1 Technical notes on version 2.3
5 kes Rename fd/dir plugin to use Bacula standard underscore.
6 kes Plugin work -- bring dir up to fd level.
7 kes Start implementation of VTL code
8 kes Fix Win32 build after adding new cats subroutine.
10 kes First cut at Duplicate Job implementation.
12 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
13 kes Start PluginOptions string, and refactor a bit of ua_run.c
14 ebl Apply Allan patch that permit to reset recyclepool.
16 kes Test patch -- possible fix or improvement for bug #1053
17 kes Refactor FD and SD status commands to permit new API code in
18 SD, and to fix Win32 build.
19 kes Win32 build is now working.
21 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
22 some ideas in patch from Scott Bailey.
23 kes Begin implementation of duplicate Job control.
24 kes Fix some of Win32 build after recent additions.
25 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
26 which causes the FD to detect whether or not the OS has the
27 honor no dump bit (*BSD systems), and if so, to skip backing up
28 any file with this bit set. The feature is enabled by setting
29 'honor no dump flag = yes' in the Options section of a FileSet.
31 kes Correct po warning message with datarootdir
32 kes Implement more code in dird.c to put configuration parsing in
33 a class rather than use globals.
34 kes Restructure SD status command for implementation of bat API
37 kes Suppress incorrect 'Will not descend from x into y' messages.
38 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
39 daemon globals used by parser.
40 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
42 kes Fix free of plugin_list when none exists.
44 ebl Apply accurate project patch.
46 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
47 on non-mempool object)
48 kes First cut of converting FD .status to work with bat API.
50 .status client=XXX header
51 .status client=XXX running
52 .status client=XXX terminated
53 kes Implement first cut of Copy Job.
54 kes Implement Catalog in Pool resource. It overrides catalog specified
55 in the Client resource.
57 kes Apply patch (with some difficulties) from Joao Henrique Freitas
58 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
60 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
61 ftruncate() actually works. In the case of some (cheap) NAS devices,
62 it does not, and so recycling NAS Volumes does not work. The code
63 simply unlink()s the file, then recreates it. This fixes bug #1011.
65 kes First incomplete cut of big malloc blocks for htable.
66 kes Tweak plugin code.
68 kes Plugin debug code + tweak a couple bat dialog layouts
70 kes Fix creating first JobMedia record during Migration to include
71 proper index. This caused slow restores of migrated jobs.
72 kes Temp fix to plugin name file_index.
73 kes Bacula backed up and restored a MySQL database.
75 kes Implement plugin restore.
76 kes Implement parsing of db_driver to give db_type index.
78 kes First cut of plugin restore code.
79 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
80 and do not strip paths on symbolic links.
81 kes Set catalog backup database and user name from values specified on
83 ebl Fix #1031 about wrong pool source information in job report.
86 kes Remove a redundant jcr argument to find_files, match_files, and
88 kes Implement '.status dir header|scheduled|running|terminated' that
89 prints the requested status section. With the exception of the
90 header, the other reports have fields separated by tabs (\t).
92 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
93 a resource embedded run command to find a since time if no explicit
94 since time was supplied on the command line.
95 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
96 that updates the state file at job termination time in addition to
97 when the daemon terminates.
99 kes First version where a plugin did a backup.
100 bpipe-fd.so created a backup file, wrote a test
101 string to it, and Bacua could restore this fabricated file.
103 kes Implement DB Driver = string for the DBI driver.
104 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
105 kes First cut of code for loading Win32 plugin dlls. Implement
106 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
107 and implement a dlfcn.h file based on opengroup's definitions of
110 kes First cut plugin directives.
112 kes Apply patch from bug #1049 to prevent stripping the path on a
114 kes Attempt to fix bug #1047 where stripping a path corrupts the
115 heap. Waiting for feedback.
116 kes Correct the Mount message not to suggest labeling a new tape
117 when doing a restore. Submitted by email by John Stoffel.
118 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
119 FD by using casting. Reported in bug #1042.
121 kes A bit of crypto cleanup. More later.
123 Release Version 2.2.8
125 kes Apply patch from Martin to correct bug #1040, bscan sets existing
127 kes Fixed important spelling error in doc -- bug #1045.
129 ebl Fix bextract to be able to extract non-portable Win32 data to
131 kes Move initialization of read/write res lock earlier in the code.
132 This fixes the crash with a null conf file. This fixes bug
134 kes Redefine CURES in lib/parse_conf to be URES and move it all
135 into lib/parse_conf.c -- this responds to bug #1042, but does
136 not fix it. The fix is not to compile with FORTIFY_SOURCE.
137 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
138 the trunk SVN. I don't think this was reported as a bug.
140 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
142 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
144 kes Add DataDespooling and DataCommitting status (committing is
145 the last despooling).
146 kes Finish implementation of new reservations code noted below.
148 kes Fix bsnprintf for float point numbers. I broke recently when
149 parameterizing some variables. This fixes bug #1036.
150 kes Undo recent reservations changes ... will apply them later
151 when they work better.
153 ebl Fixes #1034 which cause mysql to hang the connection after 8h
154 ebl Change default statistics target of filename.name and path.path
155 fields for PostgreSQL. This speeds lookup by indexes. Thanks
157 kes A few more tweaks to new reservation code. Make sure to clear
158 vol released flag when retaking volume. When reading label and
159 label is bad mark volume unused. When recycling, mark volume
160 unused so it can be renamed.
162 kes Fix reserve_volume() so it doesn't release a volume in use
163 (i.e. a volume entry not marked released). This should be
164 the last part needed to fix bug #1018.
166 kes Move Heartbeat documentation from Job to Director resource.
167 This fixes bug #1033.
169 kes Fix existing switch drive SD code to call autochanger to release
170 any old volume. This must be done to keep the autochanger from
171 releasing subsequently newly reserved volumes in doing a close().
172 This should fix bug #1018.
173 kes Fail if attempting to get console input in batch mode. This
174 should help fail RunScript console commands that are incomplete.
175 kes First cut implementing switch_drive() in SD (not actually called).
177 kes Implement first cut running console commands in a RunScript.
179 ebl Fixes bug #1028 where 'Selection Type' option was not usable
181 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
184 Release Version 2.2.7
186 kes Add new free_tls() entry point so that Win32 builds.
187 kes Fix compile warning in src/lib/util.c
188 kes Fix entry point for edit_job_codes() so that Win32 builds.
189 kes Fix seg fault Frank Sweetser reports in regression testing
190 on his systems. The problem was that the original author of
191 bsnprintf.c did not take into account the side effects of
192 using ++x in the argument to a #define.
193 kes Make SD protocol backward compatible with version 2.2.x.
195 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
196 because Bacula no longer restores sockets.
197 ebl Always use ignorecase fileset option on win32 FD.
199 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
200 that implements double quoting include names in conf files,
201 and also allows piping input by having the first character
202 be a vertical bar (|).
203 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
204 that implement %f in RunScripts to pass the FileSet name.
205 kes Skip leading | when lex input comes from a pipe as suggested
206 by Michael Stapelberg <michael@stapelberg.de>.
208 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
209 Nerijus Baliunas <nerijus@users.sourceforge.net>
211 kes Implement Plugin Directory and plugin events.
213 kes Implement a security enhancement: TLS authentication but no
214 encryption. Enabled by setting 'TLS Authentication = yes'.
215 Note when this is on, TLS encryption is turned OFF!
217 kes This patch corrects a problem where the maximum concurrent storage
218 jobs counter gets out of sync during restore jobs causing jobs to
219 'wait on max Storage jobs'. This patch fixes bug #1009.
221 kes This patch fixes bcopy so that it produces correct Volumes.
223 kes This patch eliminates spurious output to the console during a VerifyVolume
224 job that contains encrypted data. It fixes bug #1024.
226 kes This patch prevents the 'status dir' command from trying to use a scratch
227 volume and possibly moving it from one pool to another. This patch fixes
230 kes Add new include to postgresql.c suggested by Marc Cousins so
231 that it compiles correctly with pgre version 8.3.
233 kes Fix --archivedir addition to configure. Replace it with
234 --with-archivedir in configure.in This fixes the regression
236 kes This patch fixes bug #1012 where the job is canceled because
237 of Max Run Time exceeded when the job has not yet started.
239 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
240 one 'part' to write. Instead of each part being stored on disk,
241 written to DVD, then deleted from disk, all parts are written to disk,
242 and only the last is written and deleted from disk.
243 kes This patch fixes the status command to include the formating string for
244 JS_AttrInsterting. It fixes bug #1021.
245 kes This patch should fix the Mac OS X build problem on the latest
246 Darwin, where sys/types.h was not included correctly (apparently
247 due to a change in the Mac headers). The solution was to explicitly
248 ensure that it is defined for the ./configure.
249 This patch also has a rebuild of configure that includes the Debian
250 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
251 kes This patch should ensure that queued messages to the console are
252 displayed as soon as possible. It should fix bug 1007, but has been
253 reported not to work.
255 kes This patch fixes the infinite loop when trying to increase the
256 maximum number of volumes in a Pool during the add command.
257 This patch fixes bug #1008.
259 Release Version 2.2.6
261 db Remove extra data on estimate command in joblist for bat.
263 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
264 really change anything, but is the beginning of doing it *right*.
265 To do it completely right the LastWritten date must be passed to
266 the SD, but it is not yet done.
267 kes Minor tweaks to some bat restore SQL.
268 kes This patch fixes bug #1003 where putting the message output from
269 a Verify job into the catalog results in a recursive loop. The problem
270 seems to show up only with postgresql (to be verified).
271 kes Correct %x to %p in postgresql debug statement.
273 kes Fix bug #942 where lots of emails where generated when the heartbeat
274 interval was low and Bacula wanted a different tape from the one in
277 ebl Add new SD despooling attributes and Dir inserting attributes
278 job status codes in the catalog (Status table).
280 ebl Use qmake-qt4 instead of qmake when available (debian system).
282 kes Add a security warning to src/cats/make_catalog_backup.in indicating
283 that passing the password via the command line (arg 3) is insecure.
284 This responds to bug #990 (it doesn't fix it).
286 kes Set default debug_level to zero. This corrects bugs #991 and #993.
287 kes Fix a crash in bat when it cannot connect to the Director for example
288 if the Director is not running.
289 kes Remove redundant INDEX (JobId) from File table in the trunk.
291 kes Make explicit exception to GPL in LICENSE to permit linking
292 the Win32 FD with Microsoft VSS code.
293 kes Apply the Solaris package patch from
294 Masopust, Christian <christian.masopust@siemens.com>
295 kes Apply the patch to optionally add a timestamp in the debug output
296 submitted by Mariusz Czulada <manieq@wp.eu>.
298 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
299 backend (sql_strerror). Fixes bug #989
301 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
302 It applied with no problems.
303 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
305 kes Redirect stderror to stdin on mt status command in mtx-changer.in
306 since the status is returned on stderr on Solaris.
307 kes Activate Close button on tray-monitor window. This fixes
309 kes Check for NULL item in parse_conf.c before calling it. In the
310 case of Device, there is no item and this caused a seg fault when
311 Device appears in the conf file.
312 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
313 avoids pulling in config.h multiple times in some new code.
315 kes Fix spurious warning message printed when creating a volume with
316 a LabelFormat. This fixes bug #976.
318 Release Version 2.2.5
320 kes Add JobId in place of Job name in all the Jmsg() output.
321 kes Correct the APP_DESC for the Win32 storage service (remove an e).
323 kes Make maxvol-test and new more strict maxvol2-test work.
324 kes Print JobId in all Jmsg() job output.
326 kes Add new SD despooling attributes and Dir inserting attributes
327 job status codes. This fixes bug 961.
328 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
330 kes Fix doc issue. This fixes bug #963.
331 kes Fix listing performance problems in bat. Pointed out by
333 kes Remove old debug code.
334 kes Fix bat code that tests for Win32. This should fix bug #968
335 kes Query 5 list wrong Vol after migration. This fixes bug #960
337 ebl Fix #969 where user can't change Replace option in restore menu.
339 kes Save jcr in thread specific data (tsd) for each thread.
340 kes Make Dmsg() print JobId as -%u.
341 kes Make Jmsg, Emsg, and others automatically pickup the jobid
342 for the thread if it exists.
343 kes Remove old reservation debug jid code.
344 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
345 ebl Add an option that permit to specify spool size in job
346 definition. (Applying patches/testing/spoolsize_per_job.patch).
347 You must upgrade SD and DIR at the same time.
348 dvl Add new configuration item --archivedir
349 dvl Adjust regression tests to use tmp not /tmp. This will allow
350 multiple concurrent runs of the regression tests.
352 kes Fix race condition that drops final block written to volume.
353 This happens in rare cases with multiple simultaneous jobs
354 when the Volume fills. This fixes bug #964. May be related
355 to bug #935 and possibly #903.
356 kes Eliminate more strerror() and replace with bstrerror().
357 kes Remove BSD getopt and replace with unrestricted IBM version.
358 kes Fix Win32 build for changed calling sequences.
359 kes More tweaks to the mount volume routines to get everything
360 right. Changed variable name from find to have_vol, which is
361 much easier to understand.
362 kes Enhance btimer debug code.
364 kes Fix FD->SD authorization failure, which was due to spurious
365 wakeups from a pthread_cond_timedwait(). Simply check the
366 predicate before continuing. This fixes bug #953.
367 kes Add const char where needed (more to do). Remove temp debug code.
369 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
370 kes Don't overwrite error message in check_tables_version.
372 kes Unlock batch insert tables with same calls used elsewhere.
373 kes Allow starting 59 jobs a second.
374 kes Make SD session key more random.
375 kes Add retry for SQLite opening db if it fails. Probably helps
377 kes Suppress extra error messages during batch insert failure.
379 kes Add jcr to timer packets so if killed message can be sent to job.
380 kes Add JobId to all Dmsg() output.
381 kes Put some FD auth code on dbglvl rather than fixed.
382 kes Return insert attributes error message in db msg buffer to avoid
383 false error messages. Helps fix bug #966.
384 kes Separate batch init error messages. Probably helps fix bug #966.
385 kes Make SD code that contructs attribute insert check string lengths
387 kes If Dir gets an error during inserting attributes, cancel SD.
388 This reduces unnecessary error messages.
390 kes Correct search boolean for getting Volume info
391 ebl Cleanup batch insert code. Probably fixes bug #965.
392 kes Back out one small change to the reservation system (reserving a volume).
393 kes Rework how a Volume is mounted. It is now much more intelligent and
394 will always attempt to use any mounted volume if possible and reduces
395 calls to the Director asking about volumes.
397 kes Turn off some code when batch insert not enabled.
398 kes Edit FD name in connect error messages.
399 kes Rework the reservation system to take into account that the Director
400 might give us a Volume that is different from the current one being
401 used, and to ensure that we don't exceed Maximum Volume Jobs.
402 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
403 fatal error with multiple jobs running'
404 kes Add more debug code in reservation system.
405 kes Implement maxvol-test to check bug #947.
407 kes Add code to handle tray monitor separated from Win32 FD.
408 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
410 kes Add missed return in fixing verify bug -- trunk only.
411 ebl Fix a command parser issue causing a director segfault.
412 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
414 kes Increase the max block size to 4MB fixes bug #957.
415 kes ERABT if user sets min block size > max block size. Fixes bug #956.
416 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
417 is not properly mounted (recognized) during a poll.
418 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
419 Job that has differences reports Verify OK.
420 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
422 ebl Add an option to operate on all pools with update vol parameters.
423 This complete the project 20. Patch from Nigel Stepp.
424 ebl Add history support to bconsole when using readline.
425 Using Ctrl-D to exit doesn't update .bconsole_history
426 kes Modify new volume algorithm to use max MediaId for generating next
427 volume number rather than the count of Volumes. This should essentially
428 eliminate the failure rate if some volumes were deleted. Bug #921.
429 kes Begin implemention of Optimize Job Scheduling.
430 kes Implement restore callback that Dirk and I agreed on for bat
431 restore. This fixes bug #928. Restore of backup of zero files fails.
432 kes Fix SQL Catalog logging which broke with new db_escape_string
435 Release Version 2.2.4
437 kes Fix bacula_cats.def for new db_escape_string().
438 kes Increase size of name string when FD making connection to SD.
439 May fix bug #953. FD->SD connection failure.
441 kes Add code to help Dan debug 2drive-incremental-2disk test.
442 kes Add code to try to fix bug #908.
443 kes Add waits to multiple exit detection code to try to force pid
444 file to always be deleted.
445 kes Restore good dev.tar.gz to rescue set appropriate binary property.
447 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
448 trying to switch drives by checking for blocking before unblocking.
450 kes Cancel storage daemon in all cases where FD reports error. This
451 should fix virtually all cases of bug #920.
452 kes Fix db_escape_string() for MySQL which did not compile.
454 kes Fix error message that was clobbered when Dir tells SD it does not
455 have write permission on Volume. This should fix a minor point
456 in bug #942, but not the main problem.
457 kes Add code to cancel job in SD if FD connection fails. This should
459 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
460 dvl Pass jcr and db into db_escape_string() to enable better escaping
462 kes Fix migration code to get correct Volume name with multiple volumes
463 by skipping |. Fixes bug #936.
464 kes Implement patch supplied by Landon to fix bug #944 where using
465 TLS with bconsole uses 99+% of the CPU.
466 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
468 kes Move patches into patches directory.
470 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
473 ebl Using 'm' in bconsole will show messages like before,
474 and not memory usage.
475 kes Fix bug #935, and probably also bug #903 where files were not
476 restored. MediaId was not properly set in JobMedia record after
479 kes Suppress chown and chmod error messages if the FD is not running
482 kes Apply Martin Simmons' patch that should turn off the new API usage
483 when batch insert is turned off allowing building on older
485 kes Add ./configure search in qwt-qt4 for qwt package
487 kes Bacula is now free of 3rd party GPL copyrighted code!
489 kes Add guid_to_name.c/h which replace idcache.
490 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
492 ebl Detect if new PosgreSQL batch insert API is present.
493 kes Correct incorrect mempool call causing Director crash. Occurs on
494 systems without va_copy().
495 sb Update spec files for 2.2.1 release
497 kes Fix memory pool call in ua_output.c. bug #934.
498 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
499 Add test program to fnmatch.c
501 kes Integrate patch to README.vc8 from
502 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
503 edit it to get it into Unix patch format.
504 kes Implement mkpath.c to replace old FSF makepath.c
506 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
508 Release Version 2.2.1
510 kes Update POTFILES.in
511 kes Cleanup a few underquoted AC_DEFUNs in configure
512 kes Apply patch from Martin Simmons that adds a test for va_copy to
515 kes Fix bug #921 by increasing the number of tries to create a new volume
517 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
518 can be called multiple times. Implement a version for machines
519 without va_copy() that gets a big buffer.
521 kes Integrate more portable zone offset code into bsmtp.c
522 Submitted by Attila Fülöp.
524 kes Fix bad SD->FD return status reported by
525 (James Harper) <james.harper@bendigoit.com.au>
526 ebl Fix a bug in read_close_session which return random status
527 thanks to James Harper
529 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
530 and directory names during restore of single file/directories.
531 kes Add sanity checks to .sql command when string is empty. Hopefully
532 that will resolve Dirks Director crash.
534 kes Apply patch submitted by Martin Simmons that corrects a seg fault
535 in the bsmtp chat subroutine when debug is >= 10.
537 kes Fix Director crash when running bat SQL queries.
538 kes Add David's notes on Item 8: Copy pools.
540 kes Rework projects file to be current and ready for a vote.
541 kes Enhance lex scanner error message.
543 kes Tweak LICENSE file to mention BSD code.
544 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
545 if specified on the ./configure.
546 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
547 This class is intended to allow us to open a second bsock to the
548 Director while in the restore subdialog.
550 kes Fix configure to create bat Makefile before creating dependencies.
551 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
552 kes Add a tooltip to the tray monitor.
553 dvl Set the Director's PID file before dropping privs. This fixes
556 kes Update AUTHORs file
557 kes Increase the default max concurrent jobs to 20 in FD and SD to
558 correspond with the default .conf files.
559 kes Rewrite the Win32 service routines. This eliminates the 3 copies
560 some different, of the same file created by RN when porting the
562 kes Rearrange some of the Win32 directories and the placement of the files
564 kes Set DEVELOPER flag in version.h
566 ========================================================================
567 Release Version 2.2.0
569 kes Apply a second doc patch from Marc.
570 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
571 improves the tips section that discusses how to setup multiple
574 kes Update bat README file.
575 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
576 corrects a typo in the Recycle status check in db_find_next_volume().
577 This will probably fix a number of annoying problems with multiple
579 kes Modify most of dird/msgchan.c to use bsock class calls rather than
580 bnet calls -- no functionality change.
582 kes Modify the Verify output to specify if files are missing on
583 the Volume(s) or disk. Fixes confusion in bug #916.
584 kes When more than one Volume is read in a migration job, the last
585 Volume bytes reported are from the last read volume rather than
586 the last written volume. Fixed. This fixes bug #910.
587 kes Fix display of Recycle flag after update volume=foo recycle=yes.
588 It previously printed New Recyle flag is: no. This fixes bug
591 kes Correct seg fault when switching tape drives during restore.
592 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
593 be used until after 2.2.0 release.
595 kes Remove fnmatch() in SD that permitted wild card specifications.
598 kes Fix %g in filename returned by SQL for browse tree reported by
600 kes Fix configure so that it puts config.out in the cwd rather than
602 kes Attempt to fix the locking problem reported by Eric in bug #906.
603 kes Make berrno class to leave errno unchanged after constructor call.
604 kes Make bnet_server use the heap rather than the stack to allocate
605 its socket fd pointers to avoid a crash at termination. Problem
606 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
608 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
609 and putting it in depkgs-qt along with Qt4.3.
611 kes Rework code in acquire.c that switches drives for reading when
612 the Media Type does not match. This should fix bug #906
614 ebl Fix a director segfault during job setup #907
615 kes Correct seg fault in postgresql when first operation returns no
616 rows. Fixes Dirks File browser problem seg fault with bat.
618 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
619 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
622 kes Implement PopUp YES/NO dialog for bat.
624 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
626 kes Correct RunScript to terminate job in FD on failure.
627 kes Change abort_on_error and AbortJobOnError to fail_on_error
628 and FailJobOnError in RunScripts.
629 kes Minor tweaks of code formating in RunScripts, principally to
630 avoid depassing 80 columns.
632 kes Eliminate one #ifdef Win32 in bsmtp
633 kes Implement grow tool to grow a file for testing very large databases.
634 kes Add big-vol-test to test Bacula seeking with > 5GB.
637 kes Modify find_next_volume() to return all values in Media record.
638 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
642 kes Update Release notes
644 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
645 Warning, in previous beta version, all media get from scratch keep their
648 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
649 This should fix bug #842. Made a note to look at removing the temp
650 files at the end of the install.
651 kes Add ability to mount and unmount a file device providing it is
652 marked as being removable and has the appropriate mount and unmount
653 commands defined in the Device resource. This fixes bug #830.
654 kes When applying a storage override, release all previous storage
655 definitions rather than just prepending the new storage.
656 This should prevent a good deal of confusion.
658 kes Implement ./configure search for qwt libraries.
660 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
661 Win32 FD. This should fix bug #893.
662 kes Remove an unnecessary beep in Win32 init code.
663 kes Update copyright dates in Win32 executable about boxes.
664 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
665 code with a BSD getopt.c and getopt.h.
666 kes Remove sched.h from the Win32 compat directory -- not used.
667 kes Remove the Exit menu item from the Win32 tray monitor. If you really
668 need to shut it down, do it through the services panel or the command
670 kes Remove some inappropriate Bacula FSFE copyrights.
671 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
672 kes Fix regress config non-portable test as pointed out by
673 Florian Heigl <florian.heigl@gmail.com>
674 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
675 as pointed out by Florian Heigl <florian.heigl@gmail.com>
677 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
678 Reported by Frank Sweetser.
682 kes Fix client-only build.
683 kes Integrate client-only fixes for bsys (initgroups) and conio from
684 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
685 kes Make arguments to get_scratch_volume() in same order as other
687 kes Rework the prune_volumes() subroutine so that after purging and
688 no volume found in desired pool, it will check for a scratch
689 volume. This prevents recycling the whole scratch pool.
690 kes Add code to status storage to print boffset_t (largefile support).
692 kes Move qwt (Graphics libarary for Qt4) to depkgs.
693 kes You now need a --with-qwt=<dir> to be able to build bat.
694 kes Update src/win32/cats/bacula_cats.def to include the new
695 db_get_query_dbids() call on Win32.
697 kes Correct a problem when selecting a scratch volume and moving
698 it to another pool that lost some columns.
699 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
700 kes Enhance Autochanger error messages to include Volume and device name.
701 kes Rework prune_volumes() code to take account of InChanger flag,
702 and to handle recycling volumes going to the Scratch pool and
703 current pool because the RecyclePool directive.
704 kes Implement a better and more efficient db_get_query_dbids() to
705 handle creating and passing back a list of DBIds.
709 kes Start work on new more efficient DBId subroutine. First use
710 will be for recycling volume to Scratch inchanger.
711 kes Increase number of JobIds in pruning from 1000 to 10000.
712 This to be replaced by above routine.
713 kes Begin implementation of building Qt4 on Win32.
714 kes Correct typo in fix I added for bad TLS shutdown.
715 kes Pull 2.0.3 patches into patches directory.
716 kes Update Release notes. Include qt-console in line count.
717 kes Update Projects file.
719 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
720 bug in migration code where a job that spanned two volumes
723 kes Implement new BST_DESPOOLING blocked state. Change from locking
724 during despooling in SD to blocking. This means that other threads
725 can work with the device structure, in particular the reservations
726 system while despooling.
728 kes Fix return in reservation message queue that missed clearing
729 the jcr lock (implemented 26Jun07 below).
730 kes Rename a number of dev methods to make locking function names
732 kes Document locking in lock.c. Move lock structures to new file
735 kes Move reservations message lock to lock jcr only this
737 kes Move main SD locking code into lock.c (new file).
738 kes Update Win32 build to include lock.c
742 kes Dirk committed the qwt library code for drawing graphs in bat.
743 kes Tweak install of qwt so that it is integrated with ./configure.
745 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
746 out by Eric (my typo).
747 ebl Fix configure.in to get batch mode enable
748 kes Return correct string from authenticate.cpp in bat when connecting
750 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
751 spurious line drops when using TLS.
752 kes Do not file reparse points when restoring a file that already
755 kes Implement Windows reparse points -- similar to directories, but
756 we do not descend into it. This is a first cut. They seem to
757 be backed up, but restore is not yet tested.
758 kes Remove restore_blocking in tls code when shutting a socket to leave
759 it in blocking mode. Hopefully this will fix the encryption bug
760 reported by Frank Sweetser.
761 kes When opening a file for backup, tell the OS that we are going to
762 read it sequentially -- optimization.
763 kes Change variable names in authenticate_director() to not conflict
764 with member names in bat. Caused great confusion with compiler,
767 kes Queue openssl error messages in case of comm problem.
768 kes Do shutdown() call if socket terminated.
769 kes Remove some duplicated code in tls.c
770 kes Move more of the bsock member variables into private and access
772 kes Add Frank Sweetser's tls-test to the regression suite.
774 kes Add Swedish sv.po file
776 kes Don't print clock skew message in FD if less than 3 seconds diff.
777 kes Add a bit of VSS info to status client.
778 kes Implement a first cut of Vista VSS, using Win2003 code.
782 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
783 loaded tape but uses first drive).
784 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
785 This was indeed a Win32 issue.
787 kes Simplify search of autochanger for in-use Volume.
788 kes Fix exit condition of check for in-use volume. kes Remove
789 inappropriate my_postgresql_free_result() in db_close()
791 kes Fix bad return in FD when encryption signature not found.
792 Probably caused a crash.
793 kes Inhibit missing encryption signature error messages for
794 file types where no signature computed.
795 kes Correct inverted check on autochanger in reservation system.
796 kes Tweak debug code in autochanger reservation.
798 kes Add some additional locking in the cats directory in subroutines
799 that modify packet variables called from batch insert.
800 kes Rework how dcrs are allocated. new_dcr() can now be called
801 with an existing pointer, and it will simply clean it up.
802 This allows the reservation system to test various different
803 devices, and will permit easy device changes.
804 kes A bunch of changes all over to handle new new_dcr() calling
806 kes Work more on the Volume management in the SD. Remember Volumes
807 for tape drives and for autochangers (even virtual disk changers).
808 kes When looking at the Volume list to reserve a drive, handle
809 autochanger names correctly by interating through the changer
810 devices. Also call the Director to see if a Volume is suitable
812 kes Fix some bugs in bscan. Make sure all media records are written.
813 Make sure that valid JobMedia records are written for disk files.
814 Previously they were completely wrong.
815 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
816 that the URLs don't change and so that the developers will all
817 work off the same copy. Rebuild from scrach.
818 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
822 kes Fix seg fault in FD from incorrect digest size.
823 kes Fix argument to non-OpenSSL crypto.c subroutine.
827 kes Remove a few malloc()s from the encryption code.
828 kes Use the class calls to bsock in filed/backup.c and restore.c in
829 place of the old bnet_xxx code.
830 kes Implement code that does an on the fly calculation of the
831 signing digest during restore of encrypted files. It makes
832 a best guess at the algorithm, and if it is not correct, will
833 then revert to the old code which reads the file after it is
835 kes Implement at least one missing crypto stream in stream_to_ascii()
836 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
837 #877 where a reload with bad syntax causes Dir to exit.
839 Cut: 2.1.14 beta (not released)
841 kes Do not free a volume on a tape drive until another volume is
842 mounted and read, or the autochanger unloads the volume.
843 This should help the SD re-use volumes that are already mounted,
844 and should fix bug #886.
845 kes Apply patch from user brettedgar that allows gnome2-console include
846 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
847 kes Apply patch from Lucien Weller that fixes day of week calculation
848 because of DST flag problem. Fixes bug #887.
850 kes Move find_next_appendable_volume() to after acquiring a valid device
851 in reserve.c. This fixes bug #864 -- confirmed by reporter.
853 kes Unable to reproduce bug 872. However added additional testing for
855 kes Bug #874 resolved by documenting SQLite limitations.
856 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
857 kes Bug #881 resolved by removing typo in mtx-changer script.
858 kes Made Frank Sweetser's wiki the official Bacula wiki with his
859 approval. Added a link to the wiki on the web page, and implemented
860 a backup from http://paramount.ind.wpi.edu
862 kes Fix update allfrompool to pass pool name.
864 kes Convert to pure GPL v2 license.
865 kes Fix sscanf problems reported by Peter Buschman that caused
866 a bus error on Solaris.
867 kes Rework (simplify) the select prompt in bat.
868 kes Move get_jobid_from_tid() into lib and create a
870 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
871 should definitely fix the problem of lost error messages in the
873 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
874 kes Eliminate tcpd.h from the project. Enclose the #include from the
875 library with extern C ...
876 kes Add print of signal name when a signal is trapped.
880 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
882 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
883 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
884 makes SQLit3 run 30 times faster, though a bit less safe.
885 kes Implement --with-batch-insert in configure and detection of thread
886 safe libraries. It is on by default, but turned off if no thread
887 safe library (e.g. SQLite 2) is available.
889 kes Fix Bacula PostgreSQL buffer overruns.
890 kes Do better checking for NULL results returned from PostgreSQL;
891 implement retry for failed queries; clear results buffer after
892 failed query. Hopefully this will correct the PostgreSQL failures.
894 kes Implement algorithm to handle only one appendable volume with
895 Prefer Mounted Volumes = no.
896 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
897 returned from a query.
898 kes Make volume lock recursive.
899 kes Implement an additional volume reservation algorithm that
900 starts by considering all reserved volumes then uses the
901 old brute force algorithm of searching the resources to
902 find a suitable device.
903 kes Add new reservations debug code and refine the old code.
904 kes Update the win32/dll/bacula.defs file.
906 kes Tweak reservations algorithm to permit a few more cases, i.e.
907 volume reserved, but on different drive, ...
908 kes Enhance SD status to include Pool and Media Type for drive in a
909 more readable format (a bit longer).
910 kes Fix PostgreSQL double free.
912 kes Minor refactoring of restore decryption code.
913 kes Add code to smartall.c to detect double free of a buffer.
915 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
916 so that bsmtp will create a correct email address (mailbox only).
917 kes Modify 'memory' command so that the buffers are listed as 'In use'
918 to avoid confusion with Orphaned buffers.
919 kes I reworked the OpenSSL include/lib flags to be handled in
920 the standard Bacula way, which should fix bug #863 concerning
921 non-standard OpenSSL libraries.
923 kes Implement Help Browser window for bat.
924 kes Fix reload bug that reset StorageId to zero.
926 kes Fix TLS #ifdefing when TLS turned off.
927 kes Ensure that when labelling a tape with Slot=0 that InChanger
929 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
931 kes Add StartTime to final uar_sel_jobid_temp query so that we can
932 add DISTINCT (required by PostgreSQL).
933 kes Implement BSOCK authenticate_director() method. Eventually will
934 authenicate all daemons.
935 kes Move several more functions into the BSOCK class.
937 kes Add code to tell the OS that we no longer need a cached
938 file that we were reading. In findlib/bfile.c. Also,
939 only cache files that we are reading. Thanks to
940 Tobias Oetiker <tobi@oetiker.ch> for the idea.
941 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
942 kes Implement script to automatically generate cats and dll .def
944 kes Update README.mingw32 to include new .def file generation.
945 kes Correct typo in UTF-8 error message as reported by:
946 jhernandez <julianhernandez@gmail.com>
947 kes Add additional sm_check() code on debug level 1.
948 kes Set default debug level to 1.
949 kes Trap SIGABRT in attempt to get traceback.
951 kes Reduce bat connect timeout from 30 to 15 seconds.
952 kes More restructuring and implementing BSOCK class in place of
954 kes Remove a few unnecessary malloc() tests in crypto code.
955 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
956 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
957 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
959 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
961 kes Fix Verify InitCatalog. The attributes were not pointing to the
962 correct saved location.
963 kes Implement message callback so that GUI is sure to get all
964 daemon messages. Currently displayed in a dialog in bat.
965 kes Ignore SIGUSR2 (Bacula timer) in bat.
966 kes Apply regress patch from bug #859 to allow regress to work
967 with Solaris compiler.
969 kes Begin adding TLS support to bat.
970 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
971 clean up lex.c and make it more readable.
973 kes Move more bnet functions into the BSOCK class.
974 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
975 kes Complete change of berrno strerror() method to bstrerror()
979 kes Cleanup incorrect email addresses in bsmtp.
980 kes Make bat display initial messages rather than discard them.
982 kes First cut of adding .mod to the run command.
983 kes Implement auto display of messages in bat.
984 kes Enhanced preferences to allow all Bacula output to be
987 kes Try to make bsmtp date routines more generic.
988 kes Fixed bug #856 autochanger documentation.
989 kes Rework bsmtp date editing for Win32. This fixes bug #854.
990 kes Add new cats entry point so Win32 builds.
992 kes Attempt to fix bsmtp date editing on OSes without %z editing.
994 kes Do better checking for the MySQL 64 bit libraries looking for both
995 .a and .so libraries.
996 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
997 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
998 kes Require the thread safe version of MySQL during configure. Thanks
999 to Andre Noll for pointing this out.
1000 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1001 continuing in migration code.
1002 kes Apply implementation of tray-monitor font derived from gnome-console
1003 submitted by Andreas Piesk <a.piesk@gmx.net>
1005 kes Eliminate important memory loss in SQLite
1006 kes Fixed the batch insert MySQL thread specific data that was not
1007 being freed. See cats/mysql.c:db_thread_cleanup().
1008 kes Fix restore before command.
1009 kes Convert old hdr.name to name() in a few places.
1010 kes Implement update jobid command.
1011 kes Return all time_t dates in db_get_job_record()
1012 kes Stop watchdog in SD earlier.
1013 kes Put Pool just after Storage in please mount message.
1014 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1017 kes Update the po files.
1018 kes Fix Verify InitCatalog by making it cache attributes.
1020 kes Change name bacula-bat to bat for man 1 page to correspond to
1022 kes Check for client and store NULL pointers in status command. This
1024 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1025 kes Fix sign extended editing of %p.
1026 kes Clean out a little old #ifdefing in cats/mysql.c
1028 kes If time diff between DIR and FD is more than 600 seconds convert
1029 INFO message to WARNING.
1030 kes Implement heap size display in status for all daemons.
1031 kes Attempt to fix MySQL db open memory loss (not successfull).
1032 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1033 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1034 Query. This looks like a MySQL but but by doing extra releases,
1035 the memory goes away. This should fix bug #847.
1037 kes When backup fails, cancel SD before waiting for sd termination.
1038 kes If SD is waiting for FD to connect during cancel, wake up the
1040 kes Fix fsf code so that errno is correctly reported.
1041 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1043 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1044 so that Bacula doesn't later stumble into a seg fault.
1045 kes Use the term Restore Client in the restore Job report.
1046 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1047 the original job's FileSetId.
1048 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1049 spooling in migration jobs. Not yet tested.
1050 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1051 reading conf file from a pipe. However, do it with open_bpipe()
1052 rather than popen. Not yet tested.
1054 kes Fix an ugly bug where the VolCatBytes were getting updated
1056 kes Implement bconsole memory command that prints current memory
1057 usage, plus smartalloc dump.
1058 kes Clarify some error messages in backup, admin, and migrate.
1059 kes Shrink label dialog to smaller size.
1060 kes Invert Cancel OK buttons on restore to be OK Cancel.
1061 kes More strerror() to bstrerror() conversions.
1063 kes Start implementing bstrerror() in place of strerror().
1064 kes Stripping path -- seems to work.
1066 kes Prevent door and port files from being restored (mostly
1068 kes Free an unreleased buffer in compat code.
1069 kes Change console Job name from *Console* to -Console- to eliminate
1070 Win32 filename problems. Put Win32 path separator when creating
1071 Console file. This fixes bug #846.
1072 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1074 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1076 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1077 to force Win32 error message.
1079 kes First cut strip path. The data should be passed to the FD,
1080 but nothing is done with it yet.
1081 kes Enhance the digest and signature routines in the crypto
1082 library to accept a JCR and to use it to print error messages
1083 so that they will go in the Job report rather than the daemon's
1085 kes Simplify some of the verify signature code.
1086 kes Simplify a few of the alternative returns in the signature
1089 ebl Use only POSIX regex instead of GNU regex in breg.c for
1090 File relocation. It fix broken freebsd compilation.
1091 kes Convert all other Dir files to use new ua class message
1093 kes Tentative fix for missing digest signature in bug 807.
1094 kes Correct handle problem in new win32_ftruncate routine.
1095 kes Convert ua_purge.c and ua_update.c to use new ua class
1096 message routines for bat.
1098 kes Correct incorrect installation of LICENSE in Win32 installer.
1099 kes Display LICENSE at the beginning of the Win32 install.
1100 kes Attempt to correct the need for the png files to be installed
1102 kes Reapply my bat.conf install script in qt-console. I think I
1103 editted bat.pro instead of bat.pro.in and it was lost.
1104 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1105 the /var/lock/subsys for subsysdir. Also corrects typos in the
1108 kes First cut update job.
1109 kes Correct configure to include qmake of src/qt-console directory.
1111 kes Make restore job yes/mod/no print in one command so GUI works.
1112 kes First cut implementing backup and restore client.
1113 kes Correct editing in Verify output that caused a seg fault.
1115 kes Insure that bat.conf is not overwritten during installation.
1116 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1117 while I was implementing migration in March 2006 !
1119 ebl Cleanup file relocation, using char *RegexWhere instead of
1120 char *where + bool where_use_regexp
1121 kes Update some manpages and add bat manpage.
1122 kes Make a first cut at converting bacula.spec.in for bwx-console
1124 kes Apply patch from John Goerzen to add hostname as fourth argument
1125 to make_catalog_backup script.
1126 kes Fix typos I introduced into bsmtp.c
1127 kes Make pm_strxxx() routines handle input of NULL pointer. This
1128 is to protect from NULL pointers returned from SQL databases.
1129 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1130 kes Add more debug to FIFO code -- fix fifo regression test.
1132 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1133 kes Add thread timer to bnet_connect() to break from OS if wait time
1136 kes Update Win32 build to include new files, new symbols, and
1138 kes Implement socket level heartbeat (tcp_keepidle)
1139 ebl Commit File relocation patch
1140 kes Make bat have 'make install' target.
1141 kes Warn during install if old gnome-console binary found.
1142 kes Warn during install if old wx-console binary found.
1143 kes Add -8 option to bsmtp command line to add content type utf-8.
1144 Fixes bug #809. (Character coding problem in bsmtp).
1145 kes If < is found in target (from, to, cc) then do not enclose the
1146 target in < > in bsmtp. Fixes bug #772 (malformed address).
1147 kes When printing certain items in dbcheck, stop after 300000.
1148 Fixes bug #822. (dbcheck loops).
1149 kes Incorrect status in Dir after waiting for mount with poll set.
1152 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1154 kes Print waiting to reserve a device every 5 mins.
1156 kes Don't call close_part in label.c if tape and relabel.
1157 kes Don't free volume if busy in close() -- should help with
1159 ebl Fix #824 RunScript bug (After script could be execute twice)
1160 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1161 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1162 Add a regression script to test RunScript
1164 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1167 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1168 deprecated. No additional bugs will be fixed, and they will be dropped
1169 in a future release (probably 2.4.0).
1170 kes Change name of wx-console to bwx-console to make it more Bacula
1172 kes Change the name of gnome-console to bgnome-console to make it
1175 kes Some time in March, a Feature Request with patch from Jorj Bauer
1176 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1178 The ability for the director to validate a Client (FD) CN against
1179 an arbitrary set of patterns rather than the hostname, with
1180 A new 'TLS Allowed CN' set of directives which are implemented
1181 in the Client resource. Then pattern matching is used in place
1182 of hostname matching against the Certificate's CN. As an example, we
1183 have certificates which (a) use a local CA, and (b) have a CN of the
1185 kes Add new/changed entry points to Win32 build
1186 kes Create unaccepted-projects for projects that are not accepted.
1187 kes Simplify locking in the reservations system.
1188 kes Add more debug code in reservations.
1189 kes Make sure error condition on reserving a volume is handled correctly.
1190 kes Correct handling of volume_in_use.
1191 kes Correct handling of initializing a device.
1192 kes Move handling of broadcasting releasing a device into release_device().
1193 kes Correct attaching dcr to dev so that it is only done if device
1194 is properly initiated.
1196 kes Locking debug level tweaks in SD.
1197 kes Tweak new Volume code.
1199 kes Add exec external-command [wait-seconds] to bconsole. This
1200 executes the external-command. Note! normally external-command
1201 should be enclosed in double quotes.
1202 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1203 it should normally be off in a production system.
1205 kes Implement die command for SD so that we can force it to dump.
1206 kes Implement SD lock debug code.
1207 kes Implement new algorithm for keeping Volume list in SD. It
1208 is now owned by the device.
1210 kes Implement new code for freeing in use volumes that should
1211 resolve if not all, some of the problems of multiple drive
1212 tape conflicts described in bug 801.
1214 kes Fix gui/bacula-web/images files in svn.
1215 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1217 ebl Fix a bug in batch mode (in string escape)
1218 kes Correct migration prune SQL typo that crept in in a
1219 recent 2.1.x change.
1221 kes Move bnet_despool() into class in bsock.c
1222 kes Modify job report to include director name and Build OS.
1223 kes Move drop root privilege and check_catalog() before fork.
1224 kes Add update database scripts (version 9 to 10) to updatedb directory.
1226 ebl Check size and age of each file after its backup to see if
1227 it has changed during backup, if 'checkfilechanges' is set.
1228 The FD will do an extra check (stat(2)) after
1229 each file backup. mtime, ctime and size are compared with
1230 'before backup' information. If time or size mismatch, an
1231 error message will be generated. You must upgrade FD to use it.
1233 kes Make database name and user configurable
1234 --with-db-name=xxx --with-db-user=xxx
1235 kes Add back database type to message.c for debugging.
1237 kes Implement dir_sql() which issues an SQL query.
1238 kes Modify bat medialist to use dir_sql() and do some minor C++
1239 formatting as well as eliminating a number of pointers, simplifing
1242 kes Fix some of the mtx-changer grep commands for tape label readers.
1243 kes Convert a number of bsendmsg into the appropriate send/warning/error
1244 message class calls.
1245 kes Suppress the using database message in the .sql command.
1246 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1248 kes Add context menu for floating a window.
1249 kes Some minor cleanup and name changes in qt-console
1250 kes Add doing mt setblk 0 in Win32 mtx-changer.
1251 kes Apply Martin's bug fix to move definition of ENODATA for
1253 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1254 sqlite2 and sqlite3.
1256 kes More pruning cleanup.
1257 kes Turn on wait_for_drive by default in mtx-changer.
1258 kes Turn on Batch insert code by default as it now passes regression.
1259 kes Add ./configure --enable-bat to enable building of Bat.
1260 No install yet though.
1262 kes Implement a new .sql command for bat.
1263 kes Implement code to turn off pruning in obtaining the next volume.
1264 Pruning is turned off for the status dir command, but turned on
1265 for SD requests and for the list nextvolume command.
1267 kes Correct Qmsg() that was not updated correctly when committing a
1268 previous change (probably the recent TLS patch).
1270 kes Write new subroutine is_volume_purged() that explicitly checks
1271 if the Volume is purged, and if so marks it as such. This should
1272 resolve problems reported about needing to mount twice to recycle
1274 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1275 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1276 amount of duplicated code.
1277 kes Do volume pruning only for the Media Type desired (reduces pruning time
1278 if multiple Media Types are in the same pool).
1279 kes Implement more detailed info in the Job report for the Bacula version
1281 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1283 ebl Add bbatch tool to bench database and insert mode.
1284 Fix sql quote stuff in batch mode
1285 Fix sql stuff for mysql
1287 kes Correct problems with am/pm scheduling. Fixes bug #808.
1288 kes Implement new prunning code that prunes up to 1000 jobs at
1289 the same time. The same technique can be applied to a number
1290 of other prune/purge subroutines.
1291 kes Add an insanity check when starting a new tape job to ensure
1292 that the tape position has not been changed. If so fail the
1294 kes Fix Win32 build for dlls to add the folllowing:
1295 src/lib/bsock.c -- new file with new entry points
1296 src/lib/dlist.c -- new entry points
1297 src/cats/sql_create.c -- new entry point
1298 src/cats/sql_cmds.c -- new DATA item exported
1300 ebl batch mode cleanup bscan-test is ok now.
1301 kes Implement SD code to check length of disk volume before appending.
1303 kes Correct return status on db_batch... routines.
1304 kes Add call to db_write_batch_file_records() to migration code.
1305 ebl Fix AfterJob timing
1306 kes Move the checking of the database in initializion of the Director
1307 to after we drop privileges. This avoids the need for both root
1308 and bacula access to the DB.
1309 kes Correct a misplaced variable definition in src/filed/backup.c
1310 kes Correct how the new batch insert db_create_attributes_record()
1311 uses the arguments. Caused a seg fault in bscan.
1312 kes Implement lock() and unlock() methods in DEVICE class.
1313 Implement block() and set_block(xx) methods in DEVICE class.
1314 kes Modify bnet_connect() so that it uses time() to check for the
1315 wait time expiring (on some OSes, some system calls may not
1316 return immediately).
1317 kes Modify Verify to obtain the previous JobId when it is actually
1318 running rather than at schedule time (as it was in 1.38.x).
1319 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1321 kes When checking pid in pid file, continue running if the pid is
1322 the same as ours. This occurs on IRIX after a system crash.
1325 kes Extend new GUI API.
1326 kes Make the ua structure a class, and implement send_msg(),
1327 error_msg(), warning_msg(), and info_msg().
1329 kes Apply fix from for building wx-console on the Mac from
1331 kes Implement new select mechanism for GUI programs.
1332 kes Reorganize initialization of stackedWidgets in bat.
1334 kes Add updated nagios plugin supplied by Christian Masopust.
1336 kes More bat implementation.
1337 kes File migrate bug with Pool Occupancy using mediaid instead
1338 of jobids. Fixes bug #795.
1339 kes Fix orphaned buffers in filed backup and verify due to
1340 crypto buffers not freed during errors. Fixes bug #789.
1341 kes Extend new GUI api code to tree commands.
1342 kes Ensure that tree and dot commands check console ACLs.
1343 kes Permit marking directory with trailing slash.
1344 kes Allow 20 console connections (instead of only 10).
1346 kes Add smartctl call to bacula-sd.conf as an example of getting
1349 kes Modify jobq.c to let simultaneous restore jobs run. This may
1350 cause them to fail if they cannot get a drive.
1351 kes Add Client Connect Wait to Storage daemon to permit users to
1352 modify the time the SD waits for a FD connection.
1354 kes Correct virtual changer check which was backwards. This caused
1355 volumes to be unloaded into slots already occupied.
1357 kes Apply Command ACL filter to JobId list in restore command.
1358 kes Correct typeo in var.c patch.
1360 kes Don't let Bacula prune File or Job records for the current Job.
1361 kes Fix variable substitution pad + inc bug reported (with patch)
1364 kes Correct SQLite log table index as reported by Luca Berra.
1366 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1368 kes Begin implementing new comm signals for API.
1369 kes Fix a few places in lib/message.c where the open fd may
1371 kes Continue implementing lib/bsock.c (real class). Make jcr,
1372 who, host, and port private. There are new methods to access
1373 them for non-class use. This required touching a number of files.
1375 kes Add LANG=C to autoconf/randpass so it works with languages other
1376 than English. Fixes bug #788.
1378 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1380 You will not be able to generate Include/Exclude list any more.
1381 It will be fixed soon.
1382 If you want to use this, you can apply
1383 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1385 kes Restore of sockets created false error messages because Bacula
1386 no longer restores sockets, but the code was still trying to
1387 set the attributes on a non-existent file. Reported by a user.
1388 ebl finish RecyclePool feature
1389 Media will takes Pool.RecyclePool
1390 when moving from Scratch to a Pool or when user will do
1391 update volume=xxx frompool
1392 To use it, add RecyclePool = aPool to your Pool resource
1395 RecyclePool = Scratch
1399 kes Expand new BSOCK class adding signal() and new BNET signals.
1400 kes Begin enhancing the dot commands adding a new API function
1401 that returns more information and will make it easier
1402 to interface to the Director from a program.
1404 kes Make DEVICE fd private. Its new name is m_fd, and can be
1405 obtained with dev->fd() outside the class. This is the
1406 first of many DEVICE members to be made private.
1407 kes Implement Michael Renner's idea on having a virtual disk
1408 changer. I made some minor modifications (e.g. I did not
1409 implement the Virtual Changer directive, but simply set
1410 the Changer Command to an empty string.
1412 kes Implement a BSOCK send() method that writes the whole record
1413 in a single write() request rather than in two.
1414 ebl add update volume=xxx recyclepool=yyyy
1415 volume takes recyclepool from pool when using update volume=xxx from pool
1417 kes Fix encryption deblocking bug, which caused some restored files
1418 to be truncated. This fixes bug #763.
1419 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1420 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1422 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1423 ebl Use btime_t instead of uint64_t in media patch.
1425 kes Optimize the use of the database a bit in the Status dir command.
1426 Only open it when needed, ensure that if any previous database
1427 was opened, it is closed.
1429 kes Correct VolCatBytes bug from media patch.
1430 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1431 in the case of orphaned records.
1432 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1433 and File records in 300K chunks to be more efficient. This
1434 idea came from Juan Luis Frances (if I remember right).
1435 kes Apply Eric's scratch patch that moves a purged Volume to
1436 the RecyclePool. Question: how is RecyclePool set? what
1437 happens to the ScratchPool?
1438 kes Apply Eric's media patch that collects read/write media
1439 times as well as byte counts. This patch requires a
1440 simultaneous upgrade of the DIR and SD. Note, there
1441 should be some way to turn off timing. I'm not sure
1442 times are in Bacula units.
1443 kes Apply Eric's batch-insert patch.
1445 kes Update projects list.
1447 kes Implement Include/Exclude file lists in FD as dlists using
1448 the new dlistString class. This permits efficiently having
1449 large include/exclude lists and completes project Item 25.
1450 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1451 console is authorized to cancel the job. This fixes bug
1453 kes Modify SD so that the VolCatJobs medium record is updated
1454 at the beginning of a Job rather than the end. This
1455 fixes bug #775 where exceeding MaxVolJobs caused jobs
1457 kes Added a mutex around getting and setting Volume information
1458 so that multiple simultaneous jobs will single thread.
1460 Switch to using Subversion
1461 kes Remove src/pygtk-console/ from configure
1463 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1464 plus the entrypoints.
1465 kes Apply patch supplied that corrects debug print
1466 in canceling jobs for max run time. Supplied as
1467 part of bug #621, which was previously fixed.
1469 kes Test on job_canceled() and sd_msg_thread_done inside
1470 loop starting the message thread to avoid a race condition.
1472 kes Remove rl_catch_signal from console.c as it conflicted
1473 with the header definition. Fixes bug #765.
1474 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1476 kes Clarify some stored/acquire messages to indicate if the
1477 problem is with read or append.
1479 kes Fix memory leak with storage ids in cats/sql_get.c
1480 kes Terminate watchdog earlier to avoid reference to released
1481 memory -- reported by Jason Austin.
1482 kes Move closing the database from jobq.c to the director daemon
1483 termination routine. This fixes memory leaks for shadow jobs
1484 (i.e. migration jobs).
1485 kes Free up the unique jobid chain items in migrate.c. This fixes
1486 a memory leak problem.
1487 kes Convert some ugly looking for statements to use foreach_alist
1488 in findlib/find.c. This will facilitate converting the structures
1489 to use dlist (for large include/exclude lists).
1490 kes Fix a bug in the btree.c and btree.h routines, then rename them
1491 rblist and add them to be built in src/lib. Include some new
1492 methods written by Rudolf Cejka that make the code more readable
1493 (hides some of the ugly casting).
1494 kes Add set_next() and set_prev() methods which make the code much more
1495 readable. Also add a new dlistString class that facilitates storing
1496 strings in dlists. To be used in the large include/exclude lists.
1497 kes Make some trivial modifications to lib/tree.h that use rblist
1498 rather than dlist for storing the tree links. This was suggested
1499 by Rudolf Cejka. The result of this is that the restore tree now
1500 uses red-black binary trees rather than simple linked lists. This
1501 should give rather dramatic speed improvements for directories
1502 contining large numbers of directories/files (more than 10000).
1504 kes Fix maxruntime bug #621.
1506 ebl Implement the include JobID in spool file name project.
1507 kes Reorder projects file in order determined by Jan 2007 vote.
1508 kes Implement item #12 on project list -- quick release of FD by
1510 kes Fix open of SQLite3 db where user does not have write permission
1511 so that DIR does not crash. Fixes bug #761.
1513 kes Add back missing @ in Win32 Makefile.
1514 kes Change 'Device not configured to autolabel' from INFO
1516 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1517 which should restart an indefinite # of times.
1518 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1519 other DIR specifications.
1521 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1522 Fix path quoting in SQLite scripts.
1523 Fix problems with SHGetFolderPath.
1525 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1527 kes Fix Job restart on error bug that promotes an Inc to a Full
1528 backup. This should fix bug #755.
1529 kes Add qt-console and first cut of code.
1533 kes Fix Bacula->Documentation link on Win32 to point to index.html
1534 instead of bacula.html. Fixed bug #750.
1535 kes Return JobId in db_get_job_record() when JobId==0. This should
1537 kes Do not release source pointers when restarting a failed job.
1539 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1540 This *should* fix bug #747.
1541 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1544 kes Modify USTORE constructor to set an empty store_source string,
1545 and don't copy the store_source string in a cancel. Hopefully
1546 this will fix Arno's seg fault, bug #744.
1547 kes Add back code to disable conio in configure. Fixes bug #743.
1548 kes Correct the Options scanner in the FD to correctly handle
1549 SHA1 option, which was eating the next option. Reported by
1551 kes Add code to indicate when the SD is spooling, spool wait, and
1552 despooling as requested by Alan Brown.
1554 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob