1 Technical notes on version 2.3
5 kes First cut at Duplicate Job implementation.
7 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
8 kes Start PluginOptions string, and refactor a bit of ua_run.c
9 ebl Apply Allan patch that permit to reset recyclepool.
11 kes Test patch -- possible fix or improvement for bug #1053
12 kes Refactor FD and SD status commands to permit new API code in
13 SD, and to fix Win32 build.
14 kes Win32 build is now working.
16 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
17 some ideas in patch from Scott Bailey.
18 kes Begin implementation of duplicate Job control.
19 kes Fix some of Win32 build after recent additions.
20 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
21 which causes the FD to detect whether or not the OS has the
22 honor no dump bit (*BSD systems), and if so, to skip backing up
23 any file with this bit set. The feature is enabled by setting
24 'honor no dump flag = yes' in the Options section of a FileSet.
26 kes Correct po warning message with datarootdir
27 kes Implement more code in dird.c to put configuration parsing in
28 a class rather than use globals.
29 kes Restructure SD status command for implementation of bat API
32 kes Suppress incorrect 'Will not descend from x into y' messages.
33 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
34 daemon globals used by parser.
35 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
37 kes Fix free of plugin_list when none exists.
39 ebl Apply accurate project patch.
41 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
42 on non-mempool object)
43 kes First cut of converting FD .status to work with bat API.
45 .status client=XXX header
46 .status client=XXX running
47 .status client=XXX terminated
48 kes Implement first cut of Copy Job.
49 kes Implement Catalog in Pool resource. It overrides catalog specified
50 in the Client resource.
52 kes Apply patch (with some difficulties) from Joao Henrique Freitas
53 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
55 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
56 ftruncate() actually works. In the case of some (cheap) NAS devices,
57 it does not, and so recycling NAS Volumes does not work. The code
58 simply unlink()s the file, then recreates it. This fixes bug #1011.
60 kes First incomplete cut of big malloc blocks for htable.
61 kes Tweak plugin code.
63 kes Plugin debug code + tweak a couple bat dialog layouts
65 kes Fix creating first JobMedia record during Migration to include
66 proper index. This caused slow restores of migrated jobs.
67 kes Temp fix to plugin name file_index.
68 kes Bacula backed up and restored a MySQL database.
70 kes Implement plugin restore.
71 kes Implement parsing of db_driver to give db_type index.
73 kes First cut of plugin restore code.
74 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
75 and do not strip paths on symbolic links.
76 kes Set catalog backup database and user name from values specified on
78 ebl Fix #1031 about wrong pool source information in job report.
81 kes Remove a redundant jcr argument to find_files, match_files, and
83 kes Implement '.status dir header|scheduled|running|terminated' that
84 prints the requested status section. With the exception of the
85 header, the other reports have fields separated by tabs (\t).
87 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
88 a resource embedded run command to find a since time if no explicit
89 since time was supplied on the command line.
90 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
91 that updates the state file at job termination time in addition to
92 when the daemon terminates.
94 kes First version where a plugin did a backup.
95 bpipe-fd.so created a backup file, wrote a test
96 string to it, and Bacua could restore this fabricated file.
98 kes Implement DB Driver = string for the DBI driver.
99 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
100 kes First cut of code for loading Win32 plugin dlls. Implement
101 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
102 and implement a dlfcn.h file based on opengroup's definitions of
105 kes First cut plugin directives.
107 kes Apply patch from bug #1049 to prevent stripping the path on a
109 kes Attempt to fix bug #1047 where stripping a path corrupts the
110 heap. Waiting for feedback.
111 kes Correct the Mount message not to suggest labeling a new tape
112 when doing a restore. Submitted by email by John Stoffel.
113 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
114 FD by using casting. Reported in bug #1042.
116 kes A bit of crypto cleanup. More later.
118 Release Version 2.2.8
120 kes Apply patch from Martin to correct bug #1040, bscan sets existing
122 kes Fixed important spelling error in doc -- bug #1045.
124 ebl Fix bextract to be able to extract non-portable Win32 data to
126 kes Move initialization of read/write res lock earlier in the code.
127 This fixes the crash with a null conf file. This fixes bug
129 kes Redefine CURES in lib/parse_conf to be URES and move it all
130 into lib/parse_conf.c -- this responds to bug #1042, but does
131 not fix it. The fix is not to compile with FORTIFY_SOURCE.
132 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
133 the trunk SVN. I don't think this was reported as a bug.
135 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
137 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
139 kes Add DataDespooling and DataCommitting status (committing is
140 the last despooling).
141 kes Finish implementation of new reservations code noted below.
143 kes Fix bsnprintf for float point numbers. I broke recently when
144 parameterizing some variables. This fixes bug #1036.
145 kes Undo recent reservations changes ... will apply them later
146 when they work better.
148 ebl Fixes #1034 which cause mysql to hang the connection after 8h
149 ebl Change default statistics target of filename.name and path.path
150 fields for PostgreSQL. This speeds lookup by indexes. Thanks
152 kes A few more tweaks to new reservation code. Make sure to clear
153 vol released flag when retaking volume. When reading label and
154 label is bad mark volume unused. When recycling, mark volume
155 unused so it can be renamed.
157 kes Fix reserve_volume() so it doesn't release a volume in use
158 (i.e. a volume entry not marked released). This should be
159 the last part needed to fix bug #1018.
161 kes Move Heartbeat documentation from Job to Director resource.
162 This fixes bug #1033.
164 kes Fix existing switch drive SD code to call autochanger to release
165 any old volume. This must be done to keep the autochanger from
166 releasing subsequently newly reserved volumes in doing a close().
167 This should fix bug #1018.
168 kes Fail if attempting to get console input in batch mode. This
169 should help fail RunScript console commands that are incomplete.
170 kes First cut implementing switch_drive() in SD (not actually called).
172 kes Implement first cut running console commands in a RunScript.
174 ebl Fixes bug #1028 where 'Selection Type' option was not usable
176 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
179 Release Version 2.2.7
181 kes Add new free_tls() entry point so that Win32 builds.
182 kes Fix compile warning in src/lib/util.c
183 kes Fix entry point for edit_job_codes() so that Win32 builds.
184 kes Fix seg fault Frank Sweetser reports in regression testing
185 on his systems. The problem was that the original author of
186 bsnprintf.c did not take into account the side effects of
187 using ++x in the argument to a #define.
188 kes Make SD protocol backward compatible with version 2.2.x.
190 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
191 because Bacula no longer restores sockets.
192 ebl Always use ignorecase fileset option on win32 FD.
194 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
195 that implements double quoting include names in conf files,
196 and also allows piping input by having the first character
197 be a vertical bar (|).
198 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
199 that implement %f in RunScripts to pass the FileSet name.
200 kes Skip leading | when lex input comes from a pipe as suggested
201 by Michael Stapelberg <michael@stapelberg.de>.
203 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
204 Nerijus Baliunas <nerijus@users.sourceforge.net>
206 kes Implement Plugin Directory and plugin events.
208 kes Implement a security enhancement: TLS authentication but no
209 encryption. Enabled by setting 'TLS Authentication = yes'.
210 Note when this is on, TLS encryption is turned OFF!
212 kes This patch corrects a problem where the maximum concurrent storage
213 jobs counter gets out of sync during restore jobs causing jobs to
214 'wait on max Storage jobs'. This patch fixes bug #1009.
216 kes This patch fixes bcopy so that it produces correct Volumes.
218 kes This patch eliminates spurious output to the console during a VerifyVolume
219 job that contains encrypted data. It fixes bug #1024.
221 kes This patch prevents the 'status dir' command from trying to use a scratch
222 volume and possibly moving it from one pool to another. This patch fixes
225 kes Add new include to postgresql.c suggested by Marc Cousins so
226 that it compiles correctly with pgre version 8.3.
228 kes Fix --archivedir addition to configure. Replace it with
229 --with-archivedir in configure.in This fixes the regression
231 kes This patch fixes bug #1012 where the job is canceled because
232 of Max Run Time exceeded when the job has not yet started.
234 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
235 one 'part' to write. Instead of each part being stored on disk,
236 written to DVD, then deleted from disk, all parts are written to disk,
237 and only the last is written and deleted from disk.
238 kes This patch fixes the status command to include the formating string for
239 JS_AttrInsterting. It fixes bug #1021.
240 kes This patch should fix the Mac OS X build problem on the latest
241 Darwin, where sys/types.h was not included correctly (apparently
242 due to a change in the Mac headers). The solution was to explicitly
243 ensure that it is defined for the ./configure.
244 This patch also has a rebuild of configure that includes the Debian
245 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
246 kes This patch should ensure that queued messages to the console are
247 displayed as soon as possible. It should fix bug 1007, but has been
248 reported not to work.
250 kes This patch fixes the infinite loop when trying to increase the
251 maximum number of volumes in a Pool during the add command.
252 This patch fixes bug #1008.
254 Release Version 2.2.6
256 db Remove extra data on estimate command in joblist for bat.
258 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
259 really change anything, but is the beginning of doing it *right*.
260 To do it completely right the LastWritten date must be passed to
261 the SD, but it is not yet done.
262 kes Minor tweaks to some bat restore SQL.
263 kes This patch fixes bug #1003 where putting the message output from
264 a Verify job into the catalog results in a recursive loop. The problem
265 seems to show up only with postgresql (to be verified).
266 kes Correct %x to %p in postgresql debug statement.
268 kes Fix bug #942 where lots of emails where generated when the heartbeat
269 interval was low and Bacula wanted a different tape from the one in
272 ebl Add new SD despooling attributes and Dir inserting attributes
273 job status codes in the catalog (Status table).
275 ebl Use qmake-qt4 instead of qmake when available (debian system).
277 kes Add a security warning to src/cats/make_catalog_backup.in indicating
278 that passing the password via the command line (arg 3) is insecure.
279 This responds to bug #990 (it doesn't fix it).
281 kes Set default debug_level to zero. This corrects bugs #991 and #993.
282 kes Fix a crash in bat when it cannot connect to the Director for example
283 if the Director is not running.
284 kes Remove redundant INDEX (JobId) from File table in the trunk.
286 kes Make explicit exception to GPL in LICENSE to permit linking
287 the Win32 FD with Microsoft VSS code.
288 kes Apply the Solaris package patch from
289 Masopust, Christian <christian.masopust@siemens.com>
290 kes Apply the patch to optionally add a timestamp in the debug output
291 submitted by Mariusz Czulada <manieq@wp.eu>.
293 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
294 backend (sql_strerror). Fixes bug #989
296 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
297 It applied with no problems.
298 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
300 kes Redirect stderror to stdin on mt status command in mtx-changer.in
301 since the status is returned on stderr on Solaris.
302 kes Activate Close button on tray-monitor window. This fixes
304 kes Check for NULL item in parse_conf.c before calling it. In the
305 case of Device, there is no item and this caused a seg fault when
306 Device appears in the conf file.
307 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
308 avoids pulling in config.h multiple times in some new code.
310 kes Fix spurious warning message printed when creating a volume with
311 a LabelFormat. This fixes bug #976.
313 Release Version 2.2.5
315 kes Add JobId in place of Job name in all the Jmsg() output.
316 kes Correct the APP_DESC for the Win32 storage service (remove an e).
318 kes Make maxvol-test and new more strict maxvol2-test work.
319 kes Print JobId in all Jmsg() job output.
321 kes Add new SD despooling attributes and Dir inserting attributes
322 job status codes. This fixes bug 961.
323 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
325 kes Fix doc issue. This fixes bug #963.
326 kes Fix listing performance problems in bat. Pointed out by
328 kes Remove old debug code.
329 kes Fix bat code that tests for Win32. This should fix bug #968
330 kes Query 5 list wrong Vol after migration. This fixes bug #960
332 ebl Fix #969 where user can't change Replace option in restore menu.
334 kes Save jcr in thread specific data (tsd) for each thread.
335 kes Make Dmsg() print JobId as -%u.
336 kes Make Jmsg, Emsg, and others automatically pickup the jobid
337 for the thread if it exists.
338 kes Remove old reservation debug jid code.
339 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
340 ebl Add an option that permit to specify spool size in job
341 definition. (Applying patches/testing/spoolsize_per_job.patch).
342 You must upgrade SD and DIR at the same time.
343 dvl Add new configuration item --archivedir
344 dvl Adjust regression tests to use tmp not /tmp. This will allow
345 multiple concurrent runs of the regression tests.
347 kes Fix race condition that drops final block written to volume.
348 This happens in rare cases with multiple simultaneous jobs
349 when the Volume fills. This fixes bug #964. May be related
350 to bug #935 and possibly #903.
351 kes Eliminate more strerror() and replace with bstrerror().
352 kes Remove BSD getopt and replace with unrestricted IBM version.
353 kes Fix Win32 build for changed calling sequences.
354 kes More tweaks to the mount volume routines to get everything
355 right. Changed variable name from find to have_vol, which is
356 much easier to understand.
357 kes Enhance btimer debug code.
359 kes Fix FD->SD authorization failure, which was due to spurious
360 wakeups from a pthread_cond_timedwait(). Simply check the
361 predicate before continuing. This fixes bug #953.
362 kes Add const char where needed (more to do). Remove temp debug code.
364 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
365 kes Don't overwrite error message in check_tables_version.
367 kes Unlock batch insert tables with same calls used elsewhere.
368 kes Allow starting 59 jobs a second.
369 kes Make SD session key more random.
370 kes Add retry for SQLite opening db if it fails. Probably helps
372 kes Suppress extra error messages during batch insert failure.
374 kes Add jcr to timer packets so if killed message can be sent to job.
375 kes Add JobId to all Dmsg() output.
376 kes Put some FD auth code on dbglvl rather than fixed.
377 kes Return insert attributes error message in db msg buffer to avoid
378 false error messages. Helps fix bug #966.
379 kes Separate batch init error messages. Probably helps fix bug #966.
380 kes Make SD code that contructs attribute insert check string lengths
382 kes If Dir gets an error during inserting attributes, cancel SD.
383 This reduces unnecessary error messages.
385 kes Correct search boolean for getting Volume info
386 ebl Cleanup batch insert code. Probably fixes bug #965.
387 kes Back out one small change to the reservation system (reserving a volume).
388 kes Rework how a Volume is mounted. It is now much more intelligent and
389 will always attempt to use any mounted volume if possible and reduces
390 calls to the Director asking about volumes.
392 kes Turn off some code when batch insert not enabled.
393 kes Edit FD name in connect error messages.
394 kes Rework the reservation system to take into account that the Director
395 might give us a Volume that is different from the current one being
396 used, and to ensure that we don't exceed Maximum Volume Jobs.
397 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
398 fatal error with multiple jobs running'
399 kes Add more debug code in reservation system.
400 kes Implement maxvol-test to check bug #947.
402 kes Add code to handle tray monitor separated from Win32 FD.
403 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
405 kes Add missed return in fixing verify bug -- trunk only.
406 ebl Fix a command parser issue causing a director segfault.
407 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
409 kes Increase the max block size to 4MB fixes bug #957.
410 kes ERABT if user sets min block size > max block size. Fixes bug #956.
411 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
412 is not properly mounted (recognized) during a poll.
413 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
414 Job that has differences reports Verify OK.
415 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
417 ebl Add an option to operate on all pools with update vol parameters.
418 This complete the project 20. Patch from Nigel Stepp.
419 ebl Add history support to bconsole when using readline.
420 Using Ctrl-D to exit doesn't update .bconsole_history
421 kes Modify new volume algorithm to use max MediaId for generating next
422 volume number rather than the count of Volumes. This should essentially
423 eliminate the failure rate if some volumes were deleted. Bug #921.
424 kes Begin implemention of Optimize Job Scheduling.
425 kes Implement restore callback that Dirk and I agreed on for bat
426 restore. This fixes bug #928. Restore of backup of zero files fails.
427 kes Fix SQL Catalog logging which broke with new db_escape_string
430 Release Version 2.2.4
432 kes Fix bacula_cats.def for new db_escape_string().
433 kes Increase size of name string when FD making connection to SD.
434 May fix bug #953. FD->SD connection failure.
436 kes Add code to help Dan debug 2drive-incremental-2disk test.
437 kes Add code to try to fix bug #908.
438 kes Add waits to multiple exit detection code to try to force pid
439 file to always be deleted.
440 kes Restore good dev.tar.gz to rescue set appropriate binary property.
442 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
443 trying to switch drives by checking for blocking before unblocking.
445 kes Cancel storage daemon in all cases where FD reports error. This
446 should fix virtually all cases of bug #920.
447 kes Fix db_escape_string() for MySQL which did not compile.
449 kes Fix error message that was clobbered when Dir tells SD it does not
450 have write permission on Volume. This should fix a minor point
451 in bug #942, but not the main problem.
452 kes Add code to cancel job in SD if FD connection fails. This should
454 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
455 dvl Pass jcr and db into db_escape_string() to enable better escaping
457 kes Fix migration code to get correct Volume name with multiple volumes
458 by skipping |. Fixes bug #936.
459 kes Implement patch supplied by Landon to fix bug #944 where using
460 TLS with bconsole uses 99+% of the CPU.
461 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
463 kes Move patches into patches directory.
465 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
468 ebl Using 'm' in bconsole will show messages like before,
469 and not memory usage.
470 kes Fix bug #935, and probably also bug #903 where files were not
471 restored. MediaId was not properly set in JobMedia record after
474 kes Suppress chown and chmod error messages if the FD is not running
477 kes Apply Martin Simmons' patch that should turn off the new API usage
478 when batch insert is turned off allowing building on older
480 kes Add ./configure search in qwt-qt4 for qwt package
482 kes Bacula is now free of 3rd party GPL copyrighted code!
484 kes Add guid_to_name.c/h which replace idcache.
485 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
487 ebl Detect if new PosgreSQL batch insert API is present.
488 kes Correct incorrect mempool call causing Director crash. Occurs on
489 systems without va_copy().
490 sb Update spec files for 2.2.1 release
492 kes Fix memory pool call in ua_output.c. bug #934.
493 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
494 Add test program to fnmatch.c
496 kes Integrate patch to README.vc8 from
497 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
498 edit it to get it into Unix patch format.
499 kes Implement mkpath.c to replace old FSF makepath.c
501 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
503 Release Version 2.2.1
505 kes Update POTFILES.in
506 kes Cleanup a few underquoted AC_DEFUNs in configure
507 kes Apply patch from Martin Simmons that adds a test for va_copy to
510 kes Fix bug #921 by increasing the number of tries to create a new volume
512 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
513 can be called multiple times. Implement a version for machines
514 without va_copy() that gets a big buffer.
516 kes Integrate more portable zone offset code into bsmtp.c
517 Submitted by Attila Fülöp.
519 kes Fix bad SD->FD return status reported by
520 (James Harper) <james.harper@bendigoit.com.au>
521 ebl Fix a bug in read_close_session which return random status
522 thanks to James Harper
524 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
525 and directory names during restore of single file/directories.
526 kes Add sanity checks to .sql command when string is empty. Hopefully
527 that will resolve Dirks Director crash.
529 kes Apply patch submitted by Martin Simmons that corrects a seg fault
530 in the bsmtp chat subroutine when debug is >= 10.
532 kes Fix Director crash when running bat SQL queries.
533 kes Add David's notes on Item 8: Copy pools.
535 kes Rework projects file to be current and ready for a vote.
536 kes Enhance lex scanner error message.
538 kes Tweak LICENSE file to mention BSD code.
539 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
540 if specified on the ./configure.
541 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
542 This class is intended to allow us to open a second bsock to the
543 Director while in the restore subdialog.
545 kes Fix configure to create bat Makefile before creating dependencies.
546 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
547 kes Add a tooltip to the tray monitor.
548 dvl Set the Director's PID file before dropping privs. This fixes
551 kes Update AUTHORs file
552 kes Increase the default max concurrent jobs to 20 in FD and SD to
553 correspond with the default .conf files.
554 kes Rewrite the Win32 service routines. This eliminates the 3 copies
555 some different, of the same file created by RN when porting the
557 kes Rearrange some of the Win32 directories and the placement of the files
559 kes Set DEVELOPER flag in version.h
561 ========================================================================
562 Release Version 2.2.0
564 kes Apply a second doc patch from Marc.
565 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
566 improves the tips section that discusses how to setup multiple
569 kes Update bat README file.
570 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
571 corrects a typo in the Recycle status check in db_find_next_volume().
572 This will probably fix a number of annoying problems with multiple
574 kes Modify most of dird/msgchan.c to use bsock class calls rather than
575 bnet calls -- no functionality change.
577 kes Modify the Verify output to specify if files are missing on
578 the Volume(s) or disk. Fixes confusion in bug #916.
579 kes When more than one Volume is read in a migration job, the last
580 Volume bytes reported are from the last read volume rather than
581 the last written volume. Fixed. This fixes bug #910.
582 kes Fix display of Recycle flag after update volume=foo recycle=yes.
583 It previously printed New Recyle flag is: no. This fixes bug
586 kes Correct seg fault when switching tape drives during restore.
587 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
588 be used until after 2.2.0 release.
590 kes Remove fnmatch() in SD that permitted wild card specifications.
593 kes Fix %g in filename returned by SQL for browse tree reported by
595 kes Fix configure so that it puts config.out in the cwd rather than
597 kes Attempt to fix the locking problem reported by Eric in bug #906.
598 kes Make berrno class to leave errno unchanged after constructor call.
599 kes Make bnet_server use the heap rather than the stack to allocate
600 its socket fd pointers to avoid a crash at termination. Problem
601 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
603 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
604 and putting it in depkgs-qt along with Qt4.3.
606 kes Rework code in acquire.c that switches drives for reading when
607 the Media Type does not match. This should fix bug #906
609 ebl Fix a director segfault during job setup #907
610 kes Correct seg fault in postgresql when first operation returns no
611 rows. Fixes Dirks File browser problem seg fault with bat.
613 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
614 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
617 kes Implement PopUp YES/NO dialog for bat.
619 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
621 kes Correct RunScript to terminate job in FD on failure.
622 kes Change abort_on_error and AbortJobOnError to fail_on_error
623 and FailJobOnError in RunScripts.
624 kes Minor tweaks of code formating in RunScripts, principally to
625 avoid depassing 80 columns.
627 kes Eliminate one #ifdef Win32 in bsmtp
628 kes Implement grow tool to grow a file for testing very large databases.
629 kes Add big-vol-test to test Bacula seeking with > 5GB.
632 kes Modify find_next_volume() to return all values in Media record.
633 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
637 kes Update Release notes
639 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
640 Warning, in previous beta version, all media get from scratch keep their
643 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
644 This should fix bug #842. Made a note to look at removing the temp
645 files at the end of the install.
646 kes Add ability to mount and unmount a file device providing it is
647 marked as being removable and has the appropriate mount and unmount
648 commands defined in the Device resource. This fixes bug #830.
649 kes When applying a storage override, release all previous storage
650 definitions rather than just prepending the new storage.
651 This should prevent a good deal of confusion.
653 kes Implement ./configure search for qwt libraries.
655 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
656 Win32 FD. This should fix bug #893.
657 kes Remove an unnecessary beep in Win32 init code.
658 kes Update copyright dates in Win32 executable about boxes.
659 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
660 code with a BSD getopt.c and getopt.h.
661 kes Remove sched.h from the Win32 compat directory -- not used.
662 kes Remove the Exit menu item from the Win32 tray monitor. If you really
663 need to shut it down, do it through the services panel or the command
665 kes Remove some inappropriate Bacula FSFE copyrights.
666 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
667 kes Fix regress config non-portable test as pointed out by
668 Florian Heigl <florian.heigl@gmail.com>
669 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
670 as pointed out by Florian Heigl <florian.heigl@gmail.com>
672 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
673 Reported by Frank Sweetser.
677 kes Fix client-only build.
678 kes Integrate client-only fixes for bsys (initgroups) and conio from
679 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
680 kes Make arguments to get_scratch_volume() in same order as other
682 kes Rework the prune_volumes() subroutine so that after purging and
683 no volume found in desired pool, it will check for a scratch
684 volume. This prevents recycling the whole scratch pool.
685 kes Add code to status storage to print boffset_t (largefile support).
687 kes Move qwt (Graphics libarary for Qt4) to depkgs.
688 kes You now need a --with-qwt=<dir> to be able to build bat.
689 kes Update src/win32/cats/bacula_cats.def to include the new
690 db_get_query_dbids() call on Win32.
692 kes Correct a problem when selecting a scratch volume and moving
693 it to another pool that lost some columns.
694 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
695 kes Enhance Autochanger error messages to include Volume and device name.
696 kes Rework prune_volumes() code to take account of InChanger flag,
697 and to handle recycling volumes going to the Scratch pool and
698 current pool because the RecyclePool directive.
699 kes Implement a better and more efficient db_get_query_dbids() to
700 handle creating and passing back a list of DBIds.
704 kes Start work on new more efficient DBId subroutine. First use
705 will be for recycling volume to Scratch inchanger.
706 kes Increase number of JobIds in pruning from 1000 to 10000.
707 This to be replaced by above routine.
708 kes Begin implementation of building Qt4 on Win32.
709 kes Correct typo in fix I added for bad TLS shutdown.
710 kes Pull 2.0.3 patches into patches directory.
711 kes Update Release notes. Include qt-console in line count.
712 kes Update Projects file.
714 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
715 bug in migration code where a job that spanned two volumes
718 kes Implement new BST_DESPOOLING blocked state. Change from locking
719 during despooling in SD to blocking. This means that other threads
720 can work with the device structure, in particular the reservations
721 system while despooling.
723 kes Fix return in reservation message queue that missed clearing
724 the jcr lock (implemented 26Jun07 below).
725 kes Rename a number of dev methods to make locking function names
727 kes Document locking in lock.c. Move lock structures to new file
730 kes Move reservations message lock to lock jcr only this
732 kes Move main SD locking code into lock.c (new file).
733 kes Update Win32 build to include lock.c
737 kes Dirk committed the qwt library code for drawing graphs in bat.
738 kes Tweak install of qwt so that it is integrated with ./configure.
740 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
741 out by Eric (my typo).
742 ebl Fix configure.in to get batch mode enable
743 kes Return correct string from authenticate.cpp in bat when connecting
745 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
746 spurious line drops when using TLS.
747 kes Do not file reparse points when restoring a file that already
750 kes Implement Windows reparse points -- similar to directories, but
751 we do not descend into it. This is a first cut. They seem to
752 be backed up, but restore is not yet tested.
753 kes Remove restore_blocking in tls code when shutting a socket to leave
754 it in blocking mode. Hopefully this will fix the encryption bug
755 reported by Frank Sweetser.
756 kes When opening a file for backup, tell the OS that we are going to
757 read it sequentially -- optimization.
758 kes Change variable names in authenticate_director() to not conflict
759 with member names in bat. Caused great confusion with compiler,
762 kes Queue openssl error messages in case of comm problem.
763 kes Do shutdown() call if socket terminated.
764 kes Remove some duplicated code in tls.c
765 kes Move more of the bsock member variables into private and access
767 kes Add Frank Sweetser's tls-test to the regression suite.
769 kes Add Swedish sv.po file
771 kes Don't print clock skew message in FD if less than 3 seconds diff.
772 kes Add a bit of VSS info to status client.
773 kes Implement a first cut of Vista VSS, using Win2003 code.
777 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
778 loaded tape but uses first drive).
779 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
780 This was indeed a Win32 issue.
782 kes Simplify search of autochanger for in-use Volume.
783 kes Fix exit condition of check for in-use volume. kes Remove
784 inappropriate my_postgresql_free_result() in db_close()
786 kes Fix bad return in FD when encryption signature not found.
787 Probably caused a crash.
788 kes Inhibit missing encryption signature error messages for
789 file types where no signature computed.
790 kes Correct inverted check on autochanger in reservation system.
791 kes Tweak debug code in autochanger reservation.
793 kes Add some additional locking in the cats directory in subroutines
794 that modify packet variables called from batch insert.
795 kes Rework how dcrs are allocated. new_dcr() can now be called
796 with an existing pointer, and it will simply clean it up.
797 This allows the reservation system to test various different
798 devices, and will permit easy device changes.
799 kes A bunch of changes all over to handle new new_dcr() calling
801 kes Work more on the Volume management in the SD. Remember Volumes
802 for tape drives and for autochangers (even virtual disk changers).
803 kes When looking at the Volume list to reserve a drive, handle
804 autochanger names correctly by interating through the changer
805 devices. Also call the Director to see if a Volume is suitable
807 kes Fix some bugs in bscan. Make sure all media records are written.
808 Make sure that valid JobMedia records are written for disk files.
809 Previously they were completely wrong.
810 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
811 that the URLs don't change and so that the developers will all
812 work off the same copy. Rebuild from scrach.
813 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
817 kes Fix seg fault in FD from incorrect digest size.
818 kes Fix argument to non-OpenSSL crypto.c subroutine.
822 kes Remove a few malloc()s from the encryption code.
823 kes Use the class calls to bsock in filed/backup.c and restore.c in
824 place of the old bnet_xxx code.
825 kes Implement code that does an on the fly calculation of the
826 signing digest during restore of encrypted files. It makes
827 a best guess at the algorithm, and if it is not correct, will
828 then revert to the old code which reads the file after it is
830 kes Implement at least one missing crypto stream in stream_to_ascii()
831 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
832 #877 where a reload with bad syntax causes Dir to exit.
834 Cut: 2.1.14 beta (not released)
836 kes Do not free a volume on a tape drive until another volume is
837 mounted and read, or the autochanger unloads the volume.
838 This should help the SD re-use volumes that are already mounted,
839 and should fix bug #886.
840 kes Apply patch from user brettedgar that allows gnome2-console include
841 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
842 kes Apply patch from Lucien Weller that fixes day of week calculation
843 because of DST flag problem. Fixes bug #887.
845 kes Move find_next_appendable_volume() to after acquiring a valid device
846 in reserve.c. This fixes bug #864 -- confirmed by reporter.
848 kes Unable to reproduce bug 872. However added additional testing for
850 kes Bug #874 resolved by documenting SQLite limitations.
851 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
852 kes Bug #881 resolved by removing typo in mtx-changer script.
853 kes Made Frank Sweetser's wiki the official Bacula wiki with his
854 approval. Added a link to the wiki on the web page, and implemented
855 a backup from http://paramount.ind.wpi.edu
857 kes Fix update allfrompool to pass pool name.
859 kes Convert to pure GPL v2 license.
860 kes Fix sscanf problems reported by Peter Buschman that caused
861 a bus error on Solaris.
862 kes Rework (simplify) the select prompt in bat.
863 kes Move get_jobid_from_tid() into lib and create a
865 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
866 should definitely fix the problem of lost error messages in the
868 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
869 kes Eliminate tcpd.h from the project. Enclose the #include from the
870 library with extern C ...
871 kes Add print of signal name when a signal is trapped.
875 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
877 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
878 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
879 makes SQLit3 run 30 times faster, though a bit less safe.
880 kes Implement --with-batch-insert in configure and detection of thread
881 safe libraries. It is on by default, but turned off if no thread
882 safe library (e.g. SQLite 2) is available.
884 kes Fix Bacula PostgreSQL buffer overruns.
885 kes Do better checking for NULL results returned from PostgreSQL;
886 implement retry for failed queries; clear results buffer after
887 failed query. Hopefully this will correct the PostgreSQL failures.
889 kes Implement algorithm to handle only one appendable volume with
890 Prefer Mounted Volumes = no.
891 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
892 returned from a query.
893 kes Make volume lock recursive.
894 kes Implement an additional volume reservation algorithm that
895 starts by considering all reserved volumes then uses the
896 old brute force algorithm of searching the resources to
897 find a suitable device.
898 kes Add new reservations debug code and refine the old code.
899 kes Update the win32/dll/bacula.defs file.
901 kes Tweak reservations algorithm to permit a few more cases, i.e.
902 volume reserved, but on different drive, ...
903 kes Enhance SD status to include Pool and Media Type for drive in a
904 more readable format (a bit longer).
905 kes Fix PostgreSQL double free.
907 kes Minor refactoring of restore decryption code.
908 kes Add code to smartall.c to detect double free of a buffer.
910 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
911 so that bsmtp will create a correct email address (mailbox only).
912 kes Modify 'memory' command so that the buffers are listed as 'In use'
913 to avoid confusion with Orphaned buffers.
914 kes I reworked the OpenSSL include/lib flags to be handled in
915 the standard Bacula way, which should fix bug #863 concerning
916 non-standard OpenSSL libraries.
918 kes Implement Help Browser window for bat.
919 kes Fix reload bug that reset StorageId to zero.
921 kes Fix TLS #ifdefing when TLS turned off.
922 kes Ensure that when labelling a tape with Slot=0 that InChanger
924 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
926 kes Add StartTime to final uar_sel_jobid_temp query so that we can
927 add DISTINCT (required by PostgreSQL).
928 kes Implement BSOCK authenticate_director() method. Eventually will
929 authenicate all daemons.
930 kes Move several more functions into the BSOCK class.
932 kes Add code to tell the OS that we no longer need a cached
933 file that we were reading. In findlib/bfile.c. Also,
934 only cache files that we are reading. Thanks to
935 Tobias Oetiker <tobi@oetiker.ch> for the idea.
936 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
937 kes Implement script to automatically generate cats and dll .def
939 kes Update README.mingw32 to include new .def file generation.
940 kes Correct typo in UTF-8 error message as reported by:
941 jhernandez <julianhernandez@gmail.com>
942 kes Add additional sm_check() code on debug level 1.
943 kes Set default debug level to 1.
944 kes Trap SIGABRT in attempt to get traceback.
946 kes Reduce bat connect timeout from 30 to 15 seconds.
947 kes More restructuring and implementing BSOCK class in place of
949 kes Remove a few unnecessary malloc() tests in crypto code.
950 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
951 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
952 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
954 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
956 kes Fix Verify InitCatalog. The attributes were not pointing to the
957 correct saved location.
958 kes Implement message callback so that GUI is sure to get all
959 daemon messages. Currently displayed in a dialog in bat.
960 kes Ignore SIGUSR2 (Bacula timer) in bat.
961 kes Apply regress patch from bug #859 to allow regress to work
962 with Solaris compiler.
964 kes Begin adding TLS support to bat.
965 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
966 clean up lex.c and make it more readable.
968 kes Move more bnet functions into the BSOCK class.
969 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
970 kes Complete change of berrno strerror() method to bstrerror()
974 kes Cleanup incorrect email addresses in bsmtp.
975 kes Make bat display initial messages rather than discard them.
977 kes First cut of adding .mod to the run command.
978 kes Implement auto display of messages in bat.
979 kes Enhanced preferences to allow all Bacula output to be
982 kes Try to make bsmtp date routines more generic.
983 kes Fixed bug #856 autochanger documentation.
984 kes Rework bsmtp date editing for Win32. This fixes bug #854.
985 kes Add new cats entry point so Win32 builds.
987 kes Attempt to fix bsmtp date editing on OSes without %z editing.
989 kes Do better checking for the MySQL 64 bit libraries looking for both
990 .a and .so libraries.
991 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
992 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
993 kes Require the thread safe version of MySQL during configure. Thanks
994 to Andre Noll for pointing this out.
995 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
996 continuing in migration code.
997 kes Apply implementation of tray-monitor font derived from gnome-console
998 submitted by Andreas Piesk <a.piesk@gmx.net>
1000 kes Eliminate important memory loss in SQLite
1001 kes Fixed the batch insert MySQL thread specific data that was not
1002 being freed. See cats/mysql.c:db_thread_cleanup().
1003 kes Fix restore before command.
1004 kes Convert old hdr.name to name() in a few places.
1005 kes Implement update jobid command.
1006 kes Return all time_t dates in db_get_job_record()
1007 kes Stop watchdog in SD earlier.
1008 kes Put Pool just after Storage in please mount message.
1009 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1012 kes Update the po files.
1013 kes Fix Verify InitCatalog by making it cache attributes.
1015 kes Change name bacula-bat to bat for man 1 page to correspond to
1017 kes Check for client and store NULL pointers in status command. This
1019 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1020 kes Fix sign extended editing of %p.
1021 kes Clean out a little old #ifdefing in cats/mysql.c
1023 kes If time diff between DIR and FD is more than 600 seconds convert
1024 INFO message to WARNING.
1025 kes Implement heap size display in status for all daemons.
1026 kes Attempt to fix MySQL db open memory loss (not successfull).
1027 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1028 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1029 Query. This looks like a MySQL but but by doing extra releases,
1030 the memory goes away. This should fix bug #847.
1032 kes When backup fails, cancel SD before waiting for sd termination.
1033 kes If SD is waiting for FD to connect during cancel, wake up the
1035 kes Fix fsf code so that errno is correctly reported.
1036 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1038 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1039 so that Bacula doesn't later stumble into a seg fault.
1040 kes Use the term Restore Client in the restore Job report.
1041 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1042 the original job's FileSetId.
1043 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1044 spooling in migration jobs. Not yet tested.
1045 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1046 reading conf file from a pipe. However, do it with open_bpipe()
1047 rather than popen. Not yet tested.
1049 kes Fix an ugly bug where the VolCatBytes were getting updated
1051 kes Implement bconsole memory command that prints current memory
1052 usage, plus smartalloc dump.
1053 kes Clarify some error messages in backup, admin, and migrate.
1054 kes Shrink label dialog to smaller size.
1055 kes Invert Cancel OK buttons on restore to be OK Cancel.
1056 kes More strerror() to bstrerror() conversions.
1058 kes Start implementing bstrerror() in place of strerror().
1059 kes Stripping path -- seems to work.
1061 kes Prevent door and port files from being restored (mostly
1063 kes Free an unreleased buffer in compat code.
1064 kes Change console Job name from *Console* to -Console- to eliminate
1065 Win32 filename problems. Put Win32 path separator when creating
1066 Console file. This fixes bug #846.
1067 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1069 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1071 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1072 to force Win32 error message.
1074 kes First cut strip path. The data should be passed to the FD,
1075 but nothing is done with it yet.
1076 kes Enhance the digest and signature routines in the crypto
1077 library to accept a JCR and to use it to print error messages
1078 so that they will go in the Job report rather than the daemon's
1080 kes Simplify some of the verify signature code.
1081 kes Simplify a few of the alternative returns in the signature
1084 ebl Use only POSIX regex instead of GNU regex in breg.c for
1085 File relocation. It fix broken freebsd compilation.
1086 kes Convert all other Dir files to use new ua class message
1088 kes Tentative fix for missing digest signature in bug 807.
1089 kes Correct handle problem in new win32_ftruncate routine.
1090 kes Convert ua_purge.c and ua_update.c to use new ua class
1091 message routines for bat.
1093 kes Correct incorrect installation of LICENSE in Win32 installer.
1094 kes Display LICENSE at the beginning of the Win32 install.
1095 kes Attempt to correct the need for the png files to be installed
1097 kes Reapply my bat.conf install script in qt-console. I think I
1098 editted bat.pro instead of bat.pro.in and it was lost.
1099 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1100 the /var/lock/subsys for subsysdir. Also corrects typos in the
1103 kes First cut update job.
1104 kes Correct configure to include qmake of src/qt-console directory.
1106 kes Make restore job yes/mod/no print in one command so GUI works.
1107 kes First cut implementing backup and restore client.
1108 kes Correct editing in Verify output that caused a seg fault.
1110 kes Insure that bat.conf is not overwritten during installation.
1111 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1112 while I was implementing migration in March 2006 !
1114 ebl Cleanup file relocation, using char *RegexWhere instead of
1115 char *where + bool where_use_regexp
1116 kes Update some manpages and add bat manpage.
1117 kes Make a first cut at converting bacula.spec.in for bwx-console
1119 kes Apply patch from John Goerzen to add hostname as fourth argument
1120 to make_catalog_backup script.
1121 kes Fix typos I introduced into bsmtp.c
1122 kes Make pm_strxxx() routines handle input of NULL pointer. This
1123 is to protect from NULL pointers returned from SQL databases.
1124 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1125 kes Add more debug to FIFO code -- fix fifo regression test.
1127 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1128 kes Add thread timer to bnet_connect() to break from OS if wait time
1131 kes Update Win32 build to include new files, new symbols, and
1133 kes Implement socket level heartbeat (tcp_keepidle)
1134 ebl Commit File relocation patch
1135 kes Make bat have 'make install' target.
1136 kes Warn during install if old gnome-console binary found.
1137 kes Warn during install if old wx-console binary found.
1138 kes Add -8 option to bsmtp command line to add content type utf-8.
1139 Fixes bug #809. (Character coding problem in bsmtp).
1140 kes If < is found in target (from, to, cc) then do not enclose the
1141 target in < > in bsmtp. Fixes bug #772 (malformed address).
1142 kes When printing certain items in dbcheck, stop after 300000.
1143 Fixes bug #822. (dbcheck loops).
1144 kes Incorrect status in Dir after waiting for mount with poll set.
1147 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1149 kes Print waiting to reserve a device every 5 mins.
1151 kes Don't call close_part in label.c if tape and relabel.
1152 kes Don't free volume if busy in close() -- should help with
1154 ebl Fix #824 RunScript bug (After script could be execute twice)
1155 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1156 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1157 Add a regression script to test RunScript
1159 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1162 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1163 deprecated. No additional bugs will be fixed, and they will be dropped
1164 in a future release (probably 2.4.0).
1165 kes Change name of wx-console to bwx-console to make it more Bacula
1167 kes Change the name of gnome-console to bgnome-console to make it
1170 kes Some time in March, a Feature Request with patch from Jorj Bauer
1171 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1173 The ability for the director to validate a Client (FD) CN against
1174 an arbitrary set of patterns rather than the hostname, with
1175 A new 'TLS Allowed CN' set of directives which are implemented
1176 in the Client resource. Then pattern matching is used in place
1177 of hostname matching against the Certificate's CN. As an example, we
1178 have certificates which (a) use a local CA, and (b) have a CN of the
1180 kes Add new/changed entry points to Win32 build
1181 kes Create unaccepted-projects for projects that are not accepted.
1182 kes Simplify locking in the reservations system.
1183 kes Add more debug code in reservations.
1184 kes Make sure error condition on reserving a volume is handled correctly.
1185 kes Correct handling of volume_in_use.
1186 kes Correct handling of initializing a device.
1187 kes Move handling of broadcasting releasing a device into release_device().
1188 kes Correct attaching dcr to dev so that it is only done if device
1189 is properly initiated.
1191 kes Locking debug level tweaks in SD.
1192 kes Tweak new Volume code.
1194 kes Add exec external-command [wait-seconds] to bconsole. This
1195 executes the external-command. Note! normally external-command
1196 should be enclosed in double quotes.
1197 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1198 it should normally be off in a production system.
1200 kes Implement die command for SD so that we can force it to dump.
1201 kes Implement SD lock debug code.
1202 kes Implement new algorithm for keeping Volume list in SD. It
1203 is now owned by the device.
1205 kes Implement new code for freeing in use volumes that should
1206 resolve if not all, some of the problems of multiple drive
1207 tape conflicts described in bug 801.
1209 kes Fix gui/bacula-web/images files in svn.
1210 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1212 ebl Fix a bug in batch mode (in string escape)
1213 kes Correct migration prune SQL typo that crept in in a
1214 recent 2.1.x change.
1216 kes Move bnet_despool() into class in bsock.c
1217 kes Modify job report to include director name and Build OS.
1218 kes Move drop root privilege and check_catalog() before fork.
1219 kes Add update database scripts (version 9 to 10) to updatedb directory.
1221 ebl Check size and age of each file after its backup to see if
1222 it has changed during backup, if 'checkfilechanges' is set.
1223 The FD will do an extra check (stat(2)) after
1224 each file backup. mtime, ctime and size are compared with
1225 'before backup' information. If time or size mismatch, an
1226 error message will be generated. You must upgrade FD to use it.
1228 kes Make database name and user configurable
1229 --with-db-name=xxx --with-db-user=xxx
1230 kes Add back database type to message.c for debugging.
1232 kes Implement dir_sql() which issues an SQL query.
1233 kes Modify bat medialist to use dir_sql() and do some minor C++
1234 formatting as well as eliminating a number of pointers, simplifing
1237 kes Fix some of the mtx-changer grep commands for tape label readers.
1238 kes Convert a number of bsendmsg into the appropriate send/warning/error
1239 message class calls.
1240 kes Suppress the using database message in the .sql command.
1241 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1243 kes Add context menu for floating a window.
1244 kes Some minor cleanup and name changes in qt-console
1245 kes Add doing mt setblk 0 in Win32 mtx-changer.
1246 kes Apply Martin's bug fix to move definition of ENODATA for
1248 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1249 sqlite2 and sqlite3.
1251 kes More pruning cleanup.
1252 kes Turn on wait_for_drive by default in mtx-changer.
1253 kes Turn on Batch insert code by default as it now passes regression.
1254 kes Add ./configure --enable-bat to enable building of Bat.
1255 No install yet though.
1257 kes Implement a new .sql command for bat.
1258 kes Implement code to turn off pruning in obtaining the next volume.
1259 Pruning is turned off for the status dir command, but turned on
1260 for SD requests and for the list nextvolume command.
1262 kes Correct Qmsg() that was not updated correctly when committing a
1263 previous change (probably the recent TLS patch).
1265 kes Write new subroutine is_volume_purged() that explicitly checks
1266 if the Volume is purged, and if so marks it as such. This should
1267 resolve problems reported about needing to mount twice to recycle
1269 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1270 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1271 amount of duplicated code.
1272 kes Do volume pruning only for the Media Type desired (reduces pruning time
1273 if multiple Media Types are in the same pool).
1274 kes Implement more detailed info in the Job report for the Bacula version
1276 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1278 ebl Add bbatch tool to bench database and insert mode.
1279 Fix sql quote stuff in batch mode
1280 Fix sql stuff for mysql
1282 kes Correct problems with am/pm scheduling. Fixes bug #808.
1283 kes Implement new prunning code that prunes up to 1000 jobs at
1284 the same time. The same technique can be applied to a number
1285 of other prune/purge subroutines.
1286 kes Add an insanity check when starting a new tape job to ensure
1287 that the tape position has not been changed. If so fail the
1289 kes Fix Win32 build for dlls to add the folllowing:
1290 src/lib/bsock.c -- new file with new entry points
1291 src/lib/dlist.c -- new entry points
1292 src/cats/sql_create.c -- new entry point
1293 src/cats/sql_cmds.c -- new DATA item exported
1295 ebl batch mode cleanup bscan-test is ok now.
1296 kes Implement SD code to check length of disk volume before appending.
1298 kes Correct return status on db_batch... routines.
1299 kes Add call to db_write_batch_file_records() to migration code.
1300 ebl Fix AfterJob timing
1301 kes Move the checking of the database in initializion of the Director
1302 to after we drop privileges. This avoids the need for both root
1303 and bacula access to the DB.
1304 kes Correct a misplaced variable definition in src/filed/backup.c
1305 kes Correct how the new batch insert db_create_attributes_record()
1306 uses the arguments. Caused a seg fault in bscan.
1307 kes Implement lock() and unlock() methods in DEVICE class.
1308 Implement block() and set_block(xx) methods in DEVICE class.
1309 kes Modify bnet_connect() so that it uses time() to check for the
1310 wait time expiring (on some OSes, some system calls may not
1311 return immediately).
1312 kes Modify Verify to obtain the previous JobId when it is actually
1313 running rather than at schedule time (as it was in 1.38.x).
1314 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1316 kes When checking pid in pid file, continue running if the pid is
1317 the same as ours. This occurs on IRIX after a system crash.
1320 kes Extend new GUI API.
1321 kes Make the ua structure a class, and implement send_msg(),
1322 error_msg(), warning_msg(), and info_msg().
1324 kes Apply fix from for building wx-console on the Mac from
1326 kes Implement new select mechanism for GUI programs.
1327 kes Reorganize initialization of stackedWidgets in bat.
1329 kes Add updated nagios plugin supplied by Christian Masopust.
1331 kes More bat implementation.
1332 kes File migrate bug with Pool Occupancy using mediaid instead
1333 of jobids. Fixes bug #795.
1334 kes Fix orphaned buffers in filed backup and verify due to
1335 crypto buffers not freed during errors. Fixes bug #789.
1336 kes Extend new GUI api code to tree commands.
1337 kes Ensure that tree and dot commands check console ACLs.
1338 kes Permit marking directory with trailing slash.
1339 kes Allow 20 console connections (instead of only 10).
1341 kes Add smartctl call to bacula-sd.conf as an example of getting
1344 kes Modify jobq.c to let simultaneous restore jobs run. This may
1345 cause them to fail if they cannot get a drive.
1346 kes Add Client Connect Wait to Storage daemon to permit users to
1347 modify the time the SD waits for a FD connection.
1349 kes Correct virtual changer check which was backwards. This caused
1350 volumes to be unloaded into slots already occupied.
1352 kes Apply Command ACL filter to JobId list in restore command.
1353 kes Correct typeo in var.c patch.
1355 kes Don't let Bacula prune File or Job records for the current Job.
1356 kes Fix variable substitution pad + inc bug reported (with patch)
1359 kes Correct SQLite log table index as reported by Luca Berra.
1361 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1363 kes Begin implementing new comm signals for API.
1364 kes Fix a few places in lib/message.c where the open fd may
1366 kes Continue implementing lib/bsock.c (real class). Make jcr,
1367 who, host, and port private. There are new methods to access
1368 them for non-class use. This required touching a number of files.
1370 kes Add LANG=C to autoconf/randpass so it works with languages other
1371 than English. Fixes bug #788.
1373 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1375 You will not be able to generate Include/Exclude list any more.
1376 It will be fixed soon.
1377 If you want to use this, you can apply
1378 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1380 kes Restore of sockets created false error messages because Bacula
1381 no longer restores sockets, but the code was still trying to
1382 set the attributes on a non-existent file. Reported by a user.
1383 ebl finish RecyclePool feature
1384 Media will takes Pool.RecyclePool
1385 when moving from Scratch to a Pool or when user will do
1386 update volume=xxx frompool
1387 To use it, add RecyclePool = aPool to your Pool resource
1390 RecyclePool = Scratch
1394 kes Expand new BSOCK class adding signal() and new BNET signals.
1395 kes Begin enhancing the dot commands adding a new API function
1396 that returns more information and will make it easier
1397 to interface to the Director from a program.
1399 kes Make DEVICE fd private. Its new name is m_fd, and can be
1400 obtained with dev->fd() outside the class. This is the
1401 first of many DEVICE members to be made private.
1402 kes Implement Michael Renner's idea on having a virtual disk
1403 changer. I made some minor modifications (e.g. I did not
1404 implement the Virtual Changer directive, but simply set
1405 the Changer Command to an empty string.
1407 kes Implement a BSOCK send() method that writes the whole record
1408 in a single write() request rather than in two.
1409 ebl add update volume=xxx recyclepool=yyyy
1410 volume takes recyclepool from pool when using update volume=xxx from pool
1412 kes Fix encryption deblocking bug, which caused some restored files
1413 to be truncated. This fixes bug #763.
1414 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1415 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1417 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1418 ebl Use btime_t instead of uint64_t in media patch.
1420 kes Optimize the use of the database a bit in the Status dir command.
1421 Only open it when needed, ensure that if any previous database
1422 was opened, it is closed.
1424 kes Correct VolCatBytes bug from media patch.
1425 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1426 in the case of orphaned records.
1427 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1428 and File records in 300K chunks to be more efficient. This
1429 idea came from Juan Luis Frances (if I remember right).
1430 kes Apply Eric's scratch patch that moves a purged Volume to
1431 the RecyclePool. Question: how is RecyclePool set? what
1432 happens to the ScratchPool?
1433 kes Apply Eric's media patch that collects read/write media
1434 times as well as byte counts. This patch requires a
1435 simultaneous upgrade of the DIR and SD. Note, there
1436 should be some way to turn off timing. I'm not sure
1437 times are in Bacula units.
1438 kes Apply Eric's batch-insert patch.
1440 kes Update projects list.
1442 kes Implement Include/Exclude file lists in FD as dlists using
1443 the new dlistString class. This permits efficiently having
1444 large include/exclude lists and completes project Item 25.
1445 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1446 console is authorized to cancel the job. This fixes bug
1448 kes Modify SD so that the VolCatJobs medium record is updated
1449 at the beginning of a Job rather than the end. This
1450 fixes bug #775 where exceeding MaxVolJobs caused jobs
1452 kes Added a mutex around getting and setting Volume information
1453 so that multiple simultaneous jobs will single thread.
1455 Switch to using Subversion
1456 kes Remove src/pygtk-console/ from configure
1458 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1459 plus the entrypoints.
1460 kes Apply patch supplied that corrects debug print
1461 in canceling jobs for max run time. Supplied as
1462 part of bug #621, which was previously fixed.
1464 kes Test on job_canceled() and sd_msg_thread_done inside
1465 loop starting the message thread to avoid a race condition.
1467 kes Remove rl_catch_signal from console.c as it conflicted
1468 with the header definition. Fixes bug #765.
1469 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1471 kes Clarify some stored/acquire messages to indicate if the
1472 problem is with read or append.
1474 kes Fix memory leak with storage ids in cats/sql_get.c
1475 kes Terminate watchdog earlier to avoid reference to released
1476 memory -- reported by Jason Austin.
1477 kes Move closing the database from jobq.c to the director daemon
1478 termination routine. This fixes memory leaks for shadow jobs
1479 (i.e. migration jobs).
1480 kes Free up the unique jobid chain items in migrate.c. This fixes
1481 a memory leak problem.
1482 kes Convert some ugly looking for statements to use foreach_alist
1483 in findlib/find.c. This will facilitate converting the structures
1484 to use dlist (for large include/exclude lists).
1485 kes Fix a bug in the btree.c and btree.h routines, then rename them
1486 rblist and add them to be built in src/lib. Include some new
1487 methods written by Rudolf Cejka that make the code more readable
1488 (hides some of the ugly casting).
1489 kes Add set_next() and set_prev() methods which make the code much more
1490 readable. Also add a new dlistString class that facilitates storing
1491 strings in dlists. To be used in the large include/exclude lists.
1492 kes Make some trivial modifications to lib/tree.h that use rblist
1493 rather than dlist for storing the tree links. This was suggested
1494 by Rudolf Cejka. The result of this is that the restore tree now
1495 uses red-black binary trees rather than simple linked lists. This
1496 should give rather dramatic speed improvements for directories
1497 contining large numbers of directories/files (more than 10000).
1499 kes Fix maxruntime bug #621.
1501 ebl Implement the include JobID in spool file name project.
1502 kes Reorder projects file in order determined by Jan 2007 vote.
1503 kes Implement item #12 on project list -- quick release of FD by
1505 kes Fix open of SQLite3 db where user does not have write permission
1506 so that DIR does not crash. Fixes bug #761.
1508 kes Add back missing @ in Win32 Makefile.
1509 kes Change 'Device not configured to autolabel' from INFO
1511 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1512 which should restart an indefinite # of times.
1513 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1514 other DIR specifications.
1516 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1517 Fix path quoting in SQLite scripts.
1518 Fix problems with SHGetFolderPath.
1520 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1522 kes Fix Job restart on error bug that promotes an Inc to a Full
1523 backup. This should fix bug #755.
1524 kes Add qt-console and first cut of code.
1528 kes Fix Bacula->Documentation link on Win32 to point to index.html
1529 instead of bacula.html. Fixed bug #750.
1530 kes Return JobId in db_get_job_record() when JobId==0. This should
1532 kes Do not release source pointers when restarting a failed job.
1534 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1535 This *should* fix bug #747.
1536 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1539 kes Modify USTORE constructor to set an empty store_source string,
1540 and don't copy the store_source string in a cancel. Hopefully
1541 this will fix Arno's seg fault, bug #744.
1542 kes Add back code to disable conio in configure. Fixes bug #743.
1543 kes Correct the Options scanner in the FD to correctly handle
1544 SHA1 option, which was eating the next option. Reported by
1546 kes Add code to indicate when the SD is spooling, spool wait, and
1547 despooling as requested by Alan Brown.
1549 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob