1 Technical notes on version 2.3
5 kes Add missed return in fixing verify bug -- trunk only.
6 ebl Fix a command parser issue causing a director segfault.
7 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
9 kes Increase the max block size to 4MB fixes bug #957.
10 kes ERABT if user sets min block size > max block size. Fixes bug #956.
11 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
12 is not properly mounted (recognized) during a poll.
13 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
14 Job that has differences reports Verify OK.
15 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
17 ebl Add an option to operate on all pools with update vol parameters.
18 This complete the project 20. Patch from Nigel Stepp.
19 ebl Add history support to bconsole when using readline.
20 Using Ctrl-D to exit doesn't update .bconsole_history
21 kes Modify new volume algorithm to use max MediaId for generating next
22 volume number rather than the count of Volumes. This should essentially
23 eliminate the failure rate if some volumes were deleted. Bug #921.
24 kes Begin implemention of Optimize Job Scheduling.
25 kes Implement restore callback that Dirk and I agreed on for bat
26 restore. This fixes bug #928. Restore of backup of zero files fails.
27 kes Fix SQL Catalog logging which broke with new db_escape_string
30 kes Fix bacula_cats.def for new db_escape_string().
31 kes Increase size of name string when FD making connection to SD.
32 May fix bug #953. FD->SD connection failure.
34 kes Add code to help Dan debug 2drive-incremental-2disk test.
35 kes Add code to try to fix bug #908.
36 kes Add waits to multiple exit detection code to try to force pid
37 file to always be deleted.
38 kes Restore good dev.tar.gz to rescue set appropriate binary property.
40 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
41 trying to switch drives by checking for blocking before unblocking.
43 kes Cancel storage daemon in all cases where FD reports error. This
44 should fix virtually all cases of bug #920.
45 kes Fix db_escape_string() for MySQL which did not compile.
47 kes Fix error message that was clobbered when Dir tells SD it does not
48 have write permission on Volume. This should fix a minor point
49 in bug #942, but not the main problem.
50 kes Add code to cancel job in SD if FD connection fails. This should
52 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
53 dvl Pass jcr and db into db_escape_string() to enable better escaping
55 kes Fix migration code to get correct Volume name with multiple volumes
56 by skipping |. Fixes bug #936.
57 kes Implement patch supplied by Landon to fix bug #944 where using
58 TLS with bconsole uses 99+% of the CPU.
59 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
61 kes Move patches into patches directory.
63 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
66 ebl Using "m" in bconsole will show messages like before,
68 kes Fix bug #935, and probably also bug #903 where files were not
69 restored. MediaId was not properly set in JobMedia record after
72 kes Suppress chown and chmod error messages if the FD is not running
75 kes Apply Martin Simmons' patch that should turn off the new API usage
76 when batch insert is turned off allowing building on older
78 kes Add ./configure search in qwt-qt4 for qwt package
80 kes Bacula is now free of 3rd party GPL copyrighted code!
82 kes Add guid_to_name.c/h which replace idcache.
83 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
85 ebl Detect if new PosgreSQL batch insert API is present.
86 kes Correct incorrect mempool call causing Director crash. Occurs on
87 systems without va_copy().
88 sb Update spec files for 2.2.1 release
90 kes Fix memory pool call in ua_output.c. bug #934.
91 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
92 Add test program to fnmatch.c
94 kes Integrate patch to README.vc8 from
95 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
96 edit it to get it into Unix patch format.
97 kes Implement mkpath.c to replace old FSF makepath.c
99 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
101 Release Version 2.2.1
103 kes Update POTFILES.in
104 kes Cleanup a few underquoted AC_DEFUNs in configure
105 kes Apply patch from Martin Simmons that adds a test for va_copy to
108 kes Fix bug #921 by increasing the number of tries to create a new volume
110 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
111 can be called multiple times. Implement a version for machines
112 without va_copy() that gets a big buffer.
114 kes Integrate more portable zone offset code into bsmtp.c
115 Submitted by Attila Fülöp.
117 kes Fix bad SD->FD return status reported by
118 (James Harper) <james.harper@bendigoit.com.au>
119 ebl Fix a bug in read_close_session which return random status
120 thanks to James Harper
122 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
123 and directory names during restore of single file/directories.
124 kes Add sanity checks to .sql command when string is empty. Hopefully
125 that will resolve Dirks Director crash.
127 kes Apply patch submitted by Martin Simmons that corrects a seg fault
128 in the bsmtp chat subroutine when debug is >= 10.
130 kes Fix Director crash when running bat SQL queries.
131 kes Add David's notes on Item 8: Copy pools.
133 kes Rework projects file to be current and ready for a vote.
134 kes Enhance lex scanner error message.
136 kes Tweak LICENSE file to mention BSD code.
137 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
138 if specified on the ./configure.
139 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
140 This class is intended to allow us to open a second bsock to the
141 Director while in the restore subdialog.
143 kes Fix configure to create bat Makefile before creating dependencies.
144 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
145 kes Add a tooltip to the tray monitor.
146 dvl Set the Director's PID file before dropping privs. This fixes
149 kes Update AUTHORs file
150 kes Increase the default max concurrent jobs to 20 in FD and SD to
151 correspond with the default .conf files.
152 kes Rewrite the Win32 service routines. This eliminates the 3 copies
153 some different, of the same file created by RN when porting the
155 kes Rearrange some of the Win32 directories and the placement of the files
157 kes Set DEVELOPER flag in version.h
159 ========================================================================
160 Release Version 2.2.0
162 kes Apply a second doc patch from Marc.
163 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
164 improves the tips section that discusses how to setup multiple
167 kes Update bat README file.
168 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
169 corrects a typo in the Recycle status check in db_find_next_volume().
170 This will probably fix a number of annoying problems with multiple
172 kes Modify most of dird/msgchan.c to use bsock class calls rather than
173 bnet calls -- no functionality change.
175 kes Modify the Verify output to specify if files are missing on
176 the Volume(s) or disk. Fixes confusion in bug #916.
177 kes When more than one Volume is read in a migration job, the last
178 Volume bytes reported are from the last read volume rather than
179 the last written volume. Fixed. This fixes bug #910.
180 kes Fix display of Recycle flag after update volume=foo recycle=yes.
181 It previously printed New Recyle flag is: no. This fixes bug
184 kes Correct seg fault when switching tape drives during restore.
185 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
186 be used until after 2.2.0 release.
188 kes Remove fnmatch() in SD that permitted wild card specifications.
191 kes Fix %g in filename returned by SQL for browse tree reported by
193 kes Fix configure so that it puts config.out in the cwd rather than
195 kes Attempt to fix the locking problem reported by Eric in bug #906.
196 kes Make berrno class to leave errno unchanged after constructor call.
197 kes Make bnet_server use the heap rather than the stack to allocate
198 its socket fd pointers to avoid a crash at termination. Problem
199 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
201 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
202 and putting it in depkgs-qt along with Qt4.3.
204 kes Rework code in acquire.c that switches drives for reading when
205 the Media Type does not match. This should fix bug #906
207 ebl Fix a director segfault during job setup #907
208 kes Correct seg fault in postgresql when first operation returns no
209 rows. Fixes Dirks File browser problem seg fault with bat.
211 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
212 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
215 kes Implement PopUp YES/NO dialog for bat.
217 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
219 kes Correct RunScript to terminate job in FD on failure.
220 kes Change abort_on_error and AbortJobOnError to fail_on_error
221 and FailJobOnError in RunScripts.
222 kes Minor tweaks of code formating in RunScripts, principally to
223 avoid depassing 80 columns.
225 kes Eliminate one #ifdef Win32 in bsmtp
226 kes Implement grow tool to grow a file for testing very large databases.
227 kes Add big-vol-test to test Bacula seeking with > 5GB.
230 kes Modify find_next_volume() to return all values in Media record.
231 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
235 kes Update Release notes
237 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
238 Warning, in previous beta version, all media get from scratch keep their
241 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
242 This should fix bug #842. Made a note to look at removing the temp
243 files at the end of the install.
244 kes Add ability to mount and unmount a file device providing it is
245 marked as being removable and has the appropriate mount and unmount
246 commands defined in the Device resource. This fixes bug #830.
247 kes When applying a storage override, release all previous storage
248 definitions rather than just prepending the new storage.
249 This should prevent a good deal of confusion.
251 kes Implement ./configure search for qwt libraries.
253 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
254 Win32 FD. This should fix bug #893.
255 kes Remove an unnecessary beep in Win32 init code.
256 kes Update copyright dates in Win32 executable about boxes.
257 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
258 code with a BSD getopt.c and getopt.h.
259 kes Remove sched.h from the Win32 compat directory -- not used.
260 kes Remove the Exit menu item from the Win32 tray monitor. If you really
261 need to shut it down, do it through the services panel or the command
263 kes Remove some inappropriate Bacula FSFE copyrights.
264 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
265 kes Fix regress config non-portable test as pointed out by
266 Florian Heigl <florian.heigl@gmail.com>
267 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
268 as pointed out by Florian Heigl <florian.heigl@gmail.com>
270 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
271 Reported by Frank Sweetser.
275 kes Fix client-only build.
276 kes Integrate client-only fixes for bsys (initgroups) and conio from
277 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
278 kes Make arguments to get_scratch_volume() in same order as other
280 kes Rework the prune_volumes() subroutine so that after purging and
281 no volume found in desired pool, it will check for a scratch
282 volume. This prevents recycling the whole scratch pool.
283 kes Add code to status storage to print boffset_t (largefile support).
285 kes Move qwt (Graphics libarary for Qt4) to depkgs.
286 kes You now need a --with-qwt=<dir> to be able to build bat.
287 kes Update src/win32/cats/bacula_cats.def to include the new
288 db_get_query_dbids() call on Win32.
290 kes Correct a problem when selecting a scratch volume and moving
291 it to another pool that lost some columns.
292 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
293 kes Enhance Autochanger error messages to include Volume and device name.
294 kes Rework prune_volumes() code to take account of InChanger flag,
295 and to handle recycling volumes going to the Scratch pool and
296 current pool because the RecyclePool directive.
297 kes Implement a better and more efficient db_get_query_dbids() to
298 handle creating and passing back a list of DBIds.
302 kes Start work on new more efficient DBId subroutine. First use
303 will be for recycling volume to Scratch inchanger.
304 kes Increase number of JobIds in pruning from 1000 to 10000.
305 This to be replaced by above routine.
306 kes Begin implementation of building Qt4 on Win32.
307 kes Correct typo in fix I added for bad TLS shutdown.
308 kes Pull 2.0.3 patches into patches directory.
309 kes Update Release notes. Include qt-console in line count.
310 kes Update Projects file.
312 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
313 bug in migration code where a job that spanned two volumes
316 kes Implement new BST_DESPOOLING blocked state. Change from locking
317 during despooling in SD to blocking. This means that other threads
318 can work with the device structure, in particular the reservations
319 system while despooling.
321 kes Fix return in reservation message queue that missed clearing
322 the jcr lock (implemented 26Jun07 below).
323 kes Rename a number of dev methods to make locking function names
325 kes Document locking in lock.c. Move lock structures to new file
328 kes Move reservations message lock to lock jcr only this
330 kes Move main SD locking code into lock.c (new file).
331 kes Update Win32 build to include lock.c
335 kes Dirk committed the qwt library code for drawing graphs in bat.
336 kes Tweak install of qwt so that it is integrated with ./configure.
338 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
339 out by Eric (my typo).
340 ebl Fix configure.in to get batch mode enable
341 kes Return correct string from authenticate.cpp in bat when connecting
343 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
344 spurious line drops when using TLS.
345 kes Do not file reparse points when restoring a file that already
348 kes Implement Windows reparse points -- similar to directories, but
349 we do not descend into it. This is a first cut. They seem to
350 be backed up, but restore is not yet tested.
351 kes Remove restore_blocking in tls code when shutting a socket to leave
352 it in blocking mode. Hopefully this will fix the encryption bug
353 reported by Frank Sweetser.
354 kes When opening a file for backup, tell the OS that we are going to
355 read it sequentially -- optimization.
356 kes Change variable names in authenticate_director() to not conflict
357 with member names in bat. Caused great confusion with compiler,
360 kes Queue openssl error messages in case of comm problem.
361 kes Do shutdown() call if socket terminated.
362 kes Remove some duplicated code in tls.c
363 kes Move more of the bsock member variables into private and access
365 kes Add Frank Sweetser's tls-test to the regression suite.
367 kes Add Swedish sv.po file
369 kes Don't print clock skew message in FD if less than 3 seconds diff.
370 kes Add a bit of VSS info to status client.
371 kes Implement a first cut of Vista VSS, using Win2003 code.
375 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
376 loaded tape but uses first drive).
377 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
378 This was indeed a Win32 issue.
380 kes Simplify search of autochanger for in-use Volume.
381 kes Fix exit condition of check for in-use volume. kes Remove
382 inappropriate my_postgresql_free_result() in db_close()
384 kes Fix bad return in FD when encryption signature not found.
385 Probably caused a crash.
386 kes Inhibit missing encryption signature error messages for
387 file types where no signature computed.
388 kes Correct inverted check on autochanger in reservation system.
389 kes Tweak debug code in autochanger reservation.
391 kes Add some additional locking in the cats directory in subroutines
392 that modify packet variables called from batch insert.
393 kes Rework how dcrs are allocated. new_dcr() can now be called
394 with an existing pointer, and it will simply clean it up.
395 This allows the reservation system to test various different
396 devices, and will permit easy device changes.
397 kes A bunch of changes all over to handle new new_dcr() calling
399 kes Work more on the Volume management in the SD. Remember Volumes
400 for tape drives and for autochangers (even virtual disk changers).
401 kes When looking at the Volume list to reserve a drive, handle
402 autochanger names correctly by interating through the changer
403 devices. Also call the Director to see if a Volume is suitable
405 kes Fix some bugs in bscan. Make sure all media records are written.
406 Make sure that valid JobMedia records are written for disk files.
407 Previously they were completely wrong.
408 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
409 that the URLs don't change and so that the developers will all
410 work off the same copy. Rebuild from scrach.
411 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
415 kes Fix seg fault in FD from incorrect digest size.
416 kes Fix argument to non-OpenSSL crypto.c subroutine.
420 kes Remove a few malloc()s from the encryption code.
421 kes Use the class calls to bsock in filed/backup.c and restore.c in
422 place of the old bnet_xxx code.
423 kes Implement code that does an on the fly calculation of the
424 signing digest during restore of encrypted files. It makes
425 a best guess at the algorithm, and if it is not correct, will
426 then revert to the old code which reads the file after it is
428 kes Implement at least one missing crypto stream in stream_to_ascii()
429 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
430 #877 where a reload with bad syntax causes Dir to exit.
432 Cut: 2.1.14 beta (not released)
434 kes Do not free a volume on a tape drive until another volume is
435 mounted and read, or the autochanger unloads the volume.
436 This should help the SD re-use volumes that are already mounted,
437 and should fix bug #886.
438 kes Apply patch from user brettedgar that allows gnome2-console include
439 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
440 kes Apply patch from Lucien Weller that fixes day of week calculation
441 because of DST flag problem. Fixes bug #887.
443 kes Move find_next_appendable_volume() to after acquiring a valid device
444 in reserve.c. This fixes bug #864 -- confirmed by reporter.
446 kes Unable to reproduce bug 872. However added additional testing for
448 kes Bug #874 resolved by documenting SQLite limitations.
449 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
450 kes Bug #881 resolved by removing typo in mtx-changer script.
451 kes Made Frank Sweetser's wiki the official Bacula wiki with his
452 approval. Added a link to the wiki on the web page, and implemented
453 a backup from http://paramount.ind.wpi.edu
455 kes Fix update allfrompool to pass pool name.
457 kes Convert to pure GPL v2 license.
458 kes Fix sscanf problems reported by Peter Buschman that caused
459 a bus error on Solaris.
460 kes Rework (simplify) the select prompt in bat.
461 kes Move get_jobid_from_tid() into lib and create a
463 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
464 should definitely fix the problem of lost error messages in the
466 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
467 kes Eliminate tcpd.h from the project. Enclose the #include from the
468 library with extern C ...
469 kes Add print of signal name when a signal is trapped.
473 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
475 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
476 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
477 makes SQLit3 run 30 times faster, though a bit less safe.
478 kes Implement --with-batch-insert in configure and detection of thread
479 safe libraries. It is on by default, but turned off if no thread
480 safe library (e.g. SQLite 2) is available.
482 kes Fix Bacula PostgreSQL buffer overruns.
483 kes Do better checking for NULL results returned from PostgreSQL;
484 implement retry for failed queries; clear results buffer after
485 failed query. Hopefully this will correct the PostgreSQL failures.
487 kes Implement algorithm to handle only one appendable volume with
488 Prefer Mounted Volumes = no.
489 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
490 returned from a query.
491 kes Make volume lock recursive.
492 kes Implement an additional volume reservation algorithm that
493 starts by considering all reserved volumes then uses the
494 old brute force algorithm of searching the resources to
495 find a suitable device.
496 kes Add new reservations debug code and refine the old code.
497 kes Update the win32/dll/bacula.defs file.
499 kes Tweak reservations algorithm to permit a few more cases, i.e.
500 volume reserved, but on different drive, ...
501 kes Enhance SD status to include Pool and Media Type for drive in a
502 more readable format (a bit longer).
503 kes Fix PostgreSQL double free.
505 kes Minor refactoring of restore decryption code.
506 kes Add code to smartall.c to detect double free of a buffer.
508 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
509 so that bsmtp will create a correct email address (mailbox only).
510 kes Modify 'memory' command so that the buffers are listed as 'In use'
511 to avoid confusion with Orphaned buffers.
512 kes I reworked the OpenSSL include/lib flags to be handled in
513 the standard Bacula way, which should fix bug #863 concerning
514 non-standard OpenSSL libraries.
516 kes Implement Help Browser window for bat.
517 kes Fix reload bug that reset StorageId to zero.
519 kes Fix TLS #ifdefing when TLS turned off.
520 kes Ensure that when labelling a tape with Slot=0 that InChanger
522 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
524 kes Add StartTime to final uar_sel_jobid_temp query so that we can
525 add DISTINCT (required by PostgreSQL).
526 kes Implement BSOCK authenticate_director() method. Eventually will
527 authenicate all daemons.
528 kes Move several more functions into the BSOCK class.
530 kes Add code to tell the OS that we no longer need a cached
531 file that we were reading. In findlib/bfile.c. Also,
532 only cache files that we are reading. Thanks to
533 Tobias Oetiker <tobi@oetiker.ch> for the idea.
534 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
535 kes Implement script to automatically generate cats and dll .def
537 kes Update README.mingw32 to include new .def file generation.
538 kes Correct typo in UTF-8 error message as reported by:
539 jhernandez <julianhernandez@gmail.com>
540 kes Add additional sm_check() code on debug level 1.
541 kes Set default debug level to 1.
542 kes Trap SIGABRT in attempt to get traceback.
544 kes Reduce bat connect timeout from 30 to 15 seconds.
545 kes More restructuring and implementing BSOCK class in place of
547 kes Remove a few unnecessary malloc() tests in crypto code.
548 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
549 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
550 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
552 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
554 kes Fix Verify InitCatalog. The attributes were not pointing to the
555 correct saved location.
556 kes Implement message callback so that GUI is sure to get all
557 daemon messages. Currently displayed in a dialog in bat.
558 kes Ignore SIGUSR2 (Bacula timer) in bat.
559 kes Apply regress patch from bug #859 to allow regress to work
560 with Solaris compiler.
562 kes Begin adding TLS support to bat.
563 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
564 clean up lex.c and make it more readable.
566 kes Move more bnet functions into the BSOCK class.
567 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
568 kes Complete change of berrno strerror() method to bstrerror()
572 kes Cleanup incorrect email addresses in bsmtp.
573 kes Make bat display initial messages rather than discard them.
575 kes First cut of adding .mod to the run command.
576 kes Implement auto display of messages in bat.
577 kes Enhanced preferences to allow all Bacula output to be
580 kes Try to make bsmtp date routines more generic.
581 kes Fixed bug #856 autochanger documentation.
582 kes Rework bsmtp date editing for Win32. This fixes bug #854.
583 kes Add new cats entry point so Win32 builds.
585 kes Attempt to fix bsmtp date editing on OSes without %z editing.
587 kes Do better checking for the MySQL 64 bit libraries looking for both
588 .a and .so libraries.
589 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
590 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
591 kes Require the thread safe version of MySQL during configure. Thanks
592 to Andre Noll for pointing this out.
593 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
594 continuing in migration code.
595 kes Apply implementation of tray-monitor font derived from gnome-console
596 submitted by Andreas Piesk <a.piesk@gmx.net>
598 kes Eliminate important memory loss in SQLite
599 kes Fixed the batch insert MySQL thread specific data that was not
600 being freed. See cats/mysql.c:db_thread_cleanup().
601 kes Fix restore before command.
602 kes Convert old hdr.name to name() in a few places.
603 kes Implement update jobid command.
604 kes Return all time_t dates in db_get_job_record()
605 kes Stop watchdog in SD earlier.
606 kes Put Pool just after Storage in please mount message.
607 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
610 kes Update the po files.
611 kes Fix Verify InitCatalog by making it cache attributes.
613 kes Change name bacula-bat to bat for man 1 page to correspond to
615 kes Check for client and store NULL pointers in status command. This
617 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
618 kes Fix sign extended editing of %p.
619 kes Clean out a little old #ifdefing in cats/mysql.c
621 kes If time diff between DIR and FD is more than 600 seconds convert
622 INFO message to WARNING.
623 kes Implement heap size display in status for all daemons.
624 kes Attempt to fix MySQL db open memory loss (not successfull).
625 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
626 kes Eliminate memory loss in MySQL (possibly other SQLs) during
627 Query. This looks like a MySQL but but by doing extra releases,
628 the memory goes away. This should fix bug #847.
630 kes When backup fails, cancel SD before waiting for sd termination.
631 kes If SD is waiting for FD to connect during cancel, wake up the
633 kes Fix fsf code so that errno is correctly reported.
634 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
636 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
637 so that Bacula doesn't later stumble into a seg fault.
638 kes Use the term Restore Client in the restore Job report.
639 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
640 the original job's FileSetId.
641 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
642 spooling in migration jobs. Not yet tested.
643 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
644 reading conf file from a pipe. However, do it with open_bpipe()
645 rather than popen. Not yet tested.
647 kes Fix an ugly bug where the VolCatBytes were getting updated
649 kes Implement bconsole memory command that prints current memory
650 usage, plus smartalloc dump.
651 kes Clarify some error messages in backup, admin, and migrate.
652 kes Shrink label dialog to smaller size.
653 kes Invert Cancel OK buttons on restore to be OK Cancel.
654 kes More strerror() to bstrerror() conversions.
656 kes Start implementing bstrerror() in place of strerror().
657 kes Stripping path -- seems to work.
659 kes Prevent door and port files from being restored (mostly
661 kes Free an unreleased buffer in compat code.
662 kes Change console Job name from *Console* to -Console- to eliminate
663 Win32 filename problems. Put Win32 path separator when creating
664 Console file. This fixes bug #846.
665 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
667 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
669 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
670 to force Win32 error message.
672 kes First cut strip path. The data should be passed to the FD,
673 but nothing is done with it yet.
674 kes Enhance the digest and signature routines in the crypto
675 library to accept a JCR and to use it to print error messages
676 so that they will go in the Job report rather than the daemon's
678 kes Simplify some of the verify signature code.
679 kes Simplify a few of the alternative returns in the signature
682 ebl Use only POSIX regex instead of GNU regex in breg.c for
683 File relocation. It fix broken freebsd compilation.
684 kes Convert all other Dir files to use new ua class message
686 kes Tentative fix for missing digest signature in bug 807.
687 kes Correct handle problem in new win32_ftruncate routine.
688 kes Convert ua_purge.c and ua_update.c to use new ua class
689 message routines for bat.
691 kes Correct incorrect installation of LICENSE in Win32 installer.
692 kes Display LICENSE at the beginning of the Win32 install.
693 kes Attempt to correct the need for the png files to be installed
695 kes Reapply my bat.conf install script in qt-console. I think I
696 editted bat.pro instead of bat.pro.in and it was lost.
697 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
698 the /var/lock/subsys for subsysdir. Also corrects typos in the
701 kes First cut update job.
702 kes Correct configure to include qmake of src/qt-console directory.
704 kes Make restore job yes/mod/no print in one command so GUI works.
705 kes First cut implementing backup and restore client.
706 kes Correct editing in Verify output that caused a seg fault.
708 kes Insure that bat.conf is not overwritten during installation.
709 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
710 while I was implementing migration in March 2006 !
712 ebl Cleanup file relocation, using char *RegexWhere instead of
713 char *where + bool where_use_regexp
714 kes Update some manpages and add bat manpage.
715 kes Make a first cut at converting bacula.spec.in for bwx-console
717 kes Apply patch from John Goerzen to add hostname as fourth argument
718 to make_catalog_backup script.
719 kes Fix typos I introduced into bsmtp.c
720 kes Make pm_strxxx() routines handle input of NULL pointer. This
721 is to protect from NULL pointers returned from SQL databases.
722 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
723 kes Add more debug to FIFO code -- fix fifo regression test.
725 kes Implement posix_fadvise in FD, and for reading spool files in SD.
726 kes Add thread timer to bnet_connect() to break from OS if wait time
729 kes Update Win32 build to include new files, new symbols, and
731 kes Implement socket level heartbeat (tcp_keepidle)
732 ebl Commit File relocation patch
733 kes Make bat have 'make install' target.
734 kes Warn during install if old gnome-console binary found.
735 kes Warn during install if old wx-console binary found.
736 kes Add -8 option to bsmtp command line to add content type utf-8.
737 Fixes bug #809. (Character coding problem in bsmtp).
738 kes If < is found in target (from, to, cc) then do not enclose the
739 target in < > in bsmtp. Fixes bug #772 (malformed address).
740 kes When printing certain items in dbcheck, stop after 300000.
741 Fixes bug #822. (dbcheck loops).
742 kes Incorrect status in Dir after waiting for mount with poll set.
745 kes Extend idea of Prefer Mounted Volumes to mean a volume about
747 kes Print waiting to reserve a device every 5 mins.
749 kes Don't call close_part in label.c if tape and relabel.
750 kes Don't free volume if busy in close() -- should help with
752 ebl Fix #824 RunScript bug (After script could be execute twice)
753 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
754 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
755 Add a regression script to test RunScript
757 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
760 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
761 deprecated. No additional bugs will be fixed, and they will be dropped
762 in a future release (probably 2.4.0).
763 kes Change name of wx-console to bwx-console to make it more Bacula
765 kes Change the name of gnome-console to bgnome-console to make it
768 kes Some time in March, a Feature Request with patch from Jorj Bauer
769 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
771 The ability for the director to validate a Client (FD) CN against
772 an arbitrary set of patterns rather than the hostname, with
773 A new 'TLS Allowed CN' set of directives which are implemented
774 in the Client resource. Then pattern matching is used in place
775 of hostname matching against the Certificate's CN. As an example, we
776 have certificates which (a) use a local CA, and (b) have a CN of the
778 kes Add new/changed entry points to Win32 build
779 kes Create unaccepted-projects for projects that are not accepted.
780 kes Simplify locking in the reservations system.
781 kes Add more debug code in reservations.
782 kes Make sure error condition on reserving a volume is handled correctly.
783 kes Correct handling of volume_in_use.
784 kes Correct handling of initializing a device.
785 kes Move handling of broadcasting releasing a device into release_device().
786 kes Correct attaching dcr to dev so that it is only done if device
787 is properly initiated.
789 kes Locking debug level tweaks in SD.
790 kes Tweak new Volume code.
792 kes Add exec external-command [wait-seconds] to bconsole. This
793 executes the external-command. Note! normally external-command
794 should be enclosed in double quotes.
795 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
796 it should normally be off in a production system.
798 kes Implement die command for SD so that we can force it to dump.
799 kes Implement SD lock debug code.
800 kes Implement new algorithm for keeping Volume list in SD. It
801 is now owned by the device.
803 kes Implement new code for freeing in use volumes that should
804 resolve if not all, some of the problems of multiple drive
805 tape conflicts described in bug 801.
807 kes Fix gui/bacula-web/images files in svn.
808 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
810 ebl Fix a bug in batch mode (in string escape)
811 kes Correct migration prune SQL typo that crept in in a
814 kes Move bnet_despool() into class in bsock.c
815 kes Modify job report to include director name and Build OS.
816 kes Move drop root privilege and check_catalog() before fork.
817 kes Add update database scripts (version 9 to 10) to updatedb directory.
819 ebl Check size and age of each file after its backup to see if
820 it has changed during backup, if 'checkfilechanges' is set.
821 The FD will do an extra check (stat(2)) after
822 each file backup. mtime, ctime and size are compared with
823 'before backup' information. If time or size mismatch, an
824 error message will be generated. You must upgrade FD to use it.
826 kes Make database name and user configurable
827 --with-db-name=xxx --with-db-user=xxx
828 kes Add back database type to message.c for debugging.
830 kes Implement dir_sql() which issues an SQL query.
831 kes Modify bat medialist to use dir_sql() and do some minor C++
832 formatting as well as eliminating a number of pointers, simplifing
835 kes Fix some of the mtx-changer grep commands for tape label readers.
836 kes Convert a number of bsendmsg into the appropriate send/warning/error
838 kes Suppress the using database message in the .sql command.
839 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
841 kes Add context menu for floating a window.
842 kes Some minor cleanup and name changes in qt-console
843 kes Add doing mt setblk 0 in Win32 mtx-changer.
844 kes Apply Martin's bug fix to move definition of ENODATA for
846 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
849 kes More pruning cleanup.
850 kes Turn on wait_for_drive by default in mtx-changer.
851 kes Turn on Batch insert code by default as it now passes regression.
852 kes Add ./configure --enable-bat to enable building of Bat.
853 No install yet though.
855 kes Implement a new .sql command for bat.
856 kes Implement code to turn off pruning in obtaining the next volume.
857 Pruning is turned off for the status dir command, but turned on
858 for SD requests and for the list nextvolume command.
860 kes Correct Qmsg() that was not updated correctly when committing a
861 previous change (probably the recent TLS patch).
863 kes Write new subroutine is_volume_purged() that explicitly checks
864 if the Volume is purged, and if so marks it as such. This should
865 resolve problems reported about needing to mount twice to recycle
867 kes Rewrite pruning algorithm to do more work in the SQL engine, and
868 to pass a list of JobIds to be deleted to SQL. Also, minimize the
869 amount of duplicated code.
870 kes Do volume pruning only for the Media Type desired (reduces pruning time
871 if multiple Media Types are in the same pool).
872 kes Implement more detailed info in the Job report for the Bacula version
874 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
876 ebl Add bbatch tool to bench database and insert mode.
877 Fix sql quote stuff in batch mode
878 Fix sql stuff for mysql
880 kes Correct problems with am/pm scheduling. Fixes bug #808.
881 kes Implement new prunning code that prunes up to 1000 jobs at
882 the same time. The same technique can be applied to a number
883 of other prune/purge subroutines.
884 kes Add an insanity check when starting a new tape job to ensure
885 that the tape position has not been changed. If so fail the
887 kes Fix Win32 build for dlls to add the folllowing:
888 src/lib/bsock.c -- new file with new entry points
889 src/lib/dlist.c -- new entry points
890 src/cats/sql_create.c -- new entry point
891 src/cats/sql_cmds.c -- new DATA item exported
893 ebl batch mode cleanup bscan-test is ok now.
894 kes Implement SD code to check length of disk volume before appending.
896 kes Correct return status on db_batch... routines.
897 kes Add call to db_write_batch_file_records() to migration code.
898 ebl Fix AfterJob timing
899 kes Move the checking of the database in initializion of the Director
900 to after we drop privileges. This avoids the need for both root
901 and bacula access to the DB.
902 kes Correct a misplaced variable definition in src/filed/backup.c
903 kes Correct how the new batch insert db_create_attributes_record()
904 uses the arguments. Caused a seg fault in bscan.
905 kes Implement lock() and unlock() methods in DEVICE class.
906 Implement block() and set_block(xx) methods in DEVICE class.
907 kes Modify bnet_connect() so that it uses time() to check for the
908 wait time expiring (on some OSes, some system calls may not
910 kes Modify Verify to obtain the previous JobId when it is actually
911 running rather than at schedule time (as it was in 1.38.x).
912 kes Fix src/job.c to handle MaxWaitTime correctly. This should
914 kes When checking pid in pid file, continue running if the pid is
915 the same as ours. This occurs on IRIX after a system crash.
918 kes Extend new GUI API.
919 kes Make the ua structure a class, and implement send_msg(),
920 error_msg(), warning_msg(), and info_msg().
922 kes Apply fix from for building wx-console on the Mac from
924 kes Implement new select mechanism for GUI programs.
925 kes Reorganize initialization of stackedWidgets in bat.
927 kes Add updated nagios plugin supplied by Christian Masopust.
929 kes More bat implementation.
930 kes File migrate bug with Pool Occupancy using mediaid instead
931 of jobids. Fixes bug #795.
932 kes Fix orphaned buffers in filed backup and verify due to
933 crypto buffers not freed during errors. Fixes bug #789.
934 kes Extend new GUI api code to tree commands.
935 kes Ensure that tree and dot commands check console ACLs.
936 kes Permit marking directory with trailing slash.
937 kes Allow 20 console connections (instead of only 10).
939 kes Add smartctl call to bacula-sd.conf as an example of getting
942 kes Modify jobq.c to let simultaneous restore jobs run. This may
943 cause them to fail if they cannot get a drive.
944 kes Add Client Connect Wait to Storage daemon to permit users to
945 modify the time the SD waits for a FD connection.
947 kes Correct virtual changer check which was backwards. This caused
948 volumes to be unloaded into slots already occupied.
950 kes Apply Command ACL filter to JobId list in restore command.
951 kes Correct typeo in var.c patch.
953 kes Don't let Bacula prune File or Job records for the current Job.
954 kes Fix variable substitution pad + inc bug reported (with patch)
957 kes Correct SQLite log table index as reported by Luca Berra.
959 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
961 kes Begin implementing new comm signals for API.
962 kes Fix a few places in lib/message.c where the open fd may
964 kes Continue implementing lib/bsock.c (real class). Make jcr,
965 who, host, and port private. There are new methods to access
966 them for non-class use. This required touching a number of files.
968 kes Add LANG=C to autoconf/randpass so it works with languages other
969 than English. Fixes bug #788.
971 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
973 You will not be able to generate Include/Exclude list any more.
974 It will be fixed soon.
975 If you want to use this, you can apply
976 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
978 kes Restore of sockets created false error messages because Bacula
979 no longer restores sockets, but the code was still trying to
980 set the attributes on a non-existent file. Reported by a user.
981 ebl finish RecyclePool feature
982 Media will takes Pool.RecyclePool
983 when moving from Scratch to a Pool or when user will do
984 update volume=xxx frompool
985 To use it, add RecyclePool = aPool to your Pool resource
988 RecyclePool = Scratch
992 kes Expand new BSOCK class adding signal() and new BNET signals.
993 kes Begin enhancing the dot commands adding a new API function
994 that returns more information and will make it easier
995 to interface to the Director from a program.
997 kes Make DEVICE fd private. Its new name is m_fd, and can be
998 obtained with dev->fd() outside the class. This is the
999 first of many DEVICE members to be made private.
1000 kes Implement Michael Renner's idea on having a virtual disk
1001 changer. I made some minor modifications (e.g. I did not
1002 implement the Virtual Changer directive, but simply set
1003 the Changer Command to an empty string.
1005 kes Implement a BSOCK send() method that writes the whole record
1006 in a single write() request rather than in two.
1007 ebl add update volume=xxx recyclepool=yyyy
1008 volume takes recyclepool from pool when using update volume=xxx from pool
1010 kes Fix encryption deblocking bug, which caused some restored files
1011 to be truncated. This fixes bug #763.
1012 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1013 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1015 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1016 ebl Use btime_t instead of uint64_t in media patch.
1018 kes Optimize the use of the database a bit in the Status dir command.
1019 Only open it when needed, ensure that if any previous database
1020 was opened, it is closed.
1022 kes Correct VolCatBytes bug from media patch.
1023 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1024 in the case of orphaned records.
1025 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1026 and File records in 300K chunks to be more efficient. This
1027 idea came from Juan Luis Frances (if I remember right).
1028 kes Apply Eric's scratch patch that moves a purged Volume to
1029 the RecyclePool. Question: how is RecyclePool set? what
1030 happens to the ScratchPool?
1031 kes Apply Eric's media patch that collects read/write media
1032 times as well as byte counts. This patch requires a
1033 simultaneous upgrade of the DIR and SD. Note, there
1034 should be some way to turn off timing. I'm not sure
1035 times are in Bacula units.
1036 kes Apply Eric's batch-insert patch.
1038 kes Update projects list.
1040 kes Implement Include/Exclude file lists in FD as dlists using
1041 the new dlistString class. This permits efficiently having
1042 large include/exclude lists and completes project Item 25.
1043 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1044 console is authorized to cancel the job. This fixes bug
1046 kes Modify SD so that the VolCatJobs medium record is updated
1047 at the beginning of a Job rather than the end. This
1048 fixes bug #775 where exceeding MaxVolJobs caused jobs
1050 kes Added a mutex around getting and setting Volume information
1051 so that multiple simultaneous jobs will single thread.
1053 Switch to using Subversion
1054 kes Remove src/pygtk-console/ from configure
1056 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1057 plus the entrypoints.
1058 kes Apply patch supplied that corrects debug print
1059 in canceling jobs for max run time. Supplied as
1060 part of bug #621, which was previously fixed.
1062 kes Test on job_canceled() and sd_msg_thread_done inside
1063 loop starting the message thread to avoid a race condition.
1065 kes Remove rl_catch_signal from console.c as it conflicted
1066 with the header definition. Fixes bug #765.
1067 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1069 kes Clarify some stored/acquire messages to indicate if the
1070 problem is with read or append.
1072 kes Fix memory leak with storage ids in cats/sql_get.c
1073 kes Terminate watchdog earlier to avoid reference to released
1074 memory -- reported by Jason Austin.
1075 kes Move closing the database from jobq.c to the director daemon
1076 termination routine. This fixes memory leaks for shadow jobs
1077 (i.e. migration jobs).
1078 kes Free up the unique jobid chain items in migrate.c. This fixes
1079 a memory leak problem.
1080 kes Convert some ugly looking for statements to use foreach_alist
1081 in findlib/find.c. This will facilitate converting the structures
1082 to use dlist (for large include/exclude lists).
1083 kes Fix a bug in the btree.c and btree.h routines, then rename them
1084 rblist and add them to be built in src/lib. Include some new
1085 methods written by Rudolf Cejka that make the code more readable
1086 (hides some of the ugly casting).
1087 kes Add set_next() and set_prev() methods which make the code much more
1088 readable. Also add a new dlistString class that facilitates storing
1089 strings in dlists. To be used in the large include/exclude lists.
1090 kes Make some trivial modifications to lib/tree.h that use rblist
1091 rather than dlist for storing the tree links. This was suggested
1092 by Rudolf Cejka. The result of this is that the restore tree now
1093 uses red-black binary trees rather than simple linked lists. This
1094 should give rather dramatic speed improvements for directories
1095 contining large numbers of directories/files (more than 10000).
1097 kes Fix maxruntime bug #621.
1099 ebl Implement the include JobID in spool file name project.
1100 kes Reorder projects file in order determined by Jan 2007 vote.
1101 kes Implement item #12 on project list -- quick release of FD by
1103 kes Fix open of SQLite3 db where user does not have write permission
1104 so that DIR does not crash. Fixes bug #761.
1106 kes Add back missing @ in Win32 Makefile.
1107 kes Change 'Device not configured to autolabel' from INFO
1109 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1110 which should restart an indefinite # of times.
1111 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1112 other DIR specifications.
1114 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1115 Fix path quoting in SQLite scripts.
1116 Fix problems with SHGetFolderPath.
1118 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1120 kes Fix Job restart on error bug that promotes an Inc to a Full
1121 backup. This should fix bug #755.
1122 kes Add qt-console and first cut of code.
1126 kes Fix Bacula->Documentation link on Win32 to point to index.html
1127 instead of bacula.html. Fixed bug #750.
1128 kes Return JobId in db_get_job_record() when JobId==0. This should
1130 kes Do not release source pointers when restarting a failed job.
1132 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1133 This *should* fix bug #747.
1134 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1137 kes Modify USTORE constructor to set an empty store_source string,
1138 and don't copy the store_source string in a cancel. Hopefully
1139 this will fix Arno's seg fault, bug #744.
1140 kes Add back code to disable conio in configure. Fixes bug #743.
1141 kes Correct the Options scanner in the FD to correctly handle
1142 SHA1 option, which was eating the next option. Reported by
1144 kes Add code to indicate when the SD is spooling, spool wait, and
1145 despooling as requested by Alan Brown.
1147 Version 2.0.0 released: 4 January 2007