1 Technical notes on version 2.3
5 kes Fix --archivedir addition to configure. Replace it with
6 --with-archivedir in configure.in This fixes the regression
8 kes This patch fixes bug #1012 where the job is canceled because
9 of Max Run Time exceeded when the job has not yet started.
11 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
12 one 'part' to write. Instead of each part being stored on disk,
13 written to DVD, then deleted from disk, all parts are written to disk,
14 and only the last is written and deleted from disk.
15 kes This patch fixes the status command to include the formating string for
16 JS_AttrInsterting. It fixes bug #1021.
17 kes This patch should fix the Mac OS X build problem on the latest
18 Darwin, where sys/types.h was not included correctly (apparently
19 due to a change in the Mac headers). The solution was to explicitly
20 ensure that it is defined for the ./configure.
21 This patch also has a rebuild of configure that includes the Debian
22 qt4 kludge (look for alternate qt4 names).
23 This patch fixes bug #1020.
24 kes This patch should ensure that queued messages to the console are
25 displayed as soon as possible. It should fix bug 1007, but has been
28 kes This patch fixes the infinite loop when trying to increase the
29 maximum number of volumes in a Pool during the add command.
30 This patch fixes bug #1008.
34 db Remove extra data on estimate command in joblist for bat.
36 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
37 really change anything, but is the beginning of doing it *right*.
38 To do it completely right the LastWritten date must be passed to
39 the SD, but it is not yet done.
40 kes Minor tweaks to some bat restore SQL.
41 kes This patch fixes bug #1003 where putting the message output from
42 a Verify job into the catalog results in a recursive loop. The problem
43 seems to show up only with postgresql (to be verified).
44 kes Correct %x to %p in postgresql debug statement.
46 kes Fix bug #942 where lots of emails where generated when the heartbeat
47 interval was low and Bacula wanted a different tape from the one in
50 ebl Add new SD despooling attributes and Dir inserting attributes
51 job status codes in the catalog (Status table).
53 ebl Use qmake-qt4 instead of qmake when available (debian system).
55 kes Add a security warning to src/cats/make_catalog_backup.in indicating
56 that passing the password via the command line (arg 3) is insecure.
57 This responds to bug #990 (it doesn't fix it).
59 kes Set default debug_level to zero. This corrects bugs #991 and #993.
60 kes Fix a crash in bat when it cannot connect to the Director for example
61 if the Director is not running.
62 kes Remove redundant INDEX (JobId) from File table in the trunk.
64 kes Make explicit exception to GPL in LICENSE to permit linking
65 the Win32 FD with Microsoft VSS code.
66 kes Apply the Solaris package patch from
67 Masopust, Christian <christian.masopust@siemens.com>
68 kes Apply the patch to optionally add a timestamp in the debug output
69 submitted by Mariusz Czulada <manieq@wp.eu>.
71 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
72 backend (sql_strerror). Fixes bug #989
74 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
75 It applied with no problems.
76 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
78 kes Redirect stderror to stdin on mt status command in mtx-changer.in
79 since the status is returned on stderr on Solaris.
80 kes Activate Close button on tray-monitor window. This fixes
82 kes Check for NULL item in parse_conf.c before calling it. In the
83 case of Device, there is no item and this caused a seg fault when
84 Device appears in the conf file.
85 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
86 avoids pulling in config.h multiple times in some new code.
88 kes Fix spurious warning message printed when creating a volume with
89 a LabelFormat. This fixes bug #976.
93 kes Add JobId in place of Job name in all the Jmsg() output.
94 kes Correct the APP_DESC for the Win32 storage service (remove an e).
96 kes Make maxvol-test and new more strict maxvol2-test work.
97 kes Print JobId in all Jmsg() job output.
99 kes Add new SD despooling attributes and Dir inserting attributes
100 job status codes. This fixes bug 961.
101 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
103 kes Fix doc issue. This fixes bug #963.
104 kes Fix listing performance problems in bat. Pointed out by
106 kes Remove old debug code.
107 kes Fix bat code that tests for Win32. This should fix bug #968
108 kes Query 5 list wrong Vol after migration. This fixes bug #960
110 ebl Fix #969 where user can't change Replace option in restore menu.
112 kes Save jcr in thread specific data (tsd) for each thread.
113 kes Make Dmsg() print JobId as -%u.
114 kes Make Jmsg, Emsg, and others automatically pickup the jobid
115 for the thread if it exists.
116 kes Remove old reservation debug jid code.
117 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
118 ebl Add an option that permit to specify spool size in job
119 definition. (Applying patches/testing/spoolsize_per_job.patch).
120 You must upgrade SD and DIR at the same time.
121 dvl Add new configuration item --archivedir
122 dvl Adjust regression tests to use tmp not /tmp. This will allow
123 multiple concurrent runs of the regression tests.
125 kes Fix race condition that drops final block written to volume.
126 This happens in rare cases with multiple simultaneous jobs
127 when the Volume fills. This fixes bug #964. May be related
128 to bug #935 and possibly #903.
129 kes Eliminate more strerror() and replace with bstrerror().
130 kes Remove BSD getopt and replace with unrestricted IBM version.
131 kes Fix Win32 build for changed calling sequences.
132 kes More tweaks to the mount volume routines to get everything
133 right. Changed variable name from find to have_vol, which is
134 much easier to understand.
135 kes Enhance btimer debug code.
137 kes Fix FD->SD authorization failure, which was due to spurious
138 wakeups from a pthread_cond_timedwait(). Simply check the
139 predicate before continuing. This fixes bug #953.
140 kes Add const char where needed (more to do). Remove temp debug code.
142 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
143 kes Don't overwrite error message in check_tables_version.
145 kes Unlock batch insert tables with same calls used elsewhere.
146 kes Allow starting 59 jobs a second.
147 kes Make SD session key more random.
148 kes Add retry for SQLite opening db if it fails. Probably helps
150 kes Suppress extra error messages during batch insert failure.
152 kes Add jcr to timer packets so if killed message can be sent to job.
153 kes Add JobId to all Dmsg() output.
154 kes Put some FD auth code on dbglvl rather than fixed.
155 kes Return insert attributes error message in db msg buffer to avoid
156 false error messages. Helps fix bug #966.
157 kes Separate batch init error messages. Probably helps fix bug #966.
158 kes Make SD code that contructs attribute insert check string lengths
160 kes If Dir gets an error during inserting attributes, cancel SD.
161 This reduces unnecessary error messages.
163 kes Correct search boolean for getting Volume info
164 ebl Cleanup batch insert code. Probably fixes bug #965.
165 kes Back out one small change to the reservation system (reserving a volume).
166 kes Rework how a Volume is mounted. It is now much more intelligent and
167 will always attempt to use any mounted volume if possible and reduces
168 calls to the Director asking about volumes.
170 kes Turn off some code when batch insert not enabled.
171 kes Edit FD name in connect error messages.
172 kes Rework the reservation system to take into account that the Director
173 might give us a Volume that is different from the current one being
174 used, and to ensure that we don't exceed Maximum Volume Jobs.
175 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
176 fatal error with multiple jobs running'
177 kes Add more debug code in reservation system.
178 kes Implement maxvol-test to check bug #947.
180 kes Add code to handle tray monitor separated from Win32 FD.
181 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
183 kes Add missed return in fixing verify bug -- trunk only.
184 ebl Fix a command parser issue causing a director segfault.
185 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
187 kes Increase the max block size to 4MB fixes bug #957.
188 kes ERABT if user sets min block size > max block size. Fixes bug #956.
189 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
190 is not properly mounted (recognized) during a poll.
191 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
192 Job that has differences reports Verify OK.
193 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
195 ebl Add an option to operate on all pools with update vol parameters.
196 This complete the project 20. Patch from Nigel Stepp.
197 ebl Add history support to bconsole when using readline.
198 Using Ctrl-D to exit doesn't update .bconsole_history
199 kes Modify new volume algorithm to use max MediaId for generating next
200 volume number rather than the count of Volumes. This should essentially
201 eliminate the failure rate if some volumes were deleted. Bug #921.
202 kes Begin implemention of Optimize Job Scheduling.
203 kes Implement restore callback that Dirk and I agreed on for bat
204 restore. This fixes bug #928. Restore of backup of zero files fails.
205 kes Fix SQL Catalog logging which broke with new db_escape_string
208 Release Version 2.2.4
210 kes Fix bacula_cats.def for new db_escape_string().
211 kes Increase size of name string when FD making connection to SD.
212 May fix bug #953. FD->SD connection failure.
214 kes Add code to help Dan debug 2drive-incremental-2disk test.
215 kes Add code to try to fix bug #908.
216 kes Add waits to multiple exit detection code to try to force pid
217 file to always be deleted.
218 kes Restore good dev.tar.gz to rescue set appropriate binary property.
220 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
221 trying to switch drives by checking for blocking before unblocking.
223 kes Cancel storage daemon in all cases where FD reports error. This
224 should fix virtually all cases of bug #920.
225 kes Fix db_escape_string() for MySQL which did not compile.
227 kes Fix error message that was clobbered when Dir tells SD it does not
228 have write permission on Volume. This should fix a minor point
229 in bug #942, but not the main problem.
230 kes Add code to cancel job in SD if FD connection fails. This should
232 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
233 dvl Pass jcr and db into db_escape_string() to enable better escaping
235 kes Fix migration code to get correct Volume name with multiple volumes
236 by skipping |. Fixes bug #936.
237 kes Implement patch supplied by Landon to fix bug #944 where using
238 TLS with bconsole uses 99+% of the CPU.
239 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
241 kes Move patches into patches directory.
243 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
246 ebl Using 'm' in bconsole will show messages like before,
247 and not memory usage.
248 kes Fix bug #935, and probably also bug #903 where files were not
249 restored. MediaId was not properly set in JobMedia record after
252 kes Suppress chown and chmod error messages if the FD is not running
255 kes Apply Martin Simmons' patch that should turn off the new API usage
256 when batch insert is turned off allowing building on older
258 kes Add ./configure search in qwt-qt4 for qwt package
260 kes Bacula is now free of 3rd party GPL copyrighted code!
262 kes Add guid_to_name.c/h which replace idcache.
263 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
265 ebl Detect if new PosgreSQL batch insert API is present.
266 kes Correct incorrect mempool call causing Director crash. Occurs on
267 systems without va_copy().
268 sb Update spec files for 2.2.1 release
270 kes Fix memory pool call in ua_output.c. bug #934.
271 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
272 Add test program to fnmatch.c
274 kes Integrate patch to README.vc8 from
275 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
276 edit it to get it into Unix patch format.
277 kes Implement mkpath.c to replace old FSF makepath.c
279 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
281 Release Version 2.2.1
283 kes Update POTFILES.in
284 kes Cleanup a few underquoted AC_DEFUNs in configure
285 kes Apply patch from Martin Simmons that adds a test for va_copy to
288 kes Fix bug #921 by increasing the number of tries to create a new volume
290 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
291 can be called multiple times. Implement a version for machines
292 without va_copy() that gets a big buffer.
294 kes Integrate more portable zone offset code into bsmtp.c
295 Submitted by Attila Fülöp.
297 kes Fix bad SD->FD return status reported by
298 (James Harper) <james.harper@bendigoit.com.au>
299 ebl Fix a bug in read_close_session which return random status
300 thanks to James Harper
302 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
303 and directory names during restore of single file/directories.
304 kes Add sanity checks to .sql command when string is empty. Hopefully
305 that will resolve Dirks Director crash.
307 kes Apply patch submitted by Martin Simmons that corrects a seg fault
308 in the bsmtp chat subroutine when debug is >= 10.
310 kes Fix Director crash when running bat SQL queries.
311 kes Add David's notes on Item 8: Copy pools.
313 kes Rework projects file to be current and ready for a vote.
314 kes Enhance lex scanner error message.
316 kes Tweak LICENSE file to mention BSD code.
317 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
318 if specified on the ./configure.
319 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
320 This class is intended to allow us to open a second bsock to the
321 Director while in the restore subdialog.
323 kes Fix configure to create bat Makefile before creating dependencies.
324 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
325 kes Add a tooltip to the tray monitor.
326 dvl Set the Director's PID file before dropping privs. This fixes
329 kes Update AUTHORs file
330 kes Increase the default max concurrent jobs to 20 in FD and SD to
331 correspond with the default .conf files.
332 kes Rewrite the Win32 service routines. This eliminates the 3 copies
333 some different, of the same file created by RN when porting the
335 kes Rearrange some of the Win32 directories and the placement of the files
337 kes Set DEVELOPER flag in version.h
339 ========================================================================
340 Release Version 2.2.0
342 kes Apply a second doc patch from Marc.
343 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
344 improves the tips section that discusses how to setup multiple
347 kes Update bat README file.
348 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
349 corrects a typo in the Recycle status check in db_find_next_volume().
350 This will probably fix a number of annoying problems with multiple
352 kes Modify most of dird/msgchan.c to use bsock class calls rather than
353 bnet calls -- no functionality change.
355 kes Modify the Verify output to specify if files are missing on
356 the Volume(s) or disk. Fixes confusion in bug #916.
357 kes When more than one Volume is read in a migration job, the last
358 Volume bytes reported are from the last read volume rather than
359 the last written volume. Fixed. This fixes bug #910.
360 kes Fix display of Recycle flag after update volume=foo recycle=yes.
361 It previously printed New Recyle flag is: no. This fixes bug
364 kes Correct seg fault when switching tape drives during restore.
365 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
366 be used until after 2.2.0 release.
368 kes Remove fnmatch() in SD that permitted wild card specifications.
371 kes Fix %g in filename returned by SQL for browse tree reported by
373 kes Fix configure so that it puts config.out in the cwd rather than
375 kes Attempt to fix the locking problem reported by Eric in bug #906.
376 kes Make berrno class to leave errno unchanged after constructor call.
377 kes Make bnet_server use the heap rather than the stack to allocate
378 its socket fd pointers to avoid a crash at termination. Problem
379 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
381 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
382 and putting it in depkgs-qt along with Qt4.3.
384 kes Rework code in acquire.c that switches drives for reading when
385 the Media Type does not match. This should fix bug #906
387 ebl Fix a director segfault during job setup #907
388 kes Correct seg fault in postgresql when first operation returns no
389 rows. Fixes Dirks File browser problem seg fault with bat.
391 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
392 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
395 kes Implement PopUp YES/NO dialog for bat.
397 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
399 kes Correct RunScript to terminate job in FD on failure.
400 kes Change abort_on_error and AbortJobOnError to fail_on_error
401 and FailJobOnError in RunScripts.
402 kes Minor tweaks of code formating in RunScripts, principally to
403 avoid depassing 80 columns.
405 kes Eliminate one #ifdef Win32 in bsmtp
406 kes Implement grow tool to grow a file for testing very large databases.
407 kes Add big-vol-test to test Bacula seeking with > 5GB.
410 kes Modify find_next_volume() to return all values in Media record.
411 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
415 kes Update Release notes
417 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
418 Warning, in previous beta version, all media get from scratch keep their
421 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
422 This should fix bug #842. Made a note to look at removing the temp
423 files at the end of the install.
424 kes Add ability to mount and unmount a file device providing it is
425 marked as being removable and has the appropriate mount and unmount
426 commands defined in the Device resource. This fixes bug #830.
427 kes When applying a storage override, release all previous storage
428 definitions rather than just prepending the new storage.
429 This should prevent a good deal of confusion.
431 kes Implement ./configure search for qwt libraries.
433 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
434 Win32 FD. This should fix bug #893.
435 kes Remove an unnecessary beep in Win32 init code.
436 kes Update copyright dates in Win32 executable about boxes.
437 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
438 code with a BSD getopt.c and getopt.h.
439 kes Remove sched.h from the Win32 compat directory -- not used.
440 kes Remove the Exit menu item from the Win32 tray monitor. If you really
441 need to shut it down, do it through the services panel or the command
443 kes Remove some inappropriate Bacula FSFE copyrights.
444 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
445 kes Fix regress config non-portable test as pointed out by
446 Florian Heigl <florian.heigl@gmail.com>
447 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
448 as pointed out by Florian Heigl <florian.heigl@gmail.com>
450 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
451 Reported by Frank Sweetser.
455 kes Fix client-only build.
456 kes Integrate client-only fixes for bsys (initgroups) and conio from
457 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
458 kes Make arguments to get_scratch_volume() in same order as other
460 kes Rework the prune_volumes() subroutine so that after purging and
461 no volume found in desired pool, it will check for a scratch
462 volume. This prevents recycling the whole scratch pool.
463 kes Add code to status storage to print boffset_t (largefile support).
465 kes Move qwt (Graphics libarary for Qt4) to depkgs.
466 kes You now need a --with-qwt=<dir> to be able to build bat.
467 kes Update src/win32/cats/bacula_cats.def to include the new
468 db_get_query_dbids() call on Win32.
470 kes Correct a problem when selecting a scratch volume and moving
471 it to another pool that lost some columns.
472 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
473 kes Enhance Autochanger error messages to include Volume and device name.
474 kes Rework prune_volumes() code to take account of InChanger flag,
475 and to handle recycling volumes going to the Scratch pool and
476 current pool because the RecyclePool directive.
477 kes Implement a better and more efficient db_get_query_dbids() to
478 handle creating and passing back a list of DBIds.
482 kes Start work on new more efficient DBId subroutine. First use
483 will be for recycling volume to Scratch inchanger.
484 kes Increase number of JobIds in pruning from 1000 to 10000.
485 This to be replaced by above routine.
486 kes Begin implementation of building Qt4 on Win32.
487 kes Correct typo in fix I added for bad TLS shutdown.
488 kes Pull 2.0.3 patches into patches directory.
489 kes Update Release notes. Include qt-console in line count.
490 kes Update Projects file.
492 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
493 bug in migration code where a job that spanned two volumes
496 kes Implement new BST_DESPOOLING blocked state. Change from locking
497 during despooling in SD to blocking. This means that other threads
498 can work with the device structure, in particular the reservations
499 system while despooling.
501 kes Fix return in reservation message queue that missed clearing
502 the jcr lock (implemented 26Jun07 below).
503 kes Rename a number of dev methods to make locking function names
505 kes Document locking in lock.c. Move lock structures to new file
508 kes Move reservations message lock to lock jcr only this
510 kes Move main SD locking code into lock.c (new file).
511 kes Update Win32 build to include lock.c
515 kes Dirk committed the qwt library code for drawing graphs in bat.
516 kes Tweak install of qwt so that it is integrated with ./configure.
518 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
519 out by Eric (my typo).
520 ebl Fix configure.in to get batch mode enable
521 kes Return correct string from authenticate.cpp in bat when connecting
523 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
524 spurious line drops when using TLS.
525 kes Do not file reparse points when restoring a file that already
528 kes Implement Windows reparse points -- similar to directories, but
529 we do not descend into it. This is a first cut. They seem to
530 be backed up, but restore is not yet tested.
531 kes Remove restore_blocking in tls code when shutting a socket to leave
532 it in blocking mode. Hopefully this will fix the encryption bug
533 reported by Frank Sweetser.
534 kes When opening a file for backup, tell the OS that we are going to
535 read it sequentially -- optimization.
536 kes Change variable names in authenticate_director() to not conflict
537 with member names in bat. Caused great confusion with compiler,
540 kes Queue openssl error messages in case of comm problem.
541 kes Do shutdown() call if socket terminated.
542 kes Remove some duplicated code in tls.c
543 kes Move more of the bsock member variables into private and access
545 kes Add Frank Sweetser's tls-test to the regression suite.
547 kes Add Swedish sv.po file
549 kes Don't print clock skew message in FD if less than 3 seconds diff.
550 kes Add a bit of VSS info to status client.
551 kes Implement a first cut of Vista VSS, using Win2003 code.
555 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
556 loaded tape but uses first drive).
557 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
558 This was indeed a Win32 issue.
560 kes Simplify search of autochanger for in-use Volume.
561 kes Fix exit condition of check for in-use volume. kes Remove
562 inappropriate my_postgresql_free_result() in db_close()
564 kes Fix bad return in FD when encryption signature not found.
565 Probably caused a crash.
566 kes Inhibit missing encryption signature error messages for
567 file types where no signature computed.
568 kes Correct inverted check on autochanger in reservation system.
569 kes Tweak debug code in autochanger reservation.
571 kes Add some additional locking in the cats directory in subroutines
572 that modify packet variables called from batch insert.
573 kes Rework how dcrs are allocated. new_dcr() can now be called
574 with an existing pointer, and it will simply clean it up.
575 This allows the reservation system to test various different
576 devices, and will permit easy device changes.
577 kes A bunch of changes all over to handle new new_dcr() calling
579 kes Work more on the Volume management in the SD. Remember Volumes
580 for tape drives and for autochangers (even virtual disk changers).
581 kes When looking at the Volume list to reserve a drive, handle
582 autochanger names correctly by interating through the changer
583 devices. Also call the Director to see if a Volume is suitable
585 kes Fix some bugs in bscan. Make sure all media records are written.
586 Make sure that valid JobMedia records are written for disk files.
587 Previously they were completely wrong.
588 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
589 that the URLs don't change and so that the developers will all
590 work off the same copy. Rebuild from scrach.
591 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
595 kes Fix seg fault in FD from incorrect digest size.
596 kes Fix argument to non-OpenSSL crypto.c subroutine.
600 kes Remove a few malloc()s from the encryption code.
601 kes Use the class calls to bsock in filed/backup.c and restore.c in
602 place of the old bnet_xxx code.
603 kes Implement code that does an on the fly calculation of the
604 signing digest during restore of encrypted files. It makes
605 a best guess at the algorithm, and if it is not correct, will
606 then revert to the old code which reads the file after it is
608 kes Implement at least one missing crypto stream in stream_to_ascii()
609 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
610 #877 where a reload with bad syntax causes Dir to exit.
612 Cut: 2.1.14 beta (not released)
614 kes Do not free a volume on a tape drive until another volume is
615 mounted and read, or the autochanger unloads the volume.
616 This should help the SD re-use volumes that are already mounted,
617 and should fix bug #886.
618 kes Apply patch from user brettedgar that allows gnome2-console include
619 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
620 kes Apply patch from Lucien Weller that fixes day of week calculation
621 because of DST flag problem. Fixes bug #887.
623 kes Move find_next_appendable_volume() to after acquiring a valid device
624 in reserve.c. This fixes bug #864 -- confirmed by reporter.
626 kes Unable to reproduce bug 872. However added additional testing for
628 kes Bug #874 resolved by documenting SQLite limitations.
629 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
630 kes Bug #881 resolved by removing typo in mtx-changer script.
631 kes Made Frank Sweetser's wiki the official Bacula wiki with his
632 approval. Added a link to the wiki on the web page, and implemented
633 a backup from http://paramount.ind.wpi.edu
635 kes Fix update allfrompool to pass pool name.
637 kes Convert to pure GPL v2 license.
638 kes Fix sscanf problems reported by Peter Buschman that caused
639 a bus error on Solaris.
640 kes Rework (simplify) the select prompt in bat.
641 kes Move get_jobid_from_tid() into lib and create a
643 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
644 should definitely fix the problem of lost error messages in the
646 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
647 kes Eliminate tcpd.h from the project. Enclose the #include from the
648 library with extern C ...
649 kes Add print of signal name when a signal is trapped.
653 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
655 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
656 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
657 makes SQLit3 run 30 times faster, though a bit less safe.
658 kes Implement --with-batch-insert in configure and detection of thread
659 safe libraries. It is on by default, but turned off if no thread
660 safe library (e.g. SQLite 2) is available.
662 kes Fix Bacula PostgreSQL buffer overruns.
663 kes Do better checking for NULL results returned from PostgreSQL;
664 implement retry for failed queries; clear results buffer after
665 failed query. Hopefully this will correct the PostgreSQL failures.
667 kes Implement algorithm to handle only one appendable volume with
668 Prefer Mounted Volumes = no.
669 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
670 returned from a query.
671 kes Make volume lock recursive.
672 kes Implement an additional volume reservation algorithm that
673 starts by considering all reserved volumes then uses the
674 old brute force algorithm of searching the resources to
675 find a suitable device.
676 kes Add new reservations debug code and refine the old code.
677 kes Update the win32/dll/bacula.defs file.
679 kes Tweak reservations algorithm to permit a few more cases, i.e.
680 volume reserved, but on different drive, ...
681 kes Enhance SD status to include Pool and Media Type for drive in a
682 more readable format (a bit longer).
683 kes Fix PostgreSQL double free.
685 kes Minor refactoring of restore decryption code.
686 kes Add code to smartall.c to detect double free of a buffer.
688 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
689 so that bsmtp will create a correct email address (mailbox only).
690 kes Modify 'memory' command so that the buffers are listed as 'In use'
691 to avoid confusion with Orphaned buffers.
692 kes I reworked the OpenSSL include/lib flags to be handled in
693 the standard Bacula way, which should fix bug #863 concerning
694 non-standard OpenSSL libraries.
696 kes Implement Help Browser window for bat.
697 kes Fix reload bug that reset StorageId to zero.
699 kes Fix TLS #ifdefing when TLS turned off.
700 kes Ensure that when labelling a tape with Slot=0 that InChanger
702 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
704 kes Add StartTime to final uar_sel_jobid_temp query so that we can
705 add DISTINCT (required by PostgreSQL).
706 kes Implement BSOCK authenticate_director() method. Eventually will
707 authenicate all daemons.
708 kes Move several more functions into the BSOCK class.
710 kes Add code to tell the OS that we no longer need a cached
711 file that we were reading. In findlib/bfile.c. Also,
712 only cache files that we are reading. Thanks to
713 Tobias Oetiker <tobi@oetiker.ch> for the idea.
714 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
715 kes Implement script to automatically generate cats and dll .def
717 kes Update README.mingw32 to include new .def file generation.
718 kes Correct typo in UTF-8 error message as reported by:
719 jhernandez <julianhernandez@gmail.com>
720 kes Add additional sm_check() code on debug level 1.
721 kes Set default debug level to 1.
722 kes Trap SIGABRT in attempt to get traceback.
724 kes Reduce bat connect timeout from 30 to 15 seconds.
725 kes More restructuring and implementing BSOCK class in place of
727 kes Remove a few unnecessary malloc() tests in crypto code.
728 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
729 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
730 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
732 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
734 kes Fix Verify InitCatalog. The attributes were not pointing to the
735 correct saved location.
736 kes Implement message callback so that GUI is sure to get all
737 daemon messages. Currently displayed in a dialog in bat.
738 kes Ignore SIGUSR2 (Bacula timer) in bat.
739 kes Apply regress patch from bug #859 to allow regress to work
740 with Solaris compiler.
742 kes Begin adding TLS support to bat.
743 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
744 clean up lex.c and make it more readable.
746 kes Move more bnet functions into the BSOCK class.
747 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
748 kes Complete change of berrno strerror() method to bstrerror()
752 kes Cleanup incorrect email addresses in bsmtp.
753 kes Make bat display initial messages rather than discard them.
755 kes First cut of adding .mod to the run command.
756 kes Implement auto display of messages in bat.
757 kes Enhanced preferences to allow all Bacula output to be
760 kes Try to make bsmtp date routines more generic.
761 kes Fixed bug #856 autochanger documentation.
762 kes Rework bsmtp date editing for Win32. This fixes bug #854.
763 kes Add new cats entry point so Win32 builds.
765 kes Attempt to fix bsmtp date editing on OSes without %z editing.
767 kes Do better checking for the MySQL 64 bit libraries looking for both
768 .a and .so libraries.
769 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
770 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
771 kes Require the thread safe version of MySQL during configure. Thanks
772 to Andre Noll for pointing this out.
773 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
774 continuing in migration code.
775 kes Apply implementation of tray-monitor font derived from gnome-console
776 submitted by Andreas Piesk <a.piesk@gmx.net>
778 kes Eliminate important memory loss in SQLite
779 kes Fixed the batch insert MySQL thread specific data that was not
780 being freed. See cats/mysql.c:db_thread_cleanup().
781 kes Fix restore before command.
782 kes Convert old hdr.name to name() in a few places.
783 kes Implement update jobid command.
784 kes Return all time_t dates in db_get_job_record()
785 kes Stop watchdog in SD earlier.
786 kes Put Pool just after Storage in please mount message.
787 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
790 kes Update the po files.
791 kes Fix Verify InitCatalog by making it cache attributes.
793 kes Change name bacula-bat to bat for man 1 page to correspond to
795 kes Check for client and store NULL pointers in status command. This
797 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
798 kes Fix sign extended editing of %p.
799 kes Clean out a little old #ifdefing in cats/mysql.c
801 kes If time diff between DIR and FD is more than 600 seconds convert
802 INFO message to WARNING.
803 kes Implement heap size display in status for all daemons.
804 kes Attempt to fix MySQL db open memory loss (not successfull).
805 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
806 kes Eliminate memory loss in MySQL (possibly other SQLs) during
807 Query. This looks like a MySQL but but by doing extra releases,
808 the memory goes away. This should fix bug #847.
810 kes When backup fails, cancel SD before waiting for sd termination.
811 kes If SD is waiting for FD to connect during cancel, wake up the
813 kes Fix fsf code so that errno is correctly reported.
814 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
816 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
817 so that Bacula doesn't later stumble into a seg fault.
818 kes Use the term Restore Client in the restore Job report.
819 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
820 the original job's FileSetId.
821 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
822 spooling in migration jobs. Not yet tested.
823 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
824 reading conf file from a pipe. However, do it with open_bpipe()
825 rather than popen. Not yet tested.
827 kes Fix an ugly bug where the VolCatBytes were getting updated
829 kes Implement bconsole memory command that prints current memory
830 usage, plus smartalloc dump.
831 kes Clarify some error messages in backup, admin, and migrate.
832 kes Shrink label dialog to smaller size.
833 kes Invert Cancel OK buttons on restore to be OK Cancel.
834 kes More strerror() to bstrerror() conversions.
836 kes Start implementing bstrerror() in place of strerror().
837 kes Stripping path -- seems to work.
839 kes Prevent door and port files from being restored (mostly
841 kes Free an unreleased buffer in compat code.
842 kes Change console Job name from *Console* to -Console- to eliminate
843 Win32 filename problems. Put Win32 path separator when creating
844 Console file. This fixes bug #846.
845 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
847 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
849 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
850 to force Win32 error message.
852 kes First cut strip path. The data should be passed to the FD,
853 but nothing is done with it yet.
854 kes Enhance the digest and signature routines in the crypto
855 library to accept a JCR and to use it to print error messages
856 so that they will go in the Job report rather than the daemon's
858 kes Simplify some of the verify signature code.
859 kes Simplify a few of the alternative returns in the signature
862 ebl Use only POSIX regex instead of GNU regex in breg.c for
863 File relocation. It fix broken freebsd compilation.
864 kes Convert all other Dir files to use new ua class message
866 kes Tentative fix for missing digest signature in bug 807.
867 kes Correct handle problem in new win32_ftruncate routine.
868 kes Convert ua_purge.c and ua_update.c to use new ua class
869 message routines for bat.
871 kes Correct incorrect installation of LICENSE in Win32 installer.
872 kes Display LICENSE at the beginning of the Win32 install.
873 kes Attempt to correct the need for the png files to be installed
875 kes Reapply my bat.conf install script in qt-console. I think I
876 editted bat.pro instead of bat.pro.in and it was lost.
877 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
878 the /var/lock/subsys for subsysdir. Also corrects typos in the
881 kes First cut update job.
882 kes Correct configure to include qmake of src/qt-console directory.
884 kes Make restore job yes/mod/no print in one command so GUI works.
885 kes First cut implementing backup and restore client.
886 kes Correct editing in Verify output that caused a seg fault.
888 kes Insure that bat.conf is not overwritten during installation.
889 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
890 while I was implementing migration in March 2006 !
892 ebl Cleanup file relocation, using char *RegexWhere instead of
893 char *where + bool where_use_regexp
894 kes Update some manpages and add bat manpage.
895 kes Make a first cut at converting bacula.spec.in for bwx-console
897 kes Apply patch from John Goerzen to add hostname as fourth argument
898 to make_catalog_backup script.
899 kes Fix typos I introduced into bsmtp.c
900 kes Make pm_strxxx() routines handle input of NULL pointer. This
901 is to protect from NULL pointers returned from SQL databases.
902 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
903 kes Add more debug to FIFO code -- fix fifo regression test.
905 kes Implement posix_fadvise in FD, and for reading spool files in SD.
906 kes Add thread timer to bnet_connect() to break from OS if wait time
909 kes Update Win32 build to include new files, new symbols, and
911 kes Implement socket level heartbeat (tcp_keepidle)
912 ebl Commit File relocation patch
913 kes Make bat have 'make install' target.
914 kes Warn during install if old gnome-console binary found.
915 kes Warn during install if old wx-console binary found.
916 kes Add -8 option to bsmtp command line to add content type utf-8.
917 Fixes bug #809. (Character coding problem in bsmtp).
918 kes If < is found in target (from, to, cc) then do not enclose the
919 target in < > in bsmtp. Fixes bug #772 (malformed address).
920 kes When printing certain items in dbcheck, stop after 300000.
921 Fixes bug #822. (dbcheck loops).
922 kes Incorrect status in Dir after waiting for mount with poll set.
925 kes Extend idea of Prefer Mounted Volumes to mean a volume about
927 kes Print waiting to reserve a device every 5 mins.
929 kes Don't call close_part in label.c if tape and relabel.
930 kes Don't free volume if busy in close() -- should help with
932 ebl Fix #824 RunScript bug (After script could be execute twice)
933 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
934 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
935 Add a regression script to test RunScript
937 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
940 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
941 deprecated. No additional bugs will be fixed, and they will be dropped
942 in a future release (probably 2.4.0).
943 kes Change name of wx-console to bwx-console to make it more Bacula
945 kes Change the name of gnome-console to bgnome-console to make it
948 kes Some time in March, a Feature Request with patch from Jorj Bauer
949 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
951 The ability for the director to validate a Client (FD) CN against
952 an arbitrary set of patterns rather than the hostname, with
953 A new 'TLS Allowed CN' set of directives which are implemented
954 in the Client resource. Then pattern matching is used in place
955 of hostname matching against the Certificate's CN. As an example, we
956 have certificates which (a) use a local CA, and (b) have a CN of the
958 kes Add new/changed entry points to Win32 build
959 kes Create unaccepted-projects for projects that are not accepted.
960 kes Simplify locking in the reservations system.
961 kes Add more debug code in reservations.
962 kes Make sure error condition on reserving a volume is handled correctly.
963 kes Correct handling of volume_in_use.
964 kes Correct handling of initializing a device.
965 kes Move handling of broadcasting releasing a device into release_device().
966 kes Correct attaching dcr to dev so that it is only done if device
967 is properly initiated.
969 kes Locking debug level tweaks in SD.
970 kes Tweak new Volume code.
972 kes Add exec external-command [wait-seconds] to bconsole. This
973 executes the external-command. Note! normally external-command
974 should be enclosed in double quotes.
975 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
976 it should normally be off in a production system.
978 kes Implement die command for SD so that we can force it to dump.
979 kes Implement SD lock debug code.
980 kes Implement new algorithm for keeping Volume list in SD. It
981 is now owned by the device.
983 kes Implement new code for freeing in use volumes that should
984 resolve if not all, some of the problems of multiple drive
985 tape conflicts described in bug 801.
987 kes Fix gui/bacula-web/images files in svn.
988 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
990 ebl Fix a bug in batch mode (in string escape)
991 kes Correct migration prune SQL typo that crept in in a
994 kes Move bnet_despool() into class in bsock.c
995 kes Modify job report to include director name and Build OS.
996 kes Move drop root privilege and check_catalog() before fork.
997 kes Add update database scripts (version 9 to 10) to updatedb directory.
999 ebl Check size and age of each file after its backup to see if
1000 it has changed during backup, if 'checkfilechanges' is set.
1001 The FD will do an extra check (stat(2)) after
1002 each file backup. mtime, ctime and size are compared with
1003 'before backup' information. If time or size mismatch, an
1004 error message will be generated. You must upgrade FD to use it.
1006 kes Make database name and user configurable
1007 --with-db-name=xxx --with-db-user=xxx
1008 kes Add back database type to message.c for debugging.
1010 kes Implement dir_sql() which issues an SQL query.
1011 kes Modify bat medialist to use dir_sql() and do some minor C++
1012 formatting as well as eliminating a number of pointers, simplifing
1015 kes Fix some of the mtx-changer grep commands for tape label readers.
1016 kes Convert a number of bsendmsg into the appropriate send/warning/error
1017 message class calls.
1018 kes Suppress the using database message in the .sql command.
1019 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1021 kes Add context menu for floating a window.
1022 kes Some minor cleanup and name changes in qt-console
1023 kes Add doing mt setblk 0 in Win32 mtx-changer.
1024 kes Apply Martin's bug fix to move definition of ENODATA for
1026 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1027 sqlite2 and sqlite3.
1029 kes More pruning cleanup.
1030 kes Turn on wait_for_drive by default in mtx-changer.
1031 kes Turn on Batch insert code by default as it now passes regression.
1032 kes Add ./configure --enable-bat to enable building of Bat.
1033 No install yet though.
1035 kes Implement a new .sql command for bat.
1036 kes Implement code to turn off pruning in obtaining the next volume.
1037 Pruning is turned off for the status dir command, but turned on
1038 for SD requests and for the list nextvolume command.
1040 kes Correct Qmsg() that was not updated correctly when committing a
1041 previous change (probably the recent TLS patch).
1043 kes Write new subroutine is_volume_purged() that explicitly checks
1044 if the Volume is purged, and if so marks it as such. This should
1045 resolve problems reported about needing to mount twice to recycle
1047 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1048 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1049 amount of duplicated code.
1050 kes Do volume pruning only for the Media Type desired (reduces pruning time
1051 if multiple Media Types are in the same pool).
1052 kes Implement more detailed info in the Job report for the Bacula version
1054 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1056 ebl Add bbatch tool to bench database and insert mode.
1057 Fix sql quote stuff in batch mode
1058 Fix sql stuff for mysql
1060 kes Correct problems with am/pm scheduling. Fixes bug #808.
1061 kes Implement new prunning code that prunes up to 1000 jobs at
1062 the same time. The same technique can be applied to a number
1063 of other prune/purge subroutines.
1064 kes Add an insanity check when starting a new tape job to ensure
1065 that the tape position has not been changed. If so fail the
1067 kes Fix Win32 build for dlls to add the folllowing:
1068 src/lib/bsock.c -- new file with new entry points
1069 src/lib/dlist.c -- new entry points
1070 src/cats/sql_create.c -- new entry point
1071 src/cats/sql_cmds.c -- new DATA item exported
1073 ebl batch mode cleanup bscan-test is ok now.
1074 kes Implement SD code to check length of disk volume before appending.
1076 kes Correct return status on db_batch... routines.
1077 kes Add call to db_write_batch_file_records() to migration code.
1078 ebl Fix AfterJob timing
1079 kes Move the checking of the database in initializion of the Director
1080 to after we drop privileges. This avoids the need for both root
1081 and bacula access to the DB.
1082 kes Correct a misplaced variable definition in src/filed/backup.c
1083 kes Correct how the new batch insert db_create_attributes_record()
1084 uses the arguments. Caused a seg fault in bscan.
1085 kes Implement lock() and unlock() methods in DEVICE class.
1086 Implement block() and set_block(xx) methods in DEVICE class.
1087 kes Modify bnet_connect() so that it uses time() to check for the
1088 wait time expiring (on some OSes, some system calls may not
1089 return immediately).
1090 kes Modify Verify to obtain the previous JobId when it is actually
1091 running rather than at schedule time (as it was in 1.38.x).
1092 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1094 kes When checking pid in pid file, continue running if the pid is
1095 the same as ours. This occurs on IRIX after a system crash.
1098 kes Extend new GUI API.
1099 kes Make the ua structure a class, and implement send_msg(),
1100 error_msg(), warning_msg(), and info_msg().
1102 kes Apply fix from for building wx-console on the Mac from
1104 kes Implement new select mechanism for GUI programs.
1105 kes Reorganize initialization of stackedWidgets in bat.
1107 kes Add updated nagios plugin supplied by Christian Masopust.
1109 kes More bat implementation.
1110 kes File migrate bug with Pool Occupancy using mediaid instead
1111 of jobids. Fixes bug #795.
1112 kes Fix orphaned buffers in filed backup and verify due to
1113 crypto buffers not freed during errors. Fixes bug #789.
1114 kes Extend new GUI api code to tree commands.
1115 kes Ensure that tree and dot commands check console ACLs.
1116 kes Permit marking directory with trailing slash.
1117 kes Allow 20 console connections (instead of only 10).
1119 kes Add smartctl call to bacula-sd.conf as an example of getting
1122 kes Modify jobq.c to let simultaneous restore jobs run. This may
1123 cause them to fail if they cannot get a drive.
1124 kes Add Client Connect Wait to Storage daemon to permit users to
1125 modify the time the SD waits for a FD connection.
1127 kes Correct virtual changer check which was backwards. This caused
1128 volumes to be unloaded into slots already occupied.
1130 kes Apply Command ACL filter to JobId list in restore command.
1131 kes Correct typeo in var.c patch.
1133 kes Don't let Bacula prune File or Job records for the current Job.
1134 kes Fix variable substitution pad + inc bug reported (with patch)
1137 kes Correct SQLite log table index as reported by Luca Berra.
1139 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1141 kes Begin implementing new comm signals for API.
1142 kes Fix a few places in lib/message.c where the open fd may
1144 kes Continue implementing lib/bsock.c (real class). Make jcr,
1145 who, host, and port private. There are new methods to access
1146 them for non-class use. This required touching a number of files.
1148 kes Add LANG=C to autoconf/randpass so it works with languages other
1149 than English. Fixes bug #788.
1151 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1153 You will not be able to generate Include/Exclude list any more.
1154 It will be fixed soon.
1155 If you want to use this, you can apply
1156 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1158 kes Restore of sockets created false error messages because Bacula
1159 no longer restores sockets, but the code was still trying to
1160 set the attributes on a non-existent file. Reported by a user.
1161 ebl finish RecyclePool feature
1162 Media will takes Pool.RecyclePool
1163 when moving from Scratch to a Pool or when user will do
1164 update volume=xxx frompool
1165 To use it, add RecyclePool = aPool to your Pool resource
1168 RecyclePool = Scratch
1172 kes Expand new BSOCK class adding signal() and new BNET signals.
1173 kes Begin enhancing the dot commands adding a new API function
1174 that returns more information and will make it easier
1175 to interface to the Director from a program.
1177 kes Make DEVICE fd private. Its new name is m_fd, and can be
1178 obtained with dev->fd() outside the class. This is the
1179 first of many DEVICE members to be made private.
1180 kes Implement Michael Renner's idea on having a virtual disk
1181 changer. I made some minor modifications (e.g. I did not
1182 implement the Virtual Changer directive, but simply set
1183 the Changer Command to an empty string.
1185 kes Implement a BSOCK send() method that writes the whole record
1186 in a single write() request rather than in two.
1187 ebl add update volume=xxx recyclepool=yyyy
1188 volume takes recyclepool from pool when using update volume=xxx from pool
1190 kes Fix encryption deblocking bug, which caused some restored files
1191 to be truncated. This fixes bug #763.
1192 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1193 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1195 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1196 ebl Use btime_t instead of uint64_t in media patch.
1198 kes Optimize the use of the database a bit in the Status dir command.
1199 Only open it when needed, ensure that if any previous database
1200 was opened, it is closed.
1202 kes Correct VolCatBytes bug from media patch.
1203 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1204 in the case of orphaned records.
1205 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1206 and File records in 300K chunks to be more efficient. This
1207 idea came from Juan Luis Frances (if I remember right).
1208 kes Apply Eric's scratch patch that moves a purged Volume to
1209 the RecyclePool. Question: how is RecyclePool set? what
1210 happens to the ScratchPool?
1211 kes Apply Eric's media patch that collects read/write media
1212 times as well as byte counts. This patch requires a
1213 simultaneous upgrade of the DIR and SD. Note, there
1214 should be some way to turn off timing. I'm not sure
1215 times are in Bacula units.
1216 kes Apply Eric's batch-insert patch.
1218 kes Update projects list.
1220 kes Implement Include/Exclude file lists in FD as dlists using
1221 the new dlistString class. This permits efficiently having
1222 large include/exclude lists and completes project Item 25.
1223 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1224 console is authorized to cancel the job. This fixes bug
1226 kes Modify SD so that the VolCatJobs medium record is updated
1227 at the beginning of a Job rather than the end. This
1228 fixes bug #775 where exceeding MaxVolJobs caused jobs
1230 kes Added a mutex around getting and setting Volume information
1231 so that multiple simultaneous jobs will single thread.
1233 Switch to using Subversion
1234 kes Remove src/pygtk-console/ from configure
1236 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1237 plus the entrypoints.
1238 kes Apply patch supplied that corrects debug print
1239 in canceling jobs for max run time. Supplied as
1240 part of bug #621, which was previously fixed.
1242 kes Test on job_canceled() and sd_msg_thread_done inside
1243 loop starting the message thread to avoid a race condition.
1245 kes Remove rl_catch_signal from console.c as it conflicted
1246 with the header definition. Fixes bug #765.
1247 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1249 kes Clarify some stored/acquire messages to indicate if the
1250 problem is with read or append.
1252 kes Fix memory leak with storage ids in cats/sql_get.c
1253 kes Terminate watchdog earlier to avoid reference to released
1254 memory -- reported by Jason Austin.
1255 kes Move closing the database from jobq.c to the director daemon
1256 termination routine. This fixes memory leaks for shadow jobs
1257 (i.e. migration jobs).
1258 kes Free up the unique jobid chain items in migrate.c. This fixes
1259 a memory leak problem.
1260 kes Convert some ugly looking for statements to use foreach_alist
1261 in findlib/find.c. This will facilitate converting the structures
1262 to use dlist (for large include/exclude lists).
1263 kes Fix a bug in the btree.c and btree.h routines, then rename them
1264 rblist and add them to be built in src/lib. Include some new
1265 methods written by Rudolf Cejka that make the code more readable
1266 (hides some of the ugly casting).
1267 kes Add set_next() and set_prev() methods which make the code much more
1268 readable. Also add a new dlistString class that facilitates storing
1269 strings in dlists. To be used in the large include/exclude lists.
1270 kes Make some trivial modifications to lib/tree.h that use rblist
1271 rather than dlist for storing the tree links. This was suggested
1272 by Rudolf Cejka. The result of this is that the restore tree now
1273 uses red-black binary trees rather than simple linked lists. This
1274 should give rather dramatic speed improvements for directories
1275 contining large numbers of directories/files (more than 10000).
1277 kes Fix maxruntime bug #621.
1279 ebl Implement the include JobID in spool file name project.
1280 kes Reorder projects file in order determined by Jan 2007 vote.
1281 kes Implement item #12 on project list -- quick release of FD by
1283 kes Fix open of SQLite3 db where user does not have write permission
1284 so that DIR does not crash. Fixes bug #761.
1286 kes Add back missing @ in Win32 Makefile.
1287 kes Change 'Device not configured to autolabel' from INFO
1289 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1290 which should restart an indefinite # of times.
1291 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1292 other DIR specifications.
1294 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1295 Fix path quoting in SQLite scripts.
1296 Fix problems with SHGetFolderPath.
1298 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1300 kes Fix Job restart on error bug that promotes an Inc to a Full
1301 backup. This should fix bug #755.
1302 kes Add qt-console and first cut of code.
1306 kes Fix Bacula->Documentation link on Win32 to point to index.html
1307 instead of bacula.html. Fixed bug #750.
1308 kes Return JobId in db_get_job_record() when JobId==0. This should
1310 kes Do not release source pointers when restarting a failed job.
1312 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1313 This *should* fix bug #747.
1314 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1317 kes Modify USTORE constructor to set an empty store_source string,
1318 and don't copy the store_source string in a cancel. Hopefully
1319 this will fix Arno's seg fault, bug #744.
1320 kes Add back code to disable conio in configure. Fixes bug #743.
1321 kes Correct the Options scanner in the FD to correctly handle
1322 SHA1 option, which was eating the next option. Reported by
1324 kes Add code to indicate when the SD is spooling, spool wait, and
1325 despooling as requested by Alan Brown.
1327 Version 2.0.0 released: 4 January 2007