1 Technical notes on version 2.3
5 ebl Fixes #1034 which cause mysql to hang the connection after 8h
6 ebl Change default statistics target of filename.name and path.path
7 fields for PostgreSQL. This speeds lookup by indexes. Thanks
9 kes A few more tweaks to new reservation code. Make sure to clear
10 vol released flag when retaking volume. When reading label and
11 label is bad mark volume unused. When recycling, mark volume
12 unused so it can be renamed.
14 kes Fix reserve_volume() so it doesn't release a volume in use
15 (i.e. a volume entry not marked released). This should be
16 the last part needed to fix bug #1018.
18 kes Fix existing switch drive SD code to call autochanger to release
19 any old volume. This must be done to keep the autochanger from
20 releasing subsequently newly reserved volumes in doing a close().
21 This should fix bug #1018.
22 kes Fail if attempting to get console input in batch mode. This
23 should help fail RunScript console commands that are incomplete.
24 kes First cut implementing switch_drive() in SD (not actually called).
26 kes Implement first cut running console commands in a RunScript.
28 ebl Fixes bug #1028 where "Selection Type" option was not usable
30 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
33 kes Add new free_tls() entry point so that Win32 builds.
34 kes Fix compile warning in src/lib/util.c
35 kes Fix entry point for edit_job_codes() so that Win32 builds.
36 kes Fix seg fault Frank Sweetser reports in regression testing
37 on his systems. The problem was that the original author of
38 bsnprintf.c did not take into account the side effects of
39 using ++x in the argument to a #define.
40 kes Make SD protocol backward compatible with version 2.2.x.
42 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
43 because Bacula no longer restores sockets.
44 ebl Always use ignorecase fileset option on win32 FD.
46 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
47 that implements double quoting include names in conf files,
48 and also allows piping input by having the first character
49 be a vertical bar (|).
50 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
51 that implement %f in RunScripts to pass the FileSet name.
52 kes Skip leading | when lex input comes from a pipe as suggested
53 by Michael Stapelberg <michael@stapelberg.de>.
55 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
56 Nerijus Baliunas <nerijus@users.sourceforge.net>
58 kes Implement Plugin Directory and plugin events.
60 kes Implement a security enhancement: TLS authentication but no
61 encryption. Enabled by setting 'TLS Authentication = yes'.
62 Note when this is on, TLS encryption is turned OFF!
64 kes This patch corrects a problem where the maximum concurrent storage
65 jobs counter gets out of sync during restore jobs causing jobs to
66 'wait on max Storage jobs'. This patch fixes bug #1009.
68 kes This patch fixes bcopy so that it produces correct Volumes.
70 kes This patch eliminates spurious output to the console during a VerifyVolume
71 job that contains encrypted data. It fixes bug #1024.
73 kes This patch prevents the 'status dir' command from trying to use a scratch
74 volume and possibly moving it from one pool to another. This patch fixes
77 kes Add new include to postgresql.c suggested by Marc Cousins so
78 that it compiles correctly with pgre version 8.3.
80 kes Fix --archivedir addition to configure. Replace it with
81 --with-archivedir in configure.in This fixes the regression
83 kes This patch fixes bug #1012 where the job is canceled because
84 of Max Run Time exceeded when the job has not yet started.
86 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
87 one 'part' to write. Instead of each part being stored on disk,
88 written to DVD, then deleted from disk, all parts are written to disk,
89 and only the last is written and deleted from disk.
90 kes This patch fixes the status command to include the formating string for
91 JS_AttrInsterting. It fixes bug #1021.
92 kes This patch should fix the Mac OS X build problem on the latest
93 Darwin, where sys/types.h was not included correctly (apparently
94 due to a change in the Mac headers). The solution was to explicitly
95 ensure that it is defined for the ./configure.
96 This patch also has a rebuild of configure that includes the Debian
97 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
98 kes This patch should ensure that queued messages to the console are
99 displayed as soon as possible. It should fix bug 1007, but has been
100 reported not to work.
102 kes This patch fixes the infinite loop when trying to increase the
103 maximum number of volumes in a Pool during the add command.
104 This patch fixes bug #1008.
106 Release Version 2.2.6
108 db Remove extra data on estimate command in joblist for bat.
110 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
111 really change anything, but is the beginning of doing it *right*.
112 To do it completely right the LastWritten date must be passed to
113 the SD, but it is not yet done.
114 kes Minor tweaks to some bat restore SQL.
115 kes This patch fixes bug #1003 where putting the message output from
116 a Verify job into the catalog results in a recursive loop. The problem
117 seems to show up only with postgresql (to be verified).
118 kes Correct %x to %p in postgresql debug statement.
120 kes Fix bug #942 where lots of emails where generated when the heartbeat
121 interval was low and Bacula wanted a different tape from the one in
124 ebl Add new SD despooling attributes and Dir inserting attributes
125 job status codes in the catalog (Status table).
127 ebl Use qmake-qt4 instead of qmake when available (debian system).
129 kes Add a security warning to src/cats/make_catalog_backup.in indicating
130 that passing the password via the command line (arg 3) is insecure.
131 This responds to bug #990 (it doesn't fix it).
133 kes Set default debug_level to zero. This corrects bugs #991 and #993.
134 kes Fix a crash in bat when it cannot connect to the Director for example
135 if the Director is not running.
136 kes Remove redundant INDEX (JobId) from File table in the trunk.
138 kes Make explicit exception to GPL in LICENSE to permit linking
139 the Win32 FD with Microsoft VSS code.
140 kes Apply the Solaris package patch from
141 Masopust, Christian <christian.masopust@siemens.com>
142 kes Apply the patch to optionally add a timestamp in the debug output
143 submitted by Mariusz Czulada <manieq@wp.eu>.
145 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
146 backend (sql_strerror). Fixes bug #989
148 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
149 It applied with no problems.
150 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
152 kes Redirect stderror to stdin on mt status command in mtx-changer.in
153 since the status is returned on stderr on Solaris.
154 kes Activate Close button on tray-monitor window. This fixes
156 kes Check for NULL item in parse_conf.c before calling it. In the
157 case of Device, there is no item and this caused a seg fault when
158 Device appears in the conf file.
159 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
160 avoids pulling in config.h multiple times in some new code.
162 kes Fix spurious warning message printed when creating a volume with
163 a LabelFormat. This fixes bug #976.
165 Release Version 2.2.5
167 kes Add JobId in place of Job name in all the Jmsg() output.
168 kes Correct the APP_DESC for the Win32 storage service (remove an e).
170 kes Make maxvol-test and new more strict maxvol2-test work.
171 kes Print JobId in all Jmsg() job output.
173 kes Add new SD despooling attributes and Dir inserting attributes
174 job status codes. This fixes bug 961.
175 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
177 kes Fix doc issue. This fixes bug #963.
178 kes Fix listing performance problems in bat. Pointed out by
180 kes Remove old debug code.
181 kes Fix bat code that tests for Win32. This should fix bug #968
182 kes Query 5 list wrong Vol after migration. This fixes bug #960
184 ebl Fix #969 where user can't change Replace option in restore menu.
186 kes Save jcr in thread specific data (tsd) for each thread.
187 kes Make Dmsg() print JobId as -%u.
188 kes Make Jmsg, Emsg, and others automatically pickup the jobid
189 for the thread if it exists.
190 kes Remove old reservation debug jid code.
191 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
192 ebl Add an option that permit to specify spool size in job
193 definition. (Applying patches/testing/spoolsize_per_job.patch).
194 You must upgrade SD and DIR at the same time.
195 dvl Add new configuration item --archivedir
196 dvl Adjust regression tests to use tmp not /tmp. This will allow
197 multiple concurrent runs of the regression tests.
199 kes Fix race condition that drops final block written to volume.
200 This happens in rare cases with multiple simultaneous jobs
201 when the Volume fills. This fixes bug #964. May be related
202 to bug #935 and possibly #903.
203 kes Eliminate more strerror() and replace with bstrerror().
204 kes Remove BSD getopt and replace with unrestricted IBM version.
205 kes Fix Win32 build for changed calling sequences.
206 kes More tweaks to the mount volume routines to get everything
207 right. Changed variable name from find to have_vol, which is
208 much easier to understand.
209 kes Enhance btimer debug code.
211 kes Fix FD->SD authorization failure, which was due to spurious
212 wakeups from a pthread_cond_timedwait(). Simply check the
213 predicate before continuing. This fixes bug #953.
214 kes Add const char where needed (more to do). Remove temp debug code.
216 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
217 kes Don't overwrite error message in check_tables_version.
219 kes Unlock batch insert tables with same calls used elsewhere.
220 kes Allow starting 59 jobs a second.
221 kes Make SD session key more random.
222 kes Add retry for SQLite opening db if it fails. Probably helps
224 kes Suppress extra error messages during batch insert failure.
226 kes Add jcr to timer packets so if killed message can be sent to job.
227 kes Add JobId to all Dmsg() output.
228 kes Put some FD auth code on dbglvl rather than fixed.
229 kes Return insert attributes error message in db msg buffer to avoid
230 false error messages. Helps fix bug #966.
231 kes Separate batch init error messages. Probably helps fix bug #966.
232 kes Make SD code that contructs attribute insert check string lengths
234 kes If Dir gets an error during inserting attributes, cancel SD.
235 This reduces unnecessary error messages.
237 kes Correct search boolean for getting Volume info
238 ebl Cleanup batch insert code. Probably fixes bug #965.
239 kes Back out one small change to the reservation system (reserving a volume).
240 kes Rework how a Volume is mounted. It is now much more intelligent and
241 will always attempt to use any mounted volume if possible and reduces
242 calls to the Director asking about volumes.
244 kes Turn off some code when batch insert not enabled.
245 kes Edit FD name in connect error messages.
246 kes Rework the reservation system to take into account that the Director
247 might give us a Volume that is different from the current one being
248 used, and to ensure that we don't exceed Maximum Volume Jobs.
249 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
250 fatal error with multiple jobs running'
251 kes Add more debug code in reservation system.
252 kes Implement maxvol-test to check bug #947.
254 kes Add code to handle tray monitor separated from Win32 FD.
255 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
257 kes Add missed return in fixing verify bug -- trunk only.
258 ebl Fix a command parser issue causing a director segfault.
259 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
261 kes Increase the max block size to 4MB fixes bug #957.
262 kes ERABT if user sets min block size > max block size. Fixes bug #956.
263 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
264 is not properly mounted (recognized) during a poll.
265 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
266 Job that has differences reports Verify OK.
267 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
269 ebl Add an option to operate on all pools with update vol parameters.
270 This complete the project 20. Patch from Nigel Stepp.
271 ebl Add history support to bconsole when using readline.
272 Using Ctrl-D to exit doesn't update .bconsole_history
273 kes Modify new volume algorithm to use max MediaId for generating next
274 volume number rather than the count of Volumes. This should essentially
275 eliminate the failure rate if some volumes were deleted. Bug #921.
276 kes Begin implemention of Optimize Job Scheduling.
277 kes Implement restore callback that Dirk and I agreed on for bat
278 restore. This fixes bug #928. Restore of backup of zero files fails.
279 kes Fix SQL Catalog logging which broke with new db_escape_string
282 Release Version 2.2.4
284 kes Fix bacula_cats.def for new db_escape_string().
285 kes Increase size of name string when FD making connection to SD.
286 May fix bug #953. FD->SD connection failure.
288 kes Add code to help Dan debug 2drive-incremental-2disk test.
289 kes Add code to try to fix bug #908.
290 kes Add waits to multiple exit detection code to try to force pid
291 file to always be deleted.
292 kes Restore good dev.tar.gz to rescue set appropriate binary property.
294 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
295 trying to switch drives by checking for blocking before unblocking.
297 kes Cancel storage daemon in all cases where FD reports error. This
298 should fix virtually all cases of bug #920.
299 kes Fix db_escape_string() for MySQL which did not compile.
301 kes Fix error message that was clobbered when Dir tells SD it does not
302 have write permission on Volume. This should fix a minor point
303 in bug #942, but not the main problem.
304 kes Add code to cancel job in SD if FD connection fails. This should
306 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
307 dvl Pass jcr and db into db_escape_string() to enable better escaping
309 kes Fix migration code to get correct Volume name with multiple volumes
310 by skipping |. Fixes bug #936.
311 kes Implement patch supplied by Landon to fix bug #944 where using
312 TLS with bconsole uses 99+% of the CPU.
313 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
315 kes Move patches into patches directory.
317 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
320 ebl Using 'm' in bconsole will show messages like before,
321 and not memory usage.
322 kes Fix bug #935, and probably also bug #903 where files were not
323 restored. MediaId was not properly set in JobMedia record after
326 kes Suppress chown and chmod error messages if the FD is not running
329 kes Apply Martin Simmons' patch that should turn off the new API usage
330 when batch insert is turned off allowing building on older
332 kes Add ./configure search in qwt-qt4 for qwt package
334 kes Bacula is now free of 3rd party GPL copyrighted code!
336 kes Add guid_to_name.c/h which replace idcache.
337 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
339 ebl Detect if new PosgreSQL batch insert API is present.
340 kes Correct incorrect mempool call causing Director crash. Occurs on
341 systems without va_copy().
342 sb Update spec files for 2.2.1 release
344 kes Fix memory pool call in ua_output.c. bug #934.
345 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
346 Add test program to fnmatch.c
348 kes Integrate patch to README.vc8 from
349 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
350 edit it to get it into Unix patch format.
351 kes Implement mkpath.c to replace old FSF makepath.c
353 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
355 Release Version 2.2.1
357 kes Update POTFILES.in
358 kes Cleanup a few underquoted AC_DEFUNs in configure
359 kes Apply patch from Martin Simmons that adds a test for va_copy to
362 kes Fix bug #921 by increasing the number of tries to create a new volume
364 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
365 can be called multiple times. Implement a version for machines
366 without va_copy() that gets a big buffer.
368 kes Integrate more portable zone offset code into bsmtp.c
369 Submitted by Attila Fülöp.
371 kes Fix bad SD->FD return status reported by
372 (James Harper) <james.harper@bendigoit.com.au>
373 ebl Fix a bug in read_close_session which return random status
374 thanks to James Harper
376 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
377 and directory names during restore of single file/directories.
378 kes Add sanity checks to .sql command when string is empty. Hopefully
379 that will resolve Dirks Director crash.
381 kes Apply patch submitted by Martin Simmons that corrects a seg fault
382 in the bsmtp chat subroutine when debug is >= 10.
384 kes Fix Director crash when running bat SQL queries.
385 kes Add David's notes on Item 8: Copy pools.
387 kes Rework projects file to be current and ready for a vote.
388 kes Enhance lex scanner error message.
390 kes Tweak LICENSE file to mention BSD code.
391 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
392 if specified on the ./configure.
393 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
394 This class is intended to allow us to open a second bsock to the
395 Director while in the restore subdialog.
397 kes Fix configure to create bat Makefile before creating dependencies.
398 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
399 kes Add a tooltip to the tray monitor.
400 dvl Set the Director's PID file before dropping privs. This fixes
403 kes Update AUTHORs file
404 kes Increase the default max concurrent jobs to 20 in FD and SD to
405 correspond with the default .conf files.
406 kes Rewrite the Win32 service routines. This eliminates the 3 copies
407 some different, of the same file created by RN when porting the
409 kes Rearrange some of the Win32 directories and the placement of the files
411 kes Set DEVELOPER flag in version.h
413 ========================================================================
414 Release Version 2.2.0
416 kes Apply a second doc patch from Marc.
417 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
418 improves the tips section that discusses how to setup multiple
421 kes Update bat README file.
422 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
423 corrects a typo in the Recycle status check in db_find_next_volume().
424 This will probably fix a number of annoying problems with multiple
426 kes Modify most of dird/msgchan.c to use bsock class calls rather than
427 bnet calls -- no functionality change.
429 kes Modify the Verify output to specify if files are missing on
430 the Volume(s) or disk. Fixes confusion in bug #916.
431 kes When more than one Volume is read in a migration job, the last
432 Volume bytes reported are from the last read volume rather than
433 the last written volume. Fixed. This fixes bug #910.
434 kes Fix display of Recycle flag after update volume=foo recycle=yes.
435 It previously printed New Recyle flag is: no. This fixes bug
438 kes Correct seg fault when switching tape drives during restore.
439 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
440 be used until after 2.2.0 release.
442 kes Remove fnmatch() in SD that permitted wild card specifications.
445 kes Fix %g in filename returned by SQL for browse tree reported by
447 kes Fix configure so that it puts config.out in the cwd rather than
449 kes Attempt to fix the locking problem reported by Eric in bug #906.
450 kes Make berrno class to leave errno unchanged after constructor call.
451 kes Make bnet_server use the heap rather than the stack to allocate
452 its socket fd pointers to avoid a crash at termination. Problem
453 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
455 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
456 and putting it in depkgs-qt along with Qt4.3.
458 kes Rework code in acquire.c that switches drives for reading when
459 the Media Type does not match. This should fix bug #906
461 ebl Fix a director segfault during job setup #907
462 kes Correct seg fault in postgresql when first operation returns no
463 rows. Fixes Dirks File browser problem seg fault with bat.
465 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
466 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
469 kes Implement PopUp YES/NO dialog for bat.
471 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
473 kes Correct RunScript to terminate job in FD on failure.
474 kes Change abort_on_error and AbortJobOnError to fail_on_error
475 and FailJobOnError in RunScripts.
476 kes Minor tweaks of code formating in RunScripts, principally to
477 avoid depassing 80 columns.
479 kes Eliminate one #ifdef Win32 in bsmtp
480 kes Implement grow tool to grow a file for testing very large databases.
481 kes Add big-vol-test to test Bacula seeking with > 5GB.
484 kes Modify find_next_volume() to return all values in Media record.
485 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
489 kes Update Release notes
491 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
492 Warning, in previous beta version, all media get from scratch keep their
495 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
496 This should fix bug #842. Made a note to look at removing the temp
497 files at the end of the install.
498 kes Add ability to mount and unmount a file device providing it is
499 marked as being removable and has the appropriate mount and unmount
500 commands defined in the Device resource. This fixes bug #830.
501 kes When applying a storage override, release all previous storage
502 definitions rather than just prepending the new storage.
503 This should prevent a good deal of confusion.
505 kes Implement ./configure search for qwt libraries.
507 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
508 Win32 FD. This should fix bug #893.
509 kes Remove an unnecessary beep in Win32 init code.
510 kes Update copyright dates in Win32 executable about boxes.
511 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
512 code with a BSD getopt.c and getopt.h.
513 kes Remove sched.h from the Win32 compat directory -- not used.
514 kes Remove the Exit menu item from the Win32 tray monitor. If you really
515 need to shut it down, do it through the services panel or the command
517 kes Remove some inappropriate Bacula FSFE copyrights.
518 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
519 kes Fix regress config non-portable test as pointed out by
520 Florian Heigl <florian.heigl@gmail.com>
521 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
522 as pointed out by Florian Heigl <florian.heigl@gmail.com>
524 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
525 Reported by Frank Sweetser.
529 kes Fix client-only build.
530 kes Integrate client-only fixes for bsys (initgroups) and conio from
531 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
532 kes Make arguments to get_scratch_volume() in same order as other
534 kes Rework the prune_volumes() subroutine so that after purging and
535 no volume found in desired pool, it will check for a scratch
536 volume. This prevents recycling the whole scratch pool.
537 kes Add code to status storage to print boffset_t (largefile support).
539 kes Move qwt (Graphics libarary for Qt4) to depkgs.
540 kes You now need a --with-qwt=<dir> to be able to build bat.
541 kes Update src/win32/cats/bacula_cats.def to include the new
542 db_get_query_dbids() call on Win32.
544 kes Correct a problem when selecting a scratch volume and moving
545 it to another pool that lost some columns.
546 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
547 kes Enhance Autochanger error messages to include Volume and device name.
548 kes Rework prune_volumes() code to take account of InChanger flag,
549 and to handle recycling volumes going to the Scratch pool and
550 current pool because the RecyclePool directive.
551 kes Implement a better and more efficient db_get_query_dbids() to
552 handle creating and passing back a list of DBIds.
556 kes Start work on new more efficient DBId subroutine. First use
557 will be for recycling volume to Scratch inchanger.
558 kes Increase number of JobIds in pruning from 1000 to 10000.
559 This to be replaced by above routine.
560 kes Begin implementation of building Qt4 on Win32.
561 kes Correct typo in fix I added for bad TLS shutdown.
562 kes Pull 2.0.3 patches into patches directory.
563 kes Update Release notes. Include qt-console in line count.
564 kes Update Projects file.
566 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
567 bug in migration code where a job that spanned two volumes
570 kes Implement new BST_DESPOOLING blocked state. Change from locking
571 during despooling in SD to blocking. This means that other threads
572 can work with the device structure, in particular the reservations
573 system while despooling.
575 kes Fix return in reservation message queue that missed clearing
576 the jcr lock (implemented 26Jun07 below).
577 kes Rename a number of dev methods to make locking function names
579 kes Document locking in lock.c. Move lock structures to new file
582 kes Move reservations message lock to lock jcr only this
584 kes Move main SD locking code into lock.c (new file).
585 kes Update Win32 build to include lock.c
589 kes Dirk committed the qwt library code for drawing graphs in bat.
590 kes Tweak install of qwt so that it is integrated with ./configure.
592 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
593 out by Eric (my typo).
594 ebl Fix configure.in to get batch mode enable
595 kes Return correct string from authenticate.cpp in bat when connecting
597 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
598 spurious line drops when using TLS.
599 kes Do not file reparse points when restoring a file that already
602 kes Implement Windows reparse points -- similar to directories, but
603 we do not descend into it. This is a first cut. They seem to
604 be backed up, but restore is not yet tested.
605 kes Remove restore_blocking in tls code when shutting a socket to leave
606 it in blocking mode. Hopefully this will fix the encryption bug
607 reported by Frank Sweetser.
608 kes When opening a file for backup, tell the OS that we are going to
609 read it sequentially -- optimization.
610 kes Change variable names in authenticate_director() to not conflict
611 with member names in bat. Caused great confusion with compiler,
614 kes Queue openssl error messages in case of comm problem.
615 kes Do shutdown() call if socket terminated.
616 kes Remove some duplicated code in tls.c
617 kes Move more of the bsock member variables into private and access
619 kes Add Frank Sweetser's tls-test to the regression suite.
621 kes Add Swedish sv.po file
623 kes Don't print clock skew message in FD if less than 3 seconds diff.
624 kes Add a bit of VSS info to status client.
625 kes Implement a first cut of Vista VSS, using Win2003 code.
629 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
630 loaded tape but uses first drive).
631 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
632 This was indeed a Win32 issue.
634 kes Simplify search of autochanger for in-use Volume.
635 kes Fix exit condition of check for in-use volume. kes Remove
636 inappropriate my_postgresql_free_result() in db_close()
638 kes Fix bad return in FD when encryption signature not found.
639 Probably caused a crash.
640 kes Inhibit missing encryption signature error messages for
641 file types where no signature computed.
642 kes Correct inverted check on autochanger in reservation system.
643 kes Tweak debug code in autochanger reservation.
645 kes Add some additional locking in the cats directory in subroutines
646 that modify packet variables called from batch insert.
647 kes Rework how dcrs are allocated. new_dcr() can now be called
648 with an existing pointer, and it will simply clean it up.
649 This allows the reservation system to test various different
650 devices, and will permit easy device changes.
651 kes A bunch of changes all over to handle new new_dcr() calling
653 kes Work more on the Volume management in the SD. Remember Volumes
654 for tape drives and for autochangers (even virtual disk changers).
655 kes When looking at the Volume list to reserve a drive, handle
656 autochanger names correctly by interating through the changer
657 devices. Also call the Director to see if a Volume is suitable
659 kes Fix some bugs in bscan. Make sure all media records are written.
660 Make sure that valid JobMedia records are written for disk files.
661 Previously they were completely wrong.
662 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
663 that the URLs don't change and so that the developers will all
664 work off the same copy. Rebuild from scrach.
665 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
669 kes Fix seg fault in FD from incorrect digest size.
670 kes Fix argument to non-OpenSSL crypto.c subroutine.
674 kes Remove a few malloc()s from the encryption code.
675 kes Use the class calls to bsock in filed/backup.c and restore.c in
676 place of the old bnet_xxx code.
677 kes Implement code that does an on the fly calculation of the
678 signing digest during restore of encrypted files. It makes
679 a best guess at the algorithm, and if it is not correct, will
680 then revert to the old code which reads the file after it is
682 kes Implement at least one missing crypto stream in stream_to_ascii()
683 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
684 #877 where a reload with bad syntax causes Dir to exit.
686 Cut: 2.1.14 beta (not released)
688 kes Do not free a volume on a tape drive until another volume is
689 mounted and read, or the autochanger unloads the volume.
690 This should help the SD re-use volumes that are already mounted,
691 and should fix bug #886.
692 kes Apply patch from user brettedgar that allows gnome2-console include
693 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
694 kes Apply patch from Lucien Weller that fixes day of week calculation
695 because of DST flag problem. Fixes bug #887.
697 kes Move find_next_appendable_volume() to after acquiring a valid device
698 in reserve.c. This fixes bug #864 -- confirmed by reporter.
700 kes Unable to reproduce bug 872. However added additional testing for
702 kes Bug #874 resolved by documenting SQLite limitations.
703 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
704 kes Bug #881 resolved by removing typo in mtx-changer script.
705 kes Made Frank Sweetser's wiki the official Bacula wiki with his
706 approval. Added a link to the wiki on the web page, and implemented
707 a backup from http://paramount.ind.wpi.edu
709 kes Fix update allfrompool to pass pool name.
711 kes Convert to pure GPL v2 license.
712 kes Fix sscanf problems reported by Peter Buschman that caused
713 a bus error on Solaris.
714 kes Rework (simplify) the select prompt in bat.
715 kes Move get_jobid_from_tid() into lib and create a
717 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
718 should definitely fix the problem of lost error messages in the
720 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
721 kes Eliminate tcpd.h from the project. Enclose the #include from the
722 library with extern C ...
723 kes Add print of signal name when a signal is trapped.
727 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
729 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
730 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
731 makes SQLit3 run 30 times faster, though a bit less safe.
732 kes Implement --with-batch-insert in configure and detection of thread
733 safe libraries. It is on by default, but turned off if no thread
734 safe library (e.g. SQLite 2) is available.
736 kes Fix Bacula PostgreSQL buffer overruns.
737 kes Do better checking for NULL results returned from PostgreSQL;
738 implement retry for failed queries; clear results buffer after
739 failed query. Hopefully this will correct the PostgreSQL failures.
741 kes Implement algorithm to handle only one appendable volume with
742 Prefer Mounted Volumes = no.
743 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
744 returned from a query.
745 kes Make volume lock recursive.
746 kes Implement an additional volume reservation algorithm that
747 starts by considering all reserved volumes then uses the
748 old brute force algorithm of searching the resources to
749 find a suitable device.
750 kes Add new reservations debug code and refine the old code.
751 kes Update the win32/dll/bacula.defs file.
753 kes Tweak reservations algorithm to permit a few more cases, i.e.
754 volume reserved, but on different drive, ...
755 kes Enhance SD status to include Pool and Media Type for drive in a
756 more readable format (a bit longer).
757 kes Fix PostgreSQL double free.
759 kes Minor refactoring of restore decryption code.
760 kes Add code to smartall.c to detect double free of a buffer.
762 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
763 so that bsmtp will create a correct email address (mailbox only).
764 kes Modify 'memory' command so that the buffers are listed as 'In use'
765 to avoid confusion with Orphaned buffers.
766 kes I reworked the OpenSSL include/lib flags to be handled in
767 the standard Bacula way, which should fix bug #863 concerning
768 non-standard OpenSSL libraries.
770 kes Implement Help Browser window for bat.
771 kes Fix reload bug that reset StorageId to zero.
773 kes Fix TLS #ifdefing when TLS turned off.
774 kes Ensure that when labelling a tape with Slot=0 that InChanger
776 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
778 kes Add StartTime to final uar_sel_jobid_temp query so that we can
779 add DISTINCT (required by PostgreSQL).
780 kes Implement BSOCK authenticate_director() method. Eventually will
781 authenicate all daemons.
782 kes Move several more functions into the BSOCK class.
784 kes Add code to tell the OS that we no longer need a cached
785 file that we were reading. In findlib/bfile.c. Also,
786 only cache files that we are reading. Thanks to
787 Tobias Oetiker <tobi@oetiker.ch> for the idea.
788 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
789 kes Implement script to automatically generate cats and dll .def
791 kes Update README.mingw32 to include new .def file generation.
792 kes Correct typo in UTF-8 error message as reported by:
793 jhernandez <julianhernandez@gmail.com>
794 kes Add additional sm_check() code on debug level 1.
795 kes Set default debug level to 1.
796 kes Trap SIGABRT in attempt to get traceback.
798 kes Reduce bat connect timeout from 30 to 15 seconds.
799 kes More restructuring and implementing BSOCK class in place of
801 kes Remove a few unnecessary malloc() tests in crypto code.
802 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
803 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
804 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
806 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
808 kes Fix Verify InitCatalog. The attributes were not pointing to the
809 correct saved location.
810 kes Implement message callback so that GUI is sure to get all
811 daemon messages. Currently displayed in a dialog in bat.
812 kes Ignore SIGUSR2 (Bacula timer) in bat.
813 kes Apply regress patch from bug #859 to allow regress to work
814 with Solaris compiler.
816 kes Begin adding TLS support to bat.
817 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
818 clean up lex.c and make it more readable.
820 kes Move more bnet functions into the BSOCK class.
821 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
822 kes Complete change of berrno strerror() method to bstrerror()
826 kes Cleanup incorrect email addresses in bsmtp.
827 kes Make bat display initial messages rather than discard them.
829 kes First cut of adding .mod to the run command.
830 kes Implement auto display of messages in bat.
831 kes Enhanced preferences to allow all Bacula output to be
834 kes Try to make bsmtp date routines more generic.
835 kes Fixed bug #856 autochanger documentation.
836 kes Rework bsmtp date editing for Win32. This fixes bug #854.
837 kes Add new cats entry point so Win32 builds.
839 kes Attempt to fix bsmtp date editing on OSes without %z editing.
841 kes Do better checking for the MySQL 64 bit libraries looking for both
842 .a and .so libraries.
843 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
844 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
845 kes Require the thread safe version of MySQL during configure. Thanks
846 to Andre Noll for pointing this out.
847 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
848 continuing in migration code.
849 kes Apply implementation of tray-monitor font derived from gnome-console
850 submitted by Andreas Piesk <a.piesk@gmx.net>
852 kes Eliminate important memory loss in SQLite
853 kes Fixed the batch insert MySQL thread specific data that was not
854 being freed. See cats/mysql.c:db_thread_cleanup().
855 kes Fix restore before command.
856 kes Convert old hdr.name to name() in a few places.
857 kes Implement update jobid command.
858 kes Return all time_t dates in db_get_job_record()
859 kes Stop watchdog in SD earlier.
860 kes Put Pool just after Storage in please mount message.
861 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
864 kes Update the po files.
865 kes Fix Verify InitCatalog by making it cache attributes.
867 kes Change name bacula-bat to bat for man 1 page to correspond to
869 kes Check for client and store NULL pointers in status command. This
871 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
872 kes Fix sign extended editing of %p.
873 kes Clean out a little old #ifdefing in cats/mysql.c
875 kes If time diff between DIR and FD is more than 600 seconds convert
876 INFO message to WARNING.
877 kes Implement heap size display in status for all daemons.
878 kes Attempt to fix MySQL db open memory loss (not successfull).
879 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
880 kes Eliminate memory loss in MySQL (possibly other SQLs) during
881 Query. This looks like a MySQL but but by doing extra releases,
882 the memory goes away. This should fix bug #847.
884 kes When backup fails, cancel SD before waiting for sd termination.
885 kes If SD is waiting for FD to connect during cancel, wake up the
887 kes Fix fsf code so that errno is correctly reported.
888 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
890 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
891 so that Bacula doesn't later stumble into a seg fault.
892 kes Use the term Restore Client in the restore Job report.
893 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
894 the original job's FileSetId.
895 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
896 spooling in migration jobs. Not yet tested.
897 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
898 reading conf file from a pipe. However, do it with open_bpipe()
899 rather than popen. Not yet tested.
901 kes Fix an ugly bug where the VolCatBytes were getting updated
903 kes Implement bconsole memory command that prints current memory
904 usage, plus smartalloc dump.
905 kes Clarify some error messages in backup, admin, and migrate.
906 kes Shrink label dialog to smaller size.
907 kes Invert Cancel OK buttons on restore to be OK Cancel.
908 kes More strerror() to bstrerror() conversions.
910 kes Start implementing bstrerror() in place of strerror().
911 kes Stripping path -- seems to work.
913 kes Prevent door and port files from being restored (mostly
915 kes Free an unreleased buffer in compat code.
916 kes Change console Job name from *Console* to -Console- to eliminate
917 Win32 filename problems. Put Win32 path separator when creating
918 Console file. This fixes bug #846.
919 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
921 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
923 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
924 to force Win32 error message.
926 kes First cut strip path. The data should be passed to the FD,
927 but nothing is done with it yet.
928 kes Enhance the digest and signature routines in the crypto
929 library to accept a JCR and to use it to print error messages
930 so that they will go in the Job report rather than the daemon's
932 kes Simplify some of the verify signature code.
933 kes Simplify a few of the alternative returns in the signature
936 ebl Use only POSIX regex instead of GNU regex in breg.c for
937 File relocation. It fix broken freebsd compilation.
938 kes Convert all other Dir files to use new ua class message
940 kes Tentative fix for missing digest signature in bug 807.
941 kes Correct handle problem in new win32_ftruncate routine.
942 kes Convert ua_purge.c and ua_update.c to use new ua class
943 message routines for bat.
945 kes Correct incorrect installation of LICENSE in Win32 installer.
946 kes Display LICENSE at the beginning of the Win32 install.
947 kes Attempt to correct the need for the png files to be installed
949 kes Reapply my bat.conf install script in qt-console. I think I
950 editted bat.pro instead of bat.pro.in and it was lost.
951 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
952 the /var/lock/subsys for subsysdir. Also corrects typos in the
955 kes First cut update job.
956 kes Correct configure to include qmake of src/qt-console directory.
958 kes Make restore job yes/mod/no print in one command so GUI works.
959 kes First cut implementing backup and restore client.
960 kes Correct editing in Verify output that caused a seg fault.
962 kes Insure that bat.conf is not overwritten during installation.
963 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
964 while I was implementing migration in March 2006 !
966 ebl Cleanup file relocation, using char *RegexWhere instead of
967 char *where + bool where_use_regexp
968 kes Update some manpages and add bat manpage.
969 kes Make a first cut at converting bacula.spec.in for bwx-console
971 kes Apply patch from John Goerzen to add hostname as fourth argument
972 to make_catalog_backup script.
973 kes Fix typos I introduced into bsmtp.c
974 kes Make pm_strxxx() routines handle input of NULL pointer. This
975 is to protect from NULL pointers returned from SQL databases.
976 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
977 kes Add more debug to FIFO code -- fix fifo regression test.
979 kes Implement posix_fadvise in FD, and for reading spool files in SD.
980 kes Add thread timer to bnet_connect() to break from OS if wait time
983 kes Update Win32 build to include new files, new symbols, and
985 kes Implement socket level heartbeat (tcp_keepidle)
986 ebl Commit File relocation patch
987 kes Make bat have 'make install' target.
988 kes Warn during install if old gnome-console binary found.
989 kes Warn during install if old wx-console binary found.
990 kes Add -8 option to bsmtp command line to add content type utf-8.
991 Fixes bug #809. (Character coding problem in bsmtp).
992 kes If < is found in target (from, to, cc) then do not enclose the
993 target in < > in bsmtp. Fixes bug #772 (malformed address).
994 kes When printing certain items in dbcheck, stop after 300000.
995 Fixes bug #822. (dbcheck loops).
996 kes Incorrect status in Dir after waiting for mount with poll set.
999 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1001 kes Print waiting to reserve a device every 5 mins.
1003 kes Don't call close_part in label.c if tape and relabel.
1004 kes Don't free volume if busy in close() -- should help with
1006 ebl Fix #824 RunScript bug (After script could be execute twice)
1007 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1008 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1009 Add a regression script to test RunScript
1011 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1014 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1015 deprecated. No additional bugs will be fixed, and they will be dropped
1016 in a future release (probably 2.4.0).
1017 kes Change name of wx-console to bwx-console to make it more Bacula
1019 kes Change the name of gnome-console to bgnome-console to make it
1022 kes Some time in March, a Feature Request with patch from Jorj Bauer
1023 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1025 The ability for the director to validate a Client (FD) CN against
1026 an arbitrary set of patterns rather than the hostname, with
1027 A new 'TLS Allowed CN' set of directives which are implemented
1028 in the Client resource. Then pattern matching is used in place
1029 of hostname matching against the Certificate's CN. As an example, we
1030 have certificates which (a) use a local CA, and (b) have a CN of the
1032 kes Add new/changed entry points to Win32 build
1033 kes Create unaccepted-projects for projects that are not accepted.
1034 kes Simplify locking in the reservations system.
1035 kes Add more debug code in reservations.
1036 kes Make sure error condition on reserving a volume is handled correctly.
1037 kes Correct handling of volume_in_use.
1038 kes Correct handling of initializing a device.
1039 kes Move handling of broadcasting releasing a device into release_device().
1040 kes Correct attaching dcr to dev so that it is only done if device
1041 is properly initiated.
1043 kes Locking debug level tweaks in SD.
1044 kes Tweak new Volume code.
1046 kes Add exec external-command [wait-seconds] to bconsole. This
1047 executes the external-command. Note! normally external-command
1048 should be enclosed in double quotes.
1049 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1050 it should normally be off in a production system.
1052 kes Implement die command for SD so that we can force it to dump.
1053 kes Implement SD lock debug code.
1054 kes Implement new algorithm for keeping Volume list in SD. It
1055 is now owned by the device.
1057 kes Implement new code for freeing in use volumes that should
1058 resolve if not all, some of the problems of multiple drive
1059 tape conflicts described in bug 801.
1061 kes Fix gui/bacula-web/images files in svn.
1062 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1064 ebl Fix a bug in batch mode (in string escape)
1065 kes Correct migration prune SQL typo that crept in in a
1066 recent 2.1.x change.
1068 kes Move bnet_despool() into class in bsock.c
1069 kes Modify job report to include director name and Build OS.
1070 kes Move drop root privilege and check_catalog() before fork.
1071 kes Add update database scripts (version 9 to 10) to updatedb directory.
1073 ebl Check size and age of each file after its backup to see if
1074 it has changed during backup, if 'checkfilechanges' is set.
1075 The FD will do an extra check (stat(2)) after
1076 each file backup. mtime, ctime and size are compared with
1077 'before backup' information. If time or size mismatch, an
1078 error message will be generated. You must upgrade FD to use it.
1080 kes Make database name and user configurable
1081 --with-db-name=xxx --with-db-user=xxx
1082 kes Add back database type to message.c for debugging.
1084 kes Implement dir_sql() which issues an SQL query.
1085 kes Modify bat medialist to use dir_sql() and do some minor C++
1086 formatting as well as eliminating a number of pointers, simplifing
1089 kes Fix some of the mtx-changer grep commands for tape label readers.
1090 kes Convert a number of bsendmsg into the appropriate send/warning/error
1091 message class calls.
1092 kes Suppress the using database message in the .sql command.
1093 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1095 kes Add context menu for floating a window.
1096 kes Some minor cleanup and name changes in qt-console
1097 kes Add doing mt setblk 0 in Win32 mtx-changer.
1098 kes Apply Martin's bug fix to move definition of ENODATA for
1100 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1101 sqlite2 and sqlite3.
1103 kes More pruning cleanup.
1104 kes Turn on wait_for_drive by default in mtx-changer.
1105 kes Turn on Batch insert code by default as it now passes regression.
1106 kes Add ./configure --enable-bat to enable building of Bat.
1107 No install yet though.
1109 kes Implement a new .sql command for bat.
1110 kes Implement code to turn off pruning in obtaining the next volume.
1111 Pruning is turned off for the status dir command, but turned on
1112 for SD requests and for the list nextvolume command.
1114 kes Correct Qmsg() that was not updated correctly when committing a
1115 previous change (probably the recent TLS patch).
1117 kes Write new subroutine is_volume_purged() that explicitly checks
1118 if the Volume is purged, and if so marks it as such. This should
1119 resolve problems reported about needing to mount twice to recycle
1121 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1122 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1123 amount of duplicated code.
1124 kes Do volume pruning only for the Media Type desired (reduces pruning time
1125 if multiple Media Types are in the same pool).
1126 kes Implement more detailed info in the Job report for the Bacula version
1128 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1130 ebl Add bbatch tool to bench database and insert mode.
1131 Fix sql quote stuff in batch mode
1132 Fix sql stuff for mysql
1134 kes Correct problems with am/pm scheduling. Fixes bug #808.
1135 kes Implement new prunning code that prunes up to 1000 jobs at
1136 the same time. The same technique can be applied to a number
1137 of other prune/purge subroutines.
1138 kes Add an insanity check when starting a new tape job to ensure
1139 that the tape position has not been changed. If so fail the
1141 kes Fix Win32 build for dlls to add the folllowing:
1142 src/lib/bsock.c -- new file with new entry points
1143 src/lib/dlist.c -- new entry points
1144 src/cats/sql_create.c -- new entry point
1145 src/cats/sql_cmds.c -- new DATA item exported
1147 ebl batch mode cleanup bscan-test is ok now.
1148 kes Implement SD code to check length of disk volume before appending.
1150 kes Correct return status on db_batch... routines.
1151 kes Add call to db_write_batch_file_records() to migration code.
1152 ebl Fix AfterJob timing
1153 kes Move the checking of the database in initializion of the Director
1154 to after we drop privileges. This avoids the need for both root
1155 and bacula access to the DB.
1156 kes Correct a misplaced variable definition in src/filed/backup.c
1157 kes Correct how the new batch insert db_create_attributes_record()
1158 uses the arguments. Caused a seg fault in bscan.
1159 kes Implement lock() and unlock() methods in DEVICE class.
1160 Implement block() and set_block(xx) methods in DEVICE class.
1161 kes Modify bnet_connect() so that it uses time() to check for the
1162 wait time expiring (on some OSes, some system calls may not
1163 return immediately).
1164 kes Modify Verify to obtain the previous JobId when it is actually
1165 running rather than at schedule time (as it was in 1.38.x).
1166 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1168 kes When checking pid in pid file, continue running if the pid is
1169 the same as ours. This occurs on IRIX after a system crash.
1172 kes Extend new GUI API.
1173 kes Make the ua structure a class, and implement send_msg(),
1174 error_msg(), warning_msg(), and info_msg().
1176 kes Apply fix from for building wx-console on the Mac from
1178 kes Implement new select mechanism for GUI programs.
1179 kes Reorganize initialization of stackedWidgets in bat.
1181 kes Add updated nagios plugin supplied by Christian Masopust.
1183 kes More bat implementation.
1184 kes File migrate bug with Pool Occupancy using mediaid instead
1185 of jobids. Fixes bug #795.
1186 kes Fix orphaned buffers in filed backup and verify due to
1187 crypto buffers not freed during errors. Fixes bug #789.
1188 kes Extend new GUI api code to tree commands.
1189 kes Ensure that tree and dot commands check console ACLs.
1190 kes Permit marking directory with trailing slash.
1191 kes Allow 20 console connections (instead of only 10).
1193 kes Add smartctl call to bacula-sd.conf as an example of getting
1196 kes Modify jobq.c to let simultaneous restore jobs run. This may
1197 cause them to fail if they cannot get a drive.
1198 kes Add Client Connect Wait to Storage daemon to permit users to
1199 modify the time the SD waits for a FD connection.
1201 kes Correct virtual changer check which was backwards. This caused
1202 volumes to be unloaded into slots already occupied.
1204 kes Apply Command ACL filter to JobId list in restore command.
1205 kes Correct typeo in var.c patch.
1207 kes Don't let Bacula prune File or Job records for the current Job.
1208 kes Fix variable substitution pad + inc bug reported (with patch)
1211 kes Correct SQLite log table index as reported by Luca Berra.
1213 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1215 kes Begin implementing new comm signals for API.
1216 kes Fix a few places in lib/message.c where the open fd may
1218 kes Continue implementing lib/bsock.c (real class). Make jcr,
1219 who, host, and port private. There are new methods to access
1220 them for non-class use. This required touching a number of files.
1222 kes Add LANG=C to autoconf/randpass so it works with languages other
1223 than English. Fixes bug #788.
1225 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1227 You will not be able to generate Include/Exclude list any more.
1228 It will be fixed soon.
1229 If you want to use this, you can apply
1230 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1232 kes Restore of sockets created false error messages because Bacula
1233 no longer restores sockets, but the code was still trying to
1234 set the attributes on a non-existent file. Reported by a user.
1235 ebl finish RecyclePool feature
1236 Media will takes Pool.RecyclePool
1237 when moving from Scratch to a Pool or when user will do
1238 update volume=xxx frompool
1239 To use it, add RecyclePool = aPool to your Pool resource
1242 RecyclePool = Scratch
1246 kes Expand new BSOCK class adding signal() and new BNET signals.
1247 kes Begin enhancing the dot commands adding a new API function
1248 that returns more information and will make it easier
1249 to interface to the Director from a program.
1251 kes Make DEVICE fd private. Its new name is m_fd, and can be
1252 obtained with dev->fd() outside the class. This is the
1253 first of many DEVICE members to be made private.
1254 kes Implement Michael Renner's idea on having a virtual disk
1255 changer. I made some minor modifications (e.g. I did not
1256 implement the Virtual Changer directive, but simply set
1257 the Changer Command to an empty string.
1259 kes Implement a BSOCK send() method that writes the whole record
1260 in a single write() request rather than in two.
1261 ebl add update volume=xxx recyclepool=yyyy
1262 volume takes recyclepool from pool when using update volume=xxx from pool
1264 kes Fix encryption deblocking bug, which caused some restored files
1265 to be truncated. This fixes bug #763.
1266 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1267 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1269 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1270 ebl Use btime_t instead of uint64_t in media patch.
1272 kes Optimize the use of the database a bit in the Status dir command.
1273 Only open it when needed, ensure that if any previous database
1274 was opened, it is closed.
1276 kes Correct VolCatBytes bug from media patch.
1277 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1278 in the case of orphaned records.
1279 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1280 and File records in 300K chunks to be more efficient. This
1281 idea came from Juan Luis Frances (if I remember right).
1282 kes Apply Eric's scratch patch that moves a purged Volume to
1283 the RecyclePool. Question: how is RecyclePool set? what
1284 happens to the ScratchPool?
1285 kes Apply Eric's media patch that collects read/write media
1286 times as well as byte counts. This patch requires a
1287 simultaneous upgrade of the DIR and SD. Note, there
1288 should be some way to turn off timing. I'm not sure
1289 times are in Bacula units.
1290 kes Apply Eric's batch-insert patch.
1292 kes Update projects list.
1294 kes Implement Include/Exclude file lists in FD as dlists using
1295 the new dlistString class. This permits efficiently having
1296 large include/exclude lists and completes project Item 25.
1297 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1298 console is authorized to cancel the job. This fixes bug
1300 kes Modify SD so that the VolCatJobs medium record is updated
1301 at the beginning of a Job rather than the end. This
1302 fixes bug #775 where exceeding MaxVolJobs caused jobs
1304 kes Added a mutex around getting and setting Volume information
1305 so that multiple simultaneous jobs will single thread.
1307 Switch to using Subversion
1308 kes Remove src/pygtk-console/ from configure
1310 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1311 plus the entrypoints.
1312 kes Apply patch supplied that corrects debug print
1313 in canceling jobs for max run time. Supplied as
1314 part of bug #621, which was previously fixed.
1316 kes Test on job_canceled() and sd_msg_thread_done inside
1317 loop starting the message thread to avoid a race condition.
1319 kes Remove rl_catch_signal from console.c as it conflicted
1320 with the header definition. Fixes bug #765.
1321 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1323 kes Clarify some stored/acquire messages to indicate if the
1324 problem is with read or append.
1326 kes Fix memory leak with storage ids in cats/sql_get.c
1327 kes Terminate watchdog earlier to avoid reference to released
1328 memory -- reported by Jason Austin.
1329 kes Move closing the database from jobq.c to the director daemon
1330 termination routine. This fixes memory leaks for shadow jobs
1331 (i.e. migration jobs).
1332 kes Free up the unique jobid chain items in migrate.c. This fixes
1333 a memory leak problem.
1334 kes Convert some ugly looking for statements to use foreach_alist
1335 in findlib/find.c. This will facilitate converting the structures
1336 to use dlist (for large include/exclude lists).
1337 kes Fix a bug in the btree.c and btree.h routines, then rename them
1338 rblist and add them to be built in src/lib. Include some new
1339 methods written by Rudolf Cejka that make the code more readable
1340 (hides some of the ugly casting).
1341 kes Add set_next() and set_prev() methods which make the code much more
1342 readable. Also add a new dlistString class that facilitates storing
1343 strings in dlists. To be used in the large include/exclude lists.
1344 kes Make some trivial modifications to lib/tree.h that use rblist
1345 rather than dlist for storing the tree links. This was suggested
1346 by Rudolf Cejka. The result of this is that the restore tree now
1347 uses red-black binary trees rather than simple linked lists. This
1348 should give rather dramatic speed improvements for directories
1349 contining large numbers of directories/files (more than 10000).
1351 kes Fix maxruntime bug #621.
1353 ebl Implement the include JobID in spool file name project.
1354 kes Reorder projects file in order determined by Jan 2007 vote.
1355 kes Implement item #12 on project list -- quick release of FD by
1357 kes Fix open of SQLite3 db where user does not have write permission
1358 so that DIR does not crash. Fixes bug #761.
1360 kes Add back missing @ in Win32 Makefile.
1361 kes Change 'Device not configured to autolabel' from INFO
1363 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1364 which should restart an indefinite # of times.
1365 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1366 other DIR specifications.
1368 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1369 Fix path quoting in SQLite scripts.
1370 Fix problems with SHGetFolderPath.
1372 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1374 kes Fix Job restart on error bug that promotes an Inc to a Full
1375 backup. This should fix bug #755.
1376 kes Add qt-console and first cut of code.
1380 kes Fix Bacula->Documentation link on Win32 to point to index.html
1381 instead of bacula.html. Fixed bug #750.
1382 kes Return JobId in db_get_job_record() when JobId==0. This should
1384 kes Do not release source pointers when restarting a failed job.
1386 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1387 This *should* fix bug #747.
1388 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1391 kes Modify USTORE constructor to set an empty store_source string,
1392 and don't copy the store_source string in a cancel. Hopefully
1393 this will fix Arno's seg fault, bug #744.
1394 kes Add back code to disable conio in configure. Fixes bug #743.
1395 kes Correct the Options scanner in the FD to correctly handle
1396 SHA1 option, which was eating the next option. Reported by
1398 kes Add code to indicate when the SD is spooling, spool wait, and
1399 despooling as requested by Alan Brown.
1401 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob