1 Technical notes on version 2.4
5 kes Ensure that SD tried to mount a volume not in an autochanger
6 at least once before asking for operator intervention.
7 kes Fix a pthreads bug in the Win32 pthreads emulation code.
11 kes Clear in-use bit on vol when unused while swapping.
13 kes Remove sleep at end of ./bacula
14 kes Clear hash packet for hardlinked files correctly. This corrects
15 a long standing bug where hardlinked files selected individually
16 would occasionally not be restored.
18 kes Apply Eric's patch to ensure that autoprune does not return
19 a Volume not in the autochanger unless requested to do so.
20 kes Correct bat restore display of multiple drives. This fixes
22 kes Do find_a_volume() each time an unload is done. This
23 fixes the failure of maxvol2-test.
25 Release Beta version 2.4.1-b2
27 kes Use Qmsg() in job.c watchdog callback.
29 kes Release main control rwlock if ABORTing.
30 kes Make watchdog connect timeout queue messages rather than sending
31 directly to avoid lock conflicts with the real thread.
32 kes Remove const char that causes problems with Python, which has
33 older 'incorrect' headers.
34 kes Add const char in dbd.c to avoid compiler warnings.
36 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
37 mt. This fixes bug #1116.
38 kes Fix failure of 2drive-concurrent-test. Always read label;
39 clear_unload() only after drive is defined in acquire_for_read().
41 Release Beta version 2.4.1-b1
43 kes Back out bad src/lib/base64.c change.
45 kes Generally clean up the manual tape loading code. The main
46 conceptial change is that when a volume is marked to be unloaded,
47 its volume name is retained, and it is only marked as unloaded
48 when either the autoloader says it is unloaded or another tape
49 is read on that drive.
51 kes Fix a recycling problem with two autochangers reported in bug
52 #1106. This may also (unlikely) fix a second recycling bug as
54 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
56 kes Fix format problem in bscan output reported in bug #1105.
58 kes Copy more data when restarting a job so that run
59 overrides are kept. This should fix bug #1094.
60 kes Backport updates to jobq.c where possible.
62 kes Fix bug where SD did not ask operator if the device could not
63 be opened. Reported by Eric.
65 kes Add dbuser to DIR conf file (replaces user).
66 kes Add --with-db-password to ./configure
67 kes Fix regress to handle db_password.
68 kes Fix a couple of pedantic compiler warnings.
69 ebl Fix bug when starting a restore on a storage that doesn't
70 have the requested MediaType.
72 kes More work on word alignments -- eliminate all ints from
73 the configuration routines.
75 kes Fix bug reported by Scott Barninger where the bacula script
76 refers to scripts in the wrong directory. Needed to meet the
77 requirements of recent FHS location changes.
78 kes Fix word alignment problem on non-Intel 64 bit machines
79 such as Solaris. This should fix bug #1097 -- bus error in SD.
81 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
85 kes Update version to reflect the magnitude of the SD changes.
87 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
90 kes Add create_postgresql_database.sql to Win32 installer. Should
91 fix problem reported by Juilio Monteiro.
92 kes Get correct slot when auto unloading a device. This fixes bug
95 kes Fix multiple media restore.
96 kes Make DEVICE Slot private and access it via a method.
97 Allows better control over when it is set and cleared.
98 kes Fix possible seg fault if SQL error.
100 kes Add debug code to SD.
101 kes Fix renaming a Volume, which used the wrong Volume name.
103 kes If operator has rewind tape, print warning, release tape and
104 try once more. If tape is positioned somewhere, something went
105 wrong, so mark the tape in error and try once more. Previously
106 this error was fatal, now it produces an error message.
107 kes Ensure correct volume name displayed during restore
108 kes Ensure that Volume is mounted for restore.
110 kes Fix a few more Coverity reported problems.
112 Beta Release Version 2.2.10-b4
114 kes Enhance a couple of SD debug messages.
115 kes Tweak unload flag setting and ensure it is set during swap.
117 ebl Fix #1091 about bad output in estimate command.
119 kes Modify autochanger locking to attempt to avoid race
121 kes Make sure device not busy before doing label command.
122 kes Display open() errors except when polling. Previously too
123 many were suppressed. This should fix bug #1070.
124 kes Fix Win32 reparse points. Bacula will not recurse into any
125 reparse point directory, including mount points, unless the
126 directory is explicitly mentioned at the top level (same as
127 with Unix). A file that is linked to another file will be
128 backed up -- much as Unix does for hardlinked files.
129 This fixes bug #1041.
131 kes Remove double quotes from ChangeLog and ReleaseNotes
132 kes Remove StorageId test when pruning and recycling (Eric's changes).
133 kes Remove old form of locking when getting volumes -- causes deadlock.
135 kes Fix buffer overruns detected by Coverity.
137 Beta Release Version 2.2.10-b3
139 kes Tweak joblog display.
141 kes Implement --without-qwt
142 kes Fix layout of restore tree dialog
143 kes Add configure bat QWT libraries, so that bat can be built
144 with or without the QWT libaries.
146 kes Apply batfix bat cleanup patch from Riccardo.
147 kes Make sure we unload the right slot when swapping.
149 kes Improve SD reserve debug code.
150 kes Testing an improvement to free up volumes no longer in use.
152 Beta Release Version 2.2.10-b2
155 kes Rework SD acquire for read to handle autochanger Volume
157 kes Implement regression that explicitly tests swapping a Volume
158 from one drive to another.
159 kes Enhance disk-changer to detect most error conditions.
160 kes Fix SD code so that it properly swaps a Volume between drives.
161 This fixes bug #1083.
163 kes Prevent a Volume that is being swapped from being freed from
164 the volume list. This will most likely fix, at least partially,
166 kes Fix strippath so that it does not get a buffer overrun and crash FD.
167 This fixes bug #1078.
168 kes Make inability to change owner/group when creating a dir only a
169 warning rather than an error.
171 ebl Fix SQL query in migration code
173 kes Force unload of volume when wrong volume mounted in SD.
175 kes Fix bat seg fault at termination.
176 kes Add Bacula generated version to bat about box.
178 Beta Release Version 2.2.10-b1
180 kes Permit multiple simultaneous restores -- experiment.
182 kes Backport development stream SD reservation system changes.
185 kes Move final volume swapping code to DCR method and
186 call it from acquire_for_read().
187 kes When wrong volume is mounted during read, unload_autochanger.
189 kes Stop searching for Volumes in SD askdir if DIR returns the
190 same volume name twice in a row.
192 kes Tweak the swap Volume from one drive to another code so that
193 it now seems to work.
194 kes Resolve several problems with recycling that broke the new
195 code (these problems are in 2.2.9 as well).
196 kes Remove the volume lock when calling the sysop code.
197 kes Don't mark a reserved volume with no writers as unused otherwise
200 kes Rework class structures for VOLRES, DCR, and DEVICE to make
201 the method names a bit more logical, and for more logically
202 handling the responsibilities.
204 kes Remove redundant code in terminating the scheduler that just
205 causes a seg fault in many cases.
206 kes Cleanup releasing a volume and make it a DCR method.
207 kes Improve algorithm for detecting pre-reserved volume and
210 kes Tweak volume swapping code so it works.
211 kes Correct name overloading in mount.c
212 kes Replace released flag in VOLRES with reserved and add access
213 methods for the VOLRES class.
214 kes Prevent volume from being released while being swapped.
215 kes Refactor parts of stored/mount.c
217 ebl Add sanity checks for VolWriteTime and VolReadTime
218 ebl Take care of bad clock changes while computing VolWriteTime
219 and VolReadTime. This should fix or limit #1066
220 kes Correct error string numbers in dird/catreq.c
221 kes Restructure reserving, acquiring, and mounting volumes. Calls to
222 autochanger are deferred for mount.c -- simplifes the code.
224 kes Do not prune any running job. It just fails the job.
225 kes Lock the volumes when changing dev->reserved_device and marking
226 the volume unused otherwise the device can get reserved by
227 another job before the volume is released, thus blocking it.
230 Beta Release Version 2.2.9-b7
232 kes Close bat console windows first to eliminate error message
234 kes Remove useless code in Scheduler that causes seg fault on
236 kes Correct some SD catalog request error messages.
237 kes Don't allow pruning of any running job.
238 kes Turn off code in read_record that causes a seg fault in the SD
239 when reading past an EOS_LABEL.
240 kes Turn off unloading the autochanger in reserve.c as it just
242 kes Lock volumes when unreserving a device.
243 kes Do not mark volume unused when recycling.
244 kes When acquiring, don't mark volume unused if it is reserved (busy).
246 Beta Release Version 2.2.9-b6
248 kes Eliminate ./configure warning on po directory
249 kes Fix bug #1063, reuse of freed ptr in list nextvol.
250 kes Release regex compile buffer in filed/job.c
251 kes Add proper type of const char in sql_create.c
252 kes Turn off debug in daemon termination routines
253 kes Move free_volume_list() before devices are freed in stored.c
254 kes Fix reference to uninitalized stack variables in bregex.c.
255 This should correct bug #1067.
257 kes Fix possible seg fault in SD when freeing a volume entry.
259 kes Apply patch from bug #1069 that corrects spurious error messages
260 when ACLs enabled on SGI but no ACL exists.
261 ebl Fix a storage deamon segfault at debug level 500.
263 Beta Release Version 2.2.9-b5 -- not released
265 Beta Release Version 2.2.9-b4
267 kes Re-enable code to remember last volume mounted on a non-tape
269 kes Add patch supplied in bug #1068 that fixes a SD crash when using
270 a Virtual autochanger.
271 kes Generate correct JobMedia records during spooling/despooling when
272 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
273 <tih@hamartun.priv.no> for excellent analysis and testing.
275 Beta release Version 2.2.9-b3
277 kes Rework certain SD locking based on gdb tracebacks of deadlocks
278 sent by Eric. This code now uses only the volume_lock() rather
279 than the reservations lock when at EOM and acquiring a new
281 kes Ensure only one exit point in several subroutines.
283 Beta release version 2.2.9-b2
285 kes Fix to initial tape drive open to release the volume name
287 Beta release Version 2.2.9-b1
289 kes Fix to JobMedia fix.
290 kes Fix bug pointed out by Peter Much that causes the StorageId to
291 be updated when reading a tape (during migration, it could have
292 been incorrectly set to the write StorageId).
294 kes Implement autostart scripts for Debian
296 kes Fix mtx-changer.in for broken Debian mt program.
298 kes Massive commit of all fixes and back ports to create 2.2.9
300 kes Apply doc fix from bug #1062.
301 kes Resolve crash and improper restore wx-console Win32 restore
302 GUI. Fixes bug #1065.
303 kes Update Win32 wxWidgets to latest version.
304 kes Attempt to do correct handling of Win32 mount points. Should
306 kes Fix Win32 FD backup/restore memory leak due to improper termination
307 of BackupRead/Write. This fixes bug# 1038.
308 kes Add const to AIX prototype for initgroups()
310 kes Undo bug #1047 heap overrun fix as it is not correct.
312 kes Fix creating first JobMedia record during Migration to include
313 proper index. This caused slow restores of migrated jobs.
315 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
316 and do not strip paths on symbolic links.
317 kes Set catalog backup database and user name from values specified on
318 the ./configure line.
319 ebl Apply patch to correct bug #1031, about wrong pool source information
322 Release Version 2.2.8
324 kes Apply patch from Martin to correct bug #1040, bscan sets existing
326 kes Fixed important spelling error in doc -- bug #1045.
328 kes Move initialization of read/write res lock earlier in the code.
329 This fixes the crash with a null conf file. This fixes bug
331 kes Redefine CURES in lib/parse_conf to be URES and move it all
332 into lib/parse_conf.c -- this responds to bug #1042, but does
333 not fix it. The fix is not to compile with FORTIFY_SOURCE.
334 kes Backport fix de-referencing a NULL pointer in the scanner from
335 the trunk SVN. I don't think this was reported as a bug.
337 Beta release Version 2.2.8
339 kes Re-enable the new job code editing (%f).
341 kes Fix bsnprintf for float point numbers. I broke recently when
342 parameterizing some variables. This fixes bug #1036.
344 kes Move Heartbeat documentation from Job to Director resource.
345 This fixes bug #1033.
347 kes Fix existing switch drive SD code to call autochanger to release
348 any old volume. This must be done to keep the autochanger from
349 releasing subsequently newly reserved volumes in doing a close().
350 This should possibly fix bugs #1032 and #1018.
351 kes Apply big backport of current SVN SD code that corrects a number
352 of race conditions. This is a first step in fixing bug #1018.
354 ebl Fixes bug #1028 where "Selection Type" option was not usable
358 Release Version 2.2.7
360 kes Partial back out (disabled) %f job code editing because it
361 does not build on Win32.
362 kes Fix seg fault Frank Sweetser reports in regression testing
363 on his systems. The problem was that the original author of
364 bsnprintf.c did not take into account the side effects of
365 using ++x in the argument to a #define.
367 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
368 that implements double quoting include names in conf files,
369 and also allows piping input by having the first character
370 be a vertical bar (|).
371 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
372 that implement %f in RunScripts to pass the FileSet name.
373 kes Skip leading | when lex input comes from a pipe as suggested
374 by Michael Stapelberg <michael@stapelberg.de>.
376 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
377 Nerijus Baliunas <nerijus@users.sourceforge.net>
379 kes This patch corrects a problem where the maximum concurrent storage
380 jobs counter gets out of sync during restore jobs causing jobs to
381 'wait on max Storage jobs'. This patch fixes bug #1009.
383 kes Add new include to postgresql.c suggested by Marc Cousins so
384 that it compiles correctly with pgre version 8.3. Also fix
385 misuse of %x with pointer (should be %p).
387 kes This patch fixes bcopy so that it produces correct Volumes.
389 kes This patch eliminates spurious output to the console during a VerifyVolume
390 job that contains encrypted data. It fixes bug #1024.
392 kes This patch prevents the 'status dir' command from trying to use a scratch
393 volume and possibly moving it from one pool to another. This patch fixes
396 kes Fix --archivedir addition to configure. Replace it with
397 --with-archivedir in configure.in This fixes the regression
399 kes This patch fixes bug #1012 where the job is canceled because
400 of Max Run Time exceeded when the job has not yet started.
402 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
403 one 'part' to write. Instead of each part being stored on disk,
404 written to DVD, then deleted from disk, all parts are written to disk,
405 and only the last is written and deleted from disk.
407 kes Correct typos in disk-changer.in
409 kes This patch fixes the status command to include the formating string for
410 JS_AttrInserting. It fixes bug #1021.
411 kes This patch should fix the Mac OS X build problem on the latest
412 Darwin, where sys/types.h was not included correctly (apparently
413 due to a change in the Mac headers). The solution was to explicitly
414 ensure that it is defined for the ./configure.
415 This patch also has a rebuild of configure that includes the Debian
416 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
417 kes This patch should ensure that queued messages to the console are
418 displayed as soon as possible. It should fix bug #1007, but has been
419 reported not to work.
421 kes This patch fixes the infinite loop when trying to increase the
422 maximum number of volumes in a Pool during the add command.
423 This patch fixes bug #1008.
425 Release Version 2.2.6
427 kes Get fix for joblist bug in bat from trunk.
429 kes This patch fixes bug #1003 where putting the message output from
430 a Verify job into the catalog results in a recursive loop. The problem
431 seems to show up only with postgresql (to be verified).
433 kes Fix bug #942 where lots of emails where generated when the heartbeat
434 interval was low and Bacula wanted a different tape from the one in
437 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
438 which was updated during a restore (or a reading migration) bug #982
440 ebl Use qmake-qt4 instead of qmake when available (debian system).
442 kes Add a security warning to src/cats/make_catalog_backup.in indicating
443 that passing the password via the command line (arg 3) is insecure.
444 This responds to bug #990 (it doesn't fix it).
445 kes Apply 2.2.5-postgresql-errors.patch
446 kes Remove unneeded File table index on JobId, which is already
447 present as the first index of another multi-index.
449 kes Set default debug_level to zero. This corrects bugs #991 and #993.
450 kes Fix a crash in bat when it cannot connect to the Director for example
451 if the Director is not running.
453 kes Activate Close button on tray-monitor window. This fixes
456 kes Fix spurious warning message printed when creating a volume with
457 a LabelFormat. This fixes bug #976.
459 Release Version 2.2.5
461 kes Add JobId in place of Job name in all the Jmsg() output.
462 kes Correct the APP_DESC for the Win32 storage service (remove an e).
464 kes Add new SD despooling attributes and Dir inserting attributes
465 job status codes. This fixes bug #961.
466 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
468 kes Fix doc issue. This fixes bug #963.
469 kes Fix listing performance problems in bat. Pointed out by
471 ebl Fix replace on restore. This fixes bug #969
472 kes Fix bat code that tests for Win32. This should fix bug #968
473 kes Query 5 list wrong Vol after migration. This fixes bug #960
475 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
476 in back porting from 2.3.x
478 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
479 The details are included in the notes in this file.
481 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
482 messages; it fixes a problem opening the SQLite3 database when multiple
483 simultaneous jobs were running; it fixes a bug with certain versions of
484 MySQL where batch inserts failed because of table name character case
485 (upper/lower) differences.
486 kes Fix race condition that drops final block written to volume.
487 This happens in rare cases with multiple simultaneous jobs
488 when the Volume fills. This fixes bug #964. May be related
489 to bug #935 and possibly #903.
491 kes Fix FD->SD authorization failure, which was due to spurious
492 wakeups from a pthread_cond_timedwait(). Simply check the
493 predicate before continuing. This fixes bug #953
494 dvl Add new configuration item --archivedir
495 dvl Adjust regression tests to use tmp not /tmp. This will allow
496 multiple concurrent runs of the regression tests.
498 kes Eliminate more strerror() and replace with bstrerror().
499 kes Remove BSD getopt and replace with unrestricted IBM version.
500 kes Fix Win32 build for changed calling sequences.
502 kes Fix FD->SD authorization failure, which was due to spurious
503 wakeups from a pthread_cond_timedwait(). Simply check the
504 predicate before continuing. This fixes bug #953.
505 kes Add const char where needed (more to do).
507 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
508 kes Don't overwrite error message in check_tables_version.
510 kes Unlock batch insert tables with same calls used elsewhere.
511 kes Allow starting 59 jobs a second.
512 kes Make SD session key more random.
513 kes Add retry for SQLite opening db if it fails. Probably helps
515 kes Suppress extra error messages during batch insert failure.
517 kes Put some FD auth code on dbglvl rather than fixed.
518 kes Return insert attributes error message in db msg buffer to avoid
519 false error messages. Helps fix bug #966.
520 kes Separate batch init error messages. Probably helps fix bug #966.
521 kes If Dir gets an error during inserting attributes, cancel SD.
522 This reduces unnecessary error messages.
524 ebl Cleanup batch insert code. Probably fixes bug #965.
526 kes Turn off some code when batch insert not enabled.
527 kes Edit FD name in connect error messages.
529 kes Add code to handle tray monitor separated from Win32 FD.
530 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
532 kes Fix ANSI tape labeling. This fixes bug #954.
533 kes Increase the max block size to 4MB fixes bug #957.
534 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
535 is not properly mounted (recognized) during a poll.
536 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
537 Job that has differences reports Verify OK.
538 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
540 Release Version 2.2.4
542 kes Increase size of name string when FD making connection to SD.
545 kes Add waits to multiple exit detection code to try to force pid
546 file to always be deleted.
547 kes Restore good dev.tar.gz to rescue set appropriate binary property.
549 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
550 trying to switch drives by checking for blocking before unblocking.
552 kes Cancel storage daemon in all cases where FD reports error. This
553 should fix virtually all cases of bug #920.
555 kes Fix error message that was clobbered when Dir tells SD it does not
556 have write permission on Volume. This should fix a minor point
557 in bug #942, but not the main problem.
558 kes Add code to cancel job in SD if FD connection fails. This should
560 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
561 kes Fix migration code to get correct Volume name with multiple volumes
562 by skipping |. Fixes bug #936.
563 kes Implement patch supplied by Landon to fix bug #944 where using
564 TLS with bconsole uses 99+% of the CPU.
565 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
567 kes Move patches into patches directory.
569 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
572 ebl Using 'm' in bconsole will show messages like before,
573 and not memory usage.
575 Release Version 2.2.3
576 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
579 kes Fix bug #935, and probably also bug #903 where files were not
580 restored. MediaId was not properly set in JobMedia record after
583 kes Add ./configure search in qwt-qt4 for qwt package
584 kes Apply Martin Simmons patch that should turn off the new API usage
585 when batch insert is turned off allowing building on older
588 Release Version 2.2.2
590 ebl Detect if new PosgreSQL batch insert API is present.
591 kes Correct incorrect mempool call causing Director crash.
592 sb Update spec files for 2.2.1 release
594 Release Version 2.2.1
596 kes Update POTFILES.in
597 kes Cleanup a few underquoted AC_DEFUNs in configure
598 kes Apply patch from Martin Simmons that adds a test for va_copy to
601 kes Fix bug #921 by increasing the number of tries to create a new volume
603 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
604 can be called multiple times. Implement a version for machines
605 without va_copy() that gets a big buffer.
607 kes Integrate more portable zone offset code into bsmtp.c
608 Submitted by Attila Fülöp.
610 kes Fix bad SD->FD return status reported by
611 (James Harper) <james.harper@bendigoit.com.au>
612 ebl Fix a bug in read_close_session which return random status
613 thanks to James Harper
615 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
616 and directory names during restore of single file/directories.
617 kes Add sanity checks to .sql command when string is empty. Hopefully
618 that will resolve Dirks Director crash.
620 kes Apply patch submitted by Martin Simmons that corrects a seg fault
621 in the bsmtp chat subroutine when debug is >= 10.
623 kes Fix Director crash when running bat SQL queries.
624 kes Add David's notes on Item 8: Copy pools.
626 kes Rework projects file to be current and ready for a vote.
627 kes Enhance lex scanner error message.
629 kes Tweak LICENSE file to mention BSD code.
630 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
631 if specified on the ./configure.
632 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
633 This class is intended to allow us to open a second bsock to the
634 Director while in the restore subdialog.
636 kes Fix configure to create bat Makefile before creating dependencies.
637 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
638 kes Add a tooltip to the tray monitor.
639 dvl Set the Director's PID file before dropping privs. This fixes
642 kes Update AUTHORs file
643 kes Increase the default max concurrent jobs to 20 in FD and SD to
644 correspond with the default .conf files.
645 kes Rewrite the Win32 service routines. This eliminates the 3 copies
646 some different, of the same file created by RN when porting the
648 kes Rearrange some of the Win32 directories and the placement of the files
650 kes Set DEVELOPER flag in version.h
652 ========================================================================
653 Release Version 2.2.0
655 kes Apply a second doc patch from Marc.
656 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
657 improves the tips section that discusses how to setup multiple
660 kes Update bat README file.
661 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
662 corrects a typo in the Recycle status check in db_find_next_volume().
663 This will probably fix a number of annoying problems with multiple
665 kes Modify most of dird/msgchan.c to use bsock class calls rather than
666 bnet calls -- no functionality change.
668 kes Modify the Verify output to specify if files are missing on
669 the Volume(s) or disk. Fixes confusion in bug #916.
670 kes When more than one Volume is read in a migration job, the last
671 Volume bytes reported are from the last read volume rather than
672 the last written volume. Fixed. This fixes bug #910.
673 kes Fix display of Recycle flag after update volume=foo recycle=yes.
674 It previously printed New Recyle flag is: no. This fixes bug
677 kes Correct seg fault when switching tape drives during restore.
678 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
679 be used until after 2.2.0 release.
681 kes Remove fnmatch() in SD that permitted wild card specifications.
684 kes Fix %g in filename returned by SQL for browse tree reported by
686 kes Fix configure so that it puts config.out in the cwd rather than
688 kes Attempt to fix the locking problem reported by Eric in bug #906.
689 kes Make berrno class to leave errno unchanged after constructor call.
690 kes Make bnet_server use the heap rather than the stack to allocate
691 its socket fd pointers to avoid a crash at termination. Problem
692 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
694 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
695 and putting it in depkgs-qt along with Qt4.3.
697 kes Rework code in acquire.c that switches drives for reading when
698 the Media Type does not match. This should fix bug #906
700 ebl Fix a director segfault during job setup #907
701 kes Correct seg fault in postgresql when first operation returns no
702 rows. Fixes Dirks File browser problem seg fault with bat.
704 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
705 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
708 kes Implement PopUp YES/NO dialog for bat.
710 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
712 kes Correct RunScript to terminate job in FD on failure.
713 kes Change abort_on_error and AbortJobOnError to fail_on_error
714 and FailJobOnError in RunScripts.
715 kes Minor tweaks of code formating in RunScripts, principally to
716 avoid depassing 80 columns.
718 kes Eliminate one #ifdef Win32 in bsmtp
719 kes Implement grow tool to grow a file for testing very large databases.
720 kes Add big-vol-test to test Bacula seeking with > 5GB.
723 kes Modify find_next_volume() to return all values in Media record.
724 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
728 kes Update Release notes
730 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
731 Warning, in previous beta version, all media get from scratch keep their
734 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
735 This should fix bug #842. Made a note to look at removing the temp
736 files at the end of the install.
737 kes Add ability to mount and unmount a file device providing it is
738 marked as being removable and has the appropriate mount and unmount
739 commands defined in the Device resource. This fixes bug #830.
740 kes When applying a storage override, release all previous storage
741 definitions rather than just prepending the new storage.
742 This should prevent a good deal of confusion.
744 kes Implement ./configure search for qwt libraries.
746 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
747 Win32 FD. This should fix bug #893.
748 kes Remove an unnecessary beep in Win32 init code.
749 kes Update copyright dates in Win32 executable about boxes.
750 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
751 code with a BSD getopt.c and getopt.h.
752 kes Remove sched.h from the Win32 compat directory -- not used.
753 kes Remove the Exit menu item from the Win32 tray monitor. If you really
754 need to shut it down, do it through the services panel or the command
756 kes Remove some inappropriate Bacula FSFE copyrights.
757 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
758 kes Fix regress config non-portable test as pointed out by
759 Florian Heigl <florian.heigl@gmail.com>
760 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
761 as pointed out by Florian Heigl <florian.heigl@gmail.com>
763 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
764 Reported by Frank Sweetser.
768 kes Fix client-only build.
769 kes Integrate client-only fixes for bsys (initgroups) and conio from
770 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
771 kes Make arguments to get_scratch_volume() in same order as other
773 kes Rework the prune_volumes() subroutine so that after purging and
774 no volume found in desired pool, it will check for a scratch
775 volume. This prevents recycling the whole scratch pool.
776 kes Add code to status storage to print boffset_t (largefile support).
778 kes Move qwt (Graphics libarary for Qt4) to depkgs.
779 kes You now need a --with-qwt=<dir> to be able to build bat.
780 kes Update src/win32/cats/bacula_cats.def to include the new
781 db_get_query_dbids() call on Win32.
783 kes Correct a problem when selecting a scratch volume and moving
784 it to another pool that lost some columns.
785 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
786 kes Enhance Autochanger error messages to include Volume and device name.
787 kes Rework prune_volumes() code to take account of InChanger flag,
788 and to handle recycling volumes going to the Scratch pool and
789 current pool because the RecyclePool directive.
790 kes Implement a better and more efficient db_get_query_dbids() to
791 handle creating and passing back a list of DBIds.
795 kes Start work on new more efficient DBId subroutine. First use
796 will be for recycling volume to Scratch inchanger.
797 kes Increase number of JobIds in pruning from 1000 to 10000.
798 This to be replaced by above routine.
799 kes Begin implementation of building Qt4 on Win32.
800 kes Correct typo in fix I added for bad TLS shutdown.
801 kes Pull 2.0.3 patches into patches directory.
802 kes Update Release notes. Include qt-console in line count.
803 kes Update Projects file.
805 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
806 bug in migration code where a job that spanned two volumes
809 kes Implement new BST_DESPOOLING blocked state. Change from locking
810 during despooling in SD to blocking. This means that other threads
811 can work with the device structure, in particular the reservations
812 system while despooling.
814 kes Fix return in reservation message queue that missed clearing
815 the jcr lock (implemented 26Jun07 below).
816 kes Rename a number of dev methods to make locking function names
818 kes Document locking in lock.c. Move lock structures to new file
821 kes Move reservations message lock to lock jcr only this
823 kes Move main SD locking code into lock.c (new file).
824 kes Update Win32 build to include lock.c
828 kes Dirk committed the qwt library code for drawing graphs in bat.
829 kes Tweak install of qwt so that it is integrated with ./configure.
831 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
832 out by Eric (my typo).
833 ebl Fix configure.in to get batch mode enable
834 kes Return correct string from authenticate.cpp in bat when connecting
836 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
837 spurious line drops when using TLS.
838 kes Do not file reparse points when restoring a file that already
841 kes Implement Windows reparse points -- similar to directories, but
842 we do not descend into it. This is a first cut. They seem to
843 be backed up, but restore is not yet tested.
844 kes Remove restore_blocking in tls code when shutting a socket to leave
845 it in blocking mode. Hopefully this will fix the encryption bug
846 reported by Frank Sweetser.
847 kes When opening a file for backup, tell the OS that we are going to
848 read it sequentially -- optimization.
849 kes Change variable names in authenticate_director() to not conflict
850 with member names in bat. Caused great confusion with compiler,
853 kes Queue openssl error messages in case of comm problem.
854 kes Do shutdown() call if socket terminated.
855 kes Remove some duplicated code in tls.c
856 kes Move more of the bsock member variables into private and access
858 kes Add Frank Sweetser's tls-test to the regression suite.
860 kes Add Swedish sv.po file
862 kes Don't print clock skew message in FD if less than 3 seconds diff.
863 kes Add a bit of VSS info to status client.
864 kes Implement a first cut of Vista VSS, using Win2003 code.
868 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
869 loaded tape but uses first drive).
870 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
871 This was indeed a Win32 issue.
873 kes Simplify search of autochanger for in-use Volume.
874 kes Fix exit condition of check for in-use volume. kes Remove
875 inappropriate my_postgresql_free_result() in db_close()
877 kes Fix bad return in FD when encryption signature not found.
878 Probably caused a crash.
879 kes Inhibit missing encryption signature error messages for
880 file types where no signature computed.
881 kes Correct inverted check on autochanger in reservation system.
882 kes Tweak debug code in autochanger reservation.
884 kes Add some additional locking in the cats directory in subroutines
885 that modify packet variables called from batch insert.
886 kes Rework how dcrs are allocated. new_dcr() can now be called
887 with an existing pointer, and it will simply clean it up.
888 This allows the reservation system to test various different
889 devices, and will permit easy device changes.
890 kes A bunch of changes all over to handle new new_dcr() calling
892 kes Work more on the Volume management in the SD. Remember Volumes
893 for tape drives and for autochangers (even virtual disk changers).
894 kes When looking at the Volume list to reserve a drive, handle
895 autochanger names correctly by interating through the changer
896 devices. Also call the Director to see if a Volume is suitable
898 kes Fix some bugs in bscan. Make sure all media records are written.
899 Make sure that valid JobMedia records are written for disk files.
900 Previously they were completely wrong.
901 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
902 that the URLs don't change and so that the developers will all
903 work off the same copy. Rebuild from scrach.
904 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
908 kes Fix seg fault in FD from incorrect digest size.
909 kes Fix argument to non-OpenSSL crypto.c subroutine.
913 kes Remove a few malloc()s from the encryption code.
914 kes Use the class calls to bsock in filed/backup.c and restore.c in
915 place of the old bnet_xxx code.
916 kes Implement code that does an on the fly calculation of the
917 signing digest during restore of encrypted files. It makes
918 a best guess at the algorithm, and if it is not correct, will
919 then revert to the old code which reads the file after it is
921 kes Implement at least one missing crypto stream in stream_to_ascii()
922 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
923 #877 where a reload with bad syntax causes Dir to exit.
925 Cut: 2.1.14 beta (not released)
927 kes Do not free a volume on a tape drive until another volume is
928 mounted and read, or the autochanger unloads the volume.
929 This should help the SD re-use volumes that are already mounted,
930 and should fix bug #886.
931 kes Apply patch from user brettedgar that allows gnome2-console include
932 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
933 kes Apply patch from Lucien Weller that fixes day of week calculation
934 because of DST flag problem. Fixes bug #887.
936 kes Move find_next_appendable_volume() to after acquiring a valid device
937 in reserve.c. This fixes bug #864 -- confirmed by reporter.
939 kes Unable to reproduce bug 872. However added additional testing for
941 kes Bug #874 resolved by documenting SQLite limitations.
942 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
943 kes Bug #881 resolved by removing typo in mtx-changer script.
944 kes Made Frank Sweetser's wiki the official Bacula wiki with his
945 approval. Added a link to the wiki on the web page, and implemented
946 a backup from http://paramount.ind.wpi.edu
948 kes Fix update allfrompool to pass pool name.
950 kes Convert to pure GPL v2 license.
951 kes Fix sscanf problems reported by Peter Buschman that caused
952 a bus error on Solaris.
953 kes Rework (simplify) the select prompt in bat.
954 kes Move get_jobid_from_tid() into lib and create a
956 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
957 should definitely fix the problem of lost error messages in the
959 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
960 kes Eliminate tcpd.h from the project. Enclose the #include from the
961 library with extern C ...
962 kes Add print of signal name when a signal is trapped.
966 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
968 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
969 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
970 makes SQLit3 run 30 times faster, though a bit less safe.
971 kes Implement --with-batch-insert in configure and detection of thread
972 safe libraries. It is on by default, but turned off if no thread
973 safe library (e.g. SQLite 2) is available.
975 kes Fix Bacula PostgreSQL buffer overruns.
976 kes Do better checking for NULL results returned from PostgreSQL;
977 implement retry for failed queries; clear results buffer after
978 failed query. Hopefully this will correct the PostgreSQL failures.
980 kes Implement algorithm to handle only one appendable volume with
981 Prefer Mounted Volumes = no.
982 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
983 returned from a query.
984 kes Make volume lock recursive.
985 kes Implement an additional volume reservation algorithm that
986 starts by considering all reserved volumes then uses the
987 old brute force algorithm of searching the resources to
988 find a suitable device.
989 kes Add new reservations debug code and refine the old code.
990 kes Update the win32/dll/bacula.defs file.
992 kes Tweak reservations algorithm to permit a few more cases, i.e.
993 volume reserved, but on different drive, ...
994 kes Enhance SD status to include Pool and Media Type for drive in a
995 more readable format (a bit longer).
996 kes Fix PostgreSQL double free.
998 kes Minor refactoring of restore decryption code.
999 kes Add code to smartall.c to detect double free of a buffer.
1001 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1002 so that bsmtp will create a correct email address (mailbox only).
1003 kes Modify 'memory' command so that the buffers are listed as 'In use'
1004 to avoid confusion with Orphaned buffers.
1005 kes I reworked the OpenSSL include/lib flags to be handled in
1006 the standard Bacula way, which should fix bug #863 concerning
1007 non-standard OpenSSL libraries.
1009 kes Implement Help Browser window for bat.
1010 kes Fix reload bug that reset StorageId to zero.
1012 kes Fix TLS #ifdefing when TLS turned off.
1013 kes Ensure that when labelling a tape with Slot=0 that InChanger
1015 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1017 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1018 add DISTINCT (required by PostgreSQL).
1019 kes Implement BSOCK authenticate_director() method. Eventually will
1020 authenicate all daemons.
1021 kes Move several more functions into the BSOCK class.
1023 kes Add code to tell the OS that we no longer need a cached
1024 file that we were reading. In findlib/bfile.c. Also,
1025 only cache files that we are reading. Thanks to
1026 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1027 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1028 kes Implement script to automatically generate cats and dll .def
1029 files for Win32 dll.
1030 kes Update README.mingw32 to include new .def file generation.
1031 kes Correct typo in UTF-8 error message as reported by:
1032 jhernandez <julianhernandez@gmail.com>
1033 kes Add additional sm_check() code on debug level 1.
1034 kes Set default debug level to 1.
1035 kes Trap SIGABRT in attempt to get traceback.
1037 kes Reduce bat connect timeout from 30 to 15 seconds.
1038 kes More restructuring and implementing BSOCK class in place of
1040 kes Remove a few unnecessary malloc() tests in crypto code.
1041 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1042 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1043 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1045 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1047 kes Fix Verify InitCatalog. The attributes were not pointing to the
1048 correct saved location.
1049 kes Implement message callback so that GUI is sure to get all
1050 daemon messages. Currently displayed in a dialog in bat.
1051 kes Ignore SIGUSR2 (Bacula timer) in bat.
1052 kes Apply regress patch from bug #859 to allow regress to work
1053 with Solaris compiler.
1055 kes Begin adding TLS support to bat.
1056 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1057 clean up lex.c and make it more readable.
1059 kes Move more bnet functions into the BSOCK class.
1060 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1061 kes Complete change of berrno strerror() method to bstrerror()
1063 Release: 2.1.10 beta
1065 kes Cleanup incorrect email addresses in bsmtp.
1066 kes Make bat display initial messages rather than discard them.
1068 kes First cut of adding .mod to the run command.
1069 kes Implement auto display of messages in bat.
1070 kes Enhanced preferences to allow all Bacula output to be
1073 kes Try to make bsmtp date routines more generic.
1074 kes Fixed bug #856 autochanger documentation.
1075 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1076 kes Add new cats entry point so Win32 builds.
1078 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1080 kes Do better checking for the MySQL 64 bit libraries looking for both
1081 .a and .so libraries.
1082 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1083 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1084 kes Require the thread safe version of MySQL during configure. Thanks
1085 to Andre Noll for pointing this out.
1086 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1087 continuing in migration code.
1088 kes Apply implementation of tray-monitor font derived from gnome-console
1089 submitted by Andreas Piesk <a.piesk@gmx.net>
1091 kes Eliminate important memory loss in SQLite
1092 kes Fixed the batch insert MySQL thread specific data that was not
1093 being freed. See cats/mysql.c:db_thread_cleanup().
1094 kes Fix restore before command.
1095 kes Convert old hdr.name to name() in a few places.
1096 kes Implement update jobid command.
1097 kes Return all time_t dates in db_get_job_record()
1098 kes Stop watchdog in SD earlier.
1099 kes Put Pool just after Storage in please mount message.
1100 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1103 kes Update the po files.
1104 kes Fix Verify InitCatalog by making it cache attributes.
1106 kes Change name bacula-bat to bat for man 1 page to correspond to
1108 kes Check for client and store NULL pointers in status command. This
1110 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1111 kes Fix sign extended editing of %p.
1112 kes Clean out a little old #ifdefing in cats/mysql.c
1114 kes If time diff between DIR and FD is more than 600 seconds convert
1115 INFO message to WARNING.
1116 kes Implement heap size display in status for all daemons.
1117 kes Attempt to fix MySQL db open memory loss (not successfull).
1118 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1119 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1120 Query. This looks like a MySQL but but by doing extra releases,
1121 the memory goes away. This should fix bug #847.
1123 kes When backup fails, cancel SD before waiting for sd termination.
1124 kes If SD is waiting for FD to connect during cancel, wake up the
1126 kes Fix fsf code so that errno is correctly reported.
1127 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1129 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1130 so that Bacula doesn't later stumble into a seg fault.
1131 kes Use the term Restore Client in the restore Job report.
1132 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1133 the original job's FileSetId.
1134 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1135 spooling in migration jobs. Not yet tested.
1136 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1137 reading conf file from a pipe. However, do it with open_bpipe()
1138 rather than popen. Not yet tested.
1140 kes Fix an ugly bug where the VolCatBytes were getting updated
1142 kes Implement bconsole memory command that prints current memory
1143 usage, plus smartalloc dump.
1144 kes Clarify some error messages in backup, admin, and migrate.
1145 kes Shrink label dialog to smaller size.
1146 kes Invert Cancel OK buttons on restore to be OK Cancel.
1147 kes More strerror() to bstrerror() conversions.
1149 kes Start implementing bstrerror() in place of strerror().
1150 kes Stripping path -- seems to work.
1152 kes Prevent door and port files from being restored (mostly
1154 kes Free an unreleased buffer in compat code.
1155 kes Change console Job name from *Console* to -Console- to eliminate
1156 Win32 filename problems. Put Win32 path separator when creating
1157 Console file. This fixes bug #846.
1158 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1160 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1162 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1163 to force Win32 error message.
1165 kes First cut strip path. The data should be passed to the FD,
1166 but nothing is done with it yet.
1167 kes Enhance the digest and signature routines in the crypto
1168 library to accept a JCR and to use it to print error messages
1169 so that they will go in the Job report rather than the daemon's
1171 kes Simplify some of the verify signature code.
1172 kes Simplify a few of the alternative returns in the signature
1175 ebl Use only POSIX regex instead of GNU regex in breg.c for
1176 File relocation. It fix broken freebsd compilation.
1177 kes Convert all other Dir files to use new ua class message
1179 kes Tentative fix for missing digest signature in bug 807.
1180 kes Correct handle problem in new win32_ftruncate routine.
1181 kes Convert ua_purge.c and ua_update.c to use new ua class
1182 message routines for bat.
1184 kes Correct incorrect installation of LICENSE in Win32 installer.
1185 kes Display LICENSE at the beginning of the Win32 install.
1186 kes Attempt to correct the need for the png files to be installed
1188 kes Reapply my bat.conf install script in qt-console. I think I
1189 editted bat.pro instead of bat.pro.in and it was lost.
1190 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1191 the /var/lock/subsys for subsysdir. Also corrects typos in the
1194 kes First cut update job.
1195 kes Correct configure to include qmake of src/qt-console directory.
1197 kes Make restore job yes/mod/no print in one command so GUI works.
1198 kes First cut implementing backup and restore client.
1199 kes Correct editing in Verify output that caused a seg fault.
1201 kes Insure that bat.conf is not overwritten during installation.
1202 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1203 while I was implementing migration in March 2006 !
1205 ebl Cleanup file relocation, using char *RegexWhere instead of
1206 char *where + bool where_use_regexp
1207 kes Update some manpages and add bat manpage.
1208 kes Make a first cut at converting bacula.spec.in for bwx-console
1210 kes Apply patch from John Goerzen to add hostname as fourth argument
1211 to make_catalog_backup script.
1212 kes Fix typos I introduced into bsmtp.c
1213 kes Make pm_strxxx() routines handle input of NULL pointer. This
1214 is to protect from NULL pointers returned from SQL databases.
1215 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1216 kes Add more debug to FIFO code -- fix fifo regression test.
1218 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1219 kes Add thread timer to bnet_connect() to break from OS if wait time
1222 kes Update Win32 build to include new files, new symbols, and
1224 kes Implement socket level heartbeat (tcp_keepidle)
1225 ebl Commit File relocation patch
1226 kes Make bat have 'make install' target.
1227 kes Warn during install if old gnome-console binary found.
1228 kes Warn during install if old wx-console binary found.
1229 kes Add -8 option to bsmtp command line to add content type utf-8.
1230 Fixes bug #809. (Character coding problem in bsmtp).
1231 kes If < is found in target (from, to, cc) then do not enclose the
1232 target in < > in bsmtp. Fixes bug #772 (malformed address).
1233 kes When printing certain items in dbcheck, stop after 300000.
1234 Fixes bug #822. (dbcheck loops).
1235 kes Incorrect status in Dir after waiting for mount with poll set.
1238 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1240 kes Print waiting to reserve a device every 5 mins.
1242 kes Don't call close_part in label.c if tape and relabel.
1243 kes Don't free volume if busy in close() -- should help with
1245 ebl Fix #824 RunScript bug (After script could be execute twice)
1246 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1247 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1248 Add a regression script to test RunScript
1250 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1253 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1254 deprecated. No additional bugs will be fixed, and they will be dropped
1255 in a future release (probably 2.4.0).
1256 kes Change name of wx-console to bwx-console to make it more Bacula
1258 kes Change the name of gnome-console to bgnome-console to make it
1261 kes Some time in March, a Feature Request with patch from Jorj Bauer
1262 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1264 The ability for the director to validate a Client (FD) CN against
1265 an arbitrary set of patterns rather than the hostname, with
1266 A new 'TLS Allowed CN' set of directives which are implemented
1267 in the Client resource. Then pattern matching is used in place
1268 of hostname matching against the Certificate's CN. As an example, we
1269 have certificates which (a) use a local CA, and (b) have a CN of the
1271 kes Add new/changed entry points to Win32 build
1272 kes Create unaccepted-projects for projects that are not accepted.
1273 kes Simplify locking in the reservations system.
1274 kes Add more debug code in reservations.
1275 kes Make sure error condition on reserving a volume is handled correctly.
1276 kes Correct handling of volume_in_use.
1277 kes Correct handling of initializing a device.
1278 kes Move handling of broadcasting releasing a device into release_device().
1279 kes Correct attaching dcr to dev so that it is only done if device
1280 is properly initiated.
1282 kes Locking debug level tweaks in SD.
1283 kes Tweak new Volume code.
1285 kes Add exec external-command [wait-seconds] to bconsole. This
1286 executes the external-command. Note! normally external-command
1287 should be enclosed in double quotes.
1288 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1289 it should normally be off in a production system.
1291 kes Implement die command for SD so that we can force it to dump.
1292 kes Implement SD lock debug code.
1293 kes Implement new algorithm for keeping Volume list in SD. It
1294 is now owned by the device.
1296 kes Implement new code for freeing in use volumes that should
1297 resolve if not all, some of the problems of multiple drive
1298 tape conflicts described in bug 801.
1300 kes Fix gui/bacula-web/images files in svn.
1301 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1303 ebl Fix a bug in batch mode (in string escape)
1304 kes Correct migration prune SQL typo that crept in in a
1305 recent 2.1.x change.
1307 kes Move bnet_despool() into class in bsock.c
1308 kes Modify job report to include director name and Build OS.
1309 kes Move drop root privilege and check_catalog() before fork.
1310 kes Add update database scripts (version 9 to 10) to updatedb directory.
1312 ebl Check size and age of each file after its backup to see if
1313 it has changed during backup, if 'checkfilechanges' is set.
1314 The FD will do an extra check (stat(2)) after
1315 each file backup. mtime, ctime and size are compared with
1316 'before backup' information. If time or size mismatch, an
1317 error message will be generated. You must upgrade FD to use it.
1319 kes Make database name and user configurable
1320 --with-db-name=xxx --with-db-user=xxx
1321 kes Add back database type to message.c for debugging.
1323 kes Implement dir_sql() which issues an SQL query.
1324 kes Modify bat medialist to use dir_sql() and do some minor C++
1325 formatting as well as eliminating a number of pointers, simplifing
1328 kes Fix some of the mtx-changer grep commands for tape label readers.
1329 kes Convert a number of bsendmsg into the appropriate send/warning/error
1330 message class calls.
1331 kes Suppress the using database message in the .sql command.
1332 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1334 kes Add context menu for floating a window.
1335 kes Some minor cleanup and name changes in qt-console
1336 kes Add doing mt setblk 0 in Win32 mtx-changer.
1337 kes Apply Martin's bug fix to move definition of ENODATA for
1339 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1340 sqlite2 and sqlite3.
1342 kes More pruning cleanup.
1343 kes Turn on wait_for_drive by default in mtx-changer.
1344 kes Turn on Batch insert code by default as it now passes regression.
1345 kes Add ./configure --enable-bat to enable building of Bat.
1346 No install yet though.
1348 kes Implement a new .sql command for bat.
1349 kes Implement code to turn off pruning in obtaining the next volume.
1350 Pruning is turned off for the status dir command, but turned on
1351 for SD requests and for the list nextvolume command.
1353 kes Correct Qmsg() that was not updated correctly when committing a
1354 previous change (probably the recent TLS patch).
1356 kes Write new subroutine is_volume_purged() that explicitly checks
1357 if the Volume is purged, and if so marks it as such. This should
1358 resolve problems reported about needing to mount twice to recycle
1360 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1361 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1362 amount of duplicated code.
1363 kes Do volume pruning only for the Media Type desired (reduces pruning time
1364 if multiple Media Types are in the same pool).
1365 kes Implement more detailed info in the Job report for the Bacula version
1367 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1369 ebl Add bbatch tool to bench database and insert mode.
1370 Fix sql quote stuff in batch mode
1371 Fix sql stuff for mysql
1373 kes Correct problems with am/pm scheduling. Fixes bug #808.
1374 kes Implement new prunning code that prunes up to 1000 jobs at
1375 the same time. The same technique can be applied to a number
1376 of other prune/purge subroutines.
1377 kes Add an insanity check when starting a new tape job to ensure
1378 that the tape position has not been changed. If so fail the
1380 kes Fix Win32 build for dlls to add the folllowing:
1381 src/lib/bsock.c -- new file with new entry points
1382 src/lib/dlist.c -- new entry points
1383 src/cats/sql_create.c -- new entry point
1384 src/cats/sql_cmds.c -- new DATA item exported
1386 ebl batch mode cleanup bscan-test is ok now.
1387 kes Implement SD code to check length of disk volume before appending.
1389 kes Correct return status on db_batch... routines.
1390 kes Add call to db_write_batch_file_records() to migration code.
1391 ebl Fix AfterJob timing
1392 kes Move the checking of the database in initializion of the Director
1393 to after we drop privileges. This avoids the need for both root
1394 and bacula access to the DB.
1395 kes Correct a misplaced variable definition in src/filed/backup.c
1396 kes Correct how the new batch insert db_create_attributes_record()
1397 uses the arguments. Caused a seg fault in bscan.
1398 kes Implement lock() and unlock() methods in DEVICE class.
1399 Implement block() and set_block(xx) methods in DEVICE class.
1400 kes Modify bnet_connect() so that it uses time() to check for the
1401 wait time expiring (on some OSes, some system calls may not
1402 return immediately).
1403 kes Modify Verify to obtain the previous JobId when it is actually
1404 running rather than at schedule time (as it was in 1.38.x).
1405 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1407 kes When checking pid in pid file, continue running if the pid is
1408 the same as ours. This occurs on IRIX after a system crash.
1411 kes Extend new GUI API.
1412 kes Make the ua structure a class, and implement send_msg(),
1413 error_msg(), warning_msg(), and info_msg().
1415 kes Apply fix from for building wx-console on the Mac from
1417 kes Implement new select mechanism for GUI programs.
1418 kes Reorganize initialization of stackedWidgets in bat.
1420 kes Add updated nagios plugin supplied by Christian Masopust.
1422 kes More bat implementation.
1423 kes File migrate bug with Pool Occupancy using mediaid instead
1424 of jobids. Fixes bug #795.
1425 kes Fix orphaned buffers in filed backup and verify due to
1426 crypto buffers not freed during errors. Fixes bug #789.
1427 kes Extend new GUI api code to tree commands.
1428 kes Ensure that tree and dot commands check console ACLs.
1429 kes Permit marking directory with trailing slash.
1430 kes Allow 20 console connections (instead of only 10).
1432 kes Add smartctl call to bacula-sd.conf as an example of getting
1435 kes Modify jobq.c to let simultaneous restore jobs run. This may
1436 cause them to fail if they cannot get a drive.
1437 kes Add Client Connect Wait to Storage daemon to permit users to
1438 modify the time the SD waits for a FD connection.
1440 kes Correct virtual changer check which was backwards. This caused
1441 volumes to be unloaded into slots already occupied.
1443 kes Apply Command ACL filter to JobId list in restore command.
1444 kes Correct typeo in var.c patch.
1446 kes Don't let Bacula prune File or Job records for the current Job.
1447 kes Fix variable substitution pad + inc bug reported (with patch)
1450 kes Correct SQLite log table index as reported by Luca Berra.
1452 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1454 kes Begin implementing new comm signals for API.
1455 kes Fix a few places in lib/message.c where the open fd may
1457 kes Continue implementing lib/bsock.c (real class). Make jcr,
1458 who, host, and port private. There are new methods to access
1459 them for non-class use. This required touching a number of files.
1461 kes Add LANG=C to autoconf/randpass so it works with languages other
1462 than English. Fixes bug #788.
1464 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1466 You will not be able to generate Include/Exclude list any more.
1467 It will be fixed soon.
1468 If you want to use this, you can apply
1469 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1471 kes Restore of sockets created false error messages because Bacula
1472 no longer restores sockets, but the code was still trying to
1473 set the attributes on a non-existent file. Reported by a user.
1474 ebl finish RecyclePool feature
1475 Media will takes Pool.RecyclePool
1476 when moving from Scratch to a Pool or when user will do
1477 update volume=xxx frompool
1478 To use it, add RecyclePool = aPool to your Pool resource
1481 RecyclePool = Scratch
1485 kes Expand new BSOCK class adding signal() and new BNET signals.
1486 kes Begin enhancing the dot commands adding a new API function
1487 that returns more information and will make it easier
1488 to interface to the Director from a program.
1490 kes Make DEVICE fd private. Its new name is m_fd, and can be
1491 obtained with dev->fd() outside the class. This is the
1492 first of many DEVICE members to be made private.
1493 kes Implement Michael Renner's idea on having a virtual disk
1494 changer. I made some minor modifications (e.g. I did not
1495 implement the Virtual Changer directive, but simply set
1496 the Changer Command to an empty string.
1498 kes Implement a BSOCK send() method that writes the whole record
1499 in a single write() request rather than in two.
1500 ebl add update volume=xxx recyclepool=yyyy
1501 volume takes recyclepool from pool when using update volume=xxx from pool
1503 kes Fix encryption deblocking bug, which caused some restored files
1504 to be truncated. This fixes bug #763.
1505 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1506 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1508 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1509 ebl Use btime_t instead of uint64_t in media patch.
1511 kes Optimize the use of the database a bit in the Status dir command.
1512 Only open it when needed, ensure that if any previous database
1513 was opened, it is closed.
1515 kes Correct VolCatBytes bug from media patch.
1516 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1517 in the case of orphaned records.
1518 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1519 and File records in 300K chunks to be more efficient. This
1520 idea came from Juan Luis Frances (if I remember right).
1521 kes Apply Eric's scratch patch that moves a purged Volume to
1522 the RecyclePool. Question: how is RecyclePool set? what
1523 happens to the ScratchPool?
1524 kes Apply Eric's media patch that collects read/write media
1525 times as well as byte counts. This patch requires a
1526 simultaneous upgrade of the DIR and SD. Note, there
1527 should be some way to turn off timing. I'm not sure
1528 times are in Bacula units.
1529 kes Apply Eric's batch-insert patch.
1531 kes Update projects list.
1533 kes Implement Include/Exclude file lists in FD as dlists using
1534 the new dlistString class. This permits efficiently having
1535 large include/exclude lists and completes project Item 25.
1536 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1537 console is authorized to cancel the job. This fixes bug
1539 kes Modify SD so that the VolCatJobs medium record is updated
1540 at the beginning of a Job rather than the end. This
1541 fixes bug #775 where exceeding MaxVolJobs caused jobs
1543 kes Added a mutex around getting and setting Volume information
1544 so that multiple simultaneous jobs will single thread.
1546 Switch to using Subversion
1547 kes Remove src/pygtk-console/ from configure
1549 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1550 plus the entrypoints.
1551 kes Apply patch supplied that corrects debug print
1552 in canceling jobs for max run time. Supplied as
1553 part of bug #621, which was previously fixed.
1555 kes Test on job_canceled() and sd_msg_thread_done inside
1556 loop starting the message thread to avoid a race condition.
1558 kes Remove rl_catch_signal from console.c as it conflicted
1559 with the header definition. Fixes bug #765.
1560 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1562 kes Clarify some stored/acquire messages to indicate if the
1563 problem is with read or append.
1565 kes Fix memory leak with storage ids in cats/sql_get.c
1566 kes Terminate watchdog earlier to avoid reference to released
1567 memory -- reported by Jason Austin.
1568 kes Move closing the database from jobq.c to the director daemon
1569 termination routine. This fixes memory leaks for shadow jobs
1570 (i.e. migration jobs).
1571 kes Free up the unique jobid chain items in migrate.c. This fixes
1572 a memory leak problem.
1573 kes Convert some ugly looking for statements to use foreach_alist
1574 in findlib/find.c. This will facilitate converting the structures
1575 to use dlist (for large include/exclude lists).
1576 kes Fix a bug in the btree.c and btree.h routines, then rename them
1577 rblist and add them to be built in src/lib. Include some new
1578 methods written by Rudolf Cejka that make the code more readable
1579 (hides some of the ugly casting).
1580 kes Add set_next() and set_prev() methods which make the code much more
1581 readable. Also add a new dlistString class that facilitates storing
1582 strings in dlists. To be used in the large include/exclude lists.
1583 kes Make some trivial modifications to lib/tree.h that use rblist
1584 rather than dlist for storing the tree links. This was suggested
1585 by Rudolf Cejka. The result of this is that the restore tree now
1586 uses red-black binary trees rather than simple linked lists. This
1587 should give rather dramatic speed improvements for directories
1588 contining large numbers of directories/files (more than 10000).
1590 kes Fix maxruntime bug #621.
1592 ebl Implement the include JobID in spool file name project.
1593 kes Reorder projects file in order determined by Jan 2007 vote.
1594 kes Implement item #12 on project list -- quick release of FD by
1596 kes Fix open of SQLite3 db where user does not have write permission
1597 so that DIR does not crash. Fixes bug #761.
1599 kes Add back missing @ in Win32 Makefile.
1600 kes Change 'Device not configured to autolabel' from INFO
1602 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1603 which should restart an indefinite # of times.
1604 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1605 other DIR specifications.
1607 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1608 Fix path quoting in SQLite scripts.
1609 Fix problems with SHGetFolderPath.
1611 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1613 kes Fix Job restart on error bug that promotes an Inc to a Full
1614 backup. This should fix bug #755.
1615 kes Add qt-console and first cut of code.
1619 kes Fix Bacula->Documentation link on Win32 to point to index.html
1620 instead of bacula.html. Fixed bug #750.
1621 kes Return JobId in db_get_job_record() when JobId==0. This should
1623 kes Do not release source pointers when restarting a failed job.
1625 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1626 This *should* fix bug #747.
1627 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1630 kes Modify USTORE constructor to set an empty store_source string,
1631 and don't copy the store_source string in a cancel. Hopefully
1632 this will fix Arno's seg fault, bug #744.
1633 kes Add back code to disable conio in configure. Fixes bug #743.
1634 kes Correct the Options scanner in the FD to correctly handle
1635 SHA1 option, which was eating the next option. Reported by
1637 kes Add code to indicate when the SD is spooling, spool wait, and
1638 despooling as requested by Alan Brown.
1640 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob