1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
29 that implements multiple commands per line in the console when using
30 readline. Modify the default to use a semicolon as the command separator.
32 ebl Fix SQL query in migration code.
33 ebl Make accurate mode with hash disk pass regression tests
35 ebl Implement first cut of accurate backup with hash disk.
37 kes Force unload of volume when wrong volume mounted in SD.
39 kes Fix bat seg fault at termination.
40 kes Add Bacula generated version to bat about box.
43 kes Experiment with allowing multiple read jobs.
44 kes Move final volume swapping code to DCR method and
45 call it from acquire_for_read().
46 kes When wrong volume is mounted during read, unload_autochanger.
48 kes Integrate the libdbi changes from Joao Henrique Freitas
50 kes Stop searching for Volumes in SD askdir if DIR returns the
51 same volume name twice in a row.
52 kes Close bat console windows first to eliminate error message
55 kes Tweak the swap Volume from one drive to another code so that
57 kes Resolve several problems with recycling that broke the new
58 code (these problems are in 2.2.9 as well).
59 kes Remove the volume lock when calling the sysop code.
60 kes Don't mark a reserved volume with no writers as unused otherwise
63 kes Rework class structures for VOLRES, DCR, and DEVICE to make
64 the method names a bit more logical, and for more logically
65 handling the responsibilities.
67 kes Remove redundant code in terminating the scheduler that just
68 causes a seg fault in many cases.
69 kes Cleanup releasing a volume and make it a DCR method.
70 kes Improve algorithm for detecting pre-reserved volume and
73 kes Tweak volume swapping code so it works.
74 kes Correct name overloading in mount.c
75 kes Replace released flag in VOLRES with reserved and add access
76 methods for the VOLRES class.
77 kes Prevent volume from being released while being swapped.
78 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
80 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
82 kes Refactor parts of stored/mount.c
84 ebl Add sanity checks for VolWriteTime and VolReadTime
85 ebl Take care of bad clock changes while computing VolWriteTime
86 and VolReadTime. This should fix or limit #1066
87 kes Correct error string numbers in dird/catreq.c
88 kes Restructure reserving, acquiring, and mounting volumes. Calls to
89 autochanger are deferred for mount.c -- simplifes the code.
91 kes Do not prune any running job. It just fails the job.
92 kes Lock the volumes when changing dev->reserved_device and marking
93 the volume unused otherwise the device can get reserved by
94 another job before the volume is released, thus blocking it.
96 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
97 kes Fix bug #1063, reuse of freed ptr in list nextvol.
98 kes Release regex compile buffer in filed/job.c
99 kes Add proper type of const char in sql_create.c
100 kes Turn off debug in daemon termination routines
101 kes Move free_volume_list() before devices are freed in stored.c
102 kes Fix reference to uninitalized stack variables in bregex.c.
103 This should correct bug #1067.
105 kes Fix possible seg fault in SD when freeing a volume entry.
107 kes Implement unload_dev() before swap device.
108 ebl Add statistics prunning with option and menu
109 kes Separate unload_dev() from unload_other_device() in autochanger.c
111 kes Apply patch from bug #1069 that corrects spurious error messages
112 when ACLs enabled on SGI but no ACL exists.
113 ebl Fix small segfault in bacula-sd when debug level is 500
114 kes Modify run_program() and run_program_full_output() to use
115 call by reference for the results string. This corrects a long
116 standing problem where the address of the string may be changed
117 in the subroutine but not in the calling program.
119 kes Re-enable code to remember last volume mounted on a non-tape
121 kes Add patch supplied in bug #1068 that fixes a SD crash when using
122 a Virtual autochanger.
123 kes Generate correct JobMedia records during spooling/despooling when
124 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
125 <tih@hamartun.priv.no> for excellent analysis and testing.
127 kes Tweak hash algorithm for htable using Martin Simmons idea
128 for doing a circular shift.
129 kes Remember what volume is in VTLs (previously turned off for
131 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
132 pointed out some problems in creating JobMedia records during
133 spooling with concurrent jobs. Fix the problem by updating the
134 start file position before despooling and generate a jobmedia
135 record at the end of despooling.
137 kes Fix handling of JobMedia records during spooling and when a
138 Volume is changed without actually writing data to the Volume.
140 kes Rework certain SD locking based on gdb tracebacks of deadlocks
141 sent by Eric. This code now uses only the volume_lock() rather
142 than the reservations lock when at EOM and acquiring a new
144 kes Ensure only one exit point in several subroutines.
146 kes Implement bsock code to permit locking. Use the new code in Verify
147 in the FD to prevent the heartbeat thread from disrupting the Verify
148 data sent to the Dir.
149 kes Modify SD locking to eliminate locking the reservations system from
150 outside the system. Use the volume lock when getting media data
151 and reserving a new volume at end of media.
152 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
153 when SD starts are not locked into place.
155 kes Fix error compiling runscript code on 64 bit machines.
156 kes Tweak Win32 mount point code.
157 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
158 cleared giving bad file estimate).
159 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
162 kes Keep Schedule run lists in order as suggested by
165 kes Implement autostart scripts for Debian.
166 ebl Implement upgrade catalog scripts.
168 ebl Apply jobstat patch for long term statistics. Have to implement
169 purge stats command and upgrade scripts.
170 kes Fix mtx-changer.in for broken Debian mt program.
172 kes Fix large number of JobMedia records reported by Eric Bollengier.
174 kes Apply doc fix from bug #1062.
175 kes Resolve crash and improper restore wx-console Win32 restore
176 GUI. Fixes bug #1065.
177 kes Update Win32 wxWidgets to latest version.
178 kes Attempt to do correct handling of Win32 mount points. Should
180 kes Fix Win32 FD backup/restore memory leak due to improper termination
181 of BackupRead/Write. This fixes bug# 1038.
183 ebl Reduce memory usage for accurate backup, working only with ctime
184 and mtime. (not all Lstat field)
185 About 40MB for my linux system (400.000 files)
187 kes Add dcr->reserved_volume flag that allows us to release a volume
188 even if it is not vol->released. This allows maxvol2 to work when
189 Volumes expire and we are already writing to the device (i.e. a
190 volume is pulled out from under us by another job terminating after
191 we reserve the drive).
193 ebl Permit multiple command/console per runscript definition.
194 RunScript { command = /bin/true ; command = /bin/false ... }
195 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
196 (restart an application) just after the VSS snapshot on windows.
197 kes Don't zap dcr values during release_volume() as they might
198 have the next Volume to be mounted.
199 kes Fix AIX prototype.
201 kes Second cut of drive switching during backup.
204 kes Update Win32 version of wxWidgets to most recent version.
205 kes Tweak Copy job details.
206 kes Rework dir_find_next_appendable_volume to make a bit more effort
207 to find a suitable volume before giving up.
209 kes Make ask_sysop_to_create... to return if waken from wait.
210 This helps get out of blocked conditions.
211 kes Experimental implementation of switch_device in reservations.
212 kes Implement FD version to allow easier protocol changes.
213 kes Add Plugin Options string -- not yet passed to FD.
214 kes Implement PluginOptions ACL.
216 kes Attempt to correct problems with restores with autochangers and
217 use counts going negative
218 kes Rework SD status command and implement API for bat. Implements
219 header, runing waitreservation, devices, volumes, spooling,
220 and terminated status keywords.
221 .status storage=xxx <keyword>
222 kes Clarify TLS error message by adding double quotes around name.
223 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
224 kes Pass jcr to tls routines so debug messages can be handled better.
225 kes Rework jobq resource allocation code, and possibly fix a bug
226 that caused reference counts to get out of sync.
228 kes Rename fd/dir plugin to use Bacula standard underscore.
229 kes Plugin work -- bring dir up to fd level.
230 kes Start implementation of VTL code
231 kes Fix Win32 build after adding new cats subroutine.
233 kes First cut at Duplicate Job implementation.
235 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
236 kes Start PluginOptions string, and refactor a bit of ua_run.c
237 ebl Apply Allan patch that permit to reset recyclepool.
239 kes Test patch -- possible fix or improvement for bug #1053
240 kes Refactor FD and SD status commands to permit new API code in
241 SD, and to fix Win32 build.
242 kes Win32 build is now working.
244 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
245 some ideas in patch from Scott Bailey.
246 kes Begin implementation of duplicate Job control.
247 kes Fix some of Win32 build after recent additions.
248 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
249 which causes the FD to detect whether or not the OS has the
250 honor no dump bit (*BSD systems), and if so, to skip backing up
251 any file with this bit set. The feature is enabled by setting
252 'honor no dump flag = yes' in the Options section of a FileSet.
254 kes Correct po warning message with datarootdir
255 kes Implement more code in dird.c to put configuration parsing in
256 a class rather than use globals.
257 kes Restructure SD status command for implementation of bat API
260 kes Suppress incorrect 'Will not descend from x into y' messages.
261 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
262 daemon globals used by parser.
263 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
265 kes Fix free of plugin_list when none exists.
267 ebl Apply accurate project patch.
269 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
270 on non-mempool object)
271 kes First cut of converting FD .status to work with bat API.
273 .status client=XXX header
274 .status client=XXX running
275 .status client=XXX terminated
276 kes Implement first cut of Copy Job.
277 kes Implement Catalog in Pool resource. It overrides catalog specified
278 in the Client resource.
280 kes Apply patch (with some difficulties) from Joao Henrique Freitas
281 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
283 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
284 ftruncate() actually works. In the case of some (cheap) NAS devices,
285 it does not, and so recycling NAS Volumes does not work. The code
286 simply unlink()s the file, then recreates it. This fixes bug #1011.
288 kes First incomplete cut of big malloc blocks for htable.
289 kes Tweak plugin code.
291 kes Plugin debug code + tweak a couple bat dialog layouts
293 kes Fix creating first JobMedia record during Migration to include
294 proper index. This caused slow restores of migrated jobs.
295 kes Temp fix to plugin name file_index.
296 kes Bacula backed up and restored a MySQL database.
298 kes Implement plugin restore.
299 kes Implement parsing of db_driver to give db_type index.
301 kes First cut of plugin restore code.
302 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
303 and do not strip paths on symbolic links.
304 kes Set catalog backup database and user name from values specified on
305 the ./configure line.
306 ebl Fix #1031 about wrong pool source information in job report.
309 kes Remove a redundant jcr argument to find_files, match_files, and
311 kes Implement '.status dir header|scheduled|running|terminated' that
312 prints the requested status section. With the exception of the
313 header, the other reports have fields separated by tabs (\t).
315 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
316 a resource embedded run command to find a since time if no explicit
317 since time was supplied on the command line.
318 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
319 that updates the state file at job termination time in addition to
320 when the daemon terminates.
322 kes First version where a plugin did a backup.
323 bpipe-fd.so created a backup file, wrote a test
324 string to it, and Bacua could restore this fabricated file.
326 kes Implement DB Driver = string for the DBI driver.
327 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
328 kes First cut of code for loading Win32 plugin dlls. Implement
329 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
330 and implement a dlfcn.h file based on opengroup's definitions of
333 kes First cut plugin directives.
335 kes Apply patch from bug #1049 to prevent stripping the path on a
337 kes Attempt to fix bug #1047 where stripping a path corrupts the
338 heap. Waiting for feedback.
339 kes Correct the Mount message not to suggest labeling a new tape
340 when doing a restore. Submitted by email by John Stoffel.
341 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
342 FD by using casting. Reported in bug #1042.
344 kes A bit of crypto cleanup. More later.
346 Release Version 2.2.8
348 kes Apply patch from Martin to correct bug #1040, bscan sets existing
350 kes Fixed important spelling error in doc -- bug #1045.
352 ebl Fix bextract to be able to extract non-portable Win32 data to
354 kes Move initialization of read/write res lock earlier in the code.
355 This fixes the crash with a null conf file. This fixes bug
357 kes Redefine CURES in lib/parse_conf to be URES and move it all
358 into lib/parse_conf.c -- this responds to bug #1042, but does
359 not fix it. The fix is not to compile with FORTIFY_SOURCE.
360 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
361 the trunk SVN. I don't think this was reported as a bug.
363 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
365 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
367 kes Add DataDespooling and DataCommitting status (committing is
368 the last despooling).
369 kes Finish implementation of new reservations code noted below.
371 kes Fix bsnprintf for float point numbers. I broke recently when
372 parameterizing some variables. This fixes bug #1036.
373 kes Undo recent reservations changes ... will apply them later
374 when they work better.
376 ebl Fixes #1034 which cause mysql to hang the connection after 8h
377 ebl Change default statistics target of filename.name and path.path
378 fields for PostgreSQL. This speeds lookup by indexes. Thanks
380 kes A few more tweaks to new reservation code. Make sure to clear
381 vol released flag when retaking volume. When reading label and
382 label is bad mark volume unused. When recycling, mark volume
383 unused so it can be renamed.
385 kes Fix reserve_volume() so it doesn't release a volume in use
386 (i.e. a volume entry not marked released). This should be
387 the last part needed to fix bug #1018.
389 kes Move Heartbeat documentation from Job to Director resource.
390 This fixes bug #1033.
392 kes Fix existing switch drive SD code to call autochanger to release
393 any old volume. This must be done to keep the autochanger from
394 releasing subsequently newly reserved volumes in doing a close().
395 This should fix bug #1018.
396 kes Fail if attempting to get console input in batch mode. This
397 should help fail RunScript console commands that are incomplete.
398 kes First cut implementing switch_drive() in SD (not actually called).
400 kes Implement first cut running console commands in a RunScript.
402 ebl Fixes bug #1028 where 'Selection Type' option was not usable
404 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
407 Release Version 2.2.7
409 kes Add new free_tls() entry point so that Win32 builds.
410 kes Fix compile warning in src/lib/util.c
411 kes Fix entry point for edit_job_codes() so that Win32 builds.
412 kes Fix seg fault Frank Sweetser reports in regression testing
413 on his systems. The problem was that the original author of
414 bsnprintf.c did not take into account the side effects of
415 using ++x in the argument to a #define.
416 kes Make SD protocol backward compatible with version 2.2.x.
418 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
419 because Bacula no longer restores sockets.
420 ebl Always use ignorecase fileset option on win32 FD.
422 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
423 that implements double quoting include names in conf files,
424 and also allows piping input by having the first character
425 be a vertical bar (|).
426 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
427 that implement %f in RunScripts to pass the FileSet name.
428 kes Skip leading | when lex input comes from a pipe as suggested
429 by Michael Stapelberg <michael@stapelberg.de>.
431 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
432 Nerijus Baliunas <nerijus@users.sourceforge.net>
434 kes Implement Plugin Directory and plugin events.
436 kes Implement a security enhancement: TLS authentication but no
437 encryption. Enabled by setting 'TLS Authentication = yes'.
438 Note when this is on, TLS encryption is turned OFF!
440 kes This patch corrects a problem where the maximum concurrent storage
441 jobs counter gets out of sync during restore jobs causing jobs to
442 'wait on max Storage jobs'. This patch fixes bug #1009.
444 kes This patch fixes bcopy so that it produces correct Volumes.
446 kes This patch eliminates spurious output to the console during a VerifyVolume
447 job that contains encrypted data. It fixes bug #1024.
449 kes This patch prevents the 'status dir' command from trying to use a scratch
450 volume and possibly moving it from one pool to another. This patch fixes
453 kes Add new include to postgresql.c suggested by Marc Cousins so
454 that it compiles correctly with pgre version 8.3.
456 kes Fix --archivedir addition to configure. Replace it with
457 --with-archivedir in configure.in This fixes the regression
459 kes This patch fixes bug #1012 where the job is canceled because
460 of Max Run Time exceeded when the job has not yet started.
462 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
463 one 'part' to write. Instead of each part being stored on disk,
464 written to DVD, then deleted from disk, all parts are written to disk,
465 and only the last is written and deleted from disk.
466 kes This patch fixes the status command to include the formating string for
467 JS_AttrInsterting. It fixes bug #1021.
468 kes This patch should fix the Mac OS X build problem on the latest
469 Darwin, where sys/types.h was not included correctly (apparently
470 due to a change in the Mac headers). The solution was to explicitly
471 ensure that it is defined for the ./configure.
472 This patch also has a rebuild of configure that includes the Debian
473 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
474 kes This patch should ensure that queued messages to the console are
475 displayed as soon as possible. It should fix bug 1007, but has been
476 reported not to work.
478 kes This patch fixes the infinite loop when trying to increase the
479 maximum number of volumes in a Pool during the add command.
480 This patch fixes bug #1008.
482 Release Version 2.2.6
484 db Remove extra data on estimate command in joblist for bat.
486 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
487 really change anything, but is the beginning of doing it *right*.
488 To do it completely right the LastWritten date must be passed to
489 the SD, but it is not yet done.
490 kes Minor tweaks to some bat restore SQL.
491 kes This patch fixes bug #1003 where putting the message output from
492 a Verify job into the catalog results in a recursive loop. The problem
493 seems to show up only with postgresql (to be verified).
494 kes Correct %x to %p in postgresql debug statement.
496 kes Fix bug #942 where lots of emails where generated when the heartbeat
497 interval was low and Bacula wanted a different tape from the one in
500 ebl Add new SD despooling attributes and Dir inserting attributes
501 job status codes in the catalog (Status table).
503 ebl Use qmake-qt4 instead of qmake when available (debian system).
505 kes Add a security warning to src/cats/make_catalog_backup.in indicating
506 that passing the password via the command line (arg 3) is insecure.
507 This responds to bug #990 (it doesn't fix it).
509 kes Set default debug_level to zero. This corrects bugs #991 and #993.
510 kes Fix a crash in bat when it cannot connect to the Director for example
511 if the Director is not running.
512 kes Remove redundant INDEX (JobId) from File table in the trunk.
514 kes Make explicit exception to GPL in LICENSE to permit linking
515 the Win32 FD with Microsoft VSS code.
516 kes Apply the Solaris package patch from
517 Masopust, Christian <christian.masopust@siemens.com>
518 kes Apply the patch to optionally add a timestamp in the debug output
519 submitted by Mariusz Czulada <manieq@wp.eu>.
521 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
522 backend (sql_strerror). Fixes bug #989
524 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
525 It applied with no problems.
526 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
528 kes Redirect stderror to stdin on mt status command in mtx-changer.in
529 since the status is returned on stderr on Solaris.
530 kes Activate Close button on tray-monitor window. This fixes
532 kes Check for NULL item in parse_conf.c before calling it. In the
533 case of Device, there is no item and this caused a seg fault when
534 Device appears in the conf file.
535 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
536 avoids pulling in config.h multiple times in some new code.
538 kes Fix spurious warning message printed when creating a volume with
539 a LabelFormat. This fixes bug #976.
541 Release Version 2.2.5
543 kes Add JobId in place of Job name in all the Jmsg() output.
544 kes Correct the APP_DESC for the Win32 storage service (remove an e).
546 kes Make maxvol-test and new more strict maxvol2-test work.
547 kes Print JobId in all Jmsg() job output.
549 kes Add new SD despooling attributes and Dir inserting attributes
550 job status codes. This fixes bug 961.
551 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
553 kes Fix doc issue. This fixes bug #963.
554 kes Fix listing performance problems in bat. Pointed out by
556 kes Remove old debug code.
557 kes Fix bat code that tests for Win32. This should fix bug #968
558 kes Query 5 list wrong Vol after migration. This fixes bug #960
560 ebl Fix #969 where user can't change Replace option in restore menu.
562 kes Save jcr in thread specific data (tsd) for each thread.
563 kes Make Dmsg() print JobId as -%u.
564 kes Make Jmsg, Emsg, and others automatically pickup the jobid
565 for the thread if it exists.
566 kes Remove old reservation debug jid code.
567 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
568 ebl Add an option that permit to specify spool size in job
569 definition. (Applying patches/testing/spoolsize_per_job.patch).
570 You must upgrade SD and DIR at the same time.
571 dvl Add new configuration item --archivedir
572 dvl Adjust regression tests to use tmp not /tmp. This will allow
573 multiple concurrent runs of the regression tests.
575 kes Fix race condition that drops final block written to volume.
576 This happens in rare cases with multiple simultaneous jobs
577 when the Volume fills. This fixes bug #964. May be related
578 to bug #935 and possibly #903.
579 kes Eliminate more strerror() and replace with bstrerror().
580 kes Remove BSD getopt and replace with unrestricted IBM version.
581 kes Fix Win32 build for changed calling sequences.
582 kes More tweaks to the mount volume routines to get everything
583 right. Changed variable name from find to have_vol, which is
584 much easier to understand.
585 kes Enhance btimer debug code.
587 kes Fix FD->SD authorization failure, which was due to spurious
588 wakeups from a pthread_cond_timedwait(). Simply check the
589 predicate before continuing. This fixes bug #953.
590 kes Add const char where needed (more to do). Remove temp debug code.
592 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
593 kes Don't overwrite error message in check_tables_version.
595 kes Unlock batch insert tables with same calls used elsewhere.
596 kes Allow starting 59 jobs a second.
597 kes Make SD session key more random.
598 kes Add retry for SQLite opening db if it fails. Probably helps
600 kes Suppress extra error messages during batch insert failure.
602 kes Add jcr to timer packets so if killed message can be sent to job.
603 kes Add JobId to all Dmsg() output.
604 kes Put some FD auth code on dbglvl rather than fixed.
605 kes Return insert attributes error message in db msg buffer to avoid
606 false error messages. Helps fix bug #966.
607 kes Separate batch init error messages. Probably helps fix bug #966.
608 kes Make SD code that contructs attribute insert check string lengths
610 kes If Dir gets an error during inserting attributes, cancel SD.
611 This reduces unnecessary error messages.
613 kes Correct search boolean for getting Volume info
614 ebl Cleanup batch insert code. Probably fixes bug #965.
615 kes Back out one small change to the reservation system (reserving a volume).
616 kes Rework how a Volume is mounted. It is now much more intelligent and
617 will always attempt to use any mounted volume if possible and reduces
618 calls to the Director asking about volumes.
620 kes Turn off some code when batch insert not enabled.
621 kes Edit FD name in connect error messages.
622 kes Rework the reservation system to take into account that the Director
623 might give us a Volume that is different from the current one being
624 used, and to ensure that we don't exceed Maximum Volume Jobs.
625 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
626 fatal error with multiple jobs running'
627 kes Add more debug code in reservation system.
628 kes Implement maxvol-test to check bug #947.
630 kes Add code to handle tray monitor separated from Win32 FD.
631 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
633 kes Add missed return in fixing verify bug -- trunk only.
634 ebl Fix a command parser issue causing a director segfault.
635 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
637 kes Increase the max block size to 4MB fixes bug #957.
638 kes ERABT if user sets min block size > max block size. Fixes bug #956.
639 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
640 is not properly mounted (recognized) during a poll.
641 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
642 Job that has differences reports Verify OK.
643 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
645 ebl Add an option to operate on all pools with update vol parameters.
646 This complete the project 20. Patch from Nigel Stepp.
647 ebl Add history support to bconsole when using readline.
648 Using Ctrl-D to exit doesn't update .bconsole_history
649 kes Modify new volume algorithm to use max MediaId for generating next
650 volume number rather than the count of Volumes. This should essentially
651 eliminate the failure rate if some volumes were deleted. Bug #921.
652 kes Begin implemention of Optimize Job Scheduling.
653 kes Implement restore callback that Dirk and I agreed on for bat
654 restore. This fixes bug #928. Restore of backup of zero files fails.
655 kes Fix SQL Catalog logging which broke with new db_escape_string
658 Release Version 2.2.4
660 kes Fix bacula_cats.def for new db_escape_string().
661 kes Increase size of name string when FD making connection to SD.
662 May fix bug #953. FD->SD connection failure.
664 kes Add code to help Dan debug 2drive-incremental-2disk test.
665 kes Add code to try to fix bug #908.
666 kes Add waits to multiple exit detection code to try to force pid
667 file to always be deleted.
668 kes Restore good dev.tar.gz to rescue set appropriate binary property.
670 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
671 trying to switch drives by checking for blocking before unblocking.
673 kes Cancel storage daemon in all cases where FD reports error. This
674 should fix virtually all cases of bug #920.
675 kes Fix db_escape_string() for MySQL which did not compile.
677 kes Fix error message that was clobbered when Dir tells SD it does not
678 have write permission on Volume. This should fix a minor point
679 in bug #942, but not the main problem.
680 kes Add code to cancel job in SD if FD connection fails. This should
682 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
683 dvl Pass jcr and db into db_escape_string() to enable better escaping
685 kes Fix migration code to get correct Volume name with multiple volumes
686 by skipping |. Fixes bug #936.
687 kes Implement patch supplied by Landon to fix bug #944 where using
688 TLS with bconsole uses 99+% of the CPU.
689 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
691 kes Move patches into patches directory.
693 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
696 ebl Using 'm' in bconsole will show messages like before,
697 and not memory usage.
698 kes Fix bug #935, and probably also bug #903 where files were not
699 restored. MediaId was not properly set in JobMedia record after
702 kes Suppress chown and chmod error messages if the FD is not running
705 kes Apply Martin Simmons' patch that should turn off the new API usage
706 when batch insert is turned off allowing building on older
708 kes Add ./configure search in qwt-qt4 for qwt package
710 kes Bacula is now free of 3rd party GPL copyrighted code!
712 kes Add guid_to_name.c/h which replace idcache.
713 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
715 ebl Detect if new PosgreSQL batch insert API is present.
716 kes Correct incorrect mempool call causing Director crash. Occurs on
717 systems without va_copy().
718 sb Update spec files for 2.2.1 release
720 kes Fix memory pool call in ua_output.c. bug #934.
721 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
722 Add test program to fnmatch.c
724 kes Integrate patch to README.vc8 from
725 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
726 edit it to get it into Unix patch format.
727 kes Implement mkpath.c to replace old FSF makepath.c
729 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
731 Release Version 2.2.1
733 kes Update POTFILES.in
734 kes Cleanup a few underquoted AC_DEFUNs in configure
735 kes Apply patch from Martin Simmons that adds a test for va_copy to
738 kes Fix bug #921 by increasing the number of tries to create a new volume
740 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
741 can be called multiple times. Implement a version for machines
742 without va_copy() that gets a big buffer.
744 kes Integrate more portable zone offset code into bsmtp.c
745 Submitted by Attila Fülöp.
747 kes Fix bad SD->FD return status reported by
748 (James Harper) <james.harper@bendigoit.com.au>
749 ebl Fix a bug in read_close_session which return random status
750 thanks to James Harper
752 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
753 and directory names during restore of single file/directories.
754 kes Add sanity checks to .sql command when string is empty. Hopefully
755 that will resolve Dirks Director crash.
757 kes Apply patch submitted by Martin Simmons that corrects a seg fault
758 in the bsmtp chat subroutine when debug is >= 10.
760 kes Fix Director crash when running bat SQL queries.
761 kes Add David's notes on Item 8: Copy pools.
763 kes Rework projects file to be current and ready for a vote.
764 kes Enhance lex scanner error message.
766 kes Tweak LICENSE file to mention BSD code.
767 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
768 if specified on the ./configure.
769 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
770 This class is intended to allow us to open a second bsock to the
771 Director while in the restore subdialog.
773 kes Fix configure to create bat Makefile before creating dependencies.
774 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
775 kes Add a tooltip to the tray monitor.
776 dvl Set the Director's PID file before dropping privs. This fixes
779 kes Update AUTHORs file
780 kes Increase the default max concurrent jobs to 20 in FD and SD to
781 correspond with the default .conf files.
782 kes Rewrite the Win32 service routines. This eliminates the 3 copies
783 some different, of the same file created by RN when porting the
785 kes Rearrange some of the Win32 directories and the placement of the files
787 kes Set DEVELOPER flag in version.h
789 ========================================================================
790 Release Version 2.2.0
792 kes Apply a second doc patch from Marc.
793 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
794 improves the tips section that discusses how to setup multiple
797 kes Update bat README file.
798 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
799 corrects a typo in the Recycle status check in db_find_next_volume().
800 This will probably fix a number of annoying problems with multiple
802 kes Modify most of dird/msgchan.c to use bsock class calls rather than
803 bnet calls -- no functionality change.
805 kes Modify the Verify output to specify if files are missing on
806 the Volume(s) or disk. Fixes confusion in bug #916.
807 kes When more than one Volume is read in a migration job, the last
808 Volume bytes reported are from the last read volume rather than
809 the last written volume. Fixed. This fixes bug #910.
810 kes Fix display of Recycle flag after update volume=foo recycle=yes.
811 It previously printed New Recyle flag is: no. This fixes bug
814 kes Correct seg fault when switching tape drives during restore.
815 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
816 be used until after 2.2.0 release.
818 kes Remove fnmatch() in SD that permitted wild card specifications.
821 kes Fix %g in filename returned by SQL for browse tree reported by
823 kes Fix configure so that it puts config.out in the cwd rather than
825 kes Attempt to fix the locking problem reported by Eric in bug #906.
826 kes Make berrno class to leave errno unchanged after constructor call.
827 kes Make bnet_server use the heap rather than the stack to allocate
828 its socket fd pointers to avoid a crash at termination. Problem
829 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
831 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
832 and putting it in depkgs-qt along with Qt4.3.
834 kes Rework code in acquire.c that switches drives for reading when
835 the Media Type does not match. This should fix bug #906
837 ebl Fix a director segfault during job setup #907
838 kes Correct seg fault in postgresql when first operation returns no
839 rows. Fixes Dirks File browser problem seg fault with bat.
841 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
842 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
845 kes Implement PopUp YES/NO dialog for bat.
847 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
849 kes Correct RunScript to terminate job in FD on failure.
850 kes Change abort_on_error and AbortJobOnError to fail_on_error
851 and FailJobOnError in RunScripts.
852 kes Minor tweaks of code formating in RunScripts, principally to
853 avoid depassing 80 columns.
855 kes Eliminate one #ifdef Win32 in bsmtp
856 kes Implement grow tool to grow a file for testing very large databases.
857 kes Add big-vol-test to test Bacula seeking with > 5GB.
860 kes Modify find_next_volume() to return all values in Media record.
861 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
865 kes Update Release notes
867 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
868 Warning, in previous beta version, all media get from scratch keep their
871 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
872 This should fix bug #842. Made a note to look at removing the temp
873 files at the end of the install.
874 kes Add ability to mount and unmount a file device providing it is
875 marked as being removable and has the appropriate mount and unmount
876 commands defined in the Device resource. This fixes bug #830.
877 kes When applying a storage override, release all previous storage
878 definitions rather than just prepending the new storage.
879 This should prevent a good deal of confusion.
881 kes Implement ./configure search for qwt libraries.
883 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
884 Win32 FD. This should fix bug #893.
885 kes Remove an unnecessary beep in Win32 init code.
886 kes Update copyright dates in Win32 executable about boxes.
887 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
888 code with a BSD getopt.c and getopt.h.
889 kes Remove sched.h from the Win32 compat directory -- not used.
890 kes Remove the Exit menu item from the Win32 tray monitor. If you really
891 need to shut it down, do it through the services panel or the command
893 kes Remove some inappropriate Bacula FSFE copyrights.
894 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
895 kes Fix regress config non-portable test as pointed out by
896 Florian Heigl <florian.heigl@gmail.com>
897 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
898 as pointed out by Florian Heigl <florian.heigl@gmail.com>
900 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
901 Reported by Frank Sweetser.
905 kes Fix client-only build.
906 kes Integrate client-only fixes for bsys (initgroups) and conio from
907 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
908 kes Make arguments to get_scratch_volume() in same order as other
910 kes Rework the prune_volumes() subroutine so that after purging and
911 no volume found in desired pool, it will check for a scratch
912 volume. This prevents recycling the whole scratch pool.
913 kes Add code to status storage to print boffset_t (largefile support).
915 kes Move qwt (Graphics libarary for Qt4) to depkgs.
916 kes You now need a --with-qwt=<dir> to be able to build bat.
917 kes Update src/win32/cats/bacula_cats.def to include the new
918 db_get_query_dbids() call on Win32.
920 kes Correct a problem when selecting a scratch volume and moving
921 it to another pool that lost some columns.
922 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
923 kes Enhance Autochanger error messages to include Volume and device name.
924 kes Rework prune_volumes() code to take account of InChanger flag,
925 and to handle recycling volumes going to the Scratch pool and
926 current pool because the RecyclePool directive.
927 kes Implement a better and more efficient db_get_query_dbids() to
928 handle creating and passing back a list of DBIds.
932 kes Start work on new more efficient DBId subroutine. First use
933 will be for recycling volume to Scratch inchanger.
934 kes Increase number of JobIds in pruning from 1000 to 10000.
935 This to be replaced by above routine.
936 kes Begin implementation of building Qt4 on Win32.
937 kes Correct typo in fix I added for bad TLS shutdown.
938 kes Pull 2.0.3 patches into patches directory.
939 kes Update Release notes. Include qt-console in line count.
940 kes Update Projects file.
942 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
943 bug in migration code where a job that spanned two volumes
946 kes Implement new BST_DESPOOLING blocked state. Change from locking
947 during despooling in SD to blocking. This means that other threads
948 can work with the device structure, in particular the reservations
949 system while despooling.
951 kes Fix return in reservation message queue that missed clearing
952 the jcr lock (implemented 26Jun07 below).
953 kes Rename a number of dev methods to make locking function names
955 kes Document locking in lock.c. Move lock structures to new file
958 kes Move reservations message lock to lock jcr only this
960 kes Move main SD locking code into lock.c (new file).
961 kes Update Win32 build to include lock.c
965 kes Dirk committed the qwt library code for drawing graphs in bat.
966 kes Tweak install of qwt so that it is integrated with ./configure.
968 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
969 out by Eric (my typo).
970 ebl Fix configure.in to get batch mode enable
971 kes Return correct string from authenticate.cpp in bat when connecting
973 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
974 spurious line drops when using TLS.
975 kes Do not file reparse points when restoring a file that already
978 kes Implement Windows reparse points -- similar to directories, but
979 we do not descend into it. This is a first cut. They seem to
980 be backed up, but restore is not yet tested.
981 kes Remove restore_blocking in tls code when shutting a socket to leave
982 it in blocking mode. Hopefully this will fix the encryption bug
983 reported by Frank Sweetser.
984 kes When opening a file for backup, tell the OS that we are going to
985 read it sequentially -- optimization.
986 kes Change variable names in authenticate_director() to not conflict
987 with member names in bat. Caused great confusion with compiler,
990 kes Queue openssl error messages in case of comm problem.
991 kes Do shutdown() call if socket terminated.
992 kes Remove some duplicated code in tls.c
993 kes Move more of the bsock member variables into private and access
995 kes Add Frank Sweetser's tls-test to the regression suite.
997 kes Add Swedish sv.po file
999 kes Don't print clock skew message in FD if less than 3 seconds diff.
1000 kes Add a bit of VSS info to status client.
1001 kes Implement a first cut of Vista VSS, using Win2003 code.
1003 Release: 2.1.20 beta
1005 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1006 loaded tape but uses first drive).
1007 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1008 This was indeed a Win32 issue.
1010 kes Simplify search of autochanger for in-use Volume.
1011 kes Fix exit condition of check for in-use volume. kes Remove
1012 inappropriate my_postgresql_free_result() in db_close()
1014 kes Fix bad return in FD when encryption signature not found.
1015 Probably caused a crash.
1016 kes Inhibit missing encryption signature error messages for
1017 file types where no signature computed.
1018 kes Correct inverted check on autochanger in reservation system.
1019 kes Tweak debug code in autochanger reservation.
1021 kes Add some additional locking in the cats directory in subroutines
1022 that modify packet variables called from batch insert.
1023 kes Rework how dcrs are allocated. new_dcr() can now be called
1024 with an existing pointer, and it will simply clean it up.
1025 This allows the reservation system to test various different
1026 devices, and will permit easy device changes.
1027 kes A bunch of changes all over to handle new new_dcr() calling
1029 kes Work more on the Volume management in the SD. Remember Volumes
1030 for tape drives and for autochangers (even virtual disk changers).
1031 kes When looking at the Volume list to reserve a drive, handle
1032 autochanger names correctly by interating through the changer
1033 devices. Also call the Director to see if a Volume is suitable
1034 for the current job.
1035 kes Fix some bugs in bscan. Make sure all media records are written.
1036 Make sure that valid JobMedia records are written for disk files.
1037 Previously they were completely wrong.
1038 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1039 that the URLs don't change and so that the developers will all
1040 work off the same copy. Rebuild from scrach.
1041 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1043 Release: 2.1.18 beta
1045 kes Fix seg fault in FD from incorrect digest size.
1046 kes Fix argument to non-OpenSSL crypto.c subroutine.
1048 Release: 2.1.16 beta
1050 kes Remove a few malloc()s from the encryption code.
1051 kes Use the class calls to bsock in filed/backup.c and restore.c in
1052 place of the old bnet_xxx code.
1053 kes Implement code that does an on the fly calculation of the
1054 signing digest during restore of encrypted files. It makes
1055 a best guess at the algorithm, and if it is not correct, will
1056 then revert to the old code which reads the file after it is
1058 kes Implement at least one missing crypto stream in stream_to_ascii()
1059 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1060 #877 where a reload with bad syntax causes Dir to exit.
1062 Cut: 2.1.14 beta (not released)
1064 kes Do not free a volume on a tape drive until another volume is
1065 mounted and read, or the autochanger unloads the volume.
1066 This should help the SD re-use volumes that are already mounted,
1067 and should fix bug #886.
1068 kes Apply patch from user brettedgar that allows gnome2-console include
1069 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1070 kes Apply patch from Lucien Weller that fixes day of week calculation
1071 because of DST flag problem. Fixes bug #887.
1073 kes Move find_next_appendable_volume() to after acquiring a valid device
1074 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1076 kes Unable to reproduce bug 872. However added additional testing for
1078 kes Bug #874 resolved by documenting SQLite limitations.
1079 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1080 kes Bug #881 resolved by removing typo in mtx-changer script.
1081 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1082 approval. Added a link to the wiki on the web page, and implemented
1083 a backup from http://paramount.ind.wpi.edu
1085 kes Fix update allfrompool to pass pool name.
1087 kes Convert to pure GPL v2 license.
1088 kes Fix sscanf problems reported by Peter Buschman that caused
1089 a bus error on Solaris.
1090 kes Rework (simplify) the select prompt in bat.
1091 kes Move get_jobid_from_tid() into lib and create a
1093 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1094 should definitely fix the problem of lost error messages in the
1096 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1097 kes Eliminate tcpd.h from the project. Enclose the #include from the
1098 library with extern C ...
1099 kes Add print of signal name when a signal is trapped.
1101 Release: 2.1.12 beta
1103 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1105 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1106 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1107 makes SQLit3 run 30 times faster, though a bit less safe.
1108 kes Implement --with-batch-insert in configure and detection of thread
1109 safe libraries. It is on by default, but turned off if no thread
1110 safe library (e.g. SQLite 2) is available.
1112 kes Fix Bacula PostgreSQL buffer overruns.
1113 kes Do better checking for NULL results returned from PostgreSQL;
1114 implement retry for failed queries; clear results buffer after
1115 failed query. Hopefully this will correct the PostgreSQL failures.
1117 kes Implement algorithm to handle only one appendable volume with
1118 Prefer Mounted Volumes = no.
1119 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1120 returned from a query.
1121 kes Make volume lock recursive.
1122 kes Implement an additional volume reservation algorithm that
1123 starts by considering all reserved volumes then uses the
1124 old brute force algorithm of searching the resources to
1125 find a suitable device.
1126 kes Add new reservations debug code and refine the old code.
1127 kes Update the win32/dll/bacula.defs file.
1129 kes Tweak reservations algorithm to permit a few more cases, i.e.
1130 volume reserved, but on different drive, ...
1131 kes Enhance SD status to include Pool and Media Type for drive in a
1132 more readable format (a bit longer).
1133 kes Fix PostgreSQL double free.
1135 kes Minor refactoring of restore decryption code.
1136 kes Add code to smartall.c to detect double free of a buffer.
1138 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1139 so that bsmtp will create a correct email address (mailbox only).
1140 kes Modify 'memory' command so that the buffers are listed as 'In use'
1141 to avoid confusion with Orphaned buffers.
1142 kes I reworked the OpenSSL include/lib flags to be handled in
1143 the standard Bacula way, which should fix bug #863 concerning
1144 non-standard OpenSSL libraries.
1146 kes Implement Help Browser window for bat.
1147 kes Fix reload bug that reset StorageId to zero.
1149 kes Fix TLS #ifdefing when TLS turned off.
1150 kes Ensure that when labelling a tape with Slot=0 that InChanger
1152 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1154 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1155 add DISTINCT (required by PostgreSQL).
1156 kes Implement BSOCK authenticate_director() method. Eventually will
1157 authenicate all daemons.
1158 kes Move several more functions into the BSOCK class.
1160 kes Add code to tell the OS that we no longer need a cached
1161 file that we were reading. In findlib/bfile.c. Also,
1162 only cache files that we are reading. Thanks to
1163 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1164 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1165 kes Implement script to automatically generate cats and dll .def
1166 files for Win32 dll.
1167 kes Update README.mingw32 to include new .def file generation.
1168 kes Correct typo in UTF-8 error message as reported by:
1169 jhernandez <julianhernandez@gmail.com>
1170 kes Add additional sm_check() code on debug level 1.
1171 kes Set default debug level to 1.
1172 kes Trap SIGABRT in attempt to get traceback.
1174 kes Reduce bat connect timeout from 30 to 15 seconds.
1175 kes More restructuring and implementing BSOCK class in place of
1177 kes Remove a few unnecessary malloc() tests in crypto code.
1178 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1179 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1180 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1182 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1184 kes Fix Verify InitCatalog. The attributes were not pointing to the
1185 correct saved location.
1186 kes Implement message callback so that GUI is sure to get all
1187 daemon messages. Currently displayed in a dialog in bat.
1188 kes Ignore SIGUSR2 (Bacula timer) in bat.
1189 kes Apply regress patch from bug #859 to allow regress to work
1190 with Solaris compiler.
1192 kes Begin adding TLS support to bat.
1193 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1194 clean up lex.c and make it more readable.
1196 kes Move more bnet functions into the BSOCK class.
1197 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1198 kes Complete change of berrno strerror() method to bstrerror()
1200 Release: 2.1.10 beta
1202 kes Cleanup incorrect email addresses in bsmtp.
1203 kes Make bat display initial messages rather than discard them.
1205 kes First cut of adding .mod to the run command.
1206 kes Implement auto display of messages in bat.
1207 kes Enhanced preferences to allow all Bacula output to be
1210 kes Try to make bsmtp date routines more generic.
1211 kes Fixed bug #856 autochanger documentation.
1212 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1213 kes Add new cats entry point so Win32 builds.
1215 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1217 kes Do better checking for the MySQL 64 bit libraries looking for both
1218 .a and .so libraries.
1219 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1220 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1221 kes Require the thread safe version of MySQL during configure. Thanks
1222 to Andre Noll for pointing this out.
1223 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1224 continuing in migration code.
1225 kes Apply implementation of tray-monitor font derived from gnome-console
1226 submitted by Andreas Piesk <a.piesk@gmx.net>
1228 kes Eliminate important memory loss in SQLite
1229 kes Fixed the batch insert MySQL thread specific data that was not
1230 being freed. See cats/mysql.c:db_thread_cleanup().
1231 kes Fix restore before command.
1232 kes Convert old hdr.name to name() in a few places.
1233 kes Implement update jobid command.
1234 kes Return all time_t dates in db_get_job_record()
1235 kes Stop watchdog in SD earlier.
1236 kes Put Pool just after Storage in please mount message.
1237 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1240 kes Update the po files.
1241 kes Fix Verify InitCatalog by making it cache attributes.
1243 kes Change name bacula-bat to bat for man 1 page to correspond to
1245 kes Check for client and store NULL pointers in status command. This
1247 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1248 kes Fix sign extended editing of %p.
1249 kes Clean out a little old #ifdefing in cats/mysql.c
1251 kes If time diff between DIR and FD is more than 600 seconds convert
1252 INFO message to WARNING.
1253 kes Implement heap size display in status for all daemons.
1254 kes Attempt to fix MySQL db open memory loss (not successfull).
1255 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1256 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1257 Query. This looks like a MySQL but but by doing extra releases,
1258 the memory goes away. This should fix bug #847.
1260 kes When backup fails, cancel SD before waiting for sd termination.
1261 kes If SD is waiting for FD to connect during cancel, wake up the
1263 kes Fix fsf code so that errno is correctly reported.
1264 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1266 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1267 so that Bacula doesn't later stumble into a seg fault.
1268 kes Use the term Restore Client in the restore Job report.
1269 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1270 the original job's FileSetId.
1271 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1272 spooling in migration jobs. Not yet tested.
1273 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1274 reading conf file from a pipe. However, do it with open_bpipe()
1275 rather than popen. Not yet tested.
1277 kes Fix an ugly bug where the VolCatBytes were getting updated
1279 kes Implement bconsole memory command that prints current memory
1280 usage, plus smartalloc dump.
1281 kes Clarify some error messages in backup, admin, and migrate.
1282 kes Shrink label dialog to smaller size.
1283 kes Invert Cancel OK buttons on restore to be OK Cancel.
1284 kes More strerror() to bstrerror() conversions.
1286 kes Start implementing bstrerror() in place of strerror().
1287 kes Stripping path -- seems to work.
1289 kes Prevent door and port files from being restored (mostly
1291 kes Free an unreleased buffer in compat code.
1292 kes Change console Job name from *Console* to -Console- to eliminate
1293 Win32 filename problems. Put Win32 path separator when creating
1294 Console file. This fixes bug #846.
1295 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1297 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1299 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1300 to force Win32 error message.
1302 kes First cut strip path. The data should be passed to the FD,
1303 but nothing is done with it yet.
1304 kes Enhance the digest and signature routines in the crypto
1305 library to accept a JCR and to use it to print error messages
1306 so that they will go in the Job report rather than the daemon's
1308 kes Simplify some of the verify signature code.
1309 kes Simplify a few of the alternative returns in the signature
1312 ebl Use only POSIX regex instead of GNU regex in breg.c for
1313 File relocation. It fix broken freebsd compilation.
1314 kes Convert all other Dir files to use new ua class message
1316 kes Tentative fix for missing digest signature in bug 807.
1317 kes Correct handle problem in new win32_ftruncate routine.
1318 kes Convert ua_purge.c and ua_update.c to use new ua class
1319 message routines for bat.
1321 kes Correct incorrect installation of LICENSE in Win32 installer.
1322 kes Display LICENSE at the beginning of the Win32 install.
1323 kes Attempt to correct the need for the png files to be installed
1325 kes Reapply my bat.conf install script in qt-console. I think I
1326 editted bat.pro instead of bat.pro.in and it was lost.
1327 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1328 the /var/lock/subsys for subsysdir. Also corrects typos in the
1331 kes First cut update job.
1332 kes Correct configure to include qmake of src/qt-console directory.
1334 kes Make restore job yes/mod/no print in one command so GUI works.
1335 kes First cut implementing backup and restore client.
1336 kes Correct editing in Verify output that caused a seg fault.
1338 kes Insure that bat.conf is not overwritten during installation.
1339 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1340 while I was implementing migration in March 2006 !
1342 ebl Cleanup file relocation, using char *RegexWhere instead of
1343 char *where + bool where_use_regexp
1344 kes Update some manpages and add bat manpage.
1345 kes Make a first cut at converting bacula.spec.in for bwx-console
1347 kes Apply patch from John Goerzen to add hostname as fourth argument
1348 to make_catalog_backup script.
1349 kes Fix typos I introduced into bsmtp.c
1350 kes Make pm_strxxx() routines handle input of NULL pointer. This
1351 is to protect from NULL pointers returned from SQL databases.
1352 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1353 kes Add more debug to FIFO code -- fix fifo regression test.
1355 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1356 kes Add thread timer to bnet_connect() to break from OS if wait time
1359 kes Update Win32 build to include new files, new symbols, and
1361 kes Implement socket level heartbeat (tcp_keepidle)
1362 ebl Commit File relocation patch
1363 kes Make bat have 'make install' target.
1364 kes Warn during install if old gnome-console binary found.
1365 kes Warn during install if old wx-console binary found.
1366 kes Add -8 option to bsmtp command line to add content type utf-8.
1367 Fixes bug #809. (Character coding problem in bsmtp).
1368 kes If < is found in target (from, to, cc) then do not enclose the
1369 target in < > in bsmtp. Fixes bug #772 (malformed address).
1370 kes When printing certain items in dbcheck, stop after 300000.
1371 Fixes bug #822. (dbcheck loops).
1372 kes Incorrect status in Dir after waiting for mount with poll set.
1375 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1377 kes Print waiting to reserve a device every 5 mins.
1379 kes Don't call close_part in label.c if tape and relabel.
1380 kes Don't free volume if busy in close() -- should help with
1382 ebl Fix #824 RunScript bug (After script could be execute twice)
1383 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1384 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1385 Add a regression script to test RunScript
1387 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1390 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1391 deprecated. No additional bugs will be fixed, and they will be dropped
1392 in a future release (probably 2.4.0).
1393 kes Change name of wx-console to bwx-console to make it more Bacula
1395 kes Change the name of gnome-console to bgnome-console to make it
1398 kes Some time in March, a Feature Request with patch from Jorj Bauer
1399 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1401 The ability for the director to validate a Client (FD) CN against
1402 an arbitrary set of patterns rather than the hostname, with
1403 A new 'TLS Allowed CN' set of directives which are implemented
1404 in the Client resource. Then pattern matching is used in place
1405 of hostname matching against the Certificate's CN. As an example, we
1406 have certificates which (a) use a local CA, and (b) have a CN of the
1408 kes Add new/changed entry points to Win32 build
1409 kes Create unaccepted-projects for projects that are not accepted.
1410 kes Simplify locking in the reservations system.
1411 kes Add more debug code in reservations.
1412 kes Make sure error condition on reserving a volume is handled correctly.
1413 kes Correct handling of volume_in_use.
1414 kes Correct handling of initializing a device.
1415 kes Move handling of broadcasting releasing a device into release_device().
1416 kes Correct attaching dcr to dev so that it is only done if device
1417 is properly initiated.
1419 kes Locking debug level tweaks in SD.
1420 kes Tweak new Volume code.
1422 kes Add exec external-command [wait-seconds] to bconsole. This
1423 executes the external-command. Note! normally external-command
1424 should be enclosed in double quotes.
1425 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1426 it should normally be off in a production system.
1428 kes Implement die command for SD so that we can force it to dump.
1429 kes Implement SD lock debug code.
1430 kes Implement new algorithm for keeping Volume list in SD. It
1431 is now owned by the device.
1433 kes Implement new code for freeing in use volumes that should
1434 resolve if not all, some of the problems of multiple drive
1435 tape conflicts described in bug 801.
1437 kes Fix gui/bacula-web/images files in svn.
1438 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1440 ebl Fix a bug in batch mode (in string escape)
1441 kes Correct migration prune SQL typo that crept in in a
1442 recent 2.1.x change.
1444 kes Move bnet_despool() into class in bsock.c
1445 kes Modify job report to include director name and Build OS.
1446 kes Move drop root privilege and check_catalog() before fork.
1447 kes Add update database scripts (version 9 to 10) to updatedb directory.
1449 ebl Check size and age of each file after its backup to see if
1450 it has changed during backup, if 'checkfilechanges' is set.
1451 The FD will do an extra check (stat(2)) after
1452 each file backup. mtime, ctime and size are compared with
1453 'before backup' information. If time or size mismatch, an
1454 error message will be generated. You must upgrade FD to use it.
1456 kes Make database name and user configurable
1457 --with-db-name=xxx --with-db-user=xxx
1458 kes Add back database type to message.c for debugging.
1460 kes Implement dir_sql() which issues an SQL query.
1461 kes Modify bat medialist to use dir_sql() and do some minor C++
1462 formatting as well as eliminating a number of pointers, simplifing
1465 kes Fix some of the mtx-changer grep commands for tape label readers.
1466 kes Convert a number of bsendmsg into the appropriate send/warning/error
1467 message class calls.
1468 kes Suppress the using database message in the .sql command.
1469 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1471 kes Add context menu for floating a window.
1472 kes Some minor cleanup and name changes in qt-console
1473 kes Add doing mt setblk 0 in Win32 mtx-changer.
1474 kes Apply Martin's bug fix to move definition of ENODATA for
1476 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1477 sqlite2 and sqlite3.
1479 kes More pruning cleanup.
1480 kes Turn on wait_for_drive by default in mtx-changer.
1481 kes Turn on Batch insert code by default as it now passes regression.
1482 kes Add ./configure --enable-bat to enable building of Bat.
1483 No install yet though.
1485 kes Implement a new .sql command for bat.
1486 kes Implement code to turn off pruning in obtaining the next volume.
1487 Pruning is turned off for the status dir command, but turned on
1488 for SD requests and for the list nextvolume command.
1490 kes Correct Qmsg() that was not updated correctly when committing a
1491 previous change (probably the recent TLS patch).
1493 kes Write new subroutine is_volume_purged() that explicitly checks
1494 if the Volume is purged, and if so marks it as such. This should
1495 resolve problems reported about needing to mount twice to recycle
1497 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1498 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1499 amount of duplicated code.
1500 kes Do volume pruning only for the Media Type desired (reduces pruning time
1501 if multiple Media Types are in the same pool).
1502 kes Implement more detailed info in the Job report for the Bacula version
1504 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1506 ebl Add bbatch tool to bench database and insert mode.
1507 Fix sql quote stuff in batch mode
1508 Fix sql stuff for mysql
1510 kes Correct problems with am/pm scheduling. Fixes bug #808.
1511 kes Implement new prunning code that prunes up to 1000 jobs at
1512 the same time. The same technique can be applied to a number
1513 of other prune/purge subroutines.
1514 kes Add an insanity check when starting a new tape job to ensure
1515 that the tape position has not been changed. If so fail the
1517 kes Fix Win32 build for dlls to add the folllowing:
1518 src/lib/bsock.c -- new file with new entry points
1519 src/lib/dlist.c -- new entry points
1520 src/cats/sql_create.c -- new entry point
1521 src/cats/sql_cmds.c -- new DATA item exported
1523 ebl batch mode cleanup bscan-test is ok now.
1524 kes Implement SD code to check length of disk volume before appending.
1526 kes Correct return status on db_batch... routines.
1527 kes Add call to db_write_batch_file_records() to migration code.
1528 ebl Fix AfterJob timing
1529 kes Move the checking of the database in initializion of the Director
1530 to after we drop privileges. This avoids the need for both root
1531 and bacula access to the DB.
1532 kes Correct a misplaced variable definition in src/filed/backup.c
1533 kes Correct how the new batch insert db_create_attributes_record()
1534 uses the arguments. Caused a seg fault in bscan.
1535 kes Implement lock() and unlock() methods in DEVICE class.
1536 Implement block() and set_block(xx) methods in DEVICE class.
1537 kes Modify bnet_connect() so that it uses time() to check for the
1538 wait time expiring (on some OSes, some system calls may not
1539 return immediately).
1540 kes Modify Verify to obtain the previous JobId when it is actually
1541 running rather than at schedule time (as it was in 1.38.x).
1542 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1544 kes When checking pid in pid file, continue running if the pid is
1545 the same as ours. This occurs on IRIX after a system crash.
1548 kes Extend new GUI API.
1549 kes Make the ua structure a class, and implement send_msg(),
1550 error_msg(), warning_msg(), and info_msg().
1552 kes Apply fix from for building wx-console on the Mac from
1554 kes Implement new select mechanism for GUI programs.
1555 kes Reorganize initialization of stackedWidgets in bat.
1557 kes Add updated nagios plugin supplied by Christian Masopust.
1559 kes More bat implementation.
1560 kes File migrate bug with Pool Occupancy using mediaid instead
1561 of jobids. Fixes bug #795.
1562 kes Fix orphaned buffers in filed backup and verify due to
1563 crypto buffers not freed during errors. Fixes bug #789.
1564 kes Extend new GUI api code to tree commands.
1565 kes Ensure that tree and dot commands check console ACLs.
1566 kes Permit marking directory with trailing slash.
1567 kes Allow 20 console connections (instead of only 10).
1569 kes Add smartctl call to bacula-sd.conf as an example of getting
1572 kes Modify jobq.c to let simultaneous restore jobs run. This may
1573 cause them to fail if they cannot get a drive.
1574 kes Add Client Connect Wait to Storage daemon to permit users to
1575 modify the time the SD waits for a FD connection.
1577 kes Correct virtual changer check which was backwards. This caused
1578 volumes to be unloaded into slots already occupied.
1580 kes Apply Command ACL filter to JobId list in restore command.
1581 kes Correct typeo in var.c patch.
1583 kes Don't let Bacula prune File or Job records for the current Job.
1584 kes Fix variable substitution pad + inc bug reported (with patch)
1587 kes Correct SQLite log table index as reported by Luca Berra.
1589 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1591 kes Begin implementing new comm signals for API.
1592 kes Fix a few places in lib/message.c where the open fd may
1594 kes Continue implementing lib/bsock.c (real class). Make jcr,
1595 who, host, and port private. There are new methods to access
1596 them for non-class use. This required touching a number of files.
1598 kes Add LANG=C to autoconf/randpass so it works with languages other
1599 than English. Fixes bug #788.
1601 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1603 You will not be able to generate Include/Exclude list any more.
1604 It will be fixed soon.
1605 If you want to use this, you can apply
1606 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1608 kes Restore of sockets created false error messages because Bacula
1609 no longer restores sockets, but the code was still trying to
1610 set the attributes on a non-existent file. Reported by a user.
1611 ebl finish RecyclePool feature
1612 Media will takes Pool.RecyclePool
1613 when moving from Scratch to a Pool or when user will do
1614 update volume=xxx frompool
1615 To use it, add RecyclePool = aPool to your Pool resource
1618 RecyclePool = Scratch
1622 kes Expand new BSOCK class adding signal() and new BNET signals.
1623 kes Begin enhancing the dot commands adding a new API function
1624 that returns more information and will make it easier
1625 to interface to the Director from a program.
1627 kes Make DEVICE fd private. Its new name is m_fd, and can be
1628 obtained with dev->fd() outside the class. This is the
1629 first of many DEVICE members to be made private.
1630 kes Implement Michael Renner's idea on having a virtual disk
1631 changer. I made some minor modifications (e.g. I did not
1632 implement the Virtual Changer directive, but simply set
1633 the Changer Command to an empty string.
1635 kes Implement a BSOCK send() method that writes the whole record
1636 in a single write() request rather than in two.
1637 ebl add update volume=xxx recyclepool=yyyy
1638 volume takes recyclepool from pool when using update volume=xxx from pool
1640 kes Fix encryption deblocking bug, which caused some restored files
1641 to be truncated. This fixes bug #763.
1642 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1643 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1645 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1646 ebl Use btime_t instead of uint64_t in media patch.
1648 kes Optimize the use of the database a bit in the Status dir command.
1649 Only open it when needed, ensure that if any previous database
1650 was opened, it is closed.
1652 kes Correct VolCatBytes bug from media patch.
1653 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1654 in the case of orphaned records.
1655 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1656 and File records in 300K chunks to be more efficient. This
1657 idea came from Juan Luis Frances (if I remember right).
1658 kes Apply Eric's scratch patch that moves a purged Volume to
1659 the RecyclePool. Question: how is RecyclePool set? what
1660 happens to the ScratchPool?
1661 kes Apply Eric's media patch that collects read/write media
1662 times as well as byte counts. This patch requires a
1663 simultaneous upgrade of the DIR and SD. Note, there
1664 should be some way to turn off timing. I'm not sure
1665 times are in Bacula units.
1666 kes Apply Eric's batch-insert patch.
1668 kes Update projects list.
1670 kes Implement Include/Exclude file lists in FD as dlists using
1671 the new dlistString class. This permits efficiently having
1672 large include/exclude lists and completes project Item 25.
1673 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1674 console is authorized to cancel the job. This fixes bug
1676 kes Modify SD so that the VolCatJobs medium record is updated
1677 at the beginning of a Job rather than the end. This
1678 fixes bug #775 where exceeding MaxVolJobs caused jobs
1680 kes Added a mutex around getting and setting Volume information
1681 so that multiple simultaneous jobs will single thread.
1683 Switch to using Subversion
1684 kes Remove src/pygtk-console/ from configure
1686 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1687 plus the entrypoints.
1688 kes Apply patch supplied that corrects debug print
1689 in canceling jobs for max run time. Supplied as
1690 part of bug #621, which was previously fixed.
1692 kes Test on job_canceled() and sd_msg_thread_done inside
1693 loop starting the message thread to avoid a race condition.
1695 kes Remove rl_catch_signal from console.c as it conflicted
1696 with the header definition. Fixes bug #765.
1697 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1699 kes Clarify some stored/acquire messages to indicate if the
1700 problem is with read or append.
1702 kes Fix memory leak with storage ids in cats/sql_get.c
1703 kes Terminate watchdog earlier to avoid reference to released
1704 memory -- reported by Jason Austin.
1705 kes Move closing the database from jobq.c to the director daemon
1706 termination routine. This fixes memory leaks for shadow jobs
1707 (i.e. migration jobs).
1708 kes Free up the unique jobid chain items in migrate.c. This fixes
1709 a memory leak problem.
1710 kes Convert some ugly looking for statements to use foreach_alist
1711 in findlib/find.c. This will facilitate converting the structures
1712 to use dlist (for large include/exclude lists).
1713 kes Fix a bug in the btree.c and btree.h routines, then rename them
1714 rblist and add them to be built in src/lib. Include some new
1715 methods written by Rudolf Cejka that make the code more readable
1716 (hides some of the ugly casting).
1717 kes Add set_next() and set_prev() methods which make the code much more
1718 readable. Also add a new dlistString class that facilitates storing
1719 strings in dlists. To be used in the large include/exclude lists.
1720 kes Make some trivial modifications to lib/tree.h that use rblist
1721 rather than dlist for storing the tree links. This was suggested
1722 by Rudolf Cejka. The result of this is that the restore tree now
1723 uses red-black binary trees rather than simple linked lists. This
1724 should give rather dramatic speed improvements for directories
1725 contining large numbers of directories/files (more than 10000).
1727 kes Fix maxruntime bug #621.
1729 ebl Implement the include JobID in spool file name project.
1730 kes Reorder projects file in order determined by Jan 2007 vote.
1731 kes Implement item #12 on project list -- quick release of FD by
1733 kes Fix open of SQLite3 db where user does not have write permission
1734 so that DIR does not crash. Fixes bug #761.
1736 kes Add back missing @ in Win32 Makefile.
1737 kes Change 'Device not configured to autolabel' from INFO
1739 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1740 which should restart an indefinite # of times.
1741 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1742 other DIR specifications.
1744 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1745 Fix path quoting in SQLite scripts.
1746 Fix problems with SHGetFolderPath.
1748 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1750 kes Fix Job restart on error bug that promotes an Inc to a Full
1751 backup. This should fix bug #755.
1752 kes Add qt-console and first cut of code.
1756 kes Fix Bacula->Documentation link on Win32 to point to index.html
1757 instead of bacula.html. Fixed bug #750.
1758 kes Return JobId in db_get_job_record() when JobId==0. This should
1760 kes Do not release source pointers when restarting a failed job.
1762 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1763 This *should* fix bug #747.
1764 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1767 kes Modify USTORE constructor to set an empty store_source string,
1768 and don't copy the store_source string in a cancel. Hopefully
1769 this will fix Arno's seg fault, bug #744.
1770 kes Add back code to disable conio in configure. Fixes bug #743.
1771 kes Correct the Options scanner in the FD to correctly handle
1772 SHA1 option, which was eating the next option. Reported by
1774 kes Add code to indicate when the SD is spooling, spool wait, and
1775 despooling as requested by Alan Brown.
1777 Version 2.0.0 released: 4 January 2007