1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Add debug code to SD.
29 kes Fix renaming a Volume, which used the wrong Volume name.
31 kes If operator has rewind tape, print warning, release tape and
32 try once more. If tape is positioned somewhere, something went
33 wrong, so mark the tape in error and try once more. Previously
34 this error was fatal, now it produces an error message.
35 kes Ensure correct volume name displayed during restore
36 kes Ensure that Volume is mounted for restore.
38 kes Fix a few more Coverity reported problems.
40 kes Apply Allan Black's status dir job count patch.
41 ebl Add information about IMPORT/EXPORT slots in mtx-script.
42 kes Enhance a couple of SD debug messages.
43 kes Tweak unload flag setting and ensure it is set during swap.
45 ebl Fix #1091 about bad output in estimate command.
47 kes Modify autochanger locking to attempt to avoid race
49 kes Make sure device not busy before doing label command.
50 kes Display open() errors except when polling. Previously too
51 many were suppressed. This should fix bug #1070.
52 kes Fix Win32 reparse points. Bacula will not recurse into any
53 reparse point directory, including mount points, unless the
54 directory is explicitly mentioned at the top level (same as
55 with Unix). A file that is linked to another file will be
56 backed up -- much as Unix does for hardlinked files.
59 kes Remove double quotes from ChangeLog and ReleaseNotes
60 kes Remove StorageId test when pruning and recycling (Eric's changes).
61 kes Remove old form of locking when getting volumes -- causes deadlock.
62 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
63 the name unique and to eliminate compile time error.
64 kes Add accurate.o to Win32 FD Makefile
66 kes Fix cats dll build on Win32 after db_update_job_end_record
67 calling sequence change.
68 ebl Switch to tokyo dbm instead of htable in accurate code
69 ebl Include tokyo dbm to bacula source tree
71 kes Fix buffer overruns detected by Coverity.
73 kes Tweak joblog display.
75 kes Implement --without-qwt
76 kes Fix layout of restore tree dialog
77 kes Add configure bat QWT libraries, so that bat can be built
78 with or without the QWT libaries.
80 ebl Add dummy tape driver for regression tests.
81 kes Make sure we unload the right slot when swapping.
83 kes Add debug times, reduce size of two-pool-changer test
85 ebl Tweak autoconf scripts for faketape
87 kes Improve SD reserve debug code.
88 kes Testing an improvement to free up volumes no longer in use.
90 kes Rework SD acquire for read to handle autochanger Volume
92 kes Implement regression that explicitly tests swapping a Volume
93 from one drive to another.
94 kes Enhance disk-changer to detect most error conditions.
95 kes Fix SD code so that it properly swaps a Volume between drives.
98 kes Apply libdbi patch from Joao Freitas for regress and for
99 Bacula trunk. Regress now works with libdbi. Nice.
100 kes Apply .nobackup patch from bug #1077 submitted by
102 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
103 name into jobs cloned via the run directive.
105 kes Prevent a Volume that is being swapped from being freed from
106 the volume list. This will most likely fix, at least partially,
108 kes Fix strippath so that it does not get a buffer overrun and crash FD.
109 This fixes bug #1078.
110 kes Remove 50 millisec wait in SD that broke debugger.
111 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
112 that a job may run, counted from when the job was scheduled.
113 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
114 a job may block waiting for a resource, counted from when the job starts
115 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
116 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
117 that implements multiple commands per line in the console when using
118 readline. Modify the default to use a semicolon as the command separator.
120 ebl Fix SQL query in migration code.
121 ebl Make accurate mode with hash disk pass regression tests
123 ebl Implement first cut of accurate backup with hash disk.
125 kes Force unload of volume when wrong volume mounted in SD.
127 kes Fix bat seg fault at termination.
128 kes Add Bacula generated version to bat about box.
131 kes Experiment with allowing multiple read jobs.
132 kes Move final volume swapping code to DCR method and
133 call it from acquire_for_read().
134 kes When wrong volume is mounted during read, unload_autochanger.
136 kes Integrate the libdbi changes from Joao Henrique Freitas
138 kes Stop searching for Volumes in SD askdir if DIR returns the
139 same volume name twice in a row.
140 kes Close bat console windows first to eliminate error message
143 kes Tweak the swap Volume from one drive to another code so that
144 it now seems to work.
145 kes Resolve several problems with recycling that broke the new
146 code (these problems are in 2.2.9 as well).
147 kes Remove the volume lock when calling the sysop code.
148 kes Don't mark a reserved volume with no writers as unused otherwise
151 kes Rework class structures for VOLRES, DCR, and DEVICE to make
152 the method names a bit more logical, and for more logically
153 handling the responsibilities.
155 kes Remove redundant code in terminating the scheduler that just
156 causes a seg fault in many cases.
157 kes Cleanup releasing a volume and make it a DCR method.
158 kes Improve algorithm for detecting pre-reserved volume and
161 kes Tweak volume swapping code so it works.
162 kes Correct name overloading in mount.c
163 kes Replace released flag in VOLRES with reserved and add access
164 methods for the VOLRES class.
165 kes Prevent volume from being released while being swapped.
166 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
168 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
170 kes Refactor parts of stored/mount.c
172 ebl Add sanity checks for VolWriteTime and VolReadTime
173 ebl Take care of bad clock changes while computing VolWriteTime
174 and VolReadTime. This should fix or limit #1066
175 kes Correct error string numbers in dird/catreq.c
176 kes Restructure reserving, acquiring, and mounting volumes. Calls to
177 autochanger are deferred for mount.c -- simplifes the code.
179 kes Do not prune any running job. It just fails the job.
180 kes Lock the volumes when changing dev->reserved_device and marking
181 the volume unused otherwise the device can get reserved by
182 another job before the volume is released, thus blocking it.
184 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
185 kes Fix bug #1063, reuse of freed ptr in list nextvol.
186 kes Release regex compile buffer in filed/job.c
187 kes Add proper type of const char in sql_create.c
188 kes Turn off debug in daemon termination routines
189 kes Move free_volume_list() before devices are freed in stored.c
190 kes Fix reference to uninitalized stack variables in bregex.c.
191 This should correct bug #1067.
193 kes Fix possible seg fault in SD when freeing a volume entry.
195 kes Implement unload_dev() before swap device.
196 ebl Add statistics prunning with option and menu
197 kes Separate unload_dev() from unload_other_device() in autochanger.c
199 kes Apply patch from bug #1069 that corrects spurious error messages
200 when ACLs enabled on SGI but no ACL exists.
201 ebl Fix small segfault in bacula-sd when debug level is 500
202 kes Modify run_program() and run_program_full_output() to use
203 call by reference for the results string. This corrects a long
204 standing problem where the address of the string may be changed
205 in the subroutine but not in the calling program.
207 kes Re-enable code to remember last volume mounted on a non-tape
209 kes Add patch supplied in bug #1068 that fixes a SD crash when using
210 a Virtual autochanger.
211 kes Generate correct JobMedia records during spooling/despooling when
212 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
213 <tih@hamartun.priv.no> for excellent analysis and testing.
215 kes Tweak hash algorithm for htable using Martin Simmons idea
216 for doing a circular shift.
217 kes Remember what volume is in VTLs (previously turned off for
219 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
220 pointed out some problems in creating JobMedia records during
221 spooling with concurrent jobs. Fix the problem by updating the
222 start file position before despooling and generate a jobmedia
223 record at the end of despooling.
225 kes Fix handling of JobMedia records during spooling and when a
226 Volume is changed without actually writing data to the Volume.
228 kes Rework certain SD locking based on gdb tracebacks of deadlocks
229 sent by Eric. This code now uses only the volume_lock() rather
230 than the reservations lock when at EOM and acquiring a new
232 kes Ensure only one exit point in several subroutines.
234 kes Implement bsock code to permit locking. Use the new code in Verify
235 in the FD to prevent the heartbeat thread from disrupting the Verify
236 data sent to the Dir.
237 kes Modify SD locking to eliminate locking the reservations system from
238 outside the system. Use the volume lock when getting media data
239 and reserving a new volume at end of media.
240 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
241 when SD starts are not locked into place.
243 kes Fix error compiling runscript code on 64 bit machines.
244 kes Tweak Win32 mount point code.
245 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
246 cleared giving bad file estimate).
247 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
250 kes Keep Schedule run lists in order as suggested by
253 kes Implement autostart scripts for Debian.
254 ebl Implement upgrade catalog scripts.
256 ebl Apply jobstat patch for long term statistics. Have to implement
257 purge stats command and upgrade scripts.
258 kes Fix mtx-changer.in for broken Debian mt program.
260 kes Fix large number of JobMedia records reported by Eric Bollengier.
262 kes Apply doc fix from bug #1062.
263 kes Resolve crash and improper restore wx-console Win32 restore
264 GUI. Fixes bug #1065.
265 kes Update Win32 wxWidgets to latest version.
266 kes Attempt to do correct handling of Win32 mount points. Should
268 kes Fix Win32 FD backup/restore memory leak due to improper termination
269 of BackupRead/Write. This fixes bug# 1038.
271 ebl Reduce memory usage for accurate backup, working only with ctime
272 and mtime. (not all Lstat field)
273 About 40MB for my linux system (400.000 files)
275 kes Add dcr->reserved_volume flag that allows us to release a volume
276 even if it is not vol->released. This allows maxvol2 to work when
277 Volumes expire and we are already writing to the device (i.e. a
278 volume is pulled out from under us by another job terminating after
279 we reserve the drive).
281 ebl Permit multiple command/console per runscript definition.
282 RunScript { command = /bin/true ; command = /bin/false ... }
283 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
284 (restart an application) just after the VSS snapshot on windows.
285 kes Don't zap dcr values during release_volume() as they might
286 have the next Volume to be mounted.
287 kes Fix AIX prototype.
289 kes Second cut of drive switching during backup.
292 kes Update Win32 version of wxWidgets to most recent version.
293 kes Tweak Copy job details.
294 kes Rework dir_find_next_appendable_volume to make a bit more effort
295 to find a suitable volume before giving up.
297 kes Make ask_sysop_to_create... to return if waken from wait.
298 This helps get out of blocked conditions.
299 kes Experimental implementation of switch_device in reservations.
300 kes Implement FD version to allow easier protocol changes.
301 kes Add Plugin Options string -- not yet passed to FD.
302 kes Implement PluginOptions ACL.
304 kes Attempt to correct problems with restores with autochangers and
305 use counts going negative
306 kes Rework SD status command and implement API for bat. Implements
307 header, runing waitreservation, devices, volumes, spooling,
308 and terminated status keywords.
309 .status storage=xxx <keyword>
310 kes Clarify TLS error message by adding double quotes around name.
311 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
312 kes Pass jcr to tls routines so debug messages can be handled better.
313 kes Rework jobq resource allocation code, and possibly fix a bug
314 that caused reference counts to get out of sync.
316 kes Rename fd/dir plugin to use Bacula standard underscore.
317 kes Plugin work -- bring dir up to fd level.
318 kes Start implementation of VTL code
319 kes Fix Win32 build after adding new cats subroutine.
321 kes First cut at Duplicate Job implementation.
323 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
324 kes Start PluginOptions string, and refactor a bit of ua_run.c
325 ebl Apply Allan patch that permit to reset recyclepool.
327 kes Test patch -- possible fix or improvement for bug #1053
328 kes Refactor FD and SD status commands to permit new API code in
329 SD, and to fix Win32 build.
330 kes Win32 build is now working.
332 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
333 some ideas in patch from Scott Bailey.
334 kes Begin implementation of duplicate Job control.
335 kes Fix some of Win32 build after recent additions.
336 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
337 which causes the FD to detect whether or not the OS has the
338 honor no dump bit (*BSD systems), and if so, to skip backing up
339 any file with this bit set. The feature is enabled by setting
340 'honor no dump flag = yes' in the Options section of a FileSet.
342 kes Correct po warning message with datarootdir
343 kes Implement more code in dird.c to put configuration parsing in
344 a class rather than use globals.
345 kes Restructure SD status command for implementation of bat API
348 kes Suppress incorrect 'Will not descend from x into y' messages.
349 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
350 daemon globals used by parser.
351 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
353 kes Fix free of plugin_list when none exists.
355 ebl Apply accurate project patch.
357 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
358 on non-mempool object)
359 kes First cut of converting FD .status to work with bat API.
361 .status client=XXX header
362 .status client=XXX running
363 .status client=XXX terminated
364 kes Implement first cut of Copy Job.
365 kes Implement Catalog in Pool resource. It overrides catalog specified
366 in the Client resource.
368 kes Apply patch (with some difficulties) from Joao Henrique Freitas
369 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
371 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
372 ftruncate() actually works. In the case of some (cheap) NAS devices,
373 it does not, and so recycling NAS Volumes does not work. The code
374 simply unlink()s the file, then recreates it. This fixes bug #1011.
376 kes First incomplete cut of big malloc blocks for htable.
377 kes Tweak plugin code.
379 kes Plugin debug code + tweak a couple bat dialog layouts
381 kes Fix creating first JobMedia record during Migration to include
382 proper index. This caused slow restores of migrated jobs.
383 kes Temp fix to plugin name file_index.
384 kes Bacula backed up and restored a MySQL database.
386 kes Implement plugin restore.
387 kes Implement parsing of db_driver to give db_type index.
389 kes First cut of plugin restore code.
390 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
391 and do not strip paths on symbolic links.
392 kes Set catalog backup database and user name from values specified on
393 the ./configure line.
394 ebl Fix #1031 about wrong pool source information in job report.
397 kes Remove a redundant jcr argument to find_files, match_files, and
399 kes Implement '.status dir header|scheduled|running|terminated' that
400 prints the requested status section. With the exception of the
401 header, the other reports have fields separated by tabs (\t).
403 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
404 a resource embedded run command to find a since time if no explicit
405 since time was supplied on the command line.
406 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
407 that updates the state file at job termination time in addition to
408 when the daemon terminates.
410 kes First version where a plugin did a backup.
411 bpipe-fd.so created a backup file, wrote a test
412 string to it, and Bacua could restore this fabricated file.
414 kes Implement DB Driver = string for the DBI driver.
415 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
416 kes First cut of code for loading Win32 plugin dlls. Implement
417 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
418 and implement a dlfcn.h file based on opengroup's definitions of
421 kes First cut plugin directives.
423 kes Apply patch from bug #1049 to prevent stripping the path on a
425 kes Attempt to fix bug #1047 where stripping a path corrupts the
426 heap. Waiting for feedback.
427 kes Correct the Mount message not to suggest labeling a new tape
428 when doing a restore. Submitted by email by John Stoffel.
429 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
430 FD by using casting. Reported in bug #1042.
432 kes A bit of crypto cleanup. More later.
434 Release Version 2.2.8
436 kes Apply patch from Martin to correct bug #1040, bscan sets existing
438 kes Fixed important spelling error in doc -- bug #1045.
440 ebl Fix bextract to be able to extract non-portable Win32 data to
442 kes Move initialization of read/write res lock earlier in the code.
443 This fixes the crash with a null conf file. This fixes bug
445 kes Redefine CURES in lib/parse_conf to be URES and move it all
446 into lib/parse_conf.c -- this responds to bug #1042, but does
447 not fix it. The fix is not to compile with FORTIFY_SOURCE.
448 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
449 the trunk SVN. I don't think this was reported as a bug.
451 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
453 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
455 kes Add DataDespooling and DataCommitting status (committing is
456 the last despooling).
457 kes Finish implementation of new reservations code noted below.
459 kes Fix bsnprintf for float point numbers. I broke recently when
460 parameterizing some variables. This fixes bug #1036.
461 kes Undo recent reservations changes ... will apply them later
462 when they work better.
464 ebl Fixes #1034 which cause mysql to hang the connection after 8h
465 ebl Change default statistics target of filename.name and path.path
466 fields for PostgreSQL. This speeds lookup by indexes. Thanks
468 kes A few more tweaks to new reservation code. Make sure to clear
469 vol released flag when retaking volume. When reading label and
470 label is bad mark volume unused. When recycling, mark volume
471 unused so it can be renamed.
473 kes Fix reserve_volume() so it doesn't release a volume in use
474 (i.e. a volume entry not marked released). This should be
475 the last part needed to fix bug #1018.
477 kes Move Heartbeat documentation from Job to Director resource.
478 This fixes bug #1033.
480 kes Fix existing switch drive SD code to call autochanger to release
481 any old volume. This must be done to keep the autochanger from
482 releasing subsequently newly reserved volumes in doing a close().
483 This should fix bug #1018.
484 kes Fail if attempting to get console input in batch mode. This
485 should help fail RunScript console commands that are incomplete.
486 kes First cut implementing switch_drive() in SD (not actually called).
488 kes Implement first cut running console commands in a RunScript.
490 ebl Fixes bug #1028 where 'Selection Type' option was not usable
492 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
495 Release Version 2.2.7
497 kes Add new free_tls() entry point so that Win32 builds.
498 kes Fix compile warning in src/lib/util.c
499 kes Fix entry point for edit_job_codes() so that Win32 builds.
500 kes Fix seg fault Frank Sweetser reports in regression testing
501 on his systems. The problem was that the original author of
502 bsnprintf.c did not take into account the side effects of
503 using ++x in the argument to a #define.
504 kes Make SD protocol backward compatible with version 2.2.x.
506 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
507 because Bacula no longer restores sockets.
508 ebl Always use ignorecase fileset option on win32 FD.
510 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
511 that implements double quoting include names in conf files,
512 and also allows piping input by having the first character
513 be a vertical bar (|).
514 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
515 that implement %f in RunScripts to pass the FileSet name.
516 kes Skip leading | when lex input comes from a pipe as suggested
517 by Michael Stapelberg <michael@stapelberg.de>.
519 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
520 Nerijus Baliunas <nerijus@users.sourceforge.net>
522 kes Implement Plugin Directory and plugin events.
524 kes Implement a security enhancement: TLS authentication but no
525 encryption. Enabled by setting 'TLS Authentication = yes'.
526 Note when this is on, TLS encryption is turned OFF!
528 kes This patch corrects a problem where the maximum concurrent storage
529 jobs counter gets out of sync during restore jobs causing jobs to
530 'wait on max Storage jobs'. This patch fixes bug #1009.
532 kes This patch fixes bcopy so that it produces correct Volumes.
534 kes This patch eliminates spurious output to the console during a VerifyVolume
535 job that contains encrypted data. It fixes bug #1024.
537 kes This patch prevents the 'status dir' command from trying to use a scratch
538 volume and possibly moving it from one pool to another. This patch fixes
541 kes Add new include to postgresql.c suggested by Marc Cousins so
542 that it compiles correctly with pgre version 8.3.
544 kes Fix --archivedir addition to configure. Replace it with
545 --with-archivedir in configure.in This fixes the regression
547 kes This patch fixes bug #1012 where the job is canceled because
548 of Max Run Time exceeded when the job has not yet started.
550 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
551 one 'part' to write. Instead of each part being stored on disk,
552 written to DVD, then deleted from disk, all parts are written to disk,
553 and only the last is written and deleted from disk.
554 kes This patch fixes the status command to include the formating string for
555 JS_AttrInsterting. It fixes bug #1021.
556 kes This patch should fix the Mac OS X build problem on the latest
557 Darwin, where sys/types.h was not included correctly (apparently
558 due to a change in the Mac headers). The solution was to explicitly
559 ensure that it is defined for the ./configure.
560 This patch also has a rebuild of configure that includes the Debian
561 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
562 kes This patch should ensure that queued messages to the console are
563 displayed as soon as possible. It should fix bug 1007, but has been
564 reported not to work.
566 kes This patch fixes the infinite loop when trying to increase the
567 maximum number of volumes in a Pool during the add command.
568 This patch fixes bug #1008.
570 Release Version 2.2.6
572 db Remove extra data on estimate command in joblist for bat.
574 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
575 really change anything, but is the beginning of doing it *right*.
576 To do it completely right the LastWritten date must be passed to
577 the SD, but it is not yet done.
578 kes Minor tweaks to some bat restore SQL.
579 kes This patch fixes bug #1003 where putting the message output from
580 a Verify job into the catalog results in a recursive loop. The problem
581 seems to show up only with postgresql (to be verified).
582 kes Correct %x to %p in postgresql debug statement.
584 kes Fix bug #942 where lots of emails where generated when the heartbeat
585 interval was low and Bacula wanted a different tape from the one in
588 ebl Add new SD despooling attributes and Dir inserting attributes
589 job status codes in the catalog (Status table).
591 ebl Use qmake-qt4 instead of qmake when available (debian system).
593 kes Add a security warning to src/cats/make_catalog_backup.in indicating
594 that passing the password via the command line (arg 3) is insecure.
595 This responds to bug #990 (it doesn't fix it).
597 kes Set default debug_level to zero. This corrects bugs #991 and #993.
598 kes Fix a crash in bat when it cannot connect to the Director for example
599 if the Director is not running.
600 kes Remove redundant INDEX (JobId) from File table in the trunk.
602 kes Make explicit exception to GPL in LICENSE to permit linking
603 the Win32 FD with Microsoft VSS code.
604 kes Apply the Solaris package patch from
605 Masopust, Christian <christian.masopust@siemens.com>
606 kes Apply the patch to optionally add a timestamp in the debug output
607 submitted by Mariusz Czulada <manieq@wp.eu>.
609 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
610 backend (sql_strerror). Fixes bug #989
612 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
613 It applied with no problems.
614 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
616 kes Redirect stderror to stdin on mt status command in mtx-changer.in
617 since the status is returned on stderr on Solaris.
618 kes Activate Close button on tray-monitor window. This fixes
620 kes Check for NULL item in parse_conf.c before calling it. In the
621 case of Device, there is no item and this caused a seg fault when
622 Device appears in the conf file.
623 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
624 avoids pulling in config.h multiple times in some new code.
626 kes Fix spurious warning message printed when creating a volume with
627 a LabelFormat. This fixes bug #976.
629 Release Version 2.2.5
631 kes Add JobId in place of Job name in all the Jmsg() output.
632 kes Correct the APP_DESC for the Win32 storage service (remove an e).
634 kes Make maxvol-test and new more strict maxvol2-test work.
635 kes Print JobId in all Jmsg() job output.
637 kes Add new SD despooling attributes and Dir inserting attributes
638 job status codes. This fixes bug 961.
639 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
641 kes Fix doc issue. This fixes bug #963.
642 kes Fix listing performance problems in bat. Pointed out by
644 kes Remove old debug code.
645 kes Fix bat code that tests for Win32. This should fix bug #968
646 kes Query 5 list wrong Vol after migration. This fixes bug #960
648 ebl Fix #969 where user can't change Replace option in restore menu.
650 kes Save jcr in thread specific data (tsd) for each thread.
651 kes Make Dmsg() print JobId as -%u.
652 kes Make Jmsg, Emsg, and others automatically pickup the jobid
653 for the thread if it exists.
654 kes Remove old reservation debug jid code.
655 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
656 ebl Add an option that permit to specify spool size in job
657 definition. (Applying patches/testing/spoolsize_per_job.patch).
658 You must upgrade SD and DIR at the same time.
659 dvl Add new configuration item --archivedir
660 dvl Adjust regression tests to use tmp not /tmp. This will allow
661 multiple concurrent runs of the regression tests.
663 kes Fix race condition that drops final block written to volume.
664 This happens in rare cases with multiple simultaneous jobs
665 when the Volume fills. This fixes bug #964. May be related
666 to bug #935 and possibly #903.
667 kes Eliminate more strerror() and replace with bstrerror().
668 kes Remove BSD getopt and replace with unrestricted IBM version.
669 kes Fix Win32 build for changed calling sequences.
670 kes More tweaks to the mount volume routines to get everything
671 right. Changed variable name from find to have_vol, which is
672 much easier to understand.
673 kes Enhance btimer debug code.
675 kes Fix FD->SD authorization failure, which was due to spurious
676 wakeups from a pthread_cond_timedwait(). Simply check the
677 predicate before continuing. This fixes bug #953.
678 kes Add const char where needed (more to do). Remove temp debug code.
680 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
681 kes Don't overwrite error message in check_tables_version.
683 kes Unlock batch insert tables with same calls used elsewhere.
684 kes Allow starting 59 jobs a second.
685 kes Make SD session key more random.
686 kes Add retry for SQLite opening db if it fails. Probably helps
688 kes Suppress extra error messages during batch insert failure.
690 kes Add jcr to timer packets so if killed message can be sent to job.
691 kes Add JobId to all Dmsg() output.
692 kes Put some FD auth code on dbglvl rather than fixed.
693 kes Return insert attributes error message in db msg buffer to avoid
694 false error messages. Helps fix bug #966.
695 kes Separate batch init error messages. Probably helps fix bug #966.
696 kes Make SD code that contructs attribute insert check string lengths
698 kes If Dir gets an error during inserting attributes, cancel SD.
699 This reduces unnecessary error messages.
701 kes Correct search boolean for getting Volume info
702 ebl Cleanup batch insert code. Probably fixes bug #965.
703 kes Back out one small change to the reservation system (reserving a volume).
704 kes Rework how a Volume is mounted. It is now much more intelligent and
705 will always attempt to use any mounted volume if possible and reduces
706 calls to the Director asking about volumes.
708 kes Turn off some code when batch insert not enabled.
709 kes Edit FD name in connect error messages.
710 kes Rework the reservation system to take into account that the Director
711 might give us a Volume that is different from the current one being
712 used, and to ensure that we don't exceed Maximum Volume Jobs.
713 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
714 fatal error with multiple jobs running'
715 kes Add more debug code in reservation system.
716 kes Implement maxvol-test to check bug #947.
718 kes Add code to handle tray monitor separated from Win32 FD.
719 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
721 kes Add missed return in fixing verify bug -- trunk only.
722 ebl Fix a command parser issue causing a director segfault.
723 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
725 kes Increase the max block size to 4MB fixes bug #957.
726 kes ERABT if user sets min block size > max block size. Fixes bug #956.
727 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
728 is not properly mounted (recognized) during a poll.
729 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
730 Job that has differences reports Verify OK.
731 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
733 ebl Add an option to operate on all pools with update vol parameters.
734 This complete the project 20. Patch from Nigel Stepp.
735 ebl Add history support to bconsole when using readline.
736 Using Ctrl-D to exit doesn't update .bconsole_history
737 kes Modify new volume algorithm to use max MediaId for generating next
738 volume number rather than the count of Volumes. This should essentially
739 eliminate the failure rate if some volumes were deleted. Bug #921.
740 kes Begin implemention of Optimize Job Scheduling.
741 kes Implement restore callback that Dirk and I agreed on for bat
742 restore. This fixes bug #928. Restore of backup of zero files fails.
743 kes Fix SQL Catalog logging which broke with new db_escape_string
746 Release Version 2.2.4
748 kes Fix bacula_cats.def for new db_escape_string().
749 kes Increase size of name string when FD making connection to SD.
750 May fix bug #953. FD->SD connection failure.
752 kes Add code to help Dan debug 2drive-incremental-2disk test.
753 kes Add code to try to fix bug #908.
754 kes Add waits to multiple exit detection code to try to force pid
755 file to always be deleted.
756 kes Restore good dev.tar.gz to rescue set appropriate binary property.
758 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
759 trying to switch drives by checking for blocking before unblocking.
761 kes Cancel storage daemon in all cases where FD reports error. This
762 should fix virtually all cases of bug #920.
763 kes Fix db_escape_string() for MySQL which did not compile.
765 kes Fix error message that was clobbered when Dir tells SD it does not
766 have write permission on Volume. This should fix a minor point
767 in bug #942, but not the main problem.
768 kes Add code to cancel job in SD if FD connection fails. This should
770 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
771 dvl Pass jcr and db into db_escape_string() to enable better escaping
773 kes Fix migration code to get correct Volume name with multiple volumes
774 by skipping |. Fixes bug #936.
775 kes Implement patch supplied by Landon to fix bug #944 where using
776 TLS with bconsole uses 99+% of the CPU.
777 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
779 kes Move patches into patches directory.
781 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
784 ebl Using 'm' in bconsole will show messages like before,
785 and not memory usage.
786 kes Fix bug #935, and probably also bug #903 where files were not
787 restored. MediaId was not properly set in JobMedia record after
790 kes Suppress chown and chmod error messages if the FD is not running
793 kes Apply Martin Simmons' patch that should turn off the new API usage
794 when batch insert is turned off allowing building on older
796 kes Add ./configure search in qwt-qt4 for qwt package
798 kes Bacula is now free of 3rd party GPL copyrighted code!
800 kes Add guid_to_name.c/h which replace idcache.
801 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
803 ebl Detect if new PosgreSQL batch insert API is present.
804 kes Correct incorrect mempool call causing Director crash. Occurs on
805 systems without va_copy().
806 sb Update spec files for 2.2.1 release
808 kes Fix memory pool call in ua_output.c. bug #934.
809 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
810 Add test program to fnmatch.c
812 kes Integrate patch to README.vc8 from
813 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
814 edit it to get it into Unix patch format.
815 kes Implement mkpath.c to replace old FSF makepath.c
817 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
819 Release Version 2.2.1
821 kes Update POTFILES.in
822 kes Cleanup a few underquoted AC_DEFUNs in configure
823 kes Apply patch from Martin Simmons that adds a test for va_copy to
826 kes Fix bug #921 by increasing the number of tries to create a new volume
828 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
829 can be called multiple times. Implement a version for machines
830 without va_copy() that gets a big buffer.
832 kes Integrate more portable zone offset code into bsmtp.c
833 Submitted by Attila Fülöp.
835 kes Fix bad SD->FD return status reported by
836 (James Harper) <james.harper@bendigoit.com.au>
837 ebl Fix a bug in read_close_session which return random status
838 thanks to James Harper
840 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
841 and directory names during restore of single file/directories.
842 kes Add sanity checks to .sql command when string is empty. Hopefully
843 that will resolve Dirks Director crash.
845 kes Apply patch submitted by Martin Simmons that corrects a seg fault
846 in the bsmtp chat subroutine when debug is >= 10.
848 kes Fix Director crash when running bat SQL queries.
849 kes Add David's notes on Item 8: Copy pools.
851 kes Rework projects file to be current and ready for a vote.
852 kes Enhance lex scanner error message.
854 kes Tweak LICENSE file to mention BSD code.
855 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
856 if specified on the ./configure.
857 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
858 This class is intended to allow us to open a second bsock to the
859 Director while in the restore subdialog.
861 kes Fix configure to create bat Makefile before creating dependencies.
862 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
863 kes Add a tooltip to the tray monitor.
864 dvl Set the Director's PID file before dropping privs. This fixes
867 kes Update AUTHORs file
868 kes Increase the default max concurrent jobs to 20 in FD and SD to
869 correspond with the default .conf files.
870 kes Rewrite the Win32 service routines. This eliminates the 3 copies
871 some different, of the same file created by RN when porting the
873 kes Rearrange some of the Win32 directories and the placement of the files
875 kes Set DEVELOPER flag in version.h
877 ========================================================================
878 Release Version 2.2.0
880 kes Apply a second doc patch from Marc.
881 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
882 improves the tips section that discusses how to setup multiple
885 kes Update bat README file.
886 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
887 corrects a typo in the Recycle status check in db_find_next_volume().
888 This will probably fix a number of annoying problems with multiple
890 kes Modify most of dird/msgchan.c to use bsock class calls rather than
891 bnet calls -- no functionality change.
893 kes Modify the Verify output to specify if files are missing on
894 the Volume(s) or disk. Fixes confusion in bug #916.
895 kes When more than one Volume is read in a migration job, the last
896 Volume bytes reported are from the last read volume rather than
897 the last written volume. Fixed. This fixes bug #910.
898 kes Fix display of Recycle flag after update volume=foo recycle=yes.
899 It previously printed New Recyle flag is: no. This fixes bug
902 kes Correct seg fault when switching tape drives during restore.
903 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
904 be used until after 2.2.0 release.
906 kes Remove fnmatch() in SD that permitted wild card specifications.
909 kes Fix %g in filename returned by SQL for browse tree reported by
911 kes Fix configure so that it puts config.out in the cwd rather than
913 kes Attempt to fix the locking problem reported by Eric in bug #906.
914 kes Make berrno class to leave errno unchanged after constructor call.
915 kes Make bnet_server use the heap rather than the stack to allocate
916 its socket fd pointers to avoid a crash at termination. Problem
917 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
919 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
920 and putting it in depkgs-qt along with Qt4.3.
922 kes Rework code in acquire.c that switches drives for reading when
923 the Media Type does not match. This should fix bug #906
925 ebl Fix a director segfault during job setup #907
926 kes Correct seg fault in postgresql when first operation returns no
927 rows. Fixes Dirks File browser problem seg fault with bat.
929 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
930 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
933 kes Implement PopUp YES/NO dialog for bat.
935 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
937 kes Correct RunScript to terminate job in FD on failure.
938 kes Change abort_on_error and AbortJobOnError to fail_on_error
939 and FailJobOnError in RunScripts.
940 kes Minor tweaks of code formating in RunScripts, principally to
941 avoid depassing 80 columns.
943 kes Eliminate one #ifdef Win32 in bsmtp
944 kes Implement grow tool to grow a file for testing very large databases.
945 kes Add big-vol-test to test Bacula seeking with > 5GB.
948 kes Modify find_next_volume() to return all values in Media record.
949 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
953 kes Update Release notes
955 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
956 Warning, in previous beta version, all media get from scratch keep their
959 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
960 This should fix bug #842. Made a note to look at removing the temp
961 files at the end of the install.
962 kes Add ability to mount and unmount a file device providing it is
963 marked as being removable and has the appropriate mount and unmount
964 commands defined in the Device resource. This fixes bug #830.
965 kes When applying a storage override, release all previous storage
966 definitions rather than just prepending the new storage.
967 This should prevent a good deal of confusion.
969 kes Implement ./configure search for qwt libraries.
971 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
972 Win32 FD. This should fix bug #893.
973 kes Remove an unnecessary beep in Win32 init code.
974 kes Update copyright dates in Win32 executable about boxes.
975 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
976 code with a BSD getopt.c and getopt.h.
977 kes Remove sched.h from the Win32 compat directory -- not used.
978 kes Remove the Exit menu item from the Win32 tray monitor. If you really
979 need to shut it down, do it through the services panel or the command
981 kes Remove some inappropriate Bacula FSFE copyrights.
982 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
983 kes Fix regress config non-portable test as pointed out by
984 Florian Heigl <florian.heigl@gmail.com>
985 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
986 as pointed out by Florian Heigl <florian.heigl@gmail.com>
988 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
989 Reported by Frank Sweetser.
993 kes Fix client-only build.
994 kes Integrate client-only fixes for bsys (initgroups) and conio from
995 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
996 kes Make arguments to get_scratch_volume() in same order as other
998 kes Rework the prune_volumes() subroutine so that after purging and
999 no volume found in desired pool, it will check for a scratch
1000 volume. This prevents recycling the whole scratch pool.
1001 kes Add code to status storage to print boffset_t (largefile support).
1003 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1004 kes You now need a --with-qwt=<dir> to be able to build bat.
1005 kes Update src/win32/cats/bacula_cats.def to include the new
1006 db_get_query_dbids() call on Win32.
1008 kes Correct a problem when selecting a scratch volume and moving
1009 it to another pool that lost some columns.
1010 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1011 kes Enhance Autochanger error messages to include Volume and device name.
1012 kes Rework prune_volumes() code to take account of InChanger flag,
1013 and to handle recycling volumes going to the Scratch pool and
1014 current pool because the RecyclePool directive.
1015 kes Implement a better and more efficient db_get_query_dbids() to
1016 handle creating and passing back a list of DBIds.
1020 kes Start work on new more efficient DBId subroutine. First use
1021 will be for recycling volume to Scratch inchanger.
1022 kes Increase number of JobIds in pruning from 1000 to 10000.
1023 This to be replaced by above routine.
1024 kes Begin implementation of building Qt4 on Win32.
1025 kes Correct typo in fix I added for bad TLS shutdown.
1026 kes Pull 2.0.3 patches into patches directory.
1027 kes Update Release notes. Include qt-console in line count.
1028 kes Update Projects file.
1030 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1031 bug in migration code where a job that spanned two volumes
1034 kes Implement new BST_DESPOOLING blocked state. Change from locking
1035 during despooling in SD to blocking. This means that other threads
1036 can work with the device structure, in particular the reservations
1037 system while despooling.
1039 kes Fix return in reservation message queue that missed clearing
1040 the jcr lock (implemented 26Jun07 below).
1041 kes Rename a number of dev methods to make locking function names
1043 kes Document locking in lock.c. Move lock structures to new file
1046 kes Move reservations message lock to lock jcr only this
1048 kes Move main SD locking code into lock.c (new file).
1049 kes Update Win32 build to include lock.c
1053 kes Dirk committed the qwt library code for drawing graphs in bat.
1054 kes Tweak install of qwt so that it is integrated with ./configure.
1056 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1057 out by Eric (my typo).
1058 ebl Fix configure.in to get batch mode enable
1059 kes Return correct string from authenticate.cpp in bat when connecting
1061 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1062 spurious line drops when using TLS.
1063 kes Do not file reparse points when restoring a file that already
1066 kes Implement Windows reparse points -- similar to directories, but
1067 we do not descend into it. This is a first cut. They seem to
1068 be backed up, but restore is not yet tested.
1069 kes Remove restore_blocking in tls code when shutting a socket to leave
1070 it in blocking mode. Hopefully this will fix the encryption bug
1071 reported by Frank Sweetser.
1072 kes When opening a file for backup, tell the OS that we are going to
1073 read it sequentially -- optimization.
1074 kes Change variable names in authenticate_director() to not conflict
1075 with member names in bat. Caused great confusion with compiler,
1078 kes Queue openssl error messages in case of comm problem.
1079 kes Do shutdown() call if socket terminated.
1080 kes Remove some duplicated code in tls.c
1081 kes Move more of the bsock member variables into private and access
1083 kes Add Frank Sweetser's tls-test to the regression suite.
1085 kes Add Swedish sv.po file
1087 kes Don't print clock skew message in FD if less than 3 seconds diff.
1088 kes Add a bit of VSS info to status client.
1089 kes Implement a first cut of Vista VSS, using Win2003 code.
1091 Release: 2.1.20 beta
1093 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1094 loaded tape but uses first drive).
1095 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1096 This was indeed a Win32 issue.
1098 kes Simplify search of autochanger for in-use Volume.
1099 kes Fix exit condition of check for in-use volume. kes Remove
1100 inappropriate my_postgresql_free_result() in db_close()
1102 kes Fix bad return in FD when encryption signature not found.
1103 Probably caused a crash.
1104 kes Inhibit missing encryption signature error messages for
1105 file types where no signature computed.
1106 kes Correct inverted check on autochanger in reservation system.
1107 kes Tweak debug code in autochanger reservation.
1109 kes Add some additional locking in the cats directory in subroutines
1110 that modify packet variables called from batch insert.
1111 kes Rework how dcrs are allocated. new_dcr() can now be called
1112 with an existing pointer, and it will simply clean it up.
1113 This allows the reservation system to test various different
1114 devices, and will permit easy device changes.
1115 kes A bunch of changes all over to handle new new_dcr() calling
1117 kes Work more on the Volume management in the SD. Remember Volumes
1118 for tape drives and for autochangers (even virtual disk changers).
1119 kes When looking at the Volume list to reserve a drive, handle
1120 autochanger names correctly by interating through the changer
1121 devices. Also call the Director to see if a Volume is suitable
1122 for the current job.
1123 kes Fix some bugs in bscan. Make sure all media records are written.
1124 Make sure that valid JobMedia records are written for disk files.
1125 Previously they were completely wrong.
1126 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1127 that the URLs don't change and so that the developers will all
1128 work off the same copy. Rebuild from scrach.
1129 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1131 Release: 2.1.18 beta
1133 kes Fix seg fault in FD from incorrect digest size.
1134 kes Fix argument to non-OpenSSL crypto.c subroutine.
1136 Release: 2.1.16 beta
1138 kes Remove a few malloc()s from the encryption code.
1139 kes Use the class calls to bsock in filed/backup.c and restore.c in
1140 place of the old bnet_xxx code.
1141 kes Implement code that does an on the fly calculation of the
1142 signing digest during restore of encrypted files. It makes
1143 a best guess at the algorithm, and if it is not correct, will
1144 then revert to the old code which reads the file after it is
1146 kes Implement at least one missing crypto stream in stream_to_ascii()
1147 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1148 #877 where a reload with bad syntax causes Dir to exit.
1150 Cut: 2.1.14 beta (not released)
1152 kes Do not free a volume on a tape drive until another volume is
1153 mounted and read, or the autochanger unloads the volume.
1154 This should help the SD re-use volumes that are already mounted,
1155 and should fix bug #886.
1156 kes Apply patch from user brettedgar that allows gnome2-console include
1157 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1158 kes Apply patch from Lucien Weller that fixes day of week calculation
1159 because of DST flag problem. Fixes bug #887.
1161 kes Move find_next_appendable_volume() to after acquiring a valid device
1162 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1164 kes Unable to reproduce bug 872. However added additional testing for
1166 kes Bug #874 resolved by documenting SQLite limitations.
1167 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1168 kes Bug #881 resolved by removing typo in mtx-changer script.
1169 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1170 approval. Added a link to the wiki on the web page, and implemented
1171 a backup from http://paramount.ind.wpi.edu
1173 kes Fix update allfrompool to pass pool name.
1175 kes Convert to pure GPL v2 license.
1176 kes Fix sscanf problems reported by Peter Buschman that caused
1177 a bus error on Solaris.
1178 kes Rework (simplify) the select prompt in bat.
1179 kes Move get_jobid_from_tid() into lib and create a
1181 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1182 should definitely fix the problem of lost error messages in the
1184 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1185 kes Eliminate tcpd.h from the project. Enclose the #include from the
1186 library with extern C ...
1187 kes Add print of signal name when a signal is trapped.
1189 Release: 2.1.12 beta
1191 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1193 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1194 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1195 makes SQLit3 run 30 times faster, though a bit less safe.
1196 kes Implement --with-batch-insert in configure and detection of thread
1197 safe libraries. It is on by default, but turned off if no thread
1198 safe library (e.g. SQLite 2) is available.
1200 kes Fix Bacula PostgreSQL buffer overruns.
1201 kes Do better checking for NULL results returned from PostgreSQL;
1202 implement retry for failed queries; clear results buffer after
1203 failed query. Hopefully this will correct the PostgreSQL failures.
1205 kes Implement algorithm to handle only one appendable volume with
1206 Prefer Mounted Volumes = no.
1207 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1208 returned from a query.
1209 kes Make volume lock recursive.
1210 kes Implement an additional volume reservation algorithm that
1211 starts by considering all reserved volumes then uses the
1212 old brute force algorithm of searching the resources to
1213 find a suitable device.
1214 kes Add new reservations debug code and refine the old code.
1215 kes Update the win32/dll/bacula.defs file.
1217 kes Tweak reservations algorithm to permit a few more cases, i.e.
1218 volume reserved, but on different drive, ...
1219 kes Enhance SD status to include Pool and Media Type for drive in a
1220 more readable format (a bit longer).
1221 kes Fix PostgreSQL double free.
1223 kes Minor refactoring of restore decryption code.
1224 kes Add code to smartall.c to detect double free of a buffer.
1226 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1227 so that bsmtp will create a correct email address (mailbox only).
1228 kes Modify 'memory' command so that the buffers are listed as 'In use'
1229 to avoid confusion with Orphaned buffers.
1230 kes I reworked the OpenSSL include/lib flags to be handled in
1231 the standard Bacula way, which should fix bug #863 concerning
1232 non-standard OpenSSL libraries.
1234 kes Implement Help Browser window for bat.
1235 kes Fix reload bug that reset StorageId to zero.
1237 kes Fix TLS #ifdefing when TLS turned off.
1238 kes Ensure that when labelling a tape with Slot=0 that InChanger
1240 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1242 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1243 add DISTINCT (required by PostgreSQL).
1244 kes Implement BSOCK authenticate_director() method. Eventually will
1245 authenicate all daemons.
1246 kes Move several more functions into the BSOCK class.
1248 kes Add code to tell the OS that we no longer need a cached
1249 file that we were reading. In findlib/bfile.c. Also,
1250 only cache files that we are reading. Thanks to
1251 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1252 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1253 kes Implement script to automatically generate cats and dll .def
1254 files for Win32 dll.
1255 kes Update README.mingw32 to include new .def file generation.
1256 kes Correct typo in UTF-8 error message as reported by:
1257 jhernandez <julianhernandez@gmail.com>
1258 kes Add additional sm_check() code on debug level 1.
1259 kes Set default debug level to 1.
1260 kes Trap SIGABRT in attempt to get traceback.
1262 kes Reduce bat connect timeout from 30 to 15 seconds.
1263 kes More restructuring and implementing BSOCK class in place of
1265 kes Remove a few unnecessary malloc() tests in crypto code.
1266 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1267 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1268 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1270 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1272 kes Fix Verify InitCatalog. The attributes were not pointing to the
1273 correct saved location.
1274 kes Implement message callback so that GUI is sure to get all
1275 daemon messages. Currently displayed in a dialog in bat.
1276 kes Ignore SIGUSR2 (Bacula timer) in bat.
1277 kes Apply regress patch from bug #859 to allow regress to work
1278 with Solaris compiler.
1280 kes Begin adding TLS support to bat.
1281 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1282 clean up lex.c and make it more readable.
1284 kes Move more bnet functions into the BSOCK class.
1285 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1286 kes Complete change of berrno strerror() method to bstrerror()
1288 Release: 2.1.10 beta
1290 kes Cleanup incorrect email addresses in bsmtp.
1291 kes Make bat display initial messages rather than discard them.
1293 kes First cut of adding .mod to the run command.
1294 kes Implement auto display of messages in bat.
1295 kes Enhanced preferences to allow all Bacula output to be
1298 kes Try to make bsmtp date routines more generic.
1299 kes Fixed bug #856 autochanger documentation.
1300 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1301 kes Add new cats entry point so Win32 builds.
1303 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1305 kes Do better checking for the MySQL 64 bit libraries looking for both
1306 .a and .so libraries.
1307 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1308 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1309 kes Require the thread safe version of MySQL during configure. Thanks
1310 to Andre Noll for pointing this out.
1311 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1312 continuing in migration code.
1313 kes Apply implementation of tray-monitor font derived from gnome-console
1314 submitted by Andreas Piesk <a.piesk@gmx.net>
1316 kes Eliminate important memory loss in SQLite
1317 kes Fixed the batch insert MySQL thread specific data that was not
1318 being freed. See cats/mysql.c:db_thread_cleanup().
1319 kes Fix restore before command.
1320 kes Convert old hdr.name to name() in a few places.
1321 kes Implement update jobid command.
1322 kes Return all time_t dates in db_get_job_record()
1323 kes Stop watchdog in SD earlier.
1324 kes Put Pool just after Storage in please mount message.
1325 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1328 kes Update the po files.
1329 kes Fix Verify InitCatalog by making it cache attributes.
1331 kes Change name bacula-bat to bat for man 1 page to correspond to
1333 kes Check for client and store NULL pointers in status command. This
1335 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1336 kes Fix sign extended editing of %p.
1337 kes Clean out a little old #ifdefing in cats/mysql.c
1339 kes If time diff between DIR and FD is more than 600 seconds convert
1340 INFO message to WARNING.
1341 kes Implement heap size display in status for all daemons.
1342 kes Attempt to fix MySQL db open memory loss (not successfull).
1343 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1344 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1345 Query. This looks like a MySQL but but by doing extra releases,
1346 the memory goes away. This should fix bug #847.
1348 kes When backup fails, cancel SD before waiting for sd termination.
1349 kes If SD is waiting for FD to connect during cancel, wake up the
1351 kes Fix fsf code so that errno is correctly reported.
1352 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1354 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1355 so that Bacula doesn't later stumble into a seg fault.
1356 kes Use the term Restore Client in the restore Job report.
1357 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1358 the original job's FileSetId.
1359 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1360 spooling in migration jobs. Not yet tested.
1361 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1362 reading conf file from a pipe. However, do it with open_bpipe()
1363 rather than popen. Not yet tested.
1365 kes Fix an ugly bug where the VolCatBytes were getting updated
1367 kes Implement bconsole memory command that prints current memory
1368 usage, plus smartalloc dump.
1369 kes Clarify some error messages in backup, admin, and migrate.
1370 kes Shrink label dialog to smaller size.
1371 kes Invert Cancel OK buttons on restore to be OK Cancel.
1372 kes More strerror() to bstrerror() conversions.
1374 kes Start implementing bstrerror() in place of strerror().
1375 kes Stripping path -- seems to work.
1377 kes Prevent door and port files from being restored (mostly
1379 kes Free an unreleased buffer in compat code.
1380 kes Change console Job name from *Console* to -Console- to eliminate
1381 Win32 filename problems. Put Win32 path separator when creating
1382 Console file. This fixes bug #846.
1383 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1385 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1387 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1388 to force Win32 error message.
1390 kes First cut strip path. The data should be passed to the FD,
1391 but nothing is done with it yet.
1392 kes Enhance the digest and signature routines in the crypto
1393 library to accept a JCR and to use it to print error messages
1394 so that they will go in the Job report rather than the daemon's
1396 kes Simplify some of the verify signature code.
1397 kes Simplify a few of the alternative returns in the signature
1400 ebl Use only POSIX regex instead of GNU regex in breg.c for
1401 File relocation. It fix broken freebsd compilation.
1402 kes Convert all other Dir files to use new ua class message
1404 kes Tentative fix for missing digest signature in bug 807.
1405 kes Correct handle problem in new win32_ftruncate routine.
1406 kes Convert ua_purge.c and ua_update.c to use new ua class
1407 message routines for bat.
1409 kes Correct incorrect installation of LICENSE in Win32 installer.
1410 kes Display LICENSE at the beginning of the Win32 install.
1411 kes Attempt to correct the need for the png files to be installed
1413 kes Reapply my bat.conf install script in qt-console. I think I
1414 editted bat.pro instead of bat.pro.in and it was lost.
1415 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1416 the /var/lock/subsys for subsysdir. Also corrects typos in the
1419 kes First cut update job.
1420 kes Correct configure to include qmake of src/qt-console directory.
1422 kes Make restore job yes/mod/no print in one command so GUI works.
1423 kes First cut implementing backup and restore client.
1424 kes Correct editing in Verify output that caused a seg fault.
1426 kes Insure that bat.conf is not overwritten during installation.
1427 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1428 while I was implementing migration in March 2006 !
1430 ebl Cleanup file relocation, using char *RegexWhere instead of
1431 char *where + bool where_use_regexp
1432 kes Update some manpages and add bat manpage.
1433 kes Make a first cut at converting bacula.spec.in for bwx-console
1435 kes Apply patch from John Goerzen to add hostname as fourth argument
1436 to make_catalog_backup script.
1437 kes Fix typos I introduced into bsmtp.c
1438 kes Make pm_strxxx() routines handle input of NULL pointer. This
1439 is to protect from NULL pointers returned from SQL databases.
1440 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1441 kes Add more debug to FIFO code -- fix fifo regression test.
1443 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1444 kes Add thread timer to bnet_connect() to break from OS if wait time
1447 kes Update Win32 build to include new files, new symbols, and
1449 kes Implement socket level heartbeat (tcp_keepidle)
1450 ebl Commit File relocation patch
1451 kes Make bat have 'make install' target.
1452 kes Warn during install if old gnome-console binary found.
1453 kes Warn during install if old wx-console binary found.
1454 kes Add -8 option to bsmtp command line to add content type utf-8.
1455 Fixes bug #809. (Character coding problem in bsmtp).
1456 kes If < is found in target (from, to, cc) then do not enclose the
1457 target in < > in bsmtp. Fixes bug #772 (malformed address).
1458 kes When printing certain items in dbcheck, stop after 300000.
1459 Fixes bug #822. (dbcheck loops).
1460 kes Incorrect status in Dir after waiting for mount with poll set.
1463 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1465 kes Print waiting to reserve a device every 5 mins.
1467 kes Don't call close_part in label.c if tape and relabel.
1468 kes Don't free volume if busy in close() -- should help with
1470 ebl Fix #824 RunScript bug (After script could be execute twice)
1471 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1472 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1473 Add a regression script to test RunScript
1475 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1478 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1479 deprecated. No additional bugs will be fixed, and they will be dropped
1480 in a future release (probably 2.4.0).
1481 kes Change name of wx-console to bwx-console to make it more Bacula
1483 kes Change the name of gnome-console to bgnome-console to make it
1486 kes Some time in March, a Feature Request with patch from Jorj Bauer
1487 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1489 The ability for the director to validate a Client (FD) CN against
1490 an arbitrary set of patterns rather than the hostname, with
1491 A new 'TLS Allowed CN' set of directives which are implemented
1492 in the Client resource. Then pattern matching is used in place
1493 of hostname matching against the Certificate's CN. As an example, we
1494 have certificates which (a) use a local CA, and (b) have a CN of the
1496 kes Add new/changed entry points to Win32 build
1497 kes Create unaccepted-projects for projects that are not accepted.
1498 kes Simplify locking in the reservations system.
1499 kes Add more debug code in reservations.
1500 kes Make sure error condition on reserving a volume is handled correctly.
1501 kes Correct handling of volume_in_use.
1502 kes Correct handling of initializing a device.
1503 kes Move handling of broadcasting releasing a device into release_device().
1504 kes Correct attaching dcr to dev so that it is only done if device
1505 is properly initiated.
1507 kes Locking debug level tweaks in SD.
1508 kes Tweak new Volume code.
1510 kes Add exec external-command [wait-seconds] to bconsole. This
1511 executes the external-command. Note! normally external-command
1512 should be enclosed in double quotes.
1513 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1514 it should normally be off in a production system.
1516 kes Implement die command for SD so that we can force it to dump.
1517 kes Implement SD lock debug code.
1518 kes Implement new algorithm for keeping Volume list in SD. It
1519 is now owned by the device.
1521 kes Implement new code for freeing in use volumes that should
1522 resolve if not all, some of the problems of multiple drive
1523 tape conflicts described in bug 801.
1525 kes Fix gui/bacula-web/images files in svn.
1526 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1528 ebl Fix a bug in batch mode (in string escape)
1529 kes Correct migration prune SQL typo that crept in in a
1530 recent 2.1.x change.
1532 kes Move bnet_despool() into class in bsock.c
1533 kes Modify job report to include director name and Build OS.
1534 kes Move drop root privilege and check_catalog() before fork.
1535 kes Add update database scripts (version 9 to 10) to updatedb directory.
1537 ebl Check size and age of each file after its backup to see if
1538 it has changed during backup, if 'checkfilechanges' is set.
1539 The FD will do an extra check (stat(2)) after
1540 each file backup. mtime, ctime and size are compared with
1541 'before backup' information. If time or size mismatch, an
1542 error message will be generated. You must upgrade FD to use it.
1544 kes Make database name and user configurable
1545 --with-db-name=xxx --with-db-user=xxx
1546 kes Add back database type to message.c for debugging.
1548 kes Implement dir_sql() which issues an SQL query.
1549 kes Modify bat medialist to use dir_sql() and do some minor C++
1550 formatting as well as eliminating a number of pointers, simplifing
1553 kes Fix some of the mtx-changer grep commands for tape label readers.
1554 kes Convert a number of bsendmsg into the appropriate send/warning/error
1555 message class calls.
1556 kes Suppress the using database message in the .sql command.
1557 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1559 kes Add context menu for floating a window.
1560 kes Some minor cleanup and name changes in qt-console
1561 kes Add doing mt setblk 0 in Win32 mtx-changer.
1562 kes Apply Martin's bug fix to move definition of ENODATA for
1564 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1565 sqlite2 and sqlite3.
1567 kes More pruning cleanup.
1568 kes Turn on wait_for_drive by default in mtx-changer.
1569 kes Turn on Batch insert code by default as it now passes regression.
1570 kes Add ./configure --enable-bat to enable building of Bat.
1571 No install yet though.
1573 kes Implement a new .sql command for bat.
1574 kes Implement code to turn off pruning in obtaining the next volume.
1575 Pruning is turned off for the status dir command, but turned on
1576 for SD requests and for the list nextvolume command.
1578 kes Correct Qmsg() that was not updated correctly when committing a
1579 previous change (probably the recent TLS patch).
1581 kes Write new subroutine is_volume_purged() that explicitly checks
1582 if the Volume is purged, and if so marks it as such. This should
1583 resolve problems reported about needing to mount twice to recycle
1585 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1586 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1587 amount of duplicated code.
1588 kes Do volume pruning only for the Media Type desired (reduces pruning time
1589 if multiple Media Types are in the same pool).
1590 kes Implement more detailed info in the Job report for the Bacula version
1592 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1594 ebl Add bbatch tool to bench database and insert mode.
1595 Fix sql quote stuff in batch mode
1596 Fix sql stuff for mysql
1598 kes Correct problems with am/pm scheduling. Fixes bug #808.
1599 kes Implement new prunning code that prunes up to 1000 jobs at
1600 the same time. The same technique can be applied to a number
1601 of other prune/purge subroutines.
1602 kes Add an insanity check when starting a new tape job to ensure
1603 that the tape position has not been changed. If so fail the
1605 kes Fix Win32 build for dlls to add the folllowing:
1606 src/lib/bsock.c -- new file with new entry points
1607 src/lib/dlist.c -- new entry points
1608 src/cats/sql_create.c -- new entry point
1609 src/cats/sql_cmds.c -- new DATA item exported
1611 ebl batch mode cleanup bscan-test is ok now.
1612 kes Implement SD code to check length of disk volume before appending.
1614 kes Correct return status on db_batch... routines.
1615 kes Add call to db_write_batch_file_records() to migration code.
1616 ebl Fix AfterJob timing
1617 kes Move the checking of the database in initializion of the Director
1618 to after we drop privileges. This avoids the need for both root
1619 and bacula access to the DB.
1620 kes Correct a misplaced variable definition in src/filed/backup.c
1621 kes Correct how the new batch insert db_create_attributes_record()
1622 uses the arguments. Caused a seg fault in bscan.
1623 kes Implement lock() and unlock() methods in DEVICE class.
1624 Implement block() and set_block(xx) methods in DEVICE class.
1625 kes Modify bnet_connect() so that it uses time() to check for the
1626 wait time expiring (on some OSes, some system calls may not
1627 return immediately).
1628 kes Modify Verify to obtain the previous JobId when it is actually
1629 running rather than at schedule time (as it was in 1.38.x).
1630 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1632 kes When checking pid in pid file, continue running if the pid is
1633 the same as ours. This occurs on IRIX after a system crash.
1636 kes Extend new GUI API.
1637 kes Make the ua structure a class, and implement send_msg(),
1638 error_msg(), warning_msg(), and info_msg().
1640 kes Apply fix from for building wx-console on the Mac from
1642 kes Implement new select mechanism for GUI programs.
1643 kes Reorganize initialization of stackedWidgets in bat.
1645 kes Add updated nagios plugin supplied by Christian Masopust.
1647 kes More bat implementation.
1648 kes File migrate bug with Pool Occupancy using mediaid instead
1649 of jobids. Fixes bug #795.
1650 kes Fix orphaned buffers in filed backup and verify due to
1651 crypto buffers not freed during errors. Fixes bug #789.
1652 kes Extend new GUI api code to tree commands.
1653 kes Ensure that tree and dot commands check console ACLs.
1654 kes Permit marking directory with trailing slash.
1655 kes Allow 20 console connections (instead of only 10).
1657 kes Add smartctl call to bacula-sd.conf as an example of getting
1660 kes Modify jobq.c to let simultaneous restore jobs run. This may
1661 cause them to fail if they cannot get a drive.
1662 kes Add Client Connect Wait to Storage daemon to permit users to
1663 modify the time the SD waits for a FD connection.
1665 kes Correct virtual changer check which was backwards. This caused
1666 volumes to be unloaded into slots already occupied.
1668 kes Apply Command ACL filter to JobId list in restore command.
1669 kes Correct typeo in var.c patch.
1671 kes Don't let Bacula prune File or Job records for the current Job.
1672 kes Fix variable substitution pad + inc bug reported (with patch)
1675 kes Correct SQLite log table index as reported by Luca Berra.
1677 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1679 kes Begin implementing new comm signals for API.
1680 kes Fix a few places in lib/message.c where the open fd may
1682 kes Continue implementing lib/bsock.c (real class). Make jcr,
1683 who, host, and port private. There are new methods to access
1684 them for non-class use. This required touching a number of files.
1686 kes Add LANG=C to autoconf/randpass so it works with languages other
1687 than English. Fixes bug #788.
1689 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1691 You will not be able to generate Include/Exclude list any more.
1692 It will be fixed soon.
1693 If you want to use this, you can apply
1694 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1696 kes Restore of sockets created false error messages because Bacula
1697 no longer restores sockets, but the code was still trying to
1698 set the attributes on a non-existent file. Reported by a user.
1699 ebl finish RecyclePool feature
1700 Media will takes Pool.RecyclePool
1701 when moving from Scratch to a Pool or when user will do
1702 update volume=xxx frompool
1703 To use it, add RecyclePool = aPool to your Pool resource
1706 RecyclePool = Scratch
1710 kes Expand new BSOCK class adding signal() and new BNET signals.
1711 kes Begin enhancing the dot commands adding a new API function
1712 that returns more information and will make it easier
1713 to interface to the Director from a program.
1715 kes Make DEVICE fd private. Its new name is m_fd, and can be
1716 obtained with dev->fd() outside the class. This is the
1717 first of many DEVICE members to be made private.
1718 kes Implement Michael Renner's idea on having a virtual disk
1719 changer. I made some minor modifications (e.g. I did not
1720 implement the Virtual Changer directive, but simply set
1721 the Changer Command to an empty string.
1723 kes Implement a BSOCK send() method that writes the whole record
1724 in a single write() request rather than in two.
1725 ebl add update volume=xxx recyclepool=yyyy
1726 volume takes recyclepool from pool when using update volume=xxx from pool
1728 kes Fix encryption deblocking bug, which caused some restored files
1729 to be truncated. This fixes bug #763.
1730 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1731 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1733 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1734 ebl Use btime_t instead of uint64_t in media patch.
1736 kes Optimize the use of the database a bit in the Status dir command.
1737 Only open it when needed, ensure that if any previous database
1738 was opened, it is closed.
1740 kes Correct VolCatBytes bug from media patch.
1741 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1742 in the case of orphaned records.
1743 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1744 and File records in 300K chunks to be more efficient. This
1745 idea came from Juan Luis Frances (if I remember right).
1746 kes Apply Eric's scratch patch that moves a purged Volume to
1747 the RecyclePool. Question: how is RecyclePool set? what
1748 happens to the ScratchPool?
1749 kes Apply Eric's media patch that collects read/write media
1750 times as well as byte counts. This patch requires a
1751 simultaneous upgrade of the DIR and SD. Note, there
1752 should be some way to turn off timing. I'm not sure
1753 times are in Bacula units.
1754 kes Apply Eric's batch-insert patch.
1756 kes Update projects list.
1758 kes Implement Include/Exclude file lists in FD as dlists using
1759 the new dlistString class. This permits efficiently having
1760 large include/exclude lists and completes project Item 25.
1761 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1762 console is authorized to cancel the job. This fixes bug
1764 kes Modify SD so that the VolCatJobs medium record is updated
1765 at the beginning of a Job rather than the end. This
1766 fixes bug #775 where exceeding MaxVolJobs caused jobs
1768 kes Added a mutex around getting and setting Volume information
1769 so that multiple simultaneous jobs will single thread.
1771 Switch to using Subversion
1772 kes Remove src/pygtk-console/ from configure
1774 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1775 plus the entrypoints.
1776 kes Apply patch supplied that corrects debug print
1777 in canceling jobs for max run time. Supplied as
1778 part of bug #621, which was previously fixed.
1780 kes Test on job_canceled() and sd_msg_thread_done inside
1781 loop starting the message thread to avoid a race condition.
1783 kes Remove rl_catch_signal from console.c as it conflicted
1784 with the header definition. Fixes bug #765.
1785 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1787 kes Clarify some stored/acquire messages to indicate if the
1788 problem is with read or append.
1790 kes Fix memory leak with storage ids in cats/sql_get.c
1791 kes Terminate watchdog earlier to avoid reference to released
1792 memory -- reported by Jason Austin.
1793 kes Move closing the database from jobq.c to the director daemon
1794 termination routine. This fixes memory leaks for shadow jobs
1795 (i.e. migration jobs).
1796 kes Free up the unique jobid chain items in migrate.c. This fixes
1797 a memory leak problem.
1798 kes Convert some ugly looking for statements to use foreach_alist
1799 in findlib/find.c. This will facilitate converting the structures
1800 to use dlist (for large include/exclude lists).
1801 kes Fix a bug in the btree.c and btree.h routines, then rename them
1802 rblist and add them to be built in src/lib. Include some new
1803 methods written by Rudolf Cejka that make the code more readable
1804 (hides some of the ugly casting).
1805 kes Add set_next() and set_prev() methods which make the code much more
1806 readable. Also add a new dlistString class that facilitates storing
1807 strings in dlists. To be used in the large include/exclude lists.
1808 kes Make some trivial modifications to lib/tree.h that use rblist
1809 rather than dlist for storing the tree links. This was suggested
1810 by Rudolf Cejka. The result of this is that the restore tree now
1811 uses red-black binary trees rather than simple linked lists. This
1812 should give rather dramatic speed improvements for directories
1813 contining large numbers of directories/files (more than 10000).
1815 kes Fix maxruntime bug #621.
1817 ebl Implement the include JobID in spool file name project.
1818 kes Reorder projects file in order determined by Jan 2007 vote.
1819 kes Implement item #12 on project list -- quick release of FD by
1821 kes Fix open of SQLite3 db where user does not have write permission
1822 so that DIR does not crash. Fixes bug #761.
1824 kes Add back missing @ in Win32 Makefile.
1825 kes Change 'Device not configured to autolabel' from INFO
1827 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1828 which should restart an indefinite # of times.
1829 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1830 other DIR specifications.
1832 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1833 Fix path quoting in SQLite scripts.
1834 Fix problems with SHGetFolderPath.
1836 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1838 kes Fix Job restart on error bug that promotes an Inc to a Full
1839 backup. This should fix bug #755.
1840 kes Add qt-console and first cut of code.
1844 kes Fix Bacula->Documentation link on Win32 to point to index.html
1845 instead of bacula.html. Fixed bug #750.
1846 kes Return JobId in db_get_job_record() when JobId==0. This should
1848 kes Do not release source pointers when restarting a failed job.
1850 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1851 This *should* fix bug #747.
1852 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1855 kes Modify USTORE constructor to set an empty store_source string,
1856 and don't copy the store_source string in a cancel. Hopefully
1857 this will fix Arno's seg fault, bug #744.
1858 kes Add back code to disable conio in configure. Fixes bug #743.
1859 kes Correct the Options scanner in the FD to correctly handle
1860 SHA1 option, which was eating the next option. Reported by
1862 kes Add code to indicate when the SD is spooling, spool wait, and
1863 despooling as requested by Alan Brown.
1865 Version 2.0.0 released: 4 January 2007