1 Technical notes on version 2.3
5 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
7 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
9 kes Add DataDespooling and DataCommitting status (committing is
11 kes Finish implementation of new reservations code noted below.
13 kes Fix bsnprintf for float point numbers. I broke recently when
14 parameterizing some variables. This fixes bug #1036.
15 kes Undo recent reservations changes ... will apply them later
16 when they work better.
18 ebl Fixes #1034 which cause mysql to hang the connection after 8h
19 ebl Change default statistics target of filename.name and path.path
20 fields for PostgreSQL. This speeds lookup by indexes. Thanks
22 kes A few more tweaks to new reservation code. Make sure to clear
23 vol released flag when retaking volume. When reading label and
24 label is bad mark volume unused. When recycling, mark volume
25 unused so it can be renamed.
27 kes Fix reserve_volume() so it doesn't release a volume in use
28 (i.e. a volume entry not marked released). This should be
29 the last part needed to fix bug #1018.
31 kes Move Heartbeat documentation from Job to Director resource.
34 kes Fix existing switch drive SD code to call autochanger to release
35 any old volume. This must be done to keep the autochanger from
36 releasing subsequently newly reserved volumes in doing a close().
37 This should fix bug #1018.
38 kes Fail if attempting to get console input in batch mode. This
39 should help fail RunScript console commands that are incomplete.
40 kes First cut implementing switch_drive() in SD (not actually called).
42 kes Implement first cut running console commands in a RunScript.
44 ebl Fixes bug #1028 where "Selection Type" option was not usable
46 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
51 kes Add new free_tls() entry point so that Win32 builds.
52 kes Fix compile warning in src/lib/util.c
53 kes Fix entry point for edit_job_codes() so that Win32 builds.
54 kes Fix seg fault Frank Sweetser reports in regression testing
55 on his systems. The problem was that the original author of
56 bsnprintf.c did not take into account the side effects of
57 using ++x in the argument to a #define.
58 kes Make SD protocol backward compatible with version 2.2.x.
60 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
61 because Bacula no longer restores sockets.
62 ebl Always use ignorecase fileset option on win32 FD.
64 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
65 that implements double quoting include names in conf files,
66 and also allows piping input by having the first character
67 be a vertical bar (|).
68 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
69 that implement %f in RunScripts to pass the FileSet name.
70 kes Skip leading | when lex input comes from a pipe as suggested
71 by Michael Stapelberg <michael@stapelberg.de>.
73 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
74 Nerijus Baliunas <nerijus@users.sourceforge.net>
76 kes Implement Plugin Directory and plugin events.
78 kes Implement a security enhancement: TLS authentication but no
79 encryption. Enabled by setting 'TLS Authentication = yes'.
80 Note when this is on, TLS encryption is turned OFF!
82 kes This patch corrects a problem where the maximum concurrent storage
83 jobs counter gets out of sync during restore jobs causing jobs to
84 'wait on max Storage jobs'. This patch fixes bug #1009.
86 kes This patch fixes bcopy so that it produces correct Volumes.
88 kes This patch eliminates spurious output to the console during a VerifyVolume
89 job that contains encrypted data. It fixes bug #1024.
91 kes This patch prevents the 'status dir' command from trying to use a scratch
92 volume and possibly moving it from one pool to another. This patch fixes
95 kes Add new include to postgresql.c suggested by Marc Cousins so
96 that it compiles correctly with pgre version 8.3.
98 kes Fix --archivedir addition to configure. Replace it with
99 --with-archivedir in configure.in This fixes the regression
101 kes This patch fixes bug #1012 where the job is canceled because
102 of Max Run Time exceeded when the job has not yet started.
104 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
105 one 'part' to write. Instead of each part being stored on disk,
106 written to DVD, then deleted from disk, all parts are written to disk,
107 and only the last is written and deleted from disk.
108 kes This patch fixes the status command to include the formating string for
109 JS_AttrInsterting. It fixes bug #1021.
110 kes This patch should fix the Mac OS X build problem on the latest
111 Darwin, where sys/types.h was not included correctly (apparently
112 due to a change in the Mac headers). The solution was to explicitly
113 ensure that it is defined for the ./configure.
114 This patch also has a rebuild of configure that includes the Debian
115 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
116 kes This patch should ensure that queued messages to the console are
117 displayed as soon as possible. It should fix bug 1007, but has been
118 reported not to work.
120 kes This patch fixes the infinite loop when trying to increase the
121 maximum number of volumes in a Pool during the add command.
122 This patch fixes bug #1008.
124 Release Version 2.2.6
126 db Remove extra data on estimate command in joblist for bat.
128 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
129 really change anything, but is the beginning of doing it *right*.
130 To do it completely right the LastWritten date must be passed to
131 the SD, but it is not yet done.
132 kes Minor tweaks to some bat restore SQL.
133 kes This patch fixes bug #1003 where putting the message output from
134 a Verify job into the catalog results in a recursive loop. The problem
135 seems to show up only with postgresql (to be verified).
136 kes Correct %x to %p in postgresql debug statement.
138 kes Fix bug #942 where lots of emails where generated when the heartbeat
139 interval was low and Bacula wanted a different tape from the one in
142 ebl Add new SD despooling attributes and Dir inserting attributes
143 job status codes in the catalog (Status table).
145 ebl Use qmake-qt4 instead of qmake when available (debian system).
147 kes Add a security warning to src/cats/make_catalog_backup.in indicating
148 that passing the password via the command line (arg 3) is insecure.
149 This responds to bug #990 (it doesn't fix it).
151 kes Set default debug_level to zero. This corrects bugs #991 and #993.
152 kes Fix a crash in bat when it cannot connect to the Director for example
153 if the Director is not running.
154 kes Remove redundant INDEX (JobId) from File table in the trunk.
156 kes Make explicit exception to GPL in LICENSE to permit linking
157 the Win32 FD with Microsoft VSS code.
158 kes Apply the Solaris package patch from
159 Masopust, Christian <christian.masopust@siemens.com>
160 kes Apply the patch to optionally add a timestamp in the debug output
161 submitted by Mariusz Czulada <manieq@wp.eu>.
163 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
164 backend (sql_strerror). Fixes bug #989
166 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
167 It applied with no problems.
168 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
170 kes Redirect stderror to stdin on mt status command in mtx-changer.in
171 since the status is returned on stderr on Solaris.
172 kes Activate Close button on tray-monitor window. This fixes
174 kes Check for NULL item in parse_conf.c before calling it. In the
175 case of Device, there is no item and this caused a seg fault when
176 Device appears in the conf file.
177 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
178 avoids pulling in config.h multiple times in some new code.
180 kes Fix spurious warning message printed when creating a volume with
181 a LabelFormat. This fixes bug #976.
183 Release Version 2.2.5
185 kes Add JobId in place of Job name in all the Jmsg() output.
186 kes Correct the APP_DESC for the Win32 storage service (remove an e).
188 kes Make maxvol-test and new more strict maxvol2-test work.
189 kes Print JobId in all Jmsg() job output.
191 kes Add new SD despooling attributes and Dir inserting attributes
192 job status codes. This fixes bug 961.
193 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
195 kes Fix doc issue. This fixes bug #963.
196 kes Fix listing performance problems in bat. Pointed out by
198 kes Remove old debug code.
199 kes Fix bat code that tests for Win32. This should fix bug #968
200 kes Query 5 list wrong Vol after migration. This fixes bug #960
202 ebl Fix #969 where user can't change Replace option in restore menu.
204 kes Save jcr in thread specific data (tsd) for each thread.
205 kes Make Dmsg() print JobId as -%u.
206 kes Make Jmsg, Emsg, and others automatically pickup the jobid
207 for the thread if it exists.
208 kes Remove old reservation debug jid code.
209 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
210 ebl Add an option that permit to specify spool size in job
211 definition. (Applying patches/testing/spoolsize_per_job.patch).
212 You must upgrade SD and DIR at the same time.
213 dvl Add new configuration item --archivedir
214 dvl Adjust regression tests to use tmp not /tmp. This will allow
215 multiple concurrent runs of the regression tests.
217 kes Fix race condition that drops final block written to volume.
218 This happens in rare cases with multiple simultaneous jobs
219 when the Volume fills. This fixes bug #964. May be related
220 to bug #935 and possibly #903.
221 kes Eliminate more strerror() and replace with bstrerror().
222 kes Remove BSD getopt and replace with unrestricted IBM version.
223 kes Fix Win32 build for changed calling sequences.
224 kes More tweaks to the mount volume routines to get everything
225 right. Changed variable name from find to have_vol, which is
226 much easier to understand.
227 kes Enhance btimer debug code.
229 kes Fix FD->SD authorization failure, which was due to spurious
230 wakeups from a pthread_cond_timedwait(). Simply check the
231 predicate before continuing. This fixes bug #953.
232 kes Add const char where needed (more to do). Remove temp debug code.
234 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
235 kes Don't overwrite error message in check_tables_version.
237 kes Unlock batch insert tables with same calls used elsewhere.
238 kes Allow starting 59 jobs a second.
239 kes Make SD session key more random.
240 kes Add retry for SQLite opening db if it fails. Probably helps
242 kes Suppress extra error messages during batch insert failure.
244 kes Add jcr to timer packets so if killed message can be sent to job.
245 kes Add JobId to all Dmsg() output.
246 kes Put some FD auth code on dbglvl rather than fixed.
247 kes Return insert attributes error message in db msg buffer to avoid
248 false error messages. Helps fix bug #966.
249 kes Separate batch init error messages. Probably helps fix bug #966.
250 kes Make SD code that contructs attribute insert check string lengths
252 kes If Dir gets an error during inserting attributes, cancel SD.
253 This reduces unnecessary error messages.
255 kes Correct search boolean for getting Volume info
256 ebl Cleanup batch insert code. Probably fixes bug #965.
257 kes Back out one small change to the reservation system (reserving a volume).
258 kes Rework how a Volume is mounted. It is now much more intelligent and
259 will always attempt to use any mounted volume if possible and reduces
260 calls to the Director asking about volumes.
262 kes Turn off some code when batch insert not enabled.
263 kes Edit FD name in connect error messages.
264 kes Rework the reservation system to take into account that the Director
265 might give us a Volume that is different from the current one being
266 used, and to ensure that we don't exceed Maximum Volume Jobs.
267 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
268 fatal error with multiple jobs running'
269 kes Add more debug code in reservation system.
270 kes Implement maxvol-test to check bug #947.
272 kes Add code to handle tray monitor separated from Win32 FD.
273 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
275 kes Add missed return in fixing verify bug -- trunk only.
276 ebl Fix a command parser issue causing a director segfault.
277 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
279 kes Increase the max block size to 4MB fixes bug #957.
280 kes ERABT if user sets min block size > max block size. Fixes bug #956.
281 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
282 is not properly mounted (recognized) during a poll.
283 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
284 Job that has differences reports Verify OK.
285 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
287 ebl Add an option to operate on all pools with update vol parameters.
288 This complete the project 20. Patch from Nigel Stepp.
289 ebl Add history support to bconsole when using readline.
290 Using Ctrl-D to exit doesn't update .bconsole_history
291 kes Modify new volume algorithm to use max MediaId for generating next
292 volume number rather than the count of Volumes. This should essentially
293 eliminate the failure rate if some volumes were deleted. Bug #921.
294 kes Begin implemention of Optimize Job Scheduling.
295 kes Implement restore callback that Dirk and I agreed on for bat
296 restore. This fixes bug #928. Restore of backup of zero files fails.
297 kes Fix SQL Catalog logging which broke with new db_escape_string
300 Release Version 2.2.4
302 kes Fix bacula_cats.def for new db_escape_string().
303 kes Increase size of name string when FD making connection to SD.
304 May fix bug #953. FD->SD connection failure.
306 kes Add code to help Dan debug 2drive-incremental-2disk test.
307 kes Add code to try to fix bug #908.
308 kes Add waits to multiple exit detection code to try to force pid
309 file to always be deleted.
310 kes Restore good dev.tar.gz to rescue set appropriate binary property.
312 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
313 trying to switch drives by checking for blocking before unblocking.
315 kes Cancel storage daemon in all cases where FD reports error. This
316 should fix virtually all cases of bug #920.
317 kes Fix db_escape_string() for MySQL which did not compile.
319 kes Fix error message that was clobbered when Dir tells SD it does not
320 have write permission on Volume. This should fix a minor point
321 in bug #942, but not the main problem.
322 kes Add code to cancel job in SD if FD connection fails. This should
324 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
325 dvl Pass jcr and db into db_escape_string() to enable better escaping
327 kes Fix migration code to get correct Volume name with multiple volumes
328 by skipping |. Fixes bug #936.
329 kes Implement patch supplied by Landon to fix bug #944 where using
330 TLS with bconsole uses 99+% of the CPU.
331 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
333 kes Move patches into patches directory.
335 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
338 ebl Using 'm' in bconsole will show messages like before,
339 and not memory usage.
340 kes Fix bug #935, and probably also bug #903 where files were not
341 restored. MediaId was not properly set in JobMedia record after
344 kes Suppress chown and chmod error messages if the FD is not running
347 kes Apply Martin Simmons' patch that should turn off the new API usage
348 when batch insert is turned off allowing building on older
350 kes Add ./configure search in qwt-qt4 for qwt package
352 kes Bacula is now free of 3rd party GPL copyrighted code!
354 kes Add guid_to_name.c/h which replace idcache.
355 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
357 ebl Detect if new PosgreSQL batch insert API is present.
358 kes Correct incorrect mempool call causing Director crash. Occurs on
359 systems without va_copy().
360 sb Update spec files for 2.2.1 release
362 kes Fix memory pool call in ua_output.c. bug #934.
363 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
364 Add test program to fnmatch.c
366 kes Integrate patch to README.vc8 from
367 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
368 edit it to get it into Unix patch format.
369 kes Implement mkpath.c to replace old FSF makepath.c
371 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
373 Release Version 2.2.1
375 kes Update POTFILES.in
376 kes Cleanup a few underquoted AC_DEFUNs in configure
377 kes Apply patch from Martin Simmons that adds a test for va_copy to
380 kes Fix bug #921 by increasing the number of tries to create a new volume
382 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
383 can be called multiple times. Implement a version for machines
384 without va_copy() that gets a big buffer.
386 kes Integrate more portable zone offset code into bsmtp.c
387 Submitted by Attila Fülöp.
389 kes Fix bad SD->FD return status reported by
390 (James Harper) <james.harper@bendigoit.com.au>
391 ebl Fix a bug in read_close_session which return random status
392 thanks to James Harper
394 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
395 and directory names during restore of single file/directories.
396 kes Add sanity checks to .sql command when string is empty. Hopefully
397 that will resolve Dirks Director crash.
399 kes Apply patch submitted by Martin Simmons that corrects a seg fault
400 in the bsmtp chat subroutine when debug is >= 10.
402 kes Fix Director crash when running bat SQL queries.
403 kes Add David's notes on Item 8: Copy pools.
405 kes Rework projects file to be current and ready for a vote.
406 kes Enhance lex scanner error message.
408 kes Tweak LICENSE file to mention BSD code.
409 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
410 if specified on the ./configure.
411 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
412 This class is intended to allow us to open a second bsock to the
413 Director while in the restore subdialog.
415 kes Fix configure to create bat Makefile before creating dependencies.
416 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
417 kes Add a tooltip to the tray monitor.
418 dvl Set the Director's PID file before dropping privs. This fixes
421 kes Update AUTHORs file
422 kes Increase the default max concurrent jobs to 20 in FD and SD to
423 correspond with the default .conf files.
424 kes Rewrite the Win32 service routines. This eliminates the 3 copies
425 some different, of the same file created by RN when porting the
427 kes Rearrange some of the Win32 directories and the placement of the files
429 kes Set DEVELOPER flag in version.h
431 ========================================================================
432 Release Version 2.2.0
434 kes Apply a second doc patch from Marc.
435 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
436 improves the tips section that discusses how to setup multiple
439 kes Update bat README file.
440 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
441 corrects a typo in the Recycle status check in db_find_next_volume().
442 This will probably fix a number of annoying problems with multiple
444 kes Modify most of dird/msgchan.c to use bsock class calls rather than
445 bnet calls -- no functionality change.
447 kes Modify the Verify output to specify if files are missing on
448 the Volume(s) or disk. Fixes confusion in bug #916.
449 kes When more than one Volume is read in a migration job, the last
450 Volume bytes reported are from the last read volume rather than
451 the last written volume. Fixed. This fixes bug #910.
452 kes Fix display of Recycle flag after update volume=foo recycle=yes.
453 It previously printed New Recyle flag is: no. This fixes bug
456 kes Correct seg fault when switching tape drives during restore.
457 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
458 be used until after 2.2.0 release.
460 kes Remove fnmatch() in SD that permitted wild card specifications.
463 kes Fix %g in filename returned by SQL for browse tree reported by
465 kes Fix configure so that it puts config.out in the cwd rather than
467 kes Attempt to fix the locking problem reported by Eric in bug #906.
468 kes Make berrno class to leave errno unchanged after constructor call.
469 kes Make bnet_server use the heap rather than the stack to allocate
470 its socket fd pointers to avoid a crash at termination. Problem
471 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
473 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
474 and putting it in depkgs-qt along with Qt4.3.
476 kes Rework code in acquire.c that switches drives for reading when
477 the Media Type does not match. This should fix bug #906
479 ebl Fix a director segfault during job setup #907
480 kes Correct seg fault in postgresql when first operation returns no
481 rows. Fixes Dirks File browser problem seg fault with bat.
483 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
484 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
487 kes Implement PopUp YES/NO dialog for bat.
489 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
491 kes Correct RunScript to terminate job in FD on failure.
492 kes Change abort_on_error and AbortJobOnError to fail_on_error
493 and FailJobOnError in RunScripts.
494 kes Minor tweaks of code formating in RunScripts, principally to
495 avoid depassing 80 columns.
497 kes Eliminate one #ifdef Win32 in bsmtp
498 kes Implement grow tool to grow a file for testing very large databases.
499 kes Add big-vol-test to test Bacula seeking with > 5GB.
502 kes Modify find_next_volume() to return all values in Media record.
503 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
507 kes Update Release notes
509 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
510 Warning, in previous beta version, all media get from scratch keep their
513 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
514 This should fix bug #842. Made a note to look at removing the temp
515 files at the end of the install.
516 kes Add ability to mount and unmount a file device providing it is
517 marked as being removable and has the appropriate mount and unmount
518 commands defined in the Device resource. This fixes bug #830.
519 kes When applying a storage override, release all previous storage
520 definitions rather than just prepending the new storage.
521 This should prevent a good deal of confusion.
523 kes Implement ./configure search for qwt libraries.
525 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
526 Win32 FD. This should fix bug #893.
527 kes Remove an unnecessary beep in Win32 init code.
528 kes Update copyright dates in Win32 executable about boxes.
529 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
530 code with a BSD getopt.c and getopt.h.
531 kes Remove sched.h from the Win32 compat directory -- not used.
532 kes Remove the Exit menu item from the Win32 tray monitor. If you really
533 need to shut it down, do it through the services panel or the command
535 kes Remove some inappropriate Bacula FSFE copyrights.
536 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
537 kes Fix regress config non-portable test as pointed out by
538 Florian Heigl <florian.heigl@gmail.com>
539 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
540 as pointed out by Florian Heigl <florian.heigl@gmail.com>
542 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
543 Reported by Frank Sweetser.
547 kes Fix client-only build.
548 kes Integrate client-only fixes for bsys (initgroups) and conio from
549 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
550 kes Make arguments to get_scratch_volume() in same order as other
552 kes Rework the prune_volumes() subroutine so that after purging and
553 no volume found in desired pool, it will check for a scratch
554 volume. This prevents recycling the whole scratch pool.
555 kes Add code to status storage to print boffset_t (largefile support).
557 kes Move qwt (Graphics libarary for Qt4) to depkgs.
558 kes You now need a --with-qwt=<dir> to be able to build bat.
559 kes Update src/win32/cats/bacula_cats.def to include the new
560 db_get_query_dbids() call on Win32.
562 kes Correct a problem when selecting a scratch volume and moving
563 it to another pool that lost some columns.
564 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
565 kes Enhance Autochanger error messages to include Volume and device name.
566 kes Rework prune_volumes() code to take account of InChanger flag,
567 and to handle recycling volumes going to the Scratch pool and
568 current pool because the RecyclePool directive.
569 kes Implement a better and more efficient db_get_query_dbids() to
570 handle creating and passing back a list of DBIds.
574 kes Start work on new more efficient DBId subroutine. First use
575 will be for recycling volume to Scratch inchanger.
576 kes Increase number of JobIds in pruning from 1000 to 10000.
577 This to be replaced by above routine.
578 kes Begin implementation of building Qt4 on Win32.
579 kes Correct typo in fix I added for bad TLS shutdown.
580 kes Pull 2.0.3 patches into patches directory.
581 kes Update Release notes. Include qt-console in line count.
582 kes Update Projects file.
584 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
585 bug in migration code where a job that spanned two volumes
588 kes Implement new BST_DESPOOLING blocked state. Change from locking
589 during despooling in SD to blocking. This means that other threads
590 can work with the device structure, in particular the reservations
591 system while despooling.
593 kes Fix return in reservation message queue that missed clearing
594 the jcr lock (implemented 26Jun07 below).
595 kes Rename a number of dev methods to make locking function names
597 kes Document locking in lock.c. Move lock structures to new file
600 kes Move reservations message lock to lock jcr only this
602 kes Move main SD locking code into lock.c (new file).
603 kes Update Win32 build to include lock.c
607 kes Dirk committed the qwt library code for drawing graphs in bat.
608 kes Tweak install of qwt so that it is integrated with ./configure.
610 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
611 out by Eric (my typo).
612 ebl Fix configure.in to get batch mode enable
613 kes Return correct string from authenticate.cpp in bat when connecting
615 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
616 spurious line drops when using TLS.
617 kes Do not file reparse points when restoring a file that already
620 kes Implement Windows reparse points -- similar to directories, but
621 we do not descend into it. This is a first cut. They seem to
622 be backed up, but restore is not yet tested.
623 kes Remove restore_blocking in tls code when shutting a socket to leave
624 it in blocking mode. Hopefully this will fix the encryption bug
625 reported by Frank Sweetser.
626 kes When opening a file for backup, tell the OS that we are going to
627 read it sequentially -- optimization.
628 kes Change variable names in authenticate_director() to not conflict
629 with member names in bat. Caused great confusion with compiler,
632 kes Queue openssl error messages in case of comm problem.
633 kes Do shutdown() call if socket terminated.
634 kes Remove some duplicated code in tls.c
635 kes Move more of the bsock member variables into private and access
637 kes Add Frank Sweetser's tls-test to the regression suite.
639 kes Add Swedish sv.po file
641 kes Don't print clock skew message in FD if less than 3 seconds diff.
642 kes Add a bit of VSS info to status client.
643 kes Implement a first cut of Vista VSS, using Win2003 code.
647 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
648 loaded tape but uses first drive).
649 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
650 This was indeed a Win32 issue.
652 kes Simplify search of autochanger for in-use Volume.
653 kes Fix exit condition of check for in-use volume. kes Remove
654 inappropriate my_postgresql_free_result() in db_close()
656 kes Fix bad return in FD when encryption signature not found.
657 Probably caused a crash.
658 kes Inhibit missing encryption signature error messages for
659 file types where no signature computed.
660 kes Correct inverted check on autochanger in reservation system.
661 kes Tweak debug code in autochanger reservation.
663 kes Add some additional locking in the cats directory in subroutines
664 that modify packet variables called from batch insert.
665 kes Rework how dcrs are allocated. new_dcr() can now be called
666 with an existing pointer, and it will simply clean it up.
667 This allows the reservation system to test various different
668 devices, and will permit easy device changes.
669 kes A bunch of changes all over to handle new new_dcr() calling
671 kes Work more on the Volume management in the SD. Remember Volumes
672 for tape drives and for autochangers (even virtual disk changers).
673 kes When looking at the Volume list to reserve a drive, handle
674 autochanger names correctly by interating through the changer
675 devices. Also call the Director to see if a Volume is suitable
677 kes Fix some bugs in bscan. Make sure all media records are written.
678 Make sure that valid JobMedia records are written for disk files.
679 Previously they were completely wrong.
680 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
681 that the URLs don't change and so that the developers will all
682 work off the same copy. Rebuild from scrach.
683 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
687 kes Fix seg fault in FD from incorrect digest size.
688 kes Fix argument to non-OpenSSL crypto.c subroutine.
692 kes Remove a few malloc()s from the encryption code.
693 kes Use the class calls to bsock in filed/backup.c and restore.c in
694 place of the old bnet_xxx code.
695 kes Implement code that does an on the fly calculation of the
696 signing digest during restore of encrypted files. It makes
697 a best guess at the algorithm, and if it is not correct, will
698 then revert to the old code which reads the file after it is
700 kes Implement at least one missing crypto stream in stream_to_ascii()
701 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
702 #877 where a reload with bad syntax causes Dir to exit.
704 Cut: 2.1.14 beta (not released)
706 kes Do not free a volume on a tape drive until another volume is
707 mounted and read, or the autochanger unloads the volume.
708 This should help the SD re-use volumes that are already mounted,
709 and should fix bug #886.
710 kes Apply patch from user brettedgar that allows gnome2-console include
711 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
712 kes Apply patch from Lucien Weller that fixes day of week calculation
713 because of DST flag problem. Fixes bug #887.
715 kes Move find_next_appendable_volume() to after acquiring a valid device
716 in reserve.c. This fixes bug #864 -- confirmed by reporter.
718 kes Unable to reproduce bug 872. However added additional testing for
720 kes Bug #874 resolved by documenting SQLite limitations.
721 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
722 kes Bug #881 resolved by removing typo in mtx-changer script.
723 kes Made Frank Sweetser's wiki the official Bacula wiki with his
724 approval. Added a link to the wiki on the web page, and implemented
725 a backup from http://paramount.ind.wpi.edu
727 kes Fix update allfrompool to pass pool name.
729 kes Convert to pure GPL v2 license.
730 kes Fix sscanf problems reported by Peter Buschman that caused
731 a bus error on Solaris.
732 kes Rework (simplify) the select prompt in bat.
733 kes Move get_jobid_from_tid() into lib and create a
735 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
736 should definitely fix the problem of lost error messages in the
738 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
739 kes Eliminate tcpd.h from the project. Enclose the #include from the
740 library with extern C ...
741 kes Add print of signal name when a signal is trapped.
745 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
747 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
748 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
749 makes SQLit3 run 30 times faster, though a bit less safe.
750 kes Implement --with-batch-insert in configure and detection of thread
751 safe libraries. It is on by default, but turned off if no thread
752 safe library (e.g. SQLite 2) is available.
754 kes Fix Bacula PostgreSQL buffer overruns.
755 kes Do better checking for NULL results returned from PostgreSQL;
756 implement retry for failed queries; clear results buffer after
757 failed query. Hopefully this will correct the PostgreSQL failures.
759 kes Implement algorithm to handle only one appendable volume with
760 Prefer Mounted Volumes = no.
761 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
762 returned from a query.
763 kes Make volume lock recursive.
764 kes Implement an additional volume reservation algorithm that
765 starts by considering all reserved volumes then uses the
766 old brute force algorithm of searching the resources to
767 find a suitable device.
768 kes Add new reservations debug code and refine the old code.
769 kes Update the win32/dll/bacula.defs file.
771 kes Tweak reservations algorithm to permit a few more cases, i.e.
772 volume reserved, but on different drive, ...
773 kes Enhance SD status to include Pool and Media Type for drive in a
774 more readable format (a bit longer).
775 kes Fix PostgreSQL double free.
777 kes Minor refactoring of restore decryption code.
778 kes Add code to smartall.c to detect double free of a buffer.
780 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
781 so that bsmtp will create a correct email address (mailbox only).
782 kes Modify 'memory' command so that the buffers are listed as 'In use'
783 to avoid confusion with Orphaned buffers.
784 kes I reworked the OpenSSL include/lib flags to be handled in
785 the standard Bacula way, which should fix bug #863 concerning
786 non-standard OpenSSL libraries.
788 kes Implement Help Browser window for bat.
789 kes Fix reload bug that reset StorageId to zero.
791 kes Fix TLS #ifdefing when TLS turned off.
792 kes Ensure that when labelling a tape with Slot=0 that InChanger
794 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
796 kes Add StartTime to final uar_sel_jobid_temp query so that we can
797 add DISTINCT (required by PostgreSQL).
798 kes Implement BSOCK authenticate_director() method. Eventually will
799 authenicate all daemons.
800 kes Move several more functions into the BSOCK class.
802 kes Add code to tell the OS that we no longer need a cached
803 file that we were reading. In findlib/bfile.c. Also,
804 only cache files that we are reading. Thanks to
805 Tobias Oetiker <tobi@oetiker.ch> for the idea.
806 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
807 kes Implement script to automatically generate cats and dll .def
809 kes Update README.mingw32 to include new .def file generation.
810 kes Correct typo in UTF-8 error message as reported by:
811 jhernandez <julianhernandez@gmail.com>
812 kes Add additional sm_check() code on debug level 1.
813 kes Set default debug level to 1.
814 kes Trap SIGABRT in attempt to get traceback.
816 kes Reduce bat connect timeout from 30 to 15 seconds.
817 kes More restructuring and implementing BSOCK class in place of
819 kes Remove a few unnecessary malloc() tests in crypto code.
820 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
821 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
822 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
824 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
826 kes Fix Verify InitCatalog. The attributes were not pointing to the
827 correct saved location.
828 kes Implement message callback so that GUI is sure to get all
829 daemon messages. Currently displayed in a dialog in bat.
830 kes Ignore SIGUSR2 (Bacula timer) in bat.
831 kes Apply regress patch from bug #859 to allow regress to work
832 with Solaris compiler.
834 kes Begin adding TLS support to bat.
835 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
836 clean up lex.c and make it more readable.
838 kes Move more bnet functions into the BSOCK class.
839 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
840 kes Complete change of berrno strerror() method to bstrerror()
844 kes Cleanup incorrect email addresses in bsmtp.
845 kes Make bat display initial messages rather than discard them.
847 kes First cut of adding .mod to the run command.
848 kes Implement auto display of messages in bat.
849 kes Enhanced preferences to allow all Bacula output to be
852 kes Try to make bsmtp date routines more generic.
853 kes Fixed bug #856 autochanger documentation.
854 kes Rework bsmtp date editing for Win32. This fixes bug #854.
855 kes Add new cats entry point so Win32 builds.
857 kes Attempt to fix bsmtp date editing on OSes without %z editing.
859 kes Do better checking for the MySQL 64 bit libraries looking for both
860 .a and .so libraries.
861 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
862 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
863 kes Require the thread safe version of MySQL during configure. Thanks
864 to Andre Noll for pointing this out.
865 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
866 continuing in migration code.
867 kes Apply implementation of tray-monitor font derived from gnome-console
868 submitted by Andreas Piesk <a.piesk@gmx.net>
870 kes Eliminate important memory loss in SQLite
871 kes Fixed the batch insert MySQL thread specific data that was not
872 being freed. See cats/mysql.c:db_thread_cleanup().
873 kes Fix restore before command.
874 kes Convert old hdr.name to name() in a few places.
875 kes Implement update jobid command.
876 kes Return all time_t dates in db_get_job_record()
877 kes Stop watchdog in SD earlier.
878 kes Put Pool just after Storage in please mount message.
879 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
882 kes Update the po files.
883 kes Fix Verify InitCatalog by making it cache attributes.
885 kes Change name bacula-bat to bat for man 1 page to correspond to
887 kes Check for client and store NULL pointers in status command. This
889 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
890 kes Fix sign extended editing of %p.
891 kes Clean out a little old #ifdefing in cats/mysql.c
893 kes If time diff between DIR and FD is more than 600 seconds convert
894 INFO message to WARNING.
895 kes Implement heap size display in status for all daemons.
896 kes Attempt to fix MySQL db open memory loss (not successfull).
897 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
898 kes Eliminate memory loss in MySQL (possibly other SQLs) during
899 Query. This looks like a MySQL but but by doing extra releases,
900 the memory goes away. This should fix bug #847.
902 kes When backup fails, cancel SD before waiting for sd termination.
903 kes If SD is waiting for FD to connect during cancel, wake up the
905 kes Fix fsf code so that errno is correctly reported.
906 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
908 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
909 so that Bacula doesn't later stumble into a seg fault.
910 kes Use the term Restore Client in the restore Job report.
911 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
912 the original job's FileSetId.
913 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
914 spooling in migration jobs. Not yet tested.
915 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
916 reading conf file from a pipe. However, do it with open_bpipe()
917 rather than popen. Not yet tested.
919 kes Fix an ugly bug where the VolCatBytes were getting updated
921 kes Implement bconsole memory command that prints current memory
922 usage, plus smartalloc dump.
923 kes Clarify some error messages in backup, admin, and migrate.
924 kes Shrink label dialog to smaller size.
925 kes Invert Cancel OK buttons on restore to be OK Cancel.
926 kes More strerror() to bstrerror() conversions.
928 kes Start implementing bstrerror() in place of strerror().
929 kes Stripping path -- seems to work.
931 kes Prevent door and port files from being restored (mostly
933 kes Free an unreleased buffer in compat code.
934 kes Change console Job name from *Console* to -Console- to eliminate
935 Win32 filename problems. Put Win32 path separator when creating
936 Console file. This fixes bug #846.
937 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
939 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
941 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
942 to force Win32 error message.
944 kes First cut strip path. The data should be passed to the FD,
945 but nothing is done with it yet.
946 kes Enhance the digest and signature routines in the crypto
947 library to accept a JCR and to use it to print error messages
948 so that they will go in the Job report rather than the daemon's
950 kes Simplify some of the verify signature code.
951 kes Simplify a few of the alternative returns in the signature
954 ebl Use only POSIX regex instead of GNU regex in breg.c for
955 File relocation. It fix broken freebsd compilation.
956 kes Convert all other Dir files to use new ua class message
958 kes Tentative fix for missing digest signature in bug 807.
959 kes Correct handle problem in new win32_ftruncate routine.
960 kes Convert ua_purge.c and ua_update.c to use new ua class
961 message routines for bat.
963 kes Correct incorrect installation of LICENSE in Win32 installer.
964 kes Display LICENSE at the beginning of the Win32 install.
965 kes Attempt to correct the need for the png files to be installed
967 kes Reapply my bat.conf install script in qt-console. I think I
968 editted bat.pro instead of bat.pro.in and it was lost.
969 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
970 the /var/lock/subsys for subsysdir. Also corrects typos in the
973 kes First cut update job.
974 kes Correct configure to include qmake of src/qt-console directory.
976 kes Make restore job yes/mod/no print in one command so GUI works.
977 kes First cut implementing backup and restore client.
978 kes Correct editing in Verify output that caused a seg fault.
980 kes Insure that bat.conf is not overwritten during installation.
981 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
982 while I was implementing migration in March 2006 !
984 ebl Cleanup file relocation, using char *RegexWhere instead of
985 char *where + bool where_use_regexp
986 kes Update some manpages and add bat manpage.
987 kes Make a first cut at converting bacula.spec.in for bwx-console
989 kes Apply patch from John Goerzen to add hostname as fourth argument
990 to make_catalog_backup script.
991 kes Fix typos I introduced into bsmtp.c
992 kes Make pm_strxxx() routines handle input of NULL pointer. This
993 is to protect from NULL pointers returned from SQL databases.
994 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
995 kes Add more debug to FIFO code -- fix fifo regression test.
997 kes Implement posix_fadvise in FD, and for reading spool files in SD.
998 kes Add thread timer to bnet_connect() to break from OS if wait time
1001 kes Update Win32 build to include new files, new symbols, and
1003 kes Implement socket level heartbeat (tcp_keepidle)
1004 ebl Commit File relocation patch
1005 kes Make bat have 'make install' target.
1006 kes Warn during install if old gnome-console binary found.
1007 kes Warn during install if old wx-console binary found.
1008 kes Add -8 option to bsmtp command line to add content type utf-8.
1009 Fixes bug #809. (Character coding problem in bsmtp).
1010 kes If < is found in target (from, to, cc) then do not enclose the
1011 target in < > in bsmtp. Fixes bug #772 (malformed address).
1012 kes When printing certain items in dbcheck, stop after 300000.
1013 Fixes bug #822. (dbcheck loops).
1014 kes Incorrect status in Dir after waiting for mount with poll set.
1017 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1019 kes Print waiting to reserve a device every 5 mins.
1021 kes Don't call close_part in label.c if tape and relabel.
1022 kes Don't free volume if busy in close() -- should help with
1024 ebl Fix #824 RunScript bug (After script could be execute twice)
1025 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1026 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1027 Add a regression script to test RunScript
1029 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1032 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1033 deprecated. No additional bugs will be fixed, and they will be dropped
1034 in a future release (probably 2.4.0).
1035 kes Change name of wx-console to bwx-console to make it more Bacula
1037 kes Change the name of gnome-console to bgnome-console to make it
1040 kes Some time in March, a Feature Request with patch from Jorj Bauer
1041 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1043 The ability for the director to validate a Client (FD) CN against
1044 an arbitrary set of patterns rather than the hostname, with
1045 A new 'TLS Allowed CN' set of directives which are implemented
1046 in the Client resource. Then pattern matching is used in place
1047 of hostname matching against the Certificate's CN. As an example, we
1048 have certificates which (a) use a local CA, and (b) have a CN of the
1050 kes Add new/changed entry points to Win32 build
1051 kes Create unaccepted-projects for projects that are not accepted.
1052 kes Simplify locking in the reservations system.
1053 kes Add more debug code in reservations.
1054 kes Make sure error condition on reserving a volume is handled correctly.
1055 kes Correct handling of volume_in_use.
1056 kes Correct handling of initializing a device.
1057 kes Move handling of broadcasting releasing a device into release_device().
1058 kes Correct attaching dcr to dev so that it is only done if device
1059 is properly initiated.
1061 kes Locking debug level tweaks in SD.
1062 kes Tweak new Volume code.
1064 kes Add exec external-command [wait-seconds] to bconsole. This
1065 executes the external-command. Note! normally external-command
1066 should be enclosed in double quotes.
1067 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1068 it should normally be off in a production system.
1070 kes Implement die command for SD so that we can force it to dump.
1071 kes Implement SD lock debug code.
1072 kes Implement new algorithm for keeping Volume list in SD. It
1073 is now owned by the device.
1075 kes Implement new code for freeing in use volumes that should
1076 resolve if not all, some of the problems of multiple drive
1077 tape conflicts described in bug 801.
1079 kes Fix gui/bacula-web/images files in svn.
1080 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1082 ebl Fix a bug in batch mode (in string escape)
1083 kes Correct migration prune SQL typo that crept in in a
1084 recent 2.1.x change.
1086 kes Move bnet_despool() into class in bsock.c
1087 kes Modify job report to include director name and Build OS.
1088 kes Move drop root privilege and check_catalog() before fork.
1089 kes Add update database scripts (version 9 to 10) to updatedb directory.
1091 ebl Check size and age of each file after its backup to see if
1092 it has changed during backup, if 'checkfilechanges' is set.
1093 The FD will do an extra check (stat(2)) after
1094 each file backup. mtime, ctime and size are compared with
1095 'before backup' information. If time or size mismatch, an
1096 error message will be generated. You must upgrade FD to use it.
1098 kes Make database name and user configurable
1099 --with-db-name=xxx --with-db-user=xxx
1100 kes Add back database type to message.c for debugging.
1102 kes Implement dir_sql() which issues an SQL query.
1103 kes Modify bat medialist to use dir_sql() and do some minor C++
1104 formatting as well as eliminating a number of pointers, simplifing
1107 kes Fix some of the mtx-changer grep commands for tape label readers.
1108 kes Convert a number of bsendmsg into the appropriate send/warning/error
1109 message class calls.
1110 kes Suppress the using database message in the .sql command.
1111 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1113 kes Add context menu for floating a window.
1114 kes Some minor cleanup and name changes in qt-console
1115 kes Add doing mt setblk 0 in Win32 mtx-changer.
1116 kes Apply Martin's bug fix to move definition of ENODATA for
1118 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1119 sqlite2 and sqlite3.
1121 kes More pruning cleanup.
1122 kes Turn on wait_for_drive by default in mtx-changer.
1123 kes Turn on Batch insert code by default as it now passes regression.
1124 kes Add ./configure --enable-bat to enable building of Bat.
1125 No install yet though.
1127 kes Implement a new .sql command for bat.
1128 kes Implement code to turn off pruning in obtaining the next volume.
1129 Pruning is turned off for the status dir command, but turned on
1130 for SD requests and for the list nextvolume command.
1132 kes Correct Qmsg() that was not updated correctly when committing a
1133 previous change (probably the recent TLS patch).
1135 kes Write new subroutine is_volume_purged() that explicitly checks
1136 if the Volume is purged, and if so marks it as such. This should
1137 resolve problems reported about needing to mount twice to recycle
1139 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1140 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1141 amount of duplicated code.
1142 kes Do volume pruning only for the Media Type desired (reduces pruning time
1143 if multiple Media Types are in the same pool).
1144 kes Implement more detailed info in the Job report for the Bacula version
1146 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1148 ebl Add bbatch tool to bench database and insert mode.
1149 Fix sql quote stuff in batch mode
1150 Fix sql stuff for mysql
1152 kes Correct problems with am/pm scheduling. Fixes bug #808.
1153 kes Implement new prunning code that prunes up to 1000 jobs at
1154 the same time. The same technique can be applied to a number
1155 of other prune/purge subroutines.
1156 kes Add an insanity check when starting a new tape job to ensure
1157 that the tape position has not been changed. If so fail the
1159 kes Fix Win32 build for dlls to add the folllowing:
1160 src/lib/bsock.c -- new file with new entry points
1161 src/lib/dlist.c -- new entry points
1162 src/cats/sql_create.c -- new entry point
1163 src/cats/sql_cmds.c -- new DATA item exported
1165 ebl batch mode cleanup bscan-test is ok now.
1166 kes Implement SD code to check length of disk volume before appending.
1168 kes Correct return status on db_batch... routines.
1169 kes Add call to db_write_batch_file_records() to migration code.
1170 ebl Fix AfterJob timing
1171 kes Move the checking of the database in initializion of the Director
1172 to after we drop privileges. This avoids the need for both root
1173 and bacula access to the DB.
1174 kes Correct a misplaced variable definition in src/filed/backup.c
1175 kes Correct how the new batch insert db_create_attributes_record()
1176 uses the arguments. Caused a seg fault in bscan.
1177 kes Implement lock() and unlock() methods in DEVICE class.
1178 Implement block() and set_block(xx) methods in DEVICE class.
1179 kes Modify bnet_connect() so that it uses time() to check for the
1180 wait time expiring (on some OSes, some system calls may not
1181 return immediately).
1182 kes Modify Verify to obtain the previous JobId when it is actually
1183 running rather than at schedule time (as it was in 1.38.x).
1184 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1186 kes When checking pid in pid file, continue running if the pid is
1187 the same as ours. This occurs on IRIX after a system crash.
1190 kes Extend new GUI API.
1191 kes Make the ua structure a class, and implement send_msg(),
1192 error_msg(), warning_msg(), and info_msg().
1194 kes Apply fix from for building wx-console on the Mac from
1196 kes Implement new select mechanism for GUI programs.
1197 kes Reorganize initialization of stackedWidgets in bat.
1199 kes Add updated nagios plugin supplied by Christian Masopust.
1201 kes More bat implementation.
1202 kes File migrate bug with Pool Occupancy using mediaid instead
1203 of jobids. Fixes bug #795.
1204 kes Fix orphaned buffers in filed backup and verify due to
1205 crypto buffers not freed during errors. Fixes bug #789.
1206 kes Extend new GUI api code to tree commands.
1207 kes Ensure that tree and dot commands check console ACLs.
1208 kes Permit marking directory with trailing slash.
1209 kes Allow 20 console connections (instead of only 10).
1211 kes Add smartctl call to bacula-sd.conf as an example of getting
1214 kes Modify jobq.c to let simultaneous restore jobs run. This may
1215 cause them to fail if they cannot get a drive.
1216 kes Add Client Connect Wait to Storage daemon to permit users to
1217 modify the time the SD waits for a FD connection.
1219 kes Correct virtual changer check which was backwards. This caused
1220 volumes to be unloaded into slots already occupied.
1222 kes Apply Command ACL filter to JobId list in restore command.
1223 kes Correct typeo in var.c patch.
1225 kes Don't let Bacula prune File or Job records for the current Job.
1226 kes Fix variable substitution pad + inc bug reported (with patch)
1229 kes Correct SQLite log table index as reported by Luca Berra.
1231 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1233 kes Begin implementing new comm signals for API.
1234 kes Fix a few places in lib/message.c where the open fd may
1236 kes Continue implementing lib/bsock.c (real class). Make jcr,
1237 who, host, and port private. There are new methods to access
1238 them for non-class use. This required touching a number of files.
1240 kes Add LANG=C to autoconf/randpass so it works with languages other
1241 than English. Fixes bug #788.
1243 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1245 You will not be able to generate Include/Exclude list any more.
1246 It will be fixed soon.
1247 If you want to use this, you can apply
1248 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1250 kes Restore of sockets created false error messages because Bacula
1251 no longer restores sockets, but the code was still trying to
1252 set the attributes on a non-existent file. Reported by a user.
1253 ebl finish RecyclePool feature
1254 Media will takes Pool.RecyclePool
1255 when moving from Scratch to a Pool or when user will do
1256 update volume=xxx frompool
1257 To use it, add RecyclePool = aPool to your Pool resource
1260 RecyclePool = Scratch
1264 kes Expand new BSOCK class adding signal() and new BNET signals.
1265 kes Begin enhancing the dot commands adding a new API function
1266 that returns more information and will make it easier
1267 to interface to the Director from a program.
1269 kes Make DEVICE fd private. Its new name is m_fd, and can be
1270 obtained with dev->fd() outside the class. This is the
1271 first of many DEVICE members to be made private.
1272 kes Implement Michael Renner's idea on having a virtual disk
1273 changer. I made some minor modifications (e.g. I did not
1274 implement the Virtual Changer directive, but simply set
1275 the Changer Command to an empty string.
1277 kes Implement a BSOCK send() method that writes the whole record
1278 in a single write() request rather than in two.
1279 ebl add update volume=xxx recyclepool=yyyy
1280 volume takes recyclepool from pool when using update volume=xxx from pool
1282 kes Fix encryption deblocking bug, which caused some restored files
1283 to be truncated. This fixes bug #763.
1284 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1285 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1287 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1288 ebl Use btime_t instead of uint64_t in media patch.
1290 kes Optimize the use of the database a bit in the Status dir command.
1291 Only open it when needed, ensure that if any previous database
1292 was opened, it is closed.
1294 kes Correct VolCatBytes bug from media patch.
1295 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1296 in the case of orphaned records.
1297 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1298 and File records in 300K chunks to be more efficient. This
1299 idea came from Juan Luis Frances (if I remember right).
1300 kes Apply Eric's scratch patch that moves a purged Volume to
1301 the RecyclePool. Question: how is RecyclePool set? what
1302 happens to the ScratchPool?
1303 kes Apply Eric's media patch that collects read/write media
1304 times as well as byte counts. This patch requires a
1305 simultaneous upgrade of the DIR and SD. Note, there
1306 should be some way to turn off timing. I'm not sure
1307 times are in Bacula units.
1308 kes Apply Eric's batch-insert patch.
1310 kes Update projects list.
1312 kes Implement Include/Exclude file lists in FD as dlists using
1313 the new dlistString class. This permits efficiently having
1314 large include/exclude lists and completes project Item 25.
1315 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1316 console is authorized to cancel the job. This fixes bug
1318 kes Modify SD so that the VolCatJobs medium record is updated
1319 at the beginning of a Job rather than the end. This
1320 fixes bug #775 where exceeding MaxVolJobs caused jobs
1322 kes Added a mutex around getting and setting Volume information
1323 so that multiple simultaneous jobs will single thread.
1325 Switch to using Subversion
1326 kes Remove src/pygtk-console/ from configure
1328 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1329 plus the entrypoints.
1330 kes Apply patch supplied that corrects debug print
1331 in canceling jobs for max run time. Supplied as
1332 part of bug #621, which was previously fixed.
1334 kes Test on job_canceled() and sd_msg_thread_done inside
1335 loop starting the message thread to avoid a race condition.
1337 kes Remove rl_catch_signal from console.c as it conflicted
1338 with the header definition. Fixes bug #765.
1339 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1341 kes Clarify some stored/acquire messages to indicate if the
1342 problem is with read or append.
1344 kes Fix memory leak with storage ids in cats/sql_get.c
1345 kes Terminate watchdog earlier to avoid reference to released
1346 memory -- reported by Jason Austin.
1347 kes Move closing the database from jobq.c to the director daemon
1348 termination routine. This fixes memory leaks for shadow jobs
1349 (i.e. migration jobs).
1350 kes Free up the unique jobid chain items in migrate.c. This fixes
1351 a memory leak problem.
1352 kes Convert some ugly looking for statements to use foreach_alist
1353 in findlib/find.c. This will facilitate converting the structures
1354 to use dlist (for large include/exclude lists).
1355 kes Fix a bug in the btree.c and btree.h routines, then rename them
1356 rblist and add them to be built in src/lib. Include some new
1357 methods written by Rudolf Cejka that make the code more readable
1358 (hides some of the ugly casting).
1359 kes Add set_next() and set_prev() methods which make the code much more
1360 readable. Also add a new dlistString class that facilitates storing
1361 strings in dlists. To be used in the large include/exclude lists.
1362 kes Make some trivial modifications to lib/tree.h that use rblist
1363 rather than dlist for storing the tree links. This was suggested
1364 by Rudolf Cejka. The result of this is that the restore tree now
1365 uses red-black binary trees rather than simple linked lists. This
1366 should give rather dramatic speed improvements for directories
1367 contining large numbers of directories/files (more than 10000).
1369 kes Fix maxruntime bug #621.
1371 ebl Implement the include JobID in spool file name project.
1372 kes Reorder projects file in order determined by Jan 2007 vote.
1373 kes Implement item #12 on project list -- quick release of FD by
1375 kes Fix open of SQLite3 db where user does not have write permission
1376 so that DIR does not crash. Fixes bug #761.
1378 kes Add back missing @ in Win32 Makefile.
1379 kes Change 'Device not configured to autolabel' from INFO
1381 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1382 which should restart an indefinite # of times.
1383 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1384 other DIR specifications.
1386 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1387 Fix path quoting in SQLite scripts.
1388 Fix problems with SHGetFolderPath.
1390 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1392 kes Fix Job restart on error bug that promotes an Inc to a Full
1393 backup. This should fix bug #755.
1394 kes Add qt-console and first cut of code.
1398 kes Fix Bacula->Documentation link on Win32 to point to index.html
1399 instead of bacula.html. Fixed bug #750.
1400 kes Return JobId in db_get_job_record() when JobId==0. This should
1402 kes Do not release source pointers when restarting a failed job.
1404 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1405 This *should* fix bug #747.
1406 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1409 kes Modify USTORE constructor to set an empty store_source string,
1410 and don't copy the store_source string in a cancel. Hopefully
1411 this will fix Arno's seg fault, bug #744.
1412 kes Add back code to disable conio in configure. Fixes bug #743.
1413 kes Correct the Options scanner in the FD to correctly handle
1414 SHA1 option, which was eating the next option. Reported by
1416 kes Add code to indicate when the SD is spooling, spool wait, and
1417 despooling as requested by Alan Brown.
1419 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob