1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Get correct slot when auto unloading a device.
30 kes Fix multiple media restore.
31 kes Make DEVICE Slot private and access it via a method.
32 Allows better control over when it is set and cleared.
33 kes Fix possible seg fault if SQL error.
35 kes Add Martin's fixes to argument scanning for the estimate
36 command. This fixes bug #1093.
37 kes Add debug code to SD.
38 kes Fix renaming a Volume, which used the wrong Volume name.
40 kes If operator has rewind tape, print warning, release tape and
41 try once more. If tape is positioned somewhere, something went
42 wrong, so mark the tape in error and try once more. Previously
43 this error was fatal, now it produces an error message.
44 kes Ensure correct volume name displayed during restore
45 kes Ensure that Volume is mounted for restore.
47 kes Fix a few more Coverity reported problems.
49 kes Apply Allan Black's status dir job count patch.
50 ebl Add information about IMPORT/EXPORT slots in mtx-script.
51 kes Enhance a couple of SD debug messages.
52 kes Tweak unload flag setting and ensure it is set during swap.
54 ebl Fix #1091 about bad output in estimate command.
56 kes Modify autochanger locking to attempt to avoid race
58 kes Make sure device not busy before doing label command.
59 kes Display open() errors except when polling. Previously too
60 many were suppressed. This should fix bug #1070.
61 kes Fix Win32 reparse points. Bacula will not recurse into any
62 reparse point directory, including mount points, unless the
63 directory is explicitly mentioned at the top level (same as
64 with Unix). A file that is linked to another file will be
65 backed up -- much as Unix does for hardlinked files.
68 kes Remove double quotes from ChangeLog and ReleaseNotes
69 kes Remove StorageId test when pruning and recycling (Eric's changes).
70 kes Remove old form of locking when getting volumes -- causes deadlock.
71 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
72 the name unique and to eliminate compile time error.
73 kes Add accurate.o to Win32 FD Makefile
75 kes Fix cats dll build on Win32 after db_update_job_end_record
76 calling sequence change.
77 ebl Switch to tokyo dbm instead of htable in accurate code
78 ebl Include tokyo dbm to bacula source tree
80 kes Fix buffer overruns detected by Coverity.
82 kes Tweak joblog display.
84 kes Implement --without-qwt
85 kes Fix layout of restore tree dialog
86 kes Add configure bat QWT libraries, so that bat can be built
87 with or without the QWT libaries.
89 ebl Add dummy tape driver for regression tests.
90 kes Make sure we unload the right slot when swapping.
92 kes Add debug times, reduce size of two-pool-changer test
94 ebl Tweak autoconf scripts for faketape
96 kes Improve SD reserve debug code.
97 kes Testing an improvement to free up volumes no longer in use.
99 kes Rework SD acquire for read to handle autochanger Volume
101 kes Implement regression that explicitly tests swapping a Volume
102 from one drive to another.
103 kes Enhance disk-changer to detect most error conditions.
104 kes Fix SD code so that it properly swaps a Volume between drives.
105 This fixes bug #1083.
107 kes Apply libdbi patch from Joao Freitas for regress and for
108 Bacula trunk. Regress now works with libdbi. Nice.
109 kes Apply .nobackup patch from bug #1077 submitted by
111 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
112 name into jobs cloned via the run directive.
114 kes Prevent a Volume that is being swapped from being freed from
115 the volume list. This will most likely fix, at least partially,
117 kes Fix strippath so that it does not get a buffer overrun and crash FD.
118 This fixes bug #1078.
119 kes Remove 50 millisec wait in SD that broke debugger.
120 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
121 that a job may run, counted from when the job was scheduled.
122 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
123 a job may block waiting for a resource, counted from when the job starts
124 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
125 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
126 that implements multiple commands per line in the console when using
127 readline. Modify the default to use a semicolon as the command separator.
129 ebl Fix SQL query in migration code.
130 ebl Make accurate mode with hash disk pass regression tests
132 ebl Implement first cut of accurate backup with hash disk.
134 kes Force unload of volume when wrong volume mounted in SD.
136 kes Fix bat seg fault at termination.
137 kes Add Bacula generated version to bat about box.
140 kes Experiment with allowing multiple read jobs.
141 kes Move final volume swapping code to DCR method and
142 call it from acquire_for_read().
143 kes When wrong volume is mounted during read, unload_autochanger.
145 kes Integrate the libdbi changes from Joao Henrique Freitas
147 kes Stop searching for Volumes in SD askdir if DIR returns the
148 same volume name twice in a row.
149 kes Close bat console windows first to eliminate error message
152 kes Tweak the swap Volume from one drive to another code so that
153 it now seems to work.
154 kes Resolve several problems with recycling that broke the new
155 code (these problems are in 2.2.9 as well).
156 kes Remove the volume lock when calling the sysop code.
157 kes Don't mark a reserved volume with no writers as unused otherwise
160 kes Rework class structures for VOLRES, DCR, and DEVICE to make
161 the method names a bit more logical, and for more logically
162 handling the responsibilities.
164 kes Remove redundant code in terminating the scheduler that just
165 causes a seg fault in many cases.
166 kes Cleanup releasing a volume and make it a DCR method.
167 kes Improve algorithm for detecting pre-reserved volume and
170 kes Tweak volume swapping code so it works.
171 kes Correct name overloading in mount.c
172 kes Replace released flag in VOLRES with reserved and add access
173 methods for the VOLRES class.
174 kes Prevent volume from being released while being swapped.
175 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
177 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
179 kes Refactor parts of stored/mount.c
181 ebl Add sanity checks for VolWriteTime and VolReadTime
182 ebl Take care of bad clock changes while computing VolWriteTime
183 and VolReadTime. This should fix or limit #1066
184 kes Correct error string numbers in dird/catreq.c
185 kes Restructure reserving, acquiring, and mounting volumes. Calls to
186 autochanger are deferred for mount.c -- simplifes the code.
188 kes Do not prune any running job. It just fails the job.
189 kes Lock the volumes when changing dev->reserved_device and marking
190 the volume unused otherwise the device can get reserved by
191 another job before the volume is released, thus blocking it.
193 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
194 kes Fix bug #1063, reuse of freed ptr in list nextvol.
195 kes Release regex compile buffer in filed/job.c
196 kes Add proper type of const char in sql_create.c
197 kes Turn off debug in daemon termination routines
198 kes Move free_volume_list() before devices are freed in stored.c
199 kes Fix reference to uninitalized stack variables in bregex.c.
200 This should correct bug #1067.
202 kes Fix possible seg fault in SD when freeing a volume entry.
204 kes Implement unload_dev() before swap device.
205 ebl Add statistics prunning with option and menu
206 kes Separate unload_dev() from unload_other_device() in autochanger.c
208 kes Apply patch from bug #1069 that corrects spurious error messages
209 when ACLs enabled on SGI but no ACL exists.
210 ebl Fix small segfault in bacula-sd when debug level is 500
211 kes Modify run_program() and run_program_full_output() to use
212 call by reference for the results string. This corrects a long
213 standing problem where the address of the string may be changed
214 in the subroutine but not in the calling program.
216 kes Re-enable code to remember last volume mounted on a non-tape
218 kes Add patch supplied in bug #1068 that fixes a SD crash when using
219 a Virtual autochanger.
220 kes Generate correct JobMedia records during spooling/despooling when
221 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
222 <tih@hamartun.priv.no> for excellent analysis and testing.
224 kes Tweak hash algorithm for htable using Martin Simmons idea
225 for doing a circular shift.
226 kes Remember what volume is in VTLs (previously turned off for
228 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
229 pointed out some problems in creating JobMedia records during
230 spooling with concurrent jobs. Fix the problem by updating the
231 start file position before despooling and generate a jobmedia
232 record at the end of despooling.
234 kes Fix handling of JobMedia records during spooling and when a
235 Volume is changed without actually writing data to the Volume.
237 kes Rework certain SD locking based on gdb tracebacks of deadlocks
238 sent by Eric. This code now uses only the volume_lock() rather
239 than the reservations lock when at EOM and acquiring a new
241 kes Ensure only one exit point in several subroutines.
243 kes Implement bsock code to permit locking. Use the new code in Verify
244 in the FD to prevent the heartbeat thread from disrupting the Verify
245 data sent to the Dir.
246 kes Modify SD locking to eliminate locking the reservations system from
247 outside the system. Use the volume lock when getting media data
248 and reserving a new volume at end of media.
249 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
250 when SD starts are not locked into place.
252 kes Fix error compiling runscript code on 64 bit machines.
253 kes Tweak Win32 mount point code.
254 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
255 cleared giving bad file estimate).
256 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
259 kes Keep Schedule run lists in order as suggested by
262 kes Implement autostart scripts for Debian.
263 ebl Implement upgrade catalog scripts.
265 ebl Apply jobstat patch for long term statistics. Have to implement
266 purge stats command and upgrade scripts.
267 kes Fix mtx-changer.in for broken Debian mt program.
269 kes Fix large number of JobMedia records reported by Eric Bollengier.
271 kes Apply doc fix from bug #1062.
272 kes Resolve crash and improper restore wx-console Win32 restore
273 GUI. Fixes bug #1065.
274 kes Update Win32 wxWidgets to latest version.
275 kes Attempt to do correct handling of Win32 mount points. Should
277 kes Fix Win32 FD backup/restore memory leak due to improper termination
278 of BackupRead/Write. This fixes bug# 1038.
280 ebl Reduce memory usage for accurate backup, working only with ctime
281 and mtime. (not all Lstat field)
282 About 40MB for my linux system (400.000 files)
284 kes Add dcr->reserved_volume flag that allows us to release a volume
285 even if it is not vol->released. This allows maxvol2 to work when
286 Volumes expire and we are already writing to the device (i.e. a
287 volume is pulled out from under us by another job terminating after
288 we reserve the drive).
290 ebl Permit multiple command/console per runscript definition.
291 RunScript { command = /bin/true ; command = /bin/false ... }
292 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
293 (restart an application) just after the VSS snapshot on windows.
294 kes Don't zap dcr values during release_volume() as they might
295 have the next Volume to be mounted.
296 kes Fix AIX prototype.
298 kes Second cut of drive switching during backup.
301 kes Update Win32 version of wxWidgets to most recent version.
302 kes Tweak Copy job details.
303 kes Rework dir_find_next_appendable_volume to make a bit more effort
304 to find a suitable volume before giving up.
306 kes Make ask_sysop_to_create... to return if waken from wait.
307 This helps get out of blocked conditions.
308 kes Experimental implementation of switch_device in reservations.
309 kes Implement FD version to allow easier protocol changes.
310 kes Add Plugin Options string -- not yet passed to FD.
311 kes Implement PluginOptions ACL.
313 kes Attempt to correct problems with restores with autochangers and
314 use counts going negative
315 kes Rework SD status command and implement API for bat. Implements
316 header, runing waitreservation, devices, volumes, spooling,
317 and terminated status keywords.
318 .status storage=xxx <keyword>
319 kes Clarify TLS error message by adding double quotes around name.
320 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
321 kes Pass jcr to tls routines so debug messages can be handled better.
322 kes Rework jobq resource allocation code, and possibly fix a bug
323 that caused reference counts to get out of sync.
325 kes Rename fd/dir plugin to use Bacula standard underscore.
326 kes Plugin work -- bring dir up to fd level.
327 kes Start implementation of VTL code
328 kes Fix Win32 build after adding new cats subroutine.
330 kes First cut at Duplicate Job implementation.
332 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
333 kes Start PluginOptions string, and refactor a bit of ua_run.c
334 ebl Apply Allan patch that permit to reset recyclepool.
336 kes Test patch -- possible fix or improvement for bug #1053
337 kes Refactor FD and SD status commands to permit new API code in
338 SD, and to fix Win32 build.
339 kes Win32 build is now working.
341 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
342 some ideas in patch from Scott Bailey.
343 kes Begin implementation of duplicate Job control.
344 kes Fix some of Win32 build after recent additions.
345 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
346 which causes the FD to detect whether or not the OS has the
347 honor no dump bit (*BSD systems), and if so, to skip backing up
348 any file with this bit set. The feature is enabled by setting
349 'honor no dump flag = yes' in the Options section of a FileSet.
351 kes Correct po warning message with datarootdir
352 kes Implement more code in dird.c to put configuration parsing in
353 a class rather than use globals.
354 kes Restructure SD status command for implementation of bat API
357 kes Suppress incorrect 'Will not descend from x into y' messages.
358 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
359 daemon globals used by parser.
360 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
362 kes Fix free of plugin_list when none exists.
364 ebl Apply accurate project patch.
366 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
367 on non-mempool object)
368 kes First cut of converting FD .status to work with bat API.
370 .status client=XXX header
371 .status client=XXX running
372 .status client=XXX terminated
373 kes Implement first cut of Copy Job.
374 kes Implement Catalog in Pool resource. It overrides catalog specified
375 in the Client resource.
377 kes Apply patch (with some difficulties) from Joao Henrique Freitas
378 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
380 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
381 ftruncate() actually works. In the case of some (cheap) NAS devices,
382 it does not, and so recycling NAS Volumes does not work. The code
383 simply unlink()s the file, then recreates it. This fixes bug #1011.
385 kes First incomplete cut of big malloc blocks for htable.
386 kes Tweak plugin code.
388 kes Plugin debug code + tweak a couple bat dialog layouts
390 kes Fix creating first JobMedia record during Migration to include
391 proper index. This caused slow restores of migrated jobs.
392 kes Temp fix to plugin name file_index.
393 kes Bacula backed up and restored a MySQL database.
395 kes Implement plugin restore.
396 kes Implement parsing of db_driver to give db_type index.
398 kes First cut of plugin restore code.
399 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
400 and do not strip paths on symbolic links.
401 kes Set catalog backup database and user name from values specified on
402 the ./configure line.
403 ebl Fix #1031 about wrong pool source information in job report.
406 kes Remove a redundant jcr argument to find_files, match_files, and
408 kes Implement '.status dir header|scheduled|running|terminated' that
409 prints the requested status section. With the exception of the
410 header, the other reports have fields separated by tabs (\t).
412 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
413 a resource embedded run command to find a since time if no explicit
414 since time was supplied on the command line.
415 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
416 that updates the state file at job termination time in addition to
417 when the daemon terminates.
419 kes First version where a plugin did a backup.
420 bpipe-fd.so created a backup file, wrote a test
421 string to it, and Bacua could restore this fabricated file.
423 kes Implement DB Driver = string for the DBI driver.
424 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
425 kes First cut of code for loading Win32 plugin dlls. Implement
426 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
427 and implement a dlfcn.h file based on opengroup's definitions of
430 kes First cut plugin directives.
432 kes Apply patch from bug #1049 to prevent stripping the path on a
434 kes Attempt to fix bug #1047 where stripping a path corrupts the
435 heap. Waiting for feedback.
436 kes Correct the Mount message not to suggest labeling a new tape
437 when doing a restore. Submitted by email by John Stoffel.
438 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
439 FD by using casting. Reported in bug #1042.
441 kes A bit of crypto cleanup. More later.
443 Release Version 2.2.8
445 kes Apply patch from Martin to correct bug #1040, bscan sets existing
447 kes Fixed important spelling error in doc -- bug #1045.
449 ebl Fix bextract to be able to extract non-portable Win32 data to
451 kes Move initialization of read/write res lock earlier in the code.
452 This fixes the crash with a null conf file. This fixes bug
454 kes Redefine CURES in lib/parse_conf to be URES and move it all
455 into lib/parse_conf.c -- this responds to bug #1042, but does
456 not fix it. The fix is not to compile with FORTIFY_SOURCE.
457 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
458 the trunk SVN. I don't think this was reported as a bug.
460 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
462 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
464 kes Add DataDespooling and DataCommitting status (committing is
465 the last despooling).
466 kes Finish implementation of new reservations code noted below.
468 kes Fix bsnprintf for float point numbers. I broke recently when
469 parameterizing some variables. This fixes bug #1036.
470 kes Undo recent reservations changes ... will apply them later
471 when they work better.
473 ebl Fixes #1034 which cause mysql to hang the connection after 8h
474 ebl Change default statistics target of filename.name and path.path
475 fields for PostgreSQL. This speeds lookup by indexes. Thanks
477 kes A few more tweaks to new reservation code. Make sure to clear
478 vol released flag when retaking volume. When reading label and
479 label is bad mark volume unused. When recycling, mark volume
480 unused so it can be renamed.
482 kes Fix reserve_volume() so it doesn't release a volume in use
483 (i.e. a volume entry not marked released). This should be
484 the last part needed to fix bug #1018.
486 kes Move Heartbeat documentation from Job to Director resource.
487 This fixes bug #1033.
489 kes Fix existing switch drive SD code to call autochanger to release
490 any old volume. This must be done to keep the autochanger from
491 releasing subsequently newly reserved volumes in doing a close().
492 This should fix bug #1018.
493 kes Fail if attempting to get console input in batch mode. This
494 should help fail RunScript console commands that are incomplete.
495 kes First cut implementing switch_drive() in SD (not actually called).
497 kes Implement first cut running console commands in a RunScript.
499 ebl Fixes bug #1028 where 'Selection Type' option was not usable
501 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
504 Release Version 2.2.7
506 kes Add new free_tls() entry point so that Win32 builds.
507 kes Fix compile warning in src/lib/util.c
508 kes Fix entry point for edit_job_codes() so that Win32 builds.
509 kes Fix seg fault Frank Sweetser reports in regression testing
510 on his systems. The problem was that the original author of
511 bsnprintf.c did not take into account the side effects of
512 using ++x in the argument to a #define.
513 kes Make SD protocol backward compatible with version 2.2.x.
515 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
516 because Bacula no longer restores sockets.
517 ebl Always use ignorecase fileset option on win32 FD.
519 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
520 that implements double quoting include names in conf files,
521 and also allows piping input by having the first character
522 be a vertical bar (|).
523 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
524 that implement %f in RunScripts to pass the FileSet name.
525 kes Skip leading | when lex input comes from a pipe as suggested
526 by Michael Stapelberg <michael@stapelberg.de>.
528 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
529 Nerijus Baliunas <nerijus@users.sourceforge.net>
531 kes Implement Plugin Directory and plugin events.
533 kes Implement a security enhancement: TLS authentication but no
534 encryption. Enabled by setting 'TLS Authentication = yes'.
535 Note when this is on, TLS encryption is turned OFF!
537 kes This patch corrects a problem where the maximum concurrent storage
538 jobs counter gets out of sync during restore jobs causing jobs to
539 'wait on max Storage jobs'. This patch fixes bug #1009.
541 kes This patch fixes bcopy so that it produces correct Volumes.
543 kes This patch eliminates spurious output to the console during a VerifyVolume
544 job that contains encrypted data. It fixes bug #1024.
546 kes This patch prevents the 'status dir' command from trying to use a scratch
547 volume and possibly moving it from one pool to another. This patch fixes
550 kes Add new include to postgresql.c suggested by Marc Cousins so
551 that it compiles correctly with pgre version 8.3.
553 kes Fix --archivedir addition to configure. Replace it with
554 --with-archivedir in configure.in This fixes the regression
556 kes This patch fixes bug #1012 where the job is canceled because
557 of Max Run Time exceeded when the job has not yet started.
559 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
560 one 'part' to write. Instead of each part being stored on disk,
561 written to DVD, then deleted from disk, all parts are written to disk,
562 and only the last is written and deleted from disk.
563 kes This patch fixes the status command to include the formating string for
564 JS_AttrInsterting. It fixes bug #1021.
565 kes This patch should fix the Mac OS X build problem on the latest
566 Darwin, where sys/types.h was not included correctly (apparently
567 due to a change in the Mac headers). The solution was to explicitly
568 ensure that it is defined for the ./configure.
569 This patch also has a rebuild of configure that includes the Debian
570 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
571 kes This patch should ensure that queued messages to the console are
572 displayed as soon as possible. It should fix bug 1007, but has been
573 reported not to work.
575 kes This patch fixes the infinite loop when trying to increase the
576 maximum number of volumes in a Pool during the add command.
577 This patch fixes bug #1008.
579 Release Version 2.2.6
581 db Remove extra data on estimate command in joblist for bat.
583 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
584 really change anything, but is the beginning of doing it *right*.
585 To do it completely right the LastWritten date must be passed to
586 the SD, but it is not yet done.
587 kes Minor tweaks to some bat restore SQL.
588 kes This patch fixes bug #1003 where putting the message output from
589 a Verify job into the catalog results in a recursive loop. The problem
590 seems to show up only with postgresql (to be verified).
591 kes Correct %x to %p in postgresql debug statement.
593 kes Fix bug #942 where lots of emails where generated when the heartbeat
594 interval was low and Bacula wanted a different tape from the one in
597 ebl Add new SD despooling attributes and Dir inserting attributes
598 job status codes in the catalog (Status table).
600 ebl Use qmake-qt4 instead of qmake when available (debian system).
602 kes Add a security warning to src/cats/make_catalog_backup.in indicating
603 that passing the password via the command line (arg 3) is insecure.
604 This responds to bug #990 (it doesn't fix it).
606 kes Set default debug_level to zero. This corrects bugs #991 and #993.
607 kes Fix a crash in bat when it cannot connect to the Director for example
608 if the Director is not running.
609 kes Remove redundant INDEX (JobId) from File table in the trunk.
611 kes Make explicit exception to GPL in LICENSE to permit linking
612 the Win32 FD with Microsoft VSS code.
613 kes Apply the Solaris package patch from
614 Masopust, Christian <christian.masopust@siemens.com>
615 kes Apply the patch to optionally add a timestamp in the debug output
616 submitted by Mariusz Czulada <manieq@wp.eu>.
618 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
619 backend (sql_strerror). Fixes bug #989
621 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
622 It applied with no problems.
623 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
625 kes Redirect stderror to stdin on mt status command in mtx-changer.in
626 since the status is returned on stderr on Solaris.
627 kes Activate Close button on tray-monitor window. This fixes
629 kes Check for NULL item in parse_conf.c before calling it. In the
630 case of Device, there is no item and this caused a seg fault when
631 Device appears in the conf file.
632 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
633 avoids pulling in config.h multiple times in some new code.
635 kes Fix spurious warning message printed when creating a volume with
636 a LabelFormat. This fixes bug #976.
638 Release Version 2.2.5
640 kes Add JobId in place of Job name in all the Jmsg() output.
641 kes Correct the APP_DESC for the Win32 storage service (remove an e).
643 kes Make maxvol-test and new more strict maxvol2-test work.
644 kes Print JobId in all Jmsg() job output.
646 kes Add new SD despooling attributes and Dir inserting attributes
647 job status codes. This fixes bug 961.
648 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
650 kes Fix doc issue. This fixes bug #963.
651 kes Fix listing performance problems in bat. Pointed out by
653 kes Remove old debug code.
654 kes Fix bat code that tests for Win32. This should fix bug #968
655 kes Query 5 list wrong Vol after migration. This fixes bug #960
657 ebl Fix #969 where user can't change Replace option in restore menu.
659 kes Save jcr in thread specific data (tsd) for each thread.
660 kes Make Dmsg() print JobId as -%u.
661 kes Make Jmsg, Emsg, and others automatically pickup the jobid
662 for the thread if it exists.
663 kes Remove old reservation debug jid code.
664 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
665 ebl Add an option that permit to specify spool size in job
666 definition. (Applying patches/testing/spoolsize_per_job.patch).
667 You must upgrade SD and DIR at the same time.
668 dvl Add new configuration item --archivedir
669 dvl Adjust regression tests to use tmp not /tmp. This will allow
670 multiple concurrent runs of the regression tests.
672 kes Fix race condition that drops final block written to volume.
673 This happens in rare cases with multiple simultaneous jobs
674 when the Volume fills. This fixes bug #964. May be related
675 to bug #935 and possibly #903.
676 kes Eliminate more strerror() and replace with bstrerror().
677 kes Remove BSD getopt and replace with unrestricted IBM version.
678 kes Fix Win32 build for changed calling sequences.
679 kes More tweaks to the mount volume routines to get everything
680 right. Changed variable name from find to have_vol, which is
681 much easier to understand.
682 kes Enhance btimer debug code.
684 kes Fix FD->SD authorization failure, which was due to spurious
685 wakeups from a pthread_cond_timedwait(). Simply check the
686 predicate before continuing. This fixes bug #953.
687 kes Add const char where needed (more to do). Remove temp debug code.
689 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
690 kes Don't overwrite error message in check_tables_version.
692 kes Unlock batch insert tables with same calls used elsewhere.
693 kes Allow starting 59 jobs a second.
694 kes Make SD session key more random.
695 kes Add retry for SQLite opening db if it fails. Probably helps
697 kes Suppress extra error messages during batch insert failure.
699 kes Add jcr to timer packets so if killed message can be sent to job.
700 kes Add JobId to all Dmsg() output.
701 kes Put some FD auth code on dbglvl rather than fixed.
702 kes Return insert attributes error message in db msg buffer to avoid
703 false error messages. Helps fix bug #966.
704 kes Separate batch init error messages. Probably helps fix bug #966.
705 kes Make SD code that contructs attribute insert check string lengths
707 kes If Dir gets an error during inserting attributes, cancel SD.
708 This reduces unnecessary error messages.
710 kes Correct search boolean for getting Volume info
711 ebl Cleanup batch insert code. Probably fixes bug #965.
712 kes Back out one small change to the reservation system (reserving a volume).
713 kes Rework how a Volume is mounted. It is now much more intelligent and
714 will always attempt to use any mounted volume if possible and reduces
715 calls to the Director asking about volumes.
717 kes Turn off some code when batch insert not enabled.
718 kes Edit FD name in connect error messages.
719 kes Rework the reservation system to take into account that the Director
720 might give us a Volume that is different from the current one being
721 used, and to ensure that we don't exceed Maximum Volume Jobs.
722 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
723 fatal error with multiple jobs running'
724 kes Add more debug code in reservation system.
725 kes Implement maxvol-test to check bug #947.
727 kes Add code to handle tray monitor separated from Win32 FD.
728 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
730 kes Add missed return in fixing verify bug -- trunk only.
731 ebl Fix a command parser issue causing a director segfault.
732 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
734 kes Increase the max block size to 4MB fixes bug #957.
735 kes ERABT if user sets min block size > max block size. Fixes bug #956.
736 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
737 is not properly mounted (recognized) during a poll.
738 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
739 Job that has differences reports Verify OK.
740 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
742 ebl Add an option to operate on all pools with update vol parameters.
743 This complete the project 20. Patch from Nigel Stepp.
744 ebl Add history support to bconsole when using readline.
745 Using Ctrl-D to exit doesn't update .bconsole_history
746 kes Modify new volume algorithm to use max MediaId for generating next
747 volume number rather than the count of Volumes. This should essentially
748 eliminate the failure rate if some volumes were deleted. Bug #921.
749 kes Begin implemention of Optimize Job Scheduling.
750 kes Implement restore callback that Dirk and I agreed on for bat
751 restore. This fixes bug #928. Restore of backup of zero files fails.
752 kes Fix SQL Catalog logging which broke with new db_escape_string
755 Release Version 2.2.4
757 kes Fix bacula_cats.def for new db_escape_string().
758 kes Increase size of name string when FD making connection to SD.
759 May fix bug #953. FD->SD connection failure.
761 kes Add code to help Dan debug 2drive-incremental-2disk test.
762 kes Add code to try to fix bug #908.
763 kes Add waits to multiple exit detection code to try to force pid
764 file to always be deleted.
765 kes Restore good dev.tar.gz to rescue set appropriate binary property.
767 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
768 trying to switch drives by checking for blocking before unblocking.
770 kes Cancel storage daemon in all cases where FD reports error. This
771 should fix virtually all cases of bug #920.
772 kes Fix db_escape_string() for MySQL which did not compile.
774 kes Fix error message that was clobbered when Dir tells SD it does not
775 have write permission on Volume. This should fix a minor point
776 in bug #942, but not the main problem.
777 kes Add code to cancel job in SD if FD connection fails. This should
779 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
780 dvl Pass jcr and db into db_escape_string() to enable better escaping
782 kes Fix migration code to get correct Volume name with multiple volumes
783 by skipping |. Fixes bug #936.
784 kes Implement patch supplied by Landon to fix bug #944 where using
785 TLS with bconsole uses 99+% of the CPU.
786 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
788 kes Move patches into patches directory.
790 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
793 ebl Using 'm' in bconsole will show messages like before,
794 and not memory usage.
795 kes Fix bug #935, and probably also bug #903 where files were not
796 restored. MediaId was not properly set in JobMedia record after
799 kes Suppress chown and chmod error messages if the FD is not running
802 kes Apply Martin Simmons' patch that should turn off the new API usage
803 when batch insert is turned off allowing building on older
805 kes Add ./configure search in qwt-qt4 for qwt package
807 kes Bacula is now free of 3rd party GPL copyrighted code!
809 kes Add guid_to_name.c/h which replace idcache.
810 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
812 ebl Detect if new PosgreSQL batch insert API is present.
813 kes Correct incorrect mempool call causing Director crash. Occurs on
814 systems without va_copy().
815 sb Update spec files for 2.2.1 release
817 kes Fix memory pool call in ua_output.c. bug #934.
818 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
819 Add test program to fnmatch.c
821 kes Integrate patch to README.vc8 from
822 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
823 edit it to get it into Unix patch format.
824 kes Implement mkpath.c to replace old FSF makepath.c
826 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
828 Release Version 2.2.1
830 kes Update POTFILES.in
831 kes Cleanup a few underquoted AC_DEFUNs in configure
832 kes Apply patch from Martin Simmons that adds a test for va_copy to
835 kes Fix bug #921 by increasing the number of tries to create a new volume
837 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
838 can be called multiple times. Implement a version for machines
839 without va_copy() that gets a big buffer.
841 kes Integrate more portable zone offset code into bsmtp.c
842 Submitted by Attila Fülöp.
844 kes Fix bad SD->FD return status reported by
845 (James Harper) <james.harper@bendigoit.com.au>
846 ebl Fix a bug in read_close_session which return random status
847 thanks to James Harper
849 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
850 and directory names during restore of single file/directories.
851 kes Add sanity checks to .sql command when string is empty. Hopefully
852 that will resolve Dirks Director crash.
854 kes Apply patch submitted by Martin Simmons that corrects a seg fault
855 in the bsmtp chat subroutine when debug is >= 10.
857 kes Fix Director crash when running bat SQL queries.
858 kes Add David's notes on Item 8: Copy pools.
860 kes Rework projects file to be current and ready for a vote.
861 kes Enhance lex scanner error message.
863 kes Tweak LICENSE file to mention BSD code.
864 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
865 if specified on the ./configure.
866 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
867 This class is intended to allow us to open a second bsock to the
868 Director while in the restore subdialog.
870 kes Fix configure to create bat Makefile before creating dependencies.
871 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
872 kes Add a tooltip to the tray monitor.
873 dvl Set the Director's PID file before dropping privs. This fixes
876 kes Update AUTHORs file
877 kes Increase the default max concurrent jobs to 20 in FD and SD to
878 correspond with the default .conf files.
879 kes Rewrite the Win32 service routines. This eliminates the 3 copies
880 some different, of the same file created by RN when porting the
882 kes Rearrange some of the Win32 directories and the placement of the files
884 kes Set DEVELOPER flag in version.h
886 ========================================================================
887 Release Version 2.2.0
889 kes Apply a second doc patch from Marc.
890 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
891 improves the tips section that discusses how to setup multiple
894 kes Update bat README file.
895 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
896 corrects a typo in the Recycle status check in db_find_next_volume().
897 This will probably fix a number of annoying problems with multiple
899 kes Modify most of dird/msgchan.c to use bsock class calls rather than
900 bnet calls -- no functionality change.
902 kes Modify the Verify output to specify if files are missing on
903 the Volume(s) or disk. Fixes confusion in bug #916.
904 kes When more than one Volume is read in a migration job, the last
905 Volume bytes reported are from the last read volume rather than
906 the last written volume. Fixed. This fixes bug #910.
907 kes Fix display of Recycle flag after update volume=foo recycle=yes.
908 It previously printed New Recyle flag is: no. This fixes bug
911 kes Correct seg fault when switching tape drives during restore.
912 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
913 be used until after 2.2.0 release.
915 kes Remove fnmatch() in SD that permitted wild card specifications.
918 kes Fix %g in filename returned by SQL for browse tree reported by
920 kes Fix configure so that it puts config.out in the cwd rather than
922 kes Attempt to fix the locking problem reported by Eric in bug #906.
923 kes Make berrno class to leave errno unchanged after constructor call.
924 kes Make bnet_server use the heap rather than the stack to allocate
925 its socket fd pointers to avoid a crash at termination. Problem
926 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
928 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
929 and putting it in depkgs-qt along with Qt4.3.
931 kes Rework code in acquire.c that switches drives for reading when
932 the Media Type does not match. This should fix bug #906
934 ebl Fix a director segfault during job setup #907
935 kes Correct seg fault in postgresql when first operation returns no
936 rows. Fixes Dirks File browser problem seg fault with bat.
938 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
939 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
942 kes Implement PopUp YES/NO dialog for bat.
944 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
946 kes Correct RunScript to terminate job in FD on failure.
947 kes Change abort_on_error and AbortJobOnError to fail_on_error
948 and FailJobOnError in RunScripts.
949 kes Minor tweaks of code formating in RunScripts, principally to
950 avoid depassing 80 columns.
952 kes Eliminate one #ifdef Win32 in bsmtp
953 kes Implement grow tool to grow a file for testing very large databases.
954 kes Add big-vol-test to test Bacula seeking with > 5GB.
957 kes Modify find_next_volume() to return all values in Media record.
958 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
962 kes Update Release notes
964 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
965 Warning, in previous beta version, all media get from scratch keep their
968 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
969 This should fix bug #842. Made a note to look at removing the temp
970 files at the end of the install.
971 kes Add ability to mount and unmount a file device providing it is
972 marked as being removable and has the appropriate mount and unmount
973 commands defined in the Device resource. This fixes bug #830.
974 kes When applying a storage override, release all previous storage
975 definitions rather than just prepending the new storage.
976 This should prevent a good deal of confusion.
978 kes Implement ./configure search for qwt libraries.
980 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
981 Win32 FD. This should fix bug #893.
982 kes Remove an unnecessary beep in Win32 init code.
983 kes Update copyright dates in Win32 executable about boxes.
984 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
985 code with a BSD getopt.c and getopt.h.
986 kes Remove sched.h from the Win32 compat directory -- not used.
987 kes Remove the Exit menu item from the Win32 tray monitor. If you really
988 need to shut it down, do it through the services panel or the command
990 kes Remove some inappropriate Bacula FSFE copyrights.
991 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
992 kes Fix regress config non-portable test as pointed out by
993 Florian Heigl <florian.heigl@gmail.com>
994 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
995 as pointed out by Florian Heigl <florian.heigl@gmail.com>
997 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
998 Reported by Frank Sweetser.
1002 kes Fix client-only build.
1003 kes Integrate client-only fixes for bsys (initgroups) and conio from
1004 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1005 kes Make arguments to get_scratch_volume() in same order as other
1007 kes Rework the prune_volumes() subroutine so that after purging and
1008 no volume found in desired pool, it will check for a scratch
1009 volume. This prevents recycling the whole scratch pool.
1010 kes Add code to status storage to print boffset_t (largefile support).
1012 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1013 kes You now need a --with-qwt=<dir> to be able to build bat.
1014 kes Update src/win32/cats/bacula_cats.def to include the new
1015 db_get_query_dbids() call on Win32.
1017 kes Correct a problem when selecting a scratch volume and moving
1018 it to another pool that lost some columns.
1019 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1020 kes Enhance Autochanger error messages to include Volume and device name.
1021 kes Rework prune_volumes() code to take account of InChanger flag,
1022 and to handle recycling volumes going to the Scratch pool and
1023 current pool because the RecyclePool directive.
1024 kes Implement a better and more efficient db_get_query_dbids() to
1025 handle creating and passing back a list of DBIds.
1029 kes Start work on new more efficient DBId subroutine. First use
1030 will be for recycling volume to Scratch inchanger.
1031 kes Increase number of JobIds in pruning from 1000 to 10000.
1032 This to be replaced by above routine.
1033 kes Begin implementation of building Qt4 on Win32.
1034 kes Correct typo in fix I added for bad TLS shutdown.
1035 kes Pull 2.0.3 patches into patches directory.
1036 kes Update Release notes. Include qt-console in line count.
1037 kes Update Projects file.
1039 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1040 bug in migration code where a job that spanned two volumes
1043 kes Implement new BST_DESPOOLING blocked state. Change from locking
1044 during despooling in SD to blocking. This means that other threads
1045 can work with the device structure, in particular the reservations
1046 system while despooling.
1048 kes Fix return in reservation message queue that missed clearing
1049 the jcr lock (implemented 26Jun07 below).
1050 kes Rename a number of dev methods to make locking function names
1052 kes Document locking in lock.c. Move lock structures to new file
1055 kes Move reservations message lock to lock jcr only this
1057 kes Move main SD locking code into lock.c (new file).
1058 kes Update Win32 build to include lock.c
1062 kes Dirk committed the qwt library code for drawing graphs in bat.
1063 kes Tweak install of qwt so that it is integrated with ./configure.
1065 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1066 out by Eric (my typo).
1067 ebl Fix configure.in to get batch mode enable
1068 kes Return correct string from authenticate.cpp in bat when connecting
1070 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1071 spurious line drops when using TLS.
1072 kes Do not file reparse points when restoring a file that already
1075 kes Implement Windows reparse points -- similar to directories, but
1076 we do not descend into it. This is a first cut. They seem to
1077 be backed up, but restore is not yet tested.
1078 kes Remove restore_blocking in tls code when shutting a socket to leave
1079 it in blocking mode. Hopefully this will fix the encryption bug
1080 reported by Frank Sweetser.
1081 kes When opening a file for backup, tell the OS that we are going to
1082 read it sequentially -- optimization.
1083 kes Change variable names in authenticate_director() to not conflict
1084 with member names in bat. Caused great confusion with compiler,
1087 kes Queue openssl error messages in case of comm problem.
1088 kes Do shutdown() call if socket terminated.
1089 kes Remove some duplicated code in tls.c
1090 kes Move more of the bsock member variables into private and access
1092 kes Add Frank Sweetser's tls-test to the regression suite.
1094 kes Add Swedish sv.po file
1096 kes Don't print clock skew message in FD if less than 3 seconds diff.
1097 kes Add a bit of VSS info to status client.
1098 kes Implement a first cut of Vista VSS, using Win2003 code.
1100 Release: 2.1.20 beta
1102 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1103 loaded tape but uses first drive).
1104 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1105 This was indeed a Win32 issue.
1107 kes Simplify search of autochanger for in-use Volume.
1108 kes Fix exit condition of check for in-use volume. kes Remove
1109 inappropriate my_postgresql_free_result() in db_close()
1111 kes Fix bad return in FD when encryption signature not found.
1112 Probably caused a crash.
1113 kes Inhibit missing encryption signature error messages for
1114 file types where no signature computed.
1115 kes Correct inverted check on autochanger in reservation system.
1116 kes Tweak debug code in autochanger reservation.
1118 kes Add some additional locking in the cats directory in subroutines
1119 that modify packet variables called from batch insert.
1120 kes Rework how dcrs are allocated. new_dcr() can now be called
1121 with an existing pointer, and it will simply clean it up.
1122 This allows the reservation system to test various different
1123 devices, and will permit easy device changes.
1124 kes A bunch of changes all over to handle new new_dcr() calling
1126 kes Work more on the Volume management in the SD. Remember Volumes
1127 for tape drives and for autochangers (even virtual disk changers).
1128 kes When looking at the Volume list to reserve a drive, handle
1129 autochanger names correctly by interating through the changer
1130 devices. Also call the Director to see if a Volume is suitable
1131 for the current job.
1132 kes Fix some bugs in bscan. Make sure all media records are written.
1133 Make sure that valid JobMedia records are written for disk files.
1134 Previously they were completely wrong.
1135 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1136 that the URLs don't change and so that the developers will all
1137 work off the same copy. Rebuild from scrach.
1138 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1140 Release: 2.1.18 beta
1142 kes Fix seg fault in FD from incorrect digest size.
1143 kes Fix argument to non-OpenSSL crypto.c subroutine.
1145 Release: 2.1.16 beta
1147 kes Remove a few malloc()s from the encryption code.
1148 kes Use the class calls to bsock in filed/backup.c and restore.c in
1149 place of the old bnet_xxx code.
1150 kes Implement code that does an on the fly calculation of the
1151 signing digest during restore of encrypted files. It makes
1152 a best guess at the algorithm, and if it is not correct, will
1153 then revert to the old code which reads the file after it is
1155 kes Implement at least one missing crypto stream in stream_to_ascii()
1156 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1157 #877 where a reload with bad syntax causes Dir to exit.
1159 Cut: 2.1.14 beta (not released)
1161 kes Do not free a volume on a tape drive until another volume is
1162 mounted and read, or the autochanger unloads the volume.
1163 This should help the SD re-use volumes that are already mounted,
1164 and should fix bug #886.
1165 kes Apply patch from user brettedgar that allows gnome2-console include
1166 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1167 kes Apply patch from Lucien Weller that fixes day of week calculation
1168 because of DST flag problem. Fixes bug #887.
1170 kes Move find_next_appendable_volume() to after acquiring a valid device
1171 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1173 kes Unable to reproduce bug 872. However added additional testing for
1175 kes Bug #874 resolved by documenting SQLite limitations.
1176 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1177 kes Bug #881 resolved by removing typo in mtx-changer script.
1178 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1179 approval. Added a link to the wiki on the web page, and implemented
1180 a backup from http://paramount.ind.wpi.edu
1182 kes Fix update allfrompool to pass pool name.
1184 kes Convert to pure GPL v2 license.
1185 kes Fix sscanf problems reported by Peter Buschman that caused
1186 a bus error on Solaris.
1187 kes Rework (simplify) the select prompt in bat.
1188 kes Move get_jobid_from_tid() into lib and create a
1190 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1191 should definitely fix the problem of lost error messages in the
1193 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1194 kes Eliminate tcpd.h from the project. Enclose the #include from the
1195 library with extern C ...
1196 kes Add print of signal name when a signal is trapped.
1198 Release: 2.1.12 beta
1200 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1202 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1203 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1204 makes SQLit3 run 30 times faster, though a bit less safe.
1205 kes Implement --with-batch-insert in configure and detection of thread
1206 safe libraries. It is on by default, but turned off if no thread
1207 safe library (e.g. SQLite 2) is available.
1209 kes Fix Bacula PostgreSQL buffer overruns.
1210 kes Do better checking for NULL results returned from PostgreSQL;
1211 implement retry for failed queries; clear results buffer after
1212 failed query. Hopefully this will correct the PostgreSQL failures.
1214 kes Implement algorithm to handle only one appendable volume with
1215 Prefer Mounted Volumes = no.
1216 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1217 returned from a query.
1218 kes Make volume lock recursive.
1219 kes Implement an additional volume reservation algorithm that
1220 starts by considering all reserved volumes then uses the
1221 old brute force algorithm of searching the resources to
1222 find a suitable device.
1223 kes Add new reservations debug code and refine the old code.
1224 kes Update the win32/dll/bacula.defs file.
1226 kes Tweak reservations algorithm to permit a few more cases, i.e.
1227 volume reserved, but on different drive, ...
1228 kes Enhance SD status to include Pool and Media Type for drive in a
1229 more readable format (a bit longer).
1230 kes Fix PostgreSQL double free.
1232 kes Minor refactoring of restore decryption code.
1233 kes Add code to smartall.c to detect double free of a buffer.
1235 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1236 so that bsmtp will create a correct email address (mailbox only).
1237 kes Modify 'memory' command so that the buffers are listed as 'In use'
1238 to avoid confusion with Orphaned buffers.
1239 kes I reworked the OpenSSL include/lib flags to be handled in
1240 the standard Bacula way, which should fix bug #863 concerning
1241 non-standard OpenSSL libraries.
1243 kes Implement Help Browser window for bat.
1244 kes Fix reload bug that reset StorageId to zero.
1246 kes Fix TLS #ifdefing when TLS turned off.
1247 kes Ensure that when labelling a tape with Slot=0 that InChanger
1249 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1251 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1252 add DISTINCT (required by PostgreSQL).
1253 kes Implement BSOCK authenticate_director() method. Eventually will
1254 authenicate all daemons.
1255 kes Move several more functions into the BSOCK class.
1257 kes Add code to tell the OS that we no longer need a cached
1258 file that we were reading. In findlib/bfile.c. Also,
1259 only cache files that we are reading. Thanks to
1260 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1261 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1262 kes Implement script to automatically generate cats and dll .def
1263 files for Win32 dll.
1264 kes Update README.mingw32 to include new .def file generation.
1265 kes Correct typo in UTF-8 error message as reported by:
1266 jhernandez <julianhernandez@gmail.com>
1267 kes Add additional sm_check() code on debug level 1.
1268 kes Set default debug level to 1.
1269 kes Trap SIGABRT in attempt to get traceback.
1271 kes Reduce bat connect timeout from 30 to 15 seconds.
1272 kes More restructuring and implementing BSOCK class in place of
1274 kes Remove a few unnecessary malloc() tests in crypto code.
1275 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1276 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1277 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1279 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1281 kes Fix Verify InitCatalog. The attributes were not pointing to the
1282 correct saved location.
1283 kes Implement message callback so that GUI is sure to get all
1284 daemon messages. Currently displayed in a dialog in bat.
1285 kes Ignore SIGUSR2 (Bacula timer) in bat.
1286 kes Apply regress patch from bug #859 to allow regress to work
1287 with Solaris compiler.
1289 kes Begin adding TLS support to bat.
1290 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1291 clean up lex.c and make it more readable.
1293 kes Move more bnet functions into the BSOCK class.
1294 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1295 kes Complete change of berrno strerror() method to bstrerror()
1297 Release: 2.1.10 beta
1299 kes Cleanup incorrect email addresses in bsmtp.
1300 kes Make bat display initial messages rather than discard them.
1302 kes First cut of adding .mod to the run command.
1303 kes Implement auto display of messages in bat.
1304 kes Enhanced preferences to allow all Bacula output to be
1307 kes Try to make bsmtp date routines more generic.
1308 kes Fixed bug #856 autochanger documentation.
1309 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1310 kes Add new cats entry point so Win32 builds.
1312 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1314 kes Do better checking for the MySQL 64 bit libraries looking for both
1315 .a and .so libraries.
1316 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1317 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1318 kes Require the thread safe version of MySQL during configure. Thanks
1319 to Andre Noll for pointing this out.
1320 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1321 continuing in migration code.
1322 kes Apply implementation of tray-monitor font derived from gnome-console
1323 submitted by Andreas Piesk <a.piesk@gmx.net>
1325 kes Eliminate important memory loss in SQLite
1326 kes Fixed the batch insert MySQL thread specific data that was not
1327 being freed. See cats/mysql.c:db_thread_cleanup().
1328 kes Fix restore before command.
1329 kes Convert old hdr.name to name() in a few places.
1330 kes Implement update jobid command.
1331 kes Return all time_t dates in db_get_job_record()
1332 kes Stop watchdog in SD earlier.
1333 kes Put Pool just after Storage in please mount message.
1334 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1337 kes Update the po files.
1338 kes Fix Verify InitCatalog by making it cache attributes.
1340 kes Change name bacula-bat to bat for man 1 page to correspond to
1342 kes Check for client and store NULL pointers in status command. This
1344 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1345 kes Fix sign extended editing of %p.
1346 kes Clean out a little old #ifdefing in cats/mysql.c
1348 kes If time diff between DIR and FD is more than 600 seconds convert
1349 INFO message to WARNING.
1350 kes Implement heap size display in status for all daemons.
1351 kes Attempt to fix MySQL db open memory loss (not successfull).
1352 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1353 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1354 Query. This looks like a MySQL but but by doing extra releases,
1355 the memory goes away. This should fix bug #847.
1357 kes When backup fails, cancel SD before waiting for sd termination.
1358 kes If SD is waiting for FD to connect during cancel, wake up the
1360 kes Fix fsf code so that errno is correctly reported.
1361 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1363 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1364 so that Bacula doesn't later stumble into a seg fault.
1365 kes Use the term Restore Client in the restore Job report.
1366 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1367 the original job's FileSetId.
1368 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1369 spooling in migration jobs. Not yet tested.
1370 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1371 reading conf file from a pipe. However, do it with open_bpipe()
1372 rather than popen. Not yet tested.
1374 kes Fix an ugly bug where the VolCatBytes were getting updated
1376 kes Implement bconsole memory command that prints current memory
1377 usage, plus smartalloc dump.
1378 kes Clarify some error messages in backup, admin, and migrate.
1379 kes Shrink label dialog to smaller size.
1380 kes Invert Cancel OK buttons on restore to be OK Cancel.
1381 kes More strerror() to bstrerror() conversions.
1383 kes Start implementing bstrerror() in place of strerror().
1384 kes Stripping path -- seems to work.
1386 kes Prevent door and port files from being restored (mostly
1388 kes Free an unreleased buffer in compat code.
1389 kes Change console Job name from *Console* to -Console- to eliminate
1390 Win32 filename problems. Put Win32 path separator when creating
1391 Console file. This fixes bug #846.
1392 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1394 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1396 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1397 to force Win32 error message.
1399 kes First cut strip path. The data should be passed to the FD,
1400 but nothing is done with it yet.
1401 kes Enhance the digest and signature routines in the crypto
1402 library to accept a JCR and to use it to print error messages
1403 so that they will go in the Job report rather than the daemon's
1405 kes Simplify some of the verify signature code.
1406 kes Simplify a few of the alternative returns in the signature
1409 ebl Use only POSIX regex instead of GNU regex in breg.c for
1410 File relocation. It fix broken freebsd compilation.
1411 kes Convert all other Dir files to use new ua class message
1413 kes Tentative fix for missing digest signature in bug 807.
1414 kes Correct handle problem in new win32_ftruncate routine.
1415 kes Convert ua_purge.c and ua_update.c to use new ua class
1416 message routines for bat.
1418 kes Correct incorrect installation of LICENSE in Win32 installer.
1419 kes Display LICENSE at the beginning of the Win32 install.
1420 kes Attempt to correct the need for the png files to be installed
1422 kes Reapply my bat.conf install script in qt-console. I think I
1423 editted bat.pro instead of bat.pro.in and it was lost.
1424 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1425 the /var/lock/subsys for subsysdir. Also corrects typos in the
1428 kes First cut update job.
1429 kes Correct configure to include qmake of src/qt-console directory.
1431 kes Make restore job yes/mod/no print in one command so GUI works.
1432 kes First cut implementing backup and restore client.
1433 kes Correct editing in Verify output that caused a seg fault.
1435 kes Insure that bat.conf is not overwritten during installation.
1436 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1437 while I was implementing migration in March 2006 !
1439 ebl Cleanup file relocation, using char *RegexWhere instead of
1440 char *where + bool where_use_regexp
1441 kes Update some manpages and add bat manpage.
1442 kes Make a first cut at converting bacula.spec.in for bwx-console
1444 kes Apply patch from John Goerzen to add hostname as fourth argument
1445 to make_catalog_backup script.
1446 kes Fix typos I introduced into bsmtp.c
1447 kes Make pm_strxxx() routines handle input of NULL pointer. This
1448 is to protect from NULL pointers returned from SQL databases.
1449 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1450 kes Add more debug to FIFO code -- fix fifo regression test.
1452 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1453 kes Add thread timer to bnet_connect() to break from OS if wait time
1456 kes Update Win32 build to include new files, new symbols, and
1458 kes Implement socket level heartbeat (tcp_keepidle)
1459 ebl Commit File relocation patch
1460 kes Make bat have 'make install' target.
1461 kes Warn during install if old gnome-console binary found.
1462 kes Warn during install if old wx-console binary found.
1463 kes Add -8 option to bsmtp command line to add content type utf-8.
1464 Fixes bug #809. (Character coding problem in bsmtp).
1465 kes If < is found in target (from, to, cc) then do not enclose the
1466 target in < > in bsmtp. Fixes bug #772 (malformed address).
1467 kes When printing certain items in dbcheck, stop after 300000.
1468 Fixes bug #822. (dbcheck loops).
1469 kes Incorrect status in Dir after waiting for mount with poll set.
1472 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1474 kes Print waiting to reserve a device every 5 mins.
1476 kes Don't call close_part in label.c if tape and relabel.
1477 kes Don't free volume if busy in close() -- should help with
1479 ebl Fix #824 RunScript bug (After script could be execute twice)
1480 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1481 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1482 Add a regression script to test RunScript
1484 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1487 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1488 deprecated. No additional bugs will be fixed, and they will be dropped
1489 in a future release (probably 2.4.0).
1490 kes Change name of wx-console to bwx-console to make it more Bacula
1492 kes Change the name of gnome-console to bgnome-console to make it
1495 kes Some time in March, a Feature Request with patch from Jorj Bauer
1496 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1498 The ability for the director to validate a Client (FD) CN against
1499 an arbitrary set of patterns rather than the hostname, with
1500 A new 'TLS Allowed CN' set of directives which are implemented
1501 in the Client resource. Then pattern matching is used in place
1502 of hostname matching against the Certificate's CN. As an example, we
1503 have certificates which (a) use a local CA, and (b) have a CN of the
1505 kes Add new/changed entry points to Win32 build
1506 kes Create unaccepted-projects for projects that are not accepted.
1507 kes Simplify locking in the reservations system.
1508 kes Add more debug code in reservations.
1509 kes Make sure error condition on reserving a volume is handled correctly.
1510 kes Correct handling of volume_in_use.
1511 kes Correct handling of initializing a device.
1512 kes Move handling of broadcasting releasing a device into release_device().
1513 kes Correct attaching dcr to dev so that it is only done if device
1514 is properly initiated.
1516 kes Locking debug level tweaks in SD.
1517 kes Tweak new Volume code.
1519 kes Add exec external-command [wait-seconds] to bconsole. This
1520 executes the external-command. Note! normally external-command
1521 should be enclosed in double quotes.
1522 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1523 it should normally be off in a production system.
1525 kes Implement die command for SD so that we can force it to dump.
1526 kes Implement SD lock debug code.
1527 kes Implement new algorithm for keeping Volume list in SD. It
1528 is now owned by the device.
1530 kes Implement new code for freeing in use volumes that should
1531 resolve if not all, some of the problems of multiple drive
1532 tape conflicts described in bug 801.
1534 kes Fix gui/bacula-web/images files in svn.
1535 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1537 ebl Fix a bug in batch mode (in string escape)
1538 kes Correct migration prune SQL typo that crept in in a
1539 recent 2.1.x change.
1541 kes Move bnet_despool() into class in bsock.c
1542 kes Modify job report to include director name and Build OS.
1543 kes Move drop root privilege and check_catalog() before fork.
1544 kes Add update database scripts (version 9 to 10) to updatedb directory.
1546 ebl Check size and age of each file after its backup to see if
1547 it has changed during backup, if 'checkfilechanges' is set.
1548 The FD will do an extra check (stat(2)) after
1549 each file backup. mtime, ctime and size are compared with
1550 'before backup' information. If time or size mismatch, an
1551 error message will be generated. You must upgrade FD to use it.
1553 kes Make database name and user configurable
1554 --with-db-name=xxx --with-db-user=xxx
1555 kes Add back database type to message.c for debugging.
1557 kes Implement dir_sql() which issues an SQL query.
1558 kes Modify bat medialist to use dir_sql() and do some minor C++
1559 formatting as well as eliminating a number of pointers, simplifing
1562 kes Fix some of the mtx-changer grep commands for tape label readers.
1563 kes Convert a number of bsendmsg into the appropriate send/warning/error
1564 message class calls.
1565 kes Suppress the using database message in the .sql command.
1566 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1568 kes Add context menu for floating a window.
1569 kes Some minor cleanup and name changes in qt-console
1570 kes Add doing mt setblk 0 in Win32 mtx-changer.
1571 kes Apply Martin's bug fix to move definition of ENODATA for
1573 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1574 sqlite2 and sqlite3.
1576 kes More pruning cleanup.
1577 kes Turn on wait_for_drive by default in mtx-changer.
1578 kes Turn on Batch insert code by default as it now passes regression.
1579 kes Add ./configure --enable-bat to enable building of Bat.
1580 No install yet though.
1582 kes Implement a new .sql command for bat.
1583 kes Implement code to turn off pruning in obtaining the next volume.
1584 Pruning is turned off for the status dir command, but turned on
1585 for SD requests and for the list nextvolume command.
1587 kes Correct Qmsg() that was not updated correctly when committing a
1588 previous change (probably the recent TLS patch).
1590 kes Write new subroutine is_volume_purged() that explicitly checks
1591 if the Volume is purged, and if so marks it as such. This should
1592 resolve problems reported about needing to mount twice to recycle
1594 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1595 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1596 amount of duplicated code.
1597 kes Do volume pruning only for the Media Type desired (reduces pruning time
1598 if multiple Media Types are in the same pool).
1599 kes Implement more detailed info in the Job report for the Bacula version
1601 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1603 ebl Add bbatch tool to bench database and insert mode.
1604 Fix sql quote stuff in batch mode
1605 Fix sql stuff for mysql
1607 kes Correct problems with am/pm scheduling. Fixes bug #808.
1608 kes Implement new prunning code that prunes up to 1000 jobs at
1609 the same time. The same technique can be applied to a number
1610 of other prune/purge subroutines.
1611 kes Add an insanity check when starting a new tape job to ensure
1612 that the tape position has not been changed. If so fail the
1614 kes Fix Win32 build for dlls to add the folllowing:
1615 src/lib/bsock.c -- new file with new entry points
1616 src/lib/dlist.c -- new entry points
1617 src/cats/sql_create.c -- new entry point
1618 src/cats/sql_cmds.c -- new DATA item exported
1620 ebl batch mode cleanup bscan-test is ok now.
1621 kes Implement SD code to check length of disk volume before appending.
1623 kes Correct return status on db_batch... routines.
1624 kes Add call to db_write_batch_file_records() to migration code.
1625 ebl Fix AfterJob timing
1626 kes Move the checking of the database in initializion of the Director
1627 to after we drop privileges. This avoids the need for both root
1628 and bacula access to the DB.
1629 kes Correct a misplaced variable definition in src/filed/backup.c
1630 kes Correct how the new batch insert db_create_attributes_record()
1631 uses the arguments. Caused a seg fault in bscan.
1632 kes Implement lock() and unlock() methods in DEVICE class.
1633 Implement block() and set_block(xx) methods in DEVICE class.
1634 kes Modify bnet_connect() so that it uses time() to check for the
1635 wait time expiring (on some OSes, some system calls may not
1636 return immediately).
1637 kes Modify Verify to obtain the previous JobId when it is actually
1638 running rather than at schedule time (as it was in 1.38.x).
1639 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1641 kes When checking pid in pid file, continue running if the pid is
1642 the same as ours. This occurs on IRIX after a system crash.
1645 kes Extend new GUI API.
1646 kes Make the ua structure a class, and implement send_msg(),
1647 error_msg(), warning_msg(), and info_msg().
1649 kes Apply fix from for building wx-console on the Mac from
1651 kes Implement new select mechanism for GUI programs.
1652 kes Reorganize initialization of stackedWidgets in bat.
1654 kes Add updated nagios plugin supplied by Christian Masopust.
1656 kes More bat implementation.
1657 kes File migrate bug with Pool Occupancy using mediaid instead
1658 of jobids. Fixes bug #795.
1659 kes Fix orphaned buffers in filed backup and verify due to
1660 crypto buffers not freed during errors. Fixes bug #789.
1661 kes Extend new GUI api code to tree commands.
1662 kes Ensure that tree and dot commands check console ACLs.
1663 kes Permit marking directory with trailing slash.
1664 kes Allow 20 console connections (instead of only 10).
1666 kes Add smartctl call to bacula-sd.conf as an example of getting
1669 kes Modify jobq.c to let simultaneous restore jobs run. This may
1670 cause them to fail if they cannot get a drive.
1671 kes Add Client Connect Wait to Storage daemon to permit users to
1672 modify the time the SD waits for a FD connection.
1674 kes Correct virtual changer check which was backwards. This caused
1675 volumes to be unloaded into slots already occupied.
1677 kes Apply Command ACL filter to JobId list in restore command.
1678 kes Correct typeo in var.c patch.
1680 kes Don't let Bacula prune File or Job records for the current Job.
1681 kes Fix variable substitution pad + inc bug reported (with patch)
1684 kes Correct SQLite log table index as reported by Luca Berra.
1686 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1688 kes Begin implementing new comm signals for API.
1689 kes Fix a few places in lib/message.c where the open fd may
1691 kes Continue implementing lib/bsock.c (real class). Make jcr,
1692 who, host, and port private. There are new methods to access
1693 them for non-class use. This required touching a number of files.
1695 kes Add LANG=C to autoconf/randpass so it works with languages other
1696 than English. Fixes bug #788.
1698 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1700 You will not be able to generate Include/Exclude list any more.
1701 It will be fixed soon.
1702 If you want to use this, you can apply
1703 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1705 kes Restore of sockets created false error messages because Bacula
1706 no longer restores sockets, but the code was still trying to
1707 set the attributes on a non-existent file. Reported by a user.
1708 ebl finish RecyclePool feature
1709 Media will takes Pool.RecyclePool
1710 when moving from Scratch to a Pool or when user will do
1711 update volume=xxx frompool
1712 To use it, add RecyclePool = aPool to your Pool resource
1715 RecyclePool = Scratch
1719 kes Expand new BSOCK class adding signal() and new BNET signals.
1720 kes Begin enhancing the dot commands adding a new API function
1721 that returns more information and will make it easier
1722 to interface to the Director from a program.
1724 kes Make DEVICE fd private. Its new name is m_fd, and can be
1725 obtained with dev->fd() outside the class. This is the
1726 first of many DEVICE members to be made private.
1727 kes Implement Michael Renner's idea on having a virtual disk
1728 changer. I made some minor modifications (e.g. I did not
1729 implement the Virtual Changer directive, but simply set
1730 the Changer Command to an empty string.
1732 kes Implement a BSOCK send() method that writes the whole record
1733 in a single write() request rather than in two.
1734 ebl add update volume=xxx recyclepool=yyyy
1735 volume takes recyclepool from pool when using update volume=xxx from pool
1737 kes Fix encryption deblocking bug, which caused some restored files
1738 to be truncated. This fixes bug #763.
1739 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1740 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1742 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1743 ebl Use btime_t instead of uint64_t in media patch.
1745 kes Optimize the use of the database a bit in the Status dir command.
1746 Only open it when needed, ensure that if any previous database
1747 was opened, it is closed.
1749 kes Correct VolCatBytes bug from media patch.
1750 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1751 in the case of orphaned records.
1752 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1753 and File records in 300K chunks to be more efficient. This
1754 idea came from Juan Luis Frances (if I remember right).
1755 kes Apply Eric's scratch patch that moves a purged Volume to
1756 the RecyclePool. Question: how is RecyclePool set? what
1757 happens to the ScratchPool?
1758 kes Apply Eric's media patch that collects read/write media
1759 times as well as byte counts. This patch requires a
1760 simultaneous upgrade of the DIR and SD. Note, there
1761 should be some way to turn off timing. I'm not sure
1762 times are in Bacula units.
1763 kes Apply Eric's batch-insert patch.
1765 kes Update projects list.
1767 kes Implement Include/Exclude file lists in FD as dlists using
1768 the new dlistString class. This permits efficiently having
1769 large include/exclude lists and completes project Item 25.
1770 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1771 console is authorized to cancel the job. This fixes bug
1773 kes Modify SD so that the VolCatJobs medium record is updated
1774 at the beginning of a Job rather than the end. This
1775 fixes bug #775 where exceeding MaxVolJobs caused jobs
1777 kes Added a mutex around getting and setting Volume information
1778 so that multiple simultaneous jobs will single thread.
1780 Switch to using Subversion
1781 kes Remove src/pygtk-console/ from configure
1783 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1784 plus the entrypoints.
1785 kes Apply patch supplied that corrects debug print
1786 in canceling jobs for max run time. Supplied as
1787 part of bug #621, which was previously fixed.
1789 kes Test on job_canceled() and sd_msg_thread_done inside
1790 loop starting the message thread to avoid a race condition.
1792 kes Remove rl_catch_signal from console.c as it conflicted
1793 with the header definition. Fixes bug #765.
1794 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1796 kes Clarify some stored/acquire messages to indicate if the
1797 problem is with read or append.
1799 kes Fix memory leak with storage ids in cats/sql_get.c
1800 kes Terminate watchdog earlier to avoid reference to released
1801 memory -- reported by Jason Austin.
1802 kes Move closing the database from jobq.c to the director daemon
1803 termination routine. This fixes memory leaks for shadow jobs
1804 (i.e. migration jobs).
1805 kes Free up the unique jobid chain items in migrate.c. This fixes
1806 a memory leak problem.
1807 kes Convert some ugly looking for statements to use foreach_alist
1808 in findlib/find.c. This will facilitate converting the structures
1809 to use dlist (for large include/exclude lists).
1810 kes Fix a bug in the btree.c and btree.h routines, then rename them
1811 rblist and add them to be built in src/lib. Include some new
1812 methods written by Rudolf Cejka that make the code more readable
1813 (hides some of the ugly casting).
1814 kes Add set_next() and set_prev() methods which make the code much more
1815 readable. Also add a new dlistString class that facilitates storing
1816 strings in dlists. To be used in the large include/exclude lists.
1817 kes Make some trivial modifications to lib/tree.h that use rblist
1818 rather than dlist for storing the tree links. This was suggested
1819 by Rudolf Cejka. The result of this is that the restore tree now
1820 uses red-black binary trees rather than simple linked lists. This
1821 should give rather dramatic speed improvements for directories
1822 contining large numbers of directories/files (more than 10000).
1824 kes Fix maxruntime bug #621.
1826 ebl Implement the include JobID in spool file name project.
1827 kes Reorder projects file in order determined by Jan 2007 vote.
1828 kes Implement item #12 on project list -- quick release of FD by
1830 kes Fix open of SQLite3 db where user does not have write permission
1831 so that DIR does not crash. Fixes bug #761.
1833 kes Add back missing @ in Win32 Makefile.
1834 kes Change 'Device not configured to autolabel' from INFO
1836 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1837 which should restart an indefinite # of times.
1838 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1839 other DIR specifications.
1841 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1842 Fix path quoting in SQLite scripts.
1843 Fix problems with SHGetFolderPath.
1845 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1847 kes Fix Job restart on error bug that promotes an Inc to a Full
1848 backup. This should fix bug #755.
1849 kes Add qt-console and first cut of code.
1853 kes Fix Bacula->Documentation link on Win32 to point to index.html
1854 instead of bacula.html. Fixed bug #750.
1855 kes Return JobId in db_get_job_record() when JobId==0. This should
1857 kes Do not release source pointers when restarting a failed job.
1859 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1860 This *should* fix bug #747.
1861 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1864 kes Modify USTORE constructor to set an empty store_source string,
1865 and don't copy the store_source string in a cancel. Hopefully
1866 this will fix Arno's seg fault, bug #744.
1867 kes Add back code to disable conio in configure. Fixes bug #743.
1868 kes Correct the Options scanner in the FD to correctly handle
1869 SHA1 option, which was eating the next option. Reported by
1871 kes Add code to indicate when the SD is spooling, spool wait, and
1872 despooling as requested by Alan Brown.
1874 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob