1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Make accurate mode with hash disk pass regression tests
30 ebl Implement first cut of accurate backup with hash disk.
32 kes Force unload of volume when wrong volume mounted in SD.
34 kes Fix bat seg fault at termination.
35 kes Add Bacula generated version to bat about box.
38 kes Experiment with allowing multiple read jobs.
39 kes Move final volume swapping code to DCR method and
40 call it from acquire_for_read().
41 kes When wrong volume is mounted during read, unload_autochanger.
43 kes Integrate the libdbi changes from Joao Henrique Freitas
45 kes Stop searching for Volumes in SD askdir if DIR returns the
46 same volume name twice in a row.
47 kes Close bat console windows first to eliminate error message
50 kes Tweak the swap Volume from one drive to another code so that
52 kes Resolve several problems with recycling that broke the new
53 code (these problems are in 2.2.9 as well).
54 kes Remove the volume lock when calling the sysop code.
55 kes Don't mark a reserved volume with no writers as unused otherwise
58 kes Rework class structures for VOLRES, DCR, and DEVICE to make
59 the method names a bit more logical, and for more logically
60 handling the responsibilities.
62 kes Remove redundant code in terminating the scheduler that just
63 causes a seg fault in many cases.
64 kes Cleanup releasing a volume and make it a DCR method.
65 kes Improve algorithm for detecting pre-reserved volume and
68 kes Tweak volume swapping code so it works.
69 kes Correct name overloading in mount.c
70 kes Replace released flag in VOLRES with reserved and add access
71 methods for the VOLRES class.
72 kes Prevent volume from being released while being swapped.
73 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
75 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
77 kes Refactor parts of stored/mount.c
79 ebl Add sanity checks for VolWriteTime and VolReadTime
80 ebl Take care of bad clock changes while computing VolWriteTime
81 and VolReadTime. This should fix or limit #1066
82 kes Correct error string numbers in dird/catreq.c
83 kes Restructure reserving, acquiring, and mounting volumes. Calls to
84 autochanger are deferred for mount.c -- simplifes the code.
86 kes Do not prune any running job. It just fails the job.
87 kes Lock the volumes when changing dev->reserved_device and marking
88 the volume unused otherwise the device can get reserved by
89 another job before the volume is released, thus blocking it.
91 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
92 kes Fix bug #1063, reuse of freed ptr in list nextvol.
93 kes Release regex compile buffer in filed/job.c
94 kes Add proper type of const char in sql_create.c
95 kes Turn off debug in daemon termination routines
96 kes Move free_volume_list() before devices are freed in stored.c
97 kes Fix reference to uninitalized stack variables in bregex.c.
98 This should correct bug #1067.
100 kes Fix possible seg fault in SD when freeing a volume entry.
102 kes Implement unload_dev() before swap device.
103 ebl Add statistics prunning with option and menu
104 kes Separate unload_dev() from unload_other_device() in autochanger.c
106 kes Apply patch from bug #1069 that corrects spurious error messages
107 when ACLs enabled on SGI but no ACL exists.
108 ebl Fix small segfault in bacula-sd when debug level is 500
109 kes Modify run_program() and run_program_full_output() to use
110 call by reference for the results string. This corrects a long
111 standing problem where the address of the string may be changed
112 in the subroutine but not in the calling program.
114 kes Re-enable code to remember last volume mounted on a non-tape
116 kes Add patch supplied in bug #1068 that fixes a SD crash when using
117 a Virtual autochanger.
118 kes Generate correct JobMedia records during spooling/despooling when
119 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
120 <tih@hamartun.priv.no> for excellent analysis and testing.
122 kes Tweak hash algorithm for htable using Martin Simmons idea
123 for doing a circular shift.
124 kes Remember what volume is in VTLs (previously turned off for
126 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
127 pointed out some problems in creating JobMedia records during
128 spooling with concurrent jobs. Fix the problem by updating the
129 start file position before despooling and generate a jobmedia
130 record at the end of despooling.
132 kes Fix handling of JobMedia records during spooling and when a
133 Volume is changed without actually writing data to the Volume.
135 kes Rework certain SD locking based on gdb tracebacks of deadlocks
136 sent by Eric. This code now uses only the volume_lock() rather
137 than the reservations lock when at EOM and acquiring a new
139 kes Ensure only one exit point in several subroutines.
141 kes Implement bsock code to permit locking. Use the new code in Verify
142 in the FD to prevent the heartbeat thread from disrupting the Verify
143 data sent to the Dir.
144 kes Modify SD locking to eliminate locking the reservations system from
145 outside the system. Use the volume lock when getting media data
146 and reserving a new volume at end of media.
147 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
148 when SD starts are not locked into place.
150 kes Fix error compiling runscript code on 64 bit machines.
151 kes Tweak Win32 mount point code.
152 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
153 cleared giving bad file estimate).
154 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
157 kes Keep Schedule run lists in order as suggested by
160 kes Implement autostart scripts for Debian.
161 ebl Implement upgrade catalog scripts.
163 ebl Apply jobstat patch for long term statistics. Have to implement
164 purge stats command and upgrade scripts.
165 kes Fix mtx-changer.in for broken Debian mt program.
167 kes Fix large number of JobMedia records reported by Eric Bollengier.
169 kes Apply doc fix from bug #1062.
170 kes Resolve crash and improper restore wx-console Win32 restore
171 GUI. Fixes bug #1065.
172 kes Update Win32 wxWidgets to latest version.
173 kes Attempt to do correct handling of Win32 mount points. Should
175 kes Fix Win32 FD backup/restore memory leak due to improper termination
176 of BackupRead/Write. This fixes bug# 1038.
178 ebl Reduce memory usage for accurate backup, working only with ctime
179 and mtime. (not all Lstat field)
180 About 40MB for my linux system (400.000 files)
182 kes Add dcr->reserved_volume flag that allows us to release a volume
183 even if it is not vol->released. This allows maxvol2 to work when
184 Volumes expire and we are already writing to the device (i.e. a
185 volume is pulled out from under us by another job terminating after
186 we reserve the drive).
188 ebl Permit multiple command/console per runscript definition.
189 RunScript { command = /bin/true ; command = /bin/false ... }
190 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
191 (restart an application) just after the VSS snapshot on windows.
192 kes Don't zap dcr values during release_volume() as they might
193 have the next Volume to be mounted.
194 kes Fix AIX prototype.
196 kes Second cut of drive switching during backup.
199 kes Update Win32 version of wxWidgets to most recent version.
200 kes Tweak Copy job details.
201 kes Rework dir_find_next_appendable_volume to make a bit more effort
202 to find a suitable volume before giving up.
204 kes Make ask_sysop_to_create... to return if waken from wait.
205 This helps get out of blocked conditions.
206 kes Experimental implementation of switch_device in reservations.
207 kes Implement FD version to allow easier protocol changes.
208 kes Add Plugin Options string -- not yet passed to FD.
209 kes Implement PluginOptions ACL.
211 kes Attempt to correct problems with restores with autochangers and
212 use counts going negative
213 kes Rework SD status command and implement API for bat. Implements
214 header, runing waitreservation, devices, volumes, spooling,
215 and terminated status keywords.
216 .status storage=xxx <keyword>
217 kes Clarify TLS error message by adding double quotes around name.
218 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
219 kes Pass jcr to tls routines so debug messages can be handled better.
220 kes Rework jobq resource allocation code, and possibly fix a bug
221 that caused reference counts to get out of sync.
223 kes Rename fd/dir plugin to use Bacula standard underscore.
224 kes Plugin work -- bring dir up to fd level.
225 kes Start implementation of VTL code
226 kes Fix Win32 build after adding new cats subroutine.
228 kes First cut at Duplicate Job implementation.
230 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
231 kes Start PluginOptions string, and refactor a bit of ua_run.c
232 ebl Apply Allan patch that permit to reset recyclepool.
234 kes Test patch -- possible fix or improvement for bug #1053
235 kes Refactor FD and SD status commands to permit new API code in
236 SD, and to fix Win32 build.
237 kes Win32 build is now working.
239 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
240 some ideas in patch from Scott Bailey.
241 kes Begin implementation of duplicate Job control.
242 kes Fix some of Win32 build after recent additions.
243 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
244 which causes the FD to detect whether or not the OS has the
245 honor no dump bit (*BSD systems), and if so, to skip backing up
246 any file with this bit set. The feature is enabled by setting
247 'honor no dump flag = yes' in the Options section of a FileSet.
249 kes Correct po warning message with datarootdir
250 kes Implement more code in dird.c to put configuration parsing in
251 a class rather than use globals.
252 kes Restructure SD status command for implementation of bat API
255 kes Suppress incorrect 'Will not descend from x into y' messages.
256 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
257 daemon globals used by parser.
258 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
260 kes Fix free of plugin_list when none exists.
262 ebl Apply accurate project patch.
264 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
265 on non-mempool object)
266 kes First cut of converting FD .status to work with bat API.
268 .status client=XXX header
269 .status client=XXX running
270 .status client=XXX terminated
271 kes Implement first cut of Copy Job.
272 kes Implement Catalog in Pool resource. It overrides catalog specified
273 in the Client resource.
275 kes Apply patch (with some difficulties) from Joao Henrique Freitas
276 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
278 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
279 ftruncate() actually works. In the case of some (cheap) NAS devices,
280 it does not, and so recycling NAS Volumes does not work. The code
281 simply unlink()s the file, then recreates it. This fixes bug #1011.
283 kes First incomplete cut of big malloc blocks for htable.
284 kes Tweak plugin code.
286 kes Plugin debug code + tweak a couple bat dialog layouts
288 kes Fix creating first JobMedia record during Migration to include
289 proper index. This caused slow restores of migrated jobs.
290 kes Temp fix to plugin name file_index.
291 kes Bacula backed up and restored a MySQL database.
293 kes Implement plugin restore.
294 kes Implement parsing of db_driver to give db_type index.
296 kes First cut of plugin restore code.
297 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
298 and do not strip paths on symbolic links.
299 kes Set catalog backup database and user name from values specified on
300 the ./configure line.
301 ebl Fix #1031 about wrong pool source information in job report.
304 kes Remove a redundant jcr argument to find_files, match_files, and
306 kes Implement '.status dir header|scheduled|running|terminated' that
307 prints the requested status section. With the exception of the
308 header, the other reports have fields separated by tabs (\t).
310 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
311 a resource embedded run command to find a since time if no explicit
312 since time was supplied on the command line.
313 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
314 that updates the state file at job termination time in addition to
315 when the daemon terminates.
317 kes First version where a plugin did a backup.
318 bpipe-fd.so created a backup file, wrote a test
319 string to it, and Bacua could restore this fabricated file.
321 kes Implement DB Driver = string for the DBI driver.
322 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
323 kes First cut of code for loading Win32 plugin dlls. Implement
324 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
325 and implement a dlfcn.h file based on opengroup's definitions of
328 kes First cut plugin directives.
330 kes Apply patch from bug #1049 to prevent stripping the path on a
332 kes Attempt to fix bug #1047 where stripping a path corrupts the
333 heap. Waiting for feedback.
334 kes Correct the Mount message not to suggest labeling a new tape
335 when doing a restore. Submitted by email by John Stoffel.
336 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
337 FD by using casting. Reported in bug #1042.
339 kes A bit of crypto cleanup. More later.
341 Release Version 2.2.8
343 kes Apply patch from Martin to correct bug #1040, bscan sets existing
345 kes Fixed important spelling error in doc -- bug #1045.
347 ebl Fix bextract to be able to extract non-portable Win32 data to
349 kes Move initialization of read/write res lock earlier in the code.
350 This fixes the crash with a null conf file. This fixes bug
352 kes Redefine CURES in lib/parse_conf to be URES and move it all
353 into lib/parse_conf.c -- this responds to bug #1042, but does
354 not fix it. The fix is not to compile with FORTIFY_SOURCE.
355 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
356 the trunk SVN. I don't think this was reported as a bug.
358 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
360 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
362 kes Add DataDespooling and DataCommitting status (committing is
363 the last despooling).
364 kes Finish implementation of new reservations code noted below.
366 kes Fix bsnprintf for float point numbers. I broke recently when
367 parameterizing some variables. This fixes bug #1036.
368 kes Undo recent reservations changes ... will apply them later
369 when they work better.
371 ebl Fixes #1034 which cause mysql to hang the connection after 8h
372 ebl Change default statistics target of filename.name and path.path
373 fields for PostgreSQL. This speeds lookup by indexes. Thanks
375 kes A few more tweaks to new reservation code. Make sure to clear
376 vol released flag when retaking volume. When reading label and
377 label is bad mark volume unused. When recycling, mark volume
378 unused so it can be renamed.
380 kes Fix reserve_volume() so it doesn't release a volume in use
381 (i.e. a volume entry not marked released). This should be
382 the last part needed to fix bug #1018.
384 kes Move Heartbeat documentation from Job to Director resource.
385 This fixes bug #1033.
387 kes Fix existing switch drive SD code to call autochanger to release
388 any old volume. This must be done to keep the autochanger from
389 releasing subsequently newly reserved volumes in doing a close().
390 This should fix bug #1018.
391 kes Fail if attempting to get console input in batch mode. This
392 should help fail RunScript console commands that are incomplete.
393 kes First cut implementing switch_drive() in SD (not actually called).
395 kes Implement first cut running console commands in a RunScript.
397 ebl Fixes bug #1028 where 'Selection Type' option was not usable
399 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
402 Release Version 2.2.7
404 kes Add new free_tls() entry point so that Win32 builds.
405 kes Fix compile warning in src/lib/util.c
406 kes Fix entry point for edit_job_codes() so that Win32 builds.
407 kes Fix seg fault Frank Sweetser reports in regression testing
408 on his systems. The problem was that the original author of
409 bsnprintf.c did not take into account the side effects of
410 using ++x in the argument to a #define.
411 kes Make SD protocol backward compatible with version 2.2.x.
413 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
414 because Bacula no longer restores sockets.
415 ebl Always use ignorecase fileset option on win32 FD.
417 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
418 that implements double quoting include names in conf files,
419 and also allows piping input by having the first character
420 be a vertical bar (|).
421 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
422 that implement %f in RunScripts to pass the FileSet name.
423 kes Skip leading | when lex input comes from a pipe as suggested
424 by Michael Stapelberg <michael@stapelberg.de>.
426 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
427 Nerijus Baliunas <nerijus@users.sourceforge.net>
429 kes Implement Plugin Directory and plugin events.
431 kes Implement a security enhancement: TLS authentication but no
432 encryption. Enabled by setting 'TLS Authentication = yes'.
433 Note when this is on, TLS encryption is turned OFF!
435 kes This patch corrects a problem where the maximum concurrent storage
436 jobs counter gets out of sync during restore jobs causing jobs to
437 'wait on max Storage jobs'. This patch fixes bug #1009.
439 kes This patch fixes bcopy so that it produces correct Volumes.
441 kes This patch eliminates spurious output to the console during a VerifyVolume
442 job that contains encrypted data. It fixes bug #1024.
444 kes This patch prevents the 'status dir' command from trying to use a scratch
445 volume and possibly moving it from one pool to another. This patch fixes
448 kes Add new include to postgresql.c suggested by Marc Cousins so
449 that it compiles correctly with pgre version 8.3.
451 kes Fix --archivedir addition to configure. Replace it with
452 --with-archivedir in configure.in This fixes the regression
454 kes This patch fixes bug #1012 where the job is canceled because
455 of Max Run Time exceeded when the job has not yet started.
457 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
458 one 'part' to write. Instead of each part being stored on disk,
459 written to DVD, then deleted from disk, all parts are written to disk,
460 and only the last is written and deleted from disk.
461 kes This patch fixes the status command to include the formating string for
462 JS_AttrInsterting. It fixes bug #1021.
463 kes This patch should fix the Mac OS X build problem on the latest
464 Darwin, where sys/types.h was not included correctly (apparently
465 due to a change in the Mac headers). The solution was to explicitly
466 ensure that it is defined for the ./configure.
467 This patch also has a rebuild of configure that includes the Debian
468 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
469 kes This patch should ensure that queued messages to the console are
470 displayed as soon as possible. It should fix bug 1007, but has been
471 reported not to work.
473 kes This patch fixes the infinite loop when trying to increase the
474 maximum number of volumes in a Pool during the add command.
475 This patch fixes bug #1008.
477 Release Version 2.2.6
479 db Remove extra data on estimate command in joblist for bat.
481 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
482 really change anything, but is the beginning of doing it *right*.
483 To do it completely right the LastWritten date must be passed to
484 the SD, but it is not yet done.
485 kes Minor tweaks to some bat restore SQL.
486 kes This patch fixes bug #1003 where putting the message output from
487 a Verify job into the catalog results in a recursive loop. The problem
488 seems to show up only with postgresql (to be verified).
489 kes Correct %x to %p in postgresql debug statement.
491 kes Fix bug #942 where lots of emails where generated when the heartbeat
492 interval was low and Bacula wanted a different tape from the one in
495 ebl Add new SD despooling attributes and Dir inserting attributes
496 job status codes in the catalog (Status table).
498 ebl Use qmake-qt4 instead of qmake when available (debian system).
500 kes Add a security warning to src/cats/make_catalog_backup.in indicating
501 that passing the password via the command line (arg 3) is insecure.
502 This responds to bug #990 (it doesn't fix it).
504 kes Set default debug_level to zero. This corrects bugs #991 and #993.
505 kes Fix a crash in bat when it cannot connect to the Director for example
506 if the Director is not running.
507 kes Remove redundant INDEX (JobId) from File table in the trunk.
509 kes Make explicit exception to GPL in LICENSE to permit linking
510 the Win32 FD with Microsoft VSS code.
511 kes Apply the Solaris package patch from
512 Masopust, Christian <christian.masopust@siemens.com>
513 kes Apply the patch to optionally add a timestamp in the debug output
514 submitted by Mariusz Czulada <manieq@wp.eu>.
516 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
517 backend (sql_strerror). Fixes bug #989
519 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
520 It applied with no problems.
521 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
523 kes Redirect stderror to stdin on mt status command in mtx-changer.in
524 since the status is returned on stderr on Solaris.
525 kes Activate Close button on tray-monitor window. This fixes
527 kes Check for NULL item in parse_conf.c before calling it. In the
528 case of Device, there is no item and this caused a seg fault when
529 Device appears in the conf file.
530 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
531 avoids pulling in config.h multiple times in some new code.
533 kes Fix spurious warning message printed when creating a volume with
534 a LabelFormat. This fixes bug #976.
536 Release Version 2.2.5
538 kes Add JobId in place of Job name in all the Jmsg() output.
539 kes Correct the APP_DESC for the Win32 storage service (remove an e).
541 kes Make maxvol-test and new more strict maxvol2-test work.
542 kes Print JobId in all Jmsg() job output.
544 kes Add new SD despooling attributes and Dir inserting attributes
545 job status codes. This fixes bug 961.
546 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
548 kes Fix doc issue. This fixes bug #963.
549 kes Fix listing performance problems in bat. Pointed out by
551 kes Remove old debug code.
552 kes Fix bat code that tests for Win32. This should fix bug #968
553 kes Query 5 list wrong Vol after migration. This fixes bug #960
555 ebl Fix #969 where user can't change Replace option in restore menu.
557 kes Save jcr in thread specific data (tsd) for each thread.
558 kes Make Dmsg() print JobId as -%u.
559 kes Make Jmsg, Emsg, and others automatically pickup the jobid
560 for the thread if it exists.
561 kes Remove old reservation debug jid code.
562 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
563 ebl Add an option that permit to specify spool size in job
564 definition. (Applying patches/testing/spoolsize_per_job.patch).
565 You must upgrade SD and DIR at the same time.
566 dvl Add new configuration item --archivedir
567 dvl Adjust regression tests to use tmp not /tmp. This will allow
568 multiple concurrent runs of the regression tests.
570 kes Fix race condition that drops final block written to volume.
571 This happens in rare cases with multiple simultaneous jobs
572 when the Volume fills. This fixes bug #964. May be related
573 to bug #935 and possibly #903.
574 kes Eliminate more strerror() and replace with bstrerror().
575 kes Remove BSD getopt and replace with unrestricted IBM version.
576 kes Fix Win32 build for changed calling sequences.
577 kes More tweaks to the mount volume routines to get everything
578 right. Changed variable name from find to have_vol, which is
579 much easier to understand.
580 kes Enhance btimer debug code.
582 kes Fix FD->SD authorization failure, which was due to spurious
583 wakeups from a pthread_cond_timedwait(). Simply check the
584 predicate before continuing. This fixes bug #953.
585 kes Add const char where needed (more to do). Remove temp debug code.
587 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
588 kes Don't overwrite error message in check_tables_version.
590 kes Unlock batch insert tables with same calls used elsewhere.
591 kes Allow starting 59 jobs a second.
592 kes Make SD session key more random.
593 kes Add retry for SQLite opening db if it fails. Probably helps
595 kes Suppress extra error messages during batch insert failure.
597 kes Add jcr to timer packets so if killed message can be sent to job.
598 kes Add JobId to all Dmsg() output.
599 kes Put some FD auth code on dbglvl rather than fixed.
600 kes Return insert attributes error message in db msg buffer to avoid
601 false error messages. Helps fix bug #966.
602 kes Separate batch init error messages. Probably helps fix bug #966.
603 kes Make SD code that contructs attribute insert check string lengths
605 kes If Dir gets an error during inserting attributes, cancel SD.
606 This reduces unnecessary error messages.
608 kes Correct search boolean for getting Volume info
609 ebl Cleanup batch insert code. Probably fixes bug #965.
610 kes Back out one small change to the reservation system (reserving a volume).
611 kes Rework how a Volume is mounted. It is now much more intelligent and
612 will always attempt to use any mounted volume if possible and reduces
613 calls to the Director asking about volumes.
615 kes Turn off some code when batch insert not enabled.
616 kes Edit FD name in connect error messages.
617 kes Rework the reservation system to take into account that the Director
618 might give us a Volume that is different from the current one being
619 used, and to ensure that we don't exceed Maximum Volume Jobs.
620 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
621 fatal error with multiple jobs running'
622 kes Add more debug code in reservation system.
623 kes Implement maxvol-test to check bug #947.
625 kes Add code to handle tray monitor separated from Win32 FD.
626 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
628 kes Add missed return in fixing verify bug -- trunk only.
629 ebl Fix a command parser issue causing a director segfault.
630 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
632 kes Increase the max block size to 4MB fixes bug #957.
633 kes ERABT if user sets min block size > max block size. Fixes bug #956.
634 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
635 is not properly mounted (recognized) during a poll.
636 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
637 Job that has differences reports Verify OK.
638 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
640 ebl Add an option to operate on all pools with update vol parameters.
641 This complete the project 20. Patch from Nigel Stepp.
642 ebl Add history support to bconsole when using readline.
643 Using Ctrl-D to exit doesn't update .bconsole_history
644 kes Modify new volume algorithm to use max MediaId for generating next
645 volume number rather than the count of Volumes. This should essentially
646 eliminate the failure rate if some volumes were deleted. Bug #921.
647 kes Begin implemention of Optimize Job Scheduling.
648 kes Implement restore callback that Dirk and I agreed on for bat
649 restore. This fixes bug #928. Restore of backup of zero files fails.
650 kes Fix SQL Catalog logging which broke with new db_escape_string
653 Release Version 2.2.4
655 kes Fix bacula_cats.def for new db_escape_string().
656 kes Increase size of name string when FD making connection to SD.
657 May fix bug #953. FD->SD connection failure.
659 kes Add code to help Dan debug 2drive-incremental-2disk test.
660 kes Add code to try to fix bug #908.
661 kes Add waits to multiple exit detection code to try to force pid
662 file to always be deleted.
663 kes Restore good dev.tar.gz to rescue set appropriate binary property.
665 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
666 trying to switch drives by checking for blocking before unblocking.
668 kes Cancel storage daemon in all cases where FD reports error. This
669 should fix virtually all cases of bug #920.
670 kes Fix db_escape_string() for MySQL which did not compile.
672 kes Fix error message that was clobbered when Dir tells SD it does not
673 have write permission on Volume. This should fix a minor point
674 in bug #942, but not the main problem.
675 kes Add code to cancel job in SD if FD connection fails. This should
677 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
678 dvl Pass jcr and db into db_escape_string() to enable better escaping
680 kes Fix migration code to get correct Volume name with multiple volumes
681 by skipping |. Fixes bug #936.
682 kes Implement patch supplied by Landon to fix bug #944 where using
683 TLS with bconsole uses 99+% of the CPU.
684 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
686 kes Move patches into patches directory.
688 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
691 ebl Using 'm' in bconsole will show messages like before,
692 and not memory usage.
693 kes Fix bug #935, and probably also bug #903 where files were not
694 restored. MediaId was not properly set in JobMedia record after
697 kes Suppress chown and chmod error messages if the FD is not running
700 kes Apply Martin Simmons' patch that should turn off the new API usage
701 when batch insert is turned off allowing building on older
703 kes Add ./configure search in qwt-qt4 for qwt package
705 kes Bacula is now free of 3rd party GPL copyrighted code!
707 kes Add guid_to_name.c/h which replace idcache.
708 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
710 ebl Detect if new PosgreSQL batch insert API is present.
711 kes Correct incorrect mempool call causing Director crash. Occurs on
712 systems without va_copy().
713 sb Update spec files for 2.2.1 release
715 kes Fix memory pool call in ua_output.c. bug #934.
716 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
717 Add test program to fnmatch.c
719 kes Integrate patch to README.vc8 from
720 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
721 edit it to get it into Unix patch format.
722 kes Implement mkpath.c to replace old FSF makepath.c
724 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
726 Release Version 2.2.1
728 kes Update POTFILES.in
729 kes Cleanup a few underquoted AC_DEFUNs in configure
730 kes Apply patch from Martin Simmons that adds a test for va_copy to
733 kes Fix bug #921 by increasing the number of tries to create a new volume
735 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
736 can be called multiple times. Implement a version for machines
737 without va_copy() that gets a big buffer.
739 kes Integrate more portable zone offset code into bsmtp.c
740 Submitted by Attila Fülöp.
742 kes Fix bad SD->FD return status reported by
743 (James Harper) <james.harper@bendigoit.com.au>
744 ebl Fix a bug in read_close_session which return random status
745 thanks to James Harper
747 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
748 and directory names during restore of single file/directories.
749 kes Add sanity checks to .sql command when string is empty. Hopefully
750 that will resolve Dirks Director crash.
752 kes Apply patch submitted by Martin Simmons that corrects a seg fault
753 in the bsmtp chat subroutine when debug is >= 10.
755 kes Fix Director crash when running bat SQL queries.
756 kes Add David's notes on Item 8: Copy pools.
758 kes Rework projects file to be current and ready for a vote.
759 kes Enhance lex scanner error message.
761 kes Tweak LICENSE file to mention BSD code.
762 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
763 if specified on the ./configure.
764 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
765 This class is intended to allow us to open a second bsock to the
766 Director while in the restore subdialog.
768 kes Fix configure to create bat Makefile before creating dependencies.
769 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
770 kes Add a tooltip to the tray monitor.
771 dvl Set the Director's PID file before dropping privs. This fixes
774 kes Update AUTHORs file
775 kes Increase the default max concurrent jobs to 20 in FD and SD to
776 correspond with the default .conf files.
777 kes Rewrite the Win32 service routines. This eliminates the 3 copies
778 some different, of the same file created by RN when porting the
780 kes Rearrange some of the Win32 directories and the placement of the files
782 kes Set DEVELOPER flag in version.h
784 ========================================================================
785 Release Version 2.2.0
787 kes Apply a second doc patch from Marc.
788 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
789 improves the tips section that discusses how to setup multiple
792 kes Update bat README file.
793 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
794 corrects a typo in the Recycle status check in db_find_next_volume().
795 This will probably fix a number of annoying problems with multiple
797 kes Modify most of dird/msgchan.c to use bsock class calls rather than
798 bnet calls -- no functionality change.
800 kes Modify the Verify output to specify if files are missing on
801 the Volume(s) or disk. Fixes confusion in bug #916.
802 kes When more than one Volume is read in a migration job, the last
803 Volume bytes reported are from the last read volume rather than
804 the last written volume. Fixed. This fixes bug #910.
805 kes Fix display of Recycle flag after update volume=foo recycle=yes.
806 It previously printed New Recyle flag is: no. This fixes bug
809 kes Correct seg fault when switching tape drives during restore.
810 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
811 be used until after 2.2.0 release.
813 kes Remove fnmatch() in SD that permitted wild card specifications.
816 kes Fix %g in filename returned by SQL for browse tree reported by
818 kes Fix configure so that it puts config.out in the cwd rather than
820 kes Attempt to fix the locking problem reported by Eric in bug #906.
821 kes Make berrno class to leave errno unchanged after constructor call.
822 kes Make bnet_server use the heap rather than the stack to allocate
823 its socket fd pointers to avoid a crash at termination. Problem
824 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
826 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
827 and putting it in depkgs-qt along with Qt4.3.
829 kes Rework code in acquire.c that switches drives for reading when
830 the Media Type does not match. This should fix bug #906
832 ebl Fix a director segfault during job setup #907
833 kes Correct seg fault in postgresql when first operation returns no
834 rows. Fixes Dirks File browser problem seg fault with bat.
836 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
837 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
840 kes Implement PopUp YES/NO dialog for bat.
842 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
844 kes Correct RunScript to terminate job in FD on failure.
845 kes Change abort_on_error and AbortJobOnError to fail_on_error
846 and FailJobOnError in RunScripts.
847 kes Minor tweaks of code formating in RunScripts, principally to
848 avoid depassing 80 columns.
850 kes Eliminate one #ifdef Win32 in bsmtp
851 kes Implement grow tool to grow a file for testing very large databases.
852 kes Add big-vol-test to test Bacula seeking with > 5GB.
855 kes Modify find_next_volume() to return all values in Media record.
856 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
860 kes Update Release notes
862 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
863 Warning, in previous beta version, all media get from scratch keep their
866 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
867 This should fix bug #842. Made a note to look at removing the temp
868 files at the end of the install.
869 kes Add ability to mount and unmount a file device providing it is
870 marked as being removable and has the appropriate mount and unmount
871 commands defined in the Device resource. This fixes bug #830.
872 kes When applying a storage override, release all previous storage
873 definitions rather than just prepending the new storage.
874 This should prevent a good deal of confusion.
876 kes Implement ./configure search for qwt libraries.
878 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
879 Win32 FD. This should fix bug #893.
880 kes Remove an unnecessary beep in Win32 init code.
881 kes Update copyright dates in Win32 executable about boxes.
882 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
883 code with a BSD getopt.c and getopt.h.
884 kes Remove sched.h from the Win32 compat directory -- not used.
885 kes Remove the Exit menu item from the Win32 tray monitor. If you really
886 need to shut it down, do it through the services panel or the command
888 kes Remove some inappropriate Bacula FSFE copyrights.
889 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
890 kes Fix regress config non-portable test as pointed out by
891 Florian Heigl <florian.heigl@gmail.com>
892 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
893 as pointed out by Florian Heigl <florian.heigl@gmail.com>
895 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
896 Reported by Frank Sweetser.
900 kes Fix client-only build.
901 kes Integrate client-only fixes for bsys (initgroups) and conio from
902 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
903 kes Make arguments to get_scratch_volume() in same order as other
905 kes Rework the prune_volumes() subroutine so that after purging and
906 no volume found in desired pool, it will check for a scratch
907 volume. This prevents recycling the whole scratch pool.
908 kes Add code to status storage to print boffset_t (largefile support).
910 kes Move qwt (Graphics libarary for Qt4) to depkgs.
911 kes You now need a --with-qwt=<dir> to be able to build bat.
912 kes Update src/win32/cats/bacula_cats.def to include the new
913 db_get_query_dbids() call on Win32.
915 kes Correct a problem when selecting a scratch volume and moving
916 it to another pool that lost some columns.
917 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
918 kes Enhance Autochanger error messages to include Volume and device name.
919 kes Rework prune_volumes() code to take account of InChanger flag,
920 and to handle recycling volumes going to the Scratch pool and
921 current pool because the RecyclePool directive.
922 kes Implement a better and more efficient db_get_query_dbids() to
923 handle creating and passing back a list of DBIds.
927 kes Start work on new more efficient DBId subroutine. First use
928 will be for recycling volume to Scratch inchanger.
929 kes Increase number of JobIds in pruning from 1000 to 10000.
930 This to be replaced by above routine.
931 kes Begin implementation of building Qt4 on Win32.
932 kes Correct typo in fix I added for bad TLS shutdown.
933 kes Pull 2.0.3 patches into patches directory.
934 kes Update Release notes. Include qt-console in line count.
935 kes Update Projects file.
937 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
938 bug in migration code where a job that spanned two volumes
941 kes Implement new BST_DESPOOLING blocked state. Change from locking
942 during despooling in SD to blocking. This means that other threads
943 can work with the device structure, in particular the reservations
944 system while despooling.
946 kes Fix return in reservation message queue that missed clearing
947 the jcr lock (implemented 26Jun07 below).
948 kes Rename a number of dev methods to make locking function names
950 kes Document locking in lock.c. Move lock structures to new file
953 kes Move reservations message lock to lock jcr only this
955 kes Move main SD locking code into lock.c (new file).
956 kes Update Win32 build to include lock.c
960 kes Dirk committed the qwt library code for drawing graphs in bat.
961 kes Tweak install of qwt so that it is integrated with ./configure.
963 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
964 out by Eric (my typo).
965 ebl Fix configure.in to get batch mode enable
966 kes Return correct string from authenticate.cpp in bat when connecting
968 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
969 spurious line drops when using TLS.
970 kes Do not file reparse points when restoring a file that already
973 kes Implement Windows reparse points -- similar to directories, but
974 we do not descend into it. This is a first cut. They seem to
975 be backed up, but restore is not yet tested.
976 kes Remove restore_blocking in tls code when shutting a socket to leave
977 it in blocking mode. Hopefully this will fix the encryption bug
978 reported by Frank Sweetser.
979 kes When opening a file for backup, tell the OS that we are going to
980 read it sequentially -- optimization.
981 kes Change variable names in authenticate_director() to not conflict
982 with member names in bat. Caused great confusion with compiler,
985 kes Queue openssl error messages in case of comm problem.
986 kes Do shutdown() call if socket terminated.
987 kes Remove some duplicated code in tls.c
988 kes Move more of the bsock member variables into private and access
990 kes Add Frank Sweetser's tls-test to the regression suite.
992 kes Add Swedish sv.po file
994 kes Don't print clock skew message in FD if less than 3 seconds diff.
995 kes Add a bit of VSS info to status client.
996 kes Implement a first cut of Vista VSS, using Win2003 code.
1000 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1001 loaded tape but uses first drive).
1002 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1003 This was indeed a Win32 issue.
1005 kes Simplify search of autochanger for in-use Volume.
1006 kes Fix exit condition of check for in-use volume. kes Remove
1007 inappropriate my_postgresql_free_result() in db_close()
1009 kes Fix bad return in FD when encryption signature not found.
1010 Probably caused a crash.
1011 kes Inhibit missing encryption signature error messages for
1012 file types where no signature computed.
1013 kes Correct inverted check on autochanger in reservation system.
1014 kes Tweak debug code in autochanger reservation.
1016 kes Add some additional locking in the cats directory in subroutines
1017 that modify packet variables called from batch insert.
1018 kes Rework how dcrs are allocated. new_dcr() can now be called
1019 with an existing pointer, and it will simply clean it up.
1020 This allows the reservation system to test various different
1021 devices, and will permit easy device changes.
1022 kes A bunch of changes all over to handle new new_dcr() calling
1024 kes Work more on the Volume management in the SD. Remember Volumes
1025 for tape drives and for autochangers (even virtual disk changers).
1026 kes When looking at the Volume list to reserve a drive, handle
1027 autochanger names correctly by interating through the changer
1028 devices. Also call the Director to see if a Volume is suitable
1029 for the current job.
1030 kes Fix some bugs in bscan. Make sure all media records are written.
1031 Make sure that valid JobMedia records are written for disk files.
1032 Previously they were completely wrong.
1033 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1034 that the URLs don't change and so that the developers will all
1035 work off the same copy. Rebuild from scrach.
1036 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1038 Release: 2.1.18 beta
1040 kes Fix seg fault in FD from incorrect digest size.
1041 kes Fix argument to non-OpenSSL crypto.c subroutine.
1043 Release: 2.1.16 beta
1045 kes Remove a few malloc()s from the encryption code.
1046 kes Use the class calls to bsock in filed/backup.c and restore.c in
1047 place of the old bnet_xxx code.
1048 kes Implement code that does an on the fly calculation of the
1049 signing digest during restore of encrypted files. It makes
1050 a best guess at the algorithm, and if it is not correct, will
1051 then revert to the old code which reads the file after it is
1053 kes Implement at least one missing crypto stream in stream_to_ascii()
1054 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1055 #877 where a reload with bad syntax causes Dir to exit.
1057 Cut: 2.1.14 beta (not released)
1059 kes Do not free a volume on a tape drive until another volume is
1060 mounted and read, or the autochanger unloads the volume.
1061 This should help the SD re-use volumes that are already mounted,
1062 and should fix bug #886.
1063 kes Apply patch from user brettedgar that allows gnome2-console include
1064 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1065 kes Apply patch from Lucien Weller that fixes day of week calculation
1066 because of DST flag problem. Fixes bug #887.
1068 kes Move find_next_appendable_volume() to after acquiring a valid device
1069 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1071 kes Unable to reproduce bug 872. However added additional testing for
1073 kes Bug #874 resolved by documenting SQLite limitations.
1074 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1075 kes Bug #881 resolved by removing typo in mtx-changer script.
1076 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1077 approval. Added a link to the wiki on the web page, and implemented
1078 a backup from http://paramount.ind.wpi.edu
1080 kes Fix update allfrompool to pass pool name.
1082 kes Convert to pure GPL v2 license.
1083 kes Fix sscanf problems reported by Peter Buschman that caused
1084 a bus error on Solaris.
1085 kes Rework (simplify) the select prompt in bat.
1086 kes Move get_jobid_from_tid() into lib and create a
1088 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1089 should definitely fix the problem of lost error messages in the
1091 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1092 kes Eliminate tcpd.h from the project. Enclose the #include from the
1093 library with extern C ...
1094 kes Add print of signal name when a signal is trapped.
1096 Release: 2.1.12 beta
1098 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1100 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1101 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1102 makes SQLit3 run 30 times faster, though a bit less safe.
1103 kes Implement --with-batch-insert in configure and detection of thread
1104 safe libraries. It is on by default, but turned off if no thread
1105 safe library (e.g. SQLite 2) is available.
1107 kes Fix Bacula PostgreSQL buffer overruns.
1108 kes Do better checking for NULL results returned from PostgreSQL;
1109 implement retry for failed queries; clear results buffer after
1110 failed query. Hopefully this will correct the PostgreSQL failures.
1112 kes Implement algorithm to handle only one appendable volume with
1113 Prefer Mounted Volumes = no.
1114 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1115 returned from a query.
1116 kes Make volume lock recursive.
1117 kes Implement an additional volume reservation algorithm that
1118 starts by considering all reserved volumes then uses the
1119 old brute force algorithm of searching the resources to
1120 find a suitable device.
1121 kes Add new reservations debug code and refine the old code.
1122 kes Update the win32/dll/bacula.defs file.
1124 kes Tweak reservations algorithm to permit a few more cases, i.e.
1125 volume reserved, but on different drive, ...
1126 kes Enhance SD status to include Pool and Media Type for drive in a
1127 more readable format (a bit longer).
1128 kes Fix PostgreSQL double free.
1130 kes Minor refactoring of restore decryption code.
1131 kes Add code to smartall.c to detect double free of a buffer.
1133 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1134 so that bsmtp will create a correct email address (mailbox only).
1135 kes Modify 'memory' command so that the buffers are listed as 'In use'
1136 to avoid confusion with Orphaned buffers.
1137 kes I reworked the OpenSSL include/lib flags to be handled in
1138 the standard Bacula way, which should fix bug #863 concerning
1139 non-standard OpenSSL libraries.
1141 kes Implement Help Browser window for bat.
1142 kes Fix reload bug that reset StorageId to zero.
1144 kes Fix TLS #ifdefing when TLS turned off.
1145 kes Ensure that when labelling a tape with Slot=0 that InChanger
1147 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1149 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1150 add DISTINCT (required by PostgreSQL).
1151 kes Implement BSOCK authenticate_director() method. Eventually will
1152 authenicate all daemons.
1153 kes Move several more functions into the BSOCK class.
1155 kes Add code to tell the OS that we no longer need a cached
1156 file that we were reading. In findlib/bfile.c. Also,
1157 only cache files that we are reading. Thanks to
1158 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1159 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1160 kes Implement script to automatically generate cats and dll .def
1161 files for Win32 dll.
1162 kes Update README.mingw32 to include new .def file generation.
1163 kes Correct typo in UTF-8 error message as reported by:
1164 jhernandez <julianhernandez@gmail.com>
1165 kes Add additional sm_check() code on debug level 1.
1166 kes Set default debug level to 1.
1167 kes Trap SIGABRT in attempt to get traceback.
1169 kes Reduce bat connect timeout from 30 to 15 seconds.
1170 kes More restructuring and implementing BSOCK class in place of
1172 kes Remove a few unnecessary malloc() tests in crypto code.
1173 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1174 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1175 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1177 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1179 kes Fix Verify InitCatalog. The attributes were not pointing to the
1180 correct saved location.
1181 kes Implement message callback so that GUI is sure to get all
1182 daemon messages. Currently displayed in a dialog in bat.
1183 kes Ignore SIGUSR2 (Bacula timer) in bat.
1184 kes Apply regress patch from bug #859 to allow regress to work
1185 with Solaris compiler.
1187 kes Begin adding TLS support to bat.
1188 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1189 clean up lex.c and make it more readable.
1191 kes Move more bnet functions into the BSOCK class.
1192 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1193 kes Complete change of berrno strerror() method to bstrerror()
1195 Release: 2.1.10 beta
1197 kes Cleanup incorrect email addresses in bsmtp.
1198 kes Make bat display initial messages rather than discard them.
1200 kes First cut of adding .mod to the run command.
1201 kes Implement auto display of messages in bat.
1202 kes Enhanced preferences to allow all Bacula output to be
1205 kes Try to make bsmtp date routines more generic.
1206 kes Fixed bug #856 autochanger documentation.
1207 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1208 kes Add new cats entry point so Win32 builds.
1210 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1212 kes Do better checking for the MySQL 64 bit libraries looking for both
1213 .a and .so libraries.
1214 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1215 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1216 kes Require the thread safe version of MySQL during configure. Thanks
1217 to Andre Noll for pointing this out.
1218 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1219 continuing in migration code.
1220 kes Apply implementation of tray-monitor font derived from gnome-console
1221 submitted by Andreas Piesk <a.piesk@gmx.net>
1223 kes Eliminate important memory loss in SQLite
1224 kes Fixed the batch insert MySQL thread specific data that was not
1225 being freed. See cats/mysql.c:db_thread_cleanup().
1226 kes Fix restore before command.
1227 kes Convert old hdr.name to name() in a few places.
1228 kes Implement update jobid command.
1229 kes Return all time_t dates in db_get_job_record()
1230 kes Stop watchdog in SD earlier.
1231 kes Put Pool just after Storage in please mount message.
1232 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1235 kes Update the po files.
1236 kes Fix Verify InitCatalog by making it cache attributes.
1238 kes Change name bacula-bat to bat for man 1 page to correspond to
1240 kes Check for client and store NULL pointers in status command. This
1242 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1243 kes Fix sign extended editing of %p.
1244 kes Clean out a little old #ifdefing in cats/mysql.c
1246 kes If time diff between DIR and FD is more than 600 seconds convert
1247 INFO message to WARNING.
1248 kes Implement heap size display in status for all daemons.
1249 kes Attempt to fix MySQL db open memory loss (not successfull).
1250 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1251 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1252 Query. This looks like a MySQL but but by doing extra releases,
1253 the memory goes away. This should fix bug #847.
1255 kes When backup fails, cancel SD before waiting for sd termination.
1256 kes If SD is waiting for FD to connect during cancel, wake up the
1258 kes Fix fsf code so that errno is correctly reported.
1259 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1261 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1262 so that Bacula doesn't later stumble into a seg fault.
1263 kes Use the term Restore Client in the restore Job report.
1264 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1265 the original job's FileSetId.
1266 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1267 spooling in migration jobs. Not yet tested.
1268 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1269 reading conf file from a pipe. However, do it with open_bpipe()
1270 rather than popen. Not yet tested.
1272 kes Fix an ugly bug where the VolCatBytes were getting updated
1274 kes Implement bconsole memory command that prints current memory
1275 usage, plus smartalloc dump.
1276 kes Clarify some error messages in backup, admin, and migrate.
1277 kes Shrink label dialog to smaller size.
1278 kes Invert Cancel OK buttons on restore to be OK Cancel.
1279 kes More strerror() to bstrerror() conversions.
1281 kes Start implementing bstrerror() in place of strerror().
1282 kes Stripping path -- seems to work.
1284 kes Prevent door and port files from being restored (mostly
1286 kes Free an unreleased buffer in compat code.
1287 kes Change console Job name from *Console* to -Console- to eliminate
1288 Win32 filename problems. Put Win32 path separator when creating
1289 Console file. This fixes bug #846.
1290 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1292 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1294 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1295 to force Win32 error message.
1297 kes First cut strip path. The data should be passed to the FD,
1298 but nothing is done with it yet.
1299 kes Enhance the digest and signature routines in the crypto
1300 library to accept a JCR and to use it to print error messages
1301 so that they will go in the Job report rather than the daemon's
1303 kes Simplify some of the verify signature code.
1304 kes Simplify a few of the alternative returns in the signature
1307 ebl Use only POSIX regex instead of GNU regex in breg.c for
1308 File relocation. It fix broken freebsd compilation.
1309 kes Convert all other Dir files to use new ua class message
1311 kes Tentative fix for missing digest signature in bug 807.
1312 kes Correct handle problem in new win32_ftruncate routine.
1313 kes Convert ua_purge.c and ua_update.c to use new ua class
1314 message routines for bat.
1316 kes Correct incorrect installation of LICENSE in Win32 installer.
1317 kes Display LICENSE at the beginning of the Win32 install.
1318 kes Attempt to correct the need for the png files to be installed
1320 kes Reapply my bat.conf install script in qt-console. I think I
1321 editted bat.pro instead of bat.pro.in and it was lost.
1322 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1323 the /var/lock/subsys for subsysdir. Also corrects typos in the
1326 kes First cut update job.
1327 kes Correct configure to include qmake of src/qt-console directory.
1329 kes Make restore job yes/mod/no print in one command so GUI works.
1330 kes First cut implementing backup and restore client.
1331 kes Correct editing in Verify output that caused a seg fault.
1333 kes Insure that bat.conf is not overwritten during installation.
1334 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1335 while I was implementing migration in March 2006 !
1337 ebl Cleanup file relocation, using char *RegexWhere instead of
1338 char *where + bool where_use_regexp
1339 kes Update some manpages and add bat manpage.
1340 kes Make a first cut at converting bacula.spec.in for bwx-console
1342 kes Apply patch from John Goerzen to add hostname as fourth argument
1343 to make_catalog_backup script.
1344 kes Fix typos I introduced into bsmtp.c
1345 kes Make pm_strxxx() routines handle input of NULL pointer. This
1346 is to protect from NULL pointers returned from SQL databases.
1347 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1348 kes Add more debug to FIFO code -- fix fifo regression test.
1350 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1351 kes Add thread timer to bnet_connect() to break from OS if wait time
1354 kes Update Win32 build to include new files, new symbols, and
1356 kes Implement socket level heartbeat (tcp_keepidle)
1357 ebl Commit File relocation patch
1358 kes Make bat have 'make install' target.
1359 kes Warn during install if old gnome-console binary found.
1360 kes Warn during install if old wx-console binary found.
1361 kes Add -8 option to bsmtp command line to add content type utf-8.
1362 Fixes bug #809. (Character coding problem in bsmtp).
1363 kes If < is found in target (from, to, cc) then do not enclose the
1364 target in < > in bsmtp. Fixes bug #772 (malformed address).
1365 kes When printing certain items in dbcheck, stop after 300000.
1366 Fixes bug #822. (dbcheck loops).
1367 kes Incorrect status in Dir after waiting for mount with poll set.
1370 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1372 kes Print waiting to reserve a device every 5 mins.
1374 kes Don't call close_part in label.c if tape and relabel.
1375 kes Don't free volume if busy in close() -- should help with
1377 ebl Fix #824 RunScript bug (After script could be execute twice)
1378 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1379 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1380 Add a regression script to test RunScript
1382 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1385 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1386 deprecated. No additional bugs will be fixed, and they will be dropped
1387 in a future release (probably 2.4.0).
1388 kes Change name of wx-console to bwx-console to make it more Bacula
1390 kes Change the name of gnome-console to bgnome-console to make it
1393 kes Some time in March, a Feature Request with patch from Jorj Bauer
1394 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1396 The ability for the director to validate a Client (FD) CN against
1397 an arbitrary set of patterns rather than the hostname, with
1398 A new 'TLS Allowed CN' set of directives which are implemented
1399 in the Client resource. Then pattern matching is used in place
1400 of hostname matching against the Certificate's CN. As an example, we
1401 have certificates which (a) use a local CA, and (b) have a CN of the
1403 kes Add new/changed entry points to Win32 build
1404 kes Create unaccepted-projects for projects that are not accepted.
1405 kes Simplify locking in the reservations system.
1406 kes Add more debug code in reservations.
1407 kes Make sure error condition on reserving a volume is handled correctly.
1408 kes Correct handling of volume_in_use.
1409 kes Correct handling of initializing a device.
1410 kes Move handling of broadcasting releasing a device into release_device().
1411 kes Correct attaching dcr to dev so that it is only done if device
1412 is properly initiated.
1414 kes Locking debug level tweaks in SD.
1415 kes Tweak new Volume code.
1417 kes Add exec external-command [wait-seconds] to bconsole. This
1418 executes the external-command. Note! normally external-command
1419 should be enclosed in double quotes.
1420 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1421 it should normally be off in a production system.
1423 kes Implement die command for SD so that we can force it to dump.
1424 kes Implement SD lock debug code.
1425 kes Implement new algorithm for keeping Volume list in SD. It
1426 is now owned by the device.
1428 kes Implement new code for freeing in use volumes that should
1429 resolve if not all, some of the problems of multiple drive
1430 tape conflicts described in bug 801.
1432 kes Fix gui/bacula-web/images files in svn.
1433 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1435 ebl Fix a bug in batch mode (in string escape)
1436 kes Correct migration prune SQL typo that crept in in a
1437 recent 2.1.x change.
1439 kes Move bnet_despool() into class in bsock.c
1440 kes Modify job report to include director name and Build OS.
1441 kes Move drop root privilege and check_catalog() before fork.
1442 kes Add update database scripts (version 9 to 10) to updatedb directory.
1444 ebl Check size and age of each file after its backup to see if
1445 it has changed during backup, if 'checkfilechanges' is set.
1446 The FD will do an extra check (stat(2)) after
1447 each file backup. mtime, ctime and size are compared with
1448 'before backup' information. If time or size mismatch, an
1449 error message will be generated. You must upgrade FD to use it.
1451 kes Make database name and user configurable
1452 --with-db-name=xxx --with-db-user=xxx
1453 kes Add back database type to message.c for debugging.
1455 kes Implement dir_sql() which issues an SQL query.
1456 kes Modify bat medialist to use dir_sql() and do some minor C++
1457 formatting as well as eliminating a number of pointers, simplifing
1460 kes Fix some of the mtx-changer grep commands for tape label readers.
1461 kes Convert a number of bsendmsg into the appropriate send/warning/error
1462 message class calls.
1463 kes Suppress the using database message in the .sql command.
1464 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1466 kes Add context menu for floating a window.
1467 kes Some minor cleanup and name changes in qt-console
1468 kes Add doing mt setblk 0 in Win32 mtx-changer.
1469 kes Apply Martin's bug fix to move definition of ENODATA for
1471 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1472 sqlite2 and sqlite3.
1474 kes More pruning cleanup.
1475 kes Turn on wait_for_drive by default in mtx-changer.
1476 kes Turn on Batch insert code by default as it now passes regression.
1477 kes Add ./configure --enable-bat to enable building of Bat.
1478 No install yet though.
1480 kes Implement a new .sql command for bat.
1481 kes Implement code to turn off pruning in obtaining the next volume.
1482 Pruning is turned off for the status dir command, but turned on
1483 for SD requests and for the list nextvolume command.
1485 kes Correct Qmsg() that was not updated correctly when committing a
1486 previous change (probably the recent TLS patch).
1488 kes Write new subroutine is_volume_purged() that explicitly checks
1489 if the Volume is purged, and if so marks it as such. This should
1490 resolve problems reported about needing to mount twice to recycle
1492 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1493 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1494 amount of duplicated code.
1495 kes Do volume pruning only for the Media Type desired (reduces pruning time
1496 if multiple Media Types are in the same pool).
1497 kes Implement more detailed info in the Job report for the Bacula version
1499 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1501 ebl Add bbatch tool to bench database and insert mode.
1502 Fix sql quote stuff in batch mode
1503 Fix sql stuff for mysql
1505 kes Correct problems with am/pm scheduling. Fixes bug #808.
1506 kes Implement new prunning code that prunes up to 1000 jobs at
1507 the same time. The same technique can be applied to a number
1508 of other prune/purge subroutines.
1509 kes Add an insanity check when starting a new tape job to ensure
1510 that the tape position has not been changed. If so fail the
1512 kes Fix Win32 build for dlls to add the folllowing:
1513 src/lib/bsock.c -- new file with new entry points
1514 src/lib/dlist.c -- new entry points
1515 src/cats/sql_create.c -- new entry point
1516 src/cats/sql_cmds.c -- new DATA item exported
1518 ebl batch mode cleanup bscan-test is ok now.
1519 kes Implement SD code to check length of disk volume before appending.
1521 kes Correct return status on db_batch... routines.
1522 kes Add call to db_write_batch_file_records() to migration code.
1523 ebl Fix AfterJob timing
1524 kes Move the checking of the database in initializion of the Director
1525 to after we drop privileges. This avoids the need for both root
1526 and bacula access to the DB.
1527 kes Correct a misplaced variable definition in src/filed/backup.c
1528 kes Correct how the new batch insert db_create_attributes_record()
1529 uses the arguments. Caused a seg fault in bscan.
1530 kes Implement lock() and unlock() methods in DEVICE class.
1531 Implement block() and set_block(xx) methods in DEVICE class.
1532 kes Modify bnet_connect() so that it uses time() to check for the
1533 wait time expiring (on some OSes, some system calls may not
1534 return immediately).
1535 kes Modify Verify to obtain the previous JobId when it is actually
1536 running rather than at schedule time (as it was in 1.38.x).
1537 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1539 kes When checking pid in pid file, continue running if the pid is
1540 the same as ours. This occurs on IRIX after a system crash.
1543 kes Extend new GUI API.
1544 kes Make the ua structure a class, and implement send_msg(),
1545 error_msg(), warning_msg(), and info_msg().
1547 kes Apply fix from for building wx-console on the Mac from
1549 kes Implement new select mechanism for GUI programs.
1550 kes Reorganize initialization of stackedWidgets in bat.
1552 kes Add updated nagios plugin supplied by Christian Masopust.
1554 kes More bat implementation.
1555 kes File migrate bug with Pool Occupancy using mediaid instead
1556 of jobids. Fixes bug #795.
1557 kes Fix orphaned buffers in filed backup and verify due to
1558 crypto buffers not freed during errors. Fixes bug #789.
1559 kes Extend new GUI api code to tree commands.
1560 kes Ensure that tree and dot commands check console ACLs.
1561 kes Permit marking directory with trailing slash.
1562 kes Allow 20 console connections (instead of only 10).
1564 kes Add smartctl call to bacula-sd.conf as an example of getting
1567 kes Modify jobq.c to let simultaneous restore jobs run. This may
1568 cause them to fail if they cannot get a drive.
1569 kes Add Client Connect Wait to Storage daemon to permit users to
1570 modify the time the SD waits for a FD connection.
1572 kes Correct virtual changer check which was backwards. This caused
1573 volumes to be unloaded into slots already occupied.
1575 kes Apply Command ACL filter to JobId list in restore command.
1576 kes Correct typeo in var.c patch.
1578 kes Don't let Bacula prune File or Job records for the current Job.
1579 kes Fix variable substitution pad + inc bug reported (with patch)
1582 kes Correct SQLite log table index as reported by Luca Berra.
1584 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1586 kes Begin implementing new comm signals for API.
1587 kes Fix a few places in lib/message.c where the open fd may
1589 kes Continue implementing lib/bsock.c (real class). Make jcr,
1590 who, host, and port private. There are new methods to access
1591 them for non-class use. This required touching a number of files.
1593 kes Add LANG=C to autoconf/randpass so it works with languages other
1594 than English. Fixes bug #788.
1596 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1598 You will not be able to generate Include/Exclude list any more.
1599 It will be fixed soon.
1600 If you want to use this, you can apply
1601 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1603 kes Restore of sockets created false error messages because Bacula
1604 no longer restores sockets, but the code was still trying to
1605 set the attributes on a non-existent file. Reported by a user.
1606 ebl finish RecyclePool feature
1607 Media will takes Pool.RecyclePool
1608 when moving from Scratch to a Pool or when user will do
1609 update volume=xxx frompool
1610 To use it, add RecyclePool = aPool to your Pool resource
1613 RecyclePool = Scratch
1617 kes Expand new BSOCK class adding signal() and new BNET signals.
1618 kes Begin enhancing the dot commands adding a new API function
1619 that returns more information and will make it easier
1620 to interface to the Director from a program.
1622 kes Make DEVICE fd private. Its new name is m_fd, and can be
1623 obtained with dev->fd() outside the class. This is the
1624 first of many DEVICE members to be made private.
1625 kes Implement Michael Renner's idea on having a virtual disk
1626 changer. I made some minor modifications (e.g. I did not
1627 implement the Virtual Changer directive, but simply set
1628 the Changer Command to an empty string.
1630 kes Implement a BSOCK send() method that writes the whole record
1631 in a single write() request rather than in two.
1632 ebl add update volume=xxx recyclepool=yyyy
1633 volume takes recyclepool from pool when using update volume=xxx from pool
1635 kes Fix encryption deblocking bug, which caused some restored files
1636 to be truncated. This fixes bug #763.
1637 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1638 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1640 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1641 ebl Use btime_t instead of uint64_t in media patch.
1643 kes Optimize the use of the database a bit in the Status dir command.
1644 Only open it when needed, ensure that if any previous database
1645 was opened, it is closed.
1647 kes Correct VolCatBytes bug from media patch.
1648 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1649 in the case of orphaned records.
1650 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1651 and File records in 300K chunks to be more efficient. This
1652 idea came from Juan Luis Frances (if I remember right).
1653 kes Apply Eric's scratch patch that moves a purged Volume to
1654 the RecyclePool. Question: how is RecyclePool set? what
1655 happens to the ScratchPool?
1656 kes Apply Eric's media patch that collects read/write media
1657 times as well as byte counts. This patch requires a
1658 simultaneous upgrade of the DIR and SD. Note, there
1659 should be some way to turn off timing. I'm not sure
1660 times are in Bacula units.
1661 kes Apply Eric's batch-insert patch.
1663 kes Update projects list.
1665 kes Implement Include/Exclude file lists in FD as dlists using
1666 the new dlistString class. This permits efficiently having
1667 large include/exclude lists and completes project Item 25.
1668 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1669 console is authorized to cancel the job. This fixes bug
1671 kes Modify SD so that the VolCatJobs medium record is updated
1672 at the beginning of a Job rather than the end. This
1673 fixes bug #775 where exceeding MaxVolJobs caused jobs
1675 kes Added a mutex around getting and setting Volume information
1676 so that multiple simultaneous jobs will single thread.
1678 Switch to using Subversion
1679 kes Remove src/pygtk-console/ from configure
1681 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1682 plus the entrypoints.
1683 kes Apply patch supplied that corrects debug print
1684 in canceling jobs for max run time. Supplied as
1685 part of bug #621, which was previously fixed.
1687 kes Test on job_canceled() and sd_msg_thread_done inside
1688 loop starting the message thread to avoid a race condition.
1690 kes Remove rl_catch_signal from console.c as it conflicted
1691 with the header definition. Fixes bug #765.
1692 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1694 kes Clarify some stored/acquire messages to indicate if the
1695 problem is with read or append.
1697 kes Fix memory leak with storage ids in cats/sql_get.c
1698 kes Terminate watchdog earlier to avoid reference to released
1699 memory -- reported by Jason Austin.
1700 kes Move closing the database from jobq.c to the director daemon
1701 termination routine. This fixes memory leaks for shadow jobs
1702 (i.e. migration jobs).
1703 kes Free up the unique jobid chain items in migrate.c. This fixes
1704 a memory leak problem.
1705 kes Convert some ugly looking for statements to use foreach_alist
1706 in findlib/find.c. This will facilitate converting the structures
1707 to use dlist (for large include/exclude lists).
1708 kes Fix a bug in the btree.c and btree.h routines, then rename them
1709 rblist and add them to be built in src/lib. Include some new
1710 methods written by Rudolf Cejka that make the code more readable
1711 (hides some of the ugly casting).
1712 kes Add set_next() and set_prev() methods which make the code much more
1713 readable. Also add a new dlistString class that facilitates storing
1714 strings in dlists. To be used in the large include/exclude lists.
1715 kes Make some trivial modifications to lib/tree.h that use rblist
1716 rather than dlist for storing the tree links. This was suggested
1717 by Rudolf Cejka. The result of this is that the restore tree now
1718 uses red-black binary trees rather than simple linked lists. This
1719 should give rather dramatic speed improvements for directories
1720 contining large numbers of directories/files (more than 10000).
1722 kes Fix maxruntime bug #621.
1724 ebl Implement the include JobID in spool file name project.
1725 kes Reorder projects file in order determined by Jan 2007 vote.
1726 kes Implement item #12 on project list -- quick release of FD by
1728 kes Fix open of SQLite3 db where user does not have write permission
1729 so that DIR does not crash. Fixes bug #761.
1731 kes Add back missing @ in Win32 Makefile.
1732 kes Change 'Device not configured to autolabel' from INFO
1734 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1735 which should restart an indefinite # of times.
1736 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1737 other DIR specifications.
1739 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1740 Fix path quoting in SQLite scripts.
1741 Fix problems with SHGetFolderPath.
1743 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1745 kes Fix Job restart on error bug that promotes an Inc to a Full
1746 backup. This should fix bug #755.
1747 kes Add qt-console and first cut of code.
1751 kes Fix Bacula->Documentation link on Win32 to point to index.html
1752 instead of bacula.html. Fixed bug #750.
1753 kes Return JobId in db_get_job_record() when JobId==0. This should
1755 kes Do not release source pointers when restarting a failed job.
1757 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1758 This *should* fix bug #747.
1759 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1762 kes Modify USTORE constructor to set an empty store_source string,
1763 and don't copy the store_source string in a cancel. Hopefully
1764 this will fix Arno's seg fault, bug #744.
1765 kes Add back code to disable conio in configure. Fixes bug #743.
1766 kes Correct the Options scanner in the FD to correctly handle
1767 SHA1 option, which was eating the next option. Reported by
1769 kes Add code to indicate when the SD is spooling, spool wait, and
1770 despooling as requested by Alan Brown.
1772 Version 2.0.0 released: 4 January 2007