1 Technical notes on version 2.4
5 kes Modify SQL so that jobs that failed will not be migrated.
6 kes Correct bug where long retention periods caused immediate
11 ebl Apply 2.4.3-update-slots.patch to fix #1175. About update slots
12 that don't reset InChanger flag when slot is empty.
14 ebl Apply 2.4.2-cancel-non-running-jobs.patch to be able to cancel
15 a non created job faster.
17 kes This should correct bug #1159 where Migration does not properly
18 respect the Migration Low Bytes directive.
20 ebl Fix typo in configure.in that breaks --with-db-password option
22 kes This code should fix the race condition that leads to a Director
23 crash at job end time when the job list is updated. This was reported
26 kes Remove all double quotes from SQLite creating script and
27 replace by single quotes as suggested by John Huttley.
29 kes Fix SQL case problem that may cause the failure of DiskToCatalog
31 kes Copy missing storage name into edit buffer. As far as I can tell
32 this never caused a bug.
34 ebl Remove catalog dependency for bcopy
35 ebl Modify catalog scripts to have an easier packaging integration,
36 using default variables.
37 Make difference between SQLite3 and SQLite in db_get_type()
39 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
40 job when reading from one autochanger and writing to another.
42 kes Add more information to SD acquire.c INFO messages.
43 kes Fix NULL Volume name error when reading and the drive must
46 kes Fix a Verify InitCatalog problem where in certain cases
47 a garbage filename may be entered in the verification database. This
49 kes Add space after version before date in bat about dialog.
51 kes Fix seg fault in Dir during estimate command with no level value
52 given. This fixes bug #1140.
54 kes Add message to migration job when the target job is already migrated.
55 This closes bug #1129.
59 kes When a migration job actually runs, re-check the Job record
60 and skip if the job is already migrated. This should
61 significantly reduce the problems with bug #1129.
63 kes Break the do_swapping into do_unload, do_swapping, and
64 do_load. It is much more logical that way.
65 kes Implement a set_dcr_from_vol subroutine in acquire.c for
66 reading volumes. This allows the dcr to be refreshed after being
67 zapped when the wrong volume is mounted.
68 This should fix bug #1126 -- During multiple tape restore, bacula
69 does not ask for physical tape change, but rereads same tape
71 kes Apply patch submitted for bug #1107 with a small modification.
72 This fixes a bug where bcopy copied too many records.
73 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
75 kes Make the default bat restore Pool be Any. This fixes bug #1118.
78 kes Fix bug #1125 which reports a SD crash at the end of a tape
79 during restore. It was a debug statement that should not be
82 ebl fix #1034 by setting big timeout on mysql connections
84 kes Do partial integration of the Win32 bat build created by Eric.
85 kes Fix bat not to block.
87 kes Ensure that SD tried to mount a volume not in an autochanger
88 at least once before asking for operator intervention.
89 kes Fix a pthreads bug in the Win32 pthreads emulation code.
93 kes Clear in-use bit on vol when unused while swapping.
95 kes Remove sleep at end of ./bacula
96 kes Clear hash packet for hardlinked files correctly. This corrects
97 a long standing bug where hardlinked files selected individually
98 would occasionally not be restored.
100 kes Apply Eric's patch to ensure that autoprune does not return
101 a Volume not in the autochanger unless requested to do so.
102 kes Correct bat restore display of multiple drives. This fixes
104 kes Do find_a_volume() each time an unload is done. This
105 fixes the failure of maxvol2-test.
107 Release Beta version 2.4.1-b2
109 kes Use Qmsg() in job.c watchdog callback.
111 kes Release main control rwlock if ABORTing.
112 kes Make watchdog connect timeout queue messages rather than sending
113 directly to avoid lock conflicts with the real thread.
114 kes Remove const char that causes problems with Python, which has
115 older 'incorrect' headers.
116 kes Add const char in dbd.c to avoid compiler warnings.
118 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
119 mt. This fixes bug #1116.
120 kes Fix failure of 2drive-concurrent-test. Always read label;
121 clear_unload() only after drive is defined in acquire_for_read().
123 Release Beta version 2.4.1-b1
125 kes Back out bad src/lib/base64.c change.
127 kes Generally clean up the manual tape loading code. The main
128 conceptial change is that when a volume is marked to be unloaded,
129 its volume name is retained, and it is only marked as unloaded
130 when either the autoloader says it is unloaded or another tape
131 is read on that drive.
133 kes Fix a recycling problem with two autochangers reported in bug
134 #1106. This may also (unlikely) fix a second recycling bug as
136 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
138 kes Fix format problem in bscan output reported in bug #1105.
140 kes Copy more data when restarting a job so that run
141 overrides are kept. This should fix bug #1094.
142 kes Backport updates to jobq.c where possible.
144 kes Fix bug where SD did not ask operator if the device could not
145 be opened. Reported by Eric.
147 kes Add dbuser to DIR conf file (replaces user).
148 kes Add --with-db-password to ./configure
149 kes Fix regress to handle db_password.
150 kes Fix a couple of pedantic compiler warnings.
151 ebl Fix bug when starting a restore on a storage that doesn't
152 have the requested MediaType.
154 kes More work on word alignments -- eliminate all ints from
155 the configuration routines.
157 kes Fix bug reported by Scott Barninger where the bacula script
158 refers to scripts in the wrong directory. Needed to meet the
159 requirements of recent FHS location changes.
160 kes Fix word alignment problem on non-Intel 64 bit machines
161 such as Solaris. This should fix bug #1097 -- bus error in SD.
163 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
165 Release Version 2.4.0
167 kes Update version to reflect the magnitude of the SD changes.
169 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
170 This fixes bug #1095.
172 kes Add create_postgresql_database.sql to Win32 installer. Should
173 fix problem reported by Juilio Monteiro.
174 kes Get correct slot when auto unloading a device. This fixes bug
177 kes Fix multiple media restore.
178 kes Make DEVICE Slot private and access it via a method.
179 Allows better control over when it is set and cleared.
180 kes Fix possible seg fault if SQL error.
182 kes Add debug code to SD.
183 kes Fix renaming a Volume, which used the wrong Volume name.
185 kes If operator has rewind tape, print warning, release tape and
186 try once more. If tape is positioned somewhere, something went
187 wrong, so mark the tape in error and try once more. Previously
188 this error was fatal, now it produces an error message.
189 kes Ensure correct volume name displayed during restore
190 kes Ensure that Volume is mounted for restore.
192 kes Fix a few more Coverity reported problems.
194 Beta Release Version 2.2.10-b4
196 kes Enhance a couple of SD debug messages.
197 kes Tweak unload flag setting and ensure it is set during swap.
199 ebl Fix #1091 about bad output in estimate command.
201 kes Modify autochanger locking to attempt to avoid race
203 kes Make sure device not busy before doing label command.
204 kes Display open() errors except when polling. Previously too
205 many were suppressed. This should fix bug #1070.
206 kes Fix Win32 reparse points. Bacula will not recurse into any
207 reparse point directory, including mount points, unless the
208 directory is explicitly mentioned at the top level (same as
209 with Unix). A file that is linked to another file will be
210 backed up -- much as Unix does for hardlinked files.
211 This fixes bug #1041.
213 kes Remove double quotes from ChangeLog and ReleaseNotes
214 kes Remove StorageId test when pruning and recycling (Eric's changes).
215 kes Remove old form of locking when getting volumes -- causes deadlock.
217 kes Fix buffer overruns detected by Coverity.
219 Beta Release Version 2.2.10-b3
221 kes Tweak joblog display.
223 kes Implement --without-qwt
224 kes Fix layout of restore tree dialog
225 kes Add configure bat QWT libraries, so that bat can be built
226 with or without the QWT libaries.
228 kes Apply batfix bat cleanup patch from Riccardo.
229 kes Make sure we unload the right slot when swapping.
231 kes Improve SD reserve debug code.
232 kes Testing an improvement to free up volumes no longer in use.
234 Beta Release Version 2.2.10-b2
237 kes Rework SD acquire for read to handle autochanger Volume
239 kes Implement regression that explicitly tests swapping a Volume
240 from one drive to another.
241 kes Enhance disk-changer to detect most error conditions.
242 kes Fix SD code so that it properly swaps a Volume between drives.
243 This fixes bug #1083.
245 kes Prevent a Volume that is being swapped from being freed from
246 the volume list. This will most likely fix, at least partially,
248 kes Fix strippath so that it does not get a buffer overrun and crash FD.
249 This fixes bug #1078.
250 kes Make inability to change owner/group when creating a dir only a
251 warning rather than an error.
253 ebl Fix SQL query in migration code
255 kes Force unload of volume when wrong volume mounted in SD.
257 kes Fix bat seg fault at termination.
258 kes Add Bacula generated version to bat about box.
260 Beta Release Version 2.2.10-b1
262 kes Permit multiple simultaneous restores -- experiment.
264 kes Backport development stream SD reservation system changes.
267 kes Move final volume swapping code to DCR method and
268 call it from acquire_for_read().
269 kes When wrong volume is mounted during read, unload_autochanger.
271 kes Stop searching for Volumes in SD askdir if DIR returns the
272 same volume name twice in a row.
274 kes Tweak the swap Volume from one drive to another code so that
275 it now seems to work.
276 kes Resolve several problems with recycling that broke the new
277 code (these problems are in 2.2.9 as well).
278 kes Remove the volume lock when calling the sysop code.
279 kes Don't mark a reserved volume with no writers as unused otherwise
282 kes Rework class structures for VOLRES, DCR, and DEVICE to make
283 the method names a bit more logical, and for more logically
284 handling the responsibilities.
286 kes Remove redundant code in terminating the scheduler that just
287 causes a seg fault in many cases.
288 kes Cleanup releasing a volume and make it a DCR method.
289 kes Improve algorithm for detecting pre-reserved volume and
292 kes Tweak volume swapping code so it works.
293 kes Correct name overloading in mount.c
294 kes Replace released flag in VOLRES with reserved and add access
295 methods for the VOLRES class.
296 kes Prevent volume from being released while being swapped.
297 kes Refactor parts of stored/mount.c
299 ebl Add sanity checks for VolWriteTime and VolReadTime
300 ebl Take care of bad clock changes while computing VolWriteTime
301 and VolReadTime. This should fix or limit #1066
302 kes Correct error string numbers in dird/catreq.c
303 kes Restructure reserving, acquiring, and mounting volumes. Calls to
304 autochanger are deferred for mount.c -- simplifes the code.
306 kes Do not prune any running job. It just fails the job.
307 kes Lock the volumes when changing dev->reserved_device and marking
308 the volume unused otherwise the device can get reserved by
309 another job before the volume is released, thus blocking it.
312 Beta Release Version 2.2.9-b7
314 kes Close bat console windows first to eliminate error message
316 kes Remove useless code in Scheduler that causes seg fault on
318 kes Correct some SD catalog request error messages.
319 kes Don't allow pruning of any running job.
320 kes Turn off code in read_record that causes a seg fault in the SD
321 when reading past an EOS_LABEL.
322 kes Turn off unloading the autochanger in reserve.c as it just
324 kes Lock volumes when unreserving a device.
325 kes Do not mark volume unused when recycling.
326 kes When acquiring, don't mark volume unused if it is reserved (busy).
328 Beta Release Version 2.2.9-b6
330 kes Eliminate ./configure warning on po directory
331 kes Fix bug #1063, reuse of freed ptr in list nextvol.
332 kes Release regex compile buffer in filed/job.c
333 kes Add proper type of const char in sql_create.c
334 kes Turn off debug in daemon termination routines
335 kes Move free_volume_list() before devices are freed in stored.c
336 kes Fix reference to uninitalized stack variables in bregex.c.
337 This should correct bug #1067.
339 kes Fix possible seg fault in SD when freeing a volume entry.
341 kes Apply patch from bug #1069 that corrects spurious error messages
342 when ACLs enabled on SGI but no ACL exists.
343 ebl Fix a storage deamon segfault at debug level 500.
345 Beta Release Version 2.2.9-b5 -- not released
347 Beta Release Version 2.2.9-b4
349 kes Re-enable code to remember last volume mounted on a non-tape
351 kes Add patch supplied in bug #1068 that fixes a SD crash when using
352 a Virtual autochanger.
353 kes Generate correct JobMedia records during spooling/despooling when
354 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
355 <tih@hamartun.priv.no> for excellent analysis and testing.
357 Beta release Version 2.2.9-b3
359 kes Rework certain SD locking based on gdb tracebacks of deadlocks
360 sent by Eric. This code now uses only the volume_lock() rather
361 than the reservations lock when at EOM and acquiring a new
363 kes Ensure only one exit point in several subroutines.
365 Beta release version 2.2.9-b2
367 kes Fix to initial tape drive open to release the volume name
369 Beta release Version 2.2.9-b1
371 kes Fix to JobMedia fix.
372 kes Fix bug pointed out by Peter Much that causes the StorageId to
373 be updated when reading a tape (during migration, it could have
374 been incorrectly set to the write StorageId).
376 kes Implement autostart scripts for Debian
378 kes Fix mtx-changer.in for broken Debian mt program.
380 kes Massive commit of all fixes and back ports to create 2.2.9
382 kes Apply doc fix from bug #1062.
383 kes Resolve crash and improper restore wx-console Win32 restore
384 GUI. Fixes bug #1065.
385 kes Update Win32 wxWidgets to latest version.
386 kes Attempt to do correct handling of Win32 mount points. Should
388 kes Fix Win32 FD backup/restore memory leak due to improper termination
389 of BackupRead/Write. This fixes bug# 1038.
390 kes Add const to AIX prototype for initgroups()
392 kes Undo bug #1047 heap overrun fix as it is not correct.
394 kes Fix creating first JobMedia record during Migration to include
395 proper index. This caused slow restores of migrated jobs.
397 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
398 and do not strip paths on symbolic links.
399 kes Set catalog backup database and user name from values specified on
400 the ./configure line.
401 ebl Apply patch to correct bug #1031, about wrong pool source information
404 Release Version 2.2.8
406 kes Apply patch from Martin to correct bug #1040, bscan sets existing
408 kes Fixed important spelling error in doc -- bug #1045.
410 kes Move initialization of read/write res lock earlier in the code.
411 This fixes the crash with a null conf file. This fixes bug
413 kes Redefine CURES in lib/parse_conf to be URES and move it all
414 into lib/parse_conf.c -- this responds to bug #1042, but does
415 not fix it. The fix is not to compile with FORTIFY_SOURCE.
416 kes Backport fix de-referencing a NULL pointer in the scanner from
417 the trunk SVN. I don't think this was reported as a bug.
419 Beta release Version 2.2.8
421 kes Re-enable the new job code editing (%f).
423 kes Fix bsnprintf for float point numbers. I broke recently when
424 parameterizing some variables. This fixes bug #1036.
426 kes Move Heartbeat documentation from Job to Director resource.
427 This fixes bug #1033.
429 kes Fix existing switch drive SD code to call autochanger to release
430 any old volume. This must be done to keep the autochanger from
431 releasing subsequently newly reserved volumes in doing a close().
432 This should possibly fix bugs #1032 and #1018.
433 kes Apply big backport of current SVN SD code that corrects a number
434 of race conditions. This is a first step in fixing bug #1018.
436 ebl Fixes bug #1028 where "Selection Type" option was not usable
440 Release Version 2.2.7
442 kes Partial back out (disabled) %f job code editing because it
443 does not build on Win32.
444 kes Fix seg fault Frank Sweetser reports in regression testing
445 on his systems. The problem was that the original author of
446 bsnprintf.c did not take into account the side effects of
447 using ++x in the argument to a #define.
449 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
450 that implements double quoting include names in conf files,
451 and also allows piping input by having the first character
452 be a vertical bar (|).
453 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
454 that implement %f in RunScripts to pass the FileSet name.
455 kes Skip leading | when lex input comes from a pipe as suggested
456 by Michael Stapelberg <michael@stapelberg.de>.
458 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
459 Nerijus Baliunas <nerijus@users.sourceforge.net>
461 kes This patch corrects a problem where the maximum concurrent storage
462 jobs counter gets out of sync during restore jobs causing jobs to
463 'wait on max Storage jobs'. This patch fixes bug #1009.
465 kes Add new include to postgresql.c suggested by Marc Cousins so
466 that it compiles correctly with pgre version 8.3. Also fix
467 misuse of %x with pointer (should be %p).
469 kes This patch fixes bcopy so that it produces correct Volumes.
471 kes This patch eliminates spurious output to the console during a VerifyVolume
472 job that contains encrypted data. It fixes bug #1024.
474 kes This patch prevents the 'status dir' command from trying to use a scratch
475 volume and possibly moving it from one pool to another. This patch fixes
478 kes Fix --archivedir addition to configure. Replace it with
479 --with-archivedir in configure.in This fixes the regression
481 kes This patch fixes bug #1012 where the job is canceled because
482 of Max Run Time exceeded when the job has not yet started.
484 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
485 one 'part' to write. Instead of each part being stored on disk,
486 written to DVD, then deleted from disk, all parts are written to disk,
487 and only the last is written and deleted from disk.
489 kes Correct typos in disk-changer.in
491 kes This patch fixes the status command to include the formating string for
492 JS_AttrInserting. It fixes bug #1021.
493 kes This patch should fix the Mac OS X build problem on the latest
494 Darwin, where sys/types.h was not included correctly (apparently
495 due to a change in the Mac headers). The solution was to explicitly
496 ensure that it is defined for the ./configure.
497 This patch also has a rebuild of configure that includes the Debian
498 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
499 kes This patch should ensure that queued messages to the console are
500 displayed as soon as possible. It should fix bug #1007, but has been
501 reported not to work.
503 kes This patch fixes the infinite loop when trying to increase the
504 maximum number of volumes in a Pool during the add command.
505 This patch fixes bug #1008.
507 Release Version 2.2.6
509 kes Get fix for joblist bug in bat from trunk.
511 kes This patch fixes bug #1003 where putting the message output from
512 a Verify job into the catalog results in a recursive loop. The problem
513 seems to show up only with postgresql (to be verified).
515 kes Fix bug #942 where lots of emails where generated when the heartbeat
516 interval was low and Bacula wanted a different tape from the one in
519 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
520 which was updated during a restore (or a reading migration) bug #982
522 ebl Use qmake-qt4 instead of qmake when available (debian system).
524 kes Add a security warning to src/cats/make_catalog_backup.in indicating
525 that passing the password via the command line (arg 3) is insecure.
526 This responds to bug #990 (it doesn't fix it).
527 kes Apply 2.2.5-postgresql-errors.patch
528 kes Remove unneeded File table index on JobId, which is already
529 present as the first index of another multi-index.
531 kes Set default debug_level to zero. This corrects bugs #991 and #993.
532 kes Fix a crash in bat when it cannot connect to the Director for example
533 if the Director is not running.
535 kes Activate Close button on tray-monitor window. This fixes
538 kes Fix spurious warning message printed when creating a volume with
539 a LabelFormat. This fixes bug #976.
541 Release Version 2.2.5
543 kes Add JobId in place of Job name in all the Jmsg() output.
544 kes Correct the APP_DESC for the Win32 storage service (remove an e).
546 kes Add new SD despooling attributes and Dir inserting attributes
547 job status codes. This fixes bug #961.
548 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
550 kes Fix doc issue. This fixes bug #963.
551 kes Fix listing performance problems in bat. Pointed out by
553 ebl Fix replace on restore. This fixes bug #969
554 kes Fix bat code that tests for Win32. This should fix bug #968
555 kes Query 5 list wrong Vol after migration. This fixes bug #960
557 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
558 in back porting from 2.3.x
560 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
561 The details are included in the notes in this file.
563 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
564 messages; it fixes a problem opening the SQLite3 database when multiple
565 simultaneous jobs were running; it fixes a bug with certain versions of
566 MySQL where batch inserts failed because of table name character case
567 (upper/lower) differences.
568 kes Fix race condition that drops final block written to volume.
569 This happens in rare cases with multiple simultaneous jobs
570 when the Volume fills. This fixes bug #964. May be related
571 to bug #935 and possibly #903.
573 kes Fix FD->SD authorization failure, which was due to spurious
574 wakeups from a pthread_cond_timedwait(). Simply check the
575 predicate before continuing. This fixes bug #953
576 dvl Add new configuration item --archivedir
577 dvl Adjust regression tests to use tmp not /tmp. This will allow
578 multiple concurrent runs of the regression tests.
580 kes Eliminate more strerror() and replace with bstrerror().
581 kes Remove BSD getopt and replace with unrestricted IBM version.
582 kes Fix Win32 build for changed calling sequences.
584 kes Fix FD->SD authorization failure, which was due to spurious
585 wakeups from a pthread_cond_timedwait(). Simply check the
586 predicate before continuing. This fixes bug #953.
587 kes Add const char where needed (more to do).
589 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
590 kes Don't overwrite error message in check_tables_version.
592 kes Unlock batch insert tables with same calls used elsewhere.
593 kes Allow starting 59 jobs a second.
594 kes Make SD session key more random.
595 kes Add retry for SQLite opening db if it fails. Probably helps
597 kes Suppress extra error messages during batch insert failure.
599 kes Put some FD auth code on dbglvl rather than fixed.
600 kes Return insert attributes error message in db msg buffer to avoid
601 false error messages. Helps fix bug #966.
602 kes Separate batch init error messages. Probably helps fix bug #966.
603 kes If Dir gets an error during inserting attributes, cancel SD.
604 This reduces unnecessary error messages.
606 ebl Cleanup batch insert code. Probably fixes bug #965.
608 kes Turn off some code when batch insert not enabled.
609 kes Edit FD name in connect error messages.
611 kes Add code to handle tray monitor separated from Win32 FD.
612 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
614 kes Fix ANSI tape labeling. This fixes bug #954.
615 kes Increase the max block size to 4MB fixes bug #957.
616 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
617 is not properly mounted (recognized) during a poll.
618 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
619 Job that has differences reports Verify OK.
620 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
622 Release Version 2.2.4
624 kes Increase size of name string when FD making connection to SD.
627 kes Add waits to multiple exit detection code to try to force pid
628 file to always be deleted.
629 kes Restore good dev.tar.gz to rescue set appropriate binary property.
631 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
632 trying to switch drives by checking for blocking before unblocking.
634 kes Cancel storage daemon in all cases where FD reports error. This
635 should fix virtually all cases of bug #920.
637 kes Fix error message that was clobbered when Dir tells SD it does not
638 have write permission on Volume. This should fix a minor point
639 in bug #942, but not the main problem.
640 kes Add code to cancel job in SD if FD connection fails. This should
642 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
643 kes Fix migration code to get correct Volume name with multiple volumes
644 by skipping |. Fixes bug #936.
645 kes Implement patch supplied by Landon to fix bug #944 where using
646 TLS with bconsole uses 99+% of the CPU.
647 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
649 kes Move patches into patches directory.
651 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
654 ebl Using 'm' in bconsole will show messages like before,
655 and not memory usage.
657 Release Version 2.2.3
658 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
661 kes Fix bug #935, and probably also bug #903 where files were not
662 restored. MediaId was not properly set in JobMedia record after
665 kes Add ./configure search in qwt-qt4 for qwt package
666 kes Apply Martin Simmons patch that should turn off the new API usage
667 when batch insert is turned off allowing building on older
670 Release Version 2.2.2
672 ebl Detect if new PosgreSQL batch insert API is present.
673 kes Correct incorrect mempool call causing Director crash.
674 sb Update spec files for 2.2.1 release
676 Release Version 2.2.1
678 kes Update POTFILES.in
679 kes Cleanup a few underquoted AC_DEFUNs in configure
680 kes Apply patch from Martin Simmons that adds a test for va_copy to
683 kes Fix bug #921 by increasing the number of tries to create a new volume
685 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
686 can be called multiple times. Implement a version for machines
687 without va_copy() that gets a big buffer.
689 kes Integrate more portable zone offset code into bsmtp.c
690 Submitted by Attila Fülöp.
692 kes Fix bad SD->FD return status reported by
693 (James Harper) <james.harper@bendigoit.com.au>
694 ebl Fix a bug in read_close_session which return random status
695 thanks to James Harper
697 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
698 and directory names during restore of single file/directories.
699 kes Add sanity checks to .sql command when string is empty. Hopefully
700 that will resolve Dirks Director crash.
702 kes Apply patch submitted by Martin Simmons that corrects a seg fault
703 in the bsmtp chat subroutine when debug is >= 10.
705 kes Fix Director crash when running bat SQL queries.
706 kes Add David's notes on Item 8: Copy pools.
708 kes Rework projects file to be current and ready for a vote.
709 kes Enhance lex scanner error message.
711 kes Tweak LICENSE file to mention BSD code.
712 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
713 if specified on the ./configure.
714 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
715 This class is intended to allow us to open a second bsock to the
716 Director while in the restore subdialog.
718 kes Fix configure to create bat Makefile before creating dependencies.
719 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
720 kes Add a tooltip to the tray monitor.
721 dvl Set the Director's PID file before dropping privs. This fixes
724 kes Update AUTHORs file
725 kes Increase the default max concurrent jobs to 20 in FD and SD to
726 correspond with the default .conf files.
727 kes Rewrite the Win32 service routines. This eliminates the 3 copies
728 some different, of the same file created by RN when porting the
730 kes Rearrange some of the Win32 directories and the placement of the files
732 kes Set DEVELOPER flag in version.h
734 ========================================================================
735 Release Version 2.2.0
737 kes Apply a second doc patch from Marc.
738 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
739 improves the tips section that discusses how to setup multiple
742 kes Update bat README file.
743 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
744 corrects a typo in the Recycle status check in db_find_next_volume().
745 This will probably fix a number of annoying problems with multiple
747 kes Modify most of dird/msgchan.c to use bsock class calls rather than
748 bnet calls -- no functionality change.
750 kes Modify the Verify output to specify if files are missing on
751 the Volume(s) or disk. Fixes confusion in bug #916.
752 kes When more than one Volume is read in a migration job, the last
753 Volume bytes reported are from the last read volume rather than
754 the last written volume. Fixed. This fixes bug #910.
755 kes Fix display of Recycle flag after update volume=foo recycle=yes.
756 It previously printed New Recyle flag is: no. This fixes bug
759 kes Correct seg fault when switching tape drives during restore.
760 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
761 be used until after 2.2.0 release.
763 kes Remove fnmatch() in SD that permitted wild card specifications.
766 kes Fix %g in filename returned by SQL for browse tree reported by
768 kes Fix configure so that it puts config.out in the cwd rather than
770 kes Attempt to fix the locking problem reported by Eric in bug #906.
771 kes Make berrno class to leave errno unchanged after constructor call.
772 kes Make bnet_server use the heap rather than the stack to allocate
773 its socket fd pointers to avoid a crash at termination. Problem
774 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
776 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
777 and putting it in depkgs-qt along with Qt4.3.
779 kes Rework code in acquire.c that switches drives for reading when
780 the Media Type does not match. This should fix bug #906
782 ebl Fix a director segfault during job setup #907
783 kes Correct seg fault in postgresql when first operation returns no
784 rows. Fixes Dirks File browser problem seg fault with bat.
786 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
787 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
790 kes Implement PopUp YES/NO dialog for bat.
792 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
794 kes Correct RunScript to terminate job in FD on failure.
795 kes Change abort_on_error and AbortJobOnError to fail_on_error
796 and FailJobOnError in RunScripts.
797 kes Minor tweaks of code formating in RunScripts, principally to
798 avoid depassing 80 columns.
800 kes Eliminate one #ifdef Win32 in bsmtp
801 kes Implement grow tool to grow a file for testing very large databases.
802 kes Add big-vol-test to test Bacula seeking with > 5GB.
805 kes Modify find_next_volume() to return all values in Media record.
806 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
810 kes Update Release notes
812 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
813 Warning, in previous beta version, all media get from scratch keep their
816 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
817 This should fix bug #842. Made a note to look at removing the temp
818 files at the end of the install.
819 kes Add ability to mount and unmount a file device providing it is
820 marked as being removable and has the appropriate mount and unmount
821 commands defined in the Device resource. This fixes bug #830.
822 kes When applying a storage override, release all previous storage
823 definitions rather than just prepending the new storage.
824 This should prevent a good deal of confusion.
826 kes Implement ./configure search for qwt libraries.
828 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
829 Win32 FD. This should fix bug #893.
830 kes Remove an unnecessary beep in Win32 init code.
831 kes Update copyright dates in Win32 executable about boxes.
832 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
833 code with a BSD getopt.c and getopt.h.
834 kes Remove sched.h from the Win32 compat directory -- not used.
835 kes Remove the Exit menu item from the Win32 tray monitor. If you really
836 need to shut it down, do it through the services panel or the command
838 kes Remove some inappropriate Bacula FSFE copyrights.
839 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
840 kes Fix regress config non-portable test as pointed out by
841 Florian Heigl <florian.heigl@gmail.com>
842 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
843 as pointed out by Florian Heigl <florian.heigl@gmail.com>
845 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
846 Reported by Frank Sweetser.
850 kes Fix client-only build.
851 kes Integrate client-only fixes for bsys (initgroups) and conio from
852 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
853 kes Make arguments to get_scratch_volume() in same order as other
855 kes Rework the prune_volumes() subroutine so that after purging and
856 no volume found in desired pool, it will check for a scratch
857 volume. This prevents recycling the whole scratch pool.
858 kes Add code to status storage to print boffset_t (largefile support).
860 kes Move qwt (Graphics libarary for Qt4) to depkgs.
861 kes You now need a --with-qwt=<dir> to be able to build bat.
862 kes Update src/win32/cats/bacula_cats.def to include the new
863 db_get_query_dbids() call on Win32.
865 kes Correct a problem when selecting a scratch volume and moving
866 it to another pool that lost some columns.
867 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
868 kes Enhance Autochanger error messages to include Volume and device name.
869 kes Rework prune_volumes() code to take account of InChanger flag,
870 and to handle recycling volumes going to the Scratch pool and
871 current pool because the RecyclePool directive.
872 kes Implement a better and more efficient db_get_query_dbids() to
873 handle creating and passing back a list of DBIds.
877 kes Start work on new more efficient DBId subroutine. First use
878 will be for recycling volume to Scratch inchanger.
879 kes Increase number of JobIds in pruning from 1000 to 10000.
880 This to be replaced by above routine.
881 kes Begin implementation of building Qt4 on Win32.
882 kes Correct typo in fix I added for bad TLS shutdown.
883 kes Pull 2.0.3 patches into patches directory.
884 kes Update Release notes. Include qt-console in line count.
885 kes Update Projects file.
887 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
888 bug in migration code where a job that spanned two volumes
891 kes Implement new BST_DESPOOLING blocked state. Change from locking
892 during despooling in SD to blocking. This means that other threads
893 can work with the device structure, in particular the reservations
894 system while despooling.
896 kes Fix return in reservation message queue that missed clearing
897 the jcr lock (implemented 26Jun07 below).
898 kes Rename a number of dev methods to make locking function names
900 kes Document locking in lock.c. Move lock structures to new file
903 kes Move reservations message lock to lock jcr only this
905 kes Move main SD locking code into lock.c (new file).
906 kes Update Win32 build to include lock.c
910 kes Dirk committed the qwt library code for drawing graphs in bat.
911 kes Tweak install of qwt so that it is integrated with ./configure.
913 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
914 out by Eric (my typo).
915 ebl Fix configure.in to get batch mode enable
916 kes Return correct string from authenticate.cpp in bat when connecting
918 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
919 spurious line drops when using TLS.
920 kes Do not file reparse points when restoring a file that already
923 kes Implement Windows reparse points -- similar to directories, but
924 we do not descend into it. This is a first cut. They seem to
925 be backed up, but restore is not yet tested.
926 kes Remove restore_blocking in tls code when shutting a socket to leave
927 it in blocking mode. Hopefully this will fix the encryption bug
928 reported by Frank Sweetser.
929 kes When opening a file for backup, tell the OS that we are going to
930 read it sequentially -- optimization.
931 kes Change variable names in authenticate_director() to not conflict
932 with member names in bat. Caused great confusion with compiler,
935 kes Queue openssl error messages in case of comm problem.
936 kes Do shutdown() call if socket terminated.
937 kes Remove some duplicated code in tls.c
938 kes Move more of the bsock member variables into private and access
940 kes Add Frank Sweetser's tls-test to the regression suite.
942 kes Add Swedish sv.po file
944 kes Don't print clock skew message in FD if less than 3 seconds diff.
945 kes Add a bit of VSS info to status client.
946 kes Implement a first cut of Vista VSS, using Win2003 code.
950 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
951 loaded tape but uses first drive).
952 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
953 This was indeed a Win32 issue.
955 kes Simplify search of autochanger for in-use Volume.
956 kes Fix exit condition of check for in-use volume. kes Remove
957 inappropriate my_postgresql_free_result() in db_close()
959 kes Fix bad return in FD when encryption signature not found.
960 Probably caused a crash.
961 kes Inhibit missing encryption signature error messages for
962 file types where no signature computed.
963 kes Correct inverted check on autochanger in reservation system.
964 kes Tweak debug code in autochanger reservation.
966 kes Add some additional locking in the cats directory in subroutines
967 that modify packet variables called from batch insert.
968 kes Rework how dcrs are allocated. new_dcr() can now be called
969 with an existing pointer, and it will simply clean it up.
970 This allows the reservation system to test various different
971 devices, and will permit easy device changes.
972 kes A bunch of changes all over to handle new new_dcr() calling
974 kes Work more on the Volume management in the SD. Remember Volumes
975 for tape drives and for autochangers (even virtual disk changers).
976 kes When looking at the Volume list to reserve a drive, handle
977 autochanger names correctly by interating through the changer
978 devices. Also call the Director to see if a Volume is suitable
980 kes Fix some bugs in bscan. Make sure all media records are written.
981 Make sure that valid JobMedia records are written for disk files.
982 Previously they were completely wrong.
983 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
984 that the URLs don't change and so that the developers will all
985 work off the same copy. Rebuild from scrach.
986 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
990 kes Fix seg fault in FD from incorrect digest size.
991 kes Fix argument to non-OpenSSL crypto.c subroutine.
995 kes Remove a few malloc()s from the encryption code.
996 kes Use the class calls to bsock in filed/backup.c and restore.c in
997 place of the old bnet_xxx code.
998 kes Implement code that does an on the fly calculation of the
999 signing digest during restore of encrypted files. It makes
1000 a best guess at the algorithm, and if it is not correct, will
1001 then revert to the old code which reads the file after it is
1003 kes Implement at least one missing crypto stream in stream_to_ascii()
1004 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1005 #877 where a reload with bad syntax causes Dir to exit.
1007 Cut: 2.1.14 beta (not released)
1009 kes Do not free a volume on a tape drive until another volume is
1010 mounted and read, or the autochanger unloads the volume.
1011 This should help the SD re-use volumes that are already mounted,
1012 and should fix bug #886.
1013 kes Apply patch from user brettedgar that allows gnome2-console include
1014 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1015 kes Apply patch from Lucien Weller that fixes day of week calculation
1016 because of DST flag problem. Fixes bug #887.
1018 kes Move find_next_appendable_volume() to after acquiring a valid device
1019 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1021 kes Unable to reproduce bug 872. However added additional testing for
1023 kes Bug #874 resolved by documenting SQLite limitations.
1024 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1025 kes Bug #881 resolved by removing typo in mtx-changer script.
1026 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1027 approval. Added a link to the wiki on the web page, and implemented
1028 a backup from http://paramount.ind.wpi.edu
1030 kes Fix update allfrompool to pass pool name.
1032 kes Convert to pure GPL v2 license.
1033 kes Fix sscanf problems reported by Peter Buschman that caused
1034 a bus error on Solaris.
1035 kes Rework (simplify) the select prompt in bat.
1036 kes Move get_jobid_from_tid() into lib and create a
1038 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1039 should definitely fix the problem of lost error messages in the
1041 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1042 kes Eliminate tcpd.h from the project. Enclose the #include from the
1043 library with extern C ...
1044 kes Add print of signal name when a signal is trapped.
1046 Release: 2.1.12 beta
1048 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1050 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1051 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1052 makes SQLit3 run 30 times faster, though a bit less safe.
1053 kes Implement --with-batch-insert in configure and detection of thread
1054 safe libraries. It is on by default, but turned off if no thread
1055 safe library (e.g. SQLite 2) is available.
1057 kes Fix Bacula PostgreSQL buffer overruns.
1058 kes Do better checking for NULL results returned from PostgreSQL;
1059 implement retry for failed queries; clear results buffer after
1060 failed query. Hopefully this will correct the PostgreSQL failures.
1062 kes Implement algorithm to handle only one appendable volume with
1063 Prefer Mounted Volumes = no.
1064 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1065 returned from a query.
1066 kes Make volume lock recursive.
1067 kes Implement an additional volume reservation algorithm that
1068 starts by considering all reserved volumes then uses the
1069 old brute force algorithm of searching the resources to
1070 find a suitable device.
1071 kes Add new reservations debug code and refine the old code.
1072 kes Update the win32/dll/bacula.defs file.
1074 kes Tweak reservations algorithm to permit a few more cases, i.e.
1075 volume reserved, but on different drive, ...
1076 kes Enhance SD status to include Pool and Media Type for drive in a
1077 more readable format (a bit longer).
1078 kes Fix PostgreSQL double free.
1080 kes Minor refactoring of restore decryption code.
1081 kes Add code to smartall.c to detect double free of a buffer.
1083 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1084 so that bsmtp will create a correct email address (mailbox only).
1085 kes Modify 'memory' command so that the buffers are listed as 'In use'
1086 to avoid confusion with Orphaned buffers.
1087 kes I reworked the OpenSSL include/lib flags to be handled in
1088 the standard Bacula way, which should fix bug #863 concerning
1089 non-standard OpenSSL libraries.
1091 kes Implement Help Browser window for bat.
1092 kes Fix reload bug that reset StorageId to zero.
1094 kes Fix TLS #ifdefing when TLS turned off.
1095 kes Ensure that when labelling a tape with Slot=0 that InChanger
1097 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1099 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1100 add DISTINCT (required by PostgreSQL).
1101 kes Implement BSOCK authenticate_director() method. Eventually will
1102 authenicate all daemons.
1103 kes Move several more functions into the BSOCK class.
1105 kes Add code to tell the OS that we no longer need a cached
1106 file that we were reading. In findlib/bfile.c. Also,
1107 only cache files that we are reading. Thanks to
1108 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1109 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1110 kes Implement script to automatically generate cats and dll .def
1111 files for Win32 dll.
1112 kes Update README.mingw32 to include new .def file generation.
1113 kes Correct typo in UTF-8 error message as reported by:
1114 jhernandez <julianhernandez@gmail.com>
1115 kes Add additional sm_check() code on debug level 1.
1116 kes Set default debug level to 1.
1117 kes Trap SIGABRT in attempt to get traceback.
1119 kes Reduce bat connect timeout from 30 to 15 seconds.
1120 kes More restructuring and implementing BSOCK class in place of
1122 kes Remove a few unnecessary malloc() tests in crypto code.
1123 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1124 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1125 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1127 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1129 kes Fix Verify InitCatalog. The attributes were not pointing to the
1130 correct saved location.
1131 kes Implement message callback so that GUI is sure to get all
1132 daemon messages. Currently displayed in a dialog in bat.
1133 kes Ignore SIGUSR2 (Bacula timer) in bat.
1134 kes Apply regress patch from bug #859 to allow regress to work
1135 with Solaris compiler.
1137 kes Begin adding TLS support to bat.
1138 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1139 clean up lex.c and make it more readable.
1141 kes Move more bnet functions into the BSOCK class.
1142 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1143 kes Complete change of berrno strerror() method to bstrerror()
1145 Release: 2.1.10 beta
1147 kes Cleanup incorrect email addresses in bsmtp.
1148 kes Make bat display initial messages rather than discard them.
1150 kes First cut of adding .mod to the run command.
1151 kes Implement auto display of messages in bat.
1152 kes Enhanced preferences to allow all Bacula output to be
1155 kes Try to make bsmtp date routines more generic.
1156 kes Fixed bug #856 autochanger documentation.
1157 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1158 kes Add new cats entry point so Win32 builds.
1160 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1162 kes Do better checking for the MySQL 64 bit libraries looking for both
1163 .a and .so libraries.
1164 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1165 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1166 kes Require the thread safe version of MySQL during configure. Thanks
1167 to Andre Noll for pointing this out.
1168 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1169 continuing in migration code.
1170 kes Apply implementation of tray-monitor font derived from gnome-console
1171 submitted by Andreas Piesk <a.piesk@gmx.net>
1173 kes Eliminate important memory loss in SQLite
1174 kes Fixed the batch insert MySQL thread specific data that was not
1175 being freed. See cats/mysql.c:db_thread_cleanup().
1176 kes Fix restore before command.
1177 kes Convert old hdr.name to name() in a few places.
1178 kes Implement update jobid command.
1179 kes Return all time_t dates in db_get_job_record()
1180 kes Stop watchdog in SD earlier.
1181 kes Put Pool just after Storage in please mount message.
1182 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1185 kes Update the po files.
1186 kes Fix Verify InitCatalog by making it cache attributes.
1188 kes Change name bacula-bat to bat for man 1 page to correspond to
1190 kes Check for client and store NULL pointers in status command. This
1192 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1193 kes Fix sign extended editing of %p.
1194 kes Clean out a little old #ifdefing in cats/mysql.c
1196 kes If time diff between DIR and FD is more than 600 seconds convert
1197 INFO message to WARNING.
1198 kes Implement heap size display in status for all daemons.
1199 kes Attempt to fix MySQL db open memory loss (not successfull).
1200 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1201 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1202 Query. This looks like a MySQL but but by doing extra releases,
1203 the memory goes away. This should fix bug #847.
1205 kes When backup fails, cancel SD before waiting for sd termination.
1206 kes If SD is waiting for FD to connect during cancel, wake up the
1208 kes Fix fsf code so that errno is correctly reported.
1209 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1211 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1212 so that Bacula doesn't later stumble into a seg fault.
1213 kes Use the term Restore Client in the restore Job report.
1214 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1215 the original job's FileSetId.
1216 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1217 spooling in migration jobs. Not yet tested.
1218 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1219 reading conf file from a pipe. However, do it with open_bpipe()
1220 rather than popen. Not yet tested.
1222 kes Fix an ugly bug where the VolCatBytes were getting updated
1224 kes Implement bconsole memory command that prints current memory
1225 usage, plus smartalloc dump.
1226 kes Clarify some error messages in backup, admin, and migrate.
1227 kes Shrink label dialog to smaller size.
1228 kes Invert Cancel OK buttons on restore to be OK Cancel.
1229 kes More strerror() to bstrerror() conversions.
1231 kes Start implementing bstrerror() in place of strerror().
1232 kes Stripping path -- seems to work.
1234 kes Prevent door and port files from being restored (mostly
1236 kes Free an unreleased buffer in compat code.
1237 kes Change console Job name from *Console* to -Console- to eliminate
1238 Win32 filename problems. Put Win32 path separator when creating
1239 Console file. This fixes bug #846.
1240 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1242 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1244 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1245 to force Win32 error message.
1247 kes First cut strip path. The data should be passed to the FD,
1248 but nothing is done with it yet.
1249 kes Enhance the digest and signature routines in the crypto
1250 library to accept a JCR and to use it to print error messages
1251 so that they will go in the Job report rather than the daemon's
1253 kes Simplify some of the verify signature code.
1254 kes Simplify a few of the alternative returns in the signature
1257 ebl Use only POSIX regex instead of GNU regex in breg.c for
1258 File relocation. It fix broken freebsd compilation.
1259 kes Convert all other Dir files to use new ua class message
1261 kes Tentative fix for missing digest signature in bug 807.
1262 kes Correct handle problem in new win32_ftruncate routine.
1263 kes Convert ua_purge.c and ua_update.c to use new ua class
1264 message routines for bat.
1266 kes Correct incorrect installation of LICENSE in Win32 installer.
1267 kes Display LICENSE at the beginning of the Win32 install.
1268 kes Attempt to correct the need for the png files to be installed
1270 kes Reapply my bat.conf install script in qt-console. I think I
1271 editted bat.pro instead of bat.pro.in and it was lost.
1272 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1273 the /var/lock/subsys for subsysdir. Also corrects typos in the
1276 kes First cut update job.
1277 kes Correct configure to include qmake of src/qt-console directory.
1279 kes Make restore job yes/mod/no print in one command so GUI works.
1280 kes First cut implementing backup and restore client.
1281 kes Correct editing in Verify output that caused a seg fault.
1283 kes Insure that bat.conf is not overwritten during installation.
1284 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1285 while I was implementing migration in March 2006 !
1287 ebl Cleanup file relocation, using char *RegexWhere instead of
1288 char *where + bool where_use_regexp
1289 kes Update some manpages and add bat manpage.
1290 kes Make a first cut at converting bacula.spec.in for bwx-console
1292 kes Apply patch from John Goerzen to add hostname as fourth argument
1293 to make_catalog_backup script.
1294 kes Fix typos I introduced into bsmtp.c
1295 kes Make pm_strxxx() routines handle input of NULL pointer. This
1296 is to protect from NULL pointers returned from SQL databases.
1297 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1298 kes Add more debug to FIFO code -- fix fifo regression test.
1300 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1301 kes Add thread timer to bnet_connect() to break from OS if wait time
1304 kes Update Win32 build to include new files, new symbols, and
1306 kes Implement socket level heartbeat (tcp_keepidle)
1307 ebl Commit File relocation patch
1308 kes Make bat have 'make install' target.
1309 kes Warn during install if old gnome-console binary found.
1310 kes Warn during install if old wx-console binary found.
1311 kes Add -8 option to bsmtp command line to add content type utf-8.
1312 Fixes bug #809. (Character coding problem in bsmtp).
1313 kes If < is found in target (from, to, cc) then do not enclose the
1314 target in < > in bsmtp. Fixes bug #772 (malformed address).
1315 kes When printing certain items in dbcheck, stop after 300000.
1316 Fixes bug #822. (dbcheck loops).
1317 kes Incorrect status in Dir after waiting for mount with poll set.
1320 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1322 kes Print waiting to reserve a device every 5 mins.
1324 kes Don't call close_part in label.c if tape and relabel.
1325 kes Don't free volume if busy in close() -- should help with
1327 ebl Fix #824 RunScript bug (After script could be execute twice)
1328 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1329 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1330 Add a regression script to test RunScript
1332 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1335 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1336 deprecated. No additional bugs will be fixed, and they will be dropped
1337 in a future release (probably 2.4.0).
1338 kes Change name of wx-console to bwx-console to make it more Bacula
1340 kes Change the name of gnome-console to bgnome-console to make it
1343 kes Some time in March, a Feature Request with patch from Jorj Bauer
1344 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1346 The ability for the director to validate a Client (FD) CN against
1347 an arbitrary set of patterns rather than the hostname, with
1348 A new 'TLS Allowed CN' set of directives which are implemented
1349 in the Client resource. Then pattern matching is used in place
1350 of hostname matching against the Certificate's CN. As an example, we
1351 have certificates which (a) use a local CA, and (b) have a CN of the
1353 kes Add new/changed entry points to Win32 build
1354 kes Create unaccepted-projects for projects that are not accepted.
1355 kes Simplify locking in the reservations system.
1356 kes Add more debug code in reservations.
1357 kes Make sure error condition on reserving a volume is handled correctly.
1358 kes Correct handling of volume_in_use.
1359 kes Correct handling of initializing a device.
1360 kes Move handling of broadcasting releasing a device into release_device().
1361 kes Correct attaching dcr to dev so that it is only done if device
1362 is properly initiated.
1364 kes Locking debug level tweaks in SD.
1365 kes Tweak new Volume code.
1367 kes Add exec external-command [wait-seconds] to bconsole. This
1368 executes the external-command. Note! normally external-command
1369 should be enclosed in double quotes.
1370 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1371 it should normally be off in a production system.
1373 kes Implement die command for SD so that we can force it to dump.
1374 kes Implement SD lock debug code.
1375 kes Implement new algorithm for keeping Volume list in SD. It
1376 is now owned by the device.
1378 kes Implement new code for freeing in use volumes that should
1379 resolve if not all, some of the problems of multiple drive
1380 tape conflicts described in bug 801.
1382 kes Fix gui/bacula-web/images files in svn.
1383 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1385 ebl Fix a bug in batch mode (in string escape)
1386 kes Correct migration prune SQL typo that crept in in a
1387 recent 2.1.x change.
1389 kes Move bnet_despool() into class in bsock.c
1390 kes Modify job report to include director name and Build OS.
1391 kes Move drop root privilege and check_catalog() before fork.
1392 kes Add update database scripts (version 9 to 10) to updatedb directory.
1394 ebl Check size and age of each file after its backup to see if
1395 it has changed during backup, if 'checkfilechanges' is set.
1396 The FD will do an extra check (stat(2)) after
1397 each file backup. mtime, ctime and size are compared with
1398 'before backup' information. If time or size mismatch, an
1399 error message will be generated. You must upgrade FD to use it.
1401 kes Make database name and user configurable
1402 --with-db-name=xxx --with-db-user=xxx
1403 kes Add back database type to message.c for debugging.
1405 kes Implement dir_sql() which issues an SQL query.
1406 kes Modify bat medialist to use dir_sql() and do some minor C++
1407 formatting as well as eliminating a number of pointers, simplifing
1410 kes Fix some of the mtx-changer grep commands for tape label readers.
1411 kes Convert a number of bsendmsg into the appropriate send/warning/error
1412 message class calls.
1413 kes Suppress the using database message in the .sql command.
1414 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1416 kes Add context menu for floating a window.
1417 kes Some minor cleanup and name changes in qt-console
1418 kes Add doing mt setblk 0 in Win32 mtx-changer.
1419 kes Apply Martin's bug fix to move definition of ENODATA for
1421 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1422 sqlite2 and sqlite3.
1424 kes More pruning cleanup.
1425 kes Turn on wait_for_drive by default in mtx-changer.
1426 kes Turn on Batch insert code by default as it now passes regression.
1427 kes Add ./configure --enable-bat to enable building of Bat.
1428 No install yet though.
1430 kes Implement a new .sql command for bat.
1431 kes Implement code to turn off pruning in obtaining the next volume.
1432 Pruning is turned off for the status dir command, but turned on
1433 for SD requests and for the list nextvolume command.
1435 kes Correct Qmsg() that was not updated correctly when committing a
1436 previous change (probably the recent TLS patch).
1438 kes Write new subroutine is_volume_purged() that explicitly checks
1439 if the Volume is purged, and if so marks it as such. This should
1440 resolve problems reported about needing to mount twice to recycle
1442 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1443 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1444 amount of duplicated code.
1445 kes Do volume pruning only for the Media Type desired (reduces pruning time
1446 if multiple Media Types are in the same pool).
1447 kes Implement more detailed info in the Job report for the Bacula version
1449 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1451 ebl Add bbatch tool to bench database and insert mode.
1452 Fix sql quote stuff in batch mode
1453 Fix sql stuff for mysql
1455 kes Correct problems with am/pm scheduling. Fixes bug #808.
1456 kes Implement new prunning code that prunes up to 1000 jobs at
1457 the same time. The same technique can be applied to a number
1458 of other prune/purge subroutines.
1459 kes Add an insanity check when starting a new tape job to ensure
1460 that the tape position has not been changed. If so fail the
1462 kes Fix Win32 build for dlls to add the folllowing:
1463 src/lib/bsock.c -- new file with new entry points
1464 src/lib/dlist.c -- new entry points
1465 src/cats/sql_create.c -- new entry point
1466 src/cats/sql_cmds.c -- new DATA item exported
1468 ebl batch mode cleanup bscan-test is ok now.
1469 kes Implement SD code to check length of disk volume before appending.
1471 kes Correct return status on db_batch... routines.
1472 kes Add call to db_write_batch_file_records() to migration code.
1473 ebl Fix AfterJob timing
1474 kes Move the checking of the database in initializion of the Director
1475 to after we drop privileges. This avoids the need for both root
1476 and bacula access to the DB.
1477 kes Correct a misplaced variable definition in src/filed/backup.c
1478 kes Correct how the new batch insert db_create_attributes_record()
1479 uses the arguments. Caused a seg fault in bscan.
1480 kes Implement lock() and unlock() methods in DEVICE class.
1481 Implement block() and set_block(xx) methods in DEVICE class.
1482 kes Modify bnet_connect() so that it uses time() to check for the
1483 wait time expiring (on some OSes, some system calls may not
1484 return immediately).
1485 kes Modify Verify to obtain the previous JobId when it is actually
1486 running rather than at schedule time (as it was in 1.38.x).
1487 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1489 kes When checking pid in pid file, continue running if the pid is
1490 the same as ours. This occurs on IRIX after a system crash.
1493 kes Extend new GUI API.
1494 kes Make the ua structure a class, and implement send_msg(),
1495 error_msg(), warning_msg(), and info_msg().
1497 kes Apply fix from for building wx-console on the Mac from
1499 kes Implement new select mechanism for GUI programs.
1500 kes Reorganize initialization of stackedWidgets in bat.
1502 kes Add updated nagios plugin supplied by Christian Masopust.
1504 kes More bat implementation.
1505 kes File migrate bug with Pool Occupancy using mediaid instead
1506 of jobids. Fixes bug #795.
1507 kes Fix orphaned buffers in filed backup and verify due to
1508 crypto buffers not freed during errors. Fixes bug #789.
1509 kes Extend new GUI api code to tree commands.
1510 kes Ensure that tree and dot commands check console ACLs.
1511 kes Permit marking directory with trailing slash.
1512 kes Allow 20 console connections (instead of only 10).
1514 kes Add smartctl call to bacula-sd.conf as an example of getting
1517 kes Modify jobq.c to let simultaneous restore jobs run. This may
1518 cause them to fail if they cannot get a drive.
1519 kes Add Client Connect Wait to Storage daemon to permit users to
1520 modify the time the SD waits for a FD connection.
1522 kes Correct virtual changer check which was backwards. This caused
1523 volumes to be unloaded into slots already occupied.
1525 kes Apply Command ACL filter to JobId list in restore command.
1526 kes Correct typeo in var.c patch.
1528 kes Don't let Bacula prune File or Job records for the current Job.
1529 kes Fix variable substitution pad + inc bug reported (with patch)
1532 kes Correct SQLite log table index as reported by Luca Berra.
1534 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1536 kes Begin implementing new comm signals for API.
1537 kes Fix a few places in lib/message.c where the open fd may
1539 kes Continue implementing lib/bsock.c (real class). Make jcr,
1540 who, host, and port private. There are new methods to access
1541 them for non-class use. This required touching a number of files.
1543 kes Add LANG=C to autoconf/randpass so it works with languages other
1544 than English. Fixes bug #788.
1546 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1548 You will not be able to generate Include/Exclude list any more.
1549 It will be fixed soon.
1550 If you want to use this, you can apply
1551 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1553 kes Restore of sockets created false error messages because Bacula
1554 no longer restores sockets, but the code was still trying to
1555 set the attributes on a non-existent file. Reported by a user.
1556 ebl finish RecyclePool feature
1557 Media will takes Pool.RecyclePool
1558 when moving from Scratch to a Pool or when user will do
1559 update volume=xxx frompool
1560 To use it, add RecyclePool = aPool to your Pool resource
1563 RecyclePool = Scratch
1567 kes Expand new BSOCK class adding signal() and new BNET signals.
1568 kes Begin enhancing the dot commands adding a new API function
1569 that returns more information and will make it easier
1570 to interface to the Director from a program.
1572 kes Make DEVICE fd private. Its new name is m_fd, and can be
1573 obtained with dev->fd() outside the class. This is the
1574 first of many DEVICE members to be made private.
1575 kes Implement Michael Renner's idea on having a virtual disk
1576 changer. I made some minor modifications (e.g. I did not
1577 implement the Virtual Changer directive, but simply set
1578 the Changer Command to an empty string.
1580 kes Implement a BSOCK send() method that writes the whole record
1581 in a single write() request rather than in two.
1582 ebl add update volume=xxx recyclepool=yyyy
1583 volume takes recyclepool from pool when using update volume=xxx from pool
1585 kes Fix encryption deblocking bug, which caused some restored files
1586 to be truncated. This fixes bug #763.
1587 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1588 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1590 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1591 ebl Use btime_t instead of uint64_t in media patch.
1593 kes Optimize the use of the database a bit in the Status dir command.
1594 Only open it when needed, ensure that if any previous database
1595 was opened, it is closed.
1597 kes Correct VolCatBytes bug from media patch.
1598 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1599 in the case of orphaned records.
1600 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1601 and File records in 300K chunks to be more efficient. This
1602 idea came from Juan Luis Frances (if I remember right).
1603 kes Apply Eric's scratch patch that moves a purged Volume to
1604 the RecyclePool. Question: how is RecyclePool set? what
1605 happens to the ScratchPool?
1606 kes Apply Eric's media patch that collects read/write media
1607 times as well as byte counts. This patch requires a
1608 simultaneous upgrade of the DIR and SD. Note, there
1609 should be some way to turn off timing. I'm not sure
1610 times are in Bacula units.
1611 kes Apply Eric's batch-insert patch.
1613 kes Update projects list.
1615 kes Implement Include/Exclude file lists in FD as dlists using
1616 the new dlistString class. This permits efficiently having
1617 large include/exclude lists and completes project Item 25.
1618 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1619 console is authorized to cancel the job. This fixes bug
1621 kes Modify SD so that the VolCatJobs medium record is updated
1622 at the beginning of a Job rather than the end. This
1623 fixes bug #775 where exceeding MaxVolJobs caused jobs
1625 kes Added a mutex around getting and setting Volume information
1626 so that multiple simultaneous jobs will single thread.
1628 Switch to using Subversion
1629 kes Remove src/pygtk-console/ from configure
1631 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1632 plus the entrypoints.
1633 kes Apply patch supplied that corrects debug print
1634 in canceling jobs for max run time. Supplied as
1635 part of bug #621, which was previously fixed.
1637 kes Test on job_canceled() and sd_msg_thread_done inside
1638 loop starting the message thread to avoid a race condition.
1640 kes Remove rl_catch_signal from console.c as it conflicted
1641 with the header definition. Fixes bug #765.
1642 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1644 kes Clarify some stored/acquire messages to indicate if the
1645 problem is with read or append.
1647 kes Fix memory leak with storage ids in cats/sql_get.c
1648 kes Terminate watchdog earlier to avoid reference to released
1649 memory -- reported by Jason Austin.
1650 kes Move closing the database from jobq.c to the director daemon
1651 termination routine. This fixes memory leaks for shadow jobs
1652 (i.e. migration jobs).
1653 kes Free up the unique jobid chain items in migrate.c. This fixes
1654 a memory leak problem.
1655 kes Convert some ugly looking for statements to use foreach_alist
1656 in findlib/find.c. This will facilitate converting the structures
1657 to use dlist (for large include/exclude lists).
1658 kes Fix a bug in the btree.c and btree.h routines, then rename them
1659 rblist and add them to be built in src/lib. Include some new
1660 methods written by Rudolf Cejka that make the code more readable
1661 (hides some of the ugly casting).
1662 kes Add set_next() and set_prev() methods which make the code much more
1663 readable. Also add a new dlistString class that facilitates storing
1664 strings in dlists. To be used in the large include/exclude lists.
1665 kes Make some trivial modifications to lib/tree.h that use rblist
1666 rather than dlist for storing the tree links. This was suggested
1667 by Rudolf Cejka. The result of this is that the restore tree now
1668 uses red-black binary trees rather than simple linked lists. This
1669 should give rather dramatic speed improvements for directories
1670 contining large numbers of directories/files (more than 10000).
1672 kes Fix maxruntime bug #621.
1674 ebl Implement the include JobID in spool file name project.
1675 kes Reorder projects file in order determined by Jan 2007 vote.
1676 kes Implement item #12 on project list -- quick release of FD by
1678 kes Fix open of SQLite3 db where user does not have write permission
1679 so that DIR does not crash. Fixes bug #761.
1681 kes Add back missing @ in Win32 Makefile.
1682 kes Change 'Device not configured to autolabel' from INFO
1684 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1685 which should restart an indefinite # of times.
1686 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1687 other DIR specifications.
1689 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1690 Fix path quoting in SQLite scripts.
1691 Fix problems with SHGetFolderPath.
1693 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1695 kes Fix Job restart on error bug that promotes an Inc to a Full
1696 backup. This should fix bug #755.
1697 kes Add qt-console and first cut of code.
1701 kes Fix Bacula->Documentation link on Win32 to point to index.html
1702 instead of bacula.html. Fixed bug #750.
1703 kes Return JobId in db_get_job_record() when JobId==0. This should
1705 kes Do not release source pointers when restarting a failed job.
1707 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1708 This *should* fix bug #747.
1709 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1712 kes Modify USTORE constructor to set an empty store_source string,
1713 and don't copy the store_source string in a cancel. Hopefully
1714 this will fix Arno's seg fault, bug #744.
1715 kes Add back code to disable conio in configure. Fixes bug #743.
1716 kes Correct the Options scanner in the FD to correctly handle
1717 SHA1 option, which was eating the next option. Reported by
1719 kes Add code to indicate when the SD is spooling, spool wait, and
1720 despooling as requested by Alan Brown.
1722 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob