1 Technical notes on version 2.3
5 kes Rework dir_find_next_appendable_volume to make a bit more effort
6 to find a suitable volume before giving up.
8 kes Make ask_sysop_to_create... to return if waken from wait.
9 This helps get out of blocked conditions.
10 kes Experimental implementation of switch_device in reservations.
11 kes Implement FD version to allow easier protocol changes.
12 kes Add Plugin Options string -- not yet passed to FD.
13 kes Implement PluginOptions ACL.
15 kes Attempt to correct problems with restores with autochangers and
16 use counts going negative
17 kes Rework SD status command and implement API for bat. Implements
18 header, runing waitreservation, devices, volumes, spooling,
19 and terminated status keywords.
20 .status storage=xxx <keyword>
21 kes Clarify TLS error message by adding double quotes around name.
22 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
23 kes Pass jcr to tls routines so debug messages can be handled better.
24 kes Rework jobq resource allocation code, and possibly fix a bug
25 that caused reference counts to get out of sync.
27 kes Rename fd/dir plugin to use Bacula standard underscore.
28 kes Plugin work -- bring dir up to fd level.
29 kes Start implementation of VTL code
30 kes Fix Win32 build after adding new cats subroutine.
32 kes First cut at Duplicate Job implementation.
34 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
35 kes Start PluginOptions string, and refactor a bit of ua_run.c
36 ebl Apply Allan patch that permit to reset recyclepool.
38 kes Test patch -- possible fix or improvement for bug #1053
39 kes Refactor FD and SD status commands to permit new API code in
40 SD, and to fix Win32 build.
41 kes Win32 build is now working.
43 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
44 some ideas in patch from Scott Bailey.
45 kes Begin implementation of duplicate Job control.
46 kes Fix some of Win32 build after recent additions.
47 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
48 which causes the FD to detect whether or not the OS has the
49 honor no dump bit (*BSD systems), and if so, to skip backing up
50 any file with this bit set. The feature is enabled by setting
51 'honor no dump flag = yes' in the Options section of a FileSet.
53 kes Correct po warning message with datarootdir
54 kes Implement more code in dird.c to put configuration parsing in
55 a class rather than use globals.
56 kes Restructure SD status command for implementation of bat API
59 kes Suppress incorrect 'Will not descend from x into y' messages.
60 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
61 daemon globals used by parser.
62 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
64 kes Fix free of plugin_list when none exists.
66 ebl Apply accurate project patch.
68 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
69 on non-mempool object)
70 kes First cut of converting FD .status to work with bat API.
72 .status client=XXX header
73 .status client=XXX running
74 .status client=XXX terminated
75 kes Implement first cut of Copy Job.
76 kes Implement Catalog in Pool resource. It overrides catalog specified
77 in the Client resource.
79 kes Apply patch (with some difficulties) from Joao Henrique Freitas
80 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
82 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
83 ftruncate() actually works. In the case of some (cheap) NAS devices,
84 it does not, and so recycling NAS Volumes does not work. The code
85 simply unlink()s the file, then recreates it. This fixes bug #1011.
87 kes First incomplete cut of big malloc blocks for htable.
88 kes Tweak plugin code.
90 kes Plugin debug code + tweak a couple bat dialog layouts
92 kes Fix creating first JobMedia record during Migration to include
93 proper index. This caused slow restores of migrated jobs.
94 kes Temp fix to plugin name file_index.
95 kes Bacula backed up and restored a MySQL database.
97 kes Implement plugin restore.
98 kes Implement parsing of db_driver to give db_type index.
100 kes First cut of plugin restore code.
101 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
102 and do not strip paths on symbolic links.
103 kes Set catalog backup database and user name from values specified on
104 the ./configure line.
105 ebl Fix #1031 about wrong pool source information in job report.
108 kes Remove a redundant jcr argument to find_files, match_files, and
110 kes Implement '.status dir header|scheduled|running|terminated' that
111 prints the requested status section. With the exception of the
112 header, the other reports have fields separated by tabs (\t).
114 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
115 a resource embedded run command to find a since time if no explicit
116 since time was supplied on the command line.
117 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
118 that updates the state file at job termination time in addition to
119 when the daemon terminates.
121 kes First version where a plugin did a backup.
122 bpipe-fd.so created a backup file, wrote a test
123 string to it, and Bacua could restore this fabricated file.
125 kes Implement DB Driver = string for the DBI driver.
126 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
127 kes First cut of code for loading Win32 plugin dlls. Implement
128 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
129 and implement a dlfcn.h file based on opengroup's definitions of
132 kes First cut plugin directives.
134 kes Apply patch from bug #1049 to prevent stripping the path on a
136 kes Attempt to fix bug #1047 where stripping a path corrupts the
137 heap. Waiting for feedback.
138 kes Correct the Mount message not to suggest labeling a new tape
139 when doing a restore. Submitted by email by John Stoffel.
140 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
141 FD by using casting. Reported in bug #1042.
143 kes A bit of crypto cleanup. More later.
145 Release Version 2.2.8
147 kes Apply patch from Martin to correct bug #1040, bscan sets existing
149 kes Fixed important spelling error in doc -- bug #1045.
151 ebl Fix bextract to be able to extract non-portable Win32 data to
153 kes Move initialization of read/write res lock earlier in the code.
154 This fixes the crash with a null conf file. This fixes bug
156 kes Redefine CURES in lib/parse_conf to be URES and move it all
157 into lib/parse_conf.c -- this responds to bug #1042, but does
158 not fix it. The fix is not to compile with FORTIFY_SOURCE.
159 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
160 the trunk SVN. I don't think this was reported as a bug.
162 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
164 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
166 kes Add DataDespooling and DataCommitting status (committing is
167 the last despooling).
168 kes Finish implementation of new reservations code noted below.
170 kes Fix bsnprintf for float point numbers. I broke recently when
171 parameterizing some variables. This fixes bug #1036.
172 kes Undo recent reservations changes ... will apply them later
173 when they work better.
175 ebl Fixes #1034 which cause mysql to hang the connection after 8h
176 ebl Change default statistics target of filename.name and path.path
177 fields for PostgreSQL. This speeds lookup by indexes. Thanks
179 kes A few more tweaks to new reservation code. Make sure to clear
180 vol released flag when retaking volume. When reading label and
181 label is bad mark volume unused. When recycling, mark volume
182 unused so it can be renamed.
184 kes Fix reserve_volume() so it doesn't release a volume in use
185 (i.e. a volume entry not marked released). This should be
186 the last part needed to fix bug #1018.
188 kes Move Heartbeat documentation from Job to Director resource.
189 This fixes bug #1033.
191 kes Fix existing switch drive SD code to call autochanger to release
192 any old volume. This must be done to keep the autochanger from
193 releasing subsequently newly reserved volumes in doing a close().
194 This should fix bug #1018.
195 kes Fail if attempting to get console input in batch mode. This
196 should help fail RunScript console commands that are incomplete.
197 kes First cut implementing switch_drive() in SD (not actually called).
199 kes Implement first cut running console commands in a RunScript.
201 ebl Fixes bug #1028 where 'Selection Type' option was not usable
203 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
206 Release Version 2.2.7
208 kes Add new free_tls() entry point so that Win32 builds.
209 kes Fix compile warning in src/lib/util.c
210 kes Fix entry point for edit_job_codes() so that Win32 builds.
211 kes Fix seg fault Frank Sweetser reports in regression testing
212 on his systems. The problem was that the original author of
213 bsnprintf.c did not take into account the side effects of
214 using ++x in the argument to a #define.
215 kes Make SD protocol backward compatible with version 2.2.x.
217 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
218 because Bacula no longer restores sockets.
219 ebl Always use ignorecase fileset option on win32 FD.
221 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
222 that implements double quoting include names in conf files,
223 and also allows piping input by having the first character
224 be a vertical bar (|).
225 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
226 that implement %f in RunScripts to pass the FileSet name.
227 kes Skip leading | when lex input comes from a pipe as suggested
228 by Michael Stapelberg <michael@stapelberg.de>.
230 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
231 Nerijus Baliunas <nerijus@users.sourceforge.net>
233 kes Implement Plugin Directory and plugin events.
235 kes Implement a security enhancement: TLS authentication but no
236 encryption. Enabled by setting 'TLS Authentication = yes'.
237 Note when this is on, TLS encryption is turned OFF!
239 kes This patch corrects a problem where the maximum concurrent storage
240 jobs counter gets out of sync during restore jobs causing jobs to
241 'wait on max Storage jobs'. This patch fixes bug #1009.
243 kes This patch fixes bcopy so that it produces correct Volumes.
245 kes This patch eliminates spurious output to the console during a VerifyVolume
246 job that contains encrypted data. It fixes bug #1024.
248 kes This patch prevents the 'status dir' command from trying to use a scratch
249 volume and possibly moving it from one pool to another. This patch fixes
252 kes Add new include to postgresql.c suggested by Marc Cousins so
253 that it compiles correctly with pgre version 8.3.
255 kes Fix --archivedir addition to configure. Replace it with
256 --with-archivedir in configure.in This fixes the regression
258 kes This patch fixes bug #1012 where the job is canceled because
259 of Max Run Time exceeded when the job has not yet started.
261 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
262 one 'part' to write. Instead of each part being stored on disk,
263 written to DVD, then deleted from disk, all parts are written to disk,
264 and only the last is written and deleted from disk.
265 kes This patch fixes the status command to include the formating string for
266 JS_AttrInsterting. It fixes bug #1021.
267 kes This patch should fix the Mac OS X build problem on the latest
268 Darwin, where sys/types.h was not included correctly (apparently
269 due to a change in the Mac headers). The solution was to explicitly
270 ensure that it is defined for the ./configure.
271 This patch also has a rebuild of configure that includes the Debian
272 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
273 kes This patch should ensure that queued messages to the console are
274 displayed as soon as possible. It should fix bug 1007, but has been
275 reported not to work.
277 kes This patch fixes the infinite loop when trying to increase the
278 maximum number of volumes in a Pool during the add command.
279 This patch fixes bug #1008.
281 Release Version 2.2.6
283 db Remove extra data on estimate command in joblist for bat.
285 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
286 really change anything, but is the beginning of doing it *right*.
287 To do it completely right the LastWritten date must be passed to
288 the SD, but it is not yet done.
289 kes Minor tweaks to some bat restore SQL.
290 kes This patch fixes bug #1003 where putting the message output from
291 a Verify job into the catalog results in a recursive loop. The problem
292 seems to show up only with postgresql (to be verified).
293 kes Correct %x to %p in postgresql debug statement.
295 kes Fix bug #942 where lots of emails where generated when the heartbeat
296 interval was low and Bacula wanted a different tape from the one in
299 ebl Add new SD despooling attributes and Dir inserting attributes
300 job status codes in the catalog (Status table).
302 ebl Use qmake-qt4 instead of qmake when available (debian system).
304 kes Add a security warning to src/cats/make_catalog_backup.in indicating
305 that passing the password via the command line (arg 3) is insecure.
306 This responds to bug #990 (it doesn't fix it).
308 kes Set default debug_level to zero. This corrects bugs #991 and #993.
309 kes Fix a crash in bat when it cannot connect to the Director for example
310 if the Director is not running.
311 kes Remove redundant INDEX (JobId) from File table in the trunk.
313 kes Make explicit exception to GPL in LICENSE to permit linking
314 the Win32 FD with Microsoft VSS code.
315 kes Apply the Solaris package patch from
316 Masopust, Christian <christian.masopust@siemens.com>
317 kes Apply the patch to optionally add a timestamp in the debug output
318 submitted by Mariusz Czulada <manieq@wp.eu>.
320 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
321 backend (sql_strerror). Fixes bug #989
323 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
324 It applied with no problems.
325 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
327 kes Redirect stderror to stdin on mt status command in mtx-changer.in
328 since the status is returned on stderr on Solaris.
329 kes Activate Close button on tray-monitor window. This fixes
331 kes Check for NULL item in parse_conf.c before calling it. In the
332 case of Device, there is no item and this caused a seg fault when
333 Device appears in the conf file.
334 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
335 avoids pulling in config.h multiple times in some new code.
337 kes Fix spurious warning message printed when creating a volume with
338 a LabelFormat. This fixes bug #976.
340 Release Version 2.2.5
342 kes Add JobId in place of Job name in all the Jmsg() output.
343 kes Correct the APP_DESC for the Win32 storage service (remove an e).
345 kes Make maxvol-test and new more strict maxvol2-test work.
346 kes Print JobId in all Jmsg() job output.
348 kes Add new SD despooling attributes and Dir inserting attributes
349 job status codes. This fixes bug 961.
350 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
352 kes Fix doc issue. This fixes bug #963.
353 kes Fix listing performance problems in bat. Pointed out by
355 kes Remove old debug code.
356 kes Fix bat code that tests for Win32. This should fix bug #968
357 kes Query 5 list wrong Vol after migration. This fixes bug #960
359 ebl Fix #969 where user can't change Replace option in restore menu.
361 kes Save jcr in thread specific data (tsd) for each thread.
362 kes Make Dmsg() print JobId as -%u.
363 kes Make Jmsg, Emsg, and others automatically pickup the jobid
364 for the thread if it exists.
365 kes Remove old reservation debug jid code.
366 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
367 ebl Add an option that permit to specify spool size in job
368 definition. (Applying patches/testing/spoolsize_per_job.patch).
369 You must upgrade SD and DIR at the same time.
370 dvl Add new configuration item --archivedir
371 dvl Adjust regression tests to use tmp not /tmp. This will allow
372 multiple concurrent runs of the regression tests.
374 kes Fix race condition that drops final block written to volume.
375 This happens in rare cases with multiple simultaneous jobs
376 when the Volume fills. This fixes bug #964. May be related
377 to bug #935 and possibly #903.
378 kes Eliminate more strerror() and replace with bstrerror().
379 kes Remove BSD getopt and replace with unrestricted IBM version.
380 kes Fix Win32 build for changed calling sequences.
381 kes More tweaks to the mount volume routines to get everything
382 right. Changed variable name from find to have_vol, which is
383 much easier to understand.
384 kes Enhance btimer debug code.
386 kes Fix FD->SD authorization failure, which was due to spurious
387 wakeups from a pthread_cond_timedwait(). Simply check the
388 predicate before continuing. This fixes bug #953.
389 kes Add const char where needed (more to do). Remove temp debug code.
391 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
392 kes Don't overwrite error message in check_tables_version.
394 kes Unlock batch insert tables with same calls used elsewhere.
395 kes Allow starting 59 jobs a second.
396 kes Make SD session key more random.
397 kes Add retry for SQLite opening db if it fails. Probably helps
399 kes Suppress extra error messages during batch insert failure.
401 kes Add jcr to timer packets so if killed message can be sent to job.
402 kes Add JobId to all Dmsg() output.
403 kes Put some FD auth code on dbglvl rather than fixed.
404 kes Return insert attributes error message in db msg buffer to avoid
405 false error messages. Helps fix bug #966.
406 kes Separate batch init error messages. Probably helps fix bug #966.
407 kes Make SD code that contructs attribute insert check string lengths
409 kes If Dir gets an error during inserting attributes, cancel SD.
410 This reduces unnecessary error messages.
412 kes Correct search boolean for getting Volume info
413 ebl Cleanup batch insert code. Probably fixes bug #965.
414 kes Back out one small change to the reservation system (reserving a volume).
415 kes Rework how a Volume is mounted. It is now much more intelligent and
416 will always attempt to use any mounted volume if possible and reduces
417 calls to the Director asking about volumes.
419 kes Turn off some code when batch insert not enabled.
420 kes Edit FD name in connect error messages.
421 kes Rework the reservation system to take into account that the Director
422 might give us a Volume that is different from the current one being
423 used, and to ensure that we don't exceed Maximum Volume Jobs.
424 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
425 fatal error with multiple jobs running'
426 kes Add more debug code in reservation system.
427 kes Implement maxvol-test to check bug #947.
429 kes Add code to handle tray monitor separated from Win32 FD.
430 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
432 kes Add missed return in fixing verify bug -- trunk only.
433 ebl Fix a command parser issue causing a director segfault.
434 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
436 kes Increase the max block size to 4MB fixes bug #957.
437 kes ERABT if user sets min block size > max block size. Fixes bug #956.
438 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
439 is not properly mounted (recognized) during a poll.
440 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
441 Job that has differences reports Verify OK.
442 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
444 ebl Add an option to operate on all pools with update vol parameters.
445 This complete the project 20. Patch from Nigel Stepp.
446 ebl Add history support to bconsole when using readline.
447 Using Ctrl-D to exit doesn't update .bconsole_history
448 kes Modify new volume algorithm to use max MediaId for generating next
449 volume number rather than the count of Volumes. This should essentially
450 eliminate the failure rate if some volumes were deleted. Bug #921.
451 kes Begin implemention of Optimize Job Scheduling.
452 kes Implement restore callback that Dirk and I agreed on for bat
453 restore. This fixes bug #928. Restore of backup of zero files fails.
454 kes Fix SQL Catalog logging which broke with new db_escape_string
457 Release Version 2.2.4
459 kes Fix bacula_cats.def for new db_escape_string().
460 kes Increase size of name string when FD making connection to SD.
461 May fix bug #953. FD->SD connection failure.
463 kes Add code to help Dan debug 2drive-incremental-2disk test.
464 kes Add code to try to fix bug #908.
465 kes Add waits to multiple exit detection code to try to force pid
466 file to always be deleted.
467 kes Restore good dev.tar.gz to rescue set appropriate binary property.
469 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
470 trying to switch drives by checking for blocking before unblocking.
472 kes Cancel storage daemon in all cases where FD reports error. This
473 should fix virtually all cases of bug #920.
474 kes Fix db_escape_string() for MySQL which did not compile.
476 kes Fix error message that was clobbered when Dir tells SD it does not
477 have write permission on Volume. This should fix a minor point
478 in bug #942, but not the main problem.
479 kes Add code to cancel job in SD if FD connection fails. This should
481 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
482 dvl Pass jcr and db into db_escape_string() to enable better escaping
484 kes Fix migration code to get correct Volume name with multiple volumes
485 by skipping |. Fixes bug #936.
486 kes Implement patch supplied by Landon to fix bug #944 where using
487 TLS with bconsole uses 99+% of the CPU.
488 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
490 kes Move patches into patches directory.
492 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
495 ebl Using 'm' in bconsole will show messages like before,
496 and not memory usage.
497 kes Fix bug #935, and probably also bug #903 where files were not
498 restored. MediaId was not properly set in JobMedia record after
501 kes Suppress chown and chmod error messages if the FD is not running
504 kes Apply Martin Simmons' patch that should turn off the new API usage
505 when batch insert is turned off allowing building on older
507 kes Add ./configure search in qwt-qt4 for qwt package
509 kes Bacula is now free of 3rd party GPL copyrighted code!
511 kes Add guid_to_name.c/h which replace idcache.
512 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
514 ebl Detect if new PosgreSQL batch insert API is present.
515 kes Correct incorrect mempool call causing Director crash. Occurs on
516 systems without va_copy().
517 sb Update spec files for 2.2.1 release
519 kes Fix memory pool call in ua_output.c. bug #934.
520 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
521 Add test program to fnmatch.c
523 kes Integrate patch to README.vc8 from
524 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
525 edit it to get it into Unix patch format.
526 kes Implement mkpath.c to replace old FSF makepath.c
528 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
530 Release Version 2.2.1
532 kes Update POTFILES.in
533 kes Cleanup a few underquoted AC_DEFUNs in configure
534 kes Apply patch from Martin Simmons that adds a test for va_copy to
537 kes Fix bug #921 by increasing the number of tries to create a new volume
539 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
540 can be called multiple times. Implement a version for machines
541 without va_copy() that gets a big buffer.
543 kes Integrate more portable zone offset code into bsmtp.c
544 Submitted by Attila Fülöp.
546 kes Fix bad SD->FD return status reported by
547 (James Harper) <james.harper@bendigoit.com.au>
548 ebl Fix a bug in read_close_session which return random status
549 thanks to James Harper
551 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
552 and directory names during restore of single file/directories.
553 kes Add sanity checks to .sql command when string is empty. Hopefully
554 that will resolve Dirks Director crash.
556 kes Apply patch submitted by Martin Simmons that corrects a seg fault
557 in the bsmtp chat subroutine when debug is >= 10.
559 kes Fix Director crash when running bat SQL queries.
560 kes Add David's notes on Item 8: Copy pools.
562 kes Rework projects file to be current and ready for a vote.
563 kes Enhance lex scanner error message.
565 kes Tweak LICENSE file to mention BSD code.
566 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
567 if specified on the ./configure.
568 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
569 This class is intended to allow us to open a second bsock to the
570 Director while in the restore subdialog.
572 kes Fix configure to create bat Makefile before creating dependencies.
573 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
574 kes Add a tooltip to the tray monitor.
575 dvl Set the Director's PID file before dropping privs. This fixes
578 kes Update AUTHORs file
579 kes Increase the default max concurrent jobs to 20 in FD and SD to
580 correspond with the default .conf files.
581 kes Rewrite the Win32 service routines. This eliminates the 3 copies
582 some different, of the same file created by RN when porting the
584 kes Rearrange some of the Win32 directories and the placement of the files
586 kes Set DEVELOPER flag in version.h
588 ========================================================================
589 Release Version 2.2.0
591 kes Apply a second doc patch from Marc.
592 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
593 improves the tips section that discusses how to setup multiple
596 kes Update bat README file.
597 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
598 corrects a typo in the Recycle status check in db_find_next_volume().
599 This will probably fix a number of annoying problems with multiple
601 kes Modify most of dird/msgchan.c to use bsock class calls rather than
602 bnet calls -- no functionality change.
604 kes Modify the Verify output to specify if files are missing on
605 the Volume(s) or disk. Fixes confusion in bug #916.
606 kes When more than one Volume is read in a migration job, the last
607 Volume bytes reported are from the last read volume rather than
608 the last written volume. Fixed. This fixes bug #910.
609 kes Fix display of Recycle flag after update volume=foo recycle=yes.
610 It previously printed New Recyle flag is: no. This fixes bug
613 kes Correct seg fault when switching tape drives during restore.
614 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
615 be used until after 2.2.0 release.
617 kes Remove fnmatch() in SD that permitted wild card specifications.
620 kes Fix %g in filename returned by SQL for browse tree reported by
622 kes Fix configure so that it puts config.out in the cwd rather than
624 kes Attempt to fix the locking problem reported by Eric in bug #906.
625 kes Make berrno class to leave errno unchanged after constructor call.
626 kes Make bnet_server use the heap rather than the stack to allocate
627 its socket fd pointers to avoid a crash at termination. Problem
628 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
630 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
631 and putting it in depkgs-qt along with Qt4.3.
633 kes Rework code in acquire.c that switches drives for reading when
634 the Media Type does not match. This should fix bug #906
636 ebl Fix a director segfault during job setup #907
637 kes Correct seg fault in postgresql when first operation returns no
638 rows. Fixes Dirks File browser problem seg fault with bat.
640 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
641 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
644 kes Implement PopUp YES/NO dialog for bat.
646 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
648 kes Correct RunScript to terminate job in FD on failure.
649 kes Change abort_on_error and AbortJobOnError to fail_on_error
650 and FailJobOnError in RunScripts.
651 kes Minor tweaks of code formating in RunScripts, principally to
652 avoid depassing 80 columns.
654 kes Eliminate one #ifdef Win32 in bsmtp
655 kes Implement grow tool to grow a file for testing very large databases.
656 kes Add big-vol-test to test Bacula seeking with > 5GB.
659 kes Modify find_next_volume() to return all values in Media record.
660 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
664 kes Update Release notes
666 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
667 Warning, in previous beta version, all media get from scratch keep their
670 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
671 This should fix bug #842. Made a note to look at removing the temp
672 files at the end of the install.
673 kes Add ability to mount and unmount a file device providing it is
674 marked as being removable and has the appropriate mount and unmount
675 commands defined in the Device resource. This fixes bug #830.
676 kes When applying a storage override, release all previous storage
677 definitions rather than just prepending the new storage.
678 This should prevent a good deal of confusion.
680 kes Implement ./configure search for qwt libraries.
682 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
683 Win32 FD. This should fix bug #893.
684 kes Remove an unnecessary beep in Win32 init code.
685 kes Update copyright dates in Win32 executable about boxes.
686 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
687 code with a BSD getopt.c and getopt.h.
688 kes Remove sched.h from the Win32 compat directory -- not used.
689 kes Remove the Exit menu item from the Win32 tray monitor. If you really
690 need to shut it down, do it through the services panel or the command
692 kes Remove some inappropriate Bacula FSFE copyrights.
693 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
694 kes Fix regress config non-portable test as pointed out by
695 Florian Heigl <florian.heigl@gmail.com>
696 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
697 as pointed out by Florian Heigl <florian.heigl@gmail.com>
699 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
700 Reported by Frank Sweetser.
704 kes Fix client-only build.
705 kes Integrate client-only fixes for bsys (initgroups) and conio from
706 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
707 kes Make arguments to get_scratch_volume() in same order as other
709 kes Rework the prune_volumes() subroutine so that after purging and
710 no volume found in desired pool, it will check for a scratch
711 volume. This prevents recycling the whole scratch pool.
712 kes Add code to status storage to print boffset_t (largefile support).
714 kes Move qwt (Graphics libarary for Qt4) to depkgs.
715 kes You now need a --with-qwt=<dir> to be able to build bat.
716 kes Update src/win32/cats/bacula_cats.def to include the new
717 db_get_query_dbids() call on Win32.
719 kes Correct a problem when selecting a scratch volume and moving
720 it to another pool that lost some columns.
721 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
722 kes Enhance Autochanger error messages to include Volume and device name.
723 kes Rework prune_volumes() code to take account of InChanger flag,
724 and to handle recycling volumes going to the Scratch pool and
725 current pool because the RecyclePool directive.
726 kes Implement a better and more efficient db_get_query_dbids() to
727 handle creating and passing back a list of DBIds.
731 kes Start work on new more efficient DBId subroutine. First use
732 will be for recycling volume to Scratch inchanger.
733 kes Increase number of JobIds in pruning from 1000 to 10000.
734 This to be replaced by above routine.
735 kes Begin implementation of building Qt4 on Win32.
736 kes Correct typo in fix I added for bad TLS shutdown.
737 kes Pull 2.0.3 patches into patches directory.
738 kes Update Release notes. Include qt-console in line count.
739 kes Update Projects file.
741 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
742 bug in migration code where a job that spanned two volumes
745 kes Implement new BST_DESPOOLING blocked state. Change from locking
746 during despooling in SD to blocking. This means that other threads
747 can work with the device structure, in particular the reservations
748 system while despooling.
750 kes Fix return in reservation message queue that missed clearing
751 the jcr lock (implemented 26Jun07 below).
752 kes Rename a number of dev methods to make locking function names
754 kes Document locking in lock.c. Move lock structures to new file
757 kes Move reservations message lock to lock jcr only this
759 kes Move main SD locking code into lock.c (new file).
760 kes Update Win32 build to include lock.c
764 kes Dirk committed the qwt library code for drawing graphs in bat.
765 kes Tweak install of qwt so that it is integrated with ./configure.
767 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
768 out by Eric (my typo).
769 ebl Fix configure.in to get batch mode enable
770 kes Return correct string from authenticate.cpp in bat when connecting
772 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
773 spurious line drops when using TLS.
774 kes Do not file reparse points when restoring a file that already
777 kes Implement Windows reparse points -- similar to directories, but
778 we do not descend into it. This is a first cut. They seem to
779 be backed up, but restore is not yet tested.
780 kes Remove restore_blocking in tls code when shutting a socket to leave
781 it in blocking mode. Hopefully this will fix the encryption bug
782 reported by Frank Sweetser.
783 kes When opening a file for backup, tell the OS that we are going to
784 read it sequentially -- optimization.
785 kes Change variable names in authenticate_director() to not conflict
786 with member names in bat. Caused great confusion with compiler,
789 kes Queue openssl error messages in case of comm problem.
790 kes Do shutdown() call if socket terminated.
791 kes Remove some duplicated code in tls.c
792 kes Move more of the bsock member variables into private and access
794 kes Add Frank Sweetser's tls-test to the regression suite.
796 kes Add Swedish sv.po file
798 kes Don't print clock skew message in FD if less than 3 seconds diff.
799 kes Add a bit of VSS info to status client.
800 kes Implement a first cut of Vista VSS, using Win2003 code.
804 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
805 loaded tape but uses first drive).
806 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
807 This was indeed a Win32 issue.
809 kes Simplify search of autochanger for in-use Volume.
810 kes Fix exit condition of check for in-use volume. kes Remove
811 inappropriate my_postgresql_free_result() in db_close()
813 kes Fix bad return in FD when encryption signature not found.
814 Probably caused a crash.
815 kes Inhibit missing encryption signature error messages for
816 file types where no signature computed.
817 kes Correct inverted check on autochanger in reservation system.
818 kes Tweak debug code in autochanger reservation.
820 kes Add some additional locking in the cats directory in subroutines
821 that modify packet variables called from batch insert.
822 kes Rework how dcrs are allocated. new_dcr() can now be called
823 with an existing pointer, and it will simply clean it up.
824 This allows the reservation system to test various different
825 devices, and will permit easy device changes.
826 kes A bunch of changes all over to handle new new_dcr() calling
828 kes Work more on the Volume management in the SD. Remember Volumes
829 for tape drives and for autochangers (even virtual disk changers).
830 kes When looking at the Volume list to reserve a drive, handle
831 autochanger names correctly by interating through the changer
832 devices. Also call the Director to see if a Volume is suitable
834 kes Fix some bugs in bscan. Make sure all media records are written.
835 Make sure that valid JobMedia records are written for disk files.
836 Previously they were completely wrong.
837 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
838 that the URLs don't change and so that the developers will all
839 work off the same copy. Rebuild from scrach.
840 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
844 kes Fix seg fault in FD from incorrect digest size.
845 kes Fix argument to non-OpenSSL crypto.c subroutine.
849 kes Remove a few malloc()s from the encryption code.
850 kes Use the class calls to bsock in filed/backup.c and restore.c in
851 place of the old bnet_xxx code.
852 kes Implement code that does an on the fly calculation of the
853 signing digest during restore of encrypted files. It makes
854 a best guess at the algorithm, and if it is not correct, will
855 then revert to the old code which reads the file after it is
857 kes Implement at least one missing crypto stream in stream_to_ascii()
858 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
859 #877 where a reload with bad syntax causes Dir to exit.
861 Cut: 2.1.14 beta (not released)
863 kes Do not free a volume on a tape drive until another volume is
864 mounted and read, or the autochanger unloads the volume.
865 This should help the SD re-use volumes that are already mounted,
866 and should fix bug #886.
867 kes Apply patch from user brettedgar that allows gnome2-console include
868 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
869 kes Apply patch from Lucien Weller that fixes day of week calculation
870 because of DST flag problem. Fixes bug #887.
872 kes Move find_next_appendable_volume() to after acquiring a valid device
873 in reserve.c. This fixes bug #864 -- confirmed by reporter.
875 kes Unable to reproduce bug 872. However added additional testing for
877 kes Bug #874 resolved by documenting SQLite limitations.
878 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
879 kes Bug #881 resolved by removing typo in mtx-changer script.
880 kes Made Frank Sweetser's wiki the official Bacula wiki with his
881 approval. Added a link to the wiki on the web page, and implemented
882 a backup from http://paramount.ind.wpi.edu
884 kes Fix update allfrompool to pass pool name.
886 kes Convert to pure GPL v2 license.
887 kes Fix sscanf problems reported by Peter Buschman that caused
888 a bus error on Solaris.
889 kes Rework (simplify) the select prompt in bat.
890 kes Move get_jobid_from_tid() into lib and create a
892 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
893 should definitely fix the problem of lost error messages in the
895 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
896 kes Eliminate tcpd.h from the project. Enclose the #include from the
897 library with extern C ...
898 kes Add print of signal name when a signal is trapped.
902 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
904 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
905 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
906 makes SQLit3 run 30 times faster, though a bit less safe.
907 kes Implement --with-batch-insert in configure and detection of thread
908 safe libraries. It is on by default, but turned off if no thread
909 safe library (e.g. SQLite 2) is available.
911 kes Fix Bacula PostgreSQL buffer overruns.
912 kes Do better checking for NULL results returned from PostgreSQL;
913 implement retry for failed queries; clear results buffer after
914 failed query. Hopefully this will correct the PostgreSQL failures.
916 kes Implement algorithm to handle only one appendable volume with
917 Prefer Mounted Volumes = no.
918 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
919 returned from a query.
920 kes Make volume lock recursive.
921 kes Implement an additional volume reservation algorithm that
922 starts by considering all reserved volumes then uses the
923 old brute force algorithm of searching the resources to
924 find a suitable device.
925 kes Add new reservations debug code and refine the old code.
926 kes Update the win32/dll/bacula.defs file.
928 kes Tweak reservations algorithm to permit a few more cases, i.e.
929 volume reserved, but on different drive, ...
930 kes Enhance SD status to include Pool and Media Type for drive in a
931 more readable format (a bit longer).
932 kes Fix PostgreSQL double free.
934 kes Minor refactoring of restore decryption code.
935 kes Add code to smartall.c to detect double free of a buffer.
937 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
938 so that bsmtp will create a correct email address (mailbox only).
939 kes Modify 'memory' command so that the buffers are listed as 'In use'
940 to avoid confusion with Orphaned buffers.
941 kes I reworked the OpenSSL include/lib flags to be handled in
942 the standard Bacula way, which should fix bug #863 concerning
943 non-standard OpenSSL libraries.
945 kes Implement Help Browser window for bat.
946 kes Fix reload bug that reset StorageId to zero.
948 kes Fix TLS #ifdefing when TLS turned off.
949 kes Ensure that when labelling a tape with Slot=0 that InChanger
951 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
953 kes Add StartTime to final uar_sel_jobid_temp query so that we can
954 add DISTINCT (required by PostgreSQL).
955 kes Implement BSOCK authenticate_director() method. Eventually will
956 authenicate all daemons.
957 kes Move several more functions into the BSOCK class.
959 kes Add code to tell the OS that we no longer need a cached
960 file that we were reading. In findlib/bfile.c. Also,
961 only cache files that we are reading. Thanks to
962 Tobias Oetiker <tobi@oetiker.ch> for the idea.
963 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
964 kes Implement script to automatically generate cats and dll .def
966 kes Update README.mingw32 to include new .def file generation.
967 kes Correct typo in UTF-8 error message as reported by:
968 jhernandez <julianhernandez@gmail.com>
969 kes Add additional sm_check() code on debug level 1.
970 kes Set default debug level to 1.
971 kes Trap SIGABRT in attempt to get traceback.
973 kes Reduce bat connect timeout from 30 to 15 seconds.
974 kes More restructuring and implementing BSOCK class in place of
976 kes Remove a few unnecessary malloc() tests in crypto code.
977 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
978 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
979 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
981 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
983 kes Fix Verify InitCatalog. The attributes were not pointing to the
984 correct saved location.
985 kes Implement message callback so that GUI is sure to get all
986 daemon messages. Currently displayed in a dialog in bat.
987 kes Ignore SIGUSR2 (Bacula timer) in bat.
988 kes Apply regress patch from bug #859 to allow regress to work
989 with Solaris compiler.
991 kes Begin adding TLS support to bat.
992 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
993 clean up lex.c and make it more readable.
995 kes Move more bnet functions into the BSOCK class.
996 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
997 kes Complete change of berrno strerror() method to bstrerror()
1001 kes Cleanup incorrect email addresses in bsmtp.
1002 kes Make bat display initial messages rather than discard them.
1004 kes First cut of adding .mod to the run command.
1005 kes Implement auto display of messages in bat.
1006 kes Enhanced preferences to allow all Bacula output to be
1009 kes Try to make bsmtp date routines more generic.
1010 kes Fixed bug #856 autochanger documentation.
1011 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1012 kes Add new cats entry point so Win32 builds.
1014 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1016 kes Do better checking for the MySQL 64 bit libraries looking for both
1017 .a and .so libraries.
1018 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1019 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1020 kes Require the thread safe version of MySQL during configure. Thanks
1021 to Andre Noll for pointing this out.
1022 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1023 continuing in migration code.
1024 kes Apply implementation of tray-monitor font derived from gnome-console
1025 submitted by Andreas Piesk <a.piesk@gmx.net>
1027 kes Eliminate important memory loss in SQLite
1028 kes Fixed the batch insert MySQL thread specific data that was not
1029 being freed. See cats/mysql.c:db_thread_cleanup().
1030 kes Fix restore before command.
1031 kes Convert old hdr.name to name() in a few places.
1032 kes Implement update jobid command.
1033 kes Return all time_t dates in db_get_job_record()
1034 kes Stop watchdog in SD earlier.
1035 kes Put Pool just after Storage in please mount message.
1036 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1039 kes Update the po files.
1040 kes Fix Verify InitCatalog by making it cache attributes.
1042 kes Change name bacula-bat to bat for man 1 page to correspond to
1044 kes Check for client and store NULL pointers in status command. This
1046 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1047 kes Fix sign extended editing of %p.
1048 kes Clean out a little old #ifdefing in cats/mysql.c
1050 kes If time diff between DIR and FD is more than 600 seconds convert
1051 INFO message to WARNING.
1052 kes Implement heap size display in status for all daemons.
1053 kes Attempt to fix MySQL db open memory loss (not successfull).
1054 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1055 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1056 Query. This looks like a MySQL but but by doing extra releases,
1057 the memory goes away. This should fix bug #847.
1059 kes When backup fails, cancel SD before waiting for sd termination.
1060 kes If SD is waiting for FD to connect during cancel, wake up the
1062 kes Fix fsf code so that errno is correctly reported.
1063 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1065 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1066 so that Bacula doesn't later stumble into a seg fault.
1067 kes Use the term Restore Client in the restore Job report.
1068 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1069 the original job's FileSetId.
1070 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1071 spooling in migration jobs. Not yet tested.
1072 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1073 reading conf file from a pipe. However, do it with open_bpipe()
1074 rather than popen. Not yet tested.
1076 kes Fix an ugly bug where the VolCatBytes were getting updated
1078 kes Implement bconsole memory command that prints current memory
1079 usage, plus smartalloc dump.
1080 kes Clarify some error messages in backup, admin, and migrate.
1081 kes Shrink label dialog to smaller size.
1082 kes Invert Cancel OK buttons on restore to be OK Cancel.
1083 kes More strerror() to bstrerror() conversions.
1085 kes Start implementing bstrerror() in place of strerror().
1086 kes Stripping path -- seems to work.
1088 kes Prevent door and port files from being restored (mostly
1090 kes Free an unreleased buffer in compat code.
1091 kes Change console Job name from *Console* to -Console- to eliminate
1092 Win32 filename problems. Put Win32 path separator when creating
1093 Console file. This fixes bug #846.
1094 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1096 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1098 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1099 to force Win32 error message.
1101 kes First cut strip path. The data should be passed to the FD,
1102 but nothing is done with it yet.
1103 kes Enhance the digest and signature routines in the crypto
1104 library to accept a JCR and to use it to print error messages
1105 so that they will go in the Job report rather than the daemon's
1107 kes Simplify some of the verify signature code.
1108 kes Simplify a few of the alternative returns in the signature
1111 ebl Use only POSIX regex instead of GNU regex in breg.c for
1112 File relocation. It fix broken freebsd compilation.
1113 kes Convert all other Dir files to use new ua class message
1115 kes Tentative fix for missing digest signature in bug 807.
1116 kes Correct handle problem in new win32_ftruncate routine.
1117 kes Convert ua_purge.c and ua_update.c to use new ua class
1118 message routines for bat.
1120 kes Correct incorrect installation of LICENSE in Win32 installer.
1121 kes Display LICENSE at the beginning of the Win32 install.
1122 kes Attempt to correct the need for the png files to be installed
1124 kes Reapply my bat.conf install script in qt-console. I think I
1125 editted bat.pro instead of bat.pro.in and it was lost.
1126 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1127 the /var/lock/subsys for subsysdir. Also corrects typos in the
1130 kes First cut update job.
1131 kes Correct configure to include qmake of src/qt-console directory.
1133 kes Make restore job yes/mod/no print in one command so GUI works.
1134 kes First cut implementing backup and restore client.
1135 kes Correct editing in Verify output that caused a seg fault.
1137 kes Insure that bat.conf is not overwritten during installation.
1138 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1139 while I was implementing migration in March 2006 !
1141 ebl Cleanup file relocation, using char *RegexWhere instead of
1142 char *where + bool where_use_regexp
1143 kes Update some manpages and add bat manpage.
1144 kes Make a first cut at converting bacula.spec.in for bwx-console
1146 kes Apply patch from John Goerzen to add hostname as fourth argument
1147 to make_catalog_backup script.
1148 kes Fix typos I introduced into bsmtp.c
1149 kes Make pm_strxxx() routines handle input of NULL pointer. This
1150 is to protect from NULL pointers returned from SQL databases.
1151 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1152 kes Add more debug to FIFO code -- fix fifo regression test.
1154 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1155 kes Add thread timer to bnet_connect() to break from OS if wait time
1158 kes Update Win32 build to include new files, new symbols, and
1160 kes Implement socket level heartbeat (tcp_keepidle)
1161 ebl Commit File relocation patch
1162 kes Make bat have 'make install' target.
1163 kes Warn during install if old gnome-console binary found.
1164 kes Warn during install if old wx-console binary found.
1165 kes Add -8 option to bsmtp command line to add content type utf-8.
1166 Fixes bug #809. (Character coding problem in bsmtp).
1167 kes If < is found in target (from, to, cc) then do not enclose the
1168 target in < > in bsmtp. Fixes bug #772 (malformed address).
1169 kes When printing certain items in dbcheck, stop after 300000.
1170 Fixes bug #822. (dbcheck loops).
1171 kes Incorrect status in Dir after waiting for mount with poll set.
1174 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1176 kes Print waiting to reserve a device every 5 mins.
1178 kes Don't call close_part in label.c if tape and relabel.
1179 kes Don't free volume if busy in close() -- should help with
1181 ebl Fix #824 RunScript bug (After script could be execute twice)
1182 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1183 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1184 Add a regression script to test RunScript
1186 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1189 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1190 deprecated. No additional bugs will be fixed, and they will be dropped
1191 in a future release (probably 2.4.0).
1192 kes Change name of wx-console to bwx-console to make it more Bacula
1194 kes Change the name of gnome-console to bgnome-console to make it
1197 kes Some time in March, a Feature Request with patch from Jorj Bauer
1198 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1200 The ability for the director to validate a Client (FD) CN against
1201 an arbitrary set of patterns rather than the hostname, with
1202 A new 'TLS Allowed CN' set of directives which are implemented
1203 in the Client resource. Then pattern matching is used in place
1204 of hostname matching against the Certificate's CN. As an example, we
1205 have certificates which (a) use a local CA, and (b) have a CN of the
1207 kes Add new/changed entry points to Win32 build
1208 kes Create unaccepted-projects for projects that are not accepted.
1209 kes Simplify locking in the reservations system.
1210 kes Add more debug code in reservations.
1211 kes Make sure error condition on reserving a volume is handled correctly.
1212 kes Correct handling of volume_in_use.
1213 kes Correct handling of initializing a device.
1214 kes Move handling of broadcasting releasing a device into release_device().
1215 kes Correct attaching dcr to dev so that it is only done if device
1216 is properly initiated.
1218 kes Locking debug level tweaks in SD.
1219 kes Tweak new Volume code.
1221 kes Add exec external-command [wait-seconds] to bconsole. This
1222 executes the external-command. Note! normally external-command
1223 should be enclosed in double quotes.
1224 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1225 it should normally be off in a production system.
1227 kes Implement die command for SD so that we can force it to dump.
1228 kes Implement SD lock debug code.
1229 kes Implement new algorithm for keeping Volume list in SD. It
1230 is now owned by the device.
1232 kes Implement new code for freeing in use volumes that should
1233 resolve if not all, some of the problems of multiple drive
1234 tape conflicts described in bug 801.
1236 kes Fix gui/bacula-web/images files in svn.
1237 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1239 ebl Fix a bug in batch mode (in string escape)
1240 kes Correct migration prune SQL typo that crept in in a
1241 recent 2.1.x change.
1243 kes Move bnet_despool() into class in bsock.c
1244 kes Modify job report to include director name and Build OS.
1245 kes Move drop root privilege and check_catalog() before fork.
1246 kes Add update database scripts (version 9 to 10) to updatedb directory.
1248 ebl Check size and age of each file after its backup to see if
1249 it has changed during backup, if 'checkfilechanges' is set.
1250 The FD will do an extra check (stat(2)) after
1251 each file backup. mtime, ctime and size are compared with
1252 'before backup' information. If time or size mismatch, an
1253 error message will be generated. You must upgrade FD to use it.
1255 kes Make database name and user configurable
1256 --with-db-name=xxx --with-db-user=xxx
1257 kes Add back database type to message.c for debugging.
1259 kes Implement dir_sql() which issues an SQL query.
1260 kes Modify bat medialist to use dir_sql() and do some minor C++
1261 formatting as well as eliminating a number of pointers, simplifing
1264 kes Fix some of the mtx-changer grep commands for tape label readers.
1265 kes Convert a number of bsendmsg into the appropriate send/warning/error
1266 message class calls.
1267 kes Suppress the using database message in the .sql command.
1268 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1270 kes Add context menu for floating a window.
1271 kes Some minor cleanup and name changes in qt-console
1272 kes Add doing mt setblk 0 in Win32 mtx-changer.
1273 kes Apply Martin's bug fix to move definition of ENODATA for
1275 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1276 sqlite2 and sqlite3.
1278 kes More pruning cleanup.
1279 kes Turn on wait_for_drive by default in mtx-changer.
1280 kes Turn on Batch insert code by default as it now passes regression.
1281 kes Add ./configure --enable-bat to enable building of Bat.
1282 No install yet though.
1284 kes Implement a new .sql command for bat.
1285 kes Implement code to turn off pruning in obtaining the next volume.
1286 Pruning is turned off for the status dir command, but turned on
1287 for SD requests and for the list nextvolume command.
1289 kes Correct Qmsg() that was not updated correctly when committing a
1290 previous change (probably the recent TLS patch).
1292 kes Write new subroutine is_volume_purged() that explicitly checks
1293 if the Volume is purged, and if so marks it as such. This should
1294 resolve problems reported about needing to mount twice to recycle
1296 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1297 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1298 amount of duplicated code.
1299 kes Do volume pruning only for the Media Type desired (reduces pruning time
1300 if multiple Media Types are in the same pool).
1301 kes Implement more detailed info in the Job report for the Bacula version
1303 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1305 ebl Add bbatch tool to bench database and insert mode.
1306 Fix sql quote stuff in batch mode
1307 Fix sql stuff for mysql
1309 kes Correct problems with am/pm scheduling. Fixes bug #808.
1310 kes Implement new prunning code that prunes up to 1000 jobs at
1311 the same time. The same technique can be applied to a number
1312 of other prune/purge subroutines.
1313 kes Add an insanity check when starting a new tape job to ensure
1314 that the tape position has not been changed. If so fail the
1316 kes Fix Win32 build for dlls to add the folllowing:
1317 src/lib/bsock.c -- new file with new entry points
1318 src/lib/dlist.c -- new entry points
1319 src/cats/sql_create.c -- new entry point
1320 src/cats/sql_cmds.c -- new DATA item exported
1322 ebl batch mode cleanup bscan-test is ok now.
1323 kes Implement SD code to check length of disk volume before appending.
1325 kes Correct return status on db_batch... routines.
1326 kes Add call to db_write_batch_file_records() to migration code.
1327 ebl Fix AfterJob timing
1328 kes Move the checking of the database in initializion of the Director
1329 to after we drop privileges. This avoids the need for both root
1330 and bacula access to the DB.
1331 kes Correct a misplaced variable definition in src/filed/backup.c
1332 kes Correct how the new batch insert db_create_attributes_record()
1333 uses the arguments. Caused a seg fault in bscan.
1334 kes Implement lock() and unlock() methods in DEVICE class.
1335 Implement block() and set_block(xx) methods in DEVICE class.
1336 kes Modify bnet_connect() so that it uses time() to check for the
1337 wait time expiring (on some OSes, some system calls may not
1338 return immediately).
1339 kes Modify Verify to obtain the previous JobId when it is actually
1340 running rather than at schedule time (as it was in 1.38.x).
1341 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1343 kes When checking pid in pid file, continue running if the pid is
1344 the same as ours. This occurs on IRIX after a system crash.
1347 kes Extend new GUI API.
1348 kes Make the ua structure a class, and implement send_msg(),
1349 error_msg(), warning_msg(), and info_msg().
1351 kes Apply fix from for building wx-console on the Mac from
1353 kes Implement new select mechanism for GUI programs.
1354 kes Reorganize initialization of stackedWidgets in bat.
1356 kes Add updated nagios plugin supplied by Christian Masopust.
1358 kes More bat implementation.
1359 kes File migrate bug with Pool Occupancy using mediaid instead
1360 of jobids. Fixes bug #795.
1361 kes Fix orphaned buffers in filed backup and verify due to
1362 crypto buffers not freed during errors. Fixes bug #789.
1363 kes Extend new GUI api code to tree commands.
1364 kes Ensure that tree and dot commands check console ACLs.
1365 kes Permit marking directory with trailing slash.
1366 kes Allow 20 console connections (instead of only 10).
1368 kes Add smartctl call to bacula-sd.conf as an example of getting
1371 kes Modify jobq.c to let simultaneous restore jobs run. This may
1372 cause them to fail if they cannot get a drive.
1373 kes Add Client Connect Wait to Storage daemon to permit users to
1374 modify the time the SD waits for a FD connection.
1376 kes Correct virtual changer check which was backwards. This caused
1377 volumes to be unloaded into slots already occupied.
1379 kes Apply Command ACL filter to JobId list in restore command.
1380 kes Correct typeo in var.c patch.
1382 kes Don't let Bacula prune File or Job records for the current Job.
1383 kes Fix variable substitution pad + inc bug reported (with patch)
1386 kes Correct SQLite log table index as reported by Luca Berra.
1388 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1390 kes Begin implementing new comm signals for API.
1391 kes Fix a few places in lib/message.c where the open fd may
1393 kes Continue implementing lib/bsock.c (real class). Make jcr,
1394 who, host, and port private. There are new methods to access
1395 them for non-class use. This required touching a number of files.
1397 kes Add LANG=C to autoconf/randpass so it works with languages other
1398 than English. Fixes bug #788.
1400 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1402 You will not be able to generate Include/Exclude list any more.
1403 It will be fixed soon.
1404 If you want to use this, you can apply
1405 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1407 kes Restore of sockets created false error messages because Bacula
1408 no longer restores sockets, but the code was still trying to
1409 set the attributes on a non-existent file. Reported by a user.
1410 ebl finish RecyclePool feature
1411 Media will takes Pool.RecyclePool
1412 when moving from Scratch to a Pool or when user will do
1413 update volume=xxx frompool
1414 To use it, add RecyclePool = aPool to your Pool resource
1417 RecyclePool = Scratch
1421 kes Expand new BSOCK class adding signal() and new BNET signals.
1422 kes Begin enhancing the dot commands adding a new API function
1423 that returns more information and will make it easier
1424 to interface to the Director from a program.
1426 kes Make DEVICE fd private. Its new name is m_fd, and can be
1427 obtained with dev->fd() outside the class. This is the
1428 first of many DEVICE members to be made private.
1429 kes Implement Michael Renner's idea on having a virtual disk
1430 changer. I made some minor modifications (e.g. I did not
1431 implement the Virtual Changer directive, but simply set
1432 the Changer Command to an empty string.
1434 kes Implement a BSOCK send() method that writes the whole record
1435 in a single write() request rather than in two.
1436 ebl add update volume=xxx recyclepool=yyyy
1437 volume takes recyclepool from pool when using update volume=xxx from pool
1439 kes Fix encryption deblocking bug, which caused some restored files
1440 to be truncated. This fixes bug #763.
1441 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1442 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1444 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1445 ebl Use btime_t instead of uint64_t in media patch.
1447 kes Optimize the use of the database a bit in the Status dir command.
1448 Only open it when needed, ensure that if any previous database
1449 was opened, it is closed.
1451 kes Correct VolCatBytes bug from media patch.
1452 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1453 in the case of orphaned records.
1454 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1455 and File records in 300K chunks to be more efficient. This
1456 idea came from Juan Luis Frances (if I remember right).
1457 kes Apply Eric's scratch patch that moves a purged Volume to
1458 the RecyclePool. Question: how is RecyclePool set? what
1459 happens to the ScratchPool?
1460 kes Apply Eric's media patch that collects read/write media
1461 times as well as byte counts. This patch requires a
1462 simultaneous upgrade of the DIR and SD. Note, there
1463 should be some way to turn off timing. I'm not sure
1464 times are in Bacula units.
1465 kes Apply Eric's batch-insert patch.
1467 kes Update projects list.
1469 kes Implement Include/Exclude file lists in FD as dlists using
1470 the new dlistString class. This permits efficiently having
1471 large include/exclude lists and completes project Item 25.
1472 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1473 console is authorized to cancel the job. This fixes bug
1475 kes Modify SD so that the VolCatJobs medium record is updated
1476 at the beginning of a Job rather than the end. This
1477 fixes bug #775 where exceeding MaxVolJobs caused jobs
1479 kes Added a mutex around getting and setting Volume information
1480 so that multiple simultaneous jobs will single thread.
1482 Switch to using Subversion
1483 kes Remove src/pygtk-console/ from configure
1485 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1486 plus the entrypoints.
1487 kes Apply patch supplied that corrects debug print
1488 in canceling jobs for max run time. Supplied as
1489 part of bug #621, which was previously fixed.
1491 kes Test on job_canceled() and sd_msg_thread_done inside
1492 loop starting the message thread to avoid a race condition.
1494 kes Remove rl_catch_signal from console.c as it conflicted
1495 with the header definition. Fixes bug #765.
1496 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1498 kes Clarify some stored/acquire messages to indicate if the
1499 problem is with read or append.
1501 kes Fix memory leak with storage ids in cats/sql_get.c
1502 kes Terminate watchdog earlier to avoid reference to released
1503 memory -- reported by Jason Austin.
1504 kes Move closing the database from jobq.c to the director daemon
1505 termination routine. This fixes memory leaks for shadow jobs
1506 (i.e. migration jobs).
1507 kes Free up the unique jobid chain items in migrate.c. This fixes
1508 a memory leak problem.
1509 kes Convert some ugly looking for statements to use foreach_alist
1510 in findlib/find.c. This will facilitate converting the structures
1511 to use dlist (for large include/exclude lists).
1512 kes Fix a bug in the btree.c and btree.h routines, then rename them
1513 rblist and add them to be built in src/lib. Include some new
1514 methods written by Rudolf Cejka that make the code more readable
1515 (hides some of the ugly casting).
1516 kes Add set_next() and set_prev() methods which make the code much more
1517 readable. Also add a new dlistString class that facilitates storing
1518 strings in dlists. To be used in the large include/exclude lists.
1519 kes Make some trivial modifications to lib/tree.h that use rblist
1520 rather than dlist for storing the tree links. This was suggested
1521 by Rudolf Cejka. The result of this is that the restore tree now
1522 uses red-black binary trees rather than simple linked lists. This
1523 should give rather dramatic speed improvements for directories
1524 contining large numbers of directories/files (more than 10000).
1526 kes Fix maxruntime bug #621.
1528 ebl Implement the include JobID in spool file name project.
1529 kes Reorder projects file in order determined by Jan 2007 vote.
1530 kes Implement item #12 on project list -- quick release of FD by
1532 kes Fix open of SQLite3 db where user does not have write permission
1533 so that DIR does not crash. Fixes bug #761.
1535 kes Add back missing @ in Win32 Makefile.
1536 kes Change 'Device not configured to autolabel' from INFO
1538 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1539 which should restart an indefinite # of times.
1540 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1541 other DIR specifications.
1543 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1544 Fix path quoting in SQLite scripts.
1545 Fix problems with SHGetFolderPath.
1547 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1549 kes Fix Job restart on error bug that promotes an Inc to a Full
1550 backup. This should fix bug #755.
1551 kes Add qt-console and first cut of code.
1555 kes Fix Bacula->Documentation link on Win32 to point to index.html
1556 instead of bacula.html. Fixed bug #750.
1557 kes Return JobId in db_get_job_record() when JobId==0. This should
1559 kes Do not release source pointers when restarting a failed job.
1561 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1562 This *should* fix bug #747.
1563 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1566 kes Modify USTORE constructor to set an empty store_source string,
1567 and don't copy the store_source string in a cancel. Hopefully
1568 this will fix Arno's seg fault, bug #744.
1569 kes Add back code to disable conio in configure. Fixes bug #743.
1570 kes Correct the Options scanner in the FD to correctly handle
1571 SHA1 option, which was eating the next option. Reported by
1573 kes Add code to indicate when the SD is spooling, spool wait, and
1574 despooling as requested by Alan Brown.
1576 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob