1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
29 that a job may run, counted from when the job was scheduled.
30 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
31 a job may block waiting for a resource, counted from when the job starts
32 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
33 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
34 that implements multiple commands per line in the console when using
35 readline. Modify the default to use a semicolon as the command separator.
37 ebl Fix SQL query in migration code.
38 ebl Make accurate mode with hash disk pass regression tests
40 ebl Implement first cut of accurate backup with hash disk.
42 kes Force unload of volume when wrong volume mounted in SD.
44 kes Fix bat seg fault at termination.
45 kes Add Bacula generated version to bat about box.
48 kes Experiment with allowing multiple read jobs.
49 kes Move final volume swapping code to DCR method and
50 call it from acquire_for_read().
51 kes When wrong volume is mounted during read, unload_autochanger.
53 kes Integrate the libdbi changes from Joao Henrique Freitas
55 kes Stop searching for Volumes in SD askdir if DIR returns the
56 same volume name twice in a row.
57 kes Close bat console windows first to eliminate error message
60 kes Tweak the swap Volume from one drive to another code so that
62 kes Resolve several problems with recycling that broke the new
63 code (these problems are in 2.2.9 as well).
64 kes Remove the volume lock when calling the sysop code.
65 kes Don't mark a reserved volume with no writers as unused otherwise
68 kes Rework class structures for VOLRES, DCR, and DEVICE to make
69 the method names a bit more logical, and for more logically
70 handling the responsibilities.
72 kes Remove redundant code in terminating the scheduler that just
73 causes a seg fault in many cases.
74 kes Cleanup releasing a volume and make it a DCR method.
75 kes Improve algorithm for detecting pre-reserved volume and
78 kes Tweak volume swapping code so it works.
79 kes Correct name overloading in mount.c
80 kes Replace released flag in VOLRES with reserved and add access
81 methods for the VOLRES class.
82 kes Prevent volume from being released while being swapped.
83 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
85 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
87 kes Refactor parts of stored/mount.c
89 ebl Add sanity checks for VolWriteTime and VolReadTime
90 ebl Take care of bad clock changes while computing VolWriteTime
91 and VolReadTime. This should fix or limit #1066
92 kes Correct error string numbers in dird/catreq.c
93 kes Restructure reserving, acquiring, and mounting volumes. Calls to
94 autochanger are deferred for mount.c -- simplifes the code.
96 kes Do not prune any running job. It just fails the job.
97 kes Lock the volumes when changing dev->reserved_device and marking
98 the volume unused otherwise the device can get reserved by
99 another job before the volume is released, thus blocking it.
101 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
102 kes Fix bug #1063, reuse of freed ptr in list nextvol.
103 kes Release regex compile buffer in filed/job.c
104 kes Add proper type of const char in sql_create.c
105 kes Turn off debug in daemon termination routines
106 kes Move free_volume_list() before devices are freed in stored.c
107 kes Fix reference to uninitalized stack variables in bregex.c.
108 This should correct bug #1067.
110 kes Fix possible seg fault in SD when freeing a volume entry.
112 kes Implement unload_dev() before swap device.
113 ebl Add statistics prunning with option and menu
114 kes Separate unload_dev() from unload_other_device() in autochanger.c
116 kes Apply patch from bug #1069 that corrects spurious error messages
117 when ACLs enabled on SGI but no ACL exists.
118 ebl Fix small segfault in bacula-sd when debug level is 500
119 kes Modify run_program() and run_program_full_output() to use
120 call by reference for the results string. This corrects a long
121 standing problem where the address of the string may be changed
122 in the subroutine but not in the calling program.
124 kes Re-enable code to remember last volume mounted on a non-tape
126 kes Add patch supplied in bug #1068 that fixes a SD crash when using
127 a Virtual autochanger.
128 kes Generate correct JobMedia records during spooling/despooling when
129 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
130 <tih@hamartun.priv.no> for excellent analysis and testing.
132 kes Tweak hash algorithm for htable using Martin Simmons idea
133 for doing a circular shift.
134 kes Remember what volume is in VTLs (previously turned off for
136 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
137 pointed out some problems in creating JobMedia records during
138 spooling with concurrent jobs. Fix the problem by updating the
139 start file position before despooling and generate a jobmedia
140 record at the end of despooling.
142 kes Fix handling of JobMedia records during spooling and when a
143 Volume is changed without actually writing data to the Volume.
145 kes Rework certain SD locking based on gdb tracebacks of deadlocks
146 sent by Eric. This code now uses only the volume_lock() rather
147 than the reservations lock when at EOM and acquiring a new
149 kes Ensure only one exit point in several subroutines.
151 kes Implement bsock code to permit locking. Use the new code in Verify
152 in the FD to prevent the heartbeat thread from disrupting the Verify
153 data sent to the Dir.
154 kes Modify SD locking to eliminate locking the reservations system from
155 outside the system. Use the volume lock when getting media data
156 and reserving a new volume at end of media.
157 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
158 when SD starts are not locked into place.
160 kes Fix error compiling runscript code on 64 bit machines.
161 kes Tweak Win32 mount point code.
162 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
163 cleared giving bad file estimate).
164 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
167 kes Keep Schedule run lists in order as suggested by
170 kes Implement autostart scripts for Debian.
171 ebl Implement upgrade catalog scripts.
173 ebl Apply jobstat patch for long term statistics. Have to implement
174 purge stats command and upgrade scripts.
175 kes Fix mtx-changer.in for broken Debian mt program.
177 kes Fix large number of JobMedia records reported by Eric Bollengier.
179 kes Apply doc fix from bug #1062.
180 kes Resolve crash and improper restore wx-console Win32 restore
181 GUI. Fixes bug #1065.
182 kes Update Win32 wxWidgets to latest version.
183 kes Attempt to do correct handling of Win32 mount points. Should
185 kes Fix Win32 FD backup/restore memory leak due to improper termination
186 of BackupRead/Write. This fixes bug# 1038.
188 ebl Reduce memory usage for accurate backup, working only with ctime
189 and mtime. (not all Lstat field)
190 About 40MB for my linux system (400.000 files)
192 kes Add dcr->reserved_volume flag that allows us to release a volume
193 even if it is not vol->released. This allows maxvol2 to work when
194 Volumes expire and we are already writing to the device (i.e. a
195 volume is pulled out from under us by another job terminating after
196 we reserve the drive).
198 ebl Permit multiple command/console per runscript definition.
199 RunScript { command = /bin/true ; command = /bin/false ... }
200 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
201 (restart an application) just after the VSS snapshot on windows.
202 kes Don't zap dcr values during release_volume() as they might
203 have the next Volume to be mounted.
204 kes Fix AIX prototype.
206 kes Second cut of drive switching during backup.
209 kes Update Win32 version of wxWidgets to most recent version.
210 kes Tweak Copy job details.
211 kes Rework dir_find_next_appendable_volume to make a bit more effort
212 to find a suitable volume before giving up.
214 kes Make ask_sysop_to_create... to return if waken from wait.
215 This helps get out of blocked conditions.
216 kes Experimental implementation of switch_device in reservations.
217 kes Implement FD version to allow easier protocol changes.
218 kes Add Plugin Options string -- not yet passed to FD.
219 kes Implement PluginOptions ACL.
221 kes Attempt to correct problems with restores with autochangers and
222 use counts going negative
223 kes Rework SD status command and implement API for bat. Implements
224 header, runing waitreservation, devices, volumes, spooling,
225 and terminated status keywords.
226 .status storage=xxx <keyword>
227 kes Clarify TLS error message by adding double quotes around name.
228 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
229 kes Pass jcr to tls routines so debug messages can be handled better.
230 kes Rework jobq resource allocation code, and possibly fix a bug
231 that caused reference counts to get out of sync.
233 kes Rename fd/dir plugin to use Bacula standard underscore.
234 kes Plugin work -- bring dir up to fd level.
235 kes Start implementation of VTL code
236 kes Fix Win32 build after adding new cats subroutine.
238 kes First cut at Duplicate Job implementation.
240 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
241 kes Start PluginOptions string, and refactor a bit of ua_run.c
242 ebl Apply Allan patch that permit to reset recyclepool.
244 kes Test patch -- possible fix or improvement for bug #1053
245 kes Refactor FD and SD status commands to permit new API code in
246 SD, and to fix Win32 build.
247 kes Win32 build is now working.
249 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
250 some ideas in patch from Scott Bailey.
251 kes Begin implementation of duplicate Job control.
252 kes Fix some of Win32 build after recent additions.
253 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
254 which causes the FD to detect whether or not the OS has the
255 honor no dump bit (*BSD systems), and if so, to skip backing up
256 any file with this bit set. The feature is enabled by setting
257 'honor no dump flag = yes' in the Options section of a FileSet.
259 kes Correct po warning message with datarootdir
260 kes Implement more code in dird.c to put configuration parsing in
261 a class rather than use globals.
262 kes Restructure SD status command for implementation of bat API
265 kes Suppress incorrect 'Will not descend from x into y' messages.
266 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
267 daemon globals used by parser.
268 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
270 kes Fix free of plugin_list when none exists.
272 ebl Apply accurate project patch.
274 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
275 on non-mempool object)
276 kes First cut of converting FD .status to work with bat API.
278 .status client=XXX header
279 .status client=XXX running
280 .status client=XXX terminated
281 kes Implement first cut of Copy Job.
282 kes Implement Catalog in Pool resource. It overrides catalog specified
283 in the Client resource.
285 kes Apply patch (with some difficulties) from Joao Henrique Freitas
286 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
288 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
289 ftruncate() actually works. In the case of some (cheap) NAS devices,
290 it does not, and so recycling NAS Volumes does not work. The code
291 simply unlink()s the file, then recreates it. This fixes bug #1011.
293 kes First incomplete cut of big malloc blocks for htable.
294 kes Tweak plugin code.
296 kes Plugin debug code + tweak a couple bat dialog layouts
298 kes Fix creating first JobMedia record during Migration to include
299 proper index. This caused slow restores of migrated jobs.
300 kes Temp fix to plugin name file_index.
301 kes Bacula backed up and restored a MySQL database.
303 kes Implement plugin restore.
304 kes Implement parsing of db_driver to give db_type index.
306 kes First cut of plugin restore code.
307 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
308 and do not strip paths on symbolic links.
309 kes Set catalog backup database and user name from values specified on
310 the ./configure line.
311 ebl Fix #1031 about wrong pool source information in job report.
314 kes Remove a redundant jcr argument to find_files, match_files, and
316 kes Implement '.status dir header|scheduled|running|terminated' that
317 prints the requested status section. With the exception of the
318 header, the other reports have fields separated by tabs (\t).
320 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
321 a resource embedded run command to find a since time if no explicit
322 since time was supplied on the command line.
323 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
324 that updates the state file at job termination time in addition to
325 when the daemon terminates.
327 kes First version where a plugin did a backup.
328 bpipe-fd.so created a backup file, wrote a test
329 string to it, and Bacua could restore this fabricated file.
331 kes Implement DB Driver = string for the DBI driver.
332 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
333 kes First cut of code for loading Win32 plugin dlls. Implement
334 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
335 and implement a dlfcn.h file based on opengroup's definitions of
338 kes First cut plugin directives.
340 kes Apply patch from bug #1049 to prevent stripping the path on a
342 kes Attempt to fix bug #1047 where stripping a path corrupts the
343 heap. Waiting for feedback.
344 kes Correct the Mount message not to suggest labeling a new tape
345 when doing a restore. Submitted by email by John Stoffel.
346 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
347 FD by using casting. Reported in bug #1042.
349 kes A bit of crypto cleanup. More later.
351 Release Version 2.2.8
353 kes Apply patch from Martin to correct bug #1040, bscan sets existing
355 kes Fixed important spelling error in doc -- bug #1045.
357 ebl Fix bextract to be able to extract non-portable Win32 data to
359 kes Move initialization of read/write res lock earlier in the code.
360 This fixes the crash with a null conf file. This fixes bug
362 kes Redefine CURES in lib/parse_conf to be URES and move it all
363 into lib/parse_conf.c -- this responds to bug #1042, but does
364 not fix it. The fix is not to compile with FORTIFY_SOURCE.
365 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
366 the trunk SVN. I don't think this was reported as a bug.
368 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
370 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
372 kes Add DataDespooling and DataCommitting status (committing is
373 the last despooling).
374 kes Finish implementation of new reservations code noted below.
376 kes Fix bsnprintf for float point numbers. I broke recently when
377 parameterizing some variables. This fixes bug #1036.
378 kes Undo recent reservations changes ... will apply them later
379 when they work better.
381 ebl Fixes #1034 which cause mysql to hang the connection after 8h
382 ebl Change default statistics target of filename.name and path.path
383 fields for PostgreSQL. This speeds lookup by indexes. Thanks
385 kes A few more tweaks to new reservation code. Make sure to clear
386 vol released flag when retaking volume. When reading label and
387 label is bad mark volume unused. When recycling, mark volume
388 unused so it can be renamed.
390 kes Fix reserve_volume() so it doesn't release a volume in use
391 (i.e. a volume entry not marked released). This should be
392 the last part needed to fix bug #1018.
394 kes Move Heartbeat documentation from Job to Director resource.
395 This fixes bug #1033.
397 kes Fix existing switch drive SD code to call autochanger to release
398 any old volume. This must be done to keep the autochanger from
399 releasing subsequently newly reserved volumes in doing a close().
400 This should fix bug #1018.
401 kes Fail if attempting to get console input in batch mode. This
402 should help fail RunScript console commands that are incomplete.
403 kes First cut implementing switch_drive() in SD (not actually called).
405 kes Implement first cut running console commands in a RunScript.
407 ebl Fixes bug #1028 where 'Selection Type' option was not usable
409 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
412 Release Version 2.2.7
414 kes Add new free_tls() entry point so that Win32 builds.
415 kes Fix compile warning in src/lib/util.c
416 kes Fix entry point for edit_job_codes() so that Win32 builds.
417 kes Fix seg fault Frank Sweetser reports in regression testing
418 on his systems. The problem was that the original author of
419 bsnprintf.c did not take into account the side effects of
420 using ++x in the argument to a #define.
421 kes Make SD protocol backward compatible with version 2.2.x.
423 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
424 because Bacula no longer restores sockets.
425 ebl Always use ignorecase fileset option on win32 FD.
427 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
428 that implements double quoting include names in conf files,
429 and also allows piping input by having the first character
430 be a vertical bar (|).
431 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
432 that implement %f in RunScripts to pass the FileSet name.
433 kes Skip leading | when lex input comes from a pipe as suggested
434 by Michael Stapelberg <michael@stapelberg.de>.
436 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
437 Nerijus Baliunas <nerijus@users.sourceforge.net>
439 kes Implement Plugin Directory and plugin events.
441 kes Implement a security enhancement: TLS authentication but no
442 encryption. Enabled by setting 'TLS Authentication = yes'.
443 Note when this is on, TLS encryption is turned OFF!
445 kes This patch corrects a problem where the maximum concurrent storage
446 jobs counter gets out of sync during restore jobs causing jobs to
447 'wait on max Storage jobs'. This patch fixes bug #1009.
449 kes This patch fixes bcopy so that it produces correct Volumes.
451 kes This patch eliminates spurious output to the console during a VerifyVolume
452 job that contains encrypted data. It fixes bug #1024.
454 kes This patch prevents the 'status dir' command from trying to use a scratch
455 volume and possibly moving it from one pool to another. This patch fixes
458 kes Add new include to postgresql.c suggested by Marc Cousins so
459 that it compiles correctly with pgre version 8.3.
461 kes Fix --archivedir addition to configure. Replace it with
462 --with-archivedir in configure.in This fixes the regression
464 kes This patch fixes bug #1012 where the job is canceled because
465 of Max Run Time exceeded when the job has not yet started.
467 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
468 one 'part' to write. Instead of each part being stored on disk,
469 written to DVD, then deleted from disk, all parts are written to disk,
470 and only the last is written and deleted from disk.
471 kes This patch fixes the status command to include the formating string for
472 JS_AttrInsterting. It fixes bug #1021.
473 kes This patch should fix the Mac OS X build problem on the latest
474 Darwin, where sys/types.h was not included correctly (apparently
475 due to a change in the Mac headers). The solution was to explicitly
476 ensure that it is defined for the ./configure.
477 This patch also has a rebuild of configure that includes the Debian
478 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
479 kes This patch should ensure that queued messages to the console are
480 displayed as soon as possible. It should fix bug 1007, but has been
481 reported not to work.
483 kes This patch fixes the infinite loop when trying to increase the
484 maximum number of volumes in a Pool during the add command.
485 This patch fixes bug #1008.
487 Release Version 2.2.6
489 db Remove extra data on estimate command in joblist for bat.
491 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
492 really change anything, but is the beginning of doing it *right*.
493 To do it completely right the LastWritten date must be passed to
494 the SD, but it is not yet done.
495 kes Minor tweaks to some bat restore SQL.
496 kes This patch fixes bug #1003 where putting the message output from
497 a Verify job into the catalog results in a recursive loop. The problem
498 seems to show up only with postgresql (to be verified).
499 kes Correct %x to %p in postgresql debug statement.
501 kes Fix bug #942 where lots of emails where generated when the heartbeat
502 interval was low and Bacula wanted a different tape from the one in
505 ebl Add new SD despooling attributes and Dir inserting attributes
506 job status codes in the catalog (Status table).
508 ebl Use qmake-qt4 instead of qmake when available (debian system).
510 kes Add a security warning to src/cats/make_catalog_backup.in indicating
511 that passing the password via the command line (arg 3) is insecure.
512 This responds to bug #990 (it doesn't fix it).
514 kes Set default debug_level to zero. This corrects bugs #991 and #993.
515 kes Fix a crash in bat when it cannot connect to the Director for example
516 if the Director is not running.
517 kes Remove redundant INDEX (JobId) from File table in the trunk.
519 kes Make explicit exception to GPL in LICENSE to permit linking
520 the Win32 FD with Microsoft VSS code.
521 kes Apply the Solaris package patch from
522 Masopust, Christian <christian.masopust@siemens.com>
523 kes Apply the patch to optionally add a timestamp in the debug output
524 submitted by Mariusz Czulada <manieq@wp.eu>.
526 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
527 backend (sql_strerror). Fixes bug #989
529 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
530 It applied with no problems.
531 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
533 kes Redirect stderror to stdin on mt status command in mtx-changer.in
534 since the status is returned on stderr on Solaris.
535 kes Activate Close button on tray-monitor window. This fixes
537 kes Check for NULL item in parse_conf.c before calling it. In the
538 case of Device, there is no item and this caused a seg fault when
539 Device appears in the conf file.
540 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
541 avoids pulling in config.h multiple times in some new code.
543 kes Fix spurious warning message printed when creating a volume with
544 a LabelFormat. This fixes bug #976.
546 Release Version 2.2.5
548 kes Add JobId in place of Job name in all the Jmsg() output.
549 kes Correct the APP_DESC for the Win32 storage service (remove an e).
551 kes Make maxvol-test and new more strict maxvol2-test work.
552 kes Print JobId in all Jmsg() job output.
554 kes Add new SD despooling attributes and Dir inserting attributes
555 job status codes. This fixes bug 961.
556 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
558 kes Fix doc issue. This fixes bug #963.
559 kes Fix listing performance problems in bat. Pointed out by
561 kes Remove old debug code.
562 kes Fix bat code that tests for Win32. This should fix bug #968
563 kes Query 5 list wrong Vol after migration. This fixes bug #960
565 ebl Fix #969 where user can't change Replace option in restore menu.
567 kes Save jcr in thread specific data (tsd) for each thread.
568 kes Make Dmsg() print JobId as -%u.
569 kes Make Jmsg, Emsg, and others automatically pickup the jobid
570 for the thread if it exists.
571 kes Remove old reservation debug jid code.
572 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
573 ebl Add an option that permit to specify spool size in job
574 definition. (Applying patches/testing/spoolsize_per_job.patch).
575 You must upgrade SD and DIR at the same time.
576 dvl Add new configuration item --archivedir
577 dvl Adjust regression tests to use tmp not /tmp. This will allow
578 multiple concurrent runs of the regression tests.
580 kes Fix race condition that drops final block written to volume.
581 This happens in rare cases with multiple simultaneous jobs
582 when the Volume fills. This fixes bug #964. May be related
583 to bug #935 and possibly #903.
584 kes Eliminate more strerror() and replace with bstrerror().
585 kes Remove BSD getopt and replace with unrestricted IBM version.
586 kes Fix Win32 build for changed calling sequences.
587 kes More tweaks to the mount volume routines to get everything
588 right. Changed variable name from find to have_vol, which is
589 much easier to understand.
590 kes Enhance btimer debug code.
592 kes Fix FD->SD authorization failure, which was due to spurious
593 wakeups from a pthread_cond_timedwait(). Simply check the
594 predicate before continuing. This fixes bug #953.
595 kes Add const char where needed (more to do). Remove temp debug code.
597 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
598 kes Don't overwrite error message in check_tables_version.
600 kes Unlock batch insert tables with same calls used elsewhere.
601 kes Allow starting 59 jobs a second.
602 kes Make SD session key more random.
603 kes Add retry for SQLite opening db if it fails. Probably helps
605 kes Suppress extra error messages during batch insert failure.
607 kes Add jcr to timer packets so if killed message can be sent to job.
608 kes Add JobId to all Dmsg() output.
609 kes Put some FD auth code on dbglvl rather than fixed.
610 kes Return insert attributes error message in db msg buffer to avoid
611 false error messages. Helps fix bug #966.
612 kes Separate batch init error messages. Probably helps fix bug #966.
613 kes Make SD code that contructs attribute insert check string lengths
615 kes If Dir gets an error during inserting attributes, cancel SD.
616 This reduces unnecessary error messages.
618 kes Correct search boolean for getting Volume info
619 ebl Cleanup batch insert code. Probably fixes bug #965.
620 kes Back out one small change to the reservation system (reserving a volume).
621 kes Rework how a Volume is mounted. It is now much more intelligent and
622 will always attempt to use any mounted volume if possible and reduces
623 calls to the Director asking about volumes.
625 kes Turn off some code when batch insert not enabled.
626 kes Edit FD name in connect error messages.
627 kes Rework the reservation system to take into account that the Director
628 might give us a Volume that is different from the current one being
629 used, and to ensure that we don't exceed Maximum Volume Jobs.
630 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
631 fatal error with multiple jobs running'
632 kes Add more debug code in reservation system.
633 kes Implement maxvol-test to check bug #947.
635 kes Add code to handle tray monitor separated from Win32 FD.
636 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
638 kes Add missed return in fixing verify bug -- trunk only.
639 ebl Fix a command parser issue causing a director segfault.
640 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
642 kes Increase the max block size to 4MB fixes bug #957.
643 kes ERABT if user sets min block size > max block size. Fixes bug #956.
644 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
645 is not properly mounted (recognized) during a poll.
646 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
647 Job that has differences reports Verify OK.
648 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
650 ebl Add an option to operate on all pools with update vol parameters.
651 This complete the project 20. Patch from Nigel Stepp.
652 ebl Add history support to bconsole when using readline.
653 Using Ctrl-D to exit doesn't update .bconsole_history
654 kes Modify new volume algorithm to use max MediaId for generating next
655 volume number rather than the count of Volumes. This should essentially
656 eliminate the failure rate if some volumes were deleted. Bug #921.
657 kes Begin implemention of Optimize Job Scheduling.
658 kes Implement restore callback that Dirk and I agreed on for bat
659 restore. This fixes bug #928. Restore of backup of zero files fails.
660 kes Fix SQL Catalog logging which broke with new db_escape_string
663 Release Version 2.2.4
665 kes Fix bacula_cats.def for new db_escape_string().
666 kes Increase size of name string when FD making connection to SD.
667 May fix bug #953. FD->SD connection failure.
669 kes Add code to help Dan debug 2drive-incremental-2disk test.
670 kes Add code to try to fix bug #908.
671 kes Add waits to multiple exit detection code to try to force pid
672 file to always be deleted.
673 kes Restore good dev.tar.gz to rescue set appropriate binary property.
675 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
676 trying to switch drives by checking for blocking before unblocking.
678 kes Cancel storage daemon in all cases where FD reports error. This
679 should fix virtually all cases of bug #920.
680 kes Fix db_escape_string() for MySQL which did not compile.
682 kes Fix error message that was clobbered when Dir tells SD it does not
683 have write permission on Volume. This should fix a minor point
684 in bug #942, but not the main problem.
685 kes Add code to cancel job in SD if FD connection fails. This should
687 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
688 dvl Pass jcr and db into db_escape_string() to enable better escaping
690 kes Fix migration code to get correct Volume name with multiple volumes
691 by skipping |. Fixes bug #936.
692 kes Implement patch supplied by Landon to fix bug #944 where using
693 TLS with bconsole uses 99+% of the CPU.
694 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
696 kes Move patches into patches directory.
698 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
701 ebl Using 'm' in bconsole will show messages like before,
702 and not memory usage.
703 kes Fix bug #935, and probably also bug #903 where files were not
704 restored. MediaId was not properly set in JobMedia record after
707 kes Suppress chown and chmod error messages if the FD is not running
710 kes Apply Martin Simmons' patch that should turn off the new API usage
711 when batch insert is turned off allowing building on older
713 kes Add ./configure search in qwt-qt4 for qwt package
715 kes Bacula is now free of 3rd party GPL copyrighted code!
717 kes Add guid_to_name.c/h which replace idcache.
718 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
720 ebl Detect if new PosgreSQL batch insert API is present.
721 kes Correct incorrect mempool call causing Director crash. Occurs on
722 systems without va_copy().
723 sb Update spec files for 2.2.1 release
725 kes Fix memory pool call in ua_output.c. bug #934.
726 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
727 Add test program to fnmatch.c
729 kes Integrate patch to README.vc8 from
730 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
731 edit it to get it into Unix patch format.
732 kes Implement mkpath.c to replace old FSF makepath.c
734 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
736 Release Version 2.2.1
738 kes Update POTFILES.in
739 kes Cleanup a few underquoted AC_DEFUNs in configure
740 kes Apply patch from Martin Simmons that adds a test for va_copy to
743 kes Fix bug #921 by increasing the number of tries to create a new volume
745 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
746 can be called multiple times. Implement a version for machines
747 without va_copy() that gets a big buffer.
749 kes Integrate more portable zone offset code into bsmtp.c
750 Submitted by Attila Fülöp.
752 kes Fix bad SD->FD return status reported by
753 (James Harper) <james.harper@bendigoit.com.au>
754 ebl Fix a bug in read_close_session which return random status
755 thanks to James Harper
757 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
758 and directory names during restore of single file/directories.
759 kes Add sanity checks to .sql command when string is empty. Hopefully
760 that will resolve Dirks Director crash.
762 kes Apply patch submitted by Martin Simmons that corrects a seg fault
763 in the bsmtp chat subroutine when debug is >= 10.
765 kes Fix Director crash when running bat SQL queries.
766 kes Add David's notes on Item 8: Copy pools.
768 kes Rework projects file to be current and ready for a vote.
769 kes Enhance lex scanner error message.
771 kes Tweak LICENSE file to mention BSD code.
772 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
773 if specified on the ./configure.
774 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
775 This class is intended to allow us to open a second bsock to the
776 Director while in the restore subdialog.
778 kes Fix configure to create bat Makefile before creating dependencies.
779 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
780 kes Add a tooltip to the tray monitor.
781 dvl Set the Director's PID file before dropping privs. This fixes
784 kes Update AUTHORs file
785 kes Increase the default max concurrent jobs to 20 in FD and SD to
786 correspond with the default .conf files.
787 kes Rewrite the Win32 service routines. This eliminates the 3 copies
788 some different, of the same file created by RN when porting the
790 kes Rearrange some of the Win32 directories and the placement of the files
792 kes Set DEVELOPER flag in version.h
794 ========================================================================
795 Release Version 2.2.0
797 kes Apply a second doc patch from Marc.
798 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
799 improves the tips section that discusses how to setup multiple
802 kes Update bat README file.
803 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
804 corrects a typo in the Recycle status check in db_find_next_volume().
805 This will probably fix a number of annoying problems with multiple
807 kes Modify most of dird/msgchan.c to use bsock class calls rather than
808 bnet calls -- no functionality change.
810 kes Modify the Verify output to specify if files are missing on
811 the Volume(s) or disk. Fixes confusion in bug #916.
812 kes When more than one Volume is read in a migration job, the last
813 Volume bytes reported are from the last read volume rather than
814 the last written volume. Fixed. This fixes bug #910.
815 kes Fix display of Recycle flag after update volume=foo recycle=yes.
816 It previously printed New Recyle flag is: no. This fixes bug
819 kes Correct seg fault when switching tape drives during restore.
820 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
821 be used until after 2.2.0 release.
823 kes Remove fnmatch() in SD that permitted wild card specifications.
826 kes Fix %g in filename returned by SQL for browse tree reported by
828 kes Fix configure so that it puts config.out in the cwd rather than
830 kes Attempt to fix the locking problem reported by Eric in bug #906.
831 kes Make berrno class to leave errno unchanged after constructor call.
832 kes Make bnet_server use the heap rather than the stack to allocate
833 its socket fd pointers to avoid a crash at termination. Problem
834 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
836 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
837 and putting it in depkgs-qt along with Qt4.3.
839 kes Rework code in acquire.c that switches drives for reading when
840 the Media Type does not match. This should fix bug #906
842 ebl Fix a director segfault during job setup #907
843 kes Correct seg fault in postgresql when first operation returns no
844 rows. Fixes Dirks File browser problem seg fault with bat.
846 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
847 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
850 kes Implement PopUp YES/NO dialog for bat.
852 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
854 kes Correct RunScript to terminate job in FD on failure.
855 kes Change abort_on_error and AbortJobOnError to fail_on_error
856 and FailJobOnError in RunScripts.
857 kes Minor tweaks of code formating in RunScripts, principally to
858 avoid depassing 80 columns.
860 kes Eliminate one #ifdef Win32 in bsmtp
861 kes Implement grow tool to grow a file for testing very large databases.
862 kes Add big-vol-test to test Bacula seeking with > 5GB.
865 kes Modify find_next_volume() to return all values in Media record.
866 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
870 kes Update Release notes
872 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
873 Warning, in previous beta version, all media get from scratch keep their
876 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
877 This should fix bug #842. Made a note to look at removing the temp
878 files at the end of the install.
879 kes Add ability to mount and unmount a file device providing it is
880 marked as being removable and has the appropriate mount and unmount
881 commands defined in the Device resource. This fixes bug #830.
882 kes When applying a storage override, release all previous storage
883 definitions rather than just prepending the new storage.
884 This should prevent a good deal of confusion.
886 kes Implement ./configure search for qwt libraries.
888 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
889 Win32 FD. This should fix bug #893.
890 kes Remove an unnecessary beep in Win32 init code.
891 kes Update copyright dates in Win32 executable about boxes.
892 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
893 code with a BSD getopt.c and getopt.h.
894 kes Remove sched.h from the Win32 compat directory -- not used.
895 kes Remove the Exit menu item from the Win32 tray monitor. If you really
896 need to shut it down, do it through the services panel or the command
898 kes Remove some inappropriate Bacula FSFE copyrights.
899 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
900 kes Fix regress config non-portable test as pointed out by
901 Florian Heigl <florian.heigl@gmail.com>
902 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
903 as pointed out by Florian Heigl <florian.heigl@gmail.com>
905 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
906 Reported by Frank Sweetser.
910 kes Fix client-only build.
911 kes Integrate client-only fixes for bsys (initgroups) and conio from
912 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
913 kes Make arguments to get_scratch_volume() in same order as other
915 kes Rework the prune_volumes() subroutine so that after purging and
916 no volume found in desired pool, it will check for a scratch
917 volume. This prevents recycling the whole scratch pool.
918 kes Add code to status storage to print boffset_t (largefile support).
920 kes Move qwt (Graphics libarary for Qt4) to depkgs.
921 kes You now need a --with-qwt=<dir> to be able to build bat.
922 kes Update src/win32/cats/bacula_cats.def to include the new
923 db_get_query_dbids() call on Win32.
925 kes Correct a problem when selecting a scratch volume and moving
926 it to another pool that lost some columns.
927 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
928 kes Enhance Autochanger error messages to include Volume and device name.
929 kes Rework prune_volumes() code to take account of InChanger flag,
930 and to handle recycling volumes going to the Scratch pool and
931 current pool because the RecyclePool directive.
932 kes Implement a better and more efficient db_get_query_dbids() to
933 handle creating and passing back a list of DBIds.
937 kes Start work on new more efficient DBId subroutine. First use
938 will be for recycling volume to Scratch inchanger.
939 kes Increase number of JobIds in pruning from 1000 to 10000.
940 This to be replaced by above routine.
941 kes Begin implementation of building Qt4 on Win32.
942 kes Correct typo in fix I added for bad TLS shutdown.
943 kes Pull 2.0.3 patches into patches directory.
944 kes Update Release notes. Include qt-console in line count.
945 kes Update Projects file.
947 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
948 bug in migration code where a job that spanned two volumes
951 kes Implement new BST_DESPOOLING blocked state. Change from locking
952 during despooling in SD to blocking. This means that other threads
953 can work with the device structure, in particular the reservations
954 system while despooling.
956 kes Fix return in reservation message queue that missed clearing
957 the jcr lock (implemented 26Jun07 below).
958 kes Rename a number of dev methods to make locking function names
960 kes Document locking in lock.c. Move lock structures to new file
963 kes Move reservations message lock to lock jcr only this
965 kes Move main SD locking code into lock.c (new file).
966 kes Update Win32 build to include lock.c
970 kes Dirk committed the qwt library code for drawing graphs in bat.
971 kes Tweak install of qwt so that it is integrated with ./configure.
973 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
974 out by Eric (my typo).
975 ebl Fix configure.in to get batch mode enable
976 kes Return correct string from authenticate.cpp in bat when connecting
978 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
979 spurious line drops when using TLS.
980 kes Do not file reparse points when restoring a file that already
983 kes Implement Windows reparse points -- similar to directories, but
984 we do not descend into it. This is a first cut. They seem to
985 be backed up, but restore is not yet tested.
986 kes Remove restore_blocking in tls code when shutting a socket to leave
987 it in blocking mode. Hopefully this will fix the encryption bug
988 reported by Frank Sweetser.
989 kes When opening a file for backup, tell the OS that we are going to
990 read it sequentially -- optimization.
991 kes Change variable names in authenticate_director() to not conflict
992 with member names in bat. Caused great confusion with compiler,
995 kes Queue openssl error messages in case of comm problem.
996 kes Do shutdown() call if socket terminated.
997 kes Remove some duplicated code in tls.c
998 kes Move more of the bsock member variables into private and access
1000 kes Add Frank Sweetser's tls-test to the regression suite.
1002 kes Add Swedish sv.po file
1004 kes Don't print clock skew message in FD if less than 3 seconds diff.
1005 kes Add a bit of VSS info to status client.
1006 kes Implement a first cut of Vista VSS, using Win2003 code.
1008 Release: 2.1.20 beta
1010 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1011 loaded tape but uses first drive).
1012 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1013 This was indeed a Win32 issue.
1015 kes Simplify search of autochanger for in-use Volume.
1016 kes Fix exit condition of check for in-use volume. kes Remove
1017 inappropriate my_postgresql_free_result() in db_close()
1019 kes Fix bad return in FD when encryption signature not found.
1020 Probably caused a crash.
1021 kes Inhibit missing encryption signature error messages for
1022 file types where no signature computed.
1023 kes Correct inverted check on autochanger in reservation system.
1024 kes Tweak debug code in autochanger reservation.
1026 kes Add some additional locking in the cats directory in subroutines
1027 that modify packet variables called from batch insert.
1028 kes Rework how dcrs are allocated. new_dcr() can now be called
1029 with an existing pointer, and it will simply clean it up.
1030 This allows the reservation system to test various different
1031 devices, and will permit easy device changes.
1032 kes A bunch of changes all over to handle new new_dcr() calling
1034 kes Work more on the Volume management in the SD. Remember Volumes
1035 for tape drives and for autochangers (even virtual disk changers).
1036 kes When looking at the Volume list to reserve a drive, handle
1037 autochanger names correctly by interating through the changer
1038 devices. Also call the Director to see if a Volume is suitable
1039 for the current job.
1040 kes Fix some bugs in bscan. Make sure all media records are written.
1041 Make sure that valid JobMedia records are written for disk files.
1042 Previously they were completely wrong.
1043 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1044 that the URLs don't change and so that the developers will all
1045 work off the same copy. Rebuild from scrach.
1046 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1048 Release: 2.1.18 beta
1050 kes Fix seg fault in FD from incorrect digest size.
1051 kes Fix argument to non-OpenSSL crypto.c subroutine.
1053 Release: 2.1.16 beta
1055 kes Remove a few malloc()s from the encryption code.
1056 kes Use the class calls to bsock in filed/backup.c and restore.c in
1057 place of the old bnet_xxx code.
1058 kes Implement code that does an on the fly calculation of the
1059 signing digest during restore of encrypted files. It makes
1060 a best guess at the algorithm, and if it is not correct, will
1061 then revert to the old code which reads the file after it is
1063 kes Implement at least one missing crypto stream in stream_to_ascii()
1064 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1065 #877 where a reload with bad syntax causes Dir to exit.
1067 Cut: 2.1.14 beta (not released)
1069 kes Do not free a volume on a tape drive until another volume is
1070 mounted and read, or the autochanger unloads the volume.
1071 This should help the SD re-use volumes that are already mounted,
1072 and should fix bug #886.
1073 kes Apply patch from user brettedgar that allows gnome2-console include
1074 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1075 kes Apply patch from Lucien Weller that fixes day of week calculation
1076 because of DST flag problem. Fixes bug #887.
1078 kes Move find_next_appendable_volume() to after acquiring a valid device
1079 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1081 kes Unable to reproduce bug 872. However added additional testing for
1083 kes Bug #874 resolved by documenting SQLite limitations.
1084 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1085 kes Bug #881 resolved by removing typo in mtx-changer script.
1086 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1087 approval. Added a link to the wiki on the web page, and implemented
1088 a backup from http://paramount.ind.wpi.edu
1090 kes Fix update allfrompool to pass pool name.
1092 kes Convert to pure GPL v2 license.
1093 kes Fix sscanf problems reported by Peter Buschman that caused
1094 a bus error on Solaris.
1095 kes Rework (simplify) the select prompt in bat.
1096 kes Move get_jobid_from_tid() into lib and create a
1098 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1099 should definitely fix the problem of lost error messages in the
1101 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1102 kes Eliminate tcpd.h from the project. Enclose the #include from the
1103 library with extern C ...
1104 kes Add print of signal name when a signal is trapped.
1106 Release: 2.1.12 beta
1108 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1110 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1111 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1112 makes SQLit3 run 30 times faster, though a bit less safe.
1113 kes Implement --with-batch-insert in configure and detection of thread
1114 safe libraries. It is on by default, but turned off if no thread
1115 safe library (e.g. SQLite 2) is available.
1117 kes Fix Bacula PostgreSQL buffer overruns.
1118 kes Do better checking for NULL results returned from PostgreSQL;
1119 implement retry for failed queries; clear results buffer after
1120 failed query. Hopefully this will correct the PostgreSQL failures.
1122 kes Implement algorithm to handle only one appendable volume with
1123 Prefer Mounted Volumes = no.
1124 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1125 returned from a query.
1126 kes Make volume lock recursive.
1127 kes Implement an additional volume reservation algorithm that
1128 starts by considering all reserved volumes then uses the
1129 old brute force algorithm of searching the resources to
1130 find a suitable device.
1131 kes Add new reservations debug code and refine the old code.
1132 kes Update the win32/dll/bacula.defs file.
1134 kes Tweak reservations algorithm to permit a few more cases, i.e.
1135 volume reserved, but on different drive, ...
1136 kes Enhance SD status to include Pool and Media Type for drive in a
1137 more readable format (a bit longer).
1138 kes Fix PostgreSQL double free.
1140 kes Minor refactoring of restore decryption code.
1141 kes Add code to smartall.c to detect double free of a buffer.
1143 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1144 so that bsmtp will create a correct email address (mailbox only).
1145 kes Modify 'memory' command so that the buffers are listed as 'In use'
1146 to avoid confusion with Orphaned buffers.
1147 kes I reworked the OpenSSL include/lib flags to be handled in
1148 the standard Bacula way, which should fix bug #863 concerning
1149 non-standard OpenSSL libraries.
1151 kes Implement Help Browser window for bat.
1152 kes Fix reload bug that reset StorageId to zero.
1154 kes Fix TLS #ifdefing when TLS turned off.
1155 kes Ensure that when labelling a tape with Slot=0 that InChanger
1157 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1159 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1160 add DISTINCT (required by PostgreSQL).
1161 kes Implement BSOCK authenticate_director() method. Eventually will
1162 authenicate all daemons.
1163 kes Move several more functions into the BSOCK class.
1165 kes Add code to tell the OS that we no longer need a cached
1166 file that we were reading. In findlib/bfile.c. Also,
1167 only cache files that we are reading. Thanks to
1168 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1169 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1170 kes Implement script to automatically generate cats and dll .def
1171 files for Win32 dll.
1172 kes Update README.mingw32 to include new .def file generation.
1173 kes Correct typo in UTF-8 error message as reported by:
1174 jhernandez <julianhernandez@gmail.com>
1175 kes Add additional sm_check() code on debug level 1.
1176 kes Set default debug level to 1.
1177 kes Trap SIGABRT in attempt to get traceback.
1179 kes Reduce bat connect timeout from 30 to 15 seconds.
1180 kes More restructuring and implementing BSOCK class in place of
1182 kes Remove a few unnecessary malloc() tests in crypto code.
1183 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1184 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1185 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1187 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1189 kes Fix Verify InitCatalog. The attributes were not pointing to the
1190 correct saved location.
1191 kes Implement message callback so that GUI is sure to get all
1192 daemon messages. Currently displayed in a dialog in bat.
1193 kes Ignore SIGUSR2 (Bacula timer) in bat.
1194 kes Apply regress patch from bug #859 to allow regress to work
1195 with Solaris compiler.
1197 kes Begin adding TLS support to bat.
1198 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1199 clean up lex.c and make it more readable.
1201 kes Move more bnet functions into the BSOCK class.
1202 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1203 kes Complete change of berrno strerror() method to bstrerror()
1205 Release: 2.1.10 beta
1207 kes Cleanup incorrect email addresses in bsmtp.
1208 kes Make bat display initial messages rather than discard them.
1210 kes First cut of adding .mod to the run command.
1211 kes Implement auto display of messages in bat.
1212 kes Enhanced preferences to allow all Bacula output to be
1215 kes Try to make bsmtp date routines more generic.
1216 kes Fixed bug #856 autochanger documentation.
1217 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1218 kes Add new cats entry point so Win32 builds.
1220 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1222 kes Do better checking for the MySQL 64 bit libraries looking for both
1223 .a and .so libraries.
1224 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1225 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1226 kes Require the thread safe version of MySQL during configure. Thanks
1227 to Andre Noll for pointing this out.
1228 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1229 continuing in migration code.
1230 kes Apply implementation of tray-monitor font derived from gnome-console
1231 submitted by Andreas Piesk <a.piesk@gmx.net>
1233 kes Eliminate important memory loss in SQLite
1234 kes Fixed the batch insert MySQL thread specific data that was not
1235 being freed. See cats/mysql.c:db_thread_cleanup().
1236 kes Fix restore before command.
1237 kes Convert old hdr.name to name() in a few places.
1238 kes Implement update jobid command.
1239 kes Return all time_t dates in db_get_job_record()
1240 kes Stop watchdog in SD earlier.
1241 kes Put Pool just after Storage in please mount message.
1242 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1245 kes Update the po files.
1246 kes Fix Verify InitCatalog by making it cache attributes.
1248 kes Change name bacula-bat to bat for man 1 page to correspond to
1250 kes Check for client and store NULL pointers in status command. This
1252 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1253 kes Fix sign extended editing of %p.
1254 kes Clean out a little old #ifdefing in cats/mysql.c
1256 kes If time diff between DIR and FD is more than 600 seconds convert
1257 INFO message to WARNING.
1258 kes Implement heap size display in status for all daemons.
1259 kes Attempt to fix MySQL db open memory loss (not successfull).
1260 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1261 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1262 Query. This looks like a MySQL but but by doing extra releases,
1263 the memory goes away. This should fix bug #847.
1265 kes When backup fails, cancel SD before waiting for sd termination.
1266 kes If SD is waiting for FD to connect during cancel, wake up the
1268 kes Fix fsf code so that errno is correctly reported.
1269 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1271 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1272 so that Bacula doesn't later stumble into a seg fault.
1273 kes Use the term Restore Client in the restore Job report.
1274 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1275 the original job's FileSetId.
1276 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1277 spooling in migration jobs. Not yet tested.
1278 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1279 reading conf file from a pipe. However, do it with open_bpipe()
1280 rather than popen. Not yet tested.
1282 kes Fix an ugly bug where the VolCatBytes were getting updated
1284 kes Implement bconsole memory command that prints current memory
1285 usage, plus smartalloc dump.
1286 kes Clarify some error messages in backup, admin, and migrate.
1287 kes Shrink label dialog to smaller size.
1288 kes Invert Cancel OK buttons on restore to be OK Cancel.
1289 kes More strerror() to bstrerror() conversions.
1291 kes Start implementing bstrerror() in place of strerror().
1292 kes Stripping path -- seems to work.
1294 kes Prevent door and port files from being restored (mostly
1296 kes Free an unreleased buffer in compat code.
1297 kes Change console Job name from *Console* to -Console- to eliminate
1298 Win32 filename problems. Put Win32 path separator when creating
1299 Console file. This fixes bug #846.
1300 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1302 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1304 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1305 to force Win32 error message.
1307 kes First cut strip path. The data should be passed to the FD,
1308 but nothing is done with it yet.
1309 kes Enhance the digest and signature routines in the crypto
1310 library to accept a JCR and to use it to print error messages
1311 so that they will go in the Job report rather than the daemon's
1313 kes Simplify some of the verify signature code.
1314 kes Simplify a few of the alternative returns in the signature
1317 ebl Use only POSIX regex instead of GNU regex in breg.c for
1318 File relocation. It fix broken freebsd compilation.
1319 kes Convert all other Dir files to use new ua class message
1321 kes Tentative fix for missing digest signature in bug 807.
1322 kes Correct handle problem in new win32_ftruncate routine.
1323 kes Convert ua_purge.c and ua_update.c to use new ua class
1324 message routines for bat.
1326 kes Correct incorrect installation of LICENSE in Win32 installer.
1327 kes Display LICENSE at the beginning of the Win32 install.
1328 kes Attempt to correct the need for the png files to be installed
1330 kes Reapply my bat.conf install script in qt-console. I think I
1331 editted bat.pro instead of bat.pro.in and it was lost.
1332 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1333 the /var/lock/subsys for subsysdir. Also corrects typos in the
1336 kes First cut update job.
1337 kes Correct configure to include qmake of src/qt-console directory.
1339 kes Make restore job yes/mod/no print in one command so GUI works.
1340 kes First cut implementing backup and restore client.
1341 kes Correct editing in Verify output that caused a seg fault.
1343 kes Insure that bat.conf is not overwritten during installation.
1344 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1345 while I was implementing migration in March 2006 !
1347 ebl Cleanup file relocation, using char *RegexWhere instead of
1348 char *where + bool where_use_regexp
1349 kes Update some manpages and add bat manpage.
1350 kes Make a first cut at converting bacula.spec.in for bwx-console
1352 kes Apply patch from John Goerzen to add hostname as fourth argument
1353 to make_catalog_backup script.
1354 kes Fix typos I introduced into bsmtp.c
1355 kes Make pm_strxxx() routines handle input of NULL pointer. This
1356 is to protect from NULL pointers returned from SQL databases.
1357 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1358 kes Add more debug to FIFO code -- fix fifo regression test.
1360 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1361 kes Add thread timer to bnet_connect() to break from OS if wait time
1364 kes Update Win32 build to include new files, new symbols, and
1366 kes Implement socket level heartbeat (tcp_keepidle)
1367 ebl Commit File relocation patch
1368 kes Make bat have 'make install' target.
1369 kes Warn during install if old gnome-console binary found.
1370 kes Warn during install if old wx-console binary found.
1371 kes Add -8 option to bsmtp command line to add content type utf-8.
1372 Fixes bug #809. (Character coding problem in bsmtp).
1373 kes If < is found in target (from, to, cc) then do not enclose the
1374 target in < > in bsmtp. Fixes bug #772 (malformed address).
1375 kes When printing certain items in dbcheck, stop after 300000.
1376 Fixes bug #822. (dbcheck loops).
1377 kes Incorrect status in Dir after waiting for mount with poll set.
1380 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1382 kes Print waiting to reserve a device every 5 mins.
1384 kes Don't call close_part in label.c if tape and relabel.
1385 kes Don't free volume if busy in close() -- should help with
1387 ebl Fix #824 RunScript bug (After script could be execute twice)
1388 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1389 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1390 Add a regression script to test RunScript
1392 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1395 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1396 deprecated. No additional bugs will be fixed, and they will be dropped
1397 in a future release (probably 2.4.0).
1398 kes Change name of wx-console to bwx-console to make it more Bacula
1400 kes Change the name of gnome-console to bgnome-console to make it
1403 kes Some time in March, a Feature Request with patch from Jorj Bauer
1404 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1406 The ability for the director to validate a Client (FD) CN against
1407 an arbitrary set of patterns rather than the hostname, with
1408 A new 'TLS Allowed CN' set of directives which are implemented
1409 in the Client resource. Then pattern matching is used in place
1410 of hostname matching against the Certificate's CN. As an example, we
1411 have certificates which (a) use a local CA, and (b) have a CN of the
1413 kes Add new/changed entry points to Win32 build
1414 kes Create unaccepted-projects for projects that are not accepted.
1415 kes Simplify locking in the reservations system.
1416 kes Add more debug code in reservations.
1417 kes Make sure error condition on reserving a volume is handled correctly.
1418 kes Correct handling of volume_in_use.
1419 kes Correct handling of initializing a device.
1420 kes Move handling of broadcasting releasing a device into release_device().
1421 kes Correct attaching dcr to dev so that it is only done if device
1422 is properly initiated.
1424 kes Locking debug level tweaks in SD.
1425 kes Tweak new Volume code.
1427 kes Add exec external-command [wait-seconds] to bconsole. This
1428 executes the external-command. Note! normally external-command
1429 should be enclosed in double quotes.
1430 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1431 it should normally be off in a production system.
1433 kes Implement die command for SD so that we can force it to dump.
1434 kes Implement SD lock debug code.
1435 kes Implement new algorithm for keeping Volume list in SD. It
1436 is now owned by the device.
1438 kes Implement new code for freeing in use volumes that should
1439 resolve if not all, some of the problems of multiple drive
1440 tape conflicts described in bug 801.
1442 kes Fix gui/bacula-web/images files in svn.
1443 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1445 ebl Fix a bug in batch mode (in string escape)
1446 kes Correct migration prune SQL typo that crept in in a
1447 recent 2.1.x change.
1449 kes Move bnet_despool() into class in bsock.c
1450 kes Modify job report to include director name and Build OS.
1451 kes Move drop root privilege and check_catalog() before fork.
1452 kes Add update database scripts (version 9 to 10) to updatedb directory.
1454 ebl Check size and age of each file after its backup to see if
1455 it has changed during backup, if 'checkfilechanges' is set.
1456 The FD will do an extra check (stat(2)) after
1457 each file backup. mtime, ctime and size are compared with
1458 'before backup' information. If time or size mismatch, an
1459 error message will be generated. You must upgrade FD to use it.
1461 kes Make database name and user configurable
1462 --with-db-name=xxx --with-db-user=xxx
1463 kes Add back database type to message.c for debugging.
1465 kes Implement dir_sql() which issues an SQL query.
1466 kes Modify bat medialist to use dir_sql() and do some minor C++
1467 formatting as well as eliminating a number of pointers, simplifing
1470 kes Fix some of the mtx-changer grep commands for tape label readers.
1471 kes Convert a number of bsendmsg into the appropriate send/warning/error
1472 message class calls.
1473 kes Suppress the using database message in the .sql command.
1474 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1476 kes Add context menu for floating a window.
1477 kes Some minor cleanup and name changes in qt-console
1478 kes Add doing mt setblk 0 in Win32 mtx-changer.
1479 kes Apply Martin's bug fix to move definition of ENODATA for
1481 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1482 sqlite2 and sqlite3.
1484 kes More pruning cleanup.
1485 kes Turn on wait_for_drive by default in mtx-changer.
1486 kes Turn on Batch insert code by default as it now passes regression.
1487 kes Add ./configure --enable-bat to enable building of Bat.
1488 No install yet though.
1490 kes Implement a new .sql command for bat.
1491 kes Implement code to turn off pruning in obtaining the next volume.
1492 Pruning is turned off for the status dir command, but turned on
1493 for SD requests and for the list nextvolume command.
1495 kes Correct Qmsg() that was not updated correctly when committing a
1496 previous change (probably the recent TLS patch).
1498 kes Write new subroutine is_volume_purged() that explicitly checks
1499 if the Volume is purged, and if so marks it as such. This should
1500 resolve problems reported about needing to mount twice to recycle
1502 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1503 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1504 amount of duplicated code.
1505 kes Do volume pruning only for the Media Type desired (reduces pruning time
1506 if multiple Media Types are in the same pool).
1507 kes Implement more detailed info in the Job report for the Bacula version
1509 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1511 ebl Add bbatch tool to bench database and insert mode.
1512 Fix sql quote stuff in batch mode
1513 Fix sql stuff for mysql
1515 kes Correct problems with am/pm scheduling. Fixes bug #808.
1516 kes Implement new prunning code that prunes up to 1000 jobs at
1517 the same time. The same technique can be applied to a number
1518 of other prune/purge subroutines.
1519 kes Add an insanity check when starting a new tape job to ensure
1520 that the tape position has not been changed. If so fail the
1522 kes Fix Win32 build for dlls to add the folllowing:
1523 src/lib/bsock.c -- new file with new entry points
1524 src/lib/dlist.c -- new entry points
1525 src/cats/sql_create.c -- new entry point
1526 src/cats/sql_cmds.c -- new DATA item exported
1528 ebl batch mode cleanup bscan-test is ok now.
1529 kes Implement SD code to check length of disk volume before appending.
1531 kes Correct return status on db_batch... routines.
1532 kes Add call to db_write_batch_file_records() to migration code.
1533 ebl Fix AfterJob timing
1534 kes Move the checking of the database in initializion of the Director
1535 to after we drop privileges. This avoids the need for both root
1536 and bacula access to the DB.
1537 kes Correct a misplaced variable definition in src/filed/backup.c
1538 kes Correct how the new batch insert db_create_attributes_record()
1539 uses the arguments. Caused a seg fault in bscan.
1540 kes Implement lock() and unlock() methods in DEVICE class.
1541 Implement block() and set_block(xx) methods in DEVICE class.
1542 kes Modify bnet_connect() so that it uses time() to check for the
1543 wait time expiring (on some OSes, some system calls may not
1544 return immediately).
1545 kes Modify Verify to obtain the previous JobId when it is actually
1546 running rather than at schedule time (as it was in 1.38.x).
1547 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1549 kes When checking pid in pid file, continue running if the pid is
1550 the same as ours. This occurs on IRIX after a system crash.
1553 kes Extend new GUI API.
1554 kes Make the ua structure a class, and implement send_msg(),
1555 error_msg(), warning_msg(), and info_msg().
1557 kes Apply fix from for building wx-console on the Mac from
1559 kes Implement new select mechanism for GUI programs.
1560 kes Reorganize initialization of stackedWidgets in bat.
1562 kes Add updated nagios plugin supplied by Christian Masopust.
1564 kes More bat implementation.
1565 kes File migrate bug with Pool Occupancy using mediaid instead
1566 of jobids. Fixes bug #795.
1567 kes Fix orphaned buffers in filed backup and verify due to
1568 crypto buffers not freed during errors. Fixes bug #789.
1569 kes Extend new GUI api code to tree commands.
1570 kes Ensure that tree and dot commands check console ACLs.
1571 kes Permit marking directory with trailing slash.
1572 kes Allow 20 console connections (instead of only 10).
1574 kes Add smartctl call to bacula-sd.conf as an example of getting
1577 kes Modify jobq.c to let simultaneous restore jobs run. This may
1578 cause them to fail if they cannot get a drive.
1579 kes Add Client Connect Wait to Storage daemon to permit users to
1580 modify the time the SD waits for a FD connection.
1582 kes Correct virtual changer check which was backwards. This caused
1583 volumes to be unloaded into slots already occupied.
1585 kes Apply Command ACL filter to JobId list in restore command.
1586 kes Correct typeo in var.c patch.
1588 kes Don't let Bacula prune File or Job records for the current Job.
1589 kes Fix variable substitution pad + inc bug reported (with patch)
1592 kes Correct SQLite log table index as reported by Luca Berra.
1594 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1596 kes Begin implementing new comm signals for API.
1597 kes Fix a few places in lib/message.c where the open fd may
1599 kes Continue implementing lib/bsock.c (real class). Make jcr,
1600 who, host, and port private. There are new methods to access
1601 them for non-class use. This required touching a number of files.
1603 kes Add LANG=C to autoconf/randpass so it works with languages other
1604 than English. Fixes bug #788.
1606 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1608 You will not be able to generate Include/Exclude list any more.
1609 It will be fixed soon.
1610 If you want to use this, you can apply
1611 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1613 kes Restore of sockets created false error messages because Bacula
1614 no longer restores sockets, but the code was still trying to
1615 set the attributes on a non-existent file. Reported by a user.
1616 ebl finish RecyclePool feature
1617 Media will takes Pool.RecyclePool
1618 when moving from Scratch to a Pool or when user will do
1619 update volume=xxx frompool
1620 To use it, add RecyclePool = aPool to your Pool resource
1623 RecyclePool = Scratch
1627 kes Expand new BSOCK class adding signal() and new BNET signals.
1628 kes Begin enhancing the dot commands adding a new API function
1629 that returns more information and will make it easier
1630 to interface to the Director from a program.
1632 kes Make DEVICE fd private. Its new name is m_fd, and can be
1633 obtained with dev->fd() outside the class. This is the
1634 first of many DEVICE members to be made private.
1635 kes Implement Michael Renner's idea on having a virtual disk
1636 changer. I made some minor modifications (e.g. I did not
1637 implement the Virtual Changer directive, but simply set
1638 the Changer Command to an empty string.
1640 kes Implement a BSOCK send() method that writes the whole record
1641 in a single write() request rather than in two.
1642 ebl add update volume=xxx recyclepool=yyyy
1643 volume takes recyclepool from pool when using update volume=xxx from pool
1645 kes Fix encryption deblocking bug, which caused some restored files
1646 to be truncated. This fixes bug #763.
1647 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1648 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1650 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1651 ebl Use btime_t instead of uint64_t in media patch.
1653 kes Optimize the use of the database a bit in the Status dir command.
1654 Only open it when needed, ensure that if any previous database
1655 was opened, it is closed.
1657 kes Correct VolCatBytes bug from media patch.
1658 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1659 in the case of orphaned records.
1660 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1661 and File records in 300K chunks to be more efficient. This
1662 idea came from Juan Luis Frances (if I remember right).
1663 kes Apply Eric's scratch patch that moves a purged Volume to
1664 the RecyclePool. Question: how is RecyclePool set? what
1665 happens to the ScratchPool?
1666 kes Apply Eric's media patch that collects read/write media
1667 times as well as byte counts. This patch requires a
1668 simultaneous upgrade of the DIR and SD. Note, there
1669 should be some way to turn off timing. I'm not sure
1670 times are in Bacula units.
1671 kes Apply Eric's batch-insert patch.
1673 kes Update projects list.
1675 kes Implement Include/Exclude file lists in FD as dlists using
1676 the new dlistString class. This permits efficiently having
1677 large include/exclude lists and completes project Item 25.
1678 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1679 console is authorized to cancel the job. This fixes bug
1681 kes Modify SD so that the VolCatJobs medium record is updated
1682 at the beginning of a Job rather than the end. This
1683 fixes bug #775 where exceeding MaxVolJobs caused jobs
1685 kes Added a mutex around getting and setting Volume information
1686 so that multiple simultaneous jobs will single thread.
1688 Switch to using Subversion
1689 kes Remove src/pygtk-console/ from configure
1691 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1692 plus the entrypoints.
1693 kes Apply patch supplied that corrects debug print
1694 in canceling jobs for max run time. Supplied as
1695 part of bug #621, which was previously fixed.
1697 kes Test on job_canceled() and sd_msg_thread_done inside
1698 loop starting the message thread to avoid a race condition.
1700 kes Remove rl_catch_signal from console.c as it conflicted
1701 with the header definition. Fixes bug #765.
1702 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1704 kes Clarify some stored/acquire messages to indicate if the
1705 problem is with read or append.
1707 kes Fix memory leak with storage ids in cats/sql_get.c
1708 kes Terminate watchdog earlier to avoid reference to released
1709 memory -- reported by Jason Austin.
1710 kes Move closing the database from jobq.c to the director daemon
1711 termination routine. This fixes memory leaks for shadow jobs
1712 (i.e. migration jobs).
1713 kes Free up the unique jobid chain items in migrate.c. This fixes
1714 a memory leak problem.
1715 kes Convert some ugly looking for statements to use foreach_alist
1716 in findlib/find.c. This will facilitate converting the structures
1717 to use dlist (for large include/exclude lists).
1718 kes Fix a bug in the btree.c and btree.h routines, then rename them
1719 rblist and add them to be built in src/lib. Include some new
1720 methods written by Rudolf Cejka that make the code more readable
1721 (hides some of the ugly casting).
1722 kes Add set_next() and set_prev() methods which make the code much more
1723 readable. Also add a new dlistString class that facilitates storing
1724 strings in dlists. To be used in the large include/exclude lists.
1725 kes Make some trivial modifications to lib/tree.h that use rblist
1726 rather than dlist for storing the tree links. This was suggested
1727 by Rudolf Cejka. The result of this is that the restore tree now
1728 uses red-black binary trees rather than simple linked lists. This
1729 should give rather dramatic speed improvements for directories
1730 contining large numbers of directories/files (more than 10000).
1732 kes Fix maxruntime bug #621.
1734 ebl Implement the include JobID in spool file name project.
1735 kes Reorder projects file in order determined by Jan 2007 vote.
1736 kes Implement item #12 on project list -- quick release of FD by
1738 kes Fix open of SQLite3 db where user does not have write permission
1739 so that DIR does not crash. Fixes bug #761.
1741 kes Add back missing @ in Win32 Makefile.
1742 kes Change 'Device not configured to autolabel' from INFO
1744 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1745 which should restart an indefinite # of times.
1746 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1747 other DIR specifications.
1749 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1750 Fix path quoting in SQLite scripts.
1751 Fix problems with SHGetFolderPath.
1753 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1755 kes Fix Job restart on error bug that promotes an Inc to a Full
1756 backup. This should fix bug #755.
1757 kes Add qt-console and first cut of code.
1761 kes Fix Bacula->Documentation link on Win32 to point to index.html
1762 instead of bacula.html. Fixed bug #750.
1763 kes Return JobId in db_get_job_record() when JobId==0. This should
1765 kes Do not release source pointers when restarting a failed job.
1767 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1768 This *should* fix bug #747.
1769 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1772 kes Modify USTORE constructor to set an empty store_source string,
1773 and don't copy the store_source string in a cancel. Hopefully
1774 this will fix Arno's seg fault, bug #744.
1775 kes Add back code to disable conio in configure. Fixes bug #743.
1776 kes Correct the Options scanner in the FD to correctly handle
1777 SHA1 option, which was eating the next option. Reported by
1779 kes Add code to indicate when the SD is spooling, spool wait, and
1780 despooling as requested by Alan Brown.
1782 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob