1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Add statistics prunning with option and menu
29 kes Separate unload_dev() from unload_other_device() in autochanger.c
31 kes Apply patch from bug #1069 that corrects spurious error messages
32 when ACLs enabled on SGI but no ACL exists.
33 ebl Fix small segfault in bacula-sd when debug level is 500
34 kes Modify run_program() and run_program_full_output() to use
35 call by reference for the results string. This corrects a long
36 standing problem where the address of the string may be changed
37 in the subroutine but not in the calling program.
39 kes Re-enable code to remember last volume mounted on a non-tape
41 kes Add patch supplied in bug #1068 that fixes a SD crash when using
42 a Virtual autochanger.
43 kes Generate correct JobMedia records during spooling/despooling when
44 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
45 <tih@hamartun.priv.no> for excellent analysis and testing.
47 kes Tweak hash algorithm for htable using Martin Simmons idea
48 for doing a circular shift.
49 kes Remember what volume is in VTLs (previously turned off for
51 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
52 pointed out some problems in creating JobMedia records during
53 spooling with concurrent jobs. Fix the problem by updating the
54 start file position before despooling and generate a jobmedia
55 record at the end of despooling.
57 kes Fix handling of JobMedia records during spooling and when a
58 Volume is changed without actually writing data to the Volume.
60 kes Rework certain SD locking based on gdb tracebacks of deadlocks
61 sent by Eric. This code now uses only the volume_lock() rather
62 than the reservations lock when at EOM and acquiring a new
64 kes Ensure only one exit point in several subroutines.
66 kes Implement bsock code to permit locking. Use the new code in Verify
67 in the FD to prevent the heartbeat thread from disrupting the Verify
69 kes Modify SD locking to eliminate locking the reservations system from
70 outside the system. Use the volume lock when getting media data
71 and reserving a new volume at end of media.
72 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
73 when SD starts are not locked into place.
75 kes Fix error compiling runscript code on 64 bit machines.
76 kes Tweak Win32 mount point code.
77 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
78 cleared giving bad file estimate).
79 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
82 kes Keep Schedule run lists in order as suggested by
85 kes Implement autostart scripts for Debian.
86 ebl Implement upgrade catalog scripts.
88 ebl Apply jobstat patch for long term statistics. Have to implement
89 purge stats command and upgrade scripts.
90 kes Fix mtx-changer.in for broken Debian mt program.
92 kes Fix large number of JobMedia records reported by Eric Bollengier.
94 kes Apply doc fix from bug #1062.
95 kes Resolve crash and improper restore wx-console Win32 restore
97 kes Update Win32 wxWidgets to latest version.
98 kes Attempt to do correct handling of Win32 mount points. Should
100 kes Fix Win32 FD backup/restore memory leak due to improper termination
101 of BackupRead/Write. This fixes bug# 1038.
103 ebl Reduce memory usage for accurate backup, working only with ctime
104 and mtime. (not all Lstat field)
105 About 40MB for my linux system (400.000 files)
107 kes Add dcr->reserved_volume flag that allows us to release a volume
108 even if it is not vol->released. This allows maxvol2 to work when
109 Volumes expire and we are already writing to the device (i.e. a
110 volume is pulled out from under us by another job terminating after
111 we reserve the drive).
113 ebl Permit multiple command/console per runscript definition.
114 RunScript { command = /bin/true ; command = /bin/false ... }
115 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
116 (restart an application) just after the VSS snapshot on windows.
117 kes Don't zap dcr values during release_volume() as they might
118 have the next Volume to be mounted.
119 kes Fix AIX prototype.
121 kes Second cut of drive switching during backup.
124 kes Update Win32 version of wxWidgets to most recent version.
125 kes Tweak Copy job details.
126 kes Rework dir_find_next_appendable_volume to make a bit more effort
127 to find a suitable volume before giving up.
129 kes Make ask_sysop_to_create... to return if waken from wait.
130 This helps get out of blocked conditions.
131 kes Experimental implementation of switch_device in reservations.
132 kes Implement FD version to allow easier protocol changes.
133 kes Add Plugin Options string -- not yet passed to FD.
134 kes Implement PluginOptions ACL.
136 kes Attempt to correct problems with restores with autochangers and
137 use counts going negative
138 kes Rework SD status command and implement API for bat. Implements
139 header, runing waitreservation, devices, volumes, spooling,
140 and terminated status keywords.
141 .status storage=xxx <keyword>
142 kes Clarify TLS error message by adding double quotes around name.
143 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
144 kes Pass jcr to tls routines so debug messages can be handled better.
145 kes Rework jobq resource allocation code, and possibly fix a bug
146 that caused reference counts to get out of sync.
148 kes Rename fd/dir plugin to use Bacula standard underscore.
149 kes Plugin work -- bring dir up to fd level.
150 kes Start implementation of VTL code
151 kes Fix Win32 build after adding new cats subroutine.
153 kes First cut at Duplicate Job implementation.
155 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
156 kes Start PluginOptions string, and refactor a bit of ua_run.c
157 ebl Apply Allan patch that permit to reset recyclepool.
159 kes Test patch -- possible fix or improvement for bug #1053
160 kes Refactor FD and SD status commands to permit new API code in
161 SD, and to fix Win32 build.
162 kes Win32 build is now working.
164 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
165 some ideas in patch from Scott Bailey.
166 kes Begin implementation of duplicate Job control.
167 kes Fix some of Win32 build after recent additions.
168 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
169 which causes the FD to detect whether or not the OS has the
170 honor no dump bit (*BSD systems), and if so, to skip backing up
171 any file with this bit set. The feature is enabled by setting
172 'honor no dump flag = yes' in the Options section of a FileSet.
174 kes Correct po warning message with datarootdir
175 kes Implement more code in dird.c to put configuration parsing in
176 a class rather than use globals.
177 kes Restructure SD status command for implementation of bat API
180 kes Suppress incorrect 'Will not descend from x into y' messages.
181 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
182 daemon globals used by parser.
183 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
185 kes Fix free of plugin_list when none exists.
187 ebl Apply accurate project patch.
189 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
190 on non-mempool object)
191 kes First cut of converting FD .status to work with bat API.
193 .status client=XXX header
194 .status client=XXX running
195 .status client=XXX terminated
196 kes Implement first cut of Copy Job.
197 kes Implement Catalog in Pool resource. It overrides catalog specified
198 in the Client resource.
200 kes Apply patch (with some difficulties) from Joao Henrique Freitas
201 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
203 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
204 ftruncate() actually works. In the case of some (cheap) NAS devices,
205 it does not, and so recycling NAS Volumes does not work. The code
206 simply unlink()s the file, then recreates it. This fixes bug #1011.
208 kes First incomplete cut of big malloc blocks for htable.
209 kes Tweak plugin code.
211 kes Plugin debug code + tweak a couple bat dialog layouts
213 kes Fix creating first JobMedia record during Migration to include
214 proper index. This caused slow restores of migrated jobs.
215 kes Temp fix to plugin name file_index.
216 kes Bacula backed up and restored a MySQL database.
218 kes Implement plugin restore.
219 kes Implement parsing of db_driver to give db_type index.
221 kes First cut of plugin restore code.
222 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
223 and do not strip paths on symbolic links.
224 kes Set catalog backup database and user name from values specified on
225 the ./configure line.
226 ebl Fix #1031 about wrong pool source information in job report.
229 kes Remove a redundant jcr argument to find_files, match_files, and
231 kes Implement '.status dir header|scheduled|running|terminated' that
232 prints the requested status section. With the exception of the
233 header, the other reports have fields separated by tabs (\t).
235 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
236 a resource embedded run command to find a since time if no explicit
237 since time was supplied on the command line.
238 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
239 that updates the state file at job termination time in addition to
240 when the daemon terminates.
242 kes First version where a plugin did a backup.
243 bpipe-fd.so created a backup file, wrote a test
244 string to it, and Bacua could restore this fabricated file.
246 kes Implement DB Driver = string for the DBI driver.
247 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
248 kes First cut of code for loading Win32 plugin dlls. Implement
249 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
250 and implement a dlfcn.h file based on opengroup's definitions of
253 kes First cut plugin directives.
255 kes Apply patch from bug #1049 to prevent stripping the path on a
257 kes Attempt to fix bug #1047 where stripping a path corrupts the
258 heap. Waiting for feedback.
259 kes Correct the Mount message not to suggest labeling a new tape
260 when doing a restore. Submitted by email by John Stoffel.
261 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
262 FD by using casting. Reported in bug #1042.
264 kes A bit of crypto cleanup. More later.
266 Release Version 2.2.8
268 kes Apply patch from Martin to correct bug #1040, bscan sets existing
270 kes Fixed important spelling error in doc -- bug #1045.
272 ebl Fix bextract to be able to extract non-portable Win32 data to
274 kes Move initialization of read/write res lock earlier in the code.
275 This fixes the crash with a null conf file. This fixes bug
277 kes Redefine CURES in lib/parse_conf to be URES and move it all
278 into lib/parse_conf.c -- this responds to bug #1042, but does
279 not fix it. The fix is not to compile with FORTIFY_SOURCE.
280 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
281 the trunk SVN. I don't think this was reported as a bug.
283 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
285 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
287 kes Add DataDespooling and DataCommitting status (committing is
288 the last despooling).
289 kes Finish implementation of new reservations code noted below.
291 kes Fix bsnprintf for float point numbers. I broke recently when
292 parameterizing some variables. This fixes bug #1036.
293 kes Undo recent reservations changes ... will apply them later
294 when they work better.
296 ebl Fixes #1034 which cause mysql to hang the connection after 8h
297 ebl Change default statistics target of filename.name and path.path
298 fields for PostgreSQL. This speeds lookup by indexes. Thanks
300 kes A few more tweaks to new reservation code. Make sure to clear
301 vol released flag when retaking volume. When reading label and
302 label is bad mark volume unused. When recycling, mark volume
303 unused so it can be renamed.
305 kes Fix reserve_volume() so it doesn't release a volume in use
306 (i.e. a volume entry not marked released). This should be
307 the last part needed to fix bug #1018.
309 kes Move Heartbeat documentation from Job to Director resource.
310 This fixes bug #1033.
312 kes Fix existing switch drive SD code to call autochanger to release
313 any old volume. This must be done to keep the autochanger from
314 releasing subsequently newly reserved volumes in doing a close().
315 This should fix bug #1018.
316 kes Fail if attempting to get console input in batch mode. This
317 should help fail RunScript console commands that are incomplete.
318 kes First cut implementing switch_drive() in SD (not actually called).
320 kes Implement first cut running console commands in a RunScript.
322 ebl Fixes bug #1028 where 'Selection Type' option was not usable
324 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
327 Release Version 2.2.7
329 kes Add new free_tls() entry point so that Win32 builds.
330 kes Fix compile warning in src/lib/util.c
331 kes Fix entry point for edit_job_codes() so that Win32 builds.
332 kes Fix seg fault Frank Sweetser reports in regression testing
333 on his systems. The problem was that the original author of
334 bsnprintf.c did not take into account the side effects of
335 using ++x in the argument to a #define.
336 kes Make SD protocol backward compatible with version 2.2.x.
338 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
339 because Bacula no longer restores sockets.
340 ebl Always use ignorecase fileset option on win32 FD.
342 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
343 that implements double quoting include names in conf files,
344 and also allows piping input by having the first character
345 be a vertical bar (|).
346 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
347 that implement %f in RunScripts to pass the FileSet name.
348 kes Skip leading | when lex input comes from a pipe as suggested
349 by Michael Stapelberg <michael@stapelberg.de>.
351 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
352 Nerijus Baliunas <nerijus@users.sourceforge.net>
354 kes Implement Plugin Directory and plugin events.
356 kes Implement a security enhancement: TLS authentication but no
357 encryption. Enabled by setting 'TLS Authentication = yes'.
358 Note when this is on, TLS encryption is turned OFF!
360 kes This patch corrects a problem where the maximum concurrent storage
361 jobs counter gets out of sync during restore jobs causing jobs to
362 'wait on max Storage jobs'. This patch fixes bug #1009.
364 kes This patch fixes bcopy so that it produces correct Volumes.
366 kes This patch eliminates spurious output to the console during a VerifyVolume
367 job that contains encrypted data. It fixes bug #1024.
369 kes This patch prevents the 'status dir' command from trying to use a scratch
370 volume and possibly moving it from one pool to another. This patch fixes
373 kes Add new include to postgresql.c suggested by Marc Cousins so
374 that it compiles correctly with pgre version 8.3.
376 kes Fix --archivedir addition to configure. Replace it with
377 --with-archivedir in configure.in This fixes the regression
379 kes This patch fixes bug #1012 where the job is canceled because
380 of Max Run Time exceeded when the job has not yet started.
382 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
383 one 'part' to write. Instead of each part being stored on disk,
384 written to DVD, then deleted from disk, all parts are written to disk,
385 and only the last is written and deleted from disk.
386 kes This patch fixes the status command to include the formating string for
387 JS_AttrInsterting. It fixes bug #1021.
388 kes This patch should fix the Mac OS X build problem on the latest
389 Darwin, where sys/types.h was not included correctly (apparently
390 due to a change in the Mac headers). The solution was to explicitly
391 ensure that it is defined for the ./configure.
392 This patch also has a rebuild of configure that includes the Debian
393 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
394 kes This patch should ensure that queued messages to the console are
395 displayed as soon as possible. It should fix bug 1007, but has been
396 reported not to work.
398 kes This patch fixes the infinite loop when trying to increase the
399 maximum number of volumes in a Pool during the add command.
400 This patch fixes bug #1008.
402 Release Version 2.2.6
404 db Remove extra data on estimate command in joblist for bat.
406 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
407 really change anything, but is the beginning of doing it *right*.
408 To do it completely right the LastWritten date must be passed to
409 the SD, but it is not yet done.
410 kes Minor tweaks to some bat restore SQL.
411 kes This patch fixes bug #1003 where putting the message output from
412 a Verify job into the catalog results in a recursive loop. The problem
413 seems to show up only with postgresql (to be verified).
414 kes Correct %x to %p in postgresql debug statement.
416 kes Fix bug #942 where lots of emails where generated when the heartbeat
417 interval was low and Bacula wanted a different tape from the one in
420 ebl Add new SD despooling attributes and Dir inserting attributes
421 job status codes in the catalog (Status table).
423 ebl Use qmake-qt4 instead of qmake when available (debian system).
425 kes Add a security warning to src/cats/make_catalog_backup.in indicating
426 that passing the password via the command line (arg 3) is insecure.
427 This responds to bug #990 (it doesn't fix it).
429 kes Set default debug_level to zero. This corrects bugs #991 and #993.
430 kes Fix a crash in bat when it cannot connect to the Director for example
431 if the Director is not running.
432 kes Remove redundant INDEX (JobId) from File table in the trunk.
434 kes Make explicit exception to GPL in LICENSE to permit linking
435 the Win32 FD with Microsoft VSS code.
436 kes Apply the Solaris package patch from
437 Masopust, Christian <christian.masopust@siemens.com>
438 kes Apply the patch to optionally add a timestamp in the debug output
439 submitted by Mariusz Czulada <manieq@wp.eu>.
441 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
442 backend (sql_strerror). Fixes bug #989
444 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
445 It applied with no problems.
446 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
448 kes Redirect stderror to stdin on mt status command in mtx-changer.in
449 since the status is returned on stderr on Solaris.
450 kes Activate Close button on tray-monitor window. This fixes
452 kes Check for NULL item in parse_conf.c before calling it. In the
453 case of Device, there is no item and this caused a seg fault when
454 Device appears in the conf file.
455 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
456 avoids pulling in config.h multiple times in some new code.
458 kes Fix spurious warning message printed when creating a volume with
459 a LabelFormat. This fixes bug #976.
461 Release Version 2.2.5
463 kes Add JobId in place of Job name in all the Jmsg() output.
464 kes Correct the APP_DESC for the Win32 storage service (remove an e).
466 kes Make maxvol-test and new more strict maxvol2-test work.
467 kes Print JobId in all Jmsg() job output.
469 kes Add new SD despooling attributes and Dir inserting attributes
470 job status codes. This fixes bug 961.
471 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
473 kes Fix doc issue. This fixes bug #963.
474 kes Fix listing performance problems in bat. Pointed out by
476 kes Remove old debug code.
477 kes Fix bat code that tests for Win32. This should fix bug #968
478 kes Query 5 list wrong Vol after migration. This fixes bug #960
480 ebl Fix #969 where user can't change Replace option in restore menu.
482 kes Save jcr in thread specific data (tsd) for each thread.
483 kes Make Dmsg() print JobId as -%u.
484 kes Make Jmsg, Emsg, and others automatically pickup the jobid
485 for the thread if it exists.
486 kes Remove old reservation debug jid code.
487 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
488 ebl Add an option that permit to specify spool size in job
489 definition. (Applying patches/testing/spoolsize_per_job.patch).
490 You must upgrade SD and DIR at the same time.
491 dvl Add new configuration item --archivedir
492 dvl Adjust regression tests to use tmp not /tmp. This will allow
493 multiple concurrent runs of the regression tests.
495 kes Fix race condition that drops final block written to volume.
496 This happens in rare cases with multiple simultaneous jobs
497 when the Volume fills. This fixes bug #964. May be related
498 to bug #935 and possibly #903.
499 kes Eliminate more strerror() and replace with bstrerror().
500 kes Remove BSD getopt and replace with unrestricted IBM version.
501 kes Fix Win32 build for changed calling sequences.
502 kes More tweaks to the mount volume routines to get everything
503 right. Changed variable name from find to have_vol, which is
504 much easier to understand.
505 kes Enhance btimer debug code.
507 kes Fix FD->SD authorization failure, which was due to spurious
508 wakeups from a pthread_cond_timedwait(). Simply check the
509 predicate before continuing. This fixes bug #953.
510 kes Add const char where needed (more to do). Remove temp debug code.
512 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
513 kes Don't overwrite error message in check_tables_version.
515 kes Unlock batch insert tables with same calls used elsewhere.
516 kes Allow starting 59 jobs a second.
517 kes Make SD session key more random.
518 kes Add retry for SQLite opening db if it fails. Probably helps
520 kes Suppress extra error messages during batch insert failure.
522 kes Add jcr to timer packets so if killed message can be sent to job.
523 kes Add JobId to all Dmsg() output.
524 kes Put some FD auth code on dbglvl rather than fixed.
525 kes Return insert attributes error message in db msg buffer to avoid
526 false error messages. Helps fix bug #966.
527 kes Separate batch init error messages. Probably helps fix bug #966.
528 kes Make SD code that contructs attribute insert check string lengths
530 kes If Dir gets an error during inserting attributes, cancel SD.
531 This reduces unnecessary error messages.
533 kes Correct search boolean for getting Volume info
534 ebl Cleanup batch insert code. Probably fixes bug #965.
535 kes Back out one small change to the reservation system (reserving a volume).
536 kes Rework how a Volume is mounted. It is now much more intelligent and
537 will always attempt to use any mounted volume if possible and reduces
538 calls to the Director asking about volumes.
540 kes Turn off some code when batch insert not enabled.
541 kes Edit FD name in connect error messages.
542 kes Rework the reservation system to take into account that the Director
543 might give us a Volume that is different from the current one being
544 used, and to ensure that we don't exceed Maximum Volume Jobs.
545 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
546 fatal error with multiple jobs running'
547 kes Add more debug code in reservation system.
548 kes Implement maxvol-test to check bug #947.
550 kes Add code to handle tray monitor separated from Win32 FD.
551 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
553 kes Add missed return in fixing verify bug -- trunk only.
554 ebl Fix a command parser issue causing a director segfault.
555 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
557 kes Increase the max block size to 4MB fixes bug #957.
558 kes ERABT if user sets min block size > max block size. Fixes bug #956.
559 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
560 is not properly mounted (recognized) during a poll.
561 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
562 Job that has differences reports Verify OK.
563 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
565 ebl Add an option to operate on all pools with update vol parameters.
566 This complete the project 20. Patch from Nigel Stepp.
567 ebl Add history support to bconsole when using readline.
568 Using Ctrl-D to exit doesn't update .bconsole_history
569 kes Modify new volume algorithm to use max MediaId for generating next
570 volume number rather than the count of Volumes. This should essentially
571 eliminate the failure rate if some volumes were deleted. Bug #921.
572 kes Begin implemention of Optimize Job Scheduling.
573 kes Implement restore callback that Dirk and I agreed on for bat
574 restore. This fixes bug #928. Restore of backup of zero files fails.
575 kes Fix SQL Catalog logging which broke with new db_escape_string
578 Release Version 2.2.4
580 kes Fix bacula_cats.def for new db_escape_string().
581 kes Increase size of name string when FD making connection to SD.
582 May fix bug #953. FD->SD connection failure.
584 kes Add code to help Dan debug 2drive-incremental-2disk test.
585 kes Add code to try to fix bug #908.
586 kes Add waits to multiple exit detection code to try to force pid
587 file to always be deleted.
588 kes Restore good dev.tar.gz to rescue set appropriate binary property.
590 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
591 trying to switch drives by checking for blocking before unblocking.
593 kes Cancel storage daemon in all cases where FD reports error. This
594 should fix virtually all cases of bug #920.
595 kes Fix db_escape_string() for MySQL which did not compile.
597 kes Fix error message that was clobbered when Dir tells SD it does not
598 have write permission on Volume. This should fix a minor point
599 in bug #942, but not the main problem.
600 kes Add code to cancel job in SD if FD connection fails. This should
602 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
603 dvl Pass jcr and db into db_escape_string() to enable better escaping
605 kes Fix migration code to get correct Volume name with multiple volumes
606 by skipping |. Fixes bug #936.
607 kes Implement patch supplied by Landon to fix bug #944 where using
608 TLS with bconsole uses 99+% of the CPU.
609 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
611 kes Move patches into patches directory.
613 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
616 ebl Using 'm' in bconsole will show messages like before,
617 and not memory usage.
618 kes Fix bug #935, and probably also bug #903 where files were not
619 restored. MediaId was not properly set in JobMedia record after
622 kes Suppress chown and chmod error messages if the FD is not running
625 kes Apply Martin Simmons' patch that should turn off the new API usage
626 when batch insert is turned off allowing building on older
628 kes Add ./configure search in qwt-qt4 for qwt package
630 kes Bacula is now free of 3rd party GPL copyrighted code!
632 kes Add guid_to_name.c/h which replace idcache.
633 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
635 ebl Detect if new PosgreSQL batch insert API is present.
636 kes Correct incorrect mempool call causing Director crash. Occurs on
637 systems without va_copy().
638 sb Update spec files for 2.2.1 release
640 kes Fix memory pool call in ua_output.c. bug #934.
641 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
642 Add test program to fnmatch.c
644 kes Integrate patch to README.vc8 from
645 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
646 edit it to get it into Unix patch format.
647 kes Implement mkpath.c to replace old FSF makepath.c
649 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
651 Release Version 2.2.1
653 kes Update POTFILES.in
654 kes Cleanup a few underquoted AC_DEFUNs in configure
655 kes Apply patch from Martin Simmons that adds a test for va_copy to
658 kes Fix bug #921 by increasing the number of tries to create a new volume
660 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
661 can be called multiple times. Implement a version for machines
662 without va_copy() that gets a big buffer.
664 kes Integrate more portable zone offset code into bsmtp.c
665 Submitted by Attila Fülöp.
667 kes Fix bad SD->FD return status reported by
668 (James Harper) <james.harper@bendigoit.com.au>
669 ebl Fix a bug in read_close_session which return random status
670 thanks to James Harper
672 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
673 and directory names during restore of single file/directories.
674 kes Add sanity checks to .sql command when string is empty. Hopefully
675 that will resolve Dirks Director crash.
677 kes Apply patch submitted by Martin Simmons that corrects a seg fault
678 in the bsmtp chat subroutine when debug is >= 10.
680 kes Fix Director crash when running bat SQL queries.
681 kes Add David's notes on Item 8: Copy pools.
683 kes Rework projects file to be current and ready for a vote.
684 kes Enhance lex scanner error message.
686 kes Tweak LICENSE file to mention BSD code.
687 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
688 if specified on the ./configure.
689 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
690 This class is intended to allow us to open a second bsock to the
691 Director while in the restore subdialog.
693 kes Fix configure to create bat Makefile before creating dependencies.
694 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
695 kes Add a tooltip to the tray monitor.
696 dvl Set the Director's PID file before dropping privs. This fixes
699 kes Update AUTHORs file
700 kes Increase the default max concurrent jobs to 20 in FD and SD to
701 correspond with the default .conf files.
702 kes Rewrite the Win32 service routines. This eliminates the 3 copies
703 some different, of the same file created by RN when porting the
705 kes Rearrange some of the Win32 directories and the placement of the files
707 kes Set DEVELOPER flag in version.h
709 ========================================================================
710 Release Version 2.2.0
712 kes Apply a second doc patch from Marc.
713 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
714 improves the tips section that discusses how to setup multiple
717 kes Update bat README file.
718 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
719 corrects a typo in the Recycle status check in db_find_next_volume().
720 This will probably fix a number of annoying problems with multiple
722 kes Modify most of dird/msgchan.c to use bsock class calls rather than
723 bnet calls -- no functionality change.
725 kes Modify the Verify output to specify if files are missing on
726 the Volume(s) or disk. Fixes confusion in bug #916.
727 kes When more than one Volume is read in a migration job, the last
728 Volume bytes reported are from the last read volume rather than
729 the last written volume. Fixed. This fixes bug #910.
730 kes Fix display of Recycle flag after update volume=foo recycle=yes.
731 It previously printed New Recyle flag is: no. This fixes bug
734 kes Correct seg fault when switching tape drives during restore.
735 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
736 be used until after 2.2.0 release.
738 kes Remove fnmatch() in SD that permitted wild card specifications.
741 kes Fix %g in filename returned by SQL for browse tree reported by
743 kes Fix configure so that it puts config.out in the cwd rather than
745 kes Attempt to fix the locking problem reported by Eric in bug #906.
746 kes Make berrno class to leave errno unchanged after constructor call.
747 kes Make bnet_server use the heap rather than the stack to allocate
748 its socket fd pointers to avoid a crash at termination. Problem
749 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
751 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
752 and putting it in depkgs-qt along with Qt4.3.
754 kes Rework code in acquire.c that switches drives for reading when
755 the Media Type does not match. This should fix bug #906
757 ebl Fix a director segfault during job setup #907
758 kes Correct seg fault in postgresql when first operation returns no
759 rows. Fixes Dirks File browser problem seg fault with bat.
761 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
762 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
765 kes Implement PopUp YES/NO dialog for bat.
767 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
769 kes Correct RunScript to terminate job in FD on failure.
770 kes Change abort_on_error and AbortJobOnError to fail_on_error
771 and FailJobOnError in RunScripts.
772 kes Minor tweaks of code formating in RunScripts, principally to
773 avoid depassing 80 columns.
775 kes Eliminate one #ifdef Win32 in bsmtp
776 kes Implement grow tool to grow a file for testing very large databases.
777 kes Add big-vol-test to test Bacula seeking with > 5GB.
780 kes Modify find_next_volume() to return all values in Media record.
781 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
785 kes Update Release notes
787 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
788 Warning, in previous beta version, all media get from scratch keep their
791 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
792 This should fix bug #842. Made a note to look at removing the temp
793 files at the end of the install.
794 kes Add ability to mount and unmount a file device providing it is
795 marked as being removable and has the appropriate mount and unmount
796 commands defined in the Device resource. This fixes bug #830.
797 kes When applying a storage override, release all previous storage
798 definitions rather than just prepending the new storage.
799 This should prevent a good deal of confusion.
801 kes Implement ./configure search for qwt libraries.
803 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
804 Win32 FD. This should fix bug #893.
805 kes Remove an unnecessary beep in Win32 init code.
806 kes Update copyright dates in Win32 executable about boxes.
807 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
808 code with a BSD getopt.c and getopt.h.
809 kes Remove sched.h from the Win32 compat directory -- not used.
810 kes Remove the Exit menu item from the Win32 tray monitor. If you really
811 need to shut it down, do it through the services panel or the command
813 kes Remove some inappropriate Bacula FSFE copyrights.
814 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
815 kes Fix regress config non-portable test as pointed out by
816 Florian Heigl <florian.heigl@gmail.com>
817 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
818 as pointed out by Florian Heigl <florian.heigl@gmail.com>
820 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
821 Reported by Frank Sweetser.
825 kes Fix client-only build.
826 kes Integrate client-only fixes for bsys (initgroups) and conio from
827 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
828 kes Make arguments to get_scratch_volume() in same order as other
830 kes Rework the prune_volumes() subroutine so that after purging and
831 no volume found in desired pool, it will check for a scratch
832 volume. This prevents recycling the whole scratch pool.
833 kes Add code to status storage to print boffset_t (largefile support).
835 kes Move qwt (Graphics libarary for Qt4) to depkgs.
836 kes You now need a --with-qwt=<dir> to be able to build bat.
837 kes Update src/win32/cats/bacula_cats.def to include the new
838 db_get_query_dbids() call on Win32.
840 kes Correct a problem when selecting a scratch volume and moving
841 it to another pool that lost some columns.
842 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
843 kes Enhance Autochanger error messages to include Volume and device name.
844 kes Rework prune_volumes() code to take account of InChanger flag,
845 and to handle recycling volumes going to the Scratch pool and
846 current pool because the RecyclePool directive.
847 kes Implement a better and more efficient db_get_query_dbids() to
848 handle creating and passing back a list of DBIds.
852 kes Start work on new more efficient DBId subroutine. First use
853 will be for recycling volume to Scratch inchanger.
854 kes Increase number of JobIds in pruning from 1000 to 10000.
855 This to be replaced by above routine.
856 kes Begin implementation of building Qt4 on Win32.
857 kes Correct typo in fix I added for bad TLS shutdown.
858 kes Pull 2.0.3 patches into patches directory.
859 kes Update Release notes. Include qt-console in line count.
860 kes Update Projects file.
862 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
863 bug in migration code where a job that spanned two volumes
866 kes Implement new BST_DESPOOLING blocked state. Change from locking
867 during despooling in SD to blocking. This means that other threads
868 can work with the device structure, in particular the reservations
869 system while despooling.
871 kes Fix return in reservation message queue that missed clearing
872 the jcr lock (implemented 26Jun07 below).
873 kes Rename a number of dev methods to make locking function names
875 kes Document locking in lock.c. Move lock structures to new file
878 kes Move reservations message lock to lock jcr only this
880 kes Move main SD locking code into lock.c (new file).
881 kes Update Win32 build to include lock.c
885 kes Dirk committed the qwt library code for drawing graphs in bat.
886 kes Tweak install of qwt so that it is integrated with ./configure.
888 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
889 out by Eric (my typo).
890 ebl Fix configure.in to get batch mode enable
891 kes Return correct string from authenticate.cpp in bat when connecting
893 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
894 spurious line drops when using TLS.
895 kes Do not file reparse points when restoring a file that already
898 kes Implement Windows reparse points -- similar to directories, but
899 we do not descend into it. This is a first cut. They seem to
900 be backed up, but restore is not yet tested.
901 kes Remove restore_blocking in tls code when shutting a socket to leave
902 it in blocking mode. Hopefully this will fix the encryption bug
903 reported by Frank Sweetser.
904 kes When opening a file for backup, tell the OS that we are going to
905 read it sequentially -- optimization.
906 kes Change variable names in authenticate_director() to not conflict
907 with member names in bat. Caused great confusion with compiler,
910 kes Queue openssl error messages in case of comm problem.
911 kes Do shutdown() call if socket terminated.
912 kes Remove some duplicated code in tls.c
913 kes Move more of the bsock member variables into private and access
915 kes Add Frank Sweetser's tls-test to the regression suite.
917 kes Add Swedish sv.po file
919 kes Don't print clock skew message in FD if less than 3 seconds diff.
920 kes Add a bit of VSS info to status client.
921 kes Implement a first cut of Vista VSS, using Win2003 code.
925 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
926 loaded tape but uses first drive).
927 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
928 This was indeed a Win32 issue.
930 kes Simplify search of autochanger for in-use Volume.
931 kes Fix exit condition of check for in-use volume. kes Remove
932 inappropriate my_postgresql_free_result() in db_close()
934 kes Fix bad return in FD when encryption signature not found.
935 Probably caused a crash.
936 kes Inhibit missing encryption signature error messages for
937 file types where no signature computed.
938 kes Correct inverted check on autochanger in reservation system.
939 kes Tweak debug code in autochanger reservation.
941 kes Add some additional locking in the cats directory in subroutines
942 that modify packet variables called from batch insert.
943 kes Rework how dcrs are allocated. new_dcr() can now be called
944 with an existing pointer, and it will simply clean it up.
945 This allows the reservation system to test various different
946 devices, and will permit easy device changes.
947 kes A bunch of changes all over to handle new new_dcr() calling
949 kes Work more on the Volume management in the SD. Remember Volumes
950 for tape drives and for autochangers (even virtual disk changers).
951 kes When looking at the Volume list to reserve a drive, handle
952 autochanger names correctly by interating through the changer
953 devices. Also call the Director to see if a Volume is suitable
955 kes Fix some bugs in bscan. Make sure all media records are written.
956 Make sure that valid JobMedia records are written for disk files.
957 Previously they were completely wrong.
958 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
959 that the URLs don't change and so that the developers will all
960 work off the same copy. Rebuild from scrach.
961 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
965 kes Fix seg fault in FD from incorrect digest size.
966 kes Fix argument to non-OpenSSL crypto.c subroutine.
970 kes Remove a few malloc()s from the encryption code.
971 kes Use the class calls to bsock in filed/backup.c and restore.c in
972 place of the old bnet_xxx code.
973 kes Implement code that does an on the fly calculation of the
974 signing digest during restore of encrypted files. It makes
975 a best guess at the algorithm, and if it is not correct, will
976 then revert to the old code which reads the file after it is
978 kes Implement at least one missing crypto stream in stream_to_ascii()
979 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
980 #877 where a reload with bad syntax causes Dir to exit.
982 Cut: 2.1.14 beta (not released)
984 kes Do not free a volume on a tape drive until another volume is
985 mounted and read, or the autochanger unloads the volume.
986 This should help the SD re-use volumes that are already mounted,
987 and should fix bug #886.
988 kes Apply patch from user brettedgar that allows gnome2-console include
989 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
990 kes Apply patch from Lucien Weller that fixes day of week calculation
991 because of DST flag problem. Fixes bug #887.
993 kes Move find_next_appendable_volume() to after acquiring a valid device
994 in reserve.c. This fixes bug #864 -- confirmed by reporter.
996 kes Unable to reproduce bug 872. However added additional testing for
998 kes Bug #874 resolved by documenting SQLite limitations.
999 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1000 kes Bug #881 resolved by removing typo in mtx-changer script.
1001 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1002 approval. Added a link to the wiki on the web page, and implemented
1003 a backup from http://paramount.ind.wpi.edu
1005 kes Fix update allfrompool to pass pool name.
1007 kes Convert to pure GPL v2 license.
1008 kes Fix sscanf problems reported by Peter Buschman that caused
1009 a bus error on Solaris.
1010 kes Rework (simplify) the select prompt in bat.
1011 kes Move get_jobid_from_tid() into lib and create a
1013 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1014 should definitely fix the problem of lost error messages in the
1016 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1017 kes Eliminate tcpd.h from the project. Enclose the #include from the
1018 library with extern C ...
1019 kes Add print of signal name when a signal is trapped.
1021 Release: 2.1.12 beta
1023 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1025 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1026 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1027 makes SQLit3 run 30 times faster, though a bit less safe.
1028 kes Implement --with-batch-insert in configure and detection of thread
1029 safe libraries. It is on by default, but turned off if no thread
1030 safe library (e.g. SQLite 2) is available.
1032 kes Fix Bacula PostgreSQL buffer overruns.
1033 kes Do better checking for NULL results returned from PostgreSQL;
1034 implement retry for failed queries; clear results buffer after
1035 failed query. Hopefully this will correct the PostgreSQL failures.
1037 kes Implement algorithm to handle only one appendable volume with
1038 Prefer Mounted Volumes = no.
1039 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1040 returned from a query.
1041 kes Make volume lock recursive.
1042 kes Implement an additional volume reservation algorithm that
1043 starts by considering all reserved volumes then uses the
1044 old brute force algorithm of searching the resources to
1045 find a suitable device.
1046 kes Add new reservations debug code and refine the old code.
1047 kes Update the win32/dll/bacula.defs file.
1049 kes Tweak reservations algorithm to permit a few more cases, i.e.
1050 volume reserved, but on different drive, ...
1051 kes Enhance SD status to include Pool and Media Type for drive in a
1052 more readable format (a bit longer).
1053 kes Fix PostgreSQL double free.
1055 kes Minor refactoring of restore decryption code.
1056 kes Add code to smartall.c to detect double free of a buffer.
1058 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1059 so that bsmtp will create a correct email address (mailbox only).
1060 kes Modify 'memory' command so that the buffers are listed as 'In use'
1061 to avoid confusion with Orphaned buffers.
1062 kes I reworked the OpenSSL include/lib flags to be handled in
1063 the standard Bacula way, which should fix bug #863 concerning
1064 non-standard OpenSSL libraries.
1066 kes Implement Help Browser window for bat.
1067 kes Fix reload bug that reset StorageId to zero.
1069 kes Fix TLS #ifdefing when TLS turned off.
1070 kes Ensure that when labelling a tape with Slot=0 that InChanger
1072 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1074 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1075 add DISTINCT (required by PostgreSQL).
1076 kes Implement BSOCK authenticate_director() method. Eventually will
1077 authenicate all daemons.
1078 kes Move several more functions into the BSOCK class.
1080 kes Add code to tell the OS that we no longer need a cached
1081 file that we were reading. In findlib/bfile.c. Also,
1082 only cache files that we are reading. Thanks to
1083 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1084 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1085 kes Implement script to automatically generate cats and dll .def
1086 files for Win32 dll.
1087 kes Update README.mingw32 to include new .def file generation.
1088 kes Correct typo in UTF-8 error message as reported by:
1089 jhernandez <julianhernandez@gmail.com>
1090 kes Add additional sm_check() code on debug level 1.
1091 kes Set default debug level to 1.
1092 kes Trap SIGABRT in attempt to get traceback.
1094 kes Reduce bat connect timeout from 30 to 15 seconds.
1095 kes More restructuring and implementing BSOCK class in place of
1097 kes Remove a few unnecessary malloc() tests in crypto code.
1098 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1099 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1100 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1102 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1104 kes Fix Verify InitCatalog. The attributes were not pointing to the
1105 correct saved location.
1106 kes Implement message callback so that GUI is sure to get all
1107 daemon messages. Currently displayed in a dialog in bat.
1108 kes Ignore SIGUSR2 (Bacula timer) in bat.
1109 kes Apply regress patch from bug #859 to allow regress to work
1110 with Solaris compiler.
1112 kes Begin adding TLS support to bat.
1113 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1114 clean up lex.c and make it more readable.
1116 kes Move more bnet functions into the BSOCK class.
1117 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1118 kes Complete change of berrno strerror() method to bstrerror()
1120 Release: 2.1.10 beta
1122 kes Cleanup incorrect email addresses in bsmtp.
1123 kes Make bat display initial messages rather than discard them.
1125 kes First cut of adding .mod to the run command.
1126 kes Implement auto display of messages in bat.
1127 kes Enhanced preferences to allow all Bacula output to be
1130 kes Try to make bsmtp date routines more generic.
1131 kes Fixed bug #856 autochanger documentation.
1132 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1133 kes Add new cats entry point so Win32 builds.
1135 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1137 kes Do better checking for the MySQL 64 bit libraries looking for both
1138 .a and .so libraries.
1139 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1140 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1141 kes Require the thread safe version of MySQL during configure. Thanks
1142 to Andre Noll for pointing this out.
1143 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1144 continuing in migration code.
1145 kes Apply implementation of tray-monitor font derived from gnome-console
1146 submitted by Andreas Piesk <a.piesk@gmx.net>
1148 kes Eliminate important memory loss in SQLite
1149 kes Fixed the batch insert MySQL thread specific data that was not
1150 being freed. See cats/mysql.c:db_thread_cleanup().
1151 kes Fix restore before command.
1152 kes Convert old hdr.name to name() in a few places.
1153 kes Implement update jobid command.
1154 kes Return all time_t dates in db_get_job_record()
1155 kes Stop watchdog in SD earlier.
1156 kes Put Pool just after Storage in please mount message.
1157 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1160 kes Update the po files.
1161 kes Fix Verify InitCatalog by making it cache attributes.
1163 kes Change name bacula-bat to bat for man 1 page to correspond to
1165 kes Check for client and store NULL pointers in status command. This
1167 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1168 kes Fix sign extended editing of %p.
1169 kes Clean out a little old #ifdefing in cats/mysql.c
1171 kes If time diff between DIR and FD is more than 600 seconds convert
1172 INFO message to WARNING.
1173 kes Implement heap size display in status for all daemons.
1174 kes Attempt to fix MySQL db open memory loss (not successfull).
1175 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1176 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1177 Query. This looks like a MySQL but but by doing extra releases,
1178 the memory goes away. This should fix bug #847.
1180 kes When backup fails, cancel SD before waiting for sd termination.
1181 kes If SD is waiting for FD to connect during cancel, wake up the
1183 kes Fix fsf code so that errno is correctly reported.
1184 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1186 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1187 so that Bacula doesn't later stumble into a seg fault.
1188 kes Use the term Restore Client in the restore Job report.
1189 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1190 the original job's FileSetId.
1191 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1192 spooling in migration jobs. Not yet tested.
1193 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1194 reading conf file from a pipe. However, do it with open_bpipe()
1195 rather than popen. Not yet tested.
1197 kes Fix an ugly bug where the VolCatBytes were getting updated
1199 kes Implement bconsole memory command that prints current memory
1200 usage, plus smartalloc dump.
1201 kes Clarify some error messages in backup, admin, and migrate.
1202 kes Shrink label dialog to smaller size.
1203 kes Invert Cancel OK buttons on restore to be OK Cancel.
1204 kes More strerror() to bstrerror() conversions.
1206 kes Start implementing bstrerror() in place of strerror().
1207 kes Stripping path -- seems to work.
1209 kes Prevent door and port files from being restored (mostly
1211 kes Free an unreleased buffer in compat code.
1212 kes Change console Job name from *Console* to -Console- to eliminate
1213 Win32 filename problems. Put Win32 path separator when creating
1214 Console file. This fixes bug #846.
1215 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1217 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1219 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1220 to force Win32 error message.
1222 kes First cut strip path. The data should be passed to the FD,
1223 but nothing is done with it yet.
1224 kes Enhance the digest and signature routines in the crypto
1225 library to accept a JCR and to use it to print error messages
1226 so that they will go in the Job report rather than the daemon's
1228 kes Simplify some of the verify signature code.
1229 kes Simplify a few of the alternative returns in the signature
1232 ebl Use only POSIX regex instead of GNU regex in breg.c for
1233 File relocation. It fix broken freebsd compilation.
1234 kes Convert all other Dir files to use new ua class message
1236 kes Tentative fix for missing digest signature in bug 807.
1237 kes Correct handle problem in new win32_ftruncate routine.
1238 kes Convert ua_purge.c and ua_update.c to use new ua class
1239 message routines for bat.
1241 kes Correct incorrect installation of LICENSE in Win32 installer.
1242 kes Display LICENSE at the beginning of the Win32 install.
1243 kes Attempt to correct the need for the png files to be installed
1245 kes Reapply my bat.conf install script in qt-console. I think I
1246 editted bat.pro instead of bat.pro.in and it was lost.
1247 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1248 the /var/lock/subsys for subsysdir. Also corrects typos in the
1251 kes First cut update job.
1252 kes Correct configure to include qmake of src/qt-console directory.
1254 kes Make restore job yes/mod/no print in one command so GUI works.
1255 kes First cut implementing backup and restore client.
1256 kes Correct editing in Verify output that caused a seg fault.
1258 kes Insure that bat.conf is not overwritten during installation.
1259 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1260 while I was implementing migration in March 2006 !
1262 ebl Cleanup file relocation, using char *RegexWhere instead of
1263 char *where + bool where_use_regexp
1264 kes Update some manpages and add bat manpage.
1265 kes Make a first cut at converting bacula.spec.in for bwx-console
1267 kes Apply patch from John Goerzen to add hostname as fourth argument
1268 to make_catalog_backup script.
1269 kes Fix typos I introduced into bsmtp.c
1270 kes Make pm_strxxx() routines handle input of NULL pointer. This
1271 is to protect from NULL pointers returned from SQL databases.
1272 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1273 kes Add more debug to FIFO code -- fix fifo regression test.
1275 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1276 kes Add thread timer to bnet_connect() to break from OS if wait time
1279 kes Update Win32 build to include new files, new symbols, and
1281 kes Implement socket level heartbeat (tcp_keepidle)
1282 ebl Commit File relocation patch
1283 kes Make bat have 'make install' target.
1284 kes Warn during install if old gnome-console binary found.
1285 kes Warn during install if old wx-console binary found.
1286 kes Add -8 option to bsmtp command line to add content type utf-8.
1287 Fixes bug #809. (Character coding problem in bsmtp).
1288 kes If < is found in target (from, to, cc) then do not enclose the
1289 target in < > in bsmtp. Fixes bug #772 (malformed address).
1290 kes When printing certain items in dbcheck, stop after 300000.
1291 Fixes bug #822. (dbcheck loops).
1292 kes Incorrect status in Dir after waiting for mount with poll set.
1295 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1297 kes Print waiting to reserve a device every 5 mins.
1299 kes Don't call close_part in label.c if tape and relabel.
1300 kes Don't free volume if busy in close() -- should help with
1302 ebl Fix #824 RunScript bug (After script could be execute twice)
1303 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1304 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1305 Add a regression script to test RunScript
1307 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1310 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1311 deprecated. No additional bugs will be fixed, and they will be dropped
1312 in a future release (probably 2.4.0).
1313 kes Change name of wx-console to bwx-console to make it more Bacula
1315 kes Change the name of gnome-console to bgnome-console to make it
1318 kes Some time in March, a Feature Request with patch from Jorj Bauer
1319 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1321 The ability for the director to validate a Client (FD) CN against
1322 an arbitrary set of patterns rather than the hostname, with
1323 A new 'TLS Allowed CN' set of directives which are implemented
1324 in the Client resource. Then pattern matching is used in place
1325 of hostname matching against the Certificate's CN. As an example, we
1326 have certificates which (a) use a local CA, and (b) have a CN of the
1328 kes Add new/changed entry points to Win32 build
1329 kes Create unaccepted-projects for projects that are not accepted.
1330 kes Simplify locking in the reservations system.
1331 kes Add more debug code in reservations.
1332 kes Make sure error condition on reserving a volume is handled correctly.
1333 kes Correct handling of volume_in_use.
1334 kes Correct handling of initializing a device.
1335 kes Move handling of broadcasting releasing a device into release_device().
1336 kes Correct attaching dcr to dev so that it is only done if device
1337 is properly initiated.
1339 kes Locking debug level tweaks in SD.
1340 kes Tweak new Volume code.
1342 kes Add exec external-command [wait-seconds] to bconsole. This
1343 executes the external-command. Note! normally external-command
1344 should be enclosed in double quotes.
1345 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1346 it should normally be off in a production system.
1348 kes Implement die command for SD so that we can force it to dump.
1349 kes Implement SD lock debug code.
1350 kes Implement new algorithm for keeping Volume list in SD. It
1351 is now owned by the device.
1353 kes Implement new code for freeing in use volumes that should
1354 resolve if not all, some of the problems of multiple drive
1355 tape conflicts described in bug 801.
1357 kes Fix gui/bacula-web/images files in svn.
1358 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1360 ebl Fix a bug in batch mode (in string escape)
1361 kes Correct migration prune SQL typo that crept in in a
1362 recent 2.1.x change.
1364 kes Move bnet_despool() into class in bsock.c
1365 kes Modify job report to include director name and Build OS.
1366 kes Move drop root privilege and check_catalog() before fork.
1367 kes Add update database scripts (version 9 to 10) to updatedb directory.
1369 ebl Check size and age of each file after its backup to see if
1370 it has changed during backup, if 'checkfilechanges' is set.
1371 The FD will do an extra check (stat(2)) after
1372 each file backup. mtime, ctime and size are compared with
1373 'before backup' information. If time or size mismatch, an
1374 error message will be generated. You must upgrade FD to use it.
1376 kes Make database name and user configurable
1377 --with-db-name=xxx --with-db-user=xxx
1378 kes Add back database type to message.c for debugging.
1380 kes Implement dir_sql() which issues an SQL query.
1381 kes Modify bat medialist to use dir_sql() and do some minor C++
1382 formatting as well as eliminating a number of pointers, simplifing
1385 kes Fix some of the mtx-changer grep commands for tape label readers.
1386 kes Convert a number of bsendmsg into the appropriate send/warning/error
1387 message class calls.
1388 kes Suppress the using database message in the .sql command.
1389 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1391 kes Add context menu for floating a window.
1392 kes Some minor cleanup and name changes in qt-console
1393 kes Add doing mt setblk 0 in Win32 mtx-changer.
1394 kes Apply Martin's bug fix to move definition of ENODATA for
1396 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1397 sqlite2 and sqlite3.
1399 kes More pruning cleanup.
1400 kes Turn on wait_for_drive by default in mtx-changer.
1401 kes Turn on Batch insert code by default as it now passes regression.
1402 kes Add ./configure --enable-bat to enable building of Bat.
1403 No install yet though.
1405 kes Implement a new .sql command for bat.
1406 kes Implement code to turn off pruning in obtaining the next volume.
1407 Pruning is turned off for the status dir command, but turned on
1408 for SD requests and for the list nextvolume command.
1410 kes Correct Qmsg() that was not updated correctly when committing a
1411 previous change (probably the recent TLS patch).
1413 kes Write new subroutine is_volume_purged() that explicitly checks
1414 if the Volume is purged, and if so marks it as such. This should
1415 resolve problems reported about needing to mount twice to recycle
1417 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1418 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1419 amount of duplicated code.
1420 kes Do volume pruning only for the Media Type desired (reduces pruning time
1421 if multiple Media Types are in the same pool).
1422 kes Implement more detailed info in the Job report for the Bacula version
1424 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1426 ebl Add bbatch tool to bench database and insert mode.
1427 Fix sql quote stuff in batch mode
1428 Fix sql stuff for mysql
1430 kes Correct problems with am/pm scheduling. Fixes bug #808.
1431 kes Implement new prunning code that prunes up to 1000 jobs at
1432 the same time. The same technique can be applied to a number
1433 of other prune/purge subroutines.
1434 kes Add an insanity check when starting a new tape job to ensure
1435 that the tape position has not been changed. If so fail the
1437 kes Fix Win32 build for dlls to add the folllowing:
1438 src/lib/bsock.c -- new file with new entry points
1439 src/lib/dlist.c -- new entry points
1440 src/cats/sql_create.c -- new entry point
1441 src/cats/sql_cmds.c -- new DATA item exported
1443 ebl batch mode cleanup bscan-test is ok now.
1444 kes Implement SD code to check length of disk volume before appending.
1446 kes Correct return status on db_batch... routines.
1447 kes Add call to db_write_batch_file_records() to migration code.
1448 ebl Fix AfterJob timing
1449 kes Move the checking of the database in initializion of the Director
1450 to after we drop privileges. This avoids the need for both root
1451 and bacula access to the DB.
1452 kes Correct a misplaced variable definition in src/filed/backup.c
1453 kes Correct how the new batch insert db_create_attributes_record()
1454 uses the arguments. Caused a seg fault in bscan.
1455 kes Implement lock() and unlock() methods in DEVICE class.
1456 Implement block() and set_block(xx) methods in DEVICE class.
1457 kes Modify bnet_connect() so that it uses time() to check for the
1458 wait time expiring (on some OSes, some system calls may not
1459 return immediately).
1460 kes Modify Verify to obtain the previous JobId when it is actually
1461 running rather than at schedule time (as it was in 1.38.x).
1462 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1464 kes When checking pid in pid file, continue running if the pid is
1465 the same as ours. This occurs on IRIX after a system crash.
1468 kes Extend new GUI API.
1469 kes Make the ua structure a class, and implement send_msg(),
1470 error_msg(), warning_msg(), and info_msg().
1472 kes Apply fix from for building wx-console on the Mac from
1474 kes Implement new select mechanism for GUI programs.
1475 kes Reorganize initialization of stackedWidgets in bat.
1477 kes Add updated nagios plugin supplied by Christian Masopust.
1479 kes More bat implementation.
1480 kes File migrate bug with Pool Occupancy using mediaid instead
1481 of jobids. Fixes bug #795.
1482 kes Fix orphaned buffers in filed backup and verify due to
1483 crypto buffers not freed during errors. Fixes bug #789.
1484 kes Extend new GUI api code to tree commands.
1485 kes Ensure that tree and dot commands check console ACLs.
1486 kes Permit marking directory with trailing slash.
1487 kes Allow 20 console connections (instead of only 10).
1489 kes Add smartctl call to bacula-sd.conf as an example of getting
1492 kes Modify jobq.c to let simultaneous restore jobs run. This may
1493 cause them to fail if they cannot get a drive.
1494 kes Add Client Connect Wait to Storage daemon to permit users to
1495 modify the time the SD waits for a FD connection.
1497 kes Correct virtual changer check which was backwards. This caused
1498 volumes to be unloaded into slots already occupied.
1500 kes Apply Command ACL filter to JobId list in restore command.
1501 kes Correct typeo in var.c patch.
1503 kes Don't let Bacula prune File or Job records for the current Job.
1504 kes Fix variable substitution pad + inc bug reported (with patch)
1507 kes Correct SQLite log table index as reported by Luca Berra.
1509 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1511 kes Begin implementing new comm signals for API.
1512 kes Fix a few places in lib/message.c where the open fd may
1514 kes Continue implementing lib/bsock.c (real class). Make jcr,
1515 who, host, and port private. There are new methods to access
1516 them for non-class use. This required touching a number of files.
1518 kes Add LANG=C to autoconf/randpass so it works with languages other
1519 than English. Fixes bug #788.
1521 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1523 You will not be able to generate Include/Exclude list any more.
1524 It will be fixed soon.
1525 If you want to use this, you can apply
1526 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1528 kes Restore of sockets created false error messages because Bacula
1529 no longer restores sockets, but the code was still trying to
1530 set the attributes on a non-existent file. Reported by a user.
1531 ebl finish RecyclePool feature
1532 Media will takes Pool.RecyclePool
1533 when moving from Scratch to a Pool or when user will do
1534 update volume=xxx frompool
1535 To use it, add RecyclePool = aPool to your Pool resource
1538 RecyclePool = Scratch
1542 kes Expand new BSOCK class adding signal() and new BNET signals.
1543 kes Begin enhancing the dot commands adding a new API function
1544 that returns more information and will make it easier
1545 to interface to the Director from a program.
1547 kes Make DEVICE fd private. Its new name is m_fd, and can be
1548 obtained with dev->fd() outside the class. This is the
1549 first of many DEVICE members to be made private.
1550 kes Implement Michael Renner's idea on having a virtual disk
1551 changer. I made some minor modifications (e.g. I did not
1552 implement the Virtual Changer directive, but simply set
1553 the Changer Command to an empty string.
1555 kes Implement a BSOCK send() method that writes the whole record
1556 in a single write() request rather than in two.
1557 ebl add update volume=xxx recyclepool=yyyy
1558 volume takes recyclepool from pool when using update volume=xxx from pool
1560 kes Fix encryption deblocking bug, which caused some restored files
1561 to be truncated. This fixes bug #763.
1562 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1563 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1565 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1566 ebl Use btime_t instead of uint64_t in media patch.
1568 kes Optimize the use of the database a bit in the Status dir command.
1569 Only open it when needed, ensure that if any previous database
1570 was opened, it is closed.
1572 kes Correct VolCatBytes bug from media patch.
1573 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1574 in the case of orphaned records.
1575 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1576 and File records in 300K chunks to be more efficient. This
1577 idea came from Juan Luis Frances (if I remember right).
1578 kes Apply Eric's scratch patch that moves a purged Volume to
1579 the RecyclePool. Question: how is RecyclePool set? what
1580 happens to the ScratchPool?
1581 kes Apply Eric's media patch that collects read/write media
1582 times as well as byte counts. This patch requires a
1583 simultaneous upgrade of the DIR and SD. Note, there
1584 should be some way to turn off timing. I'm not sure
1585 times are in Bacula units.
1586 kes Apply Eric's batch-insert patch.
1588 kes Update projects list.
1590 kes Implement Include/Exclude file lists in FD as dlists using
1591 the new dlistString class. This permits efficiently having
1592 large include/exclude lists and completes project Item 25.
1593 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1594 console is authorized to cancel the job. This fixes bug
1596 kes Modify SD so that the VolCatJobs medium record is updated
1597 at the beginning of a Job rather than the end. This
1598 fixes bug #775 where exceeding MaxVolJobs caused jobs
1600 kes Added a mutex around getting and setting Volume information
1601 so that multiple simultaneous jobs will single thread.
1603 Switch to using Subversion
1604 kes Remove src/pygtk-console/ from configure
1606 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1607 plus the entrypoints.
1608 kes Apply patch supplied that corrects debug print
1609 in canceling jobs for max run time. Supplied as
1610 part of bug #621, which was previously fixed.
1612 kes Test on job_canceled() and sd_msg_thread_done inside
1613 loop starting the message thread to avoid a race condition.
1615 kes Remove rl_catch_signal from console.c as it conflicted
1616 with the header definition. Fixes bug #765.
1617 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1619 kes Clarify some stored/acquire messages to indicate if the
1620 problem is with read or append.
1622 kes Fix memory leak with storage ids in cats/sql_get.c
1623 kes Terminate watchdog earlier to avoid reference to released
1624 memory -- reported by Jason Austin.
1625 kes Move closing the database from jobq.c to the director daemon
1626 termination routine. This fixes memory leaks for shadow jobs
1627 (i.e. migration jobs).
1628 kes Free up the unique jobid chain items in migrate.c. This fixes
1629 a memory leak problem.
1630 kes Convert some ugly looking for statements to use foreach_alist
1631 in findlib/find.c. This will facilitate converting the structures
1632 to use dlist (for large include/exclude lists).
1633 kes Fix a bug in the btree.c and btree.h routines, then rename them
1634 rblist and add them to be built in src/lib. Include some new
1635 methods written by Rudolf Cejka that make the code more readable
1636 (hides some of the ugly casting).
1637 kes Add set_next() and set_prev() methods which make the code much more
1638 readable. Also add a new dlistString class that facilitates storing
1639 strings in dlists. To be used in the large include/exclude lists.
1640 kes Make some trivial modifications to lib/tree.h that use rblist
1641 rather than dlist for storing the tree links. This was suggested
1642 by Rudolf Cejka. The result of this is that the restore tree now
1643 uses red-black binary trees rather than simple linked lists. This
1644 should give rather dramatic speed improvements for directories
1645 contining large numbers of directories/files (more than 10000).
1647 kes Fix maxruntime bug #621.
1649 ebl Implement the include JobID in spool file name project.
1650 kes Reorder projects file in order determined by Jan 2007 vote.
1651 kes Implement item #12 on project list -- quick release of FD by
1653 kes Fix open of SQLite3 db where user does not have write permission
1654 so that DIR does not crash. Fixes bug #761.
1656 kes Add back missing @ in Win32 Makefile.
1657 kes Change 'Device not configured to autolabel' from INFO
1659 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1660 which should restart an indefinite # of times.
1661 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1662 other DIR specifications.
1664 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1665 Fix path quoting in SQLite scripts.
1666 Fix problems with SHGetFolderPath.
1668 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1670 kes Fix Job restart on error bug that promotes an Inc to a Full
1671 backup. This should fix bug #755.
1672 kes Add qt-console and first cut of code.
1676 kes Fix Bacula->Documentation link on Win32 to point to index.html
1677 instead of bacula.html. Fixed bug #750.
1678 kes Return JobId in db_get_job_record() when JobId==0. This should
1680 kes Do not release source pointers when restarting a failed job.
1682 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1683 This *should* fix bug #747.
1684 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1687 kes Modify USTORE constructor to set an empty store_source string,
1688 and don't copy the store_source string in a cancel. Hopefully
1689 this will fix Arno's seg fault, bug #744.
1690 kes Add back code to disable conio in configure. Fixes bug #743.
1691 kes Correct the Options scanner in the FD to correctly handle
1692 SHA1 option, which was eating the next option. Reported by
1694 kes Add code to indicate when the SD is spooling, spool wait, and
1695 despooling as requested by Alan Brown.
1697 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob