1 Technical notes on version 2.3
5 kes Rework the reservation system to take into account that the Director
6 might give us a Volume that is different from the current one being
7 used, and to ensure that we don't exceed Maximum Volume Jobs.
8 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
9 fatal error with multiple jobs running'
10 kes Add more debug code in reservation system.
11 kes Implement maxvol-test to check bug #947.
13 kes Add code to handle tray monitor separated from Win32 FD.
14 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
16 kes Add missed return in fixing verify bug -- trunk only.
17 ebl Fix a command parser issue causing a director segfault.
18 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
20 kes Increase the max block size to 4MB fixes bug #957.
21 kes ERABT if user sets min block size > max block size. Fixes bug #956.
22 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
23 is not properly mounted (recognized) during a poll.
24 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
25 Job that has differences reports Verify OK.
26 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
28 ebl Add an option to operate on all pools with update vol parameters.
29 This complete the project 20. Patch from Nigel Stepp.
30 ebl Add history support to bconsole when using readline.
31 Using Ctrl-D to exit doesn't update .bconsole_history
32 kes Modify new volume algorithm to use max MediaId for generating next
33 volume number rather than the count of Volumes. This should essentially
34 eliminate the failure rate if some volumes were deleted. Bug #921.
35 kes Begin implemention of Optimize Job Scheduling.
36 kes Implement restore callback that Dirk and I agreed on for bat
37 restore. This fixes bug #928. Restore of backup of zero files fails.
38 kes Fix SQL Catalog logging which broke with new db_escape_string
41 kes Fix bacula_cats.def for new db_escape_string().
42 kes Increase size of name string when FD making connection to SD.
43 May fix bug #953. FD->SD connection failure.
45 kes Add code to help Dan debug 2drive-incremental-2disk test.
46 kes Add code to try to fix bug #908.
47 kes Add waits to multiple exit detection code to try to force pid
48 file to always be deleted.
49 kes Restore good dev.tar.gz to rescue set appropriate binary property.
51 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
52 trying to switch drives by checking for blocking before unblocking.
54 kes Cancel storage daemon in all cases where FD reports error. This
55 should fix virtually all cases of bug #920.
56 kes Fix db_escape_string() for MySQL which did not compile.
58 kes Fix error message that was clobbered when Dir tells SD it does not
59 have write permission on Volume. This should fix a minor point
60 in bug #942, but not the main problem.
61 kes Add code to cancel job in SD if FD connection fails. This should
63 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
64 dvl Pass jcr and db into db_escape_string() to enable better escaping
66 kes Fix migration code to get correct Volume name with multiple volumes
67 by skipping |. Fixes bug #936.
68 kes Implement patch supplied by Landon to fix bug #944 where using
69 TLS with bconsole uses 99+% of the CPU.
70 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
72 kes Move patches into patches directory.
74 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
77 ebl Using "m" in bconsole will show messages like before,
79 kes Fix bug #935, and probably also bug #903 where files were not
80 restored. MediaId was not properly set in JobMedia record after
83 kes Suppress chown and chmod error messages if the FD is not running
86 kes Apply Martin Simmons' patch that should turn off the new API usage
87 when batch insert is turned off allowing building on older
89 kes Add ./configure search in qwt-qt4 for qwt package
91 kes Bacula is now free of 3rd party GPL copyrighted code!
93 kes Add guid_to_name.c/h which replace idcache.
94 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
96 ebl Detect if new PosgreSQL batch insert API is present.
97 kes Correct incorrect mempool call causing Director crash. Occurs on
98 systems without va_copy().
99 sb Update spec files for 2.2.1 release
101 kes Fix memory pool call in ua_output.c. bug #934.
102 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
103 Add test program to fnmatch.c
105 kes Integrate patch to README.vc8 from
106 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
107 edit it to get it into Unix patch format.
108 kes Implement mkpath.c to replace old FSF makepath.c
110 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
112 Release Version 2.2.1
114 kes Update POTFILES.in
115 kes Cleanup a few underquoted AC_DEFUNs in configure
116 kes Apply patch from Martin Simmons that adds a test for va_copy to
119 kes Fix bug #921 by increasing the number of tries to create a new volume
121 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
122 can be called multiple times. Implement a version for machines
123 without va_copy() that gets a big buffer.
125 kes Integrate more portable zone offset code into bsmtp.c
126 Submitted by Attila Fülöp.
128 kes Fix bad SD->FD return status reported by
129 (James Harper) <james.harper@bendigoit.com.au>
130 ebl Fix a bug in read_close_session which return random status
131 thanks to James Harper
133 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
134 and directory names during restore of single file/directories.
135 kes Add sanity checks to .sql command when string is empty. Hopefully
136 that will resolve Dirks Director crash.
138 kes Apply patch submitted by Martin Simmons that corrects a seg fault
139 in the bsmtp chat subroutine when debug is >= 10.
141 kes Fix Director crash when running bat SQL queries.
142 kes Add David's notes on Item 8: Copy pools.
144 kes Rework projects file to be current and ready for a vote.
145 kes Enhance lex scanner error message.
147 kes Tweak LICENSE file to mention BSD code.
148 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
149 if specified on the ./configure.
150 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
151 This class is intended to allow us to open a second bsock to the
152 Director while in the restore subdialog.
154 kes Fix configure to create bat Makefile before creating dependencies.
155 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
156 kes Add a tooltip to the tray monitor.
157 dvl Set the Director's PID file before dropping privs. This fixes
160 kes Update AUTHORs file
161 kes Increase the default max concurrent jobs to 20 in FD and SD to
162 correspond with the default .conf files.
163 kes Rewrite the Win32 service routines. This eliminates the 3 copies
164 some different, of the same file created by RN when porting the
166 kes Rearrange some of the Win32 directories and the placement of the files
168 kes Set DEVELOPER flag in version.h
170 ========================================================================
171 Release Version 2.2.0
173 kes Apply a second doc patch from Marc.
174 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
175 improves the tips section that discusses how to setup multiple
178 kes Update bat README file.
179 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
180 corrects a typo in the Recycle status check in db_find_next_volume().
181 This will probably fix a number of annoying problems with multiple
183 kes Modify most of dird/msgchan.c to use bsock class calls rather than
184 bnet calls -- no functionality change.
186 kes Modify the Verify output to specify if files are missing on
187 the Volume(s) or disk. Fixes confusion in bug #916.
188 kes When more than one Volume is read in a migration job, the last
189 Volume bytes reported are from the last read volume rather than
190 the last written volume. Fixed. This fixes bug #910.
191 kes Fix display of Recycle flag after update volume=foo recycle=yes.
192 It previously printed New Recyle flag is: no. This fixes bug
195 kes Correct seg fault when switching tape drives during restore.
196 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
197 be used until after 2.2.0 release.
199 kes Remove fnmatch() in SD that permitted wild card specifications.
202 kes Fix %g in filename returned by SQL for browse tree reported by
204 kes Fix configure so that it puts config.out in the cwd rather than
206 kes Attempt to fix the locking problem reported by Eric in bug #906.
207 kes Make berrno class to leave errno unchanged after constructor call.
208 kes Make bnet_server use the heap rather than the stack to allocate
209 its socket fd pointers to avoid a crash at termination. Problem
210 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
212 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
213 and putting it in depkgs-qt along with Qt4.3.
215 kes Rework code in acquire.c that switches drives for reading when
216 the Media Type does not match. This should fix bug #906
218 ebl Fix a director segfault during job setup #907
219 kes Correct seg fault in postgresql when first operation returns no
220 rows. Fixes Dirks File browser problem seg fault with bat.
222 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
223 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
226 kes Implement PopUp YES/NO dialog for bat.
228 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
230 kes Correct RunScript to terminate job in FD on failure.
231 kes Change abort_on_error and AbortJobOnError to fail_on_error
232 and FailJobOnError in RunScripts.
233 kes Minor tweaks of code formating in RunScripts, principally to
234 avoid depassing 80 columns.
236 kes Eliminate one #ifdef Win32 in bsmtp
237 kes Implement grow tool to grow a file for testing very large databases.
238 kes Add big-vol-test to test Bacula seeking with > 5GB.
241 kes Modify find_next_volume() to return all values in Media record.
242 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
246 kes Update Release notes
248 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
249 Warning, in previous beta version, all media get from scratch keep their
252 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
253 This should fix bug #842. Made a note to look at removing the temp
254 files at the end of the install.
255 kes Add ability to mount and unmount a file device providing it is
256 marked as being removable and has the appropriate mount and unmount
257 commands defined in the Device resource. This fixes bug #830.
258 kes When applying a storage override, release all previous storage
259 definitions rather than just prepending the new storage.
260 This should prevent a good deal of confusion.
262 kes Implement ./configure search for qwt libraries.
264 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
265 Win32 FD. This should fix bug #893.
266 kes Remove an unnecessary beep in Win32 init code.
267 kes Update copyright dates in Win32 executable about boxes.
268 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
269 code with a BSD getopt.c and getopt.h.
270 kes Remove sched.h from the Win32 compat directory -- not used.
271 kes Remove the Exit menu item from the Win32 tray monitor. If you really
272 need to shut it down, do it through the services panel or the command
274 kes Remove some inappropriate Bacula FSFE copyrights.
275 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
276 kes Fix regress config non-portable test as pointed out by
277 Florian Heigl <florian.heigl@gmail.com>
278 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
279 as pointed out by Florian Heigl <florian.heigl@gmail.com>
281 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
282 Reported by Frank Sweetser.
286 kes Fix client-only build.
287 kes Integrate client-only fixes for bsys (initgroups) and conio from
288 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
289 kes Make arguments to get_scratch_volume() in same order as other
291 kes Rework the prune_volumes() subroutine so that after purging and
292 no volume found in desired pool, it will check for a scratch
293 volume. This prevents recycling the whole scratch pool.
294 kes Add code to status storage to print boffset_t (largefile support).
296 kes Move qwt (Graphics libarary for Qt4) to depkgs.
297 kes You now need a --with-qwt=<dir> to be able to build bat.
298 kes Update src/win32/cats/bacula_cats.def to include the new
299 db_get_query_dbids() call on Win32.
301 kes Correct a problem when selecting a scratch volume and moving
302 it to another pool that lost some columns.
303 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
304 kes Enhance Autochanger error messages to include Volume and device name.
305 kes Rework prune_volumes() code to take account of InChanger flag,
306 and to handle recycling volumes going to the Scratch pool and
307 current pool because the RecyclePool directive.
308 kes Implement a better and more efficient db_get_query_dbids() to
309 handle creating and passing back a list of DBIds.
313 kes Start work on new more efficient DBId subroutine. First use
314 will be for recycling volume to Scratch inchanger.
315 kes Increase number of JobIds in pruning from 1000 to 10000.
316 This to be replaced by above routine.
317 kes Begin implementation of building Qt4 on Win32.
318 kes Correct typo in fix I added for bad TLS shutdown.
319 kes Pull 2.0.3 patches into patches directory.
320 kes Update Release notes. Include qt-console in line count.
321 kes Update Projects file.
323 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
324 bug in migration code where a job that spanned two volumes
327 kes Implement new BST_DESPOOLING blocked state. Change from locking
328 during despooling in SD to blocking. This means that other threads
329 can work with the device structure, in particular the reservations
330 system while despooling.
332 kes Fix return in reservation message queue that missed clearing
333 the jcr lock (implemented 26Jun07 below).
334 kes Rename a number of dev methods to make locking function names
336 kes Document locking in lock.c. Move lock structures to new file
339 kes Move reservations message lock to lock jcr only this
341 kes Move main SD locking code into lock.c (new file).
342 kes Update Win32 build to include lock.c
346 kes Dirk committed the qwt library code for drawing graphs in bat.
347 kes Tweak install of qwt so that it is integrated with ./configure.
349 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
350 out by Eric (my typo).
351 ebl Fix configure.in to get batch mode enable
352 kes Return correct string from authenticate.cpp in bat when connecting
354 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
355 spurious line drops when using TLS.
356 kes Do not file reparse points when restoring a file that already
359 kes Implement Windows reparse points -- similar to directories, but
360 we do not descend into it. This is a first cut. They seem to
361 be backed up, but restore is not yet tested.
362 kes Remove restore_blocking in tls code when shutting a socket to leave
363 it in blocking mode. Hopefully this will fix the encryption bug
364 reported by Frank Sweetser.
365 kes When opening a file for backup, tell the OS that we are going to
366 read it sequentially -- optimization.
367 kes Change variable names in authenticate_director() to not conflict
368 with member names in bat. Caused great confusion with compiler,
371 kes Queue openssl error messages in case of comm problem.
372 kes Do shutdown() call if socket terminated.
373 kes Remove some duplicated code in tls.c
374 kes Move more of the bsock member variables into private and access
376 kes Add Frank Sweetser's tls-test to the regression suite.
378 kes Add Swedish sv.po file
380 kes Don't print clock skew message in FD if less than 3 seconds diff.
381 kes Add a bit of VSS info to status client.
382 kes Implement a first cut of Vista VSS, using Win2003 code.
386 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
387 loaded tape but uses first drive).
388 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
389 This was indeed a Win32 issue.
391 kes Simplify search of autochanger for in-use Volume.
392 kes Fix exit condition of check for in-use volume. kes Remove
393 inappropriate my_postgresql_free_result() in db_close()
395 kes Fix bad return in FD when encryption signature not found.
396 Probably caused a crash.
397 kes Inhibit missing encryption signature error messages for
398 file types where no signature computed.
399 kes Correct inverted check on autochanger in reservation system.
400 kes Tweak debug code in autochanger reservation.
402 kes Add some additional locking in the cats directory in subroutines
403 that modify packet variables called from batch insert.
404 kes Rework how dcrs are allocated. new_dcr() can now be called
405 with an existing pointer, and it will simply clean it up.
406 This allows the reservation system to test various different
407 devices, and will permit easy device changes.
408 kes A bunch of changes all over to handle new new_dcr() calling
410 kes Work more on the Volume management in the SD. Remember Volumes
411 for tape drives and for autochangers (even virtual disk changers).
412 kes When looking at the Volume list to reserve a drive, handle
413 autochanger names correctly by interating through the changer
414 devices. Also call the Director to see if a Volume is suitable
416 kes Fix some bugs in bscan. Make sure all media records are written.
417 Make sure that valid JobMedia records are written for disk files.
418 Previously they were completely wrong.
419 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
420 that the URLs don't change and so that the developers will all
421 work off the same copy. Rebuild from scrach.
422 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
426 kes Fix seg fault in FD from incorrect digest size.
427 kes Fix argument to non-OpenSSL crypto.c subroutine.
431 kes Remove a few malloc()s from the encryption code.
432 kes Use the class calls to bsock in filed/backup.c and restore.c in
433 place of the old bnet_xxx code.
434 kes Implement code that does an on the fly calculation of the
435 signing digest during restore of encrypted files. It makes
436 a best guess at the algorithm, and if it is not correct, will
437 then revert to the old code which reads the file after it is
439 kes Implement at least one missing crypto stream in stream_to_ascii()
440 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
441 #877 where a reload with bad syntax causes Dir to exit.
443 Cut: 2.1.14 beta (not released)
445 kes Do not free a volume on a tape drive until another volume is
446 mounted and read, or the autochanger unloads the volume.
447 This should help the SD re-use volumes that are already mounted,
448 and should fix bug #886.
449 kes Apply patch from user brettedgar that allows gnome2-console include
450 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
451 kes Apply patch from Lucien Weller that fixes day of week calculation
452 because of DST flag problem. Fixes bug #887.
454 kes Move find_next_appendable_volume() to after acquiring a valid device
455 in reserve.c. This fixes bug #864 -- confirmed by reporter.
457 kes Unable to reproduce bug 872. However added additional testing for
459 kes Bug #874 resolved by documenting SQLite limitations.
460 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
461 kes Bug #881 resolved by removing typo in mtx-changer script.
462 kes Made Frank Sweetser's wiki the official Bacula wiki with his
463 approval. Added a link to the wiki on the web page, and implemented
464 a backup from http://paramount.ind.wpi.edu
466 kes Fix update allfrompool to pass pool name.
468 kes Convert to pure GPL v2 license.
469 kes Fix sscanf problems reported by Peter Buschman that caused
470 a bus error on Solaris.
471 kes Rework (simplify) the select prompt in bat.
472 kes Move get_jobid_from_tid() into lib and create a
474 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
475 should definitely fix the problem of lost error messages in the
477 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
478 kes Eliminate tcpd.h from the project. Enclose the #include from the
479 library with extern C ...
480 kes Add print of signal name when a signal is trapped.
484 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
486 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
487 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
488 makes SQLit3 run 30 times faster, though a bit less safe.
489 kes Implement --with-batch-insert in configure and detection of thread
490 safe libraries. It is on by default, but turned off if no thread
491 safe library (e.g. SQLite 2) is available.
493 kes Fix Bacula PostgreSQL buffer overruns.
494 kes Do better checking for NULL results returned from PostgreSQL;
495 implement retry for failed queries; clear results buffer after
496 failed query. Hopefully this will correct the PostgreSQL failures.
498 kes Implement algorithm to handle only one appendable volume with
499 Prefer Mounted Volumes = no.
500 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
501 returned from a query.
502 kes Make volume lock recursive.
503 kes Implement an additional volume reservation algorithm that
504 starts by considering all reserved volumes then uses the
505 old brute force algorithm of searching the resources to
506 find a suitable device.
507 kes Add new reservations debug code and refine the old code.
508 kes Update the win32/dll/bacula.defs file.
510 kes Tweak reservations algorithm to permit a few more cases, i.e.
511 volume reserved, but on different drive, ...
512 kes Enhance SD status to include Pool and Media Type for drive in a
513 more readable format (a bit longer).
514 kes Fix PostgreSQL double free.
516 kes Minor refactoring of restore decryption code.
517 kes Add code to smartall.c to detect double free of a buffer.
519 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
520 so that bsmtp will create a correct email address (mailbox only).
521 kes Modify 'memory' command so that the buffers are listed as 'In use'
522 to avoid confusion with Orphaned buffers.
523 kes I reworked the OpenSSL include/lib flags to be handled in
524 the standard Bacula way, which should fix bug #863 concerning
525 non-standard OpenSSL libraries.
527 kes Implement Help Browser window for bat.
528 kes Fix reload bug that reset StorageId to zero.
530 kes Fix TLS #ifdefing when TLS turned off.
531 kes Ensure that when labelling a tape with Slot=0 that InChanger
533 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
535 kes Add StartTime to final uar_sel_jobid_temp query so that we can
536 add DISTINCT (required by PostgreSQL).
537 kes Implement BSOCK authenticate_director() method. Eventually will
538 authenicate all daemons.
539 kes Move several more functions into the BSOCK class.
541 kes Add code to tell the OS that we no longer need a cached
542 file that we were reading. In findlib/bfile.c. Also,
543 only cache files that we are reading. Thanks to
544 Tobias Oetiker <tobi@oetiker.ch> for the idea.
545 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
546 kes Implement script to automatically generate cats and dll .def
548 kes Update README.mingw32 to include new .def file generation.
549 kes Correct typo in UTF-8 error message as reported by:
550 jhernandez <julianhernandez@gmail.com>
551 kes Add additional sm_check() code on debug level 1.
552 kes Set default debug level to 1.
553 kes Trap SIGABRT in attempt to get traceback.
555 kes Reduce bat connect timeout from 30 to 15 seconds.
556 kes More restructuring and implementing BSOCK class in place of
558 kes Remove a few unnecessary malloc() tests in crypto code.
559 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
560 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
561 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
563 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
565 kes Fix Verify InitCatalog. The attributes were not pointing to the
566 correct saved location.
567 kes Implement message callback so that GUI is sure to get all
568 daemon messages. Currently displayed in a dialog in bat.
569 kes Ignore SIGUSR2 (Bacula timer) in bat.
570 kes Apply regress patch from bug #859 to allow regress to work
571 with Solaris compiler.
573 kes Begin adding TLS support to bat.
574 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
575 clean up lex.c and make it more readable.
577 kes Move more bnet functions into the BSOCK class.
578 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
579 kes Complete change of berrno strerror() method to bstrerror()
583 kes Cleanup incorrect email addresses in bsmtp.
584 kes Make bat display initial messages rather than discard them.
586 kes First cut of adding .mod to the run command.
587 kes Implement auto display of messages in bat.
588 kes Enhanced preferences to allow all Bacula output to be
591 kes Try to make bsmtp date routines more generic.
592 kes Fixed bug #856 autochanger documentation.
593 kes Rework bsmtp date editing for Win32. This fixes bug #854.
594 kes Add new cats entry point so Win32 builds.
596 kes Attempt to fix bsmtp date editing on OSes without %z editing.
598 kes Do better checking for the MySQL 64 bit libraries looking for both
599 .a and .so libraries.
600 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
601 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
602 kes Require the thread safe version of MySQL during configure. Thanks
603 to Andre Noll for pointing this out.
604 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
605 continuing in migration code.
606 kes Apply implementation of tray-monitor font derived from gnome-console
607 submitted by Andreas Piesk <a.piesk@gmx.net>
609 kes Eliminate important memory loss in SQLite
610 kes Fixed the batch insert MySQL thread specific data that was not
611 being freed. See cats/mysql.c:db_thread_cleanup().
612 kes Fix restore before command.
613 kes Convert old hdr.name to name() in a few places.
614 kes Implement update jobid command.
615 kes Return all time_t dates in db_get_job_record()
616 kes Stop watchdog in SD earlier.
617 kes Put Pool just after Storage in please mount message.
618 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
621 kes Update the po files.
622 kes Fix Verify InitCatalog by making it cache attributes.
624 kes Change name bacula-bat to bat for man 1 page to correspond to
626 kes Check for client and store NULL pointers in status command. This
628 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
629 kes Fix sign extended editing of %p.
630 kes Clean out a little old #ifdefing in cats/mysql.c
632 kes If time diff between DIR and FD is more than 600 seconds convert
633 INFO message to WARNING.
634 kes Implement heap size display in status for all daemons.
635 kes Attempt to fix MySQL db open memory loss (not successfull).
636 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
637 kes Eliminate memory loss in MySQL (possibly other SQLs) during
638 Query. This looks like a MySQL but but by doing extra releases,
639 the memory goes away. This should fix bug #847.
641 kes When backup fails, cancel SD before waiting for sd termination.
642 kes If SD is waiting for FD to connect during cancel, wake up the
644 kes Fix fsf code so that errno is correctly reported.
645 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
647 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
648 so that Bacula doesn't later stumble into a seg fault.
649 kes Use the term Restore Client in the restore Job report.
650 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
651 the original job's FileSetId.
652 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
653 spooling in migration jobs. Not yet tested.
654 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
655 reading conf file from a pipe. However, do it with open_bpipe()
656 rather than popen. Not yet tested.
658 kes Fix an ugly bug where the VolCatBytes were getting updated
660 kes Implement bconsole memory command that prints current memory
661 usage, plus smartalloc dump.
662 kes Clarify some error messages in backup, admin, and migrate.
663 kes Shrink label dialog to smaller size.
664 kes Invert Cancel OK buttons on restore to be OK Cancel.
665 kes More strerror() to bstrerror() conversions.
667 kes Start implementing bstrerror() in place of strerror().
668 kes Stripping path -- seems to work.
670 kes Prevent door and port files from being restored (mostly
672 kes Free an unreleased buffer in compat code.
673 kes Change console Job name from *Console* to -Console- to eliminate
674 Win32 filename problems. Put Win32 path separator when creating
675 Console file. This fixes bug #846.
676 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
678 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
680 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
681 to force Win32 error message.
683 kes First cut strip path. The data should be passed to the FD,
684 but nothing is done with it yet.
685 kes Enhance the digest and signature routines in the crypto
686 library to accept a JCR and to use it to print error messages
687 so that they will go in the Job report rather than the daemon's
689 kes Simplify some of the verify signature code.
690 kes Simplify a few of the alternative returns in the signature
693 ebl Use only POSIX regex instead of GNU regex in breg.c for
694 File relocation. It fix broken freebsd compilation.
695 kes Convert all other Dir files to use new ua class message
697 kes Tentative fix for missing digest signature in bug 807.
698 kes Correct handle problem in new win32_ftruncate routine.
699 kes Convert ua_purge.c and ua_update.c to use new ua class
700 message routines for bat.
702 kes Correct incorrect installation of LICENSE in Win32 installer.
703 kes Display LICENSE at the beginning of the Win32 install.
704 kes Attempt to correct the need for the png files to be installed
706 kes Reapply my bat.conf install script in qt-console. I think I
707 editted bat.pro instead of bat.pro.in and it was lost.
708 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
709 the /var/lock/subsys for subsysdir. Also corrects typos in the
712 kes First cut update job.
713 kes Correct configure to include qmake of src/qt-console directory.
715 kes Make restore job yes/mod/no print in one command so GUI works.
716 kes First cut implementing backup and restore client.
717 kes Correct editing in Verify output that caused a seg fault.
719 kes Insure that bat.conf is not overwritten during installation.
720 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
721 while I was implementing migration in March 2006 !
723 ebl Cleanup file relocation, using char *RegexWhere instead of
724 char *where + bool where_use_regexp
725 kes Update some manpages and add bat manpage.
726 kes Make a first cut at converting bacula.spec.in for bwx-console
728 kes Apply patch from John Goerzen to add hostname as fourth argument
729 to make_catalog_backup script.
730 kes Fix typos I introduced into bsmtp.c
731 kes Make pm_strxxx() routines handle input of NULL pointer. This
732 is to protect from NULL pointers returned from SQL databases.
733 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
734 kes Add more debug to FIFO code -- fix fifo regression test.
736 kes Implement posix_fadvise in FD, and for reading spool files in SD.
737 kes Add thread timer to bnet_connect() to break from OS if wait time
740 kes Update Win32 build to include new files, new symbols, and
742 kes Implement socket level heartbeat (tcp_keepidle)
743 ebl Commit File relocation patch
744 kes Make bat have 'make install' target.
745 kes Warn during install if old gnome-console binary found.
746 kes Warn during install if old wx-console binary found.
747 kes Add -8 option to bsmtp command line to add content type utf-8.
748 Fixes bug #809. (Character coding problem in bsmtp).
749 kes If < is found in target (from, to, cc) then do not enclose the
750 target in < > in bsmtp. Fixes bug #772 (malformed address).
751 kes When printing certain items in dbcheck, stop after 300000.
752 Fixes bug #822. (dbcheck loops).
753 kes Incorrect status in Dir after waiting for mount with poll set.
756 kes Extend idea of Prefer Mounted Volumes to mean a volume about
758 kes Print waiting to reserve a device every 5 mins.
760 kes Don't call close_part in label.c if tape and relabel.
761 kes Don't free volume if busy in close() -- should help with
763 ebl Fix #824 RunScript bug (After script could be execute twice)
764 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
765 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
766 Add a regression script to test RunScript
768 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
771 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
772 deprecated. No additional bugs will be fixed, and they will be dropped
773 in a future release (probably 2.4.0).
774 kes Change name of wx-console to bwx-console to make it more Bacula
776 kes Change the name of gnome-console to bgnome-console to make it
779 kes Some time in March, a Feature Request with patch from Jorj Bauer
780 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
782 The ability for the director to validate a Client (FD) CN against
783 an arbitrary set of patterns rather than the hostname, with
784 A new 'TLS Allowed CN' set of directives which are implemented
785 in the Client resource. Then pattern matching is used in place
786 of hostname matching against the Certificate's CN. As an example, we
787 have certificates which (a) use a local CA, and (b) have a CN of the
789 kes Add new/changed entry points to Win32 build
790 kes Create unaccepted-projects for projects that are not accepted.
791 kes Simplify locking in the reservations system.
792 kes Add more debug code in reservations.
793 kes Make sure error condition on reserving a volume is handled correctly.
794 kes Correct handling of volume_in_use.
795 kes Correct handling of initializing a device.
796 kes Move handling of broadcasting releasing a device into release_device().
797 kes Correct attaching dcr to dev so that it is only done if device
798 is properly initiated.
800 kes Locking debug level tweaks in SD.
801 kes Tweak new Volume code.
803 kes Add exec external-command [wait-seconds] to bconsole. This
804 executes the external-command. Note! normally external-command
805 should be enclosed in double quotes.
806 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
807 it should normally be off in a production system.
809 kes Implement die command for SD so that we can force it to dump.
810 kes Implement SD lock debug code.
811 kes Implement new algorithm for keeping Volume list in SD. It
812 is now owned by the device.
814 kes Implement new code for freeing in use volumes that should
815 resolve if not all, some of the problems of multiple drive
816 tape conflicts described in bug 801.
818 kes Fix gui/bacula-web/images files in svn.
819 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
821 ebl Fix a bug in batch mode (in string escape)
822 kes Correct migration prune SQL typo that crept in in a
825 kes Move bnet_despool() into class in bsock.c
826 kes Modify job report to include director name and Build OS.
827 kes Move drop root privilege and check_catalog() before fork.
828 kes Add update database scripts (version 9 to 10) to updatedb directory.
830 ebl Check size and age of each file after its backup to see if
831 it has changed during backup, if 'checkfilechanges' is set.
832 The FD will do an extra check (stat(2)) after
833 each file backup. mtime, ctime and size are compared with
834 'before backup' information. If time or size mismatch, an
835 error message will be generated. You must upgrade FD to use it.
837 kes Make database name and user configurable
838 --with-db-name=xxx --with-db-user=xxx
839 kes Add back database type to message.c for debugging.
841 kes Implement dir_sql() which issues an SQL query.
842 kes Modify bat medialist to use dir_sql() and do some minor C++
843 formatting as well as eliminating a number of pointers, simplifing
846 kes Fix some of the mtx-changer grep commands for tape label readers.
847 kes Convert a number of bsendmsg into the appropriate send/warning/error
849 kes Suppress the using database message in the .sql command.
850 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
852 kes Add context menu for floating a window.
853 kes Some minor cleanup and name changes in qt-console
854 kes Add doing mt setblk 0 in Win32 mtx-changer.
855 kes Apply Martin's bug fix to move definition of ENODATA for
857 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
860 kes More pruning cleanup.
861 kes Turn on wait_for_drive by default in mtx-changer.
862 kes Turn on Batch insert code by default as it now passes regression.
863 kes Add ./configure --enable-bat to enable building of Bat.
864 No install yet though.
866 kes Implement a new .sql command for bat.
867 kes Implement code to turn off pruning in obtaining the next volume.
868 Pruning is turned off for the status dir command, but turned on
869 for SD requests and for the list nextvolume command.
871 kes Correct Qmsg() that was not updated correctly when committing a
872 previous change (probably the recent TLS patch).
874 kes Write new subroutine is_volume_purged() that explicitly checks
875 if the Volume is purged, and if so marks it as such. This should
876 resolve problems reported about needing to mount twice to recycle
878 kes Rewrite pruning algorithm to do more work in the SQL engine, and
879 to pass a list of JobIds to be deleted to SQL. Also, minimize the
880 amount of duplicated code.
881 kes Do volume pruning only for the Media Type desired (reduces pruning time
882 if multiple Media Types are in the same pool).
883 kes Implement more detailed info in the Job report for the Bacula version
885 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
887 ebl Add bbatch tool to bench database and insert mode.
888 Fix sql quote stuff in batch mode
889 Fix sql stuff for mysql
891 kes Correct problems with am/pm scheduling. Fixes bug #808.
892 kes Implement new prunning code that prunes up to 1000 jobs at
893 the same time. The same technique can be applied to a number
894 of other prune/purge subroutines.
895 kes Add an insanity check when starting a new tape job to ensure
896 that the tape position has not been changed. If so fail the
898 kes Fix Win32 build for dlls to add the folllowing:
899 src/lib/bsock.c -- new file with new entry points
900 src/lib/dlist.c -- new entry points
901 src/cats/sql_create.c -- new entry point
902 src/cats/sql_cmds.c -- new DATA item exported
904 ebl batch mode cleanup bscan-test is ok now.
905 kes Implement SD code to check length of disk volume before appending.
907 kes Correct return status on db_batch... routines.
908 kes Add call to db_write_batch_file_records() to migration code.
909 ebl Fix AfterJob timing
910 kes Move the checking of the database in initializion of the Director
911 to after we drop privileges. This avoids the need for both root
912 and bacula access to the DB.
913 kes Correct a misplaced variable definition in src/filed/backup.c
914 kes Correct how the new batch insert db_create_attributes_record()
915 uses the arguments. Caused a seg fault in bscan.
916 kes Implement lock() and unlock() methods in DEVICE class.
917 Implement block() and set_block(xx) methods in DEVICE class.
918 kes Modify bnet_connect() so that it uses time() to check for the
919 wait time expiring (on some OSes, some system calls may not
921 kes Modify Verify to obtain the previous JobId when it is actually
922 running rather than at schedule time (as it was in 1.38.x).
923 kes Fix src/job.c to handle MaxWaitTime correctly. This should
925 kes When checking pid in pid file, continue running if the pid is
926 the same as ours. This occurs on IRIX after a system crash.
929 kes Extend new GUI API.
930 kes Make the ua structure a class, and implement send_msg(),
931 error_msg(), warning_msg(), and info_msg().
933 kes Apply fix from for building wx-console on the Mac from
935 kes Implement new select mechanism for GUI programs.
936 kes Reorganize initialization of stackedWidgets in bat.
938 kes Add updated nagios plugin supplied by Christian Masopust.
940 kes More bat implementation.
941 kes File migrate bug with Pool Occupancy using mediaid instead
942 of jobids. Fixes bug #795.
943 kes Fix orphaned buffers in filed backup and verify due to
944 crypto buffers not freed during errors. Fixes bug #789.
945 kes Extend new GUI api code to tree commands.
946 kes Ensure that tree and dot commands check console ACLs.
947 kes Permit marking directory with trailing slash.
948 kes Allow 20 console connections (instead of only 10).
950 kes Add smartctl call to bacula-sd.conf as an example of getting
953 kes Modify jobq.c to let simultaneous restore jobs run. This may
954 cause them to fail if they cannot get a drive.
955 kes Add Client Connect Wait to Storage daemon to permit users to
956 modify the time the SD waits for a FD connection.
958 kes Correct virtual changer check which was backwards. This caused
959 volumes to be unloaded into slots already occupied.
961 kes Apply Command ACL filter to JobId list in restore command.
962 kes Correct typeo in var.c patch.
964 kes Don't let Bacula prune File or Job records for the current Job.
965 kes Fix variable substitution pad + inc bug reported (with patch)
968 kes Correct SQLite log table index as reported by Luca Berra.
970 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
972 kes Begin implementing new comm signals for API.
973 kes Fix a few places in lib/message.c where the open fd may
975 kes Continue implementing lib/bsock.c (real class). Make jcr,
976 who, host, and port private. There are new methods to access
977 them for non-class use. This required touching a number of files.
979 kes Add LANG=C to autoconf/randpass so it works with languages other
980 than English. Fixes bug #788.
982 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
984 You will not be able to generate Include/Exclude list any more.
985 It will be fixed soon.
986 If you want to use this, you can apply
987 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
989 kes Restore of sockets created false error messages because Bacula
990 no longer restores sockets, but the code was still trying to
991 set the attributes on a non-existent file. Reported by a user.
992 ebl finish RecyclePool feature
993 Media will takes Pool.RecyclePool
994 when moving from Scratch to a Pool or when user will do
995 update volume=xxx frompool
996 To use it, add RecyclePool = aPool to your Pool resource
999 RecyclePool = Scratch
1003 kes Expand new BSOCK class adding signal() and new BNET signals.
1004 kes Begin enhancing the dot commands adding a new API function
1005 that returns more information and will make it easier
1006 to interface to the Director from a program.
1008 kes Make DEVICE fd private. Its new name is m_fd, and can be
1009 obtained with dev->fd() outside the class. This is the
1010 first of many DEVICE members to be made private.
1011 kes Implement Michael Renner's idea on having a virtual disk
1012 changer. I made some minor modifications (e.g. I did not
1013 implement the Virtual Changer directive, but simply set
1014 the Changer Command to an empty string.
1016 kes Implement a BSOCK send() method that writes the whole record
1017 in a single write() request rather than in two.
1018 ebl add update volume=xxx recyclepool=yyyy
1019 volume takes recyclepool from pool when using update volume=xxx from pool
1021 kes Fix encryption deblocking bug, which caused some restored files
1022 to be truncated. This fixes bug #763.
1023 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1024 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1026 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1027 ebl Use btime_t instead of uint64_t in media patch.
1029 kes Optimize the use of the database a bit in the Status dir command.
1030 Only open it when needed, ensure that if any previous database
1031 was opened, it is closed.
1033 kes Correct VolCatBytes bug from media patch.
1034 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1035 in the case of orphaned records.
1036 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1037 and File records in 300K chunks to be more efficient. This
1038 idea came from Juan Luis Frances (if I remember right).
1039 kes Apply Eric's scratch patch that moves a purged Volume to
1040 the RecyclePool. Question: how is RecyclePool set? what
1041 happens to the ScratchPool?
1042 kes Apply Eric's media patch that collects read/write media
1043 times as well as byte counts. This patch requires a
1044 simultaneous upgrade of the DIR and SD. Note, there
1045 should be some way to turn off timing. I'm not sure
1046 times are in Bacula units.
1047 kes Apply Eric's batch-insert patch.
1049 kes Update projects list.
1051 kes Implement Include/Exclude file lists in FD as dlists using
1052 the new dlistString class. This permits efficiently having
1053 large include/exclude lists and completes project Item 25.
1054 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1055 console is authorized to cancel the job. This fixes bug
1057 kes Modify SD so that the VolCatJobs medium record is updated
1058 at the beginning of a Job rather than the end. This
1059 fixes bug #775 where exceeding MaxVolJobs caused jobs
1061 kes Added a mutex around getting and setting Volume information
1062 so that multiple simultaneous jobs will single thread.
1064 Switch to using Subversion
1065 kes Remove src/pygtk-console/ from configure
1067 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1068 plus the entrypoints.
1069 kes Apply patch supplied that corrects debug print
1070 in canceling jobs for max run time. Supplied as
1071 part of bug #621, which was previously fixed.
1073 kes Test on job_canceled() and sd_msg_thread_done inside
1074 loop starting the message thread to avoid a race condition.
1076 kes Remove rl_catch_signal from console.c as it conflicted
1077 with the header definition. Fixes bug #765.
1078 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1080 kes Clarify some stored/acquire messages to indicate if the
1081 problem is with read or append.
1083 kes Fix memory leak with storage ids in cats/sql_get.c
1084 kes Terminate watchdog earlier to avoid reference to released
1085 memory -- reported by Jason Austin.
1086 kes Move closing the database from jobq.c to the director daemon
1087 termination routine. This fixes memory leaks for shadow jobs
1088 (i.e. migration jobs).
1089 kes Free up the unique jobid chain items in migrate.c. This fixes
1090 a memory leak problem.
1091 kes Convert some ugly looking for statements to use foreach_alist
1092 in findlib/find.c. This will facilitate converting the structures
1093 to use dlist (for large include/exclude lists).
1094 kes Fix a bug in the btree.c and btree.h routines, then rename them
1095 rblist and add them to be built in src/lib. Include some new
1096 methods written by Rudolf Cejka that make the code more readable
1097 (hides some of the ugly casting).
1098 kes Add set_next() and set_prev() methods which make the code much more
1099 readable. Also add a new dlistString class that facilitates storing
1100 strings in dlists. To be used in the large include/exclude lists.
1101 kes Make some trivial modifications to lib/tree.h that use rblist
1102 rather than dlist for storing the tree links. This was suggested
1103 by Rudolf Cejka. The result of this is that the restore tree now
1104 uses red-black binary trees rather than simple linked lists. This
1105 should give rather dramatic speed improvements for directories
1106 contining large numbers of directories/files (more than 10000).
1108 kes Fix maxruntime bug #621.
1110 ebl Implement the include JobID in spool file name project.
1111 kes Reorder projects file in order determined by Jan 2007 vote.
1112 kes Implement item #12 on project list -- quick release of FD by
1114 kes Fix open of SQLite3 db where user does not have write permission
1115 so that DIR does not crash. Fixes bug #761.
1117 kes Add back missing @ in Win32 Makefile.
1118 kes Change 'Device not configured to autolabel' from INFO
1120 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1121 which should restart an indefinite # of times.
1122 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1123 other DIR specifications.
1125 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1126 Fix path quoting in SQLite scripts.
1127 Fix problems with SHGetFolderPath.
1129 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1131 kes Fix Job restart on error bug that promotes an Inc to a Full
1132 backup. This should fix bug #755.
1133 kes Add qt-console and first cut of code.
1137 kes Fix Bacula->Documentation link on Win32 to point to index.html
1138 instead of bacula.html. Fixed bug #750.
1139 kes Return JobId in db_get_job_record() when JobId==0. This should
1141 kes Do not release source pointers when restarting a failed job.
1143 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1144 This *should* fix bug #747.
1145 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1148 kes Modify USTORE constructor to set an empty store_source string,
1149 and don't copy the store_source string in a cancel. Hopefully
1150 this will fix Arno's seg fault, bug #744.
1151 kes Add back code to disable conio in configure. Fixes bug #743.
1152 kes Correct the Options scanner in the FD to correctly handle
1153 SHA1 option, which was eating the next option. Reported by
1155 kes Add code to indicate when the SD is spooling, spool wait, and
1156 despooling as requested by Alan Brown.
1158 Version 2.0.0 released: 4 January 2007