1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Make sure we unload the right slot when swapping.
30 kes Add debug times, reduce size of two-pool-changer test
32 ebl Tweak autoconf scripts for faketape
34 kes Improve SD reserve debug code.
35 kes Testing an improvement to free up volumes no longer in use.
37 kes Rework SD acquire for read to handle autochanger Volume
39 kes Implement regression that explicitly tests swapping a Volume
40 from one drive to another.
41 kes Enhance disk-changer to detect most error conditions.
42 kes Fix SD code so that it properly swaps a Volume between drives.
45 kes Apply libdbi patch from Joao Freitas for regress and for
46 Bacula trunk. Regress now works with libdbi. Nice.
47 kes Apply .nobackup patch from bug #1077 submitted by
49 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
50 name into jobs cloned via the run directive.
52 kes Prevent a Volume that is being swapped from being freed from
53 the volume list. This will most likely fix, at least partially,
55 kes Fix strippath so that it does not get a buffer overrun and crash FD.
57 kes Remove 50 millisec wait in SD that broke debugger.
58 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
59 that a job may run, counted from when the job was scheduled.
60 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
61 a job may block waiting for a resource, counted from when the job starts
62 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
63 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
64 that implements multiple commands per line in the console when using
65 readline. Modify the default to use a semicolon as the command separator.
67 ebl Fix SQL query in migration code.
68 ebl Make accurate mode with hash disk pass regression tests
70 ebl Implement first cut of accurate backup with hash disk.
72 kes Force unload of volume when wrong volume mounted in SD.
74 kes Fix bat seg fault at termination.
75 kes Add Bacula generated version to bat about box.
78 kes Experiment with allowing multiple read jobs.
79 kes Move final volume swapping code to DCR method and
80 call it from acquire_for_read().
81 kes When wrong volume is mounted during read, unload_autochanger.
83 kes Integrate the libdbi changes from Joao Henrique Freitas
85 kes Stop searching for Volumes in SD askdir if DIR returns the
86 same volume name twice in a row.
87 kes Close bat console windows first to eliminate error message
90 kes Tweak the swap Volume from one drive to another code so that
92 kes Resolve several problems with recycling that broke the new
93 code (these problems are in 2.2.9 as well).
94 kes Remove the volume lock when calling the sysop code.
95 kes Don't mark a reserved volume with no writers as unused otherwise
98 kes Rework class structures for VOLRES, DCR, and DEVICE to make
99 the method names a bit more logical, and for more logically
100 handling the responsibilities.
102 kes Remove redundant code in terminating the scheduler that just
103 causes a seg fault in many cases.
104 kes Cleanup releasing a volume and make it a DCR method.
105 kes Improve algorithm for detecting pre-reserved volume and
108 kes Tweak volume swapping code so it works.
109 kes Correct name overloading in mount.c
110 kes Replace released flag in VOLRES with reserved and add access
111 methods for the VOLRES class.
112 kes Prevent volume from being released while being swapped.
113 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
115 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
117 kes Refactor parts of stored/mount.c
119 ebl Add sanity checks for VolWriteTime and VolReadTime
120 ebl Take care of bad clock changes while computing VolWriteTime
121 and VolReadTime. This should fix or limit #1066
122 kes Correct error string numbers in dird/catreq.c
123 kes Restructure reserving, acquiring, and mounting volumes. Calls to
124 autochanger are deferred for mount.c -- simplifes the code.
126 kes Do not prune any running job. It just fails the job.
127 kes Lock the volumes when changing dev->reserved_device and marking
128 the volume unused otherwise the device can get reserved by
129 another job before the volume is released, thus blocking it.
131 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
132 kes Fix bug #1063, reuse of freed ptr in list nextvol.
133 kes Release regex compile buffer in filed/job.c
134 kes Add proper type of const char in sql_create.c
135 kes Turn off debug in daemon termination routines
136 kes Move free_volume_list() before devices are freed in stored.c
137 kes Fix reference to uninitalized stack variables in bregex.c.
138 This should correct bug #1067.
140 kes Fix possible seg fault in SD when freeing a volume entry.
142 kes Implement unload_dev() before swap device.
143 ebl Add statistics prunning with option and menu
144 kes Separate unload_dev() from unload_other_device() in autochanger.c
146 kes Apply patch from bug #1069 that corrects spurious error messages
147 when ACLs enabled on SGI but no ACL exists.
148 ebl Fix small segfault in bacula-sd when debug level is 500
149 kes Modify run_program() and run_program_full_output() to use
150 call by reference for the results string. This corrects a long
151 standing problem where the address of the string may be changed
152 in the subroutine but not in the calling program.
154 kes Re-enable code to remember last volume mounted on a non-tape
156 kes Add patch supplied in bug #1068 that fixes a SD crash when using
157 a Virtual autochanger.
158 kes Generate correct JobMedia records during spooling/despooling when
159 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
160 <tih@hamartun.priv.no> for excellent analysis and testing.
162 kes Tweak hash algorithm for htable using Martin Simmons idea
163 for doing a circular shift.
164 kes Remember what volume is in VTLs (previously turned off for
166 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
167 pointed out some problems in creating JobMedia records during
168 spooling with concurrent jobs. Fix the problem by updating the
169 start file position before despooling and generate a jobmedia
170 record at the end of despooling.
172 kes Fix handling of JobMedia records during spooling and when a
173 Volume is changed without actually writing data to the Volume.
175 kes Rework certain SD locking based on gdb tracebacks of deadlocks
176 sent by Eric. This code now uses only the volume_lock() rather
177 than the reservations lock when at EOM and acquiring a new
179 kes Ensure only one exit point in several subroutines.
181 kes Implement bsock code to permit locking. Use the new code in Verify
182 in the FD to prevent the heartbeat thread from disrupting the Verify
183 data sent to the Dir.
184 kes Modify SD locking to eliminate locking the reservations system from
185 outside the system. Use the volume lock when getting media data
186 and reserving a new volume at end of media.
187 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
188 when SD starts are not locked into place.
190 kes Fix error compiling runscript code on 64 bit machines.
191 kes Tweak Win32 mount point code.
192 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
193 cleared giving bad file estimate).
194 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
197 kes Keep Schedule run lists in order as suggested by
200 kes Implement autostart scripts for Debian.
201 ebl Implement upgrade catalog scripts.
203 ebl Apply jobstat patch for long term statistics. Have to implement
204 purge stats command and upgrade scripts.
205 kes Fix mtx-changer.in for broken Debian mt program.
207 kes Fix large number of JobMedia records reported by Eric Bollengier.
209 kes Apply doc fix from bug #1062.
210 kes Resolve crash and improper restore wx-console Win32 restore
211 GUI. Fixes bug #1065.
212 kes Update Win32 wxWidgets to latest version.
213 kes Attempt to do correct handling of Win32 mount points. Should
215 kes Fix Win32 FD backup/restore memory leak due to improper termination
216 of BackupRead/Write. This fixes bug# 1038.
218 ebl Reduce memory usage for accurate backup, working only with ctime
219 and mtime. (not all Lstat field)
220 About 40MB for my linux system (400.000 files)
222 kes Add dcr->reserved_volume flag that allows us to release a volume
223 even if it is not vol->released. This allows maxvol2 to work when
224 Volumes expire and we are already writing to the device (i.e. a
225 volume is pulled out from under us by another job terminating after
226 we reserve the drive).
228 ebl Permit multiple command/console per runscript definition.
229 RunScript { command = /bin/true ; command = /bin/false ... }
230 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
231 (restart an application) just after the VSS snapshot on windows.
232 kes Don't zap dcr values during release_volume() as they might
233 have the next Volume to be mounted.
234 kes Fix AIX prototype.
236 kes Second cut of drive switching during backup.
239 kes Update Win32 version of wxWidgets to most recent version.
240 kes Tweak Copy job details.
241 kes Rework dir_find_next_appendable_volume to make a bit more effort
242 to find a suitable volume before giving up.
244 kes Make ask_sysop_to_create... to return if waken from wait.
245 This helps get out of blocked conditions.
246 kes Experimental implementation of switch_device in reservations.
247 kes Implement FD version to allow easier protocol changes.
248 kes Add Plugin Options string -- not yet passed to FD.
249 kes Implement PluginOptions ACL.
251 kes Attempt to correct problems with restores with autochangers and
252 use counts going negative
253 kes Rework SD status command and implement API for bat. Implements
254 header, runing waitreservation, devices, volumes, spooling,
255 and terminated status keywords.
256 .status storage=xxx <keyword>
257 kes Clarify TLS error message by adding double quotes around name.
258 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
259 kes Pass jcr to tls routines so debug messages can be handled better.
260 kes Rework jobq resource allocation code, and possibly fix a bug
261 that caused reference counts to get out of sync.
263 kes Rename fd/dir plugin to use Bacula standard underscore.
264 kes Plugin work -- bring dir up to fd level.
265 kes Start implementation of VTL code
266 kes Fix Win32 build after adding new cats subroutine.
268 kes First cut at Duplicate Job implementation.
270 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
271 kes Start PluginOptions string, and refactor a bit of ua_run.c
272 ebl Apply Allan patch that permit to reset recyclepool.
274 kes Test patch -- possible fix or improvement for bug #1053
275 kes Refactor FD and SD status commands to permit new API code in
276 SD, and to fix Win32 build.
277 kes Win32 build is now working.
279 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
280 some ideas in patch from Scott Bailey.
281 kes Begin implementation of duplicate Job control.
282 kes Fix some of Win32 build after recent additions.
283 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
284 which causes the FD to detect whether or not the OS has the
285 honor no dump bit (*BSD systems), and if so, to skip backing up
286 any file with this bit set. The feature is enabled by setting
287 'honor no dump flag = yes' in the Options section of a FileSet.
289 kes Correct po warning message with datarootdir
290 kes Implement more code in dird.c to put configuration parsing in
291 a class rather than use globals.
292 kes Restructure SD status command for implementation of bat API
295 kes Suppress incorrect 'Will not descend from x into y' messages.
296 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
297 daemon globals used by parser.
298 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
300 kes Fix free of plugin_list when none exists.
302 ebl Apply accurate project patch.
304 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
305 on non-mempool object)
306 kes First cut of converting FD .status to work with bat API.
308 .status client=XXX header
309 .status client=XXX running
310 .status client=XXX terminated
311 kes Implement first cut of Copy Job.
312 kes Implement Catalog in Pool resource. It overrides catalog specified
313 in the Client resource.
315 kes Apply patch (with some difficulties) from Joao Henrique Freitas
316 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
318 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
319 ftruncate() actually works. In the case of some (cheap) NAS devices,
320 it does not, and so recycling NAS Volumes does not work. The code
321 simply unlink()s the file, then recreates it. This fixes bug #1011.
323 kes First incomplete cut of big malloc blocks for htable.
324 kes Tweak plugin code.
326 kes Plugin debug code + tweak a couple bat dialog layouts
328 kes Fix creating first JobMedia record during Migration to include
329 proper index. This caused slow restores of migrated jobs.
330 kes Temp fix to plugin name file_index.
331 kes Bacula backed up and restored a MySQL database.
333 kes Implement plugin restore.
334 kes Implement parsing of db_driver to give db_type index.
336 kes First cut of plugin restore code.
337 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
338 and do not strip paths on symbolic links.
339 kes Set catalog backup database and user name from values specified on
340 the ./configure line.
341 ebl Fix #1031 about wrong pool source information in job report.
344 kes Remove a redundant jcr argument to find_files, match_files, and
346 kes Implement '.status dir header|scheduled|running|terminated' that
347 prints the requested status section. With the exception of the
348 header, the other reports have fields separated by tabs (\t).
350 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
351 a resource embedded run command to find a since time if no explicit
352 since time was supplied on the command line.
353 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
354 that updates the state file at job termination time in addition to
355 when the daemon terminates.
357 kes First version where a plugin did a backup.
358 bpipe-fd.so created a backup file, wrote a test
359 string to it, and Bacua could restore this fabricated file.
361 kes Implement DB Driver = string for the DBI driver.
362 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
363 kes First cut of code for loading Win32 plugin dlls. Implement
364 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
365 and implement a dlfcn.h file based on opengroup's definitions of
368 kes First cut plugin directives.
370 kes Apply patch from bug #1049 to prevent stripping the path on a
372 kes Attempt to fix bug #1047 where stripping a path corrupts the
373 heap. Waiting for feedback.
374 kes Correct the Mount message not to suggest labeling a new tape
375 when doing a restore. Submitted by email by John Stoffel.
376 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
377 FD by using casting. Reported in bug #1042.
379 kes A bit of crypto cleanup. More later.
381 Release Version 2.2.8
383 kes Apply patch from Martin to correct bug #1040, bscan sets existing
385 kes Fixed important spelling error in doc -- bug #1045.
387 ebl Fix bextract to be able to extract non-portable Win32 data to
389 kes Move initialization of read/write res lock earlier in the code.
390 This fixes the crash with a null conf file. This fixes bug
392 kes Redefine CURES in lib/parse_conf to be URES and move it all
393 into lib/parse_conf.c -- this responds to bug #1042, but does
394 not fix it. The fix is not to compile with FORTIFY_SOURCE.
395 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
396 the trunk SVN. I don't think this was reported as a bug.
398 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
400 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
402 kes Add DataDespooling and DataCommitting status (committing is
403 the last despooling).
404 kes Finish implementation of new reservations code noted below.
406 kes Fix bsnprintf for float point numbers. I broke recently when
407 parameterizing some variables. This fixes bug #1036.
408 kes Undo recent reservations changes ... will apply them later
409 when they work better.
411 ebl Fixes #1034 which cause mysql to hang the connection after 8h
412 ebl Change default statistics target of filename.name and path.path
413 fields for PostgreSQL. This speeds lookup by indexes. Thanks
415 kes A few more tweaks to new reservation code. Make sure to clear
416 vol released flag when retaking volume. When reading label and
417 label is bad mark volume unused. When recycling, mark volume
418 unused so it can be renamed.
420 kes Fix reserve_volume() so it doesn't release a volume in use
421 (i.e. a volume entry not marked released). This should be
422 the last part needed to fix bug #1018.
424 kes Move Heartbeat documentation from Job to Director resource.
425 This fixes bug #1033.
427 kes Fix existing switch drive SD code to call autochanger to release
428 any old volume. This must be done to keep the autochanger from
429 releasing subsequently newly reserved volumes in doing a close().
430 This should fix bug #1018.
431 kes Fail if attempting to get console input in batch mode. This
432 should help fail RunScript console commands that are incomplete.
433 kes First cut implementing switch_drive() in SD (not actually called).
435 kes Implement first cut running console commands in a RunScript.
437 ebl Fixes bug #1028 where 'Selection Type' option was not usable
439 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
442 Release Version 2.2.7
444 kes Add new free_tls() entry point so that Win32 builds.
445 kes Fix compile warning in src/lib/util.c
446 kes Fix entry point for edit_job_codes() so that Win32 builds.
447 kes Fix seg fault Frank Sweetser reports in regression testing
448 on his systems. The problem was that the original author of
449 bsnprintf.c did not take into account the side effects of
450 using ++x in the argument to a #define.
451 kes Make SD protocol backward compatible with version 2.2.x.
453 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
454 because Bacula no longer restores sockets.
455 ebl Always use ignorecase fileset option on win32 FD.
457 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
458 that implements double quoting include names in conf files,
459 and also allows piping input by having the first character
460 be a vertical bar (|).
461 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
462 that implement %f in RunScripts to pass the FileSet name.
463 kes Skip leading | when lex input comes from a pipe as suggested
464 by Michael Stapelberg <michael@stapelberg.de>.
466 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
467 Nerijus Baliunas <nerijus@users.sourceforge.net>
469 kes Implement Plugin Directory and plugin events.
471 kes Implement a security enhancement: TLS authentication but no
472 encryption. Enabled by setting 'TLS Authentication = yes'.
473 Note when this is on, TLS encryption is turned OFF!
475 kes This patch corrects a problem where the maximum concurrent storage
476 jobs counter gets out of sync during restore jobs causing jobs to
477 'wait on max Storage jobs'. This patch fixes bug #1009.
479 kes This patch fixes bcopy so that it produces correct Volumes.
481 kes This patch eliminates spurious output to the console during a VerifyVolume
482 job that contains encrypted data. It fixes bug #1024.
484 kes This patch prevents the 'status dir' command from trying to use a scratch
485 volume and possibly moving it from one pool to another. This patch fixes
488 kes Add new include to postgresql.c suggested by Marc Cousins so
489 that it compiles correctly with pgre version 8.3.
491 kes Fix --archivedir addition to configure. Replace it with
492 --with-archivedir in configure.in This fixes the regression
494 kes This patch fixes bug #1012 where the job is canceled because
495 of Max Run Time exceeded when the job has not yet started.
497 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
498 one 'part' to write. Instead of each part being stored on disk,
499 written to DVD, then deleted from disk, all parts are written to disk,
500 and only the last is written and deleted from disk.
501 kes This patch fixes the status command to include the formating string for
502 JS_AttrInsterting. It fixes bug #1021.
503 kes This patch should fix the Mac OS X build problem on the latest
504 Darwin, where sys/types.h was not included correctly (apparently
505 due to a change in the Mac headers). The solution was to explicitly
506 ensure that it is defined for the ./configure.
507 This patch also has a rebuild of configure that includes the Debian
508 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
509 kes This patch should ensure that queued messages to the console are
510 displayed as soon as possible. It should fix bug 1007, but has been
511 reported not to work.
513 kes This patch fixes the infinite loop when trying to increase the
514 maximum number of volumes in a Pool during the add command.
515 This patch fixes bug #1008.
517 Release Version 2.2.6
519 db Remove extra data on estimate command in joblist for bat.
521 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
522 really change anything, but is the beginning of doing it *right*.
523 To do it completely right the LastWritten date must be passed to
524 the SD, but it is not yet done.
525 kes Minor tweaks to some bat restore SQL.
526 kes This patch fixes bug #1003 where putting the message output from
527 a Verify job into the catalog results in a recursive loop. The problem
528 seems to show up only with postgresql (to be verified).
529 kes Correct %x to %p in postgresql debug statement.
531 kes Fix bug #942 where lots of emails where generated when the heartbeat
532 interval was low and Bacula wanted a different tape from the one in
535 ebl Add new SD despooling attributes and Dir inserting attributes
536 job status codes in the catalog (Status table).
538 ebl Use qmake-qt4 instead of qmake when available (debian system).
540 kes Add a security warning to src/cats/make_catalog_backup.in indicating
541 that passing the password via the command line (arg 3) is insecure.
542 This responds to bug #990 (it doesn't fix it).
544 kes Set default debug_level to zero. This corrects bugs #991 and #993.
545 kes Fix a crash in bat when it cannot connect to the Director for example
546 if the Director is not running.
547 kes Remove redundant INDEX (JobId) from File table in the trunk.
549 kes Make explicit exception to GPL in LICENSE to permit linking
550 the Win32 FD with Microsoft VSS code.
551 kes Apply the Solaris package patch from
552 Masopust, Christian <christian.masopust@siemens.com>
553 kes Apply the patch to optionally add a timestamp in the debug output
554 submitted by Mariusz Czulada <manieq@wp.eu>.
556 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
557 backend (sql_strerror). Fixes bug #989
559 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
560 It applied with no problems.
561 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
563 kes Redirect stderror to stdin on mt status command in mtx-changer.in
564 since the status is returned on stderr on Solaris.
565 kes Activate Close button on tray-monitor window. This fixes
567 kes Check for NULL item in parse_conf.c before calling it. In the
568 case of Device, there is no item and this caused a seg fault when
569 Device appears in the conf file.
570 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
571 avoids pulling in config.h multiple times in some new code.
573 kes Fix spurious warning message printed when creating a volume with
574 a LabelFormat. This fixes bug #976.
576 Release Version 2.2.5
578 kes Add JobId in place of Job name in all the Jmsg() output.
579 kes Correct the APP_DESC for the Win32 storage service (remove an e).
581 kes Make maxvol-test and new more strict maxvol2-test work.
582 kes Print JobId in all Jmsg() job output.
584 kes Add new SD despooling attributes and Dir inserting attributes
585 job status codes. This fixes bug 961.
586 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
588 kes Fix doc issue. This fixes bug #963.
589 kes Fix listing performance problems in bat. Pointed out by
591 kes Remove old debug code.
592 kes Fix bat code that tests for Win32. This should fix bug #968
593 kes Query 5 list wrong Vol after migration. This fixes bug #960
595 ebl Fix #969 where user can't change Replace option in restore menu.
597 kes Save jcr in thread specific data (tsd) for each thread.
598 kes Make Dmsg() print JobId as -%u.
599 kes Make Jmsg, Emsg, and others automatically pickup the jobid
600 for the thread if it exists.
601 kes Remove old reservation debug jid code.
602 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
603 ebl Add an option that permit to specify spool size in job
604 definition. (Applying patches/testing/spoolsize_per_job.patch).
605 You must upgrade SD and DIR at the same time.
606 dvl Add new configuration item --archivedir
607 dvl Adjust regression tests to use tmp not /tmp. This will allow
608 multiple concurrent runs of the regression tests.
610 kes Fix race condition that drops final block written to volume.
611 This happens in rare cases with multiple simultaneous jobs
612 when the Volume fills. This fixes bug #964. May be related
613 to bug #935 and possibly #903.
614 kes Eliminate more strerror() and replace with bstrerror().
615 kes Remove BSD getopt and replace with unrestricted IBM version.
616 kes Fix Win32 build for changed calling sequences.
617 kes More tweaks to the mount volume routines to get everything
618 right. Changed variable name from find to have_vol, which is
619 much easier to understand.
620 kes Enhance btimer debug code.
622 kes Fix FD->SD authorization failure, which was due to spurious
623 wakeups from a pthread_cond_timedwait(). Simply check the
624 predicate before continuing. This fixes bug #953.
625 kes Add const char where needed (more to do). Remove temp debug code.
627 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
628 kes Don't overwrite error message in check_tables_version.
630 kes Unlock batch insert tables with same calls used elsewhere.
631 kes Allow starting 59 jobs a second.
632 kes Make SD session key more random.
633 kes Add retry for SQLite opening db if it fails. Probably helps
635 kes Suppress extra error messages during batch insert failure.
637 kes Add jcr to timer packets so if killed message can be sent to job.
638 kes Add JobId to all Dmsg() output.
639 kes Put some FD auth code on dbglvl rather than fixed.
640 kes Return insert attributes error message in db msg buffer to avoid
641 false error messages. Helps fix bug #966.
642 kes Separate batch init error messages. Probably helps fix bug #966.
643 kes Make SD code that contructs attribute insert check string lengths
645 kes If Dir gets an error during inserting attributes, cancel SD.
646 This reduces unnecessary error messages.
648 kes Correct search boolean for getting Volume info
649 ebl Cleanup batch insert code. Probably fixes bug #965.
650 kes Back out one small change to the reservation system (reserving a volume).
651 kes Rework how a Volume is mounted. It is now much more intelligent and
652 will always attempt to use any mounted volume if possible and reduces
653 calls to the Director asking about volumes.
655 kes Turn off some code when batch insert not enabled.
656 kes Edit FD name in connect error messages.
657 kes Rework the reservation system to take into account that the Director
658 might give us a Volume that is different from the current one being
659 used, and to ensure that we don't exceed Maximum Volume Jobs.
660 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
661 fatal error with multiple jobs running'
662 kes Add more debug code in reservation system.
663 kes Implement maxvol-test to check bug #947.
665 kes Add code to handle tray monitor separated from Win32 FD.
666 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
668 kes Add missed return in fixing verify bug -- trunk only.
669 ebl Fix a command parser issue causing a director segfault.
670 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
672 kes Increase the max block size to 4MB fixes bug #957.
673 kes ERABT if user sets min block size > max block size. Fixes bug #956.
674 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
675 is not properly mounted (recognized) during a poll.
676 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
677 Job that has differences reports Verify OK.
678 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
680 ebl Add an option to operate on all pools with update vol parameters.
681 This complete the project 20. Patch from Nigel Stepp.
682 ebl Add history support to bconsole when using readline.
683 Using Ctrl-D to exit doesn't update .bconsole_history
684 kes Modify new volume algorithm to use max MediaId for generating next
685 volume number rather than the count of Volumes. This should essentially
686 eliminate the failure rate if some volumes were deleted. Bug #921.
687 kes Begin implemention of Optimize Job Scheduling.
688 kes Implement restore callback that Dirk and I agreed on for bat
689 restore. This fixes bug #928. Restore of backup of zero files fails.
690 kes Fix SQL Catalog logging which broke with new db_escape_string
693 Release Version 2.2.4
695 kes Fix bacula_cats.def for new db_escape_string().
696 kes Increase size of name string when FD making connection to SD.
697 May fix bug #953. FD->SD connection failure.
699 kes Add code to help Dan debug 2drive-incremental-2disk test.
700 kes Add code to try to fix bug #908.
701 kes Add waits to multiple exit detection code to try to force pid
702 file to always be deleted.
703 kes Restore good dev.tar.gz to rescue set appropriate binary property.
705 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
706 trying to switch drives by checking for blocking before unblocking.
708 kes Cancel storage daemon in all cases where FD reports error. This
709 should fix virtually all cases of bug #920.
710 kes Fix db_escape_string() for MySQL which did not compile.
712 kes Fix error message that was clobbered when Dir tells SD it does not
713 have write permission on Volume. This should fix a minor point
714 in bug #942, but not the main problem.
715 kes Add code to cancel job in SD if FD connection fails. This should
717 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
718 dvl Pass jcr and db into db_escape_string() to enable better escaping
720 kes Fix migration code to get correct Volume name with multiple volumes
721 by skipping |. Fixes bug #936.
722 kes Implement patch supplied by Landon to fix bug #944 where using
723 TLS with bconsole uses 99+% of the CPU.
724 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
726 kes Move patches into patches directory.
728 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
731 ebl Using 'm' in bconsole will show messages like before,
732 and not memory usage.
733 kes Fix bug #935, and probably also bug #903 where files were not
734 restored. MediaId was not properly set in JobMedia record after
737 kes Suppress chown and chmod error messages if the FD is not running
740 kes Apply Martin Simmons' patch that should turn off the new API usage
741 when batch insert is turned off allowing building on older
743 kes Add ./configure search in qwt-qt4 for qwt package
745 kes Bacula is now free of 3rd party GPL copyrighted code!
747 kes Add guid_to_name.c/h which replace idcache.
748 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
750 ebl Detect if new PosgreSQL batch insert API is present.
751 kes Correct incorrect mempool call causing Director crash. Occurs on
752 systems without va_copy().
753 sb Update spec files for 2.2.1 release
755 kes Fix memory pool call in ua_output.c. bug #934.
756 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
757 Add test program to fnmatch.c
759 kes Integrate patch to README.vc8 from
760 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
761 edit it to get it into Unix patch format.
762 kes Implement mkpath.c to replace old FSF makepath.c
764 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
766 Release Version 2.2.1
768 kes Update POTFILES.in
769 kes Cleanup a few underquoted AC_DEFUNs in configure
770 kes Apply patch from Martin Simmons that adds a test for va_copy to
773 kes Fix bug #921 by increasing the number of tries to create a new volume
775 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
776 can be called multiple times. Implement a version for machines
777 without va_copy() that gets a big buffer.
779 kes Integrate more portable zone offset code into bsmtp.c
780 Submitted by Attila Fülöp.
782 kes Fix bad SD->FD return status reported by
783 (James Harper) <james.harper@bendigoit.com.au>
784 ebl Fix a bug in read_close_session which return random status
785 thanks to James Harper
787 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
788 and directory names during restore of single file/directories.
789 kes Add sanity checks to .sql command when string is empty. Hopefully
790 that will resolve Dirks Director crash.
792 kes Apply patch submitted by Martin Simmons that corrects a seg fault
793 in the bsmtp chat subroutine when debug is >= 10.
795 kes Fix Director crash when running bat SQL queries.
796 kes Add David's notes on Item 8: Copy pools.
798 kes Rework projects file to be current and ready for a vote.
799 kes Enhance lex scanner error message.
801 kes Tweak LICENSE file to mention BSD code.
802 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
803 if specified on the ./configure.
804 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
805 This class is intended to allow us to open a second bsock to the
806 Director while in the restore subdialog.
808 kes Fix configure to create bat Makefile before creating dependencies.
809 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
810 kes Add a tooltip to the tray monitor.
811 dvl Set the Director's PID file before dropping privs. This fixes
814 kes Update AUTHORs file
815 kes Increase the default max concurrent jobs to 20 in FD and SD to
816 correspond with the default .conf files.
817 kes Rewrite the Win32 service routines. This eliminates the 3 copies
818 some different, of the same file created by RN when porting the
820 kes Rearrange some of the Win32 directories and the placement of the files
822 kes Set DEVELOPER flag in version.h
824 ========================================================================
825 Release Version 2.2.0
827 kes Apply a second doc patch from Marc.
828 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
829 improves the tips section that discusses how to setup multiple
832 kes Update bat README file.
833 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
834 corrects a typo in the Recycle status check in db_find_next_volume().
835 This will probably fix a number of annoying problems with multiple
837 kes Modify most of dird/msgchan.c to use bsock class calls rather than
838 bnet calls -- no functionality change.
840 kes Modify the Verify output to specify if files are missing on
841 the Volume(s) or disk. Fixes confusion in bug #916.
842 kes When more than one Volume is read in a migration job, the last
843 Volume bytes reported are from the last read volume rather than
844 the last written volume. Fixed. This fixes bug #910.
845 kes Fix display of Recycle flag after update volume=foo recycle=yes.
846 It previously printed New Recyle flag is: no. This fixes bug
849 kes Correct seg fault when switching tape drives during restore.
850 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
851 be used until after 2.2.0 release.
853 kes Remove fnmatch() in SD that permitted wild card specifications.
856 kes Fix %g in filename returned by SQL for browse tree reported by
858 kes Fix configure so that it puts config.out in the cwd rather than
860 kes Attempt to fix the locking problem reported by Eric in bug #906.
861 kes Make berrno class to leave errno unchanged after constructor call.
862 kes Make bnet_server use the heap rather than the stack to allocate
863 its socket fd pointers to avoid a crash at termination. Problem
864 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
866 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
867 and putting it in depkgs-qt along with Qt4.3.
869 kes Rework code in acquire.c that switches drives for reading when
870 the Media Type does not match. This should fix bug #906
872 ebl Fix a director segfault during job setup #907
873 kes Correct seg fault in postgresql when first operation returns no
874 rows. Fixes Dirks File browser problem seg fault with bat.
876 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
877 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
880 kes Implement PopUp YES/NO dialog for bat.
882 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
884 kes Correct RunScript to terminate job in FD on failure.
885 kes Change abort_on_error and AbortJobOnError to fail_on_error
886 and FailJobOnError in RunScripts.
887 kes Minor tweaks of code formating in RunScripts, principally to
888 avoid depassing 80 columns.
890 kes Eliminate one #ifdef Win32 in bsmtp
891 kes Implement grow tool to grow a file for testing very large databases.
892 kes Add big-vol-test to test Bacula seeking with > 5GB.
895 kes Modify find_next_volume() to return all values in Media record.
896 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
900 kes Update Release notes
902 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
903 Warning, in previous beta version, all media get from scratch keep their
906 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
907 This should fix bug #842. Made a note to look at removing the temp
908 files at the end of the install.
909 kes Add ability to mount and unmount a file device providing it is
910 marked as being removable and has the appropriate mount and unmount
911 commands defined in the Device resource. This fixes bug #830.
912 kes When applying a storage override, release all previous storage
913 definitions rather than just prepending the new storage.
914 This should prevent a good deal of confusion.
916 kes Implement ./configure search for qwt libraries.
918 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
919 Win32 FD. This should fix bug #893.
920 kes Remove an unnecessary beep in Win32 init code.
921 kes Update copyright dates in Win32 executable about boxes.
922 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
923 code with a BSD getopt.c and getopt.h.
924 kes Remove sched.h from the Win32 compat directory -- not used.
925 kes Remove the Exit menu item from the Win32 tray monitor. If you really
926 need to shut it down, do it through the services panel or the command
928 kes Remove some inappropriate Bacula FSFE copyrights.
929 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
930 kes Fix regress config non-portable test as pointed out by
931 Florian Heigl <florian.heigl@gmail.com>
932 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
933 as pointed out by Florian Heigl <florian.heigl@gmail.com>
935 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
936 Reported by Frank Sweetser.
940 kes Fix client-only build.
941 kes Integrate client-only fixes for bsys (initgroups) and conio from
942 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
943 kes Make arguments to get_scratch_volume() in same order as other
945 kes Rework the prune_volumes() subroutine so that after purging and
946 no volume found in desired pool, it will check for a scratch
947 volume. This prevents recycling the whole scratch pool.
948 kes Add code to status storage to print boffset_t (largefile support).
950 kes Move qwt (Graphics libarary for Qt4) to depkgs.
951 kes You now need a --with-qwt=<dir> to be able to build bat.
952 kes Update src/win32/cats/bacula_cats.def to include the new
953 db_get_query_dbids() call on Win32.
955 kes Correct a problem when selecting a scratch volume and moving
956 it to another pool that lost some columns.
957 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
958 kes Enhance Autochanger error messages to include Volume and device name.
959 kes Rework prune_volumes() code to take account of InChanger flag,
960 and to handle recycling volumes going to the Scratch pool and
961 current pool because the RecyclePool directive.
962 kes Implement a better and more efficient db_get_query_dbids() to
963 handle creating and passing back a list of DBIds.
967 kes Start work on new more efficient DBId subroutine. First use
968 will be for recycling volume to Scratch inchanger.
969 kes Increase number of JobIds in pruning from 1000 to 10000.
970 This to be replaced by above routine.
971 kes Begin implementation of building Qt4 on Win32.
972 kes Correct typo in fix I added for bad TLS shutdown.
973 kes Pull 2.0.3 patches into patches directory.
974 kes Update Release notes. Include qt-console in line count.
975 kes Update Projects file.
977 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
978 bug in migration code where a job that spanned two volumes
981 kes Implement new BST_DESPOOLING blocked state. Change from locking
982 during despooling in SD to blocking. This means that other threads
983 can work with the device structure, in particular the reservations
984 system while despooling.
986 kes Fix return in reservation message queue that missed clearing
987 the jcr lock (implemented 26Jun07 below).
988 kes Rename a number of dev methods to make locking function names
990 kes Document locking in lock.c. Move lock structures to new file
993 kes Move reservations message lock to lock jcr only this
995 kes Move main SD locking code into lock.c (new file).
996 kes Update Win32 build to include lock.c
1000 kes Dirk committed the qwt library code for drawing graphs in bat.
1001 kes Tweak install of qwt so that it is integrated with ./configure.
1003 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1004 out by Eric (my typo).
1005 ebl Fix configure.in to get batch mode enable
1006 kes Return correct string from authenticate.cpp in bat when connecting
1008 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1009 spurious line drops when using TLS.
1010 kes Do not file reparse points when restoring a file that already
1013 kes Implement Windows reparse points -- similar to directories, but
1014 we do not descend into it. This is a first cut. They seem to
1015 be backed up, but restore is not yet tested.
1016 kes Remove restore_blocking in tls code when shutting a socket to leave
1017 it in blocking mode. Hopefully this will fix the encryption bug
1018 reported by Frank Sweetser.
1019 kes When opening a file for backup, tell the OS that we are going to
1020 read it sequentially -- optimization.
1021 kes Change variable names in authenticate_director() to not conflict
1022 with member names in bat. Caused great confusion with compiler,
1025 kes Queue openssl error messages in case of comm problem.
1026 kes Do shutdown() call if socket terminated.
1027 kes Remove some duplicated code in tls.c
1028 kes Move more of the bsock member variables into private and access
1030 kes Add Frank Sweetser's tls-test to the regression suite.
1032 kes Add Swedish sv.po file
1034 kes Don't print clock skew message in FD if less than 3 seconds diff.
1035 kes Add a bit of VSS info to status client.
1036 kes Implement a first cut of Vista VSS, using Win2003 code.
1038 Release: 2.1.20 beta
1040 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1041 loaded tape but uses first drive).
1042 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1043 This was indeed a Win32 issue.
1045 kes Simplify search of autochanger for in-use Volume.
1046 kes Fix exit condition of check for in-use volume. kes Remove
1047 inappropriate my_postgresql_free_result() in db_close()
1049 kes Fix bad return in FD when encryption signature not found.
1050 Probably caused a crash.
1051 kes Inhibit missing encryption signature error messages for
1052 file types where no signature computed.
1053 kes Correct inverted check on autochanger in reservation system.
1054 kes Tweak debug code in autochanger reservation.
1056 kes Add some additional locking in the cats directory in subroutines
1057 that modify packet variables called from batch insert.
1058 kes Rework how dcrs are allocated. new_dcr() can now be called
1059 with an existing pointer, and it will simply clean it up.
1060 This allows the reservation system to test various different
1061 devices, and will permit easy device changes.
1062 kes A bunch of changes all over to handle new new_dcr() calling
1064 kes Work more on the Volume management in the SD. Remember Volumes
1065 for tape drives and for autochangers (even virtual disk changers).
1066 kes When looking at the Volume list to reserve a drive, handle
1067 autochanger names correctly by interating through the changer
1068 devices. Also call the Director to see if a Volume is suitable
1069 for the current job.
1070 kes Fix some bugs in bscan. Make sure all media records are written.
1071 Make sure that valid JobMedia records are written for disk files.
1072 Previously they were completely wrong.
1073 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1074 that the URLs don't change and so that the developers will all
1075 work off the same copy. Rebuild from scrach.
1076 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1078 Release: 2.1.18 beta
1080 kes Fix seg fault in FD from incorrect digest size.
1081 kes Fix argument to non-OpenSSL crypto.c subroutine.
1083 Release: 2.1.16 beta
1085 kes Remove a few malloc()s from the encryption code.
1086 kes Use the class calls to bsock in filed/backup.c and restore.c in
1087 place of the old bnet_xxx code.
1088 kes Implement code that does an on the fly calculation of the
1089 signing digest during restore of encrypted files. It makes
1090 a best guess at the algorithm, and if it is not correct, will
1091 then revert to the old code which reads the file after it is
1093 kes Implement at least one missing crypto stream in stream_to_ascii()
1094 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1095 #877 where a reload with bad syntax causes Dir to exit.
1097 Cut: 2.1.14 beta (not released)
1099 kes Do not free a volume on a tape drive until another volume is
1100 mounted and read, or the autochanger unloads the volume.
1101 This should help the SD re-use volumes that are already mounted,
1102 and should fix bug #886.
1103 kes Apply patch from user brettedgar that allows gnome2-console include
1104 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1105 kes Apply patch from Lucien Weller that fixes day of week calculation
1106 because of DST flag problem. Fixes bug #887.
1108 kes Move find_next_appendable_volume() to after acquiring a valid device
1109 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1111 kes Unable to reproduce bug 872. However added additional testing for
1113 kes Bug #874 resolved by documenting SQLite limitations.
1114 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1115 kes Bug #881 resolved by removing typo in mtx-changer script.
1116 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1117 approval. Added a link to the wiki on the web page, and implemented
1118 a backup from http://paramount.ind.wpi.edu
1120 kes Fix update allfrompool to pass pool name.
1122 kes Convert to pure GPL v2 license.
1123 kes Fix sscanf problems reported by Peter Buschman that caused
1124 a bus error on Solaris.
1125 kes Rework (simplify) the select prompt in bat.
1126 kes Move get_jobid_from_tid() into lib and create a
1128 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1129 should definitely fix the problem of lost error messages in the
1131 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1132 kes Eliminate tcpd.h from the project. Enclose the #include from the
1133 library with extern C ...
1134 kes Add print of signal name when a signal is trapped.
1136 Release: 2.1.12 beta
1138 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1140 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1141 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1142 makes SQLit3 run 30 times faster, though a bit less safe.
1143 kes Implement --with-batch-insert in configure and detection of thread
1144 safe libraries. It is on by default, but turned off if no thread
1145 safe library (e.g. SQLite 2) is available.
1147 kes Fix Bacula PostgreSQL buffer overruns.
1148 kes Do better checking for NULL results returned from PostgreSQL;
1149 implement retry for failed queries; clear results buffer after
1150 failed query. Hopefully this will correct the PostgreSQL failures.
1152 kes Implement algorithm to handle only one appendable volume with
1153 Prefer Mounted Volumes = no.
1154 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1155 returned from a query.
1156 kes Make volume lock recursive.
1157 kes Implement an additional volume reservation algorithm that
1158 starts by considering all reserved volumes then uses the
1159 old brute force algorithm of searching the resources to
1160 find a suitable device.
1161 kes Add new reservations debug code and refine the old code.
1162 kes Update the win32/dll/bacula.defs file.
1164 kes Tweak reservations algorithm to permit a few more cases, i.e.
1165 volume reserved, but on different drive, ...
1166 kes Enhance SD status to include Pool and Media Type for drive in a
1167 more readable format (a bit longer).
1168 kes Fix PostgreSQL double free.
1170 kes Minor refactoring of restore decryption code.
1171 kes Add code to smartall.c to detect double free of a buffer.
1173 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1174 so that bsmtp will create a correct email address (mailbox only).
1175 kes Modify 'memory' command so that the buffers are listed as 'In use'
1176 to avoid confusion with Orphaned buffers.
1177 kes I reworked the OpenSSL include/lib flags to be handled in
1178 the standard Bacula way, which should fix bug #863 concerning
1179 non-standard OpenSSL libraries.
1181 kes Implement Help Browser window for bat.
1182 kes Fix reload bug that reset StorageId to zero.
1184 kes Fix TLS #ifdefing when TLS turned off.
1185 kes Ensure that when labelling a tape with Slot=0 that InChanger
1187 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1189 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1190 add DISTINCT (required by PostgreSQL).
1191 kes Implement BSOCK authenticate_director() method. Eventually will
1192 authenicate all daemons.
1193 kes Move several more functions into the BSOCK class.
1195 kes Add code to tell the OS that we no longer need a cached
1196 file that we were reading. In findlib/bfile.c. Also,
1197 only cache files that we are reading. Thanks to
1198 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1199 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1200 kes Implement script to automatically generate cats and dll .def
1201 files for Win32 dll.
1202 kes Update README.mingw32 to include new .def file generation.
1203 kes Correct typo in UTF-8 error message as reported by:
1204 jhernandez <julianhernandez@gmail.com>
1205 kes Add additional sm_check() code on debug level 1.
1206 kes Set default debug level to 1.
1207 kes Trap SIGABRT in attempt to get traceback.
1209 kes Reduce bat connect timeout from 30 to 15 seconds.
1210 kes More restructuring and implementing BSOCK class in place of
1212 kes Remove a few unnecessary malloc() tests in crypto code.
1213 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1214 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1215 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1217 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1219 kes Fix Verify InitCatalog. The attributes were not pointing to the
1220 correct saved location.
1221 kes Implement message callback so that GUI is sure to get all
1222 daemon messages. Currently displayed in a dialog in bat.
1223 kes Ignore SIGUSR2 (Bacula timer) in bat.
1224 kes Apply regress patch from bug #859 to allow regress to work
1225 with Solaris compiler.
1227 kes Begin adding TLS support to bat.
1228 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1229 clean up lex.c and make it more readable.
1231 kes Move more bnet functions into the BSOCK class.
1232 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1233 kes Complete change of berrno strerror() method to bstrerror()
1235 Release: 2.1.10 beta
1237 kes Cleanup incorrect email addresses in bsmtp.
1238 kes Make bat display initial messages rather than discard them.
1240 kes First cut of adding .mod to the run command.
1241 kes Implement auto display of messages in bat.
1242 kes Enhanced preferences to allow all Bacula output to be
1245 kes Try to make bsmtp date routines more generic.
1246 kes Fixed bug #856 autochanger documentation.
1247 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1248 kes Add new cats entry point so Win32 builds.
1250 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1252 kes Do better checking for the MySQL 64 bit libraries looking for both
1253 .a and .so libraries.
1254 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1255 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1256 kes Require the thread safe version of MySQL during configure. Thanks
1257 to Andre Noll for pointing this out.
1258 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1259 continuing in migration code.
1260 kes Apply implementation of tray-monitor font derived from gnome-console
1261 submitted by Andreas Piesk <a.piesk@gmx.net>
1263 kes Eliminate important memory loss in SQLite
1264 kes Fixed the batch insert MySQL thread specific data that was not
1265 being freed. See cats/mysql.c:db_thread_cleanup().
1266 kes Fix restore before command.
1267 kes Convert old hdr.name to name() in a few places.
1268 kes Implement update jobid command.
1269 kes Return all time_t dates in db_get_job_record()
1270 kes Stop watchdog in SD earlier.
1271 kes Put Pool just after Storage in please mount message.
1272 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1275 kes Update the po files.
1276 kes Fix Verify InitCatalog by making it cache attributes.
1278 kes Change name bacula-bat to bat for man 1 page to correspond to
1280 kes Check for client and store NULL pointers in status command. This
1282 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1283 kes Fix sign extended editing of %p.
1284 kes Clean out a little old #ifdefing in cats/mysql.c
1286 kes If time diff between DIR and FD is more than 600 seconds convert
1287 INFO message to WARNING.
1288 kes Implement heap size display in status for all daemons.
1289 kes Attempt to fix MySQL db open memory loss (not successfull).
1290 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1291 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1292 Query. This looks like a MySQL but but by doing extra releases,
1293 the memory goes away. This should fix bug #847.
1295 kes When backup fails, cancel SD before waiting for sd termination.
1296 kes If SD is waiting for FD to connect during cancel, wake up the
1298 kes Fix fsf code so that errno is correctly reported.
1299 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1301 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1302 so that Bacula doesn't later stumble into a seg fault.
1303 kes Use the term Restore Client in the restore Job report.
1304 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1305 the original job's FileSetId.
1306 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1307 spooling in migration jobs. Not yet tested.
1308 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1309 reading conf file from a pipe. However, do it with open_bpipe()
1310 rather than popen. Not yet tested.
1312 kes Fix an ugly bug where the VolCatBytes were getting updated
1314 kes Implement bconsole memory command that prints current memory
1315 usage, plus smartalloc dump.
1316 kes Clarify some error messages in backup, admin, and migrate.
1317 kes Shrink label dialog to smaller size.
1318 kes Invert Cancel OK buttons on restore to be OK Cancel.
1319 kes More strerror() to bstrerror() conversions.
1321 kes Start implementing bstrerror() in place of strerror().
1322 kes Stripping path -- seems to work.
1324 kes Prevent door and port files from being restored (mostly
1326 kes Free an unreleased buffer in compat code.
1327 kes Change console Job name from *Console* to -Console- to eliminate
1328 Win32 filename problems. Put Win32 path separator when creating
1329 Console file. This fixes bug #846.
1330 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1332 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1334 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1335 to force Win32 error message.
1337 kes First cut strip path. The data should be passed to the FD,
1338 but nothing is done with it yet.
1339 kes Enhance the digest and signature routines in the crypto
1340 library to accept a JCR and to use it to print error messages
1341 so that they will go in the Job report rather than the daemon's
1343 kes Simplify some of the verify signature code.
1344 kes Simplify a few of the alternative returns in the signature
1347 ebl Use only POSIX regex instead of GNU regex in breg.c for
1348 File relocation. It fix broken freebsd compilation.
1349 kes Convert all other Dir files to use new ua class message
1351 kes Tentative fix for missing digest signature in bug 807.
1352 kes Correct handle problem in new win32_ftruncate routine.
1353 kes Convert ua_purge.c and ua_update.c to use new ua class
1354 message routines for bat.
1356 kes Correct incorrect installation of LICENSE in Win32 installer.
1357 kes Display LICENSE at the beginning of the Win32 install.
1358 kes Attempt to correct the need for the png files to be installed
1360 kes Reapply my bat.conf install script in qt-console. I think I
1361 editted bat.pro instead of bat.pro.in and it was lost.
1362 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1363 the /var/lock/subsys for subsysdir. Also corrects typos in the
1366 kes First cut update job.
1367 kes Correct configure to include qmake of src/qt-console directory.
1369 kes Make restore job yes/mod/no print in one command so GUI works.
1370 kes First cut implementing backup and restore client.
1371 kes Correct editing in Verify output that caused a seg fault.
1373 kes Insure that bat.conf is not overwritten during installation.
1374 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1375 while I was implementing migration in March 2006 !
1377 ebl Cleanup file relocation, using char *RegexWhere instead of
1378 char *where + bool where_use_regexp
1379 kes Update some manpages and add bat manpage.
1380 kes Make a first cut at converting bacula.spec.in for bwx-console
1382 kes Apply patch from John Goerzen to add hostname as fourth argument
1383 to make_catalog_backup script.
1384 kes Fix typos I introduced into bsmtp.c
1385 kes Make pm_strxxx() routines handle input of NULL pointer. This
1386 is to protect from NULL pointers returned from SQL databases.
1387 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1388 kes Add more debug to FIFO code -- fix fifo regression test.
1390 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1391 kes Add thread timer to bnet_connect() to break from OS if wait time
1394 kes Update Win32 build to include new files, new symbols, and
1396 kes Implement socket level heartbeat (tcp_keepidle)
1397 ebl Commit File relocation patch
1398 kes Make bat have 'make install' target.
1399 kes Warn during install if old gnome-console binary found.
1400 kes Warn during install if old wx-console binary found.
1401 kes Add -8 option to bsmtp command line to add content type utf-8.
1402 Fixes bug #809. (Character coding problem in bsmtp).
1403 kes If < is found in target (from, to, cc) then do not enclose the
1404 target in < > in bsmtp. Fixes bug #772 (malformed address).
1405 kes When printing certain items in dbcheck, stop after 300000.
1406 Fixes bug #822. (dbcheck loops).
1407 kes Incorrect status in Dir after waiting for mount with poll set.
1410 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1412 kes Print waiting to reserve a device every 5 mins.
1414 kes Don't call close_part in label.c if tape and relabel.
1415 kes Don't free volume if busy in close() -- should help with
1417 ebl Fix #824 RunScript bug (After script could be execute twice)
1418 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1419 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1420 Add a regression script to test RunScript
1422 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1425 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1426 deprecated. No additional bugs will be fixed, and they will be dropped
1427 in a future release (probably 2.4.0).
1428 kes Change name of wx-console to bwx-console to make it more Bacula
1430 kes Change the name of gnome-console to bgnome-console to make it
1433 kes Some time in March, a Feature Request with patch from Jorj Bauer
1434 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1436 The ability for the director to validate a Client (FD) CN against
1437 an arbitrary set of patterns rather than the hostname, with
1438 A new 'TLS Allowed CN' set of directives which are implemented
1439 in the Client resource. Then pattern matching is used in place
1440 of hostname matching against the Certificate's CN. As an example, we
1441 have certificates which (a) use a local CA, and (b) have a CN of the
1443 kes Add new/changed entry points to Win32 build
1444 kes Create unaccepted-projects for projects that are not accepted.
1445 kes Simplify locking in the reservations system.
1446 kes Add more debug code in reservations.
1447 kes Make sure error condition on reserving a volume is handled correctly.
1448 kes Correct handling of volume_in_use.
1449 kes Correct handling of initializing a device.
1450 kes Move handling of broadcasting releasing a device into release_device().
1451 kes Correct attaching dcr to dev so that it is only done if device
1452 is properly initiated.
1454 kes Locking debug level tweaks in SD.
1455 kes Tweak new Volume code.
1457 kes Add exec external-command [wait-seconds] to bconsole. This
1458 executes the external-command. Note! normally external-command
1459 should be enclosed in double quotes.
1460 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1461 it should normally be off in a production system.
1463 kes Implement die command for SD so that we can force it to dump.
1464 kes Implement SD lock debug code.
1465 kes Implement new algorithm for keeping Volume list in SD. It
1466 is now owned by the device.
1468 kes Implement new code for freeing in use volumes that should
1469 resolve if not all, some of the problems of multiple drive
1470 tape conflicts described in bug 801.
1472 kes Fix gui/bacula-web/images files in svn.
1473 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1475 ebl Fix a bug in batch mode (in string escape)
1476 kes Correct migration prune SQL typo that crept in in a
1477 recent 2.1.x change.
1479 kes Move bnet_despool() into class in bsock.c
1480 kes Modify job report to include director name and Build OS.
1481 kes Move drop root privilege and check_catalog() before fork.
1482 kes Add update database scripts (version 9 to 10) to updatedb directory.
1484 ebl Check size and age of each file after its backup to see if
1485 it has changed during backup, if 'checkfilechanges' is set.
1486 The FD will do an extra check (stat(2)) after
1487 each file backup. mtime, ctime and size are compared with
1488 'before backup' information. If time or size mismatch, an
1489 error message will be generated. You must upgrade FD to use it.
1491 kes Make database name and user configurable
1492 --with-db-name=xxx --with-db-user=xxx
1493 kes Add back database type to message.c for debugging.
1495 kes Implement dir_sql() which issues an SQL query.
1496 kes Modify bat medialist to use dir_sql() and do some minor C++
1497 formatting as well as eliminating a number of pointers, simplifing
1500 kes Fix some of the mtx-changer grep commands for tape label readers.
1501 kes Convert a number of bsendmsg into the appropriate send/warning/error
1502 message class calls.
1503 kes Suppress the using database message in the .sql command.
1504 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1506 kes Add context menu for floating a window.
1507 kes Some minor cleanup and name changes in qt-console
1508 kes Add doing mt setblk 0 in Win32 mtx-changer.
1509 kes Apply Martin's bug fix to move definition of ENODATA for
1511 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1512 sqlite2 and sqlite3.
1514 kes More pruning cleanup.
1515 kes Turn on wait_for_drive by default in mtx-changer.
1516 kes Turn on Batch insert code by default as it now passes regression.
1517 kes Add ./configure --enable-bat to enable building of Bat.
1518 No install yet though.
1520 kes Implement a new .sql command for bat.
1521 kes Implement code to turn off pruning in obtaining the next volume.
1522 Pruning is turned off for the status dir command, but turned on
1523 for SD requests and for the list nextvolume command.
1525 kes Correct Qmsg() that was not updated correctly when committing a
1526 previous change (probably the recent TLS patch).
1528 kes Write new subroutine is_volume_purged() that explicitly checks
1529 if the Volume is purged, and if so marks it as such. This should
1530 resolve problems reported about needing to mount twice to recycle
1532 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1533 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1534 amount of duplicated code.
1535 kes Do volume pruning only for the Media Type desired (reduces pruning time
1536 if multiple Media Types are in the same pool).
1537 kes Implement more detailed info in the Job report for the Bacula version
1539 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1541 ebl Add bbatch tool to bench database and insert mode.
1542 Fix sql quote stuff in batch mode
1543 Fix sql stuff for mysql
1545 kes Correct problems with am/pm scheduling. Fixes bug #808.
1546 kes Implement new prunning code that prunes up to 1000 jobs at
1547 the same time. The same technique can be applied to a number
1548 of other prune/purge subroutines.
1549 kes Add an insanity check when starting a new tape job to ensure
1550 that the tape position has not been changed. If so fail the
1552 kes Fix Win32 build for dlls to add the folllowing:
1553 src/lib/bsock.c -- new file with new entry points
1554 src/lib/dlist.c -- new entry points
1555 src/cats/sql_create.c -- new entry point
1556 src/cats/sql_cmds.c -- new DATA item exported
1558 ebl batch mode cleanup bscan-test is ok now.
1559 kes Implement SD code to check length of disk volume before appending.
1561 kes Correct return status on db_batch... routines.
1562 kes Add call to db_write_batch_file_records() to migration code.
1563 ebl Fix AfterJob timing
1564 kes Move the checking of the database in initializion of the Director
1565 to after we drop privileges. This avoids the need for both root
1566 and bacula access to the DB.
1567 kes Correct a misplaced variable definition in src/filed/backup.c
1568 kes Correct how the new batch insert db_create_attributes_record()
1569 uses the arguments. Caused a seg fault in bscan.
1570 kes Implement lock() and unlock() methods in DEVICE class.
1571 Implement block() and set_block(xx) methods in DEVICE class.
1572 kes Modify bnet_connect() so that it uses time() to check for the
1573 wait time expiring (on some OSes, some system calls may not
1574 return immediately).
1575 kes Modify Verify to obtain the previous JobId when it is actually
1576 running rather than at schedule time (as it was in 1.38.x).
1577 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1579 kes When checking pid in pid file, continue running if the pid is
1580 the same as ours. This occurs on IRIX after a system crash.
1583 kes Extend new GUI API.
1584 kes Make the ua structure a class, and implement send_msg(),
1585 error_msg(), warning_msg(), and info_msg().
1587 kes Apply fix from for building wx-console on the Mac from
1589 kes Implement new select mechanism for GUI programs.
1590 kes Reorganize initialization of stackedWidgets in bat.
1592 kes Add updated nagios plugin supplied by Christian Masopust.
1594 kes More bat implementation.
1595 kes File migrate bug with Pool Occupancy using mediaid instead
1596 of jobids. Fixes bug #795.
1597 kes Fix orphaned buffers in filed backup and verify due to
1598 crypto buffers not freed during errors. Fixes bug #789.
1599 kes Extend new GUI api code to tree commands.
1600 kes Ensure that tree and dot commands check console ACLs.
1601 kes Permit marking directory with trailing slash.
1602 kes Allow 20 console connections (instead of only 10).
1604 kes Add smartctl call to bacula-sd.conf as an example of getting
1607 kes Modify jobq.c to let simultaneous restore jobs run. This may
1608 cause them to fail if they cannot get a drive.
1609 kes Add Client Connect Wait to Storage daemon to permit users to
1610 modify the time the SD waits for a FD connection.
1612 kes Correct virtual changer check which was backwards. This caused
1613 volumes to be unloaded into slots already occupied.
1615 kes Apply Command ACL filter to JobId list in restore command.
1616 kes Correct typeo in var.c patch.
1618 kes Don't let Bacula prune File or Job records for the current Job.
1619 kes Fix variable substitution pad + inc bug reported (with patch)
1622 kes Correct SQLite log table index as reported by Luca Berra.
1624 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1626 kes Begin implementing new comm signals for API.
1627 kes Fix a few places in lib/message.c where the open fd may
1629 kes Continue implementing lib/bsock.c (real class). Make jcr,
1630 who, host, and port private. There are new methods to access
1631 them for non-class use. This required touching a number of files.
1633 kes Add LANG=C to autoconf/randpass so it works with languages other
1634 than English. Fixes bug #788.
1636 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1638 You will not be able to generate Include/Exclude list any more.
1639 It will be fixed soon.
1640 If you want to use this, you can apply
1641 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1643 kes Restore of sockets created false error messages because Bacula
1644 no longer restores sockets, but the code was still trying to
1645 set the attributes on a non-existent file. Reported by a user.
1646 ebl finish RecyclePool feature
1647 Media will takes Pool.RecyclePool
1648 when moving from Scratch to a Pool or when user will do
1649 update volume=xxx frompool
1650 To use it, add RecyclePool = aPool to your Pool resource
1653 RecyclePool = Scratch
1657 kes Expand new BSOCK class adding signal() and new BNET signals.
1658 kes Begin enhancing the dot commands adding a new API function
1659 that returns more information and will make it easier
1660 to interface to the Director from a program.
1662 kes Make DEVICE fd private. Its new name is m_fd, and can be
1663 obtained with dev->fd() outside the class. This is the
1664 first of many DEVICE members to be made private.
1665 kes Implement Michael Renner's idea on having a virtual disk
1666 changer. I made some minor modifications (e.g. I did not
1667 implement the Virtual Changer directive, but simply set
1668 the Changer Command to an empty string.
1670 kes Implement a BSOCK send() method that writes the whole record
1671 in a single write() request rather than in two.
1672 ebl add update volume=xxx recyclepool=yyyy
1673 volume takes recyclepool from pool when using update volume=xxx from pool
1675 kes Fix encryption deblocking bug, which caused some restored files
1676 to be truncated. This fixes bug #763.
1677 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1678 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1680 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1681 ebl Use btime_t instead of uint64_t in media patch.
1683 kes Optimize the use of the database a bit in the Status dir command.
1684 Only open it when needed, ensure that if any previous database
1685 was opened, it is closed.
1687 kes Correct VolCatBytes bug from media patch.
1688 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1689 in the case of orphaned records.
1690 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1691 and File records in 300K chunks to be more efficient. This
1692 idea came from Juan Luis Frances (if I remember right).
1693 kes Apply Eric's scratch patch that moves a purged Volume to
1694 the RecyclePool. Question: how is RecyclePool set? what
1695 happens to the ScratchPool?
1696 kes Apply Eric's media patch that collects read/write media
1697 times as well as byte counts. This patch requires a
1698 simultaneous upgrade of the DIR and SD. Note, there
1699 should be some way to turn off timing. I'm not sure
1700 times are in Bacula units.
1701 kes Apply Eric's batch-insert patch.
1703 kes Update projects list.
1705 kes Implement Include/Exclude file lists in FD as dlists using
1706 the new dlistString class. This permits efficiently having
1707 large include/exclude lists and completes project Item 25.
1708 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1709 console is authorized to cancel the job. This fixes bug
1711 kes Modify SD so that the VolCatJobs medium record is updated
1712 at the beginning of a Job rather than the end. This
1713 fixes bug #775 where exceeding MaxVolJobs caused jobs
1715 kes Added a mutex around getting and setting Volume information
1716 so that multiple simultaneous jobs will single thread.
1718 Switch to using Subversion
1719 kes Remove src/pygtk-console/ from configure
1721 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1722 plus the entrypoints.
1723 kes Apply patch supplied that corrects debug print
1724 in canceling jobs for max run time. Supplied as
1725 part of bug #621, which was previously fixed.
1727 kes Test on job_canceled() and sd_msg_thread_done inside
1728 loop starting the message thread to avoid a race condition.
1730 kes Remove rl_catch_signal from console.c as it conflicted
1731 with the header definition. Fixes bug #765.
1732 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1734 kes Clarify some stored/acquire messages to indicate if the
1735 problem is with read or append.
1737 kes Fix memory leak with storage ids in cats/sql_get.c
1738 kes Terminate watchdog earlier to avoid reference to released
1739 memory -- reported by Jason Austin.
1740 kes Move closing the database from jobq.c to the director daemon
1741 termination routine. This fixes memory leaks for shadow jobs
1742 (i.e. migration jobs).
1743 kes Free up the unique jobid chain items in migrate.c. This fixes
1744 a memory leak problem.
1745 kes Convert some ugly looking for statements to use foreach_alist
1746 in findlib/find.c. This will facilitate converting the structures
1747 to use dlist (for large include/exclude lists).
1748 kes Fix a bug in the btree.c and btree.h routines, then rename them
1749 rblist and add them to be built in src/lib. Include some new
1750 methods written by Rudolf Cejka that make the code more readable
1751 (hides some of the ugly casting).
1752 kes Add set_next() and set_prev() methods which make the code much more
1753 readable. Also add a new dlistString class that facilitates storing
1754 strings in dlists. To be used in the large include/exclude lists.
1755 kes Make some trivial modifications to lib/tree.h that use rblist
1756 rather than dlist for storing the tree links. This was suggested
1757 by Rudolf Cejka. The result of this is that the restore tree now
1758 uses red-black binary trees rather than simple linked lists. This
1759 should give rather dramatic speed improvements for directories
1760 contining large numbers of directories/files (more than 10000).
1762 kes Fix maxruntime bug #621.
1764 ebl Implement the include JobID in spool file name project.
1765 kes Reorder projects file in order determined by Jan 2007 vote.
1766 kes Implement item #12 on project list -- quick release of FD by
1768 kes Fix open of SQLite3 db where user does not have write permission
1769 so that DIR does not crash. Fixes bug #761.
1771 kes Add back missing @ in Win32 Makefile.
1772 kes Change 'Device not configured to autolabel' from INFO
1774 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1775 which should restart an indefinite # of times.
1776 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1777 other DIR specifications.
1779 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1780 Fix path quoting in SQLite scripts.
1781 Fix problems with SHGetFolderPath.
1783 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1785 kes Fix Job restart on error bug that promotes an Inc to a Full
1786 backup. This should fix bug #755.
1787 kes Add qt-console and first cut of code.
1791 kes Fix Bacula->Documentation link on Win32 to point to index.html
1792 instead of bacula.html. Fixed bug #750.
1793 kes Return JobId in db_get_job_record() when JobId==0. This should
1795 kes Do not release source pointers when restarting a failed job.
1797 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1798 This *should* fix bug #747.
1799 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1802 kes Modify USTORE constructor to set an empty store_source string,
1803 and don't copy the store_source string in a cancel. Hopefully
1804 this will fix Arno's seg fault, bug #744.
1805 kes Add back code to disable conio in configure. Fixes bug #743.
1806 kes Correct the Options scanner in the FD to correctly handle
1807 SHA1 option, which was eating the next option. Reported by
1809 kes Add code to indicate when the SD is spooling, spool wait, and
1810 despooling as requested by Alan Brown.
1812 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob