx-changer.in for broken Debian mt program.
267 kes Fix large number of JobMedia records reported by Eric Bollengier.
269 kes Apply doc fix from bug #1062.
270 kes Resolve crash and improper restore wx-console Win32 restore
271 GUI. Fixes bug #1065.
272 kes Update Win32 wxWidgets to latest version.
273 kes Attempt to do correct handling of Win32 mount points. Should
275 kes Fix Win32 FD backup/restore memory leak due to improper termination
276 of BackupRead/Write. This fixes bug# 1038.
278 ebl Reduce memory usage for accurate backup, working only with ctime
279 and mtime. (not all Lstat field)
280 About 40MB for my linux system (400.000 files)
282 kes Add dcr->reserved_volume flag that allows us to release a volume
283 even if it is not vol->released. This allows maxvol2 to work when
284 Volumes expire and we are already writing to the device (i.e. a
285 volume is pulled out from under us by another job terminating after
286 we reserve the drive).
288 ebl Permit multiple command/console per runscript definition.
289 RunScript { command = /bin/true ; command = /bin/false ... }
290 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
291 (restart an application) just after the VSS snapshot on windows.
292 kes Don't zap dcr values during release_volume() as they might
293 have the next Volume to be mounted.
294 kes Fix AIX prototype.
296 kes Second cut of drive switching during backup.
299 kes Update Win32 version of wxWidgets to most recent version.
300 kes Tweak Copy job details.
301 kes Rework dir_find_next_appendable_volume to make a bit more effort
302 to find a suitable volume before giving up.
304 kes Make ask_sysop_to_create... to return if waken from wait.
305 This helps get out of blocked conditions.
306 kes Experimental implementation of switch_device in reservations.
307 kes Implement FD version to allow easier protocol changes.
308 kes Add Plugin Options string -- not yet passed to FD.
309 kes Implement PluginOptions ACL.
311 kes Attempt to correct problems with restores with autochangers and
312 use counts going negative
313 kes Rework SD status command and implement API for bat. Implements
314 header, runing waitreservation, devices, volumes, spooling,
315 and terminated status keywords.
316 .status storage=xxx <keyword>
317 kes Clarify TLS error message by adding double quotes around name.
318 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
319 kes Pass jcr to tls routines so debug messages can be handled better.
320 kes Rework jobq resource allocation code, and possibly fix a bug
321 that caused reference counts to get out of sync.
323 kes Rename fd/dir plugin to use Bacula standard underscore.
324 kes Plugin work -- bring dir up to fd level.
325 kes Start implementation of VTL code
326 kes Fix Win32 build after adding new cats subroutine.
328 kes First cut at Duplicate Job implementation.
330 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
331 kes Start PluginOptions string, and refactor a bit of ua_run.c
332 ebl Apply Allan patch that permit to reset recyclepool.
334 kes Test patch -- possible fix or improvement for bug #1053
335 kes Refactor FD and SD status commands to permit new API code in
336 SD, and to fix Win32 build.
337 kes Win32 build is now working.
339 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
340 some ideas in patch from Scott Bailey.
341 kes Begin implementation of duplicate Job control.
342 kes Fix some of Win32 build after recent additions.
343 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
344 which causes the FD to detect whether or not the OS has the
345 honor no dump bit (*BSD systems), and if so, to skip backing up
346 any file with this bit set. The feature is enabled by setting
347 'honor no dump flag = yes' in the Options section of a FileSet.
349 kes Correct po warning message with datarootdir
350 kes Implement more code in dird.c to put configuration parsing in
351 a class rather than use globals.
352 kes Restructure SD status command for implementation of bat API
355 kes Suppress incorrect 'Will not descend from x into y' messages.
356 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
357 daemon globals used by parser.
358 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
360 kes Fix free of plugin_list when none exists.
362 ebl Apply accurate project patch.
364 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
365 on non-mempool object)
366 kes First cut of converting FD .status to work with bat API.
368 .status client=XXX header
369 .status client=XXX running
370 .status client=XXX terminated
371 kes Implement first cut of Copy Job.
372 kes Implement Catalog in Pool resource. It overrides catalog specified
373 in the Client resource.
375 kes Apply patch (with some difficulties) from Joao Henrique Freitas
376 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
378 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
379 ftruncate() actually works. In the case of some (cheap) NAS devices,
380 it does not, and so recycling NAS Volumes does not work. The code
381 simply unlink()s the file, then recreates it. This fixes bug #1011.
383 kes First incomplete cut of big malloc blocks for htable.
384 kes Tweak plugin code.
386 kes Plugin debug code + tweak a couple bat dialog layouts
388 kes Fix creating first JobMedia record during Migration to include
389 proper index. This caused slow restores of migrated jobs.
390 kes Temp fix to plugin name file_index.
391 kes Bacula backed up and restored a MySQL database.
393 kes Implement plugin restore.
394 kes Implement parsing of db_driver to give db_type index.
396 kes First cut of plugin restore code.
397 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
398 and do not strip paths on symbolic links.
399 kes Set catalog backup database and user name from values specified on
400 the ./configure line.
401 ebl Fix #1031 about wrong pool source information in job report.
404 kes Remove a redundant jcr argument to find_files, match_files, and
406 kes Implement '.status dir header|scheduled|running|terminated' that
407 prints the requested status section. With the exception of the
408 header, the other reports have fields separated by tabs (\t).
410 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
411 a resource embedded run command to find a since time if no explicit
412 since time was supplied on the command line.
413 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
414 that updates the state file at job termination time in addition to
415 when the daemon terminates.
417 kes First version where a plugin did a backup.
418 bpipe-fd.so created a backup file, wrote a test
419 string to it, and Bacua could restore this fabricated file.
421 kes Implement DB Driver = string for the DBI driver.
422 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
423 kes First cut of code for loading Win32 plugin dlls. Implement
424 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
425 and implement a dlfcn.h file based on opengroup's definitions of
428 kes First cut plugin directives.
430 kes Apply patch from bug #1049 to prevent stripping the path on a
432 kes Attempt to fix bug #1047 where stripping a path corrupts the
433 heap. Waiting for feedback.
434 kes Correct the Mount message not to suggest labeling a new tape
435 when doing a restore. Submitted by email by John Stoffel.
436 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
437 FD by using casting. Reported in bug #1042.
439 kes A bit of crypto cleanup. More later.
441 Release Version 2.2.8
443 kes Apply patch from Martin to correct bug #1040, bscan sets existing
445 kes Fixed important spelling error in doc -- bug #1045.
447 ebl Fix bextract to be able to extract non-portable Win32 data to
449 kes Move initialization of read/write res lock earlier in the code.
450 This fixes the crash with a null conf file. This fixes bug
452 kes Redefine CURES in lib/parse_conf to be URES and move it all
453 into lib/parse_conf.c -- this responds to bug #1042, but does
454 not fix it. The fix is not to compile with FORTIFY_SOURCE.
455 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
456 the trunk SVN. I don't think this was reported as a bug.
458 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
460 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
462 kes Add DataDespooling and DataCommitting status (committing is
463 the last despooling).
464 kes Finish implementation of new reservations code noted below.
466 kes Fix bsnprintf for float point numbers. I broke recently when
467 parameterizing some variables. This fixes bug #1036.
468 kes Undo recent reservations changes ... will apply them later
469 when they work better.
471 ebl Fixes #1034 which cause mysql to hang the connection after 8h
472 ebl Change default statistics target of filename.name and path.path
473 fields for PostgreSQL. This speeds lookup by indexes. Thanks
475 kes A few more tweaks to new reservation code. Make sure to clear
476 vol released flag when retaking volume. When reading label and
477 label is bad mark volume unused. When recycling, mark volume
478 unused so it can be renamed.
480 kes Fix reserve_volume() so it doesn't release a volume in use
481 (i.e. a volume entry not marked released). This should be
482 the last part needed to fix bug #1018.
484 kes Move Heartbeat documentation from Job to Director resource.
485 This fixes bug #1033.
487 kes Fix existing switch drive SD code to call autochanger to release
488 any old volume. This must be done to keep the autochanger from
489 releasing subsequently newly reserved volumes in doing a close().
490 This should fix bug #1018.
491 kes Fail if attempting to get console input in batch mode. This
492 should help fail RunScript console commands that are incomplete.
493 kes First cut implementing switch_drive() in SD (not actually called).
495 kes Implement first cut running console commands in a RunScript.
497 ebl Fixes bug #1028 where 'Selection Type' option was not usable
499 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
502 Release Version 2.2.7
504 kes Add new free_tls() entry point so that Win32 builds.
505 kes Fix compile warning in src/lib/util.c
506 kes Fix entry point for edit_job_codes() so that Win32 builds.
507 kes Fix seg fault Frank Sweetser reports in regression testing
508 on his systems. The problem was that the original author of
509 bsnprintf.c did not take into account the side effects of
510 using ++x in the argument to a #define.
511 kes Make SD protocol backward compatible with version 2.2.x.
513 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
514 because Bacula no longer restores sockets.
515 ebl Always use ignorecase fileset option on win32 FD.
517 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
518 that implements double quoting include names in conf files,
519 and also allows piping input by having the first character
520 be a vertical bar (|).
521 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
522 that implement %f in RunScripts to pass the FileSet name.
523 kes Skip leading | when lex input comes from a pipe as suggested
524 by Michael Stapelberg <michael@stapelberg.de>.
526 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
527 Nerijus Baliunas <nerijus@users.sourceforge.net>
529 kes Implement Plugin Directory and plugin events.
531 kes Implement a security enhancement: TLS authentication but no
532 encryption. Enabled by setting 'TLS Authentication = yes'.
533 Note when this is on, TLS encryption is turned OFF!
535 kes This patch corrects a problem where the maximum concurrent storage
536 jobs counter gets out of sync during restore jobs causing jobs to
537 'wait on max Storage jobs'. This patch fixes bug #1009.
539 kes This patch fixes bcopy so that it produces correct Volumes.
541 kes This patch eliminates spurious output to the console during a VerifyVolume
542 job that contains encrypted data. It fixes bug #1024.
544 kes This patch prevents the 'status dir' command from trying to use a scratch
545 volume and possibly moving it from one pool to another. This patch fixes
548 kes Add new include to postgresql.c suggested by Marc Cousins so
549 that it compiles correctly with pgre version 8.3.
551 kes Fix --archivedir addition to configure. Replace it with
552 --with-archivedir in configure.in This fixes the regression
554 kes This patch fixes bug #1012 where the job is canceled because
555 of Max Run Time exceeded when the job has not yet started.
557 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
558 one 'part' to write. Instead of each part being stored on disk,
559 written to DVD, then deleted from disk, all parts are written to disk,
560 and only the last is written and deleted from disk.
561 kes This patch fixes the status command to include the formating string for
562 JS_AttrInsterting. It fixes bug #1021.
563 kes This patch should fix the Mac OS X build problem on the latest
564 Darwin, where sys/types.h was not included correctly (apparently
565 due to a change in the Mac headers). The solution was to explicitly
566 ensure that it is defined for the ./configure.
567 This patch also has a rebuild of configure that includes the Debian
568 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
569 kes This patch should ensure that queued messages to the console are
570 displayed as soon as possible. It should fix bug 1007, but has been
571 reported not to work.
573 kes This patch fixes the infinite loop when trying to increase the
574 maximum number of volumes in a Pool during the add command.
575 This patch fixes bug #1008.
577 Release Version 2.2.6
579 db Remove extra data on estimate command in joblist for bat.
581 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
582 really change anything, but is the beginning of doing it *right*.
583 To do it completely right the LastWritten date must be passed to
584 the SD, but it is not yet done.
585 kes Minor tweaks to some bat restore SQL.
586 kes This patch fixes bug #1003 where putting the message output from
587 a Verify job into the catalog results in a recursive loop. The problem
588 seems to show up only with postgresql (to be verified).
589 kes Correct %x to %p in postgresql debug statement.
591 kes Fix bug #942 where lots of emails where generated when the heartbeat
592 interval was low and Bacula wanted a different tape from the one in
595 ebl Add new SD despooling attributes and Dir inserting attributes
596 job status codes in the catalog (Status table).
598 ebl Use qmake-qt4 instead of qmake when available (debian system).
600 kes Add a security warning to src/cats/make_catalog_backup.in indicating
601 that passing the password via the command line (arg 3) is insecure.
602 This responds to bug #990 (it doesn't fix it).
604 kes Set default debug_level to zero. This corrects bugs #991 and #993.
605 kes Fix a crash in bat when it cannot connect to the Director for example
606 if the Director is not running.
607 kes Remove redundant INDEX (JobId) from File table in the trunk.
609 kes Make explicit exception to GPL in LICENSE to permit linking
610 the Win32 FD with Microsoft VSS code.
611 kes Apply the Solaris package patch from
612 Masopust, Christian <christian.masopust@siemens.com>
613 kes Apply the patch to optionally add a timestamp in the debug output
614 submitted by Mariusz Czulada <manieq@wp.eu>.
616 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
617 backend (sql_strerror). Fixes bug #989
619 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
620 It applied with no problems.
621 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
623 kes Redirect stderror to stdin on mt status command in mtx-changer.in
624 since the status is returned on stderr on Solaris.
625 kes Activate Close button on tray-monitor window. This fixes
627 kes Check for NULL item in parse_conf.c before calling it. In the
628 case of Device, there is no item and this caused a seg fault when
629 Device appears in the conf file.
630 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
631 avoids pulling in config.h multiple times in some new code.
633 kes Fix spurious warning message printed when creating a volume with
634 a LabelFormat. This fixes bug #976.
636 Release Version 2.2.5
638 kes Add JobId in place of Job name in all the Jmsg() output.
639 kes Correct the APP_DESC for the Win32 storage service (remove an e).
641 kes Make maxvol-test and new more strict maxvol2-test work.
642 kes Print JobId in all Jmsg() job output.
644 kes Add new SD despooling attributes and Dir inserting attributes
645 job status codes. This fixes bug 961.
646 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
648 kes Fix doc issue. This fixes bug #963.
649 kes Fix listing performance problems in bat. Pointed out by
651 kes Remove old debug code.
652 kes Fix bat code that tests for Win32. This should fix bug #968
653 kes Query 5 list wrong Vol after migration. This fixes bug #960
655 ebl Fix #969 where user can't change Replace option in restore menu.
657 kes Save jcr in thread specific data (tsd) for each thread.
658 kes Make Dmsg() print JobId as -%u.
659 kes Make Jmsg, Emsg, and others automatically pickup the jobid
660 for the thread if it exists.
661 kes Remove old reservation debug jid code.
662 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
663 ebl Add an option that permit to specify spool size in job
664 definition. (Applying patches/testing/spoolsize_per_job.patch).
665 You must upgrade SD and DIR at the same time.
666 dvl Add new configuration item --archivedir
667 dvl Adjust regression tests to use tmp not /tmp. This will allow
668 multiple concurrent runs of the regression tests.
670 kes Fix race condition that drops final block written to volume.
671 This happens in rare cases with multiple simultaneous jobs
672 when the Volume fills. This fixes bug #964. May be related
673 to bug #935 and possibly #903.
674 kes Eliminate more strerror() and replace with bstrerror().
675 kes Remove BSD getopt and replace with unrestricted IBM version.
676 kes Fix Win32 build for changed calling sequences.
677 kes More tweaks to the mount volume routines to get everything
678 right. Changed variable name from find to have_vol, which is
679 much easier to understand.
680 kes Enhance btimer debug code.
682 kes Fix FD->SD authorization failure, which was due to spurious
683 wakeups from a pthread_cond_timedwait(). Simply check the
684 predicate before continuing. This fixes bug #953.
685 kes Add const char where needed (more to do). Remove temp debug code.
687 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
688 kes Don't overwrite error message in check_tables_version.
690 kes Unlock batch insert tables with same calls used elsewhere.
691 kes Allow starting 59 jobs a second.
692 kes Make SD session key more random.
693 kes Add retry for SQLite opening db if it fails. Probably helps
695 kes Suppress extra error messages during batch insert failure.
697 kes Add jcr to timer packets so if killed message can be sent to job.
698 kes Add JobId to all Dmsg() output.
699 kes Put some FD auth code on dbglvl rather than fixed.
700 kes Return insert attributes error message in db msg buffer to avoid
701 false error messages. Helps fix bug #966.
702 kes Separate batch init error messages. Probably helps fix bug #966.
703 kes Make SD code that contructs attribute insert check string lengths
705 kes If Dir gets an error during inserting attributes, cancel SD.
706 This reduces unnecessary error messages.
708 kes Correct search boolean for getting Volume info
709 ebl Cleanup batch insert code. Probably fixes bug #965.
710 kes Back out one small change to the reservation system (reserving a volume).
711 kes Rework how a Volume is mounted. It is now much more intelligent and
712 will always attempt to use any mounted volume if possible and reduces
713 calls to the Director asking about volumes.
715 kes Turn off some code when batch insert not enabled.
716 kes Edit FD name in connect error messages.
717 kes Rework the reservation system to take into account that the Director
718 might give us a Volume that is different from the current one being
719 used, and to ensure that we don't exceed Maximum Volume Jobs.
720 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
721 fatal error with multiple jobs running'
722 kes Add more debug code in reservation system.
723 kes Implement maxvol-test to check bug #947.
725 kes Add code to handle tray monitor separated from Win32 FD.
726 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
728 kes Add missed return in fixing verify bug -- trunk only.
729 ebl Fix a command parser issue causing a director segfault.
730 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
732 kes Increase the max block size to 4MB fixes bug #957.
733 kes ERABT if user sets min block size > max block size. Fixes bug #956.
734 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
735 is not properly mounted (recognized) during a poll.
736 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
737 Job that has differences reports Verify OK.
738 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
740 ebl Add an option to operate on all pools with update vol parameters.
741 This complete the project 20. Patch from Nigel Stepp.
742 ebl Add history support to bconsole when using readline.
743 Using Ctrl-D to exit doesn't update .bconsole_history
744 kes Modify new volume algorithm to use max MediaId for generating next
745 volume number rather than the count of Volumes. This should essentially
746 eliminate the failure rate if some volumes were deleted. Bug #921.
747 kes Begin implemention of Optimize Job Scheduling.
748 kes Implement restore callback that Dirk and I agreed on for bat
749 restore. This fixes bug #928. Restore of backup of zero files fails.
750 kes Fix SQL Catalog logging which broke with new db_escape_string
753 Release Version 2.2.4
755 kes Fix bacula_cats.def for new db_escape_string().
756 kes Increase size of name string when FD making connection to SD.
757 May fix bug #953. FD->SD connection failure.
759 kes Add code to help Dan debug 2drive-incremental-2disk test.
760 kes Add code to try to fix bug #908.
761 kes Add waits to multiple exit detection code to try to force pid
762 file to always be deleted.
763 kes Restore good dev.tar.gz to rescue set appropriate binary property.
765 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
766 trying to switch drives by checking for blocking before unblocking.
768 kes Cancel storage daemon in all cases where FD reports error. This
769 should fix virtually all cases of bug #920.
770 kes Fix db_escape_string() for MySQL which did not compile.
772 kes Fix error message that was clobbered when Dir tells SD it does not
773 have write permission on Volume. This should fix a minor point
774 in bug #942, but not the main problem.
775 kes Add code to cancel job in SD if FD connection fails. This should
777 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
778 dvl Pass jcr and db into db_escape_string() to enable better escaping
780 kes Fix migration code to get correct Volume name with multiple volumes
781 by skipping |. Fixes bug #936.
782 kes Implement patch supplied by Landon to fix bug #944 where using
783 TLS with bconsole uses 99+% of the CPU.
784 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
786 kes Move patches into patches directory.
788 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
791 ebl Using 'm' in bconsole will show messages like before,
792 and not memory usage.
793 kes Fix bug #935, and probably also bug #903 where files were not
794 restored. MediaId was not properly set in JobMedia record after
797 kes Suppress chown and chmod error messages if the FD is not running
800 kes Apply Martin Simmons' patch that should turn off the new API usage
801 when batch insert is turned off allowing building on older
803 kes Add ./configure search in qwt-qt4 for qwt package
805 kes Bacula is now free of 3rd party GPL copyrighted code!
807 kes Add guid_to_name.c/h which replace idcache.
808 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
810 ebl Detect if new PosgreSQL batch insert API is present.
811 kes Correct incorrect mempool call causing Director crash. Occurs on
812 systems without va_copy().
813 sb Update spec files for 2.2.1 release
815 kes Fix memory pool call in ua_output.c. bug #934.
816 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
817 Add test program to fnmatch.c
819 kes Integrate patch to README.vc8 from
820 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
821 edit it to get it into Unix patch format.
822 kes Implement mkpath.c to replace old FSF makepath.c
824 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
826 Release Version 2.2.1
828 kes Update POTFILES.in
829 kes Cleanup a few underquoted AC_DEFUNs in configure
830 kes Apply patch from Martin Simmons that adds a test for va_copy to
833 kes Fix bug #921 by increasing the number of tries to create a new volume
835 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
836 can be called multiple times. Implement a version for machines
837 without va_copy() that gets a big buffer.
839 kes Integrate more portable zone offset code into bsmtp.c
840 Submitted by Attila Fülöp.
842 kes Fix bad SD->FD return status reported by
843 (James Harper) <james.harper@bendigoit.com.au>
844 ebl Fix a bug in read_close_session which return random status
845 thanks to James Harper
847 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
848 and directory names during restore of single file/directories.
849 kes Add sanity checks to .sql command when string is empty. Hopefully
850 that will resolve Dirks Director crash.
852 kes Apply patch submitted by Martin Simmons that corrects a seg fault
853 in the bsmtp chat subroutine when debug is >= 10.
855 kes Fix Director crash when running bat SQL queries.
856 kes Add David's notes on Item 8: Copy pools.
858 kes Rework projects file to be current and ready for a vote.
859 kes Enhance lex scanner error message.
861 kes Tweak LICENSE file to mention BSD code.
862 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
863 if specified on the ./configure.
864 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
865 This class is intended to allow us to open a second bsock to the
866 Director while in the restore subdialog.
868 kes Fix configure to create bat Makefile before creating dependencies.
869 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
870 kes Add a tooltip to the tray monitor.
871 dvl Set the Director's PID file before dropping privs. This fixes
874 kes Update AUTHORs file
875 kes Increase the default max concurrent jobs to 20 in FD and SD to
876 correspond with the default .conf files.
877 kes Rewrite the Win32 service routines. This eliminates the 3 copies
878 some different, of the same file created by RN when porting the
880 kes Rearrange some of the Win32 directories and the placement of the files
882 kes Set DEVELOPER flag in version.h
884 ========================================================================
885 Release Version 2.2.0
887 kes Apply a second doc patch from Marc.
888 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
889 improves the tips section that discusses how to setup multiple
892 kes Update bat README file.
893 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
894 corrects a typo in the Recycle status check in db_find_next_volume().
895 This will probably fix a number of annoying problems with multiple
897 kes Modify most of dird/msgchan.c to use bsock class calls rather than
898 bnet calls -- no functionality change.
900 kes Modify the Verify output to specify if files are missing on
901 the Volume(s) or disk. Fixes confusion in bug #916.
902 kes When more than one Volume is read in a migration job, the last
903 Volume bytes reported are from the last read volume rather than
904 the last written volume. Fixed. This fixes bug #910.
905 kes Fix display of Recycle flag after update volume=foo recycle=yes.
906 It previously printed New Recyle flag is: no. This fixes bug
909 kes Correct seg fault when switching tape drives during restore.
910 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
911 be used until after 2.2.0 release.
913 kes Remove fnmatch() in SD that permitted wild card specifications.
916 kes Fix %g in filename returned by SQL for browse tree reported by
918 kes Fix configure so that it puts config.out in the cwd rather than
920 kes Attempt to fix the locking problem reported by Eric in bug #906.
921 kes Make berrno class to leave errno unchanged after constructor call.
922 kes Make bnet_server use the heap rather than the stack to allocate
923 its socket fd pointers to avoid a crash at termination. Problem
924 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
926 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
927 and putting it in depkgs-qt along with Qt4.3.
929 kes Rework code in acquire.c that switches drives for reading when
930 the Media Type does not match. This should fix bug #906
932 ebl Fix a director segfault during job setup #907
933 kes Correct seg fault in postgresql when first operation returns no
934 rows. Fixes Dirks File browser problem seg fault with bat.
936 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
937 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
940 kes Implement PopUp YES/NO dialog for bat.
942 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
944 kes Correct RunScript to terminate job in FD on failure.
945 kes Change abort_on_error and AbortJobOnError to fail_on_error
946 and FailJobOnError in RunScripts.
947 kes Minor tweaks of code formating in RunScripts, principally to
948 avoid depassing 80 columns.
950 kes Eliminate one #ifdef Win32 in bsmtp
951 kes Implement grow tool to grow a file for testing very large databases.
952 kes Add big-vol-test to test Bacula seeking with > 5GB.
955 kes Modify find_next_volume() to return all values in Media record.
956 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
960 kes Update Release notes
962 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
963 Warning, in previous beta version, all media get from scratch keep their
966 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
967 This should fix bug #842. Made a note to look at removing the temp
968 files at the end of the install.
969 kes Add ability to mount and unmount a file device providing it is
970 marked as being removable and has the appropriate mount and unmount
971 commands defined in the Device resource. This fixes bug #830.
972 kes When applying a storage override, release all previous storage
973 definitions rather than just prepending the new storage.
974 This should prevent a good deal of confusion.
976 kes Implement ./configure search for qwt libraries.
978 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
979 Win32 FD. This should fix bug #893.
980 kes Remove an unnecessary beep in Win32 init code.
981 kes Update copyright dates in Win32 executable about boxes.
982 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
983 code with a BSD getopt.c and getopt.h.
984 kes Remove sched.h from the Win32 compat directory -- not used.
985 kes Remove the Exit menu item from the Win32 tray monitor. If you really
986 need to shut it down, do it through the services panel or the command
988 kes Remove some inappropriate Bacula FSFE copyrights.
989 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
990 kes Fix regress config non-portable test as pointed out by
991 Florian Heigl <florian.heigl@gmail.com>
992 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
993 as pointed out by Florian Heigl <florian.heigl@gmail.com>
995 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
996 Reported by Frank Sweetser.
1000 kes Fix client-only build.
1001 kes Integrate client-only fixes for bsys (initgroups) and conio from
1002 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1003 kes Make arguments to get_scratch_volume() in same order as other
1005 kes Rework the prune_volumes() subroutine so that after purging and
1006 no volume found in desired pool, it will check for a scratch
1007 volume. This prevents recycling the whole scratch pool.
1008 kes Add code to status storage to print boffset_t (largefile support).
1010 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1011 kes You now need a --with-qwt=<dir> to be able to build bat.
1012 kes Update src/win32/cats/bacula_cats.def to include the new
1013 db_get_query_dbids() call on Win32.
1015 kes Correct a problem when selecting a scratch volume and moving
1016 it to another pool that lost some columns.
1017 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1018 kes Enhance Autochanger error messages to include Volume and device name.
1019 kes Rework prune_volumes() code to take account of InChanger flag,
1020 and to handle recycling volumes going to the Scratch pool and
1021 current pool because the RecyclePool directive.
1022 kes Implement a better and more efficient db_get_query_dbids() to
1023 handle creating and passing back a list of DBIds.
1027 kes Start work on new more efficient DBId subroutine. First use
1028 will be for recycling volume to Scratch inchanger.
1029 kes Increase number of JobIds in pruning from 1000 to 10000.
1030 This to be replaced by above routine.
1031 kes Begin implementation of building Qt4 on Win32.
1032 kes Correct typo in fix I added for bad TLS shutdown.
1033 kes Pull 2.0.3 patches into patches directory.
1034 kes Update Release notes. Include qt-console in line count.
1035 kes Update Projects file.
1037 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1038 bug in migration code where a job that spanned two volumes
1041 kes Implement new BST_DESPOOLING blocked state. Change from locking
1042 during despooling in SD to blocking. This means that other threads
1043 can work with the device structure, in particular the reservations
1044 system while despooling.
1046 kes Fix return in reservation message queue that missed clearing
1047 the jcr lock (implemented 26Jun07 below).
1048 kes Rename a number of dev methods to make locking function names
1050 kes Document locking in lock.c. Move lock structures to new file
1053 kes Move reservations message lock to lock jcr only this
1055 kes Move main SD locking code into lock.c (new file).
1056 kes Update Win32 build to include lock.c
1060 kes Dirk committed the qwt library code for drawing graphs in bat.
1061 kes Tweak install of qwt so that it is integrated with ./configure.
1063 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1064 out by Eric (my typo).
1065 ebl Fix configure.in to get batch mode enable
1066 kes Return correct string from authenticate.cpp in bat when connecting
1068 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1069 spurious line drops when using TLS.
1070 kes Do not file reparse points when restoring a file that already
1073 kes Implement Windows reparse points -- similar to directories, but
1074 we do not descend into it. This is a first cut. They seem to
1075 be backed up, but restore is not yet tested.
1076 kes Remove restore_blocking in tls code when shutting a socket to leave
1077 it in blocking mode. Hopefully this will fix the encryption bug
1078 reported by Frank Sweetser.
1079 kes When opening a file for backup, tell the OS that we are going to
1080 read it sequentially -- optimization.
1081 kes Change variable names in authenticate_director() to not conflict
1082 with member names in bat. Caused great confusion with compiler,
1085 kes Queue openssl error messages in case of comm problem.
1086 kes Do shutdown() call if socket terminated.
1087 kes Remove some duplicated code in tls.c
1088 kes Move more of the bsock member variables into private and access
1090 kes Add Frank Sweetser's tls-test to the regression suite.
1092 kes Add Swedish sv.po file
1094 kes Don't print clock skew message in FD if less than 3 seconds diff.
1095 kes Add a bit of VSS info to status client.
1096 kes Implement a first cut of Vista VSS, using Win2003 code.
1098 Release: 2.1.20 beta
1100 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1101 loaded tape but uses first drive).
1102 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1103 This was indeed a Win32 issue.
1105 kes Simplify search of autochanger for in-use Volume.
1106 kes Fix exit condition of check for in-use volume. kes Remove
1107 inappropriate my_postgresql_free_result() in db_close()
1109 kes Fix bad return in FD when encryption signature not found.
1110 Probably caused a crash.
1111 kes Inhibit missing encryption signature error messages for
1112 file types where no signature computed.
1113 kes Correct inverted check on autochanger in reservation system.
1114 kes Tweak debug code in autochanger reservation.
1116 kes Add some additional locking in the cats directory in subroutines
1117 that modify packet variables called from batch insert.
1118 kes Rework how dcrs are allocated. new_dcr() can now be called
1119 with an existing pointer, and it will simply clean it up.
1120 This allows the reservation system to test various different
1121 devices, and will permit easy device changes.
1122 kes A bunch of changes all over to handle new new_dcr() calling
1124 kes Work more on the Volume management in the SD. Remember Volumes
1125 for tape drives and for autochangers (even virtual disk changers).
1126 kes When looking at the Volume list to reserve a drive, handle
1127 autochanger names correctly by interating through the changer
1128 devices. Also call the Director to see if a Volume is suitable
1129 for the current job.
1130 kes Fix some bugs in bscan. Make sure all media records are written.
1131 Make sure that valid JobMedia records are written for disk files.
1132 Previously they were completely wrong.
1133 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1134 that the URLs don't change and so that the developers will all
1135 work off the same copy. Rebuild from scrach.
1136 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1138 Release: 2.1.18 beta
1140 kes Fix seg fault in FD from incorrect digest size.
1141 kes Fix argument to non-OpenSSL crypto.c subroutine.
1143 Release: 2.1.16 beta
1145 kes Remove a few malloc()s from the encryption code.
1146 kes Use the class calls to bsock in filed/backup.c and restore.c in
1147 place of the old bnet_xxx code.
1148 kes Implement code that does an on the fly calculation of the
1149 signing digest during restore of encrypted files. It makes
1150 a best guess at the algorithm, and if it is not correct, will
1151 then revert to the old code which reads the file after it is
1153 kes Implement at least one missing crypto stream in stream_to_ascii()
1154 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1155 #877 where a reload with bad syntax causes Dir to exit.
1157 Cut: 2.1.14 beta (not released)
1159 kes Do not free a volume on a tape drive until another volume is
1160 mounted and read, or the autochanger unloads the volume.
1161 This should help the SD re-use volumes that are already mounted,
1162 and should fix bug #886.
1163 kes Apply patch from user brettedgar that allows gnome2-console include
1164 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1165 kes Apply patch from Lucien Weller that fixes day of week calculation
1166 because of DST flag problem. Fixes bug #887.
1168 kes Move find_next_appendable_volume() to after acquiring a valid device
1169 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1171 kes Unable to reproduce bug 872. However added additional testing for
1173 kes Bug #874 resolved by documenting SQLite limitations.
1174 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1175 kes Bug #881 resolved by removing typo in mtx-changer script.
1176 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1177 approval. Added a link to the wiki on the web page, and implemented
1178 a backup from http://paramount.ind.wpi.edu
1180 kes Fix update allfrompool to pass pool name.
1182 kes Convert to pure GPL v2 license.
1183 kes Fix sscanf problems reported by Peter Buschman that caused
1184 a bus error on Solaris.
1185 kes Rework (simplify) the select prompt in bat.
1186 kes Move get_jobid_from_tid() into lib and create a
1188 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1189 should definitely fix the problem of lost error messages in the
1191 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1192 kes Eliminate tcpd.h from the project. Enclose the #include from the
1193 library with extern C ...
1194 kes Add print of signal name when a signal is trapped.
1196 Release: 2.1.12 beta
1198 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1200 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1201 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1202 makes SQLit3 run 30 times faster, though a bit less safe.
1203 kes Implement --with-batch-insert in configure and detection of thread
1204 safe libraries. It is on by default, but turned off if no thread
1205 safe library (e.g. SQLite 2) is available.
1207 kes Fix Bacula PostgreSQL buffer overruns.
1208 kes Do better checking for NULL results returned from PostgreSQL;
1209 implement retry for failed queries; clear results buffer after
1210 failed query. Hopefully this will correct the PostgreSQL failures.
1212 kes Implement algorithm to handle only one appendable volume with
1213 Prefer Mounted Volumes = no.
1214 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1215 returned from a query.
1216 kes Make volume lock recursive.
1217 kes Implement an additional volume reservation algorithm that
1218 starts by considering all reserved volumes then uses the
1219 old brute force algorithm of searching the resources to
1220 find a suitable device.
1221 kes Add new reservations debug code and refine the old code.
1222 kes Update the win32/dll/bacula.defs file.
1224 kes Tweak reservations algorithm to permit a few more cases, i.e.
1225 volume reserved, but on different drive, ...
1226 kes Enhance SD status to include Pool and Media Type for drive in a
1227 more readable format (a bit longer).
1228 kes Fix PostgreSQL double free.
1230 kes Minor refactoring of restore decryption code.
1231 kes Add code to smartall.c to detect double free of a buffer.
1233 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1234 so that bsmtp will create a correct email address (mailbox only).
1235 kes Modify 'memory' command so that the buffers are listed as 'In use'
1236 to avoid confusion with Orphaned buffers.
1237 kes I reworked the OpenSSL include/lib flags to be handled in
1238 the standard Bacula way, which should fix bug #863 concerning
1239 non-standard OpenSSL libraries.
1241 kes Implement Help Browser window for bat.
1242 kes Fix reload bug that reset StorageId to zero.
1244 kes Fix TLS #ifdefing when TLS turned off.
1245 kes Ensure that when labelling a tape with Slot=0 that InChanger
1247 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1249 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1250 add DISTINCT (required by PostgreSQL).
1251 kes Implement BSOCK authenticate_director() method. Eventually will
1252 authenicate all daemons.
1253 kes Move several more functions into the BSOCK class.
1255 kes Add code to tell the OS that we no longer need a cached
1256 file that we were reading. In findlib/bfile.c. Also,
1257 only cache files that we are reading. Thanks to
1258 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1259 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1260 kes Implement script to automatically generate cats and dll .def
1261 files for Win32 dll.
1262 kes Update README.mingw32 to include new .def file generation.
1263 kes Correct typo in UTF-8 error message as reported by:
1264 jhernandez <julianhernandez@gmail.com>
1265 kes Add additional sm_check() code on debug level 1.
1266 kes Set default debug level to 1.
1267 kes Trap SIGABRT in attempt to get traceback.
1269 kes Reduce bat connect timeout from 30 to 15 seconds.
1270 kes More restructuring and implementing BSOCK class in place of
1272 kes Remove a few unnecessary malloc() tests in crypto code.
1273 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1274 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1275 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1277 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1279 kes Fix Verify InitCatalog. The attributes were not pointing to the
1280 correct saved location.
1281 kes Implement message callback so that GUI is sure to get all
1282 daemon messages. Currently displayed in a dialog in bat.
1283 kes Ignore SIGUSR2 (Bacula timer) in bat.
1284 kes Apply regress patch from bug #859 to allow regress to work
1285 with Solaris compiler.
1287 kes Begin adding TLS support to bat.
1288 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1289 clean up lex.c and make it more readable.
1291 kes Move more bnet functions into the BSOCK class.
1292 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1293 kes Complete change of berrno strerror() method to bstrerror()
1295 Release: 2.1.10 beta
1297 kes Cleanup incorrect email addresses in bsmtp.
1298 kes Make bat display initial messages rather than discard them.
1300 kes First cut of adding .mod to the run command.
1301 kes Implement auto display of messages in bat.
1302 kes Enhanced preferences to allow all Bacula output to be
1305 kes Try to make bsmtp date routines more generic.
1306 kes Fixed bug #856 autochanger documentation.
1307 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1308 kes Add new cats entry point so Win32 builds.
1310 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1312 kes Do better checking for the MySQL 64 bit libraries looking for both
1313 .a and .so libraries.
1314 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1315 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1316 kes Require the thread safe version of MySQL during configure. Thanks
1317 to Andre Noll for pointing this out.
1318 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1319 continuing in migration code.
1320 kes Apply implementation of tray-monitor font derived from gnome-console
1321 submitted by Andreas Piesk <a.piesk@gmx.net>
1323 kes Eliminate important memory loss in SQLite
1324 kes Fixed the batch insert MySQL thread specific data that was not
1325 being freed. See cats/mysql.c:db_thread_cleanup().
1326 kes Fix restore before command.
1327 kes Convert old hdr.name to name() in a few places.
1328 kes Implement update jobid command.
1329 kes Return all time_t dates in db_get_job_record()
1330 kes Stop watchdog in SD earlier.
1331 kes Put Pool just after Storage in please mount message.
1332 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1335 kes Update the po files.
1336 kes Fix Verify InitCatalog by making it cache attributes.
1338 kes Change name bacula-bat to bat for man 1 page to correspond to
1340 kes Check for client and store NULL pointers in status command. This
1342 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1343 kes Fix sign extended editing of %p.
1344 kes Clean out a little old #ifdefing in cats/mysql.c
1346 kes If time diff between DIR and FD is more than 600 seconds convert
1347 INFO message to WARNING.
1348 kes Implement heap size display in status for all daemons.
1349 kes Attempt to fix MySQL db open memory loss (not successfull).
1350 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1351 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1352 Query. This looks like a MySQL but but by doing extra releases,
1353 the memory goes away. This should fix bug #847.
1355 kes When backup fails, cancel SD before waiting for sd termination.
1356 kes If SD is waiting for FD to connect during cancel, wake up the
1358 kes Fix fsf code so that errno is correctly reported.
1359 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1361 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1362 so that Bacula doesn't later stumble into a seg fault.
1363 kes Use the term Restore Client in the restore Job report.
1364 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1365 the original job's FileSetId.
1366 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1367 spooling in migration jobs. Not yet tested.
1368 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1369 reading conf file from a pipe. However, do it with open_bpipe()
1370 rather than popen. Not yet tested.
1372 kes Fix an ugly bug where the VolCatBytes were getting updated
1374 kes Implement bconsole memory command that prints current memory
1375 usage, plus smartalloc dump.
1376 kes Clarify some error messages in backup, admin, and migrate.
1377 kes Shrink label dialog to smaller size.
1378 kes Invert Cancel OK buttons on restore to be OK Cancel.
1379 kes More strerror() to bstrerror() conversions.
1381 kes Start implementing bstrerror() in place of strerror().
1382 kes Stripping path -- seems to work.
1384 kes Prevent door and port files from being restored (mostly
1386 kes Free an unreleased buffer in compat code.
1387 kes Change console Job name from *Console* to -Console- to eliminate
1388 Win32 filename problems. Put Win32 path separator when creating
1389 Console file. This fixes bug #846.
1390 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1392 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1394 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1395 to force Win32 error message.
1397 kes First cut strip path. The data should be passed to the FD,
1398 but nothing is done with it yet.
1399 kes Enhance the digest and signature routines in the crypto
1400 library to accept a JCR and to use it to print error messages
1401 so that they will go in the Job report rather than the daemon's
1403 kes Simplify some of the verify signature code.
1404 kes Simplify a few of the alternative returns in the signature
1407 ebl Use only POSIX regex instead of GNU regex in breg.c for
1408 File relocation. It fix broken freebsd compilation.
1409 kes Convert all other Dir files to use new ua class message
1411 kes Tentative fix for missing digest signature in bug 807.
1412 kes Correct handle problem in new win32_ftruncate routine.
1413 kes Convert ua_purge.c and ua_update.c to use new ua class
1414 message routines for bat.
1416 kes Correct incorrect installation of LICENSE in Win32 installer.
1417 kes Display LICENSE at the beginning of the Win32 install.
1418 kes Attempt to correct the need for the png files to be installed
1420 kes Reapply my bat.conf install script in qt-console. I think I
1421 editted bat.pro instead of bat.pro.in and it was lost.
1422 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1423 the /var/lock/subsys for subsysdir. Also corrects typos in the
1426 kes First cut update job.
1427 kes Correct configure to include qmake of src/qt-console directory.
1429 kes Make restore job yes/mod/no print in one command so GUI works.
1430 kes First cut implementing backup and restore client.
1431 kes Correct editing in Verify output that caused a seg fault.
1433 kes Insure that bat.conf is not overwritten during installation.
1434 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1435 while I was implementing migration in March 2006 !
1437 ebl Cleanup file relocation, using char *RegexWhere instead of
1438 char *where + bool where_use_regexp
1439 kes Update some manpages and add bat manpage.
1440 kes Make a first cut at converting bacula.spec.in for bwx-console
1442 kes Apply patch from John Goerzen to add hostname as fourth argument
1443 to make_catalog_backup script.
1444 kes Fix typos I introduced into bsmtp.c
1445 kes Make pm_strxxx() routines handle input of NULL pointer. This
1446 is to protect from NULL pointers returned from SQL databases.
1447 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1448 kes Add more debug to FIFO code -- fix fifo regression test.
1450 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1451 kes Add thread timer to bnet_connect() to break from OS if wait time
1454 kes Update Win32 build to include new files, new symbols, and
1456 kes Implement socket level heartbeat (tcp_keepidle)
1457 ebl Commit File relocation patch
1458 kes Make bat have 'make install' target.
1459 kes Warn during install if old gnome-console binary found.
1460 kes Warn during install if old wx-console binary found.
1461 kes Add -8 option to bsmtp command line to add content type utf-8.
1462 Fixes bug #809. (Character coding problem in bsmtp).
1463 kes If < is found in target (from, to, cc) then do not enclose the
1464 target in < > in bsmtp. Fixes bug #772 (malformed address).
1465 kes When printing certain items in dbcheck, stop after 300000.
1466 Fixes bug #822. (dbcheck loops).
1467 kes Incorrect status in Dir after waiting for mount with poll set.
1470 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1472 kes Print waiting to reserve a device every 5 mins.
1474 kes Don't call close_part in label.c if tape and relabel.
1475 kes Don't free volume if busy in close() -- should help with
1477 ebl Fix #824 RunScript bug (After script could be execute twice)
1478 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1479 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1480 Add a regression script to test RunScript
1482 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1485 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1486 deprecated. No additional bugs will be fixed, and they will be dropped
1487 in a future release (probably 2.4.0).
1488 kes Change name of wx-console to bwx-console to make it more Bacula
1490 kes Change the name of gnome-console to bgnome-console to make it
1493 kes Some time in March, a Feature Request with patch from Jorj Bauer
1494 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1496 The ability for the director to validate a Client (FD) CN against
1497 an arbitrary set of patterns rather than the hostname, with
1498 A new 'TLS Allowed CN' set of directives which are implemented
1499 in the Client resource. Then pattern matching is used in place
1500 of hostname matching against the Certificate's CN. As an example, we
1501 have certificates which (a) use a local CA, and (b) have a CN of the
1503 kes Add new/changed entry points to Win32 build
1504 kes Create unaccepted-projects for projects that are not accepted.
1505 kes Simplify locking in the reservations system.
1506 kes Add more debug code in reservations.
1507 kes Make sure error condition on reserving a volume is handled correctly.
1508 kes Correct handling of volume_in_use.
1509 kes Correct handling of initializing a device.
1510 kes Move handling of broadcasting releasing a device into release_device().
1511 kes Correct attaching dcr to dev so that it is only done if device
1512 is properly initiated.
1514 kes Locking debug level tweaks in SD.
1515 kes Tweak new Volume code.
1517 kes Add exec external-command [wait-seconds] to bconsole. This
1518 executes the external-command. Note! normally external-command
1519 should be enclosed in double quotes.
1520 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1521 it should normally be off in a production system.
1523 kes Implement die command for SD so that we can force it to dump.
1524 kes Implement SD lock debug code.
1525 kes Implement new algorithm for keeping Volume list in SD. It
1526 is now owned by the device.
1528 kes Implement new code for freeing in use volumes that should
1529 resolve if not all, some of the problems of multiple drive
1530 tape conflicts described in bug 801.
1532 kes Fix gui/bacula-web/images files in svn.
1533 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1535 ebl Fix a bug in batch mode (in string escape)
1536 kes Correct migration prune SQL typo that crept in in a
1537 recent 2.1.x change.
1539 kes Move bnet_despool() into class in bsock.c
1540 kes Modify job report to include director name and Build OS.
1541 kes Move drop root privilege and check_catalog() before fork.
1542 kes Add update database scripts (version 9 to 10) to updatedb directory.
1544 ebl Check size and age of each file after its backup to see if
1545 it has changed during backup, if 'checkfilechanges' is set.
1546 The FD will do an extra check (stat(2)) after
1547 each file backup. mtime, ctime and size are compared with
1548 'before backup' information. If time or size mismatch, an
1549 error message will be generated. You must upgrade FD to use it.
1551 kes Make database name and user configurable
1552 --with-db-name=xxx --with-db-user=xxx
1553 kes Add back database type to message.c for debugging.
1555 kes Implement dir_sql() which issues an SQL query.
1556 kes Modify bat medialist to use dir_sql() and do some minor C++
1557 formatting as well as eliminating a number of pointers, simplifing
1560 kes Fix some of the mtx-changer grep commands for tape label readers.
1561 kes Convert a number of bsendmsg into the appropriate send/warning/error
1562 message class calls.
1563 kes Suppress the using database message in the .sql command.
1564 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1566 kes Add context menu for floating a window.
1567 kes Some minor cleanup and name changes in qt-console
1568 kes Add doing mt setblk 0 in Win32 mtx-changer.
1569 kes Apply Martin's bug fix to move definition of ENODATA for
1571 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1572 sqlite2 and sqlite3.
1574 kes More pruning cleanup.
1575 kes Turn on wait_for_drive by default in mtx-changer.
1576 kes Turn on Batch insert code by default as it now passes regression.
1577 kes Add ./configure --enable-bat to enable building of Bat.
1578 No install yet though.
1580 kes Implement a new .sql command for bat.
1581 kes Implement code to turn off pruning in obtaining the next volume.
1582 Pruning is turned off for the status dir command, but turned on
1583 for SD requests and for the list nextvolume command.
1585 kes Correct Qmsg() that was not updated correctly when committing a
1586 previous change (probably the recent TLS patch).
1588 kes Write new subroutine is_volume_purged() that explicitly checks
1589 if the Volume is purged, and if so marks it as such. This should
1590 resolve problems reported about needing to mount twice to recycle
1592 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1593 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1594 amount of duplicated code.
1595 kes Do volume pruning only for the Media Type desired (reduces pruning time
1596 if multiple Media Types are in the same pool).
1597 kes Implement more detailed info in the Job report for the Bacula version
1599 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1601 ebl Add bbatch tool to bench database and insert mode.
1602 Fix sql quote stuff in batch mode
1603 Fix sql stuff for mysql
1605 kes Correct problems with am/pm scheduling. Fixes bug #808.
1606 kes Implement new prunning code that prunes up to 1000 jobs at
1607 the same time. The same technique can be applied to a number
1608 of other prune/purge subroutines.
1609 kes Add an insanity check when starting a new tape job to ensure
1610 that the tape position has not been changed. If so fail the
1612 kes Fix Win32 build for dlls to add the folllowing:
1613 src/lib/bsock.c -- new file with new entry points
1614 src/lib/dlist.c -- new entry points
1615 src/cats/sql_create.c -- new entry point
1616 src/cats/sql_cmds.c -- new DATA item exported
1618 ebl batch mode cleanup bscan-test is ok now.
1619 kes Implement SD code to check length of disk volume before appending.
1621 kes Correct return status on db_batch... routines.
1622 kes Add call to db_write_batch_file_records() to migration code.
1623 ebl Fix AfterJob timing
1624 kes Move the checking of the database in initializion of the Director
1625 to after we drop privileges. This avoids the need for both root
1626 and bacula access to the DB.
1627 kes Correct a misplaced variable definition in src/filed/backup.c
1628 kes Correct how the new batch insert db_create_attributes_record()
1629 uses the arguments. Caused a seg fault in bscan.
1630 kes Implement lock() and unlock() methods in DEVICE class.
1631 Implement block() and set_block(xx) methods in DEVICE class.
1632 kes Modify bnet_connect() so that it uses time() to check for the
1633 wait time expiring (on some OSes, some system calls may not
1634 return immediately).
1635 kes Modify Verify to obtain the previous JobId when it is actually
1636 running rather than at schedule time (as it was in 1.38.x).
1637 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1639 kes When checking pid in pid file, continue running if the pid is
1640 the same as ours. This occurs on IRIX after a system crash.
1643 kes Extend new GUI API.
1644 kes Make the ua structure a class, and implement send_msg(),
1645 error_msg(), warning_msg(), and info_msg().
1647 kes Apply fix from for building wx-console on the Mac from
1649 kes Implement new select mechanism for GUI programs.
1650 kes Reorganize initialization of stackedWidgets in bat.
1652 kes Add updated nagios plugin supplied by Christian Masopust.
1654 kes More bat implementation.
1655 kes File migrate bug with Pool Occupancy using mediaid instead
1656 of jobids. Fixes bug #795.
1657 kes Fix orphaned buffers in filed backup and verify due to
1658 crypto buffers not freed during errors. Fixes bug #789.
1659 kes Extend new GUI api code to tree commands.
1660 kes Ensure that tree and dot commands check console ACLs.
1661 kes Permit marking directory with trailing slash.
1662 kes Allow 20 console connections (instead of only 10).
1664 kes Add smartctl call to bacula-sd.conf as an example of getting
1667 kes Modify jobq.c to let simultaneous restore jobs run. This may
1668 cause them to fail if they cannot get a drive.
1669 kes Add Client Connect Wait to Storage daemon to permit users to
1670 modify the time the SD waits for a FD connection.
1672 kes Correct virtual changer check which was backwards. This caused
1673 volumes to be unloaded into slots already occupied.
1675 kes Apply Command ACL filter to JobId list in restore command.
1676 kes Correct typeo in var.c patch.
1678 kes Don't let Bacula prune File or Job records for the current Job.
1679 kes Fix variable substitution pad + inc bug reported (with patch)
1682 kes Correct SQLite log table index as reported by Luca Berra.
1684 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1686 kes Begin implementing new comm signals for API.
1687 kes Fix a few places in lib/message.c where the open fd may
1689 kes Continue implementing lib/bsock.c (real class). Make jcr,
1690 who, host, and port private. There are new methods to access
1691 them for non-class use. This required touching a number of files.
1693 kes Add LANG=C to autoconf/randpass so it works with languages other
1694 than English. Fixes bug #788.
1696 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1698 You will not be able to generate Include/Exclude list any more.
1699 It will be fixed soon.
1700 If you want to use this, you can apply
1701 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1703 kes Restore of sockets created false error messages because Bacula
1704 no longer restores sockets, but the code was still trying to
1705 set the attributes on a non-existent file. Reported by a user.
1706 ebl finish RecyclePool feature
1707 Media will takes Pool.RecyclePool
1708 when moving from Scratch to a Pool or when user will do
1709 update volume=xxx frompool
1710 To use it, add RecyclePool = aPool to your Pool resource
1713 RecyclePool = Scratch
1717 kes Expand new BSOCK class adding signal() and new BNET signals.
1718 kes Begin enhancing the dot commands adding a new API function
1719 that returns more information and will make it easier
1720 to interface to the Director from a program.
1722 kes Make DEVICE fd private. Its new name is m_fd, and can be
1723 obtained with dev->fd() outside the class. This is the
1724 first of many DEVICE members to be made private.
1725 kes Implement Michael Renner's idea on having a virtual disk
1726 changer. I made some minor modifications (e.g. I did not
1727 implement the Virtual Changer directive, but simply set
1728 the Changer Command to an empty string.
1730 kes Implement a BSOCK send() method that writes the whole record
1731 in a single write() request rather than in two.
1732 ebl add update volume=xxx recyclepool=yyyy
1733 volume takes recyclepool from pool when using update volume=xxx from pool
1735 kes Fix encryption deblocking bug, which caused some restored files
1736 to be truncated. This fixes bug #763.
1737 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1738 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1740 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1741 ebl Use btime_t instead of uint64_t in media patch.
1743 kes Optimize the use of the database a bit in the Status dir command.
1744 Only open it when needed, ensure that if any previous database
1745 was opened, it is closed.
1747 kes Correct VolCatBytes bug from media patch.
1748 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1749 in the case of orphaned records.
1750 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1751 and File records in 300K chunks to be more efficient. This
1752 idea came from Juan Luis Frances (if I remember right).
1753 kes Apply Eric's scratch patch that moves a purged Volume to
1754 the RecyclePool. Question: how is RecyclePool set? what
1755 happens to the ScratchPool?
1756 kes Apply Eric's media patch that collects read/write media
1757 times as well as byte counts. This patch requires a
1758 simultaneous upgrade of the DIR and SD. Note, there
1759 should be some way to turn off timing. I'm not sure
1760 times are in Bacula units.
1761 kes Apply Eric's batch-insert patch.
1763 kes Update projects list.
1765 kes Implement Include/Exclude file lists in FD as dlists using
1766 the new dlistString class. This permits efficiently having
1767 large include/exclude lists and completes project Item 25.
1768 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1769 console is authorized to cancel the job. This fixes bug
1771 kes Modify SD so that the VolCatJobs medium record is updated
1772 at the beginning of a Job rather than the end. This
1773 fixes bug #775 where exceeding MaxVolJobs caused jobs
1775 kes Added a mutex around getting and setting Volume information
1776 so that multiple simultaneous jobs will single thread.
1778 Switch to using Subversion
1779 kes Remove src/pygtk-console/ from configure
1781 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1782 plus the entrypoints.
1783 kes Apply patch supplied that corrects debug print
1784 in canceling jobs for max run time. Supplied as
1785 part of bug #621, which was previously fixed.
1787 kes Test on job_canceled() and sd_msg_thread_done inside
1788 loop starting the message thread to avoid a race condition.
1790 kes Remove rl_catch_signal from console.c as it conflicted
1791 with the header definition. Fixes bug #765.
1792 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1794 kes Clarify some stored/acquire messages to indicate if the
1795 problem is with read or append.
1797 kes Fix memory leak with storage ids in cats/sql_get.c
1798 kes Terminate watchdog earlier to avoid reference to released
1799 memory -- reported by Jason Austin.
1800 kes Move closing the database from jobq.c to the director daemon
1801 termination routine. This fixes memory leaks for shadow jobs
1802 (i.e. migration jobs).
1803 kes Free up the unique jobid chain items in migrate.c. This fixes
1804 a memory leak problem.
1805 kes Convert some ugly looking for statements to use foreach_alist
1806 in findlib/find.c. This will facilitate converting the structures
1807 to use dlist (for large include/exclude lists).
1808 kes Fix a bug in the btree.c and btree.h routines, then rename them
1809 rblist and add them to be built in src/lib. Include some new
1810 methods written by Rudolf Cejka that make the code more readable
1811 (hides some of the ugly casting).
1812 kes Add set_next() and set_prev() methods which make the code much more
1813 readable. Also add a new dlistString class that facilitates storing
1814 strings in dlists. To be used in the large include/exclude lists.
1815 kes Make some trivial modifications to lib/tree.h that use rblist
1816 rather than dlist for storing the tree links. This was suggested
1817 by Rudolf Cejka. The result of this is that the restore tree now
1818 uses red-black binary trees rather than simple linked lists. This
1819 should give rather dramatic speed improvements for directories
1820 contining large numbers of directories/files (more than 10000).
1822 kes Fix maxruntime bug #621.
1824 ebl Implement the include JobID in spool file name project.
1825 kes Reorder projects file in order determined by Jan 2007 vote.
1826 kes Implement item #12 on project list -- quick release of FD by
1828 kes Fix open of SQLite3 db where user does not have write permission
1829 so that DIR does not crash. Fixes bug #761.
1831 kes Add back missing @ in Win32 Makefile.
1832 kes Change 'Device not configured to autolabel' from INFO
1834 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1835 which should restart an indefinite # of times.
1836 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1837 other DIR specifications.
1839 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1840 Fix path quoting in SQLite scripts.
1841 Fix problems with SHGetFolderPath.
1843 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1845 kes Fix Job restart on error bug that promotes an Inc to a Full
1846 backup. This should fix bug #755.
1847 kes Add qt-console and first cut of code.
1851 kes Fix Bacula->Documentation link on Win32 to point to index.html
1852 instead of bacula.html. Fixed bug #750.
1853 kes Return JobId in db_get_job_record() when JobId==0. This should
1855 kes Do not release source pointers when restarting a failed job.
1857 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1858 This *should* fix bug #747.
1859 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1862 kes Modify USTORE constructor to set an empty store_source string,
1863 and don't copy the store_source string in a cancel. Hopefully
1864 this will fix Arno's seg fault, bug #744.
1865 kes Add back code to disable conio in configure. Fixes bug #743.
1866 kes Correct the Options scanner in the FD to correctly handle
1867 SHA1 option, which was eating the next option. Reported by
1869 kes Add code to indicate when the SD is spooling, spool wait, and
1870 despooling as requested by Alan Brown.
1872 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob