1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Fix a few more Coverity reported problems.
30 kes Apply Allan Black's status dir job count patch.
31 ebl Add information about IMPORT/EXPORT slots in mtx-script.
32 kes Enhance a couple of SD debug messages.
33 kes Tweak unload flag setting and ensure it is set during swap.
35 ebl Fix #1091 about bad output in estimate command.
37 kes Modify autochanger locking to attempt to avoid race
39 kes Make sure device not busy before doing label command.
40 kes Display open() errors except when polling. Previously too
41 many were suppressed. This should fix bug #1070.
42 kes Fix Win32 reparse points. Bacula will not recurse into any
43 reparse point directory, including mount points, unless the
44 directory is explicitly mentioned at the top level (same as
45 with Unix). A file that is linked to another file will be
46 backed up -- much as Unix does for hardlinked files.
49 kes Remove double quotes from ChangeLog and ReleaseNotes
50 kes Remove StorageId test when pruning and recycling (Eric's changes).
51 kes Remove old form of locking when getting volumes -- causes deadlock.
52 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
53 the name unique and to eliminate compile time error.
54 kes Add accurate.o to Win32 FD Makefile
56 kes Fix cats dll build on Win32 after db_update_job_end_record
57 calling sequence change.
58 ebl Switch to tokyo dbm instead of htable in accurate code
59 ebl Include tokyo dbm to bacula source tree
61 kes Fix buffer overruns detected by Coverity.
63 kes Tweak joblog display.
65 kes Implement --without-qwt
66 kes Fix layout of restore tree dialog
67 kes Add configure bat QWT libraries, so that bat can be built
68 with or without the QWT libaries.
70 ebl Add dummy tape driver for regression tests.
71 kes Make sure we unload the right slot when swapping.
73 kes Add debug times, reduce size of two-pool-changer test
75 ebl Tweak autoconf scripts for faketape
77 kes Improve SD reserve debug code.
78 kes Testing an improvement to free up volumes no longer in use.
80 kes Rework SD acquire for read to handle autochanger Volume
82 kes Implement regression that explicitly tests swapping a Volume
83 from one drive to another.
84 kes Enhance disk-changer to detect most error conditions.
85 kes Fix SD code so that it properly swaps a Volume between drives.
88 kes Apply libdbi patch from Joao Freitas for regress and for
89 Bacula trunk. Regress now works with libdbi. Nice.
90 kes Apply .nobackup patch from bug #1077 submitted by
92 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
93 name into jobs cloned via the run directive.
95 kes Prevent a Volume that is being swapped from being freed from
96 the volume list. This will most likely fix, at least partially,
98 kes Fix strippath so that it does not get a buffer overrun and crash FD.
100 kes Remove 50 millisec wait in SD that broke debugger.
101 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
102 that a job may run, counted from when the job was scheduled.
103 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
104 a job may block waiting for a resource, counted from when the job starts
105 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
106 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
107 that implements multiple commands per line in the console when using
108 readline. Modify the default to use a semicolon as the command separator.
110 ebl Fix SQL query in migration code.
111 ebl Make accurate mode with hash disk pass regression tests
113 ebl Implement first cut of accurate backup with hash disk.
115 kes Force unload of volume when wrong volume mounted in SD.
117 kes Fix bat seg fault at termination.
118 kes Add Bacula generated version to bat about box.
121 kes Experiment with allowing multiple read jobs.
122 kes Move final volume swapping code to DCR method and
123 call it from acquire_for_read().
124 kes When wrong volume is mounted during read, unload_autochanger.
126 kes Integrate the libdbi changes from Joao Henrique Freitas
128 kes Stop searching for Volumes in SD askdir if DIR returns the
129 same volume name twice in a row.
130 kes Close bat console windows first to eliminate error message
133 kes Tweak the swap Volume from one drive to another code so that
134 it now seems to work.
135 kes Resolve several problems with recycling that broke the new
136 code (these problems are in 2.2.9 as well).
137 kes Remove the volume lock when calling the sysop code.
138 kes Don't mark a reserved volume with no writers as unused otherwise
141 kes Rework class structures for VOLRES, DCR, and DEVICE to make
142 the method names a bit more logical, and for more logically
143 handling the responsibilities.
145 kes Remove redundant code in terminating the scheduler that just
146 causes a seg fault in many cases.
147 kes Cleanup releasing a volume and make it a DCR method.
148 kes Improve algorithm for detecting pre-reserved volume and
151 kes Tweak volume swapping code so it works.
152 kes Correct name overloading in mount.c
153 kes Replace released flag in VOLRES with reserved and add access
154 methods for the VOLRES class.
155 kes Prevent volume from being released while being swapped.
156 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
158 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
160 kes Refactor parts of stored/mount.c
162 ebl Add sanity checks for VolWriteTime and VolReadTime
163 ebl Take care of bad clock changes while computing VolWriteTime
164 and VolReadTime. This should fix or limit #1066
165 kes Correct error string numbers in dird/catreq.c
166 kes Restructure reserving, acquiring, and mounting volumes. Calls to
167 autochanger are deferred for mount.c -- simplifes the code.
169 kes Do not prune any running job. It just fails the job.
170 kes Lock the volumes when changing dev->reserved_device and marking
171 the volume unused otherwise the device can get reserved by
172 another job before the volume is released, thus blocking it.
174 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
175 kes Fix bug #1063, reuse of freed ptr in list nextvol.
176 kes Release regex compile buffer in filed/job.c
177 kes Add proper type of const char in sql_create.c
178 kes Turn off debug in daemon termination routines
179 kes Move free_volume_list() before devices are freed in stored.c
180 kes Fix reference to uninitalized stack variables in bregex.c.
181 This should correct bug #1067.
183 kes Fix possible seg fault in SD when freeing a volume entry.
185 kes Implement unload_dev() before swap device.
186 ebl Add statistics prunning with option and menu
187 kes Separate unload_dev() from unload_other_device() in autochanger.c
189 kes Apply patch from bug #1069 that corrects spurious error messages
190 when ACLs enabled on SGI but no ACL exists.
191 ebl Fix small segfault in bacula-sd when debug level is 500
192 kes Modify run_program() and run_program_full_output() to use
193 call by reference for the results string. This corrects a long
194 standing problem where the address of the string may be changed
195 in the subroutine but not in the calling program.
197 kes Re-enable code to remember last volume mounted on a non-tape
199 kes Add patch supplied in bug #1068 that fixes a SD crash when using
200 a Virtual autochanger.
201 kes Generate correct JobMedia records during spooling/despooling when
202 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
203 <tih@hamartun.priv.no> for excellent analysis and testing.
205 kes Tweak hash algorithm for htable using Martin Simmons idea
206 for doing a circular shift.
207 kes Remember what volume is in VTLs (previously turned off for
209 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
210 pointed out some problems in creating JobMedia records during
211 spooling with concurrent jobs. Fix the problem by updating the
212 start file position before despooling and generate a jobmedia
213 record at the end of despooling.
215 kes Fix handling of JobMedia records during spooling and when a
216 Volume is changed without actually writing data to the Volume.
218 kes Rework certain SD locking based on gdb tracebacks of deadlocks
219 sent by Eric. This code now uses only the volume_lock() rather
220 than the reservations lock when at EOM and acquiring a new
222 kes Ensure only one exit point in several subroutines.
224 kes Implement bsock code to permit locking. Use the new code in Verify
225 in the FD to prevent the heartbeat thread from disrupting the Verify
226 data sent to the Dir.
227 kes Modify SD locking to eliminate locking the reservations system from
228 outside the system. Use the volume lock when getting media data
229 and reserving a new volume at end of media.
230 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
231 when SD starts are not locked into place.
233 kes Fix error compiling runscript code on 64 bit machines.
234 kes Tweak Win32 mount point code.
235 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
236 cleared giving bad file estimate).
237 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
240 kes Keep Schedule run lists in order as suggested by
243 kes Implement autostart scripts for Debian.
244 ebl Implement upgrade catalog scripts.
246 ebl Apply jobstat patch for long term statistics. Have to implement
247 purge stats command and upgrade scripts.
248 kes Fix mtx-changer.in for broken Debian mt program.
250 kes Fix large number of JobMedia records reported by Eric Bollengier.
252 kes Apply doc fix from bug #1062.
253 kes Resolve crash and improper restore wx-console Win32 restore
254 GUI. Fixes bug #1065.
255 kes Update Win32 wxWidgets to latest version.
256 kes Attempt to do correct handling of Win32 mount points. Should
258 kes Fix Win32 FD backup/restore memory leak due to improper termination
259 of BackupRead/Write. This fixes bug# 1038.
261 ebl Reduce memory usage for accurate backup, working only with ctime
262 and mtime. (not all Lstat field)
263 About 40MB for my linux system (400.000 files)
265 kes Add dcr->reserved_volume flag that allows us to release a volume
266 even if it is not vol->released. This allows maxvol2 to work when
267 Volumes expire and we are already writing to the device (i.e. a
268 volume is pulled out from under us by another job terminating after
269 we reserve the drive).
271 ebl Permit multiple command/console per runscript definition.
272 RunScript { command = /bin/true ; command = /bin/false ... }
273 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
274 (restart an application) just after the VSS snapshot on windows.
275 kes Don't zap dcr values during release_volume() as they might
276 have the next Volume to be mounted.
277 kes Fix AIX prototype.
279 kes Second cut of drive switching during backup.
282 kes Update Win32 version of wxWidgets to most recent version.
283 kes Tweak Copy job details.
284 kes Rework dir_find_next_appendable_volume to make a bit more effort
285 to find a suitable volume before giving up.
287 kes Make ask_sysop_to_create... to return if waken from wait.
288 This helps get out of blocked conditions.
289 kes Experimental implementation of switch_device in reservations.
290 kes Implement FD version to allow easier protocol changes.
291 kes Add Plugin Options string -- not yet passed to FD.
292 kes Implement PluginOptions ACL.
294 kes Attempt to correct problems with restores with autochangers and
295 use counts going negative
296 kes Rework SD status command and implement API for bat. Implements
297 header, runing waitreservation, devices, volumes, spooling,
298 and terminated status keywords.
299 .status storage=xxx <keyword>
300 kes Clarify TLS error message by adding double quotes around name.
301 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
302 kes Pass jcr to tls routines so debug messages can be handled better.
303 kes Rework jobq resource allocation code, and possibly fix a bug
304 that caused reference counts to get out of sync.
306 kes Rename fd/dir plugin to use Bacula standard underscore.
307 kes Plugin work -- bring dir up to fd level.
308 kes Start implementation of VTL code
309 kes Fix Win32 build after adding new cats subroutine.
311 kes First cut at Duplicate Job implementation.
313 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
314 kes Start PluginOptions string, and refactor a bit of ua_run.c
315 ebl Apply Allan patch that permit to reset recyclepool.
317 kes Test patch -- possible fix or improvement for bug #1053
318 kes Refactor FD and SD status commands to permit new API code in
319 SD, and to fix Win32 build.
320 kes Win32 build is now working.
322 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
323 some ideas in patch from Scott Bailey.
324 kes Begin implementation of duplicate Job control.
325 kes Fix some of Win32 build after recent additions.
326 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
327 which causes the FD to detect whether or not the OS has the
328 honor no dump bit (*BSD systems), and if so, to skip backing up
329 any file with this bit set. The feature is enabled by setting
330 'honor no dump flag = yes' in the Options section of a FileSet.
332 kes Correct po warning message with datarootdir
333 kes Implement more code in dird.c to put configuration parsing in
334 a class rather than use globals.
335 kes Restructure SD status command for implementation of bat API
338 kes Suppress incorrect 'Will not descend from x into y' messages.
339 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
340 daemon globals used by parser.
341 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
343 kes Fix free of plugin_list when none exists.
345 ebl Apply accurate project patch.
347 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
348 on non-mempool object)
349 kes First cut of converting FD .status to work with bat API.
351 .status client=XXX header
352 .status client=XXX running
353 .status client=XXX terminated
354 kes Implement first cut of Copy Job.
355 kes Implement Catalog in Pool resource. It overrides catalog specified
356 in the Client resource.
358 kes Apply patch (with some difficulties) from Joao Henrique Freitas
359 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
361 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
362 ftruncate() actually works. In the case of some (cheap) NAS devices,
363 it does not, and so recycling NAS Volumes does not work. The code
364 simply unlink()s the file, then recreates it. This fixes bug #1011.
366 kes First incomplete cut of big malloc blocks for htable.
367 kes Tweak plugin code.
369 kes Plugin debug code + tweak a couple bat dialog layouts
371 kes Fix creating first JobMedia record during Migration to include
372 proper index. This caused slow restores of migrated jobs.
373 kes Temp fix to plugin name file_index.
374 kes Bacula backed up and restored a MySQL database.
376 kes Implement plugin restore.
377 kes Implement parsing of db_driver to give db_type index.
379 kes First cut of plugin restore code.
380 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
381 and do not strip paths on symbolic links.
382 kes Set catalog backup database and user name from values specified on
383 the ./configure line.
384 ebl Fix #1031 about wrong pool source information in job report.
387 kes Remove a redundant jcr argument to find_files, match_files, and
389 kes Implement '.status dir header|scheduled|running|terminated' that
390 prints the requested status section. With the exception of the
391 header, the other reports have fields separated by tabs (\t).
393 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
394 a resource embedded run command to find a since time if no explicit
395 since time was supplied on the command line.
396 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
397 that updates the state file at job termination time in addition to
398 when the daemon terminates.
400 kes First version where a plugin did a backup.
401 bpipe-fd.so created a backup file, wrote a test
402 string to it, and Bacua could restore this fabricated file.
404 kes Implement DB Driver = string for the DBI driver.
405 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
406 kes First cut of code for loading Win32 plugin dlls. Implement
407 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
408 and implement a dlfcn.h file based on opengroup's definitions of
411 kes First cut plugin directives.
413 kes Apply patch from bug #1049 to prevent stripping the path on a
415 kes Attempt to fix bug #1047 where stripping a path corrupts the
416 heap. Waiting for feedback.
417 kes Correct the Mount message not to suggest labeling a new tape
418 when doing a restore. Submitted by email by John Stoffel.
419 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
420 FD by using casting. Reported in bug #1042.
422 kes A bit of crypto cleanup. More later.
424 Release Version 2.2.8
426 kes Apply patch from Martin to correct bug #1040, bscan sets existing
428 kes Fixed important spelling error in doc -- bug #1045.
430 ebl Fix bextract to be able to extract non-portable Win32 data to
432 kes Move initialization of read/write res lock earlier in the code.
433 This fixes the crash with a null conf file. This fixes bug
435 kes Redefine CURES in lib/parse_conf to be URES and move it all
436 into lib/parse_conf.c -- this responds to bug #1042, but does
437 not fix it. The fix is not to compile with FORTIFY_SOURCE.
438 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
439 the trunk SVN. I don't think this was reported as a bug.
441 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
443 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
445 kes Add DataDespooling and DataCommitting status (committing is
446 the last despooling).
447 kes Finish implementation of new reservations code noted below.
449 kes Fix bsnprintf for float point numbers. I broke recently when
450 parameterizing some variables. This fixes bug #1036.
451 kes Undo recent reservations changes ... will apply them later
452 when they work better.
454 ebl Fixes #1034 which cause mysql to hang the connection after 8h
455 ebl Change default statistics target of filename.name and path.path
456 fields for PostgreSQL. This speeds lookup by indexes. Thanks
458 kes A few more tweaks to new reservation code. Make sure to clear
459 vol released flag when retaking volume. When reading label and
460 label is bad mark volume unused. When recycling, mark volume
461 unused so it can be renamed.
463 kes Fix reserve_volume() so it doesn't release a volume in use
464 (i.e. a volume entry not marked released). This should be
465 the last part needed to fix bug #1018.
467 kes Move Heartbeat documentation from Job to Director resource.
468 This fixes bug #1033.
470 kes Fix existing switch drive SD code to call autochanger to release
471 any old volume. This must be done to keep the autochanger from
472 releasing subsequently newly reserved volumes in doing a close().
473 This should fix bug #1018.
474 kes Fail if attempting to get console input in batch mode. This
475 should help fail RunScript console commands that are incomplete.
476 kes First cut implementing switch_drive() in SD (not actually called).
478 kes Implement first cut running console commands in a RunScript.
480 ebl Fixes bug #1028 where 'Selection Type' option was not usable
482 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
485 Release Version 2.2.7
487 kes Add new free_tls() entry point so that Win32 builds.
488 kes Fix compile warning in src/lib/util.c
489 kes Fix entry point for edit_job_codes() so that Win32 builds.
490 kes Fix seg fault Frank Sweetser reports in regression testing
491 on his systems. The problem was that the original author of
492 bsnprintf.c did not take into account the side effects of
493 using ++x in the argument to a #define.
494 kes Make SD protocol backward compatible with version 2.2.x.
496 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
497 because Bacula no longer restores sockets.
498 ebl Always use ignorecase fileset option on win32 FD.
500 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
501 that implements double quoting include names in conf files,
502 and also allows piping input by having the first character
503 be a vertical bar (|).
504 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
505 that implement %f in RunScripts to pass the FileSet name.
506 kes Skip leading | when lex input comes from a pipe as suggested
507 by Michael Stapelberg <michael@stapelberg.de>.
509 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
510 Nerijus Baliunas <nerijus@users.sourceforge.net>
512 kes Implement Plugin Directory and plugin events.
514 kes Implement a security enhancement: TLS authentication but no
515 encryption. Enabled by setting 'TLS Authentication = yes'.
516 Note when this is on, TLS encryption is turned OFF!
518 kes This patch corrects a problem where the maximum concurrent storage
519 jobs counter gets out of sync during restore jobs causing jobs to
520 'wait on max Storage jobs'. This patch fixes bug #1009.
522 kes This patch fixes bcopy so that it produces correct Volumes.
524 kes This patch eliminates spurious output to the console during a VerifyVolume
525 job that contains encrypted data. It fixes bug #1024.
527 kes This patch prevents the 'status dir' command from trying to use a scratch
528 volume and possibly moving it from one pool to another. This patch fixes
531 kes Add new include to postgresql.c suggested by Marc Cousins so
532 that it compiles correctly with pgre version 8.3.
534 kes Fix --archivedir addition to configure. Replace it with
535 --with-archivedir in configure.in This fixes the regression
537 kes This patch fixes bug #1012 where the job is canceled because
538 of Max Run Time exceeded when the job has not yet started.
540 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
541 one 'part' to write. Instead of each part being stored on disk,
542 written to DVD, then deleted from disk, all parts are written to disk,
543 and only the last is written and deleted from disk.
544 kes This patch fixes the status command to include the formating string for
545 JS_AttrInsterting. It fixes bug #1021.
546 kes This patch should fix the Mac OS X build problem on the latest
547 Darwin, where sys/types.h was not included correctly (apparently
548 due to a change in the Mac headers). The solution was to explicitly
549 ensure that it is defined for the ./configure.
550 This patch also has a rebuild of configure that includes the Debian
551 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
552 kes This patch should ensure that queued messages to the console are
553 displayed as soon as possible. It should fix bug 1007, but has been
554 reported not to work.
556 kes This patch fixes the infinite loop when trying to increase the
557 maximum number of volumes in a Pool during the add command.
558 This patch fixes bug #1008.
560 Release Version 2.2.6
562 db Remove extra data on estimate command in joblist for bat.
564 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
565 really change anything, but is the beginning of doing it *right*.
566 To do it completely right the LastWritten date must be passed to
567 the SD, but it is not yet done.
568 kes Minor tweaks to some bat restore SQL.
569 kes This patch fixes bug #1003 where putting the message output from
570 a Verify job into the catalog results in a recursive loop. The problem
571 seems to show up only with postgresql (to be verified).
572 kes Correct %x to %p in postgresql debug statement.
574 kes Fix bug #942 where lots of emails where generated when the heartbeat
575 interval was low and Bacula wanted a different tape from the one in
578 ebl Add new SD despooling attributes and Dir inserting attributes
579 job status codes in the catalog (Status table).
581 ebl Use qmake-qt4 instead of qmake when available (debian system).
583 kes Add a security warning to src/cats/make_catalog_backup.in indicating
584 that passing the password via the command line (arg 3) is insecure.
585 This responds to bug #990 (it doesn't fix it).
587 kes Set default debug_level to zero. This corrects bugs #991 and #993.
588 kes Fix a crash in bat when it cannot connect to the Director for example
589 if the Director is not running.
590 kes Remove redundant INDEX (JobId) from File table in the trunk.
592 kes Make explicit exception to GPL in LICENSE to permit linking
593 the Win32 FD with Microsoft VSS code.
594 kes Apply the Solaris package patch from
595 Masopust, Christian <christian.masopust@siemens.com>
596 kes Apply the patch to optionally add a timestamp in the debug output
597 submitted by Mariusz Czulada <manieq@wp.eu>.
599 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
600 backend (sql_strerror). Fixes bug #989
602 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
603 It applied with no problems.
604 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
606 kes Redirect stderror to stdin on mt status command in mtx-changer.in
607 since the status is returned on stderr on Solaris.
608 kes Activate Close button on tray-monitor window. This fixes
610 kes Check for NULL item in parse_conf.c before calling it. In the
611 case of Device, there is no item and this caused a seg fault when
612 Device appears in the conf file.
613 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
614 avoids pulling in config.h multiple times in some new code.
616 kes Fix spurious warning message printed when creating a volume with
617 a LabelFormat. This fixes bug #976.
619 Release Version 2.2.5
621 kes Add JobId in place of Job name in all the Jmsg() output.
622 kes Correct the APP_DESC for the Win32 storage service (remove an e).
624 kes Make maxvol-test and new more strict maxvol2-test work.
625 kes Print JobId in all Jmsg() job output.
627 kes Add new SD despooling attributes and Dir inserting attributes
628 job status codes. This fixes bug 961.
629 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
631 kes Fix doc issue. This fixes bug #963.
632 kes Fix listing performance problems in bat. Pointed out by
634 kes Remove old debug code.
635 kes Fix bat code that tests for Win32. This should fix bug #968
636 kes Query 5 list wrong Vol after migration. This fixes bug #960
638 ebl Fix #969 where user can't change Replace option in restore menu.
640 kes Save jcr in thread specific data (tsd) for each thread.
641 kes Make Dmsg() print JobId as -%u.
642 kes Make Jmsg, Emsg, and others automatically pickup the jobid
643 for the thread if it exists.
644 kes Remove old reservation debug jid code.
645 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
646 ebl Add an option that permit to specify spool size in job
647 definition. (Applying patches/testing/spoolsize_per_job.patch).
648 You must upgrade SD and DIR at the same time.
649 dvl Add new configuration item --archivedir
650 dvl Adjust regression tests to use tmp not /tmp. This will allow
651 multiple concurrent runs of the regression tests.
653 kes Fix race condition that drops final block written to volume.
654 This happens in rare cases with multiple simultaneous jobs
655 when the Volume fills. This fixes bug #964. May be related
656 to bug #935 and possibly #903.
657 kes Eliminate more strerror() and replace with bstrerror().
658 kes Remove BSD getopt and replace with unrestricted IBM version.
659 kes Fix Win32 build for changed calling sequences.
660 kes More tweaks to the mount volume routines to get everything
661 right. Changed variable name from find to have_vol, which is
662 much easier to understand.
663 kes Enhance btimer debug code.
665 kes Fix FD->SD authorization failure, which was due to spurious
666 wakeups from a pthread_cond_timedwait(). Simply check the
667 predicate before continuing. This fixes bug #953.
668 kes Add const char where needed (more to do). Remove temp debug code.
670 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
671 kes Don't overwrite error message in check_tables_version.
673 kes Unlock batch insert tables with same calls used elsewhere.
674 kes Allow starting 59 jobs a second.
675 kes Make SD session key more random.
676 kes Add retry for SQLite opening db if it fails. Probably helps
678 kes Suppress extra error messages during batch insert failure.
680 kes Add jcr to timer packets so if killed message can be sent to job.
681 kes Add JobId to all Dmsg() output.
682 kes Put some FD auth code on dbglvl rather than fixed.
683 kes Return insert attributes error message in db msg buffer to avoid
684 false error messages. Helps fix bug #966.
685 kes Separate batch init error messages. Probably helps fix bug #966.
686 kes Make SD code that contructs attribute insert check string lengths
688 kes If Dir gets an error during inserting attributes, cancel SD.
689 This reduces unnecessary error messages.
691 kes Correct search boolean for getting Volume info
692 ebl Cleanup batch insert code. Probably fixes bug #965.
693 kes Back out one small change to the reservation system (reserving a volume).
694 kes Rework how a Volume is mounted. It is now much more intelligent and
695 will always attempt to use any mounted volume if possible and reduces
696 calls to the Director asking about volumes.
698 kes Turn off some code when batch insert not enabled.
699 kes Edit FD name in connect error messages.
700 kes Rework the reservation system to take into account that the Director
701 might give us a Volume that is different from the current one being
702 used, and to ensure that we don't exceed Maximum Volume Jobs.
703 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
704 fatal error with multiple jobs running'
705 kes Add more debug code in reservation system.
706 kes Implement maxvol-test to check bug #947.
708 kes Add code to handle tray monitor separated from Win32 FD.
709 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
711 kes Add missed return in fixing verify bug -- trunk only.
712 ebl Fix a command parser issue causing a director segfault.
713 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
715 kes Increase the max block size to 4MB fixes bug #957.
716 kes ERABT if user sets min block size > max block size. Fixes bug #956.
717 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
718 is not properly mounted (recognized) during a poll.
719 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
720 Job that has differences reports Verify OK.
721 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
723 ebl Add an option to operate on all pools with update vol parameters.
724 This complete the project 20. Patch from Nigel Stepp.
725 ebl Add history support to bconsole when using readline.
726 Using Ctrl-D to exit doesn't update .bconsole_history
727 kes Modify new volume algorithm to use max MediaId for generating next
728 volume number rather than the count of Volumes. This should essentially
729 eliminate the failure rate if some volumes were deleted. Bug #921.
730 kes Begin implemention of Optimize Job Scheduling.
731 kes Implement restore callback that Dirk and I agreed on for bat
732 restore. This fixes bug #928. Restore of backup of zero files fails.
733 kes Fix SQL Catalog logging which broke with new db_escape_string
736 Release Version 2.2.4
738 kes Fix bacula_cats.def for new db_escape_string().
739 kes Increase size of name string when FD making connection to SD.
740 May fix bug #953. FD->SD connection failure.
742 kes Add code to help Dan debug 2drive-incremental-2disk test.
743 kes Add code to try to fix bug #908.
744 kes Add waits to multiple exit detection code to try to force pid
745 file to always be deleted.
746 kes Restore good dev.tar.gz to rescue set appropriate binary property.
748 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
749 trying to switch drives by checking for blocking before unblocking.
751 kes Cancel storage daemon in all cases where FD reports error. This
752 should fix virtually all cases of bug #920.
753 kes Fix db_escape_string() for MySQL which did not compile.
755 kes Fix error message that was clobbered when Dir tells SD it does not
756 have write permission on Volume. This should fix a minor point
757 in bug #942, but not the main problem.
758 kes Add code to cancel job in SD if FD connection fails. This should
760 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
761 dvl Pass jcr and db into db_escape_string() to enable better escaping
763 kes Fix migration code to get correct Volume name with multiple volumes
764 by skipping |. Fixes bug #936.
765 kes Implement patch supplied by Landon to fix bug #944 where using
766 TLS with bconsole uses 99+% of the CPU.
767 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
769 kes Move patches into patches directory.
771 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
774 ebl Using 'm' in bconsole will show messages like before,
775 and not memory usage.
776 kes Fix bug #935, and probably also bug #903 where files were not
777 restored. MediaId was not properly set in JobMedia record after
780 kes Suppress chown and chmod error messages if the FD is not running
783 kes Apply Martin Simmons' patch that should turn off the new API usage
784 when batch insert is turned off allowing building on older
786 kes Add ./configure search in qwt-qt4 for qwt package
788 kes Bacula is now free of 3rd party GPL copyrighted code!
790 kes Add guid_to_name.c/h which replace idcache.
791 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
793 ebl Detect if new PosgreSQL batch insert API is present.
794 kes Correct incorrect mempool call causing Director crash. Occurs on
795 systems without va_copy().
796 sb Update spec files for 2.2.1 release
798 kes Fix memory pool call in ua_output.c. bug #934.
799 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
800 Add test program to fnmatch.c
802 kes Integrate patch to README.vc8 from
803 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
804 edit it to get it into Unix patch format.
805 kes Implement mkpath.c to replace old FSF makepath.c
807 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
809 Release Version 2.2.1
811 kes Update POTFILES.in
812 kes Cleanup a few underquoted AC_DEFUNs in configure
813 kes Apply patch from Martin Simmons that adds a test for va_copy to
816 kes Fix bug #921 by increasing the number of tries to create a new volume
818 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
819 can be called multiple times. Implement a version for machines
820 without va_copy() that gets a big buffer.
822 kes Integrate more portable zone offset code into bsmtp.c
823 Submitted by Attila Fülöp.
825 kes Fix bad SD->FD return status reported by
826 (James Harper) <james.harper@bendigoit.com.au>
827 ebl Fix a bug in read_close_session which return random status
828 thanks to James Harper
830 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
831 and directory names during restore of single file/directories.
832 kes Add sanity checks to .sql command when string is empty. Hopefully
833 that will resolve Dirks Director crash.
835 kes Apply patch submitted by Martin Simmons that corrects a seg fault
836 in the bsmtp chat subroutine when debug is >= 10.
838 kes Fix Director crash when running bat SQL queries.
839 kes Add David's notes on Item 8: Copy pools.
841 kes Rework projects file to be current and ready for a vote.
842 kes Enhance lex scanner error message.
844 kes Tweak LICENSE file to mention BSD code.
845 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
846 if specified on the ./configure.
847 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
848 This class is intended to allow us to open a second bsock to the
849 Director while in the restore subdialog.
851 kes Fix configure to create bat Makefile before creating dependencies.
852 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
853 kes Add a tooltip to the tray monitor.
854 dvl Set the Director's PID file before dropping privs. This fixes
857 kes Update AUTHORs file
858 kes Increase the default max concurrent jobs to 20 in FD and SD to
859 correspond with the default .conf files.
860 kes Rewrite the Win32 service routines. This eliminates the 3 copies
861 some different, of the same file created by RN when porting the
863 kes Rearrange some of the Win32 directories and the placement of the files
865 kes Set DEVELOPER flag in version.h
867 ========================================================================
868 Release Version 2.2.0
870 kes Apply a second doc patch from Marc.
871 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
872 improves the tips section that discusses how to setup multiple
875 kes Update bat README file.
876 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
877 corrects a typo in the Recycle status check in db_find_next_volume().
878 This will probably fix a number of annoying problems with multiple
880 kes Modify most of dird/msgchan.c to use bsock class calls rather than
881 bnet calls -- no functionality change.
883 kes Modify the Verify output to specify if files are missing on
884 the Volume(s) or disk. Fixes confusion in bug #916.
885 kes When more than one Volume is read in a migration job, the last
886 Volume bytes reported are from the last read volume rather than
887 the last written volume. Fixed. This fixes bug #910.
888 kes Fix display of Recycle flag after update volume=foo recycle=yes.
889 It previously printed New Recyle flag is: no. This fixes bug
892 kes Correct seg fault when switching tape drives during restore.
893 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
894 be used until after 2.2.0 release.
896 kes Remove fnmatch() in SD that permitted wild card specifications.
899 kes Fix %g in filename returned by SQL for browse tree reported by
901 kes Fix configure so that it puts config.out in the cwd rather than
903 kes Attempt to fix the locking problem reported by Eric in bug #906.
904 kes Make berrno class to leave errno unchanged after constructor call.
905 kes Make bnet_server use the heap rather than the stack to allocate
906 its socket fd pointers to avoid a crash at termination. Problem
907 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
909 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
910 and putting it in depkgs-qt along with Qt4.3.
912 kes Rework code in acquire.c that switches drives for reading when
913 the Media Type does not match. This should fix bug #906
915 ebl Fix a director segfault during job setup #907
916 kes Correct seg fault in postgresql when first operation returns no
917 rows. Fixes Dirks File browser problem seg fault with bat.
919 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
920 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
923 kes Implement PopUp YES/NO dialog for bat.
925 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
927 kes Correct RunScript to terminate job in FD on failure.
928 kes Change abort_on_error and AbortJobOnError to fail_on_error
929 and FailJobOnError in RunScripts.
930 kes Minor tweaks of code formating in RunScripts, principally to
931 avoid depassing 80 columns.
933 kes Eliminate one #ifdef Win32 in bsmtp
934 kes Implement grow tool to grow a file for testing very large databases.
935 kes Add big-vol-test to test Bacula seeking with > 5GB.
938 kes Modify find_next_volume() to return all values in Media record.
939 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
943 kes Update Release notes
945 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
946 Warning, in previous beta version, all media get from scratch keep their
949 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
950 This should fix bug #842. Made a note to look at removing the temp
951 files at the end of the install.
952 kes Add ability to mount and unmount a file device providing it is
953 marked as being removable and has the appropriate mount and unmount
954 commands defined in the Device resource. This fixes bug #830.
955 kes When applying a storage override, release all previous storage
956 definitions rather than just prepending the new storage.
957 This should prevent a good deal of confusion.
959 kes Implement ./configure search for qwt libraries.
961 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
962 Win32 FD. This should fix bug #893.
963 kes Remove an unnecessary beep in Win32 init code.
964 kes Update copyright dates in Win32 executable about boxes.
965 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
966 code with a BSD getopt.c and getopt.h.
967 kes Remove sched.h from the Win32 compat directory -- not used.
968 kes Remove the Exit menu item from the Win32 tray monitor. If you really
969 need to shut it down, do it through the services panel or the command
971 kes Remove some inappropriate Bacula FSFE copyrights.
972 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
973 kes Fix regress config non-portable test as pointed out by
974 Florian Heigl <florian.heigl@gmail.com>
975 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
976 as pointed out by Florian Heigl <florian.heigl@gmail.com>
978 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
979 Reported by Frank Sweetser.
983 kes Fix client-only build.
984 kes Integrate client-only fixes for bsys (initgroups) and conio from
985 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
986 kes Make arguments to get_scratch_volume() in same order as other
988 kes Rework the prune_volumes() subroutine so that after purging and
989 no volume found in desired pool, it will check for a scratch
990 volume. This prevents recycling the whole scratch pool.
991 kes Add code to status storage to print boffset_t (largefile support).
993 kes Move qwt (Graphics libarary for Qt4) to depkgs.
994 kes You now need a --with-qwt=<dir> to be able to build bat.
995 kes Update src/win32/cats/bacula_cats.def to include the new
996 db_get_query_dbids() call on Win32.
998 kes Correct a problem when selecting a scratch volume and moving
999 it to another pool that lost some columns.
1000 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1001 kes Enhance Autochanger error messages to include Volume and device name.
1002 kes Rework prune_volumes() code to take account of InChanger flag,
1003 and to handle recycling volumes going to the Scratch pool and
1004 current pool because the RecyclePool directive.
1005 kes Implement a better and more efficient db_get_query_dbids() to
1006 handle creating and passing back a list of DBIds.
1010 kes Start work on new more efficient DBId subroutine. First use
1011 will be for recycling volume to Scratch inchanger.
1012 kes Increase number of JobIds in pruning from 1000 to 10000.
1013 This to be replaced by above routine.
1014 kes Begin implementation of building Qt4 on Win32.
1015 kes Correct typo in fix I added for bad TLS shutdown.
1016 kes Pull 2.0.3 patches into patches directory.
1017 kes Update Release notes. Include qt-console in line count.
1018 kes Update Projects file.
1020 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1021 bug in migration code where a job that spanned two volumes
1024 kes Implement new BST_DESPOOLING blocked state. Change from locking
1025 during despooling in SD to blocking. This means that other threads
1026 can work with the device structure, in particular the reservations
1027 system while despooling.
1029 kes Fix return in reservation message queue that missed clearing
1030 the jcr lock (implemented 26Jun07 below).
1031 kes Rename a number of dev methods to make locking function names
1033 kes Document locking in lock.c. Move lock structures to new file
1036 kes Move reservations message lock to lock jcr only this
1038 kes Move main SD locking code into lock.c (new file).
1039 kes Update Win32 build to include lock.c
1043 kes Dirk committed the qwt library code for drawing graphs in bat.
1044 kes Tweak install of qwt so that it is integrated with ./configure.
1046 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1047 out by Eric (my typo).
1048 ebl Fix configure.in to get batch mode enable
1049 kes Return correct string from authenticate.cpp in bat when connecting
1051 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1052 spurious line drops when using TLS.
1053 kes Do not file reparse points when restoring a file that already
1056 kes Implement Windows reparse points -- similar to directories, but
1057 we do not descend into it. This is a first cut. They seem to
1058 be backed up, but restore is not yet tested.
1059 kes Remove restore_blocking in tls code when shutting a socket to leave
1060 it in blocking mode. Hopefully this will fix the encryption bug
1061 reported by Frank Sweetser.
1062 kes When opening a file for backup, tell the OS that we are going to
1063 read it sequentially -- optimization.
1064 kes Change variable names in authenticate_director() to not conflict
1065 with member names in bat. Caused great confusion with compiler,
1068 kes Queue openssl error messages in case of comm problem.
1069 kes Do shutdown() call if socket terminated.
1070 kes Remove some duplicated code in tls.c
1071 kes Move more of the bsock member variables into private and access
1073 kes Add Frank Sweetser's tls-test to the regression suite.
1075 kes Add Swedish sv.po file
1077 kes Don't print clock skew message in FD if less than 3 seconds diff.
1078 kes Add a bit of VSS info to status client.
1079 kes Implement a first cut of Vista VSS, using Win2003 code.
1081 Release: 2.1.20 beta
1083 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1084 loaded tape but uses first drive).
1085 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1086 This was indeed a Win32 issue.
1088 kes Simplify search of autochanger for in-use Volume.
1089 kes Fix exit condition of check for in-use volume. kes Remove
1090 inappropriate my_postgresql_free_result() in db_close()
1092 kes Fix bad return in FD when encryption signature not found.
1093 Probably caused a crash.
1094 kes Inhibit missing encryption signature error messages for
1095 file types where no signature computed.
1096 kes Correct inverted check on autochanger in reservation system.
1097 kes Tweak debug code in autochanger reservation.
1099 kes Add some additional locking in the cats directory in subroutines
1100 that modify packet variables called from batch insert.
1101 kes Rework how dcrs are allocated. new_dcr() can now be called
1102 with an existing pointer, and it will simply clean it up.
1103 This allows the reservation system to test various different
1104 devices, and will permit easy device changes.
1105 kes A bunch of changes all over to handle new new_dcr() calling
1107 kes Work more on the Volume management in the SD. Remember Volumes
1108 for tape drives and for autochangers (even virtual disk changers).
1109 kes When looking at the Volume list to reserve a drive, handle
1110 autochanger names correctly by interating through the changer
1111 devices. Also call the Director to see if a Volume is suitable
1112 for the current job.
1113 kes Fix some bugs in bscan. Make sure all media records are written.
1114 Make sure that valid JobMedia records are written for disk files.
1115 Previously they were completely wrong.
1116 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1117 that the URLs don't change and so that the developers will all
1118 work off the same copy. Rebuild from scrach.
1119 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1121 Release: 2.1.18 beta
1123 kes Fix seg fault in FD from incorrect digest size.
1124 kes Fix argument to non-OpenSSL crypto.c subroutine.
1126 Release: 2.1.16 beta
1128 kes Remove a few malloc()s from the encryption code.
1129 kes Use the class calls to bsock in filed/backup.c and restore.c in
1130 place of the old bnet_xxx code.
1131 kes Implement code that does an on the fly calculation of the
1132 signing digest during restore of encrypted files. It makes
1133 a best guess at the algorithm, and if it is not correct, will
1134 then revert to the old code which reads the file after it is
1136 kes Implement at least one missing crypto stream in stream_to_ascii()
1137 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1138 #877 where a reload with bad syntax causes Dir to exit.
1140 Cut: 2.1.14 beta (not released)
1142 kes Do not free a volume on a tape drive until another volume is
1143 mounted and read, or the autochanger unloads the volume.
1144 This should help the SD re-use volumes that are already mounted,
1145 and should fix bug #886.
1146 kes Apply patch from user brettedgar that allows gnome2-console include
1147 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1148 kes Apply patch from Lucien Weller that fixes day of week calculation
1149 because of DST flag problem. Fixes bug #887.
1151 kes Move find_next_appendable_volume() to after acquiring a valid device
1152 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1154 kes Unable to reproduce bug 872. However added additional testing for
1156 kes Bug #874 resolved by documenting SQLite limitations.
1157 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1158 kes Bug #881 resolved by removing typo in mtx-changer script.
1159 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1160 approval. Added a link to the wiki on the web page, and implemented
1161 a backup from http://paramount.ind.wpi.edu
1163 kes Fix update allfrompool to pass pool name.
1165 kes Convert to pure GPL v2 license.
1166 kes Fix sscanf problems reported by Peter Buschman that caused
1167 a bus error on Solaris.
1168 kes Rework (simplify) the select prompt in bat.
1169 kes Move get_jobid_from_tid() into lib and create a
1171 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1172 should definitely fix the problem of lost error messages in the
1174 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1175 kes Eliminate tcpd.h from the project. Enclose the #include from the
1176 library with extern C ...
1177 kes Add print of signal name when a signal is trapped.
1179 Release: 2.1.12 beta
1181 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1183 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1184 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1185 makes SQLit3 run 30 times faster, though a bit less safe.
1186 kes Implement --with-batch-insert in configure and detection of thread
1187 safe libraries. It is on by default, but turned off if no thread
1188 safe library (e.g. SQLite 2) is available.
1190 kes Fix Bacula PostgreSQL buffer overruns.
1191 kes Do better checking for NULL results returned from PostgreSQL;
1192 implement retry for failed queries; clear results buffer after
1193 failed query. Hopefully this will correct the PostgreSQL failures.
1195 kes Implement algorithm to handle only one appendable volume with
1196 Prefer Mounted Volumes = no.
1197 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1198 returned from a query.
1199 kes Make volume lock recursive.
1200 kes Implement an additional volume reservation algorithm that
1201 starts by considering all reserved volumes then uses the
1202 old brute force algorithm of searching the resources to
1203 find a suitable device.
1204 kes Add new reservations debug code and refine the old code.
1205 kes Update the win32/dll/bacula.defs file.
1207 kes Tweak reservations algorithm to permit a few more cases, i.e.
1208 volume reserved, but on different drive, ...
1209 kes Enhance SD status to include Pool and Media Type for drive in a
1210 more readable format (a bit longer).
1211 kes Fix PostgreSQL double free.
1213 kes Minor refactoring of restore decryption code.
1214 kes Add code to smartall.c to detect double free of a buffer.
1216 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1217 so that bsmtp will create a correct email address (mailbox only).
1218 kes Modify 'memory' command so that the buffers are listed as 'In use'
1219 to avoid confusion with Orphaned buffers.
1220 kes I reworked the OpenSSL include/lib flags to be handled in
1221 the standard Bacula way, which should fix bug #863 concerning
1222 non-standard OpenSSL libraries.
1224 kes Implement Help Browser window for bat.
1225 kes Fix reload bug that reset StorageId to zero.
1227 kes Fix TLS #ifdefing when TLS turned off.
1228 kes Ensure that when labelling a tape with Slot=0 that InChanger
1230 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1232 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1233 add DISTINCT (required by PostgreSQL).
1234 kes Implement BSOCK authenticate_director() method. Eventually will
1235 authenicate all daemons.
1236 kes Move several more functions into the BSOCK class.
1238 kes Add code to tell the OS that we no longer need a cached
1239 file that we were reading. In findlib/bfile.c. Also,
1240 only cache files that we are reading. Thanks to
1241 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1242 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1243 kes Implement script to automatically generate cats and dll .def
1244 files for Win32 dll.
1245 kes Update README.mingw32 to include new .def file generation.
1246 kes Correct typo in UTF-8 error message as reported by:
1247 jhernandez <julianhernandez@gmail.com>
1248 kes Add additional sm_check() code on debug level 1.
1249 kes Set default debug level to 1.
1250 kes Trap SIGABRT in attempt to get traceback.
1252 kes Reduce bat connect timeout from 30 to 15 seconds.
1253 kes More restructuring and implementing BSOCK class in place of
1255 kes Remove a few unnecessary malloc() tests in crypto code.
1256 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1257 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1258 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1260 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1262 kes Fix Verify InitCatalog. The attributes were not pointing to the
1263 correct saved location.
1264 kes Implement message callback so that GUI is sure to get all
1265 daemon messages. Currently displayed in a dialog in bat.
1266 kes Ignore SIGUSR2 (Bacula timer) in bat.
1267 kes Apply regress patch from bug #859 to allow regress to work
1268 with Solaris compiler.
1270 kes Begin adding TLS support to bat.
1271 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1272 clean up lex.c and make it more readable.
1274 kes Move more bnet functions into the BSOCK class.
1275 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1276 kes Complete change of berrno strerror() method to bstrerror()
1278 Release: 2.1.10 beta
1280 kes Cleanup incorrect email addresses in bsmtp.
1281 kes Make bat display initial messages rather than discard them.
1283 kes First cut of adding .mod to the run command.
1284 kes Implement auto display of messages in bat.
1285 kes Enhanced preferences to allow all Bacula output to be
1288 kes Try to make bsmtp date routines more generic.
1289 kes Fixed bug #856 autochanger documentation.
1290 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1291 kes Add new cats entry point so Win32 builds.
1293 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1295 kes Do better checking for the MySQL 64 bit libraries looking for both
1296 .a and .so libraries.
1297 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1298 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1299 kes Require the thread safe version of MySQL during configure. Thanks
1300 to Andre Noll for pointing this out.
1301 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1302 continuing in migration code.
1303 kes Apply implementation of tray-monitor font derived from gnome-console
1304 submitted by Andreas Piesk <a.piesk@gmx.net>
1306 kes Eliminate important memory loss in SQLite
1307 kes Fixed the batch insert MySQL thread specific data that was not
1308 being freed. See cats/mysql.c:db_thread_cleanup().
1309 kes Fix restore before command.
1310 kes Convert old hdr.name to name() in a few places.
1311 kes Implement update jobid command.
1312 kes Return all time_t dates in db_get_job_record()
1313 kes Stop watchdog in SD earlier.
1314 kes Put Pool just after Storage in please mount message.
1315 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1318 kes Update the po files.
1319 kes Fix Verify InitCatalog by making it cache attributes.
1321 kes Change name bacula-bat to bat for man 1 page to correspond to
1323 kes Check for client and store NULL pointers in status command. This
1325 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1326 kes Fix sign extended editing of %p.
1327 kes Clean out a little old #ifdefing in cats/mysql.c
1329 kes If time diff between DIR and FD is more than 600 seconds convert
1330 INFO message to WARNING.
1331 kes Implement heap size display in status for all daemons.
1332 kes Attempt to fix MySQL db open memory loss (not successfull).
1333 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1334 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1335 Query. This looks like a MySQL but but by doing extra releases,
1336 the memory goes away. This should fix bug #847.
1338 kes When backup fails, cancel SD before waiting for sd termination.
1339 kes If SD is waiting for FD to connect during cancel, wake up the
1341 kes Fix fsf code so that errno is correctly reported.
1342 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1344 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1345 so that Bacula doesn't later stumble into a seg fault.
1346 kes Use the term Restore Client in the restore Job report.
1347 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1348 the original job's FileSetId.
1349 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1350 spooling in migration jobs. Not yet tested.
1351 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1352 reading conf file from a pipe. However, do it with open_bpipe()
1353 rather than popen. Not yet tested.
1355 kes Fix an ugly bug where the VolCatBytes were getting updated
1357 kes Implement bconsole memory command that prints current memory
1358 usage, plus smartalloc dump.
1359 kes Clarify some error messages in backup, admin, and migrate.
1360 kes Shrink label dialog to smaller size.
1361 kes Invert Cancel OK buttons on restore to be OK Cancel.
1362 kes More strerror() to bstrerror() conversions.
1364 kes Start implementing bstrerror() in place of strerror().
1365 kes Stripping path -- seems to work.
1367 kes Prevent door and port files from being restored (mostly
1369 kes Free an unreleased buffer in compat code.
1370 kes Change console Job name from *Console* to -Console- to eliminate
1371 Win32 filename problems. Put Win32 path separator when creating
1372 Console file. This fixes bug #846.
1373 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1375 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1377 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1378 to force Win32 error message.
1380 kes First cut strip path. The data should be passed to the FD,
1381 but nothing is done with it yet.
1382 kes Enhance the digest and signature routines in the crypto
1383 library to accept a JCR and to use it to print error messages
1384 so that they will go in the Job report rather than the daemon's
1386 kes Simplify some of the verify signature code.
1387 kes Simplify a few of the alternative returns in the signature
1390 ebl Use only POSIX regex instead of GNU regex in breg.c for
1391 File relocation. It fix broken freebsd compilation.
1392 kes Convert all other Dir files to use new ua class message
1394 kes Tentative fix for missing digest signature in bug 807.
1395 kes Correct handle problem in new win32_ftruncate routine.
1396 kes Convert ua_purge.c and ua_update.c to use new ua class
1397 message routines for bat.
1399 kes Correct incorrect installation of LICENSE in Win32 installer.
1400 kes Display LICENSE at the beginning of the Win32 install.
1401 kes Attempt to correct the need for the png files to be installed
1403 kes Reapply my bat.conf install script in qt-console. I think I
1404 editted bat.pro instead of bat.pro.in and it was lost.
1405 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1406 the /var/lock/subsys for subsysdir. Also corrects typos in the
1409 kes First cut update job.
1410 kes Correct configure to include qmake of src/qt-console directory.
1412 kes Make restore job yes/mod/no print in one command so GUI works.
1413 kes First cut implementing backup and restore client.
1414 kes Correct editing in Verify output that caused a seg fault.
1416 kes Insure that bat.conf is not overwritten during installation.
1417 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1418 while I was implementing migration in March 2006 !
1420 ebl Cleanup file relocation, using char *RegexWhere instead of
1421 char *where + bool where_use_regexp
1422 kes Update some manpages and add bat manpage.
1423 kes Make a first cut at converting bacula.spec.in for bwx-console
1425 kes Apply patch from John Goerzen to add hostname as fourth argument
1426 to make_catalog_backup script.
1427 kes Fix typos I introduced into bsmtp.c
1428 kes Make pm_strxxx() routines handle input of NULL pointer. This
1429 is to protect from NULL pointers returned from SQL databases.
1430 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1431 kes Add more debug to FIFO code -- fix fifo regression test.
1433 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1434 kes Add thread timer to bnet_connect() to break from OS if wait time
1437 kes Update Win32 build to include new files, new symbols, and
1439 kes Implement socket level heartbeat (tcp_keepidle)
1440 ebl Commit File relocation patch
1441 kes Make bat have 'make install' target.
1442 kes Warn during install if old gnome-console binary found.
1443 kes Warn during install if old wx-console binary found.
1444 kes Add -8 option to bsmtp command line to add content type utf-8.
1445 Fixes bug #809. (Character coding problem in bsmtp).
1446 kes If < is found in target (from, to, cc) then do not enclose the
1447 target in < > in bsmtp. Fixes bug #772 (malformed address).
1448 kes When printing certain items in dbcheck, stop after 300000.
1449 Fixes bug #822. (dbcheck loops).
1450 kes Incorrect status in Dir after waiting for mount with poll set.
1453 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1455 kes Print waiting to reserve a device every 5 mins.
1457 kes Don't call close_part in label.c if tape and relabel.
1458 kes Don't free volume if busy in close() -- should help with
1460 ebl Fix #824 RunScript bug (After script could be execute twice)
1461 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1462 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1463 Add a regression script to test RunScript
1465 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1468 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1469 deprecated. No additional bugs will be fixed, and they will be dropped
1470 in a future release (probably 2.4.0).
1471 kes Change name of wx-console to bwx-console to make it more Bacula
1473 kes Change the name of gnome-console to bgnome-console to make it
1476 kes Some time in March, a Feature Request with patch from Jorj Bauer
1477 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1479 The ability for the director to validate a Client (FD) CN against
1480 an arbitrary set of patterns rather than the hostname, with
1481 A new 'TLS Allowed CN' set of directives which are implemented
1482 in the Client resource. Then pattern matching is used in place
1483 of hostname matching against the Certificate's CN. As an example, we
1484 have certificates which (a) use a local CA, and (b) have a CN of the
1486 kes Add new/changed entry points to Win32 build
1487 kes Create unaccepted-projects for projects that are not accepted.
1488 kes Simplify locking in the reservations system.
1489 kes Add more debug code in reservations.
1490 kes Make sure error condition on reserving a volume is handled correctly.
1491 kes Correct handling of volume_in_use.
1492 kes Correct handling of initializing a device.
1493 kes Move handling of broadcasting releasing a device into release_device().
1494 kes Correct attaching dcr to dev so that it is only done if device
1495 is properly initiated.
1497 kes Locking debug level tweaks in SD.
1498 kes Tweak new Volume code.
1500 kes Add exec external-command [wait-seconds] to bconsole. This
1501 executes the external-command. Note! normally external-command
1502 should be enclosed in double quotes.
1503 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1504 it should normally be off in a production system.
1506 kes Implement die command for SD so that we can force it to dump.
1507 kes Implement SD lock debug code.
1508 kes Implement new algorithm for keeping Volume list in SD. It
1509 is now owned by the device.
1511 kes Implement new code for freeing in use volumes that should
1512 resolve if not all, some of the problems of multiple drive
1513 tape conflicts described in bug 801.
1515 kes Fix gui/bacula-web/images files in svn.
1516 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1518 ebl Fix a bug in batch mode (in string escape)
1519 kes Correct migration prune SQL typo that crept in in a
1520 recent 2.1.x change.
1522 kes Move bnet_despool() into class in bsock.c
1523 kes Modify job report to include director name and Build OS.
1524 kes Move drop root privilege and check_catalog() before fork.
1525 kes Add update database scripts (version 9 to 10) to updatedb directory.
1527 ebl Check size and age of each file after its backup to see if
1528 it has changed during backup, if 'checkfilechanges' is set.
1529 The FD will do an extra check (stat(2)) after
1530 each file backup. mtime, ctime and size are compared with
1531 'before backup' information. If time or size mismatch, an
1532 error message will be generated. You must upgrade FD to use it.
1534 kes Make database name and user configurable
1535 --with-db-name=xxx --with-db-user=xxx
1536 kes Add back database type to message.c for debugging.
1538 kes Implement dir_sql() which issues an SQL query.
1539 kes Modify bat medialist to use dir_sql() and do some minor C++
1540 formatting as well as eliminating a number of pointers, simplifing
1543 kes Fix some of the mtx-changer grep commands for tape label readers.
1544 kes Convert a number of bsendmsg into the appropriate send/warning/error
1545 message class calls.
1546 kes Suppress the using database message in the .sql command.
1547 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1549 kes Add context menu for floating a window.
1550 kes Some minor cleanup and name changes in qt-console
1551 kes Add doing mt setblk 0 in Win32 mtx-changer.
1552 kes Apply Martin's bug fix to move definition of ENODATA for
1554 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1555 sqlite2 and sqlite3.
1557 kes More pruning cleanup.
1558 kes Turn on wait_for_drive by default in mtx-changer.
1559 kes Turn on Batch insert code by default as it now passes regression.
1560 kes Add ./configure --enable-bat to enable building of Bat.
1561 No install yet though.
1563 kes Implement a new .sql command for bat.
1564 kes Implement code to turn off pruning in obtaining the next volume.
1565 Pruning is turned off for the status dir command, but turned on
1566 for SD requests and for the list nextvolume command.
1568 kes Correct Qmsg() that was not updated correctly when committing a
1569 previous change (probably the recent TLS patch).
1571 kes Write new subroutine is_volume_purged() that explicitly checks
1572 if the Volume is purged, and if so marks it as such. This should
1573 resolve problems reported about needing to mount twice to recycle
1575 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1576 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1577 amount of duplicated code.
1578 kes Do volume pruning only for the Media Type desired (reduces pruning time
1579 if multiple Media Types are in the same pool).
1580 kes Implement more detailed info in the Job report for the Bacula version
1582 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1584 ebl Add bbatch tool to bench database and insert mode.
1585 Fix sql quote stuff in batch mode
1586 Fix sql stuff for mysql
1588 kes Correct problems with am/pm scheduling. Fixes bug #808.
1589 kes Implement new prunning code that prunes up to 1000 jobs at
1590 the same time. The same technique can be applied to a number
1591 of other prune/purge subroutines.
1592 kes Add an insanity check when starting a new tape job to ensure
1593 that the tape position has not been changed. If so fail the
1595 kes Fix Win32 build for dlls to add the folllowing:
1596 src/lib/bsock.c -- new file with new entry points
1597 src/lib/dlist.c -- new entry points
1598 src/cats/sql_create.c -- new entry point
1599 src/cats/sql_cmds.c -- new DATA item exported
1601 ebl batch mode cleanup bscan-test is ok now.
1602 kes Implement SD code to check length of disk volume before appending.
1604 kes Correct return status on db_batch... routines.
1605 kes Add call to db_write_batch_file_records() to migration code.
1606 ebl Fix AfterJob timing
1607 kes Move the checking of the database in initializion of the Director
1608 to after we drop privileges. This avoids the need for both root
1609 and bacula access to the DB.
1610 kes Correct a misplaced variable definition in src/filed/backup.c
1611 kes Correct how the new batch insert db_create_attributes_record()
1612 uses the arguments. Caused a seg fault in bscan.
1613 kes Implement lock() and unlock() methods in DEVICE class.
1614 Implement block() and set_block(xx) methods in DEVICE class.
1615 kes Modify bnet_connect() so that it uses time() to check for the
1616 wait time expiring (on some OSes, some system calls may not
1617 return immediately).
1618 kes Modify Verify to obtain the previous JobId when it is actually
1619 running rather than at schedule time (as it was in 1.38.x).
1620 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1622 kes When checking pid in pid file, continue running if the pid is
1623 the same as ours. This occurs on IRIX after a system crash.
1626 kes Extend new GUI API.
1627 kes Make the ua structure a class, and implement send_msg(),
1628 error_msg(), warning_msg(), and info_msg().
1630 kes Apply fix from for building wx-console on the Mac from
1632 kes Implement new select mechanism for GUI programs.
1633 kes Reorganize initialization of stackedWidgets in bat.
1635 kes Add updated nagios plugin supplied by Christian Masopust.
1637 kes More bat implementation.
1638 kes File migrate bug with Pool Occupancy using mediaid instead
1639 of jobids. Fixes bug #795.
1640 kes Fix orphaned buffers in filed backup and verify due to
1641 crypto buffers not freed during errors. Fixes bug #789.
1642 kes Extend new GUI api code to tree commands.
1643 kes Ensure that tree and dot commands check console ACLs.
1644 kes Permit marking directory with trailing slash.
1645 kes Allow 20 console connections (instead of only 10).
1647 kes Add smartctl call to bacula-sd.conf as an example of getting
1650 kes Modify jobq.c to let simultaneous restore jobs run. This may
1651 cause them to fail if they cannot get a drive.
1652 kes Add Client Connect Wait to Storage daemon to permit users to
1653 modify the time the SD waits for a FD connection.
1655 kes Correct virtual changer check which was backwards. This caused
1656 volumes to be unloaded into slots already occupied.
1658 kes Apply Command ACL filter to JobId list in restore command.
1659 kes Correct typeo in var.c patch.
1661 kes Don't let Bacula prune File or Job records for the current Job.
1662 kes Fix variable substitution pad + inc bug reported (with patch)
1665 kes Correct SQLite log table index as reported by Luca Berra.
1667 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1669 kes Begin implementing new comm signals for API.
1670 kes Fix a few places in lib/message.c where the open fd may
1672 kes Continue implementing lib/bsock.c (real class). Make jcr,
1673 who, host, and port private. There are new methods to access
1674 them for non-class use. This required touching a number of files.
1676 kes Add LANG=C to autoconf/randpass so it works with languages other
1677 than English. Fixes bug #788.
1679 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1681 You will not be able to generate Include/Exclude list any more.
1682 It will be fixed soon.
1683 If you want to use this, you can apply
1684 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1686 kes Restore of sockets created false error messages because Bacula
1687 no longer restores sockets, but the code was still trying to
1688 set the attributes on a non-existent file. Reported by a user.
1689 ebl finish RecyclePool feature
1690 Media will takes Pool.RecyclePool
1691 when moving from Scratch to a Pool or when user will do
1692 update volume=xxx frompool
1693 To use it, add RecyclePool = aPool to your Pool resource
1696 RecyclePool = Scratch
1700 kes Expand new BSOCK class adding signal() and new BNET signals.
1701 kes Begin enhancing the dot commands adding a new API function
1702 that returns more information and will make it easier
1703 to interface to the Director from a program.
1705 kes Make DEVICE fd private. Its new name is m_fd, and can be
1706 obtained with dev->fd() outside the class. This is the
1707 first of many DEVICE members to be made private.
1708 kes Implement Michael Renner's idea on having a virtual disk
1709 changer. I made some minor modifications (e.g. I did not
1710 implement the Virtual Changer directive, but simply set
1711 the Changer Command to an empty string.
1713 kes Implement a BSOCK send() method that writes the whole record
1714 in a single write() request rather than in two.
1715 ebl add update volume=xxx recyclepool=yyyy
1716 volume takes recyclepool from pool when using update volume=xxx from pool
1718 kes Fix encryption deblocking bug, which caused some restored files
1719 to be truncated. This fixes bug #763.
1720 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1721 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1723 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1724 ebl Use btime_t instead of uint64_t in media patch.
1726 kes Optimize the use of the database a bit in the Status dir command.
1727 Only open it when needed, ensure that if any previous database
1728 was opened, it is closed.
1730 kes Correct VolCatBytes bug from media patch.
1731 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1732 in the case of orphaned records.
1733 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1734 and File records in 300K chunks to be more efficient. This
1735 idea came from Juan Luis Frances (if I remember right).
1736 kes Apply Eric's scratch patch that moves a purged Volume to
1737 the RecyclePool. Question: how is RecyclePool set? what
1738 happens to the ScratchPool?
1739 kes Apply Eric's media patch that collects read/write media
1740 times as well as byte counts. This patch requires a
1741 simultaneous upgrade of the DIR and SD. Note, there
1742 should be some way to turn off timing. I'm not sure
1743 times are in Bacula units.
1744 kes Apply Eric's batch-insert patch.
1746 kes Update projects list.
1748 kes Implement Include/Exclude file lists in FD as dlists using
1749 the new dlistString class. This permits efficiently having
1750 large include/exclude lists and completes project Item 25.
1751 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1752 console is authorized to cancel the job. This fixes bug
1754 kes Modify SD so that the VolCatJobs medium record is updated
1755 at the beginning of a Job rather than the end. This
1756 fixes bug #775 where exceeding MaxVolJobs caused jobs
1758 kes Added a mutex around getting and setting Volume information
1759 so that multiple simultaneous jobs will single thread.
1761 Switch to using Subversion
1762 kes Remove src/pygtk-console/ from configure
1764 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1765 plus the entrypoints.
1766 kes Apply patch supplied that corrects debug print
1767 in canceling jobs for max run time. Supplied as
1768 part of bug #621, which was previously fixed.
1770 kes Test on job_canceled() and sd_msg_thread_done inside
1771 loop starting the message thread to avoid a race condition.
1773 kes Remove rl_catch_signal from console.c as it conflicted
1774 with the header definition. Fixes bug #765.
1775 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1777 kes Clarify some stored/acquire messages to indicate if the
1778 problem is with read or append.
1780 kes Fix memory leak with storage ids in cats/sql_get.c
1781 kes Terminate watchdog earlier to avoid reference to released
1782 memory -- reported by Jason Austin.
1783 kes Move closing the database from jobq.c to the director daemon
1784 termination routine. This fixes memory leaks for shadow jobs
1785 (i.e. migration jobs).
1786 kes Free up the unique jobid chain items in migrate.c. This fixes
1787 a memory leak problem.
1788 kes Convert some ugly looking for statements to use foreach_alist
1789 in findlib/find.c. This will facilitate converting the structures
1790 to use dlist (for large include/exclude lists).
1791 kes Fix a bug in the btree.c and btree.h routines, then rename them
1792 rblist and add them to be built in src/lib. Include some new
1793 methods written by Rudolf Cejka that make the code more readable
1794 (hides some of the ugly casting).
1795 kes Add set_next() and set_prev() methods which make the code much more
1796 readable. Also add a new dlistString class that facilitates storing
1797 strings in dlists. To be used in the large include/exclude lists.
1798 kes Make some trivial modifications to lib/tree.h that use rblist
1799 rather than dlist for storing the tree links. This was suggested
1800 by Rudolf Cejka. The result of this is that the restore tree now
1801 uses red-black binary trees rather than simple linked lists. This
1802 should give rather dramatic speed improvements for directories
1803 contining large numbers of directories/files (more than 10000).
1805 kes Fix maxruntime bug #621.
1807 ebl Implement the include JobID in spool file name project.
1808 kes Reorder projects file in order determined by Jan 2007 vote.
1809 kes Implement item #12 on project list -- quick release of FD by
1811 kes Fix open of SQLite3 db where user does not have write permission
1812 so that DIR does not crash. Fixes bug #761.
1814 kes Add back missing @ in Win32 Makefile.
1815 kes Change 'Device not configured to autolabel' from INFO
1817 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1818 which should restart an indefinite # of times.
1819 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1820 other DIR specifications.
1822 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1823 Fix path quoting in SQLite scripts.
1824 Fix problems with SHGetFolderPath.
1826 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1828 kes Fix Job restart on error bug that promotes an Inc to a Full
1829 backup. This should fix bug #755.
1830 kes Add qt-console and first cut of code.
1834 kes Fix Bacula->Documentation link on Win32 to point to index.html
1835 instead of bacula.html. Fixed bug #750.
1836 kes Return JobId in db_get_job_record() when JobId==0. This should
1838 kes Do not release source pointers when restarting a failed job.
1840 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1841 This *should* fix bug #747.
1842 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1845 kes Modify USTORE constructor to set an empty store_source string,
1846 and don't copy the store_source string in a cancel. Hopefully
1847 this will fix Arno's seg fault, bug #744.
1848 kes Add back code to disable conio in configure. Fixes bug #743.
1849 kes Correct the Options scanner in the FD to correctly handle
1850 SHA1 option, which was eating the next option. Reported by
1852 kes Add code to indicate when the SD is spooling, spool wait, and
1853 despooling as requested by Alan Brown.
1855 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob