1 Technical notes on version 2.4
6 kes Do find_a_volume() each time an unload is done. This
7 fixes the failure of maxvol2-test.
9 Release Beta version 2.4.1-b2
11 kes Use Qmsg() in job.c watchdog callback.
13 kes Release main control rwlock if ABORTing.
14 kes Make watchdog connect timeout queue messages rather than sending
15 directly to avoid lock conflicts with the real thread.
16 kes Remove const char that causes problems with Python, which has
17 older 'incorrect' headers.
18 kes Add const char in dbd.c to avoid compiler warnings.
20 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
21 mt. This fixes bug #1116.
22 kes Fix failure of 2drive-concurrent-test. Always read label;
23 clear_unload() only after drive is defined in acquire_for_read().
25 Release Beta version 2.4.1-b1
27 kes Back out bad src/lib/base64.c change.
29 kes Generally clean up the manual tape loading code. The main
30 conceptial change is that when a volume is marked to be unloaded,
31 its volume name is retained, and it is only marked as unloaded
32 when either the autoloader says it is unloaded or another tape
33 is read on that drive.
35 kes Fix a recycling problem with two autochangers reported in bug
36 #1106. This may also (unlikely) fix a second recycling bug as
38 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
40 kes Fix format problem in bscan output reported in bug #1105.
42 kes Copy more data when restarting a job so that run
43 overrides are kept. This should fix bug #1094.
44 kes Backport updates to jobq.c where possible.
46 kes Fix bug where SD did not ask operator if the device could not
47 be opened. Reported by Eric.
49 kes Add dbuser to DIR conf file (replaces user).
50 kes Add --with-db-password to ./configure
51 kes Fix regress to handle db_password.
52 kes Fix a couple of pedantic compiler warnings.
53 ebl Fix bug when starting a restore on a storage that doesn't
54 have the requested MediaType.
56 kes More work on word alignments -- eliminate all ints from
57 the configuration routines.
59 kes Fix bug reported by Scott Barninger where the bacula script
60 refers to scripts in the wrong directory. Needed to meet the
61 requirements of recent FHS location changes.
62 kes Fix word alignment problem on non-Intel 64 bit machines
63 such as Solaris. This should fix bug #1097 -- bus error in SD.
65 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
69 kes Update version to reflect the magnitude of the SD changes.
71 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
74 kes Add create_postgresql_database.sql to Win32 installer. Should
75 fix problem reported by Juilio Monteiro.
76 kes Get correct slot when auto unloading a device. This fixes bug
79 kes Fix multiple media restore.
80 kes Make DEVICE Slot private and access it via a method.
81 Allows better control over when it is set and cleared.
82 kes Fix possible seg fault if SQL error.
84 kes Add debug code to SD.
85 kes Fix renaming a Volume, which used the wrong Volume name.
87 kes If operator has rewind tape, print warning, release tape and
88 try once more. If tape is positioned somewhere, something went
89 wrong, so mark the tape in error and try once more. Previously
90 this error was fatal, now it produces an error message.
91 kes Ensure correct volume name displayed during restore
92 kes Ensure that Volume is mounted for restore.
94 kes Fix a few more Coverity reported problems.
96 Beta Release Version 2.2.10-b4
98 kes Enhance a couple of SD debug messages.
99 kes Tweak unload flag setting and ensure it is set during swap.
101 ebl Fix #1091 about bad output in estimate command.
103 kes Modify autochanger locking to attempt to avoid race
105 kes Make sure device not busy before doing label command.
106 kes Display open() errors except when polling. Previously too
107 many were suppressed. This should fix bug #1070.
108 kes Fix Win32 reparse points. Bacula will not recurse into any
109 reparse point directory, including mount points, unless the
110 directory is explicitly mentioned at the top level (same as
111 with Unix). A file that is linked to another file will be
112 backed up -- much as Unix does for hardlinked files.
113 This fixes bug #1041.
115 kes Remove double quotes from ChangeLog and ReleaseNotes
116 kes Remove StorageId test when pruning and recycling (Eric's changes).
117 kes Remove old form of locking when getting volumes -- causes deadlock.
119 kes Fix buffer overruns detected by Coverity.
121 Beta Release Version 2.2.10-b3
123 kes Tweak joblog display.
125 kes Implement --without-qwt
126 kes Fix layout of restore tree dialog
127 kes Add configure bat QWT libraries, so that bat can be built
128 with or without the QWT libaries.
130 kes Apply batfix bat cleanup patch from Riccardo.
131 kes Make sure we unload the right slot when swapping.
133 kes Improve SD reserve debug code.
134 kes Testing an improvement to free up volumes no longer in use.
136 Beta Release Version 2.2.10-b2
139 kes Rework SD acquire for read to handle autochanger Volume
141 kes Implement regression that explicitly tests swapping a Volume
142 from one drive to another.
143 kes Enhance disk-changer to detect most error conditions.
144 kes Fix SD code so that it properly swaps a Volume between drives.
145 This fixes bug #1083.
147 kes Prevent a Volume that is being swapped from being freed from
148 the volume list. This will most likely fix, at least partially,
150 kes Fix strippath so that it does not get a buffer overrun and crash FD.
151 This fixes bug #1078.
152 kes Make inability to change owner/group when creating a dir only a
153 warning rather than an error.
155 ebl Fix SQL query in migration code
157 kes Force unload of volume when wrong volume mounted in SD.
159 kes Fix bat seg fault at termination.
160 kes Add Bacula generated version to bat about box.
162 Beta Release Version 2.2.10-b1
164 kes Permit multiple simultaneous restores -- experiment.
166 kes Backport development stream SD reservation system changes.
169 kes Move final volume swapping code to DCR method and
170 call it from acquire_for_read().
171 kes When wrong volume is mounted during read, unload_autochanger.
173 kes Stop searching for Volumes in SD askdir if DIR returns the
174 same volume name twice in a row.
176 kes Tweak the swap Volume from one drive to another code so that
177 it now seems to work.
178 kes Resolve several problems with recycling that broke the new
179 code (these problems are in 2.2.9 as well).
180 kes Remove the volume lock when calling the sysop code.
181 kes Don't mark a reserved volume with no writers as unused otherwise
184 kes Rework class structures for VOLRES, DCR, and DEVICE to make
185 the method names a bit more logical, and for more logically
186 handling the responsibilities.
188 kes Remove redundant code in terminating the scheduler that just
189 causes a seg fault in many cases.
190 kes Cleanup releasing a volume and make it a DCR method.
191 kes Improve algorithm for detecting pre-reserved volume and
194 kes Tweak volume swapping code so it works.
195 kes Correct name overloading in mount.c
196 kes Replace released flag in VOLRES with reserved and add access
197 methods for the VOLRES class.
198 kes Prevent volume from being released while being swapped.
199 kes Refactor parts of stored/mount.c
201 ebl Add sanity checks for VolWriteTime and VolReadTime
202 ebl Take care of bad clock changes while computing VolWriteTime
203 and VolReadTime. This should fix or limit #1066
204 kes Correct error string numbers in dird/catreq.c
205 kes Restructure reserving, acquiring, and mounting volumes. Calls to
206 autochanger are deferred for mount.c -- simplifes the code.
208 kes Do not prune any running job. It just fails the job.
209 kes Lock the volumes when changing dev->reserved_device and marking
210 the volume unused otherwise the device can get reserved by
211 another job before the volume is released, thus blocking it.
214 Beta Release Version 2.2.9-b7
216 kes Close bat console windows first to eliminate error message
218 kes Remove useless code in Scheduler that causes seg fault on
220 kes Correct some SD catalog request error messages.
221 kes Don't allow pruning of any running job.
222 kes Turn off code in read_record that causes a seg fault in the SD
223 when reading past an EOS_LABEL.
224 kes Turn off unloading the autochanger in reserve.c as it just
226 kes Lock volumes when unreserving a device.
227 kes Do not mark volume unused when recycling.
228 kes When acquiring, don't mark volume unused if it is reserved (busy).
230 Beta Release Version 2.2.9-b6
232 kes Eliminate ./configure warning on po directory
233 kes Fix bug #1063, reuse of freed ptr in list nextvol.
234 kes Release regex compile buffer in filed/job.c
235 kes Add proper type of const char in sql_create.c
236 kes Turn off debug in daemon termination routines
237 kes Move free_volume_list() before devices are freed in stored.c
238 kes Fix reference to uninitalized stack variables in bregex.c.
239 This should correct bug #1067.
241 kes Fix possible seg fault in SD when freeing a volume entry.
243 kes Apply patch from bug #1069 that corrects spurious error messages
244 when ACLs enabled on SGI but no ACL exists.
245 ebl Fix a storage deamon segfault at debug level 500.
247 Beta Release Version 2.2.9-b5 -- not released
249 Beta Release Version 2.2.9-b4
251 kes Re-enable code to remember last volume mounted on a non-tape
253 kes Add patch supplied in bug #1068 that fixes a SD crash when using
254 a Virtual autochanger.
255 kes Generate correct JobMedia records during spooling/despooling when
256 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
257 <tih@hamartun.priv.no> for excellent analysis and testing.
259 Beta release Version 2.2.9-b3
261 kes Rework certain SD locking based on gdb tracebacks of deadlocks
262 sent by Eric. This code now uses only the volume_lock() rather
263 than the reservations lock when at EOM and acquiring a new
265 kes Ensure only one exit point in several subroutines.
267 Beta release version 2.2.9-b2
269 kes Fix to initial tape drive open to release the volume name
271 Beta release Version 2.2.9-b1
273 kes Fix to JobMedia fix.
274 kes Fix bug pointed out by Peter Much that causes the StorageId to
275 be updated when reading a tape (during migration, it could have
276 been incorrectly set to the write StorageId).
278 kes Implement autostart scripts for Debian
280 kes Fix mtx-changer.in for broken Debian mt program.
282 kes Massive commit of all fixes and back ports to create 2.2.9
284 kes Apply doc fix from bug #1062.
285 kes Resolve crash and improper restore wx-console Win32 restore
286 GUI. Fixes bug #1065.
287 kes Update Win32 wxWidgets to latest version.
288 kes Attempt to do correct handling of Win32 mount points. Should
290 kes Fix Win32 FD backup/restore memory leak due to improper termination
291 of BackupRead/Write. This fixes bug# 1038.
292 kes Add const to AIX prototype for initgroups()
294 kes Undo bug #1047 heap overrun fix as it is not correct.
296 kes Fix creating first JobMedia record during Migration to include
297 proper index. This caused slow restores of migrated jobs.
299 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
300 and do not strip paths on symbolic links.
301 kes Set catalog backup database and user name from values specified on
302 the ./configure line.
303 ebl Apply patch to correct bug #1031, about wrong pool source information
306 Release Version 2.2.8
308 kes Apply patch from Martin to correct bug #1040, bscan sets existing
310 kes Fixed important spelling error in doc -- bug #1045.
312 kes Move initialization of read/write res lock earlier in the code.
313 This fixes the crash with a null conf file. This fixes bug
315 kes Redefine CURES in lib/parse_conf to be URES and move it all
316 into lib/parse_conf.c -- this responds to bug #1042, but does
317 not fix it. The fix is not to compile with FORTIFY_SOURCE.
318 kes Backport fix de-referencing a NULL pointer in the scanner from
319 the trunk SVN. I don't think this was reported as a bug.
321 Beta release Version 2.2.8
323 kes Re-enable the new job code editing (%f).
325 kes Fix bsnprintf for float point numbers. I broke recently when
326 parameterizing some variables. This fixes bug #1036.
328 kes Move Heartbeat documentation from Job to Director resource.
329 This fixes bug #1033.
331 kes Fix existing switch drive SD code to call autochanger to release
332 any old volume. This must be done to keep the autochanger from
333 releasing subsequently newly reserved volumes in doing a close().
334 This should possibly fix bugs #1032 and #1018.
335 kes Apply big backport of current SVN SD code that corrects a number
336 of race conditions. This is a first step in fixing bug #1018.
338 ebl Fixes bug #1028 where "Selection Type" option was not usable
342 Release Version 2.2.7
344 kes Partial back out (disabled) %f job code editing because it
345 does not build on Win32.
346 kes Fix seg fault Frank Sweetser reports in regression testing
347 on his systems. The problem was that the original author of
348 bsnprintf.c did not take into account the side effects of
349 using ++x in the argument to a #define.
351 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
352 that implements double quoting include names in conf files,
353 and also allows piping input by having the first character
354 be a vertical bar (|).
355 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
356 that implement %f in RunScripts to pass the FileSet name.
357 kes Skip leading | when lex input comes from a pipe as suggested
358 by Michael Stapelberg <michael@stapelberg.de>.
360 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
361 Nerijus Baliunas <nerijus@users.sourceforge.net>
363 kes This patch corrects a problem where the maximum concurrent storage
364 jobs counter gets out of sync during restore jobs causing jobs to
365 'wait on max Storage jobs'. This patch fixes bug #1009.
367 kes Add new include to postgresql.c suggested by Marc Cousins so
368 that it compiles correctly with pgre version 8.3. Also fix
369 misuse of %x with pointer (should be %p).
371 kes This patch fixes bcopy so that it produces correct Volumes.
373 kes This patch eliminates spurious output to the console during a VerifyVolume
374 job that contains encrypted data. It fixes bug #1024.
376 kes This patch prevents the 'status dir' command from trying to use a scratch
377 volume and possibly moving it from one pool to another. This patch fixes
380 kes Fix --archivedir addition to configure. Replace it with
381 --with-archivedir in configure.in This fixes the regression
383 kes This patch fixes bug #1012 where the job is canceled because
384 of Max Run Time exceeded when the job has not yet started.
386 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
387 one 'part' to write. Instead of each part being stored on disk,
388 written to DVD, then deleted from disk, all parts are written to disk,
389 and only the last is written and deleted from disk.
391 kes Correct typos in disk-changer.in
393 kes This patch fixes the status command to include the formating string for
394 JS_AttrInserting. It fixes bug #1021.
395 kes This patch should fix the Mac OS X build problem on the latest
396 Darwin, where sys/types.h was not included correctly (apparently
397 due to a change in the Mac headers). The solution was to explicitly
398 ensure that it is defined for the ./configure.
399 This patch also has a rebuild of configure that includes the Debian
400 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
401 kes This patch should ensure that queued messages to the console are
402 displayed as soon as possible. It should fix bug #1007, but has been
403 reported not to work.
405 kes This patch fixes the infinite loop when trying to increase the
406 maximum number of volumes in a Pool during the add command.
407 This patch fixes bug #1008.
409 Release Version 2.2.6
411 kes Get fix for joblist bug in bat from trunk.
413 kes This patch fixes bug #1003 where putting the message output from
414 a Verify job into the catalog results in a recursive loop. The problem
415 seems to show up only with postgresql (to be verified).
417 kes Fix bug #942 where lots of emails where generated when the heartbeat
418 interval was low and Bacula wanted a different tape from the one in
421 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
422 which was updated during a restore (or a reading migration) bug #982
424 ebl Use qmake-qt4 instead of qmake when available (debian system).
426 kes Add a security warning to src/cats/make_catalog_backup.in indicating
427 that passing the password via the command line (arg 3) is insecure.
428 This responds to bug #990 (it doesn't fix it).
429 kes Apply 2.2.5-postgresql-errors.patch
430 kes Remove unneeded File table index on JobId, which is already
431 present as the first index of another multi-index.
433 kes Set default debug_level to zero. This corrects bugs #991 and #993.
434 kes Fix a crash in bat when it cannot connect to the Director for example
435 if the Director is not running.
437 kes Activate Close button on tray-monitor window. This fixes
440 kes Fix spurious warning message printed when creating a volume with
441 a LabelFormat. This fixes bug #976.
443 Release Version 2.2.5
445 kes Add JobId in place of Job name in all the Jmsg() output.
446 kes Correct the APP_DESC for the Win32 storage service (remove an e).
448 kes Add new SD despooling attributes and Dir inserting attributes
449 job status codes. This fixes bug #961.
450 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
452 kes Fix doc issue. This fixes bug #963.
453 kes Fix listing performance problems in bat. Pointed out by
455 ebl Fix replace on restore. This fixes bug #969
456 kes Fix bat code that tests for Win32. This should fix bug #968
457 kes Query 5 list wrong Vol after migration. This fixes bug #960
459 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
460 in back porting from 2.3.x
462 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
463 The details are included in the notes in this file.
465 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
466 messages; it fixes a problem opening the SQLite3 database when multiple
467 simultaneous jobs were running; it fixes a bug with certain versions of
468 MySQL where batch inserts failed because of table name character case
469 (upper/lower) differences.
470 kes Fix race condition that drops final block written to volume.
471 This happens in rare cases with multiple simultaneous jobs
472 when the Volume fills. This fixes bug #964. May be related
473 to bug #935 and possibly #903.
475 kes Fix FD->SD authorization failure, which was due to spurious
476 wakeups from a pthread_cond_timedwait(). Simply check the
477 predicate before continuing. This fixes bug #953
478 dvl Add new configuration item --archivedir
479 dvl Adjust regression tests to use tmp not /tmp. This will allow
480 multiple concurrent runs of the regression tests.
482 kes Eliminate more strerror() and replace with bstrerror().
483 kes Remove BSD getopt and replace with unrestricted IBM version.
484 kes Fix Win32 build for changed calling sequences.
486 kes Fix FD->SD authorization failure, which was due to spurious
487 wakeups from a pthread_cond_timedwait(). Simply check the
488 predicate before continuing. This fixes bug #953.
489 kes Add const char where needed (more to do).
491 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
492 kes Don't overwrite error message in check_tables_version.
494 kes Unlock batch insert tables with same calls used elsewhere.
495 kes Allow starting 59 jobs a second.
496 kes Make SD session key more random.
497 kes Add retry for SQLite opening db if it fails. Probably helps
499 kes Suppress extra error messages during batch insert failure.
501 kes Put some FD auth code on dbglvl rather than fixed.
502 kes Return insert attributes error message in db msg buffer to avoid
503 false error messages. Helps fix bug #966.
504 kes Separate batch init error messages. Probably helps fix bug #966.
505 kes If Dir gets an error during inserting attributes, cancel SD.
506 This reduces unnecessary error messages.
508 ebl Cleanup batch insert code. Probably fixes bug #965.
510 kes Turn off some code when batch insert not enabled.
511 kes Edit FD name in connect error messages.
513 kes Add code to handle tray monitor separated from Win32 FD.
514 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
516 kes Fix ANSI tape labeling. This fixes bug #954.
517 kes Increase the max block size to 4MB fixes bug #957.
518 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
519 is not properly mounted (recognized) during a poll.
520 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
521 Job that has differences reports Verify OK.
522 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
524 Release Version 2.2.4
526 kes Increase size of name string when FD making connection to SD.
529 kes Add waits to multiple exit detection code to try to force pid
530 file to always be deleted.
531 kes Restore good dev.tar.gz to rescue set appropriate binary property.
533 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
534 trying to switch drives by checking for blocking before unblocking.
536 kes Cancel storage daemon in all cases where FD reports error. This
537 should fix virtually all cases of bug #920.
539 kes Fix error message that was clobbered when Dir tells SD it does not
540 have write permission on Volume. This should fix a minor point
541 in bug #942, but not the main problem.
542 kes Add code to cancel job in SD if FD connection fails. This should
544 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
545 kes Fix migration code to get correct Volume name with multiple volumes
546 by skipping |. Fixes bug #936.
547 kes Implement patch supplied by Landon to fix bug #944 where using
548 TLS with bconsole uses 99+% of the CPU.
549 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
551 kes Move patches into patches directory.
553 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
556 ebl Using 'm' in bconsole will show messages like before,
557 and not memory usage.
559 Release Version 2.2.3
560 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
563 kes Fix bug #935, and probably also bug #903 where files were not
564 restored. MediaId was not properly set in JobMedia record after
567 kes Add ./configure search in qwt-qt4 for qwt package
568 kes Apply Martin Simmons patch that should turn off the new API usage
569 when batch insert is turned off allowing building on older
572 Release Version 2.2.2
574 ebl Detect if new PosgreSQL batch insert API is present.
575 kes Correct incorrect mempool call causing Director crash.
576 sb Update spec files for 2.2.1 release
578 Release Version 2.2.1
580 kes Update POTFILES.in
581 kes Cleanup a few underquoted AC_DEFUNs in configure
582 kes Apply patch from Martin Simmons that adds a test for va_copy to
585 kes Fix bug #921 by increasing the number of tries to create a new volume
587 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
588 can be called multiple times. Implement a version for machines
589 without va_copy() that gets a big buffer.
591 kes Integrate more portable zone offset code into bsmtp.c
592 Submitted by Attila Fülöp.
594 kes Fix bad SD->FD return status reported by
595 (James Harper) <james.harper@bendigoit.com.au>
596 ebl Fix a bug in read_close_session which return random status
597 thanks to James Harper
599 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
600 and directory names during restore of single file/directories.
601 kes Add sanity checks to .sql command when string is empty. Hopefully
602 that will resolve Dirks Director crash.
604 kes Apply patch submitted by Martin Simmons that corrects a seg fault
605 in the bsmtp chat subroutine when debug is >= 10.
607 kes Fix Director crash when running bat SQL queries.
608 kes Add David's notes on Item 8: Copy pools.
610 kes Rework projects file to be current and ready for a vote.
611 kes Enhance lex scanner error message.
613 kes Tweak LICENSE file to mention BSD code.
614 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
615 if specified on the ./configure.
616 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
617 This class is intended to allow us to open a second bsock to the
618 Director while in the restore subdialog.
620 kes Fix configure to create bat Makefile before creating dependencies.
621 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
622 kes Add a tooltip to the tray monitor.
623 dvl Set the Director's PID file before dropping privs. This fixes
626 kes Update AUTHORs file
627 kes Increase the default max concurrent jobs to 20 in FD and SD to
628 correspond with the default .conf files.
629 kes Rewrite the Win32 service routines. This eliminates the 3 copies
630 some different, of the same file created by RN when porting the
632 kes Rearrange some of the Win32 directories and the placement of the files
634 kes Set DEVELOPER flag in version.h
636 ========================================================================
637 Release Version 2.2.0
639 kes Apply a second doc patch from Marc.
640 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
641 improves the tips section that discusses how to setup multiple
644 kes Update bat README file.
645 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
646 corrects a typo in the Recycle status check in db_find_next_volume().
647 This will probably fix a number of annoying problems with multiple
649 kes Modify most of dird/msgchan.c to use bsock class calls rather than
650 bnet calls -- no functionality change.
652 kes Modify the Verify output to specify if files are missing on
653 the Volume(s) or disk. Fixes confusion in bug #916.
654 kes When more than one Volume is read in a migration job, the last
655 Volume bytes reported are from the last read volume rather than
656 the last written volume. Fixed. This fixes bug #910.
657 kes Fix display of Recycle flag after update volume=foo recycle=yes.
658 It previously printed New Recyle flag is: no. This fixes bug
661 kes Correct seg fault when switching tape drives during restore.
662 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
663 be used until after 2.2.0 release.
665 kes Remove fnmatch() in SD that permitted wild card specifications.
668 kes Fix %g in filename returned by SQL for browse tree reported by
670 kes Fix configure so that it puts config.out in the cwd rather than
672 kes Attempt to fix the locking problem reported by Eric in bug #906.
673 kes Make berrno class to leave errno unchanged after constructor call.
674 kes Make bnet_server use the heap rather than the stack to allocate
675 its socket fd pointers to avoid a crash at termination. Problem
676 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
678 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
679 and putting it in depkgs-qt along with Qt4.3.
681 kes Rework code in acquire.c that switches drives for reading when
682 the Media Type does not match. This should fix bug #906
684 ebl Fix a director segfault during job setup #907
685 kes Correct seg fault in postgresql when first operation returns no
686 rows. Fixes Dirks File browser problem seg fault with bat.
688 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
689 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
692 kes Implement PopUp YES/NO dialog for bat.
694 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
696 kes Correct RunScript to terminate job in FD on failure.
697 kes Change abort_on_error and AbortJobOnError to fail_on_error
698 and FailJobOnError in RunScripts.
699 kes Minor tweaks of code formating in RunScripts, principally to
700 avoid depassing 80 columns.
702 kes Eliminate one #ifdef Win32 in bsmtp
703 kes Implement grow tool to grow a file for testing very large databases.
704 kes Add big-vol-test to test Bacula seeking with > 5GB.
707 kes Modify find_next_volume() to return all values in Media record.
708 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
712 kes Update Release notes
714 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
715 Warning, in previous beta version, all media get from scratch keep their
718 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
719 This should fix bug #842. Made a note to look at removing the temp
720 files at the end of the install.
721 kes Add ability to mount and unmount a file device providing it is
722 marked as being removable and has the appropriate mount and unmount
723 commands defined in the Device resource. This fixes bug #830.
724 kes When applying a storage override, release all previous storage
725 definitions rather than just prepending the new storage.
726 This should prevent a good deal of confusion.
728 kes Implement ./configure search for qwt libraries.
730 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
731 Win32 FD. This should fix bug #893.
732 kes Remove an unnecessary beep in Win32 init code.
733 kes Update copyright dates in Win32 executable about boxes.
734 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
735 code with a BSD getopt.c and getopt.h.
736 kes Remove sched.h from the Win32 compat directory -- not used.
737 kes Remove the Exit menu item from the Win32 tray monitor. If you really
738 need to shut it down, do it through the services panel or the command
740 kes Remove some inappropriate Bacula FSFE copyrights.
741 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
742 kes Fix regress config non-portable test as pointed out by
743 Florian Heigl <florian.heigl@gmail.com>
744 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
745 as pointed out by Florian Heigl <florian.heigl@gmail.com>
747 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
748 Reported by Frank Sweetser.
752 kes Fix client-only build.
753 kes Integrate client-only fixes for bsys (initgroups) and conio from
754 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
755 kes Make arguments to get_scratch_volume() in same order as other
757 kes Rework the prune_volumes() subroutine so that after purging and
758 no volume found in desired pool, it will check for a scratch
759 volume. This prevents recycling the whole scratch pool.
760 kes Add code to status storage to print boffset_t (largefile support).
762 kes Move qwt (Graphics libarary for Qt4) to depkgs.
763 kes You now need a --with-qwt=<dir> to be able to build bat.
764 kes Update src/win32/cats/bacula_cats.def to include the new
765 db_get_query_dbids() call on Win32.
767 kes Correct a problem when selecting a scratch volume and moving
768 it to another pool that lost some columns.
769 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
770 kes Enhance Autochanger error messages to include Volume and device name.
771 kes Rework prune_volumes() code to take account of InChanger flag,
772 and to handle recycling volumes going to the Scratch pool and
773 current pool because the RecyclePool directive.
774 kes Implement a better and more efficient db_get_query_dbids() to
775 handle creating and passing back a list of DBIds.
779 kes Start work on new more efficient DBId subroutine. First use
780 will be for recycling volume to Scratch inchanger.
781 kes Increase number of JobIds in pruning from 1000 to 10000.
782 This to be replaced by above routine.
783 kes Begin implementation of building Qt4 on Win32.
784 kes Correct typo in fix I added for bad TLS shutdown.
785 kes Pull 2.0.3 patches into patches directory.
786 kes Update Release notes. Include qt-console in line count.
787 kes Update Projects file.
789 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
790 bug in migration code where a job that spanned two volumes
793 kes Implement new BST_DESPOOLING blocked state. Change from locking
794 during despooling in SD to blocking. This means that other threads
795 can work with the device structure, in particular the reservations
796 system while despooling.
798 kes Fix return in reservation message queue that missed clearing
799 the jcr lock (implemented 26Jun07 below).
800 kes Rename a number of dev methods to make locking function names
802 kes Document locking in lock.c. Move lock structures to new file
805 kes Move reservations message lock to lock jcr only this
807 kes Move main SD locking code into lock.c (new file).
808 kes Update Win32 build to include lock.c
812 kes Dirk committed the qwt library code for drawing graphs in bat.
813 kes Tweak install of qwt so that it is integrated with ./configure.
815 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
816 out by Eric (my typo).
817 ebl Fix configure.in to get batch mode enable
818 kes Return correct string from authenticate.cpp in bat when connecting
820 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
821 spurious line drops when using TLS.
822 kes Do not file reparse points when restoring a file that already
825 kes Implement Windows reparse points -- similar to directories, but
826 we do not descend into it. This is a first cut. They seem to
827 be backed up, but restore is not yet tested.
828 kes Remove restore_blocking in tls code when shutting a socket to leave
829 it in blocking mode. Hopefully this will fix the encryption bug
830 reported by Frank Sweetser.
831 kes When opening a file for backup, tell the OS that we are going to
832 read it sequentially -- optimization.
833 kes Change variable names in authenticate_director() to not conflict
834 with member names in bat. Caused great confusion with compiler,
837 kes Queue openssl error messages in case of comm problem.
838 kes Do shutdown() call if socket terminated.
839 kes Remove some duplicated code in tls.c
840 kes Move more of the bsock member variables into private and access
842 kes Add Frank Sweetser's tls-test to the regression suite.
844 kes Add Swedish sv.po file
846 kes Don't print clock skew message in FD if less than 3 seconds diff.
847 kes Add a bit of VSS info to status client.
848 kes Implement a first cut of Vista VSS, using Win2003 code.
852 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
853 loaded tape but uses first drive).
854 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
855 This was indeed a Win32 issue.
857 kes Simplify search of autochanger for in-use Volume.
858 kes Fix exit condition of check for in-use volume. kes Remove
859 inappropriate my_postgresql_free_result() in db_close()
861 kes Fix bad return in FD when encryption signature not found.
862 Probably caused a crash.
863 kes Inhibit missing encryption signature error messages for
864 file types where no signature computed.
865 kes Correct inverted check on autochanger in reservation system.
866 kes Tweak debug code in autochanger reservation.
868 kes Add some additional locking in the cats directory in subroutines
869 that modify packet variables called from batch insert.
870 kes Rework how dcrs are allocated. new_dcr() can now be called
871 with an existing pointer, and it will simply clean it up.
872 This allows the reservation system to test various different
873 devices, and will permit easy device changes.
874 kes A bunch of changes all over to handle new new_dcr() calling
876 kes Work more on the Volume management in the SD. Remember Volumes
877 for tape drives and for autochangers (even virtual disk changers).
878 kes When looking at the Volume list to reserve a drive, handle
879 autochanger names correctly by interating through the changer
880 devices. Also call the Director to see if a Volume is suitable
882 kes Fix some bugs in bscan. Make sure all media records are written.
883 Make sure that valid JobMedia records are written for disk files.
884 Previously they were completely wrong.
885 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
886 that the URLs don't change and so that the developers will all
887 work off the same copy. Rebuild from scrach.
888 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
892 kes Fix seg fault in FD from incorrect digest size.
893 kes Fix argument to non-OpenSSL crypto.c subroutine.
897 kes Remove a few malloc()s from the encryption code.
898 kes Use the class calls to bsock in filed/backup.c and restore.c in
899 place of the old bnet_xxx code.
900 kes Implement code that does an on the fly calculation of the
901 signing digest during restore of encrypted files. It makes
902 a best guess at the algorithm, and if it is not correct, will
903 then revert to the old code which reads the file after it is
905 kes Implement at least one missing crypto stream in stream_to_ascii()
906 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
907 #877 where a reload with bad syntax causes Dir to exit.
909 Cut: 2.1.14 beta (not released)
911 kes Do not free a volume on a tape drive until another volume is
912 mounted and read, or the autochanger unloads the volume.
913 This should help the SD re-use volumes that are already mounted,
914 and should fix bug #886.
915 kes Apply patch from user brettedgar that allows gnome2-console include
916 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
917 kes Apply patch from Lucien Weller that fixes day of week calculation
918 because of DST flag problem. Fixes bug #887.
920 kes Move find_next_appendable_volume() to after acquiring a valid device
921 in reserve.c. This fixes bug #864 -- confirmed by reporter.
923 kes Unable to reproduce bug 872. However added additional testing for
925 kes Bug #874 resolved by documenting SQLite limitations.
926 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
927 kes Bug #881 resolved by removing typo in mtx-changer script.
928 kes Made Frank Sweetser's wiki the official Bacula wiki with his
929 approval. Added a link to the wiki on the web page, and implemented
930 a backup from http://paramount.ind.wpi.edu
932 kes Fix update allfrompool to pass pool name.
934 kes Convert to pure GPL v2 license.
935 kes Fix sscanf problems reported by Peter Buschman that caused
936 a bus error on Solaris.
937 kes Rework (simplify) the select prompt in bat.
938 kes Move get_jobid_from_tid() into lib and create a
940 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
941 should definitely fix the problem of lost error messages in the
943 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
944 kes Eliminate tcpd.h from the project. Enclose the #include from the
945 library with extern C ...
946 kes Add print of signal name when a signal is trapped.
950 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
952 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
953 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
954 makes SQLit3 run 30 times faster, though a bit less safe.
955 kes Implement --with-batch-insert in configure and detection of thread
956 safe libraries. It is on by default, but turned off if no thread
957 safe library (e.g. SQLite 2) is available.
959 kes Fix Bacula PostgreSQL buffer overruns.
960 kes Do better checking for NULL results returned from PostgreSQL;
961 implement retry for failed queries; clear results buffer after
962 failed query. Hopefully this will correct the PostgreSQL failures.
964 kes Implement algorithm to handle only one appendable volume with
965 Prefer Mounted Volumes = no.
966 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
967 returned from a query.
968 kes Make volume lock recursive.
969 kes Implement an additional volume reservation algorithm that
970 starts by considering all reserved volumes then uses the
971 old brute force algorithm of searching the resources to
972 find a suitable device.
973 kes Add new reservations debug code and refine the old code.
974 kes Update the win32/dll/bacula.defs file.
976 kes Tweak reservations algorithm to permit a few more cases, i.e.
977 volume reserved, but on different drive, ...
978 kes Enhance SD status to include Pool and Media Type for drive in a
979 more readable format (a bit longer).
980 kes Fix PostgreSQL double free.
982 kes Minor refactoring of restore decryption code.
983 kes Add code to smartall.c to detect double free of a buffer.
985 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
986 so that bsmtp will create a correct email address (mailbox only).
987 kes Modify 'memory' command so that the buffers are listed as 'In use'
988 to avoid confusion with Orphaned buffers.
989 kes I reworked the OpenSSL include/lib flags to be handled in
990 the standard Bacula way, which should fix bug #863 concerning
991 non-standard OpenSSL libraries.
993 kes Implement Help Browser window for bat.
994 kes Fix reload bug that reset StorageId to zero.
996 kes Fix TLS #ifdefing when TLS turned off.
997 kes Ensure that when labelling a tape with Slot=0 that InChanger
999 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1001 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1002 add DISTINCT (required by PostgreSQL).
1003 kes Implement BSOCK authenticate_director() method. Eventually will
1004 authenicate all daemons.
1005 kes Move several more functions into the BSOCK class.
1007 kes Add code to tell the OS that we no longer need a cached
1008 file that we were reading. In findlib/bfile.c. Also,
1009 only cache files that we are reading. Thanks to
1010 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1011 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1012 kes Implement script to automatically generate cats and dll .def
1013 files for Win32 dll.
1014 kes Update README.mingw32 to include new .def file generation.
1015 kes Correct typo in UTF-8 error message as reported by:
1016 jhernandez <julianhernandez@gmail.com>
1017 kes Add additional sm_check() code on debug level 1.
1018 kes Set default debug level to 1.
1019 kes Trap SIGABRT in attempt to get traceback.
1021 kes Reduce bat connect timeout from 30 to 15 seconds.
1022 kes More restructuring and implementing BSOCK class in place of
1024 kes Remove a few unnecessary malloc() tests in crypto code.
1025 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1026 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1027 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1029 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1031 kes Fix Verify InitCatalog. The attributes were not pointing to the
1032 correct saved location.
1033 kes Implement message callback so that GUI is sure to get all
1034 daemon messages. Currently displayed in a dialog in bat.
1035 kes Ignore SIGUSR2 (Bacula timer) in bat.
1036 kes Apply regress patch from bug #859 to allow regress to work
1037 with Solaris compiler.
1039 kes Begin adding TLS support to bat.
1040 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1041 clean up lex.c and make it more readable.
1043 kes Move more bnet functions into the BSOCK class.
1044 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1045 kes Complete change of berrno strerror() method to bstrerror()
1047 Release: 2.1.10 beta
1049 kes Cleanup incorrect email addresses in bsmtp.
1050 kes Make bat display initial messages rather than discard them.
1052 kes First cut of adding .mod to the run command.
1053 kes Implement auto display of messages in bat.
1054 kes Enhanced preferences to allow all Bacula output to be
1057 kes Try to make bsmtp date routines more generic.
1058 kes Fixed bug #856 autochanger documentation.
1059 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1060 kes Add new cats entry point so Win32 builds.
1062 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1064 kes Do better checking for the MySQL 64 bit libraries looking for both
1065 .a and .so libraries.
1066 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1067 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1068 kes Require the thread safe version of MySQL during configure. Thanks
1069 to Andre Noll for pointing this out.
1070 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1071 continuing in migration code.
1072 kes Apply implementation of tray-monitor font derived from gnome-console
1073 submitted by Andreas Piesk <a.piesk@gmx.net>
1075 kes Eliminate important memory loss in SQLite
1076 kes Fixed the batch insert MySQL thread specific data that was not
1077 being freed. See cats/mysql.c:db_thread_cleanup().
1078 kes Fix restore before command.
1079 kes Convert old hdr.name to name() in a few places.
1080 kes Implement update jobid command.
1081 kes Return all time_t dates in db_get_job_record()
1082 kes Stop watchdog in SD earlier.
1083 kes Put Pool just after Storage in please mount message.
1084 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1087 kes Update the po files.
1088 kes Fix Verify InitCatalog by making it cache attributes.
1090 kes Change name bacula-bat to bat for man 1 page to correspond to
1092 kes Check for client and store NULL pointers in status command. This
1094 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1095 kes Fix sign extended editing of %p.
1096 kes Clean out a little old #ifdefing in cats/mysql.c
1098 kes If time diff between DIR and FD is more than 600 seconds convert
1099 INFO message to WARNING.
1100 kes Implement heap size display in status for all daemons.
1101 kes Attempt to fix MySQL db open memory loss (not successfull).
1102 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1103 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1104 Query. This looks like a MySQL but but by doing extra releases,
1105 the memory goes away. This should fix bug #847.
1107 kes When backup fails, cancel SD before waiting for sd termination.
1108 kes If SD is waiting for FD to connect during cancel, wake up the
1110 kes Fix fsf code so that errno is correctly reported.
1111 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1113 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1114 so that Bacula doesn't later stumble into a seg fault.
1115 kes Use the term Restore Client in the restore Job report.
1116 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1117 the original job's FileSetId.
1118 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1119 spooling in migration jobs. Not yet tested.
1120 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1121 reading conf file from a pipe. However, do it with open_bpipe()
1122 rather than popen. Not yet tested.
1124 kes Fix an ugly bug where the VolCatBytes were getting updated
1126 kes Implement bconsole memory command that prints current memory
1127 usage, plus smartalloc dump.
1128 kes Clarify some error messages in backup, admin, and migrate.
1129 kes Shrink label dialog to smaller size.
1130 kes Invert Cancel OK buttons on restore to be OK Cancel.
1131 kes More strerror() to bstrerror() conversions.
1133 kes Start implementing bstrerror() in place of strerror().
1134 kes Stripping path -- seems to work.
1136 kes Prevent door and port files from being restored (mostly
1138 kes Free an unreleased buffer in compat code.
1139 kes Change console Job name from *Console* to -Console- to eliminate
1140 Win32 filename problems. Put Win32 path separator when creating
1141 Console file. This fixes bug #846.
1142 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1144 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1146 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1147 to force Win32 error message.
1149 kes First cut strip path. The data should be passed to the FD,
1150 but nothing is done with it yet.
1151 kes Enhance the digest and signature routines in the crypto
1152 library to accept a JCR and to use it to print error messages
1153 so that they will go in the Job report rather than the daemon's
1155 kes Simplify some of the verify signature code.
1156 kes Simplify a few of the alternative returns in the signature
1159 ebl Use only POSIX regex instead of GNU regex in breg.c for
1160 File relocation. It fix broken freebsd compilation.
1161 kes Convert all other Dir files to use new ua class message
1163 kes Tentative fix for missing digest signature in bug 807.
1164 kes Correct handle problem in new win32_ftruncate routine.
1165 kes Convert ua_purge.c and ua_update.c to use new ua class
1166 message routines for bat.
1168 kes Correct incorrect installation of LICENSE in Win32 installer.
1169 kes Display LICENSE at the beginning of the Win32 install.
1170 kes Attempt to correct the need for the png files to be installed
1172 kes Reapply my bat.conf install script in qt-console. I think I
1173 editted bat.pro instead of bat.pro.in and it was lost.
1174 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1175 the /var/lock/subsys for subsysdir. Also corrects typos in the
1178 kes First cut update job.
1179 kes Correct configure to include qmake of src/qt-console directory.
1181 kes Make restore job yes/mod/no print in one command so GUI works.
1182 kes First cut implementing backup and restore client.
1183 kes Correct editing in Verify output that caused a seg fault.
1185 kes Insure that bat.conf is not overwritten during installation.
1186 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1187 while I was implementing migration in March 2006 !
1189 ebl Cleanup file relocation, using char *RegexWhere instead of
1190 char *where + bool where_use_regexp
1191 kes Update some manpages and add bat manpage.
1192 kes Make a first cut at converting bacula.spec.in for bwx-console
1194 kes Apply patch from John Goerzen to add hostname as fourth argument
1195 to make_catalog_backup script.
1196 kes Fix typos I introduced into bsmtp.c
1197 kes Make pm_strxxx() routines handle input of NULL pointer. This
1198 is to protect from NULL pointers returned from SQL databases.
1199 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1200 kes Add more debug to FIFO code -- fix fifo regression test.
1202 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1203 kes Add thread timer to bnet_connect() to break from OS if wait time
1206 kes Update Win32 build to include new files, new symbols, and
1208 kes Implement socket level heartbeat (tcp_keepidle)
1209 ebl Commit File relocation patch
1210 kes Make bat have 'make install' target.
1211 kes Warn during install if old gnome-console binary found.
1212 kes Warn during install if old wx-console binary found.
1213 kes Add -8 option to bsmtp command line to add content type utf-8.
1214 Fixes bug #809. (Character coding problem in bsmtp).
1215 kes If < is found in target (from, to, cc) then do not enclose the
1216 target in < > in bsmtp. Fixes bug #772 (malformed address).
1217 kes When printing certain items in dbcheck, stop after 300000.
1218 Fixes bug #822. (dbcheck loops).
1219 kes Incorrect status in Dir after waiting for mount with poll set.
1222 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1224 kes Print waiting to reserve a device every 5 mins.
1226 kes Don't call close_part in label.c if tape and relabel.
1227 kes Don't free volume if busy in close() -- should help with
1229 ebl Fix #824 RunScript bug (After script could be execute twice)
1230 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1231 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1232 Add a regression script to test RunScript
1234 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1237 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1238 deprecated. No additional bugs will be fixed, and they will be dropped
1239 in a future release (probably 2.4.0).
1240 kes Change name of wx-console to bwx-console to make it more Bacula
1242 kes Change the name of gnome-console to bgnome-console to make it
1245 kes Some time in March, a Feature Request with patch from Jorj Bauer
1246 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1248 The ability for the director to validate a Client (FD) CN against
1249 an arbitrary set of patterns rather than the hostname, with
1250 A new 'TLS Allowed CN' set of directives which are implemented
1251 in the Client resource. Then pattern matching is used in place
1252 of hostname matching against the Certificate's CN. As an example, we
1253 have certificates which (a) use a local CA, and (b) have a CN of the
1255 kes Add new/changed entry points to Win32 build
1256 kes Create unaccepted-projects for projects that are not accepted.
1257 kes Simplify locking in the reservations system.
1258 kes Add more debug code in reservations.
1259 kes Make sure error condition on reserving a volume is handled correctly.
1260 kes Correct handling of volume_in_use.
1261 kes Correct handling of initializing a device.
1262 kes Move handling of broadcasting releasing a device into release_device().
1263 kes Correct attaching dcr to dev so that it is only done if device
1264 is properly initiated.
1266 kes Locking debug level tweaks in SD.
1267 kes Tweak new Volume code.
1269 kes Add exec external-command [wait-seconds] to bconsole. This
1270 executes the external-command. Note! normally external-command
1271 should be enclosed in double quotes.
1272 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1273 it should normally be off in a production system.
1275 kes Implement die command for SD so that we can force it to dump.
1276 kes Implement SD lock debug code.
1277 kes Implement new algorithm for keeping Volume list in SD. It
1278 is now owned by the device.
1280 kes Implement new code for freeing in use volumes that should
1281 resolve if not all, some of the problems of multiple drive
1282 tape conflicts described in bug 801.
1284 kes Fix gui/bacula-web/images files in svn.
1285 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1287 ebl Fix a bug in batch mode (in string escape)
1288 kes Correct migration prune SQL typo that crept in in a
1289 recent 2.1.x change.
1291 kes Move bnet_despool() into class in bsock.c
1292 kes Modify job report to include director name and Build OS.
1293 kes Move drop root privilege and check_catalog() before fork.
1294 kes Add update database scripts (version 9 to 10) to updatedb directory.
1296 ebl Check size and age of each file after its backup to see if
1297 it has changed during backup, if 'checkfilechanges' is set.
1298 The FD will do an extra check (stat(2)) after
1299 each file backup. mtime, ctime and size are compared with
1300 'before backup' information. If time or size mismatch, an
1301 error message will be generated. You must upgrade FD to use it.
1303 kes Make database name and user configurable
1304 --with-db-name=xxx --with-db-user=xxx
1305 kes Add back database type to message.c for debugging.
1307 kes Implement dir_sql() which issues an SQL query.
1308 kes Modify bat medialist to use dir_sql() and do some minor C++
1309 formatting as well as eliminating a number of pointers, simplifing
1312 kes Fix some of the mtx-changer grep commands for tape label readers.
1313 kes Convert a number of bsendmsg into the appropriate send/warning/error
1314 message class calls.
1315 kes Suppress the using database message in the .sql command.
1316 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1318 kes Add context menu for floating a window.
1319 kes Some minor cleanup and name changes in qt-console
1320 kes Add doing mt setblk 0 in Win32 mtx-changer.
1321 kes Apply Martin's bug fix to move definition of ENODATA for
1323 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1324 sqlite2 and sqlite3.
1326 kes More pruning cleanup.
1327 kes Turn on wait_for_drive by default in mtx-changer.
1328 kes Turn on Batch insert code by default as it now passes regression.
1329 kes Add ./configure --enable-bat to enable building of Bat.
1330 No install yet though.
1332 kes Implement a new .sql command for bat.
1333 kes Implement code to turn off pruning in obtaining the next volume.
1334 Pruning is turned off for the status dir command, but turned on
1335 for SD requests and for the list nextvolume command.
1337 kes Correct Qmsg() that was not updated correctly when committing a
1338 previous change (probably the recent TLS patch).
1340 kes Write new subroutine is_volume_purged() that explicitly checks
1341 if the Volume is purged, and if so marks it as such. This should
1342 resolve problems reported about needing to mount twice to recycle
1344 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1345 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1346 amount of duplicated code.
1347 kes Do volume pruning only for the Media Type desired (reduces pruning time
1348 if multiple Media Types are in the same pool).
1349 kes Implement more detailed info in the Job report for the Bacula version
1351 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1353 ebl Add bbatch tool to bench database and insert mode.
1354 Fix sql quote stuff in batch mode
1355 Fix sql stuff for mysql
1357 kes Correct problems with am/pm scheduling. Fixes bug #808.
1358 kes Implement new prunning code that prunes up to 1000 jobs at
1359 the same time. The same technique can be applied to a number
1360 of other prune/purge subroutines.
1361 kes Add an insanity check when starting a new tape job to ensure
1362 that the tape position has not been changed. If so fail the
1364 kes Fix Win32 build for dlls to add the folllowing:
1365 src/lib/bsock.c -- new file with new entry points
1366 src/lib/dlist.c -- new entry points
1367 src/cats/sql_create.c -- new entry point
1368 src/cats/sql_cmds.c -- new DATA item exported
1370 ebl batch mode cleanup bscan-test is ok now.
1371 kes Implement SD code to check length of disk volume before appending.
1373 kes Correct return status on db_batch... routines.
1374 kes Add call to db_write_batch_file_records() to migration code.
1375 ebl Fix AfterJob timing
1376 kes Move the checking of the database in initializion of the Director
1377 to after we drop privileges. This avoids the need for both root
1378 and bacula access to the DB.
1379 kes Correct a misplaced variable definition in src/filed/backup.c
1380 kes Correct how the new batch insert db_create_attributes_record()
1381 uses the arguments. Caused a seg fault in bscan.
1382 kes Implement lock() and unlock() methods in DEVICE class.
1383 Implement block() and set_block(xx) methods in DEVICE class.
1384 kes Modify bnet_connect() so that it uses time() to check for the
1385 wait time expiring (on some OSes, some system calls may not
1386 return immediately).
1387 kes Modify Verify to obtain the previous JobId when it is actually
1388 running rather than at schedule time (as it was in 1.38.x).
1389 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1391 kes When checking pid in pid file, continue running if the pid is
1392 the same as ours. This occurs on IRIX after a system crash.
1395 kes Extend new GUI API.
1396 kes Make the ua structure a class, and implement send_msg(),
1397 error_msg(), warning_msg(), and info_msg().
1399 kes Apply fix from for building wx-console on the Mac from
1401 kes Implement new select mechanism for GUI programs.
1402 kes Reorganize initialization of stackedWidgets in bat.
1404 kes Add updated nagios plugin supplied by Christian Masopust.
1406 kes More bat implementation.
1407 kes File migrate bug with Pool Occupancy using mediaid instead
1408 of jobids. Fixes bug #795.
1409 kes Fix orphaned buffers in filed backup and verify due to
1410 crypto buffers not freed during errors. Fixes bug #789.
1411 kes Extend new GUI api code to tree commands.
1412 kes Ensure that tree and dot commands check console ACLs.
1413 kes Permit marking directory with trailing slash.
1414 kes Allow 20 console connections (instead of only 10).
1416 kes Add smartctl call to bacula-sd.conf as an example of getting
1419 kes Modify jobq.c to let simultaneous restore jobs run. This may
1420 cause them to fail if they cannot get a drive.
1421 kes Add Client Connect Wait to Storage daemon to permit users to
1422 modify the time the SD waits for a FD connection.
1424 kes Correct virtual changer check which was backwards. This caused
1425 volumes to be unloaded into slots already occupied.
1427 kes Apply Command ACL filter to JobId list in restore command.
1428 kes Correct typeo in var.c patch.
1430 kes Don't let Bacula prune File or Job records for the current Job.
1431 kes Fix variable substitution pad + inc bug reported (with patch)
1434 kes Correct SQLite log table index as reported by Luca Berra.
1436 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1438 kes Begin implementing new comm signals for API.
1439 kes Fix a few places in lib/message.c where the open fd may
1441 kes Continue implementing lib/bsock.c (real class). Make jcr,
1442 who, host, and port private. There are new methods to access
1443 them for non-class use. This required touching a number of files.
1445 kes Add LANG=C to autoconf/randpass so it works with languages other
1446 than English. Fixes bug #788.
1448 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1450 You will not be able to generate Include/Exclude list any more.
1451 It will be fixed soon.
1452 If you want to use this, you can apply
1453 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1455 kes Restore of sockets created false error messages because Bacula
1456 no longer restores sockets, but the code was still trying to
1457 set the attributes on a non-existent file. Reported by a user.
1458 ebl finish RecyclePool feature
1459 Media will takes Pool.RecyclePool
1460 when moving from Scratch to a Pool or when user will do
1461 update volume=xxx frompool
1462 To use it, add RecyclePool = aPool to your Pool resource
1465 RecyclePool = Scratch
1469 kes Expand new BSOCK class adding signal() and new BNET signals.
1470 kes Begin enhancing the dot commands adding a new API function
1471 that returns more information and will make it easier
1472 to interface to the Director from a program.
1474 kes Make DEVICE fd private. Its new name is m_fd, and can be
1475 obtained with dev->fd() outside the class. This is the
1476 first of many DEVICE members to be made private.
1477 kes Implement Michael Renner's idea on having a virtual disk
1478 changer. I made some minor modifications (e.g. I did not
1479 implement the Virtual Changer directive, but simply set
1480 the Changer Command to an empty string.
1482 kes Implement a BSOCK send() method that writes the whole record
1483 in a single write() request rather than in two.
1484 ebl add update volume=xxx recyclepool=yyyy
1485 volume takes recyclepool from pool when using update volume=xxx from pool
1487 kes Fix encryption deblocking bug, which caused some restored files
1488 to be truncated. This fixes bug #763.
1489 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1490 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1492 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1493 ebl Use btime_t instead of uint64_t in media patch.
1495 kes Optimize the use of the database a bit in the Status dir command.
1496 Only open it when needed, ensure that if any previous database
1497 was opened, it is closed.
1499 kes Correct VolCatBytes bug from media patch.
1500 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1501 in the case of orphaned records.
1502 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1503 and File records in 300K chunks to be more efficient. This
1504 idea came from Juan Luis Frances (if I remember right).
1505 kes Apply Eric's scratch patch that moves a purged Volume to
1506 the RecyclePool. Question: how is RecyclePool set? what
1507 happens to the ScratchPool?
1508 kes Apply Eric's media patch that collects read/write media
1509 times as well as byte counts. This patch requires a
1510 simultaneous upgrade of the DIR and SD. Note, there
1511 should be some way to turn off timing. I'm not sure
1512 times are in Bacula units.
1513 kes Apply Eric's batch-insert patch.
1515 kes Update projects list.
1517 kes Implement Include/Exclude file lists in FD as dlists using
1518 the new dlistString class. This permits efficiently having
1519 large include/exclude lists and completes project Item 25.
1520 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1521 console is authorized to cancel the job. This fixes bug
1523 kes Modify SD so that the VolCatJobs medium record is updated
1524 at the beginning of a Job rather than the end. This
1525 fixes bug #775 where exceeding MaxVolJobs caused jobs
1527 kes Added a mutex around getting and setting Volume information
1528 so that multiple simultaneous jobs will single thread.
1530 Switch to using Subversion
1531 kes Remove src/pygtk-console/ from configure
1533 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1534 plus the entrypoints.
1535 kes Apply patch supplied that corrects debug print
1536 in canceling jobs for max run time. Supplied as
1537 part of bug #621, which was previously fixed.
1539 kes Test on job_canceled() and sd_msg_thread_done inside
1540 loop starting the message thread to avoid a race condition.
1542 kes Remove rl_catch_signal from console.c as it conflicted
1543 with the header definition. Fixes bug #765.
1544 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1546 kes Clarify some stored/acquire messages to indicate if the
1547 problem is with read or append.
1549 kes Fix memory leak with storage ids in cats/sql_get.c
1550 kes Terminate watchdog earlier to avoid reference to released
1551 memory -- reported by Jason Austin.
1552 kes Move closing the database from jobq.c to the director daemon
1553 termination routine. This fixes memory leaks for shadow jobs
1554 (i.e. migration jobs).
1555 kes Free up the unique jobid chain items in migrate.c. This fixes
1556 a memory leak problem.
1557 kes Convert some ugly looking for statements to use foreach_alist
1558 in findlib/find.c. This will facilitate converting the structures
1559 to use dlist (for large include/exclude lists).
1560 kes Fix a bug in the btree.c and btree.h routines, then rename them
1561 rblist and add them to be built in src/lib. Include some new
1562 methods written by Rudolf Cejka that make the code more readable
1563 (hides some of the ugly casting).
1564 kes Add set_next() and set_prev() methods which make the code much more
1565 readable. Also add a new dlistString class that facilitates storing
1566 strings in dlists. To be used in the large include/exclude lists.
1567 kes Make some trivial modifications to lib/tree.h that use rblist
1568 rather than dlist for storing the tree links. This was suggested
1569 by Rudolf Cejka. The result of this is that the restore tree now
1570 uses red-black binary trees rather than simple linked lists. This
1571 should give rather dramatic speed improvements for directories
1572 contining large numbers of directories/files (more than 10000).
1574 kes Fix maxruntime bug #621.
1576 ebl Implement the include JobID in spool file name project.
1577 kes Reorder projects file in order determined by Jan 2007 vote.
1578 kes Implement item #12 on project list -- quick release of FD by
1580 kes Fix open of SQLite3 db where user does not have write permission
1581 so that DIR does not crash. Fixes bug #761.
1583 kes Add back missing @ in Win32 Makefile.
1584 kes Change 'Device not configured to autolabel' from INFO
1586 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1587 which should restart an indefinite # of times.
1588 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1589 other DIR specifications.
1591 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1592 Fix path quoting in SQLite scripts.
1593 Fix problems with SHGetFolderPath.
1595 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1597 kes Fix Job restart on error bug that promotes an Inc to a Full
1598 backup. This should fix bug #755.
1599 kes Add qt-console and first cut of code.
1603 kes Fix Bacula->Documentation link on Win32 to point to index.html
1604 instead of bacula.html. Fixed bug #750.
1605 kes Return JobId in db_get_job_record() when JobId==0. This should
1607 kes Do not release source pointers when restarting a failed job.
1609 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1610 This *should* fix bug #747.
1611 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1614 kes Modify USTORE constructor to set an empty store_source string,
1615 and don't copy the store_source string in a cancel. Hopefully
1616 this will fix Arno's seg fault, bug #744.
1617 kes Add back code to disable conio in configure. Fixes bug #743.
1618 kes Correct the Options scanner in the FD to correctly handle
1619 SHA1 option, which was eating the next option. Reported by
1621 kes Add code to indicate when the SD is spooling, spool wait, and
1622 despooling as requested by Alan Brown.
1624 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob