1 Technical notes on version 2.3
5 kes Implement FD version to allow easier protocol changes.
6 kes Add Plugin Options string -- not yet passed to FD.
7 kes Implement PluginOptions ACL.
9 kes Attempt to correct problems with restores with autochangers and
10 use counts going negative
11 kes Rework SD status command and implement API for bat. Implements
12 header, runing waitreservation, devices, volumes, spooling,
13 and terminated status keywords.
14 .status storage=xxx <keyword>
15 kes Clarify TLS error message by adding double quotes around name.
16 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
17 kes Pass jcr to tls routines so debug messages can be handled better.
18 kes Rework jobq resource allocation code, and possibly fix a bug
19 that caused reference counts to get out of sync.
21 kes Rename fd/dir plugin to use Bacula standard underscore.
22 kes Plugin work -- bring dir up to fd level.
23 kes Start implementation of VTL code
24 kes Fix Win32 build after adding new cats subroutine.
26 kes First cut at Duplicate Job implementation.
28 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
29 kes Start PluginOptions string, and refactor a bit of ua_run.c
30 ebl Apply Allan patch that permit to reset recyclepool.
32 kes Test patch -- possible fix or improvement for bug #1053
33 kes Refactor FD and SD status commands to permit new API code in
34 SD, and to fix Win32 build.
35 kes Win32 build is now working.
37 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
38 some ideas in patch from Scott Bailey.
39 kes Begin implementation of duplicate Job control.
40 kes Fix some of Win32 build after recent additions.
41 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
42 which causes the FD to detect whether or not the OS has the
43 honor no dump bit (*BSD systems), and if so, to skip backing up
44 any file with this bit set. The feature is enabled by setting
45 'honor no dump flag = yes' in the Options section of a FileSet.
47 kes Correct po warning message with datarootdir
48 kes Implement more code in dird.c to put configuration parsing in
49 a class rather than use globals.
50 kes Restructure SD status command for implementation of bat API
53 kes Suppress incorrect 'Will not descend from x into y' messages.
54 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
55 daemon globals used by parser.
56 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
58 kes Fix free of plugin_list when none exists.
60 ebl Apply accurate project patch.
62 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
63 on non-mempool object)
64 kes First cut of converting FD .status to work with bat API.
66 .status client=XXX header
67 .status client=XXX running
68 .status client=XXX terminated
69 kes Implement first cut of Copy Job.
70 kes Implement Catalog in Pool resource. It overrides catalog specified
71 in the Client resource.
73 kes Apply patch (with some difficulties) from Joao Henrique Freitas
74 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
76 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
77 ftruncate() actually works. In the case of some (cheap) NAS devices,
78 it does not, and so recycling NAS Volumes does not work. The code
79 simply unlink()s the file, then recreates it. This fixes bug #1011.
81 kes First incomplete cut of big malloc blocks for htable.
82 kes Tweak plugin code.
84 kes Plugin debug code + tweak a couple bat dialog layouts
86 kes Fix creating first JobMedia record during Migration to include
87 proper index. This caused slow restores of migrated jobs.
88 kes Temp fix to plugin name file_index.
89 kes Bacula backed up and restored a MySQL database.
91 kes Implement plugin restore.
92 kes Implement parsing of db_driver to give db_type index.
94 kes First cut of plugin restore code.
95 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
96 and do not strip paths on symbolic links.
97 kes Set catalog backup database and user name from values specified on
99 ebl Fix #1031 about wrong pool source information in job report.
102 kes Remove a redundant jcr argument to find_files, match_files, and
104 kes Implement '.status dir header|scheduled|running|terminated' that
105 prints the requested status section. With the exception of the
106 header, the other reports have fields separated by tabs (\t).
108 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
109 a resource embedded run command to find a since time if no explicit
110 since time was supplied on the command line.
111 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
112 that updates the state file at job termination time in addition to
113 when the daemon terminates.
115 kes First version where a plugin did a backup.
116 bpipe-fd.so created a backup file, wrote a test
117 string to it, and Bacua could restore this fabricated file.
119 kes Implement DB Driver = string for the DBI driver.
120 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
121 kes First cut of code for loading Win32 plugin dlls. Implement
122 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
123 and implement a dlfcn.h file based on opengroup's definitions of
126 kes First cut plugin directives.
128 kes Apply patch from bug #1049 to prevent stripping the path on a
130 kes Attempt to fix bug #1047 where stripping a path corrupts the
131 heap. Waiting for feedback.
132 kes Correct the Mount message not to suggest labeling a new tape
133 when doing a restore. Submitted by email by John Stoffel.
134 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
135 FD by using casting. Reported in bug #1042.
137 kes A bit of crypto cleanup. More later.
139 Release Version 2.2.8
141 kes Apply patch from Martin to correct bug #1040, bscan sets existing
143 kes Fixed important spelling error in doc -- bug #1045.
145 ebl Fix bextract to be able to extract non-portable Win32 data to
147 kes Move initialization of read/write res lock earlier in the code.
148 This fixes the crash with a null conf file. This fixes bug
150 kes Redefine CURES in lib/parse_conf to be URES and move it all
151 into lib/parse_conf.c -- this responds to bug #1042, but does
152 not fix it. The fix is not to compile with FORTIFY_SOURCE.
153 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
154 the trunk SVN. I don't think this was reported as a bug.
156 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
158 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
160 kes Add DataDespooling and DataCommitting status (committing is
161 the last despooling).
162 kes Finish implementation of new reservations code noted below.
164 kes Fix bsnprintf for float point numbers. I broke recently when
165 parameterizing some variables. This fixes bug #1036.
166 kes Undo recent reservations changes ... will apply them later
167 when they work better.
169 ebl Fixes #1034 which cause mysql to hang the connection after 8h
170 ebl Change default statistics target of filename.name and path.path
171 fields for PostgreSQL. This speeds lookup by indexes. Thanks
173 kes A few more tweaks to new reservation code. Make sure to clear
174 vol released flag when retaking volume. When reading label and
175 label is bad mark volume unused. When recycling, mark volume
176 unused so it can be renamed.
178 kes Fix reserve_volume() so it doesn't release a volume in use
179 (i.e. a volume entry not marked released). This should be
180 the last part needed to fix bug #1018.
182 kes Move Heartbeat documentation from Job to Director resource.
183 This fixes bug #1033.
185 kes Fix existing switch drive SD code to call autochanger to release
186 any old volume. This must be done to keep the autochanger from
187 releasing subsequently newly reserved volumes in doing a close().
188 This should fix bug #1018.
189 kes Fail if attempting to get console input in batch mode. This
190 should help fail RunScript console commands that are incomplete.
191 kes First cut implementing switch_drive() in SD (not actually called).
193 kes Implement first cut running console commands in a RunScript.
195 ebl Fixes bug #1028 where 'Selection Type' option was not usable
197 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
200 Release Version 2.2.7
202 kes Add new free_tls() entry point so that Win32 builds.
203 kes Fix compile warning in src/lib/util.c
204 kes Fix entry point for edit_job_codes() so that Win32 builds.
205 kes Fix seg fault Frank Sweetser reports in regression testing
206 on his systems. The problem was that the original author of
207 bsnprintf.c did not take into account the side effects of
208 using ++x in the argument to a #define.
209 kes Make SD protocol backward compatible with version 2.2.x.
211 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
212 because Bacula no longer restores sockets.
213 ebl Always use ignorecase fileset option on win32 FD.
215 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
216 that implements double quoting include names in conf files,
217 and also allows piping input by having the first character
218 be a vertical bar (|).
219 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
220 that implement %f in RunScripts to pass the FileSet name.
221 kes Skip leading | when lex input comes from a pipe as suggested
222 by Michael Stapelberg <michael@stapelberg.de>.
224 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
225 Nerijus Baliunas <nerijus@users.sourceforge.net>
227 kes Implement Plugin Directory and plugin events.
229 kes Implement a security enhancement: TLS authentication but no
230 encryption. Enabled by setting 'TLS Authentication = yes'.
231 Note when this is on, TLS encryption is turned OFF!
233 kes This patch corrects a problem where the maximum concurrent storage
234 jobs counter gets out of sync during restore jobs causing jobs to
235 'wait on max Storage jobs'. This patch fixes bug #1009.
237 kes This patch fixes bcopy so that it produces correct Volumes.
239 kes This patch eliminates spurious output to the console during a VerifyVolume
240 job that contains encrypted data. It fixes bug #1024.
242 kes This patch prevents the 'status dir' command from trying to use a scratch
243 volume and possibly moving it from one pool to another. This patch fixes
246 kes Add new include to postgresql.c suggested by Marc Cousins so
247 that it compiles correctly with pgre version 8.3.
249 kes Fix --archivedir addition to configure. Replace it with
250 --with-archivedir in configure.in This fixes the regression
252 kes This patch fixes bug #1012 where the job is canceled because
253 of Max Run Time exceeded when the job has not yet started.
255 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
256 one 'part' to write. Instead of each part being stored on disk,
257 written to DVD, then deleted from disk, all parts are written to disk,
258 and only the last is written and deleted from disk.
259 kes This patch fixes the status command to include the formating string for
260 JS_AttrInsterting. It fixes bug #1021.
261 kes This patch should fix the Mac OS X build problem on the latest
262 Darwin, where sys/types.h was not included correctly (apparently
263 due to a change in the Mac headers). The solution was to explicitly
264 ensure that it is defined for the ./configure.
265 This patch also has a rebuild of configure that includes the Debian
266 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
267 kes This patch should ensure that queued messages to the console are
268 displayed as soon as possible. It should fix bug 1007, but has been
269 reported not to work.
271 kes This patch fixes the infinite loop when trying to increase the
272 maximum number of volumes in a Pool during the add command.
273 This patch fixes bug #1008.
275 Release Version 2.2.6
277 db Remove extra data on estimate command in joblist for bat.
279 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
280 really change anything, but is the beginning of doing it *right*.
281 To do it completely right the LastWritten date must be passed to
282 the SD, but it is not yet done.
283 kes Minor tweaks to some bat restore SQL.
284 kes This patch fixes bug #1003 where putting the message output from
285 a Verify job into the catalog results in a recursive loop. The problem
286 seems to show up only with postgresql (to be verified).
287 kes Correct %x to %p in postgresql debug statement.
289 kes Fix bug #942 where lots of emails where generated when the heartbeat
290 interval was low and Bacula wanted a different tape from the one in
293 ebl Add new SD despooling attributes and Dir inserting attributes
294 job status codes in the catalog (Status table).
296 ebl Use qmake-qt4 instead of qmake when available (debian system).
298 kes Add a security warning to src/cats/make_catalog_backup.in indicating
299 that passing the password via the command line (arg 3) is insecure.
300 This responds to bug #990 (it doesn't fix it).
302 kes Set default debug_level to zero. This corrects bugs #991 and #993.
303 kes Fix a crash in bat when it cannot connect to the Director for example
304 if the Director is not running.
305 kes Remove redundant INDEX (JobId) from File table in the trunk.
307 kes Make explicit exception to GPL in LICENSE to permit linking
308 the Win32 FD with Microsoft VSS code.
309 kes Apply the Solaris package patch from
310 Masopust, Christian <christian.masopust@siemens.com>
311 kes Apply the patch to optionally add a timestamp in the debug output
312 submitted by Mariusz Czulada <manieq@wp.eu>.
314 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
315 backend (sql_strerror). Fixes bug #989
317 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
318 It applied with no problems.
319 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
321 kes Redirect stderror to stdin on mt status command in mtx-changer.in
322 since the status is returned on stderr on Solaris.
323 kes Activate Close button on tray-monitor window. This fixes
325 kes Check for NULL item in parse_conf.c before calling it. In the
326 case of Device, there is no item and this caused a seg fault when
327 Device appears in the conf file.
328 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
329 avoids pulling in config.h multiple times in some new code.
331 kes Fix spurious warning message printed when creating a volume with
332 a LabelFormat. This fixes bug #976.
334 Release Version 2.2.5
336 kes Add JobId in place of Job name in all the Jmsg() output.
337 kes Correct the APP_DESC for the Win32 storage service (remove an e).
339 kes Make maxvol-test and new more strict maxvol2-test work.
340 kes Print JobId in all Jmsg() job output.
342 kes Add new SD despooling attributes and Dir inserting attributes
343 job status codes. This fixes bug 961.
344 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
346 kes Fix doc issue. This fixes bug #963.
347 kes Fix listing performance problems in bat. Pointed out by
349 kes Remove old debug code.
350 kes Fix bat code that tests for Win32. This should fix bug #968
351 kes Query 5 list wrong Vol after migration. This fixes bug #960
353 ebl Fix #969 where user can't change Replace option in restore menu.
355 kes Save jcr in thread specific data (tsd) for each thread.
356 kes Make Dmsg() print JobId as -%u.
357 kes Make Jmsg, Emsg, and others automatically pickup the jobid
358 for the thread if it exists.
359 kes Remove old reservation debug jid code.
360 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
361 ebl Add an option that permit to specify spool size in job
362 definition. (Applying patches/testing/spoolsize_per_job.patch).
363 You must upgrade SD and DIR at the same time.
364 dvl Add new configuration item --archivedir
365 dvl Adjust regression tests to use tmp not /tmp. This will allow
366 multiple concurrent runs of the regression tests.
368 kes Fix race condition that drops final block written to volume.
369 This happens in rare cases with multiple simultaneous jobs
370 when the Volume fills. This fixes bug #964. May be related
371 to bug #935 and possibly #903.
372 kes Eliminate more strerror() and replace with bstrerror().
373 kes Remove BSD getopt and replace with unrestricted IBM version.
374 kes Fix Win32 build for changed calling sequences.
375 kes More tweaks to the mount volume routines to get everything
376 right. Changed variable name from find to have_vol, which is
377 much easier to understand.
378 kes Enhance btimer debug code.
380 kes Fix FD->SD authorization failure, which was due to spurious
381 wakeups from a pthread_cond_timedwait(). Simply check the
382 predicate before continuing. This fixes bug #953.
383 kes Add const char where needed (more to do). Remove temp debug code.
385 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
386 kes Don't overwrite error message in check_tables_version.
388 kes Unlock batch insert tables with same calls used elsewhere.
389 kes Allow starting 59 jobs a second.
390 kes Make SD session key more random.
391 kes Add retry for SQLite opening db if it fails. Probably helps
393 kes Suppress extra error messages during batch insert failure.
395 kes Add jcr to timer packets so if killed message can be sent to job.
396 kes Add JobId to all Dmsg() output.
397 kes Put some FD auth code on dbglvl rather than fixed.
398 kes Return insert attributes error message in db msg buffer to avoid
399 false error messages. Helps fix bug #966.
400 kes Separate batch init error messages. Probably helps fix bug #966.
401 kes Make SD code that contructs attribute insert check string lengths
403 kes If Dir gets an error during inserting attributes, cancel SD.
404 This reduces unnecessary error messages.
406 kes Correct search boolean for getting Volume info
407 ebl Cleanup batch insert code. Probably fixes bug #965.
408 kes Back out one small change to the reservation system (reserving a volume).
409 kes Rework how a Volume is mounted. It is now much more intelligent and
410 will always attempt to use any mounted volume if possible and reduces
411 calls to the Director asking about volumes.
413 kes Turn off some code when batch insert not enabled.
414 kes Edit FD name in connect error messages.
415 kes Rework the reservation system to take into account that the Director
416 might give us a Volume that is different from the current one being
417 used, and to ensure that we don't exceed Maximum Volume Jobs.
418 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
419 fatal error with multiple jobs running'
420 kes Add more debug code in reservation system.
421 kes Implement maxvol-test to check bug #947.
423 kes Add code to handle tray monitor separated from Win32 FD.
424 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
426 kes Add missed return in fixing verify bug -- trunk only.
427 ebl Fix a command parser issue causing a director segfault.
428 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
430 kes Increase the max block size to 4MB fixes bug #957.
431 kes ERABT if user sets min block size > max block size. Fixes bug #956.
432 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
433 is not properly mounted (recognized) during a poll.
434 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
435 Job that has differences reports Verify OK.
436 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
438 ebl Add an option to operate on all pools with update vol parameters.
439 This complete the project 20. Patch from Nigel Stepp.
440 ebl Add history support to bconsole when using readline.
441 Using Ctrl-D to exit doesn't update .bconsole_history
442 kes Modify new volume algorithm to use max MediaId for generating next
443 volume number rather than the count of Volumes. This should essentially
444 eliminate the failure rate if some volumes were deleted. Bug #921.
445 kes Begin implemention of Optimize Job Scheduling.
446 kes Implement restore callback that Dirk and I agreed on for bat
447 restore. This fixes bug #928. Restore of backup of zero files fails.
448 kes Fix SQL Catalog logging which broke with new db_escape_string
451 Release Version 2.2.4
453 kes Fix bacula_cats.def for new db_escape_string().
454 kes Increase size of name string when FD making connection to SD.
455 May fix bug #953. FD->SD connection failure.
457 kes Add code to help Dan debug 2drive-incremental-2disk test.
458 kes Add code to try to fix bug #908.
459 kes Add waits to multiple exit detection code to try to force pid
460 file to always be deleted.
461 kes Restore good dev.tar.gz to rescue set appropriate binary property.
463 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
464 trying to switch drives by checking for blocking before unblocking.
466 kes Cancel storage daemon in all cases where FD reports error. This
467 should fix virtually all cases of bug #920.
468 kes Fix db_escape_string() for MySQL which did not compile.
470 kes Fix error message that was clobbered when Dir tells SD it does not
471 have write permission on Volume. This should fix a minor point
472 in bug #942, but not the main problem.
473 kes Add code to cancel job in SD if FD connection fails. This should
475 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
476 dvl Pass jcr and db into db_escape_string() to enable better escaping
478 kes Fix migration code to get correct Volume name with multiple volumes
479 by skipping |. Fixes bug #936.
480 kes Implement patch supplied by Landon to fix bug #944 where using
481 TLS with bconsole uses 99+% of the CPU.
482 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
484 kes Move patches into patches directory.
486 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
489 ebl Using 'm' in bconsole will show messages like before,
490 and not memory usage.
491 kes Fix bug #935, and probably also bug #903 where files were not
492 restored. MediaId was not properly set in JobMedia record after
495 kes Suppress chown and chmod error messages if the FD is not running
498 kes Apply Martin Simmons' patch that should turn off the new API usage
499 when batch insert is turned off allowing building on older
501 kes Add ./configure search in qwt-qt4 for qwt package
503 kes Bacula is now free of 3rd party GPL copyrighted code!
505 kes Add guid_to_name.c/h which replace idcache.
506 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
508 ebl Detect if new PosgreSQL batch insert API is present.
509 kes Correct incorrect mempool call causing Director crash. Occurs on
510 systems without va_copy().
511 sb Update spec files for 2.2.1 release
513 kes Fix memory pool call in ua_output.c. bug #934.
514 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
515 Add test program to fnmatch.c
517 kes Integrate patch to README.vc8 from
518 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
519 edit it to get it into Unix patch format.
520 kes Implement mkpath.c to replace old FSF makepath.c
522 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
524 Release Version 2.2.1
526 kes Update POTFILES.in
527 kes Cleanup a few underquoted AC_DEFUNs in configure
528 kes Apply patch from Martin Simmons that adds a test for va_copy to
531 kes Fix bug #921 by increasing the number of tries to create a new volume
533 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
534 can be called multiple times. Implement a version for machines
535 without va_copy() that gets a big buffer.
537 kes Integrate more portable zone offset code into bsmtp.c
538 Submitted by Attila Fülöp.
540 kes Fix bad SD->FD return status reported by
541 (James Harper) <james.harper@bendigoit.com.au>
542 ebl Fix a bug in read_close_session which return random status
543 thanks to James Harper
545 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
546 and directory names during restore of single file/directories.
547 kes Add sanity checks to .sql command when string is empty. Hopefully
548 that will resolve Dirks Director crash.
550 kes Apply patch submitted by Martin Simmons that corrects a seg fault
551 in the bsmtp chat subroutine when debug is >= 10.
553 kes Fix Director crash when running bat SQL queries.
554 kes Add David's notes on Item 8: Copy pools.
556 kes Rework projects file to be current and ready for a vote.
557 kes Enhance lex scanner error message.
559 kes Tweak LICENSE file to mention BSD code.
560 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
561 if specified on the ./configure.
562 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
563 This class is intended to allow us to open a second bsock to the
564 Director while in the restore subdialog.
566 kes Fix configure to create bat Makefile before creating dependencies.
567 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
568 kes Add a tooltip to the tray monitor.
569 dvl Set the Director's PID file before dropping privs. This fixes
572 kes Update AUTHORs file
573 kes Increase the default max concurrent jobs to 20 in FD and SD to
574 correspond with the default .conf files.
575 kes Rewrite the Win32 service routines. This eliminates the 3 copies
576 some different, of the same file created by RN when porting the
578 kes Rearrange some of the Win32 directories and the placement of the files
580 kes Set DEVELOPER flag in version.h
582 ========================================================================
583 Release Version 2.2.0
585 kes Apply a second doc patch from Marc.
586 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
587 improves the tips section that discusses how to setup multiple
590 kes Update bat README file.
591 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
592 corrects a typo in the Recycle status check in db_find_next_volume().
593 This will probably fix a number of annoying problems with multiple
595 kes Modify most of dird/msgchan.c to use bsock class calls rather than
596 bnet calls -- no functionality change.
598 kes Modify the Verify output to specify if files are missing on
599 the Volume(s) or disk. Fixes confusion in bug #916.
600 kes When more than one Volume is read in a migration job, the last
601 Volume bytes reported are from the last read volume rather than
602 the last written volume. Fixed. This fixes bug #910.
603 kes Fix display of Recycle flag after update volume=foo recycle=yes.
604 It previously printed New Recyle flag is: no. This fixes bug
607 kes Correct seg fault when switching tape drives during restore.
608 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
609 be used until after 2.2.0 release.
611 kes Remove fnmatch() in SD that permitted wild card specifications.
614 kes Fix %g in filename returned by SQL for browse tree reported by
616 kes Fix configure so that it puts config.out in the cwd rather than
618 kes Attempt to fix the locking problem reported by Eric in bug #906.
619 kes Make berrno class to leave errno unchanged after constructor call.
620 kes Make bnet_server use the heap rather than the stack to allocate
621 its socket fd pointers to avoid a crash at termination. Problem
622 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
624 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
625 and putting it in depkgs-qt along with Qt4.3.
627 kes Rework code in acquire.c that switches drives for reading when
628 the Media Type does not match. This should fix bug #906
630 ebl Fix a director segfault during job setup #907
631 kes Correct seg fault in postgresql when first operation returns no
632 rows. Fixes Dirks File browser problem seg fault with bat.
634 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
635 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
638 kes Implement PopUp YES/NO dialog for bat.
640 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
642 kes Correct RunScript to terminate job in FD on failure.
643 kes Change abort_on_error and AbortJobOnError to fail_on_error
644 and FailJobOnError in RunScripts.
645 kes Minor tweaks of code formating in RunScripts, principally to
646 avoid depassing 80 columns.
648 kes Eliminate one #ifdef Win32 in bsmtp
649 kes Implement grow tool to grow a file for testing very large databases.
650 kes Add big-vol-test to test Bacula seeking with > 5GB.
653 kes Modify find_next_volume() to return all values in Media record.
654 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
658 kes Update Release notes
660 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
661 Warning, in previous beta version, all media get from scratch keep their
664 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
665 This should fix bug #842. Made a note to look at removing the temp
666 files at the end of the install.
667 kes Add ability to mount and unmount a file device providing it is
668 marked as being removable and has the appropriate mount and unmount
669 commands defined in the Device resource. This fixes bug #830.
670 kes When applying a storage override, release all previous storage
671 definitions rather than just prepending the new storage.
672 This should prevent a good deal of confusion.
674 kes Implement ./configure search for qwt libraries.
676 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
677 Win32 FD. This should fix bug #893.
678 kes Remove an unnecessary beep in Win32 init code.
679 kes Update copyright dates in Win32 executable about boxes.
680 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
681 code with a BSD getopt.c and getopt.h.
682 kes Remove sched.h from the Win32 compat directory -- not used.
683 kes Remove the Exit menu item from the Win32 tray monitor. If you really
684 need to shut it down, do it through the services panel or the command
686 kes Remove some inappropriate Bacula FSFE copyrights.
687 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
688 kes Fix regress config non-portable test as pointed out by
689 Florian Heigl <florian.heigl@gmail.com>
690 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
691 as pointed out by Florian Heigl <florian.heigl@gmail.com>
693 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
694 Reported by Frank Sweetser.
698 kes Fix client-only build.
699 kes Integrate client-only fixes for bsys (initgroups) and conio from
700 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
701 kes Make arguments to get_scratch_volume() in same order as other
703 kes Rework the prune_volumes() subroutine so that after purging and
704 no volume found in desired pool, it will check for a scratch
705 volume. This prevents recycling the whole scratch pool.
706 kes Add code to status storage to print boffset_t (largefile support).
708 kes Move qwt (Graphics libarary for Qt4) to depkgs.
709 kes You now need a --with-qwt=<dir> to be able to build bat.
710 kes Update src/win32/cats/bacula_cats.def to include the new
711 db_get_query_dbids() call on Win32.
713 kes Correct a problem when selecting a scratch volume and moving
714 it to another pool that lost some columns.
715 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
716 kes Enhance Autochanger error messages to include Volume and device name.
717 kes Rework prune_volumes() code to take account of InChanger flag,
718 and to handle recycling volumes going to the Scratch pool and
719 current pool because the RecyclePool directive.
720 kes Implement a better and more efficient db_get_query_dbids() to
721 handle creating and passing back a list of DBIds.
725 kes Start work on new more efficient DBId subroutine. First use
726 will be for recycling volume to Scratch inchanger.
727 kes Increase number of JobIds in pruning from 1000 to 10000.
728 This to be replaced by above routine.
729 kes Begin implementation of building Qt4 on Win32.
730 kes Correct typo in fix I added for bad TLS shutdown.
731 kes Pull 2.0.3 patches into patches directory.
732 kes Update Release notes. Include qt-console in line count.
733 kes Update Projects file.
735 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
736 bug in migration code where a job that spanned two volumes
739 kes Implement new BST_DESPOOLING blocked state. Change from locking
740 during despooling in SD to blocking. This means that other threads
741 can work with the device structure, in particular the reservations
742 system while despooling.
744 kes Fix return in reservation message queue that missed clearing
745 the jcr lock (implemented 26Jun07 below).
746 kes Rename a number of dev methods to make locking function names
748 kes Document locking in lock.c. Move lock structures to new file
751 kes Move reservations message lock to lock jcr only this
753 kes Move main SD locking code into lock.c (new file).
754 kes Update Win32 build to include lock.c
758 kes Dirk committed the qwt library code for drawing graphs in bat.
759 kes Tweak install of qwt so that it is integrated with ./configure.
761 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
762 out by Eric (my typo).
763 ebl Fix configure.in to get batch mode enable
764 kes Return correct string from authenticate.cpp in bat when connecting
766 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
767 spurious line drops when using TLS.
768 kes Do not file reparse points when restoring a file that already
771 kes Implement Windows reparse points -- similar to directories, but
772 we do not descend into it. This is a first cut. They seem to
773 be backed up, but restore is not yet tested.
774 kes Remove restore_blocking in tls code when shutting a socket to leave
775 it in blocking mode. Hopefully this will fix the encryption bug
776 reported by Frank Sweetser.
777 kes When opening a file for backup, tell the OS that we are going to
778 read it sequentially -- optimization.
779 kes Change variable names in authenticate_director() to not conflict
780 with member names in bat. Caused great confusion with compiler,
783 kes Queue openssl error messages in case of comm problem.
784 kes Do shutdown() call if socket terminated.
785 kes Remove some duplicated code in tls.c
786 kes Move more of the bsock member variables into private and access
788 kes Add Frank Sweetser's tls-test to the regression suite.
790 kes Add Swedish sv.po file
792 kes Don't print clock skew message in FD if less than 3 seconds diff.
793 kes Add a bit of VSS info to status client.
794 kes Implement a first cut of Vista VSS, using Win2003 code.
798 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
799 loaded tape but uses first drive).
800 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
801 This was indeed a Win32 issue.
803 kes Simplify search of autochanger for in-use Volume.
804 kes Fix exit condition of check for in-use volume. kes Remove
805 inappropriate my_postgresql_free_result() in db_close()
807 kes Fix bad return in FD when encryption signature not found.
808 Probably caused a crash.
809 kes Inhibit missing encryption signature error messages for
810 file types where no signature computed.
811 kes Correct inverted check on autochanger in reservation system.
812 kes Tweak debug code in autochanger reservation.
814 kes Add some additional locking in the cats directory in subroutines
815 that modify packet variables called from batch insert.
816 kes Rework how dcrs are allocated. new_dcr() can now be called
817 with an existing pointer, and it will simply clean it up.
818 This allows the reservation system to test various different
819 devices, and will permit easy device changes.
820 kes A bunch of changes all over to handle new new_dcr() calling
822 kes Work more on the Volume management in the SD. Remember Volumes
823 for tape drives and for autochangers (even virtual disk changers).
824 kes When looking at the Volume list to reserve a drive, handle
825 autochanger names correctly by interating through the changer
826 devices. Also call the Director to see if a Volume is suitable
828 kes Fix some bugs in bscan. Make sure all media records are written.
829 Make sure that valid JobMedia records are written for disk files.
830 Previously they were completely wrong.
831 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
832 that the URLs don't change and so that the developers will all
833 work off the same copy. Rebuild from scrach.
834 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
838 kes Fix seg fault in FD from incorrect digest size.
839 kes Fix argument to non-OpenSSL crypto.c subroutine.
843 kes Remove a few malloc()s from the encryption code.
844 kes Use the class calls to bsock in filed/backup.c and restore.c in
845 place of the old bnet_xxx code.
846 kes Implement code that does an on the fly calculation of the
847 signing digest during restore of encrypted files. It makes
848 a best guess at the algorithm, and if it is not correct, will
849 then revert to the old code which reads the file after it is
851 kes Implement at least one missing crypto stream in stream_to_ascii()
852 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
853 #877 where a reload with bad syntax causes Dir to exit.
855 Cut: 2.1.14 beta (not released)
857 kes Do not free a volume on a tape drive until another volume is
858 mounted and read, or the autochanger unloads the volume.
859 This should help the SD re-use volumes that are already mounted,
860 and should fix bug #886.
861 kes Apply patch from user brettedgar that allows gnome2-console include
862 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
863 kes Apply patch from Lucien Weller that fixes day of week calculation
864 because of DST flag problem. Fixes bug #887.
866 kes Move find_next_appendable_volume() to after acquiring a valid device
867 in reserve.c. This fixes bug #864 -- confirmed by reporter.
869 kes Unable to reproduce bug 872. However added additional testing for
871 kes Bug #874 resolved by documenting SQLite limitations.
872 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
873 kes Bug #881 resolved by removing typo in mtx-changer script.
874 kes Made Frank Sweetser's wiki the official Bacula wiki with his
875 approval. Added a link to the wiki on the web page, and implemented
876 a backup from http://paramount.ind.wpi.edu
878 kes Fix update allfrompool to pass pool name.
880 kes Convert to pure GPL v2 license.
881 kes Fix sscanf problems reported by Peter Buschman that caused
882 a bus error on Solaris.
883 kes Rework (simplify) the select prompt in bat.
884 kes Move get_jobid_from_tid() into lib and create a
886 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
887 should definitely fix the problem of lost error messages in the
889 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
890 kes Eliminate tcpd.h from the project. Enclose the #include from the
891 library with extern C ...
892 kes Add print of signal name when a signal is trapped.
896 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
898 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
899 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
900 makes SQLit3 run 30 times faster, though a bit less safe.
901 kes Implement --with-batch-insert in configure and detection of thread
902 safe libraries. It is on by default, but turned off if no thread
903 safe library (e.g. SQLite 2) is available.
905 kes Fix Bacula PostgreSQL buffer overruns.
906 kes Do better checking for NULL results returned from PostgreSQL;
907 implement retry for failed queries; clear results buffer after
908 failed query. Hopefully this will correct the PostgreSQL failures.
910 kes Implement algorithm to handle only one appendable volume with
911 Prefer Mounted Volumes = no.
912 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
913 returned from a query.
914 kes Make volume lock recursive.
915 kes Implement an additional volume reservation algorithm that
916 starts by considering all reserved volumes then uses the
917 old brute force algorithm of searching the resources to
918 find a suitable device.
919 kes Add new reservations debug code and refine the old code.
920 kes Update the win32/dll/bacula.defs file.
922 kes Tweak reservations algorithm to permit a few more cases, i.e.
923 volume reserved, but on different drive, ...
924 kes Enhance SD status to include Pool and Media Type for drive in a
925 more readable format (a bit longer).
926 kes Fix PostgreSQL double free.
928 kes Minor refactoring of restore decryption code.
929 kes Add code to smartall.c to detect double free of a buffer.
931 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
932 so that bsmtp will create a correct email address (mailbox only).
933 kes Modify 'memory' command so that the buffers are listed as 'In use'
934 to avoid confusion with Orphaned buffers.
935 kes I reworked the OpenSSL include/lib flags to be handled in
936 the standard Bacula way, which should fix bug #863 concerning
937 non-standard OpenSSL libraries.
939 kes Implement Help Browser window for bat.
940 kes Fix reload bug that reset StorageId to zero.
942 kes Fix TLS #ifdefing when TLS turned off.
943 kes Ensure that when labelling a tape with Slot=0 that InChanger
945 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
947 kes Add StartTime to final uar_sel_jobid_temp query so that we can
948 add DISTINCT (required by PostgreSQL).
949 kes Implement BSOCK authenticate_director() method. Eventually will
950 authenicate all daemons.
951 kes Move several more functions into the BSOCK class.
953 kes Add code to tell the OS that we no longer need a cached
954 file that we were reading. In findlib/bfile.c. Also,
955 only cache files that we are reading. Thanks to
956 Tobias Oetiker <tobi@oetiker.ch> for the idea.
957 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
958 kes Implement script to automatically generate cats and dll .def
960 kes Update README.mingw32 to include new .def file generation.
961 kes Correct typo in UTF-8 error message as reported by:
962 jhernandez <julianhernandez@gmail.com>
963 kes Add additional sm_check() code on debug level 1.
964 kes Set default debug level to 1.
965 kes Trap SIGABRT in attempt to get traceback.
967 kes Reduce bat connect timeout from 30 to 15 seconds.
968 kes More restructuring and implementing BSOCK class in place of
970 kes Remove a few unnecessary malloc() tests in crypto code.
971 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
972 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
973 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
975 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
977 kes Fix Verify InitCatalog. The attributes were not pointing to the
978 correct saved location.
979 kes Implement message callback so that GUI is sure to get all
980 daemon messages. Currently displayed in a dialog in bat.
981 kes Ignore SIGUSR2 (Bacula timer) in bat.
982 kes Apply regress patch from bug #859 to allow regress to work
983 with Solaris compiler.
985 kes Begin adding TLS support to bat.
986 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
987 clean up lex.c and make it more readable.
989 kes Move more bnet functions into the BSOCK class.
990 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
991 kes Complete change of berrno strerror() method to bstrerror()
995 kes Cleanup incorrect email addresses in bsmtp.
996 kes Make bat display initial messages rather than discard them.
998 kes First cut of adding .mod to the run command.
999 kes Implement auto display of messages in bat.
1000 kes Enhanced preferences to allow all Bacula output to be
1003 kes Try to make bsmtp date routines more generic.
1004 kes Fixed bug #856 autochanger documentation.
1005 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1006 kes Add new cats entry point so Win32 builds.
1008 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1010 kes Do better checking for the MySQL 64 bit libraries looking for both
1011 .a and .so libraries.
1012 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1013 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1014 kes Require the thread safe version of MySQL during configure. Thanks
1015 to Andre Noll for pointing this out.
1016 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1017 continuing in migration code.
1018 kes Apply implementation of tray-monitor font derived from gnome-console
1019 submitted by Andreas Piesk <a.piesk@gmx.net>
1021 kes Eliminate important memory loss in SQLite
1022 kes Fixed the batch insert MySQL thread specific data that was not
1023 being freed. See cats/mysql.c:db_thread_cleanup().
1024 kes Fix restore before command.
1025 kes Convert old hdr.name to name() in a few places.
1026 kes Implement update jobid command.
1027 kes Return all time_t dates in db_get_job_record()
1028 kes Stop watchdog in SD earlier.
1029 kes Put Pool just after Storage in please mount message.
1030 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1033 kes Update the po files.
1034 kes Fix Verify InitCatalog by making it cache attributes.
1036 kes Change name bacula-bat to bat for man 1 page to correspond to
1038 kes Check for client and store NULL pointers in status command. This
1040 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1041 kes Fix sign extended editing of %p.
1042 kes Clean out a little old #ifdefing in cats/mysql.c
1044 kes If time diff between DIR and FD is more than 600 seconds convert
1045 INFO message to WARNING.
1046 kes Implement heap size display in status for all daemons.
1047 kes Attempt to fix MySQL db open memory loss (not successfull).
1048 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1049 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1050 Query. This looks like a MySQL but but by doing extra releases,
1051 the memory goes away. This should fix bug #847.
1053 kes When backup fails, cancel SD before waiting for sd termination.
1054 kes If SD is waiting for FD to connect during cancel, wake up the
1056 kes Fix fsf code so that errno is correctly reported.
1057 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1059 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1060 so that Bacula doesn't later stumble into a seg fault.
1061 kes Use the term Restore Client in the restore Job report.
1062 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1063 the original job's FileSetId.
1064 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1065 spooling in migration jobs. Not yet tested.
1066 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1067 reading conf file from a pipe. However, do it with open_bpipe()
1068 rather than popen. Not yet tested.
1070 kes Fix an ugly bug where the VolCatBytes were getting updated
1072 kes Implement bconsole memory command that prints current memory
1073 usage, plus smartalloc dump.
1074 kes Clarify some error messages in backup, admin, and migrate.
1075 kes Shrink label dialog to smaller size.
1076 kes Invert Cancel OK buttons on restore to be OK Cancel.
1077 kes More strerror() to bstrerror() conversions.
1079 kes Start implementing bstrerror() in place of strerror().
1080 kes Stripping path -- seems to work.
1082 kes Prevent door and port files from being restored (mostly
1084 kes Free an unreleased buffer in compat code.
1085 kes Change console Job name from *Console* to -Console- to eliminate
1086 Win32 filename problems. Put Win32 path separator when creating
1087 Console file. This fixes bug #846.
1088 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1090 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1092 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1093 to force Win32 error message.
1095 kes First cut strip path. The data should be passed to the FD,
1096 but nothing is done with it yet.
1097 kes Enhance the digest and signature routines in the crypto
1098 library to accept a JCR and to use it to print error messages
1099 so that they will go in the Job report rather than the daemon's
1101 kes Simplify some of the verify signature code.
1102 kes Simplify a few of the alternative returns in the signature
1105 ebl Use only POSIX regex instead of GNU regex in breg.c for
1106 File relocation. It fix broken freebsd compilation.
1107 kes Convert all other Dir files to use new ua class message
1109 kes Tentative fix for missing digest signature in bug 807.
1110 kes Correct handle problem in new win32_ftruncate routine.
1111 kes Convert ua_purge.c and ua_update.c to use new ua class
1112 message routines for bat.
1114 kes Correct incorrect installation of LICENSE in Win32 installer.
1115 kes Display LICENSE at the beginning of the Win32 install.
1116 kes Attempt to correct the need for the png files to be installed
1118 kes Reapply my bat.conf install script in qt-console. I think I
1119 editted bat.pro instead of bat.pro.in and it was lost.
1120 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1121 the /var/lock/subsys for subsysdir. Also corrects typos in the
1124 kes First cut update job.
1125 kes Correct configure to include qmake of src/qt-console directory.
1127 kes Make restore job yes/mod/no print in one command so GUI works.
1128 kes First cut implementing backup and restore client.
1129 kes Correct editing in Verify output that caused a seg fault.
1131 kes Insure that bat.conf is not overwritten during installation.
1132 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1133 while I was implementing migration in March 2006 !
1135 ebl Cleanup file relocation, using char *RegexWhere instead of
1136 char *where + bool where_use_regexp
1137 kes Update some manpages and add bat manpage.
1138 kes Make a first cut at converting bacula.spec.in for bwx-console
1140 kes Apply patch from John Goerzen to add hostname as fourth argument
1141 to make_catalog_backup script.
1142 kes Fix typos I introduced into bsmtp.c
1143 kes Make pm_strxxx() routines handle input of NULL pointer. This
1144 is to protect from NULL pointers returned from SQL databases.
1145 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1146 kes Add more debug to FIFO code -- fix fifo regression test.
1148 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1149 kes Add thread timer to bnet_connect() to break from OS if wait time
1152 kes Update Win32 build to include new files, new symbols, and
1154 kes Implement socket level heartbeat (tcp_keepidle)
1155 ebl Commit File relocation patch
1156 kes Make bat have 'make install' target.
1157 kes Warn during install if old gnome-console binary found.
1158 kes Warn during install if old wx-console binary found.
1159 kes Add -8 option to bsmtp command line to add content type utf-8.
1160 Fixes bug #809. (Character coding problem in bsmtp).
1161 kes If < is found in target (from, to, cc) then do not enclose the
1162 target in < > in bsmtp. Fixes bug #772 (malformed address).
1163 kes When printing certain items in dbcheck, stop after 300000.
1164 Fixes bug #822. (dbcheck loops).
1165 kes Incorrect status in Dir after waiting for mount with poll set.
1168 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1170 kes Print waiting to reserve a device every 5 mins.
1172 kes Don't call close_part in label.c if tape and relabel.
1173 kes Don't free volume if busy in close() -- should help with
1175 ebl Fix #824 RunScript bug (After script could be execute twice)
1176 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1177 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1178 Add a regression script to test RunScript
1180 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1183 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1184 deprecated. No additional bugs will be fixed, and they will be dropped
1185 in a future release (probably 2.4.0).
1186 kes Change name of wx-console to bwx-console to make it more Bacula
1188 kes Change the name of gnome-console to bgnome-console to make it
1191 kes Some time in March, a Feature Request with patch from Jorj Bauer
1192 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1194 The ability for the director to validate a Client (FD) CN against
1195 an arbitrary set of patterns rather than the hostname, with
1196 A new 'TLS Allowed CN' set of directives which are implemented
1197 in the Client resource. Then pattern matching is used in place
1198 of hostname matching against the Certificate's CN. As an example, we
1199 have certificates which (a) use a local CA, and (b) have a CN of the
1201 kes Add new/changed entry points to Win32 build
1202 kes Create unaccepted-projects for projects that are not accepted.
1203 kes Simplify locking in the reservations system.
1204 kes Add more debug code in reservations.
1205 kes Make sure error condition on reserving a volume is handled correctly.
1206 kes Correct handling of volume_in_use.
1207 kes Correct handling of initializing a device.
1208 kes Move handling of broadcasting releasing a device into release_device().
1209 kes Correct attaching dcr to dev so that it is only done if device
1210 is properly initiated.
1212 kes Locking debug level tweaks in SD.
1213 kes Tweak new Volume code.
1215 kes Add exec external-command [wait-seconds] to bconsole. This
1216 executes the external-command. Note! normally external-command
1217 should be enclosed in double quotes.
1218 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1219 it should normally be off in a production system.
1221 kes Implement die command for SD so that we can force it to dump.
1222 kes Implement SD lock debug code.
1223 kes Implement new algorithm for keeping Volume list in SD. It
1224 is now owned by the device.
1226 kes Implement new code for freeing in use volumes that should
1227 resolve if not all, some of the problems of multiple drive
1228 tape conflicts described in bug 801.
1230 kes Fix gui/bacula-web/images files in svn.
1231 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1233 ebl Fix a bug in batch mode (in string escape)
1234 kes Correct migration prune SQL typo that crept in in a
1235 recent 2.1.x change.
1237 kes Move bnet_despool() into class in bsock.c
1238 kes Modify job report to include director name and Build OS.
1239 kes Move drop root privilege and check_catalog() before fork.
1240 kes Add update database scripts (version 9 to 10) to updatedb directory.
1242 ebl Check size and age of each file after its backup to see if
1243 it has changed during backup, if 'checkfilechanges' is set.
1244 The FD will do an extra check (stat(2)) after
1245 each file backup. mtime, ctime and size are compared with
1246 'before backup' information. If time or size mismatch, an
1247 error message will be generated. You must upgrade FD to use it.
1249 kes Make database name and user configurable
1250 --with-db-name=xxx --with-db-user=xxx
1251 kes Add back database type to message.c for debugging.
1253 kes Implement dir_sql() which issues an SQL query.
1254 kes Modify bat medialist to use dir_sql() and do some minor C++
1255 formatting as well as eliminating a number of pointers, simplifing
1258 kes Fix some of the mtx-changer grep commands for tape label readers.
1259 kes Convert a number of bsendmsg into the appropriate send/warning/error
1260 message class calls.
1261 kes Suppress the using database message in the .sql command.
1262 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1264 kes Add context menu for floating a window.
1265 kes Some minor cleanup and name changes in qt-console
1266 kes Add doing mt setblk 0 in Win32 mtx-changer.
1267 kes Apply Martin's bug fix to move definition of ENODATA for
1269 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1270 sqlite2 and sqlite3.
1272 kes More pruning cleanup.
1273 kes Turn on wait_for_drive by default in mtx-changer.
1274 kes Turn on Batch insert code by default as it now passes regression.
1275 kes Add ./configure --enable-bat to enable building of Bat.
1276 No install yet though.
1278 kes Implement a new .sql command for bat.
1279 kes Implement code to turn off pruning in obtaining the next volume.
1280 Pruning is turned off for the status dir command, but turned on
1281 for SD requests and for the list nextvolume command.
1283 kes Correct Qmsg() that was not updated correctly when committing a
1284 previous change (probably the recent TLS patch).
1286 kes Write new subroutine is_volume_purged() that explicitly checks
1287 if the Volume is purged, and if so marks it as such. This should
1288 resolve problems reported about needing to mount twice to recycle
1290 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1291 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1292 amount of duplicated code.
1293 kes Do volume pruning only for the Media Type desired (reduces pruning time
1294 if multiple Media Types are in the same pool).
1295 kes Implement more detailed info in the Job report for the Bacula version
1297 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1299 ebl Add bbatch tool to bench database and insert mode.
1300 Fix sql quote stuff in batch mode
1301 Fix sql stuff for mysql
1303 kes Correct problems with am/pm scheduling. Fixes bug #808.
1304 kes Implement new prunning code that prunes up to 1000 jobs at
1305 the same time. The same technique can be applied to a number
1306 of other prune/purge subroutines.
1307 kes Add an insanity check when starting a new tape job to ensure
1308 that the tape position has not been changed. If so fail the
1310 kes Fix Win32 build for dlls to add the folllowing:
1311 src/lib/bsock.c -- new file with new entry points
1312 src/lib/dlist.c -- new entry points
1313 src/cats/sql_create.c -- new entry point
1314 src/cats/sql_cmds.c -- new DATA item exported
1316 ebl batch mode cleanup bscan-test is ok now.
1317 kes Implement SD code to check length of disk volume before appending.
1319 kes Correct return status on db_batch... routines.
1320 kes Add call to db_write_batch_file_records() to migration code.
1321 ebl Fix AfterJob timing
1322 kes Move the checking of the database in initializion of the Director
1323 to after we drop privileges. This avoids the need for both root
1324 and bacula access to the DB.
1325 kes Correct a misplaced variable definition in src/filed/backup.c
1326 kes Correct how the new batch insert db_create_attributes_record()
1327 uses the arguments. Caused a seg fault in bscan.
1328 kes Implement lock() and unlock() methods in DEVICE class.
1329 Implement block() and set_block(xx) methods in DEVICE class.
1330 kes Modify bnet_connect() so that it uses time() to check for the
1331 wait time expiring (on some OSes, some system calls may not
1332 return immediately).
1333 kes Modify Verify to obtain the previous JobId when it is actually
1334 running rather than at schedule time (as it was in 1.38.x).
1335 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1337 kes When checking pid in pid file, continue running if the pid is
1338 the same as ours. This occurs on IRIX after a system crash.
1341 kes Extend new GUI API.
1342 kes Make the ua structure a class, and implement send_msg(),
1343 error_msg(), warning_msg(), and info_msg().
1345 kes Apply fix from for building wx-console on the Mac from
1347 kes Implement new select mechanism for GUI programs.
1348 kes Reorganize initialization of stackedWidgets in bat.
1350 kes Add updated nagios plugin supplied by Christian Masopust.
1352 kes More bat implementation.
1353 kes File migrate bug with Pool Occupancy using mediaid instead
1354 of jobids. Fixes bug #795.
1355 kes Fix orphaned buffers in filed backup and verify due to
1356 crypto buffers not freed during errors. Fixes bug #789.
1357 kes Extend new GUI api code to tree commands.
1358 kes Ensure that tree and dot commands check console ACLs.
1359 kes Permit marking directory with trailing slash.
1360 kes Allow 20 console connections (instead of only 10).
1362 kes Add smartctl call to bacula-sd.conf as an example of getting
1365 kes Modify jobq.c to let simultaneous restore jobs run. This may
1366 cause them to fail if they cannot get a drive.
1367 kes Add Client Connect Wait to Storage daemon to permit users to
1368 modify the time the SD waits for a FD connection.
1370 kes Correct virtual changer check which was backwards. This caused
1371 volumes to be unloaded into slots already occupied.
1373 kes Apply Command ACL filter to JobId list in restore command.
1374 kes Correct typeo in var.c patch.
1376 kes Don't let Bacula prune File or Job records for the current Job.
1377 kes Fix variable substitution pad + inc bug reported (with patch)
1380 kes Correct SQLite log table index as reported by Luca Berra.
1382 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1384 kes Begin implementing new comm signals for API.
1385 kes Fix a few places in lib/message.c where the open fd may
1387 kes Continue implementing lib/bsock.c (real class). Make jcr,
1388 who, host, and port private. There are new methods to access
1389 them for non-class use. This required touching a number of files.
1391 kes Add LANG=C to autoconf/randpass so it works with languages other
1392 than English. Fixes bug #788.
1394 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1396 You will not be able to generate Include/Exclude list any more.
1397 It will be fixed soon.
1398 If you want to use this, you can apply
1399 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1401 kes Restore of sockets created false error messages because Bacula
1402 no longer restores sockets, but the code was still trying to
1403 set the attributes on a non-existent file. Reported by a user.
1404 ebl finish RecyclePool feature
1405 Media will takes Pool.RecyclePool
1406 when moving from Scratch to a Pool or when user will do
1407 update volume=xxx frompool
1408 To use it, add RecyclePool = aPool to your Pool resource
1411 RecyclePool = Scratch
1415 kes Expand new BSOCK class adding signal() and new BNET signals.
1416 kes Begin enhancing the dot commands adding a new API function
1417 that returns more information and will make it easier
1418 to interface to the Director from a program.
1420 kes Make DEVICE fd private. Its new name is m_fd, and can be
1421 obtained with dev->fd() outside the class. This is the
1422 first of many DEVICE members to be made private.
1423 kes Implement Michael Renner's idea on having a virtual disk
1424 changer. I made some minor modifications (e.g. I did not
1425 implement the Virtual Changer directive, but simply set
1426 the Changer Command to an empty string.
1428 kes Implement a BSOCK send() method that writes the whole record
1429 in a single write() request rather than in two.
1430 ebl add update volume=xxx recyclepool=yyyy
1431 volume takes recyclepool from pool when using update volume=xxx from pool
1433 kes Fix encryption deblocking bug, which caused some restored files
1434 to be truncated. This fixes bug #763.
1435 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1436 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1438 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1439 ebl Use btime_t instead of uint64_t in media patch.
1441 kes Optimize the use of the database a bit in the Status dir command.
1442 Only open it when needed, ensure that if any previous database
1443 was opened, it is closed.
1445 kes Correct VolCatBytes bug from media patch.
1446 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1447 in the case of orphaned records.
1448 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1449 and File records in 300K chunks to be more efficient. This
1450 idea came from Juan Luis Frances (if I remember right).
1451 kes Apply Eric's scratch patch that moves a purged Volume to
1452 the RecyclePool. Question: how is RecyclePool set? what
1453 happens to the ScratchPool?
1454 kes Apply Eric's media patch that collects read/write media
1455 times as well as byte counts. This patch requires a
1456 simultaneous upgrade of the DIR and SD. Note, there
1457 should be some way to turn off timing. I'm not sure
1458 times are in Bacula units.
1459 kes Apply Eric's batch-insert patch.
1461 kes Update projects list.
1463 kes Implement Include/Exclude file lists in FD as dlists using
1464 the new dlistString class. This permits efficiently having
1465 large include/exclude lists and completes project Item 25.
1466 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1467 console is authorized to cancel the job. This fixes bug
1469 kes Modify SD so that the VolCatJobs medium record is updated
1470 at the beginning of a Job rather than the end. This
1471 fixes bug #775 where exceeding MaxVolJobs caused jobs
1473 kes Added a mutex around getting and setting Volume information
1474 so that multiple simultaneous jobs will single thread.
1476 Switch to using Subversion
1477 kes Remove src/pygtk-console/ from configure
1479 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1480 plus the entrypoints.
1481 kes Apply patch supplied that corrects debug print
1482 in canceling jobs for max run time. Supplied as
1483 part of bug #621, which was previously fixed.
1485 kes Test on job_canceled() and sd_msg_thread_done inside
1486 loop starting the message thread to avoid a race condition.
1488 kes Remove rl_catch_signal from console.c as it conflicted
1489 with the header definition. Fixes bug #765.
1490 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1492 kes Clarify some stored/acquire messages to indicate if the
1493 problem is with read or append.
1495 kes Fix memory leak with storage ids in cats/sql_get.c
1496 kes Terminate watchdog earlier to avoid reference to released
1497 memory -- reported by Jason Austin.
1498 kes Move closing the database from jobq.c to the director daemon
1499 termination routine. This fixes memory leaks for shadow jobs
1500 (i.e. migration jobs).
1501 kes Free up the unique jobid chain items in migrate.c. This fixes
1502 a memory leak problem.
1503 kes Convert some ugly looking for statements to use foreach_alist
1504 in findlib/find.c. This will facilitate converting the structures
1505 to use dlist (for large include/exclude lists).
1506 kes Fix a bug in the btree.c and btree.h routines, then rename them
1507 rblist and add them to be built in src/lib. Include some new
1508 methods written by Rudolf Cejka that make the code more readable
1509 (hides some of the ugly casting).
1510 kes Add set_next() and set_prev() methods which make the code much more
1511 readable. Also add a new dlistString class that facilitates storing
1512 strings in dlists. To be used in the large include/exclude lists.
1513 kes Make some trivial modifications to lib/tree.h that use rblist
1514 rather than dlist for storing the tree links. This was suggested
1515 by Rudolf Cejka. The result of this is that the restore tree now
1516 uses red-black binary trees rather than simple linked lists. This
1517 should give rather dramatic speed improvements for directories
1518 contining large numbers of directories/files (more than 10000).
1520 kes Fix maxruntime bug #621.
1522 ebl Implement the include JobID in spool file name project.
1523 kes Reorder projects file in order determined by Jan 2007 vote.
1524 kes Implement item #12 on project list -- quick release of FD by
1526 kes Fix open of SQLite3 db where user does not have write permission
1527 so that DIR does not crash. Fixes bug #761.
1529 kes Add back missing @ in Win32 Makefile.
1530 kes Change 'Device not configured to autolabel' from INFO
1532 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1533 which should restart an indefinite # of times.
1534 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1535 other DIR specifications.
1537 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1538 Fix path quoting in SQLite scripts.
1539 Fix problems with SHGetFolderPath.
1541 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1543 kes Fix Job restart on error bug that promotes an Inc to a Full
1544 backup. This should fix bug #755.
1545 kes Add qt-console and first cut of code.
1549 kes Fix Bacula->Documentation link on Win32 to point to index.html
1550 instead of bacula.html. Fixed bug #750.
1551 kes Return JobId in db_get_job_record() when JobId==0. This should
1553 kes Do not release source pointers when restarting a failed job.
1555 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1556 This *should* fix bug #747.
1557 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1560 kes Modify USTORE constructor to set an empty store_source string,
1561 and don't copy the store_source string in a cancel. Hopefully
1562 this will fix Arno's seg fault, bug #744.
1563 kes Add back code to disable conio in configure. Fixes bug #743.
1564 kes Correct the Options scanner in the FD to correctly handle
1565 SHA1 option, which was eating the next option. Reported by
1567 kes Add code to indicate when the SD is spooling, spool wait, and
1568 despooling as requested by Alan Brown.
1570 Version 2.0.0 released: 4 January 2007