1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Add debug times, reduce size of two-pool-changer test
30 ebl Tweak autoconf scripts for faketape
32 kes Improve SD reserve debug code.
33 kes Testing an improvement to free up volumes no longer in use.
35 kes Rework SD acquire for read to handle autochanger Volume
37 kes Implement regression that explicitly tests swapping a Volume
38 from one drive to another.
39 kes Enhance disk-changer to detect most error conditions.
40 kes Fix SD code so that it properly swaps a Volume between drives.
43 kes Apply libdbi patch from Joao Freitas for regress and for
44 Bacula trunk. Regress now works with libdbi. Nice.
45 kes Apply .nobackup patch from bug #1077 submitted by
47 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
48 name into jobs cloned via the run directive.
50 kes Prevent a Volume that is being swapped from being freed from
51 the volume list. This will most likely fix, at least partially,
53 kes Fix strippath so that it does not get a buffer overrun and crash FD.
55 kes Remove 50 millisec wait in SD that broke debugger.
56 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
57 that a job may run, counted from when the job was scheduled.
58 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
59 a job may block waiting for a resource, counted from when the job starts
60 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
61 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
62 that implements multiple commands per line in the console when using
63 readline. Modify the default to use a semicolon as the command separator.
65 ebl Fix SQL query in migration code.
66 ebl Make accurate mode with hash disk pass regression tests
68 ebl Implement first cut of accurate backup with hash disk.
70 kes Force unload of volume when wrong volume mounted in SD.
72 kes Fix bat seg fault at termination.
73 kes Add Bacula generated version to bat about box.
76 kes Experiment with allowing multiple read jobs.
77 kes Move final volume swapping code to DCR method and
78 call it from acquire_for_read().
79 kes When wrong volume is mounted during read, unload_autochanger.
81 kes Integrate the libdbi changes from Joao Henrique Freitas
83 kes Stop searching for Volumes in SD askdir if DIR returns the
84 same volume name twice in a row.
85 kes Close bat console windows first to eliminate error message
88 kes Tweak the swap Volume from one drive to another code so that
90 kes Resolve several problems with recycling that broke the new
91 code (these problems are in 2.2.9 as well).
92 kes Remove the volume lock when calling the sysop code.
93 kes Don't mark a reserved volume with no writers as unused otherwise
96 kes Rework class structures for VOLRES, DCR, and DEVICE to make
97 the method names a bit more logical, and for more logically
98 handling the responsibilities.
100 kes Remove redundant code in terminating the scheduler that just
101 causes a seg fault in many cases.
102 kes Cleanup releasing a volume and make it a DCR method.
103 kes Improve algorithm for detecting pre-reserved volume and
106 kes Tweak volume swapping code so it works.
107 kes Correct name overloading in mount.c
108 kes Replace released flag in VOLRES with reserved and add access
109 methods for the VOLRES class.
110 kes Prevent volume from being released while being swapped.
111 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
113 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
115 kes Refactor parts of stored/mount.c
117 ebl Add sanity checks for VolWriteTime and VolReadTime
118 ebl Take care of bad clock changes while computing VolWriteTime
119 and VolReadTime. This should fix or limit #1066
120 kes Correct error string numbers in dird/catreq.c
121 kes Restructure reserving, acquiring, and mounting volumes. Calls to
122 autochanger are deferred for mount.c -- simplifes the code.
124 kes Do not prune any running job. It just fails the job.
125 kes Lock the volumes when changing dev->reserved_device and marking
126 the volume unused otherwise the device can get reserved by
127 another job before the volume is released, thus blocking it.
129 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
130 kes Fix bug #1063, reuse of freed ptr in list nextvol.
131 kes Release regex compile buffer in filed/job.c
132 kes Add proper type of const char in sql_create.c
133 kes Turn off debug in daemon termination routines
134 kes Move free_volume_list() before devices are freed in stored.c
135 kes Fix reference to uninitalized stack variables in bregex.c.
136 This should correct bug #1067.
138 kes Fix possible seg fault in SD when freeing a volume entry.
140 kes Implement unload_dev() before swap device.
141 ebl Add statistics prunning with option and menu
142 kes Separate unload_dev() from unload_other_device() in autochanger.c
144 kes Apply patch from bug #1069 that corrects spurious error messages
145 when ACLs enabled on SGI but no ACL exists.
146 ebl Fix small segfault in bacula-sd when debug level is 500
147 kes Modify run_program() and run_program_full_output() to use
148 call by reference for the results string. This corrects a long
149 standing problem where the address of the string may be changed
150 in the subroutine but not in the calling program.
152 kes Re-enable code to remember last volume mounted on a non-tape
154 kes Add patch supplied in bug #1068 that fixes a SD crash when using
155 a Virtual autochanger.
156 kes Generate correct JobMedia records during spooling/despooling when
157 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
158 <tih@hamartun.priv.no> for excellent analysis and testing.
160 kes Tweak hash algorithm for htable using Martin Simmons idea
161 for doing a circular shift.
162 kes Remember what volume is in VTLs (previously turned off for
164 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
165 pointed out some problems in creating JobMedia records during
166 spooling with concurrent jobs. Fix the problem by updating the
167 start file position before despooling and generate a jobmedia
168 record at the end of despooling.
170 kes Fix handling of JobMedia records during spooling and when a
171 Volume is changed without actually writing data to the Volume.
173 kes Rework certain SD locking based on gdb tracebacks of deadlocks
174 sent by Eric. This code now uses only the volume_lock() rather
175 than the reservations lock when at EOM and acquiring a new
177 kes Ensure only one exit point in several subroutines.
179 kes Implement bsock code to permit locking. Use the new code in Verify
180 in the FD to prevent the heartbeat thread from disrupting the Verify
181 data sent to the Dir.
182 kes Modify SD locking to eliminate locking the reservations system from
183 outside the system. Use the volume lock when getting media data
184 and reserving a new volume at end of media.
185 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
186 when SD starts are not locked into place.
188 kes Fix error compiling runscript code on 64 bit machines.
189 kes Tweak Win32 mount point code.
190 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
191 cleared giving bad file estimate).
192 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
195 kes Keep Schedule run lists in order as suggested by
198 kes Implement autostart scripts for Debian.
199 ebl Implement upgrade catalog scripts.
201 ebl Apply jobstat patch for long term statistics. Have to implement
202 purge stats command and upgrade scripts.
203 kes Fix mtx-changer.in for broken Debian mt program.
205 kes Fix large number of JobMedia records reported by Eric Bollengier.
207 kes Apply doc fix from bug #1062.
208 kes Resolve crash and improper restore wx-console Win32 restore
209 GUI. Fixes bug #1065.
210 kes Update Win32 wxWidgets to latest version.
211 kes Attempt to do correct handling of Win32 mount points. Should
213 kes Fix Win32 FD backup/restore memory leak due to improper termination
214 of BackupRead/Write. This fixes bug# 1038.
216 ebl Reduce memory usage for accurate backup, working only with ctime
217 and mtime. (not all Lstat field)
218 About 40MB for my linux system (400.000 files)
220 kes Add dcr->reserved_volume flag that allows us to release a volume
221 even if it is not vol->released. This allows maxvol2 to work when
222 Volumes expire and we are already writing to the device (i.e. a
223 volume is pulled out from under us by another job terminating after
224 we reserve the drive).
226 ebl Permit multiple command/console per runscript definition.
227 RunScript { command = /bin/true ; command = /bin/false ... }
228 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
229 (restart an application) just after the VSS snapshot on windows.
230 kes Don't zap dcr values during release_volume() as they might
231 have the next Volume to be mounted.
232 kes Fix AIX prototype.
234 kes Second cut of drive switching during backup.
237 kes Update Win32 version of wxWidgets to most recent version.
238 kes Tweak Copy job details.
239 kes Rework dir_find_next_appendable_volume to make a bit more effort
240 to find a suitable volume before giving up.
242 kes Make ask_sysop_to_create... to return if waken from wait.
243 This helps get out of blocked conditions.
244 kes Experimental implementation of switch_device in reservations.
245 kes Implement FD version to allow easier protocol changes.
246 kes Add Plugin Options string -- not yet passed to FD.
247 kes Implement PluginOptions ACL.
249 kes Attempt to correct problems with restores with autochangers and
250 use counts going negative
251 kes Rework SD status command and implement API for bat. Implements
252 header, runing waitreservation, devices, volumes, spooling,
253 and terminated status keywords.
254 .status storage=xxx <keyword>
255 kes Clarify TLS error message by adding double quotes around name.
256 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
257 kes Pass jcr to tls routines so debug messages can be handled better.
258 kes Rework jobq resource allocation code, and possibly fix a bug
259 that caused reference counts to get out of sync.
261 kes Rename fd/dir plugin to use Bacula standard underscore.
262 kes Plugin work -- bring dir up to fd level.
263 kes Start implementation of VTL code
264 kes Fix Win32 build after adding new cats subroutine.
266 kes First cut at Duplicate Job implementation.
268 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
269 kes Start PluginOptions string, and refactor a bit of ua_run.c
270 ebl Apply Allan patch that permit to reset recyclepool.
272 kes Test patch -- possible fix or improvement for bug #1053
273 kes Refactor FD and SD status commands to permit new API code in
274 SD, and to fix Win32 build.
275 kes Win32 build is now working.
277 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
278 some ideas in patch from Scott Bailey.
279 kes Begin implementation of duplicate Job control.
280 kes Fix some of Win32 build after recent additions.
281 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
282 which causes the FD to detect whether or not the OS has the
283 honor no dump bit (*BSD systems), and if so, to skip backing up
284 any file with this bit set. The feature is enabled by setting
285 'honor no dump flag = yes' in the Options section of a FileSet.
287 kes Correct po warning message with datarootdir
288 kes Implement more code in dird.c to put configuration parsing in
289 a class rather than use globals.
290 kes Restructure SD status command for implementation of bat API
293 kes Suppress incorrect 'Will not descend from x into y' messages.
294 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
295 daemon globals used by parser.
296 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
298 kes Fix free of plugin_list when none exists.
300 ebl Apply accurate project patch.
302 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
303 on non-mempool object)
304 kes First cut of converting FD .status to work with bat API.
306 .status client=XXX header
307 .status client=XXX running
308 .status client=XXX terminated
309 kes Implement first cut of Copy Job.
310 kes Implement Catalog in Pool resource. It overrides catalog specified
311 in the Client resource.
313 kes Apply patch (with some difficulties) from Joao Henrique Freitas
314 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
316 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
317 ftruncate() actually works. In the case of some (cheap) NAS devices,
318 it does not, and so recycling NAS Volumes does not work. The code
319 simply unlink()s the file, then recreates it. This fixes bug #1011.
321 kes First incomplete cut of big malloc blocks for htable.
322 kes Tweak plugin code.
324 kes Plugin debug code + tweak a couple bat dialog layouts
326 kes Fix creating first JobMedia record during Migration to include
327 proper index. This caused slow restores of migrated jobs.
328 kes Temp fix to plugin name file_index.
329 kes Bacula backed up and restored a MySQL database.
331 kes Implement plugin restore.
332 kes Implement parsing of db_driver to give db_type index.
334 kes First cut of plugin restore code.
335 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
336 and do not strip paths on symbolic links.
337 kes Set catalog backup database and user name from values specified on
338 the ./configure line.
339 ebl Fix #1031 about wrong pool source information in job report.
342 kes Remove a redundant jcr argument to find_files, match_files, and
344 kes Implement '.status dir header|scheduled|running|terminated' that
345 prints the requested status section. With the exception of the
346 header, the other reports have fields separated by tabs (\t).
348 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
349 a resource embedded run command to find a since time if no explicit
350 since time was supplied on the command line.
351 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
352 that updates the state file at job termination time in addition to
353 when the daemon terminates.
355 kes First version where a plugin did a backup.
356 bpipe-fd.so created a backup file, wrote a test
357 string to it, and Bacua could restore this fabricated file.
359 kes Implement DB Driver = string for the DBI driver.
360 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
361 kes First cut of code for loading Win32 plugin dlls. Implement
362 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
363 and implement a dlfcn.h file based on opengroup's definitions of
366 kes First cut plugin directives.
368 kes Apply patch from bug #1049 to prevent stripping the path on a
370 kes Attempt to fix bug #1047 where stripping a path corrupts the
371 heap. Waiting for feedback.
372 kes Correct the Mount message not to suggest labeling a new tape
373 when doing a restore. Submitted by email by John Stoffel.
374 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
375 FD by using casting. Reported in bug #1042.
377 kes A bit of crypto cleanup. More later.
379 Release Version 2.2.8
381 kes Apply patch from Martin to correct bug #1040, bscan sets existing
383 kes Fixed important spelling error in doc -- bug #1045.
385 ebl Fix bextract to be able to extract non-portable Win32 data to
387 kes Move initialization of read/write res lock earlier in the code.
388 This fixes the crash with a null conf file. This fixes bug
390 kes Redefine CURES in lib/parse_conf to be URES and move it all
391 into lib/parse_conf.c -- this responds to bug #1042, but does
392 not fix it. The fix is not to compile with FORTIFY_SOURCE.
393 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
394 the trunk SVN. I don't think this was reported as a bug.
396 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
398 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
400 kes Add DataDespooling and DataCommitting status (committing is
401 the last despooling).
402 kes Finish implementation of new reservations code noted below.
404 kes Fix bsnprintf for float point numbers. I broke recently when
405 parameterizing some variables. This fixes bug #1036.
406 kes Undo recent reservations changes ... will apply them later
407 when they work better.
409 ebl Fixes #1034 which cause mysql to hang the connection after 8h
410 ebl Change default statistics target of filename.name and path.path
411 fields for PostgreSQL. This speeds lookup by indexes. Thanks
413 kes A few more tweaks to new reservation code. Make sure to clear
414 vol released flag when retaking volume. When reading label and
415 label is bad mark volume unused. When recycling, mark volume
416 unused so it can be renamed.
418 kes Fix reserve_volume() so it doesn't release a volume in use
419 (i.e. a volume entry not marked released). This should be
420 the last part needed to fix bug #1018.
422 kes Move Heartbeat documentation from Job to Director resource.
423 This fixes bug #1033.
425 kes Fix existing switch drive SD code to call autochanger to release
426 any old volume. This must be done to keep the autochanger from
427 releasing subsequently newly reserved volumes in doing a close().
428 This should fix bug #1018.
429 kes Fail if attempting to get console input in batch mode. This
430 should help fail RunScript console commands that are incomplete.
431 kes First cut implementing switch_drive() in SD (not actually called).
433 kes Implement first cut running console commands in a RunScript.
435 ebl Fixes bug #1028 where 'Selection Type' option was not usable
437 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
440 Release Version 2.2.7
442 kes Add new free_tls() entry point so that Win32 builds.
443 kes Fix compile warning in src/lib/util.c
444 kes Fix entry point for edit_job_codes() so that Win32 builds.
445 kes Fix seg fault Frank Sweetser reports in regression testing
446 on his systems. The problem was that the original author of
447 bsnprintf.c did not take into account the side effects of
448 using ++x in the argument to a #define.
449 kes Make SD protocol backward compatible with version 2.2.x.
451 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
452 because Bacula no longer restores sockets.
453 ebl Always use ignorecase fileset option on win32 FD.
455 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
456 that implements double quoting include names in conf files,
457 and also allows piping input by having the first character
458 be a vertical bar (|).
459 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
460 that implement %f in RunScripts to pass the FileSet name.
461 kes Skip leading | when lex input comes from a pipe as suggested
462 by Michael Stapelberg <michael@stapelberg.de>.
464 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
465 Nerijus Baliunas <nerijus@users.sourceforge.net>
467 kes Implement Plugin Directory and plugin events.
469 kes Implement a security enhancement: TLS authentication but no
470 encryption. Enabled by setting 'TLS Authentication = yes'.
471 Note when this is on, TLS encryption is turned OFF!
473 kes This patch corrects a problem where the maximum concurrent storage
474 jobs counter gets out of sync during restore jobs causing jobs to
475 'wait on max Storage jobs'. This patch fixes bug #1009.
477 kes This patch fixes bcopy so that it produces correct Volumes.
479 kes This patch eliminates spurious output to the console during a VerifyVolume
480 job that contains encrypted data. It fixes bug #1024.
482 kes This patch prevents the 'status dir' command from trying to use a scratch
483 volume and possibly moving it from one pool to another. This patch fixes
486 kes Add new include to postgresql.c suggested by Marc Cousins so
487 that it compiles correctly with pgre version 8.3.
489 kes Fix --archivedir addition to configure. Replace it with
490 --with-archivedir in configure.in This fixes the regression
492 kes This patch fixes bug #1012 where the job is canceled because
493 of Max Run Time exceeded when the job has not yet started.
495 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
496 one 'part' to write. Instead of each part being stored on disk,
497 written to DVD, then deleted from disk, all parts are written to disk,
498 and only the last is written and deleted from disk.
499 kes This patch fixes the status command to include the formating string for
500 JS_AttrInsterting. It fixes bug #1021.
501 kes This patch should fix the Mac OS X build problem on the latest
502 Darwin, where sys/types.h was not included correctly (apparently
503 due to a change in the Mac headers). The solution was to explicitly
504 ensure that it is defined for the ./configure.
505 This patch also has a rebuild of configure that includes the Debian
506 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
507 kes This patch should ensure that queued messages to the console are
508 displayed as soon as possible. It should fix bug 1007, but has been
509 reported not to work.
511 kes This patch fixes the infinite loop when trying to increase the
512 maximum number of volumes in a Pool during the add command.
513 This patch fixes bug #1008.
515 Release Version 2.2.6
517 db Remove extra data on estimate command in joblist for bat.
519 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
520 really change anything, but is the beginning of doing it *right*.
521 To do it completely right the LastWritten date must be passed to
522 the SD, but it is not yet done.
523 kes Minor tweaks to some bat restore SQL.
524 kes This patch fixes bug #1003 where putting the message output from
525 a Verify job into the catalog results in a recursive loop. The problem
526 seems to show up only with postgresql (to be verified).
527 kes Correct %x to %p in postgresql debug statement.
529 kes Fix bug #942 where lots of emails where generated when the heartbeat
530 interval was low and Bacula wanted a different tape from the one in
533 ebl Add new SD despooling attributes and Dir inserting attributes
534 job status codes in the catalog (Status table).
536 ebl Use qmake-qt4 instead of qmake when available (debian system).
538 kes Add a security warning to src/cats/make_catalog_backup.in indicating
539 that passing the password via the command line (arg 3) is insecure.
540 This responds to bug #990 (it doesn't fix it).
542 kes Set default debug_level to zero. This corrects bugs #991 and #993.
543 kes Fix a crash in bat when it cannot connect to the Director for example
544 if the Director is not running.
545 kes Remove redundant INDEX (JobId) from File table in the trunk.
547 kes Make explicit exception to GPL in LICENSE to permit linking
548 the Win32 FD with Microsoft VSS code.
549 kes Apply the Solaris package patch from
550 Masopust, Christian <christian.masopust@siemens.com>
551 kes Apply the patch to optionally add a timestamp in the debug output
552 submitted by Mariusz Czulada <manieq@wp.eu>.
554 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
555 backend (sql_strerror). Fixes bug #989
557 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
558 It applied with no problems.
559 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
561 kes Redirect stderror to stdin on mt status command in mtx-changer.in
562 since the status is returned on stderr on Solaris.
563 kes Activate Close button on tray-monitor window. This fixes
565 kes Check for NULL item in parse_conf.c before calling it. In the
566 case of Device, there is no item and this caused a seg fault when
567 Device appears in the conf file.
568 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
569 avoids pulling in config.h multiple times in some new code.
571 kes Fix spurious warning message printed when creating a volume with
572 a LabelFormat. This fixes bug #976.
574 Release Version 2.2.5
576 kes Add JobId in place of Job name in all the Jmsg() output.
577 kes Correct the APP_DESC for the Win32 storage service (remove an e).
579 kes Make maxvol-test and new more strict maxvol2-test work.
580 kes Print JobId in all Jmsg() job output.
582 kes Add new SD despooling attributes and Dir inserting attributes
583 job status codes. This fixes bug 961.
584 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
586 kes Fix doc issue. This fixes bug #963.
587 kes Fix listing performance problems in bat. Pointed out by
589 kes Remove old debug code.
590 kes Fix bat code that tests for Win32. This should fix bug #968
591 kes Query 5 list wrong Vol after migration. This fixes bug #960
593 ebl Fix #969 where user can't change Replace option in restore menu.
595 kes Save jcr in thread specific data (tsd) for each thread.
596 kes Make Dmsg() print JobId as -%u.
597 kes Make Jmsg, Emsg, and others automatically pickup the jobid
598 for the thread if it exists.
599 kes Remove old reservation debug jid code.
600 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
601 ebl Add an option that permit to specify spool size in job
602 definition. (Applying patches/testing/spoolsize_per_job.patch).
603 You must upgrade SD and DIR at the same time.
604 dvl Add new configuration item --archivedir
605 dvl Adjust regression tests to use tmp not /tmp. This will allow
606 multiple concurrent runs of the regression tests.
608 kes Fix race condition that drops final block written to volume.
609 This happens in rare cases with multiple simultaneous jobs
610 when the Volume fills. This fixes bug #964. May be related
611 to bug #935 and possibly #903.
612 kes Eliminate more strerror() and replace with bstrerror().
613 kes Remove BSD getopt and replace with unrestricted IBM version.
614 kes Fix Win32 build for changed calling sequences.
615 kes More tweaks to the mount volume routines to get everything
616 right. Changed variable name from find to have_vol, which is
617 much easier to understand.
618 kes Enhance btimer debug code.
620 kes Fix FD->SD authorization failure, which was due to spurious
621 wakeups from a pthread_cond_timedwait(). Simply check the
622 predicate before continuing. This fixes bug #953.
623 kes Add const char where needed (more to do). Remove temp debug code.
625 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
626 kes Don't overwrite error message in check_tables_version.
628 kes Unlock batch insert tables with same calls used elsewhere.
629 kes Allow starting 59 jobs a second.
630 kes Make SD session key more random.
631 kes Add retry for SQLite opening db if it fails. Probably helps
633 kes Suppress extra error messages during batch insert failure.
635 kes Add jcr to timer packets so if killed message can be sent to job.
636 kes Add JobId to all Dmsg() output.
637 kes Put some FD auth code on dbglvl rather than fixed.
638 kes Return insert attributes error message in db msg buffer to avoid
639 false error messages. Helps fix bug #966.
640 kes Separate batch init error messages. Probably helps fix bug #966.
641 kes Make SD code that contructs attribute insert check string lengths
643 kes If Dir gets an error during inserting attributes, cancel SD.
644 This reduces unnecessary error messages.
646 kes Correct search boolean for getting Volume info
647 ebl Cleanup batch insert code. Probably fixes bug #965.
648 kes Back out one small change to the reservation system (reserving a volume).
649 kes Rework how a Volume is mounted. It is now much more intelligent and
650 will always attempt to use any mounted volume if possible and reduces
651 calls to the Director asking about volumes.
653 kes Turn off some code when batch insert not enabled.
654 kes Edit FD name in connect error messages.
655 kes Rework the reservation system to take into account that the Director
656 might give us a Volume that is different from the current one being
657 used, and to ensure that we don't exceed Maximum Volume Jobs.
658 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
659 fatal error with multiple jobs running'
660 kes Add more debug code in reservation system.
661 kes Implement maxvol-test to check bug #947.
663 kes Add code to handle tray monitor separated from Win32 FD.
664 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
666 kes Add missed return in fixing verify bug -- trunk only.
667 ebl Fix a command parser issue causing a director segfault.
668 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
670 kes Increase the max block size to 4MB fixes bug #957.
671 kes ERABT if user sets min block size > max block size. Fixes bug #956.
672 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
673 is not properly mounted (recognized) during a poll.
674 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
675 Job that has differences reports Verify OK.
676 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
678 ebl Add an option to operate on all pools with update vol parameters.
679 This complete the project 20. Patch from Nigel Stepp.
680 ebl Add history support to bconsole when using readline.
681 Using Ctrl-D to exit doesn't update .bconsole_history
682 kes Modify new volume algorithm to use max MediaId for generating next
683 volume number rather than the count of Volumes. This should essentially
684 eliminate the failure rate if some volumes were deleted. Bug #921.
685 kes Begin implemention of Optimize Job Scheduling.
686 kes Implement restore callback that Dirk and I agreed on for bat
687 restore. This fixes bug #928. Restore of backup of zero files fails.
688 kes Fix SQL Catalog logging which broke with new db_escape_string
691 Release Version 2.2.4
693 kes Fix bacula_cats.def for new db_escape_string().
694 kes Increase size of name string when FD making connection to SD.
695 May fix bug #953. FD->SD connection failure.
697 kes Add code to help Dan debug 2drive-incremental-2disk test.
698 kes Add code to try to fix bug #908.
699 kes Add waits to multiple exit detection code to try to force pid
700 file to always be deleted.
701 kes Restore good dev.tar.gz to rescue set appropriate binary property.
703 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
704 trying to switch drives by checking for blocking before unblocking.
706 kes Cancel storage daemon in all cases where FD reports error. This
707 should fix virtually all cases of bug #920.
708 kes Fix db_escape_string() for MySQL which did not compile.
710 kes Fix error message that was clobbered when Dir tells SD it does not
711 have write permission on Volume. This should fix a minor point
712 in bug #942, but not the main problem.
713 kes Add code to cancel job in SD if FD connection fails. This should
715 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
716 dvl Pass jcr and db into db_escape_string() to enable better escaping
718 kes Fix migration code to get correct Volume name with multiple volumes
719 by skipping |. Fixes bug #936.
720 kes Implement patch supplied by Landon to fix bug #944 where using
721 TLS with bconsole uses 99+% of the CPU.
722 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
724 kes Move patches into patches directory.
726 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
729 ebl Using 'm' in bconsole will show messages like before,
730 and not memory usage.
731 kes Fix bug #935, and probably also bug #903 where files were not
732 restored. MediaId was not properly set in JobMedia record after
735 kes Suppress chown and chmod error messages if the FD is not running
738 kes Apply Martin Simmons' patch that should turn off the new API usage
739 when batch insert is turned off allowing building on older
741 kes Add ./configure search in qwt-qt4 for qwt package
743 kes Bacula is now free of 3rd party GPL copyrighted code!
745 kes Add guid_to_name.c/h which replace idcache.
746 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
748 ebl Detect if new PosgreSQL batch insert API is present.
749 kes Correct incorrect mempool call causing Director crash. Occurs on
750 systems without va_copy().
751 sb Update spec files for 2.2.1 release
753 kes Fix memory pool call in ua_output.c. bug #934.
754 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
755 Add test program to fnmatch.c
757 kes Integrate patch to README.vc8 from
758 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
759 edit it to get it into Unix patch format.
760 kes Implement mkpath.c to replace old FSF makepath.c
762 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
764 Release Version 2.2.1
766 kes Update POTFILES.in
767 kes Cleanup a few underquoted AC_DEFUNs in configure
768 kes Apply patch from Martin Simmons that adds a test for va_copy to
771 kes Fix bug #921 by increasing the number of tries to create a new volume
773 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
774 can be called multiple times. Implement a version for machines
775 without va_copy() that gets a big buffer.
777 kes Integrate more portable zone offset code into bsmtp.c
778 Submitted by Attila Fülöp.
780 kes Fix bad SD->FD return status reported by
781 (James Harper) <james.harper@bendigoit.com.au>
782 ebl Fix a bug in read_close_session which return random status
783 thanks to James Harper
785 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
786 and directory names during restore of single file/directories.
787 kes Add sanity checks to .sql command when string is empty. Hopefully
788 that will resolve Dirks Director crash.
790 kes Apply patch submitted by Martin Simmons that corrects a seg fault
791 in the bsmtp chat subroutine when debug is >= 10.
793 kes Fix Director crash when running bat SQL queries.
794 kes Add David's notes on Item 8: Copy pools.
796 kes Rework projects file to be current and ready for a vote.
797 kes Enhance lex scanner error message.
799 kes Tweak LICENSE file to mention BSD code.
800 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
801 if specified on the ./configure.
802 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
803 This class is intended to allow us to open a second bsock to the
804 Director while in the restore subdialog.
806 kes Fix configure to create bat Makefile before creating dependencies.
807 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
808 kes Add a tooltip to the tray monitor.
809 dvl Set the Director's PID file before dropping privs. This fixes
812 kes Update AUTHORs file
813 kes Increase the default max concurrent jobs to 20 in FD and SD to
814 correspond with the default .conf files.
815 kes Rewrite the Win32 service routines. This eliminates the 3 copies
816 some different, of the same file created by RN when porting the
818 kes Rearrange some of the Win32 directories and the placement of the files
820 kes Set DEVELOPER flag in version.h
822 ========================================================================
823 Release Version 2.2.0
825 kes Apply a second doc patch from Marc.
826 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
827 improves the tips section that discusses how to setup multiple
830 kes Update bat README file.
831 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
832 corrects a typo in the Recycle status check in db_find_next_volume().
833 This will probably fix a number of annoying problems with multiple
835 kes Modify most of dird/msgchan.c to use bsock class calls rather than
836 bnet calls -- no functionality change.
838 kes Modify the Verify output to specify if files are missing on
839 the Volume(s) or disk. Fixes confusion in bug #916.
840 kes When more than one Volume is read in a migration job, the last
841 Volume bytes reported are from the last read volume rather than
842 the last written volume. Fixed. This fixes bug #910.
843 kes Fix display of Recycle flag after update volume=foo recycle=yes.
844 It previously printed New Recyle flag is: no. This fixes bug
847 kes Correct seg fault when switching tape drives during restore.
848 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
849 be used until after 2.2.0 release.
851 kes Remove fnmatch() in SD that permitted wild card specifications.
854 kes Fix %g in filename returned by SQL for browse tree reported by
856 kes Fix configure so that it puts config.out in the cwd rather than
858 kes Attempt to fix the locking problem reported by Eric in bug #906.
859 kes Make berrno class to leave errno unchanged after constructor call.
860 kes Make bnet_server use the heap rather than the stack to allocate
861 its socket fd pointers to avoid a crash at termination. Problem
862 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
864 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
865 and putting it in depkgs-qt along with Qt4.3.
867 kes Rework code in acquire.c that switches drives for reading when
868 the Media Type does not match. This should fix bug #906
870 ebl Fix a director segfault during job setup #907
871 kes Correct seg fault in postgresql when first operation returns no
872 rows. Fixes Dirks File browser problem seg fault with bat.
874 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
875 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
878 kes Implement PopUp YES/NO dialog for bat.
880 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
882 kes Correct RunScript to terminate job in FD on failure.
883 kes Change abort_on_error and AbortJobOnError to fail_on_error
884 and FailJobOnError in RunScripts.
885 kes Minor tweaks of code formating in RunScripts, principally to
886 avoid depassing 80 columns.
888 kes Eliminate one #ifdef Win32 in bsmtp
889 kes Implement grow tool to grow a file for testing very large databases.
890 kes Add big-vol-test to test Bacula seeking with > 5GB.
893 kes Modify find_next_volume() to return all values in Media record.
894 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
898 kes Update Release notes
900 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
901 Warning, in previous beta version, all media get from scratch keep their
904 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
905 This should fix bug #842. Made a note to look at removing the temp
906 files at the end of the install.
907 kes Add ability to mount and unmount a file device providing it is
908 marked as being removable and has the appropriate mount and unmount
909 commands defined in the Device resource. This fixes bug #830.
910 kes When applying a storage override, release all previous storage
911 definitions rather than just prepending the new storage.
912 This should prevent a good deal of confusion.
914 kes Implement ./configure search for qwt libraries.
916 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
917 Win32 FD. This should fix bug #893.
918 kes Remove an unnecessary beep in Win32 init code.
919 kes Update copyright dates in Win32 executable about boxes.
920 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
921 code with a BSD getopt.c and getopt.h.
922 kes Remove sched.h from the Win32 compat directory -- not used.
923 kes Remove the Exit menu item from the Win32 tray monitor. If you really
924 need to shut it down, do it through the services panel or the command
926 kes Remove some inappropriate Bacula FSFE copyrights.
927 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
928 kes Fix regress config non-portable test as pointed out by
929 Florian Heigl <florian.heigl@gmail.com>
930 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
931 as pointed out by Florian Heigl <florian.heigl@gmail.com>
933 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
934 Reported by Frank Sweetser.
938 kes Fix client-only build.
939 kes Integrate client-only fixes for bsys (initgroups) and conio from
940 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
941 kes Make arguments to get_scratch_volume() in same order as other
943 kes Rework the prune_volumes() subroutine so that after purging and
944 no volume found in desired pool, it will check for a scratch
945 volume. This prevents recycling the whole scratch pool.
946 kes Add code to status storage to print boffset_t (largefile support).
948 kes Move qwt (Graphics libarary for Qt4) to depkgs.
949 kes You now need a --with-qwt=<dir> to be able to build bat.
950 kes Update src/win32/cats/bacula_cats.def to include the new
951 db_get_query_dbids() call on Win32.
953 kes Correct a problem when selecting a scratch volume and moving
954 it to another pool that lost some columns.
955 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
956 kes Enhance Autochanger error messages to include Volume and device name.
957 kes Rework prune_volumes() code to take account of InChanger flag,
958 and to handle recycling volumes going to the Scratch pool and
959 current pool because the RecyclePool directive.
960 kes Implement a better and more efficient db_get_query_dbids() to
961 handle creating and passing back a list of DBIds.
965 kes Start work on new more efficient DBId subroutine. First use
966 will be for recycling volume to Scratch inchanger.
967 kes Increase number of JobIds in pruning from 1000 to 10000.
968 This to be replaced by above routine.
969 kes Begin implementation of building Qt4 on Win32.
970 kes Correct typo in fix I added for bad TLS shutdown.
971 kes Pull 2.0.3 patches into patches directory.
972 kes Update Release notes. Include qt-console in line count.
973 kes Update Projects file.
975 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
976 bug in migration code where a job that spanned two volumes
979 kes Implement new BST_DESPOOLING blocked state. Change from locking
980 during despooling in SD to blocking. This means that other threads
981 can work with the device structure, in particular the reservations
982 system while despooling.
984 kes Fix return in reservation message queue that missed clearing
985 the jcr lock (implemented 26Jun07 below).
986 kes Rename a number of dev methods to make locking function names
988 kes Document locking in lock.c. Move lock structures to new file
991 kes Move reservations message lock to lock jcr only this
993 kes Move main SD locking code into lock.c (new file).
994 kes Update Win32 build to include lock.c
998 kes Dirk committed the qwt library code for drawing graphs in bat.
999 kes Tweak install of qwt so that it is integrated with ./configure.
1001 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1002 out by Eric (my typo).
1003 ebl Fix configure.in to get batch mode enable
1004 kes Return correct string from authenticate.cpp in bat when connecting
1006 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1007 spurious line drops when using TLS.
1008 kes Do not file reparse points when restoring a file that already
1011 kes Implement Windows reparse points -- similar to directories, but
1012 we do not descend into it. This is a first cut. They seem to
1013 be backed up, but restore is not yet tested.
1014 kes Remove restore_blocking in tls code when shutting a socket to leave
1015 it in blocking mode. Hopefully this will fix the encryption bug
1016 reported by Frank Sweetser.
1017 kes When opening a file for backup, tell the OS that we are going to
1018 read it sequentially -- optimization.
1019 kes Change variable names in authenticate_director() to not conflict
1020 with member names in bat. Caused great confusion with compiler,
1023 kes Queue openssl error messages in case of comm problem.
1024 kes Do shutdown() call if socket terminated.
1025 kes Remove some duplicated code in tls.c
1026 kes Move more of the bsock member variables into private and access
1028 kes Add Frank Sweetser's tls-test to the regression suite.
1030 kes Add Swedish sv.po file
1032 kes Don't print clock skew message in FD if less than 3 seconds diff.
1033 kes Add a bit of VSS info to status client.
1034 kes Implement a first cut of Vista VSS, using Win2003 code.
1036 Release: 2.1.20 beta
1038 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1039 loaded tape but uses first drive).
1040 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1041 This was indeed a Win32 issue.
1043 kes Simplify search of autochanger for in-use Volume.
1044 kes Fix exit condition of check for in-use volume. kes Remove
1045 inappropriate my_postgresql_free_result() in db_close()
1047 kes Fix bad return in FD when encryption signature not found.
1048 Probably caused a crash.
1049 kes Inhibit missing encryption signature error messages for
1050 file types where no signature computed.
1051 kes Correct inverted check on autochanger in reservation system.
1052 kes Tweak debug code in autochanger reservation.
1054 kes Add some additional locking in the cats directory in subroutines
1055 that modify packet variables called from batch insert.
1056 kes Rework how dcrs are allocated. new_dcr() can now be called
1057 with an existing pointer, and it will simply clean it up.
1058 This allows the reservation system to test various different
1059 devices, and will permit easy device changes.
1060 kes A bunch of changes all over to handle new new_dcr() calling
1062 kes Work more on the Volume management in the SD. Remember Volumes
1063 for tape drives and for autochangers (even virtual disk changers).
1064 kes When looking at the Volume list to reserve a drive, handle
1065 autochanger names correctly by interating through the changer
1066 devices. Also call the Director to see if a Volume is suitable
1067 for the current job.
1068 kes Fix some bugs in bscan. Make sure all media records are written.
1069 Make sure that valid JobMedia records are written for disk files.
1070 Previously they were completely wrong.
1071 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1072 that the URLs don't change and so that the developers will all
1073 work off the same copy. Rebuild from scrach.
1074 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1076 Release: 2.1.18 beta
1078 kes Fix seg fault in FD from incorrect digest size.
1079 kes Fix argument to non-OpenSSL crypto.c subroutine.
1081 Release: 2.1.16 beta
1083 kes Remove a few malloc()s from the encryption code.
1084 kes Use the class calls to bsock in filed/backup.c and restore.c in
1085 place of the old bnet_xxx code.
1086 kes Implement code that does an on the fly calculation of the
1087 signing digest during restore of encrypted files. It makes
1088 a best guess at the algorithm, and if it is not correct, will
1089 then revert to the old code which reads the file after it is
1091 kes Implement at least one missing crypto stream in stream_to_ascii()
1092 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1093 #877 where a reload with bad syntax causes Dir to exit.
1095 Cut: 2.1.14 beta (not released)
1097 kes Do not free a volume on a tape drive until another volume is
1098 mounted and read, or the autochanger unloads the volume.
1099 This should help the SD re-use volumes that are already mounted,
1100 and should fix bug #886.
1101 kes Apply patch from user brettedgar that allows gnome2-console include
1102 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1103 kes Apply patch from Lucien Weller that fixes day of week calculation
1104 because of DST flag problem. Fixes bug #887.
1106 kes Move find_next_appendable_volume() to after acquiring a valid device
1107 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1109 kes Unable to reproduce bug 872. However added additional testing for
1111 kes Bug #874 resolved by documenting SQLite limitations.
1112 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1113 kes Bug #881 resolved by removing typo in mtx-changer script.
1114 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1115 approval. Added a link to the wiki on the web page, and implemented
1116 a backup from http://paramount.ind.wpi.edu
1118 kes Fix update allfrompool to pass pool name.
1120 kes Convert to pure GPL v2 license.
1121 kes Fix sscanf problems reported by Peter Buschman that caused
1122 a bus error on Solaris.
1123 kes Rework (simplify) the select prompt in bat.
1124 kes Move get_jobid_from_tid() into lib and create a
1126 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1127 should definitely fix the problem of lost error messages in the
1129 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1130 kes Eliminate tcpd.h from the project. Enclose the #include from the
1131 library with extern C ...
1132 kes Add print of signal name when a signal is trapped.
1134 Release: 2.1.12 beta
1136 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1138 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1139 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1140 makes SQLit3 run 30 times faster, though a bit less safe.
1141 kes Implement --with-batch-insert in configure and detection of thread
1142 safe libraries. It is on by default, but turned off if no thread
1143 safe library (e.g. SQLite 2) is available.
1145 kes Fix Bacula PostgreSQL buffer overruns.
1146 kes Do better checking for NULL results returned from PostgreSQL;
1147 implement retry for failed queries; clear results buffer after
1148 failed query. Hopefully this will correct the PostgreSQL failures.
1150 kes Implement algorithm to handle only one appendable volume with
1151 Prefer Mounted Volumes = no.
1152 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1153 returned from a query.
1154 kes Make volume lock recursive.
1155 kes Implement an additional volume reservation algorithm that
1156 starts by considering all reserved volumes then uses the
1157 old brute force algorithm of searching the resources to
1158 find a suitable device.
1159 kes Add new reservations debug code and refine the old code.
1160 kes Update the win32/dll/bacula.defs file.
1162 kes Tweak reservations algorithm to permit a few more cases, i.e.
1163 volume reserved, but on different drive, ...
1164 kes Enhance SD status to include Pool and Media Type for drive in a
1165 more readable format (a bit longer).
1166 kes Fix PostgreSQL double free.
1168 kes Minor refactoring of restore decryption code.
1169 kes Add code to smartall.c to detect double free of a buffer.
1171 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1172 so that bsmtp will create a correct email address (mailbox only).
1173 kes Modify 'memory' command so that the buffers are listed as 'In use'
1174 to avoid confusion with Orphaned buffers.
1175 kes I reworked the OpenSSL include/lib flags to be handled in
1176 the standard Bacula way, which should fix bug #863 concerning
1177 non-standard OpenSSL libraries.
1179 kes Implement Help Browser window for bat.
1180 kes Fix reload bug that reset StorageId to zero.
1182 kes Fix TLS #ifdefing when TLS turned off.
1183 kes Ensure that when labelling a tape with Slot=0 that InChanger
1185 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1187 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1188 add DISTINCT (required by PostgreSQL).
1189 kes Implement BSOCK authenticate_director() method. Eventually will
1190 authenicate all daemons.
1191 kes Move several more functions into the BSOCK class.
1193 kes Add code to tell the OS that we no longer need a cached
1194 file that we were reading. In findlib/bfile.c. Also,
1195 only cache files that we are reading. Thanks to
1196 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1197 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1198 kes Implement script to automatically generate cats and dll .def
1199 files for Win32 dll.
1200 kes Update README.mingw32 to include new .def file generation.
1201 kes Correct typo in UTF-8 error message as reported by:
1202 jhernandez <julianhernandez@gmail.com>
1203 kes Add additional sm_check() code on debug level 1.
1204 kes Set default debug level to 1.
1205 kes Trap SIGABRT in attempt to get traceback.
1207 kes Reduce bat connect timeout from 30 to 15 seconds.
1208 kes More restructuring and implementing BSOCK class in place of
1210 kes Remove a few unnecessary malloc() tests in crypto code.
1211 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1212 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1213 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1215 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1217 kes Fix Verify InitCatalog. The attributes were not pointing to the
1218 correct saved location.
1219 kes Implement message callback so that GUI is sure to get all
1220 daemon messages. Currently displayed in a dialog in bat.
1221 kes Ignore SIGUSR2 (Bacula timer) in bat.
1222 kes Apply regress patch from bug #859 to allow regress to work
1223 with Solaris compiler.
1225 kes Begin adding TLS support to bat.
1226 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1227 clean up lex.c and make it more readable.
1229 kes Move more bnet functions into the BSOCK class.
1230 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1231 kes Complete change of berrno strerror() method to bstrerror()
1233 Release: 2.1.10 beta
1235 kes Cleanup incorrect email addresses in bsmtp.
1236 kes Make bat display initial messages rather than discard them.
1238 kes First cut of adding .mod to the run command.
1239 kes Implement auto display of messages in bat.
1240 kes Enhanced preferences to allow all Bacula output to be
1243 kes Try to make bsmtp date routines more generic.
1244 kes Fixed bug #856 autochanger documentation.
1245 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1246 kes Add new cats entry point so Win32 builds.
1248 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1250 kes Do better checking for the MySQL 64 bit libraries looking for both
1251 .a and .so libraries.
1252 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1253 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1254 kes Require the thread safe version of MySQL during configure. Thanks
1255 to Andre Noll for pointing this out.
1256 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1257 continuing in migration code.
1258 kes Apply implementation of tray-monitor font derived from gnome-console
1259 submitted by Andreas Piesk <a.piesk@gmx.net>
1261 kes Eliminate important memory loss in SQLite
1262 kes Fixed the batch insert MySQL thread specific data that was not
1263 being freed. See cats/mysql.c:db_thread_cleanup().
1264 kes Fix restore before command.
1265 kes Convert old hdr.name to name() in a few places.
1266 kes Implement update jobid command.
1267 kes Return all time_t dates in db_get_job_record()
1268 kes Stop watchdog in SD earlier.
1269 kes Put Pool just after Storage in please mount message.
1270 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1273 kes Update the po files.
1274 kes Fix Verify InitCatalog by making it cache attributes.
1276 kes Change name bacula-bat to bat for man 1 page to correspond to
1278 kes Check for client and store NULL pointers in status command. This
1280 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1281 kes Fix sign extended editing of %p.
1282 kes Clean out a little old #ifdefing in cats/mysql.c
1284 kes If time diff between DIR and FD is more than 600 seconds convert
1285 INFO message to WARNING.
1286 kes Implement heap size display in status for all daemons.
1287 kes Attempt to fix MySQL db open memory loss (not successfull).
1288 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1289 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1290 Query. This looks like a MySQL but but by doing extra releases,
1291 the memory goes away. This should fix bug #847.
1293 kes When backup fails, cancel SD before waiting for sd termination.
1294 kes If SD is waiting for FD to connect during cancel, wake up the
1296 kes Fix fsf code so that errno is correctly reported.
1297 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1299 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1300 so that Bacula doesn't later stumble into a seg fault.
1301 kes Use the term Restore Client in the restore Job report.
1302 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1303 the original job's FileSetId.
1304 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1305 spooling in migration jobs. Not yet tested.
1306 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1307 reading conf file from a pipe. However, do it with open_bpipe()
1308 rather than popen. Not yet tested.
1310 kes Fix an ugly bug where the VolCatBytes were getting updated
1312 kes Implement bconsole memory command that prints current memory
1313 usage, plus smartalloc dump.
1314 kes Clarify some error messages in backup, admin, and migrate.
1315 kes Shrink label dialog to smaller size.
1316 kes Invert Cancel OK buttons on restore to be OK Cancel.
1317 kes More strerror() to bstrerror() conversions.
1319 kes Start implementing bstrerror() in place of strerror().
1320 kes Stripping path -- seems to work.
1322 kes Prevent door and port files from being restored (mostly
1324 kes Free an unreleased buffer in compat code.
1325 kes Change console Job name from *Console* to -Console- to eliminate
1326 Win32 filename problems. Put Win32 path separator when creating
1327 Console file. This fixes bug #846.
1328 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1330 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1332 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1333 to force Win32 error message.
1335 kes First cut strip path. The data should be passed to the FD,
1336 but nothing is done with it yet.
1337 kes Enhance the digest and signature routines in the crypto
1338 library to accept a JCR and to use it to print error messages
1339 so that they will go in the Job report rather than the daemon's
1341 kes Simplify some of the verify signature code.
1342 kes Simplify a few of the alternative returns in the signature
1345 ebl Use only POSIX regex instead of GNU regex in breg.c for
1346 File relocation. It fix broken freebsd compilation.
1347 kes Convert all other Dir files to use new ua class message
1349 kes Tentative fix for missing digest signature in bug 807.
1350 kes Correct handle problem in new win32_ftruncate routine.
1351 kes Convert ua_purge.c and ua_update.c to use new ua class
1352 message routines for bat.
1354 kes Correct incorrect installation of LICENSE in Win32 installer.
1355 kes Display LICENSE at the beginning of the Win32 install.
1356 kes Attempt to correct the need for the png files to be installed
1358 kes Reapply my bat.conf install script in qt-console. I think I
1359 editted bat.pro instead of bat.pro.in and it was lost.
1360 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1361 the /var/lock/subsys for subsysdir. Also corrects typos in the
1364 kes First cut update job.
1365 kes Correct configure to include qmake of src/qt-console directory.
1367 kes Make restore job yes/mod/no print in one command so GUI works.
1368 kes First cut implementing backup and restore client.
1369 kes Correct editing in Verify output that caused a seg fault.
1371 kes Insure that bat.conf is not overwritten during installation.
1372 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1373 while I was implementing migration in March 2006 !
1375 ebl Cleanup file relocation, using char *RegexWhere instead of
1376 char *where + bool where_use_regexp
1377 kes Update some manpages and add bat manpage.
1378 kes Make a first cut at converting bacula.spec.in for bwx-console
1380 kes Apply patch from John Goerzen to add hostname as fourth argument
1381 to make_catalog_backup script.
1382 kes Fix typos I introduced into bsmtp.c
1383 kes Make pm_strxxx() routines handle input of NULL pointer. This
1384 is to protect from NULL pointers returned from SQL databases.
1385 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1386 kes Add more debug to FIFO code -- fix fifo regression test.
1388 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1389 kes Add thread timer to bnet_connect() to break from OS if wait time
1392 kes Update Win32 build to include new files, new symbols, and
1394 kes Implement socket level heartbeat (tcp_keepidle)
1395 ebl Commit File relocation patch
1396 kes Make bat have 'make install' target.
1397 kes Warn during install if old gnome-console binary found.
1398 kes Warn during install if old wx-console binary found.
1399 kes Add -8 option to bsmtp command line to add content type utf-8.
1400 Fixes bug #809. (Character coding problem in bsmtp).
1401 kes If < is found in target (from, to, cc) then do not enclose the
1402 target in < > in bsmtp. Fixes bug #772 (malformed address).
1403 kes When printing certain items in dbcheck, stop after 300000.
1404 Fixes bug #822. (dbcheck loops).
1405 kes Incorrect status in Dir after waiting for mount with poll set.
1408 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1410 kes Print waiting to reserve a device every 5 mins.
1412 kes Don't call close_part in label.c if tape and relabel.
1413 kes Don't free volume if busy in close() -- should help with
1415 ebl Fix #824 RunScript bug (After script could be execute twice)
1416 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1417 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1418 Add a regression script to test RunScript
1420 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1423 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1424 deprecated. No additional bugs will be fixed, and they will be dropped
1425 in a future release (probably 2.4.0).
1426 kes Change name of wx-console to bwx-console to make it more Bacula
1428 kes Change the name of gnome-console to bgnome-console to make it
1431 kes Some time in March, a Feature Request with patch from Jorj Bauer
1432 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1434 The ability for the director to validate a Client (FD) CN against
1435 an arbitrary set of patterns rather than the hostname, with
1436 A new 'TLS Allowed CN' set of directives which are implemented
1437 in the Client resource. Then pattern matching is used in place
1438 of hostname matching against the Certificate's CN. As an example, we
1439 have certificates which (a) use a local CA, and (b) have a CN of the
1441 kes Add new/changed entry points to Win32 build
1442 kes Create unaccepted-projects for projects that are not accepted.
1443 kes Simplify locking in the reservations system.
1444 kes Add more debug code in reservations.
1445 kes Make sure error condition on reserving a volume is handled correctly.
1446 kes Correct handling of volume_in_use.
1447 kes Correct handling of initializing a device.
1448 kes Move handling of broadcasting releasing a device into release_device().
1449 kes Correct attaching dcr to dev so that it is only done if device
1450 is properly initiated.
1452 kes Locking debug level tweaks in SD.
1453 kes Tweak new Volume code.
1455 kes Add exec external-command [wait-seconds] to bconsole. This
1456 executes the external-command. Note! normally external-command
1457 should be enclosed in double quotes.
1458 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1459 it should normally be off in a production system.
1461 kes Implement die command for SD so that we can force it to dump.
1462 kes Implement SD lock debug code.
1463 kes Implement new algorithm for keeping Volume list in SD. It
1464 is now owned by the device.
1466 kes Implement new code for freeing in use volumes that should
1467 resolve if not all, some of the problems of multiple drive
1468 tape conflicts described in bug 801.
1470 kes Fix gui/bacula-web/images files in svn.
1471 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1473 ebl Fix a bug in batch mode (in string escape)
1474 kes Correct migration prune SQL typo that crept in in a
1475 recent 2.1.x change.
1477 kes Move bnet_despool() into class in bsock.c
1478 kes Modify job report to include director name and Build OS.
1479 kes Move drop root privilege and check_catalog() before fork.
1480 kes Add update database scripts (version 9 to 10) to updatedb directory.
1482 ebl Check size and age of each file after its backup to see if
1483 it has changed during backup, if 'checkfilechanges' is set.
1484 The FD will do an extra check (stat(2)) after
1485 each file backup. mtime, ctime and size are compared with
1486 'before backup' information. If time or size mismatch, an
1487 error message will be generated. You must upgrade FD to use it.
1489 kes Make database name and user configurable
1490 --with-db-name=xxx --with-db-user=xxx
1491 kes Add back database type to message.c for debugging.
1493 kes Implement dir_sql() which issues an SQL query.
1494 kes Modify bat medialist to use dir_sql() and do some minor C++
1495 formatting as well as eliminating a number of pointers, simplifing
1498 kes Fix some of the mtx-changer grep commands for tape label readers.
1499 kes Convert a number of bsendmsg into the appropriate send/warning/error
1500 message class calls.
1501 kes Suppress the using database message in the .sql command.
1502 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1504 kes Add context menu for floating a window.
1505 kes Some minor cleanup and name changes in qt-console
1506 kes Add doing mt setblk 0 in Win32 mtx-changer.
1507 kes Apply Martin's bug fix to move definition of ENODATA for
1509 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1510 sqlite2 and sqlite3.
1512 kes More pruning cleanup.
1513 kes Turn on wait_for_drive by default in mtx-changer.
1514 kes Turn on Batch insert code by default as it now passes regression.
1515 kes Add ./configure --enable-bat to enable building of Bat.
1516 No install yet though.
1518 kes Implement a new .sql command for bat.
1519 kes Implement code to turn off pruning in obtaining the next volume.
1520 Pruning is turned off for the status dir command, but turned on
1521 for SD requests and for the list nextvolume command.
1523 kes Correct Qmsg() that was not updated correctly when committing a
1524 previous change (probably the recent TLS patch).
1526 kes Write new subroutine is_volume_purged() that explicitly checks
1527 if the Volume is purged, and if so marks it as such. This should
1528 resolve problems reported about needing to mount twice to recycle
1530 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1531 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1532 amount of duplicated code.
1533 kes Do volume pruning only for the Media Type desired (reduces pruning time
1534 if multiple Media Types are in the same pool).
1535 kes Implement more detailed info in the Job report for the Bacula version
1537 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1539 ebl Add bbatch tool to bench database and insert mode.
1540 Fix sql quote stuff in batch mode
1541 Fix sql stuff for mysql
1543 kes Correct problems with am/pm scheduling. Fixes bug #808.
1544 kes Implement new prunning code that prunes up to 1000 jobs at
1545 the same time. The same technique can be applied to a number
1546 of other prune/purge subroutines.
1547 kes Add an insanity check when starting a new tape job to ensure
1548 that the tape position has not been changed. If so fail the
1550 kes Fix Win32 build for dlls to add the folllowing:
1551 src/lib/bsock.c -- new file with new entry points
1552 src/lib/dlist.c -- new entry points
1553 src/cats/sql_create.c -- new entry point
1554 src/cats/sql_cmds.c -- new DATA item exported
1556 ebl batch mode cleanup bscan-test is ok now.
1557 kes Implement SD code to check length of disk volume before appending.
1559 kes Correct return status on db_batch... routines.
1560 kes Add call to db_write_batch_file_records() to migration code.
1561 ebl Fix AfterJob timing
1562 kes Move the checking of the database in initializion of the Director
1563 to after we drop privileges. This avoids the need for both root
1564 and bacula access to the DB.
1565 kes Correct a misplaced variable definition in src/filed/backup.c
1566 kes Correct how the new batch insert db_create_attributes_record()
1567 uses the arguments. Caused a seg fault in bscan.
1568 kes Implement lock() and unlock() methods in DEVICE class.
1569 Implement block() and set_block(xx) methods in DEVICE class.
1570 kes Modify bnet_connect() so that it uses time() to check for the
1571 wait time expiring (on some OSes, some system calls may not
1572 return immediately).
1573 kes Modify Verify to obtain the previous JobId when it is actually
1574 running rather than at schedule time (as it was in 1.38.x).
1575 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1577 kes When checking pid in pid file, continue running if the pid is
1578 the same as ours. This occurs on IRIX after a system crash.
1581 kes Extend new GUI API.
1582 kes Make the ua structure a class, and implement send_msg(),
1583 error_msg(), warning_msg(), and info_msg().
1585 kes Apply fix from for building wx-console on the Mac from
1587 kes Implement new select mechanism for GUI programs.
1588 kes Reorganize initialization of stackedWidgets in bat.
1590 kes Add updated nagios plugin supplied by Christian Masopust.
1592 kes More bat implementation.
1593 kes File migrate bug with Pool Occupancy using mediaid instead
1594 of jobids. Fixes bug #795.
1595 kes Fix orphaned buffers in filed backup and verify due to
1596 crypto buffers not freed during errors. Fixes bug #789.
1597 kes Extend new GUI api code to tree commands.
1598 kes Ensure that tree and dot commands check console ACLs.
1599 kes Permit marking directory with trailing slash.
1600 kes Allow 20 console connections (instead of only 10).
1602 kes Add smartctl call to bacula-sd.conf as an example of getting
1605 kes Modify jobq.c to let simultaneous restore jobs run. This may
1606 cause them to fail if they cannot get a drive.
1607 kes Add Client Connect Wait to Storage daemon to permit users to
1608 modify the time the SD waits for a FD connection.
1610 kes Correct virtual changer check which was backwards. This caused
1611 volumes to be unloaded into slots already occupied.
1613 kes Apply Command ACL filter to JobId list in restore command.
1614 kes Correct typeo in var.c patch.
1616 kes Don't let Bacula prune File or Job records for the current Job.
1617 kes Fix variable substitution pad + inc bug reported (with patch)
1620 kes Correct SQLite log table index as reported by Luca Berra.
1622 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1624 kes Begin implementing new comm signals for API.
1625 kes Fix a few places in lib/message.c where the open fd may
1627 kes Continue implementing lib/bsock.c (real class). Make jcr,
1628 who, host, and port private. There are new methods to access
1629 them for non-class use. This required touching a number of files.
1631 kes Add LANG=C to autoconf/randpass so it works with languages other
1632 than English. Fixes bug #788.
1634 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1636 You will not be able to generate Include/Exclude list any more.
1637 It will be fixed soon.
1638 If you want to use this, you can apply
1639 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1641 kes Restore of sockets created false error messages because Bacula
1642 no longer restores sockets, but the code was still trying to
1643 set the attributes on a non-existent file. Reported by a user.
1644 ebl finish RecyclePool feature
1645 Media will takes Pool.RecyclePool
1646 when moving from Scratch to a Pool or when user will do
1647 update volume=xxx frompool
1648 To use it, add RecyclePool = aPool to your Pool resource
1651 RecyclePool = Scratch
1655 kes Expand new BSOCK class adding signal() and new BNET signals.
1656 kes Begin enhancing the dot commands adding a new API function
1657 that returns more information and will make it easier
1658 to interface to the Director from a program.
1660 kes Make DEVICE fd private. Its new name is m_fd, and can be
1661 obtained with dev->fd() outside the class. This is the
1662 first of many DEVICE members to be made private.
1663 kes Implement Michael Renner's idea on having a virtual disk
1664 changer. I made some minor modifications (e.g. I did not
1665 implement the Virtual Changer directive, but simply set
1666 the Changer Command to an empty string.
1668 kes Implement a BSOCK send() method that writes the whole record
1669 in a single write() request rather than in two.
1670 ebl add update volume=xxx recyclepool=yyyy
1671 volume takes recyclepool from pool when using update volume=xxx from pool
1673 kes Fix encryption deblocking bug, which caused some restored files
1674 to be truncated. This fixes bug #763.
1675 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1676 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1678 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1679 ebl Use btime_t instead of uint64_t in media patch.
1681 kes Optimize the use of the database a bit in the Status dir command.
1682 Only open it when needed, ensure that if any previous database
1683 was opened, it is closed.
1685 kes Correct VolCatBytes bug from media patch.
1686 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1687 in the case of orphaned records.
1688 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1689 and File records in 300K chunks to be more efficient. This
1690 idea came from Juan Luis Frances (if I remember right).
1691 kes Apply Eric's scratch patch that moves a purged Volume to
1692 the RecyclePool. Question: how is RecyclePool set? what
1693 happens to the ScratchPool?
1694 kes Apply Eric's media patch that collects read/write media
1695 times as well as byte counts. This patch requires a
1696 simultaneous upgrade of the DIR and SD. Note, there
1697 should be some way to turn off timing. I'm not sure
1698 times are in Bacula units.
1699 kes Apply Eric's batch-insert patch.
1701 kes Update projects list.
1703 kes Implement Include/Exclude file lists in FD as dlists using
1704 the new dlistString class. This permits efficiently having
1705 large include/exclude lists and completes project Item 25.
1706 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1707 console is authorized to cancel the job. This fixes bug
1709 kes Modify SD so that the VolCatJobs medium record is updated
1710 at the beginning of a Job rather than the end. This
1711 fixes bug #775 where exceeding MaxVolJobs caused jobs
1713 kes Added a mutex around getting and setting Volume information
1714 so that multiple simultaneous jobs will single thread.
1716 Switch to using Subversion
1717 kes Remove src/pygtk-console/ from configure
1719 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1720 plus the entrypoints.
1721 kes Apply patch supplied that corrects debug print
1722 in canceling jobs for max run time. Supplied as
1723 part of bug #621, which was previously fixed.
1725 kes Test on job_canceled() and sd_msg_thread_done inside
1726 loop starting the message thread to avoid a race condition.
1728 kes Remove rl_catch_signal from console.c as it conflicted
1729 with the header definition. Fixes bug #765.
1730 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1732 kes Clarify some stored/acquire messages to indicate if the
1733 problem is with read or append.
1735 kes Fix memory leak with storage ids in cats/sql_get.c
1736 kes Terminate watchdog earlier to avoid reference to released
1737 memory -- reported by Jason Austin.
1738 kes Move closing the database from jobq.c to the director daemon
1739 termination routine. This fixes memory leaks for shadow jobs
1740 (i.e. migration jobs).
1741 kes Free up the unique jobid chain items in migrate.c. This fixes
1742 a memory leak problem.
1743 kes Convert some ugly looking for statements to use foreach_alist
1744 in findlib/find.c. This will facilitate converting the structures
1745 to use dlist (for large include/exclude lists).
1746 kes Fix a bug in the btree.c and btree.h routines, then rename them
1747 rblist and add them to be built in src/lib. Include some new
1748 methods written by Rudolf Cejka that make the code more readable
1749 (hides some of the ugly casting).
1750 kes Add set_next() and set_prev() methods which make the code much more
1751 readable. Also add a new dlistString class that facilitates storing
1752 strings in dlists. To be used in the large include/exclude lists.
1753 kes Make some trivial modifications to lib/tree.h that use rblist
1754 rather than dlist for storing the tree links. This was suggested
1755 by Rudolf Cejka. The result of this is that the restore tree now
1756 uses red-black binary trees rather than simple linked lists. This
1757 should give rather dramatic speed improvements for directories
1758 contining large numbers of directories/files (more than 10000).
1760 kes Fix maxruntime bug #621.
1762 ebl Implement the include JobID in spool file name project.
1763 kes Reorder projects file in order determined by Jan 2007 vote.
1764 kes Implement item #12 on project list -- quick release of FD by
1766 kes Fix open of SQLite3 db where user does not have write permission
1767 so that DIR does not crash. Fixes bug #761.
1769 kes Add back missing @ in Win32 Makefile.
1770 kes Change 'Device not configured to autolabel' from INFO
1772 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1773 which should restart an indefinite # of times.
1774 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1775 other DIR specifications.
1777 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1778 Fix path quoting in SQLite scripts.
1779 Fix problems with SHGetFolderPath.
1781 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1783 kes Fix Job restart on error bug that promotes an Inc to a Full
1784 backup. This should fix bug #755.
1785 kes Add qt-console and first cut of code.
1789 kes Fix Bacula->Documentation link on Win32 to point to index.html
1790 instead of bacula.html. Fixed bug #750.
1791 kes Return JobId in db_get_job_record() when JobId==0. This should
1793 kes Do not release source pointers when restarting a failed job.
1795 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1796 This *should* fix bug #747.
1797 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1800 kes Modify USTORE constructor to set an empty store_source string,
1801 and don't copy the store_source string in a cancel. Hopefully
1802 this will fix Arno's seg fault, bug #744.
1803 kes Add back code to disable conio in configure. Fixes bug #743.
1804 kes Correct the Options scanner in the FD to correctly handle
1805 SHA1 option, which was eating the next option. Reported by
1807 kes Add code to indicate when the SD is spooling, spool wait, and
1808 despooling as requested by Alan Brown.
1810 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob