1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Apply Allan Black's status dir job count patch.
29 ebl Add information about IMPORT/EXPORT slots in mtx-script.
30 kes Enhance a couple of SD debug messages.
31 kes Tweak unload flag setting and ensure it is set during swap.
33 ebl Fix #1091 about bad output in estimate command.
35 kes Modify autochanger locking to attempt to avoid race
37 kes Make sure device not busy before doing label command.
38 kes Display open() errors except when polling. Previously too
39 many were suppressed. This should fix bug #1070.
40 kes Fix Win32 reparse points. Bacula will not recurse into any
41 reparse point directory, including mount points, unless the
42 directory is explicitly mentioned at the top level (same as
43 with Unix). A file that is linked to another file will be
44 backed up -- much as Unix does for hardlinked files.
47 kes Remove double quotes from ChangeLog and ReleaseNotes
48 kes Remove StorageId test when pruning and recycling (Eric's changes).
49 kes Remove old form of locking when getting volumes -- causes deadlock.
50 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
51 the name unique and to eliminate compile time error.
52 kes Add accurate.o to Win32 FD Makefile
54 kes Fix cats dll build on Win32 after db_update_job_end_record
55 calling sequence change.
56 ebl Switch to tokyo dbm instead of htable in accurate code
57 ebl Include tokyo dbm to bacula source tree
59 kes Fix buffer overruns detected by Coverity.
61 kes Tweak joblog display.
63 kes Implement --without-qwt
64 kes Fix layout of restore tree dialog
65 kes Add configure bat QWT libraries, so that bat can be built
66 with or without the QWT libaries.
68 ebl Add dummy tape driver for regression tests.
69 kes Make sure we unload the right slot when swapping.
71 kes Add debug times, reduce size of two-pool-changer test
73 ebl Tweak autoconf scripts for faketape
75 kes Improve SD reserve debug code.
76 kes Testing an improvement to free up volumes no longer in use.
78 kes Rework SD acquire for read to handle autochanger Volume
80 kes Implement regression that explicitly tests swapping a Volume
81 from one drive to another.
82 kes Enhance disk-changer to detect most error conditions.
83 kes Fix SD code so that it properly swaps a Volume between drives.
86 kes Apply libdbi patch from Joao Freitas for regress and for
87 Bacula trunk. Regress now works with libdbi. Nice.
88 kes Apply .nobackup patch from bug #1077 submitted by
90 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
91 name into jobs cloned via the run directive.
93 kes Prevent a Volume that is being swapped from being freed from
94 the volume list. This will most likely fix, at least partially,
96 kes Fix strippath so that it does not get a buffer overrun and crash FD.
98 kes Remove 50 millisec wait in SD that broke debugger.
99 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
100 that a job may run, counted from when the job was scheduled.
101 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
102 a job may block waiting for a resource, counted from when the job starts
103 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
104 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
105 that implements multiple commands per line in the console when using
106 readline. Modify the default to use a semicolon as the command separator.
108 ebl Fix SQL query in migration code.
109 ebl Make accurate mode with hash disk pass regression tests
111 ebl Implement first cut of accurate backup with hash disk.
113 kes Force unload of volume when wrong volume mounted in SD.
115 kes Fix bat seg fault at termination.
116 kes Add Bacula generated version to bat about box.
119 kes Experiment with allowing multiple read jobs.
120 kes Move final volume swapping code to DCR method and
121 call it from acquire_for_read().
122 kes When wrong volume is mounted during read, unload_autochanger.
124 kes Integrate the libdbi changes from Joao Henrique Freitas
126 kes Stop searching for Volumes in SD askdir if DIR returns the
127 same volume name twice in a row.
128 kes Close bat console windows first to eliminate error message
131 kes Tweak the swap Volume from one drive to another code so that
132 it now seems to work.
133 kes Resolve several problems with recycling that broke the new
134 code (these problems are in 2.2.9 as well).
135 kes Remove the volume lock when calling the sysop code.
136 kes Don't mark a reserved volume with no writers as unused otherwise
139 kes Rework class structures for VOLRES, DCR, and DEVICE to make
140 the method names a bit more logical, and for more logically
141 handling the responsibilities.
143 kes Remove redundant code in terminating the scheduler that just
144 causes a seg fault in many cases.
145 kes Cleanup releasing a volume and make it a DCR method.
146 kes Improve algorithm for detecting pre-reserved volume and
149 kes Tweak volume swapping code so it works.
150 kes Correct name overloading in mount.c
151 kes Replace released flag in VOLRES with reserved and add access
152 methods for the VOLRES class.
153 kes Prevent volume from being released while being swapped.
154 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
156 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
158 kes Refactor parts of stored/mount.c
160 ebl Add sanity checks for VolWriteTime and VolReadTime
161 ebl Take care of bad clock changes while computing VolWriteTime
162 and VolReadTime. This should fix or limit #1066
163 kes Correct error string numbers in dird/catreq.c
164 kes Restructure reserving, acquiring, and mounting volumes. Calls to
165 autochanger are deferred for mount.c -- simplifes the code.
167 kes Do not prune any running job. It just fails the job.
168 kes Lock the volumes when changing dev->reserved_device and marking
169 the volume unused otherwise the device can get reserved by
170 another job before the volume is released, thus blocking it.
172 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
173 kes Fix bug #1063, reuse of freed ptr in list nextvol.
174 kes Release regex compile buffer in filed/job.c
175 kes Add proper type of const char in sql_create.c
176 kes Turn off debug in daemon termination routines
177 kes Move free_volume_list() before devices are freed in stored.c
178 kes Fix reference to uninitalized stack variables in bregex.c.
179 This should correct bug #1067.
181 kes Fix possible seg fault in SD when freeing a volume entry.
183 kes Implement unload_dev() before swap device.
184 ebl Add statistics prunning with option and menu
185 kes Separate unload_dev() from unload_other_device() in autochanger.c
187 kes Apply patch from bug #1069 that corrects spurious error messages
188 when ACLs enabled on SGI but no ACL exists.
189 ebl Fix small segfault in bacula-sd when debug level is 500
190 kes Modify run_program() and run_program_full_output() to use
191 call by reference for the results string. This corrects a long
192 standing problem where the address of the string may be changed
193 in the subroutine but not in the calling program.
195 kes Re-enable code to remember last volume mounted on a non-tape
197 kes Add patch supplied in bug #1068 that fixes a SD crash when using
198 a Virtual autochanger.
199 kes Generate correct JobMedia records during spooling/despooling when
200 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
201 <tih@hamartun.priv.no> for excellent analysis and testing.
203 kes Tweak hash algorithm for htable using Martin Simmons idea
204 for doing a circular shift.
205 kes Remember what volume is in VTLs (previously turned off for
207 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
208 pointed out some problems in creating JobMedia records during
209 spooling with concurrent jobs. Fix the problem by updating the
210 start file position before despooling and generate a jobmedia
211 record at the end of despooling.
213 kes Fix handling of JobMedia records during spooling and when a
214 Volume is changed without actually writing data to the Volume.
216 kes Rework certain SD locking based on gdb tracebacks of deadlocks
217 sent by Eric. This code now uses only the volume_lock() rather
218 than the reservations lock when at EOM and acquiring a new
220 kes Ensure only one exit point in several subroutines.
222 kes Implement bsock code to permit locking. Use the new code in Verify
223 in the FD to prevent the heartbeat thread from disrupting the Verify
224 data sent to the Dir.
225 kes Modify SD locking to eliminate locking the reservations system from
226 outside the system. Use the volume lock when getting media data
227 and reserving a new volume at end of media.
228 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
229 when SD starts are not locked into place.
231 kes Fix error compiling runscript code on 64 bit machines.
232 kes Tweak Win32 mount point code.
233 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
234 cleared giving bad file estimate).
235 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
238 kes Keep Schedule run lists in order as suggested by
241 kes Implement autostart scripts for Debian.
242 ebl Implement upgrade catalog scripts.
244 ebl Apply jobstat patch for long term statistics. Have to implement
245 purge stats command and upgrade scripts.
246 kes Fix mtx-changer.in for broken Debian mt program.
248 kes Fix large number of JobMedia records reported by Eric Bollengier.
250 kes Apply doc fix from bug #1062.
251 kes Resolve crash and improper restore wx-console Win32 restore
252 GUI. Fixes bug #1065.
253 kes Update Win32 wxWidgets to latest version.
254 kes Attempt to do correct handling of Win32 mount points. Should
256 kes Fix Win32 FD backup/restore memory leak due to improper termination
257 of BackupRead/Write. This fixes bug# 1038.
259 ebl Reduce memory usage for accurate backup, working only with ctime
260 and mtime. (not all Lstat field)
261 About 40MB for my linux system (400.000 files)
263 kes Add dcr->reserved_volume flag that allows us to release a volume
264 even if it is not vol->released. This allows maxvol2 to work when
265 Volumes expire and we are already writing to the device (i.e. a
266 volume is pulled out from under us by another job terminating after
267 we reserve the drive).
269 ebl Permit multiple command/console per runscript definition.
270 RunScript { command = /bin/true ; command = /bin/false ... }
271 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
272 (restart an application) just after the VSS snapshot on windows.
273 kes Don't zap dcr values during release_volume() as they might
274 have the next Volume to be mounted.
275 kes Fix AIX prototype.
277 kes Second cut of drive switching during backup.
280 kes Update Win32 version of wxWidgets to most recent version.
281 kes Tweak Copy job details.
282 kes Rework dir_find_next_appendable_volume to make a bit more effort
283 to find a suitable volume before giving up.
285 kes Make ask_sysop_to_create... to return if waken from wait.
286 This helps get out of blocked conditions.
287 kes Experimental implementation of switch_device in reservations.
288 kes Implement FD version to allow easier protocol changes.
289 kes Add Plugin Options string -- not yet passed to FD.
290 kes Implement PluginOptions ACL.
292 kes Attempt to correct problems with restores with autochangers and
293 use counts going negative
294 kes Rework SD status command and implement API for bat. Implements
295 header, runing waitreservation, devices, volumes, spooling,
296 and terminated status keywords.
297 .status storage=xxx <keyword>
298 kes Clarify TLS error message by adding double quotes around name.
299 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
300 kes Pass jcr to tls routines so debug messages can be handled better.
301 kes Rework jobq resource allocation code, and possibly fix a bug
302 that caused reference counts to get out of sync.
304 kes Rename fd/dir plugin to use Bacula standard underscore.
305 kes Plugin work -- bring dir up to fd level.
306 kes Start implementation of VTL code
307 kes Fix Win32 build after adding new cats subroutine.
309 kes First cut at Duplicate Job implementation.
311 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
312 kes Start PluginOptions string, and refactor a bit of ua_run.c
313 ebl Apply Allan patch that permit to reset recyclepool.
315 kes Test patch -- possible fix or improvement for bug #1053
316 kes Refactor FD and SD status commands to permit new API code in
317 SD, and to fix Win32 build.
318 kes Win32 build is now working.
320 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
321 some ideas in patch from Scott Bailey.
322 kes Begin implementation of duplicate Job control.
323 kes Fix some of Win32 build after recent additions.
324 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
325 which causes the FD to detect whether or not the OS has the
326 honor no dump bit (*BSD systems), and if so, to skip backing up
327 any file with this bit set. The feature is enabled by setting
328 'honor no dump flag = yes' in the Options section of a FileSet.
330 kes Correct po warning message with datarootdir
331 kes Implement more code in dird.c to put configuration parsing in
332 a class rather than use globals.
333 kes Restructure SD status command for implementation of bat API
336 kes Suppress incorrect 'Will not descend from x into y' messages.
337 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
338 daemon globals used by parser.
339 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
341 kes Fix free of plugin_list when none exists.
343 ebl Apply accurate project patch.
345 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
346 on non-mempool object)
347 kes First cut of converting FD .status to work with bat API.
349 .status client=XXX header
350 .status client=XXX running
351 .status client=XXX terminated
352 kes Implement first cut of Copy Job.
353 kes Implement Catalog in Pool resource. It overrides catalog specified
354 in the Client resource.
356 kes Apply patch (with some difficulties) from Joao Henrique Freitas
357 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
359 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
360 ftruncate() actually works. In the case of some (cheap) NAS devices,
361 it does not, and so recycling NAS Volumes does not work. The code
362 simply unlink()s the file, then recreates it. This fixes bug #1011.
364 kes First incomplete cut of big malloc blocks for htable.
365 kes Tweak plugin code.
367 kes Plugin debug code + tweak a couple bat dialog layouts
369 kes Fix creating first JobMedia record during Migration to include
370 proper index. This caused slow restores of migrated jobs.
371 kes Temp fix to plugin name file_index.
372 kes Bacula backed up and restored a MySQL database.
374 kes Implement plugin restore.
375 kes Implement parsing of db_driver to give db_type index.
377 kes First cut of plugin restore code.
378 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
379 and do not strip paths on symbolic links.
380 kes Set catalog backup database and user name from values specified on
381 the ./configure line.
382 ebl Fix #1031 about wrong pool source information in job report.
385 kes Remove a redundant jcr argument to find_files, match_files, and
387 kes Implement '.status dir header|scheduled|running|terminated' that
388 prints the requested status section. With the exception of the
389 header, the other reports have fields separated by tabs (\t).
391 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
392 a resource embedded run command to find a since time if no explicit
393 since time was supplied on the command line.
394 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
395 that updates the state file at job termination time in addition to
396 when the daemon terminates.
398 kes First version where a plugin did a backup.
399 bpipe-fd.so created a backup file, wrote a test
400 string to it, and Bacua could restore this fabricated file.
402 kes Implement DB Driver = string for the DBI driver.
403 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
404 kes First cut of code for loading Win32 plugin dlls. Implement
405 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
406 and implement a dlfcn.h file based on opengroup's definitions of
409 kes First cut plugin directives.
411 kes Apply patch from bug #1049 to prevent stripping the path on a
413 kes Attempt to fix bug #1047 where stripping a path corrupts the
414 heap. Waiting for feedback.
415 kes Correct the Mount message not to suggest labeling a new tape
416 when doing a restore. Submitted by email by John Stoffel.
417 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
418 FD by using casting. Reported in bug #1042.
420 kes A bit of crypto cleanup. More later.
422 Release Version 2.2.8
424 kes Apply patch from Martin to correct bug #1040, bscan sets existing
426 kes Fixed important spelling error in doc -- bug #1045.
428 ebl Fix bextract to be able to extract non-portable Win32 data to
430 kes Move initialization of read/write res lock earlier in the code.
431 This fixes the crash with a null conf file. This fixes bug
433 kes Redefine CURES in lib/parse_conf to be URES and move it all
434 into lib/parse_conf.c -- this responds to bug #1042, but does
435 not fix it. The fix is not to compile with FORTIFY_SOURCE.
436 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
437 the trunk SVN. I don't think this was reported as a bug.
439 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
441 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
443 kes Add DataDespooling and DataCommitting status (committing is
444 the last despooling).
445 kes Finish implementation of new reservations code noted below.
447 kes Fix bsnprintf for float point numbers. I broke recently when
448 parameterizing some variables. This fixes bug #1036.
449 kes Undo recent reservations changes ... will apply them later
450 when they work better.
452 ebl Fixes #1034 which cause mysql to hang the connection after 8h
453 ebl Change default statistics target of filename.name and path.path
454 fields for PostgreSQL. This speeds lookup by indexes. Thanks
456 kes A few more tweaks to new reservation code. Make sure to clear
457 vol released flag when retaking volume. When reading label and
458 label is bad mark volume unused. When recycling, mark volume
459 unused so it can be renamed.
461 kes Fix reserve_volume() so it doesn't release a volume in use
462 (i.e. a volume entry not marked released). This should be
463 the last part needed to fix bug #1018.
465 kes Move Heartbeat documentation from Job to Director resource.
466 This fixes bug #1033.
468 kes Fix existing switch drive SD code to call autochanger to release
469 any old volume. This must be done to keep the autochanger from
470 releasing subsequently newly reserved volumes in doing a close().
471 This should fix bug #1018.
472 kes Fail if attempting to get console input in batch mode. This
473 should help fail RunScript console commands that are incomplete.
474 kes First cut implementing switch_drive() in SD (not actually called).
476 kes Implement first cut running console commands in a RunScript.
478 ebl Fixes bug #1028 where 'Selection Type' option was not usable
480 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
483 Release Version 2.2.7
485 kes Add new free_tls() entry point so that Win32 builds.
486 kes Fix compile warning in src/lib/util.c
487 kes Fix entry point for edit_job_codes() so that Win32 builds.
488 kes Fix seg fault Frank Sweetser reports in regression testing
489 on his systems. The problem was that the original author of
490 bsnprintf.c did not take into account the side effects of
491 using ++x in the argument to a #define.
492 kes Make SD protocol backward compatible with version 2.2.x.
494 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
495 because Bacula no longer restores sockets.
496 ebl Always use ignorecase fileset option on win32 FD.
498 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
499 that implements double quoting include names in conf files,
500 and also allows piping input by having the first character
501 be a vertical bar (|).
502 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
503 that implement %f in RunScripts to pass the FileSet name.
504 kes Skip leading | when lex input comes from a pipe as suggested
505 by Michael Stapelberg <michael@stapelberg.de>.
507 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
508 Nerijus Baliunas <nerijus@users.sourceforge.net>
510 kes Implement Plugin Directory and plugin events.
512 kes Implement a security enhancement: TLS authentication but no
513 encryption. Enabled by setting 'TLS Authentication = yes'.
514 Note when this is on, TLS encryption is turned OFF!
516 kes This patch corrects a problem where the maximum concurrent storage
517 jobs counter gets out of sync during restore jobs causing jobs to
518 'wait on max Storage jobs'. This patch fixes bug #1009.
520 kes This patch fixes bcopy so that it produces correct Volumes.
522 kes This patch eliminates spurious output to the console during a VerifyVolume
523 job that contains encrypted data. It fixes bug #1024.
525 kes This patch prevents the 'status dir' command from trying to use a scratch
526 volume and possibly moving it from one pool to another. This patch fixes
529 kes Add new include to postgresql.c suggested by Marc Cousins so
530 that it compiles correctly with pgre version 8.3.
532 kes Fix --archivedir addition to configure. Replace it with
533 --with-archivedir in configure.in This fixes the regression
535 kes This patch fixes bug #1012 where the job is canceled because
536 of Max Run Time exceeded when the job has not yet started.
538 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
539 one 'part' to write. Instead of each part being stored on disk,
540 written to DVD, then deleted from disk, all parts are written to disk,
541 and only the last is written and deleted from disk.
542 kes This patch fixes the status command to include the formating string for
543 JS_AttrInsterting. It fixes bug #1021.
544 kes This patch should fix the Mac OS X build problem on the latest
545 Darwin, where sys/types.h was not included correctly (apparently
546 due to a change in the Mac headers). The solution was to explicitly
547 ensure that it is defined for the ./configure.
548 This patch also has a rebuild of configure that includes the Debian
549 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
550 kes This patch should ensure that queued messages to the console are
551 displayed as soon as possible. It should fix bug 1007, but has been
552 reported not to work.
554 kes This patch fixes the infinite loop when trying to increase the
555 maximum number of volumes in a Pool during the add command.
556 This patch fixes bug #1008.
558 Release Version 2.2.6
560 db Remove extra data on estimate command in joblist for bat.
562 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
563 really change anything, but is the beginning of doing it *right*.
564 To do it completely right the LastWritten date must be passed to
565 the SD, but it is not yet done.
566 kes Minor tweaks to some bat restore SQL.
567 kes This patch fixes bug #1003 where putting the message output from
568 a Verify job into the catalog results in a recursive loop. The problem
569 seems to show up only with postgresql (to be verified).
570 kes Correct %x to %p in postgresql debug statement.
572 kes Fix bug #942 where lots of emails where generated when the heartbeat
573 interval was low and Bacula wanted a different tape from the one in
576 ebl Add new SD despooling attributes and Dir inserting attributes
577 job status codes in the catalog (Status table).
579 ebl Use qmake-qt4 instead of qmake when available (debian system).
581 kes Add a security warning to src/cats/make_catalog_backup.in indicating
582 that passing the password via the command line (arg 3) is insecure.
583 This responds to bug #990 (it doesn't fix it).
585 kes Set default debug_level to zero. This corrects bugs #991 and #993.
586 kes Fix a crash in bat when it cannot connect to the Director for example
587 if the Director is not running.
588 kes Remove redundant INDEX (JobId) from File table in the trunk.
590 kes Make explicit exception to GPL in LICENSE to permit linking
591 the Win32 FD with Microsoft VSS code.
592 kes Apply the Solaris package patch from
593 Masopust, Christian <christian.masopust@siemens.com>
594 kes Apply the patch to optionally add a timestamp in the debug output
595 submitted by Mariusz Czulada <manieq@wp.eu>.
597 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
598 backend (sql_strerror). Fixes bug #989
600 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
601 It applied with no problems.
602 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
604 kes Redirect stderror to stdin on mt status command in mtx-changer.in
605 since the status is returned on stderr on Solaris.
606 kes Activate Close button on tray-monitor window. This fixes
608 kes Check for NULL item in parse_conf.c before calling it. In the
609 case of Device, there is no item and this caused a seg fault when
610 Device appears in the conf file.
611 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
612 avoids pulling in config.h multiple times in some new code.
614 kes Fix spurious warning message printed when creating a volume with
615 a LabelFormat. This fixes bug #976.
617 Release Version 2.2.5
619 kes Add JobId in place of Job name in all the Jmsg() output.
620 kes Correct the APP_DESC for the Win32 storage service (remove an e).
622 kes Make maxvol-test and new more strict maxvol2-test work.
623 kes Print JobId in all Jmsg() job output.
625 kes Add new SD despooling attributes and Dir inserting attributes
626 job status codes. This fixes bug 961.
627 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
629 kes Fix doc issue. This fixes bug #963.
630 kes Fix listing performance problems in bat. Pointed out by
632 kes Remove old debug code.
633 kes Fix bat code that tests for Win32. This should fix bug #968
634 kes Query 5 list wrong Vol after migration. This fixes bug #960
636 ebl Fix #969 where user can't change Replace option in restore menu.
638 kes Save jcr in thread specific data (tsd) for each thread.
639 kes Make Dmsg() print JobId as -%u.
640 kes Make Jmsg, Emsg, and others automatically pickup the jobid
641 for the thread if it exists.
642 kes Remove old reservation debug jid code.
643 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
644 ebl Add an option that permit to specify spool size in job
645 definition. (Applying patches/testing/spoolsize_per_job.patch).
646 You must upgrade SD and DIR at the same time.
647 dvl Add new configuration item --archivedir
648 dvl Adjust regression tests to use tmp not /tmp. This will allow
649 multiple concurrent runs of the regression tests.
651 kes Fix race condition that drops final block written to volume.
652 This happens in rare cases with multiple simultaneous jobs
653 when the Volume fills. This fixes bug #964. May be related
654 to bug #935 and possibly #903.
655 kes Eliminate more strerror() and replace with bstrerror().
656 kes Remove BSD getopt and replace with unrestricted IBM version.
657 kes Fix Win32 build for changed calling sequences.
658 kes More tweaks to the mount volume routines to get everything
659 right. Changed variable name from find to have_vol, which is
660 much easier to understand.
661 kes Enhance btimer debug code.
663 kes Fix FD->SD authorization failure, which was due to spurious
664 wakeups from a pthread_cond_timedwait(). Simply check the
665 predicate before continuing. This fixes bug #953.
666 kes Add const char where needed (more to do). Remove temp debug code.
668 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
669 kes Don't overwrite error message in check_tables_version.
671 kes Unlock batch insert tables with same calls used elsewhere.
672 kes Allow starting 59 jobs a second.
673 kes Make SD session key more random.
674 kes Add retry for SQLite opening db if it fails. Probably helps
676 kes Suppress extra error messages during batch insert failure.
678 kes Add jcr to timer packets so if killed message can be sent to job.
679 kes Add JobId to all Dmsg() output.
680 kes Put some FD auth code on dbglvl rather than fixed.
681 kes Return insert attributes error message in db msg buffer to avoid
682 false error messages. Helps fix bug #966.
683 kes Separate batch init error messages. Probably helps fix bug #966.
684 kes Make SD code that contructs attribute insert check string lengths
686 kes If Dir gets an error during inserting attributes, cancel SD.
687 This reduces unnecessary error messages.
689 kes Correct search boolean for getting Volume info
690 ebl Cleanup batch insert code. Probably fixes bug #965.
691 kes Back out one small change to the reservation system (reserving a volume).
692 kes Rework how a Volume is mounted. It is now much more intelligent and
693 will always attempt to use any mounted volume if possible and reduces
694 calls to the Director asking about volumes.
696 kes Turn off some code when batch insert not enabled.
697 kes Edit FD name in connect error messages.
698 kes Rework the reservation system to take into account that the Director
699 might give us a Volume that is different from the current one being
700 used, and to ensure that we don't exceed Maximum Volume Jobs.
701 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
702 fatal error with multiple jobs running'
703 kes Add more debug code in reservation system.
704 kes Implement maxvol-test to check bug #947.
706 kes Add code to handle tray monitor separated from Win32 FD.
707 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
709 kes Add missed return in fixing verify bug -- trunk only.
710 ebl Fix a command parser issue causing a director segfault.
711 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
713 kes Increase the max block size to 4MB fixes bug #957.
714 kes ERABT if user sets min block size > max block size. Fixes bug #956.
715 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
716 is not properly mounted (recognized) during a poll.
717 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
718 Job that has differences reports Verify OK.
719 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
721 ebl Add an option to operate on all pools with update vol parameters.
722 This complete the project 20. Patch from Nigel Stepp.
723 ebl Add history support to bconsole when using readline.
724 Using Ctrl-D to exit doesn't update .bconsole_history
725 kes Modify new volume algorithm to use max MediaId for generating next
726 volume number rather than the count of Volumes. This should essentially
727 eliminate the failure rate if some volumes were deleted. Bug #921.
728 kes Begin implemention of Optimize Job Scheduling.
729 kes Implement restore callback that Dirk and I agreed on for bat
730 restore. This fixes bug #928. Restore of backup of zero files fails.
731 kes Fix SQL Catalog logging which broke with new db_escape_string
734 Release Version 2.2.4
736 kes Fix bacula_cats.def for new db_escape_string().
737 kes Increase size of name string when FD making connection to SD.
738 May fix bug #953. FD->SD connection failure.
740 kes Add code to help Dan debug 2drive-incremental-2disk test.
741 kes Add code to try to fix bug #908.
742 kes Add waits to multiple exit detection code to try to force pid
743 file to always be deleted.
744 kes Restore good dev.tar.gz to rescue set appropriate binary property.
746 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
747 trying to switch drives by checking for blocking before unblocking.
749 kes Cancel storage daemon in all cases where FD reports error. This
750 should fix virtually all cases of bug #920.
751 kes Fix db_escape_string() for MySQL which did not compile.
753 kes Fix error message that was clobbered when Dir tells SD it does not
754 have write permission on Volume. This should fix a minor point
755 in bug #942, but not the main problem.
756 kes Add code to cancel job in SD if FD connection fails. This should
758 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
759 dvl Pass jcr and db into db_escape_string() to enable better escaping
761 kes Fix migration code to get correct Volume name with multiple volumes
762 by skipping |. Fixes bug #936.
763 kes Implement patch supplied by Landon to fix bug #944 where using
764 TLS with bconsole uses 99+% of the CPU.
765 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
767 kes Move patches into patches directory.
769 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
772 ebl Using 'm' in bconsole will show messages like before,
773 and not memory usage.
774 kes Fix bug #935, and probably also bug #903 where files were not
775 restored. MediaId was not properly set in JobMedia record after
778 kes Suppress chown and chmod error messages if the FD is not running
781 kes Apply Martin Simmons' patch that should turn off the new API usage
782 when batch insert is turned off allowing building on older
784 kes Add ./configure search in qwt-qt4 for qwt package
786 kes Bacula is now free of 3rd party GPL copyrighted code!
788 kes Add guid_to_name.c/h which replace idcache.
789 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
791 ebl Detect if new PosgreSQL batch insert API is present.
792 kes Correct incorrect mempool call causing Director crash. Occurs on
793 systems without va_copy().
794 sb Update spec files for 2.2.1 release
796 kes Fix memory pool call in ua_output.c. bug #934.
797 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
798 Add test program to fnmatch.c
800 kes Integrate patch to README.vc8 from
801 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
802 edit it to get it into Unix patch format.
803 kes Implement mkpath.c to replace old FSF makepath.c
805 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
807 Release Version 2.2.1
809 kes Update POTFILES.in
810 kes Cleanup a few underquoted AC_DEFUNs in configure
811 kes Apply patch from Martin Simmons that adds a test for va_copy to
814 kes Fix bug #921 by increasing the number of tries to create a new volume
816 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
817 can be called multiple times. Implement a version for machines
818 without va_copy() that gets a big buffer.
820 kes Integrate more portable zone offset code into bsmtp.c
821 Submitted by Attila Fülöp.
823 kes Fix bad SD->FD return status reported by
824 (James Harper) <james.harper@bendigoit.com.au>
825 ebl Fix a bug in read_close_session which return random status
826 thanks to James Harper
828 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
829 and directory names during restore of single file/directories.
830 kes Add sanity checks to .sql command when string is empty. Hopefully
831 that will resolve Dirks Director crash.
833 kes Apply patch submitted by Martin Simmons that corrects a seg fault
834 in the bsmtp chat subroutine when debug is >= 10.
836 kes Fix Director crash when running bat SQL queries.
837 kes Add David's notes on Item 8: Copy pools.
839 kes Rework projects file to be current and ready for a vote.
840 kes Enhance lex scanner error message.
842 kes Tweak LICENSE file to mention BSD code.
843 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
844 if specified on the ./configure.
845 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
846 This class is intended to allow us to open a second bsock to the
847 Director while in the restore subdialog.
849 kes Fix configure to create bat Makefile before creating dependencies.
850 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
851 kes Add a tooltip to the tray monitor.
852 dvl Set the Director's PID file before dropping privs. This fixes
855 kes Update AUTHORs file
856 kes Increase the default max concurrent jobs to 20 in FD and SD to
857 correspond with the default .conf files.
858 kes Rewrite the Win32 service routines. This eliminates the 3 copies
859 some different, of the same file created by RN when porting the
861 kes Rearrange some of the Win32 directories and the placement of the files
863 kes Set DEVELOPER flag in version.h
865 ========================================================================
866 Release Version 2.2.0
868 kes Apply a second doc patch from Marc.
869 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
870 improves the tips section that discusses how to setup multiple
873 kes Update bat README file.
874 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
875 corrects a typo in the Recycle status check in db_find_next_volume().
876 This will probably fix a number of annoying problems with multiple
878 kes Modify most of dird/msgchan.c to use bsock class calls rather than
879 bnet calls -- no functionality change.
881 kes Modify the Verify output to specify if files are missing on
882 the Volume(s) or disk. Fixes confusion in bug #916.
883 kes When more than one Volume is read in a migration job, the last
884 Volume bytes reported are from the last read volume rather than
885 the last written volume. Fixed. This fixes bug #910.
886 kes Fix display of Recycle flag after update volume=foo recycle=yes.
887 It previously printed New Recyle flag is: no. This fixes bug
890 kes Correct seg fault when switching tape drives during restore.
891 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
892 be used until after 2.2.0 release.
894 kes Remove fnmatch() in SD that permitted wild card specifications.
897 kes Fix %g in filename returned by SQL for browse tree reported by
899 kes Fix configure so that it puts config.out in the cwd rather than
901 kes Attempt to fix the locking problem reported by Eric in bug #906.
902 kes Make berrno class to leave errno unchanged after constructor call.
903 kes Make bnet_server use the heap rather than the stack to allocate
904 its socket fd pointers to avoid a crash at termination. Problem
905 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
907 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
908 and putting it in depkgs-qt along with Qt4.3.
910 kes Rework code in acquire.c that switches drives for reading when
911 the Media Type does not match. This should fix bug #906
913 ebl Fix a director segfault during job setup #907
914 kes Correct seg fault in postgresql when first operation returns no
915 rows. Fixes Dirks File browser problem seg fault with bat.
917 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
918 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
921 kes Implement PopUp YES/NO dialog for bat.
923 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
925 kes Correct RunScript to terminate job in FD on failure.
926 kes Change abort_on_error and AbortJobOnError to fail_on_error
927 and FailJobOnError in RunScripts.
928 kes Minor tweaks of code formating in RunScripts, principally to
929 avoid depassing 80 columns.
931 kes Eliminate one #ifdef Win32 in bsmtp
932 kes Implement grow tool to grow a file for testing very large databases.
933 kes Add big-vol-test to test Bacula seeking with > 5GB.
936 kes Modify find_next_volume() to return all values in Media record.
937 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
941 kes Update Release notes
943 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
944 Warning, in previous beta version, all media get from scratch keep their
947 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
948 This should fix bug #842. Made a note to look at removing the temp
949 files at the end of the install.
950 kes Add ability to mount and unmount a file device providing it is
951 marked as being removable and has the appropriate mount and unmount
952 commands defined in the Device resource. This fixes bug #830.
953 kes When applying a storage override, release all previous storage
954 definitions rather than just prepending the new storage.
955 This should prevent a good deal of confusion.
957 kes Implement ./configure search for qwt libraries.
959 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
960 Win32 FD. This should fix bug #893.
961 kes Remove an unnecessary beep in Win32 init code.
962 kes Update copyright dates in Win32 executable about boxes.
963 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
964 code with a BSD getopt.c and getopt.h.
965 kes Remove sched.h from the Win32 compat directory -- not used.
966 kes Remove the Exit menu item from the Win32 tray monitor. If you really
967 need to shut it down, do it through the services panel or the command
969 kes Remove some inappropriate Bacula FSFE copyrights.
970 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
971 kes Fix regress config non-portable test as pointed out by
972 Florian Heigl <florian.heigl@gmail.com>
973 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
974 as pointed out by Florian Heigl <florian.heigl@gmail.com>
976 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
977 Reported by Frank Sweetser.
981 kes Fix client-only build.
982 kes Integrate client-only fixes for bsys (initgroups) and conio from
983 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
984 kes Make arguments to get_scratch_volume() in same order as other
986 kes Rework the prune_volumes() subroutine so that after purging and
987 no volume found in desired pool, it will check for a scratch
988 volume. This prevents recycling the whole scratch pool.
989 kes Add code to status storage to print boffset_t (largefile support).
991 kes Move qwt (Graphics libarary for Qt4) to depkgs.
992 kes You now need a --with-qwt=<dir> to be able to build bat.
993 kes Update src/win32/cats/bacula_cats.def to include the new
994 db_get_query_dbids() call on Win32.
996 kes Correct a problem when selecting a scratch volume and moving
997 it to another pool that lost some columns.
998 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
999 kes Enhance Autochanger error messages to include Volume and device name.
1000 kes Rework prune_volumes() code to take account of InChanger flag,
1001 and to handle recycling volumes going to the Scratch pool and
1002 current pool because the RecyclePool directive.
1003 kes Implement a better and more efficient db_get_query_dbids() to
1004 handle creating and passing back a list of DBIds.
1008 kes Start work on new more efficient DBId subroutine. First use
1009 will be for recycling volume to Scratch inchanger.
1010 kes Increase number of JobIds in pruning from 1000 to 10000.
1011 This to be replaced by above routine.
1012 kes Begin implementation of building Qt4 on Win32.
1013 kes Correct typo in fix I added for bad TLS shutdown.
1014 kes Pull 2.0.3 patches into patches directory.
1015 kes Update Release notes. Include qt-console in line count.
1016 kes Update Projects file.
1018 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1019 bug in migration code where a job that spanned two volumes
1022 kes Implement new BST_DESPOOLING blocked state. Change from locking
1023 during despooling in SD to blocking. This means that other threads
1024 can work with the device structure, in particular the reservations
1025 system while despooling.
1027 kes Fix return in reservation message queue that missed clearing
1028 the jcr lock (implemented 26Jun07 below).
1029 kes Rename a number of dev methods to make locking function names
1031 kes Document locking in lock.c. Move lock structures to new file
1034 kes Move reservations message lock to lock jcr only this
1036 kes Move main SD locking code into lock.c (new file).
1037 kes Update Win32 build to include lock.c
1041 kes Dirk committed the qwt library code for drawing graphs in bat.
1042 kes Tweak install of qwt so that it is integrated with ./configure.
1044 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1045 out by Eric (my typo).
1046 ebl Fix configure.in to get batch mode enable
1047 kes Return correct string from authenticate.cpp in bat when connecting
1049 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1050 spurious line drops when using TLS.
1051 kes Do not file reparse points when restoring a file that already
1054 kes Implement Windows reparse points -- similar to directories, but
1055 we do not descend into it. This is a first cut. They seem to
1056 be backed up, but restore is not yet tested.
1057 kes Remove restore_blocking in tls code when shutting a socket to leave
1058 it in blocking mode. Hopefully this will fix the encryption bug
1059 reported by Frank Sweetser.
1060 kes When opening a file for backup, tell the OS that we are going to
1061 read it sequentially -- optimization.
1062 kes Change variable names in authenticate_director() to not conflict
1063 with member names in bat. Caused great confusion with compiler,
1066 kes Queue openssl error messages in case of comm problem.
1067 kes Do shutdown() call if socket terminated.
1068 kes Remove some duplicated code in tls.c
1069 kes Move more of the bsock member variables into private and access
1071 kes Add Frank Sweetser's tls-test to the regression suite.
1073 kes Add Swedish sv.po file
1075 kes Don't print clock skew message in FD if less than 3 seconds diff.
1076 kes Add a bit of VSS info to status client.
1077 kes Implement a first cut of Vista VSS, using Win2003 code.
1079 Release: 2.1.20 beta
1081 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1082 loaded tape but uses first drive).
1083 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1084 This was indeed a Win32 issue.
1086 kes Simplify search of autochanger for in-use Volume.
1087 kes Fix exit condition of check for in-use volume. kes Remove
1088 inappropriate my_postgresql_free_result() in db_close()
1090 kes Fix bad return in FD when encryption signature not found.
1091 Probably caused a crash.
1092 kes Inhibit missing encryption signature error messages for
1093 file types where no signature computed.
1094 kes Correct inverted check on autochanger in reservation system.
1095 kes Tweak debug code in autochanger reservation.
1097 kes Add some additional locking in the cats directory in subroutines
1098 that modify packet variables called from batch insert.
1099 kes Rework how dcrs are allocated. new_dcr() can now be called
1100 with an existing pointer, and it will simply clean it up.
1101 This allows the reservation system to test various different
1102 devices, and will permit easy device changes.
1103 kes A bunch of changes all over to handle new new_dcr() calling
1105 kes Work more on the Volume management in the SD. Remember Volumes
1106 for tape drives and for autochangers (even virtual disk changers).
1107 kes When looking at the Volume list to reserve a drive, handle
1108 autochanger names correctly by interating through the changer
1109 devices. Also call the Director to see if a Volume is suitable
1110 for the current job.
1111 kes Fix some bugs in bscan. Make sure all media records are written.
1112 Make sure that valid JobMedia records are written for disk files.
1113 Previously they were completely wrong.
1114 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1115 that the URLs don't change and so that the developers will all
1116 work off the same copy. Rebuild from scrach.
1117 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1119 Release: 2.1.18 beta
1121 kes Fix seg fault in FD from incorrect digest size.
1122 kes Fix argument to non-OpenSSL crypto.c subroutine.
1124 Release: 2.1.16 beta
1126 kes Remove a few malloc()s from the encryption code.
1127 kes Use the class calls to bsock in filed/backup.c and restore.c in
1128 place of the old bnet_xxx code.
1129 kes Implement code that does an on the fly calculation of the
1130 signing digest during restore of encrypted files. It makes
1131 a best guess at the algorithm, and if it is not correct, will
1132 then revert to the old code which reads the file after it is
1134 kes Implement at least one missing crypto stream in stream_to_ascii()
1135 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1136 #877 where a reload with bad syntax causes Dir to exit.
1138 Cut: 2.1.14 beta (not released)
1140 kes Do not free a volume on a tape drive until another volume is
1141 mounted and read, or the autochanger unloads the volume.
1142 This should help the SD re-use volumes that are already mounted,
1143 and should fix bug #886.
1144 kes Apply patch from user brettedgar that allows gnome2-console include
1145 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1146 kes Apply patch from Lucien Weller that fixes day of week calculation
1147 because of DST flag problem. Fixes bug #887.
1149 kes Move find_next_appendable_volume() to after acquiring a valid device
1150 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1152 kes Unable to reproduce bug 872. However added additional testing for
1154 kes Bug #874 resolved by documenting SQLite limitations.
1155 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1156 kes Bug #881 resolved by removing typo in mtx-changer script.
1157 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1158 approval. Added a link to the wiki on the web page, and implemented
1159 a backup from http://paramount.ind.wpi.edu
1161 kes Fix update allfrompool to pass pool name.
1163 kes Convert to pure GPL v2 license.
1164 kes Fix sscanf problems reported by Peter Buschman that caused
1165 a bus error on Solaris.
1166 kes Rework (simplify) the select prompt in bat.
1167 kes Move get_jobid_from_tid() into lib and create a
1169 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1170 should definitely fix the problem of lost error messages in the
1172 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1173 kes Eliminate tcpd.h from the project. Enclose the #include from the
1174 library with extern C ...
1175 kes Add print of signal name when a signal is trapped.
1177 Release: 2.1.12 beta
1179 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1181 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1182 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1183 makes SQLit3 run 30 times faster, though a bit less safe.
1184 kes Implement --with-batch-insert in configure and detection of thread
1185 safe libraries. It is on by default, but turned off if no thread
1186 safe library (e.g. SQLite 2) is available.
1188 kes Fix Bacula PostgreSQL buffer overruns.
1189 kes Do better checking for NULL results returned from PostgreSQL;
1190 implement retry for failed queries; clear results buffer after
1191 failed query. Hopefully this will correct the PostgreSQL failures.
1193 kes Implement algorithm to handle only one appendable volume with
1194 Prefer Mounted Volumes = no.
1195 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1196 returned from a query.
1197 kes Make volume lock recursive.
1198 kes Implement an additional volume reservation algorithm that
1199 starts by considering all reserved volumes then uses the
1200 old brute force algorithm of searching the resources to
1201 find a suitable device.
1202 kes Add new reservations debug code and refine the old code.
1203 kes Update the win32/dll/bacula.defs file.
1205 kes Tweak reservations algorithm to permit a few more cases, i.e.
1206 volume reserved, but on different drive, ...
1207 kes Enhance SD status to include Pool and Media Type for drive in a
1208 more readable format (a bit longer).
1209 kes Fix PostgreSQL double free.
1211 kes Minor refactoring of restore decryption code.
1212 kes Add code to smartall.c to detect double free of a buffer.
1214 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1215 so that bsmtp will create a correct email address (mailbox only).
1216 kes Modify 'memory' command so that the buffers are listed as 'In use'
1217 to avoid confusion with Orphaned buffers.
1218 kes I reworked the OpenSSL include/lib flags to be handled in
1219 the standard Bacula way, which should fix bug #863 concerning
1220 non-standard OpenSSL libraries.
1222 kes Implement Help Browser window for bat.
1223 kes Fix reload bug that reset StorageId to zero.
1225 kes Fix TLS #ifdefing when TLS turned off.
1226 kes Ensure that when labelling a tape with Slot=0 that InChanger
1228 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1230 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1231 add DISTINCT (required by PostgreSQL).
1232 kes Implement BSOCK authenticate_director() method. Eventually will
1233 authenicate all daemons.
1234 kes Move several more functions into the BSOCK class.
1236 kes Add code to tell the OS that we no longer need a cached
1237 file that we were reading. In findlib/bfile.c. Also,
1238 only cache files that we are reading. Thanks to
1239 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1240 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1241 kes Implement script to automatically generate cats and dll .def
1242 files for Win32 dll.
1243 kes Update README.mingw32 to include new .def file generation.
1244 kes Correct typo in UTF-8 error message as reported by:
1245 jhernandez <julianhernandez@gmail.com>
1246 kes Add additional sm_check() code on debug level 1.
1247 kes Set default debug level to 1.
1248 kes Trap SIGABRT in attempt to get traceback.
1250 kes Reduce bat connect timeout from 30 to 15 seconds.
1251 kes More restructuring and implementing BSOCK class in place of
1253 kes Remove a few unnecessary malloc() tests in crypto code.
1254 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1255 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1256 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1258 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1260 kes Fix Verify InitCatalog. The attributes were not pointing to the
1261 correct saved location.
1262 kes Implement message callback so that GUI is sure to get all
1263 daemon messages. Currently displayed in a dialog in bat.
1264 kes Ignore SIGUSR2 (Bacula timer) in bat.
1265 kes Apply regress patch from bug #859 to allow regress to work
1266 with Solaris compiler.
1268 kes Begin adding TLS support to bat.
1269 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1270 clean up lex.c and make it more readable.
1272 kes Move more bnet functions into the BSOCK class.
1273 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1274 kes Complete change of berrno strerror() method to bstrerror()
1276 Release: 2.1.10 beta
1278 kes Cleanup incorrect email addresses in bsmtp.
1279 kes Make bat display initial messages rather than discard them.
1281 kes First cut of adding .mod to the run command.
1282 kes Implement auto display of messages in bat.
1283 kes Enhanced preferences to allow all Bacula output to be
1286 kes Try to make bsmtp date routines more generic.
1287 kes Fixed bug #856 autochanger documentation.
1288 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1289 kes Add new cats entry point so Win32 builds.
1291 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1293 kes Do better checking for the MySQL 64 bit libraries looking for both
1294 .a and .so libraries.
1295 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1296 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1297 kes Require the thread safe version of MySQL during configure. Thanks
1298 to Andre Noll for pointing this out.
1299 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1300 continuing in migration code.
1301 kes Apply implementation of tray-monitor font derived from gnome-console
1302 submitted by Andreas Piesk <a.piesk@gmx.net>
1304 kes Eliminate important memory loss in SQLite
1305 kes Fixed the batch insert MySQL thread specific data that was not
1306 being freed. See cats/mysql.c:db_thread_cleanup().
1307 kes Fix restore before command.
1308 kes Convert old hdr.name to name() in a few places.
1309 kes Implement update jobid command.
1310 kes Return all time_t dates in db_get_job_record()
1311 kes Stop watchdog in SD earlier.
1312 kes Put Pool just after Storage in please mount message.
1313 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1316 kes Update the po files.
1317 kes Fix Verify InitCatalog by making it cache attributes.
1319 kes Change name bacula-bat to bat for man 1 page to correspond to
1321 kes Check for client and store NULL pointers in status command. This
1323 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1324 kes Fix sign extended editing of %p.
1325 kes Clean out a little old #ifdefing in cats/mysql.c
1327 kes If time diff between DIR and FD is more than 600 seconds convert
1328 INFO message to WARNING.
1329 kes Implement heap size display in status for all daemons.
1330 kes Attempt to fix MySQL db open memory loss (not successfull).
1331 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1332 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1333 Query. This looks like a MySQL but but by doing extra releases,
1334 the memory goes away. This should fix bug #847.
1336 kes When backup fails, cancel SD before waiting for sd termination.
1337 kes If SD is waiting for FD to connect during cancel, wake up the
1339 kes Fix fsf code so that errno is correctly reported.
1340 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1342 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1343 so that Bacula doesn't later stumble into a seg fault.
1344 kes Use the term Restore Client in the restore Job report.
1345 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1346 the original job's FileSetId.
1347 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1348 spooling in migration jobs. Not yet tested.
1349 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1350 reading conf file from a pipe. However, do it with open_bpipe()
1351 rather than popen. Not yet tested.
1353 kes Fix an ugly bug where the VolCatBytes were getting updated
1355 kes Implement bconsole memory command that prints current memory
1356 usage, plus smartalloc dump.
1357 kes Clarify some error messages in backup, admin, and migrate.
1358 kes Shrink label dialog to smaller size.
1359 kes Invert Cancel OK buttons on restore to be OK Cancel.
1360 kes More strerror() to bstrerror() conversions.
1362 kes Start implementing bstrerror() in place of strerror().
1363 kes Stripping path -- seems to work.
1365 kes Prevent door and port files from being restored (mostly
1367 kes Free an unreleased buffer in compat code.
1368 kes Change console Job name from *Console* to -Console- to eliminate
1369 Win32 filename problems. Put Win32 path separator when creating
1370 Console file. This fixes bug #846.
1371 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1373 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1375 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1376 to force Win32 error message.
1378 kes First cut strip path. The data should be passed to the FD,
1379 but nothing is done with it yet.
1380 kes Enhance the digest and signature routines in the crypto
1381 library to accept a JCR and to use it to print error messages
1382 so that they will go in the Job report rather than the daemon's
1384 kes Simplify some of the verify signature code.
1385 kes Simplify a few of the alternative returns in the signature
1388 ebl Use only POSIX regex instead of GNU regex in breg.c for
1389 File relocation. It fix broken freebsd compilation.
1390 kes Convert all other Dir files to use new ua class message
1392 kes Tentative fix for missing digest signature in bug 807.
1393 kes Correct handle problem in new win32_ftruncate routine.
1394 kes Convert ua_purge.c and ua_update.c to use new ua class
1395 message routines for bat.
1397 kes Correct incorrect installation of LICENSE in Win32 installer.
1398 kes Display LICENSE at the beginning of the Win32 install.
1399 kes Attempt to correct the need for the png files to be installed
1401 kes Reapply my bat.conf install script in qt-console. I think I
1402 editted bat.pro instead of bat.pro.in and it was lost.
1403 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1404 the /var/lock/subsys for subsysdir. Also corrects typos in the
1407 kes First cut update job.
1408 kes Correct configure to include qmake of src/qt-console directory.
1410 kes Make restore job yes/mod/no print in one command so GUI works.
1411 kes First cut implementing backup and restore client.
1412 kes Correct editing in Verify output that caused a seg fault.
1414 kes Insure that bat.conf is not overwritten during installation.
1415 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1416 while I was implementing migration in March 2006 !
1418 ebl Cleanup file relocation, using char *RegexWhere instead of
1419 char *where + bool where_use_regexp
1420 kes Update some manpages and add bat manpage.
1421 kes Make a first cut at converting bacula.spec.in for bwx-console
1423 kes Apply patch from John Goerzen to add hostname as fourth argument
1424 to make_catalog_backup script.
1425 kes Fix typos I introduced into bsmtp.c
1426 kes Make pm_strxxx() routines handle input of NULL pointer. This
1427 is to protect from NULL pointers returned from SQL databases.
1428 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1429 kes Add more debug to FIFO code -- fix fifo regression test.
1431 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1432 kes Add thread timer to bnet_connect() to break from OS if wait time
1435 kes Update Win32 build to include new files, new symbols, and
1437 kes Implement socket level heartbeat (tcp_keepidle)
1438 ebl Commit File relocation patch
1439 kes Make bat have 'make install' target.
1440 kes Warn during install if old gnome-console binary found.
1441 kes Warn during install if old wx-console binary found.
1442 kes Add -8 option to bsmtp command line to add content type utf-8.
1443 Fixes bug #809. (Character coding problem in bsmtp).
1444 kes If < is found in target (from, to, cc) then do not enclose the
1445 target in < > in bsmtp. Fixes bug #772 (malformed address).
1446 kes When printing certain items in dbcheck, stop after 300000.
1447 Fixes bug #822. (dbcheck loops).
1448 kes Incorrect status in Dir after waiting for mount with poll set.
1451 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1453 kes Print waiting to reserve a device every 5 mins.
1455 kes Don't call close_part in label.c if tape and relabel.
1456 kes Don't free volume if busy in close() -- should help with
1458 ebl Fix #824 RunScript bug (After script could be execute twice)
1459 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1460 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1461 Add a regression script to test RunScript
1463 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1466 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1467 deprecated. No additional bugs will be fixed, and they will be dropped
1468 in a future release (probably 2.4.0).
1469 kes Change name of wx-console to bwx-console to make it more Bacula
1471 kes Change the name of gnome-console to bgnome-console to make it
1474 kes Some time in March, a Feature Request with patch from Jorj Bauer
1475 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1477 The ability for the director to validate a Client (FD) CN against
1478 an arbitrary set of patterns rather than the hostname, with
1479 A new 'TLS Allowed CN' set of directives which are implemented
1480 in the Client resource. Then pattern matching is used in place
1481 of hostname matching against the Certificate's CN. As an example, we
1482 have certificates which (a) use a local CA, and (b) have a CN of the
1484 kes Add new/changed entry points to Win32 build
1485 kes Create unaccepted-projects for projects that are not accepted.
1486 kes Simplify locking in the reservations system.
1487 kes Add more debug code in reservations.
1488 kes Make sure error condition on reserving a volume is handled correctly.
1489 kes Correct handling of volume_in_use.
1490 kes Correct handling of initializing a device.
1491 kes Move handling of broadcasting releasing a device into release_device().
1492 kes Correct attaching dcr to dev so that it is only done if device
1493 is properly initiated.
1495 kes Locking debug level tweaks in SD.
1496 kes Tweak new Volume code.
1498 kes Add exec external-command [wait-seconds] to bconsole. This
1499 executes the external-command. Note! normally external-command
1500 should be enclosed in double quotes.
1501 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1502 it should normally be off in a production system.
1504 kes Implement die command for SD so that we can force it to dump.
1505 kes Implement SD lock debug code.
1506 kes Implement new algorithm for keeping Volume list in SD. It
1507 is now owned by the device.
1509 kes Implement new code for freeing in use volumes that should
1510 resolve if not all, some of the problems of multiple drive
1511 tape conflicts described in bug 801.
1513 kes Fix gui/bacula-web/images files in svn.
1514 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1516 ebl Fix a bug in batch mode (in string escape)
1517 kes Correct migration prune SQL typo that crept in in a
1518 recent 2.1.x change.
1520 kes Move bnet_despool() into class in bsock.c
1521 kes Modify job report to include director name and Build OS.
1522 kes Move drop root privilege and check_catalog() before fork.
1523 kes Add update database scripts (version 9 to 10) to updatedb directory.
1525 ebl Check size and age of each file after its backup to see if
1526 it has changed during backup, if 'checkfilechanges' is set.
1527 The FD will do an extra check (stat(2)) after
1528 each file backup. mtime, ctime and size are compared with
1529 'before backup' information. If time or size mismatch, an
1530 error message will be generated. You must upgrade FD to use it.
1532 kes Make database name and user configurable
1533 --with-db-name=xxx --with-db-user=xxx
1534 kes Add back database type to message.c for debugging.
1536 kes Implement dir_sql() which issues an SQL query.
1537 kes Modify bat medialist to use dir_sql() and do some minor C++
1538 formatting as well as eliminating a number of pointers, simplifing
1541 kes Fix some of the mtx-changer grep commands for tape label readers.
1542 kes Convert a number of bsendmsg into the appropriate send/warning/error
1543 message class calls.
1544 kes Suppress the using database message in the .sql command.
1545 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1547 kes Add context menu for floating a window.
1548 kes Some minor cleanup and name changes in qt-console
1549 kes Add doing mt setblk 0 in Win32 mtx-changer.
1550 kes Apply Martin's bug fix to move definition of ENODATA for
1552 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1553 sqlite2 and sqlite3.
1555 kes More pruning cleanup.
1556 kes Turn on wait_for_drive by default in mtx-changer.
1557 kes Turn on Batch insert code by default as it now passes regression.
1558 kes Add ./configure --enable-bat to enable building of Bat.
1559 No install yet though.
1561 kes Implement a new .sql command for bat.
1562 kes Implement code to turn off pruning in obtaining the next volume.
1563 Pruning is turned off for the status dir command, but turned on
1564 for SD requests and for the list nextvolume command.
1566 kes Correct Qmsg() that was not updated correctly when committing a
1567 previous change (probably the recent TLS patch).
1569 kes Write new subroutine is_volume_purged() that explicitly checks
1570 if the Volume is purged, and if so marks it as such. This should
1571 resolve problems reported about needing to mount twice to recycle
1573 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1574 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1575 amount of duplicated code.
1576 kes Do volume pruning only for the Media Type desired (reduces pruning time
1577 if multiple Media Types are in the same pool).
1578 kes Implement more detailed info in the Job report for the Bacula version
1580 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1582 ebl Add bbatch tool to bench database and insert mode.
1583 Fix sql quote stuff in batch mode
1584 Fix sql stuff for mysql
1586 kes Correct problems with am/pm scheduling. Fixes bug #808.
1587 kes Implement new prunning code that prunes up to 1000 jobs at
1588 the same time. The same technique can be applied to a number
1589 of other prune/purge subroutines.
1590 kes Add an insanity check when starting a new tape job to ensure
1591 that the tape position has not been changed. If so fail the
1593 kes Fix Win32 build for dlls to add the folllowing:
1594 src/lib/bsock.c -- new file with new entry points
1595 src/lib/dlist.c -- new entry points
1596 src/cats/sql_create.c -- new entry point
1597 src/cats/sql_cmds.c -- new DATA item exported
1599 ebl batch mode cleanup bscan-test is ok now.
1600 kes Implement SD code to check length of disk volume before appending.
1602 kes Correct return status on db_batch... routines.
1603 kes Add call to db_write_batch_file_records() to migration code.
1604 ebl Fix AfterJob timing
1605 kes Move the checking of the database in initializion of the Director
1606 to after we drop privileges. This avoids the need for both root
1607 and bacula access to the DB.
1608 kes Correct a misplaced variable definition in src/filed/backup.c
1609 kes Correct how the new batch insert db_create_attributes_record()
1610 uses the arguments. Caused a seg fault in bscan.
1611 kes Implement lock() and unlock() methods in DEVICE class.
1612 Implement block() and set_block(xx) methods in DEVICE class.
1613 kes Modify bnet_connect() so that it uses time() to check for the
1614 wait time expiring (on some OSes, some system calls may not
1615 return immediately).
1616 kes Modify Verify to obtain the previous JobId when it is actually
1617 running rather than at schedule time (as it was in 1.38.x).
1618 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1620 kes When checking pid in pid file, continue running if the pid is
1621 the same as ours. This occurs on IRIX after a system crash.
1624 kes Extend new GUI API.
1625 kes Make the ua structure a class, and implement send_msg(),
1626 error_msg(), warning_msg(), and info_msg().
1628 kes Apply fix from for building wx-console on the Mac from
1630 kes Implement new select mechanism for GUI programs.
1631 kes Reorganize initialization of stackedWidgets in bat.
1633 kes Add updated nagios plugin supplied by Christian Masopust.
1635 kes More bat implementation.
1636 kes File migrate bug with Pool Occupancy using mediaid instead
1637 of jobids. Fixes bug #795.
1638 kes Fix orphaned buffers in filed backup and verify due to
1639 crypto buffers not freed during errors. Fixes bug #789.
1640 kes Extend new GUI api code to tree commands.
1641 kes Ensure that tree and dot commands check console ACLs.
1642 kes Permit marking directory with trailing slash.
1643 kes Allow 20 console connections (instead of only 10).
1645 kes Add smartctl call to bacula-sd.conf as an example of getting
1648 kes Modify jobq.c to let simultaneous restore jobs run. This may
1649 cause them to fail if they cannot get a drive.
1650 kes Add Client Connect Wait to Storage daemon to permit users to
1651 modify the time the SD waits for a FD connection.
1653 kes Correct virtual changer check which was backwards. This caused
1654 volumes to be unloaded into slots already occupied.
1656 kes Apply Command ACL filter to JobId list in restore command.
1657 kes Correct typeo in var.c patch.
1659 kes Don't let Bacula prune File or Job records for the current Job.
1660 kes Fix variable substitution pad + inc bug reported (with patch)
1663 kes Correct SQLite log table index as reported by Luca Berra.
1665 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1667 kes Begin implementing new comm signals for API.
1668 kes Fix a few places in lib/message.c where the open fd may
1670 kes Continue implementing lib/bsock.c (real class). Make jcr,
1671 who, host, and port private. There are new methods to access
1672 them for non-class use. This required touching a number of files.
1674 kes Add LANG=C to autoconf/randpass so it works with languages other
1675 than English. Fixes bug #788.
1677 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1679 You will not be able to generate Include/Exclude list any more.
1680 It will be fixed soon.
1681 If you want to use this, you can apply
1682 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1684 kes Restore of sockets created false error messages because Bacula
1685 no longer restores sockets, but the code was still trying to
1686 set the attributes on a non-existent file. Reported by a user.
1687 ebl finish RecyclePool feature
1688 Media will takes Pool.RecyclePool
1689 when moving from Scratch to a Pool or when user will do
1690 update volume=xxx frompool
1691 To use it, add RecyclePool = aPool to your Pool resource
1694 RecyclePool = Scratch
1698 kes Expand new BSOCK class adding signal() and new BNET signals.
1699 kes Begin enhancing the dot commands adding a new API function
1700 that returns more information and will make it easier
1701 to interface to the Director from a program.
1703 kes Make DEVICE fd private. Its new name is m_fd, and can be
1704 obtained with dev->fd() outside the class. This is the
1705 first of many DEVICE members to be made private.
1706 kes Implement Michael Renner's idea on having a virtual disk
1707 changer. I made some minor modifications (e.g. I did not
1708 implement the Virtual Changer directive, but simply set
1709 the Changer Command to an empty string.
1711 kes Implement a BSOCK send() method that writes the whole record
1712 in a single write() request rather than in two.
1713 ebl add update volume=xxx recyclepool=yyyy
1714 volume takes recyclepool from pool when using update volume=xxx from pool
1716 kes Fix encryption deblocking bug, which caused some restored files
1717 to be truncated. This fixes bug #763.
1718 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1719 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1721 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1722 ebl Use btime_t instead of uint64_t in media patch.
1724 kes Optimize the use of the database a bit in the Status dir command.
1725 Only open it when needed, ensure that if any previous database
1726 was opened, it is closed.
1728 kes Correct VolCatBytes bug from media patch.
1729 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1730 in the case of orphaned records.
1731 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1732 and File records in 300K chunks to be more efficient. This
1733 idea came from Juan Luis Frances (if I remember right).
1734 kes Apply Eric's scratch patch that moves a purged Volume to
1735 the RecyclePool. Question: how is RecyclePool set? what
1736 happens to the ScratchPool?
1737 kes Apply Eric's media patch that collects read/write media
1738 times as well as byte counts. This patch requires a
1739 simultaneous upgrade of the DIR and SD. Note, there
1740 should be some way to turn off timing. I'm not sure
1741 times are in Bacula units.
1742 kes Apply Eric's batch-insert patch.
1744 kes Update projects list.
1746 kes Implement Include/Exclude file lists in FD as dlists using
1747 the new dlistString class. This permits efficiently having
1748 large include/exclude lists and completes project Item 25.
1749 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1750 console is authorized to cancel the job. This fixes bug
1752 kes Modify SD so that the VolCatJobs medium record is updated
1753 at the beginning of a Job rather than the end. This
1754 fixes bug #775 where exceeding MaxVolJobs caused jobs
1756 kes Added a mutex around getting and setting Volume information
1757 so that multiple simultaneous jobs will single thread.
1759 Switch to using Subversion
1760 kes Remove src/pygtk-console/ from configure
1762 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1763 plus the entrypoints.
1764 kes Apply patch supplied that corrects debug print
1765 in canceling jobs for max run time. Supplied as
1766 part of bug #621, which was previously fixed.
1768 kes Test on job_canceled() and sd_msg_thread_done inside
1769 loop starting the message thread to avoid a race condition.
1771 kes Remove rl_catch_signal from console.c as it conflicted
1772 with the header definition. Fixes bug #765.
1773 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1775 kes Clarify some stored/acquire messages to indicate if the
1776 problem is with read or append.
1778 kes Fix memory leak with storage ids in cats/sql_get.c
1779 kes Terminate watchdog earlier to avoid reference to released
1780 memory -- reported by Jason Austin.
1781 kes Move closing the database from jobq.c to the director daemon
1782 termination routine. This fixes memory leaks for shadow jobs
1783 (i.e. migration jobs).
1784 kes Free up the unique jobid chain items in migrate.c. This fixes
1785 a memory leak problem.
1786 kes Convert some ugly looking for statements to use foreach_alist
1787 in findlib/find.c. This will facilitate converting the structures
1788 to use dlist (for large include/exclude lists).
1789 kes Fix a bug in the btree.c and btree.h routines, then rename them
1790 rblist and add them to be built in src/lib. Include some new
1791 methods written by Rudolf Cejka that make the code more readable
1792 (hides some of the ugly casting).
1793 kes Add set_next() and set_prev() methods which make the code much more
1794 readable. Also add a new dlistString class that facilitates storing
1795 strings in dlists. To be used in the large include/exclude lists.
1796 kes Make some trivial modifications to lib/tree.h that use rblist
1797 rather than dlist for storing the tree links. This was suggested
1798 by Rudolf Cejka. The result of this is that the restore tree now
1799 uses red-black binary trees rather than simple linked lists. This
1800 should give rather dramatic speed improvements for directories
1801 contining large numbers of directories/files (more than 10000).
1803 kes Fix maxruntime bug #621.
1805 ebl Implement the include JobID in spool file name project.
1806 kes Reorder projects file in order determined by Jan 2007 vote.
1807 kes Implement item #12 on project list -- quick release of FD by
1809 kes Fix open of SQLite3 db where user does not have write permission
1810 so that DIR does not crash. Fixes bug #761.
1812 kes Add back missing @ in Win32 Makefile.
1813 kes Change 'Device not configured to autolabel' from INFO
1815 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1816 which should restart an indefinite # of times.
1817 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1818 other DIR specifications.
1820 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1821 Fix path quoting in SQLite scripts.
1822 Fix problems with SHGetFolderPath.
1824 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1826 kes Fix Job restart on error bug that promotes an Inc to a Full
1827 backup. This should fix bug #755.
1828 kes Add qt-console and first cut of code.
1832 kes Fix Bacula->Documentation link on Win32 to point to index.html
1833 instead of bacula.html. Fixed bug #750.
1834 kes Return JobId in db_get_job_record() when JobId==0. This should
1836 kes Do not release source pointers when restarting a failed job.
1838 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1839 This *should* fix bug #747.
1840 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1843 kes Modify USTORE constructor to set an empty store_source string,
1844 and don't copy the store_source string in a cancel. Hopefully
1845 this will fix Arno's seg fault, bug #744.
1846 kes Add back code to disable conio in configure. Fixes bug #743.
1847 kes Correct the Options scanner in the FD to correctly handle
1848 SHA1 option, which was eating the next option. Reported by
1850 kes Add code to indicate when the SD is spooling, spool wait, and
1851 despooling as requested by Alan Brown.
1853 Version 2.0.0 released: 4 January 2007