1 Technical notes on version 2.3
5 kes Move initialization of read/write res lock earlier in the code.
6 This fixes the crash with a null conf file. This fixes bug
8 kes Redefine CURES in lib/parse_conf to be URES and move it all
9 into lib/parse_conf.c -- this responds to bug #1042, but does
10 not fix it. The fix is not to compile with FORTIFY_SOURCE.
11 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
12 the trunk SVN. I don't think this was reported as a bug.
14 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
16 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
18 kes Add DataDespooling and DataCommitting status (committing is
20 kes Finish implementation of new reservations code noted below.
22 kes Fix bsnprintf for float point numbers. I broke recently when
23 parameterizing some variables. This fixes bug #1036.
24 kes Undo recent reservations changes ... will apply them later
25 when they work better.
27 ebl Fixes #1034 which cause mysql to hang the connection after 8h
28 ebl Change default statistics target of filename.name and path.path
29 fields for PostgreSQL. This speeds lookup by indexes. Thanks
31 kes A few more tweaks to new reservation code. Make sure to clear
32 vol released flag when retaking volume. When reading label and
33 label is bad mark volume unused. When recycling, mark volume
34 unused so it can be renamed.
36 kes Fix reserve_volume() so it doesn't release a volume in use
37 (i.e. a volume entry not marked released). This should be
38 the last part needed to fix bug #1018.
40 kes Move Heartbeat documentation from Job to Director resource.
43 kes Fix existing switch drive SD code to call autochanger to release
44 any old volume. This must be done to keep the autochanger from
45 releasing subsequently newly reserved volumes in doing a close().
46 This should fix bug #1018.
47 kes Fail if attempting to get console input in batch mode. This
48 should help fail RunScript console commands that are incomplete.
49 kes First cut implementing switch_drive() in SD (not actually called).
51 kes Implement first cut running console commands in a RunScript.
53 ebl Fixes bug #1028 where "Selection Type" option was not usable
55 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
60 kes Add new free_tls() entry point so that Win32 builds.
61 kes Fix compile warning in src/lib/util.c
62 kes Fix entry point for edit_job_codes() so that Win32 builds.
63 kes Fix seg fault Frank Sweetser reports in regression testing
64 on his systems. The problem was that the original author of
65 bsnprintf.c did not take into account the side effects of
66 using ++x in the argument to a #define.
67 kes Make SD protocol backward compatible with version 2.2.x.
69 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
70 because Bacula no longer restores sockets.
71 ebl Always use ignorecase fileset option on win32 FD.
73 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
74 that implements double quoting include names in conf files,
75 and also allows piping input by having the first character
76 be a vertical bar (|).
77 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
78 that implement %f in RunScripts to pass the FileSet name.
79 kes Skip leading | when lex input comes from a pipe as suggested
80 by Michael Stapelberg <michael@stapelberg.de>.
82 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
83 Nerijus Baliunas <nerijus@users.sourceforge.net>
85 kes Implement Plugin Directory and plugin events.
87 kes Implement a security enhancement: TLS authentication but no
88 encryption. Enabled by setting 'TLS Authentication = yes'.
89 Note when this is on, TLS encryption is turned OFF!
91 kes This patch corrects a problem where the maximum concurrent storage
92 jobs counter gets out of sync during restore jobs causing jobs to
93 'wait on max Storage jobs'. This patch fixes bug #1009.
95 kes This patch fixes bcopy so that it produces correct Volumes.
97 kes This patch eliminates spurious output to the console during a VerifyVolume
98 job that contains encrypted data. It fixes bug #1024.
100 kes This patch prevents the 'status dir' command from trying to use a scratch
101 volume and possibly moving it from one pool to another. This patch fixes
104 kes Add new include to postgresql.c suggested by Marc Cousins so
105 that it compiles correctly with pgre version 8.3.
107 kes Fix --archivedir addition to configure. Replace it with
108 --with-archivedir in configure.in This fixes the regression
110 kes This patch fixes bug #1012 where the job is canceled because
111 of Max Run Time exceeded when the job has not yet started.
113 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
114 one 'part' to write. Instead of each part being stored on disk,
115 written to DVD, then deleted from disk, all parts are written to disk,
116 and only the last is written and deleted from disk.
117 kes This patch fixes the status command to include the formating string for
118 JS_AttrInsterting. It fixes bug #1021.
119 kes This patch should fix the Mac OS X build problem on the latest
120 Darwin, where sys/types.h was not included correctly (apparently
121 due to a change in the Mac headers). The solution was to explicitly
122 ensure that it is defined for the ./configure.
123 This patch also has a rebuild of configure that includes the Debian
124 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
125 kes This patch should ensure that queued messages to the console are
126 displayed as soon as possible. It should fix bug 1007, but has been
127 reported not to work.
129 kes This patch fixes the infinite loop when trying to increase the
130 maximum number of volumes in a Pool during the add command.
131 This patch fixes bug #1008.
133 Release Version 2.2.6
135 db Remove extra data on estimate command in joblist for bat.
137 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
138 really change anything, but is the beginning of doing it *right*.
139 To do it completely right the LastWritten date must be passed to
140 the SD, but it is not yet done.
141 kes Minor tweaks to some bat restore SQL.
142 kes This patch fixes bug #1003 where putting the message output from
143 a Verify job into the catalog results in a recursive loop. The problem
144 seems to show up only with postgresql (to be verified).
145 kes Correct %x to %p in postgresql debug statement.
147 kes Fix bug #942 where lots of emails where generated when the heartbeat
148 interval was low and Bacula wanted a different tape from the one in
151 ebl Add new SD despooling attributes and Dir inserting attributes
152 job status codes in the catalog (Status table).
154 ebl Use qmake-qt4 instead of qmake when available (debian system).
156 kes Add a security warning to src/cats/make_catalog_backup.in indicating
157 that passing the password via the command line (arg 3) is insecure.
158 This responds to bug #990 (it doesn't fix it).
160 kes Set default debug_level to zero. This corrects bugs #991 and #993.
161 kes Fix a crash in bat when it cannot connect to the Director for example
162 if the Director is not running.
163 kes Remove redundant INDEX (JobId) from File table in the trunk.
165 kes Make explicit exception to GPL in LICENSE to permit linking
166 the Win32 FD with Microsoft VSS code.
167 kes Apply the Solaris package patch from
168 Masopust, Christian <christian.masopust@siemens.com>
169 kes Apply the patch to optionally add a timestamp in the debug output
170 submitted by Mariusz Czulada <manieq@wp.eu>.
172 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
173 backend (sql_strerror). Fixes bug #989
175 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
176 It applied with no problems.
177 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
179 kes Redirect stderror to stdin on mt status command in mtx-changer.in
180 since the status is returned on stderr on Solaris.
181 kes Activate Close button on tray-monitor window. This fixes
183 kes Check for NULL item in parse_conf.c before calling it. In the
184 case of Device, there is no item and this caused a seg fault when
185 Device appears in the conf file.
186 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
187 avoids pulling in config.h multiple times in some new code.
189 kes Fix spurious warning message printed when creating a volume with
190 a LabelFormat. This fixes bug #976.
192 Release Version 2.2.5
194 kes Add JobId in place of Job name in all the Jmsg() output.
195 kes Correct the APP_DESC for the Win32 storage service (remove an e).
197 kes Make maxvol-test and new more strict maxvol2-test work.
198 kes Print JobId in all Jmsg() job output.
200 kes Add new SD despooling attributes and Dir inserting attributes
201 job status codes. This fixes bug 961.
202 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
204 kes Fix doc issue. This fixes bug #963.
205 kes Fix listing performance problems in bat. Pointed out by
207 kes Remove old debug code.
208 kes Fix bat code that tests for Win32. This should fix bug #968
209 kes Query 5 list wrong Vol after migration. This fixes bug #960
211 ebl Fix #969 where user can't change Replace option in restore menu.
213 kes Save jcr in thread specific data (tsd) for each thread.
214 kes Make Dmsg() print JobId as -%u.
215 kes Make Jmsg, Emsg, and others automatically pickup the jobid
216 for the thread if it exists.
217 kes Remove old reservation debug jid code.
218 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
219 ebl Add an option that permit to specify spool size in job
220 definition. (Applying patches/testing/spoolsize_per_job.patch).
221 You must upgrade SD and DIR at the same time.
222 dvl Add new configuration item --archivedir
223 dvl Adjust regression tests to use tmp not /tmp. This will allow
224 multiple concurrent runs of the regression tests.
226 kes Fix race condition that drops final block written to volume.
227 This happens in rare cases with multiple simultaneous jobs
228 when the Volume fills. This fixes bug #964. May be related
229 to bug #935 and possibly #903.
230 kes Eliminate more strerror() and replace with bstrerror().
231 kes Remove BSD getopt and replace with unrestricted IBM version.
232 kes Fix Win32 build for changed calling sequences.
233 kes More tweaks to the mount volume routines to get everything
234 right. Changed variable name from find to have_vol, which is
235 much easier to understand.
236 kes Enhance btimer debug code.
238 kes Fix FD->SD authorization failure, which was due to spurious
239 wakeups from a pthread_cond_timedwait(). Simply check the
240 predicate before continuing. This fixes bug #953.
241 kes Add const char where needed (more to do). Remove temp debug code.
243 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
244 kes Don't overwrite error message in check_tables_version.
246 kes Unlock batch insert tables with same calls used elsewhere.
247 kes Allow starting 59 jobs a second.
248 kes Make SD session key more random.
249 kes Add retry for SQLite opening db if it fails. Probably helps
251 kes Suppress extra error messages during batch insert failure.
253 kes Add jcr to timer packets so if killed message can be sent to job.
254 kes Add JobId to all Dmsg() output.
255 kes Put some FD auth code on dbglvl rather than fixed.
256 kes Return insert attributes error message in db msg buffer to avoid
257 false error messages. Helps fix bug #966.
258 kes Separate batch init error messages. Probably helps fix bug #966.
259 kes Make SD code that contructs attribute insert check string lengths
261 kes If Dir gets an error during inserting attributes, cancel SD.
262 This reduces unnecessary error messages.
264 kes Correct search boolean for getting Volume info
265 ebl Cleanup batch insert code. Probably fixes bug #965.
266 kes Back out one small change to the reservation system (reserving a volume).
267 kes Rework how a Volume is mounted. It is now much more intelligent and
268 will always attempt to use any mounted volume if possible and reduces
269 calls to the Director asking about volumes.
271 kes Turn off some code when batch insert not enabled.
272 kes Edit FD name in connect error messages.
273 kes Rework the reservation system to take into account that the Director
274 might give us a Volume that is different from the current one being
275 used, and to ensure that we don't exceed Maximum Volume Jobs.
276 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
277 fatal error with multiple jobs running'
278 kes Add more debug code in reservation system.
279 kes Implement maxvol-test to check bug #947.
281 kes Add code to handle tray monitor separated from Win32 FD.
282 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
284 kes Add missed return in fixing verify bug -- trunk only.
285 ebl Fix a command parser issue causing a director segfault.
286 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
288 kes Increase the max block size to 4MB fixes bug #957.
289 kes ERABT if user sets min block size > max block size. Fixes bug #956.
290 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
291 is not properly mounted (recognized) during a poll.
292 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
293 Job that has differences reports Verify OK.
294 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
296 ebl Add an option to operate on all pools with update vol parameters.
297 This complete the project 20. Patch from Nigel Stepp.
298 ebl Add history support to bconsole when using readline.
299 Using Ctrl-D to exit doesn't update .bconsole_history
300 kes Modify new volume algorithm to use max MediaId for generating next
301 volume number rather than the count of Volumes. This should essentially
302 eliminate the failure rate if some volumes were deleted. Bug #921.
303 kes Begin implemention of Optimize Job Scheduling.
304 kes Implement restore callback that Dirk and I agreed on for bat
305 restore. This fixes bug #928. Restore of backup of zero files fails.
306 kes Fix SQL Catalog logging which broke with new db_escape_string
309 Release Version 2.2.4
311 kes Fix bacula_cats.def for new db_escape_string().
312 kes Increase size of name string when FD making connection to SD.
313 May fix bug #953. FD->SD connection failure.
315 kes Add code to help Dan debug 2drive-incremental-2disk test.
316 kes Add code to try to fix bug #908.
317 kes Add waits to multiple exit detection code to try to force pid
318 file to always be deleted.
319 kes Restore good dev.tar.gz to rescue set appropriate binary property.
321 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
322 trying to switch drives by checking for blocking before unblocking.
324 kes Cancel storage daemon in all cases where FD reports error. This
325 should fix virtually all cases of bug #920.
326 kes Fix db_escape_string() for MySQL which did not compile.
328 kes Fix error message that was clobbered when Dir tells SD it does not
329 have write permission on Volume. This should fix a minor point
330 in bug #942, but not the main problem.
331 kes Add code to cancel job in SD if FD connection fails. This should
333 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
334 dvl Pass jcr and db into db_escape_string() to enable better escaping
336 kes Fix migration code to get correct Volume name with multiple volumes
337 by skipping |. Fixes bug #936.
338 kes Implement patch supplied by Landon to fix bug #944 where using
339 TLS with bconsole uses 99+% of the CPU.
340 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
342 kes Move patches into patches directory.
344 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
347 ebl Using 'm' in bconsole will show messages like before,
348 and not memory usage.
349 kes Fix bug #935, and probably also bug #903 where files were not
350 restored. MediaId was not properly set in JobMedia record after
353 kes Suppress chown and chmod error messages if the FD is not running
356 kes Apply Martin Simmons' patch that should turn off the new API usage
357 when batch insert is turned off allowing building on older
359 kes Add ./configure search in qwt-qt4 for qwt package
361 kes Bacula is now free of 3rd party GPL copyrighted code!
363 kes Add guid_to_name.c/h which replace idcache.
364 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
366 ebl Detect if new PosgreSQL batch insert API is present.
367 kes Correct incorrect mempool call causing Director crash. Occurs on
368 systems without va_copy().
369 sb Update spec files for 2.2.1 release
371 kes Fix memory pool call in ua_output.c. bug #934.
372 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
373 Add test program to fnmatch.c
375 kes Integrate patch to README.vc8 from
376 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
377 edit it to get it into Unix patch format.
378 kes Implement mkpath.c to replace old FSF makepath.c
380 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
382 Release Version 2.2.1
384 kes Update POTFILES.in
385 kes Cleanup a few underquoted AC_DEFUNs in configure
386 kes Apply patch from Martin Simmons that adds a test for va_copy to
389 kes Fix bug #921 by increasing the number of tries to create a new volume
391 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
392 can be called multiple times. Implement a version for machines
393 without va_copy() that gets a big buffer.
395 kes Integrate more portable zone offset code into bsmtp.c
396 Submitted by Attila Fülöp.
398 kes Fix bad SD->FD return status reported by
399 (James Harper) <james.harper@bendigoit.com.au>
400 ebl Fix a bug in read_close_session which return random status
401 thanks to James Harper
403 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
404 and directory names during restore of single file/directories.
405 kes Add sanity checks to .sql command when string is empty. Hopefully
406 that will resolve Dirks Director crash.
408 kes Apply patch submitted by Martin Simmons that corrects a seg fault
409 in the bsmtp chat subroutine when debug is >= 10.
411 kes Fix Director crash when running bat SQL queries.
412 kes Add David's notes on Item 8: Copy pools.
414 kes Rework projects file to be current and ready for a vote.
415 kes Enhance lex scanner error message.
417 kes Tweak LICENSE file to mention BSD code.
418 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
419 if specified on the ./configure.
420 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
421 This class is intended to allow us to open a second bsock to the
422 Director while in the restore subdialog.
424 kes Fix configure to create bat Makefile before creating dependencies.
425 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
426 kes Add a tooltip to the tray monitor.
427 dvl Set the Director's PID file before dropping privs. This fixes
430 kes Update AUTHORs file
431 kes Increase the default max concurrent jobs to 20 in FD and SD to
432 correspond with the default .conf files.
433 kes Rewrite the Win32 service routines. This eliminates the 3 copies
434 some different, of the same file created by RN when porting the
436 kes Rearrange some of the Win32 directories and the placement of the files
438 kes Set DEVELOPER flag in version.h
440 ========================================================================
441 Release Version 2.2.0
443 kes Apply a second doc patch from Marc.
444 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
445 improves the tips section that discusses how to setup multiple
448 kes Update bat README file.
449 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
450 corrects a typo in the Recycle status check in db_find_next_volume().
451 This will probably fix a number of annoying problems with multiple
453 kes Modify most of dird/msgchan.c to use bsock class calls rather than
454 bnet calls -- no functionality change.
456 kes Modify the Verify output to specify if files are missing on
457 the Volume(s) or disk. Fixes confusion in bug #916.
458 kes When more than one Volume is read in a migration job, the last
459 Volume bytes reported are from the last read volume rather than
460 the last written volume. Fixed. This fixes bug #910.
461 kes Fix display of Recycle flag after update volume=foo recycle=yes.
462 It previously printed New Recyle flag is: no. This fixes bug
465 kes Correct seg fault when switching tape drives during restore.
466 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
467 be used until after 2.2.0 release.
469 kes Remove fnmatch() in SD that permitted wild card specifications.
472 kes Fix %g in filename returned by SQL for browse tree reported by
474 kes Fix configure so that it puts config.out in the cwd rather than
476 kes Attempt to fix the locking problem reported by Eric in bug #906.
477 kes Make berrno class to leave errno unchanged after constructor call.
478 kes Make bnet_server use the heap rather than the stack to allocate
479 its socket fd pointers to avoid a crash at termination. Problem
480 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
482 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
483 and putting it in depkgs-qt along with Qt4.3.
485 kes Rework code in acquire.c that switches drives for reading when
486 the Media Type does not match. This should fix bug #906
488 ebl Fix a director segfault during job setup #907
489 kes Correct seg fault in postgresql when first operation returns no
490 rows. Fixes Dirks File browser problem seg fault with bat.
492 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
493 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
496 kes Implement PopUp YES/NO dialog for bat.
498 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
500 kes Correct RunScript to terminate job in FD on failure.
501 kes Change abort_on_error and AbortJobOnError to fail_on_error
502 and FailJobOnError in RunScripts.
503 kes Minor tweaks of code formating in RunScripts, principally to
504 avoid depassing 80 columns.
506 kes Eliminate one #ifdef Win32 in bsmtp
507 kes Implement grow tool to grow a file for testing very large databases.
508 kes Add big-vol-test to test Bacula seeking with > 5GB.
511 kes Modify find_next_volume() to return all values in Media record.
512 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
516 kes Update Release notes
518 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
519 Warning, in previous beta version, all media get from scratch keep their
522 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
523 This should fix bug #842. Made a note to look at removing the temp
524 files at the end of the install.
525 kes Add ability to mount and unmount a file device providing it is
526 marked as being removable and has the appropriate mount and unmount
527 commands defined in the Device resource. This fixes bug #830.
528 kes When applying a storage override, release all previous storage
529 definitions rather than just prepending the new storage.
530 This should prevent a good deal of confusion.
532 kes Implement ./configure search for qwt libraries.
534 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
535 Win32 FD. This should fix bug #893.
536 kes Remove an unnecessary beep in Win32 init code.
537 kes Update copyright dates in Win32 executable about boxes.
538 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
539 code with a BSD getopt.c and getopt.h.
540 kes Remove sched.h from the Win32 compat directory -- not used.
541 kes Remove the Exit menu item from the Win32 tray monitor. If you really
542 need to shut it down, do it through the services panel or the command
544 kes Remove some inappropriate Bacula FSFE copyrights.
545 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
546 kes Fix regress config non-portable test as pointed out by
547 Florian Heigl <florian.heigl@gmail.com>
548 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
549 as pointed out by Florian Heigl <florian.heigl@gmail.com>
551 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
552 Reported by Frank Sweetser.
556 kes Fix client-only build.
557 kes Integrate client-only fixes for bsys (initgroups) and conio from
558 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
559 kes Make arguments to get_scratch_volume() in same order as other
561 kes Rework the prune_volumes() subroutine so that after purging and
562 no volume found in desired pool, it will check for a scratch
563 volume. This prevents recycling the whole scratch pool.
564 kes Add code to status storage to print boffset_t (largefile support).
566 kes Move qwt (Graphics libarary for Qt4) to depkgs.
567 kes You now need a --with-qwt=<dir> to be able to build bat.
568 kes Update src/win32/cats/bacula_cats.def to include the new
569 db_get_query_dbids() call on Win32.
571 kes Correct a problem when selecting a scratch volume and moving
572 it to another pool that lost some columns.
573 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
574 kes Enhance Autochanger error messages to include Volume and device name.
575 kes Rework prune_volumes() code to take account of InChanger flag,
576 and to handle recycling volumes going to the Scratch pool and
577 current pool because the RecyclePool directive.
578 kes Implement a better and more efficient db_get_query_dbids() to
579 handle creating and passing back a list of DBIds.
583 kes Start work on new more efficient DBId subroutine. First use
584 will be for recycling volume to Scratch inchanger.
585 kes Increase number of JobIds in pruning from 1000 to 10000.
586 This to be replaced by above routine.
587 kes Begin implementation of building Qt4 on Win32.
588 kes Correct typo in fix I added for bad TLS shutdown.
589 kes Pull 2.0.3 patches into patches directory.
590 kes Update Release notes. Include qt-console in line count.
591 kes Update Projects file.
593 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
594 bug in migration code where a job that spanned two volumes
597 kes Implement new BST_DESPOOLING blocked state. Change from locking
598 during despooling in SD to blocking. This means that other threads
599 can work with the device structure, in particular the reservations
600 system while despooling.
602 kes Fix return in reservation message queue that missed clearing
603 the jcr lock (implemented 26Jun07 below).
604 kes Rename a number of dev methods to make locking function names
606 kes Document locking in lock.c. Move lock structures to new file
609 kes Move reservations message lock to lock jcr only this
611 kes Move main SD locking code into lock.c (new file).
612 kes Update Win32 build to include lock.c
616 kes Dirk committed the qwt library code for drawing graphs in bat.
617 kes Tweak install of qwt so that it is integrated with ./configure.
619 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
620 out by Eric (my typo).
621 ebl Fix configure.in to get batch mode enable
622 kes Return correct string from authenticate.cpp in bat when connecting
624 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
625 spurious line drops when using TLS.
626 kes Do not file reparse points when restoring a file that already
629 kes Implement Windows reparse points -- similar to directories, but
630 we do not descend into it. This is a first cut. They seem to
631 be backed up, but restore is not yet tested.
632 kes Remove restore_blocking in tls code when shutting a socket to leave
633 it in blocking mode. Hopefully this will fix the encryption bug
634 reported by Frank Sweetser.
635 kes When opening a file for backup, tell the OS that we are going to
636 read it sequentially -- optimization.
637 kes Change variable names in authenticate_director() to not conflict
638 with member names in bat. Caused great confusion with compiler,
641 kes Queue openssl error messages in case of comm problem.
642 kes Do shutdown() call if socket terminated.
643 kes Remove some duplicated code in tls.c
644 kes Move more of the bsock member variables into private and access
646 kes Add Frank Sweetser's tls-test to the regression suite.
648 kes Add Swedish sv.po file
650 kes Don't print clock skew message in FD if less than 3 seconds diff.
651 kes Add a bit of VSS info to status client.
652 kes Implement a first cut of Vista VSS, using Win2003 code.
656 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
657 loaded tape but uses first drive).
658 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
659 This was indeed a Win32 issue.
661 kes Simplify search of autochanger for in-use Volume.
662 kes Fix exit condition of check for in-use volume. kes Remove
663 inappropriate my_postgresql_free_result() in db_close()
665 kes Fix bad return in FD when encryption signature not found.
666 Probably caused a crash.
667 kes Inhibit missing encryption signature error messages for
668 file types where no signature computed.
669 kes Correct inverted check on autochanger in reservation system.
670 kes Tweak debug code in autochanger reservation.
672 kes Add some additional locking in the cats directory in subroutines
673 that modify packet variables called from batch insert.
674 kes Rework how dcrs are allocated. new_dcr() can now be called
675 with an existing pointer, and it will simply clean it up.
676 This allows the reservation system to test various different
677 devices, and will permit easy device changes.
678 kes A bunch of changes all over to handle new new_dcr() calling
680 kes Work more on the Volume management in the SD. Remember Volumes
681 for tape drives and for autochangers (even virtual disk changers).
682 kes When looking at the Volume list to reserve a drive, handle
683 autochanger names correctly by interating through the changer
684 devices. Also call the Director to see if a Volume is suitable
686 kes Fix some bugs in bscan. Make sure all media records are written.
687 Make sure that valid JobMedia records are written for disk files.
688 Previously they were completely wrong.
689 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
690 that the URLs don't change and so that the developers will all
691 work off the same copy. Rebuild from scrach.
692 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
696 kes Fix seg fault in FD from incorrect digest size.
697 kes Fix argument to non-OpenSSL crypto.c subroutine.
701 kes Remove a few malloc()s from the encryption code.
702 kes Use the class calls to bsock in filed/backup.c and restore.c in
703 place of the old bnet_xxx code.
704 kes Implement code that does an on the fly calculation of the
705 signing digest during restore of encrypted files. It makes
706 a best guess at the algorithm, and if it is not correct, will
707 then revert to the old code which reads the file after it is
709 kes Implement at least one missing crypto stream in stream_to_ascii()
710 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
711 #877 where a reload with bad syntax causes Dir to exit.
713 Cut: 2.1.14 beta (not released)
715 kes Do not free a volume on a tape drive until another volume is
716 mounted and read, or the autochanger unloads the volume.
717 This should help the SD re-use volumes that are already mounted,
718 and should fix bug #886.
719 kes Apply patch from user brettedgar that allows gnome2-console include
720 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
721 kes Apply patch from Lucien Weller that fixes day of week calculation
722 because of DST flag problem. Fixes bug #887.
724 kes Move find_next_appendable_volume() to after acquiring a valid device
725 in reserve.c. This fixes bug #864 -- confirmed by reporter.
727 kes Unable to reproduce bug 872. However added additional testing for
729 kes Bug #874 resolved by documenting SQLite limitations.
730 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
731 kes Bug #881 resolved by removing typo in mtx-changer script.
732 kes Made Frank Sweetser's wiki the official Bacula wiki with his
733 approval. Added a link to the wiki on the web page, and implemented
734 a backup from http://paramount.ind.wpi.edu
736 kes Fix update allfrompool to pass pool name.
738 kes Convert to pure GPL v2 license.
739 kes Fix sscanf problems reported by Peter Buschman that caused
740 a bus error on Solaris.
741 kes Rework (simplify) the select prompt in bat.
742 kes Move get_jobid_from_tid() into lib and create a
744 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
745 should definitely fix the problem of lost error messages in the
747 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
748 kes Eliminate tcpd.h from the project. Enclose the #include from the
749 library with extern C ...
750 kes Add print of signal name when a signal is trapped.
754 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
756 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
757 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
758 makes SQLit3 run 30 times faster, though a bit less safe.
759 kes Implement --with-batch-insert in configure and detection of thread
760 safe libraries. It is on by default, but turned off if no thread
761 safe library (e.g. SQLite 2) is available.
763 kes Fix Bacula PostgreSQL buffer overruns.
764 kes Do better checking for NULL results returned from PostgreSQL;
765 implement retry for failed queries; clear results buffer after
766 failed query. Hopefully this will correct the PostgreSQL failures.
768 kes Implement algorithm to handle only one appendable volume with
769 Prefer Mounted Volumes = no.
770 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
771 returned from a query.
772 kes Make volume lock recursive.
773 kes Implement an additional volume reservation algorithm that
774 starts by considering all reserved volumes then uses the
775 old brute force algorithm of searching the resources to
776 find a suitable device.
777 kes Add new reservations debug code and refine the old code.
778 kes Update the win32/dll/bacula.defs file.
780 kes Tweak reservations algorithm to permit a few more cases, i.e.
781 volume reserved, but on different drive, ...
782 kes Enhance SD status to include Pool and Media Type for drive in a
783 more readable format (a bit longer).
784 kes Fix PostgreSQL double free.
786 kes Minor refactoring of restore decryption code.
787 kes Add code to smartall.c to detect double free of a buffer.
789 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
790 so that bsmtp will create a correct email address (mailbox only).
791 kes Modify 'memory' command so that the buffers are listed as 'In use'
792 to avoid confusion with Orphaned buffers.
793 kes I reworked the OpenSSL include/lib flags to be handled in
794 the standard Bacula way, which should fix bug #863 concerning
795 non-standard OpenSSL libraries.
797 kes Implement Help Browser window for bat.
798 kes Fix reload bug that reset StorageId to zero.
800 kes Fix TLS #ifdefing when TLS turned off.
801 kes Ensure that when labelling a tape with Slot=0 that InChanger
803 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
805 kes Add StartTime to final uar_sel_jobid_temp query so that we can
806 add DISTINCT (required by PostgreSQL).
807 kes Implement BSOCK authenticate_director() method. Eventually will
808 authenicate all daemons.
809 kes Move several more functions into the BSOCK class.
811 kes Add code to tell the OS that we no longer need a cached
812 file that we were reading. In findlib/bfile.c. Also,
813 only cache files that we are reading. Thanks to
814 Tobias Oetiker <tobi@oetiker.ch> for the idea.
815 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
816 kes Implement script to automatically generate cats and dll .def
818 kes Update README.mingw32 to include new .def file generation.
819 kes Correct typo in UTF-8 error message as reported by:
820 jhernandez <julianhernandez@gmail.com>
821 kes Add additional sm_check() code on debug level 1.
822 kes Set default debug level to 1.
823 kes Trap SIGABRT in attempt to get traceback.
825 kes Reduce bat connect timeout from 30 to 15 seconds.
826 kes More restructuring and implementing BSOCK class in place of
828 kes Remove a few unnecessary malloc() tests in crypto code.
829 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
830 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
831 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
833 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
835 kes Fix Verify InitCatalog. The attributes were not pointing to the
836 correct saved location.
837 kes Implement message callback so that GUI is sure to get all
838 daemon messages. Currently displayed in a dialog in bat.
839 kes Ignore SIGUSR2 (Bacula timer) in bat.
840 kes Apply regress patch from bug #859 to allow regress to work
841 with Solaris compiler.
843 kes Begin adding TLS support to bat.
844 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
845 clean up lex.c and make it more readable.
847 kes Move more bnet functions into the BSOCK class.
848 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
849 kes Complete change of berrno strerror() method to bstrerror()
853 kes Cleanup incorrect email addresses in bsmtp.
854 kes Make bat display initial messages rather than discard them.
856 kes First cut of adding .mod to the run command.
857 kes Implement auto display of messages in bat.
858 kes Enhanced preferences to allow all Bacula output to be
861 kes Try to make bsmtp date routines more generic.
862 kes Fixed bug #856 autochanger documentation.
863 kes Rework bsmtp date editing for Win32. This fixes bug #854.
864 kes Add new cats entry point so Win32 builds.
866 kes Attempt to fix bsmtp date editing on OSes without %z editing.
868 kes Do better checking for the MySQL 64 bit libraries looking for both
869 .a and .so libraries.
870 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
871 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
872 kes Require the thread safe version of MySQL during configure. Thanks
873 to Andre Noll for pointing this out.
874 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
875 continuing in migration code.
876 kes Apply implementation of tray-monitor font derived from gnome-console
877 submitted by Andreas Piesk <a.piesk@gmx.net>
879 kes Eliminate important memory loss in SQLite
880 kes Fixed the batch insert MySQL thread specific data that was not
881 being freed. See cats/mysql.c:db_thread_cleanup().
882 kes Fix restore before command.
883 kes Convert old hdr.name to name() in a few places.
884 kes Implement update jobid command.
885 kes Return all time_t dates in db_get_job_record()
886 kes Stop watchdog in SD earlier.
887 kes Put Pool just after Storage in please mount message.
888 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
891 kes Update the po files.
892 kes Fix Verify InitCatalog by making it cache attributes.
894 kes Change name bacula-bat to bat for man 1 page to correspond to
896 kes Check for client and store NULL pointers in status command. This
898 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
899 kes Fix sign extended editing of %p.
900 kes Clean out a little old #ifdefing in cats/mysql.c
902 kes If time diff between DIR and FD is more than 600 seconds convert
903 INFO message to WARNING.
904 kes Implement heap size display in status for all daemons.
905 kes Attempt to fix MySQL db open memory loss (not successfull).
906 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
907 kes Eliminate memory loss in MySQL (possibly other SQLs) during
908 Query. This looks like a MySQL but but by doing extra releases,
909 the memory goes away. This should fix bug #847.
911 kes When backup fails, cancel SD before waiting for sd termination.
912 kes If SD is waiting for FD to connect during cancel, wake up the
914 kes Fix fsf code so that errno is correctly reported.
915 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
917 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
918 so that Bacula doesn't later stumble into a seg fault.
919 kes Use the term Restore Client in the restore Job report.
920 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
921 the original job's FileSetId.
922 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
923 spooling in migration jobs. Not yet tested.
924 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
925 reading conf file from a pipe. However, do it with open_bpipe()
926 rather than popen. Not yet tested.
928 kes Fix an ugly bug where the VolCatBytes were getting updated
930 kes Implement bconsole memory command that prints current memory
931 usage, plus smartalloc dump.
932 kes Clarify some error messages in backup, admin, and migrate.
933 kes Shrink label dialog to smaller size.
934 kes Invert Cancel OK buttons on restore to be OK Cancel.
935 kes More strerror() to bstrerror() conversions.
937 kes Start implementing bstrerror() in place of strerror().
938 kes Stripping path -- seems to work.
940 kes Prevent door and port files from being restored (mostly
942 kes Free an unreleased buffer in compat code.
943 kes Change console Job name from *Console* to -Console- to eliminate
944 Win32 filename problems. Put Win32 path separator when creating
945 Console file. This fixes bug #846.
946 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
948 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
950 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
951 to force Win32 error message.
953 kes First cut strip path. The data should be passed to the FD,
954 but nothing is done with it yet.
955 kes Enhance the digest and signature routines in the crypto
956 library to accept a JCR and to use it to print error messages
957 so that they will go in the Job report rather than the daemon's
959 kes Simplify some of the verify signature code.
960 kes Simplify a few of the alternative returns in the signature
963 ebl Use only POSIX regex instead of GNU regex in breg.c for
964 File relocation. It fix broken freebsd compilation.
965 kes Convert all other Dir files to use new ua class message
967 kes Tentative fix for missing digest signature in bug 807.
968 kes Correct handle problem in new win32_ftruncate routine.
969 kes Convert ua_purge.c and ua_update.c to use new ua class
970 message routines for bat.
972 kes Correct incorrect installation of LICENSE in Win32 installer.
973 kes Display LICENSE at the beginning of the Win32 install.
974 kes Attempt to correct the need for the png files to be installed
976 kes Reapply my bat.conf install script in qt-console. I think I
977 editted bat.pro instead of bat.pro.in and it was lost.
978 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
979 the /var/lock/subsys for subsysdir. Also corrects typos in the
982 kes First cut update job.
983 kes Correct configure to include qmake of src/qt-console directory.
985 kes Make restore job yes/mod/no print in one command so GUI works.
986 kes First cut implementing backup and restore client.
987 kes Correct editing in Verify output that caused a seg fault.
989 kes Insure that bat.conf is not overwritten during installation.
990 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
991 while I was implementing migration in March 2006 !
993 ebl Cleanup file relocation, using char *RegexWhere instead of
994 char *where + bool where_use_regexp
995 kes Update some manpages and add bat manpage.
996 kes Make a first cut at converting bacula.spec.in for bwx-console
998 kes Apply patch from John Goerzen to add hostname as fourth argument
999 to make_catalog_backup script.
1000 kes Fix typos I introduced into bsmtp.c
1001 kes Make pm_strxxx() routines handle input of NULL pointer. This
1002 is to protect from NULL pointers returned from SQL databases.
1003 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1004 kes Add more debug to FIFO code -- fix fifo regression test.
1006 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1007 kes Add thread timer to bnet_connect() to break from OS if wait time
1010 kes Update Win32 build to include new files, new symbols, and
1012 kes Implement socket level heartbeat (tcp_keepidle)
1013 ebl Commit File relocation patch
1014 kes Make bat have 'make install' target.
1015 kes Warn during install if old gnome-console binary found.
1016 kes Warn during install if old wx-console binary found.
1017 kes Add -8 option to bsmtp command line to add content type utf-8.
1018 Fixes bug #809. (Character coding problem in bsmtp).
1019 kes If < is found in target (from, to, cc) then do not enclose the
1020 target in < > in bsmtp. Fixes bug #772 (malformed address).
1021 kes When printing certain items in dbcheck, stop after 300000.
1022 Fixes bug #822. (dbcheck loops).
1023 kes Incorrect status in Dir after waiting for mount with poll set.
1026 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1028 kes Print waiting to reserve a device every 5 mins.
1030 kes Don't call close_part in label.c if tape and relabel.
1031 kes Don't free volume if busy in close() -- should help with
1033 ebl Fix #824 RunScript bug (After script could be execute twice)
1034 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1035 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1036 Add a regression script to test RunScript
1038 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1041 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1042 deprecated. No additional bugs will be fixed, and they will be dropped
1043 in a future release (probably 2.4.0).
1044 kes Change name of wx-console to bwx-console to make it more Bacula
1046 kes Change the name of gnome-console to bgnome-console to make it
1049 kes Some time in March, a Feature Request with patch from Jorj Bauer
1050 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1052 The ability for the director to validate a Client (FD) CN against
1053 an arbitrary set of patterns rather than the hostname, with
1054 A new 'TLS Allowed CN' set of directives which are implemented
1055 in the Client resource. Then pattern matching is used in place
1056 of hostname matching against the Certificate's CN. As an example, we
1057 have certificates which (a) use a local CA, and (b) have a CN of the
1059 kes Add new/changed entry points to Win32 build
1060 kes Create unaccepted-projects for projects that are not accepted.
1061 kes Simplify locking in the reservations system.
1062 kes Add more debug code in reservations.
1063 kes Make sure error condition on reserving a volume is handled correctly.
1064 kes Correct handling of volume_in_use.
1065 kes Correct handling of initializing a device.
1066 kes Move handling of broadcasting releasing a device into release_device().
1067 kes Correct attaching dcr to dev so that it is only done if device
1068 is properly initiated.
1070 kes Locking debug level tweaks in SD.
1071 kes Tweak new Volume code.
1073 kes Add exec external-command [wait-seconds] to bconsole. This
1074 executes the external-command. Note! normally external-command
1075 should be enclosed in double quotes.
1076 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1077 it should normally be off in a production system.
1079 kes Implement die command for SD so that we can force it to dump.
1080 kes Implement SD lock debug code.
1081 kes Implement new algorithm for keeping Volume list in SD. It
1082 is now owned by the device.
1084 kes Implement new code for freeing in use volumes that should
1085 resolve if not all, some of the problems of multiple drive
1086 tape conflicts described in bug 801.
1088 kes Fix gui/bacula-web/images files in svn.
1089 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1091 ebl Fix a bug in batch mode (in string escape)
1092 kes Correct migration prune SQL typo that crept in in a
1093 recent 2.1.x change.
1095 kes Move bnet_despool() into class in bsock.c
1096 kes Modify job report to include director name and Build OS.
1097 kes Move drop root privilege and check_catalog() before fork.
1098 kes Add update database scripts (version 9 to 10) to updatedb directory.
1100 ebl Check size and age of each file after its backup to see if
1101 it has changed during backup, if 'checkfilechanges' is set.
1102 The FD will do an extra check (stat(2)) after
1103 each file backup. mtime, ctime and size are compared with
1104 'before backup' information. If time or size mismatch, an
1105 error message will be generated. You must upgrade FD to use it.
1107 kes Make database name and user configurable
1108 --with-db-name=xxx --with-db-user=xxx
1109 kes Add back database type to message.c for debugging.
1111 kes Implement dir_sql() which issues an SQL query.
1112 kes Modify bat medialist to use dir_sql() and do some minor C++
1113 formatting as well as eliminating a number of pointers, simplifing
1116 kes Fix some of the mtx-changer grep commands for tape label readers.
1117 kes Convert a number of bsendmsg into the appropriate send/warning/error
1118 message class calls.
1119 kes Suppress the using database message in the .sql command.
1120 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1122 kes Add context menu for floating a window.
1123 kes Some minor cleanup and name changes in qt-console
1124 kes Add doing mt setblk 0 in Win32 mtx-changer.
1125 kes Apply Martin's bug fix to move definition of ENODATA for
1127 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1128 sqlite2 and sqlite3.
1130 kes More pruning cleanup.
1131 kes Turn on wait_for_drive by default in mtx-changer.
1132 kes Turn on Batch insert code by default as it now passes regression.
1133 kes Add ./configure --enable-bat to enable building of Bat.
1134 No install yet though.
1136 kes Implement a new .sql command for bat.
1137 kes Implement code to turn off pruning in obtaining the next volume.
1138 Pruning is turned off for the status dir command, but turned on
1139 for SD requests and for the list nextvolume command.
1141 kes Correct Qmsg() that was not updated correctly when committing a
1142 previous change (probably the recent TLS patch).
1144 kes Write new subroutine is_volume_purged() that explicitly checks
1145 if the Volume is purged, and if so marks it as such. This should
1146 resolve problems reported about needing to mount twice to recycle
1148 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1149 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1150 amount of duplicated code.
1151 kes Do volume pruning only for the Media Type desired (reduces pruning time
1152 if multiple Media Types are in the same pool).
1153 kes Implement more detailed info in the Job report for the Bacula version
1155 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1157 ebl Add bbatch tool to bench database and insert mode.
1158 Fix sql quote stuff in batch mode
1159 Fix sql stuff for mysql
1161 kes Correct problems with am/pm scheduling. Fixes bug #808.
1162 kes Implement new prunning code that prunes up to 1000 jobs at
1163 the same time. The same technique can be applied to a number
1164 of other prune/purge subroutines.
1165 kes Add an insanity check when starting a new tape job to ensure
1166 that the tape position has not been changed. If so fail the
1168 kes Fix Win32 build for dlls to add the folllowing:
1169 src/lib/bsock.c -- new file with new entry points
1170 src/lib/dlist.c -- new entry points
1171 src/cats/sql_create.c -- new entry point
1172 src/cats/sql_cmds.c -- new DATA item exported
1174 ebl batch mode cleanup bscan-test is ok now.
1175 kes Implement SD code to check length of disk volume before appending.
1177 kes Correct return status on db_batch... routines.
1178 kes Add call to db_write_batch_file_records() to migration code.
1179 ebl Fix AfterJob timing
1180 kes Move the checking of the database in initializion of the Director
1181 to after we drop privileges. This avoids the need for both root
1182 and bacula access to the DB.
1183 kes Correct a misplaced variable definition in src/filed/backup.c
1184 kes Correct how the new batch insert db_create_attributes_record()
1185 uses the arguments. Caused a seg fault in bscan.
1186 kes Implement lock() and unlock() methods in DEVICE class.
1187 Implement block() and set_block(xx) methods in DEVICE class.
1188 kes Modify bnet_connect() so that it uses time() to check for the
1189 wait time expiring (on some OSes, some system calls may not
1190 return immediately).
1191 kes Modify Verify to obtain the previous JobId when it is actually
1192 running rather than at schedule time (as it was in 1.38.x).
1193 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1195 kes When checking pid in pid file, continue running if the pid is
1196 the same as ours. This occurs on IRIX after a system crash.
1199 kes Extend new GUI API.
1200 kes Make the ua structure a class, and implement send_msg(),
1201 error_msg(), warning_msg(), and info_msg().
1203 kes Apply fix from for building wx-console on the Mac from
1205 kes Implement new select mechanism for GUI programs.
1206 kes Reorganize initialization of stackedWidgets in bat.
1208 kes Add updated nagios plugin supplied by Christian Masopust.
1210 kes More bat implementation.
1211 kes File migrate bug with Pool Occupancy using mediaid instead
1212 of jobids. Fixes bug #795.
1213 kes Fix orphaned buffers in filed backup and verify due to
1214 crypto buffers not freed during errors. Fixes bug #789.
1215 kes Extend new GUI api code to tree commands.
1216 kes Ensure that tree and dot commands check console ACLs.
1217 kes Permit marking directory with trailing slash.
1218 kes Allow 20 console connections (instead of only 10).
1220 kes Add smartctl call to bacula-sd.conf as an example of getting
1223 kes Modify jobq.c to let simultaneous restore jobs run. This may
1224 cause them to fail if they cannot get a drive.
1225 kes Add Client Connect Wait to Storage daemon to permit users to
1226 modify the time the SD waits for a FD connection.
1228 kes Correct virtual changer check which was backwards. This caused
1229 volumes to be unloaded into slots already occupied.
1231 kes Apply Command ACL filter to JobId list in restore command.
1232 kes Correct typeo in var.c patch.
1234 kes Don't let Bacula prune File or Job records for the current Job.
1235 kes Fix variable substitution pad + inc bug reported (with patch)
1238 kes Correct SQLite log table index as reported by Luca Berra.
1240 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1242 kes Begin implementing new comm signals for API.
1243 kes Fix a few places in lib/message.c where the open fd may
1245 kes Continue implementing lib/bsock.c (real class). Make jcr,
1246 who, host, and port private. There are new methods to access
1247 them for non-class use. This required touching a number of files.
1249 kes Add LANG=C to autoconf/randpass so it works with languages other
1250 than English. Fixes bug #788.
1252 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1254 You will not be able to generate Include/Exclude list any more.
1255 It will be fixed soon.
1256 If you want to use this, you can apply
1257 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1259 kes Restore of sockets created false error messages because Bacula
1260 no longer restores sockets, but the code was still trying to
1261 set the attributes on a non-existent file. Reported by a user.
1262 ebl finish RecyclePool feature
1263 Media will takes Pool.RecyclePool
1264 when moving from Scratch to a Pool or when user will do
1265 update volume=xxx frompool
1266 To use it, add RecyclePool = aPool to your Pool resource
1269 RecyclePool = Scratch
1273 kes Expand new BSOCK class adding signal() and new BNET signals.
1274 kes Begin enhancing the dot commands adding a new API function
1275 that returns more information and will make it easier
1276 to interface to the Director from a program.
1278 kes Make DEVICE fd private. Its new name is m_fd, and can be
1279 obtained with dev->fd() outside the class. This is the
1280 first of many DEVICE members to be made private.
1281 kes Implement Michael Renner's idea on having a virtual disk
1282 changer. I made some minor modifications (e.g. I did not
1283 implement the Virtual Changer directive, but simply set
1284 the Changer Command to an empty string.
1286 kes Implement a BSOCK send() method that writes the whole record
1287 in a single write() request rather than in two.
1288 ebl add update volume=xxx recyclepool=yyyy
1289 volume takes recyclepool from pool when using update volume=xxx from pool
1291 kes Fix encryption deblocking bug, which caused some restored files
1292 to be truncated. This fixes bug #763.
1293 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1294 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1296 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1297 ebl Use btime_t instead of uint64_t in media patch.
1299 kes Optimize the use of the database a bit in the Status dir command.
1300 Only open it when needed, ensure that if any previous database
1301 was opened, it is closed.
1303 kes Correct VolCatBytes bug from media patch.
1304 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1305 in the case of orphaned records.
1306 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1307 and File records in 300K chunks to be more efficient. This
1308 idea came from Juan Luis Frances (if I remember right).
1309 kes Apply Eric's scratch patch that moves a purged Volume to
1310 the RecyclePool. Question: how is RecyclePool set? what
1311 happens to the ScratchPool?
1312 kes Apply Eric's media patch that collects read/write media
1313 times as well as byte counts. This patch requires a
1314 simultaneous upgrade of the DIR and SD. Note, there
1315 should be some way to turn off timing. I'm not sure
1316 times are in Bacula units.
1317 kes Apply Eric's batch-insert patch.
1319 kes Update projects list.
1321 kes Implement Include/Exclude file lists in FD as dlists using
1322 the new dlistString class. This permits efficiently having
1323 large include/exclude lists and completes project Item 25.
1324 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1325 console is authorized to cancel the job. This fixes bug
1327 kes Modify SD so that the VolCatJobs medium record is updated
1328 at the beginning of a Job rather than the end. This
1329 fixes bug #775 where exceeding MaxVolJobs caused jobs
1331 kes Added a mutex around getting and setting Volume information
1332 so that multiple simultaneous jobs will single thread.
1334 Switch to using Subversion
1335 kes Remove src/pygtk-console/ from configure
1337 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1338 plus the entrypoints.
1339 kes Apply patch supplied that corrects debug print
1340 in canceling jobs for max run time. Supplied as
1341 part of bug #621, which was previously fixed.
1343 kes Test on job_canceled() and sd_msg_thread_done inside
1344 loop starting the message thread to avoid a race condition.
1346 kes Remove rl_catch_signal from console.c as it conflicted
1347 with the header definition. Fixes bug #765.
1348 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1350 kes Clarify some stored/acquire messages to indicate if the
1351 problem is with read or append.
1353 kes Fix memory leak with storage ids in cats/sql_get.c
1354 kes Terminate watchdog earlier to avoid reference to released
1355 memory -- reported by Jason Austin.
1356 kes Move closing the database from jobq.c to the director daemon
1357 termination routine. This fixes memory leaks for shadow jobs
1358 (i.e. migration jobs).
1359 kes Free up the unique jobid chain items in migrate.c. This fixes
1360 a memory leak problem.
1361 kes Convert some ugly looking for statements to use foreach_alist
1362 in findlib/find.c. This will facilitate converting the structures
1363 to use dlist (for large include/exclude lists).
1364 kes Fix a bug in the btree.c and btree.h routines, then rename them
1365 rblist and add them to be built in src/lib. Include some new
1366 methods written by Rudolf Cejka that make the code more readable
1367 (hides some of the ugly casting).
1368 kes Add set_next() and set_prev() methods which make the code much more
1369 readable. Also add a new dlistString class that facilitates storing
1370 strings in dlists. To be used in the large include/exclude lists.
1371 kes Make some trivial modifications to lib/tree.h that use rblist
1372 rather than dlist for storing the tree links. This was suggested
1373 by Rudolf Cejka. The result of this is that the restore tree now
1374 uses red-black binary trees rather than simple linked lists. This
1375 should give rather dramatic speed improvements for directories
1376 contining large numbers of directories/files (more than 10000).
1378 kes Fix maxruntime bug #621.
1380 ebl Implement the include JobID in spool file name project.
1381 kes Reorder projects file in order determined by Jan 2007 vote.
1382 kes Implement item #12 on project list -- quick release of FD by
1384 kes Fix open of SQLite3 db where user does not have write permission
1385 so that DIR does not crash. Fixes bug #761.
1387 kes Add back missing @ in Win32 Makefile.
1388 kes Change 'Device not configured to autolabel' from INFO
1390 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1391 which should restart an indefinite # of times.
1392 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1393 other DIR specifications.
1395 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1396 Fix path quoting in SQLite scripts.
1397 Fix problems with SHGetFolderPath.
1399 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1401 kes Fix Job restart on error bug that promotes an Inc to a Full
1402 backup. This should fix bug #755.
1403 kes Add qt-console and first cut of code.
1407 kes Fix Bacula->Documentation link on Win32 to point to index.html
1408 instead of bacula.html. Fixed bug #750.
1409 kes Return JobId in db_get_job_record() when JobId==0. This should
1411 kes Do not release source pointers when restarting a failed job.
1413 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1414 This *should* fix bug #747.
1415 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1418 kes Modify USTORE constructor to set an empty store_source string,
1419 and don't copy the store_source string in a cancel. Hopefully
1420 this will fix Arno's seg fault, bug #744.
1421 kes Add back code to disable conio in configure. Fixes bug #743.
1422 kes Correct the Options scanner in the FD to correctly handle
1423 SHA1 option, which was eating the next option. Reported by
1425 kes Add code to indicate when the SD is spooling, spool wait, and
1426 despooling as requested by Alan Brown.
1428 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob