1 Technical notes on version 2.3
5 ebl Fix bextract to be able to extract non-portable Win32 data to
7 kes Move initialization of read/write res lock earlier in the code.
8 This fixes the crash with a null conf file. This fixes bug
10 kes Redefine CURES in lib/parse_conf to be URES and move it all
11 into lib/parse_conf.c -- this responds to bug #1042, but does
12 not fix it. The fix is not to compile with FORTIFY_SOURCE.
13 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
14 the trunk SVN. I don't think this was reported as a bug.
16 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
18 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
20 kes Add DataDespooling and DataCommitting status (committing is
22 kes Finish implementation of new reservations code noted below.
24 kes Fix bsnprintf for float point numbers. I broke recently when
25 parameterizing some variables. This fixes bug #1036.
26 kes Undo recent reservations changes ... will apply them later
27 when they work better.
29 ebl Fixes #1034 which cause mysql to hang the connection after 8h
30 ebl Change default statistics target of filename.name and path.path
31 fields for PostgreSQL. This speeds lookup by indexes. Thanks
33 kes A few more tweaks to new reservation code. Make sure to clear
34 vol released flag when retaking volume. When reading label and
35 label is bad mark volume unused. When recycling, mark volume
36 unused so it can be renamed.
38 kes Fix reserve_volume() so it doesn't release a volume in use
39 (i.e. a volume entry not marked released). This should be
40 the last part needed to fix bug #1018.
42 kes Move Heartbeat documentation from Job to Director resource.
45 kes Fix existing switch drive SD code to call autochanger to release
46 any old volume. This must be done to keep the autochanger from
47 releasing subsequently newly reserved volumes in doing a close().
48 This should fix bug #1018.
49 kes Fail if attempting to get console input in batch mode. This
50 should help fail RunScript console commands that are incomplete.
51 kes First cut implementing switch_drive() in SD (not actually called).
53 kes Implement first cut running console commands in a RunScript.
55 ebl Fixes bug #1028 where "Selection Type" option was not usable
57 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
62 kes Add new free_tls() entry point so that Win32 builds.
63 kes Fix compile warning in src/lib/util.c
64 kes Fix entry point for edit_job_codes() so that Win32 builds.
65 kes Fix seg fault Frank Sweetser reports in regression testing
66 on his systems. The problem was that the original author of
67 bsnprintf.c did not take into account the side effects of
68 using ++x in the argument to a #define.
69 kes Make SD protocol backward compatible with version 2.2.x.
71 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
72 because Bacula no longer restores sockets.
73 ebl Always use ignorecase fileset option on win32 FD.
75 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
76 that implements double quoting include names in conf files,
77 and also allows piping input by having the first character
78 be a vertical bar (|).
79 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
80 that implement %f in RunScripts to pass the FileSet name.
81 kes Skip leading | when lex input comes from a pipe as suggested
82 by Michael Stapelberg <michael@stapelberg.de>.
84 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
85 Nerijus Baliunas <nerijus@users.sourceforge.net>
87 kes Implement Plugin Directory and plugin events.
89 kes Implement a security enhancement: TLS authentication but no
90 encryption. Enabled by setting 'TLS Authentication = yes'.
91 Note when this is on, TLS encryption is turned OFF!
93 kes This patch corrects a problem where the maximum concurrent storage
94 jobs counter gets out of sync during restore jobs causing jobs to
95 'wait on max Storage jobs'. This patch fixes bug #1009.
97 kes This patch fixes bcopy so that it produces correct Volumes.
99 kes This patch eliminates spurious output to the console during a VerifyVolume
100 job that contains encrypted data. It fixes bug #1024.
102 kes This patch prevents the 'status dir' command from trying to use a scratch
103 volume and possibly moving it from one pool to another. This patch fixes
106 kes Add new include to postgresql.c suggested by Marc Cousins so
107 that it compiles correctly with pgre version 8.3.
109 kes Fix --archivedir addition to configure. Replace it with
110 --with-archivedir in configure.in This fixes the regression
112 kes This patch fixes bug #1012 where the job is canceled because
113 of Max Run Time exceeded when the job has not yet started.
115 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
116 one 'part' to write. Instead of each part being stored on disk,
117 written to DVD, then deleted from disk, all parts are written to disk,
118 and only the last is written and deleted from disk.
119 kes This patch fixes the status command to include the formating string for
120 JS_AttrInsterting. It fixes bug #1021.
121 kes This patch should fix the Mac OS X build problem on the latest
122 Darwin, where sys/types.h was not included correctly (apparently
123 due to a change in the Mac headers). The solution was to explicitly
124 ensure that it is defined for the ./configure.
125 This patch also has a rebuild of configure that includes the Debian
126 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
127 kes This patch should ensure that queued messages to the console are
128 displayed as soon as possible. It should fix bug 1007, but has been
129 reported not to work.
131 kes This patch fixes the infinite loop when trying to increase the
132 maximum number of volumes in a Pool during the add command.
133 This patch fixes bug #1008.
135 Release Version 2.2.6
137 db Remove extra data on estimate command in joblist for bat.
139 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
140 really change anything, but is the beginning of doing it *right*.
141 To do it completely right the LastWritten date must be passed to
142 the SD, but it is not yet done.
143 kes Minor tweaks to some bat restore SQL.
144 kes This patch fixes bug #1003 where putting the message output from
145 a Verify job into the catalog results in a recursive loop. The problem
146 seems to show up only with postgresql (to be verified).
147 kes Correct %x to %p in postgresql debug statement.
149 kes Fix bug #942 where lots of emails where generated when the heartbeat
150 interval was low and Bacula wanted a different tape from the one in
153 ebl Add new SD despooling attributes and Dir inserting attributes
154 job status codes in the catalog (Status table).
156 ebl Use qmake-qt4 instead of qmake when available (debian system).
158 kes Add a security warning to src/cats/make_catalog_backup.in indicating
159 that passing the password via the command line (arg 3) is insecure.
160 This responds to bug #990 (it doesn't fix it).
162 kes Set default debug_level to zero. This corrects bugs #991 and #993.
163 kes Fix a crash in bat when it cannot connect to the Director for example
164 if the Director is not running.
165 kes Remove redundant INDEX (JobId) from File table in the trunk.
167 kes Make explicit exception to GPL in LICENSE to permit linking
168 the Win32 FD with Microsoft VSS code.
169 kes Apply the Solaris package patch from
170 Masopust, Christian <christian.masopust@siemens.com>
171 kes Apply the patch to optionally add a timestamp in the debug output
172 submitted by Mariusz Czulada <manieq@wp.eu>.
174 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
175 backend (sql_strerror). Fixes bug #989
177 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
178 It applied with no problems.
179 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
181 kes Redirect stderror to stdin on mt status command in mtx-changer.in
182 since the status is returned on stderr on Solaris.
183 kes Activate Close button on tray-monitor window. This fixes
185 kes Check for NULL item in parse_conf.c before calling it. In the
186 case of Device, there is no item and this caused a seg fault when
187 Device appears in the conf file.
188 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
189 avoids pulling in config.h multiple times in some new code.
191 kes Fix spurious warning message printed when creating a volume with
192 a LabelFormat. This fixes bug #976.
194 Release Version 2.2.5
196 kes Add JobId in place of Job name in all the Jmsg() output.
197 kes Correct the APP_DESC for the Win32 storage service (remove an e).
199 kes Make maxvol-test and new more strict maxvol2-test work.
200 kes Print JobId in all Jmsg() job output.
202 kes Add new SD despooling attributes and Dir inserting attributes
203 job status codes. This fixes bug 961.
204 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
206 kes Fix doc issue. This fixes bug #963.
207 kes Fix listing performance problems in bat. Pointed out by
209 kes Remove old debug code.
210 kes Fix bat code that tests for Win32. This should fix bug #968
211 kes Query 5 list wrong Vol after migration. This fixes bug #960
213 ebl Fix #969 where user can't change Replace option in restore menu.
215 kes Save jcr in thread specific data (tsd) for each thread.
216 kes Make Dmsg() print JobId as -%u.
217 kes Make Jmsg, Emsg, and others automatically pickup the jobid
218 for the thread if it exists.
219 kes Remove old reservation debug jid code.
220 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
221 ebl Add an option that permit to specify spool size in job
222 definition. (Applying patches/testing/spoolsize_per_job.patch).
223 You must upgrade SD and DIR at the same time.
224 dvl Add new configuration item --archivedir
225 dvl Adjust regression tests to use tmp not /tmp. This will allow
226 multiple concurrent runs of the regression tests.
228 kes Fix race condition that drops final block written to volume.
229 This happens in rare cases with multiple simultaneous jobs
230 when the Volume fills. This fixes bug #964. May be related
231 to bug #935 and possibly #903.
232 kes Eliminate more strerror() and replace with bstrerror().
233 kes Remove BSD getopt and replace with unrestricted IBM version.
234 kes Fix Win32 build for changed calling sequences.
235 kes More tweaks to the mount volume routines to get everything
236 right. Changed variable name from find to have_vol, which is
237 much easier to understand.
238 kes Enhance btimer debug code.
240 kes Fix FD->SD authorization failure, which was due to spurious
241 wakeups from a pthread_cond_timedwait(). Simply check the
242 predicate before continuing. This fixes bug #953.
243 kes Add const char where needed (more to do). Remove temp debug code.
245 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
246 kes Don't overwrite error message in check_tables_version.
248 kes Unlock batch insert tables with same calls used elsewhere.
249 kes Allow starting 59 jobs a second.
250 kes Make SD session key more random.
251 kes Add retry for SQLite opening db if it fails. Probably helps
253 kes Suppress extra error messages during batch insert failure.
255 kes Add jcr to timer packets so if killed message can be sent to job.
256 kes Add JobId to all Dmsg() output.
257 kes Put some FD auth code on dbglvl rather than fixed.
258 kes Return insert attributes error message in db msg buffer to avoid
259 false error messages. Helps fix bug #966.
260 kes Separate batch init error messages. Probably helps fix bug #966.
261 kes Make SD code that contructs attribute insert check string lengths
263 kes If Dir gets an error during inserting attributes, cancel SD.
264 This reduces unnecessary error messages.
266 kes Correct search boolean for getting Volume info
267 ebl Cleanup batch insert code. Probably fixes bug #965.
268 kes Back out one small change to the reservation system (reserving a volume).
269 kes Rework how a Volume is mounted. It is now much more intelligent and
270 will always attempt to use any mounted volume if possible and reduces
271 calls to the Director asking about volumes.
273 kes Turn off some code when batch insert not enabled.
274 kes Edit FD name in connect error messages.
275 kes Rework the reservation system to take into account that the Director
276 might give us a Volume that is different from the current one being
277 used, and to ensure that we don't exceed Maximum Volume Jobs.
278 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
279 fatal error with multiple jobs running'
280 kes Add more debug code in reservation system.
281 kes Implement maxvol-test to check bug #947.
283 kes Add code to handle tray monitor separated from Win32 FD.
284 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
286 kes Add missed return in fixing verify bug -- trunk only.
287 ebl Fix a command parser issue causing a director segfault.
288 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
290 kes Increase the max block size to 4MB fixes bug #957.
291 kes ERABT if user sets min block size > max block size. Fixes bug #956.
292 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
293 is not properly mounted (recognized) during a poll.
294 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
295 Job that has differences reports Verify OK.
296 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
298 ebl Add an option to operate on all pools with update vol parameters.
299 This complete the project 20. Patch from Nigel Stepp.
300 ebl Add history support to bconsole when using readline.
301 Using Ctrl-D to exit doesn't update .bconsole_history
302 kes Modify new volume algorithm to use max MediaId for generating next
303 volume number rather than the count of Volumes. This should essentially
304 eliminate the failure rate if some volumes were deleted. Bug #921.
305 kes Begin implemention of Optimize Job Scheduling.
306 kes Implement restore callback that Dirk and I agreed on for bat
307 restore. This fixes bug #928. Restore of backup of zero files fails.
308 kes Fix SQL Catalog logging which broke with new db_escape_string
311 Release Version 2.2.4
313 kes Fix bacula_cats.def for new db_escape_string().
314 kes Increase size of name string when FD making connection to SD.
315 May fix bug #953. FD->SD connection failure.
317 kes Add code to help Dan debug 2drive-incremental-2disk test.
318 kes Add code to try to fix bug #908.
319 kes Add waits to multiple exit detection code to try to force pid
320 file to always be deleted.
321 kes Restore good dev.tar.gz to rescue set appropriate binary property.
323 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
324 trying to switch drives by checking for blocking before unblocking.
326 kes Cancel storage daemon in all cases where FD reports error. This
327 should fix virtually all cases of bug #920.
328 kes Fix db_escape_string() for MySQL which did not compile.
330 kes Fix error message that was clobbered when Dir tells SD it does not
331 have write permission on Volume. This should fix a minor point
332 in bug #942, but not the main problem.
333 kes Add code to cancel job in SD if FD connection fails. This should
335 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
336 dvl Pass jcr and db into db_escape_string() to enable better escaping
338 kes Fix migration code to get correct Volume name with multiple volumes
339 by skipping |. Fixes bug #936.
340 kes Implement patch supplied by Landon to fix bug #944 where using
341 TLS with bconsole uses 99+% of the CPU.
342 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
344 kes Move patches into patches directory.
346 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
349 ebl Using 'm' in bconsole will show messages like before,
350 and not memory usage.
351 kes Fix bug #935, and probably also bug #903 where files were not
352 restored. MediaId was not properly set in JobMedia record after
355 kes Suppress chown and chmod error messages if the FD is not running
358 kes Apply Martin Simmons' patch that should turn off the new API usage
359 when batch insert is turned off allowing building on older
361 kes Add ./configure search in qwt-qt4 for qwt package
363 kes Bacula is now free of 3rd party GPL copyrighted code!
365 kes Add guid_to_name.c/h which replace idcache.
366 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
368 ebl Detect if new PosgreSQL batch insert API is present.
369 kes Correct incorrect mempool call causing Director crash. Occurs on
370 systems without va_copy().
371 sb Update spec files for 2.2.1 release
373 kes Fix memory pool call in ua_output.c. bug #934.
374 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
375 Add test program to fnmatch.c
377 kes Integrate patch to README.vc8 from
378 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
379 edit it to get it into Unix patch format.
380 kes Implement mkpath.c to replace old FSF makepath.c
382 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
384 Release Version 2.2.1
386 kes Update POTFILES.in
387 kes Cleanup a few underquoted AC_DEFUNs in configure
388 kes Apply patch from Martin Simmons that adds a test for va_copy to
391 kes Fix bug #921 by increasing the number of tries to create a new volume
393 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
394 can be called multiple times. Implement a version for machines
395 without va_copy() that gets a big buffer.
397 kes Integrate more portable zone offset code into bsmtp.c
398 Submitted by Attila Fülöp.
400 kes Fix bad SD->FD return status reported by
401 (James Harper) <james.harper@bendigoit.com.au>
402 ebl Fix a bug in read_close_session which return random status
403 thanks to James Harper
405 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
406 and directory names during restore of single file/directories.
407 kes Add sanity checks to .sql command when string is empty. Hopefully
408 that will resolve Dirks Director crash.
410 kes Apply patch submitted by Martin Simmons that corrects a seg fault
411 in the bsmtp chat subroutine when debug is >= 10.
413 kes Fix Director crash when running bat SQL queries.
414 kes Add David's notes on Item 8: Copy pools.
416 kes Rework projects file to be current and ready for a vote.
417 kes Enhance lex scanner error message.
419 kes Tweak LICENSE file to mention BSD code.
420 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
421 if specified on the ./configure.
422 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
423 This class is intended to allow us to open a second bsock to the
424 Director while in the restore subdialog.
426 kes Fix configure to create bat Makefile before creating dependencies.
427 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
428 kes Add a tooltip to the tray monitor.
429 dvl Set the Director's PID file before dropping privs. This fixes
432 kes Update AUTHORs file
433 kes Increase the default max concurrent jobs to 20 in FD and SD to
434 correspond with the default .conf files.
435 kes Rewrite the Win32 service routines. This eliminates the 3 copies
436 some different, of the same file created by RN when porting the
438 kes Rearrange some of the Win32 directories and the placement of the files
440 kes Set DEVELOPER flag in version.h
442 ========================================================================
443 Release Version 2.2.0
445 kes Apply a second doc patch from Marc.
446 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
447 improves the tips section that discusses how to setup multiple
450 kes Update bat README file.
451 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
452 corrects a typo in the Recycle status check in db_find_next_volume().
453 This will probably fix a number of annoying problems with multiple
455 kes Modify most of dird/msgchan.c to use bsock class calls rather than
456 bnet calls -- no functionality change.
458 kes Modify the Verify output to specify if files are missing on
459 the Volume(s) or disk. Fixes confusion in bug #916.
460 kes When more than one Volume is read in a migration job, the last
461 Volume bytes reported are from the last read volume rather than
462 the last written volume. Fixed. This fixes bug #910.
463 kes Fix display of Recycle flag after update volume=foo recycle=yes.
464 It previously printed New Recyle flag is: no. This fixes bug
467 kes Correct seg fault when switching tape drives during restore.
468 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
469 be used until after 2.2.0 release.
471 kes Remove fnmatch() in SD that permitted wild card specifications.
474 kes Fix %g in filename returned by SQL for browse tree reported by
476 kes Fix configure so that it puts config.out in the cwd rather than
478 kes Attempt to fix the locking problem reported by Eric in bug #906.
479 kes Make berrno class to leave errno unchanged after constructor call.
480 kes Make bnet_server use the heap rather than the stack to allocate
481 its socket fd pointers to avoid a crash at termination. Problem
482 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
484 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
485 and putting it in depkgs-qt along with Qt4.3.
487 kes Rework code in acquire.c that switches drives for reading when
488 the Media Type does not match. This should fix bug #906
490 ebl Fix a director segfault during job setup #907
491 kes Correct seg fault in postgresql when first operation returns no
492 rows. Fixes Dirks File browser problem seg fault with bat.
494 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
495 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
498 kes Implement PopUp YES/NO dialog for bat.
500 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
502 kes Correct RunScript to terminate job in FD on failure.
503 kes Change abort_on_error and AbortJobOnError to fail_on_error
504 and FailJobOnError in RunScripts.
505 kes Minor tweaks of code formating in RunScripts, principally to
506 avoid depassing 80 columns.
508 kes Eliminate one #ifdef Win32 in bsmtp
509 kes Implement grow tool to grow a file for testing very large databases.
510 kes Add big-vol-test to test Bacula seeking with > 5GB.
513 kes Modify find_next_volume() to return all values in Media record.
514 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
518 kes Update Release notes
520 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
521 Warning, in previous beta version, all media get from scratch keep their
524 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
525 This should fix bug #842. Made a note to look at removing the temp
526 files at the end of the install.
527 kes Add ability to mount and unmount a file device providing it is
528 marked as being removable and has the appropriate mount and unmount
529 commands defined in the Device resource. This fixes bug #830.
530 kes When applying a storage override, release all previous storage
531 definitions rather than just prepending the new storage.
532 This should prevent a good deal of confusion.
534 kes Implement ./configure search for qwt libraries.
536 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
537 Win32 FD. This should fix bug #893.
538 kes Remove an unnecessary beep in Win32 init code.
539 kes Update copyright dates in Win32 executable about boxes.
540 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
541 code with a BSD getopt.c and getopt.h.
542 kes Remove sched.h from the Win32 compat directory -- not used.
543 kes Remove the Exit menu item from the Win32 tray monitor. If you really
544 need to shut it down, do it through the services panel or the command
546 kes Remove some inappropriate Bacula FSFE copyrights.
547 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
548 kes Fix regress config non-portable test as pointed out by
549 Florian Heigl <florian.heigl@gmail.com>
550 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
551 as pointed out by Florian Heigl <florian.heigl@gmail.com>
553 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
554 Reported by Frank Sweetser.
558 kes Fix client-only build.
559 kes Integrate client-only fixes for bsys (initgroups) and conio from
560 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
561 kes Make arguments to get_scratch_volume() in same order as other
563 kes Rework the prune_volumes() subroutine so that after purging and
564 no volume found in desired pool, it will check for a scratch
565 volume. This prevents recycling the whole scratch pool.
566 kes Add code to status storage to print boffset_t (largefile support).
568 kes Move qwt (Graphics libarary for Qt4) to depkgs.
569 kes You now need a --with-qwt=<dir> to be able to build bat.
570 kes Update src/win32/cats/bacula_cats.def to include the new
571 db_get_query_dbids() call on Win32.
573 kes Correct a problem when selecting a scratch volume and moving
574 it to another pool that lost some columns.
575 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
576 kes Enhance Autochanger error messages to include Volume and device name.
577 kes Rework prune_volumes() code to take account of InChanger flag,
578 and to handle recycling volumes going to the Scratch pool and
579 current pool because the RecyclePool directive.
580 kes Implement a better and more efficient db_get_query_dbids() to
581 handle creating and passing back a list of DBIds.
585 kes Start work on new more efficient DBId subroutine. First use
586 will be for recycling volume to Scratch inchanger.
587 kes Increase number of JobIds in pruning from 1000 to 10000.
588 This to be replaced by above routine.
589 kes Begin implementation of building Qt4 on Win32.
590 kes Correct typo in fix I added for bad TLS shutdown.
591 kes Pull 2.0.3 patches into patches directory.
592 kes Update Release notes. Include qt-console in line count.
593 kes Update Projects file.
595 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
596 bug in migration code where a job that spanned two volumes
599 kes Implement new BST_DESPOOLING blocked state. Change from locking
600 during despooling in SD to blocking. This means that other threads
601 can work with the device structure, in particular the reservations
602 system while despooling.
604 kes Fix return in reservation message queue that missed clearing
605 the jcr lock (implemented 26Jun07 below).
606 kes Rename a number of dev methods to make locking function names
608 kes Document locking in lock.c. Move lock structures to new file
611 kes Move reservations message lock to lock jcr only this
613 kes Move main SD locking code into lock.c (new file).
614 kes Update Win32 build to include lock.c
618 kes Dirk committed the qwt library code for drawing graphs in bat.
619 kes Tweak install of qwt so that it is integrated with ./configure.
621 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
622 out by Eric (my typo).
623 ebl Fix configure.in to get batch mode enable
624 kes Return correct string from authenticate.cpp in bat when connecting
626 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
627 spurious line drops when using TLS.
628 kes Do not file reparse points when restoring a file that already
631 kes Implement Windows reparse points -- similar to directories, but
632 we do not descend into it. This is a first cut. They seem to
633 be backed up, but restore is not yet tested.
634 kes Remove restore_blocking in tls code when shutting a socket to leave
635 it in blocking mode. Hopefully this will fix the encryption bug
636 reported by Frank Sweetser.
637 kes When opening a file for backup, tell the OS that we are going to
638 read it sequentially -- optimization.
639 kes Change variable names in authenticate_director() to not conflict
640 with member names in bat. Caused great confusion with compiler,
643 kes Queue openssl error messages in case of comm problem.
644 kes Do shutdown() call if socket terminated.
645 kes Remove some duplicated code in tls.c
646 kes Move more of the bsock member variables into private and access
648 kes Add Frank Sweetser's tls-test to the regression suite.
650 kes Add Swedish sv.po file
652 kes Don't print clock skew message in FD if less than 3 seconds diff.
653 kes Add a bit of VSS info to status client.
654 kes Implement a first cut of Vista VSS, using Win2003 code.
658 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
659 loaded tape but uses first drive).
660 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
661 This was indeed a Win32 issue.
663 kes Simplify search of autochanger for in-use Volume.
664 kes Fix exit condition of check for in-use volume. kes Remove
665 inappropriate my_postgresql_free_result() in db_close()
667 kes Fix bad return in FD when encryption signature not found.
668 Probably caused a crash.
669 kes Inhibit missing encryption signature error messages for
670 file types where no signature computed.
671 kes Correct inverted check on autochanger in reservation system.
672 kes Tweak debug code in autochanger reservation.
674 kes Add some additional locking in the cats directory in subroutines
675 that modify packet variables called from batch insert.
676 kes Rework how dcrs are allocated. new_dcr() can now be called
677 with an existing pointer, and it will simply clean it up.
678 This allows the reservation system to test various different
679 devices, and will permit easy device changes.
680 kes A bunch of changes all over to handle new new_dcr() calling
682 kes Work more on the Volume management in the SD. Remember Volumes
683 for tape drives and for autochangers (even virtual disk changers).
684 kes When looking at the Volume list to reserve a drive, handle
685 autochanger names correctly by interating through the changer
686 devices. Also call the Director to see if a Volume is suitable
688 kes Fix some bugs in bscan. Make sure all media records are written.
689 Make sure that valid JobMedia records are written for disk files.
690 Previously they were completely wrong.
691 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
692 that the URLs don't change and so that the developers will all
693 work off the same copy. Rebuild from scrach.
694 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
698 kes Fix seg fault in FD from incorrect digest size.
699 kes Fix argument to non-OpenSSL crypto.c subroutine.
703 kes Remove a few malloc()s from the encryption code.
704 kes Use the class calls to bsock in filed/backup.c and restore.c in
705 place of the old bnet_xxx code.
706 kes Implement code that does an on the fly calculation of the
707 signing digest during restore of encrypted files. It makes
708 a best guess at the algorithm, and if it is not correct, will
709 then revert to the old code which reads the file after it is
711 kes Implement at least one missing crypto stream in stream_to_ascii()
712 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
713 #877 where a reload with bad syntax causes Dir to exit.
715 Cut: 2.1.14 beta (not released)
717 kes Do not free a volume on a tape drive until another volume is
718 mounted and read, or the autochanger unloads the volume.
719 This should help the SD re-use volumes that are already mounted,
720 and should fix bug #886.
721 kes Apply patch from user brettedgar that allows gnome2-console include
722 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
723 kes Apply patch from Lucien Weller that fixes day of week calculation
724 because of DST flag problem. Fixes bug #887.
726 kes Move find_next_appendable_volume() to after acquiring a valid device
727 in reserve.c. This fixes bug #864 -- confirmed by reporter.
729 kes Unable to reproduce bug 872. However added additional testing for
731 kes Bug #874 resolved by documenting SQLite limitations.
732 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
733 kes Bug #881 resolved by removing typo in mtx-changer script.
734 kes Made Frank Sweetser's wiki the official Bacula wiki with his
735 approval. Added a link to the wiki on the web page, and implemented
736 a backup from http://paramount.ind.wpi.edu
738 kes Fix update allfrompool to pass pool name.
740 kes Convert to pure GPL v2 license.
741 kes Fix sscanf problems reported by Peter Buschman that caused
742 a bus error on Solaris.
743 kes Rework (simplify) the select prompt in bat.
744 kes Move get_jobid_from_tid() into lib and create a
746 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
747 should definitely fix the problem of lost error messages in the
749 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
750 kes Eliminate tcpd.h from the project. Enclose the #include from the
751 library with extern C ...
752 kes Add print of signal name when a signal is trapped.
756 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
758 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
759 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
760 makes SQLit3 run 30 times faster, though a bit less safe.
761 kes Implement --with-batch-insert in configure and detection of thread
762 safe libraries. It is on by default, but turned off if no thread
763 safe library (e.g. SQLite 2) is available.
765 kes Fix Bacula PostgreSQL buffer overruns.
766 kes Do better checking for NULL results returned from PostgreSQL;
767 implement retry for failed queries; clear results buffer after
768 failed query. Hopefully this will correct the PostgreSQL failures.
770 kes Implement algorithm to handle only one appendable volume with
771 Prefer Mounted Volumes = no.
772 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
773 returned from a query.
774 kes Make volume lock recursive.
775 kes Implement an additional volume reservation algorithm that
776 starts by considering all reserved volumes then uses the
777 old brute force algorithm of searching the resources to
778 find a suitable device.
779 kes Add new reservations debug code and refine the old code.
780 kes Update the win32/dll/bacula.defs file.
782 kes Tweak reservations algorithm to permit a few more cases, i.e.
783 volume reserved, but on different drive, ...
784 kes Enhance SD status to include Pool and Media Type for drive in a
785 more readable format (a bit longer).
786 kes Fix PostgreSQL double free.
788 kes Minor refactoring of restore decryption code.
789 kes Add code to smartall.c to detect double free of a buffer.
791 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
792 so that bsmtp will create a correct email address (mailbox only).
793 kes Modify 'memory' command so that the buffers are listed as 'In use'
794 to avoid confusion with Orphaned buffers.
795 kes I reworked the OpenSSL include/lib flags to be handled in
796 the standard Bacula way, which should fix bug #863 concerning
797 non-standard OpenSSL libraries.
799 kes Implement Help Browser window for bat.
800 kes Fix reload bug that reset StorageId to zero.
802 kes Fix TLS #ifdefing when TLS turned off.
803 kes Ensure that when labelling a tape with Slot=0 that InChanger
805 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
807 kes Add StartTime to final uar_sel_jobid_temp query so that we can
808 add DISTINCT (required by PostgreSQL).
809 kes Implement BSOCK authenticate_director() method. Eventually will
810 authenicate all daemons.
811 kes Move several more functions into the BSOCK class.
813 kes Add code to tell the OS that we no longer need a cached
814 file that we were reading. In findlib/bfile.c. Also,
815 only cache files that we are reading. Thanks to
816 Tobias Oetiker <tobi@oetiker.ch> for the idea.
817 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
818 kes Implement script to automatically generate cats and dll .def
820 kes Update README.mingw32 to include new .def file generation.
821 kes Correct typo in UTF-8 error message as reported by:
822 jhernandez <julianhernandez@gmail.com>
823 kes Add additional sm_check() code on debug level 1.
824 kes Set default debug level to 1.
825 kes Trap SIGABRT in attempt to get traceback.
827 kes Reduce bat connect timeout from 30 to 15 seconds.
828 kes More restructuring and implementing BSOCK class in place of
830 kes Remove a few unnecessary malloc() tests in crypto code.
831 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
832 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
833 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
835 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
837 kes Fix Verify InitCatalog. The attributes were not pointing to the
838 correct saved location.
839 kes Implement message callback so that GUI is sure to get all
840 daemon messages. Currently displayed in a dialog in bat.
841 kes Ignore SIGUSR2 (Bacula timer) in bat.
842 kes Apply regress patch from bug #859 to allow regress to work
843 with Solaris compiler.
845 kes Begin adding TLS support to bat.
846 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
847 clean up lex.c and make it more readable.
849 kes Move more bnet functions into the BSOCK class.
850 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
851 kes Complete change of berrno strerror() method to bstrerror()
855 kes Cleanup incorrect email addresses in bsmtp.
856 kes Make bat display initial messages rather than discard them.
858 kes First cut of adding .mod to the run command.
859 kes Implement auto display of messages in bat.
860 kes Enhanced preferences to allow all Bacula output to be
863 kes Try to make bsmtp date routines more generic.
864 kes Fixed bug #856 autochanger documentation.
865 kes Rework bsmtp date editing for Win32. This fixes bug #854.
866 kes Add new cats entry point so Win32 builds.
868 kes Attempt to fix bsmtp date editing on OSes without %z editing.
870 kes Do better checking for the MySQL 64 bit libraries looking for both
871 .a and .so libraries.
872 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
873 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
874 kes Require the thread safe version of MySQL during configure. Thanks
875 to Andre Noll for pointing this out.
876 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
877 continuing in migration code.
878 kes Apply implementation of tray-monitor font derived from gnome-console
879 submitted by Andreas Piesk <a.piesk@gmx.net>
881 kes Eliminate important memory loss in SQLite
882 kes Fixed the batch insert MySQL thread specific data that was not
883 being freed. See cats/mysql.c:db_thread_cleanup().
884 kes Fix restore before command.
885 kes Convert old hdr.name to name() in a few places.
886 kes Implement update jobid command.
887 kes Return all time_t dates in db_get_job_record()
888 kes Stop watchdog in SD earlier.
889 kes Put Pool just after Storage in please mount message.
890 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
893 kes Update the po files.
894 kes Fix Verify InitCatalog by making it cache attributes.
896 kes Change name bacula-bat to bat for man 1 page to correspond to
898 kes Check for client and store NULL pointers in status command. This
900 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
901 kes Fix sign extended editing of %p.
902 kes Clean out a little old #ifdefing in cats/mysql.c
904 kes If time diff between DIR and FD is more than 600 seconds convert
905 INFO message to WARNING.
906 kes Implement heap size display in status for all daemons.
907 kes Attempt to fix MySQL db open memory loss (not successfull).
908 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
909 kes Eliminate memory loss in MySQL (possibly other SQLs) during
910 Query. This looks like a MySQL but but by doing extra releases,
911 the memory goes away. This should fix bug #847.
913 kes When backup fails, cancel SD before waiting for sd termination.
914 kes If SD is waiting for FD to connect during cancel, wake up the
916 kes Fix fsf code so that errno is correctly reported.
917 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
919 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
920 so that Bacula doesn't later stumble into a seg fault.
921 kes Use the term Restore Client in the restore Job report.
922 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
923 the original job's FileSetId.
924 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
925 spooling in migration jobs. Not yet tested.
926 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
927 reading conf file from a pipe. However, do it with open_bpipe()
928 rather than popen. Not yet tested.
930 kes Fix an ugly bug where the VolCatBytes were getting updated
932 kes Implement bconsole memory command that prints current memory
933 usage, plus smartalloc dump.
934 kes Clarify some error messages in backup, admin, and migrate.
935 kes Shrink label dialog to smaller size.
936 kes Invert Cancel OK buttons on restore to be OK Cancel.
937 kes More strerror() to bstrerror() conversions.
939 kes Start implementing bstrerror() in place of strerror().
940 kes Stripping path -- seems to work.
942 kes Prevent door and port files from being restored (mostly
944 kes Free an unreleased buffer in compat code.
945 kes Change console Job name from *Console* to -Console- to eliminate
946 Win32 filename problems. Put Win32 path separator when creating
947 Console file. This fixes bug #846.
948 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
950 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
952 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
953 to force Win32 error message.
955 kes First cut strip path. The data should be passed to the FD,
956 but nothing is done with it yet.
957 kes Enhance the digest and signature routines in the crypto
958 library to accept a JCR and to use it to print error messages
959 so that they will go in the Job report rather than the daemon's
961 kes Simplify some of the verify signature code.
962 kes Simplify a few of the alternative returns in the signature
965 ebl Use only POSIX regex instead of GNU regex in breg.c for
966 File relocation. It fix broken freebsd compilation.
967 kes Convert all other Dir files to use new ua class message
969 kes Tentative fix for missing digest signature in bug 807.
970 kes Correct handle problem in new win32_ftruncate routine.
971 kes Convert ua_purge.c and ua_update.c to use new ua class
972 message routines for bat.
974 kes Correct incorrect installation of LICENSE in Win32 installer.
975 kes Display LICENSE at the beginning of the Win32 install.
976 kes Attempt to correct the need for the png files to be installed
978 kes Reapply my bat.conf install script in qt-console. I think I
979 editted bat.pro instead of bat.pro.in and it was lost.
980 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
981 the /var/lock/subsys for subsysdir. Also corrects typos in the
984 kes First cut update job.
985 kes Correct configure to include qmake of src/qt-console directory.
987 kes Make restore job yes/mod/no print in one command so GUI works.
988 kes First cut implementing backup and restore client.
989 kes Correct editing in Verify output that caused a seg fault.
991 kes Insure that bat.conf is not overwritten during installation.
992 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
993 while I was implementing migration in March 2006 !
995 ebl Cleanup file relocation, using char *RegexWhere instead of
996 char *where + bool where_use_regexp
997 kes Update some manpages and add bat manpage.
998 kes Make a first cut at converting bacula.spec.in for bwx-console
1000 kes Apply patch from John Goerzen to add hostname as fourth argument
1001 to make_catalog_backup script.
1002 kes Fix typos I introduced into bsmtp.c
1003 kes Make pm_strxxx() routines handle input of NULL pointer. This
1004 is to protect from NULL pointers returned from SQL databases.
1005 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1006 kes Add more debug to FIFO code -- fix fifo regression test.
1008 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1009 kes Add thread timer to bnet_connect() to break from OS if wait time
1012 kes Update Win32 build to include new files, new symbols, and
1014 kes Implement socket level heartbeat (tcp_keepidle)
1015 ebl Commit File relocation patch
1016 kes Make bat have 'make install' target.
1017 kes Warn during install if old gnome-console binary found.
1018 kes Warn during install if old wx-console binary found.
1019 kes Add -8 option to bsmtp command line to add content type utf-8.
1020 Fixes bug #809. (Character coding problem in bsmtp).
1021 kes If < is found in target (from, to, cc) then do not enclose the
1022 target in < > in bsmtp. Fixes bug #772 (malformed address).
1023 kes When printing certain items in dbcheck, stop after 300000.
1024 Fixes bug #822. (dbcheck loops).
1025 kes Incorrect status in Dir after waiting for mount with poll set.
1028 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1030 kes Print waiting to reserve a device every 5 mins.
1032 kes Don't call close_part in label.c if tape and relabel.
1033 kes Don't free volume if busy in close() -- should help with
1035 ebl Fix #824 RunScript bug (After script could be execute twice)
1036 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1037 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1038 Add a regression script to test RunScript
1040 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1043 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1044 deprecated. No additional bugs will be fixed, and they will be dropped
1045 in a future release (probably 2.4.0).
1046 kes Change name of wx-console to bwx-console to make it more Bacula
1048 kes Change the name of gnome-console to bgnome-console to make it
1051 kes Some time in March, a Feature Request with patch from Jorj Bauer
1052 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1054 The ability for the director to validate a Client (FD) CN against
1055 an arbitrary set of patterns rather than the hostname, with
1056 A new 'TLS Allowed CN' set of directives which are implemented
1057 in the Client resource. Then pattern matching is used in place
1058 of hostname matching against the Certificate's CN. As an example, we
1059 have certificates which (a) use a local CA, and (b) have a CN of the
1061 kes Add new/changed entry points to Win32 build
1062 kes Create unaccepted-projects for projects that are not accepted.
1063 kes Simplify locking in the reservations system.
1064 kes Add more debug code in reservations.
1065 kes Make sure error condition on reserving a volume is handled correctly.
1066 kes Correct handling of volume_in_use.
1067 kes Correct handling of initializing a device.
1068 kes Move handling of broadcasting releasing a device into release_device().
1069 kes Correct attaching dcr to dev so that it is only done if device
1070 is properly initiated.
1072 kes Locking debug level tweaks in SD.
1073 kes Tweak new Volume code.
1075 kes Add exec external-command [wait-seconds] to bconsole. This
1076 executes the external-command. Note! normally external-command
1077 should be enclosed in double quotes.
1078 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1079 it should normally be off in a production system.
1081 kes Implement die command for SD so that we can force it to dump.
1082 kes Implement SD lock debug code.
1083 kes Implement new algorithm for keeping Volume list in SD. It
1084 is now owned by the device.
1086 kes Implement new code for freeing in use volumes that should
1087 resolve if not all, some of the problems of multiple drive
1088 tape conflicts described in bug 801.
1090 kes Fix gui/bacula-web/images files in svn.
1091 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1093 ebl Fix a bug in batch mode (in string escape)
1094 kes Correct migration prune SQL typo that crept in in a
1095 recent 2.1.x change.
1097 kes Move bnet_despool() into class in bsock.c
1098 kes Modify job report to include director name and Build OS.
1099 kes Move drop root privilege and check_catalog() before fork.
1100 kes Add update database scripts (version 9 to 10) to updatedb directory.
1102 ebl Check size and age of each file after its backup to see if
1103 it has changed during backup, if 'checkfilechanges' is set.
1104 The FD will do an extra check (stat(2)) after
1105 each file backup. mtime, ctime and size are compared with
1106 'before backup' information. If time or size mismatch, an
1107 error message will be generated. You must upgrade FD to use it.
1109 kes Make database name and user configurable
1110 --with-db-name=xxx --with-db-user=xxx
1111 kes Add back database type to message.c for debugging.
1113 kes Implement dir_sql() which issues an SQL query.
1114 kes Modify bat medialist to use dir_sql() and do some minor C++
1115 formatting as well as eliminating a number of pointers, simplifing
1118 kes Fix some of the mtx-changer grep commands for tape label readers.
1119 kes Convert a number of bsendmsg into the appropriate send/warning/error
1120 message class calls.
1121 kes Suppress the using database message in the .sql command.
1122 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1124 kes Add context menu for floating a window.
1125 kes Some minor cleanup and name changes in qt-console
1126 kes Add doing mt setblk 0 in Win32 mtx-changer.
1127 kes Apply Martin's bug fix to move definition of ENODATA for
1129 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1130 sqlite2 and sqlite3.
1132 kes More pruning cleanup.
1133 kes Turn on wait_for_drive by default in mtx-changer.
1134 kes Turn on Batch insert code by default as it now passes regression.
1135 kes Add ./configure --enable-bat to enable building of Bat.
1136 No install yet though.
1138 kes Implement a new .sql command for bat.
1139 kes Implement code to turn off pruning in obtaining the next volume.
1140 Pruning is turned off for the status dir command, but turned on
1141 for SD requests and for the list nextvolume command.
1143 kes Correct Qmsg() that was not updated correctly when committing a
1144 previous change (probably the recent TLS patch).
1146 kes Write new subroutine is_volume_purged() that explicitly checks
1147 if the Volume is purged, and if so marks it as such. This should
1148 resolve problems reported about needing to mount twice to recycle
1150 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1151 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1152 amount of duplicated code.
1153 kes Do volume pruning only for the Media Type desired (reduces pruning time
1154 if multiple Media Types are in the same pool).
1155 kes Implement more detailed info in the Job report for the Bacula version
1157 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1159 ebl Add bbatch tool to bench database and insert mode.
1160 Fix sql quote stuff in batch mode
1161 Fix sql stuff for mysql
1163 kes Correct problems with am/pm scheduling. Fixes bug #808.
1164 kes Implement new prunning code that prunes up to 1000 jobs at
1165 the same time. The same technique can be applied to a number
1166 of other prune/purge subroutines.
1167 kes Add an insanity check when starting a new tape job to ensure
1168 that the tape position has not been changed. If so fail the
1170 kes Fix Win32 build for dlls to add the folllowing:
1171 src/lib/bsock.c -- new file with new entry points
1172 src/lib/dlist.c -- new entry points
1173 src/cats/sql_create.c -- new entry point
1174 src/cats/sql_cmds.c -- new DATA item exported
1176 ebl batch mode cleanup bscan-test is ok now.
1177 kes Implement SD code to check length of disk volume before appending.
1179 kes Correct return status on db_batch... routines.
1180 kes Add call to db_write_batch_file_records() to migration code.
1181 ebl Fix AfterJob timing
1182 kes Move the checking of the database in initializion of the Director
1183 to after we drop privileges. This avoids the need for both root
1184 and bacula access to the DB.
1185 kes Correct a misplaced variable definition in src/filed/backup.c
1186 kes Correct how the new batch insert db_create_attributes_record()
1187 uses the arguments. Caused a seg fault in bscan.
1188 kes Implement lock() and unlock() methods in DEVICE class.
1189 Implement block() and set_block(xx) methods in DEVICE class.
1190 kes Modify bnet_connect() so that it uses time() to check for the
1191 wait time expiring (on some OSes, some system calls may not
1192 return immediately).
1193 kes Modify Verify to obtain the previous JobId when it is actually
1194 running rather than at schedule time (as it was in 1.38.x).
1195 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1197 kes When checking pid in pid file, continue running if the pid is
1198 the same as ours. This occurs on IRIX after a system crash.
1201 kes Extend new GUI API.
1202 kes Make the ua structure a class, and implement send_msg(),
1203 error_msg(), warning_msg(), and info_msg().
1205 kes Apply fix from for building wx-console on the Mac from
1207 kes Implement new select mechanism for GUI programs.
1208 kes Reorganize initialization of stackedWidgets in bat.
1210 kes Add updated nagios plugin supplied by Christian Masopust.
1212 kes More bat implementation.
1213 kes File migrate bug with Pool Occupancy using mediaid instead
1214 of jobids. Fixes bug #795.
1215 kes Fix orphaned buffers in filed backup and verify due to
1216 crypto buffers not freed during errors. Fixes bug #789.
1217 kes Extend new GUI api code to tree commands.
1218 kes Ensure that tree and dot commands check console ACLs.
1219 kes Permit marking directory with trailing slash.
1220 kes Allow 20 console connections (instead of only 10).
1222 kes Add smartctl call to bacula-sd.conf as an example of getting
1225 kes Modify jobq.c to let simultaneous restore jobs run. This may
1226 cause them to fail if they cannot get a drive.
1227 kes Add Client Connect Wait to Storage daemon to permit users to
1228 modify the time the SD waits for a FD connection.
1230 kes Correct virtual changer check which was backwards. This caused
1231 volumes to be unloaded into slots already occupied.
1233 kes Apply Command ACL filter to JobId list in restore command.
1234 kes Correct typeo in var.c patch.
1236 kes Don't let Bacula prune File or Job records for the current Job.
1237 kes Fix variable substitution pad + inc bug reported (with patch)
1240 kes Correct SQLite log table index as reported by Luca Berra.
1242 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1244 kes Begin implementing new comm signals for API.
1245 kes Fix a few places in lib/message.c where the open fd may
1247 kes Continue implementing lib/bsock.c (real class). Make jcr,
1248 who, host, and port private. There are new methods to access
1249 them for non-class use. This required touching a number of files.
1251 kes Add LANG=C to autoconf/randpass so it works with languages other
1252 than English. Fixes bug #788.
1254 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1256 You will not be able to generate Include/Exclude list any more.
1257 It will be fixed soon.
1258 If you want to use this, you can apply
1259 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1261 kes Restore of sockets created false error messages because Bacula
1262 no longer restores sockets, but the code was still trying to
1263 set the attributes on a non-existent file. Reported by a user.
1264 ebl finish RecyclePool feature
1265 Media will takes Pool.RecyclePool
1266 when moving from Scratch to a Pool or when user will do
1267 update volume=xxx frompool
1268 To use it, add RecyclePool = aPool to your Pool resource
1271 RecyclePool = Scratch
1275 kes Expand new BSOCK class adding signal() and new BNET signals.
1276 kes Begin enhancing the dot commands adding a new API function
1277 that returns more information and will make it easier
1278 to interface to the Director from a program.
1280 kes Make DEVICE fd private. Its new name is m_fd, and can be
1281 obtained with dev->fd() outside the class. This is the
1282 first of many DEVICE members to be made private.
1283 kes Implement Michael Renner's idea on having a virtual disk
1284 changer. I made some minor modifications (e.g. I did not
1285 implement the Virtual Changer directive, but simply set
1286 the Changer Command to an empty string.
1288 kes Implement a BSOCK send() method that writes the whole record
1289 in a single write() request rather than in two.
1290 ebl add update volume=xxx recyclepool=yyyy
1291 volume takes recyclepool from pool when using update volume=xxx from pool
1293 kes Fix encryption deblocking bug, which caused some restored files
1294 to be truncated. This fixes bug #763.
1295 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1296 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1298 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1299 ebl Use btime_t instead of uint64_t in media patch.
1301 kes Optimize the use of the database a bit in the Status dir command.
1302 Only open it when needed, ensure that if any previous database
1303 was opened, it is closed.
1305 kes Correct VolCatBytes bug from media patch.
1306 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1307 in the case of orphaned records.
1308 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1309 and File records in 300K chunks to be more efficient. This
1310 idea came from Juan Luis Frances (if I remember right).
1311 kes Apply Eric's scratch patch that moves a purged Volume to
1312 the RecyclePool. Question: how is RecyclePool set? what
1313 happens to the ScratchPool?
1314 kes Apply Eric's media patch that collects read/write media
1315 times as well as byte counts. This patch requires a
1316 simultaneous upgrade of the DIR and SD. Note, there
1317 should be some way to turn off timing. I'm not sure
1318 times are in Bacula units.
1319 kes Apply Eric's batch-insert patch.
1321 kes Update projects list.
1323 kes Implement Include/Exclude file lists in FD as dlists using
1324 the new dlistString class. This permits efficiently having
1325 large include/exclude lists and completes project Item 25.
1326 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1327 console is authorized to cancel the job. This fixes bug
1329 kes Modify SD so that the VolCatJobs medium record is updated
1330 at the beginning of a Job rather than the end. This
1331 fixes bug #775 where exceeding MaxVolJobs caused jobs
1333 kes Added a mutex around getting and setting Volume information
1334 so that multiple simultaneous jobs will single thread.
1336 Switch to using Subversion
1337 kes Remove src/pygtk-console/ from configure
1339 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1340 plus the entrypoints.
1341 kes Apply patch supplied that corrects debug print
1342 in canceling jobs for max run time. Supplied as
1343 part of bug #621, which was previously fixed.
1345 kes Test on job_canceled() and sd_msg_thread_done inside
1346 loop starting the message thread to avoid a race condition.
1348 kes Remove rl_catch_signal from console.c as it conflicted
1349 with the header definition. Fixes bug #765.
1350 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1352 kes Clarify some stored/acquire messages to indicate if the
1353 problem is with read or append.
1355 kes Fix memory leak with storage ids in cats/sql_get.c
1356 kes Terminate watchdog earlier to avoid reference to released
1357 memory -- reported by Jason Austin.
1358 kes Move closing the database from jobq.c to the director daemon
1359 termination routine. This fixes memory leaks for shadow jobs
1360 (i.e. migration jobs).
1361 kes Free up the unique jobid chain items in migrate.c. This fixes
1362 a memory leak problem.
1363 kes Convert some ugly looking for statements to use foreach_alist
1364 in findlib/find.c. This will facilitate converting the structures
1365 to use dlist (for large include/exclude lists).
1366 kes Fix a bug in the btree.c and btree.h routines, then rename them
1367 rblist and add them to be built in src/lib. Include some new
1368 methods written by Rudolf Cejka that make the code more readable
1369 (hides some of the ugly casting).
1370 kes Add set_next() and set_prev() methods which make the code much more
1371 readable. Also add a new dlistString class that facilitates storing
1372 strings in dlists. To be used in the large include/exclude lists.
1373 kes Make some trivial modifications to lib/tree.h that use rblist
1374 rather than dlist for storing the tree links. This was suggested
1375 by Rudolf Cejka. The result of this is that the restore tree now
1376 uses red-black binary trees rather than simple linked lists. This
1377 should give rather dramatic speed improvements for directories
1378 contining large numbers of directories/files (more than 10000).
1380 kes Fix maxruntime bug #621.
1382 ebl Implement the include JobID in spool file name project.
1383 kes Reorder projects file in order determined by Jan 2007 vote.
1384 kes Implement item #12 on project list -- quick release of FD by
1386 kes Fix open of SQLite3 db where user does not have write permission
1387 so that DIR does not crash. Fixes bug #761.
1389 kes Add back missing @ in Win32 Makefile.
1390 kes Change 'Device not configured to autolabel' from INFO
1392 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1393 which should restart an indefinite # of times.
1394 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1395 other DIR specifications.
1397 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1398 Fix path quoting in SQLite scripts.
1399 Fix problems with SHGetFolderPath.
1401 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1403 kes Fix Job restart on error bug that promotes an Inc to a Full
1404 backup. This should fix bug #755.
1405 kes Add qt-console and first cut of code.
1409 kes Fix Bacula->Documentation link on Win32 to point to index.html
1410 instead of bacula.html. Fixed bug #750.
1411 kes Return JobId in db_get_job_record() when JobId==0. This should
1413 kes Do not release source pointers when restarting a failed job.
1415 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1416 This *should* fix bug #747.
1417 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1420 kes Modify USTORE constructor to set an empty store_source string,
1421 and don't copy the store_source string in a cancel. Hopefully
1422 this will fix Arno's seg fault, bug #744.
1423 kes Add back code to disable conio in configure. Fixes bug #743.
1424 kes Correct the Options scanner in the FD to correctly handle
1425 SHA1 option, which was eating the next option. Reported by
1427 kes Add code to indicate when the SD is spooling, spool wait, and
1428 despooling as requested by Alan Brown.
1430 Version 2.0.0 released: 4 January 2007