1 Technical notes on version 2.3
5 kes Apply patch from Martin to correct bug #1040, bscan sets existing
7 kes Fixed important spelling error in doc -- bug #1045.
9 ebl Fix bextract to be able to extract non-portable Win32 data to
11 kes Move initialization of read/write res lock earlier in the code.
12 This fixes the crash with a null conf file. This fixes bug
14 kes Redefine CURES in lib/parse_conf to be URES and move it all
15 into lib/parse_conf.c -- this responds to bug #1042, but does
16 not fix it. The fix is not to compile with FORTIFY_SOURCE.
17 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
18 the trunk SVN. I don't think this was reported as a bug.
20 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
22 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
24 kes Add DataDespooling and DataCommitting status (committing is
26 kes Finish implementation of new reservations code noted below.
28 kes Fix bsnprintf for float point numbers. I broke recently when
29 parameterizing some variables. This fixes bug #1036.
30 kes Undo recent reservations changes ... will apply them later
31 when they work better.
33 ebl Fixes #1034 which cause mysql to hang the connection after 8h
34 ebl Change default statistics target of filename.name and path.path
35 fields for PostgreSQL. This speeds lookup by indexes. Thanks
37 kes A few more tweaks to new reservation code. Make sure to clear
38 vol released flag when retaking volume. When reading label and
39 label is bad mark volume unused. When recycling, mark volume
40 unused so it can be renamed.
42 kes Fix reserve_volume() so it doesn't release a volume in use
43 (i.e. a volume entry not marked released). This should be
44 the last part needed to fix bug #1018.
46 kes Move Heartbeat documentation from Job to Director resource.
49 kes Fix existing switch drive SD code to call autochanger to release
50 any old volume. This must be done to keep the autochanger from
51 releasing subsequently newly reserved volumes in doing a close().
52 This should fix bug #1018.
53 kes Fail if attempting to get console input in batch mode. This
54 should help fail RunScript console commands that are incomplete.
55 kes First cut implementing switch_drive() in SD (not actually called).
57 kes Implement first cut running console commands in a RunScript.
59 ebl Fixes bug #1028 where "Selection Type" option was not usable
61 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
66 kes Add new free_tls() entry point so that Win32 builds.
67 kes Fix compile warning in src/lib/util.c
68 kes Fix entry point for edit_job_codes() so that Win32 builds.
69 kes Fix seg fault Frank Sweetser reports in regression testing
70 on his systems. The problem was that the original author of
71 bsnprintf.c did not take into account the side effects of
72 using ++x in the argument to a #define.
73 kes Make SD protocol backward compatible with version 2.2.x.
75 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
76 because Bacula no longer restores sockets.
77 ebl Always use ignorecase fileset option on win32 FD.
79 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
80 that implements double quoting include names in conf files,
81 and also allows piping input by having the first character
82 be a vertical bar (|).
83 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
84 that implement %f in RunScripts to pass the FileSet name.
85 kes Skip leading | when lex input comes from a pipe as suggested
86 by Michael Stapelberg <michael@stapelberg.de>.
88 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
89 Nerijus Baliunas <nerijus@users.sourceforge.net>
91 kes Implement Plugin Directory and plugin events.
93 kes Implement a security enhancement: TLS authentication but no
94 encryption. Enabled by setting 'TLS Authentication = yes'.
95 Note when this is on, TLS encryption is turned OFF!
97 kes This patch corrects a problem where the maximum concurrent storage
98 jobs counter gets out of sync during restore jobs causing jobs to
99 'wait on max Storage jobs'. This patch fixes bug #1009.
101 kes This patch fixes bcopy so that it produces correct Volumes.
103 kes This patch eliminates spurious output to the console during a VerifyVolume
104 job that contains encrypted data. It fixes bug #1024.
106 kes This patch prevents the 'status dir' command from trying to use a scratch
107 volume and possibly moving it from one pool to another. This patch fixes
110 kes Add new include to postgresql.c suggested by Marc Cousins so
111 that it compiles correctly with pgre version 8.3.
113 kes Fix --archivedir addition to configure. Replace it with
114 --with-archivedir in configure.in This fixes the regression
116 kes This patch fixes bug #1012 where the job is canceled because
117 of Max Run Time exceeded when the job has not yet started.
119 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
120 one 'part' to write. Instead of each part being stored on disk,
121 written to DVD, then deleted from disk, all parts are written to disk,
122 and only the last is written and deleted from disk.
123 kes This patch fixes the status command to include the formating string for
124 JS_AttrInsterting. It fixes bug #1021.
125 kes This patch should fix the Mac OS X build problem on the latest
126 Darwin, where sys/types.h was not included correctly (apparently
127 due to a change in the Mac headers). The solution was to explicitly
128 ensure that it is defined for the ./configure.
129 This patch also has a rebuild of configure that includes the Debian
130 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
131 kes This patch should ensure that queued messages to the console are
132 displayed as soon as possible. It should fix bug 1007, but has been
133 reported not to work.
135 kes This patch fixes the infinite loop when trying to increase the
136 maximum number of volumes in a Pool during the add command.
137 This patch fixes bug #1008.
139 Release Version 2.2.6
141 db Remove extra data on estimate command in joblist for bat.
143 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
144 really change anything, but is the beginning of doing it *right*.
145 To do it completely right the LastWritten date must be passed to
146 the SD, but it is not yet done.
147 kes Minor tweaks to some bat restore SQL.
148 kes This patch fixes bug #1003 where putting the message output from
149 a Verify job into the catalog results in a recursive loop. The problem
150 seems to show up only with postgresql (to be verified).
151 kes Correct %x to %p in postgresql debug statement.
153 kes Fix bug #942 where lots of emails where generated when the heartbeat
154 interval was low and Bacula wanted a different tape from the one in
157 ebl Add new SD despooling attributes and Dir inserting attributes
158 job status codes in the catalog (Status table).
160 ebl Use qmake-qt4 instead of qmake when available (debian system).
162 kes Add a security warning to src/cats/make_catalog_backup.in indicating
163 that passing the password via the command line (arg 3) is insecure.
164 This responds to bug #990 (it doesn't fix it).
166 kes Set default debug_level to zero. This corrects bugs #991 and #993.
167 kes Fix a crash in bat when it cannot connect to the Director for example
168 if the Director is not running.
169 kes Remove redundant INDEX (JobId) from File table in the trunk.
171 kes Make explicit exception to GPL in LICENSE to permit linking
172 the Win32 FD with Microsoft VSS code.
173 kes Apply the Solaris package patch from
174 Masopust, Christian <christian.masopust@siemens.com>
175 kes Apply the patch to optionally add a timestamp in the debug output
176 submitted by Mariusz Czulada <manieq@wp.eu>.
178 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
179 backend (sql_strerror). Fixes bug #989
181 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
182 It applied with no problems.
183 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
185 kes Redirect stderror to stdin on mt status command in mtx-changer.in
186 since the status is returned on stderr on Solaris.
187 kes Activate Close button on tray-monitor window. This fixes
189 kes Check for NULL item in parse_conf.c before calling it. In the
190 case of Device, there is no item and this caused a seg fault when
191 Device appears in the conf file.
192 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
193 avoids pulling in config.h multiple times in some new code.
195 kes Fix spurious warning message printed when creating a volume with
196 a LabelFormat. This fixes bug #976.
198 Release Version 2.2.5
200 kes Add JobId in place of Job name in all the Jmsg() output.
201 kes Correct the APP_DESC for the Win32 storage service (remove an e).
203 kes Make maxvol-test and new more strict maxvol2-test work.
204 kes Print JobId in all Jmsg() job output.
206 kes Add new SD despooling attributes and Dir inserting attributes
207 job status codes. This fixes bug 961.
208 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
210 kes Fix doc issue. This fixes bug #963.
211 kes Fix listing performance problems in bat. Pointed out by
213 kes Remove old debug code.
214 kes Fix bat code that tests for Win32. This should fix bug #968
215 kes Query 5 list wrong Vol after migration. This fixes bug #960
217 ebl Fix #969 where user can't change Replace option in restore menu.
219 kes Save jcr in thread specific data (tsd) for each thread.
220 kes Make Dmsg() print JobId as -%u.
221 kes Make Jmsg, Emsg, and others automatically pickup the jobid
222 for the thread if it exists.
223 kes Remove old reservation debug jid code.
224 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
225 ebl Add an option that permit to specify spool size in job
226 definition. (Applying patches/testing/spoolsize_per_job.patch).
227 You must upgrade SD and DIR at the same time.
228 dvl Add new configuration item --archivedir
229 dvl Adjust regression tests to use tmp not /tmp. This will allow
230 multiple concurrent runs of the regression tests.
232 kes Fix race condition that drops final block written to volume.
233 This happens in rare cases with multiple simultaneous jobs
234 when the Volume fills. This fixes bug #964. May be related
235 to bug #935 and possibly #903.
236 kes Eliminate more strerror() and replace with bstrerror().
237 kes Remove BSD getopt and replace with unrestricted IBM version.
238 kes Fix Win32 build for changed calling sequences.
239 kes More tweaks to the mount volume routines to get everything
240 right. Changed variable name from find to have_vol, which is
241 much easier to understand.
242 kes Enhance btimer debug code.
244 kes Fix FD->SD authorization failure, which was due to spurious
245 wakeups from a pthread_cond_timedwait(). Simply check the
246 predicate before continuing. This fixes bug #953.
247 kes Add const char where needed (more to do). Remove temp debug code.
249 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
250 kes Don't overwrite error message in check_tables_version.
252 kes Unlock batch insert tables with same calls used elsewhere.
253 kes Allow starting 59 jobs a second.
254 kes Make SD session key more random.
255 kes Add retry for SQLite opening db if it fails. Probably helps
257 kes Suppress extra error messages during batch insert failure.
259 kes Add jcr to timer packets so if killed message can be sent to job.
260 kes Add JobId to all Dmsg() output.
261 kes Put some FD auth code on dbglvl rather than fixed.
262 kes Return insert attributes error message in db msg buffer to avoid
263 false error messages. Helps fix bug #966.
264 kes Separate batch init error messages. Probably helps fix bug #966.
265 kes Make SD code that contructs attribute insert check string lengths
267 kes If Dir gets an error during inserting attributes, cancel SD.
268 This reduces unnecessary error messages.
270 kes Correct search boolean for getting Volume info
271 ebl Cleanup batch insert code. Probably fixes bug #965.
272 kes Back out one small change to the reservation system (reserving a volume).
273 kes Rework how a Volume is mounted. It is now much more intelligent and
274 will always attempt to use any mounted volume if possible and reduces
275 calls to the Director asking about volumes.
277 kes Turn off some code when batch insert not enabled.
278 kes Edit FD name in connect error messages.
279 kes Rework the reservation system to take into account that the Director
280 might give us a Volume that is different from the current one being
281 used, and to ensure that we don't exceed Maximum Volume Jobs.
282 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
283 fatal error with multiple jobs running'
284 kes Add more debug code in reservation system.
285 kes Implement maxvol-test to check bug #947.
287 kes Add code to handle tray monitor separated from Win32 FD.
288 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
290 kes Add missed return in fixing verify bug -- trunk only.
291 ebl Fix a command parser issue causing a director segfault.
292 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
294 kes Increase the max block size to 4MB fixes bug #957.
295 kes ERABT if user sets min block size > max block size. Fixes bug #956.
296 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
297 is not properly mounted (recognized) during a poll.
298 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
299 Job that has differences reports Verify OK.
300 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
302 ebl Add an option to operate on all pools with update vol parameters.
303 This complete the project 20. Patch from Nigel Stepp.
304 ebl Add history support to bconsole when using readline.
305 Using Ctrl-D to exit doesn't update .bconsole_history
306 kes Modify new volume algorithm to use max MediaId for generating next
307 volume number rather than the count of Volumes. This should essentially
308 eliminate the failure rate if some volumes were deleted. Bug #921.
309 kes Begin implemention of Optimize Job Scheduling.
310 kes Implement restore callback that Dirk and I agreed on for bat
311 restore. This fixes bug #928. Restore of backup of zero files fails.
312 kes Fix SQL Catalog logging which broke with new db_escape_string
315 Release Version 2.2.4
317 kes Fix bacula_cats.def for new db_escape_string().
318 kes Increase size of name string when FD making connection to SD.
319 May fix bug #953. FD->SD connection failure.
321 kes Add code to help Dan debug 2drive-incremental-2disk test.
322 kes Add code to try to fix bug #908.
323 kes Add waits to multiple exit detection code to try to force pid
324 file to always be deleted.
325 kes Restore good dev.tar.gz to rescue set appropriate binary property.
327 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
328 trying to switch drives by checking for blocking before unblocking.
330 kes Cancel storage daemon in all cases where FD reports error. This
331 should fix virtually all cases of bug #920.
332 kes Fix db_escape_string() for MySQL which did not compile.
334 kes Fix error message that was clobbered when Dir tells SD it does not
335 have write permission on Volume. This should fix a minor point
336 in bug #942, but not the main problem.
337 kes Add code to cancel job in SD if FD connection fails. This should
339 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
340 dvl Pass jcr and db into db_escape_string() to enable better escaping
342 kes Fix migration code to get correct Volume name with multiple volumes
343 by skipping |. Fixes bug #936.
344 kes Implement patch supplied by Landon to fix bug #944 where using
345 TLS with bconsole uses 99+% of the CPU.
346 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
348 kes Move patches into patches directory.
350 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
353 ebl Using 'm' in bconsole will show messages like before,
354 and not memory usage.
355 kes Fix bug #935, and probably also bug #903 where files were not
356 restored. MediaId was not properly set in JobMedia record after
359 kes Suppress chown and chmod error messages if the FD is not running
362 kes Apply Martin Simmons' patch that should turn off the new API usage
363 when batch insert is turned off allowing building on older
365 kes Add ./configure search in qwt-qt4 for qwt package
367 kes Bacula is now free of 3rd party GPL copyrighted code!
369 kes Add guid_to_name.c/h which replace idcache.
370 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
372 ebl Detect if new PosgreSQL batch insert API is present.
373 kes Correct incorrect mempool call causing Director crash. Occurs on
374 systems without va_copy().
375 sb Update spec files for 2.2.1 release
377 kes Fix memory pool call in ua_output.c. bug #934.
378 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
379 Add test program to fnmatch.c
381 kes Integrate patch to README.vc8 from
382 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
383 edit it to get it into Unix patch format.
384 kes Implement mkpath.c to replace old FSF makepath.c
386 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
388 Release Version 2.2.1
390 kes Update POTFILES.in
391 kes Cleanup a few underquoted AC_DEFUNs in configure
392 kes Apply patch from Martin Simmons that adds a test for va_copy to
395 kes Fix bug #921 by increasing the number of tries to create a new volume
397 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
398 can be called multiple times. Implement a version for machines
399 without va_copy() that gets a big buffer.
401 kes Integrate more portable zone offset code into bsmtp.c
402 Submitted by Attila Fülöp.
404 kes Fix bad SD->FD return status reported by
405 (James Harper) <james.harper@bendigoit.com.au>
406 ebl Fix a bug in read_close_session which return random status
407 thanks to James Harper
409 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
410 and directory names during restore of single file/directories.
411 kes Add sanity checks to .sql command when string is empty. Hopefully
412 that will resolve Dirks Director crash.
414 kes Apply patch submitted by Martin Simmons that corrects a seg fault
415 in the bsmtp chat subroutine when debug is >= 10.
417 kes Fix Director crash when running bat SQL queries.
418 kes Add David's notes on Item 8: Copy pools.
420 kes Rework projects file to be current and ready for a vote.
421 kes Enhance lex scanner error message.
423 kes Tweak LICENSE file to mention BSD code.
424 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
425 if specified on the ./configure.
426 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
427 This class is intended to allow us to open a second bsock to the
428 Director while in the restore subdialog.
430 kes Fix configure to create bat Makefile before creating dependencies.
431 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
432 kes Add a tooltip to the tray monitor.
433 dvl Set the Director's PID file before dropping privs. This fixes
436 kes Update AUTHORs file
437 kes Increase the default max concurrent jobs to 20 in FD and SD to
438 correspond with the default .conf files.
439 kes Rewrite the Win32 service routines. This eliminates the 3 copies
440 some different, of the same file created by RN when porting the
442 kes Rearrange some of the Win32 directories and the placement of the files
444 kes Set DEVELOPER flag in version.h
446 ========================================================================
447 Release Version 2.2.0
449 kes Apply a second doc patch from Marc.
450 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
451 improves the tips section that discusses how to setup multiple
454 kes Update bat README file.
455 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
456 corrects a typo in the Recycle status check in db_find_next_volume().
457 This will probably fix a number of annoying problems with multiple
459 kes Modify most of dird/msgchan.c to use bsock class calls rather than
460 bnet calls -- no functionality change.
462 kes Modify the Verify output to specify if files are missing on
463 the Volume(s) or disk. Fixes confusion in bug #916.
464 kes When more than one Volume is read in a migration job, the last
465 Volume bytes reported are from the last read volume rather than
466 the last written volume. Fixed. This fixes bug #910.
467 kes Fix display of Recycle flag after update volume=foo recycle=yes.
468 It previously printed New Recyle flag is: no. This fixes bug
471 kes Correct seg fault when switching tape drives during restore.
472 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
473 be used until after 2.2.0 release.
475 kes Remove fnmatch() in SD that permitted wild card specifications.
478 kes Fix %g in filename returned by SQL for browse tree reported by
480 kes Fix configure so that it puts config.out in the cwd rather than
482 kes Attempt to fix the locking problem reported by Eric in bug #906.
483 kes Make berrno class to leave errno unchanged after constructor call.
484 kes Make bnet_server use the heap rather than the stack to allocate
485 its socket fd pointers to avoid a crash at termination. Problem
486 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
488 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
489 and putting it in depkgs-qt along with Qt4.3.
491 kes Rework code in acquire.c that switches drives for reading when
492 the Media Type does not match. This should fix bug #906
494 ebl Fix a director segfault during job setup #907
495 kes Correct seg fault in postgresql when first operation returns no
496 rows. Fixes Dirks File browser problem seg fault with bat.
498 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
499 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
502 kes Implement PopUp YES/NO dialog for bat.
504 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
506 kes Correct RunScript to terminate job in FD on failure.
507 kes Change abort_on_error and AbortJobOnError to fail_on_error
508 and FailJobOnError in RunScripts.
509 kes Minor tweaks of code formating in RunScripts, principally to
510 avoid depassing 80 columns.
512 kes Eliminate one #ifdef Win32 in bsmtp
513 kes Implement grow tool to grow a file for testing very large databases.
514 kes Add big-vol-test to test Bacula seeking with > 5GB.
517 kes Modify find_next_volume() to return all values in Media record.
518 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
522 kes Update Release notes
524 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
525 Warning, in previous beta version, all media get from scratch keep their
528 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
529 This should fix bug #842. Made a note to look at removing the temp
530 files at the end of the install.
531 kes Add ability to mount and unmount a file device providing it is
532 marked as being removable and has the appropriate mount and unmount
533 commands defined in the Device resource. This fixes bug #830.
534 kes When applying a storage override, release all previous storage
535 definitions rather than just prepending the new storage.
536 This should prevent a good deal of confusion.
538 kes Implement ./configure search for qwt libraries.
540 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
541 Win32 FD. This should fix bug #893.
542 kes Remove an unnecessary beep in Win32 init code.
543 kes Update copyright dates in Win32 executable about boxes.
544 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
545 code with a BSD getopt.c and getopt.h.
546 kes Remove sched.h from the Win32 compat directory -- not used.
547 kes Remove the Exit menu item from the Win32 tray monitor. If you really
548 need to shut it down, do it through the services panel or the command
550 kes Remove some inappropriate Bacula FSFE copyrights.
551 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
552 kes Fix regress config non-portable test as pointed out by
553 Florian Heigl <florian.heigl@gmail.com>
554 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
555 as pointed out by Florian Heigl <florian.heigl@gmail.com>
557 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
558 Reported by Frank Sweetser.
562 kes Fix client-only build.
563 kes Integrate client-only fixes for bsys (initgroups) and conio from
564 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
565 kes Make arguments to get_scratch_volume() in same order as other
567 kes Rework the prune_volumes() subroutine so that after purging and
568 no volume found in desired pool, it will check for a scratch
569 volume. This prevents recycling the whole scratch pool.
570 kes Add code to status storage to print boffset_t (largefile support).
572 kes Move qwt (Graphics libarary for Qt4) to depkgs.
573 kes You now need a --with-qwt=<dir> to be able to build bat.
574 kes Update src/win32/cats/bacula_cats.def to include the new
575 db_get_query_dbids() call on Win32.
577 kes Correct a problem when selecting a scratch volume and moving
578 it to another pool that lost some columns.
579 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
580 kes Enhance Autochanger error messages to include Volume and device name.
581 kes Rework prune_volumes() code to take account of InChanger flag,
582 and to handle recycling volumes going to the Scratch pool and
583 current pool because the RecyclePool directive.
584 kes Implement a better and more efficient db_get_query_dbids() to
585 handle creating and passing back a list of DBIds.
589 kes Start work on new more efficient DBId subroutine. First use
590 will be for recycling volume to Scratch inchanger.
591 kes Increase number of JobIds in pruning from 1000 to 10000.
592 This to be replaced by above routine.
593 kes Begin implementation of building Qt4 on Win32.
594 kes Correct typo in fix I added for bad TLS shutdown.
595 kes Pull 2.0.3 patches into patches directory.
596 kes Update Release notes. Include qt-console in line count.
597 kes Update Projects file.
599 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
600 bug in migration code where a job that spanned two volumes
603 kes Implement new BST_DESPOOLING blocked state. Change from locking
604 during despooling in SD to blocking. This means that other threads
605 can work with the device structure, in particular the reservations
606 system while despooling.
608 kes Fix return in reservation message queue that missed clearing
609 the jcr lock (implemented 26Jun07 below).
610 kes Rename a number of dev methods to make locking function names
612 kes Document locking in lock.c. Move lock structures to new file
615 kes Move reservations message lock to lock jcr only this
617 kes Move main SD locking code into lock.c (new file).
618 kes Update Win32 build to include lock.c
622 kes Dirk committed the qwt library code for drawing graphs in bat.
623 kes Tweak install of qwt so that it is integrated with ./configure.
625 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
626 out by Eric (my typo).
627 ebl Fix configure.in to get batch mode enable
628 kes Return correct string from authenticate.cpp in bat when connecting
630 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
631 spurious line drops when using TLS.
632 kes Do not file reparse points when restoring a file that already
635 kes Implement Windows reparse points -- similar to directories, but
636 we do not descend into it. This is a first cut. They seem to
637 be backed up, but restore is not yet tested.
638 kes Remove restore_blocking in tls code when shutting a socket to leave
639 it in blocking mode. Hopefully this will fix the encryption bug
640 reported by Frank Sweetser.
641 kes When opening a file for backup, tell the OS that we are going to
642 read it sequentially -- optimization.
643 kes Change variable names in authenticate_director() to not conflict
644 with member names in bat. Caused great confusion with compiler,
647 kes Queue openssl error messages in case of comm problem.
648 kes Do shutdown() call if socket terminated.
649 kes Remove some duplicated code in tls.c
650 kes Move more of the bsock member variables into private and access
652 kes Add Frank Sweetser's tls-test to the regression suite.
654 kes Add Swedish sv.po file
656 kes Don't print clock skew message in FD if less than 3 seconds diff.
657 kes Add a bit of VSS info to status client.
658 kes Implement a first cut of Vista VSS, using Win2003 code.
662 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
663 loaded tape but uses first drive).
664 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
665 This was indeed a Win32 issue.
667 kes Simplify search of autochanger for in-use Volume.
668 kes Fix exit condition of check for in-use volume. kes Remove
669 inappropriate my_postgresql_free_result() in db_close()
671 kes Fix bad return in FD when encryption signature not found.
672 Probably caused a crash.
673 kes Inhibit missing encryption signature error messages for
674 file types where no signature computed.
675 kes Correct inverted check on autochanger in reservation system.
676 kes Tweak debug code in autochanger reservation.
678 kes Add some additional locking in the cats directory in subroutines
679 that modify packet variables called from batch insert.
680 kes Rework how dcrs are allocated. new_dcr() can now be called
681 with an existing pointer, and it will simply clean it up.
682 This allows the reservation system to test various different
683 devices, and will permit easy device changes.
684 kes A bunch of changes all over to handle new new_dcr() calling
686 kes Work more on the Volume management in the SD. Remember Volumes
687 for tape drives and for autochangers (even virtual disk changers).
688 kes When looking at the Volume list to reserve a drive, handle
689 autochanger names correctly by interating through the changer
690 devices. Also call the Director to see if a Volume is suitable
692 kes Fix some bugs in bscan. Make sure all media records are written.
693 Make sure that valid JobMedia records are written for disk files.
694 Previously they were completely wrong.
695 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
696 that the URLs don't change and so that the developers will all
697 work off the same copy. Rebuild from scrach.
698 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
702 kes Fix seg fault in FD from incorrect digest size.
703 kes Fix argument to non-OpenSSL crypto.c subroutine.
707 kes Remove a few malloc()s from the encryption code.
708 kes Use the class calls to bsock in filed/backup.c and restore.c in
709 place of the old bnet_xxx code.
710 kes Implement code that does an on the fly calculation of the
711 signing digest during restore of encrypted files. It makes
712 a best guess at the algorithm, and if it is not correct, will
713 then revert to the old code which reads the file after it is
715 kes Implement at least one missing crypto stream in stream_to_ascii()
716 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
717 #877 where a reload with bad syntax causes Dir to exit.
719 Cut: 2.1.14 beta (not released)
721 kes Do not free a volume on a tape drive until another volume is
722 mounted and read, or the autochanger unloads the volume.
723 This should help the SD re-use volumes that are already mounted,
724 and should fix bug #886.
725 kes Apply patch from user brettedgar that allows gnome2-console include
726 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
727 kes Apply patch from Lucien Weller that fixes day of week calculation
728 because of DST flag problem. Fixes bug #887.
730 kes Move find_next_appendable_volume() to after acquiring a valid device
731 in reserve.c. This fixes bug #864 -- confirmed by reporter.
733 kes Unable to reproduce bug 872. However added additional testing for
735 kes Bug #874 resolved by documenting SQLite limitations.
736 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
737 kes Bug #881 resolved by removing typo in mtx-changer script.
738 kes Made Frank Sweetser's wiki the official Bacula wiki with his
739 approval. Added a link to the wiki on the web page, and implemented
740 a backup from http://paramount.ind.wpi.edu
742 kes Fix update allfrompool to pass pool name.
744 kes Convert to pure GPL v2 license.
745 kes Fix sscanf problems reported by Peter Buschman that caused
746 a bus error on Solaris.
747 kes Rework (simplify) the select prompt in bat.
748 kes Move get_jobid_from_tid() into lib and create a
750 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
751 should definitely fix the problem of lost error messages in the
753 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
754 kes Eliminate tcpd.h from the project. Enclose the #include from the
755 library with extern C ...
756 kes Add print of signal name when a signal is trapped.
760 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
762 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
763 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
764 makes SQLit3 run 30 times faster, though a bit less safe.
765 kes Implement --with-batch-insert in configure and detection of thread
766 safe libraries. It is on by default, but turned off if no thread
767 safe library (e.g. SQLite 2) is available.
769 kes Fix Bacula PostgreSQL buffer overruns.
770 kes Do better checking for NULL results returned from PostgreSQL;
771 implement retry for failed queries; clear results buffer after
772 failed query. Hopefully this will correct the PostgreSQL failures.
774 kes Implement algorithm to handle only one appendable volume with
775 Prefer Mounted Volumes = no.
776 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
777 returned from a query.
778 kes Make volume lock recursive.
779 kes Implement an additional volume reservation algorithm that
780 starts by considering all reserved volumes then uses the
781 old brute force algorithm of searching the resources to
782 find a suitable device.
783 kes Add new reservations debug code and refine the old code.
784 kes Update the win32/dll/bacula.defs file.
786 kes Tweak reservations algorithm to permit a few more cases, i.e.
787 volume reserved, but on different drive, ...
788 kes Enhance SD status to include Pool and Media Type for drive in a
789 more readable format (a bit longer).
790 kes Fix PostgreSQL double free.
792 kes Minor refactoring of restore decryption code.
793 kes Add code to smartall.c to detect double free of a buffer.
795 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
796 so that bsmtp will create a correct email address (mailbox only).
797 kes Modify 'memory' command so that the buffers are listed as 'In use'
798 to avoid confusion with Orphaned buffers.
799 kes I reworked the OpenSSL include/lib flags to be handled in
800 the standard Bacula way, which should fix bug #863 concerning
801 non-standard OpenSSL libraries.
803 kes Implement Help Browser window for bat.
804 kes Fix reload bug that reset StorageId to zero.
806 kes Fix TLS #ifdefing when TLS turned off.
807 kes Ensure that when labelling a tape with Slot=0 that InChanger
809 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
811 kes Add StartTime to final uar_sel_jobid_temp query so that we can
812 add DISTINCT (required by PostgreSQL).
813 kes Implement BSOCK authenticate_director() method. Eventually will
814 authenicate all daemons.
815 kes Move several more functions into the BSOCK class.
817 kes Add code to tell the OS that we no longer need a cached
818 file that we were reading. In findlib/bfile.c. Also,
819 only cache files that we are reading. Thanks to
820 Tobias Oetiker <tobi@oetiker.ch> for the idea.
821 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
822 kes Implement script to automatically generate cats and dll .def
824 kes Update README.mingw32 to include new .def file generation.
825 kes Correct typo in UTF-8 error message as reported by:
826 jhernandez <julianhernandez@gmail.com>
827 kes Add additional sm_check() code on debug level 1.
828 kes Set default debug level to 1.
829 kes Trap SIGABRT in attempt to get traceback.
831 kes Reduce bat connect timeout from 30 to 15 seconds.
832 kes More restructuring and implementing BSOCK class in place of
834 kes Remove a few unnecessary malloc() tests in crypto code.
835 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
836 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
837 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
839 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
841 kes Fix Verify InitCatalog. The attributes were not pointing to the
842 correct saved location.
843 kes Implement message callback so that GUI is sure to get all
844 daemon messages. Currently displayed in a dialog in bat.
845 kes Ignore SIGUSR2 (Bacula timer) in bat.
846 kes Apply regress patch from bug #859 to allow regress to work
847 with Solaris compiler.
849 kes Begin adding TLS support to bat.
850 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
851 clean up lex.c and make it more readable.
853 kes Move more bnet functions into the BSOCK class.
854 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
855 kes Complete change of berrno strerror() method to bstrerror()
859 kes Cleanup incorrect email addresses in bsmtp.
860 kes Make bat display initial messages rather than discard them.
862 kes First cut of adding .mod to the run command.
863 kes Implement auto display of messages in bat.
864 kes Enhanced preferences to allow all Bacula output to be
867 kes Try to make bsmtp date routines more generic.
868 kes Fixed bug #856 autochanger documentation.
869 kes Rework bsmtp date editing for Win32. This fixes bug #854.
870 kes Add new cats entry point so Win32 builds.
872 kes Attempt to fix bsmtp date editing on OSes without %z editing.
874 kes Do better checking for the MySQL 64 bit libraries looking for both
875 .a and .so libraries.
876 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
877 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
878 kes Require the thread safe version of MySQL during configure. Thanks
879 to Andre Noll for pointing this out.
880 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
881 continuing in migration code.
882 kes Apply implementation of tray-monitor font derived from gnome-console
883 submitted by Andreas Piesk <a.piesk@gmx.net>
885 kes Eliminate important memory loss in SQLite
886 kes Fixed the batch insert MySQL thread specific data that was not
887 being freed. See cats/mysql.c:db_thread_cleanup().
888 kes Fix restore before command.
889 kes Convert old hdr.name to name() in a few places.
890 kes Implement update jobid command.
891 kes Return all time_t dates in db_get_job_record()
892 kes Stop watchdog in SD earlier.
893 kes Put Pool just after Storage in please mount message.
894 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
897 kes Update the po files.
898 kes Fix Verify InitCatalog by making it cache attributes.
900 kes Change name bacula-bat to bat for man 1 page to correspond to
902 kes Check for client and store NULL pointers in status command. This
904 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
905 kes Fix sign extended editing of %p.
906 kes Clean out a little old #ifdefing in cats/mysql.c
908 kes If time diff between DIR and FD is more than 600 seconds convert
909 INFO message to WARNING.
910 kes Implement heap size display in status for all daemons.
911 kes Attempt to fix MySQL db open memory loss (not successfull).
912 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
913 kes Eliminate memory loss in MySQL (possibly other SQLs) during
914 Query. This looks like a MySQL but but by doing extra releases,
915 the memory goes away. This should fix bug #847.
917 kes When backup fails, cancel SD before waiting for sd termination.
918 kes If SD is waiting for FD to connect during cancel, wake up the
920 kes Fix fsf code so that errno is correctly reported.
921 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
923 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
924 so that Bacula doesn't later stumble into a seg fault.
925 kes Use the term Restore Client in the restore Job report.
926 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
927 the original job's FileSetId.
928 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
929 spooling in migration jobs. Not yet tested.
930 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
931 reading conf file from a pipe. However, do it with open_bpipe()
932 rather than popen. Not yet tested.
934 kes Fix an ugly bug where the VolCatBytes were getting updated
936 kes Implement bconsole memory command that prints current memory
937 usage, plus smartalloc dump.
938 kes Clarify some error messages in backup, admin, and migrate.
939 kes Shrink label dialog to smaller size.
940 kes Invert Cancel OK buttons on restore to be OK Cancel.
941 kes More strerror() to bstrerror() conversions.
943 kes Start implementing bstrerror() in place of strerror().
944 kes Stripping path -- seems to work.
946 kes Prevent door and port files from being restored (mostly
948 kes Free an unreleased buffer in compat code.
949 kes Change console Job name from *Console* to -Console- to eliminate
950 Win32 filename problems. Put Win32 path separator when creating
951 Console file. This fixes bug #846.
952 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
954 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
956 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
957 to force Win32 error message.
959 kes First cut strip path. The data should be passed to the FD,
960 but nothing is done with it yet.
961 kes Enhance the digest and signature routines in the crypto
962 library to accept a JCR and to use it to print error messages
963 so that they will go in the Job report rather than the daemon's
965 kes Simplify some of the verify signature code.
966 kes Simplify a few of the alternative returns in the signature
969 ebl Use only POSIX regex instead of GNU regex in breg.c for
970 File relocation. It fix broken freebsd compilation.
971 kes Convert all other Dir files to use new ua class message
973 kes Tentative fix for missing digest signature in bug 807.
974 kes Correct handle problem in new win32_ftruncate routine.
975 kes Convert ua_purge.c and ua_update.c to use new ua class
976 message routines for bat.
978 kes Correct incorrect installation of LICENSE in Win32 installer.
979 kes Display LICENSE at the beginning of the Win32 install.
980 kes Attempt to correct the need for the png files to be installed
982 kes Reapply my bat.conf install script in qt-console. I think I
983 editted bat.pro instead of bat.pro.in and it was lost.
984 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
985 the /var/lock/subsys for subsysdir. Also corrects typos in the
988 kes First cut update job.
989 kes Correct configure to include qmake of src/qt-console directory.
991 kes Make restore job yes/mod/no print in one command so GUI works.
992 kes First cut implementing backup and restore client.
993 kes Correct editing in Verify output that caused a seg fault.
995 kes Insure that bat.conf is not overwritten during installation.
996 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
997 while I was implementing migration in March 2006 !
999 ebl Cleanup file relocation, using char *RegexWhere instead of
1000 char *where + bool where_use_regexp
1001 kes Update some manpages and add bat manpage.
1002 kes Make a first cut at converting bacula.spec.in for bwx-console
1004 kes Apply patch from John Goerzen to add hostname as fourth argument
1005 to make_catalog_backup script.
1006 kes Fix typos I introduced into bsmtp.c
1007 kes Make pm_strxxx() routines handle input of NULL pointer. This
1008 is to protect from NULL pointers returned from SQL databases.
1009 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1010 kes Add more debug to FIFO code -- fix fifo regression test.
1012 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1013 kes Add thread timer to bnet_connect() to break from OS if wait time
1016 kes Update Win32 build to include new files, new symbols, and
1018 kes Implement socket level heartbeat (tcp_keepidle)
1019 ebl Commit File relocation patch
1020 kes Make bat have 'make install' target.
1021 kes Warn during install if old gnome-console binary found.
1022 kes Warn during install if old wx-console binary found.
1023 kes Add -8 option to bsmtp command line to add content type utf-8.
1024 Fixes bug #809. (Character coding problem in bsmtp).
1025 kes If < is found in target (from, to, cc) then do not enclose the
1026 target in < > in bsmtp. Fixes bug #772 (malformed address).
1027 kes When printing certain items in dbcheck, stop after 300000.
1028 Fixes bug #822. (dbcheck loops).
1029 kes Incorrect status in Dir after waiting for mount with poll set.
1032 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1034 kes Print waiting to reserve a device every 5 mins.
1036 kes Don't call close_part in label.c if tape and relabel.
1037 kes Don't free volume if busy in close() -- should help with
1039 ebl Fix #824 RunScript bug (After script could be execute twice)
1040 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1041 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1042 Add a regression script to test RunScript
1044 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1047 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1048 deprecated. No additional bugs will be fixed, and they will be dropped
1049 in a future release (probably 2.4.0).
1050 kes Change name of wx-console to bwx-console to make it more Bacula
1052 kes Change the name of gnome-console to bgnome-console to make it
1055 kes Some time in March, a Feature Request with patch from Jorj Bauer
1056 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1058 The ability for the director to validate a Client (FD) CN against
1059 an arbitrary set of patterns rather than the hostname, with
1060 A new 'TLS Allowed CN' set of directives which are implemented
1061 in the Client resource. Then pattern matching is used in place
1062 of hostname matching against the Certificate's CN. As an example, we
1063 have certificates which (a) use a local CA, and (b) have a CN of the
1065 kes Add new/changed entry points to Win32 build
1066 kes Create unaccepted-projects for projects that are not accepted.
1067 kes Simplify locking in the reservations system.
1068 kes Add more debug code in reservations.
1069 kes Make sure error condition on reserving a volume is handled correctly.
1070 kes Correct handling of volume_in_use.
1071 kes Correct handling of initializing a device.
1072 kes Move handling of broadcasting releasing a device into release_device().
1073 kes Correct attaching dcr to dev so that it is only done if device
1074 is properly initiated.
1076 kes Locking debug level tweaks in SD.
1077 kes Tweak new Volume code.
1079 kes Add exec external-command [wait-seconds] to bconsole. This
1080 executes the external-command. Note! normally external-command
1081 should be enclosed in double quotes.
1082 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1083 it should normally be off in a production system.
1085 kes Implement die command for SD so that we can force it to dump.
1086 kes Implement SD lock debug code.
1087 kes Implement new algorithm for keeping Volume list in SD. It
1088 is now owned by the device.
1090 kes Implement new code for freeing in use volumes that should
1091 resolve if not all, some of the problems of multiple drive
1092 tape conflicts described in bug 801.
1094 kes Fix gui/bacula-web/images files in svn.
1095 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1097 ebl Fix a bug in batch mode (in string escape)
1098 kes Correct migration prune SQL typo that crept in in a
1099 recent 2.1.x change.
1101 kes Move bnet_despool() into class in bsock.c
1102 kes Modify job report to include director name and Build OS.
1103 kes Move drop root privilege and check_catalog() before fork.
1104 kes Add update database scripts (version 9 to 10) to updatedb directory.
1106 ebl Check size and age of each file after its backup to see if
1107 it has changed during backup, if 'checkfilechanges' is set.
1108 The FD will do an extra check (stat(2)) after
1109 each file backup. mtime, ctime and size are compared with
1110 'before backup' information. If time or size mismatch, an
1111 error message will be generated. You must upgrade FD to use it.
1113 kes Make database name and user configurable
1114 --with-db-name=xxx --with-db-user=xxx
1115 kes Add back database type to message.c for debugging.
1117 kes Implement dir_sql() which issues an SQL query.
1118 kes Modify bat medialist to use dir_sql() and do some minor C++
1119 formatting as well as eliminating a number of pointers, simplifing
1122 kes Fix some of the mtx-changer grep commands for tape label readers.
1123 kes Convert a number of bsendmsg into the appropriate send/warning/error
1124 message class calls.
1125 kes Suppress the using database message in the .sql command.
1126 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1128 kes Add context menu for floating a window.
1129 kes Some minor cleanup and name changes in qt-console
1130 kes Add doing mt setblk 0 in Win32 mtx-changer.
1131 kes Apply Martin's bug fix to move definition of ENODATA for
1133 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1134 sqlite2 and sqlite3.
1136 kes More pruning cleanup.
1137 kes Turn on wait_for_drive by default in mtx-changer.
1138 kes Turn on Batch insert code by default as it now passes regression.
1139 kes Add ./configure --enable-bat to enable building of Bat.
1140 No install yet though.
1142 kes Implement a new .sql command for bat.
1143 kes Implement code to turn off pruning in obtaining the next volume.
1144 Pruning is turned off for the status dir command, but turned on
1145 for SD requests and for the list nextvolume command.
1147 kes Correct Qmsg() that was not updated correctly when committing a
1148 previous change (probably the recent TLS patch).
1150 kes Write new subroutine is_volume_purged() that explicitly checks
1151 if the Volume is purged, and if so marks it as such. This should
1152 resolve problems reported about needing to mount twice to recycle
1154 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1155 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1156 amount of duplicated code.
1157 kes Do volume pruning only for the Media Type desired (reduces pruning time
1158 if multiple Media Types are in the same pool).
1159 kes Implement more detailed info in the Job report for the Bacula version
1161 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1163 ebl Add bbatch tool to bench database and insert mode.
1164 Fix sql quote stuff in batch mode
1165 Fix sql stuff for mysql
1167 kes Correct problems with am/pm scheduling. Fixes bug #808.
1168 kes Implement new prunning code that prunes up to 1000 jobs at
1169 the same time. The same technique can be applied to a number
1170 of other prune/purge subroutines.
1171 kes Add an insanity check when starting a new tape job to ensure
1172 that the tape position has not been changed. If so fail the
1174 kes Fix Win32 build for dlls to add the folllowing:
1175 src/lib/bsock.c -- new file with new entry points
1176 src/lib/dlist.c -- new entry points
1177 src/cats/sql_create.c -- new entry point
1178 src/cats/sql_cmds.c -- new DATA item exported
1180 ebl batch mode cleanup bscan-test is ok now.
1181 kes Implement SD code to check length of disk volume before appending.
1183 kes Correct return status on db_batch... routines.
1184 kes Add call to db_write_batch_file_records() to migration code.
1185 ebl Fix AfterJob timing
1186 kes Move the checking of the database in initializion of the Director
1187 to after we drop privileges. This avoids the need for both root
1188 and bacula access to the DB.
1189 kes Correct a misplaced variable definition in src/filed/backup.c
1190 kes Correct how the new batch insert db_create_attributes_record()
1191 uses the arguments. Caused a seg fault in bscan.
1192 kes Implement lock() and unlock() methods in DEVICE class.
1193 Implement block() and set_block(xx) methods in DEVICE class.
1194 kes Modify bnet_connect() so that it uses time() to check for the
1195 wait time expiring (on some OSes, some system calls may not
1196 return immediately).
1197 kes Modify Verify to obtain the previous JobId when it is actually
1198 running rather than at schedule time (as it was in 1.38.x).
1199 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1201 kes When checking pid in pid file, continue running if the pid is
1202 the same as ours. This occurs on IRIX after a system crash.
1205 kes Extend new GUI API.
1206 kes Make the ua structure a class, and implement send_msg(),
1207 error_msg(), warning_msg(), and info_msg().
1209 kes Apply fix from for building wx-console on the Mac from
1211 kes Implement new select mechanism for GUI programs.
1212 kes Reorganize initialization of stackedWidgets in bat.
1214 kes Add updated nagios plugin supplied by Christian Masopust.
1216 kes More bat implementation.
1217 kes File migrate bug with Pool Occupancy using mediaid instead
1218 of jobids. Fixes bug #795.
1219 kes Fix orphaned buffers in filed backup and verify due to
1220 crypto buffers not freed during errors. Fixes bug #789.
1221 kes Extend new GUI api code to tree commands.
1222 kes Ensure that tree and dot commands check console ACLs.
1223 kes Permit marking directory with trailing slash.
1224 kes Allow 20 console connections (instead of only 10).
1226 kes Add smartctl call to bacula-sd.conf as an example of getting
1229 kes Modify jobq.c to let simultaneous restore jobs run. This may
1230 cause them to fail if they cannot get a drive.
1231 kes Add Client Connect Wait to Storage daemon to permit users to
1232 modify the time the SD waits for a FD connection.
1234 kes Correct virtual changer check which was backwards. This caused
1235 volumes to be unloaded into slots already occupied.
1237 kes Apply Command ACL filter to JobId list in restore command.
1238 kes Correct typeo in var.c patch.
1240 kes Don't let Bacula prune File or Job records for the current Job.
1241 kes Fix variable substitution pad + inc bug reported (with patch)
1244 kes Correct SQLite log table index as reported by Luca Berra.
1246 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1248 kes Begin implementing new comm signals for API.
1249 kes Fix a few places in lib/message.c where the open fd may
1251 kes Continue implementing lib/bsock.c (real class). Make jcr,
1252 who, host, and port private. There are new methods to access
1253 them for non-class use. This required touching a number of files.
1255 kes Add LANG=C to autoconf/randpass so it works with languages other
1256 than English. Fixes bug #788.
1258 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1260 You will not be able to generate Include/Exclude list any more.
1261 It will be fixed soon.
1262 If you want to use this, you can apply
1263 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1265 kes Restore of sockets created false error messages because Bacula
1266 no longer restores sockets, but the code was still trying to
1267 set the attributes on a non-existent file. Reported by a user.
1268 ebl finish RecyclePool feature
1269 Media will takes Pool.RecyclePool
1270 when moving from Scratch to a Pool or when user will do
1271 update volume=xxx frompool
1272 To use it, add RecyclePool = aPool to your Pool resource
1275 RecyclePool = Scratch
1279 kes Expand new BSOCK class adding signal() and new BNET signals.
1280 kes Begin enhancing the dot commands adding a new API function
1281 that returns more information and will make it easier
1282 to interface to the Director from a program.
1284 kes Make DEVICE fd private. Its new name is m_fd, and can be
1285 obtained with dev->fd() outside the class. This is the
1286 first of many DEVICE members to be made private.
1287 kes Implement Michael Renner's idea on having a virtual disk
1288 changer. I made some minor modifications (e.g. I did not
1289 implement the Virtual Changer directive, but simply set
1290 the Changer Command to an empty string.
1292 kes Implement a BSOCK send() method that writes the whole record
1293 in a single write() request rather than in two.
1294 ebl add update volume=xxx recyclepool=yyyy
1295 volume takes recyclepool from pool when using update volume=xxx from pool
1297 kes Fix encryption deblocking bug, which caused some restored files
1298 to be truncated. This fixes bug #763.
1299 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1300 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1302 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1303 ebl Use btime_t instead of uint64_t in media patch.
1305 kes Optimize the use of the database a bit in the Status dir command.
1306 Only open it when needed, ensure that if any previous database
1307 was opened, it is closed.
1309 kes Correct VolCatBytes bug from media patch.
1310 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1311 in the case of orphaned records.
1312 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1313 and File records in 300K chunks to be more efficient. This
1314 idea came from Juan Luis Frances (if I remember right).
1315 kes Apply Eric's scratch patch that moves a purged Volume to
1316 the RecyclePool. Question: how is RecyclePool set? what
1317 happens to the ScratchPool?
1318 kes Apply Eric's media patch that collects read/write media
1319 times as well as byte counts. This patch requires a
1320 simultaneous upgrade of the DIR and SD. Note, there
1321 should be some way to turn off timing. I'm not sure
1322 times are in Bacula units.
1323 kes Apply Eric's batch-insert patch.
1325 kes Update projects list.
1327 kes Implement Include/Exclude file lists in FD as dlists using
1328 the new dlistString class. This permits efficiently having
1329 large include/exclude lists and completes project Item 25.
1330 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1331 console is authorized to cancel the job. This fixes bug
1333 kes Modify SD so that the VolCatJobs medium record is updated
1334 at the beginning of a Job rather than the end. This
1335 fixes bug #775 where exceeding MaxVolJobs caused jobs
1337 kes Added a mutex around getting and setting Volume information
1338 so that multiple simultaneous jobs will single thread.
1340 Switch to using Subversion
1341 kes Remove src/pygtk-console/ from configure
1343 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1344 plus the entrypoints.
1345 kes Apply patch supplied that corrects debug print
1346 in canceling jobs for max run time. Supplied as
1347 part of bug #621, which was previously fixed.
1349 kes Test on job_canceled() and sd_msg_thread_done inside
1350 loop starting the message thread to avoid a race condition.
1352 kes Remove rl_catch_signal from console.c as it conflicted
1353 with the header definition. Fixes bug #765.
1354 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1356 kes Clarify some stored/acquire messages to indicate if the
1357 problem is with read or append.
1359 kes Fix memory leak with storage ids in cats/sql_get.c
1360 kes Terminate watchdog earlier to avoid reference to released
1361 memory -- reported by Jason Austin.
1362 kes Move closing the database from jobq.c to the director daemon
1363 termination routine. This fixes memory leaks for shadow jobs
1364 (i.e. migration jobs).
1365 kes Free up the unique jobid chain items in migrate.c. This fixes
1366 a memory leak problem.
1367 kes Convert some ugly looking for statements to use foreach_alist
1368 in findlib/find.c. This will facilitate converting the structures
1369 to use dlist (for large include/exclude lists).
1370 kes Fix a bug in the btree.c and btree.h routines, then rename them
1371 rblist and add them to be built in src/lib. Include some new
1372 methods written by Rudolf Cejka that make the code more readable
1373 (hides some of the ugly casting).
1374 kes Add set_next() and set_prev() methods which make the code much more
1375 readable. Also add a new dlistString class that facilitates storing
1376 strings in dlists. To be used in the large include/exclude lists.
1377 kes Make some trivial modifications to lib/tree.h that use rblist
1378 rather than dlist for storing the tree links. This was suggested
1379 by Rudolf Cejka. The result of this is that the restore tree now
1380 uses red-black binary trees rather than simple linked lists. This
1381 should give rather dramatic speed improvements for directories
1382 contining large numbers of directories/files (more than 10000).
1384 kes Fix maxruntime bug #621.
1386 ebl Implement the include JobID in spool file name project.
1387 kes Reorder projects file in order determined by Jan 2007 vote.
1388 kes Implement item #12 on project list -- quick release of FD by
1390 kes Fix open of SQLite3 db where user does not have write permission
1391 so that DIR does not crash. Fixes bug #761.
1393 kes Add back missing @ in Win32 Makefile.
1394 kes Change 'Device not configured to autolabel' from INFO
1396 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1397 which should restart an indefinite # of times.
1398 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1399 other DIR specifications.
1401 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1402 Fix path quoting in SQLite scripts.
1403 Fix problems with SHGetFolderPath.
1405 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1407 kes Fix Job restart on error bug that promotes an Inc to a Full
1408 backup. This should fix bug #755.
1409 kes Add qt-console and first cut of code.
1413 kes Fix Bacula->Documentation link on Win32 to point to index.html
1414 instead of bacula.html. Fixed bug #750.
1415 kes Return JobId in db_get_job_record() when JobId==0. This should
1417 kes Do not release source pointers when restarting a failed job.
1419 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1420 This *should* fix bug #747.
1421 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1424 kes Modify USTORE constructor to set an empty store_source string,
1425 and don't copy the store_source string in a cancel. Hopefully
1426 this will fix Arno's seg fault, bug #744.
1427 kes Add back code to disable conio in configure. Fixes bug #743.
1428 kes Correct the Options scanner in the FD to correctly handle
1429 SHA1 option, which was eating the next option. Reported by
1431 kes Add code to indicate when the SD is spooling, spool wait, and
1432 despooling as requested by Alan Brown.
1434 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob