1 Technical notes on version 2.3
5 kes A bit of crypto cleanup. More later.
7 kes Apply patch from Martin to correct bug #1040, bscan sets existing
9 kes Fixed important spelling error in doc -- bug #1045.
11 ebl Fix bextract to be able to extract non-portable Win32 data to
13 kes Move initialization of read/write res lock earlier in the code.
14 This fixes the crash with a null conf file. This fixes bug
16 kes Redefine CURES in lib/parse_conf to be URES and move it all
17 into lib/parse_conf.c -- this responds to bug #1042, but does
18 not fix it. The fix is not to compile with FORTIFY_SOURCE.
19 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
20 the trunk SVN. I don't think this was reported as a bug.
22 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
24 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
26 kes Add DataDespooling and DataCommitting status (committing is
28 kes Finish implementation of new reservations code noted below.
30 kes Fix bsnprintf for float point numbers. I broke recently when
31 parameterizing some variables. This fixes bug #1036.
32 kes Undo recent reservations changes ... will apply them later
33 when they work better.
35 ebl Fixes #1034 which cause mysql to hang the connection after 8h
36 ebl Change default statistics target of filename.name and path.path
37 fields for PostgreSQL. This speeds lookup by indexes. Thanks
39 kes A few more tweaks to new reservation code. Make sure to clear
40 vol released flag when retaking volume. When reading label and
41 label is bad mark volume unused. When recycling, mark volume
42 unused so it can be renamed.
44 kes Fix reserve_volume() so it doesn't release a volume in use
45 (i.e. a volume entry not marked released). This should be
46 the last part needed to fix bug #1018.
48 kes Move Heartbeat documentation from Job to Director resource.
51 kes Fix existing switch drive SD code to call autochanger to release
52 any old volume. This must be done to keep the autochanger from
53 releasing subsequently newly reserved volumes in doing a close().
54 This should fix bug #1018.
55 kes Fail if attempting to get console input in batch mode. This
56 should help fail RunScript console commands that are incomplete.
57 kes First cut implementing switch_drive() in SD (not actually called).
59 kes Implement first cut running console commands in a RunScript.
61 ebl Fixes bug #1028 where "Selection Type" option was not usable
63 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
68 kes Add new free_tls() entry point so that Win32 builds.
69 kes Fix compile warning in src/lib/util.c
70 kes Fix entry point for edit_job_codes() so that Win32 builds.
71 kes Fix seg fault Frank Sweetser reports in regression testing
72 on his systems. The problem was that the original author of
73 bsnprintf.c did not take into account the side effects of
74 using ++x in the argument to a #define.
75 kes Make SD protocol backward compatible with version 2.2.x.
77 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
78 because Bacula no longer restores sockets.
79 ebl Always use ignorecase fileset option on win32 FD.
81 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
82 that implements double quoting include names in conf files,
83 and also allows piping input by having the first character
84 be a vertical bar (|).
85 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
86 that implement %f in RunScripts to pass the FileSet name.
87 kes Skip leading | when lex input comes from a pipe as suggested
88 by Michael Stapelberg <michael@stapelberg.de>.
90 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
91 Nerijus Baliunas <nerijus@users.sourceforge.net>
93 kes Implement Plugin Directory and plugin events.
95 kes Implement a security enhancement: TLS authentication but no
96 encryption. Enabled by setting 'TLS Authentication = yes'.
97 Note when this is on, TLS encryption is turned OFF!
99 kes This patch corrects a problem where the maximum concurrent storage
100 jobs counter gets out of sync during restore jobs causing jobs to
101 'wait on max Storage jobs'. This patch fixes bug #1009.
103 kes This patch fixes bcopy so that it produces correct Volumes.
105 kes This patch eliminates spurious output to the console during a VerifyVolume
106 job that contains encrypted data. It fixes bug #1024.
108 kes This patch prevents the 'status dir' command from trying to use a scratch
109 volume and possibly moving it from one pool to another. This patch fixes
112 kes Add new include to postgresql.c suggested by Marc Cousins so
113 that it compiles correctly with pgre version 8.3.
115 kes Fix --archivedir addition to configure. Replace it with
116 --with-archivedir in configure.in This fixes the regression
118 kes This patch fixes bug #1012 where the job is canceled because
119 of Max Run Time exceeded when the job has not yet started.
121 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
122 one 'part' to write. Instead of each part being stored on disk,
123 written to DVD, then deleted from disk, all parts are written to disk,
124 and only the last is written and deleted from disk.
125 kes This patch fixes the status command to include the formating string for
126 JS_AttrInsterting. It fixes bug #1021.
127 kes This patch should fix the Mac OS X build problem on the latest
128 Darwin, where sys/types.h was not included correctly (apparently
129 due to a change in the Mac headers). The solution was to explicitly
130 ensure that it is defined for the ./configure.
131 This patch also has a rebuild of configure that includes the Debian
132 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
133 kes This patch should ensure that queued messages to the console are
134 displayed as soon as possible. It should fix bug 1007, but has been
135 reported not to work.
137 kes This patch fixes the infinite loop when trying to increase the
138 maximum number of volumes in a Pool during the add command.
139 This patch fixes bug #1008.
141 Release Version 2.2.6
143 db Remove extra data on estimate command in joblist for bat.
145 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
146 really change anything, but is the beginning of doing it *right*.
147 To do it completely right the LastWritten date must be passed to
148 the SD, but it is not yet done.
149 kes Minor tweaks to some bat restore SQL.
150 kes This patch fixes bug #1003 where putting the message output from
151 a Verify job into the catalog results in a recursive loop. The problem
152 seems to show up only with postgresql (to be verified).
153 kes Correct %x to %p in postgresql debug statement.
155 kes Fix bug #942 where lots of emails where generated when the heartbeat
156 interval was low and Bacula wanted a different tape from the one in
159 ebl Add new SD despooling attributes and Dir inserting attributes
160 job status codes in the catalog (Status table).
162 ebl Use qmake-qt4 instead of qmake when available (debian system).
164 kes Add a security warning to src/cats/make_catalog_backup.in indicating
165 that passing the password via the command line (arg 3) is insecure.
166 This responds to bug #990 (it doesn't fix it).
168 kes Set default debug_level to zero. This corrects bugs #991 and #993.
169 kes Fix a crash in bat when it cannot connect to the Director for example
170 if the Director is not running.
171 kes Remove redundant INDEX (JobId) from File table in the trunk.
173 kes Make explicit exception to GPL in LICENSE to permit linking
174 the Win32 FD with Microsoft VSS code.
175 kes Apply the Solaris package patch from
176 Masopust, Christian <christian.masopust@siemens.com>
177 kes Apply the patch to optionally add a timestamp in the debug output
178 submitted by Mariusz Czulada <manieq@wp.eu>.
180 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
181 backend (sql_strerror). Fixes bug #989
183 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
184 It applied with no problems.
185 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
187 kes Redirect stderror to stdin on mt status command in mtx-changer.in
188 since the status is returned on stderr on Solaris.
189 kes Activate Close button on tray-monitor window. This fixes
191 kes Check for NULL item in parse_conf.c before calling it. In the
192 case of Device, there is no item and this caused a seg fault when
193 Device appears in the conf file.
194 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
195 avoids pulling in config.h multiple times in some new code.
197 kes Fix spurious warning message printed when creating a volume with
198 a LabelFormat. This fixes bug #976.
200 Release Version 2.2.5
202 kes Add JobId in place of Job name in all the Jmsg() output.
203 kes Correct the APP_DESC for the Win32 storage service (remove an e).
205 kes Make maxvol-test and new more strict maxvol2-test work.
206 kes Print JobId in all Jmsg() job output.
208 kes Add new SD despooling attributes and Dir inserting attributes
209 job status codes. This fixes bug 961.
210 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
212 kes Fix doc issue. This fixes bug #963.
213 kes Fix listing performance problems in bat. Pointed out by
215 kes Remove old debug code.
216 kes Fix bat code that tests for Win32. This should fix bug #968
217 kes Query 5 list wrong Vol after migration. This fixes bug #960
219 ebl Fix #969 where user can't change Replace option in restore menu.
221 kes Save jcr in thread specific data (tsd) for each thread.
222 kes Make Dmsg() print JobId as -%u.
223 kes Make Jmsg, Emsg, and others automatically pickup the jobid
224 for the thread if it exists.
225 kes Remove old reservation debug jid code.
226 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
227 ebl Add an option that permit to specify spool size in job
228 definition. (Applying patches/testing/spoolsize_per_job.patch).
229 You must upgrade SD and DIR at the same time.
230 dvl Add new configuration item --archivedir
231 dvl Adjust regression tests to use tmp not /tmp. This will allow
232 multiple concurrent runs of the regression tests.
234 kes Fix race condition that drops final block written to volume.
235 This happens in rare cases with multiple simultaneous jobs
236 when the Volume fills. This fixes bug #964. May be related
237 to bug #935 and possibly #903.
238 kes Eliminate more strerror() and replace with bstrerror().
239 kes Remove BSD getopt and replace with unrestricted IBM version.
240 kes Fix Win32 build for changed calling sequences.
241 kes More tweaks to the mount volume routines to get everything
242 right. Changed variable name from find to have_vol, which is
243 much easier to understand.
244 kes Enhance btimer debug code.
246 kes Fix FD->SD authorization failure, which was due to spurious
247 wakeups from a pthread_cond_timedwait(). Simply check the
248 predicate before continuing. This fixes bug #953.
249 kes Add const char where needed (more to do). Remove temp debug code.
251 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
252 kes Don't overwrite error message in check_tables_version.
254 kes Unlock batch insert tables with same calls used elsewhere.
255 kes Allow starting 59 jobs a second.
256 kes Make SD session key more random.
257 kes Add retry for SQLite opening db if it fails. Probably helps
259 kes Suppress extra error messages during batch insert failure.
261 kes Add jcr to timer packets so if killed message can be sent to job.
262 kes Add JobId to all Dmsg() output.
263 kes Put some FD auth code on dbglvl rather than fixed.
264 kes Return insert attributes error message in db msg buffer to avoid
265 false error messages. Helps fix bug #966.
266 kes Separate batch init error messages. Probably helps fix bug #966.
267 kes Make SD code that contructs attribute insert check string lengths
269 kes If Dir gets an error during inserting attributes, cancel SD.
270 This reduces unnecessary error messages.
272 kes Correct search boolean for getting Volume info
273 ebl Cleanup batch insert code. Probably fixes bug #965.
274 kes Back out one small change to the reservation system (reserving a volume).
275 kes Rework how a Volume is mounted. It is now much more intelligent and
276 will always attempt to use any mounted volume if possible and reduces
277 calls to the Director asking about volumes.
279 kes Turn off some code when batch insert not enabled.
280 kes Edit FD name in connect error messages.
281 kes Rework the reservation system to take into account that the Director
282 might give us a Volume that is different from the current one being
283 used, and to ensure that we don't exceed Maximum Volume Jobs.
284 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
285 fatal error with multiple jobs running'
286 kes Add more debug code in reservation system.
287 kes Implement maxvol-test to check bug #947.
289 kes Add code to handle tray monitor separated from Win32 FD.
290 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
292 kes Add missed return in fixing verify bug -- trunk only.
293 ebl Fix a command parser issue causing a director segfault.
294 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
296 kes Increase the max block size to 4MB fixes bug #957.
297 kes ERABT if user sets min block size > max block size. Fixes bug #956.
298 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
299 is not properly mounted (recognized) during a poll.
300 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
301 Job that has differences reports Verify OK.
302 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
304 ebl Add an option to operate on all pools with update vol parameters.
305 This complete the project 20. Patch from Nigel Stepp.
306 ebl Add history support to bconsole when using readline.
307 Using Ctrl-D to exit doesn't update .bconsole_history
308 kes Modify new volume algorithm to use max MediaId for generating next
309 volume number rather than the count of Volumes. This should essentially
310 eliminate the failure rate if some volumes were deleted. Bug #921.
311 kes Begin implemention of Optimize Job Scheduling.
312 kes Implement restore callback that Dirk and I agreed on for bat
313 restore. This fixes bug #928. Restore of backup of zero files fails.
314 kes Fix SQL Catalog logging which broke with new db_escape_string
317 Release Version 2.2.4
319 kes Fix bacula_cats.def for new db_escape_string().
320 kes Increase size of name string when FD making connection to SD.
321 May fix bug #953. FD->SD connection failure.
323 kes Add code to help Dan debug 2drive-incremental-2disk test.
324 kes Add code to try to fix bug #908.
325 kes Add waits to multiple exit detection code to try to force pid
326 file to always be deleted.
327 kes Restore good dev.tar.gz to rescue set appropriate binary property.
329 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
330 trying to switch drives by checking for blocking before unblocking.
332 kes Cancel storage daemon in all cases where FD reports error. This
333 should fix virtually all cases of bug #920.
334 kes Fix db_escape_string() for MySQL which did not compile.
336 kes Fix error message that was clobbered when Dir tells SD it does not
337 have write permission on Volume. This should fix a minor point
338 in bug #942, but not the main problem.
339 kes Add code to cancel job in SD if FD connection fails. This should
341 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
342 dvl Pass jcr and db into db_escape_string() to enable better escaping
344 kes Fix migration code to get correct Volume name with multiple volumes
345 by skipping |. Fixes bug #936.
346 kes Implement patch supplied by Landon to fix bug #944 where using
347 TLS with bconsole uses 99+% of the CPU.
348 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
350 kes Move patches into patches directory.
352 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
355 ebl Using 'm' in bconsole will show messages like before,
356 and not memory usage.
357 kes Fix bug #935, and probably also bug #903 where files were not
358 restored. MediaId was not properly set in JobMedia record after
361 kes Suppress chown and chmod error messages if the FD is not running
364 kes Apply Martin Simmons' patch that should turn off the new API usage
365 when batch insert is turned off allowing building on older
367 kes Add ./configure search in qwt-qt4 for qwt package
369 kes Bacula is now free of 3rd party GPL copyrighted code!
371 kes Add guid_to_name.c/h which replace idcache.
372 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
374 ebl Detect if new PosgreSQL batch insert API is present.
375 kes Correct incorrect mempool call causing Director crash. Occurs on
376 systems without va_copy().
377 sb Update spec files for 2.2.1 release
379 kes Fix memory pool call in ua_output.c. bug #934.
380 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
381 Add test program to fnmatch.c
383 kes Integrate patch to README.vc8 from
384 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
385 edit it to get it into Unix patch format.
386 kes Implement mkpath.c to replace old FSF makepath.c
388 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
390 Release Version 2.2.1
392 kes Update POTFILES.in
393 kes Cleanup a few underquoted AC_DEFUNs in configure
394 kes Apply patch from Martin Simmons that adds a test for va_copy to
397 kes Fix bug #921 by increasing the number of tries to create a new volume
399 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
400 can be called multiple times. Implement a version for machines
401 without va_copy() that gets a big buffer.
403 kes Integrate more portable zone offset code into bsmtp.c
404 Submitted by Attila Fülöp.
406 kes Fix bad SD->FD return status reported by
407 (James Harper) <james.harper@bendigoit.com.au>
408 ebl Fix a bug in read_close_session which return random status
409 thanks to James Harper
411 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
412 and directory names during restore of single file/directories.
413 kes Add sanity checks to .sql command when string is empty. Hopefully
414 that will resolve Dirks Director crash.
416 kes Apply patch submitted by Martin Simmons that corrects a seg fault
417 in the bsmtp chat subroutine when debug is >= 10.
419 kes Fix Director crash when running bat SQL queries.
420 kes Add David's notes on Item 8: Copy pools.
422 kes Rework projects file to be current and ready for a vote.
423 kes Enhance lex scanner error message.
425 kes Tweak LICENSE file to mention BSD code.
426 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
427 if specified on the ./configure.
428 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
429 This class is intended to allow us to open a second bsock to the
430 Director while in the restore subdialog.
432 kes Fix configure to create bat Makefile before creating dependencies.
433 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
434 kes Add a tooltip to the tray monitor.
435 dvl Set the Director's PID file before dropping privs. This fixes
438 kes Update AUTHORs file
439 kes Increase the default max concurrent jobs to 20 in FD and SD to
440 correspond with the default .conf files.
441 kes Rewrite the Win32 service routines. This eliminates the 3 copies
442 some different, of the same file created by RN when porting the
444 kes Rearrange some of the Win32 directories and the placement of the files
446 kes Set DEVELOPER flag in version.h
448 ========================================================================
449 Release Version 2.2.0
451 kes Apply a second doc patch from Marc.
452 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
453 improves the tips section that discusses how to setup multiple
456 kes Update bat README file.
457 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
458 corrects a typo in the Recycle status check in db_find_next_volume().
459 This will probably fix a number of annoying problems with multiple
461 kes Modify most of dird/msgchan.c to use bsock class calls rather than
462 bnet calls -- no functionality change.
464 kes Modify the Verify output to specify if files are missing on
465 the Volume(s) or disk. Fixes confusion in bug #916.
466 kes When more than one Volume is read in a migration job, the last
467 Volume bytes reported are from the last read volume rather than
468 the last written volume. Fixed. This fixes bug #910.
469 kes Fix display of Recycle flag after update volume=foo recycle=yes.
470 It previously printed New Recyle flag is: no. This fixes bug
473 kes Correct seg fault when switching tape drives during restore.
474 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
475 be used until after 2.2.0 release.
477 kes Remove fnmatch() in SD that permitted wild card specifications.
480 kes Fix %g in filename returned by SQL for browse tree reported by
482 kes Fix configure so that it puts config.out in the cwd rather than
484 kes Attempt to fix the locking problem reported by Eric in bug #906.
485 kes Make berrno class to leave errno unchanged after constructor call.
486 kes Make bnet_server use the heap rather than the stack to allocate
487 its socket fd pointers to avoid a crash at termination. Problem
488 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
490 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
491 and putting it in depkgs-qt along with Qt4.3.
493 kes Rework code in acquire.c that switches drives for reading when
494 the Media Type does not match. This should fix bug #906
496 ebl Fix a director segfault during job setup #907
497 kes Correct seg fault in postgresql when first operation returns no
498 rows. Fixes Dirks File browser problem seg fault with bat.
500 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
501 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
504 kes Implement PopUp YES/NO dialog for bat.
506 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
508 kes Correct RunScript to terminate job in FD on failure.
509 kes Change abort_on_error and AbortJobOnError to fail_on_error
510 and FailJobOnError in RunScripts.
511 kes Minor tweaks of code formating in RunScripts, principally to
512 avoid depassing 80 columns.
514 kes Eliminate one #ifdef Win32 in bsmtp
515 kes Implement grow tool to grow a file for testing very large databases.
516 kes Add big-vol-test to test Bacula seeking with > 5GB.
519 kes Modify find_next_volume() to return all values in Media record.
520 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
524 kes Update Release notes
526 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
527 Warning, in previous beta version, all media get from scratch keep their
530 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
531 This should fix bug #842. Made a note to look at removing the temp
532 files at the end of the install.
533 kes Add ability to mount and unmount a file device providing it is
534 marked as being removable and has the appropriate mount and unmount
535 commands defined in the Device resource. This fixes bug #830.
536 kes When applying a storage override, release all previous storage
537 definitions rather than just prepending the new storage.
538 This should prevent a good deal of confusion.
540 kes Implement ./configure search for qwt libraries.
542 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
543 Win32 FD. This should fix bug #893.
544 kes Remove an unnecessary beep in Win32 init code.
545 kes Update copyright dates in Win32 executable about boxes.
546 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
547 code with a BSD getopt.c and getopt.h.
548 kes Remove sched.h from the Win32 compat directory -- not used.
549 kes Remove the Exit menu item from the Win32 tray monitor. If you really
550 need to shut it down, do it through the services panel or the command
552 kes Remove some inappropriate Bacula FSFE copyrights.
553 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
554 kes Fix regress config non-portable test as pointed out by
555 Florian Heigl <florian.heigl@gmail.com>
556 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
557 as pointed out by Florian Heigl <florian.heigl@gmail.com>
559 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
560 Reported by Frank Sweetser.
564 kes Fix client-only build.
565 kes Integrate client-only fixes for bsys (initgroups) and conio from
566 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
567 kes Make arguments to get_scratch_volume() in same order as other
569 kes Rework the prune_volumes() subroutine so that after purging and
570 no volume found in desired pool, it will check for a scratch
571 volume. This prevents recycling the whole scratch pool.
572 kes Add code to status storage to print boffset_t (largefile support).
574 kes Move qwt (Graphics libarary for Qt4) to depkgs.
575 kes You now need a --with-qwt=<dir> to be able to build bat.
576 kes Update src/win32/cats/bacula_cats.def to include the new
577 db_get_query_dbids() call on Win32.
579 kes Correct a problem when selecting a scratch volume and moving
580 it to another pool that lost some columns.
581 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
582 kes Enhance Autochanger error messages to include Volume and device name.
583 kes Rework prune_volumes() code to take account of InChanger flag,
584 and to handle recycling volumes going to the Scratch pool and
585 current pool because the RecyclePool directive.
586 kes Implement a better and more efficient db_get_query_dbids() to
587 handle creating and passing back a list of DBIds.
591 kes Start work on new more efficient DBId subroutine. First use
592 will be for recycling volume to Scratch inchanger.
593 kes Increase number of JobIds in pruning from 1000 to 10000.
594 This to be replaced by above routine.
595 kes Begin implementation of building Qt4 on Win32.
596 kes Correct typo in fix I added for bad TLS shutdown.
597 kes Pull 2.0.3 patches into patches directory.
598 kes Update Release notes. Include qt-console in line count.
599 kes Update Projects file.
601 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
602 bug in migration code where a job that spanned two volumes
605 kes Implement new BST_DESPOOLING blocked state. Change from locking
606 during despooling in SD to blocking. This means that other threads
607 can work with the device structure, in particular the reservations
608 system while despooling.
610 kes Fix return in reservation message queue that missed clearing
611 the jcr lock (implemented 26Jun07 below).
612 kes Rename a number of dev methods to make locking function names
614 kes Document locking in lock.c. Move lock structures to new file
617 kes Move reservations message lock to lock jcr only this
619 kes Move main SD locking code into lock.c (new file).
620 kes Update Win32 build to include lock.c
624 kes Dirk committed the qwt library code for drawing graphs in bat.
625 kes Tweak install of qwt so that it is integrated with ./configure.
627 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
628 out by Eric (my typo).
629 ebl Fix configure.in to get batch mode enable
630 kes Return correct string from authenticate.cpp in bat when connecting
632 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
633 spurious line drops when using TLS.
634 kes Do not file reparse points when restoring a file that already
637 kes Implement Windows reparse points -- similar to directories, but
638 we do not descend into it. This is a first cut. They seem to
639 be backed up, but restore is not yet tested.
640 kes Remove restore_blocking in tls code when shutting a socket to leave
641 it in blocking mode. Hopefully this will fix the encryption bug
642 reported by Frank Sweetser.
643 kes When opening a file for backup, tell the OS that we are going to
644 read it sequentially -- optimization.
645 kes Change variable names in authenticate_director() to not conflict
646 with member names in bat. Caused great confusion with compiler,
649 kes Queue openssl error messages in case of comm problem.
650 kes Do shutdown() call if socket terminated.
651 kes Remove some duplicated code in tls.c
652 kes Move more of the bsock member variables into private and access
654 kes Add Frank Sweetser's tls-test to the regression suite.
656 kes Add Swedish sv.po file
658 kes Don't print clock skew message in FD if less than 3 seconds diff.
659 kes Add a bit of VSS info to status client.
660 kes Implement a first cut of Vista VSS, using Win2003 code.
664 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
665 loaded tape but uses first drive).
666 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
667 This was indeed a Win32 issue.
669 kes Simplify search of autochanger for in-use Volume.
670 kes Fix exit condition of check for in-use volume. kes Remove
671 inappropriate my_postgresql_free_result() in db_close()
673 kes Fix bad return in FD when encryption signature not found.
674 Probably caused a crash.
675 kes Inhibit missing encryption signature error messages for
676 file types where no signature computed.
677 kes Correct inverted check on autochanger in reservation system.
678 kes Tweak debug code in autochanger reservation.
680 kes Add some additional locking in the cats directory in subroutines
681 that modify packet variables called from batch insert.
682 kes Rework how dcrs are allocated. new_dcr() can now be called
683 with an existing pointer, and it will simply clean it up.
684 This allows the reservation system to test various different
685 devices, and will permit easy device changes.
686 kes A bunch of changes all over to handle new new_dcr() calling
688 kes Work more on the Volume management in the SD. Remember Volumes
689 for tape drives and for autochangers (even virtual disk changers).
690 kes When looking at the Volume list to reserve a drive, handle
691 autochanger names correctly by interating through the changer
692 devices. Also call the Director to see if a Volume is suitable
694 kes Fix some bugs in bscan. Make sure all media records are written.
695 Make sure that valid JobMedia records are written for disk files.
696 Previously they were completely wrong.
697 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
698 that the URLs don't change and so that the developers will all
699 work off the same copy. Rebuild from scrach.
700 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
704 kes Fix seg fault in FD from incorrect digest size.
705 kes Fix argument to non-OpenSSL crypto.c subroutine.
709 kes Remove a few malloc()s from the encryption code.
710 kes Use the class calls to bsock in filed/backup.c and restore.c in
711 place of the old bnet_xxx code.
712 kes Implement code that does an on the fly calculation of the
713 signing digest during restore of encrypted files. It makes
714 a best guess at the algorithm, and if it is not correct, will
715 then revert to the old code which reads the file after it is
717 kes Implement at least one missing crypto stream in stream_to_ascii()
718 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
719 #877 where a reload with bad syntax causes Dir to exit.
721 Cut: 2.1.14 beta (not released)
723 kes Do not free a volume on a tape drive until another volume is
724 mounted and read, or the autochanger unloads the volume.
725 This should help the SD re-use volumes that are already mounted,
726 and should fix bug #886.
727 kes Apply patch from user brettedgar that allows gnome2-console include
728 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
729 kes Apply patch from Lucien Weller that fixes day of week calculation
730 because of DST flag problem. Fixes bug #887.
732 kes Move find_next_appendable_volume() to after acquiring a valid device
733 in reserve.c. This fixes bug #864 -- confirmed by reporter.
735 kes Unable to reproduce bug 872. However added additional testing for
737 kes Bug #874 resolved by documenting SQLite limitations.
738 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
739 kes Bug #881 resolved by removing typo in mtx-changer script.
740 kes Made Frank Sweetser's wiki the official Bacula wiki with his
741 approval. Added a link to the wiki on the web page, and implemented
742 a backup from http://paramount.ind.wpi.edu
744 kes Fix update allfrompool to pass pool name.
746 kes Convert to pure GPL v2 license.
747 kes Fix sscanf problems reported by Peter Buschman that caused
748 a bus error on Solaris.
749 kes Rework (simplify) the select prompt in bat.
750 kes Move get_jobid_from_tid() into lib and create a
752 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
753 should definitely fix the problem of lost error messages in the
755 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
756 kes Eliminate tcpd.h from the project. Enclose the #include from the
757 library with extern C ...
758 kes Add print of signal name when a signal is trapped.
762 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
764 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
765 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
766 makes SQLit3 run 30 times faster, though a bit less safe.
767 kes Implement --with-batch-insert in configure and detection of thread
768 safe libraries. It is on by default, but turned off if no thread
769 safe library (e.g. SQLite 2) is available.
771 kes Fix Bacula PostgreSQL buffer overruns.
772 kes Do better checking for NULL results returned from PostgreSQL;
773 implement retry for failed queries; clear results buffer after
774 failed query. Hopefully this will correct the PostgreSQL failures.
776 kes Implement algorithm to handle only one appendable volume with
777 Prefer Mounted Volumes = no.
778 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
779 returned from a query.
780 kes Make volume lock recursive.
781 kes Implement an additional volume reservation algorithm that
782 starts by considering all reserved volumes then uses the
783 old brute force algorithm of searching the resources to
784 find a suitable device.
785 kes Add new reservations debug code and refine the old code.
786 kes Update the win32/dll/bacula.defs file.
788 kes Tweak reservations algorithm to permit a few more cases, i.e.
789 volume reserved, but on different drive, ...
790 kes Enhance SD status to include Pool and Media Type for drive in a
791 more readable format (a bit longer).
792 kes Fix PostgreSQL double free.
794 kes Minor refactoring of restore decryption code.
795 kes Add code to smartall.c to detect double free of a buffer.
797 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
798 so that bsmtp will create a correct email address (mailbox only).
799 kes Modify 'memory' command so that the buffers are listed as 'In use'
800 to avoid confusion with Orphaned buffers.
801 kes I reworked the OpenSSL include/lib flags to be handled in
802 the standard Bacula way, which should fix bug #863 concerning
803 non-standard OpenSSL libraries.
805 kes Implement Help Browser window for bat.
806 kes Fix reload bug that reset StorageId to zero.
808 kes Fix TLS #ifdefing when TLS turned off.
809 kes Ensure that when labelling a tape with Slot=0 that InChanger
811 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
813 kes Add StartTime to final uar_sel_jobid_temp query so that we can
814 add DISTINCT (required by PostgreSQL).
815 kes Implement BSOCK authenticate_director() method. Eventually will
816 authenicate all daemons.
817 kes Move several more functions into the BSOCK class.
819 kes Add code to tell the OS that we no longer need a cached
820 file that we were reading. In findlib/bfile.c. Also,
821 only cache files that we are reading. Thanks to
822 Tobias Oetiker <tobi@oetiker.ch> for the idea.
823 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
824 kes Implement script to automatically generate cats and dll .def
826 kes Update README.mingw32 to include new .def file generation.
827 kes Correct typo in UTF-8 error message as reported by:
828 jhernandez <julianhernandez@gmail.com>
829 kes Add additional sm_check() code on debug level 1.
830 kes Set default debug level to 1.
831 kes Trap SIGABRT in attempt to get traceback.
833 kes Reduce bat connect timeout from 30 to 15 seconds.
834 kes More restructuring and implementing BSOCK class in place of
836 kes Remove a few unnecessary malloc() tests in crypto code.
837 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
838 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
839 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
841 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
843 kes Fix Verify InitCatalog. The attributes were not pointing to the
844 correct saved location.
845 kes Implement message callback so that GUI is sure to get all
846 daemon messages. Currently displayed in a dialog in bat.
847 kes Ignore SIGUSR2 (Bacula timer) in bat.
848 kes Apply regress patch from bug #859 to allow regress to work
849 with Solaris compiler.
851 kes Begin adding TLS support to bat.
852 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
853 clean up lex.c and make it more readable.
855 kes Move more bnet functions into the BSOCK class.
856 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
857 kes Complete change of berrno strerror() method to bstrerror()
861 kes Cleanup incorrect email addresses in bsmtp.
862 kes Make bat display initial messages rather than discard them.
864 kes First cut of adding .mod to the run command.
865 kes Implement auto display of messages in bat.
866 kes Enhanced preferences to allow all Bacula output to be
869 kes Try to make bsmtp date routines more generic.
870 kes Fixed bug #856 autochanger documentation.
871 kes Rework bsmtp date editing for Win32. This fixes bug #854.
872 kes Add new cats entry point so Win32 builds.
874 kes Attempt to fix bsmtp date editing on OSes without %z editing.
876 kes Do better checking for the MySQL 64 bit libraries looking for both
877 .a and .so libraries.
878 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
879 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
880 kes Require the thread safe version of MySQL during configure. Thanks
881 to Andre Noll for pointing this out.
882 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
883 continuing in migration code.
884 kes Apply implementation of tray-monitor font derived from gnome-console
885 submitted by Andreas Piesk <a.piesk@gmx.net>
887 kes Eliminate important memory loss in SQLite
888 kes Fixed the batch insert MySQL thread specific data that was not
889 being freed. See cats/mysql.c:db_thread_cleanup().
890 kes Fix restore before command.
891 kes Convert old hdr.name to name() in a few places.
892 kes Implement update jobid command.
893 kes Return all time_t dates in db_get_job_record()
894 kes Stop watchdog in SD earlier.
895 kes Put Pool just after Storage in please mount message.
896 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
899 kes Update the po files.
900 kes Fix Verify InitCatalog by making it cache attributes.
902 kes Change name bacula-bat to bat for man 1 page to correspond to
904 kes Check for client and store NULL pointers in status command. This
906 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
907 kes Fix sign extended editing of %p.
908 kes Clean out a little old #ifdefing in cats/mysql.c
910 kes If time diff between DIR and FD is more than 600 seconds convert
911 INFO message to WARNING.
912 kes Implement heap size display in status for all daemons.
913 kes Attempt to fix MySQL db open memory loss (not successfull).
914 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
915 kes Eliminate memory loss in MySQL (possibly other SQLs) during
916 Query. This looks like a MySQL but but by doing extra releases,
917 the memory goes away. This should fix bug #847.
919 kes When backup fails, cancel SD before waiting for sd termination.
920 kes If SD is waiting for FD to connect during cancel, wake up the
922 kes Fix fsf code so that errno is correctly reported.
923 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
925 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
926 so that Bacula doesn't later stumble into a seg fault.
927 kes Use the term Restore Client in the restore Job report.
928 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
929 the original job's FileSetId.
930 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
931 spooling in migration jobs. Not yet tested.
932 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
933 reading conf file from a pipe. However, do it with open_bpipe()
934 rather than popen. Not yet tested.
936 kes Fix an ugly bug where the VolCatBytes were getting updated
938 kes Implement bconsole memory command that prints current memory
939 usage, plus smartalloc dump.
940 kes Clarify some error messages in backup, admin, and migrate.
941 kes Shrink label dialog to smaller size.
942 kes Invert Cancel OK buttons on restore to be OK Cancel.
943 kes More strerror() to bstrerror() conversions.
945 kes Start implementing bstrerror() in place of strerror().
946 kes Stripping path -- seems to work.
948 kes Prevent door and port files from being restored (mostly
950 kes Free an unreleased buffer in compat code.
951 kes Change console Job name from *Console* to -Console- to eliminate
952 Win32 filename problems. Put Win32 path separator when creating
953 Console file. This fixes bug #846.
954 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
956 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
958 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
959 to force Win32 error message.
961 kes First cut strip path. The data should be passed to the FD,
962 but nothing is done with it yet.
963 kes Enhance the digest and signature routines in the crypto
964 library to accept a JCR and to use it to print error messages
965 so that they will go in the Job report rather than the daemon's
967 kes Simplify some of the verify signature code.
968 kes Simplify a few of the alternative returns in the signature
971 ebl Use only POSIX regex instead of GNU regex in breg.c for
972 File relocation. It fix broken freebsd compilation.
973 kes Convert all other Dir files to use new ua class message
975 kes Tentative fix for missing digest signature in bug 807.
976 kes Correct handle problem in new win32_ftruncate routine.
977 kes Convert ua_purge.c and ua_update.c to use new ua class
978 message routines for bat.
980 kes Correct incorrect installation of LICENSE in Win32 installer.
981 kes Display LICENSE at the beginning of the Win32 install.
982 kes Attempt to correct the need for the png files to be installed
984 kes Reapply my bat.conf install script in qt-console. I think I
985 editted bat.pro instead of bat.pro.in and it was lost.
986 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
987 the /var/lock/subsys for subsysdir. Also corrects typos in the
990 kes First cut update job.
991 kes Correct configure to include qmake of src/qt-console directory.
993 kes Make restore job yes/mod/no print in one command so GUI works.
994 kes First cut implementing backup and restore client.
995 kes Correct editing in Verify output that caused a seg fault.
997 kes Insure that bat.conf is not overwritten during installation.
998 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
999 while I was implementing migration in March 2006 !
1001 ebl Cleanup file relocation, using char *RegexWhere instead of
1002 char *where + bool where_use_regexp
1003 kes Update some manpages and add bat manpage.
1004 kes Make a first cut at converting bacula.spec.in for bwx-console
1006 kes Apply patch from John Goerzen to add hostname as fourth argument
1007 to make_catalog_backup script.
1008 kes Fix typos I introduced into bsmtp.c
1009 kes Make pm_strxxx() routines handle input of NULL pointer. This
1010 is to protect from NULL pointers returned from SQL databases.
1011 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1012 kes Add more debug to FIFO code -- fix fifo regression test.
1014 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1015 kes Add thread timer to bnet_connect() to break from OS if wait time
1018 kes Update Win32 build to include new files, new symbols, and
1020 kes Implement socket level heartbeat (tcp_keepidle)
1021 ebl Commit File relocation patch
1022 kes Make bat have 'make install' target.
1023 kes Warn during install if old gnome-console binary found.
1024 kes Warn during install if old wx-console binary found.
1025 kes Add -8 option to bsmtp command line to add content type utf-8.
1026 Fixes bug #809. (Character coding problem in bsmtp).
1027 kes If < is found in target (from, to, cc) then do not enclose the
1028 target in < > in bsmtp. Fixes bug #772 (malformed address).
1029 kes When printing certain items in dbcheck, stop after 300000.
1030 Fixes bug #822. (dbcheck loops).
1031 kes Incorrect status in Dir after waiting for mount with poll set.
1034 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1036 kes Print waiting to reserve a device every 5 mins.
1038 kes Don't call close_part in label.c if tape and relabel.
1039 kes Don't free volume if busy in close() -- should help with
1041 ebl Fix #824 RunScript bug (After script could be execute twice)
1042 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1043 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1044 Add a regression script to test RunScript
1046 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1049 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1050 deprecated. No additional bugs will be fixed, and they will be dropped
1051 in a future release (probably 2.4.0).
1052 kes Change name of wx-console to bwx-console to make it more Bacula
1054 kes Change the name of gnome-console to bgnome-console to make it
1057 kes Some time in March, a Feature Request with patch from Jorj Bauer
1058 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1060 The ability for the director to validate a Client (FD) CN against
1061 an arbitrary set of patterns rather than the hostname, with
1062 A new 'TLS Allowed CN' set of directives which are implemented
1063 in the Client resource. Then pattern matching is used in place
1064 of hostname matching against the Certificate's CN. As an example, we
1065 have certificates which (a) use a local CA, and (b) have a CN of the
1067 kes Add new/changed entry points to Win32 build
1068 kes Create unaccepted-projects for projects that are not accepted.
1069 kes Simplify locking in the reservations system.
1070 kes Add more debug code in reservations.
1071 kes Make sure error condition on reserving a volume is handled correctly.
1072 kes Correct handling of volume_in_use.
1073 kes Correct handling of initializing a device.
1074 kes Move handling of broadcasting releasing a device into release_device().
1075 kes Correct attaching dcr to dev so that it is only done if device
1076 is properly initiated.
1078 kes Locking debug level tweaks in SD.
1079 kes Tweak new Volume code.
1081 kes Add exec external-command [wait-seconds] to bconsole. This
1082 executes the external-command. Note! normally external-command
1083 should be enclosed in double quotes.
1084 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1085 it should normally be off in a production system.
1087 kes Implement die command for SD so that we can force it to dump.
1088 kes Implement SD lock debug code.
1089 kes Implement new algorithm for keeping Volume list in SD. It
1090 is now owned by the device.
1092 kes Implement new code for freeing in use volumes that should
1093 resolve if not all, some of the problems of multiple drive
1094 tape conflicts described in bug 801.
1096 kes Fix gui/bacula-web/images files in svn.
1097 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1099 ebl Fix a bug in batch mode (in string escape)
1100 kes Correct migration prune SQL typo that crept in in a
1101 recent 2.1.x change.
1103 kes Move bnet_despool() into class in bsock.c
1104 kes Modify job report to include director name and Build OS.
1105 kes Move drop root privilege and check_catalog() before fork.
1106 kes Add update database scripts (version 9 to 10) to updatedb directory.
1108 ebl Check size and age of each file after its backup to see if
1109 it has changed during backup, if 'checkfilechanges' is set.
1110 The FD will do an extra check (stat(2)) after
1111 each file backup. mtime, ctime and size are compared with
1112 'before backup' information. If time or size mismatch, an
1113 error message will be generated. You must upgrade FD to use it.
1115 kes Make database name and user configurable
1116 --with-db-name=xxx --with-db-user=xxx
1117 kes Add back database type to message.c for debugging.
1119 kes Implement dir_sql() which issues an SQL query.
1120 kes Modify bat medialist to use dir_sql() and do some minor C++
1121 formatting as well as eliminating a number of pointers, simplifing
1124 kes Fix some of the mtx-changer grep commands for tape label readers.
1125 kes Convert a number of bsendmsg into the appropriate send/warning/error
1126 message class calls.
1127 kes Suppress the using database message in the .sql command.
1128 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1130 kes Add context menu for floating a window.
1131 kes Some minor cleanup and name changes in qt-console
1132 kes Add doing mt setblk 0 in Win32 mtx-changer.
1133 kes Apply Martin's bug fix to move definition of ENODATA for
1135 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1136 sqlite2 and sqlite3.
1138 kes More pruning cleanup.
1139 kes Turn on wait_for_drive by default in mtx-changer.
1140 kes Turn on Batch insert code by default as it now passes regression.
1141 kes Add ./configure --enable-bat to enable building of Bat.
1142 No install yet though.
1144 kes Implement a new .sql command for bat.
1145 kes Implement code to turn off pruning in obtaining the next volume.
1146 Pruning is turned off for the status dir command, but turned on
1147 for SD requests and for the list nextvolume command.
1149 kes Correct Qmsg() that was not updated correctly when committing a
1150 previous change (probably the recent TLS patch).
1152 kes Write new subroutine is_volume_purged() that explicitly checks
1153 if the Volume is purged, and if so marks it as such. This should
1154 resolve problems reported about needing to mount twice to recycle
1156 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1157 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1158 amount of duplicated code.
1159 kes Do volume pruning only for the Media Type desired (reduces pruning time
1160 if multiple Media Types are in the same pool).
1161 kes Implement more detailed info in the Job report for the Bacula version
1163 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1165 ebl Add bbatch tool to bench database and insert mode.
1166 Fix sql quote stuff in batch mode
1167 Fix sql stuff for mysql
1169 kes Correct problems with am/pm scheduling. Fixes bug #808.
1170 kes Implement new prunning code that prunes up to 1000 jobs at
1171 the same time. The same technique can be applied to a number
1172 of other prune/purge subroutines.
1173 kes Add an insanity check when starting a new tape job to ensure
1174 that the tape position has not been changed. If so fail the
1176 kes Fix Win32 build for dlls to add the folllowing:
1177 src/lib/bsock.c -- new file with new entry points
1178 src/lib/dlist.c -- new entry points
1179 src/cats/sql_create.c -- new entry point
1180 src/cats/sql_cmds.c -- new DATA item exported
1182 ebl batch mode cleanup bscan-test is ok now.
1183 kes Implement SD code to check length of disk volume before appending.
1185 kes Correct return status on db_batch... routines.
1186 kes Add call to db_write_batch_file_records() to migration code.
1187 ebl Fix AfterJob timing
1188 kes Move the checking of the database in initializion of the Director
1189 to after we drop privileges. This avoids the need for both root
1190 and bacula access to the DB.
1191 kes Correct a misplaced variable definition in src/filed/backup.c
1192 kes Correct how the new batch insert db_create_attributes_record()
1193 uses the arguments. Caused a seg fault in bscan.
1194 kes Implement lock() and unlock() methods in DEVICE class.
1195 Implement block() and set_block(xx) methods in DEVICE class.
1196 kes Modify bnet_connect() so that it uses time() to check for the
1197 wait time expiring (on some OSes, some system calls may not
1198 return immediately).
1199 kes Modify Verify to obtain the previous JobId when it is actually
1200 running rather than at schedule time (as it was in 1.38.x).
1201 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1203 kes When checking pid in pid file, continue running if the pid is
1204 the same as ours. This occurs on IRIX after a system crash.
1207 kes Extend new GUI API.
1208 kes Make the ua structure a class, and implement send_msg(),
1209 error_msg(), warning_msg(), and info_msg().
1211 kes Apply fix from for building wx-console on the Mac from
1213 kes Implement new select mechanism for GUI programs.
1214 kes Reorganize initialization of stackedWidgets in bat.
1216 kes Add updated nagios plugin supplied by Christian Masopust.
1218 kes More bat implementation.
1219 kes File migrate bug with Pool Occupancy using mediaid instead
1220 of jobids. Fixes bug #795.
1221 kes Fix orphaned buffers in filed backup and verify due to
1222 crypto buffers not freed during errors. Fixes bug #789.
1223 kes Extend new GUI api code to tree commands.
1224 kes Ensure that tree and dot commands check console ACLs.
1225 kes Permit marking directory with trailing slash.
1226 kes Allow 20 console connections (instead of only 10).
1228 kes Add smartctl call to bacula-sd.conf as an example of getting
1231 kes Modify jobq.c to let simultaneous restore jobs run. This may
1232 cause them to fail if they cannot get a drive.
1233 kes Add Client Connect Wait to Storage daemon to permit users to
1234 modify the time the SD waits for a FD connection.
1236 kes Correct virtual changer check which was backwards. This caused
1237 volumes to be unloaded into slots already occupied.
1239 kes Apply Command ACL filter to JobId list in restore command.
1240 kes Correct typeo in var.c patch.
1242 kes Don't let Bacula prune File or Job records for the current Job.
1243 kes Fix variable substitution pad + inc bug reported (with patch)
1246 kes Correct SQLite log table index as reported by Luca Berra.
1248 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1250 kes Begin implementing new comm signals for API.
1251 kes Fix a few places in lib/message.c where the open fd may
1253 kes Continue implementing lib/bsock.c (real class). Make jcr,
1254 who, host, and port private. There are new methods to access
1255 them for non-class use. This required touching a number of files.
1257 kes Add LANG=C to autoconf/randpass so it works with languages other
1258 than English. Fixes bug #788.
1260 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1262 You will not be able to generate Include/Exclude list any more.
1263 It will be fixed soon.
1264 If you want to use this, you can apply
1265 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1267 kes Restore of sockets created false error messages because Bacula
1268 no longer restores sockets, but the code was still trying to
1269 set the attributes on a non-existent file. Reported by a user.
1270 ebl finish RecyclePool feature
1271 Media will takes Pool.RecyclePool
1272 when moving from Scratch to a Pool or when user will do
1273 update volume=xxx frompool
1274 To use it, add RecyclePool = aPool to your Pool resource
1277 RecyclePool = Scratch
1281 kes Expand new BSOCK class adding signal() and new BNET signals.
1282 kes Begin enhancing the dot commands adding a new API function
1283 that returns more information and will make it easier
1284 to interface to the Director from a program.
1286 kes Make DEVICE fd private. Its new name is m_fd, and can be
1287 obtained with dev->fd() outside the class. This is the
1288 first of many DEVICE members to be made private.
1289 kes Implement Michael Renner's idea on having a virtual disk
1290 changer. I made some minor modifications (e.g. I did not
1291 implement the Virtual Changer directive, but simply set
1292 the Changer Command to an empty string.
1294 kes Implement a BSOCK send() method that writes the whole record
1295 in a single write() request rather than in two.
1296 ebl add update volume=xxx recyclepool=yyyy
1297 volume takes recyclepool from pool when using update volume=xxx from pool
1299 kes Fix encryption deblocking bug, which caused some restored files
1300 to be truncated. This fixes bug #763.
1301 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1302 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1304 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1305 ebl Use btime_t instead of uint64_t in media patch.
1307 kes Optimize the use of the database a bit in the Status dir command.
1308 Only open it when needed, ensure that if any previous database
1309 was opened, it is closed.
1311 kes Correct VolCatBytes bug from media patch.
1312 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1313 in the case of orphaned records.
1314 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1315 and File records in 300K chunks to be more efficient. This
1316 idea came from Juan Luis Frances (if I remember right).
1317 kes Apply Eric's scratch patch that moves a purged Volume to
1318 the RecyclePool. Question: how is RecyclePool set? what
1319 happens to the ScratchPool?
1320 kes Apply Eric's media patch that collects read/write media
1321 times as well as byte counts. This patch requires a
1322 simultaneous upgrade of the DIR and SD. Note, there
1323 should be some way to turn off timing. I'm not sure
1324 times are in Bacula units.
1325 kes Apply Eric's batch-insert patch.
1327 kes Update projects list.
1329 kes Implement Include/Exclude file lists in FD as dlists using
1330 the new dlistString class. This permits efficiently having
1331 large include/exclude lists and completes project Item 25.
1332 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1333 console is authorized to cancel the job. This fixes bug
1335 kes Modify SD so that the VolCatJobs medium record is updated
1336 at the beginning of a Job rather than the end. This
1337 fixes bug #775 where exceeding MaxVolJobs caused jobs
1339 kes Added a mutex around getting and setting Volume information
1340 so that multiple simultaneous jobs will single thread.
1342 Switch to using Subversion
1343 kes Remove src/pygtk-console/ from configure
1345 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1346 plus the entrypoints.
1347 kes Apply patch supplied that corrects debug print
1348 in canceling jobs for max run time. Supplied as
1349 part of bug #621, which was previously fixed.
1351 kes Test on job_canceled() and sd_msg_thread_done inside
1352 loop starting the message thread to avoid a race condition.
1354 kes Remove rl_catch_signal from console.c as it conflicted
1355 with the header definition. Fixes bug #765.
1356 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1358 kes Clarify some stored/acquire messages to indicate if the
1359 problem is with read or append.
1361 kes Fix memory leak with storage ids in cats/sql_get.c
1362 kes Terminate watchdog earlier to avoid reference to released
1363 memory -- reported by Jason Austin.
1364 kes Move closing the database from jobq.c to the director daemon
1365 termination routine. This fixes memory leaks for shadow jobs
1366 (i.e. migration jobs).
1367 kes Free up the unique jobid chain items in migrate.c. This fixes
1368 a memory leak problem.
1369 kes Convert some ugly looking for statements to use foreach_alist
1370 in findlib/find.c. This will facilitate converting the structures
1371 to use dlist (for large include/exclude lists).
1372 kes Fix a bug in the btree.c and btree.h routines, then rename them
1373 rblist and add them to be built in src/lib. Include some new
1374 methods written by Rudolf Cejka that make the code more readable
1375 (hides some of the ugly casting).
1376 kes Add set_next() and set_prev() methods which make the code much more
1377 readable. Also add a new dlistString class that facilitates storing
1378 strings in dlists. To be used in the large include/exclude lists.
1379 kes Make some trivial modifications to lib/tree.h that use rblist
1380 rather than dlist for storing the tree links. This was suggested
1381 by Rudolf Cejka. The result of this is that the restore tree now
1382 uses red-black binary trees rather than simple linked lists. This
1383 should give rather dramatic speed improvements for directories
1384 contining large numbers of directories/files (more than 10000).
1386 kes Fix maxruntime bug #621.
1388 ebl Implement the include JobID in spool file name project.
1389 kes Reorder projects file in order determined by Jan 2007 vote.
1390 kes Implement item #12 on project list -- quick release of FD by
1392 kes Fix open of SQLite3 db where user does not have write permission
1393 so that DIR does not crash. Fixes bug #761.
1395 kes Add back missing @ in Win32 Makefile.
1396 kes Change 'Device not configured to autolabel' from INFO
1398 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1399 which should restart an indefinite # of times.
1400 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1401 other DIR specifications.
1403 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1404 Fix path quoting in SQLite scripts.
1405 Fix problems with SHGetFolderPath.
1407 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1409 kes Fix Job restart on error bug that promotes an Inc to a Full
1410 backup. This should fix bug #755.
1411 kes Add qt-console and first cut of code.
1415 kes Fix Bacula->Documentation link on Win32 to point to index.html
1416 instead of bacula.html. Fixed bug #750.
1417 kes Return JobId in db_get_job_record() when JobId==0. This should
1419 kes Do not release source pointers when restarting a failed job.
1421 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1422 This *should* fix bug #747.
1423 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1426 kes Modify USTORE constructor to set an empty store_source string,
1427 and don't copy the store_source string in a cancel. Hopefully
1428 this will fix Arno's seg fault, bug #744.
1429 kes Add back code to disable conio in configure. Fixes bug #743.
1430 kes Correct the Options scanner in the FD to correctly handle
1431 SHA1 option, which was eating the next option. Reported by
1433 kes Add code to indicate when the SD is spooling, spool wait, and
1434 despooling as requested by Alan Brown.
1436 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob