1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Fix small segfault in bacula-sd when debug level is 500
29 kes Modify run_program() and run_program_full_output() to use
30 call by reference for the results string. This corrects a long
31 standing problem where the address of the string may be changed
32 in the subroutine but not in the calling program.
34 kes Re-enable code to remember last volume mounted on a non-tape
36 kes Add patch supplied in bug #1068 that fixes a SD crash when using
37 a Virtual autochanger.
38 kes Generate correct JobMedia records during spooling/despooling when
39 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
40 <tih@hamartun.priv.no> for excellent analysis and testing.
42 kes Tweak hash algorithm for htable using Martin Simmons idea
43 for doing a circular shift.
44 kes Remember what volume is in VTLs (previously turned off for
46 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
47 pointed out some problems in creating JobMedia records during
48 spooling with concurrent jobs. Fix the problem by updating the
49 start file position before despooling and generate a jobmedia
50 record at the end of despooling.
52 kes Fix handling of JobMedia records during spooling and when a
53 Volume is changed without actually writing data to the Volume.
55 kes Implement bsock code to permit locking. Use the new code in Verify
56 in the FD to prevent the heartbeat thread from disrupting the Verify
58 kes Modify SD locking to eliminate locking the reservations system from
59 outside the system. Use the volume lock when getting media data
60 and reserving a new volume at end of media.
61 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
62 when SD starts are not locked into place.
64 kes Fix error compiling runscript code on 64 bit machines.
65 kes Tweak Win32 mount point code.
66 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
67 cleared giving bad file estimate).
68 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
71 kes Keep Schedule run lists in order as suggested by
74 kes Implement autostart scripts for Debian.
75 ebl Implement upgrade catalog scripts.
77 ebl Apply jobstat patch for long term statistics. Have to implement
78 purge stats command and upgrade scripts.
79 kes Fix mtx-changer.in for broken Debian mt program.
81 kes Fix large number of JobMedia records reported by Eric Bollengier.
83 kes Apply doc fix from bug #1062.
84 kes Resolve crash and improper restore wx-console Win32 restore
86 kes Update Win32 wxWidgets to latest version.
87 kes Attempt to do correct handling of Win32 mount points. Should
89 kes Fix Win32 FD backup/restore memory leak due to improper termination
90 of BackupRead/Write. This fixes bug# 1038.
92 ebl Reduce memory usage for accurate backup, working only with ctime
93 and mtime. (not all Lstat field)
94 About 40MB for my linux system (400.000 files)
96 kes Add dcr->reserved_volume flag that allows us to release a volume
97 even if it is not vol->released. This allows maxvol2 to work when
98 Volumes expire and we are already writing to the device (i.e. a
99 volume is pulled out from under us by another job terminating after
100 we reserve the drive).
102 ebl Permit multiple command/console per runscript definition.
103 RunScript { command = /bin/true ; command = /bin/false ... }
104 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
105 (restart an application) just after the VSS snapshot on windows.
106 kes Don't zap dcr values during release_volume() as they might
107 have the next Volume to be mounted.
108 kes Fix AIX prototype.
110 kes Second cut of drive switching during backup.
113 kes Update Win32 version of wxWidgets to most recent version.
114 kes Tweak Copy job details.
115 kes Rework dir_find_next_appendable_volume to make a bit more effort
116 to find a suitable volume before giving up.
118 kes Make ask_sysop_to_create... to return if waken from wait.
119 This helps get out of blocked conditions.
120 kes Experimental implementation of switch_device in reservations.
121 kes Implement FD version to allow easier protocol changes.
122 kes Add Plugin Options string -- not yet passed to FD.
123 kes Implement PluginOptions ACL.
125 kes Attempt to correct problems with restores with autochangers and
126 use counts going negative
127 kes Rework SD status command and implement API for bat. Implements
128 header, runing waitreservation, devices, volumes, spooling,
129 and terminated status keywords.
130 .status storage=xxx <keyword>
131 kes Clarify TLS error message by adding double quotes around name.
132 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
133 kes Pass jcr to tls routines so debug messages can be handled better.
134 kes Rework jobq resource allocation code, and possibly fix a bug
135 that caused reference counts to get out of sync.
137 kes Rename fd/dir plugin to use Bacula standard underscore.
138 kes Plugin work -- bring dir up to fd level.
139 kes Start implementation of VTL code
140 kes Fix Win32 build after adding new cats subroutine.
142 kes First cut at Duplicate Job implementation.
144 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
145 kes Start PluginOptions string, and refactor a bit of ua_run.c
146 ebl Apply Allan patch that permit to reset recyclepool.
148 kes Test patch -- possible fix or improvement for bug #1053
149 kes Refactor FD and SD status commands to permit new API code in
150 SD, and to fix Win32 build.
151 kes Win32 build is now working.
153 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
154 some ideas in patch from Scott Bailey.
155 kes Begin implementation of duplicate Job control.
156 kes Fix some of Win32 build after recent additions.
157 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
158 which causes the FD to detect whether or not the OS has the
159 honor no dump bit (*BSD systems), and if so, to skip backing up
160 any file with this bit set. The feature is enabled by setting
161 'honor no dump flag = yes' in the Options section of a FileSet.
163 kes Correct po warning message with datarootdir
164 kes Implement more code in dird.c to put configuration parsing in
165 a class rather than use globals.
166 kes Restructure SD status command for implementation of bat API
169 kes Suppress incorrect 'Will not descend from x into y' messages.
170 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
171 daemon globals used by parser.
172 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
174 kes Fix free of plugin_list when none exists.
176 ebl Apply accurate project patch.
178 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
179 on non-mempool object)
180 kes First cut of converting FD .status to work with bat API.
182 .status client=XXX header
183 .status client=XXX running
184 .status client=XXX terminated
185 kes Implement first cut of Copy Job.
186 kes Implement Catalog in Pool resource. It overrides catalog specified
187 in the Client resource.
189 kes Apply patch (with some difficulties) from Joao Henrique Freitas
190 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
192 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
193 ftruncate() actually works. In the case of some (cheap) NAS devices,
194 it does not, and so recycling NAS Volumes does not work. The code
195 simply unlink()s the file, then recreates it. This fixes bug #1011.
197 kes First incomplete cut of big malloc blocks for htable.
198 kes Tweak plugin code.
200 kes Plugin debug code + tweak a couple bat dialog layouts
202 kes Fix creating first JobMedia record during Migration to include
203 proper index. This caused slow restores of migrated jobs.
204 kes Temp fix to plugin name file_index.
205 kes Bacula backed up and restored a MySQL database.
207 kes Implement plugin restore.
208 kes Implement parsing of db_driver to give db_type index.
210 kes First cut of plugin restore code.
211 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
212 and do not strip paths on symbolic links.
213 kes Set catalog backup database and user name from values specified on
214 the ./configure line.
215 ebl Fix #1031 about wrong pool source information in job report.
218 kes Remove a redundant jcr argument to find_files, match_files, and
220 kes Implement '.status dir header|scheduled|running|terminated' that
221 prints the requested status section. With the exception of the
222 header, the other reports have fields separated by tabs (\t).
224 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
225 a resource embedded run command to find a since time if no explicit
226 since time was supplied on the command line.
227 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
228 that updates the state file at job termination time in addition to
229 when the daemon terminates.
231 kes First version where a plugin did a backup.
232 bpipe-fd.so created a backup file, wrote a test
233 string to it, and Bacua could restore this fabricated file.
235 kes Implement DB Driver = string for the DBI driver.
236 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
237 kes First cut of code for loading Win32 plugin dlls. Implement
238 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
239 and implement a dlfcn.h file based on opengroup's definitions of
242 kes First cut plugin directives.
244 kes Apply patch from bug #1049 to prevent stripping the path on a
246 kes Attempt to fix bug #1047 where stripping a path corrupts the
247 heap. Waiting for feedback.
248 kes Correct the Mount message not to suggest labeling a new tape
249 when doing a restore. Submitted by email by John Stoffel.
250 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
251 FD by using casting. Reported in bug #1042.
253 kes A bit of crypto cleanup. More later.
255 Release Version 2.2.8
257 kes Apply patch from Martin to correct bug #1040, bscan sets existing
259 kes Fixed important spelling error in doc -- bug #1045.
261 ebl Fix bextract to be able to extract non-portable Win32 data to
263 kes Move initialization of read/write res lock earlier in the code.
264 This fixes the crash with a null conf file. This fixes bug
266 kes Redefine CURES in lib/parse_conf to be URES and move it all
267 into lib/parse_conf.c -- this responds to bug #1042, but does
268 not fix it. The fix is not to compile with FORTIFY_SOURCE.
269 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
270 the trunk SVN. I don't think this was reported as a bug.
272 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
274 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
276 kes Add DataDespooling and DataCommitting status (committing is
277 the last despooling).
278 kes Finish implementation of new reservations code noted below.
280 kes Fix bsnprintf for float point numbers. I broke recently when
281 parameterizing some variables. This fixes bug #1036.
282 kes Undo recent reservations changes ... will apply them later
283 when they work better.
285 ebl Fixes #1034 which cause mysql to hang the connection after 8h
286 ebl Change default statistics target of filename.name and path.path
287 fields for PostgreSQL. This speeds lookup by indexes. Thanks
289 kes A few more tweaks to new reservation code. Make sure to clear
290 vol released flag when retaking volume. When reading label and
291 label is bad mark volume unused. When recycling, mark volume
292 unused so it can be renamed.
294 kes Fix reserve_volume() so it doesn't release a volume in use
295 (i.e. a volume entry not marked released). This should be
296 the last part needed to fix bug #1018.
298 kes Move Heartbeat documentation from Job to Director resource.
299 This fixes bug #1033.
301 kes Fix existing switch drive SD code to call autochanger to release
302 any old volume. This must be done to keep the autochanger from
303 releasing subsequently newly reserved volumes in doing a close().
304 This should fix bug #1018.
305 kes Fail if attempting to get console input in batch mode. This
306 should help fail RunScript console commands that are incomplete.
307 kes First cut implementing switch_drive() in SD (not actually called).
309 kes Implement first cut running console commands in a RunScript.
311 ebl Fixes bug #1028 where 'Selection Type' option was not usable
313 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
316 Release Version 2.2.7
318 kes Add new free_tls() entry point so that Win32 builds.
319 kes Fix compile warning in src/lib/util.c
320 kes Fix entry point for edit_job_codes() so that Win32 builds.
321 kes Fix seg fault Frank Sweetser reports in regression testing
322 on his systems. The problem was that the original author of
323 bsnprintf.c did not take into account the side effects of
324 using ++x in the argument to a #define.
325 kes Make SD protocol backward compatible with version 2.2.x.
327 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
328 because Bacula no longer restores sockets.
329 ebl Always use ignorecase fileset option on win32 FD.
331 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
332 that implements double quoting include names in conf files,
333 and also allows piping input by having the first character
334 be a vertical bar (|).
335 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
336 that implement %f in RunScripts to pass the FileSet name.
337 kes Skip leading | when lex input comes from a pipe as suggested
338 by Michael Stapelberg <michael@stapelberg.de>.
340 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
341 Nerijus Baliunas <nerijus@users.sourceforge.net>
343 kes Implement Plugin Directory and plugin events.
345 kes Implement a security enhancement: TLS authentication but no
346 encryption. Enabled by setting 'TLS Authentication = yes'.
347 Note when this is on, TLS encryption is turned OFF!
349 kes This patch corrects a problem where the maximum concurrent storage
350 jobs counter gets out of sync during restore jobs causing jobs to
351 'wait on max Storage jobs'. This patch fixes bug #1009.
353 kes This patch fixes bcopy so that it produces correct Volumes.
355 kes This patch eliminates spurious output to the console during a VerifyVolume
356 job that contains encrypted data. It fixes bug #1024.
358 kes This patch prevents the 'status dir' command from trying to use a scratch
359 volume and possibly moving it from one pool to another. This patch fixes
362 kes Add new include to postgresql.c suggested by Marc Cousins so
363 that it compiles correctly with pgre version 8.3.
365 kes Fix --archivedir addition to configure. Replace it with
366 --with-archivedir in configure.in This fixes the regression
368 kes This patch fixes bug #1012 where the job is canceled because
369 of Max Run Time exceeded when the job has not yet started.
371 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
372 one 'part' to write. Instead of each part being stored on disk,
373 written to DVD, then deleted from disk, all parts are written to disk,
374 and only the last is written and deleted from disk.
375 kes This patch fixes the status command to include the formating string for
376 JS_AttrInsterting. It fixes bug #1021.
377 kes This patch should fix the Mac OS X build problem on the latest
378 Darwin, where sys/types.h was not included correctly (apparently
379 due to a change in the Mac headers). The solution was to explicitly
380 ensure that it is defined for the ./configure.
381 This patch also has a rebuild of configure that includes the Debian
382 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
383 kes This patch should ensure that queued messages to the console are
384 displayed as soon as possible. It should fix bug 1007, but has been
385 reported not to work.
387 kes This patch fixes the infinite loop when trying to increase the
388 maximum number of volumes in a Pool during the add command.
389 This patch fixes bug #1008.
391 Release Version 2.2.6
393 db Remove extra data on estimate command in joblist for bat.
395 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
396 really change anything, but is the beginning of doing it *right*.
397 To do it completely right the LastWritten date must be passed to
398 the SD, but it is not yet done.
399 kes Minor tweaks to some bat restore SQL.
400 kes This patch fixes bug #1003 where putting the message output from
401 a Verify job into the catalog results in a recursive loop. The problem
402 seems to show up only with postgresql (to be verified).
403 kes Correct %x to %p in postgresql debug statement.
405 kes Fix bug #942 where lots of emails where generated when the heartbeat
406 interval was low and Bacula wanted a different tape from the one in
409 ebl Add new SD despooling attributes and Dir inserting attributes
410 job status codes in the catalog (Status table).
412 ebl Use qmake-qt4 instead of qmake when available (debian system).
414 kes Add a security warning to src/cats/make_catalog_backup.in indicating
415 that passing the password via the command line (arg 3) is insecure.
416 This responds to bug #990 (it doesn't fix it).
418 kes Set default debug_level to zero. This corrects bugs #991 and #993.
419 kes Fix a crash in bat when it cannot connect to the Director for example
420 if the Director is not running.
421 kes Remove redundant INDEX (JobId) from File table in the trunk.
423 kes Make explicit exception to GPL in LICENSE to permit linking
424 the Win32 FD with Microsoft VSS code.
425 kes Apply the Solaris package patch from
426 Masopust, Christian <christian.masopust@siemens.com>
427 kes Apply the patch to optionally add a timestamp in the debug output
428 submitted by Mariusz Czulada <manieq@wp.eu>.
430 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
431 backend (sql_strerror). Fixes bug #989
433 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
434 It applied with no problems.
435 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
437 kes Redirect stderror to stdin on mt status command in mtx-changer.in
438 since the status is returned on stderr on Solaris.
439 kes Activate Close button on tray-monitor window. This fixes
441 kes Check for NULL item in parse_conf.c before calling it. In the
442 case of Device, there is no item and this caused a seg fault when
443 Device appears in the conf file.
444 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
445 avoids pulling in config.h multiple times in some new code.
447 kes Fix spurious warning message printed when creating a volume with
448 a LabelFormat. This fixes bug #976.
450 Release Version 2.2.5
452 kes Add JobId in place of Job name in all the Jmsg() output.
453 kes Correct the APP_DESC for the Win32 storage service (remove an e).
455 kes Make maxvol-test and new more strict maxvol2-test work.
456 kes Print JobId in all Jmsg() job output.
458 kes Add new SD despooling attributes and Dir inserting attributes
459 job status codes. This fixes bug 961.
460 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
462 kes Fix doc issue. This fixes bug #963.
463 kes Fix listing performance problems in bat. Pointed out by
465 kes Remove old debug code.
466 kes Fix bat code that tests for Win32. This should fix bug #968
467 kes Query 5 list wrong Vol after migration. This fixes bug #960
469 ebl Fix #969 where user can't change Replace option in restore menu.
471 kes Save jcr in thread specific data (tsd) for each thread.
472 kes Make Dmsg() print JobId as -%u.
473 kes Make Jmsg, Emsg, and others automatically pickup the jobid
474 for the thread if it exists.
475 kes Remove old reservation debug jid code.
476 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
477 ebl Add an option that permit to specify spool size in job
478 definition. (Applying patches/testing/spoolsize_per_job.patch).
479 You must upgrade SD and DIR at the same time.
480 dvl Add new configuration item --archivedir
481 dvl Adjust regression tests to use tmp not /tmp. This will allow
482 multiple concurrent runs of the regression tests.
484 kes Fix race condition that drops final block written to volume.
485 This happens in rare cases with multiple simultaneous jobs
486 when the Volume fills. This fixes bug #964. May be related
487 to bug #935 and possibly #903.
488 kes Eliminate more strerror() and replace with bstrerror().
489 kes Remove BSD getopt and replace with unrestricted IBM version.
490 kes Fix Win32 build for changed calling sequences.
491 kes More tweaks to the mount volume routines to get everything
492 right. Changed variable name from find to have_vol, which is
493 much easier to understand.
494 kes Enhance btimer debug code.
496 kes Fix FD->SD authorization failure, which was due to spurious
497 wakeups from a pthread_cond_timedwait(). Simply check the
498 predicate before continuing. This fixes bug #953.
499 kes Add const char where needed (more to do). Remove temp debug code.
501 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
502 kes Don't overwrite error message in check_tables_version.
504 kes Unlock batch insert tables with same calls used elsewhere.
505 kes Allow starting 59 jobs a second.
506 kes Make SD session key more random.
507 kes Add retry for SQLite opening db if it fails. Probably helps
509 kes Suppress extra error messages during batch insert failure.
511 kes Add jcr to timer packets so if killed message can be sent to job.
512 kes Add JobId to all Dmsg() output.
513 kes Put some FD auth code on dbglvl rather than fixed.
514 kes Return insert attributes error message in db msg buffer to avoid
515 false error messages. Helps fix bug #966.
516 kes Separate batch init error messages. Probably helps fix bug #966.
517 kes Make SD code that contructs attribute insert check string lengths
519 kes If Dir gets an error during inserting attributes, cancel SD.
520 This reduces unnecessary error messages.
522 kes Correct search boolean for getting Volume info
523 ebl Cleanup batch insert code. Probably fixes bug #965.
524 kes Back out one small change to the reservation system (reserving a volume).
525 kes Rework how a Volume is mounted. It is now much more intelligent and
526 will always attempt to use any mounted volume if possible and reduces
527 calls to the Director asking about volumes.
529 kes Turn off some code when batch insert not enabled.
530 kes Edit FD name in connect error messages.
531 kes Rework the reservation system to take into account that the Director
532 might give us a Volume that is different from the current one being
533 used, and to ensure that we don't exceed Maximum Volume Jobs.
534 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
535 fatal error with multiple jobs running'
536 kes Add more debug code in reservation system.
537 kes Implement maxvol-test to check bug #947.
539 kes Add code to handle tray monitor separated from Win32 FD.
540 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
542 kes Add missed return in fixing verify bug -- trunk only.
543 ebl Fix a command parser issue causing a director segfault.
544 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
546 kes Increase the max block size to 4MB fixes bug #957.
547 kes ERABT if user sets min block size > max block size. Fixes bug #956.
548 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
549 is not properly mounted (recognized) during a poll.
550 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
551 Job that has differences reports Verify OK.
552 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
554 ebl Add an option to operate on all pools with update vol parameters.
555 This complete the project 20. Patch from Nigel Stepp.
556 ebl Add history support to bconsole when using readline.
557 Using Ctrl-D to exit doesn't update .bconsole_history
558 kes Modify new volume algorithm to use max MediaId for generating next
559 volume number rather than the count of Volumes. This should essentially
560 eliminate the failure rate if some volumes were deleted. Bug #921.
561 kes Begin implemention of Optimize Job Scheduling.
562 kes Implement restore callback that Dirk and I agreed on for bat
563 restore. This fixes bug #928. Restore of backup of zero files fails.
564 kes Fix SQL Catalog logging which broke with new db_escape_string
567 Release Version 2.2.4
569 kes Fix bacula_cats.def for new db_escape_string().
570 kes Increase size of name string when FD making connection to SD.
571 May fix bug #953. FD->SD connection failure.
573 kes Add code to help Dan debug 2drive-incremental-2disk test.
574 kes Add code to try to fix bug #908.
575 kes Add waits to multiple exit detection code to try to force pid
576 file to always be deleted.
577 kes Restore good dev.tar.gz to rescue set appropriate binary property.
579 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
580 trying to switch drives by checking for blocking before unblocking.
582 kes Cancel storage daemon in all cases where FD reports error. This
583 should fix virtually all cases of bug #920.
584 kes Fix db_escape_string() for MySQL which did not compile.
586 kes Fix error message that was clobbered when Dir tells SD it does not
587 have write permission on Volume. This should fix a minor point
588 in bug #942, but not the main problem.
589 kes Add code to cancel job in SD if FD connection fails. This should
591 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
592 dvl Pass jcr and db into db_escape_string() to enable better escaping
594 kes Fix migration code to get correct Volume name with multiple volumes
595 by skipping |. Fixes bug #936.
596 kes Implement patch supplied by Landon to fix bug #944 where using
597 TLS with bconsole uses 99+% of the CPU.
598 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
600 kes Move patches into patches directory.
602 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
605 ebl Using 'm' in bconsole will show messages like before,
606 and not memory usage.
607 kes Fix bug #935, and probably also bug #903 where files were not
608 restored. MediaId was not properly set in JobMedia record after
611 kes Suppress chown and chmod error messages if the FD is not running
614 kes Apply Martin Simmons' patch that should turn off the new API usage
615 when batch insert is turned off allowing building on older
617 kes Add ./configure search in qwt-qt4 for qwt package
619 kes Bacula is now free of 3rd party GPL copyrighted code!
621 kes Add guid_to_name.c/h which replace idcache.
622 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
624 ebl Detect if new PosgreSQL batch insert API is present.
625 kes Correct incorrect mempool call causing Director crash. Occurs on
626 systems without va_copy().
627 sb Update spec files for 2.2.1 release
629 kes Fix memory pool call in ua_output.c. bug #934.
630 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
631 Add test program to fnmatch.c
633 kes Integrate patch to README.vc8 from
634 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
635 edit it to get it into Unix patch format.
636 kes Implement mkpath.c to replace old FSF makepath.c
638 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
640 Release Version 2.2.1
642 kes Update POTFILES.in
643 kes Cleanup a few underquoted AC_DEFUNs in configure
644 kes Apply patch from Martin Simmons that adds a test for va_copy to
647 kes Fix bug #921 by increasing the number of tries to create a new volume
649 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
650 can be called multiple times. Implement a version for machines
651 without va_copy() that gets a big buffer.
653 kes Integrate more portable zone offset code into bsmtp.c
654 Submitted by Attila Fülöp.
656 kes Fix bad SD->FD return status reported by
657 (James Harper) <james.harper@bendigoit.com.au>
658 ebl Fix a bug in read_close_session which return random status
659 thanks to James Harper
661 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
662 and directory names during restore of single file/directories.
663 kes Add sanity checks to .sql command when string is empty. Hopefully
664 that will resolve Dirks Director crash.
666 kes Apply patch submitted by Martin Simmons that corrects a seg fault
667 in the bsmtp chat subroutine when debug is >= 10.
669 kes Fix Director crash when running bat SQL queries.
670 kes Add David's notes on Item 8: Copy pools.
672 kes Rework projects file to be current and ready for a vote.
673 kes Enhance lex scanner error message.
675 kes Tweak LICENSE file to mention BSD code.
676 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
677 if specified on the ./configure.
678 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
679 This class is intended to allow us to open a second bsock to the
680 Director while in the restore subdialog.
682 kes Fix configure to create bat Makefile before creating dependencies.
683 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
684 kes Add a tooltip to the tray monitor.
685 dvl Set the Director's PID file before dropping privs. This fixes
688 kes Update AUTHORs file
689 kes Increase the default max concurrent jobs to 20 in FD and SD to
690 correspond with the default .conf files.
691 kes Rewrite the Win32 service routines. This eliminates the 3 copies
692 some different, of the same file created by RN when porting the
694 kes Rearrange some of the Win32 directories and the placement of the files
696 kes Set DEVELOPER flag in version.h
698 ========================================================================
699 Release Version 2.2.0
701 kes Apply a second doc patch from Marc.
702 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
703 improves the tips section that discusses how to setup multiple
706 kes Update bat README file.
707 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
708 corrects a typo in the Recycle status check in db_find_next_volume().
709 This will probably fix a number of annoying problems with multiple
711 kes Modify most of dird/msgchan.c to use bsock class calls rather than
712 bnet calls -- no functionality change.
714 kes Modify the Verify output to specify if files are missing on
715 the Volume(s) or disk. Fixes confusion in bug #916.
716 kes When more than one Volume is read in a migration job, the last
717 Volume bytes reported are from the last read volume rather than
718 the last written volume. Fixed. This fixes bug #910.
719 kes Fix display of Recycle flag after update volume=foo recycle=yes.
720 It previously printed New Recyle flag is: no. This fixes bug
723 kes Correct seg fault when switching tape drives during restore.
724 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
725 be used until after 2.2.0 release.
727 kes Remove fnmatch() in SD that permitted wild card specifications.
730 kes Fix %g in filename returned by SQL for browse tree reported by
732 kes Fix configure so that it puts config.out in the cwd rather than
734 kes Attempt to fix the locking problem reported by Eric in bug #906.
735 kes Make berrno class to leave errno unchanged after constructor call.
736 kes Make bnet_server use the heap rather than the stack to allocate
737 its socket fd pointers to avoid a crash at termination. Problem
738 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
740 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
741 and putting it in depkgs-qt along with Qt4.3.
743 kes Rework code in acquire.c that switches drives for reading when
744 the Media Type does not match. This should fix bug #906
746 ebl Fix a director segfault during job setup #907
747 kes Correct seg fault in postgresql when first operation returns no
748 rows. Fixes Dirks File browser problem seg fault with bat.
750 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
751 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
754 kes Implement PopUp YES/NO dialog for bat.
756 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
758 kes Correct RunScript to terminate job in FD on failure.
759 kes Change abort_on_error and AbortJobOnError to fail_on_error
760 and FailJobOnError in RunScripts.
761 kes Minor tweaks of code formating in RunScripts, principally to
762 avoid depassing 80 columns.
764 kes Eliminate one #ifdef Win32 in bsmtp
765 kes Implement grow tool to grow a file for testing very large databases.
766 kes Add big-vol-test to test Bacula seeking with > 5GB.
769 kes Modify find_next_volume() to return all values in Media record.
770 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
774 kes Update Release notes
776 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
777 Warning, in previous beta version, all media get from scratch keep their
780 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
781 This should fix bug #842. Made a note to look at removing the temp
782 files at the end of the install.
783 kes Add ability to mount and unmount a file device providing it is
784 marked as being removable and has the appropriate mount and unmount
785 commands defined in the Device resource. This fixes bug #830.
786 kes When applying a storage override, release all previous storage
787 definitions rather than just prepending the new storage.
788 This should prevent a good deal of confusion.
790 kes Implement ./configure search for qwt libraries.
792 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
793 Win32 FD. This should fix bug #893.
794 kes Remove an unnecessary beep in Win32 init code.
795 kes Update copyright dates in Win32 executable about boxes.
796 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
797 code with a BSD getopt.c and getopt.h.
798 kes Remove sched.h from the Win32 compat directory -- not used.
799 kes Remove the Exit menu item from the Win32 tray monitor. If you really
800 need to shut it down, do it through the services panel or the command
802 kes Remove some inappropriate Bacula FSFE copyrights.
803 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
804 kes Fix regress config non-portable test as pointed out by
805 Florian Heigl <florian.heigl@gmail.com>
806 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
807 as pointed out by Florian Heigl <florian.heigl@gmail.com>
809 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
810 Reported by Frank Sweetser.
814 kes Fix client-only build.
815 kes Integrate client-only fixes for bsys (initgroups) and conio from
816 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
817 kes Make arguments to get_scratch_volume() in same order as other
819 kes Rework the prune_volumes() subroutine so that after purging and
820 no volume found in desired pool, it will check for a scratch
821 volume. This prevents recycling the whole scratch pool.
822 kes Add code to status storage to print boffset_t (largefile support).
824 kes Move qwt (Graphics libarary for Qt4) to depkgs.
825 kes You now need a --with-qwt=<dir> to be able to build bat.
826 kes Update src/win32/cats/bacula_cats.def to include the new
827 db_get_query_dbids() call on Win32.
829 kes Correct a problem when selecting a scratch volume and moving
830 it to another pool that lost some columns.
831 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
832 kes Enhance Autochanger error messages to include Volume and device name.
833 kes Rework prune_volumes() code to take account of InChanger flag,
834 and to handle recycling volumes going to the Scratch pool and
835 current pool because the RecyclePool directive.
836 kes Implement a better and more efficient db_get_query_dbids() to
837 handle creating and passing back a list of DBIds.
841 kes Start work on new more efficient DBId subroutine. First use
842 will be for recycling volume to Scratch inchanger.
843 kes Increase number of JobIds in pruning from 1000 to 10000.
844 This to be replaced by above routine.
845 kes Begin implementation of building Qt4 on Win32.
846 kes Correct typo in fix I added for bad TLS shutdown.
847 kes Pull 2.0.3 patches into patches directory.
848 kes Update Release notes. Include qt-console in line count.
849 kes Update Projects file.
851 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
852 bug in migration code where a job that spanned two volumes
855 kes Implement new BST_DESPOOLING blocked state. Change from locking
856 during despooling in SD to blocking. This means that other threads
857 can work with the device structure, in particular the reservations
858 system while despooling.
860 kes Fix return in reservation message queue that missed clearing
861 the jcr lock (implemented 26Jun07 below).
862 kes Rename a number of dev methods to make locking function names
864 kes Document locking in lock.c. Move lock structures to new file
867 kes Move reservations message lock to lock jcr only this
869 kes Move main SD locking code into lock.c (new file).
870 kes Update Win32 build to include lock.c
874 kes Dirk committed the qwt library code for drawing graphs in bat.
875 kes Tweak install of qwt so that it is integrated with ./configure.
877 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
878 out by Eric (my typo).
879 ebl Fix configure.in to get batch mode enable
880 kes Return correct string from authenticate.cpp in bat when connecting
882 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
883 spurious line drops when using TLS.
884 kes Do not file reparse points when restoring a file that already
887 kes Implement Windows reparse points -- similar to directories, but
888 we do not descend into it. This is a first cut. They seem to
889 be backed up, but restore is not yet tested.
890 kes Remove restore_blocking in tls code when shutting a socket to leave
891 it in blocking mode. Hopefully this will fix the encryption bug
892 reported by Frank Sweetser.
893 kes When opening a file for backup, tell the OS that we are going to
894 read it sequentially -- optimization.
895 kes Change variable names in authenticate_director() to not conflict
896 with member names in bat. Caused great confusion with compiler,
899 kes Queue openssl error messages in case of comm problem.
900 kes Do shutdown() call if socket terminated.
901 kes Remove some duplicated code in tls.c
902 kes Move more of the bsock member variables into private and access
904 kes Add Frank Sweetser's tls-test to the regression suite.
906 kes Add Swedish sv.po file
908 kes Don't print clock skew message in FD if less than 3 seconds diff.
909 kes Add a bit of VSS info to status client.
910 kes Implement a first cut of Vista VSS, using Win2003 code.
914 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
915 loaded tape but uses first drive).
916 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
917 This was indeed a Win32 issue.
919 kes Simplify search of autochanger for in-use Volume.
920 kes Fix exit condition of check for in-use volume. kes Remove
921 inappropriate my_postgresql_free_result() in db_close()
923 kes Fix bad return in FD when encryption signature not found.
924 Probably caused a crash.
925 kes Inhibit missing encryption signature error messages for
926 file types where no signature computed.
927 kes Correct inverted check on autochanger in reservation system.
928 kes Tweak debug code in autochanger reservation.
930 kes Add some additional locking in the cats directory in subroutines
931 that modify packet variables called from batch insert.
932 kes Rework how dcrs are allocated. new_dcr() can now be called
933 with an existing pointer, and it will simply clean it up.
934 This allows the reservation system to test various different
935 devices, and will permit easy device changes.
936 kes A bunch of changes all over to handle new new_dcr() calling
938 kes Work more on the Volume management in the SD. Remember Volumes
939 for tape drives and for autochangers (even virtual disk changers).
940 kes When looking at the Volume list to reserve a drive, handle
941 autochanger names correctly by interating through the changer
942 devices. Also call the Director to see if a Volume is suitable
944 kes Fix some bugs in bscan. Make sure all media records are written.
945 Make sure that valid JobMedia records are written for disk files.
946 Previously they were completely wrong.
947 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
948 that the URLs don't change and so that the developers will all
949 work off the same copy. Rebuild from scrach.
950 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
954 kes Fix seg fault in FD from incorrect digest size.
955 kes Fix argument to non-OpenSSL crypto.c subroutine.
959 kes Remove a few malloc()s from the encryption code.
960 kes Use the class calls to bsock in filed/backup.c and restore.c in
961 place of the old bnet_xxx code.
962 kes Implement code that does an on the fly calculation of the
963 signing digest during restore of encrypted files. It makes
964 a best guess at the algorithm, and if it is not correct, will
965 then revert to the old code which reads the file after it is
967 kes Implement at least one missing crypto stream in stream_to_ascii()
968 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
969 #877 where a reload with bad syntax causes Dir to exit.
971 Cut: 2.1.14 beta (not released)
973 kes Do not free a volume on a tape drive until another volume is
974 mounted and read, or the autochanger unloads the volume.
975 This should help the SD re-use volumes that are already mounted,
976 and should fix bug #886.
977 kes Apply patch from user brettedgar that allows gnome2-console include
978 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
979 kes Apply patch from Lucien Weller that fixes day of week calculation
980 because of DST flag problem. Fixes bug #887.
982 kes Move find_next_appendable_volume() to after acquiring a valid device
983 in reserve.c. This fixes bug #864 -- confirmed by reporter.
985 kes Unable to reproduce bug 872. However added additional testing for
987 kes Bug #874 resolved by documenting SQLite limitations.
988 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
989 kes Bug #881 resolved by removing typo in mtx-changer script.
990 kes Made Frank Sweetser's wiki the official Bacula wiki with his
991 approval. Added a link to the wiki on the web page, and implemented
992 a backup from http://paramount.ind.wpi.edu
994 kes Fix update allfrompool to pass pool name.
996 kes Convert to pure GPL v2 license.
997 kes Fix sscanf problems reported by Peter Buschman that caused
998 a bus error on Solaris.
999 kes Rework (simplify) the select prompt in bat.
1000 kes Move get_jobid_from_tid() into lib and create a
1002 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1003 should definitely fix the problem of lost error messages in the
1005 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1006 kes Eliminate tcpd.h from the project. Enclose the #include from the
1007 library with extern C ...
1008 kes Add print of signal name when a signal is trapped.
1010 Release: 2.1.12 beta
1012 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1014 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1015 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1016 makes SQLit3 run 30 times faster, though a bit less safe.
1017 kes Implement --with-batch-insert in configure and detection of thread
1018 safe libraries. It is on by default, but turned off if no thread
1019 safe library (e.g. SQLite 2) is available.
1021 kes Fix Bacula PostgreSQL buffer overruns.
1022 kes Do better checking for NULL results returned from PostgreSQL;
1023 implement retry for failed queries; clear results buffer after
1024 failed query. Hopefully this will correct the PostgreSQL failures.
1026 kes Implement algorithm to handle only one appendable volume with
1027 Prefer Mounted Volumes = no.
1028 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1029 returned from a query.
1030 kes Make volume lock recursive.
1031 kes Implement an additional volume reservation algorithm that
1032 starts by considering all reserved volumes then uses the
1033 old brute force algorithm of searching the resources to
1034 find a suitable device.
1035 kes Add new reservations debug code and refine the old code.
1036 kes Update the win32/dll/bacula.defs file.
1038 kes Tweak reservations algorithm to permit a few more cases, i.e.
1039 volume reserved, but on different drive, ...
1040 kes Enhance SD status to include Pool and Media Type for drive in a
1041 more readable format (a bit longer).
1042 kes Fix PostgreSQL double free.
1044 kes Minor refactoring of restore decryption code.
1045 kes Add code to smartall.c to detect double free of a buffer.
1047 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1048 so that bsmtp will create a correct email address (mailbox only).
1049 kes Modify 'memory' command so that the buffers are listed as 'In use'
1050 to avoid confusion with Orphaned buffers.
1051 kes I reworked the OpenSSL include/lib flags to be handled in
1052 the standard Bacula way, which should fix bug #863 concerning
1053 non-standard OpenSSL libraries.
1055 kes Implement Help Browser window for bat.
1056 kes Fix reload bug that reset StorageId to zero.
1058 kes Fix TLS #ifdefing when TLS turned off.
1059 kes Ensure that when labelling a tape with Slot=0 that InChanger
1061 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1063 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1064 add DISTINCT (required by PostgreSQL).
1065 kes Implement BSOCK authenticate_director() method. Eventually will
1066 authenicate all daemons.
1067 kes Move several more functions into the BSOCK class.
1069 kes Add code to tell the OS that we no longer need a cached
1070 file that we were reading. In findlib/bfile.c. Also,
1071 only cache files that we are reading. Thanks to
1072 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1073 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1074 kes Implement script to automatically generate cats and dll .def
1075 files for Win32 dll.
1076 kes Update README.mingw32 to include new .def file generation.
1077 kes Correct typo in UTF-8 error message as reported by:
1078 jhernandez <julianhernandez@gmail.com>
1079 kes Add additional sm_check() code on debug level 1.
1080 kes Set default debug level to 1.
1081 kes Trap SIGABRT in attempt to get traceback.
1083 kes Reduce bat connect timeout from 30 to 15 seconds.
1084 kes More restructuring and implementing BSOCK class in place of
1086 kes Remove a few unnecessary malloc() tests in crypto code.
1087 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1088 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1089 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1091 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1093 kes Fix Verify InitCatalog. The attributes were not pointing to the
1094 correct saved location.
1095 kes Implement message callback so that GUI is sure to get all
1096 daemon messages. Currently displayed in a dialog in bat.
1097 kes Ignore SIGUSR2 (Bacula timer) in bat.
1098 kes Apply regress patch from bug #859 to allow regress to work
1099 with Solaris compiler.
1101 kes Begin adding TLS support to bat.
1102 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1103 clean up lex.c and make it more readable.
1105 kes Move more bnet functions into the BSOCK class.
1106 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1107 kes Complete change of berrno strerror() method to bstrerror()
1109 Release: 2.1.10 beta
1111 kes Cleanup incorrect email addresses in bsmtp.
1112 kes Make bat display initial messages rather than discard them.
1114 kes First cut of adding .mod to the run command.
1115 kes Implement auto display of messages in bat.
1116 kes Enhanced preferences to allow all Bacula output to be
1119 kes Try to make bsmtp date routines more generic.
1120 kes Fixed bug #856 autochanger documentation.
1121 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1122 kes Add new cats entry point so Win32 builds.
1124 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1126 kes Do better checking for the MySQL 64 bit libraries looking for both
1127 .a and .so libraries.
1128 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1129 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1130 kes Require the thread safe version of MySQL during configure. Thanks
1131 to Andre Noll for pointing this out.
1132 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1133 continuing in migration code.
1134 kes Apply implementation of tray-monitor font derived from gnome-console
1135 submitted by Andreas Piesk <a.piesk@gmx.net>
1137 kes Eliminate important memory loss in SQLite
1138 kes Fixed the batch insert MySQL thread specific data that was not
1139 being freed. See cats/mysql.c:db_thread_cleanup().
1140 kes Fix restore before command.
1141 kes Convert old hdr.name to name() in a few places.
1142 kes Implement update jobid command.
1143 kes Return all time_t dates in db_get_job_record()
1144 kes Stop watchdog in SD earlier.
1145 kes Put Pool just after Storage in please mount message.
1146 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1149 kes Update the po files.
1150 kes Fix Verify InitCatalog by making it cache attributes.
1152 kes Change name bacula-bat to bat for man 1 page to correspond to
1154 kes Check for client and store NULL pointers in status command. This
1156 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1157 kes Fix sign extended editing of %p.
1158 kes Clean out a little old #ifdefing in cats/mysql.c
1160 kes If time diff between DIR and FD is more than 600 seconds convert
1161 INFO message to WARNING.
1162 kes Implement heap size display in status for all daemons.
1163 kes Attempt to fix MySQL db open memory loss (not successfull).
1164 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1165 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1166 Query. This looks like a MySQL but but by doing extra releases,
1167 the memory goes away. This should fix bug #847.
1169 kes When backup fails, cancel SD before waiting for sd termination.
1170 kes If SD is waiting for FD to connect during cancel, wake up the
1172 kes Fix fsf code so that errno is correctly reported.
1173 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1175 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1176 so that Bacula doesn't later stumble into a seg fault.
1177 kes Use the term Restore Client in the restore Job report.
1178 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1179 the original job's FileSetId.
1180 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1181 spooling in migration jobs. Not yet tested.
1182 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1183 reading conf file from a pipe. However, do it with open_bpipe()
1184 rather than popen. Not yet tested.
1186 kes Fix an ugly bug where the VolCatBytes were getting updated
1188 kes Implement bconsole memory command that prints current memory
1189 usage, plus smartalloc dump.
1190 kes Clarify some error messages in backup, admin, and migrate.
1191 kes Shrink label dialog to smaller size.
1192 kes Invert Cancel OK buttons on restore to be OK Cancel.
1193 kes More strerror() to bstrerror() conversions.
1195 kes Start implementing bstrerror() in place of strerror().
1196 kes Stripping path -- seems to work.
1198 kes Prevent door and port files from being restored (mostly
1200 kes Free an unreleased buffer in compat code.
1201 kes Change console Job name from *Console* to -Console- to eliminate
1202 Win32 filename problems. Put Win32 path separator when creating
1203 Console file. This fixes bug #846.
1204 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1206 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1208 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1209 to force Win32 error message.
1211 kes First cut strip path. The data should be passed to the FD,
1212 but nothing is done with it yet.
1213 kes Enhance the digest and signature routines in the crypto
1214 library to accept a JCR and to use it to print error messages
1215 so that they will go in the Job report rather than the daemon's
1217 kes Simplify some of the verify signature code.
1218 kes Simplify a few of the alternative returns in the signature
1221 ebl Use only POSIX regex instead of GNU regex in breg.c for
1222 File relocation. It fix broken freebsd compilation.
1223 kes Convert all other Dir files to use new ua class message
1225 kes Tentative fix for missing digest signature in bug 807.
1226 kes Correct handle problem in new win32_ftruncate routine.
1227 kes Convert ua_purge.c and ua_update.c to use new ua class
1228 message routines for bat.
1230 kes Correct incorrect installation of LICENSE in Win32 installer.
1231 kes Display LICENSE at the beginning of the Win32 install.
1232 kes Attempt to correct the need for the png files to be installed
1234 kes Reapply my bat.conf install script in qt-console. I think I
1235 editted bat.pro instead of bat.pro.in and it was lost.
1236 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1237 the /var/lock/subsys for subsysdir. Also corrects typos in the
1240 kes First cut update job.
1241 kes Correct configure to include qmake of src/qt-console directory.
1243 kes Make restore job yes/mod/no print in one command so GUI works.
1244 kes First cut implementing backup and restore client.
1245 kes Correct editing in Verify output that caused a seg fault.
1247 kes Insure that bat.conf is not overwritten during installation.
1248 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1249 while I was implementing migration in March 2006 !
1251 ebl Cleanup file relocation, using char *RegexWhere instead of
1252 char *where + bool where_use_regexp
1253 kes Update some manpages and add bat manpage.
1254 kes Make a first cut at converting bacula.spec.in for bwx-console
1256 kes Apply patch from John Goerzen to add hostname as fourth argument
1257 to make_catalog_backup script.
1258 kes Fix typos I introduced into bsmtp.c
1259 kes Make pm_strxxx() routines handle input of NULL pointer. This
1260 is to protect from NULL pointers returned from SQL databases.
1261 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1262 kes Add more debug to FIFO code -- fix fifo regression test.
1264 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1265 kes Add thread timer to bnet_connect() to break from OS if wait time
1268 kes Update Win32 build to include new files, new symbols, and
1270 kes Implement socket level heartbeat (tcp_keepidle)
1271 ebl Commit File relocation patch
1272 kes Make bat have 'make install' target.
1273 kes Warn during install if old gnome-console binary found.
1274 kes Warn during install if old wx-console binary found.
1275 kes Add -8 option to bsmtp command line to add content type utf-8.
1276 Fixes bug #809. (Character coding problem in bsmtp).
1277 kes If < is found in target (from, to, cc) then do not enclose the
1278 target in < > in bsmtp. Fixes bug #772 (malformed address).
1279 kes When printing certain items in dbcheck, stop after 300000.
1280 Fixes bug #822. (dbcheck loops).
1281 kes Incorrect status in Dir after waiting for mount with poll set.
1284 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1286 kes Print waiting to reserve a device every 5 mins.
1288 kes Don't call close_part in label.c if tape and relabel.
1289 kes Don't free volume if busy in close() -- should help with
1291 ebl Fix #824 RunScript bug (After script could be execute twice)
1292 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1293 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1294 Add a regression script to test RunScript
1296 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1299 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1300 deprecated. No additional bugs will be fixed, and they will be dropped
1301 in a future release (probably 2.4.0).
1302 kes Change name of wx-console to bwx-console to make it more Bacula
1304 kes Change the name of gnome-console to bgnome-console to make it
1307 kes Some time in March, a Feature Request with patch from Jorj Bauer
1308 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1310 The ability for the director to validate a Client (FD) CN against
1311 an arbitrary set of patterns rather than the hostname, with
1312 A new 'TLS Allowed CN' set of directives which are implemented
1313 in the Client resource. Then pattern matching is used in place
1314 of hostname matching against the Certificate's CN. As an example, we
1315 have certificates which (a) use a local CA, and (b) have a CN of the
1317 kes Add new/changed entry points to Win32 build
1318 kes Create unaccepted-projects for projects that are not accepted.
1319 kes Simplify locking in the reservations system.
1320 kes Add more debug code in reservations.
1321 kes Make sure error condition on reserving a volume is handled correctly.
1322 kes Correct handling of volume_in_use.
1323 kes Correct handling of initializing a device.
1324 kes Move handling of broadcasting releasing a device into release_device().
1325 kes Correct attaching dcr to dev so that it is only done if device
1326 is properly initiated.
1328 kes Locking debug level tweaks in SD.
1329 kes Tweak new Volume code.
1331 kes Add exec external-command [wait-seconds] to bconsole. This
1332 executes the external-command. Note! normally external-command
1333 should be enclosed in double quotes.
1334 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1335 it should normally be off in a production system.
1337 kes Implement die command for SD so that we can force it to dump.
1338 kes Implement SD lock debug code.
1339 kes Implement new algorithm for keeping Volume list in SD. It
1340 is now owned by the device.
1342 kes Implement new code for freeing in use volumes that should
1343 resolve if not all, some of the problems of multiple drive
1344 tape conflicts described in bug 801.
1346 kes Fix gui/bacula-web/images files in svn.
1347 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1349 ebl Fix a bug in batch mode (in string escape)
1350 kes Correct migration prune SQL typo that crept in in a
1351 recent 2.1.x change.
1353 kes Move bnet_despool() into class in bsock.c
1354 kes Modify job report to include director name and Build OS.
1355 kes Move drop root privilege and check_catalog() before fork.
1356 kes Add update database scripts (version 9 to 10) to updatedb directory.
1358 ebl Check size and age of each file after its backup to see if
1359 it has changed during backup, if 'checkfilechanges' is set.
1360 The FD will do an extra check (stat(2)) after
1361 each file backup. mtime, ctime and size are compared with
1362 'before backup' information. If time or size mismatch, an
1363 error message will be generated. You must upgrade FD to use it.
1365 kes Make database name and user configurable
1366 --with-db-name=xxx --with-db-user=xxx
1367 kes Add back database type to message.c for debugging.
1369 kes Implement dir_sql() which issues an SQL query.
1370 kes Modify bat medialist to use dir_sql() and do some minor C++
1371 formatting as well as eliminating a number of pointers, simplifing
1374 kes Fix some of the mtx-changer grep commands for tape label readers.
1375 kes Convert a number of bsendmsg into the appropriate send/warning/error
1376 message class calls.
1377 kes Suppress the using database message in the .sql command.
1378 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1380 kes Add context menu for floating a window.
1381 kes Some minor cleanup and name changes in qt-console
1382 kes Add doing mt setblk 0 in Win32 mtx-changer.
1383 kes Apply Martin's bug fix to move definition of ENODATA for
1385 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1386 sqlite2 and sqlite3.
1388 kes More pruning cleanup.
1389 kes Turn on wait_for_drive by default in mtx-changer.
1390 kes Turn on Batch insert code by default as it now passes regression.
1391 kes Add ./configure --enable-bat to enable building of Bat.
1392 No install yet though.
1394 kes Implement a new .sql command for bat.
1395 kes Implement code to turn off pruning in obtaining the next volume.
1396 Pruning is turned off for the status dir command, but turned on
1397 for SD requests and for the list nextvolume command.
1399 kes Correct Qmsg() that was not updated correctly when committing a
1400 previous change (probably the recent TLS patch).
1402 kes Write new subroutine is_volume_purged() that explicitly checks
1403 if the Volume is purged, and if so marks it as such. This should
1404 resolve problems reported about needing to mount twice to recycle
1406 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1407 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1408 amount of duplicated code.
1409 kes Do volume pruning only for the Media Type desired (reduces pruning time
1410 if multiple Media Types are in the same pool).
1411 kes Implement more detailed info in the Job report for the Bacula version
1413 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1415 ebl Add bbatch tool to bench database and insert mode.
1416 Fix sql quote stuff in batch mode
1417 Fix sql stuff for mysql
1419 kes Correct problems with am/pm scheduling. Fixes bug #808.
1420 kes Implement new prunning code that prunes up to 1000 jobs at
1421 the same time. The same technique can be applied to a number
1422 of other prune/purge subroutines.
1423 kes Add an insanity check when starting a new tape job to ensure
1424 that the tape position has not been changed. If so fail the
1426 kes Fix Win32 build for dlls to add the folllowing:
1427 src/lib/bsock.c -- new file with new entry points
1428 src/lib/dlist.c -- new entry points
1429 src/cats/sql_create.c -- new entry point
1430 src/cats/sql_cmds.c -- new DATA item exported
1432 ebl batch mode cleanup bscan-test is ok now.
1433 kes Implement SD code to check length of disk volume before appending.
1435 kes Correct return status on db_batch... routines.
1436 kes Add call to db_write_batch_file_records() to migration code.
1437 ebl Fix AfterJob timing
1438 kes Move the checking of the database in initializion of the Director
1439 to after we drop privileges. This avoids the need for both root
1440 and bacula access to the DB.
1441 kes Correct a misplaced variable definition in src/filed/backup.c
1442 kes Correct how the new batch insert db_create_attributes_record()
1443 uses the arguments. Caused a seg fault in bscan.
1444 kes Implement lock() and unlock() methods in DEVICE class.
1445 Implement block() and set_block(xx) methods in DEVICE class.
1446 kes Modify bnet_connect() so that it uses time() to check for the
1447 wait time expiring (on some OSes, some system calls may not
1448 return immediately).
1449 kes Modify Verify to obtain the previous JobId when it is actually
1450 running rather than at schedule time (as it was in 1.38.x).
1451 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1453 kes When checking pid in pid file, continue running if the pid is
1454 the same as ours. This occurs on IRIX after a system crash.
1457 kes Extend new GUI API.
1458 kes Make the ua structure a class, and implement send_msg(),
1459 error_msg(), warning_msg(), and info_msg().
1461 kes Apply fix from for building wx-console on the Mac from
1463 kes Implement new select mechanism for GUI programs.
1464 kes Reorganize initialization of stackedWidgets in bat.
1466 kes Add updated nagios plugin supplied by Christian Masopust.
1468 kes More bat implementation.
1469 kes File migrate bug with Pool Occupancy using mediaid instead
1470 of jobids. Fixes bug #795.
1471 kes Fix orphaned buffers in filed backup and verify due to
1472 crypto buffers not freed during errors. Fixes bug #789.
1473 kes Extend new GUI api code to tree commands.
1474 kes Ensure that tree and dot commands check console ACLs.
1475 kes Permit marking directory with trailing slash.
1476 kes Allow 20 console connections (instead of only 10).
1478 kes Add smartctl call to bacula-sd.conf as an example of getting
1481 kes Modify jobq.c to let simultaneous restore jobs run. This may
1482 cause them to fail if they cannot get a drive.
1483 kes Add Client Connect Wait to Storage daemon to permit users to
1484 modify the time the SD waits for a FD connection.
1486 kes Correct virtual changer check which was backwards. This caused
1487 volumes to be unloaded into slots already occupied.
1489 kes Apply Command ACL filter to JobId list in restore command.
1490 kes Correct typeo in var.c patch.
1492 kes Don't let Bacula prune File or Job records for the current Job.
1493 kes Fix variable substitution pad + inc bug reported (with patch)
1496 kes Correct SQLite log table index as reported by Luca Berra.
1498 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1500 kes Begin implementing new comm signals for API.
1501 kes Fix a few places in lib/message.c where the open fd may
1503 kes Continue implementing lib/bsock.c (real class). Make jcr,
1504 who, host, and port private. There are new methods to access
1505 them for non-class use. This required touching a number of files.
1507 kes Add LANG=C to autoconf/randpass so it works with languages other
1508 than English. Fixes bug #788.
1510 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1512 You will not be able to generate Include/Exclude list any more.
1513 It will be fixed soon.
1514 If you want to use this, you can apply
1515 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1517 kes Restore of sockets created false error messages because Bacula
1518 no longer restores sockets, but the code was still trying to
1519 set the attributes on a non-existent file. Reported by a user.
1520 ebl finish RecyclePool feature
1521 Media will takes Pool.RecyclePool
1522 when moving from Scratch to a Pool or when user will do
1523 update volume=xxx frompool
1524 To use it, add RecyclePool = aPool to your Pool resource
1527 RecyclePool = Scratch
1531 kes Expand new BSOCK class adding signal() and new BNET signals.
1532 kes Begin enhancing the dot commands adding a new API function
1533 that returns more information and will make it easier
1534 to interface to the Director from a program.
1536 kes Make DEVICE fd private. Its new name is m_fd, and can be
1537 obtained with dev->fd() outside the class. This is the
1538 first of many DEVICE members to be made private.
1539 kes Implement Michael Renner's idea on having a virtual disk
1540 changer. I made some minor modifications (e.g. I did not
1541 implement the Virtual Changer directive, but simply set
1542 the Changer Command to an empty string.
1544 kes Implement a BSOCK send() method that writes the whole record
1545 in a single write() request rather than in two.
1546 ebl add update volume=xxx recyclepool=yyyy
1547 volume takes recyclepool from pool when using update volume=xxx from pool
1549 kes Fix encryption deblocking bug, which caused some restored files
1550 to be truncated. This fixes bug #763.
1551 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1552 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1554 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1555 ebl Use btime_t instead of uint64_t in media patch.
1557 kes Optimize the use of the database a bit in the Status dir command.
1558 Only open it when needed, ensure that if any previous database
1559 was opened, it is closed.
1561 kes Correct VolCatBytes bug from media patch.
1562 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1563 in the case of orphaned records.
1564 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1565 and File records in 300K chunks to be more efficient. This
1566 idea came from Juan Luis Frances (if I remember right).
1567 kes Apply Eric's scratch patch that moves a purged Volume to
1568 the RecyclePool. Question: how is RecyclePool set? what
1569 happens to the ScratchPool?
1570 kes Apply Eric's media patch that collects read/write media
1571 times as well as byte counts. This patch requires a
1572 simultaneous upgrade of the DIR and SD. Note, there
1573 should be some way to turn off timing. I'm not sure
1574 times are in Bacula units.
1575 kes Apply Eric's batch-insert patch.
1577 kes Update projects list.
1579 kes Implement Include/Exclude file lists in FD as dlists using
1580 the new dlistString class. This permits efficiently having
1581 large include/exclude lists and completes project Item 25.
1582 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1583 console is authorized to cancel the job. This fixes bug
1585 kes Modify SD so that the VolCatJobs medium record is updated
1586 at the beginning of a Job rather than the end. This
1587 fixes bug #775 where exceeding MaxVolJobs caused jobs
1589 kes Added a mutex around getting and setting Volume information
1590 so that multiple simultaneous jobs will single thread.
1592 Switch to using Subversion
1593 kes Remove src/pygtk-console/ from configure
1595 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1596 plus the entrypoints.
1597 kes Apply patch supplied that corrects debug print
1598 in canceling jobs for max run time. Supplied as
1599 part of bug #621, which was previously fixed.
1601 kes Test on job_canceled() and sd_msg_thread_done inside
1602 loop starting the message thread to avoid a race condition.
1604 kes Remove rl_catch_signal from console.c as it conflicted
1605 with the header definition. Fixes bug #765.
1606 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1608 kes Clarify some stored/acquire messages to indicate if the
1609 problem is with read or append.
1611 kes Fix memory leak with storage ids in cats/sql_get.c
1612 kes Terminate watchdog earlier to avoid reference to released
1613 memory -- reported by Jason Austin.
1614 kes Move closing the database from jobq.c to the director daemon
1615 termination routine. This fixes memory leaks for shadow jobs
1616 (i.e. migration jobs).
1617 kes Free up the unique jobid chain items in migrate.c. This fixes
1618 a memory leak problem.
1619 kes Convert some ugly looking for statements to use foreach_alist
1620 in findlib/find.c. This will facilitate converting the structures
1621 to use dlist (for large include/exclude lists).
1622 kes Fix a bug in the btree.c and btree.h routines, then rename them
1623 rblist and add them to be built in src/lib. Include some new
1624 methods written by Rudolf Cejka that make the code more readable
1625 (hides some of the ugly casting).
1626 kes Add set_next() and set_prev() methods which make the code much more
1627 readable. Also add a new dlistString class that facilitates storing
1628 strings in dlists. To be used in the large include/exclude lists.
1629 kes Make some trivial modifications to lib/tree.h that use rblist
1630 rather than dlist for storing the tree links. This was suggested
1631 by Rudolf Cejka. The result of this is that the restore tree now
1632 uses red-black binary trees rather than simple linked lists. This
1633 should give rather dramatic speed improvements for directories
1634 contining large numbers of directories/files (more than 10000).
1636 kes Fix maxruntime bug #621.
1638 ebl Implement the include JobID in spool file name project.
1639 kes Reorder projects file in order determined by Jan 2007 vote.
1640 kes Implement item #12 on project list -- quick release of FD by
1642 kes Fix open of SQLite3 db where user does not have write permission
1643 so that DIR does not crash. Fixes bug #761.
1645 kes Add back missing @ in Win32 Makefile.
1646 kes Change 'Device not configured to autolabel' from INFO
1648 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1649 which should restart an indefinite # of times.
1650 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1651 other DIR specifications.
1653 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1654 Fix path quoting in SQLite scripts.
1655 Fix problems with SHGetFolderPath.
1657 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1659 kes Fix Job restart on error bug that promotes an Inc to a Full
1660 backup. This should fix bug #755.
1661 kes Add qt-console and first cut of code.
1665 kes Fix Bacula->Documentation link on Win32 to point to index.html
1666 instead of bacula.html. Fixed bug #750.
1667 kes Return JobId in db_get_job_record() when JobId==0. This should
1669 kes Do not release source pointers when restarting a failed job.
1671 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1672 This *should* fix bug #747.
1673 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1676 kes Modify USTORE constructor to set an empty store_source string,
1677 and don't copy the store_source string in a cancel. Hopefully
1678 this will fix Arno's seg fault, bug #744.
1679 kes Add back code to disable conio in configure. Fixes bug #743.
1680 kes Correct the Options scanner in the FD to correctly handle
1681 SHA1 option, which was eating the next option. Reported by
1683 kes Add code to indicate when the SD is spooling, spool wait, and
1684 despooling as requested by Alan Brown.
1686 Version 2.0.0 released: 4 January 2007