1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Prevent a Volume that is being swapped from being freed from
29 the volume list. This will most likely fix, at least partially,
31 kes Fix strippath so that it does not get a buffer overrun and crash FD.
33 kes Remove 50 millisec wait in SD that broke debugger.
34 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
35 that a job may run, counted from when the job was scheduled.
36 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
37 a job may block waiting for a resource, counted from when the job starts
38 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
39 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
40 that implements multiple commands per line in the console when using
41 readline. Modify the default to use a semicolon as the command separator.
43 ebl Fix SQL query in migration code.
44 ebl Make accurate mode with hash disk pass regression tests
46 ebl Implement first cut of accurate backup with hash disk.
48 kes Force unload of volume when wrong volume mounted in SD.
50 kes Fix bat seg fault at termination.
51 kes Add Bacula generated version to bat about box.
54 kes Experiment with allowing multiple read jobs.
55 kes Move final volume swapping code to DCR method and
56 call it from acquire_for_read().
57 kes When wrong volume is mounted during read, unload_autochanger.
59 kes Integrate the libdbi changes from Joao Henrique Freitas
61 kes Stop searching for Volumes in SD askdir if DIR returns the
62 same volume name twice in a row.
63 kes Close bat console windows first to eliminate error message
66 kes Tweak the swap Volume from one drive to another code so that
68 kes Resolve several problems with recycling that broke the new
69 code (these problems are in 2.2.9 as well).
70 kes Remove the volume lock when calling the sysop code.
71 kes Don't mark a reserved volume with no writers as unused otherwise
74 kes Rework class structures for VOLRES, DCR, and DEVICE to make
75 the method names a bit more logical, and for more logically
76 handling the responsibilities.
78 kes Remove redundant code in terminating the scheduler that just
79 causes a seg fault in many cases.
80 kes Cleanup releasing a volume and make it a DCR method.
81 kes Improve algorithm for detecting pre-reserved volume and
84 kes Tweak volume swapping code so it works.
85 kes Correct name overloading in mount.c
86 kes Replace released flag in VOLRES with reserved and add access
87 methods for the VOLRES class.
88 kes Prevent volume from being released while being swapped.
89 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
91 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
93 kes Refactor parts of stored/mount.c
95 ebl Add sanity checks for VolWriteTime and VolReadTime
96 ebl Take care of bad clock changes while computing VolWriteTime
97 and VolReadTime. This should fix or limit #1066
98 kes Correct error string numbers in dird/catreq.c
99 kes Restructure reserving, acquiring, and mounting volumes. Calls to
100 autochanger are deferred for mount.c -- simplifes the code.
102 kes Do not prune any running job. It just fails the job.
103 kes Lock the volumes when changing dev->reserved_device and marking
104 the volume unused otherwise the device can get reserved by
105 another job before the volume is released, thus blocking it.
107 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
108 kes Fix bug #1063, reuse of freed ptr in list nextvol.
109 kes Release regex compile buffer in filed/job.c
110 kes Add proper type of const char in sql_create.c
111 kes Turn off debug in daemon termination routines
112 kes Move free_volume_list() before devices are freed in stored.c
113 kes Fix reference to uninitalized stack variables in bregex.c.
114 This should correct bug #1067.
116 kes Fix possible seg fault in SD when freeing a volume entry.
118 kes Implement unload_dev() before swap device.
119 ebl Add statistics prunning with option and menu
120 kes Separate unload_dev() from unload_other_device() in autochanger.c
122 kes Apply patch from bug #1069 that corrects spurious error messages
123 when ACLs enabled on SGI but no ACL exists.
124 ebl Fix small segfault in bacula-sd when debug level is 500
125 kes Modify run_program() and run_program_full_output() to use
126 call by reference for the results string. This corrects a long
127 standing problem where the address of the string may be changed
128 in the subroutine but not in the calling program.
130 kes Re-enable code to remember last volume mounted on a non-tape
132 kes Add patch supplied in bug #1068 that fixes a SD crash when using
133 a Virtual autochanger.
134 kes Generate correct JobMedia records during spooling/despooling when
135 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
136 <tih@hamartun.priv.no> for excellent analysis and testing.
138 kes Tweak hash algorithm for htable using Martin Simmons idea
139 for doing a circular shift.
140 kes Remember what volume is in VTLs (previously turned off for
142 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
143 pointed out some problems in creating JobMedia records during
144 spooling with concurrent jobs. Fix the problem by updating the
145 start file position before despooling and generate a jobmedia
146 record at the end of despooling.
148 kes Fix handling of JobMedia records during spooling and when a
149 Volume is changed without actually writing data to the Volume.
151 kes Rework certain SD locking based on gdb tracebacks of deadlocks
152 sent by Eric. This code now uses only the volume_lock() rather
153 than the reservations lock when at EOM and acquiring a new
155 kes Ensure only one exit point in several subroutines.
157 kes Implement bsock code to permit locking. Use the new code in Verify
158 in the FD to prevent the heartbeat thread from disrupting the Verify
159 data sent to the Dir.
160 kes Modify SD locking to eliminate locking the reservations system from
161 outside the system. Use the volume lock when getting media data
162 and reserving a new volume at end of media.
163 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
164 when SD starts are not locked into place.
166 kes Fix error compiling runscript code on 64 bit machines.
167 kes Tweak Win32 mount point code.
168 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
169 cleared giving bad file estimate).
170 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
173 kes Keep Schedule run lists in order as suggested by
176 kes Implement autostart scripts for Debian.
177 ebl Implement upgrade catalog scripts.
179 ebl Apply jobstat patch for long term statistics. Have to implement
180 purge stats command and upgrade scripts.
181 kes Fix mtx-changer.in for broken Debian mt program.
183 kes Fix large number of JobMedia records reported by Eric Bollengier.
185 kes Apply doc fix from bug #1062.
186 kes Resolve crash and improper restore wx-console Win32 restore
187 GUI. Fixes bug #1065.
188 kes Update Win32 wxWidgets to latest version.
189 kes Attempt to do correct handling of Win32 mount points. Should
191 kes Fix Win32 FD backup/restore memory leak due to improper termination
192 of BackupRead/Write. This fixes bug# 1038.
194 ebl Reduce memory usage for accurate backup, working only with ctime
195 and mtime. (not all Lstat field)
196 About 40MB for my linux system (400.000 files)
198 kes Add dcr->reserved_volume flag that allows us to release a volume
199 even if it is not vol->released. This allows maxvol2 to work when
200 Volumes expire and we are already writing to the device (i.e. a
201 volume is pulled out from under us by another job terminating after
202 we reserve the drive).
204 ebl Permit multiple command/console per runscript definition.
205 RunScript { command = /bin/true ; command = /bin/false ... }
206 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
207 (restart an application) just after the VSS snapshot on windows.
208 kes Don't zap dcr values during release_volume() as they might
209 have the next Volume to be mounted.
210 kes Fix AIX prototype.
212 kes Second cut of drive switching during backup.
215 kes Update Win32 version of wxWidgets to most recent version.
216 kes Tweak Copy job details.
217 kes Rework dir_find_next_appendable_volume to make a bit more effort
218 to find a suitable volume before giving up.
220 kes Make ask_sysop_to_create... to return if waken from wait.
221 This helps get out of blocked conditions.
222 kes Experimental implementation of switch_device in reservations.
223 kes Implement FD version to allow easier protocol changes.
224 kes Add Plugin Options string -- not yet passed to FD.
225 kes Implement PluginOptions ACL.
227 kes Attempt to correct problems with restores with autochangers and
228 use counts going negative
229 kes Rework SD status command and implement API for bat. Implements
230 header, runing waitreservation, devices, volumes, spooling,
231 and terminated status keywords.
232 .status storage=xxx <keyword>
233 kes Clarify TLS error message by adding double quotes around name.
234 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
235 kes Pass jcr to tls routines so debug messages can be handled better.
236 kes Rework jobq resource allocation code, and possibly fix a bug
237 that caused reference counts to get out of sync.
239 kes Rename fd/dir plugin to use Bacula standard underscore.
240 kes Plugin work -- bring dir up to fd level.
241 kes Start implementation of VTL code
242 kes Fix Win32 build after adding new cats subroutine.
244 kes First cut at Duplicate Job implementation.
246 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
247 kes Start PluginOptions string, and refactor a bit of ua_run.c
248 ebl Apply Allan patch that permit to reset recyclepool.
250 kes Test patch -- possible fix or improvement for bug #1053
251 kes Refactor FD and SD status commands to permit new API code in
252 SD, and to fix Win32 build.
253 kes Win32 build is now working.
255 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
256 some ideas in patch from Scott Bailey.
257 kes Begin implementation of duplicate Job control.
258 kes Fix some of Win32 build after recent additions.
259 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
260 which causes the FD to detect whether or not the OS has the
261 honor no dump bit (*BSD systems), and if so, to skip backing up
262 any file with this bit set. The feature is enabled by setting
263 'honor no dump flag = yes' in the Options section of a FileSet.
265 kes Correct po warning message with datarootdir
266 kes Implement more code in dird.c to put configuration parsing in
267 a class rather than use globals.
268 kes Restructure SD status command for implementation of bat API
271 kes Suppress incorrect 'Will not descend from x into y' messages.
272 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
273 daemon globals used by parser.
274 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
276 kes Fix free of plugin_list when none exists.
278 ebl Apply accurate project patch.
280 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
281 on non-mempool object)
282 kes First cut of converting FD .status to work with bat API.
284 .status client=XXX header
285 .status client=XXX running
286 .status client=XXX terminated
287 kes Implement first cut of Copy Job.
288 kes Implement Catalog in Pool resource. It overrides catalog specified
289 in the Client resource.
291 kes Apply patch (with some difficulties) from Joao Henrique Freitas
292 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
294 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
295 ftruncate() actually works. In the case of some (cheap) NAS devices,
296 it does not, and so recycling NAS Volumes does not work. The code
297 simply unlink()s the file, then recreates it. This fixes bug #1011.
299 kes First incomplete cut of big malloc blocks for htable.
300 kes Tweak plugin code.
302 kes Plugin debug code + tweak a couple bat dialog layouts
304 kes Fix creating first JobMedia record during Migration to include
305 proper index. This caused slow restores of migrated jobs.
306 kes Temp fix to plugin name file_index.
307 kes Bacula backed up and restored a MySQL database.
309 kes Implement plugin restore.
310 kes Implement parsing of db_driver to give db_type index.
312 kes First cut of plugin restore code.
313 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
314 and do not strip paths on symbolic links.
315 kes Set catalog backup database and user name from values specified on
316 the ./configure line.
317 ebl Fix #1031 about wrong pool source information in job report.
320 kes Remove a redundant jcr argument to find_files, match_files, and
322 kes Implement '.status dir header|scheduled|running|terminated' that
323 prints the requested status section. With the exception of the
324 header, the other reports have fields separated by tabs (\t).
326 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
327 a resource embedded run command to find a since time if no explicit
328 since time was supplied on the command line.
329 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
330 that updates the state file at job termination time in addition to
331 when the daemon terminates.
333 kes First version where a plugin did a backup.
334 bpipe-fd.so created a backup file, wrote a test
335 string to it, and Bacua could restore this fabricated file.
337 kes Implement DB Driver = string for the DBI driver.
338 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
339 kes First cut of code for loading Win32 plugin dlls. Implement
340 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
341 and implement a dlfcn.h file based on opengroup's definitions of
344 kes First cut plugin directives.
346 kes Apply patch from bug #1049 to prevent stripping the path on a
348 kes Attempt to fix bug #1047 where stripping a path corrupts the
349 heap. Waiting for feedback.
350 kes Correct the Mount message not to suggest labeling a new tape
351 when doing a restore. Submitted by email by John Stoffel.
352 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
353 FD by using casting. Reported in bug #1042.
355 kes A bit of crypto cleanup. More later.
357 Release Version 2.2.8
359 kes Apply patch from Martin to correct bug #1040, bscan sets existing
361 kes Fixed important spelling error in doc -- bug #1045.
363 ebl Fix bextract to be able to extract non-portable Win32 data to
365 kes Move initialization of read/write res lock earlier in the code.
366 This fixes the crash with a null conf file. This fixes bug
368 kes Redefine CURES in lib/parse_conf to be URES and move it all
369 into lib/parse_conf.c -- this responds to bug #1042, but does
370 not fix it. The fix is not to compile with FORTIFY_SOURCE.
371 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
372 the trunk SVN. I don't think this was reported as a bug.
374 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
376 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
378 kes Add DataDespooling and DataCommitting status (committing is
379 the last despooling).
380 kes Finish implementation of new reservations code noted below.
382 kes Fix bsnprintf for float point numbers. I broke recently when
383 parameterizing some variables. This fixes bug #1036.
384 kes Undo recent reservations changes ... will apply them later
385 when they work better.
387 ebl Fixes #1034 which cause mysql to hang the connection after 8h
388 ebl Change default statistics target of filename.name and path.path
389 fields for PostgreSQL. This speeds lookup by indexes. Thanks
391 kes A few more tweaks to new reservation code. Make sure to clear
392 vol released flag when retaking volume. When reading label and
393 label is bad mark volume unused. When recycling, mark volume
394 unused so it can be renamed.
396 kes Fix reserve_volume() so it doesn't release a volume in use
397 (i.e. a volume entry not marked released). This should be
398 the last part needed to fix bug #1018.
400 kes Move Heartbeat documentation from Job to Director resource.
401 This fixes bug #1033.
403 kes Fix existing switch drive SD code to call autochanger to release
404 any old volume. This must be done to keep the autochanger from
405 releasing subsequently newly reserved volumes in doing a close().
406 This should fix bug #1018.
407 kes Fail if attempting to get console input in batch mode. This
408 should help fail RunScript console commands that are incomplete.
409 kes First cut implementing switch_drive() in SD (not actually called).
411 kes Implement first cut running console commands in a RunScript.
413 ebl Fixes bug #1028 where 'Selection Type' option was not usable
415 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
418 Release Version 2.2.7
420 kes Add new free_tls() entry point so that Win32 builds.
421 kes Fix compile warning in src/lib/util.c
422 kes Fix entry point for edit_job_codes() so that Win32 builds.
423 kes Fix seg fault Frank Sweetser reports in regression testing
424 on his systems. The problem was that the original author of
425 bsnprintf.c did not take into account the side effects of
426 using ++x in the argument to a #define.
427 kes Make SD protocol backward compatible with version 2.2.x.
429 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
430 because Bacula no longer restores sockets.
431 ebl Always use ignorecase fileset option on win32 FD.
433 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
434 that implements double quoting include names in conf files,
435 and also allows piping input by having the first character
436 be a vertical bar (|).
437 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
438 that implement %f in RunScripts to pass the FileSet name.
439 kes Skip leading | when lex input comes from a pipe as suggested
440 by Michael Stapelberg <michael@stapelberg.de>.
442 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
443 Nerijus Baliunas <nerijus@users.sourceforge.net>
445 kes Implement Plugin Directory and plugin events.
447 kes Implement a security enhancement: TLS authentication but no
448 encryption. Enabled by setting 'TLS Authentication = yes'.
449 Note when this is on, TLS encryption is turned OFF!
451 kes This patch corrects a problem where the maximum concurrent storage
452 jobs counter gets out of sync during restore jobs causing jobs to
453 'wait on max Storage jobs'. This patch fixes bug #1009.
455 kes This patch fixes bcopy so that it produces correct Volumes.
457 kes This patch eliminates spurious output to the console during a VerifyVolume
458 job that contains encrypted data. It fixes bug #1024.
460 kes This patch prevents the 'status dir' command from trying to use a scratch
461 volume and possibly moving it from one pool to another. This patch fixes
464 kes Add new include to postgresql.c suggested by Marc Cousins so
465 that it compiles correctly with pgre version 8.3.
467 kes Fix --archivedir addition to configure. Replace it with
468 --with-archivedir in configure.in This fixes the regression
470 kes This patch fixes bug #1012 where the job is canceled because
471 of Max Run Time exceeded when the job has not yet started.
473 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
474 one 'part' to write. Instead of each part being stored on disk,
475 written to DVD, then deleted from disk, all parts are written to disk,
476 and only the last is written and deleted from disk.
477 kes This patch fixes the status command to include the formating string for
478 JS_AttrInsterting. It fixes bug #1021.
479 kes This patch should fix the Mac OS X build problem on the latest
480 Darwin, where sys/types.h was not included correctly (apparently
481 due to a change in the Mac headers). The solution was to explicitly
482 ensure that it is defined for the ./configure.
483 This patch also has a rebuild of configure that includes the Debian
484 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
485 kes This patch should ensure that queued messages to the console are
486 displayed as soon as possible. It should fix bug 1007, but has been
487 reported not to work.
489 kes This patch fixes the infinite loop when trying to increase the
490 maximum number of volumes in a Pool during the add command.
491 This patch fixes bug #1008.
493 Release Version 2.2.6
495 db Remove extra data on estimate command in joblist for bat.
497 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
498 really change anything, but is the beginning of doing it *right*.
499 To do it completely right the LastWritten date must be passed to
500 the SD, but it is not yet done.
501 kes Minor tweaks to some bat restore SQL.
502 kes This patch fixes bug #1003 where putting the message output from
503 a Verify job into the catalog results in a recursive loop. The problem
504 seems to show up only with postgresql (to be verified).
505 kes Correct %x to %p in postgresql debug statement.
507 kes Fix bug #942 where lots of emails where generated when the heartbeat
508 interval was low and Bacula wanted a different tape from the one in
511 ebl Add new SD despooling attributes and Dir inserting attributes
512 job status codes in the catalog (Status table).
514 ebl Use qmake-qt4 instead of qmake when available (debian system).
516 kes Add a security warning to src/cats/make_catalog_backup.in indicating
517 that passing the password via the command line (arg 3) is insecure.
518 This responds to bug #990 (it doesn't fix it).
520 kes Set default debug_level to zero. This corrects bugs #991 and #993.
521 kes Fix a crash in bat when it cannot connect to the Director for example
522 if the Director is not running.
523 kes Remove redundant INDEX (JobId) from File table in the trunk.
525 kes Make explicit exception to GPL in LICENSE to permit linking
526 the Win32 FD with Microsoft VSS code.
527 kes Apply the Solaris package patch from
528 Masopust, Christian <christian.masopust@siemens.com>
529 kes Apply the patch to optionally add a timestamp in the debug output
530 submitted by Mariusz Czulada <manieq@wp.eu>.
532 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
533 backend (sql_strerror). Fixes bug #989
535 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
536 It applied with no problems.
537 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
539 kes Redirect stderror to stdin on mt status command in mtx-changer.in
540 since the status is returned on stderr on Solaris.
541 kes Activate Close button on tray-monitor window. This fixes
543 kes Check for NULL item in parse_conf.c before calling it. In the
544 case of Device, there is no item and this caused a seg fault when
545 Device appears in the conf file.
546 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
547 avoids pulling in config.h multiple times in some new code.
549 kes Fix spurious warning message printed when creating a volume with
550 a LabelFormat. This fixes bug #976.
552 Release Version 2.2.5
554 kes Add JobId in place of Job name in all the Jmsg() output.
555 kes Correct the APP_DESC for the Win32 storage service (remove an e).
557 kes Make maxvol-test and new more strict maxvol2-test work.
558 kes Print JobId in all Jmsg() job output.
560 kes Add new SD despooling attributes and Dir inserting attributes
561 job status codes. This fixes bug 961.
562 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
564 kes Fix doc issue. This fixes bug #963.
565 kes Fix listing performance problems in bat. Pointed out by
567 kes Remove old debug code.
568 kes Fix bat code that tests for Win32. This should fix bug #968
569 kes Query 5 list wrong Vol after migration. This fixes bug #960
571 ebl Fix #969 where user can't change Replace option in restore menu.
573 kes Save jcr in thread specific data (tsd) for each thread.
574 kes Make Dmsg() print JobId as -%u.
575 kes Make Jmsg, Emsg, and others automatically pickup the jobid
576 for the thread if it exists.
577 kes Remove old reservation debug jid code.
578 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
579 ebl Add an option that permit to specify spool size in job
580 definition. (Applying patches/testing/spoolsize_per_job.patch).
581 You must upgrade SD and DIR at the same time.
582 dvl Add new configuration item --archivedir
583 dvl Adjust regression tests to use tmp not /tmp. This will allow
584 multiple concurrent runs of the regression tests.
586 kes Fix race condition that drops final block written to volume.
587 This happens in rare cases with multiple simultaneous jobs
588 when the Volume fills. This fixes bug #964. May be related
589 to bug #935 and possibly #903.
590 kes Eliminate more strerror() and replace with bstrerror().
591 kes Remove BSD getopt and replace with unrestricted IBM version.
592 kes Fix Win32 build for changed calling sequences.
593 kes More tweaks to the mount volume routines to get everything
594 right. Changed variable name from find to have_vol, which is
595 much easier to understand.
596 kes Enhance btimer debug code.
598 kes Fix FD->SD authorization failure, which was due to spurious
599 wakeups from a pthread_cond_timedwait(). Simply check the
600 predicate before continuing. This fixes bug #953.
601 kes Add const char where needed (more to do). Remove temp debug code.
603 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
604 kes Don't overwrite error message in check_tables_version.
606 kes Unlock batch insert tables with same calls used elsewhere.
607 kes Allow starting 59 jobs a second.
608 kes Make SD session key more random.
609 kes Add retry for SQLite opening db if it fails. Probably helps
611 kes Suppress extra error messages during batch insert failure.
613 kes Add jcr to timer packets so if killed message can be sent to job.
614 kes Add JobId to all Dmsg() output.
615 kes Put some FD auth code on dbglvl rather than fixed.
616 kes Return insert attributes error message in db msg buffer to avoid
617 false error messages. Helps fix bug #966.
618 kes Separate batch init error messages. Probably helps fix bug #966.
619 kes Make SD code that contructs attribute insert check string lengths
621 kes If Dir gets an error during inserting attributes, cancel SD.
622 This reduces unnecessary error messages.
624 kes Correct search boolean for getting Volume info
625 ebl Cleanup batch insert code. Probably fixes bug #965.
626 kes Back out one small change to the reservation system (reserving a volume).
627 kes Rework how a Volume is mounted. It is now much more intelligent and
628 will always attempt to use any mounted volume if possible and reduces
629 calls to the Director asking about volumes.
631 kes Turn off some code when batch insert not enabled.
632 kes Edit FD name in connect error messages.
633 kes Rework the reservation system to take into account that the Director
634 might give us a Volume that is different from the current one being
635 used, and to ensure that we don't exceed Maximum Volume Jobs.
636 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
637 fatal error with multiple jobs running'
638 kes Add more debug code in reservation system.
639 kes Implement maxvol-test to check bug #947.
641 kes Add code to handle tray monitor separated from Win32 FD.
642 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
644 kes Add missed return in fixing verify bug -- trunk only.
645 ebl Fix a command parser issue causing a director segfault.
646 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
648 kes Increase the max block size to 4MB fixes bug #957.
649 kes ERABT if user sets min block size > max block size. Fixes bug #956.
650 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
651 is not properly mounted (recognized) during a poll.
652 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
653 Job that has differences reports Verify OK.
654 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
656 ebl Add an option to operate on all pools with update vol parameters.
657 This complete the project 20. Patch from Nigel Stepp.
658 ebl Add history support to bconsole when using readline.
659 Using Ctrl-D to exit doesn't update .bconsole_history
660 kes Modify new volume algorithm to use max MediaId for generating next
661 volume number rather than the count of Volumes. This should essentially
662 eliminate the failure rate if some volumes were deleted. Bug #921.
663 kes Begin implemention of Optimize Job Scheduling.
664 kes Implement restore callback that Dirk and I agreed on for bat
665 restore. This fixes bug #928. Restore of backup of zero files fails.
666 kes Fix SQL Catalog logging which broke with new db_escape_string
669 Release Version 2.2.4
671 kes Fix bacula_cats.def for new db_escape_string().
672 kes Increase size of name string when FD making connection to SD.
673 May fix bug #953. FD->SD connection failure.
675 kes Add code to help Dan debug 2drive-incremental-2disk test.
676 kes Add code to try to fix bug #908.
677 kes Add waits to multiple exit detection code to try to force pid
678 file to always be deleted.
679 kes Restore good dev.tar.gz to rescue set appropriate binary property.
681 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
682 trying to switch drives by checking for blocking before unblocking.
684 kes Cancel storage daemon in all cases where FD reports error. This
685 should fix virtually all cases of bug #920.
686 kes Fix db_escape_string() for MySQL which did not compile.
688 kes Fix error message that was clobbered when Dir tells SD it does not
689 have write permission on Volume. This should fix a minor point
690 in bug #942, but not the main problem.
691 kes Add code to cancel job in SD if FD connection fails. This should
693 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
694 dvl Pass jcr and db into db_escape_string() to enable better escaping
696 kes Fix migration code to get correct Volume name with multiple volumes
697 by skipping |. Fixes bug #936.
698 kes Implement patch supplied by Landon to fix bug #944 where using
699 TLS with bconsole uses 99+% of the CPU.
700 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
702 kes Move patches into patches directory.
704 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
707 ebl Using 'm' in bconsole will show messages like before,
708 and not memory usage.
709 kes Fix bug #935, and probably also bug #903 where files were not
710 restored. MediaId was not properly set in JobMedia record after
713 kes Suppress chown and chmod error messages if the FD is not running
716 kes Apply Martin Simmons' patch that should turn off the new API usage
717 when batch insert is turned off allowing building on older
719 kes Add ./configure search in qwt-qt4 for qwt package
721 kes Bacula is now free of 3rd party GPL copyrighted code!
723 kes Add guid_to_name.c/h which replace idcache.
724 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
726 ebl Detect if new PosgreSQL batch insert API is present.
727 kes Correct incorrect mempool call causing Director crash. Occurs on
728 systems without va_copy().
729 sb Update spec files for 2.2.1 release
731 kes Fix memory pool call in ua_output.c. bug #934.
732 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
733 Add test program to fnmatch.c
735 kes Integrate patch to README.vc8 from
736 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
737 edit it to get it into Unix patch format.
738 kes Implement mkpath.c to replace old FSF makepath.c
740 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
742 Release Version 2.2.1
744 kes Update POTFILES.in
745 kes Cleanup a few underquoted AC_DEFUNs in configure
746 kes Apply patch from Martin Simmons that adds a test for va_copy to
749 kes Fix bug #921 by increasing the number of tries to create a new volume
751 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
752 can be called multiple times. Implement a version for machines
753 without va_copy() that gets a big buffer.
755 kes Integrate more portable zone offset code into bsmtp.c
756 Submitted by Attila Fülöp.
758 kes Fix bad SD->FD return status reported by
759 (James Harper) <james.harper@bendigoit.com.au>
760 ebl Fix a bug in read_close_session which return random status
761 thanks to James Harper
763 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
764 and directory names during restore of single file/directories.
765 kes Add sanity checks to .sql command when string is empty. Hopefully
766 that will resolve Dirks Director crash.
768 kes Apply patch submitted by Martin Simmons that corrects a seg fault
769 in the bsmtp chat subroutine when debug is >= 10.
771 kes Fix Director crash when running bat SQL queries.
772 kes Add David's notes on Item 8: Copy pools.
774 kes Rework projects file to be current and ready for a vote.
775 kes Enhance lex scanner error message.
777 kes Tweak LICENSE file to mention BSD code.
778 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
779 if specified on the ./configure.
780 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
781 This class is intended to allow us to open a second bsock to the
782 Director while in the restore subdialog.
784 kes Fix configure to create bat Makefile before creating dependencies.
785 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
786 kes Add a tooltip to the tray monitor.
787 dvl Set the Director's PID file before dropping privs. This fixes
790 kes Update AUTHORs file
791 kes Increase the default max concurrent jobs to 20 in FD and SD to
792 correspond with the default .conf files.
793 kes Rewrite the Win32 service routines. This eliminates the 3 copies
794 some different, of the same file created by RN when porting the
796 kes Rearrange some of the Win32 directories and the placement of the files
798 kes Set DEVELOPER flag in version.h
800 ========================================================================
801 Release Version 2.2.0
803 kes Apply a second doc patch from Marc.
804 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
805 improves the tips section that discusses how to setup multiple
808 kes Update bat README file.
809 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
810 corrects a typo in the Recycle status check in db_find_next_volume().
811 This will probably fix a number of annoying problems with multiple
813 kes Modify most of dird/msgchan.c to use bsock class calls rather than
814 bnet calls -- no functionality change.
816 kes Modify the Verify output to specify if files are missing on
817 the Volume(s) or disk. Fixes confusion in bug #916.
818 kes When more than one Volume is read in a migration job, the last
819 Volume bytes reported are from the last read volume rather than
820 the last written volume. Fixed. This fixes bug #910.
821 kes Fix display of Recycle flag after update volume=foo recycle=yes.
822 It previously printed New Recyle flag is: no. This fixes bug
825 kes Correct seg fault when switching tape drives during restore.
826 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
827 be used until after 2.2.0 release.
829 kes Remove fnmatch() in SD that permitted wild card specifications.
832 kes Fix %g in filename returned by SQL for browse tree reported by
834 kes Fix configure so that it puts config.out in the cwd rather than
836 kes Attempt to fix the locking problem reported by Eric in bug #906.
837 kes Make berrno class to leave errno unchanged after constructor call.
838 kes Make bnet_server use the heap rather than the stack to allocate
839 its socket fd pointers to avoid a crash at termination. Problem
840 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
842 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
843 and putting it in depkgs-qt along with Qt4.3.
845 kes Rework code in acquire.c that switches drives for reading when
846 the Media Type does not match. This should fix bug #906
848 ebl Fix a director segfault during job setup #907
849 kes Correct seg fault in postgresql when first operation returns no
850 rows. Fixes Dirks File browser problem seg fault with bat.
852 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
853 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
856 kes Implement PopUp YES/NO dialog for bat.
858 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
860 kes Correct RunScript to terminate job in FD on failure.
861 kes Change abort_on_error and AbortJobOnError to fail_on_error
862 and FailJobOnError in RunScripts.
863 kes Minor tweaks of code formating in RunScripts, principally to
864 avoid depassing 80 columns.
866 kes Eliminate one #ifdef Win32 in bsmtp
867 kes Implement grow tool to grow a file for testing very large databases.
868 kes Add big-vol-test to test Bacula seeking with > 5GB.
871 kes Modify find_next_volume() to return all values in Media record.
872 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
876 kes Update Release notes
878 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
879 Warning, in previous beta version, all media get from scratch keep their
882 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
883 This should fix bug #842. Made a note to look at removing the temp
884 files at the end of the install.
885 kes Add ability to mount and unmount a file device providing it is
886 marked as being removable and has the appropriate mount and unmount
887 commands defined in the Device resource. This fixes bug #830.
888 kes When applying a storage override, release all previous storage
889 definitions rather than just prepending the new storage.
890 This should prevent a good deal of confusion.
892 kes Implement ./configure search for qwt libraries.
894 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
895 Win32 FD. This should fix bug #893.
896 kes Remove an unnecessary beep in Win32 init code.
897 kes Update copyright dates in Win32 executable about boxes.
898 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
899 code with a BSD getopt.c and getopt.h.
900 kes Remove sched.h from the Win32 compat directory -- not used.
901 kes Remove the Exit menu item from the Win32 tray monitor. If you really
902 need to shut it down, do it through the services panel or the command
904 kes Remove some inappropriate Bacula FSFE copyrights.
905 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
906 kes Fix regress config non-portable test as pointed out by
907 Florian Heigl <florian.heigl@gmail.com>
908 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
909 as pointed out by Florian Heigl <florian.heigl@gmail.com>
911 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
912 Reported by Frank Sweetser.
916 kes Fix client-only build.
917 kes Integrate client-only fixes for bsys (initgroups) and conio from
918 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
919 kes Make arguments to get_scratch_volume() in same order as other
921 kes Rework the prune_volumes() subroutine so that after purging and
922 no volume found in desired pool, it will check for a scratch
923 volume. This prevents recycling the whole scratch pool.
924 kes Add code to status storage to print boffset_t (largefile support).
926 kes Move qwt (Graphics libarary for Qt4) to depkgs.
927 kes You now need a --with-qwt=<dir> to be able to build bat.
928 kes Update src/win32/cats/bacula_cats.def to include the new
929 db_get_query_dbids() call on Win32.
931 kes Correct a problem when selecting a scratch volume and moving
932 it to another pool that lost some columns.
933 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
934 kes Enhance Autochanger error messages to include Volume and device name.
935 kes Rework prune_volumes() code to take account of InChanger flag,
936 and to handle recycling volumes going to the Scratch pool and
937 current pool because the RecyclePool directive.
938 kes Implement a better and more efficient db_get_query_dbids() to
939 handle creating and passing back a list of DBIds.
943 kes Start work on new more efficient DBId subroutine. First use
944 will be for recycling volume to Scratch inchanger.
945 kes Increase number of JobIds in pruning from 1000 to 10000.
946 This to be replaced by above routine.
947 kes Begin implementation of building Qt4 on Win32.
948 kes Correct typo in fix I added for bad TLS shutdown.
949 kes Pull 2.0.3 patches into patches directory.
950 kes Update Release notes. Include qt-console in line count.
951 kes Update Projects file.
953 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
954 bug in migration code where a job that spanned two volumes
957 kes Implement new BST_DESPOOLING blocked state. Change from locking
958 during despooling in SD to blocking. This means that other threads
959 can work with the device structure, in particular the reservations
960 system while despooling.
962 kes Fix return in reservation message queue that missed clearing
963 the jcr lock (implemented 26Jun07 below).
964 kes Rename a number of dev methods to make locking function names
966 kes Document locking in lock.c. Move lock structures to new file
969 kes Move reservations message lock to lock jcr only this
971 kes Move main SD locking code into lock.c (new file).
972 kes Update Win32 build to include lock.c
976 kes Dirk committed the qwt library code for drawing graphs in bat.
977 kes Tweak install of qwt so that it is integrated with ./configure.
979 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
980 out by Eric (my typo).
981 ebl Fix configure.in to get batch mode enable
982 kes Return correct string from authenticate.cpp in bat when connecting
984 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
985 spurious line drops when using TLS.
986 kes Do not file reparse points when restoring a file that already
989 kes Implement Windows reparse points -- similar to directories, but
990 we do not descend into it. This is a first cut. They seem to
991 be backed up, but restore is not yet tested.
992 kes Remove restore_blocking in tls code when shutting a socket to leave
993 it in blocking mode. Hopefully this will fix the encryption bug
994 reported by Frank Sweetser.
995 kes When opening a file for backup, tell the OS that we are going to
996 read it sequentially -- optimization.
997 kes Change variable names in authenticate_director() to not conflict
998 with member names in bat. Caused great confusion with compiler,
1001 kes Queue openssl error messages in case of comm problem.
1002 kes Do shutdown() call if socket terminated.
1003 kes Remove some duplicated code in tls.c
1004 kes Move more of the bsock member variables into private and access
1006 kes Add Frank Sweetser's tls-test to the regression suite.
1008 kes Add Swedish sv.po file
1010 kes Don't print clock skew message in FD if less than 3 seconds diff.
1011 kes Add a bit of VSS info to status client.
1012 kes Implement a first cut of Vista VSS, using Win2003 code.
1014 Release: 2.1.20 beta
1016 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1017 loaded tape but uses first drive).
1018 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1019 This was indeed a Win32 issue.
1021 kes Simplify search of autochanger for in-use Volume.
1022 kes Fix exit condition of check for in-use volume. kes Remove
1023 inappropriate my_postgresql_free_result() in db_close()
1025 kes Fix bad return in FD when encryption signature not found.
1026 Probably caused a crash.
1027 kes Inhibit missing encryption signature error messages for
1028 file types where no signature computed.
1029 kes Correct inverted check on autochanger in reservation system.
1030 kes Tweak debug code in autochanger reservation.
1032 kes Add some additional locking in the cats directory in subroutines
1033 that modify packet variables called from batch insert.
1034 kes Rework how dcrs are allocated. new_dcr() can now be called
1035 with an existing pointer, and it will simply clean it up.
1036 This allows the reservation system to test various different
1037 devices, and will permit easy device changes.
1038 kes A bunch of changes all over to handle new new_dcr() calling
1040 kes Work more on the Volume management in the SD. Remember Volumes
1041 for tape drives and for autochangers (even virtual disk changers).
1042 kes When looking at the Volume list to reserve a drive, handle
1043 autochanger names correctly by interating through the changer
1044 devices. Also call the Director to see if a Volume is suitable
1045 for the current job.
1046 kes Fix some bugs in bscan. Make sure all media records are written.
1047 Make sure that valid JobMedia records are written for disk files.
1048 Previously they were completely wrong.
1049 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1050 that the URLs don't change and so that the developers will all
1051 work off the same copy. Rebuild from scrach.
1052 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1054 Release: 2.1.18 beta
1056 kes Fix seg fault in FD from incorrect digest size.
1057 kes Fix argument to non-OpenSSL crypto.c subroutine.
1059 Release: 2.1.16 beta
1061 kes Remove a few malloc()s from the encryption code.
1062 kes Use the class calls to bsock in filed/backup.c and restore.c in
1063 place of the old bnet_xxx code.
1064 kes Implement code that does an on the fly calculation of the
1065 signing digest during restore of encrypted files. It makes
1066 a best guess at the algorithm, and if it is not correct, will
1067 then revert to the old code which reads the file after it is
1069 kes Implement at least one missing crypto stream in stream_to_ascii()
1070 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1071 #877 where a reload with bad syntax causes Dir to exit.
1073 Cut: 2.1.14 beta (not released)
1075 kes Do not free a volume on a tape drive until another volume is
1076 mounted and read, or the autochanger unloads the volume.
1077 This should help the SD re-use volumes that are already mounted,
1078 and should fix bug #886.
1079 kes Apply patch from user brettedgar that allows gnome2-console include
1080 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1081 kes Apply patch from Lucien Weller that fixes day of week calculation
1082 because of DST flag problem. Fixes bug #887.
1084 kes Move find_next_appendable_volume() to after acquiring a valid device
1085 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1087 kes Unable to reproduce bug 872. However added additional testing for
1089 kes Bug #874 resolved by documenting SQLite limitations.
1090 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1091 kes Bug #881 resolved by removing typo in mtx-changer script.
1092 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1093 approval. Added a link to the wiki on the web page, and implemented
1094 a backup from http://paramount.ind.wpi.edu
1096 kes Fix update allfrompool to pass pool name.
1098 kes Convert to pure GPL v2 license.
1099 kes Fix sscanf problems reported by Peter Buschman that caused
1100 a bus error on Solaris.
1101 kes Rework (simplify) the select prompt in bat.
1102 kes Move get_jobid_from_tid() into lib and create a
1104 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1105 should definitely fix the problem of lost error messages in the
1107 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1108 kes Eliminate tcpd.h from the project. Enclose the #include from the
1109 library with extern C ...
1110 kes Add print of signal name when a signal is trapped.
1112 Release: 2.1.12 beta
1114 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1116 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1117 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1118 makes SQLit3 run 30 times faster, though a bit less safe.
1119 kes Implement --with-batch-insert in configure and detection of thread
1120 safe libraries. It is on by default, but turned off if no thread
1121 safe library (e.g. SQLite 2) is available.
1123 kes Fix Bacula PostgreSQL buffer overruns.
1124 kes Do better checking for NULL results returned from PostgreSQL;
1125 implement retry for failed queries; clear results buffer after
1126 failed query. Hopefully this will correct the PostgreSQL failures.
1128 kes Implement algorithm to handle only one appendable volume with
1129 Prefer Mounted Volumes = no.
1130 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1131 returned from a query.
1132 kes Make volume lock recursive.
1133 kes Implement an additional volume reservation algorithm that
1134 starts by considering all reserved volumes then uses the
1135 old brute force algorithm of searching the resources to
1136 find a suitable device.
1137 kes Add new reservations debug code and refine the old code.
1138 kes Update the win32/dll/bacula.defs file.
1140 kes Tweak reservations algorithm to permit a few more cases, i.e.
1141 volume reserved, but on different drive, ...
1142 kes Enhance SD status to include Pool and Media Type for drive in a
1143 more readable format (a bit longer).
1144 kes Fix PostgreSQL double free.
1146 kes Minor refactoring of restore decryption code.
1147 kes Add code to smartall.c to detect double free of a buffer.
1149 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1150 so that bsmtp will create a correct email address (mailbox only).
1151 kes Modify 'memory' command so that the buffers are listed as 'In use'
1152 to avoid confusion with Orphaned buffers.
1153 kes I reworked the OpenSSL include/lib flags to be handled in
1154 the standard Bacula way, which should fix bug #863 concerning
1155 non-standard OpenSSL libraries.
1157 kes Implement Help Browser window for bat.
1158 kes Fix reload bug that reset StorageId to zero.
1160 kes Fix TLS #ifdefing when TLS turned off.
1161 kes Ensure that when labelling a tape with Slot=0 that InChanger
1163 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1165 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1166 add DISTINCT (required by PostgreSQL).
1167 kes Implement BSOCK authenticate_director() method. Eventually will
1168 authenicate all daemons.
1169 kes Move several more functions into the BSOCK class.
1171 kes Add code to tell the OS that we no longer need a cached
1172 file that we were reading. In findlib/bfile.c. Also,
1173 only cache files that we are reading. Thanks to
1174 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1175 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1176 kes Implement script to automatically generate cats and dll .def
1177 files for Win32 dll.
1178 kes Update README.mingw32 to include new .def file generation.
1179 kes Correct typo in UTF-8 error message as reported by:
1180 jhernandez <julianhernandez@gmail.com>
1181 kes Add additional sm_check() code on debug level 1.
1182 kes Set default debug level to 1.
1183 kes Trap SIGABRT in attempt to get traceback.
1185 kes Reduce bat connect timeout from 30 to 15 seconds.
1186 kes More restructuring and implementing BSOCK class in place of
1188 kes Remove a few unnecessary malloc() tests in crypto code.
1189 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1190 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1191 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1193 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1195 kes Fix Verify InitCatalog. The attributes were not pointing to the
1196 correct saved location.
1197 kes Implement message callback so that GUI is sure to get all
1198 daemon messages. Currently displayed in a dialog in bat.
1199 kes Ignore SIGUSR2 (Bacula timer) in bat.
1200 kes Apply regress patch from bug #859 to allow regress to work
1201 with Solaris compiler.
1203 kes Begin adding TLS support to bat.
1204 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1205 clean up lex.c and make it more readable.
1207 kes Move more bnet functions into the BSOCK class.
1208 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1209 kes Complete change of berrno strerror() method to bstrerror()
1211 Release: 2.1.10 beta
1213 kes Cleanup incorrect email addresses in bsmtp.
1214 kes Make bat display initial messages rather than discard them.
1216 kes First cut of adding .mod to the run command.
1217 kes Implement auto display of messages in bat.
1218 kes Enhanced preferences to allow all Bacula output to be
1221 kes Try to make bsmtp date routines more generic.
1222 kes Fixed bug #856 autochanger documentation.
1223 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1224 kes Add new cats entry point so Win32 builds.
1226 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1228 kes Do better checking for the MySQL 64 bit libraries looking for both
1229 .a and .so libraries.
1230 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1231 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1232 kes Require the thread safe version of MySQL during configure. Thanks
1233 to Andre Noll for pointing this out.
1234 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1235 continuing in migration code.
1236 kes Apply implementation of tray-monitor font derived from gnome-console
1237 submitted by Andreas Piesk <a.piesk@gmx.net>
1239 kes Eliminate important memory loss in SQLite
1240 kes Fixed the batch insert MySQL thread specific data that was not
1241 being freed. See cats/mysql.c:db_thread_cleanup().
1242 kes Fix restore before command.
1243 kes Convert old hdr.name to name() in a few places.
1244 kes Implement update jobid command.
1245 kes Return all time_t dates in db_get_job_record()
1246 kes Stop watchdog in SD earlier.
1247 kes Put Pool just after Storage in please mount message.
1248 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1251 kes Update the po files.
1252 kes Fix Verify InitCatalog by making it cache attributes.
1254 kes Change name bacula-bat to bat for man 1 page to correspond to
1256 kes Check for client and store NULL pointers in status command. This
1258 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1259 kes Fix sign extended editing of %p.
1260 kes Clean out a little old #ifdefing in cats/mysql.c
1262 kes If time diff between DIR and FD is more than 600 seconds convert
1263 INFO message to WARNING.
1264 kes Implement heap size display in status for all daemons.
1265 kes Attempt to fix MySQL db open memory loss (not successfull).
1266 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1267 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1268 Query. This looks like a MySQL but but by doing extra releases,
1269 the memory goes away. This should fix bug #847.
1271 kes When backup fails, cancel SD before waiting for sd termination.
1272 kes If SD is waiting for FD to connect during cancel, wake up the
1274 kes Fix fsf code so that errno is correctly reported.
1275 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1277 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1278 so that Bacula doesn't later stumble into a seg fault.
1279 kes Use the term Restore Client in the restore Job report.
1280 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1281 the original job's FileSetId.
1282 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1283 spooling in migration jobs. Not yet tested.
1284 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1285 reading conf file from a pipe. However, do it with open_bpipe()
1286 rather than popen. Not yet tested.
1288 kes Fix an ugly bug where the VolCatBytes were getting updated
1290 kes Implement bconsole memory command that prints current memory
1291 usage, plus smartalloc dump.
1292 kes Clarify some error messages in backup, admin, and migrate.
1293 kes Shrink label dialog to smaller size.
1294 kes Invert Cancel OK buttons on restore to be OK Cancel.
1295 kes More strerror() to bstrerror() conversions.
1297 kes Start implementing bstrerror() in place of strerror().
1298 kes Stripping path -- seems to work.
1300 kes Prevent door and port files from being restored (mostly
1302 kes Free an unreleased buffer in compat code.
1303 kes Change console Job name from *Console* to -Console- to eliminate
1304 Win32 filename problems. Put Win32 path separator when creating
1305 Console file. This fixes bug #846.
1306 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1308 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1310 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1311 to force Win32 error message.
1313 kes First cut strip path. The data should be passed to the FD,
1314 but nothing is done with it yet.
1315 kes Enhance the digest and signature routines in the crypto
1316 library to accept a JCR and to use it to print error messages
1317 so that they will go in the Job report rather than the daemon's
1319 kes Simplify some of the verify signature code.
1320 kes Simplify a few of the alternative returns in the signature
1323 ebl Use only POSIX regex instead of GNU regex in breg.c for
1324 File relocation. It fix broken freebsd compilation.
1325 kes Convert all other Dir files to use new ua class message
1327 kes Tentative fix for missing digest signature in bug 807.
1328 kes Correct handle problem in new win32_ftruncate routine.
1329 kes Convert ua_purge.c and ua_update.c to use new ua class
1330 message routines for bat.
1332 kes Correct incorrect installation of LICENSE in Win32 installer.
1333 kes Display LICENSE at the beginning of the Win32 install.
1334 kes Attempt to correct the need for the png files to be installed
1336 kes Reapply my bat.conf install script in qt-console. I think I
1337 editted bat.pro instead of bat.pro.in and it was lost.
1338 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1339 the /var/lock/subsys for subsysdir. Also corrects typos in the
1342 kes First cut update job.
1343 kes Correct configure to include qmake of src/qt-console directory.
1345 kes Make restore job yes/mod/no print in one command so GUI works.
1346 kes First cut implementing backup and restore client.
1347 kes Correct editing in Verify output that caused a seg fault.
1349 kes Insure that bat.conf is not overwritten during installation.
1350 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1351 while I was implementing migration in March 2006 !
1353 ebl Cleanup file relocation, using char *RegexWhere instead of
1354 char *where + bool where_use_regexp
1355 kes Update some manpages and add bat manpage.
1356 kes Make a first cut at converting bacula.spec.in for bwx-console
1358 kes Apply patch from John Goerzen to add hostname as fourth argument
1359 to make_catalog_backup script.
1360 kes Fix typos I introduced into bsmtp.c
1361 kes Make pm_strxxx() routines handle input of NULL pointer. This
1362 is to protect from NULL pointers returned from SQL databases.
1363 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1364 kes Add more debug to FIFO code -- fix fifo regression test.
1366 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1367 kes Add thread timer to bnet_connect() to break from OS if wait time
1370 kes Update Win32 build to include new files, new symbols, and
1372 kes Implement socket level heartbeat (tcp_keepidle)
1373 ebl Commit File relocation patch
1374 kes Make bat have 'make install' target.
1375 kes Warn during install if old gnome-console binary found.
1376 kes Warn during install if old wx-console binary found.
1377 kes Add -8 option to bsmtp command line to add content type utf-8.
1378 Fixes bug #809. (Character coding problem in bsmtp).
1379 kes If < is found in target (from, to, cc) then do not enclose the
1380 target in < > in bsmtp. Fixes bug #772 (malformed address).
1381 kes When printing certain items in dbcheck, stop after 300000.
1382 Fixes bug #822. (dbcheck loops).
1383 kes Incorrect status in Dir after waiting for mount with poll set.
1386 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1388 kes Print waiting to reserve a device every 5 mins.
1390 kes Don't call close_part in label.c if tape and relabel.
1391 kes Don't free volume if busy in close() -- should help with
1393 ebl Fix #824 RunScript bug (After script could be execute twice)
1394 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1395 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1396 Add a regression script to test RunScript
1398 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1401 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1402 deprecated. No additional bugs will be fixed, and they will be dropped
1403 in a future release (probably 2.4.0).
1404 kes Change name of wx-console to bwx-console to make it more Bacula
1406 kes Change the name of gnome-console to bgnome-console to make it
1409 kes Some time in March, a Feature Request with patch from Jorj Bauer
1410 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1412 The ability for the director to validate a Client (FD) CN against
1413 an arbitrary set of patterns rather than the hostname, with
1414 A new 'TLS Allowed CN' set of directives which are implemented
1415 in the Client resource. Then pattern matching is used in place
1416 of hostname matching against the Certificate's CN. As an example, we
1417 have certificates which (a) use a local CA, and (b) have a CN of the
1419 kes Add new/changed entry points to Win32 build
1420 kes Create unaccepted-projects for projects that are not accepted.
1421 kes Simplify locking in the reservations system.
1422 kes Add more debug code in reservations.
1423 kes Make sure error condition on reserving a volume is handled correctly.
1424 kes Correct handling of volume_in_use.
1425 kes Correct handling of initializing a device.
1426 kes Move handling of broadcasting releasing a device into release_device().
1427 kes Correct attaching dcr to dev so that it is only done if device
1428 is properly initiated.
1430 kes Locking debug level tweaks in SD.
1431 kes Tweak new Volume code.
1433 kes Add exec external-command [wait-seconds] to bconsole. This
1434 executes the external-command. Note! normally external-command
1435 should be enclosed in double quotes.
1436 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1437 it should normally be off in a production system.
1439 kes Implement die command for SD so that we can force it to dump.
1440 kes Implement SD lock debug code.
1441 kes Implement new algorithm for keeping Volume list in SD. It
1442 is now owned by the device.
1444 kes Implement new code for freeing in use volumes that should
1445 resolve if not all, some of the problems of multiple drive
1446 tape conflicts described in bug 801.
1448 kes Fix gui/bacula-web/images files in svn.
1449 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1451 ebl Fix a bug in batch mode (in string escape)
1452 kes Correct migration prune SQL typo that crept in in a
1453 recent 2.1.x change.
1455 kes Move bnet_despool() into class in bsock.c
1456 kes Modify job report to include director name and Build OS.
1457 kes Move drop root privilege and check_catalog() before fork.
1458 kes Add update database scripts (version 9 to 10) to updatedb directory.
1460 ebl Check size and age of each file after its backup to see if
1461 it has changed during backup, if 'checkfilechanges' is set.
1462 The FD will do an extra check (stat(2)) after
1463 each file backup. mtime, ctime and size are compared with
1464 'before backup' information. If time or size mismatch, an
1465 error message will be generated. You must upgrade FD to use it.
1467 kes Make database name and user configurable
1468 --with-db-name=xxx --with-db-user=xxx
1469 kes Add back database type to message.c for debugging.
1471 kes Implement dir_sql() which issues an SQL query.
1472 kes Modify bat medialist to use dir_sql() and do some minor C++
1473 formatting as well as eliminating a number of pointers, simplifing
1476 kes Fix some of the mtx-changer grep commands for tape label readers.
1477 kes Convert a number of bsendmsg into the appropriate send/warning/error
1478 message class calls.
1479 kes Suppress the using database message in the .sql command.
1480 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1482 kes Add context menu for floating a window.
1483 kes Some minor cleanup and name changes in qt-console
1484 kes Add doing mt setblk 0 in Win32 mtx-changer.
1485 kes Apply Martin's bug fix to move definition of ENODATA for
1487 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1488 sqlite2 and sqlite3.
1490 kes More pruning cleanup.
1491 kes Turn on wait_for_drive by default in mtx-changer.
1492 kes Turn on Batch insert code by default as it now passes regression.
1493 kes Add ./configure --enable-bat to enable building of Bat.
1494 No install yet though.
1496 kes Implement a new .sql command for bat.
1497 kes Implement code to turn off pruning in obtaining the next volume.
1498 Pruning is turned off for the status dir command, but turned on
1499 for SD requests and for the list nextvolume command.
1501 kes Correct Qmsg() that was not updated correctly when committing a
1502 previous change (probably the recent TLS patch).
1504 kes Write new subroutine is_volume_purged() that explicitly checks
1505 if the Volume is purged, and if so marks it as such. This should
1506 resolve problems reported about needing to mount twice to recycle
1508 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1509 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1510 amount of duplicated code.
1511 kes Do volume pruning only for the Media Type desired (reduces pruning time
1512 if multiple Media Types are in the same pool).
1513 kes Implement more detailed info in the Job report for the Bacula version
1515 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1517 ebl Add bbatch tool to bench database and insert mode.
1518 Fix sql quote stuff in batch mode
1519 Fix sql stuff for mysql
1521 kes Correct problems with am/pm scheduling. Fixes bug #808.
1522 kes Implement new prunning code that prunes up to 1000 jobs at
1523 the same time. The same technique can be applied to a number
1524 of other prune/purge subroutines.
1525 kes Add an insanity check when starting a new tape job to ensure
1526 that the tape position has not been changed. If so fail the
1528 kes Fix Win32 build for dlls to add the folllowing:
1529 src/lib/bsock.c -- new file with new entry points
1530 src/lib/dlist.c -- new entry points
1531 src/cats/sql_create.c -- new entry point
1532 src/cats/sql_cmds.c -- new DATA item exported
1534 ebl batch mode cleanup bscan-test is ok now.
1535 kes Implement SD code to check length of disk volume before appending.
1537 kes Correct return status on db_batch... routines.
1538 kes Add call to db_write_batch_file_records() to migration code.
1539 ebl Fix AfterJob timing
1540 kes Move the checking of the database in initializion of the Director
1541 to after we drop privileges. This avoids the need for both root
1542 and bacula access to the DB.
1543 kes Correct a misplaced variable definition in src/filed/backup.c
1544 kes Correct how the new batch insert db_create_attributes_record()
1545 uses the arguments. Caused a seg fault in bscan.
1546 kes Implement lock() and unlock() methods in DEVICE class.
1547 Implement block() and set_block(xx) methods in DEVICE class.
1548 kes Modify bnet_connect() so that it uses time() to check for the
1549 wait time expiring (on some OSes, some system calls may not
1550 return immediately).
1551 kes Modify Verify to obtain the previous JobId when it is actually
1552 running rather than at schedule time (as it was in 1.38.x).
1553 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1555 kes When checking pid in pid file, continue running if the pid is
1556 the same as ours. This occurs on IRIX after a system crash.
1559 kes Extend new GUI API.
1560 kes Make the ua structure a class, and implement send_msg(),
1561 error_msg(), warning_msg(), and info_msg().
1563 kes Apply fix from for building wx-console on the Mac from
1565 kes Implement new select mechanism for GUI programs.
1566 kes Reorganize initialization of stackedWidgets in bat.
1568 kes Add updated nagios plugin supplied by Christian Masopust.
1570 kes More bat implementation.
1571 kes File migrate bug with Pool Occupancy using mediaid instead
1572 of jobids. Fixes bug #795.
1573 kes Fix orphaned buffers in filed backup and verify due to
1574 crypto buffers not freed during errors. Fixes bug #789.
1575 kes Extend new GUI api code to tree commands.
1576 kes Ensure that tree and dot commands check console ACLs.
1577 kes Permit marking directory with trailing slash.
1578 kes Allow 20 console connections (instead of only 10).
1580 kes Add smartctl call to bacula-sd.conf as an example of getting
1583 kes Modify jobq.c to let simultaneous restore jobs run. This may
1584 cause them to fail if they cannot get a drive.
1585 kes Add Client Connect Wait to Storage daemon to permit users to
1586 modify the time the SD waits for a FD connection.
1588 kes Correct virtual changer check which was backwards. This caused
1589 volumes to be unloaded into slots already occupied.
1591 kes Apply Command ACL filter to JobId list in restore command.
1592 kes Correct typeo in var.c patch.
1594 kes Don't let Bacula prune File or Job records for the current Job.
1595 kes Fix variable substitution pad + inc bug reported (with patch)
1598 kes Correct SQLite log table index as reported by Luca Berra.
1600 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1602 kes Begin implementing new comm signals for API.
1603 kes Fix a few places in lib/message.c where the open fd may
1605 kes Continue implementing lib/bsock.c (real class). Make jcr,
1606 who, host, and port private. There are new methods to access
1607 them for non-class use. This required touching a number of files.
1609 kes Add LANG=C to autoconf/randpass so it works with languages other
1610 than English. Fixes bug #788.
1612 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1614 You will not be able to generate Include/Exclude list any more.
1615 It will be fixed soon.
1616 If you want to use this, you can apply
1617 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1619 kes Restore of sockets created false error messages because Bacula
1620 no longer restores sockets, but the code was still trying to
1621 set the attributes on a non-existent file. Reported by a user.
1622 ebl finish RecyclePool feature
1623 Media will takes Pool.RecyclePool
1624 when moving from Scratch to a Pool or when user will do
1625 update volume=xxx frompool
1626 To use it, add RecyclePool = aPool to your Pool resource
1629 RecyclePool = Scratch
1633 kes Expand new BSOCK class adding signal() and new BNET signals.
1634 kes Begin enhancing the dot commands adding a new API function
1635 that returns more information and will make it easier
1636 to interface to the Director from a program.
1638 kes Make DEVICE fd private. Its new name is m_fd, and can be
1639 obtained with dev->fd() outside the class. This is the
1640 first of many DEVICE members to be made private.
1641 kes Implement Michael Renner's idea on having a virtual disk
1642 changer. I made some minor modifications (e.g. I did not
1643 implement the Virtual Changer directive, but simply set
1644 the Changer Command to an empty string.
1646 kes Implement a BSOCK send() method that writes the whole record
1647 in a single write() request rather than in two.
1648 ebl add update volume=xxx recyclepool=yyyy
1649 volume takes recyclepool from pool when using update volume=xxx from pool
1651 kes Fix encryption deblocking bug, which caused some restored files
1652 to be truncated. This fixes bug #763.
1653 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1654 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1656 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1657 ebl Use btime_t instead of uint64_t in media patch.
1659 kes Optimize the use of the database a bit in the Status dir command.
1660 Only open it when needed, ensure that if any previous database
1661 was opened, it is closed.
1663 kes Correct VolCatBytes bug from media patch.
1664 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1665 in the case of orphaned records.
1666 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1667 and File records in 300K chunks to be more efficient. This
1668 idea came from Juan Luis Frances (if I remember right).
1669 kes Apply Eric's scratch patch that moves a purged Volume to
1670 the RecyclePool. Question: how is RecyclePool set? what
1671 happens to the ScratchPool?
1672 kes Apply Eric's media patch that collects read/write media
1673 times as well as byte counts. This patch requires a
1674 simultaneous upgrade of the DIR and SD. Note, there
1675 should be some way to turn off timing. I'm not sure
1676 times are in Bacula units.
1677 kes Apply Eric's batch-insert patch.
1679 kes Update projects list.
1681 kes Implement Include/Exclude file lists in FD as dlists using
1682 the new dlistString class. This permits efficiently having
1683 large include/exclude lists and completes project Item 25.
1684 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1685 console is authorized to cancel the job. This fixes bug
1687 kes Modify SD so that the VolCatJobs medium record is updated
1688 at the beginning of a Job rather than the end. This
1689 fixes bug #775 where exceeding MaxVolJobs caused jobs
1691 kes Added a mutex around getting and setting Volume information
1692 so that multiple simultaneous jobs will single thread.
1694 Switch to using Subversion
1695 kes Remove src/pygtk-console/ from configure
1697 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1698 plus the entrypoints.
1699 kes Apply patch supplied that corrects debug print
1700 in canceling jobs for max run time. Supplied as
1701 part of bug #621, which was previously fixed.
1703 kes Test on job_canceled() and sd_msg_thread_done inside
1704 loop starting the message thread to avoid a race condition.
1706 kes Remove rl_catch_signal from console.c as it conflicted
1707 with the header definition. Fixes bug #765.
1708 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1710 kes Clarify some stored/acquire messages to indicate if the
1711 problem is with read or append.
1713 kes Fix memory leak with storage ids in cats/sql_get.c
1714 kes Terminate watchdog earlier to avoid reference to released
1715 memory -- reported by Jason Austin.
1716 kes Move closing the database from jobq.c to the director daemon
1717 termination routine. This fixes memory leaks for shadow jobs
1718 (i.e. migration jobs).
1719 kes Free up the unique jobid chain items in migrate.c. This fixes
1720 a memory leak problem.
1721 kes Convert some ugly looking for statements to use foreach_alist
1722 in findlib/find.c. This will facilitate converting the structures
1723 to use dlist (for large include/exclude lists).
1724 kes Fix a bug in the btree.c and btree.h routines, then rename them
1725 rblist and add them to be built in src/lib. Include some new
1726 methods written by Rudolf Cejka that make the code more readable
1727 (hides some of the ugly casting).
1728 kes Add set_next() and set_prev() methods which make the code much more
1729 readable. Also add a new dlistString class that facilitates storing
1730 strings in dlists. To be used in the large include/exclude lists.
1731 kes Make some trivial modifications to lib/tree.h that use rblist
1732 rather than dlist for storing the tree links. This was suggested
1733 by Rudolf Cejka. The result of this is that the restore tree now
1734 uses red-black binary trees rather than simple linked lists. This
1735 should give rather dramatic speed improvements for directories
1736 contining large numbers of directories/files (more than 10000).
1738 kes Fix maxruntime bug #621.
1740 ebl Implement the include JobID in spool file name project.
1741 kes Reorder projects file in order determined by Jan 2007 vote.
1742 kes Implement item #12 on project list -- quick release of FD by
1744 kes Fix open of SQLite3 db where user does not have write permission
1745 so that DIR does not crash. Fixes bug #761.
1747 kes Add back missing @ in Win32 Makefile.
1748 kes Change 'Device not configured to autolabel' from INFO
1750 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1751 which should restart an indefinite # of times.
1752 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1753 other DIR specifications.
1755 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1756 Fix path quoting in SQLite scripts.
1757 Fix problems with SHGetFolderPath.
1759 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1761 kes Fix Job restart on error bug that promotes an Inc to a Full
1762 backup. This should fix bug #755.
1763 kes Add qt-console and first cut of code.
1767 kes Fix Bacula->Documentation link on Win32 to point to index.html
1768 instead of bacula.html. Fixed bug #750.
1769 kes Return JobId in db_get_job_record() when JobId==0. This should
1771 kes Do not release source pointers when restarting a failed job.
1773 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1774 This *should* fix bug #747.
1775 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1778 kes Modify USTORE constructor to set an empty store_source string,
1779 and don't copy the store_source string in a cancel. Hopefully
1780 this will fix Arno's seg fault, bug #744.
1781 kes Add back code to disable conio in configure. Fixes bug #743.
1782 kes Correct the Options scanner in the FD to correctly handle
1783 SHA1 option, which was eating the next option. Reported by
1785 kes Add code to indicate when the SD is spooling, spool wait, and
1786 despooling as requested by Alan Brown.
1788 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob