1 Technical notes on version 2.3
5 kes Edit FD name in connect error messages.
6 kes Rework the reservation system to take into account that the Director
7 might give us a Volume that is different from the current one being
8 used, and to ensure that we don't exceed Maximum Volume Jobs.
9 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
10 fatal error with multiple jobs running'
11 kes Add more debug code in reservation system.
12 kes Implement maxvol-test to check bug #947.
14 kes Add code to handle tray monitor separated from Win32 FD.
15 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
17 kes Add missed return in fixing verify bug -- trunk only.
18 ebl Fix a command parser issue causing a director segfault.
19 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
21 kes Increase the max block size to 4MB fixes bug #957.
22 kes ERABT if user sets min block size > max block size. Fixes bug #956.
23 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
24 is not properly mounted (recognized) during a poll.
25 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
26 Job that has differences reports Verify OK.
27 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
29 ebl Add an option to operate on all pools with update vol parameters.
30 This complete the project 20. Patch from Nigel Stepp.
31 ebl Add history support to bconsole when using readline.
32 Using Ctrl-D to exit doesn't update .bconsole_history
33 kes Modify new volume algorithm to use max MediaId for generating next
34 volume number rather than the count of Volumes. This should essentially
35 eliminate the failure rate if some volumes were deleted. Bug #921.
36 kes Begin implemention of Optimize Job Scheduling.
37 kes Implement restore callback that Dirk and I agreed on for bat
38 restore. This fixes bug #928. Restore of backup of zero files fails.
39 kes Fix SQL Catalog logging which broke with new db_escape_string
42 kes Fix bacula_cats.def for new db_escape_string().
43 kes Increase size of name string when FD making connection to SD.
44 May fix bug #953. FD->SD connection failure.
46 kes Add code to help Dan debug 2drive-incremental-2disk test.
47 kes Add code to try to fix bug #908.
48 kes Add waits to multiple exit detection code to try to force pid
49 file to always be deleted.
50 kes Restore good dev.tar.gz to rescue set appropriate binary property.
52 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
53 trying to switch drives by checking for blocking before unblocking.
55 kes Cancel storage daemon in all cases where FD reports error. This
56 should fix virtually all cases of bug #920.
57 kes Fix db_escape_string() for MySQL which did not compile.
59 kes Fix error message that was clobbered when Dir tells SD it does not
60 have write permission on Volume. This should fix a minor point
61 in bug #942, but not the main problem.
62 kes Add code to cancel job in SD if FD connection fails. This should
64 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
65 dvl Pass jcr and db into db_escape_string() to enable better escaping
67 kes Fix migration code to get correct Volume name with multiple volumes
68 by skipping |. Fixes bug #936.
69 kes Implement patch supplied by Landon to fix bug #944 where using
70 TLS with bconsole uses 99+% of the CPU.
71 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
73 kes Move patches into patches directory.
75 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
78 ebl Using "m" in bconsole will show messages like before,
80 kes Fix bug #935, and probably also bug #903 where files were not
81 restored. MediaId was not properly set in JobMedia record after
84 kes Suppress chown and chmod error messages if the FD is not running
87 kes Apply Martin Simmons' patch that should turn off the new API usage
88 when batch insert is turned off allowing building on older
90 kes Add ./configure search in qwt-qt4 for qwt package
92 kes Bacula is now free of 3rd party GPL copyrighted code!
94 kes Add guid_to_name.c/h which replace idcache.
95 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
97 ebl Detect if new PosgreSQL batch insert API is present.
98 kes Correct incorrect mempool call causing Director crash. Occurs on
99 systems without va_copy().
100 sb Update spec files for 2.2.1 release
102 kes Fix memory pool call in ua_output.c. bug #934.
103 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
104 Add test program to fnmatch.c
106 kes Integrate patch to README.vc8 from
107 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
108 edit it to get it into Unix patch format.
109 kes Implement mkpath.c to replace old FSF makepath.c
111 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
113 Release Version 2.2.1
115 kes Update POTFILES.in
116 kes Cleanup a few underquoted AC_DEFUNs in configure
117 kes Apply patch from Martin Simmons that adds a test for va_copy to
120 kes Fix bug #921 by increasing the number of tries to create a new volume
122 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
123 can be called multiple times. Implement a version for machines
124 without va_copy() that gets a big buffer.
126 kes Integrate more portable zone offset code into bsmtp.c
127 Submitted by Attila Fülöp.
129 kes Fix bad SD->FD return status reported by
130 (James Harper) <james.harper@bendigoit.com.au>
131 ebl Fix a bug in read_close_session which return random status
132 thanks to James Harper
134 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
135 and directory names during restore of single file/directories.
136 kes Add sanity checks to .sql command when string is empty. Hopefully
137 that will resolve Dirks Director crash.
139 kes Apply patch submitted by Martin Simmons that corrects a seg fault
140 in the bsmtp chat subroutine when debug is >= 10.
142 kes Fix Director crash when running bat SQL queries.
143 kes Add David's notes on Item 8: Copy pools.
145 kes Rework projects file to be current and ready for a vote.
146 kes Enhance lex scanner error message.
148 kes Tweak LICENSE file to mention BSD code.
149 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
150 if specified on the ./configure.
151 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
152 This class is intended to allow us to open a second bsock to the
153 Director while in the restore subdialog.
155 kes Fix configure to create bat Makefile before creating dependencies.
156 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
157 kes Add a tooltip to the tray monitor.
158 dvl Set the Director's PID file before dropping privs. This fixes
161 kes Update AUTHORs file
162 kes Increase the default max concurrent jobs to 20 in FD and SD to
163 correspond with the default .conf files.
164 kes Rewrite the Win32 service routines. This eliminates the 3 copies
165 some different, of the same file created by RN when porting the
167 kes Rearrange some of the Win32 directories and the placement of the files
169 kes Set DEVELOPER flag in version.h
171 ========================================================================
172 Release Version 2.2.0
174 kes Apply a second doc patch from Marc.
175 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
176 improves the tips section that discusses how to setup multiple
179 kes Update bat README file.
180 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
181 corrects a typo in the Recycle status check in db_find_next_volume().
182 This will probably fix a number of annoying problems with multiple
184 kes Modify most of dird/msgchan.c to use bsock class calls rather than
185 bnet calls -- no functionality change.
187 kes Modify the Verify output to specify if files are missing on
188 the Volume(s) or disk. Fixes confusion in bug #916.
189 kes When more than one Volume is read in a migration job, the last
190 Volume bytes reported are from the last read volume rather than
191 the last written volume. Fixed. This fixes bug #910.
192 kes Fix display of Recycle flag after update volume=foo recycle=yes.
193 It previously printed New Recyle flag is: no. This fixes bug
196 kes Correct seg fault when switching tape drives during restore.
197 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
198 be used until after 2.2.0 release.
200 kes Remove fnmatch() in SD that permitted wild card specifications.
203 kes Fix %g in filename returned by SQL for browse tree reported by
205 kes Fix configure so that it puts config.out in the cwd rather than
207 kes Attempt to fix the locking problem reported by Eric in bug #906.
208 kes Make berrno class to leave errno unchanged after constructor call.
209 kes Make bnet_server use the heap rather than the stack to allocate
210 its socket fd pointers to avoid a crash at termination. Problem
211 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
213 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
214 and putting it in depkgs-qt along with Qt4.3.
216 kes Rework code in acquire.c that switches drives for reading when
217 the Media Type does not match. This should fix bug #906
219 ebl Fix a director segfault during job setup #907
220 kes Correct seg fault in postgresql when first operation returns no
221 rows. Fixes Dirks File browser problem seg fault with bat.
223 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
224 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
227 kes Implement PopUp YES/NO dialog for bat.
229 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
231 kes Correct RunScript to terminate job in FD on failure.
232 kes Change abort_on_error and AbortJobOnError to fail_on_error
233 and FailJobOnError in RunScripts.
234 kes Minor tweaks of code formating in RunScripts, principally to
235 avoid depassing 80 columns.
237 kes Eliminate one #ifdef Win32 in bsmtp
238 kes Implement grow tool to grow a file for testing very large databases.
239 kes Add big-vol-test to test Bacula seeking with > 5GB.
242 kes Modify find_next_volume() to return all values in Media record.
243 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
247 kes Update Release notes
249 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
250 Warning, in previous beta version, all media get from scratch keep their
253 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
254 This should fix bug #842. Made a note to look at removing the temp
255 files at the end of the install.
256 kes Add ability to mount and unmount a file device providing it is
257 marked as being removable and has the appropriate mount and unmount
258 commands defined in the Device resource. This fixes bug #830.
259 kes When applying a storage override, release all previous storage
260 definitions rather than just prepending the new storage.
261 This should prevent a good deal of confusion.
263 kes Implement ./configure search for qwt libraries.
265 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
266 Win32 FD. This should fix bug #893.
267 kes Remove an unnecessary beep in Win32 init code.
268 kes Update copyright dates in Win32 executable about boxes.
269 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
270 code with a BSD getopt.c and getopt.h.
271 kes Remove sched.h from the Win32 compat directory -- not used.
272 kes Remove the Exit menu item from the Win32 tray monitor. If you really
273 need to shut it down, do it through the services panel or the command
275 kes Remove some inappropriate Bacula FSFE copyrights.
276 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
277 kes Fix regress config non-portable test as pointed out by
278 Florian Heigl <florian.heigl@gmail.com>
279 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
280 as pointed out by Florian Heigl <florian.heigl@gmail.com>
282 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
283 Reported by Frank Sweetser.
287 kes Fix client-only build.
288 kes Integrate client-only fixes for bsys (initgroups) and conio from
289 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
290 kes Make arguments to get_scratch_volume() in same order as other
292 kes Rework the prune_volumes() subroutine so that after purging and
293 no volume found in desired pool, it will check for a scratch
294 volume. This prevents recycling the whole scratch pool.
295 kes Add code to status storage to print boffset_t (largefile support).
297 kes Move qwt (Graphics libarary for Qt4) to depkgs.
298 kes You now need a --with-qwt=<dir> to be able to build bat.
299 kes Update src/win32/cats/bacula_cats.def to include the new
300 db_get_query_dbids() call on Win32.
302 kes Correct a problem when selecting a scratch volume and moving
303 it to another pool that lost some columns.
304 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
305 kes Enhance Autochanger error messages to include Volume and device name.
306 kes Rework prune_volumes() code to take account of InChanger flag,
307 and to handle recycling volumes going to the Scratch pool and
308 current pool because the RecyclePool directive.
309 kes Implement a better and more efficient db_get_query_dbids() to
310 handle creating and passing back a list of DBIds.
314 kes Start work on new more efficient DBId subroutine. First use
315 will be for recycling volume to Scratch inchanger.
316 kes Increase number of JobIds in pruning from 1000 to 10000.
317 This to be replaced by above routine.
318 kes Begin implementation of building Qt4 on Win32.
319 kes Correct typo in fix I added for bad TLS shutdown.
320 kes Pull 2.0.3 patches into patches directory.
321 kes Update Release notes. Include qt-console in line count.
322 kes Update Projects file.
324 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
325 bug in migration code where a job that spanned two volumes
328 kes Implement new BST_DESPOOLING blocked state. Change from locking
329 during despooling in SD to blocking. This means that other threads
330 can work with the device structure, in particular the reservations
331 system while despooling.
333 kes Fix return in reservation message queue that missed clearing
334 the jcr lock (implemented 26Jun07 below).
335 kes Rename a number of dev methods to make locking function names
337 kes Document locking in lock.c. Move lock structures to new file
340 kes Move reservations message lock to lock jcr only this
342 kes Move main SD locking code into lock.c (new file).
343 kes Update Win32 build to include lock.c
347 kes Dirk committed the qwt library code for drawing graphs in bat.
348 kes Tweak install of qwt so that it is integrated with ./configure.
350 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
351 out by Eric (my typo).
352 ebl Fix configure.in to get batch mode enable
353 kes Return correct string from authenticate.cpp in bat when connecting
355 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
356 spurious line drops when using TLS.
357 kes Do not file reparse points when restoring a file that already
360 kes Implement Windows reparse points -- similar to directories, but
361 we do not descend into it. This is a first cut. They seem to
362 be backed up, but restore is not yet tested.
363 kes Remove restore_blocking in tls code when shutting a socket to leave
364 it in blocking mode. Hopefully this will fix the encryption bug
365 reported by Frank Sweetser.
366 kes When opening a file for backup, tell the OS that we are going to
367 read it sequentially -- optimization.
368 kes Change variable names in authenticate_director() to not conflict
369 with member names in bat. Caused great confusion with compiler,
372 kes Queue openssl error messages in case of comm problem.
373 kes Do shutdown() call if socket terminated.
374 kes Remove some duplicated code in tls.c
375 kes Move more of the bsock member variables into private and access
377 kes Add Frank Sweetser's tls-test to the regression suite.
379 kes Add Swedish sv.po file
381 kes Don't print clock skew message in FD if less than 3 seconds diff.
382 kes Add a bit of VSS info to status client.
383 kes Implement a first cut of Vista VSS, using Win2003 code.
387 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
388 loaded tape but uses first drive).
389 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
390 This was indeed a Win32 issue.
392 kes Simplify search of autochanger for in-use Volume.
393 kes Fix exit condition of check for in-use volume. kes Remove
394 inappropriate my_postgresql_free_result() in db_close()
396 kes Fix bad return in FD when encryption signature not found.
397 Probably caused a crash.
398 kes Inhibit missing encryption signature error messages for
399 file types where no signature computed.
400 kes Correct inverted check on autochanger in reservation system.
401 kes Tweak debug code in autochanger reservation.
403 kes Add some additional locking in the cats directory in subroutines
404 that modify packet variables called from batch insert.
405 kes Rework how dcrs are allocated. new_dcr() can now be called
406 with an existing pointer, and it will simply clean it up.
407 This allows the reservation system to test various different
408 devices, and will permit easy device changes.
409 kes A bunch of changes all over to handle new new_dcr() calling
411 kes Work more on the Volume management in the SD. Remember Volumes
412 for tape drives and for autochangers (even virtual disk changers).
413 kes When looking at the Volume list to reserve a drive, handle
414 autochanger names correctly by interating through the changer
415 devices. Also call the Director to see if a Volume is suitable
417 kes Fix some bugs in bscan. Make sure all media records are written.
418 Make sure that valid JobMedia records are written for disk files.
419 Previously they were completely wrong.
420 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
421 that the URLs don't change and so that the developers will all
422 work off the same copy. Rebuild from scrach.
423 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
427 kes Fix seg fault in FD from incorrect digest size.
428 kes Fix argument to non-OpenSSL crypto.c subroutine.
432 kes Remove a few malloc()s from the encryption code.
433 kes Use the class calls to bsock in filed/backup.c and restore.c in
434 place of the old bnet_xxx code.
435 kes Implement code that does an on the fly calculation of the
436 signing digest during restore of encrypted files. It makes
437 a best guess at the algorithm, and if it is not correct, will
438 then revert to the old code which reads the file after it is
440 kes Implement at least one missing crypto stream in stream_to_ascii()
441 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
442 #877 where a reload with bad syntax causes Dir to exit.
444 Cut: 2.1.14 beta (not released)
446 kes Do not free a volume on a tape drive until another volume is
447 mounted and read, or the autochanger unloads the volume.
448 This should help the SD re-use volumes that are already mounted,
449 and should fix bug #886.
450 kes Apply patch from user brettedgar that allows gnome2-console include
451 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
452 kes Apply patch from Lucien Weller that fixes day of week calculation
453 because of DST flag problem. Fixes bug #887.
455 kes Move find_next_appendable_volume() to after acquiring a valid device
456 in reserve.c. This fixes bug #864 -- confirmed by reporter.
458 kes Unable to reproduce bug 872. However added additional testing for
460 kes Bug #874 resolved by documenting SQLite limitations.
461 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
462 kes Bug #881 resolved by removing typo in mtx-changer script.
463 kes Made Frank Sweetser's wiki the official Bacula wiki with his
464 approval. Added a link to the wiki on the web page, and implemented
465 a backup from http://paramount.ind.wpi.edu
467 kes Fix update allfrompool to pass pool name.
469 kes Convert to pure GPL v2 license.
470 kes Fix sscanf problems reported by Peter Buschman that caused
471 a bus error on Solaris.
472 kes Rework (simplify) the select prompt in bat.
473 kes Move get_jobid_from_tid() into lib and create a
475 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
476 should definitely fix the problem of lost error messages in the
478 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
479 kes Eliminate tcpd.h from the project. Enclose the #include from the
480 library with extern C ...
481 kes Add print of signal name when a signal is trapped.
485 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
487 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
488 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
489 makes SQLit3 run 30 times faster, though a bit less safe.
490 kes Implement --with-batch-insert in configure and detection of thread
491 safe libraries. It is on by default, but turned off if no thread
492 safe library (e.g. SQLite 2) is available.
494 kes Fix Bacula PostgreSQL buffer overruns.
495 kes Do better checking for NULL results returned from PostgreSQL;
496 implement retry for failed queries; clear results buffer after
497 failed query. Hopefully this will correct the PostgreSQL failures.
499 kes Implement algorithm to handle only one appendable volume with
500 Prefer Mounted Volumes = no.
501 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
502 returned from a query.
503 kes Make volume lock recursive.
504 kes Implement an additional volume reservation algorithm that
505 starts by considering all reserved volumes then uses the
506 old brute force algorithm of searching the resources to
507 find a suitable device.
508 kes Add new reservations debug code and refine the old code.
509 kes Update the win32/dll/bacula.defs file.
511 kes Tweak reservations algorithm to permit a few more cases, i.e.
512 volume reserved, but on different drive, ...
513 kes Enhance SD status to include Pool and Media Type for drive in a
514 more readable format (a bit longer).
515 kes Fix PostgreSQL double free.
517 kes Minor refactoring of restore decryption code.
518 kes Add code to smartall.c to detect double free of a buffer.
520 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
521 so that bsmtp will create a correct email address (mailbox only).
522 kes Modify 'memory' command so that the buffers are listed as 'In use'
523 to avoid confusion with Orphaned buffers.
524 kes I reworked the OpenSSL include/lib flags to be handled in
525 the standard Bacula way, which should fix bug #863 concerning
526 non-standard OpenSSL libraries.
528 kes Implement Help Browser window for bat.
529 kes Fix reload bug that reset StorageId to zero.
531 kes Fix TLS #ifdefing when TLS turned off.
532 kes Ensure that when labelling a tape with Slot=0 that InChanger
534 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
536 kes Add StartTime to final uar_sel_jobid_temp query so that we can
537 add DISTINCT (required by PostgreSQL).
538 kes Implement BSOCK authenticate_director() method. Eventually will
539 authenicate all daemons.
540 kes Move several more functions into the BSOCK class.
542 kes Add code to tell the OS that we no longer need a cached
543 file that we were reading. In findlib/bfile.c. Also,
544 only cache files that we are reading. Thanks to
545 Tobias Oetiker <tobi@oetiker.ch> for the idea.
546 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
547 kes Implement script to automatically generate cats and dll .def
549 kes Update README.mingw32 to include new .def file generation.
550 kes Correct typo in UTF-8 error message as reported by:
551 jhernandez <julianhernandez@gmail.com>
552 kes Add additional sm_check() code on debug level 1.
553 kes Set default debug level to 1.
554 kes Trap SIGABRT in attempt to get traceback.
556 kes Reduce bat connect timeout from 30 to 15 seconds.
557 kes More restructuring and implementing BSOCK class in place of
559 kes Remove a few unnecessary malloc() tests in crypto code.
560 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
561 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
562 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
564 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
566 kes Fix Verify InitCatalog. The attributes were not pointing to the
567 correct saved location.
568 kes Implement message callback so that GUI is sure to get all
569 daemon messages. Currently displayed in a dialog in bat.
570 kes Ignore SIGUSR2 (Bacula timer) in bat.
571 kes Apply regress patch from bug #859 to allow regress to work
572 with Solaris compiler.
574 kes Begin adding TLS support to bat.
575 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
576 clean up lex.c and make it more readable.
578 kes Move more bnet functions into the BSOCK class.
579 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
580 kes Complete change of berrno strerror() method to bstrerror()
584 kes Cleanup incorrect email addresses in bsmtp.
585 kes Make bat display initial messages rather than discard them.
587 kes First cut of adding .mod to the run command.
588 kes Implement auto display of messages in bat.
589 kes Enhanced preferences to allow all Bacula output to be
592 kes Try to make bsmtp date routines more generic.
593 kes Fixed bug #856 autochanger documentation.
594 kes Rework bsmtp date editing for Win32. This fixes bug #854.
595 kes Add new cats entry point so Win32 builds.
597 kes Attempt to fix bsmtp date editing on OSes without %z editing.
599 kes Do better checking for the MySQL 64 bit libraries looking for both
600 .a and .so libraries.
601 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
602 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
603 kes Require the thread safe version of MySQL during configure. Thanks
604 to Andre Noll for pointing this out.
605 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
606 continuing in migration code.
607 kes Apply implementation of tray-monitor font derived from gnome-console
608 submitted by Andreas Piesk <a.piesk@gmx.net>
610 kes Eliminate important memory loss in SQLite
611 kes Fixed the batch insert MySQL thread specific data that was not
612 being freed. See cats/mysql.c:db_thread_cleanup().
613 kes Fix restore before command.
614 kes Convert old hdr.name to name() in a few places.
615 kes Implement update jobid command.
616 kes Return all time_t dates in db_get_job_record()
617 kes Stop watchdog in SD earlier.
618 kes Put Pool just after Storage in please mount message.
619 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
622 kes Update the po files.
623 kes Fix Verify InitCatalog by making it cache attributes.
625 kes Change name bacula-bat to bat for man 1 page to correspond to
627 kes Check for client and store NULL pointers in status command. This
629 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
630 kes Fix sign extended editing of %p.
631 kes Clean out a little old #ifdefing in cats/mysql.c
633 kes If time diff between DIR and FD is more than 600 seconds convert
634 INFO message to WARNING.
635 kes Implement heap size display in status for all daemons.
636 kes Attempt to fix MySQL db open memory loss (not successfull).
637 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
638 kes Eliminate memory loss in MySQL (possibly other SQLs) during
639 Query. This looks like a MySQL but but by doing extra releases,
640 the memory goes away. This should fix bug #847.
642 kes When backup fails, cancel SD before waiting for sd termination.
643 kes If SD is waiting for FD to connect during cancel, wake up the
645 kes Fix fsf code so that errno is correctly reported.
646 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
648 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
649 so that Bacula doesn't later stumble into a seg fault.
650 kes Use the term Restore Client in the restore Job report.
651 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
652 the original job's FileSetId.
653 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
654 spooling in migration jobs. Not yet tested.
655 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
656 reading conf file from a pipe. However, do it with open_bpipe()
657 rather than popen. Not yet tested.
659 kes Fix an ugly bug where the VolCatBytes were getting updated
661 kes Implement bconsole memory command that prints current memory
662 usage, plus smartalloc dump.
663 kes Clarify some error messages in backup, admin, and migrate.
664 kes Shrink label dialog to smaller size.
665 kes Invert Cancel OK buttons on restore to be OK Cancel.
666 kes More strerror() to bstrerror() conversions.
668 kes Start implementing bstrerror() in place of strerror().
669 kes Stripping path -- seems to work.
671 kes Prevent door and port files from being restored (mostly
673 kes Free an unreleased buffer in compat code.
674 kes Change console Job name from *Console* to -Console- to eliminate
675 Win32 filename problems. Put Win32 path separator when creating
676 Console file. This fixes bug #846.
677 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
679 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
681 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
682 to force Win32 error message.
684 kes First cut strip path. The data should be passed to the FD,
685 but nothing is done with it yet.
686 kes Enhance the digest and signature routines in the crypto
687 library to accept a JCR and to use it to print error messages
688 so that they will go in the Job report rather than the daemon's
690 kes Simplify some of the verify signature code.
691 kes Simplify a few of the alternative returns in the signature
694 ebl Use only POSIX regex instead of GNU regex in breg.c for
695 File relocation. It fix broken freebsd compilation.
696 kes Convert all other Dir files to use new ua class message
698 kes Tentative fix for missing digest signature in bug 807.
699 kes Correct handle problem in new win32_ftruncate routine.
700 kes Convert ua_purge.c and ua_update.c to use new ua class
701 message routines for bat.
703 kes Correct incorrect installation of LICENSE in Win32 installer.
704 kes Display LICENSE at the beginning of the Win32 install.
705 kes Attempt to correct the need for the png files to be installed
707 kes Reapply my bat.conf install script in qt-console. I think I
708 editted bat.pro instead of bat.pro.in and it was lost.
709 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
710 the /var/lock/subsys for subsysdir. Also corrects typos in the
713 kes First cut update job.
714 kes Correct configure to include qmake of src/qt-console directory.
716 kes Make restore job yes/mod/no print in one command so GUI works.
717 kes First cut implementing backup and restore client.
718 kes Correct editing in Verify output that caused a seg fault.
720 kes Insure that bat.conf is not overwritten during installation.
721 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
722 while I was implementing migration in March 2006 !
724 ebl Cleanup file relocation, using char *RegexWhere instead of
725 char *where + bool where_use_regexp
726 kes Update some manpages and add bat manpage.
727 kes Make a first cut at converting bacula.spec.in for bwx-console
729 kes Apply patch from John Goerzen to add hostname as fourth argument
730 to make_catalog_backup script.
731 kes Fix typos I introduced into bsmtp.c
732 kes Make pm_strxxx() routines handle input of NULL pointer. This
733 is to protect from NULL pointers returned from SQL databases.
734 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
735 kes Add more debug to FIFO code -- fix fifo regression test.
737 kes Implement posix_fadvise in FD, and for reading spool files in SD.
738 kes Add thread timer to bnet_connect() to break from OS if wait time
741 kes Update Win32 build to include new files, new symbols, and
743 kes Implement socket level heartbeat (tcp_keepidle)
744 ebl Commit File relocation patch
745 kes Make bat have 'make install' target.
746 kes Warn during install if old gnome-console binary found.
747 kes Warn during install if old wx-console binary found.
748 kes Add -8 option to bsmtp command line to add content type utf-8.
749 Fixes bug #809. (Character coding problem in bsmtp).
750 kes If < is found in target (from, to, cc) then do not enclose the
751 target in < > in bsmtp. Fixes bug #772 (malformed address).
752 kes When printing certain items in dbcheck, stop after 300000.
753 Fixes bug #822. (dbcheck loops).
754 kes Incorrect status in Dir after waiting for mount with poll set.
757 kes Extend idea of Prefer Mounted Volumes to mean a volume about
759 kes Print waiting to reserve a device every 5 mins.
761 kes Don't call close_part in label.c if tape and relabel.
762 kes Don't free volume if busy in close() -- should help with
764 ebl Fix #824 RunScript bug (After script could be execute twice)
765 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
766 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
767 Add a regression script to test RunScript
769 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
772 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
773 deprecated. No additional bugs will be fixed, and they will be dropped
774 in a future release (probably 2.4.0).
775 kes Change name of wx-console to bwx-console to make it more Bacula
777 kes Change the name of gnome-console to bgnome-console to make it
780 kes Some time in March, a Feature Request with patch from Jorj Bauer
781 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
783 The ability for the director to validate a Client (FD) CN against
784 an arbitrary set of patterns rather than the hostname, with
785 A new 'TLS Allowed CN' set of directives which are implemented
786 in the Client resource. Then pattern matching is used in place
787 of hostname matching against the Certificate's CN. As an example, we
788 have certificates which (a) use a local CA, and (b) have a CN of the
790 kes Add new/changed entry points to Win32 build
791 kes Create unaccepted-projects for projects that are not accepted.
792 kes Simplify locking in the reservations system.
793 kes Add more debug code in reservations.
794 kes Make sure error condition on reserving a volume is handled correctly.
795 kes Correct handling of volume_in_use.
796 kes Correct handling of initializing a device.
797 kes Move handling of broadcasting releasing a device into release_device().
798 kes Correct attaching dcr to dev so that it is only done if device
799 is properly initiated.
801 kes Locking debug level tweaks in SD.
802 kes Tweak new Volume code.
804 kes Add exec external-command [wait-seconds] to bconsole. This
805 executes the external-command. Note! normally external-command
806 should be enclosed in double quotes.
807 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
808 it should normally be off in a production system.
810 kes Implement die command for SD so that we can force it to dump.
811 kes Implement SD lock debug code.
812 kes Implement new algorithm for keeping Volume list in SD. It
813 is now owned by the device.
815 kes Implement new code for freeing in use volumes that should
816 resolve if not all, some of the problems of multiple drive
817 tape conflicts described in bug 801.
819 kes Fix gui/bacula-web/images files in svn.
820 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
822 ebl Fix a bug in batch mode (in string escape)
823 kes Correct migration prune SQL typo that crept in in a
826 kes Move bnet_despool() into class in bsock.c
827 kes Modify job report to include director name and Build OS.
828 kes Move drop root privilege and check_catalog() before fork.
829 kes Add update database scripts (version 9 to 10) to updatedb directory.
831 ebl Check size and age of each file after its backup to see if
832 it has changed during backup, if 'checkfilechanges' is set.
833 The FD will do an extra check (stat(2)) after
834 each file backup. mtime, ctime and size are compared with
835 'before backup' information. If time or size mismatch, an
836 error message will be generated. You must upgrade FD to use it.
838 kes Make database name and user configurable
839 --with-db-name=xxx --with-db-user=xxx
840 kes Add back database type to message.c for debugging.
842 kes Implement dir_sql() which issues an SQL query.
843 kes Modify bat medialist to use dir_sql() and do some minor C++
844 formatting as well as eliminating a number of pointers, simplifing
847 kes Fix some of the mtx-changer grep commands for tape label readers.
848 kes Convert a number of bsendmsg into the appropriate send/warning/error
850 kes Suppress the using database message in the .sql command.
851 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
853 kes Add context menu for floating a window.
854 kes Some minor cleanup and name changes in qt-console
855 kes Add doing mt setblk 0 in Win32 mtx-changer.
856 kes Apply Martin's bug fix to move definition of ENODATA for
858 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
861 kes More pruning cleanup.
862 kes Turn on wait_for_drive by default in mtx-changer.
863 kes Turn on Batch insert code by default as it now passes regression.
864 kes Add ./configure --enable-bat to enable building of Bat.
865 No install yet though.
867 kes Implement a new .sql command for bat.
868 kes Implement code to turn off pruning in obtaining the next volume.
869 Pruning is turned off for the status dir command, but turned on
870 for SD requests and for the list nextvolume command.
872 kes Correct Qmsg() that was not updated correctly when committing a
873 previous change (probably the recent TLS patch).
875 kes Write new subroutine is_volume_purged() that explicitly checks
876 if the Volume is purged, and if so marks it as such. This should
877 resolve problems reported about needing to mount twice to recycle
879 kes Rewrite pruning algorithm to do more work in the SQL engine, and
880 to pass a list of JobIds to be deleted to SQL. Also, minimize the
881 amount of duplicated code.
882 kes Do volume pruning only for the Media Type desired (reduces pruning time
883 if multiple Media Types are in the same pool).
884 kes Implement more detailed info in the Job report for the Bacula version
886 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
888 ebl Add bbatch tool to bench database and insert mode.
889 Fix sql quote stuff in batch mode
890 Fix sql stuff for mysql
892 kes Correct problems with am/pm scheduling. Fixes bug #808.
893 kes Implement new prunning code that prunes up to 1000 jobs at
894 the same time. The same technique can be applied to a number
895 of other prune/purge subroutines.
896 kes Add an insanity check when starting a new tape job to ensure
897 that the tape position has not been changed. If so fail the
899 kes Fix Win32 build for dlls to add the folllowing:
900 src/lib/bsock.c -- new file with new entry points
901 src/lib/dlist.c -- new entry points
902 src/cats/sql_create.c -- new entry point
903 src/cats/sql_cmds.c -- new DATA item exported
905 ebl batch mode cleanup bscan-test is ok now.
906 kes Implement SD code to check length of disk volume before appending.
908 kes Correct return status on db_batch... routines.
909 kes Add call to db_write_batch_file_records() to migration code.
910 ebl Fix AfterJob timing
911 kes Move the checking of the database in initializion of the Director
912 to after we drop privileges. This avoids the need for both root
913 and bacula access to the DB.
914 kes Correct a misplaced variable definition in src/filed/backup.c
915 kes Correct how the new batch insert db_create_attributes_record()
916 uses the arguments. Caused a seg fault in bscan.
917 kes Implement lock() and unlock() methods in DEVICE class.
918 Implement block() and set_block(xx) methods in DEVICE class.
919 kes Modify bnet_connect() so that it uses time() to check for the
920 wait time expiring (on some OSes, some system calls may not
922 kes Modify Verify to obtain the previous JobId when it is actually
923 running rather than at schedule time (as it was in 1.38.x).
924 kes Fix src/job.c to handle MaxWaitTime correctly. This should
926 kes When checking pid in pid file, continue running if the pid is
927 the same as ours. This occurs on IRIX after a system crash.
930 kes Extend new GUI API.
931 kes Make the ua structure a class, and implement send_msg(),
932 error_msg(), warning_msg(), and info_msg().
934 kes Apply fix from for building wx-console on the Mac from
936 kes Implement new select mechanism for GUI programs.
937 kes Reorganize initialization of stackedWidgets in bat.
939 kes Add updated nagios plugin supplied by Christian Masopust.
941 kes More bat implementation.
942 kes File migrate bug with Pool Occupancy using mediaid instead
943 of jobids. Fixes bug #795.
944 kes Fix orphaned buffers in filed backup and verify due to
945 crypto buffers not freed during errors. Fixes bug #789.
946 kes Extend new GUI api code to tree commands.
947 kes Ensure that tree and dot commands check console ACLs.
948 kes Permit marking directory with trailing slash.
949 kes Allow 20 console connections (instead of only 10).
951 kes Add smartctl call to bacula-sd.conf as an example of getting
954 kes Modify jobq.c to let simultaneous restore jobs run. This may
955 cause them to fail if they cannot get a drive.
956 kes Add Client Connect Wait to Storage daemon to permit users to
957 modify the time the SD waits for a FD connection.
959 kes Correct virtual changer check which was backwards. This caused
960 volumes to be unloaded into slots already occupied.
962 kes Apply Command ACL filter to JobId list in restore command.
963 kes Correct typeo in var.c patch.
965 kes Don't let Bacula prune File or Job records for the current Job.
966 kes Fix variable substitution pad + inc bug reported (with patch)
969 kes Correct SQLite log table index as reported by Luca Berra.
971 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
973 kes Begin implementing new comm signals for API.
974 kes Fix a few places in lib/message.c where the open fd may
976 kes Continue implementing lib/bsock.c (real class). Make jcr,
977 who, host, and port private. There are new methods to access
978 them for non-class use. This required touching a number of files.
980 kes Add LANG=C to autoconf/randpass so it works with languages other
981 than English. Fixes bug #788.
983 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
985 You will not be able to generate Include/Exclude list any more.
986 It will be fixed soon.
987 If you want to use this, you can apply
988 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
990 kes Restore of sockets created false error messages because Bacula
991 no longer restores sockets, but the code was still trying to
992 set the attributes on a non-existent file. Reported by a user.
993 ebl finish RecyclePool feature
994 Media will takes Pool.RecyclePool
995 when moving from Scratch to a Pool or when user will do
996 update volume=xxx frompool
997 To use it, add RecyclePool = aPool to your Pool resource
1000 RecyclePool = Scratch
1004 kes Expand new BSOCK class adding signal() and new BNET signals.
1005 kes Begin enhancing the dot commands adding a new API function
1006 that returns more information and will make it easier
1007 to interface to the Director from a program.
1009 kes Make DEVICE fd private. Its new name is m_fd, and can be
1010 obtained with dev->fd() outside the class. This is the
1011 first of many DEVICE members to be made private.
1012 kes Implement Michael Renner's idea on having a virtual disk
1013 changer. I made some minor modifications (e.g. I did not
1014 implement the Virtual Changer directive, but simply set
1015 the Changer Command to an empty string.
1017 kes Implement a BSOCK send() method that writes the whole record
1018 in a single write() request rather than in two.
1019 ebl add update volume=xxx recyclepool=yyyy
1020 volume takes recyclepool from pool when using update volume=xxx from pool
1022 kes Fix encryption deblocking bug, which caused some restored files
1023 to be truncated. This fixes bug #763.
1024 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1025 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1027 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1028 ebl Use btime_t instead of uint64_t in media patch.
1030 kes Optimize the use of the database a bit in the Status dir command.
1031 Only open it when needed, ensure that if any previous database
1032 was opened, it is closed.
1034 kes Correct VolCatBytes bug from media patch.
1035 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1036 in the case of orphaned records.
1037 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1038 and File records in 300K chunks to be more efficient. This
1039 idea came from Juan Luis Frances (if I remember right).
1040 kes Apply Eric's scratch patch that moves a purged Volume to
1041 the RecyclePool. Question: how is RecyclePool set? what
1042 happens to the ScratchPool?
1043 kes Apply Eric's media patch that collects read/write media
1044 times as well as byte counts. This patch requires a
1045 simultaneous upgrade of the DIR and SD. Note, there
1046 should be some way to turn off timing. I'm not sure
1047 times are in Bacula units.
1048 kes Apply Eric's batch-insert patch.
1050 kes Update projects list.
1052 kes Implement Include/Exclude file lists in FD as dlists using
1053 the new dlistString class. This permits efficiently having
1054 large include/exclude lists and completes project Item 25.
1055 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1056 console is authorized to cancel the job. This fixes bug
1058 kes Modify SD so that the VolCatJobs medium record is updated
1059 at the beginning of a Job rather than the end. This
1060 fixes bug #775 where exceeding MaxVolJobs caused jobs
1062 kes Added a mutex around getting and setting Volume information
1063 so that multiple simultaneous jobs will single thread.
1065 Switch to using Subversion
1066 kes Remove src/pygtk-console/ from configure
1068 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1069 plus the entrypoints.
1070 kes Apply patch supplied that corrects debug print
1071 in canceling jobs for max run time. Supplied as
1072 part of bug #621, which was previously fixed.
1074 kes Test on job_canceled() and sd_msg_thread_done inside
1075 loop starting the message thread to avoid a race condition.
1077 kes Remove rl_catch_signal from console.c as it conflicted
1078 with the header definition. Fixes bug #765.
1079 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1081 kes Clarify some stored/acquire messages to indicate if the
1082 problem is with read or append.
1084 kes Fix memory leak with storage ids in cats/sql_get.c
1085 kes Terminate watchdog earlier to avoid reference to released
1086 memory -- reported by Jason Austin.
1087 kes Move closing the database from jobq.c to the director daemon
1088 termination routine. This fixes memory leaks for shadow jobs
1089 (i.e. migration jobs).
1090 kes Free up the unique jobid chain items in migrate.c. This fixes
1091 a memory leak problem.
1092 kes Convert some ugly looking for statements to use foreach_alist
1093 in findlib/find.c. This will facilitate converting the structures
1094 to use dlist (for large include/exclude lists).
1095 kes Fix a bug in the btree.c and btree.h routines, then rename them
1096 rblist and add them to be built in src/lib. Include some new
1097 methods written by Rudolf Cejka that make the code more readable
1098 (hides some of the ugly casting).
1099 kes Add set_next() and set_prev() methods which make the code much more
1100 readable. Also add a new dlistString class that facilitates storing
1101 strings in dlists. To be used in the large include/exclude lists.
1102 kes Make some trivial modifications to lib/tree.h that use rblist
1103 rather than dlist for storing the tree links. This was suggested
1104 by Rudolf Cejka. The result of this is that the restore tree now
1105 uses red-black binary trees rather than simple linked lists. This
1106 should give rather dramatic speed improvements for directories
1107 contining large numbers of directories/files (more than 10000).
1109 kes Fix maxruntime bug #621.
1111 ebl Implement the include JobID in spool file name project.
1112 kes Reorder projects file in order determined by Jan 2007 vote.
1113 kes Implement item #12 on project list -- quick release of FD by
1115 kes Fix open of SQLite3 db where user does not have write permission
1116 so that DIR does not crash. Fixes bug #761.
1118 kes Add back missing @ in Win32 Makefile.
1119 kes Change 'Device not configured to autolabel' from INFO
1121 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1122 which should restart an indefinite # of times.
1123 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1124 other DIR specifications.
1126 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1127 Fix path quoting in SQLite scripts.
1128 Fix problems with SHGetFolderPath.
1130 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1132 kes Fix Job restart on error bug that promotes an Inc to a Full
1133 backup. This should fix bug #755.
1134 kes Add qt-console and first cut of code.
1138 kes Fix Bacula->Documentation link on Win32 to point to index.html
1139 instead of bacula.html. Fixed bug #750.
1140 kes Return JobId in db_get_job_record() when JobId==0. This should
1142 kes Do not release source pointers when restarting a failed job.
1144 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1145 This *should* fix bug #747.
1146 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1149 kes Modify USTORE constructor to set an empty store_source string,
1150 and don't copy the store_source string in a cancel. Hopefully
1151 this will fix Arno's seg fault, bug #744.
1152 kes Add back code to disable conio in configure. Fixes bug #743.
1153 kes Correct the Options scanner in the FD to correctly handle
1154 SHA1 option, which was eating the next option. Reported by
1156 kes Add code to indicate when the SD is spooling, spool wait, and
1157 despooling as requested by Alan Brown.
1159 Version 2.0.0 released: 4 January 2007