1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Implement unload_dev() before swap device.
29 ebl Add statistics prunning with option and menu
30 kes Separate unload_dev() from unload_other_device() in autochanger.c
32 kes Apply patch from bug #1069 that corrects spurious error messages
33 when ACLs enabled on SGI but no ACL exists.
34 ebl Fix small segfault in bacula-sd when debug level is 500
35 kes Modify run_program() and run_program_full_output() to use
36 call by reference for the results string. This corrects a long
37 standing problem where the address of the string may be changed
38 in the subroutine but not in the calling program.
40 kes Re-enable code to remember last volume mounted on a non-tape
42 kes Add patch supplied in bug #1068 that fixes a SD crash when using
43 a Virtual autochanger.
44 kes Generate correct JobMedia records during spooling/despooling when
45 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
46 <tih@hamartun.priv.no> for excellent analysis and testing.
48 kes Tweak hash algorithm for htable using Martin Simmons idea
49 for doing a circular shift.
50 kes Remember what volume is in VTLs (previously turned off for
52 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
53 pointed out some problems in creating JobMedia records during
54 spooling with concurrent jobs. Fix the problem by updating the
55 start file position before despooling and generate a jobmedia
56 record at the end of despooling.
58 kes Fix handling of JobMedia records during spooling and when a
59 Volume is changed without actually writing data to the Volume.
61 kes Rework certain SD locking based on gdb tracebacks of deadlocks
62 sent by Eric. This code now uses only the volume_lock() rather
63 than the reservations lock when at EOM and acquiring a new
65 kes Ensure only one exit point in several subroutines.
67 kes Implement bsock code to permit locking. Use the new code in Verify
68 in the FD to prevent the heartbeat thread from disrupting the Verify
70 kes Modify SD locking to eliminate locking the reservations system from
71 outside the system. Use the volume lock when getting media data
72 and reserving a new volume at end of media.
73 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
74 when SD starts are not locked into place.
76 kes Fix error compiling runscript code on 64 bit machines.
77 kes Tweak Win32 mount point code.
78 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
79 cleared giving bad file estimate).
80 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
83 kes Keep Schedule run lists in order as suggested by
86 kes Implement autostart scripts for Debian.
87 ebl Implement upgrade catalog scripts.
89 ebl Apply jobstat patch for long term statistics. Have to implement
90 purge stats command and upgrade scripts.
91 kes Fix mtx-changer.in for broken Debian mt program.
93 kes Fix large number of JobMedia records reported by Eric Bollengier.
95 kes Apply doc fix from bug #1062.
96 kes Resolve crash and improper restore wx-console Win32 restore
98 kes Update Win32 wxWidgets to latest version.
99 kes Attempt to do correct handling of Win32 mount points. Should
101 kes Fix Win32 FD backup/restore memory leak due to improper termination
102 of BackupRead/Write. This fixes bug# 1038.
104 ebl Reduce memory usage for accurate backup, working only with ctime
105 and mtime. (not all Lstat field)
106 About 40MB for my linux system (400.000 files)
108 kes Add dcr->reserved_volume flag that allows us to release a volume
109 even if it is not vol->released. This allows maxvol2 to work when
110 Volumes expire and we are already writing to the device (i.e. a
111 volume is pulled out from under us by another job terminating after
112 we reserve the drive).
114 ebl Permit multiple command/console per runscript definition.
115 RunScript { command = /bin/true ; command = /bin/false ... }
116 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
117 (restart an application) just after the VSS snapshot on windows.
118 kes Don't zap dcr values during release_volume() as they might
119 have the next Volume to be mounted.
120 kes Fix AIX prototype.
122 kes Second cut of drive switching during backup.
125 kes Update Win32 version of wxWidgets to most recent version.
126 kes Tweak Copy job details.
127 kes Rework dir_find_next_appendable_volume to make a bit more effort
128 to find a suitable volume before giving up.
130 kes Make ask_sysop_to_create... to return if waken from wait.
131 This helps get out of blocked conditions.
132 kes Experimental implementation of switch_device in reservations.
133 kes Implement FD version to allow easier protocol changes.
134 kes Add Plugin Options string -- not yet passed to FD.
135 kes Implement PluginOptions ACL.
137 kes Attempt to correct problems with restores with autochangers and
138 use counts going negative
139 kes Rework SD status command and implement API for bat. Implements
140 header, runing waitreservation, devices, volumes, spooling,
141 and terminated status keywords.
142 .status storage=xxx <keyword>
143 kes Clarify TLS error message by adding double quotes around name.
144 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
145 kes Pass jcr to tls routines so debug messages can be handled better.
146 kes Rework jobq resource allocation code, and possibly fix a bug
147 that caused reference counts to get out of sync.
149 kes Rename fd/dir plugin to use Bacula standard underscore.
150 kes Plugin work -- bring dir up to fd level.
151 kes Start implementation of VTL code
152 kes Fix Win32 build after adding new cats subroutine.
154 kes First cut at Duplicate Job implementation.
156 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
157 kes Start PluginOptions string, and refactor a bit of ua_run.c
158 ebl Apply Allan patch that permit to reset recyclepool.
160 kes Test patch -- possible fix or improvement for bug #1053
161 kes Refactor FD and SD status commands to permit new API code in
162 SD, and to fix Win32 build.
163 kes Win32 build is now working.
165 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
166 some ideas in patch from Scott Bailey.
167 kes Begin implementation of duplicate Job control.
168 kes Fix some of Win32 build after recent additions.
169 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
170 which causes the FD to detect whether or not the OS has the
171 honor no dump bit (*BSD systems), and if so, to skip backing up
172 any file with this bit set. The feature is enabled by setting
173 'honor no dump flag = yes' in the Options section of a FileSet.
175 kes Correct po warning message with datarootdir
176 kes Implement more code in dird.c to put configuration parsing in
177 a class rather than use globals.
178 kes Restructure SD status command for implementation of bat API
181 kes Suppress incorrect 'Will not descend from x into y' messages.
182 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
183 daemon globals used by parser.
184 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
186 kes Fix free of plugin_list when none exists.
188 ebl Apply accurate project patch.
190 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
191 on non-mempool object)
192 kes First cut of converting FD .status to work with bat API.
194 .status client=XXX header
195 .status client=XXX running
196 .status client=XXX terminated
197 kes Implement first cut of Copy Job.
198 kes Implement Catalog in Pool resource. It overrides catalog specified
199 in the Client resource.
201 kes Apply patch (with some difficulties) from Joao Henrique Freitas
202 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
204 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
205 ftruncate() actually works. In the case of some (cheap) NAS devices,
206 it does not, and so recycling NAS Volumes does not work. The code
207 simply unlink()s the file, then recreates it. This fixes bug #1011.
209 kes First incomplete cut of big malloc blocks for htable.
210 kes Tweak plugin code.
212 kes Plugin debug code + tweak a couple bat dialog layouts
214 kes Fix creating first JobMedia record during Migration to include
215 proper index. This caused slow restores of migrated jobs.
216 kes Temp fix to plugin name file_index.
217 kes Bacula backed up and restored a MySQL database.
219 kes Implement plugin restore.
220 kes Implement parsing of db_driver to give db_type index.
222 kes First cut of plugin restore code.
223 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
224 and do not strip paths on symbolic links.
225 kes Set catalog backup database and user name from values specified on
226 the ./configure line.
227 ebl Fix #1031 about wrong pool source information in job report.
230 kes Remove a redundant jcr argument to find_files, match_files, and
232 kes Implement '.status dir header|scheduled|running|terminated' that
233 prints the requested status section. With the exception of the
234 header, the other reports have fields separated by tabs (\t).
236 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
237 a resource embedded run command to find a since time if no explicit
238 since time was supplied on the command line.
239 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
240 that updates the state file at job termination time in addition to
241 when the daemon terminates.
243 kes First version where a plugin did a backup.
244 bpipe-fd.so created a backup file, wrote a test
245 string to it, and Bacua could restore this fabricated file.
247 kes Implement DB Driver = string for the DBI driver.
248 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
249 kes First cut of code for loading Win32 plugin dlls. Implement
250 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
251 and implement a dlfcn.h file based on opengroup's definitions of
254 kes First cut plugin directives.
256 kes Apply patch from bug #1049 to prevent stripping the path on a
258 kes Attempt to fix bug #1047 where stripping a path corrupts the
259 heap. Waiting for feedback.
260 kes Correct the Mount message not to suggest labeling a new tape
261 when doing a restore. Submitted by email by John Stoffel.
262 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
263 FD by using casting. Reported in bug #1042.
265 kes A bit of crypto cleanup. More later.
267 Release Version 2.2.8
269 kes Apply patch from Martin to correct bug #1040, bscan sets existing
271 kes Fixed important spelling error in doc -- bug #1045.
273 ebl Fix bextract to be able to extract non-portable Win32 data to
275 kes Move initialization of read/write res lock earlier in the code.
276 This fixes the crash with a null conf file. This fixes bug
278 kes Redefine CURES in lib/parse_conf to be URES and move it all
279 into lib/parse_conf.c -- this responds to bug #1042, but does
280 not fix it. The fix is not to compile with FORTIFY_SOURCE.
281 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
282 the trunk SVN. I don't think this was reported as a bug.
284 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
286 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
288 kes Add DataDespooling and DataCommitting status (committing is
289 the last despooling).
290 kes Finish implementation of new reservations code noted below.
292 kes Fix bsnprintf for float point numbers. I broke recently when
293 parameterizing some variables. This fixes bug #1036.
294 kes Undo recent reservations changes ... will apply them later
295 when they work better.
297 ebl Fixes #1034 which cause mysql to hang the connection after 8h
298 ebl Change default statistics target of filename.name and path.path
299 fields for PostgreSQL. This speeds lookup by indexes. Thanks
301 kes A few more tweaks to new reservation code. Make sure to clear
302 vol released flag when retaking volume. When reading label and
303 label is bad mark volume unused. When recycling, mark volume
304 unused so it can be renamed.
306 kes Fix reserve_volume() so it doesn't release a volume in use
307 (i.e. a volume entry not marked released). This should be
308 the last part needed to fix bug #1018.
310 kes Move Heartbeat documentation from Job to Director resource.
311 This fixes bug #1033.
313 kes Fix existing switch drive SD code to call autochanger to release
314 any old volume. This must be done to keep the autochanger from
315 releasing subsequently newly reserved volumes in doing a close().
316 This should fix bug #1018.
317 kes Fail if attempting to get console input in batch mode. This
318 should help fail RunScript console commands that are incomplete.
319 kes First cut implementing switch_drive() in SD (not actually called).
321 kes Implement first cut running console commands in a RunScript.
323 ebl Fixes bug #1028 where 'Selection Type' option was not usable
325 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
328 Release Version 2.2.7
330 kes Add new free_tls() entry point so that Win32 builds.
331 kes Fix compile warning in src/lib/util.c
332 kes Fix entry point for edit_job_codes() so that Win32 builds.
333 kes Fix seg fault Frank Sweetser reports in regression testing
334 on his systems. The problem was that the original author of
335 bsnprintf.c did not take into account the side effects of
336 using ++x in the argument to a #define.
337 kes Make SD protocol backward compatible with version 2.2.x.
339 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
340 because Bacula no longer restores sockets.
341 ebl Always use ignorecase fileset option on win32 FD.
343 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
344 that implements double quoting include names in conf files,
345 and also allows piping input by having the first character
346 be a vertical bar (|).
347 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
348 that implement %f in RunScripts to pass the FileSet name.
349 kes Skip leading | when lex input comes from a pipe as suggested
350 by Michael Stapelberg <michael@stapelberg.de>.
352 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
353 Nerijus Baliunas <nerijus@users.sourceforge.net>
355 kes Implement Plugin Directory and plugin events.
357 kes Implement a security enhancement: TLS authentication but no
358 encryption. Enabled by setting 'TLS Authentication = yes'.
359 Note when this is on, TLS encryption is turned OFF!
361 kes This patch corrects a problem where the maximum concurrent storage
362 jobs counter gets out of sync during restore jobs causing jobs to
363 'wait on max Storage jobs'. This patch fixes bug #1009.
365 kes This patch fixes bcopy so that it produces correct Volumes.
367 kes This patch eliminates spurious output to the console during a VerifyVolume
368 job that contains encrypted data. It fixes bug #1024.
370 kes This patch prevents the 'status dir' command from trying to use a scratch
371 volume and possibly moving it from one pool to another. This patch fixes
374 kes Add new include to postgresql.c suggested by Marc Cousins so
375 that it compiles correctly with pgre version 8.3.
377 kes Fix --archivedir addition to configure. Replace it with
378 --with-archivedir in configure.in This fixes the regression
380 kes This patch fixes bug #1012 where the job is canceled because
381 of Max Run Time exceeded when the job has not yet started.
383 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
384 one 'part' to write. Instead of each part being stored on disk,
385 written to DVD, then deleted from disk, all parts are written to disk,
386 and only the last is written and deleted from disk.
387 kes This patch fixes the status command to include the formating string for
388 JS_AttrInsterting. It fixes bug #1021.
389 kes This patch should fix the Mac OS X build problem on the latest
390 Darwin, where sys/types.h was not included correctly (apparently
391 due to a change in the Mac headers). The solution was to explicitly
392 ensure that it is defined for the ./configure.
393 This patch also has a rebuild of configure that includes the Debian
394 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
395 kes This patch should ensure that queued messages to the console are
396 displayed as soon as possible. It should fix bug 1007, but has been
397 reported not to work.
399 kes This patch fixes the infinite loop when trying to increase the
400 maximum number of volumes in a Pool during the add command.
401 This patch fixes bug #1008.
403 Release Version 2.2.6
405 db Remove extra data on estimate command in joblist for bat.
407 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
408 really change anything, but is the beginning of doing it *right*.
409 To do it completely right the LastWritten date must be passed to
410 the SD, but it is not yet done.
411 kes Minor tweaks to some bat restore SQL.
412 kes This patch fixes bug #1003 where putting the message output from
413 a Verify job into the catalog results in a recursive loop. The problem
414 seems to show up only with postgresql (to be verified).
415 kes Correct %x to %p in postgresql debug statement.
417 kes Fix bug #942 where lots of emails where generated when the heartbeat
418 interval was low and Bacula wanted a different tape from the one in
421 ebl Add new SD despooling attributes and Dir inserting attributes
422 job status codes in the catalog (Status table).
424 ebl Use qmake-qt4 instead of qmake when available (debian system).
426 kes Add a security warning to src/cats/make_catalog_backup.in indicating
427 that passing the password via the command line (arg 3) is insecure.
428 This responds to bug #990 (it doesn't fix it).
430 kes Set default debug_level to zero. This corrects bugs #991 and #993.
431 kes Fix a crash in bat when it cannot connect to the Director for example
432 if the Director is not running.
433 kes Remove redundant INDEX (JobId) from File table in the trunk.
435 kes Make explicit exception to GPL in LICENSE to permit linking
436 the Win32 FD with Microsoft VSS code.
437 kes Apply the Solaris package patch from
438 Masopust, Christian <christian.masopust@siemens.com>
439 kes Apply the patch to optionally add a timestamp in the debug output
440 submitted by Mariusz Czulada <manieq@wp.eu>.
442 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
443 backend (sql_strerror). Fixes bug #989
445 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
446 It applied with no problems.
447 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
449 kes Redirect stderror to stdin on mt status command in mtx-changer.in
450 since the status is returned on stderr on Solaris.
451 kes Activate Close button on tray-monitor window. This fixes
453 kes Check for NULL item in parse_conf.c before calling it. In the
454 case of Device, there is no item and this caused a seg fault when
455 Device appears in the conf file.
456 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
457 avoids pulling in config.h multiple times in some new code.
459 kes Fix spurious warning message printed when creating a volume with
460 a LabelFormat. This fixes bug #976.
462 Release Version 2.2.5
464 kes Add JobId in place of Job name in all the Jmsg() output.
465 kes Correct the APP_DESC for the Win32 storage service (remove an e).
467 kes Make maxvol-test and new more strict maxvol2-test work.
468 kes Print JobId in all Jmsg() job output.
470 kes Add new SD despooling attributes and Dir inserting attributes
471 job status codes. This fixes bug 961.
472 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
474 kes Fix doc issue. This fixes bug #963.
475 kes Fix listing performance problems in bat. Pointed out by
477 kes Remove old debug code.
478 kes Fix bat code that tests for Win32. This should fix bug #968
479 kes Query 5 list wrong Vol after migration. This fixes bug #960
481 ebl Fix #969 where user can't change Replace option in restore menu.
483 kes Save jcr in thread specific data (tsd) for each thread.
484 kes Make Dmsg() print JobId as -%u.
485 kes Make Jmsg, Emsg, and others automatically pickup the jobid
486 for the thread if it exists.
487 kes Remove old reservation debug jid code.
488 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
489 ebl Add an option that permit to specify spool size in job
490 definition. (Applying patches/testing/spoolsize_per_job.patch).
491 You must upgrade SD and DIR at the same time.
492 dvl Add new configuration item --archivedir
493 dvl Adjust regression tests to use tmp not /tmp. This will allow
494 multiple concurrent runs of the regression tests.
496 kes Fix race condition that drops final block written to volume.
497 This happens in rare cases with multiple simultaneous jobs
498 when the Volume fills. This fixes bug #964. May be related
499 to bug #935 and possibly #903.
500 kes Eliminate more strerror() and replace with bstrerror().
501 kes Remove BSD getopt and replace with unrestricted IBM version.
502 kes Fix Win32 build for changed calling sequences.
503 kes More tweaks to the mount volume routines to get everything
504 right. Changed variable name from find to have_vol, which is
505 much easier to understand.
506 kes Enhance btimer debug code.
508 kes Fix FD->SD authorization failure, which was due to spurious
509 wakeups from a pthread_cond_timedwait(). Simply check the
510 predicate before continuing. This fixes bug #953.
511 kes Add const char where needed (more to do). Remove temp debug code.
513 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
514 kes Don't overwrite error message in check_tables_version.
516 kes Unlock batch insert tables with same calls used elsewhere.
517 kes Allow starting 59 jobs a second.
518 kes Make SD session key more random.
519 kes Add retry for SQLite opening db if it fails. Probably helps
521 kes Suppress extra error messages during batch insert failure.
523 kes Add jcr to timer packets so if killed message can be sent to job.
524 kes Add JobId to all Dmsg() output.
525 kes Put some FD auth code on dbglvl rather than fixed.
526 kes Return insert attributes error message in db msg buffer to avoid
527 false error messages. Helps fix bug #966.
528 kes Separate batch init error messages. Probably helps fix bug #966.
529 kes Make SD code that contructs attribute insert check string lengths
531 kes If Dir gets an error during inserting attributes, cancel SD.
532 This reduces unnecessary error messages.
534 kes Correct search boolean for getting Volume info
535 ebl Cleanup batch insert code. Probably fixes bug #965.
536 kes Back out one small change to the reservation system (reserving a volume).
537 kes Rework how a Volume is mounted. It is now much more intelligent and
538 will always attempt to use any mounted volume if possible and reduces
539 calls to the Director asking about volumes.
541 kes Turn off some code when batch insert not enabled.
542 kes Edit FD name in connect error messages.
543 kes Rework the reservation system to take into account that the Director
544 might give us a Volume that is different from the current one being
545 used, and to ensure that we don't exceed Maximum Volume Jobs.
546 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
547 fatal error with multiple jobs running'
548 kes Add more debug code in reservation system.
549 kes Implement maxvol-test to check bug #947.
551 kes Add code to handle tray monitor separated from Win32 FD.
552 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
554 kes Add missed return in fixing verify bug -- trunk only.
555 ebl Fix a command parser issue causing a director segfault.
556 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
558 kes Increase the max block size to 4MB fixes bug #957.
559 kes ERABT if user sets min block size > max block size. Fixes bug #956.
560 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
561 is not properly mounted (recognized) during a poll.
562 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
563 Job that has differences reports Verify OK.
564 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
566 ebl Add an option to operate on all pools with update vol parameters.
567 This complete the project 20. Patch from Nigel Stepp.
568 ebl Add history support to bconsole when using readline.
569 Using Ctrl-D to exit doesn't update .bconsole_history
570 kes Modify new volume algorithm to use max MediaId for generating next
571 volume number rather than the count of Volumes. This should essentially
572 eliminate the failure rate if some volumes were deleted. Bug #921.
573 kes Begin implemention of Optimize Job Scheduling.
574 kes Implement restore callback that Dirk and I agreed on for bat
575 restore. This fixes bug #928. Restore of backup of zero files fails.
576 kes Fix SQL Catalog logging which broke with new db_escape_string
579 Release Version 2.2.4
581 kes Fix bacula_cats.def for new db_escape_string().
582 kes Increase size of name string when FD making connection to SD.
583 May fix bug #953. FD->SD connection failure.
585 kes Add code to help Dan debug 2drive-incremental-2disk test.
586 kes Add code to try to fix bug #908.
587 kes Add waits to multiple exit detection code to try to force pid
588 file to always be deleted.
589 kes Restore good dev.tar.gz to rescue set appropriate binary property.
591 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
592 trying to switch drives by checking for blocking before unblocking.
594 kes Cancel storage daemon in all cases where FD reports error. This
595 should fix virtually all cases of bug #920.
596 kes Fix db_escape_string() for MySQL which did not compile.
598 kes Fix error message that was clobbered when Dir tells SD it does not
599 have write permission on Volume. This should fix a minor point
600 in bug #942, but not the main problem.
601 kes Add code to cancel job in SD if FD connection fails. This should
603 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
604 dvl Pass jcr and db into db_escape_string() to enable better escaping
606 kes Fix migration code to get correct Volume name with multiple volumes
607 by skipping |. Fixes bug #936.
608 kes Implement patch supplied by Landon to fix bug #944 where using
609 TLS with bconsole uses 99+% of the CPU.
610 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
612 kes Move patches into patches directory.
614 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
617 ebl Using 'm' in bconsole will show messages like before,
618 and not memory usage.
619 kes Fix bug #935, and probably also bug #903 where files were not
620 restored. MediaId was not properly set in JobMedia record after
623 kes Suppress chown and chmod error messages if the FD is not running
626 kes Apply Martin Simmons' patch that should turn off the new API usage
627 when batch insert is turned off allowing building on older
629 kes Add ./configure search in qwt-qt4 for qwt package
631 kes Bacula is now free of 3rd party GPL copyrighted code!
633 kes Add guid_to_name.c/h which replace idcache.
634 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
636 ebl Detect if new PosgreSQL batch insert API is present.
637 kes Correct incorrect mempool call causing Director crash. Occurs on
638 systems without va_copy().
639 sb Update spec files for 2.2.1 release
641 kes Fix memory pool call in ua_output.c. bug #934.
642 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
643 Add test program to fnmatch.c
645 kes Integrate patch to README.vc8 from
646 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
647 edit it to get it into Unix patch format.
648 kes Implement mkpath.c to replace old FSF makepath.c
650 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
652 Release Version 2.2.1
654 kes Update POTFILES.in
655 kes Cleanup a few underquoted AC_DEFUNs in configure
656 kes Apply patch from Martin Simmons that adds a test for va_copy to
659 kes Fix bug #921 by increasing the number of tries to create a new volume
661 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
662 can be called multiple times. Implement a version for machines
663 without va_copy() that gets a big buffer.
665 kes Integrate more portable zone offset code into bsmtp.c
666 Submitted by Attila Fülöp.
668 kes Fix bad SD->FD return status reported by
669 (James Harper) <james.harper@bendigoit.com.au>
670 ebl Fix a bug in read_close_session which return random status
671 thanks to James Harper
673 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
674 and directory names during restore of single file/directories.
675 kes Add sanity checks to .sql command when string is empty. Hopefully
676 that will resolve Dirks Director crash.
678 kes Apply patch submitted by Martin Simmons that corrects a seg fault
679 in the bsmtp chat subroutine when debug is >= 10.
681 kes Fix Director crash when running bat SQL queries.
682 kes Add David's notes on Item 8: Copy pools.
684 kes Rework projects file to be current and ready for a vote.
685 kes Enhance lex scanner error message.
687 kes Tweak LICENSE file to mention BSD code.
688 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
689 if specified on the ./configure.
690 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
691 This class is intended to allow us to open a second bsock to the
692 Director while in the restore subdialog.
694 kes Fix configure to create bat Makefile before creating dependencies.
695 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
696 kes Add a tooltip to the tray monitor.
697 dvl Set the Director's PID file before dropping privs. This fixes
700 kes Update AUTHORs file
701 kes Increase the default max concurrent jobs to 20 in FD and SD to
702 correspond with the default .conf files.
703 kes Rewrite the Win32 service routines. This eliminates the 3 copies
704 some different, of the same file created by RN when porting the
706 kes Rearrange some of the Win32 directories and the placement of the files
708 kes Set DEVELOPER flag in version.h
710 ========================================================================
711 Release Version 2.2.0
713 kes Apply a second doc patch from Marc.
714 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
715 improves the tips section that discusses how to setup multiple
718 kes Update bat README file.
719 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
720 corrects a typo in the Recycle status check in db_find_next_volume().
721 This will probably fix a number of annoying problems with multiple
723 kes Modify most of dird/msgchan.c to use bsock class calls rather than
724 bnet calls -- no functionality change.
726 kes Modify the Verify output to specify if files are missing on
727 the Volume(s) or disk. Fixes confusion in bug #916.
728 kes When more than one Volume is read in a migration job, the last
729 Volume bytes reported are from the last read volume rather than
730 the last written volume. Fixed. This fixes bug #910.
731 kes Fix display of Recycle flag after update volume=foo recycle=yes.
732 It previously printed New Recyle flag is: no. This fixes bug
735 kes Correct seg fault when switching tape drives during restore.
736 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
737 be used until after 2.2.0 release.
739 kes Remove fnmatch() in SD that permitted wild card specifications.
742 kes Fix %g in filename returned by SQL for browse tree reported by
744 kes Fix configure so that it puts config.out in the cwd rather than
746 kes Attempt to fix the locking problem reported by Eric in bug #906.
747 kes Make berrno class to leave errno unchanged after constructor call.
748 kes Make bnet_server use the heap rather than the stack to allocate
749 its socket fd pointers to avoid a crash at termination. Problem
750 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
752 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
753 and putting it in depkgs-qt along with Qt4.3.
755 kes Rework code in acquire.c that switches drives for reading when
756 the Media Type does not match. This should fix bug #906
758 ebl Fix a director segfault during job setup #907
759 kes Correct seg fault in postgresql when first operation returns no
760 rows. Fixes Dirks File browser problem seg fault with bat.
762 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
763 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
766 kes Implement PopUp YES/NO dialog for bat.
768 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
770 kes Correct RunScript to terminate job in FD on failure.
771 kes Change abort_on_error and AbortJobOnError to fail_on_error
772 and FailJobOnError in RunScripts.
773 kes Minor tweaks of code formating in RunScripts, principally to
774 avoid depassing 80 columns.
776 kes Eliminate one #ifdef Win32 in bsmtp
777 kes Implement grow tool to grow a file for testing very large databases.
778 kes Add big-vol-test to test Bacula seeking with > 5GB.
781 kes Modify find_next_volume() to return all values in Media record.
782 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
786 kes Update Release notes
788 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
789 Warning, in previous beta version, all media get from scratch keep their
792 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
793 This should fix bug #842. Made a note to look at removing the temp
794 files at the end of the install.
795 kes Add ability to mount and unmount a file device providing it is
796 marked as being removable and has the appropriate mount and unmount
797 commands defined in the Device resource. This fixes bug #830.
798 kes When applying a storage override, release all previous storage
799 definitions rather than just prepending the new storage.
800 This should prevent a good deal of confusion.
802 kes Implement ./configure search for qwt libraries.
804 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
805 Win32 FD. This should fix bug #893.
806 kes Remove an unnecessary beep in Win32 init code.
807 kes Update copyright dates in Win32 executable about boxes.
808 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
809 code with a BSD getopt.c and getopt.h.
810 kes Remove sched.h from the Win32 compat directory -- not used.
811 kes Remove the Exit menu item from the Win32 tray monitor. If you really
812 need to shut it down, do it through the services panel or the command
814 kes Remove some inappropriate Bacula FSFE copyrights.
815 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
816 kes Fix regress config non-portable test as pointed out by
817 Florian Heigl <florian.heigl@gmail.com>
818 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
819 as pointed out by Florian Heigl <florian.heigl@gmail.com>
821 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
822 Reported by Frank Sweetser.
826 kes Fix client-only build.
827 kes Integrate client-only fixes for bsys (initgroups) and conio from
828 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
829 kes Make arguments to get_scratch_volume() in same order as other
831 kes Rework the prune_volumes() subroutine so that after purging and
832 no volume found in desired pool, it will check for a scratch
833 volume. This prevents recycling the whole scratch pool.
834 kes Add code to status storage to print boffset_t (largefile support).
836 kes Move qwt (Graphics libarary for Qt4) to depkgs.
837 kes You now need a --with-qwt=<dir> to be able to build bat.
838 kes Update src/win32/cats/bacula_cats.def to include the new
839 db_get_query_dbids() call on Win32.
841 kes Correct a problem when selecting a scratch volume and moving
842 it to another pool that lost some columns.
843 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
844 kes Enhance Autochanger error messages to include Volume and device name.
845 kes Rework prune_volumes() code to take account of InChanger flag,
846 and to handle recycling volumes going to the Scratch pool and
847 current pool because the RecyclePool directive.
848 kes Implement a better and more efficient db_get_query_dbids() to
849 handle creating and passing back a list of DBIds.
853 kes Start work on new more efficient DBId subroutine. First use
854 will be for recycling volume to Scratch inchanger.
855 kes Increase number of JobIds in pruning from 1000 to 10000.
856 This to be replaced by above routine.
857 kes Begin implementation of building Qt4 on Win32.
858 kes Correct typo in fix I added for bad TLS shutdown.
859 kes Pull 2.0.3 patches into patches directory.
860 kes Update Release notes. Include qt-console in line count.
861 kes Update Projects file.
863 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
864 bug in migration code where a job that spanned two volumes
867 kes Implement new BST_DESPOOLING blocked state. Change from locking
868 during despooling in SD to blocking. This means that other threads
869 can work with the device structure, in particular the reservations
870 system while despooling.
872 kes Fix return in reservation message queue that missed clearing
873 the jcr lock (implemented 26Jun07 below).
874 kes Rename a number of dev methods to make locking function names
876 kes Document locking in lock.c. Move lock structures to new file
879 kes Move reservations message lock to lock jcr only this
881 kes Move main SD locking code into lock.c (new file).
882 kes Update Win32 build to include lock.c
886 kes Dirk committed the qwt library code for drawing graphs in bat.
887 kes Tweak install of qwt so that it is integrated with ./configure.
889 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
890 out by Eric (my typo).
891 ebl Fix configure.in to get batch mode enable
892 kes Return correct string from authenticate.cpp in bat when connecting
894 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
895 spurious line drops when using TLS.
896 kes Do not file reparse points when restoring a file that already
899 kes Implement Windows reparse points -- similar to directories, but
900 we do not descend into it. This is a first cut. They seem to
901 be backed up, but restore is not yet tested.
902 kes Remove restore_blocking in tls code when shutting a socket to leave
903 it in blocking mode. Hopefully this will fix the encryption bug
904 reported by Frank Sweetser.
905 kes When opening a file for backup, tell the OS that we are going to
906 read it sequentially -- optimization.
907 kes Change variable names in authenticate_director() to not conflict
908 with member names in bat. Caused great confusion with compiler,
911 kes Queue openssl error messages in case of comm problem.
912 kes Do shutdown() call if socket terminated.
913 kes Remove some duplicated code in tls.c
914 kes Move more of the bsock member variables into private and access
916 kes Add Frank Sweetser's tls-test to the regression suite.
918 kes Add Swedish sv.po file
920 kes Don't print clock skew message in FD if less than 3 seconds diff.
921 kes Add a bit of VSS info to status client.
922 kes Implement a first cut of Vista VSS, using Win2003 code.
926 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
927 loaded tape but uses first drive).
928 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
929 This was indeed a Win32 issue.
931 kes Simplify search of autochanger for in-use Volume.
932 kes Fix exit condition of check for in-use volume. kes Remove
933 inappropriate my_postgresql_free_result() in db_close()
935 kes Fix bad return in FD when encryption signature not found.
936 Probably caused a crash.
937 kes Inhibit missing encryption signature error messages for
938 file types where no signature computed.
939 kes Correct inverted check on autochanger in reservation system.
940 kes Tweak debug code in autochanger reservation.
942 kes Add some additional locking in the cats directory in subroutines
943 that modify packet variables called from batch insert.
944 kes Rework how dcrs are allocated. new_dcr() can now be called
945 with an existing pointer, and it will simply clean it up.
946 This allows the reservation system to test various different
947 devices, and will permit easy device changes.
948 kes A bunch of changes all over to handle new new_dcr() calling
950 kes Work more on the Volume management in the SD. Remember Volumes
951 for tape drives and for autochangers (even virtual disk changers).
952 kes When looking at the Volume list to reserve a drive, handle
953 autochanger names correctly by interating through the changer
954 devices. Also call the Director to see if a Volume is suitable
956 kes Fix some bugs in bscan. Make sure all media records are written.
957 Make sure that valid JobMedia records are written for disk files.
958 Previously they were completely wrong.
959 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
960 that the URLs don't change and so that the developers will all
961 work off the same copy. Rebuild from scrach.
962 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
966 kes Fix seg fault in FD from incorrect digest size.
967 kes Fix argument to non-OpenSSL crypto.c subroutine.
971 kes Remove a few malloc()s from the encryption code.
972 kes Use the class calls to bsock in filed/backup.c and restore.c in
973 place of the old bnet_xxx code.
974 kes Implement code that does an on the fly calculation of the
975 signing digest during restore of encrypted files. It makes
976 a best guess at the algorithm, and if it is not correct, will
977 then revert to the old code which reads the file after it is
979 kes Implement at least one missing crypto stream in stream_to_ascii()
980 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
981 #877 where a reload with bad syntax causes Dir to exit.
983 Cut: 2.1.14 beta (not released)
985 kes Do not free a volume on a tape drive until another volume is
986 mounted and read, or the autochanger unloads the volume.
987 This should help the SD re-use volumes that are already mounted,
988 and should fix bug #886.
989 kes Apply patch from user brettedgar that allows gnome2-console include
990 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
991 kes Apply patch from Lucien Weller that fixes day of week calculation
992 because of DST flag problem. Fixes bug #887.
994 kes Move find_next_appendable_volume() to after acquiring a valid device
995 in reserve.c. This fixes bug #864 -- confirmed by reporter.
997 kes Unable to reproduce bug 872. However added additional testing for
999 kes Bug #874 resolved by documenting SQLite limitations.
1000 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1001 kes Bug #881 resolved by removing typo in mtx-changer script.
1002 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1003 approval. Added a link to the wiki on the web page, and implemented
1004 a backup from http://paramount.ind.wpi.edu
1006 kes Fix update allfrompool to pass pool name.
1008 kes Convert to pure GPL v2 license.
1009 kes Fix sscanf problems reported by Peter Buschman that caused
1010 a bus error on Solaris.
1011 kes Rework (simplify) the select prompt in bat.
1012 kes Move get_jobid_from_tid() into lib and create a
1014 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1015 should definitely fix the problem of lost error messages in the
1017 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1018 kes Eliminate tcpd.h from the project. Enclose the #include from the
1019 library with extern C ...
1020 kes Add print of signal name when a signal is trapped.
1022 Release: 2.1.12 beta
1024 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1026 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1027 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1028 makes SQLit3 run 30 times faster, though a bit less safe.
1029 kes Implement --with-batch-insert in configure and detection of thread
1030 safe libraries. It is on by default, but turned off if no thread
1031 safe library (e.g. SQLite 2) is available.
1033 kes Fix Bacula PostgreSQL buffer overruns.
1034 kes Do better checking for NULL results returned from PostgreSQL;
1035 implement retry for failed queries; clear results buffer after
1036 failed query. Hopefully this will correct the PostgreSQL failures.
1038 kes Implement algorithm to handle only one appendable volume with
1039 Prefer Mounted Volumes = no.
1040 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1041 returned from a query.
1042 kes Make volume lock recursive.
1043 kes Implement an additional volume reservation algorithm that
1044 starts by considering all reserved volumes then uses the
1045 old brute force algorithm of searching the resources to
1046 find a suitable device.
1047 kes Add new reservations debug code and refine the old code.
1048 kes Update the win32/dll/bacula.defs file.
1050 kes Tweak reservations algorithm to permit a few more cases, i.e.
1051 volume reserved, but on different drive, ...
1052 kes Enhance SD status to include Pool and Media Type for drive in a
1053 more readable format (a bit longer).
1054 kes Fix PostgreSQL double free.
1056 kes Minor refactoring of restore decryption code.
1057 kes Add code to smartall.c to detect double free of a buffer.
1059 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1060 so that bsmtp will create a correct email address (mailbox only).
1061 kes Modify 'memory' command so that the buffers are listed as 'In use'
1062 to avoid confusion with Orphaned buffers.
1063 kes I reworked the OpenSSL include/lib flags to be handled in
1064 the standard Bacula way, which should fix bug #863 concerning
1065 non-standard OpenSSL libraries.
1067 kes Implement Help Browser window for bat.
1068 kes Fix reload bug that reset StorageId to zero.
1070 kes Fix TLS #ifdefing when TLS turned off.
1071 kes Ensure that when labelling a tape with Slot=0 that InChanger
1073 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1075 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1076 add DISTINCT (required by PostgreSQL).
1077 kes Implement BSOCK authenticate_director() method. Eventually will
1078 authenicate all daemons.
1079 kes Move several more functions into the BSOCK class.
1081 kes Add code to tell the OS that we no longer need a cached
1082 file that we were reading. In findlib/bfile.c. Also,
1083 only cache files that we are reading. Thanks to
1084 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1085 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1086 kes Implement script to automatically generate cats and dll .def
1087 files for Win32 dll.
1088 kes Update README.mingw32 to include new .def file generation.
1089 kes Correct typo in UTF-8 error message as reported by:
1090 jhernandez <julianhernandez@gmail.com>
1091 kes Add additional sm_check() code on debug level 1.
1092 kes Set default debug level to 1.
1093 kes Trap SIGABRT in attempt to get traceback.
1095 kes Reduce bat connect timeout from 30 to 15 seconds.
1096 kes More restructuring and implementing BSOCK class in place of
1098 kes Remove a few unnecessary malloc() tests in crypto code.
1099 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1100 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1101 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1103 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1105 kes Fix Verify InitCatalog. The attributes were not pointing to the
1106 correct saved location.
1107 kes Implement message callback so that GUI is sure to get all
1108 daemon messages. Currently displayed in a dialog in bat.
1109 kes Ignore SIGUSR2 (Bacula timer) in bat.
1110 kes Apply regress patch from bug #859 to allow regress to work
1111 with Solaris compiler.
1113 kes Begin adding TLS support to bat.
1114 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1115 clean up lex.c and make it more readable.
1117 kes Move more bnet functions into the BSOCK class.
1118 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1119 kes Complete change of berrno strerror() method to bstrerror()
1121 Release: 2.1.10 beta
1123 kes Cleanup incorrect email addresses in bsmtp.
1124 kes Make bat display initial messages rather than discard them.
1126 kes First cut of adding .mod to the run command.
1127 kes Implement auto display of messages in bat.
1128 kes Enhanced preferences to allow all Bacula output to be
1131 kes Try to make bsmtp date routines more generic.
1132 kes Fixed bug #856 autochanger documentation.
1133 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1134 kes Add new cats entry point so Win32 builds.
1136 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1138 kes Do better checking for the MySQL 64 bit libraries looking for both
1139 .a and .so libraries.
1140 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1141 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1142 kes Require the thread safe version of MySQL during configure. Thanks
1143 to Andre Noll for pointing this out.
1144 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1145 continuing in migration code.
1146 kes Apply implementation of tray-monitor font derived from gnome-console
1147 submitted by Andreas Piesk <a.piesk@gmx.net>
1149 kes Eliminate important memory loss in SQLite
1150 kes Fixed the batch insert MySQL thread specific data that was not
1151 being freed. See cats/mysql.c:db_thread_cleanup().
1152 kes Fix restore before command.
1153 kes Convert old hdr.name to name() in a few places.
1154 kes Implement update jobid command.
1155 kes Return all time_t dates in db_get_job_record()
1156 kes Stop watchdog in SD earlier.
1157 kes Put Pool just after Storage in please mount message.
1158 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1161 kes Update the po files.
1162 kes Fix Verify InitCatalog by making it cache attributes.
1164 kes Change name bacula-bat to bat for man 1 page to correspond to
1166 kes Check for client and store NULL pointers in status command. This
1168 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1169 kes Fix sign extended editing of %p.
1170 kes Clean out a little old #ifdefing in cats/mysql.c
1172 kes If time diff between DIR and FD is more than 600 seconds convert
1173 INFO message to WARNING.
1174 kes Implement heap size display in status for all daemons.
1175 kes Attempt to fix MySQL db open memory loss (not successfull).
1176 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1177 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1178 Query. This looks like a MySQL but but by doing extra releases,
1179 the memory goes away. This should fix bug #847.
1181 kes When backup fails, cancel SD before waiting for sd termination.
1182 kes If SD is waiting for FD to connect during cancel, wake up the
1184 kes Fix fsf code so that errno is correctly reported.
1185 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1187 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1188 so that Bacula doesn't later stumble into a seg fault.
1189 kes Use the term Restore Client in the restore Job report.
1190 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1191 the original job's FileSetId.
1192 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1193 spooling in migration jobs. Not yet tested.
1194 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1195 reading conf file from a pipe. However, do it with open_bpipe()
1196 rather than popen. Not yet tested.
1198 kes Fix an ugly bug where the VolCatBytes were getting updated
1200 kes Implement bconsole memory command that prints current memory
1201 usage, plus smartalloc dump.
1202 kes Clarify some error messages in backup, admin, and migrate.
1203 kes Shrink label dialog to smaller size.
1204 kes Invert Cancel OK buttons on restore to be OK Cancel.
1205 kes More strerror() to bstrerror() conversions.
1207 kes Start implementing bstrerror() in place of strerror().
1208 kes Stripping path -- seems to work.
1210 kes Prevent door and port files from being restored (mostly
1212 kes Free an unreleased buffer in compat code.
1213 kes Change console Job name from *Console* to -Console- to eliminate
1214 Win32 filename problems. Put Win32 path separator when creating
1215 Console file. This fixes bug #846.
1216 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1218 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1220 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1221 to force Win32 error message.
1223 kes First cut strip path. The data should be passed to the FD,
1224 but nothing is done with it yet.
1225 kes Enhance the digest and signature routines in the crypto
1226 library to accept a JCR and to use it to print error messages
1227 so that they will go in the Job report rather than the daemon's
1229 kes Simplify some of the verify signature code.
1230 kes Simplify a few of the alternative returns in the signature
1233 ebl Use only POSIX regex instead of GNU regex in breg.c for
1234 File relocation. It fix broken freebsd compilation.
1235 kes Convert all other Dir files to use new ua class message
1237 kes Tentative fix for missing digest signature in bug 807.
1238 kes Correct handle problem in new win32_ftruncate routine.
1239 kes Convert ua_purge.c and ua_update.c to use new ua class
1240 message routines for bat.
1242 kes Correct incorrect installation of LICENSE in Win32 installer.
1243 kes Display LICENSE at the beginning of the Win32 install.
1244 kes Attempt to correct the need for the png files to be installed
1246 kes Reapply my bat.conf install script in qt-console. I think I
1247 editted bat.pro instead of bat.pro.in and it was lost.
1248 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1249 the /var/lock/subsys for subsysdir. Also corrects typos in the
1252 kes First cut update job.
1253 kes Correct configure to include qmake of src/qt-console directory.
1255 kes Make restore job yes/mod/no print in one command so GUI works.
1256 kes First cut implementing backup and restore client.
1257 kes Correct editing in Verify output that caused a seg fault.
1259 kes Insure that bat.conf is not overwritten during installation.
1260 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1261 while I was implementing migration in March 2006 !
1263 ebl Cleanup file relocation, using char *RegexWhere instead of
1264 char *where + bool where_use_regexp
1265 kes Update some manpages and add bat manpage.
1266 kes Make a first cut at converting bacula.spec.in for bwx-console
1268 kes Apply patch from John Goerzen to add hostname as fourth argument
1269 to make_catalog_backup script.
1270 kes Fix typos I introduced into bsmtp.c
1271 kes Make pm_strxxx() routines handle input of NULL pointer. This
1272 is to protect from NULL pointers returned from SQL databases.
1273 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1274 kes Add more debug to FIFO code -- fix fifo regression test.
1276 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1277 kes Add thread timer to bnet_connect() to break from OS if wait time
1280 kes Update Win32 build to include new files, new symbols, and
1282 kes Implement socket level heartbeat (tcp_keepidle)
1283 ebl Commit File relocation patch
1284 kes Make bat have 'make install' target.
1285 kes Warn during install if old gnome-console binary found.
1286 kes Warn during install if old wx-console binary found.
1287 kes Add -8 option to bsmtp command line to add content type utf-8.
1288 Fixes bug #809. (Character coding problem in bsmtp).
1289 kes If < is found in target (from, to, cc) then do not enclose the
1290 target in < > in bsmtp. Fixes bug #772 (malformed address).
1291 kes When printing certain items in dbcheck, stop after 300000.
1292 Fixes bug #822. (dbcheck loops).
1293 kes Incorrect status in Dir after waiting for mount with poll set.
1296 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1298 kes Print waiting to reserve a device every 5 mins.
1300 kes Don't call close_part in label.c if tape and relabel.
1301 kes Don't free volume if busy in close() -- should help with
1303 ebl Fix #824 RunScript bug (After script could be execute twice)
1304 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1305 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1306 Add a regression script to test RunScript
1308 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1311 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1312 deprecated. No additional bugs will be fixed, and they will be dropped
1313 in a future release (probably 2.4.0).
1314 kes Change name of wx-console to bwx-console to make it more Bacula
1316 kes Change the name of gnome-console to bgnome-console to make it
1319 kes Some time in March, a Feature Request with patch from Jorj Bauer
1320 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1322 The ability for the director to validate a Client (FD) CN against
1323 an arbitrary set of patterns rather than the hostname, with
1324 A new 'TLS Allowed CN' set of directives which are implemented
1325 in the Client resource. Then pattern matching is used in place
1326 of hostname matching against the Certificate's CN. As an example, we
1327 have certificates which (a) use a local CA, and (b) have a CN of the
1329 kes Add new/changed entry points to Win32 build
1330 kes Create unaccepted-projects for projects that are not accepted.
1331 kes Simplify locking in the reservations system.
1332 kes Add more debug code in reservations.
1333 kes Make sure error condition on reserving a volume is handled correctly.
1334 kes Correct handling of volume_in_use.
1335 kes Correct handling of initializing a device.
1336 kes Move handling of broadcasting releasing a device into release_device().
1337 kes Correct attaching dcr to dev so that it is only done if device
1338 is properly initiated.
1340 kes Locking debug level tweaks in SD.
1341 kes Tweak new Volume code.
1343 kes Add exec external-command [wait-seconds] to bconsole. This
1344 executes the external-command. Note! normally external-command
1345 should be enclosed in double quotes.
1346 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1347 it should normally be off in a production system.
1349 kes Implement die command for SD so that we can force it to dump.
1350 kes Implement SD lock debug code.
1351 kes Implement new algorithm for keeping Volume list in SD. It
1352 is now owned by the device.
1354 kes Implement new code for freeing in use volumes that should
1355 resolve if not all, some of the problems of multiple drive
1356 tape conflicts described in bug 801.
1358 kes Fix gui/bacula-web/images files in svn.
1359 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1361 ebl Fix a bug in batch mode (in string escape)
1362 kes Correct migration prune SQL typo that crept in in a
1363 recent 2.1.x change.
1365 kes Move bnet_despool() into class in bsock.c
1366 kes Modify job report to include director name and Build OS.
1367 kes Move drop root privilege and check_catalog() before fork.
1368 kes Add update database scripts (version 9 to 10) to updatedb directory.
1370 ebl Check size and age of each file after its backup to see if
1371 it has changed during backup, if 'checkfilechanges' is set.
1372 The FD will do an extra check (stat(2)) after
1373 each file backup. mtime, ctime and size are compared with
1374 'before backup' information. If time or size mismatch, an
1375 error message will be generated. You must upgrade FD to use it.
1377 kes Make database name and user configurable
1378 --with-db-name=xxx --with-db-user=xxx
1379 kes Add back database type to message.c for debugging.
1381 kes Implement dir_sql() which issues an SQL query.
1382 kes Modify bat medialist to use dir_sql() and do some minor C++
1383 formatting as well as eliminating a number of pointers, simplifing
1386 kes Fix some of the mtx-changer grep commands for tape label readers.
1387 kes Convert a number of bsendmsg into the appropriate send/warning/error
1388 message class calls.
1389 kes Suppress the using database message in the .sql command.
1390 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1392 kes Add context menu for floating a window.
1393 kes Some minor cleanup and name changes in qt-console
1394 kes Add doing mt setblk 0 in Win32 mtx-changer.
1395 kes Apply Martin's bug fix to move definition of ENODATA for
1397 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1398 sqlite2 and sqlite3.
1400 kes More pruning cleanup.
1401 kes Turn on wait_for_drive by default in mtx-changer.
1402 kes Turn on Batch insert code by default as it now passes regression.
1403 kes Add ./configure --enable-bat to enable building of Bat.
1404 No install yet though.
1406 kes Implement a new .sql command for bat.
1407 kes Implement code to turn off pruning in obtaining the next volume.
1408 Pruning is turned off for the status dir command, but turned on
1409 for SD requests and for the list nextvolume command.
1411 kes Correct Qmsg() that was not updated correctly when committing a
1412 previous change (probably the recent TLS patch).
1414 kes Write new subroutine is_volume_purged() that explicitly checks
1415 if the Volume is purged, and if so marks it as such. This should
1416 resolve problems reported about needing to mount twice to recycle
1418 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1419 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1420 amount of duplicated code.
1421 kes Do volume pruning only for the Media Type desired (reduces pruning time
1422 if multiple Media Types are in the same pool).
1423 kes Implement more detailed info in the Job report for the Bacula version
1425 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1427 ebl Add bbatch tool to bench database and insert mode.
1428 Fix sql quote stuff in batch mode
1429 Fix sql stuff for mysql
1431 kes Correct problems with am/pm scheduling. Fixes bug #808.
1432 kes Implement new prunning code that prunes up to 1000 jobs at
1433 the same time. The same technique can be applied to a number
1434 of other prune/purge subroutines.
1435 kes Add an insanity check when starting a new tape job to ensure
1436 that the tape position has not been changed. If so fail the
1438 kes Fix Win32 build for dlls to add the folllowing:
1439 src/lib/bsock.c -- new file with new entry points
1440 src/lib/dlist.c -- new entry points
1441 src/cats/sql_create.c -- new entry point
1442 src/cats/sql_cmds.c -- new DATA item exported
1444 ebl batch mode cleanup bscan-test is ok now.
1445 kes Implement SD code to check length of disk volume before appending.
1447 kes Correct return status on db_batch... routines.
1448 kes Add call to db_write_batch_file_records() to migration code.
1449 ebl Fix AfterJob timing
1450 kes Move the checking of the database in initializion of the Director
1451 to after we drop privileges. This avoids the need for both root
1452 and bacula access to the DB.
1453 kes Correct a misplaced variable definition in src/filed/backup.c
1454 kes Correct how the new batch insert db_create_attributes_record()
1455 uses the arguments. Caused a seg fault in bscan.
1456 kes Implement lock() and unlock() methods in DEVICE class.
1457 Implement block() and set_block(xx) methods in DEVICE class.
1458 kes Modify bnet_connect() so that it uses time() to check for the
1459 wait time expiring (on some OSes, some system calls may not
1460 return immediately).
1461 kes Modify Verify to obtain the previous JobId when it is actually
1462 running rather than at schedule time (as it was in 1.38.x).
1463 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1465 kes When checking pid in pid file, continue running if the pid is
1466 the same as ours. This occurs on IRIX after a system crash.
1469 kes Extend new GUI API.
1470 kes Make the ua structure a class, and implement send_msg(),
1471 error_msg(), warning_msg(), and info_msg().
1473 kes Apply fix from for building wx-console on the Mac from
1475 kes Implement new select mechanism for GUI programs.
1476 kes Reorganize initialization of stackedWidgets in bat.
1478 kes Add updated nagios plugin supplied by Christian Masopust.
1480 kes More bat implementation.
1481 kes File migrate bug with Pool Occupancy using mediaid instead
1482 of jobids. Fixes bug #795.
1483 kes Fix orphaned buffers in filed backup and verify due to
1484 crypto buffers not freed during errors. Fixes bug #789.
1485 kes Extend new GUI api code to tree commands.
1486 kes Ensure that tree and dot commands check console ACLs.
1487 kes Permit marking directory with trailing slash.
1488 kes Allow 20 console connections (instead of only 10).
1490 kes Add smartctl call to bacula-sd.conf as an example of getting
1493 kes Modify jobq.c to let simultaneous restore jobs run. This may
1494 cause them to fail if they cannot get a drive.
1495 kes Add Client Connect Wait to Storage daemon to permit users to
1496 modify the time the SD waits for a FD connection.
1498 kes Correct virtual changer check which was backwards. This caused
1499 volumes to be unloaded into slots already occupied.
1501 kes Apply Command ACL filter to JobId list in restore command.
1502 kes Correct typeo in var.c patch.
1504 kes Don't let Bacula prune File or Job records for the current Job.
1505 kes Fix variable substitution pad + inc bug reported (with patch)
1508 kes Correct SQLite log table index as reported by Luca Berra.
1510 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1512 kes Begin implementing new comm signals for API.
1513 kes Fix a few places in lib/message.c where the open fd may
1515 kes Continue implementing lib/bsock.c (real class). Make jcr,
1516 who, host, and port private. There are new methods to access
1517 them for non-class use. This required touching a number of files.
1519 kes Add LANG=C to autoconf/randpass so it works with languages other
1520 than English. Fixes bug #788.
1522 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1524 You will not be able to generate Include/Exclude list any more.
1525 It will be fixed soon.
1526 If you want to use this, you can apply
1527 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1529 kes Restore of sockets created false error messages because Bacula
1530 no longer restores sockets, but the code was still trying to
1531 set the attributes on a non-existent file. Reported by a user.
1532 ebl finish RecyclePool feature
1533 Media will takes Pool.RecyclePool
1534 when moving from Scratch to a Pool or when user will do
1535 update volume=xxx frompool
1536 To use it, add RecyclePool = aPool to your Pool resource
1539 RecyclePool = Scratch
1543 kes Expand new BSOCK class adding signal() and new BNET signals.
1544 kes Begin enhancing the dot commands adding a new API function
1545 that returns more information and will make it easier
1546 to interface to the Director from a program.
1548 kes Make DEVICE fd private. Its new name is m_fd, and can be
1549 obtained with dev->fd() outside the class. This is the
1550 first of many DEVICE members to be made private.
1551 kes Implement Michael Renner's idea on having a virtual disk
1552 changer. I made some minor modifications (e.g. I did not
1553 implement the Virtual Changer directive, but simply set
1554 the Changer Command to an empty string.
1556 kes Implement a BSOCK send() method that writes the whole record
1557 in a single write() request rather than in two.
1558 ebl add update volume=xxx recyclepool=yyyy
1559 volume takes recyclepool from pool when using update volume=xxx from pool
1561 kes Fix encryption deblocking bug, which caused some restored files
1562 to be truncated. This fixes bug #763.
1563 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1564 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1566 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1567 ebl Use btime_t instead of uint64_t in media patch.
1569 kes Optimize the use of the database a bit in the Status dir command.
1570 Only open it when needed, ensure that if any previous database
1571 was opened, it is closed.
1573 kes Correct VolCatBytes bug from media patch.
1574 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1575 in the case of orphaned records.
1576 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1577 and File records in 300K chunks to be more efficient. This
1578 idea came from Juan Luis Frances (if I remember right).
1579 kes Apply Eric's scratch patch that moves a purged Volume to
1580 the RecyclePool. Question: how is RecyclePool set? what
1581 happens to the ScratchPool?
1582 kes Apply Eric's media patch that collects read/write media
1583 times as well as byte counts. This patch requires a
1584 simultaneous upgrade of the DIR and SD. Note, there
1585 should be some way to turn off timing. I'm not sure
1586 times are in Bacula units.
1587 kes Apply Eric's batch-insert patch.
1589 kes Update projects list.
1591 kes Implement Include/Exclude file lists in FD as dlists using
1592 the new dlistString class. This permits efficiently having
1593 large include/exclude lists and completes project Item 25.
1594 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1595 console is authorized to cancel the job. This fixes bug
1597 kes Modify SD so that the VolCatJobs medium record is updated
1598 at the beginning of a Job rather than the end. This
1599 fixes bug #775 where exceeding MaxVolJobs caused jobs
1601 kes Added a mutex around getting and setting Volume information
1602 so that multiple simultaneous jobs will single thread.
1604 Switch to using Subversion
1605 kes Remove src/pygtk-console/ from configure
1607 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1608 plus the entrypoints.
1609 kes Apply patch supplied that corrects debug print
1610 in canceling jobs for max run time. Supplied as
1611 part of bug #621, which was previously fixed.
1613 kes Test on job_canceled() and sd_msg_thread_done inside
1614 loop starting the message thread to avoid a race condition.
1616 kes Remove rl_catch_signal from console.c as it conflicted
1617 with the header definition. Fixes bug #765.
1618 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1620 kes Clarify some stored/acquire messages to indicate if the
1621 problem is with read or append.
1623 kes Fix memory leak with storage ids in cats/sql_get.c
1624 kes Terminate watchdog earlier to avoid reference to released
1625 memory -- reported by Jason Austin.
1626 kes Move closing the database from jobq.c to the director daemon
1627 termination routine. This fixes memory leaks for shadow jobs
1628 (i.e. migration jobs).
1629 kes Free up the unique jobid chain items in migrate.c. This fixes
1630 a memory leak problem.
1631 kes Convert some ugly looking for statements to use foreach_alist
1632 in findlib/find.c. This will facilitate converting the structures
1633 to use dlist (for large include/exclude lists).
1634 kes Fix a bug in the btree.c and btree.h routines, then rename them
1635 rblist and add them to be built in src/lib. Include some new
1636 methods written by Rudolf Cejka that make the code more readable
1637 (hides some of the ugly casting).
1638 kes Add set_next() and set_prev() methods which make the code much more
1639 readable. Also add a new dlistString class that facilitates storing
1640 strings in dlists. To be used in the large include/exclude lists.
1641 kes Make some trivial modifications to lib/tree.h that use rblist
1642 rather than dlist for storing the tree links. This was suggested
1643 by Rudolf Cejka. The result of this is that the restore tree now
1644 uses red-black binary trees rather than simple linked lists. This
1645 should give rather dramatic speed improvements for directories
1646 contining large numbers of directories/files (more than 10000).
1648 kes Fix maxruntime bug #621.
1650 ebl Implement the include JobID in spool file name project.
1651 kes Reorder projects file in order determined by Jan 2007 vote.
1652 kes Implement item #12 on project list -- quick release of FD by
1654 kes Fix open of SQLite3 db where user does not have write permission
1655 so that DIR does not crash. Fixes bug #761.
1657 kes Add back missing @ in Win32 Makefile.
1658 kes Change 'Device not configured to autolabel' from INFO
1660 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1661 which should restart an indefinite # of times.
1662 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1663 other DIR specifications.
1665 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1666 Fix path quoting in SQLite scripts.
1667 Fix problems with SHGetFolderPath.
1669 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1671 kes Fix Job restart on error bug that promotes an Inc to a Full
1672 backup. This should fix bug #755.
1673 kes Add qt-console and first cut of code.
1677 kes Fix Bacula->Documentation link on Win32 to point to index.html
1678 instead of bacula.html. Fixed bug #750.
1679 kes Return JobId in db_get_job_record() when JobId==0. This should
1681 kes Do not release source pointers when restarting a failed job.
1683 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1684 This *should* fix bug #747.
1685 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1688 kes Modify USTORE constructor to set an empty store_source string,
1689 and don't copy the store_source string in a cancel. Hopefully
1690 this will fix Arno's seg fault, bug #744.
1691 kes Add back code to disable conio in configure. Fixes bug #743.
1692 kes Correct the Options scanner in the FD to correctly handle
1693 SHA1 option, which was eating the next option. Reported by
1695 kes Add code to indicate when the SD is spooling, spool wait, and
1696 despooling as requested by Alan Brown.
1698 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob