1 Technical notes on version 2.3
5 kes Second cut of drive switching during backup.
8 kes Update Win32 version of wxWidgets to most recent version.
9 kes Tweak Copy job details.
10 kes Rework dir_find_next_appendable_volume to make a bit more effort
11 to find a suitable volume before giving up.
13 kes Make ask_sysop_to_create... to return if waken from wait.
14 This helps get out of blocked conditions.
15 kes Experimental implementation of switch_device in reservations.
16 kes Implement FD version to allow easier protocol changes.
17 kes Add Plugin Options string -- not yet passed to FD.
18 kes Implement PluginOptions ACL.
20 kes Attempt to correct problems with restores with autochangers and
21 use counts going negative
22 kes Rework SD status command and implement API for bat. Implements
23 header, runing waitreservation, devices, volumes, spooling,
24 and terminated status keywords.
25 .status storage=xxx <keyword>
26 kes Clarify TLS error message by adding double quotes around name.
27 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
28 kes Pass jcr to tls routines so debug messages can be handled better.
29 kes Rework jobq resource allocation code, and possibly fix a bug
30 that caused reference counts to get out of sync.
32 kes Rename fd/dir plugin to use Bacula standard underscore.
33 kes Plugin work -- bring dir up to fd level.
34 kes Start implementation of VTL code
35 kes Fix Win32 build after adding new cats subroutine.
37 kes First cut at Duplicate Job implementation.
39 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
40 kes Start PluginOptions string, and refactor a bit of ua_run.c
41 ebl Apply Allan patch that permit to reset recyclepool.
43 kes Test patch -- possible fix or improvement for bug #1053
44 kes Refactor FD and SD status commands to permit new API code in
45 SD, and to fix Win32 build.
46 kes Win32 build is now working.
48 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
49 some ideas in patch from Scott Bailey.
50 kes Begin implementation of duplicate Job control.
51 kes Fix some of Win32 build after recent additions.
52 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
53 which causes the FD to detect whether or not the OS has the
54 honor no dump bit (*BSD systems), and if so, to skip backing up
55 any file with this bit set. The feature is enabled by setting
56 'honor no dump flag = yes' in the Options section of a FileSet.
58 kes Correct po warning message with datarootdir
59 kes Implement more code in dird.c to put configuration parsing in
60 a class rather than use globals.
61 kes Restructure SD status command for implementation of bat API
64 kes Suppress incorrect 'Will not descend from x into y' messages.
65 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
66 daemon globals used by parser.
67 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
69 kes Fix free of plugin_list when none exists.
71 ebl Apply accurate project patch.
73 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
74 on non-mempool object)
75 kes First cut of converting FD .status to work with bat API.
77 .status client=XXX header
78 .status client=XXX running
79 .status client=XXX terminated
80 kes Implement first cut of Copy Job.
81 kes Implement Catalog in Pool resource. It overrides catalog specified
82 in the Client resource.
84 kes Apply patch (with some difficulties) from Joao Henrique Freitas
85 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
87 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
88 ftruncate() actually works. In the case of some (cheap) NAS devices,
89 it does not, and so recycling NAS Volumes does not work. The code
90 simply unlink()s the file, then recreates it. This fixes bug #1011.
92 kes First incomplete cut of big malloc blocks for htable.
93 kes Tweak plugin code.
95 kes Plugin debug code + tweak a couple bat dialog layouts
97 kes Fix creating first JobMedia record during Migration to include
98 proper index. This caused slow restores of migrated jobs.
99 kes Temp fix to plugin name file_index.
100 kes Bacula backed up and restored a MySQL database.
102 kes Implement plugin restore.
103 kes Implement parsing of db_driver to give db_type index.
105 kes First cut of plugin restore code.
106 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
107 and do not strip paths on symbolic links.
108 kes Set catalog backup database and user name from values specified on
109 the ./configure line.
110 ebl Fix #1031 about wrong pool source information in job report.
113 kes Remove a redundant jcr argument to find_files, match_files, and
115 kes Implement '.status dir header|scheduled|running|terminated' that
116 prints the requested status section. With the exception of the
117 header, the other reports have fields separated by tabs (\t).
119 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
120 a resource embedded run command to find a since time if no explicit
121 since time was supplied on the command line.
122 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
123 that updates the state file at job termination time in addition to
124 when the daemon terminates.
126 kes First version where a plugin did a backup.
127 bpipe-fd.so created a backup file, wrote a test
128 string to it, and Bacua could restore this fabricated file.
130 kes Implement DB Driver = string for the DBI driver.
131 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
132 kes First cut of code for loading Win32 plugin dlls. Implement
133 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
134 and implement a dlfcn.h file based on opengroup's definitions of
137 kes First cut plugin directives.
139 kes Apply patch from bug #1049 to prevent stripping the path on a
141 kes Attempt to fix bug #1047 where stripping a path corrupts the
142 heap. Waiting for feedback.
143 kes Correct the Mount message not to suggest labeling a new tape
144 when doing a restore. Submitted by email by John Stoffel.
145 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
146 FD by using casting. Reported in bug #1042.
148 kes A bit of crypto cleanup. More later.
150 Release Version 2.2.8
152 kes Apply patch from Martin to correct bug #1040, bscan sets existing
154 kes Fixed important spelling error in doc -- bug #1045.
156 ebl Fix bextract to be able to extract non-portable Win32 data to
158 kes Move initialization of read/write res lock earlier in the code.
159 This fixes the crash with a null conf file. This fixes bug
161 kes Redefine CURES in lib/parse_conf to be URES and move it all
162 into lib/parse_conf.c -- this responds to bug #1042, but does
163 not fix it. The fix is not to compile with FORTIFY_SOURCE.
164 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
165 the trunk SVN. I don't think this was reported as a bug.
167 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
169 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
171 kes Add DataDespooling and DataCommitting status (committing is
172 the last despooling).
173 kes Finish implementation of new reservations code noted below.
175 kes Fix bsnprintf for float point numbers. I broke recently when
176 parameterizing some variables. This fixes bug #1036.
177 kes Undo recent reservations changes ... will apply them later
178 when they work better.
180 ebl Fixes #1034 which cause mysql to hang the connection after 8h
181 ebl Change default statistics target of filename.name and path.path
182 fields for PostgreSQL. This speeds lookup by indexes. Thanks
184 kes A few more tweaks to new reservation code. Make sure to clear
185 vol released flag when retaking volume. When reading label and
186 label is bad mark volume unused. When recycling, mark volume
187 unused so it can be renamed.
189 kes Fix reserve_volume() so it doesn't release a volume in use
190 (i.e. a volume entry not marked released). This should be
191 the last part needed to fix bug #1018.
193 kes Move Heartbeat documentation from Job to Director resource.
194 This fixes bug #1033.
196 kes Fix existing switch drive SD code to call autochanger to release
197 any old volume. This must be done to keep the autochanger from
198 releasing subsequently newly reserved volumes in doing a close().
199 This should fix bug #1018.
200 kes Fail if attempting to get console input in batch mode. This
201 should help fail RunScript console commands that are incomplete.
202 kes First cut implementing switch_drive() in SD (not actually called).
204 kes Implement first cut running console commands in a RunScript.
206 ebl Fixes bug #1028 where 'Selection Type' option was not usable
208 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
211 Release Version 2.2.7
213 kes Add new free_tls() entry point so that Win32 builds.
214 kes Fix compile warning in src/lib/util.c
215 kes Fix entry point for edit_job_codes() so that Win32 builds.
216 kes Fix seg fault Frank Sweetser reports in regression testing
217 on his systems. The problem was that the original author of
218 bsnprintf.c did not take into account the side effects of
219 using ++x in the argument to a #define.
220 kes Make SD protocol backward compatible with version 2.2.x.
222 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
223 because Bacula no longer restores sockets.
224 ebl Always use ignorecase fileset option on win32 FD.
226 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
227 that implements double quoting include names in conf files,
228 and also allows piping input by having the first character
229 be a vertical bar (|).
230 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
231 that implement %f in RunScripts to pass the FileSet name.
232 kes Skip leading | when lex input comes from a pipe as suggested
233 by Michael Stapelberg <michael@stapelberg.de>.
235 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
236 Nerijus Baliunas <nerijus@users.sourceforge.net>
238 kes Implement Plugin Directory and plugin events.
240 kes Implement a security enhancement: TLS authentication but no
241 encryption. Enabled by setting 'TLS Authentication = yes'.
242 Note when this is on, TLS encryption is turned OFF!
244 kes This patch corrects a problem where the maximum concurrent storage
245 jobs counter gets out of sync during restore jobs causing jobs to
246 'wait on max Storage jobs'. This patch fixes bug #1009.
248 kes This patch fixes bcopy so that it produces correct Volumes.
250 kes This patch eliminates spurious output to the console during a VerifyVolume
251 job that contains encrypted data. It fixes bug #1024.
253 kes This patch prevents the 'status dir' command from trying to use a scratch
254 volume and possibly moving it from one pool to another. This patch fixes
257 kes Add new include to postgresql.c suggested by Marc Cousins so
258 that it compiles correctly with pgre version 8.3.
260 kes Fix --archivedir addition to configure. Replace it with
261 --with-archivedir in configure.in This fixes the regression
263 kes This patch fixes bug #1012 where the job is canceled because
264 of Max Run Time exceeded when the job has not yet started.
266 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
267 one 'part' to write. Instead of each part being stored on disk,
268 written to DVD, then deleted from disk, all parts are written to disk,
269 and only the last is written and deleted from disk.
270 kes This patch fixes the status command to include the formating string for
271 JS_AttrInsterting. It fixes bug #1021.
272 kes This patch should fix the Mac OS X build problem on the latest
273 Darwin, where sys/types.h was not included correctly (apparently
274 due to a change in the Mac headers). The solution was to explicitly
275 ensure that it is defined for the ./configure.
276 This patch also has a rebuild of configure that includes the Debian
277 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
278 kes This patch should ensure that queued messages to the console are
279 displayed as soon as possible. It should fix bug 1007, but has been
280 reported not to work.
282 kes This patch fixes the infinite loop when trying to increase the
283 maximum number of volumes in a Pool during the add command.
284 This patch fixes bug #1008.
286 Release Version 2.2.6
288 db Remove extra data on estimate command in joblist for bat.
290 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
291 really change anything, but is the beginning of doing it *right*.
292 To do it completely right the LastWritten date must be passed to
293 the SD, but it is not yet done.
294 kes Minor tweaks to some bat restore SQL.
295 kes This patch fixes bug #1003 where putting the message output from
296 a Verify job into the catalog results in a recursive loop. The problem
297 seems to show up only with postgresql (to be verified).
298 kes Correct %x to %p in postgresql debug statement.
300 kes Fix bug #942 where lots of emails where generated when the heartbeat
301 interval was low and Bacula wanted a different tape from the one in
304 ebl Add new SD despooling attributes and Dir inserting attributes
305 job status codes in the catalog (Status table).
307 ebl Use qmake-qt4 instead of qmake when available (debian system).
309 kes Add a security warning to src/cats/make_catalog_backup.in indicating
310 that passing the password via the command line (arg 3) is insecure.
311 This responds to bug #990 (it doesn't fix it).
313 kes Set default debug_level to zero. This corrects bugs #991 and #993.
314 kes Fix a crash in bat when it cannot connect to the Director for example
315 if the Director is not running.
316 kes Remove redundant INDEX (JobId) from File table in the trunk.
318 kes Make explicit exception to GPL in LICENSE to permit linking
319 the Win32 FD with Microsoft VSS code.
320 kes Apply the Solaris package patch from
321 Masopust, Christian <christian.masopust@siemens.com>
322 kes Apply the patch to optionally add a timestamp in the debug output
323 submitted by Mariusz Czulada <manieq@wp.eu>.
325 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
326 backend (sql_strerror). Fixes bug #989
328 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
329 It applied with no problems.
330 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
332 kes Redirect stderror to stdin on mt status command in mtx-changer.in
333 since the status is returned on stderr on Solaris.
334 kes Activate Close button on tray-monitor window. This fixes
336 kes Check for NULL item in parse_conf.c before calling it. In the
337 case of Device, there is no item and this caused a seg fault when
338 Device appears in the conf file.
339 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
340 avoids pulling in config.h multiple times in some new code.
342 kes Fix spurious warning message printed when creating a volume with
343 a LabelFormat. This fixes bug #976.
345 Release Version 2.2.5
347 kes Add JobId in place of Job name in all the Jmsg() output.
348 kes Correct the APP_DESC for the Win32 storage service (remove an e).
350 kes Make maxvol-test and new more strict maxvol2-test work.
351 kes Print JobId in all Jmsg() job output.
353 kes Add new SD despooling attributes and Dir inserting attributes
354 job status codes. This fixes bug 961.
355 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
357 kes Fix doc issue. This fixes bug #963.
358 kes Fix listing performance problems in bat. Pointed out by
360 kes Remove old debug code.
361 kes Fix bat code that tests for Win32. This should fix bug #968
362 kes Query 5 list wrong Vol after migration. This fixes bug #960
364 ebl Fix #969 where user can't change Replace option in restore menu.
366 kes Save jcr in thread specific data (tsd) for each thread.
367 kes Make Dmsg() print JobId as -%u.
368 kes Make Jmsg, Emsg, and others automatically pickup the jobid
369 for the thread if it exists.
370 kes Remove old reservation debug jid code.
371 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
372 ebl Add an option that permit to specify spool size in job
373 definition. (Applying patches/testing/spoolsize_per_job.patch).
374 You must upgrade SD and DIR at the same time.
375 dvl Add new configuration item --archivedir
376 dvl Adjust regression tests to use tmp not /tmp. This will allow
377 multiple concurrent runs of the regression tests.
379 kes Fix race condition that drops final block written to volume.
380 This happens in rare cases with multiple simultaneous jobs
381 when the Volume fills. This fixes bug #964. May be related
382 to bug #935 and possibly #903.
383 kes Eliminate more strerror() and replace with bstrerror().
384 kes Remove BSD getopt and replace with unrestricted IBM version.
385 kes Fix Win32 build for changed calling sequences.
386 kes More tweaks to the mount volume routines to get everything
387 right. Changed variable name from find to have_vol, which is
388 much easier to understand.
389 kes Enhance btimer debug code.
391 kes Fix FD->SD authorization failure, which was due to spurious
392 wakeups from a pthread_cond_timedwait(). Simply check the
393 predicate before continuing. This fixes bug #953.
394 kes Add const char where needed (more to do). Remove temp debug code.
396 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
397 kes Don't overwrite error message in check_tables_version.
399 kes Unlock batch insert tables with same calls used elsewhere.
400 kes Allow starting 59 jobs a second.
401 kes Make SD session key more random.
402 kes Add retry for SQLite opening db if it fails. Probably helps
404 kes Suppress extra error messages during batch insert failure.
406 kes Add jcr to timer packets so if killed message can be sent to job.
407 kes Add JobId to all Dmsg() output.
408 kes Put some FD auth code on dbglvl rather than fixed.
409 kes Return insert attributes error message in db msg buffer to avoid
410 false error messages. Helps fix bug #966.
411 kes Separate batch init error messages. Probably helps fix bug #966.
412 kes Make SD code that contructs attribute insert check string lengths
414 kes If Dir gets an error during inserting attributes, cancel SD.
415 This reduces unnecessary error messages.
417 kes Correct search boolean for getting Volume info
418 ebl Cleanup batch insert code. Probably fixes bug #965.
419 kes Back out one small change to the reservation system (reserving a volume).
420 kes Rework how a Volume is mounted. It is now much more intelligent and
421 will always attempt to use any mounted volume if possible and reduces
422 calls to the Director asking about volumes.
424 kes Turn off some code when batch insert not enabled.
425 kes Edit FD name in connect error messages.
426 kes Rework the reservation system to take into account that the Director
427 might give us a Volume that is different from the current one being
428 used, and to ensure that we don't exceed Maximum Volume Jobs.
429 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
430 fatal error with multiple jobs running'
431 kes Add more debug code in reservation system.
432 kes Implement maxvol-test to check bug #947.
434 kes Add code to handle tray monitor separated from Win32 FD.
435 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
437 kes Add missed return in fixing verify bug -- trunk only.
438 ebl Fix a command parser issue causing a director segfault.
439 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
441 kes Increase the max block size to 4MB fixes bug #957.
442 kes ERABT if user sets min block size > max block size. Fixes bug #956.
443 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
444 is not properly mounted (recognized) during a poll.
445 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
446 Job that has differences reports Verify OK.
447 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
449 ebl Add an option to operate on all pools with update vol parameters.
450 This complete the project 20. Patch from Nigel Stepp.
451 ebl Add history support to bconsole when using readline.
452 Using Ctrl-D to exit doesn't update .bconsole_history
453 kes Modify new volume algorithm to use max MediaId for generating next
454 volume number rather than the count of Volumes. This should essentially
455 eliminate the failure rate if some volumes were deleted. Bug #921.
456 kes Begin implemention of Optimize Job Scheduling.
457 kes Implement restore callback that Dirk and I agreed on for bat
458 restore. This fixes bug #928. Restore of backup of zero files fails.
459 kes Fix SQL Catalog logging which broke with new db_escape_string
462 Release Version 2.2.4
464 kes Fix bacula_cats.def for new db_escape_string().
465 kes Increase size of name string when FD making connection to SD.
466 May fix bug #953. FD->SD connection failure.
468 kes Add code to help Dan debug 2drive-incremental-2disk test.
469 kes Add code to try to fix bug #908.
470 kes Add waits to multiple exit detection code to try to force pid
471 file to always be deleted.
472 kes Restore good dev.tar.gz to rescue set appropriate binary property.
474 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
475 trying to switch drives by checking for blocking before unblocking.
477 kes Cancel storage daemon in all cases where FD reports error. This
478 should fix virtually all cases of bug #920.
479 kes Fix db_escape_string() for MySQL which did not compile.
481 kes Fix error message that was clobbered when Dir tells SD it does not
482 have write permission on Volume. This should fix a minor point
483 in bug #942, but not the main problem.
484 kes Add code to cancel job in SD if FD connection fails. This should
486 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
487 dvl Pass jcr and db into db_escape_string() to enable better escaping
489 kes Fix migration code to get correct Volume name with multiple volumes
490 by skipping |. Fixes bug #936.
491 kes Implement patch supplied by Landon to fix bug #944 where using
492 TLS with bconsole uses 99+% of the CPU.
493 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
495 kes Move patches into patches directory.
497 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
500 ebl Using 'm' in bconsole will show messages like before,
501 and not memory usage.
502 kes Fix bug #935, and probably also bug #903 where files were not
503 restored. MediaId was not properly set in JobMedia record after
506 kes Suppress chown and chmod error messages if the FD is not running
509 kes Apply Martin Simmons' patch that should turn off the new API usage
510 when batch insert is turned off allowing building on older
512 kes Add ./configure search in qwt-qt4 for qwt package
514 kes Bacula is now free of 3rd party GPL copyrighted code!
516 kes Add guid_to_name.c/h which replace idcache.
517 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
519 ebl Detect if new PosgreSQL batch insert API is present.
520 kes Correct incorrect mempool call causing Director crash. Occurs on
521 systems without va_copy().
522 sb Update spec files for 2.2.1 release
524 kes Fix memory pool call in ua_output.c. bug #934.
525 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
526 Add test program to fnmatch.c
528 kes Integrate patch to README.vc8 from
529 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
530 edit it to get it into Unix patch format.
531 kes Implement mkpath.c to replace old FSF makepath.c
533 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
535 Release Version 2.2.1
537 kes Update POTFILES.in
538 kes Cleanup a few underquoted AC_DEFUNs in configure
539 kes Apply patch from Martin Simmons that adds a test for va_copy to
542 kes Fix bug #921 by increasing the number of tries to create a new volume
544 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
545 can be called multiple times. Implement a version for machines
546 without va_copy() that gets a big buffer.
548 kes Integrate more portable zone offset code into bsmtp.c
549 Submitted by Attila Fülöp.
551 kes Fix bad SD->FD return status reported by
552 (James Harper) <james.harper@bendigoit.com.au>
553 ebl Fix a bug in read_close_session which return random status
554 thanks to James Harper
556 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
557 and directory names during restore of single file/directories.
558 kes Add sanity checks to .sql command when string is empty. Hopefully
559 that will resolve Dirks Director crash.
561 kes Apply patch submitted by Martin Simmons that corrects a seg fault
562 in the bsmtp chat subroutine when debug is >= 10.
564 kes Fix Director crash when running bat SQL queries.
565 kes Add David's notes on Item 8: Copy pools.
567 kes Rework projects file to be current and ready for a vote.
568 kes Enhance lex scanner error message.
570 kes Tweak LICENSE file to mention BSD code.
571 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
572 if specified on the ./configure.
573 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
574 This class is intended to allow us to open a second bsock to the
575 Director while in the restore subdialog.
577 kes Fix configure to create bat Makefile before creating dependencies.
578 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
579 kes Add a tooltip to the tray monitor.
580 dvl Set the Director's PID file before dropping privs. This fixes
583 kes Update AUTHORs file
584 kes Increase the default max concurrent jobs to 20 in FD and SD to
585 correspond with the default .conf files.
586 kes Rewrite the Win32 service routines. This eliminates the 3 copies
587 some different, of the same file created by RN when porting the
589 kes Rearrange some of the Win32 directories and the placement of the files
591 kes Set DEVELOPER flag in version.h
593 ========================================================================
594 Release Version 2.2.0
596 kes Apply a second doc patch from Marc.
597 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
598 improves the tips section that discusses how to setup multiple
601 kes Update bat README file.
602 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
603 corrects a typo in the Recycle status check in db_find_next_volume().
604 This will probably fix a number of annoying problems with multiple
606 kes Modify most of dird/msgchan.c to use bsock class calls rather than
607 bnet calls -- no functionality change.
609 kes Modify the Verify output to specify if files are missing on
610 the Volume(s) or disk. Fixes confusion in bug #916.
611 kes When more than one Volume is read in a migration job, the last
612 Volume bytes reported are from the last read volume rather than
613 the last written volume. Fixed. This fixes bug #910.
614 kes Fix display of Recycle flag after update volume=foo recycle=yes.
615 It previously printed New Recyle flag is: no. This fixes bug
618 kes Correct seg fault when switching tape drives during restore.
619 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
620 be used until after 2.2.0 release.
622 kes Remove fnmatch() in SD that permitted wild card specifications.
625 kes Fix %g in filename returned by SQL for browse tree reported by
627 kes Fix configure so that it puts config.out in the cwd rather than
629 kes Attempt to fix the locking problem reported by Eric in bug #906.
630 kes Make berrno class to leave errno unchanged after constructor call.
631 kes Make bnet_server use the heap rather than the stack to allocate
632 its socket fd pointers to avoid a crash at termination. Problem
633 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
635 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
636 and putting it in depkgs-qt along with Qt4.3.
638 kes Rework code in acquire.c that switches drives for reading when
639 the Media Type does not match. This should fix bug #906
641 ebl Fix a director segfault during job setup #907
642 kes Correct seg fault in postgresql when first operation returns no
643 rows. Fixes Dirks File browser problem seg fault with bat.
645 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
646 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
649 kes Implement PopUp YES/NO dialog for bat.
651 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
653 kes Correct RunScript to terminate job in FD on failure.
654 kes Change abort_on_error and AbortJobOnError to fail_on_error
655 and FailJobOnError in RunScripts.
656 kes Minor tweaks of code formating in RunScripts, principally to
657 avoid depassing 80 columns.
659 kes Eliminate one #ifdef Win32 in bsmtp
660 kes Implement grow tool to grow a file for testing very large databases.
661 kes Add big-vol-test to test Bacula seeking with > 5GB.
664 kes Modify find_next_volume() to return all values in Media record.
665 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
669 kes Update Release notes
671 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
672 Warning, in previous beta version, all media get from scratch keep their
675 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
676 This should fix bug #842. Made a note to look at removing the temp
677 files at the end of the install.
678 kes Add ability to mount and unmount a file device providing it is
679 marked as being removable and has the appropriate mount and unmount
680 commands defined in the Device resource. This fixes bug #830.
681 kes When applying a storage override, release all previous storage
682 definitions rather than just prepending the new storage.
683 This should prevent a good deal of confusion.
685 kes Implement ./configure search for qwt libraries.
687 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
688 Win32 FD. This should fix bug #893.
689 kes Remove an unnecessary beep in Win32 init code.
690 kes Update copyright dates in Win32 executable about boxes.
691 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
692 code with a BSD getopt.c and getopt.h.
693 kes Remove sched.h from the Win32 compat directory -- not used.
694 kes Remove the Exit menu item from the Win32 tray monitor. If you really
695 need to shut it down, do it through the services panel or the command
697 kes Remove some inappropriate Bacula FSFE copyrights.
698 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
699 kes Fix regress config non-portable test as pointed out by
700 Florian Heigl <florian.heigl@gmail.com>
701 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
702 as pointed out by Florian Heigl <florian.heigl@gmail.com>
704 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
705 Reported by Frank Sweetser.
709 kes Fix client-only build.
710 kes Integrate client-only fixes for bsys (initgroups) and conio from
711 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
712 kes Make arguments to get_scratch_volume() in same order as other
714 kes Rework the prune_volumes() subroutine so that after purging and
715 no volume found in desired pool, it will check for a scratch
716 volume. This prevents recycling the whole scratch pool.
717 kes Add code to status storage to print boffset_t (largefile support).
719 kes Move qwt (Graphics libarary for Qt4) to depkgs.
720 kes You now need a --with-qwt=<dir> to be able to build bat.
721 kes Update src/win32/cats/bacula_cats.def to include the new
722 db_get_query_dbids() call on Win32.
724 kes Correct a problem when selecting a scratch volume and moving
725 it to another pool that lost some columns.
726 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
727 kes Enhance Autochanger error messages to include Volume and device name.
728 kes Rework prune_volumes() code to take account of InChanger flag,
729 and to handle recycling volumes going to the Scratch pool and
730 current pool because the RecyclePool directive.
731 kes Implement a better and more efficient db_get_query_dbids() to
732 handle creating and passing back a list of DBIds.
736 kes Start work on new more efficient DBId subroutine. First use
737 will be for recycling volume to Scratch inchanger.
738 kes Increase number of JobIds in pruning from 1000 to 10000.
739 This to be replaced by above routine.
740 kes Begin implementation of building Qt4 on Win32.
741 kes Correct typo in fix I added for bad TLS shutdown.
742 kes Pull 2.0.3 patches into patches directory.
743 kes Update Release notes. Include qt-console in line count.
744 kes Update Projects file.
746 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
747 bug in migration code where a job that spanned two volumes
750 kes Implement new BST_DESPOOLING blocked state. Change from locking
751 during despooling in SD to blocking. This means that other threads
752 can work with the device structure, in particular the reservations
753 system while despooling.
755 kes Fix return in reservation message queue that missed clearing
756 the jcr lock (implemented 26Jun07 below).
757 kes Rename a number of dev methods to make locking function names
759 kes Document locking in lock.c. Move lock structures to new file
762 kes Move reservations message lock to lock jcr only this
764 kes Move main SD locking code into lock.c (new file).
765 kes Update Win32 build to include lock.c
769 kes Dirk committed the qwt library code for drawing graphs in bat.
770 kes Tweak install of qwt so that it is integrated with ./configure.
772 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
773 out by Eric (my typo).
774 ebl Fix configure.in to get batch mode enable
775 kes Return correct string from authenticate.cpp in bat when connecting
777 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
778 spurious line drops when using TLS.
779 kes Do not file reparse points when restoring a file that already
782 kes Implement Windows reparse points -- similar to directories, but
783 we do not descend into it. This is a first cut. They seem to
784 be backed up, but restore is not yet tested.
785 kes Remove restore_blocking in tls code when shutting a socket to leave
786 it in blocking mode. Hopefully this will fix the encryption bug
787 reported by Frank Sweetser.
788 kes When opening a file for backup, tell the OS that we are going to
789 read it sequentially -- optimization.
790 kes Change variable names in authenticate_director() to not conflict
791 with member names in bat. Caused great confusion with compiler,
794 kes Queue openssl error messages in case of comm problem.
795 kes Do shutdown() call if socket terminated.
796 kes Remove some duplicated code in tls.c
797 kes Move more of the bsock member variables into private and access
799 kes Add Frank Sweetser's tls-test to the regression suite.
801 kes Add Swedish sv.po file
803 kes Don't print clock skew message in FD if less than 3 seconds diff.
804 kes Add a bit of VSS info to status client.
805 kes Implement a first cut of Vista VSS, using Win2003 code.
809 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
810 loaded tape but uses first drive).
811 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
812 This was indeed a Win32 issue.
814 kes Simplify search of autochanger for in-use Volume.
815 kes Fix exit condition of check for in-use volume. kes Remove
816 inappropriate my_postgresql_free_result() in db_close()
818 kes Fix bad return in FD when encryption signature not found.
819 Probably caused a crash.
820 kes Inhibit missing encryption signature error messages for
821 file types where no signature computed.
822 kes Correct inverted check on autochanger in reservation system.
823 kes Tweak debug code in autochanger reservation.
825 kes Add some additional locking in the cats directory in subroutines
826 that modify packet variables called from batch insert.
827 kes Rework how dcrs are allocated. new_dcr() can now be called
828 with an existing pointer, and it will simply clean it up.
829 This allows the reservation system to test various different
830 devices, and will permit easy device changes.
831 kes A bunch of changes all over to handle new new_dcr() calling
833 kes Work more on the Volume management in the SD. Remember Volumes
834 for tape drives and for autochangers (even virtual disk changers).
835 kes When looking at the Volume list to reserve a drive, handle
836 autochanger names correctly by interating through the changer
837 devices. Also call the Director to see if a Volume is suitable
839 kes Fix some bugs in bscan. Make sure all media records are written.
840 Make sure that valid JobMedia records are written for disk files.
841 Previously they were completely wrong.
842 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
843 that the URLs don't change and so that the developers will all
844 work off the same copy. Rebuild from scrach.
845 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
849 kes Fix seg fault in FD from incorrect digest size.
850 kes Fix argument to non-OpenSSL crypto.c subroutine.
854 kes Remove a few malloc()s from the encryption code.
855 kes Use the class calls to bsock in filed/backup.c and restore.c in
856 place of the old bnet_xxx code.
857 kes Implement code that does an on the fly calculation of the
858 signing digest during restore of encrypted files. It makes
859 a best guess at the algorithm, and if it is not correct, will
860 then revert to the old code which reads the file after it is
862 kes Implement at least one missing crypto stream in stream_to_ascii()
863 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
864 #877 where a reload with bad syntax causes Dir to exit.
866 Cut: 2.1.14 beta (not released)
868 kes Do not free a volume on a tape drive until another volume is
869 mounted and read, or the autochanger unloads the volume.
870 This should help the SD re-use volumes that are already mounted,
871 and should fix bug #886.
872 kes Apply patch from user brettedgar that allows gnome2-console include
873 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
874 kes Apply patch from Lucien Weller that fixes day of week calculation
875 because of DST flag problem. Fixes bug #887.
877 kes Move find_next_appendable_volume() to after acquiring a valid device
878 in reserve.c. This fixes bug #864 -- confirmed by reporter.
880 kes Unable to reproduce bug 872. However added additional testing for
882 kes Bug #874 resolved by documenting SQLite limitations.
883 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
884 kes Bug #881 resolved by removing typo in mtx-changer script.
885 kes Made Frank Sweetser's wiki the official Bacula wiki with his
886 approval. Added a link to the wiki on the web page, and implemented
887 a backup from http://paramount.ind.wpi.edu
889 kes Fix update allfrompool to pass pool name.
891 kes Convert to pure GPL v2 license.
892 kes Fix sscanf problems reported by Peter Buschman that caused
893 a bus error on Solaris.
894 kes Rework (simplify) the select prompt in bat.
895 kes Move get_jobid_from_tid() into lib and create a
897 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
898 should definitely fix the problem of lost error messages in the
900 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
901 kes Eliminate tcpd.h from the project. Enclose the #include from the
902 library with extern C ...
903 kes Add print of signal name when a signal is trapped.
907 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
909 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
910 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
911 makes SQLit3 run 30 times faster, though a bit less safe.
912 kes Implement --with-batch-insert in configure and detection of thread
913 safe libraries. It is on by default, but turned off if no thread
914 safe library (e.g. SQLite 2) is available.
916 kes Fix Bacula PostgreSQL buffer overruns.
917 kes Do better checking for NULL results returned from PostgreSQL;
918 implement retry for failed queries; clear results buffer after
919 failed query. Hopefully this will correct the PostgreSQL failures.
921 kes Implement algorithm to handle only one appendable volume with
922 Prefer Mounted Volumes = no.
923 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
924 returned from a query.
925 kes Make volume lock recursive.
926 kes Implement an additional volume reservation algorithm that
927 starts by considering all reserved volumes then uses the
928 old brute force algorithm of searching the resources to
929 find a suitable device.
930 kes Add new reservations debug code and refine the old code.
931 kes Update the win32/dll/bacula.defs file.
933 kes Tweak reservations algorithm to permit a few more cases, i.e.
934 volume reserved, but on different drive, ...
935 kes Enhance SD status to include Pool and Media Type for drive in a
936 more readable format (a bit longer).
937 kes Fix PostgreSQL double free.
939 kes Minor refactoring of restore decryption code.
940 kes Add code to smartall.c to detect double free of a buffer.
942 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
943 so that bsmtp will create a correct email address (mailbox only).
944 kes Modify 'memory' command so that the buffers are listed as 'In use'
945 to avoid confusion with Orphaned buffers.
946 kes I reworked the OpenSSL include/lib flags to be handled in
947 the standard Bacula way, which should fix bug #863 concerning
948 non-standard OpenSSL libraries.
950 kes Implement Help Browser window for bat.
951 kes Fix reload bug that reset StorageId to zero.
953 kes Fix TLS #ifdefing when TLS turned off.
954 kes Ensure that when labelling a tape with Slot=0 that InChanger
956 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
958 kes Add StartTime to final uar_sel_jobid_temp query so that we can
959 add DISTINCT (required by PostgreSQL).
960 kes Implement BSOCK authenticate_director() method. Eventually will
961 authenicate all daemons.
962 kes Move several more functions into the BSOCK class.
964 kes Add code to tell the OS that we no longer need a cached
965 file that we were reading. In findlib/bfile.c. Also,
966 only cache files that we are reading. Thanks to
967 Tobias Oetiker <tobi@oetiker.ch> for the idea.
968 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
969 kes Implement script to automatically generate cats and dll .def
971 kes Update README.mingw32 to include new .def file generation.
972 kes Correct typo in UTF-8 error message as reported by:
973 jhernandez <julianhernandez@gmail.com>
974 kes Add additional sm_check() code on debug level 1.
975 kes Set default debug level to 1.
976 kes Trap SIGABRT in attempt to get traceback.
978 kes Reduce bat connect timeout from 30 to 15 seconds.
979 kes More restructuring and implementing BSOCK class in place of
981 kes Remove a few unnecessary malloc() tests in crypto code.
982 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
983 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
984 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
986 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
988 kes Fix Verify InitCatalog. The attributes were not pointing to the
989 correct saved location.
990 kes Implement message callback so that GUI is sure to get all
991 daemon messages. Currently displayed in a dialog in bat.
992 kes Ignore SIGUSR2 (Bacula timer) in bat.
993 kes Apply regress patch from bug #859 to allow regress to work
994 with Solaris compiler.
996 kes Begin adding TLS support to bat.
997 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
998 clean up lex.c and make it more readable.
1000 kes Move more bnet functions into the BSOCK class.
1001 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1002 kes Complete change of berrno strerror() method to bstrerror()
1004 Release: 2.1.10 beta
1006 kes Cleanup incorrect email addresses in bsmtp.
1007 kes Make bat display initial messages rather than discard them.
1009 kes First cut of adding .mod to the run command.
1010 kes Implement auto display of messages in bat.
1011 kes Enhanced preferences to allow all Bacula output to be
1014 kes Try to make bsmtp date routines more generic.
1015 kes Fixed bug #856 autochanger documentation.
1016 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1017 kes Add new cats entry point so Win32 builds.
1019 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1021 kes Do better checking for the MySQL 64 bit libraries looking for both
1022 .a and .so libraries.
1023 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1024 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1025 kes Require the thread safe version of MySQL during configure. Thanks
1026 to Andre Noll for pointing this out.
1027 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1028 continuing in migration code.
1029 kes Apply implementation of tray-monitor font derived from gnome-console
1030 submitted by Andreas Piesk <a.piesk@gmx.net>
1032 kes Eliminate important memory loss in SQLite
1033 kes Fixed the batch insert MySQL thread specific data that was not
1034 being freed. See cats/mysql.c:db_thread_cleanup().
1035 kes Fix restore before command.
1036 kes Convert old hdr.name to name() in a few places.
1037 kes Implement update jobid command.
1038 kes Return all time_t dates in db_get_job_record()
1039 kes Stop watchdog in SD earlier.
1040 kes Put Pool just after Storage in please mount message.
1041 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1044 kes Update the po files.
1045 kes Fix Verify InitCatalog by making it cache attributes.
1047 kes Change name bacula-bat to bat for man 1 page to correspond to
1049 kes Check for client and store NULL pointers in status command. This
1051 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1052 kes Fix sign extended editing of %p.
1053 kes Clean out a little old #ifdefing in cats/mysql.c
1055 kes If time diff between DIR and FD is more than 600 seconds convert
1056 INFO message to WARNING.
1057 kes Implement heap size display in status for all daemons.
1058 kes Attempt to fix MySQL db open memory loss (not successfull).
1059 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1060 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1061 Query. This looks like a MySQL but but by doing extra releases,
1062 the memory goes away. This should fix bug #847.
1064 kes When backup fails, cancel SD before waiting for sd termination.
1065 kes If SD is waiting for FD to connect during cancel, wake up the
1067 kes Fix fsf code so that errno is correctly reported.
1068 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1070 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1071 so that Bacula doesn't later stumble into a seg fault.
1072 kes Use the term Restore Client in the restore Job report.
1073 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1074 the original job's FileSetId.
1075 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1076 spooling in migration jobs. Not yet tested.
1077 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1078 reading conf file from a pipe. However, do it with open_bpipe()
1079 rather than popen. Not yet tested.
1081 kes Fix an ugly bug where the VolCatBytes were getting updated
1083 kes Implement bconsole memory command that prints current memory
1084 usage, plus smartalloc dump.
1085 kes Clarify some error messages in backup, admin, and migrate.
1086 kes Shrink label dialog to smaller size.
1087 kes Invert Cancel OK buttons on restore to be OK Cancel.
1088 kes More strerror() to bstrerror() conversions.
1090 kes Start implementing bstrerror() in place of strerror().
1091 kes Stripping path -- seems to work.
1093 kes Prevent door and port files from being restored (mostly
1095 kes Free an unreleased buffer in compat code.
1096 kes Change console Job name from *Console* to -Console- to eliminate
1097 Win32 filename problems. Put Win32 path separator when creating
1098 Console file. This fixes bug #846.
1099 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1101 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1103 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1104 to force Win32 error message.
1106 kes First cut strip path. The data should be passed to the FD,
1107 but nothing is done with it yet.
1108 kes Enhance the digest and signature routines in the crypto
1109 library to accept a JCR and to use it to print error messages
1110 so that they will go in the Job report rather than the daemon's
1112 kes Simplify some of the verify signature code.
1113 kes Simplify a few of the alternative returns in the signature
1116 ebl Use only POSIX regex instead of GNU regex in breg.c for
1117 File relocation. It fix broken freebsd compilation.
1118 kes Convert all other Dir files to use new ua class message
1120 kes Tentative fix for missing digest signature in bug 807.
1121 kes Correct handle problem in new win32_ftruncate routine.
1122 kes Convert ua_purge.c and ua_update.c to use new ua class
1123 message routines for bat.
1125 kes Correct incorrect installation of LICENSE in Win32 installer.
1126 kes Display LICENSE at the beginning of the Win32 install.
1127 kes Attempt to correct the need for the png files to be installed
1129 kes Reapply my bat.conf install script in qt-console. I think I
1130 editted bat.pro instead of bat.pro.in and it was lost.
1131 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1132 the /var/lock/subsys for subsysdir. Also corrects typos in the
1135 kes First cut update job.
1136 kes Correct configure to include qmake of src/qt-console directory.
1138 kes Make restore job yes/mod/no print in one command so GUI works.
1139 kes First cut implementing backup and restore client.
1140 kes Correct editing in Verify output that caused a seg fault.
1142 kes Insure that bat.conf is not overwritten during installation.
1143 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1144 while I was implementing migration in March 2006 !
1146 ebl Cleanup file relocation, using char *RegexWhere instead of
1147 char *where + bool where_use_regexp
1148 kes Update some manpages and add bat manpage.
1149 kes Make a first cut at converting bacula.spec.in for bwx-console
1151 kes Apply patch from John Goerzen to add hostname as fourth argument
1152 to make_catalog_backup script.
1153 kes Fix typos I introduced into bsmtp.c
1154 kes Make pm_strxxx() routines handle input of NULL pointer. This
1155 is to protect from NULL pointers returned from SQL databases.
1156 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1157 kes Add more debug to FIFO code -- fix fifo regression test.
1159 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1160 kes Add thread timer to bnet_connect() to break from OS if wait time
1163 kes Update Win32 build to include new files, new symbols, and
1165 kes Implement socket level heartbeat (tcp_keepidle)
1166 ebl Commit File relocation patch
1167 kes Make bat have 'make install' target.
1168 kes Warn during install if old gnome-console binary found.
1169 kes Warn during install if old wx-console binary found.
1170 kes Add -8 option to bsmtp command line to add content type utf-8.
1171 Fixes bug #809. (Character coding problem in bsmtp).
1172 kes If < is found in target (from, to, cc) then do not enclose the
1173 target in < > in bsmtp. Fixes bug #772 (malformed address).
1174 kes When printing certain items in dbcheck, stop after 300000.
1175 Fixes bug #822. (dbcheck loops).
1176 kes Incorrect status in Dir after waiting for mount with poll set.
1179 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1181 kes Print waiting to reserve a device every 5 mins.
1183 kes Don't call close_part in label.c if tape and relabel.
1184 kes Don't free volume if busy in close() -- should help with
1186 ebl Fix #824 RunScript bug (After script could be execute twice)
1187 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1188 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1189 Add a regression script to test RunScript
1191 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1194 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1195 deprecated. No additional bugs will be fixed, and they will be dropped
1196 in a future release (probably 2.4.0).
1197 kes Change name of wx-console to bwx-console to make it more Bacula
1199 kes Change the name of gnome-console to bgnome-console to make it
1202 kes Some time in March, a Feature Request with patch from Jorj Bauer
1203 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1205 The ability for the director to validate a Client (FD) CN against
1206 an arbitrary set of patterns rather than the hostname, with
1207 A new 'TLS Allowed CN' set of directives which are implemented
1208 in the Client resource. Then pattern matching is used in place
1209 of hostname matching against the Certificate's CN. As an example, we
1210 have certificates which (a) use a local CA, and (b) have a CN of the
1212 kes Add new/changed entry points to Win32 build
1213 kes Create unaccepted-projects for projects that are not accepted.
1214 kes Simplify locking in the reservations system.
1215 kes Add more debug code in reservations.
1216 kes Make sure error condition on reserving a volume is handled correctly.
1217 kes Correct handling of volume_in_use.
1218 kes Correct handling of initializing a device.
1219 kes Move handling of broadcasting releasing a device into release_device().
1220 kes Correct attaching dcr to dev so that it is only done if device
1221 is properly initiated.
1223 kes Locking debug level tweaks in SD.
1224 kes Tweak new Volume code.
1226 kes Add exec external-command [wait-seconds] to bconsole. This
1227 executes the external-command. Note! normally external-command
1228 should be enclosed in double quotes.
1229 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1230 it should normally be off in a production system.
1232 kes Implement die command for SD so that we can force it to dump.
1233 kes Implement SD lock debug code.
1234 kes Implement new algorithm for keeping Volume list in SD. It
1235 is now owned by the device.
1237 kes Implement new code for freeing in use volumes that should
1238 resolve if not all, some of the problems of multiple drive
1239 tape conflicts described in bug 801.
1241 kes Fix gui/bacula-web/images files in svn.
1242 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1244 ebl Fix a bug in batch mode (in string escape)
1245 kes Correct migration prune SQL typo that crept in in a
1246 recent 2.1.x change.
1248 kes Move bnet_despool() into class in bsock.c
1249 kes Modify job report to include director name and Build OS.
1250 kes Move drop root privilege and check_catalog() before fork.
1251 kes Add update database scripts (version 9 to 10) to updatedb directory.
1253 ebl Check size and age of each file after its backup to see if
1254 it has changed during backup, if 'checkfilechanges' is set.
1255 The FD will do an extra check (stat(2)) after
1256 each file backup. mtime, ctime and size are compared with
1257 'before backup' information. If time or size mismatch, an
1258 error message will be generated. You must upgrade FD to use it.
1260 kes Make database name and user configurable
1261 --with-db-name=xxx --with-db-user=xxx
1262 kes Add back database type to message.c for debugging.
1264 kes Implement dir_sql() which issues an SQL query.
1265 kes Modify bat medialist to use dir_sql() and do some minor C++
1266 formatting as well as eliminating a number of pointers, simplifing
1269 kes Fix some of the mtx-changer grep commands for tape label readers.
1270 kes Convert a number of bsendmsg into the appropriate send/warning/error
1271 message class calls.
1272 kes Suppress the using database message in the .sql command.
1273 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1275 kes Add context menu for floating a window.
1276 kes Some minor cleanup and name changes in qt-console
1277 kes Add doing mt setblk 0 in Win32 mtx-changer.
1278 kes Apply Martin's bug fix to move definition of ENODATA for
1280 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1281 sqlite2 and sqlite3.
1283 kes More pruning cleanup.
1284 kes Turn on wait_for_drive by default in mtx-changer.
1285 kes Turn on Batch insert code by default as it now passes regression.
1286 kes Add ./configure --enable-bat to enable building of Bat.
1287 No install yet though.
1289 kes Implement a new .sql command for bat.
1290 kes Implement code to turn off pruning in obtaining the next volume.
1291 Pruning is turned off for the status dir command, but turned on
1292 for SD requests and for the list nextvolume command.
1294 kes Correct Qmsg() that was not updated correctly when committing a
1295 previous change (probably the recent TLS patch).
1297 kes Write new subroutine is_volume_purged() that explicitly checks
1298 if the Volume is purged, and if so marks it as such. This should
1299 resolve problems reported about needing to mount twice to recycle
1301 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1302 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1303 amount of duplicated code.
1304 kes Do volume pruning only for the Media Type desired (reduces pruning time
1305 if multiple Media Types are in the same pool).
1306 kes Implement more detailed info in the Job report for the Bacula version
1308 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1310 ebl Add bbatch tool to bench database and insert mode.
1311 Fix sql quote stuff in batch mode
1312 Fix sql stuff for mysql
1314 kes Correct problems with am/pm scheduling. Fixes bug #808.
1315 kes Implement new prunning code that prunes up to 1000 jobs at
1316 the same time. The same technique can be applied to a number
1317 of other prune/purge subroutines.
1318 kes Add an insanity check when starting a new tape job to ensure
1319 that the tape position has not been changed. If so fail the
1321 kes Fix Win32 build for dlls to add the folllowing:
1322 src/lib/bsock.c -- new file with new entry points
1323 src/lib/dlist.c -- new entry points
1324 src/cats/sql_create.c -- new entry point
1325 src/cats/sql_cmds.c -- new DATA item exported
1327 ebl batch mode cleanup bscan-test is ok now.
1328 kes Implement SD code to check length of disk volume before appending.
1330 kes Correct return status on db_batch... routines.
1331 kes Add call to db_write_batch_file_records() to migration code.
1332 ebl Fix AfterJob timing
1333 kes Move the checking of the database in initializion of the Director
1334 to after we drop privileges. This avoids the need for both root
1335 and bacula access to the DB.
1336 kes Correct a misplaced variable definition in src/filed/backup.c
1337 kes Correct how the new batch insert db_create_attributes_record()
1338 uses the arguments. Caused a seg fault in bscan.
1339 kes Implement lock() and unlock() methods in DEVICE class.
1340 Implement block() and set_block(xx) methods in DEVICE class.
1341 kes Modify bnet_connect() so that it uses time() to check for the
1342 wait time expiring (on some OSes, some system calls may not
1343 return immediately).
1344 kes Modify Verify to obtain the previous JobId when it is actually
1345 running rather than at schedule time (as it was in 1.38.x).
1346 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1348 kes When checking pid in pid file, continue running if the pid is
1349 the same as ours. This occurs on IRIX after a system crash.
1352 kes Extend new GUI API.
1353 kes Make the ua structure a class, and implement send_msg(),
1354 error_msg(), warning_msg(), and info_msg().
1356 kes Apply fix from for building wx-console on the Mac from
1358 kes Implement new select mechanism for GUI programs.
1359 kes Reorganize initialization of stackedWidgets in bat.
1361 kes Add updated nagios plugin supplied by Christian Masopust.
1363 kes More bat implementation.
1364 kes File migrate bug with Pool Occupancy using mediaid instead
1365 of jobids. Fixes bug #795.
1366 kes Fix orphaned buffers in filed backup and verify due to
1367 crypto buffers not freed during errors. Fixes bug #789.
1368 kes Extend new GUI api code to tree commands.
1369 kes Ensure that tree and dot commands check console ACLs.
1370 kes Permit marking directory with trailing slash.
1371 kes Allow 20 console connections (instead of only 10).
1373 kes Add smartctl call to bacula-sd.conf as an example of getting
1376 kes Modify jobq.c to let simultaneous restore jobs run. This may
1377 cause them to fail if they cannot get a drive.
1378 kes Add Client Connect Wait to Storage daemon to permit users to
1379 modify the time the SD waits for a FD connection.
1381 kes Correct virtual changer check which was backwards. This caused
1382 volumes to be unloaded into slots already occupied.
1384 kes Apply Command ACL filter to JobId list in restore command.
1385 kes Correct typeo in var.c patch.
1387 kes Don't let Bacula prune File or Job records for the current Job.
1388 kes Fix variable substitution pad + inc bug reported (with patch)
1391 kes Correct SQLite log table index as reported by Luca Berra.
1393 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1395 kes Begin implementing new comm signals for API.
1396 kes Fix a few places in lib/message.c where the open fd may
1398 kes Continue implementing lib/bsock.c (real class). Make jcr,
1399 who, host, and port private. There are new methods to access
1400 them for non-class use. This required touching a number of files.
1402 kes Add LANG=C to autoconf/randpass so it works with languages other
1403 than English. Fixes bug #788.
1405 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1407 You will not be able to generate Include/Exclude list any more.
1408 It will be fixed soon.
1409 If you want to use this, you can apply
1410 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1412 kes Restore of sockets created false error messages because Bacula
1413 no longer restores sockets, but the code was still trying to
1414 set the attributes on a non-existent file. Reported by a user.
1415 ebl finish RecyclePool feature
1416 Media will takes Pool.RecyclePool
1417 when moving from Scratch to a Pool or when user will do
1418 update volume=xxx frompool
1419 To use it, add RecyclePool = aPool to your Pool resource
1422 RecyclePool = Scratch
1426 kes Expand new BSOCK class adding signal() and new BNET signals.
1427 kes Begin enhancing the dot commands adding a new API function
1428 that returns more information and will make it easier
1429 to interface to the Director from a program.
1431 kes Make DEVICE fd private. Its new name is m_fd, and can be
1432 obtained with dev->fd() outside the class. This is the
1433 first of many DEVICE members to be made private.
1434 kes Implement Michael Renner's idea on having a virtual disk
1435 changer. I made some minor modifications (e.g. I did not
1436 implement the Virtual Changer directive, but simply set
1437 the Changer Command to an empty string.
1439 kes Implement a BSOCK send() method that writes the whole record
1440 in a single write() request rather than in two.
1441 ebl add update volume=xxx recyclepool=yyyy
1442 volume takes recyclepool from pool when using update volume=xxx from pool
1444 kes Fix encryption deblocking bug, which caused some restored files
1445 to be truncated. This fixes bug #763.
1446 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1447 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1449 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1450 ebl Use btime_t instead of uint64_t in media patch.
1452 kes Optimize the use of the database a bit in the Status dir command.
1453 Only open it when needed, ensure that if any previous database
1454 was opened, it is closed.
1456 kes Correct VolCatBytes bug from media patch.
1457 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1458 in the case of orphaned records.
1459 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1460 and File records in 300K chunks to be more efficient. This
1461 idea came from Juan Luis Frances (if I remember right).
1462 kes Apply Eric's scratch patch that moves a purged Volume to
1463 the RecyclePool. Question: how is RecyclePool set? what
1464 happens to the ScratchPool?
1465 kes Apply Eric's media patch that collects read/write media
1466 times as well as byte counts. This patch requires a
1467 simultaneous upgrade of the DIR and SD. Note, there
1468 should be some way to turn off timing. I'm not sure
1469 times are in Bacula units.
1470 kes Apply Eric's batch-insert patch.
1472 kes Update projects list.
1474 kes Implement Include/Exclude file lists in FD as dlists using
1475 the new dlistString class. This permits efficiently having
1476 large include/exclude lists and completes project Item 25.
1477 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1478 console is authorized to cancel the job. This fixes bug
1480 kes Modify SD so that the VolCatJobs medium record is updated
1481 at the beginning of a Job rather than the end. This
1482 fixes bug #775 where exceeding MaxVolJobs caused jobs
1484 kes Added a mutex around getting and setting Volume information
1485 so that multiple simultaneous jobs will single thread.
1487 Switch to using Subversion
1488 kes Remove src/pygtk-console/ from configure
1490 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1491 plus the entrypoints.
1492 kes Apply patch supplied that corrects debug print
1493 in canceling jobs for max run time. Supplied as
1494 part of bug #621, which was previously fixed.
1496 kes Test on job_canceled() and sd_msg_thread_done inside
1497 loop starting the message thread to avoid a race condition.
1499 kes Remove rl_catch_signal from console.c as it conflicted
1500 with the header definition. Fixes bug #765.
1501 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1503 kes Clarify some stored/acquire messages to indicate if the
1504 problem is with read or append.
1506 kes Fix memory leak with storage ids in cats/sql_get.c
1507 kes Terminate watchdog earlier to avoid reference to released
1508 memory -- reported by Jason Austin.
1509 kes Move closing the database from jobq.c to the director daemon
1510 termination routine. This fixes memory leaks for shadow jobs
1511 (i.e. migration jobs).
1512 kes Free up the unique jobid chain items in migrate.c. This fixes
1513 a memory leak problem.
1514 kes Convert some ugly looking for statements to use foreach_alist
1515 in findlib/find.c. This will facilitate converting the structures
1516 to use dlist (for large include/exclude lists).
1517 kes Fix a bug in the btree.c and btree.h routines, then rename them
1518 rblist and add them to be built in src/lib. Include some new
1519 methods written by Rudolf Cejka that make the code more readable
1520 (hides some of the ugly casting).
1521 kes Add set_next() and set_prev() methods which make the code much more
1522 readable. Also add a new dlistString class that facilitates storing
1523 strings in dlists. To be used in the large include/exclude lists.
1524 kes Make some trivial modifications to lib/tree.h that use rblist
1525 rather than dlist for storing the tree links. This was suggested
1526 by Rudolf Cejka. The result of this is that the restore tree now
1527 uses red-black binary trees rather than simple linked lists. This
1528 should give rather dramatic speed improvements for directories
1529 contining large numbers of directories/files (more than 10000).
1531 kes Fix maxruntime bug #621.
1533 ebl Implement the include JobID in spool file name project.
1534 kes Reorder projects file in order determined by Jan 2007 vote.
1535 kes Implement item #12 on project list -- quick release of FD by
1537 kes Fix open of SQLite3 db where user does not have write permission
1538 so that DIR does not crash. Fixes bug #761.
1540 kes Add back missing @ in Win32 Makefile.
1541 kes Change 'Device not configured to autolabel' from INFO
1543 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1544 which should restart an indefinite # of times.
1545 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1546 other DIR specifications.
1548 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1549 Fix path quoting in SQLite scripts.
1550 Fix problems with SHGetFolderPath.
1552 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1554 kes Fix Job restart on error bug that promotes an Inc to a Full
1555 backup. This should fix bug #755.
1556 kes Add qt-console and first cut of code.
1560 kes Fix Bacula->Documentation link on Win32 to point to index.html
1561 instead of bacula.html. Fixed bug #750.
1562 kes Return JobId in db_get_job_record() when JobId==0. This should
1564 kes Do not release source pointers when restarting a failed job.
1566 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1567 This *should* fix bug #747.
1568 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1571 kes Modify USTORE constructor to set an empty store_source string,
1572 and don't copy the store_source string in a cancel. Hopefully
1573 this will fix Arno's seg fault, bug #744.
1574 kes Add back code to disable conio in configure. Fixes bug #743.
1575 kes Correct the Options scanner in the FD to correctly handle
1576 SHA1 option, which was eating the next option. Reported by
1578 kes Add code to indicate when the SD is spooling, spool wait, and
1579 despooling as requested by Alan Brown.
1581 Version 2.0.0 released: 4 January 2007