1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Modify autochanger locking to attempt to avoid race
30 kes Make sure device not busy before doing label command.
31 kes Display open() errors except when polling. Previously too
32 many were suppressed. This should fix bug #1070.
33 kes Fix Win32 reparse points. Bacula will not recurse into any
34 reparse point directory, including mount points, unless the
35 directory is explicitly mentioned at the top level (same as
36 with Unix). A file that is linked to another file will be
37 backed up -- much as Unix does for hardlinked files.
40 kes Remove double quotes from ChangeLog and ReleaseNotes
41 kes Remove StorageId test when pruning and recycling (Eric's changes).
42 kes Remove old form of locking when getting volumes -- causes deadlock.
43 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
44 the name unique and to eliminate compile time error.
45 kes Add accurate.o to Win32 FD Makefile
47 kes Fix cats dll build on Win32 after db_update_job_end_record
48 calling sequence change.
49 ebl Switch to tokyo dbm instead of htable in accurate code
50 ebl Include tokyo dbm to bacula source tree
52 kes Fix buffer overruns detected by Coverity.
54 kes Tweak joblog display.
56 kes Implement --without-qwt
57 kes Fix layout of restore tree dialog
58 kes Add configure bat QWT libraries, so that bat can be built
59 with or without the QWT libaries.
61 ebl Add dummy tape driver for regression tests.
62 kes Make sure we unload the right slot when swapping.
64 kes Add debug times, reduce size of two-pool-changer test
66 ebl Tweak autoconf scripts for faketape
68 kes Improve SD reserve debug code.
69 kes Testing an improvement to free up volumes no longer in use.
71 kes Rework SD acquire for read to handle autochanger Volume
73 kes Implement regression that explicitly tests swapping a Volume
74 from one drive to another.
75 kes Enhance disk-changer to detect most error conditions.
76 kes Fix SD code so that it properly swaps a Volume between drives.
79 kes Apply libdbi patch from Joao Freitas for regress and for
80 Bacula trunk. Regress now works with libdbi. Nice.
81 kes Apply .nobackup patch from bug #1077 submitted by
83 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
84 name into jobs cloned via the run directive.
86 kes Prevent a Volume that is being swapped from being freed from
87 the volume list. This will most likely fix, at least partially,
89 kes Fix strippath so that it does not get a buffer overrun and crash FD.
91 kes Remove 50 millisec wait in SD that broke debugger.
92 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
93 that a job may run, counted from when the job was scheduled.
94 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
95 a job may block waiting for a resource, counted from when the job starts
96 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
97 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
98 that implements multiple commands per line in the console when using
99 readline. Modify the default to use a semicolon as the command separator.
101 ebl Fix SQL query in migration code.
102 ebl Make accurate mode with hash disk pass regression tests
104 ebl Implement first cut of accurate backup with hash disk.
106 kes Force unload of volume when wrong volume mounted in SD.
108 kes Fix bat seg fault at termination.
109 kes Add Bacula generated version to bat about box.
112 kes Experiment with allowing multiple read jobs.
113 kes Move final volume swapping code to DCR method and
114 call it from acquire_for_read().
115 kes When wrong volume is mounted during read, unload_autochanger.
117 kes Integrate the libdbi changes from Joao Henrique Freitas
119 kes Stop searching for Volumes in SD askdir if DIR returns the
120 same volume name twice in a row.
121 kes Close bat console windows first to eliminate error message
124 kes Tweak the swap Volume from one drive to another code so that
125 it now seems to work.
126 kes Resolve several problems with recycling that broke the new
127 code (these problems are in 2.2.9 as well).
128 kes Remove the volume lock when calling the sysop code.
129 kes Don't mark a reserved volume with no writers as unused otherwise
132 kes Rework class structures for VOLRES, DCR, and DEVICE to make
133 the method names a bit more logical, and for more logically
134 handling the responsibilities.
136 kes Remove redundant code in terminating the scheduler that just
137 causes a seg fault in many cases.
138 kes Cleanup releasing a volume and make it a DCR method.
139 kes Improve algorithm for detecting pre-reserved volume and
142 kes Tweak volume swapping code so it works.
143 kes Correct name overloading in mount.c
144 kes Replace released flag in VOLRES with reserved and add access
145 methods for the VOLRES class.
146 kes Prevent volume from being released while being swapped.
147 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
149 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
151 kes Refactor parts of stored/mount.c
153 ebl Add sanity checks for VolWriteTime and VolReadTime
154 ebl Take care of bad clock changes while computing VolWriteTime
155 and VolReadTime. This should fix or limit #1066
156 kes Correct error string numbers in dird/catreq.c
157 kes Restructure reserving, acquiring, and mounting volumes. Calls to
158 autochanger are deferred for mount.c -- simplifes the code.
160 kes Do not prune any running job. It just fails the job.
161 kes Lock the volumes when changing dev->reserved_device and marking
162 the volume unused otherwise the device can get reserved by
163 another job before the volume is released, thus blocking it.
165 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
166 kes Fix bug #1063, reuse of freed ptr in list nextvol.
167 kes Release regex compile buffer in filed/job.c
168 kes Add proper type of const char in sql_create.c
169 kes Turn off debug in daemon termination routines
170 kes Move free_volume_list() before devices are freed in stored.c
171 kes Fix reference to uninitalized stack variables in bregex.c.
172 This should correct bug #1067.
174 kes Fix possible seg fault in SD when freeing a volume entry.
176 kes Implement unload_dev() before swap device.
177 ebl Add statistics prunning with option and menu
178 kes Separate unload_dev() from unload_other_device() in autochanger.c
180 kes Apply patch from bug #1069 that corrects spurious error messages
181 when ACLs enabled on SGI but no ACL exists.
182 ebl Fix small segfault in bacula-sd when debug level is 500
183 kes Modify run_program() and run_program_full_output() to use
184 call by reference for the results string. This corrects a long
185 standing problem where the address of the string may be changed
186 in the subroutine but not in the calling program.
188 kes Re-enable code to remember last volume mounted on a non-tape
190 kes Add patch supplied in bug #1068 that fixes a SD crash when using
191 a Virtual autochanger.
192 kes Generate correct JobMedia records during spooling/despooling when
193 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
194 <tih@hamartun.priv.no> for excellent analysis and testing.
196 kes Tweak hash algorithm for htable using Martin Simmons idea
197 for doing a circular shift.
198 kes Remember what volume is in VTLs (previously turned off for
200 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
201 pointed out some problems in creating JobMedia records during
202 spooling with concurrent jobs. Fix the problem by updating the
203 start file position before despooling and generate a jobmedia
204 record at the end of despooling.
206 kes Fix handling of JobMedia records during spooling and when a
207 Volume is changed without actually writing data to the Volume.
209 kes Rework certain SD locking based on gdb tracebacks of deadlocks
210 sent by Eric. This code now uses only the volume_lock() rather
211 than the reservations lock when at EOM and acquiring a new
213 kes Ensure only one exit point in several subroutines.
215 kes Implement bsock code to permit locking. Use the new code in Verify
216 in the FD to prevent the heartbeat thread from disrupting the Verify
217 data sent to the Dir.
218 kes Modify SD locking to eliminate locking the reservations system from
219 outside the system. Use the volume lock when getting media data
220 and reserving a new volume at end of media.
221 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
222 when SD starts are not locked into place.
224 kes Fix error compiling runscript code on 64 bit machines.
225 kes Tweak Win32 mount point code.
226 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
227 cleared giving bad file estimate).
228 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
231 kes Keep Schedule run lists in order as suggested by
234 kes Implement autostart scripts for Debian.
235 ebl Implement upgrade catalog scripts.
237 ebl Apply jobstat patch for long term statistics. Have to implement
238 purge stats command and upgrade scripts.
239 kes Fix mtx-changer.in for broken Debian mt program.
241 kes Fix large number of JobMedia records reported by Eric Bollengier.
243 kes Apply doc fix from bug #1062.
244 kes Resolve crash and improper restore wx-console Win32 restore
245 GUI. Fixes bug #1065.
246 kes Update Win32 wxWidgets to latest version.
247 kes Attempt to do correct handling of Win32 mount points. Should
249 kes Fix Win32 FD backup/restore memory leak due to improper termination
250 of BackupRead/Write. This fixes bug# 1038.
252 ebl Reduce memory usage for accurate backup, working only with ctime
253 and mtime. (not all Lstat field)
254 About 40MB for my linux system (400.000 files)
256 kes Add dcr->reserved_volume flag that allows us to release a volume
257 even if it is not vol->released. This allows maxvol2 to work when
258 Volumes expire and we are already writing to the device (i.e. a
259 volume is pulled out from under us by another job terminating after
260 we reserve the drive).
262 ebl Permit multiple command/console per runscript definition.
263 RunScript { command = /bin/true ; command = /bin/false ... }
264 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
265 (restart an application) just after the VSS snapshot on windows.
266 kes Don't zap dcr values during release_volume() as they might
267 have the next Volume to be mounted.
268 kes Fix AIX prototype.
270 kes Second cut of drive switching during backup.
273 kes Update Win32 version of wxWidgets to most recent version.
274 kes Tweak Copy job details.
275 kes Rework dir_find_next_appendable_volume to make a bit more effort
276 to find a suitable volume before giving up.
278 kes Make ask_sysop_to_create... to return if waken from wait.
279 This helps get out of blocked conditions.
280 kes Experimental implementation of switch_device in reservations.
281 kes Implement FD version to allow easier protocol changes.
282 kes Add Plugin Options string -- not yet passed to FD.
283 kes Implement PluginOptions ACL.
285 kes Attempt to correct problems with restores with autochangers and
286 use counts going negative
287 kes Rework SD status command and implement API for bat. Implements
288 header, runing waitreservation, devices, volumes, spooling,
289 and terminated status keywords.
290 .status storage=xxx <keyword>
291 kes Clarify TLS error message by adding double quotes around name.
292 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
293 kes Pass jcr to tls routines so debug messages can be handled better.
294 kes Rework jobq resource allocation code, and possibly fix a bug
295 that caused reference counts to get out of sync.
297 kes Rename fd/dir plugin to use Bacula standard underscore.
298 kes Plugin work -- bring dir up to fd level.
299 kes Start implementation of VTL code
300 kes Fix Win32 build after adding new cats subroutine.
302 kes First cut at Duplicate Job implementation.
304 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
305 kes Start PluginOptions string, and refactor a bit of ua_run.c
306 ebl Apply Allan patch that permit to reset recyclepool.
308 kes Test patch -- possible fix or improvement for bug #1053
309 kes Refactor FD and SD status commands to permit new API code in
310 SD, and to fix Win32 build.
311 kes Win32 build is now working.
313 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
314 some ideas in patch from Scott Bailey.
315 kes Begin implementation of duplicate Job control.
316 kes Fix some of Win32 build after recent additions.
317 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
318 which causes the FD to detect whether or not the OS has the
319 honor no dump bit (*BSD systems), and if so, to skip backing up
320 any file with this bit set. The feature is enabled by setting
321 'honor no dump flag = yes' in the Options section of a FileSet.
323 kes Correct po warning message with datarootdir
324 kes Implement more code in dird.c to put configuration parsing in
325 a class rather than use globals.
326 kes Restructure SD status command for implementation of bat API
329 kes Suppress incorrect 'Will not descend from x into y' messages.
330 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
331 daemon globals used by parser.
332 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
334 kes Fix free of plugin_list when none exists.
336 ebl Apply accurate project patch.
338 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
339 on non-mempool object)
340 kes First cut of converting FD .status to work with bat API.
342 .status client=XXX header
343 .status client=XXX running
344 .status client=XXX terminated
345 kes Implement first cut of Copy Job.
346 kes Implement Catalog in Pool resource. It overrides catalog specified
347 in the Client resource.
349 kes Apply patch (with some difficulties) from Joao Henrique Freitas
350 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
352 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
353 ftruncate() actually works. In the case of some (cheap) NAS devices,
354 it does not, and so recycling NAS Volumes does not work. The code
355 simply unlink()s the file, then recreates it. This fixes bug #1011.
357 kes First incomplete cut of big malloc blocks for htable.
358 kes Tweak plugin code.
360 kes Plugin debug code + tweak a couple bat dialog layouts
362 kes Fix creating first JobMedia record during Migration to include
363 proper index. This caused slow restores of migrated jobs.
364 kes Temp fix to plugin name file_index.
365 kes Bacula backed up and restored a MySQL database.
367 kes Implement plugin restore.
368 kes Implement parsing of db_driver to give db_type index.
370 kes First cut of plugin restore code.
371 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
372 and do not strip paths on symbolic links.
373 kes Set catalog backup database and user name from values specified on
374 the ./configure line.
375 ebl Fix #1031 about wrong pool source information in job report.
378 kes Remove a redundant jcr argument to find_files, match_files, and
380 kes Implement '.status dir header|scheduled|running|terminated' that
381 prints the requested status section. With the exception of the
382 header, the other reports have fields separated by tabs (\t).
384 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
385 a resource embedded run command to find a since time if no explicit
386 since time was supplied on the command line.
387 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
388 that updates the state file at job termination time in addition to
389 when the daemon terminates.
391 kes First version where a plugin did a backup.
392 bpipe-fd.so created a backup file, wrote a test
393 string to it, and Bacua could restore this fabricated file.
395 kes Implement DB Driver = string for the DBI driver.
396 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
397 kes First cut of code for loading Win32 plugin dlls. Implement
398 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
399 and implement a dlfcn.h file based on opengroup's definitions of
402 kes First cut plugin directives.
404 kes Apply patch from bug #1049 to prevent stripping the path on a
406 kes Attempt to fix bug #1047 where stripping a path corrupts the
407 heap. Waiting for feedback.
408 kes Correct the Mount message not to suggest labeling a new tape
409 when doing a restore. Submitted by email by John Stoffel.
410 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
411 FD by using casting. Reported in bug #1042.
413 kes A bit of crypto cleanup. More later.
415 Release Version 2.2.8
417 kes Apply patch from Martin to correct bug #1040, bscan sets existing
419 kes Fixed important spelling error in doc -- bug #1045.
421 ebl Fix bextract to be able to extract non-portable Win32 data to
423 kes Move initialization of read/write res lock earlier in the code.
424 This fixes the crash with a null conf file. This fixes bug
426 kes Redefine CURES in lib/parse_conf to be URES and move it all
427 into lib/parse_conf.c -- this responds to bug #1042, but does
428 not fix it. The fix is not to compile with FORTIFY_SOURCE.
429 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
430 the trunk SVN. I don't think this was reported as a bug.
432 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
434 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
436 kes Add DataDespooling and DataCommitting status (committing is
437 the last despooling).
438 kes Finish implementation of new reservations code noted below.
440 kes Fix bsnprintf for float point numbers. I broke recently when
441 parameterizing some variables. This fixes bug #1036.
442 kes Undo recent reservations changes ... will apply them later
443 when they work better.
445 ebl Fixes #1034 which cause mysql to hang the connection after 8h
446 ebl Change default statistics target of filename.name and path.path
447 fields for PostgreSQL. This speeds lookup by indexes. Thanks
449 kes A few more tweaks to new reservation code. Make sure to clear
450 vol released flag when retaking volume. When reading label and
451 label is bad mark volume unused. When recycling, mark volume
452 unused so it can be renamed.
454 kes Fix reserve_volume() so it doesn't release a volume in use
455 (i.e. a volume entry not marked released). This should be
456 the last part needed to fix bug #1018.
458 kes Move Heartbeat documentation from Job to Director resource.
459 This fixes bug #1033.
461 kes Fix existing switch drive SD code to call autochanger to release
462 any old volume. This must be done to keep the autochanger from
463 releasing subsequently newly reserved volumes in doing a close().
464 This should fix bug #1018.
465 kes Fail if attempting to get console input in batch mode. This
466 should help fail RunScript console commands that are incomplete.
467 kes First cut implementing switch_drive() in SD (not actually called).
469 kes Implement first cut running console commands in a RunScript.
471 ebl Fixes bug #1028 where 'Selection Type' option was not usable
473 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
476 Release Version 2.2.7
478 kes Add new free_tls() entry point so that Win32 builds.
479 kes Fix compile warning in src/lib/util.c
480 kes Fix entry point for edit_job_codes() so that Win32 builds.
481 kes Fix seg fault Frank Sweetser reports in regression testing
482 on his systems. The problem was that the original author of
483 bsnprintf.c did not take into account the side effects of
484 using ++x in the argument to a #define.
485 kes Make SD protocol backward compatible with version 2.2.x.
487 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
488 because Bacula no longer restores sockets.
489 ebl Always use ignorecase fileset option on win32 FD.
491 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
492 that implements double quoting include names in conf files,
493 and also allows piping input by having the first character
494 be a vertical bar (|).
495 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
496 that implement %f in RunScripts to pass the FileSet name.
497 kes Skip leading | when lex input comes from a pipe as suggested
498 by Michael Stapelberg <michael@stapelberg.de>.
500 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
501 Nerijus Baliunas <nerijus@users.sourceforge.net>
503 kes Implement Plugin Directory and plugin events.
505 kes Implement a security enhancement: TLS authentication but no
506 encryption. Enabled by setting 'TLS Authentication = yes'.
507 Note when this is on, TLS encryption is turned OFF!
509 kes This patch corrects a problem where the maximum concurrent storage
510 jobs counter gets out of sync during restore jobs causing jobs to
511 'wait on max Storage jobs'. This patch fixes bug #1009.
513 kes This patch fixes bcopy so that it produces correct Volumes.
515 kes This patch eliminates spurious output to the console during a VerifyVolume
516 job that contains encrypted data. It fixes bug #1024.
518 kes This patch prevents the 'status dir' command from trying to use a scratch
519 volume and possibly moving it from one pool to another. This patch fixes
522 kes Add new include to postgresql.c suggested by Marc Cousins so
523 that it compiles correctly with pgre version 8.3.
525 kes Fix --archivedir addition to configure. Replace it with
526 --with-archivedir in configure.in This fixes the regression
528 kes This patch fixes bug #1012 where the job is canceled because
529 of Max Run Time exceeded when the job has not yet started.
531 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
532 one 'part' to write. Instead of each part being stored on disk,
533 written to DVD, then deleted from disk, all parts are written to disk,
534 and only the last is written and deleted from disk.
535 kes This patch fixes the status command to include the formating string for
536 JS_AttrInsterting. It fixes bug #1021.
537 kes This patch should fix the Mac OS X build problem on the latest
538 Darwin, where sys/types.h was not included correctly (apparently
539 due to a change in the Mac headers). The solution was to explicitly
540 ensure that it is defined for the ./configure.
541 This patch also has a rebuild of configure that includes the Debian
542 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
543 kes This patch should ensure that queued messages to the console are
544 displayed as soon as possible. It should fix bug 1007, but has been
545 reported not to work.
547 kes This patch fixes the infinite loop when trying to increase the
548 maximum number of volumes in a Pool during the add command.
549 This patch fixes bug #1008.
551 Release Version 2.2.6
553 db Remove extra data on estimate command in joblist for bat.
555 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
556 really change anything, but is the beginning of doing it *right*.
557 To do it completely right the LastWritten date must be passed to
558 the SD, but it is not yet done.
559 kes Minor tweaks to some bat restore SQL.
560 kes This patch fixes bug #1003 where putting the message output from
561 a Verify job into the catalog results in a recursive loop. The problem
562 seems to show up only with postgresql (to be verified).
563 kes Correct %x to %p in postgresql debug statement.
565 kes Fix bug #942 where lots of emails where generated when the heartbeat
566 interval was low and Bacula wanted a different tape from the one in
569 ebl Add new SD despooling attributes and Dir inserting attributes
570 job status codes in the catalog (Status table).
572 ebl Use qmake-qt4 instead of qmake when available (debian system).
574 kes Add a security warning to src/cats/make_catalog_backup.in indicating
575 that passing the password via the command line (arg 3) is insecure.
576 This responds to bug #990 (it doesn't fix it).
578 kes Set default debug_level to zero. This corrects bugs #991 and #993.
579 kes Fix a crash in bat when it cannot connect to the Director for example
580 if the Director is not running.
581 kes Remove redundant INDEX (JobId) from File table in the trunk.
583 kes Make explicit exception to GPL in LICENSE to permit linking
584 the Win32 FD with Microsoft VSS code.
585 kes Apply the Solaris package patch from
586 Masopust, Christian <christian.masopust@siemens.com>
587 kes Apply the patch to optionally add a timestamp in the debug output
588 submitted by Mariusz Czulada <manieq@wp.eu>.
590 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
591 backend (sql_strerror). Fixes bug #989
593 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
594 It applied with no problems.
595 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
597 kes Redirect stderror to stdin on mt status command in mtx-changer.in
598 since the status is returned on stderr on Solaris.
599 kes Activate Close button on tray-monitor window. This fixes
601 kes Check for NULL item in parse_conf.c before calling it. In the
602 case of Device, there is no item and this caused a seg fault when
603 Device appears in the conf file.
604 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
605 avoids pulling in config.h multiple times in some new code.
607 kes Fix spurious warning message printed when creating a volume with
608 a LabelFormat. This fixes bug #976.
610 Release Version 2.2.5
612 kes Add JobId in place of Job name in all the Jmsg() output.
613 kes Correct the APP_DESC for the Win32 storage service (remove an e).
615 kes Make maxvol-test and new more strict maxvol2-test work.
616 kes Print JobId in all Jmsg() job output.
618 kes Add new SD despooling attributes and Dir inserting attributes
619 job status codes. This fixes bug 961.
620 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
622 kes Fix doc issue. This fixes bug #963.
623 kes Fix listing performance problems in bat. Pointed out by
625 kes Remove old debug code.
626 kes Fix bat code that tests for Win32. This should fix bug #968
627 kes Query 5 list wrong Vol after migration. This fixes bug #960
629 ebl Fix #969 where user can't change Replace option in restore menu.
631 kes Save jcr in thread specific data (tsd) for each thread.
632 kes Make Dmsg() print JobId as -%u.
633 kes Make Jmsg, Emsg, and others automatically pickup the jobid
634 for the thread if it exists.
635 kes Remove old reservation debug jid code.
636 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
637 ebl Add an option that permit to specify spool size in job
638 definition. (Applying patches/testing/spoolsize_per_job.patch).
639 You must upgrade SD and DIR at the same time.
640 dvl Add new configuration item --archivedir
641 dvl Adjust regression tests to use tmp not /tmp. This will allow
642 multiple concurrent runs of the regression tests.
644 kes Fix race condition that drops final block written to volume.
645 This happens in rare cases with multiple simultaneous jobs
646 when the Volume fills. This fixes bug #964. May be related
647 to bug #935 and possibly #903.
648 kes Eliminate more strerror() and replace with bstrerror().
649 kes Remove BSD getopt and replace with unrestricted IBM version.
650 kes Fix Win32 build for changed calling sequences.
651 kes More tweaks to the mount volume routines to get everything
652 right. Changed variable name from find to have_vol, which is
653 much easier to understand.
654 kes Enhance btimer debug code.
656 kes Fix FD->SD authorization failure, which was due to spurious
657 wakeups from a pthread_cond_timedwait(). Simply check the
658 predicate before continuing. This fixes bug #953.
659 kes Add const char where needed (more to do). Remove temp debug code.
661 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
662 kes Don't overwrite error message in check_tables_version.
664 kes Unlock batch insert tables with same calls used elsewhere.
665 kes Allow starting 59 jobs a second.
666 kes Make SD session key more random.
667 kes Add retry for SQLite opening db if it fails. Probably helps
669 kes Suppress extra error messages during batch insert failure.
671 kes Add jcr to timer packets so if killed message can be sent to job.
672 kes Add JobId to all Dmsg() output.
673 kes Put some FD auth code on dbglvl rather than fixed.
674 kes Return insert attributes error message in db msg buffer to avoid
675 false error messages. Helps fix bug #966.
676 kes Separate batch init error messages. Probably helps fix bug #966.
677 kes Make SD code that contructs attribute insert check string lengths
679 kes If Dir gets an error during inserting attributes, cancel SD.
680 This reduces unnecessary error messages.
682 kes Correct search boolean for getting Volume info
683 ebl Cleanup batch insert code. Probably fixes bug #965.
684 kes Back out one small change to the reservation system (reserving a volume).
685 kes Rework how a Volume is mounted. It is now much more intelligent and
686 will always attempt to use any mounted volume if possible and reduces
687 calls to the Director asking about volumes.
689 kes Turn off some code when batch insert not enabled.
690 kes Edit FD name in connect error messages.
691 kes Rework the reservation system to take into account that the Director
692 might give us a Volume that is different from the current one being
693 used, and to ensure that we don't exceed Maximum Volume Jobs.
694 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
695 fatal error with multiple jobs running'
696 kes Add more debug code in reservation system.
697 kes Implement maxvol-test to check bug #947.
699 kes Add code to handle tray monitor separated from Win32 FD.
700 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
702 kes Add missed return in fixing verify bug -- trunk only.
703 ebl Fix a command parser issue causing a director segfault.
704 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
706 kes Increase the max block size to 4MB fixes bug #957.
707 kes ERABT if user sets min block size > max block size. Fixes bug #956.
708 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
709 is not properly mounted (recognized) during a poll.
710 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
711 Job that has differences reports Verify OK.
712 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
714 ebl Add an option to operate on all pools with update vol parameters.
715 This complete the project 20. Patch from Nigel Stepp.
716 ebl Add history support to bconsole when using readline.
717 Using Ctrl-D to exit doesn't update .bconsole_history
718 kes Modify new volume algorithm to use max MediaId for generating next
719 volume number rather than the count of Volumes. This should essentially
720 eliminate the failure rate if some volumes were deleted. Bug #921.
721 kes Begin implemention of Optimize Job Scheduling.
722 kes Implement restore callback that Dirk and I agreed on for bat
723 restore. This fixes bug #928. Restore of backup of zero files fails.
724 kes Fix SQL Catalog logging which broke with new db_escape_string
727 Release Version 2.2.4
729 kes Fix bacula_cats.def for new db_escape_string().
730 kes Increase size of name string when FD making connection to SD.
731 May fix bug #953. FD->SD connection failure.
733 kes Add code to help Dan debug 2drive-incremental-2disk test.
734 kes Add code to try to fix bug #908.
735 kes Add waits to multiple exit detection code to try to force pid
736 file to always be deleted.
737 kes Restore good dev.tar.gz to rescue set appropriate binary property.
739 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
740 trying to switch drives by checking for blocking before unblocking.
742 kes Cancel storage daemon in all cases where FD reports error. This
743 should fix virtually all cases of bug #920.
744 kes Fix db_escape_string() for MySQL which did not compile.
746 kes Fix error message that was clobbered when Dir tells SD it does not
747 have write permission on Volume. This should fix a minor point
748 in bug #942, but not the main problem.
749 kes Add code to cancel job in SD if FD connection fails. This should
751 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
752 dvl Pass jcr and db into db_escape_string() to enable better escaping
754 kes Fix migration code to get correct Volume name with multiple volumes
755 by skipping |. Fixes bug #936.
756 kes Implement patch supplied by Landon to fix bug #944 where using
757 TLS with bconsole uses 99+% of the CPU.
758 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
760 kes Move patches into patches directory.
762 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
765 ebl Using 'm' in bconsole will show messages like before,
766 and not memory usage.
767 kes Fix bug #935, and probably also bug #903 where files were not
768 restored. MediaId was not properly set in JobMedia record after
771 kes Suppress chown and chmod error messages if the FD is not running
774 kes Apply Martin Simmons' patch that should turn off the new API usage
775 when batch insert is turned off allowing building on older
777 kes Add ./configure search in qwt-qt4 for qwt package
779 kes Bacula is now free of 3rd party GPL copyrighted code!
781 kes Add guid_to_name.c/h which replace idcache.
782 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
784 ebl Detect if new PosgreSQL batch insert API is present.
785 kes Correct incorrect mempool call causing Director crash. Occurs on
786 systems without va_copy().
787 sb Update spec files for 2.2.1 release
789 kes Fix memory pool call in ua_output.c. bug #934.
790 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
791 Add test program to fnmatch.c
793 kes Integrate patch to README.vc8 from
794 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
795 edit it to get it into Unix patch format.
796 kes Implement mkpath.c to replace old FSF makepath.c
798 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
800 Release Version 2.2.1
802 kes Update POTFILES.in
803 kes Cleanup a few underquoted AC_DEFUNs in configure
804 kes Apply patch from Martin Simmons that adds a test for va_copy to
807 kes Fix bug #921 by increasing the number of tries to create a new volume
809 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
810 can be called multiple times. Implement a version for machines
811 without va_copy() that gets a big buffer.
813 kes Integrate more portable zone offset code into bsmtp.c
814 Submitted by Attila Fülöp.
816 kes Fix bad SD->FD return status reported by
817 (James Harper) <james.harper@bendigoit.com.au>
818 ebl Fix a bug in read_close_session which return random status
819 thanks to James Harper
821 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
822 and directory names during restore of single file/directories.
823 kes Add sanity checks to .sql command when string is empty. Hopefully
824 that will resolve Dirks Director crash.
826 kes Apply patch submitted by Martin Simmons that corrects a seg fault
827 in the bsmtp chat subroutine when debug is >= 10.
829 kes Fix Director crash when running bat SQL queries.
830 kes Add David's notes on Item 8: Copy pools.
832 kes Rework projects file to be current and ready for a vote.
833 kes Enhance lex scanner error message.
835 kes Tweak LICENSE file to mention BSD code.
836 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
837 if specified on the ./configure.
838 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
839 This class is intended to allow us to open a second bsock to the
840 Director while in the restore subdialog.
842 kes Fix configure to create bat Makefile before creating dependencies.
843 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
844 kes Add a tooltip to the tray monitor.
845 dvl Set the Director's PID file before dropping privs. This fixes
848 kes Update AUTHORs file
849 kes Increase the default max concurrent jobs to 20 in FD and SD to
850 correspond with the default .conf files.
851 kes Rewrite the Win32 service routines. This eliminates the 3 copies
852 some different, of the same file created by RN when porting the
854 kes Rearrange some of the Win32 directories and the placement of the files
856 kes Set DEVELOPER flag in version.h
858 ========================================================================
859 Release Version 2.2.0
861 kes Apply a second doc patch from Marc.
862 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
863 improves the tips section that discusses how to setup multiple
866 kes Update bat README file.
867 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
868 corrects a typo in the Recycle status check in db_find_next_volume().
869 This will probably fix a number of annoying problems with multiple
871 kes Modify most of dird/msgchan.c to use bsock class calls rather than
872 bnet calls -- no functionality change.
874 kes Modify the Verify output to specify if files are missing on
875 the Volume(s) or disk. Fixes confusion in bug #916.
876 kes When more than one Volume is read in a migration job, the last
877 Volume bytes reported are from the last read volume rather than
878 the last written volume. Fixed. This fixes bug #910.
879 kes Fix display of Recycle flag after update volume=foo recycle=yes.
880 It previously printed New Recyle flag is: no. This fixes bug
883 kes Correct seg fault when switching tape drives during restore.
884 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
885 be used until after 2.2.0 release.
887 kes Remove fnmatch() in SD that permitted wild card specifications.
890 kes Fix %g in filename returned by SQL for browse tree reported by
892 kes Fix configure so that it puts config.out in the cwd rather than
894 kes Attempt to fix the locking problem reported by Eric in bug #906.
895 kes Make berrno class to leave errno unchanged after constructor call.
896 kes Make bnet_server use the heap rather than the stack to allocate
897 its socket fd pointers to avoid a crash at termination. Problem
898 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
900 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
901 and putting it in depkgs-qt along with Qt4.3.
903 kes Rework code in acquire.c that switches drives for reading when
904 the Media Type does not match. This should fix bug #906
906 ebl Fix a director segfault during job setup #907
907 kes Correct seg fault in postgresql when first operation returns no
908 rows. Fixes Dirks File browser problem seg fault with bat.
910 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
911 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
914 kes Implement PopUp YES/NO dialog for bat.
916 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
918 kes Correct RunScript to terminate job in FD on failure.
919 kes Change abort_on_error and AbortJobOnError to fail_on_error
920 and FailJobOnError in RunScripts.
921 kes Minor tweaks of code formating in RunScripts, principally to
922 avoid depassing 80 columns.
924 kes Eliminate one #ifdef Win32 in bsmtp
925 kes Implement grow tool to grow a file for testing very large databases.
926 kes Add big-vol-test to test Bacula seeking with > 5GB.
929 kes Modify find_next_volume() to return all values in Media record.
930 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
934 kes Update Release notes
936 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
937 Warning, in previous beta version, all media get from scratch keep their
940 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
941 This should fix bug #842. Made a note to look at removing the temp
942 files at the end of the install.
943 kes Add ability to mount and unmount a file device providing it is
944 marked as being removable and has the appropriate mount and unmount
945 commands defined in the Device resource. This fixes bug #830.
946 kes When applying a storage override, release all previous storage
947 definitions rather than just prepending the new storage.
948 This should prevent a good deal of confusion.
950 kes Implement ./configure search for qwt libraries.
952 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
953 Win32 FD. This should fix bug #893.
954 kes Remove an unnecessary beep in Win32 init code.
955 kes Update copyright dates in Win32 executable about boxes.
956 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
957 code with a BSD getopt.c and getopt.h.
958 kes Remove sched.h from the Win32 compat directory -- not used.
959 kes Remove the Exit menu item from the Win32 tray monitor. If you really
960 need to shut it down, do it through the services panel or the command
962 kes Remove some inappropriate Bacula FSFE copyrights.
963 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
964 kes Fix regress config non-portable test as pointed out by
965 Florian Heigl <florian.heigl@gmail.com>
966 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
967 as pointed out by Florian Heigl <florian.heigl@gmail.com>
969 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
970 Reported by Frank Sweetser.
974 kes Fix client-only build.
975 kes Integrate client-only fixes for bsys (initgroups) and conio from
976 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
977 kes Make arguments to get_scratch_volume() in same order as other
979 kes Rework the prune_volumes() subroutine so that after purging and
980 no volume found in desired pool, it will check for a scratch
981 volume. This prevents recycling the whole scratch pool.
982 kes Add code to status storage to print boffset_t (largefile support).
984 kes Move qwt (Graphics libarary for Qt4) to depkgs.
985 kes You now need a --with-qwt=<dir> to be able to build bat.
986 kes Update src/win32/cats/bacula_cats.def to include the new
987 db_get_query_dbids() call on Win32.
989 kes Correct a problem when selecting a scratch volume and moving
990 it to another pool that lost some columns.
991 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
992 kes Enhance Autochanger error messages to include Volume and device name.
993 kes Rework prune_volumes() code to take account of InChanger flag,
994 and to handle recycling volumes going to the Scratch pool and
995 current pool because the RecyclePool directive.
996 kes Implement a better and more efficient db_get_query_dbids() to
997 handle creating and passing back a list of DBIds.
1001 kes Start work on new more efficient DBId subroutine. First use
1002 will be for recycling volume to Scratch inchanger.
1003 kes Increase number of JobIds in pruning from 1000 to 10000.
1004 This to be replaced by above routine.
1005 kes Begin implementation of building Qt4 on Win32.
1006 kes Correct typo in fix I added for bad TLS shutdown.
1007 kes Pull 2.0.3 patches into patches directory.
1008 kes Update Release notes. Include qt-console in line count.
1009 kes Update Projects file.
1011 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1012 bug in migration code where a job that spanned two volumes
1015 kes Implement new BST_DESPOOLING blocked state. Change from locking
1016 during despooling in SD to blocking. This means that other threads
1017 can work with the device structure, in particular the reservations
1018 system while despooling.
1020 kes Fix return in reservation message queue that missed clearing
1021 the jcr lock (implemented 26Jun07 below).
1022 kes Rename a number of dev methods to make locking function names
1024 kes Document locking in lock.c. Move lock structures to new file
1027 kes Move reservations message lock to lock jcr only this
1029 kes Move main SD locking code into lock.c (new file).
1030 kes Update Win32 build to include lock.c
1034 kes Dirk committed the qwt library code for drawing graphs in bat.
1035 kes Tweak install of qwt so that it is integrated with ./configure.
1037 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1038 out by Eric (my typo).
1039 ebl Fix configure.in to get batch mode enable
1040 kes Return correct string from authenticate.cpp in bat when connecting
1042 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1043 spurious line drops when using TLS.
1044 kes Do not file reparse points when restoring a file that already
1047 kes Implement Windows reparse points -- similar to directories, but
1048 we do not descend into it. This is a first cut. They seem to
1049 be backed up, but restore is not yet tested.
1050 kes Remove restore_blocking in tls code when shutting a socket to leave
1051 it in blocking mode. Hopefully this will fix the encryption bug
1052 reported by Frank Sweetser.
1053 kes When opening a file for backup, tell the OS that we are going to
1054 read it sequentially -- optimization.
1055 kes Change variable names in authenticate_director() to not conflict
1056 with member names in bat. Caused great confusion with compiler,
1059 kes Queue openssl error messages in case of comm problem.
1060 kes Do shutdown() call if socket terminated.
1061 kes Remove some duplicated code in tls.c
1062 kes Move more of the bsock member variables into private and access
1064 kes Add Frank Sweetser's tls-test to the regression suite.
1066 kes Add Swedish sv.po file
1068 kes Don't print clock skew message in FD if less than 3 seconds diff.
1069 kes Add a bit of VSS info to status client.
1070 kes Implement a first cut of Vista VSS, using Win2003 code.
1072 Release: 2.1.20 beta
1074 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1075 loaded tape but uses first drive).
1076 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1077 This was indeed a Win32 issue.
1079 kes Simplify search of autochanger for in-use Volume.
1080 kes Fix exit condition of check for in-use volume. kes Remove
1081 inappropriate my_postgresql_free_result() in db_close()
1083 kes Fix bad return in FD when encryption signature not found.
1084 Probably caused a crash.
1085 kes Inhibit missing encryption signature error messages for
1086 file types where no signature computed.
1087 kes Correct inverted check on autochanger in reservation system.
1088 kes Tweak debug code in autochanger reservation.
1090 kes Add some additional locking in the cats directory in subroutines
1091 that modify packet variables called from batch insert.
1092 kes Rework how dcrs are allocated. new_dcr() can now be called
1093 with an existing pointer, and it will simply clean it up.
1094 This allows the reservation system to test various different
1095 devices, and will permit easy device changes.
1096 kes A bunch of changes all over to handle new new_dcr() calling
1098 kes Work more on the Volume management in the SD. Remember Volumes
1099 for tape drives and for autochangers (even virtual disk changers).
1100 kes When looking at the Volume list to reserve a drive, handle
1101 autochanger names correctly by interating through the changer
1102 devices. Also call the Director to see if a Volume is suitable
1103 for the current job.
1104 kes Fix some bugs in bscan. Make sure all media records are written.
1105 Make sure that valid JobMedia records are written for disk files.
1106 Previously they were completely wrong.
1107 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1108 that the URLs don't change and so that the developers will all
1109 work off the same copy. Rebuild from scrach.
1110 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1112 Release: 2.1.18 beta
1114 kes Fix seg fault in FD from incorrect digest size.
1115 kes Fix argument to non-OpenSSL crypto.c subroutine.
1117 Release: 2.1.16 beta
1119 kes Remove a few malloc()s from the encryption code.
1120 kes Use the class calls to bsock in filed/backup.c and restore.c in
1121 place of the old bnet_xxx code.
1122 kes Implement code that does an on the fly calculation of the
1123 signing digest during restore of encrypted files. It makes
1124 a best guess at the algorithm, and if it is not correct, will
1125 then revert to the old code which reads the file after it is
1127 kes Implement at least one missing crypto stream in stream_to_ascii()
1128 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1129 #877 where a reload with bad syntax causes Dir to exit.
1131 Cut: 2.1.14 beta (not released)
1133 kes Do not free a volume on a tape drive until another volume is
1134 mounted and read, or the autochanger unloads the volume.
1135 This should help the SD re-use volumes that are already mounted,
1136 and should fix bug #886.
1137 kes Apply patch from user brettedgar that allows gnome2-console include
1138 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1139 kes Apply patch from Lucien Weller that fixes day of week calculation
1140 because of DST flag problem. Fixes bug #887.
1142 kes Move find_next_appendable_volume() to after acquiring a valid device
1143 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1145 kes Unable to reproduce bug 872. However added additional testing for
1147 kes Bug #874 resolved by documenting SQLite limitations.
1148 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1149 kes Bug #881 resolved by removing typo in mtx-changer script.
1150 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1151 approval. Added a link to the wiki on the web page, and implemented
1152 a backup from http://paramount.ind.wpi.edu
1154 kes Fix update allfrompool to pass pool name.
1156 kes Convert to pure GPL v2 license.
1157 kes Fix sscanf problems reported by Peter Buschman that caused
1158 a bus error on Solaris.
1159 kes Rework (simplify) the select prompt in bat.
1160 kes Move get_jobid_from_tid() into lib and create a
1162 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1163 should definitely fix the problem of lost error messages in the
1165 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1166 kes Eliminate tcpd.h from the project. Enclose the #include from the
1167 library with extern C ...
1168 kes Add print of signal name when a signal is trapped.
1170 Release: 2.1.12 beta
1172 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1174 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1175 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1176 makes SQLit3 run 30 times faster, though a bit less safe.
1177 kes Implement --with-batch-insert in configure and detection of thread
1178 safe libraries. It is on by default, but turned off if no thread
1179 safe library (e.g. SQLite 2) is available.
1181 kes Fix Bacula PostgreSQL buffer overruns.
1182 kes Do better checking for NULL results returned from PostgreSQL;
1183 implement retry for failed queries; clear results buffer after
1184 failed query. Hopefully this will correct the PostgreSQL failures.
1186 kes Implement algorithm to handle only one appendable volume with
1187 Prefer Mounted Volumes = no.
1188 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1189 returned from a query.
1190 kes Make volume lock recursive.
1191 kes Implement an additional volume reservation algorithm that
1192 starts by considering all reserved volumes then uses the
1193 old brute force algorithm of searching the resources to
1194 find a suitable device.
1195 kes Add new reservations debug code and refine the old code.
1196 kes Update the win32/dll/bacula.defs file.
1198 kes Tweak reservations algorithm to permit a few more cases, i.e.
1199 volume reserved, but on different drive, ...
1200 kes Enhance SD status to include Pool and Media Type for drive in a
1201 more readable format (a bit longer).
1202 kes Fix PostgreSQL double free.
1204 kes Minor refactoring of restore decryption code.
1205 kes Add code to smartall.c to detect double free of a buffer.
1207 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1208 so that bsmtp will create a correct email address (mailbox only).
1209 kes Modify 'memory' command so that the buffers are listed as 'In use'
1210 to avoid confusion with Orphaned buffers.
1211 kes I reworked the OpenSSL include/lib flags to be handled in
1212 the standard Bacula way, which should fix bug #863 concerning
1213 non-standard OpenSSL libraries.
1215 kes Implement Help Browser window for bat.
1216 kes Fix reload bug that reset StorageId to zero.
1218 kes Fix TLS #ifdefing when TLS turned off.
1219 kes Ensure that when labelling a tape with Slot=0 that InChanger
1221 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1223 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1224 add DISTINCT (required by PostgreSQL).
1225 kes Implement BSOCK authenticate_director() method. Eventually will
1226 authenicate all daemons.
1227 kes Move several more functions into the BSOCK class.
1229 kes Add code to tell the OS that we no longer need a cached
1230 file that we were reading. In findlib/bfile.c. Also,
1231 only cache files that we are reading. Thanks to
1232 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1233 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1234 kes Implement script to automatically generate cats and dll .def
1235 files for Win32 dll.
1236 kes Update README.mingw32 to include new .def file generation.
1237 kes Correct typo in UTF-8 error message as reported by:
1238 jhernandez <julianhernandez@gmail.com>
1239 kes Add additional sm_check() code on debug level 1.
1240 kes Set default debug level to 1.
1241 kes Trap SIGABRT in attempt to get traceback.
1243 kes Reduce bat connect timeout from 30 to 15 seconds.
1244 kes More restructuring and implementing BSOCK class in place of
1246 kes Remove a few unnecessary malloc() tests in crypto code.
1247 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1248 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1249 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1251 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1253 kes Fix Verify InitCatalog. The attributes were not pointing to the
1254 correct saved location.
1255 kes Implement message callback so that GUI is sure to get all
1256 daemon messages. Currently displayed in a dialog in bat.
1257 kes Ignore SIGUSR2 (Bacula timer) in bat.
1258 kes Apply regress patch from bug #859 to allow regress to work
1259 with Solaris compiler.
1261 kes Begin adding TLS support to bat.
1262 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1263 clean up lex.c and make it more readable.
1265 kes Move more bnet functions into the BSOCK class.
1266 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1267 kes Complete change of berrno strerror() method to bstrerror()
1269 Release: 2.1.10 beta
1271 kes Cleanup incorrect email addresses in bsmtp.
1272 kes Make bat display initial messages rather than discard them.
1274 kes First cut of adding .mod to the run command.
1275 kes Implement auto display of messages in bat.
1276 kes Enhanced preferences to allow all Bacula output to be
1279 kes Try to make bsmtp date routines more generic.
1280 kes Fixed bug #856 autochanger documentation.
1281 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1282 kes Add new cats entry point so Win32 builds.
1284 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1286 kes Do better checking for the MySQL 64 bit libraries looking for both
1287 .a and .so libraries.
1288 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1289 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1290 kes Require the thread safe version of MySQL during configure. Thanks
1291 to Andre Noll for pointing this out.
1292 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1293 continuing in migration code.
1294 kes Apply implementation of tray-monitor font derived from gnome-console
1295 submitted by Andreas Piesk <a.piesk@gmx.net>
1297 kes Eliminate important memory loss in SQLite
1298 kes Fixed the batch insert MySQL thread specific data that was not
1299 being freed. See cats/mysql.c:db_thread_cleanup().
1300 kes Fix restore before command.
1301 kes Convert old hdr.name to name() in a few places.
1302 kes Implement update jobid command.
1303 kes Return all time_t dates in db_get_job_record()
1304 kes Stop watchdog in SD earlier.
1305 kes Put Pool just after Storage in please mount message.
1306 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1309 kes Update the po files.
1310 kes Fix Verify InitCatalog by making it cache attributes.
1312 kes Change name bacula-bat to bat for man 1 page to correspond to
1314 kes Check for client and store NULL pointers in status command. This
1316 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1317 kes Fix sign extended editing of %p.
1318 kes Clean out a little old #ifdefing in cats/mysql.c
1320 kes If time diff between DIR and FD is more than 600 seconds convert
1321 INFO message to WARNING.
1322 kes Implement heap size display in status for all daemons.
1323 kes Attempt to fix MySQL db open memory loss (not successfull).
1324 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1325 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1326 Query. This looks like a MySQL but but by doing extra releases,
1327 the memory goes away. This should fix bug #847.
1329 kes When backup fails, cancel SD before waiting for sd termination.
1330 kes If SD is waiting for FD to connect during cancel, wake up the
1332 kes Fix fsf code so that errno is correctly reported.
1333 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1335 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1336 so that Bacula doesn't later stumble into a seg fault.
1337 kes Use the term Restore Client in the restore Job report.
1338 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1339 the original job's FileSetId.
1340 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1341 spooling in migration jobs. Not yet tested.
1342 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1343 reading conf file from a pipe. However, do it with open_bpipe()
1344 rather than popen. Not yet tested.
1346 kes Fix an ugly bug where the VolCatBytes were getting updated
1348 kes Implement bconsole memory command that prints current memory
1349 usage, plus smartalloc dump.
1350 kes Clarify some error messages in backup, admin, and migrate.
1351 kes Shrink label dialog to smaller size.
1352 kes Invert Cancel OK buttons on restore to be OK Cancel.
1353 kes More strerror() to bstrerror() conversions.
1355 kes Start implementing bstrerror() in place of strerror().
1356 kes Stripping path -- seems to work.
1358 kes Prevent door and port files from being restored (mostly
1360 kes Free an unreleased buffer in compat code.
1361 kes Change console Job name from *Console* to -Console- to eliminate
1362 Win32 filename problems. Put Win32 path separator when creating
1363 Console file. This fixes bug #846.
1364 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1366 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1368 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1369 to force Win32 error message.
1371 kes First cut strip path. The data should be passed to the FD,
1372 but nothing is done with it yet.
1373 kes Enhance the digest and signature routines in the crypto
1374 library to accept a JCR and to use it to print error messages
1375 so that they will go in the Job report rather than the daemon's
1377 kes Simplify some of the verify signature code.
1378 kes Simplify a few of the alternative returns in the signature
1381 ebl Use only POSIX regex instead of GNU regex in breg.c for
1382 File relocation. It fix broken freebsd compilation.
1383 kes Convert all other Dir files to use new ua class message
1385 kes Tentative fix for missing digest signature in bug 807.
1386 kes Correct handle problem in new win32_ftruncate routine.
1387 kes Convert ua_purge.c and ua_update.c to use new ua class
1388 message routines for bat.
1390 kes Correct incorrect installation of LICENSE in Win32 installer.
1391 kes Display LICENSE at the beginning of the Win32 install.
1392 kes Attempt to correct the need for the png files to be installed
1394 kes Reapply my bat.conf install script in qt-console. I think I
1395 editted bat.pro instead of bat.pro.in and it was lost.
1396 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1397 the /var/lock/subsys for subsysdir. Also corrects typos in the
1400 kes First cut update job.
1401 kes Correct configure to include qmake of src/qt-console directory.
1403 kes Make restore job yes/mod/no print in one command so GUI works.
1404 kes First cut implementing backup and restore client.
1405 kes Correct editing in Verify output that caused a seg fault.
1407 kes Insure that bat.conf is not overwritten during installation.
1408 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1409 while I was implementing migration in March 2006 !
1411 ebl Cleanup file relocation, using char *RegexWhere instead of
1412 char *where + bool where_use_regexp
1413 kes Update some manpages and add bat manpage.
1414 kes Make a first cut at converting bacula.spec.in for bwx-console
1416 kes Apply patch from John Goerzen to add hostname as fourth argument
1417 to make_catalog_backup script.
1418 kes Fix typos I introduced into bsmtp.c
1419 kes Make pm_strxxx() routines handle input of NULL pointer. This
1420 is to protect from NULL pointers returned from SQL databases.
1421 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1422 kes Add more debug to FIFO code -- fix fifo regression test.
1424 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1425 kes Add thread timer to bnet_connect() to break from OS if wait time
1428 kes Update Win32 build to include new files, new symbols, and
1430 kes Implement socket level heartbeat (tcp_keepidle)
1431 ebl Commit File relocation patch
1432 kes Make bat have 'make install' target.
1433 kes Warn during install if old gnome-console binary found.
1434 kes Warn during install if old wx-console binary found.
1435 kes Add -8 option to bsmtp command line to add content type utf-8.
1436 Fixes bug #809. (Character coding problem in bsmtp).
1437 kes If < is found in target (from, to, cc) then do not enclose the
1438 target in < > in bsmtp. Fixes bug #772 (malformed address).
1439 kes When printing certain items in dbcheck, stop after 300000.
1440 Fixes bug #822. (dbcheck loops).
1441 kes Incorrect status in Dir after waiting for mount with poll set.
1444 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1446 kes Print waiting to reserve a device every 5 mins.
1448 kes Don't call close_part in label.c if tape and relabel.
1449 kes Don't free volume if busy in close() -- should help with
1451 ebl Fix #824 RunScript bug (After script could be execute twice)
1452 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1453 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1454 Add a regression script to test RunScript
1456 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1459 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1460 deprecated. No additional bugs will be fixed, and they will be dropped
1461 in a future release (probably 2.4.0).
1462 kes Change name of wx-console to bwx-console to make it more Bacula
1464 kes Change the name of gnome-console to bgnome-console to make it
1467 kes Some time in March, a Feature Request with patch from Jorj Bauer
1468 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1470 The ability for the director to validate a Client (FD) CN against
1471 an arbitrary set of patterns rather than the hostname, with
1472 A new 'TLS Allowed CN' set of directives which are implemented
1473 in the Client resource. Then pattern matching is used in place
1474 of hostname matching against the Certificate's CN. As an example, we
1475 have certificates which (a) use a local CA, and (b) have a CN of the
1477 kes Add new/changed entry points to Win32 build
1478 kes Create unaccepted-projects for projects that are not accepted.
1479 kes Simplify locking in the reservations system.
1480 kes Add more debug code in reservations.
1481 kes Make sure error condition on reserving a volume is handled correctly.
1482 kes Correct handling of volume_in_use.
1483 kes Correct handling of initializing a device.
1484 kes Move handling of broadcasting releasing a device into release_device().
1485 kes Correct attaching dcr to dev so that it is only done if device
1486 is properly initiated.
1488 kes Locking debug level tweaks in SD.
1489 kes Tweak new Volume code.
1491 kes Add exec external-command [wait-seconds] to bconsole. This
1492 executes the external-command. Note! normally external-command
1493 should be enclosed in double quotes.
1494 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1495 it should normally be off in a production system.
1497 kes Implement die command for SD so that we can force it to dump.
1498 kes Implement SD lock debug code.
1499 kes Implement new algorithm for keeping Volume list in SD. It
1500 is now owned by the device.
1502 kes Implement new code for freeing in use volumes that should
1503 resolve if not all, some of the problems of multiple drive
1504 tape conflicts described in bug 801.
1506 kes Fix gui/bacula-web/images files in svn.
1507 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1509 ebl Fix a bug in batch mode (in string escape)
1510 kes Correct migration prune SQL typo that crept in in a
1511 recent 2.1.x change.
1513 kes Move bnet_despool() into class in bsock.c
1514 kes Modify job report to include director name and Build OS.
1515 kes Move drop root privilege and check_catalog() before fork.
1516 kes Add update database scripts (version 9 to 10) to updatedb directory.
1518 ebl Check size and age of each file after its backup to see if
1519 it has changed during backup, if 'checkfilechanges' is set.
1520 The FD will do an extra check (stat(2)) after
1521 each file backup. mtime, ctime and size are compared with
1522 'before backup' information. If time or size mismatch, an
1523 error message will be generated. You must upgrade FD to use it.
1525 kes Make database name and user configurable
1526 --with-db-name=xxx --with-db-user=xxx
1527 kes Add back database type to message.c for debugging.
1529 kes Implement dir_sql() which issues an SQL query.
1530 kes Modify bat medialist to use dir_sql() and do some minor C++
1531 formatting as well as eliminating a number of pointers, simplifing
1534 kes Fix some of the mtx-changer grep commands for tape label readers.
1535 kes Convert a number of bsendmsg into the appropriate send/warning/error
1536 message class calls.
1537 kes Suppress the using database message in the .sql command.
1538 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1540 kes Add context menu for floating a window.
1541 kes Some minor cleanup and name changes in qt-console
1542 kes Add doing mt setblk 0 in Win32 mtx-changer.
1543 kes Apply Martin's bug fix to move definition of ENODATA for
1545 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1546 sqlite2 and sqlite3.
1548 kes More pruning cleanup.
1549 kes Turn on wait_for_drive by default in mtx-changer.
1550 kes Turn on Batch insert code by default as it now passes regression.
1551 kes Add ./configure --enable-bat to enable building of Bat.
1552 No install yet though.
1554 kes Implement a new .sql command for bat.
1555 kes Implement code to turn off pruning in obtaining the next volume.
1556 Pruning is turned off for the status dir command, but turned on
1557 for SD requests and for the list nextvolume command.
1559 kes Correct Qmsg() that was not updated correctly when committing a
1560 previous change (probably the recent TLS patch).
1562 kes Write new subroutine is_volume_purged() that explicitly checks
1563 if the Volume is purged, and if so marks it as such. This should
1564 resolve problems reported about needing to mount twice to recycle
1566 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1567 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1568 amount of duplicated code.
1569 kes Do volume pruning only for the Media Type desired (reduces pruning time
1570 if multiple Media Types are in the same pool).
1571 kes Implement more detailed info in the Job report for the Bacula version
1573 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1575 ebl Add bbatch tool to bench database and insert mode.
1576 Fix sql quote stuff in batch mode
1577 Fix sql stuff for mysql
1579 kes Correct problems with am/pm scheduling. Fixes bug #808.
1580 kes Implement new prunning code that prunes up to 1000 jobs at
1581 the same time. The same technique can be applied to a number
1582 of other prune/purge subroutines.
1583 kes Add an insanity check when starting a new tape job to ensure
1584 that the tape position has not been changed. If so fail the
1586 kes Fix Win32 build for dlls to add the folllowing:
1587 src/lib/bsock.c -- new file with new entry points
1588 src/lib/dlist.c -- new entry points
1589 src/cats/sql_create.c -- new entry point
1590 src/cats/sql_cmds.c -- new DATA item exported
1592 ebl batch mode cleanup bscan-test is ok now.
1593 kes Implement SD code to check length of disk volume before appending.
1595 kes Correct return status on db_batch... routines.
1596 kes Add call to db_write_batch_file_records() to migration code.
1597 ebl Fix AfterJob timing
1598 kes Move the checking of the database in initializion of the Director
1599 to after we drop privileges. This avoids the need for both root
1600 and bacula access to the DB.
1601 kes Correct a misplaced variable definition in src/filed/backup.c
1602 kes Correct how the new batch insert db_create_attributes_record()
1603 uses the arguments. Caused a seg fault in bscan.
1604 kes Implement lock() and unlock() methods in DEVICE class.
1605 Implement block() and set_block(xx) methods in DEVICE class.
1606 kes Modify bnet_connect() so that it uses time() to check for the
1607 wait time expiring (on some OSes, some system calls may not
1608 return immediately).
1609 kes Modify Verify to obtain the previous JobId when it is actually
1610 running rather than at schedule time (as it was in 1.38.x).
1611 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1613 kes When checking pid in pid file, continue running if the pid is
1614 the same as ours. This occurs on IRIX after a system crash.
1617 kes Extend new GUI API.
1618 kes Make the ua structure a class, and implement send_msg(),
1619 error_msg(), warning_msg(), and info_msg().
1621 kes Apply fix from for building wx-console on the Mac from
1623 kes Implement new select mechanism for GUI programs.
1624 kes Reorganize initialization of stackedWidgets in bat.
1626 kes Add updated nagios plugin supplied by Christian Masopust.
1628 kes More bat implementation.
1629 kes File migrate bug with Pool Occupancy using mediaid instead
1630 of jobids. Fixes bug #795.
1631 kes Fix orphaned buffers in filed backup and verify due to
1632 crypto buffers not freed during errors. Fixes bug #789.
1633 kes Extend new GUI api code to tree commands.
1634 kes Ensure that tree and dot commands check console ACLs.
1635 kes Permit marking directory with trailing slash.
1636 kes Allow 20 console connections (instead of only 10).
1638 kes Add smartctl call to bacula-sd.conf as an example of getting
1641 kes Modify jobq.c to let simultaneous restore jobs run. This may
1642 cause them to fail if they cannot get a drive.
1643 kes Add Client Connect Wait to Storage daemon to permit users to
1644 modify the time the SD waits for a FD connection.
1646 kes Correct virtual changer check which was backwards. This caused
1647 volumes to be unloaded into slots already occupied.
1649 kes Apply Command ACL filter to JobId list in restore command.
1650 kes Correct typeo in var.c patch.
1652 kes Don't let Bacula prune File or Job records for the current Job.
1653 kes Fix variable substitution pad + inc bug reported (with patch)
1656 kes Correct SQLite log table index as reported by Luca Berra.
1658 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1660 kes Begin implementing new comm signals for API.
1661 kes Fix a few places in lib/message.c where the open fd may
1663 kes Continue implementing lib/bsock.c (real class). Make jcr,
1664 who, host, and port private. There are new methods to access
1665 them for non-class use. This required touching a number of files.
1667 kes Add LANG=C to autoconf/randpass so it works with languages other
1668 than English. Fixes bug #788.
1670 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1672 You will not be able to generate Include/Exclude list any more.
1673 It will be fixed soon.
1674 If you want to use this, you can apply
1675 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1677 kes Restore of sockets created false error messages because Bacula
1678 no longer restores sockets, but the code was still trying to
1679 set the attributes on a non-existent file. Reported by a user.
1680 ebl finish RecyclePool feature
1681 Media will takes Pool.RecyclePool
1682 when moving from Scratch to a Pool or when user will do
1683 update volume=xxx frompool
1684 To use it, add RecyclePool = aPool to your Pool resource
1687 RecyclePool = Scratch
1691 kes Expand new BSOCK class adding signal() and new BNET signals.
1692 kes Begin enhancing the dot commands adding a new API function
1693 that returns more information and will make it easier
1694 to interface to the Director from a program.
1696 kes Make DEVICE fd private. Its new name is m_fd, and can be
1697 obtained with dev->fd() outside the class. This is the
1698 first of many DEVICE members to be made private.
1699 kes Implement Michael Renner's idea on having a virtual disk
1700 changer. I made some minor modifications (e.g. I did not
1701 implement the Virtual Changer directive, but simply set
1702 the Changer Command to an empty string.
1704 kes Implement a BSOCK send() method that writes the whole record
1705 in a single write() request rather than in two.
1706 ebl add update volume=xxx recyclepool=yyyy
1707 volume takes recyclepool from pool when using update volume=xxx from pool
1709 kes Fix encryption deblocking bug, which caused some restored files
1710 to be truncated. This fixes bug #763.
1711 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1712 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1714 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1715 ebl Use btime_t instead of uint64_t in media patch.
1717 kes Optimize the use of the database a bit in the Status dir command.
1718 Only open it when needed, ensure that if any previous database
1719 was opened, it is closed.
1721 kes Correct VolCatBytes bug from media patch.
1722 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1723 in the case of orphaned records.
1724 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1725 and File records in 300K chunks to be more efficient. This
1726 idea came from Juan Luis Frances (if I remember right).
1727 kes Apply Eric's scratch patch that moves a purged Volume to
1728 the RecyclePool. Question: how is RecyclePool set? what
1729 happens to the ScratchPool?
1730 kes Apply Eric's media patch that collects read/write media
1731 times as well as byte counts. This patch requires a
1732 simultaneous upgrade of the DIR and SD. Note, there
1733 should be some way to turn off timing. I'm not sure
1734 times are in Bacula units.
1735 kes Apply Eric's batch-insert patch.
1737 kes Update projects list.
1739 kes Implement Include/Exclude file lists in FD as dlists using
1740 the new dlistString class. This permits efficiently having
1741 large include/exclude lists and completes project Item 25.
1742 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1743 console is authorized to cancel the job. This fixes bug
1745 kes Modify SD so that the VolCatJobs medium record is updated
1746 at the beginning of a Job rather than the end. This
1747 fixes bug #775 where exceeding MaxVolJobs caused jobs
1749 kes Added a mutex around getting and setting Volume information
1750 so that multiple simultaneous jobs will single thread.
1752 Switch to using Subversion
1753 kes Remove src/pygtk-console/ from configure
1755 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1756 plus the entrypoints.
1757 kes Apply patch supplied that corrects debug print
1758 in canceling jobs for max run time. Supplied as
1759 part of bug #621, which was previously fixed.
1761 kes Test on job_canceled() and sd_msg_thread_done inside
1762 loop starting the message thread to avoid a race condition.
1764 kes Remove rl_catch_signal from console.c as it conflicted
1765 with the header definition. Fixes bug #765.
1766 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1768 kes Clarify some stored/acquire messages to indicate if the
1769 problem is with read or append.
1771 kes Fix memory leak with storage ids in cats/sql_get.c
1772 kes Terminate watchdog earlier to avoid reference to released
1773 memory -- reported by Jason Austin.
1774 kes Move closing the database from jobq.c to the director daemon
1775 termination routine. This fixes memory leaks for shadow jobs
1776 (i.e. migration jobs).
1777 kes Free up the unique jobid chain items in migrate.c. This fixes
1778 a memory leak problem.
1779 kes Convert some ugly looking for statements to use foreach_alist
1780 in findlib/find.c. This will facilitate converting the structures
1781 to use dlist (for large include/exclude lists).
1782 kes Fix a bug in the btree.c and btree.h routines, then rename them
1783 rblist and add them to be built in src/lib. Include some new
1784 methods written by Rudolf Cejka that make the code more readable
1785 (hides some of the ugly casting).
1786 kes Add set_next() and set_prev() methods which make the code much more
1787 readable. Also add a new dlistString class that facilitates storing
1788 strings in dlists. To be used in the large include/exclude lists.
1789 kes Make some trivial modifications to lib/tree.h that use rblist
1790 rather than dlist for storing the tree links. This was suggested
1791 by Rudolf Cejka. The result of this is that the restore tree now
1792 uses red-black binary trees rather than simple linked lists. This
1793 should give rather dramatic speed improvements for directories
1794 contining large numbers of directories/files (more than 10000).
1796 kes Fix maxruntime bug #621.
1798 ebl Implement the include JobID in spool file name project.
1799 kes Reorder projects file in order determined by Jan 2007 vote.
1800 kes Implement item #12 on project list -- quick release of FD by
1802 kes Fix open of SQLite3 db where user does not have write permission
1803 so that DIR does not crash. Fixes bug #761.
1805 kes Add back missing @ in Win32 Makefile.
1806 kes Change 'Device not configured to autolabel' from INFO
1808 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1809 which should restart an indefinite # of times.
1810 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1811 other DIR specifications.
1813 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1814 Fix path quoting in SQLite scripts.
1815 Fix problems with SHGetFolderPath.
1817 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1819 kes Fix Job restart on error bug that promotes an Inc to a Full
1820 backup. This should fix bug #755.
1821 kes Add qt-console and first cut of code.
1825 kes Fix Bacula->Documentation link on Win32 to point to index.html
1826 instead of bacula.html. Fixed bug #750.
1827 kes Return JobId in db_get_job_record() when JobId==0. This should
1829 kes Do not release source pointers when restarting a failed job.
1831 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1832 This *should* fix bug #747.
1833 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1836 kes Modify USTORE constructor to set an empty store_source string,
1837 and don't copy the store_source string in a cancel. Hopefully
1838 this will fix Arno's seg fault, bug #744.
1839 kes Add back code to disable conio in configure. Fixes bug #743.
1840 kes Correct the Options scanner in the FD to correctly handle
1841 SHA1 option, which was eating the next option. Reported by
1843 kes Add code to indicate when the SD is spooling, spool wait, and
1844 despooling as requested by Alan Brown.
1846 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob