1 Technical notes on version 2.4
5 kes This code should fix the race condition that leads to a Director
6 crash at job end time when the job list is updated. This was reported
9 kes Remove all double quotes from SQLite creating script and
10 replace by single quotes as suggested by John Huttley.
12 kes Fix SQL case problem that may cause the failure of DiskToCatalog
14 kes Copy missing storage name into edit buffer. As far as I can tell
15 this never caused a bug.
17 ebl Remove catalog dependency for bcopy
18 ebl Modify catalog scripts to have an easier packaging integration,
19 using default variables.
20 Make difference between SQLite3 and SQLite in db_get_type()
22 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
23 job when reading from one autochanger and writing to another.
25 kes Add more information to SD acquire.c INFO messages.
26 kes Fix NULL Volume name error when reading and the drive must
29 kes Fix a Verify InitCatalog problem where in certain cases
30 a garbage filename may be entered in the verification database. This
32 kes Add space after version before date in bat about dialog.
34 kes Fix seg fault in Dir during estimate command with no level value
35 given. This fixes bug #1140.
37 kes Add message to migration job when the target job is already migrated.
38 This closes bug #1129.
42 kes When a migration job actually runs, re-check the Job record
43 and skip if the job is already migrated. This should
44 significantly reduce the problems with bug #1129.
46 kes Break the do_swapping into do_unload, do_swapping, and
47 do_load. It is much more logical that way.
48 kes Implement a set_dcr_from_vol subroutine in acquire.c for
49 reading volumes. This allows the dcr to be refreshed after being
50 zapped when the wrong volume is mounted.
51 This should fix bug #1126 -- During multiple tape restore, bacula
52 does not ask for physical tape change, but rereads same tape
54 kes Apply patch submitted for bug #1107 with a small modification.
55 This fixes a bug where bcopy copied too many records.
56 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
58 kes Make the default bat restore Pool be Any. This fixes bug #1118.
61 kes Fix bug #1125 which reports a SD crash at the end of a tape
62 during restore. It was a debug statement that should not be
65 ebl fix #1034 by setting big timeout on mysql connections
67 kes Do partial integration of the Win32 bat build created by Eric.
68 kes Fix bat not to block.
70 kes Ensure that SD tried to mount a volume not in an autochanger
71 at least once before asking for operator intervention.
72 kes Fix a pthreads bug in the Win32 pthreads emulation code.
76 kes Clear in-use bit on vol when unused while swapping.
78 kes Remove sleep at end of ./bacula
79 kes Clear hash packet for hardlinked files correctly. This corrects
80 a long standing bug where hardlinked files selected individually
81 would occasionally not be restored.
83 kes Apply Eric's patch to ensure that autoprune does not return
84 a Volume not in the autochanger unless requested to do so.
85 kes Correct bat restore display of multiple drives. This fixes
87 kes Do find_a_volume() each time an unload is done. This
88 fixes the failure of maxvol2-test.
90 Release Beta version 2.4.1-b2
92 kes Use Qmsg() in job.c watchdog callback.
94 kes Release main control rwlock if ABORTing.
95 kes Make watchdog connect timeout queue messages rather than sending
96 directly to avoid lock conflicts with the real thread.
97 kes Remove const char that causes problems with Python, which has
98 older 'incorrect' headers.
99 kes Add const char in dbd.c to avoid compiler warnings.
101 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
102 mt. This fixes bug #1116.
103 kes Fix failure of 2drive-concurrent-test. Always read label;
104 clear_unload() only after drive is defined in acquire_for_read().
106 Release Beta version 2.4.1-b1
108 kes Back out bad src/lib/base64.c change.
110 kes Generally clean up the manual tape loading code. The main
111 conceptial change is that when a volume is marked to be unloaded,
112 its volume name is retained, and it is only marked as unloaded
113 when either the autoloader says it is unloaded or another tape
114 is read on that drive.
116 kes Fix a recycling problem with two autochangers reported in bug
117 #1106. This may also (unlikely) fix a second recycling bug as
119 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
121 kes Fix format problem in bscan output reported in bug #1105.
123 kes Copy more data when restarting a job so that run
124 overrides are kept. This should fix bug #1094.
125 kes Backport updates to jobq.c where possible.
127 kes Fix bug where SD did not ask operator if the device could not
128 be opened. Reported by Eric.
130 kes Add dbuser to DIR conf file (replaces user).
131 kes Add --with-db-password to ./configure
132 kes Fix regress to handle db_password.
133 kes Fix a couple of pedantic compiler warnings.
134 ebl Fix bug when starting a restore on a storage that doesn't
135 have the requested MediaType.
137 kes More work on word alignments -- eliminate all ints from
138 the configuration routines.
140 kes Fix bug reported by Scott Barninger where the bacula script
141 refers to scripts in the wrong directory. Needed to meet the
142 requirements of recent FHS location changes.
143 kes Fix word alignment problem on non-Intel 64 bit machines
144 such as Solaris. This should fix bug #1097 -- bus error in SD.
146 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
148 Release Version 2.4.0
150 kes Update version to reflect the magnitude of the SD changes.
152 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
153 This fixes bug #1095.
155 kes Add create_postgresql_database.sql to Win32 installer. Should
156 fix problem reported by Juilio Monteiro.
157 kes Get correct slot when auto unloading a device. This fixes bug
160 kes Fix multiple media restore.
161 kes Make DEVICE Slot private and access it via a method.
162 Allows better control over when it is set and cleared.
163 kes Fix possible seg fault if SQL error.
165 kes Add debug code to SD.
166 kes Fix renaming a Volume, which used the wrong Volume name.
168 kes If operator has rewind tape, print warning, release tape and
169 try once more. If tape is positioned somewhere, something went
170 wrong, so mark the tape in error and try once more. Previously
171 this error was fatal, now it produces an error message.
172 kes Ensure correct volume name displayed during restore
173 kes Ensure that Volume is mounted for restore.
175 kes Fix a few more Coverity reported problems.
177 Beta Release Version 2.2.10-b4
179 kes Enhance a couple of SD debug messages.
180 kes Tweak unload flag setting and ensure it is set during swap.
182 ebl Fix #1091 about bad output in estimate command.
184 kes Modify autochanger locking to attempt to avoid race
186 kes Make sure device not busy before doing label command.
187 kes Display open() errors except when polling. Previously too
188 many were suppressed. This should fix bug #1070.
189 kes Fix Win32 reparse points. Bacula will not recurse into any
190 reparse point directory, including mount points, unless the
191 directory is explicitly mentioned at the top level (same as
192 with Unix). A file that is linked to another file will be
193 backed up -- much as Unix does for hardlinked files.
194 This fixes bug #1041.
196 kes Remove double quotes from ChangeLog and ReleaseNotes
197 kes Remove StorageId test when pruning and recycling (Eric's changes).
198 kes Remove old form of locking when getting volumes -- causes deadlock.
200 kes Fix buffer overruns detected by Coverity.
202 Beta Release Version 2.2.10-b3
204 kes Tweak joblog display.
206 kes Implement --without-qwt
207 kes Fix layout of restore tree dialog
208 kes Add configure bat QWT libraries, so that bat can be built
209 with or without the QWT libaries.
211 kes Apply batfix bat cleanup patch from Riccardo.
212 kes Make sure we unload the right slot when swapping.
214 kes Improve SD reserve debug code.
215 kes Testing an improvement to free up volumes no longer in use.
217 Beta Release Version 2.2.10-b2
220 kes Rework SD acquire for read to handle autochanger Volume
222 kes Implement regression that explicitly tests swapping a Volume
223 from one drive to another.
224 kes Enhance disk-changer to detect most error conditions.
225 kes Fix SD code so that it properly swaps a Volume between drives.
226 This fixes bug #1083.
228 kes Prevent a Volume that is being swapped from being freed from
229 the volume list. This will most likely fix, at least partially,
231 kes Fix strippath so that it does not get a buffer overrun and crash FD.
232 This fixes bug #1078.
233 kes Make inability to change owner/group when creating a dir only a
234 warning rather than an error.
236 ebl Fix SQL query in migration code
238 kes Force unload of volume when wrong volume mounted in SD.
240 kes Fix bat seg fault at termination.
241 kes Add Bacula generated version to bat about box.
243 Beta Release Version 2.2.10-b1
245 kes Permit multiple simultaneous restores -- experiment.
247 kes Backport development stream SD reservation system changes.
250 kes Move final volume swapping code to DCR method and
251 call it from acquire_for_read().
252 kes When wrong volume is mounted during read, unload_autochanger.
254 kes Stop searching for Volumes in SD askdir if DIR returns the
255 same volume name twice in a row.
257 kes Tweak the swap Volume from one drive to another code so that
258 it now seems to work.
259 kes Resolve several problems with recycling that broke the new
260 code (these problems are in 2.2.9 as well).
261 kes Remove the volume lock when calling the sysop code.
262 kes Don't mark a reserved volume with no writers as unused otherwise
265 kes Rework class structures for VOLRES, DCR, and DEVICE to make
266 the method names a bit more logical, and for more logically
267 handling the responsibilities.
269 kes Remove redundant code in terminating the scheduler that just
270 causes a seg fault in many cases.
271 kes Cleanup releasing a volume and make it a DCR method.
272 kes Improve algorithm for detecting pre-reserved volume and
275 kes Tweak volume swapping code so it works.
276 kes Correct name overloading in mount.c
277 kes Replace released flag in VOLRES with reserved and add access
278 methods for the VOLRES class.
279 kes Prevent volume from being released while being swapped.
280 kes Refactor parts of stored/mount.c
282 ebl Add sanity checks for VolWriteTime and VolReadTime
283 ebl Take care of bad clock changes while computing VolWriteTime
284 and VolReadTime. This should fix or limit #1066
285 kes Correct error string numbers in dird/catreq.c
286 kes Restructure reserving, acquiring, and mounting volumes. Calls to
287 autochanger are deferred for mount.c -- simplifes the code.
289 kes Do not prune any running job. It just fails the job.
290 kes Lock the volumes when changing dev->reserved_device and marking
291 the volume unused otherwise the device can get reserved by
292 another job before the volume is released, thus blocking it.
295 Beta Release Version 2.2.9-b7
297 kes Close bat console windows first to eliminate error message
299 kes Remove useless code in Scheduler that causes seg fault on
301 kes Correct some SD catalog request error messages.
302 kes Don't allow pruning of any running job.
303 kes Turn off code in read_record that causes a seg fault in the SD
304 when reading past an EOS_LABEL.
305 kes Turn off unloading the autochanger in reserve.c as it just
307 kes Lock volumes when unreserving a device.
308 kes Do not mark volume unused when recycling.
309 kes When acquiring, don't mark volume unused if it is reserved (busy).
311 Beta Release Version 2.2.9-b6
313 kes Eliminate ./configure warning on po directory
314 kes Fix bug #1063, reuse of freed ptr in list nextvol.
315 kes Release regex compile buffer in filed/job.c
316 kes Add proper type of const char in sql_create.c
317 kes Turn off debug in daemon termination routines
318 kes Move free_volume_list() before devices are freed in stored.c
319 kes Fix reference to uninitalized stack variables in bregex.c.
320 This should correct bug #1067.
322 kes Fix possible seg fault in SD when freeing a volume entry.
324 kes Apply patch from bug #1069 that corrects spurious error messages
325 when ACLs enabled on SGI but no ACL exists.
326 ebl Fix a storage deamon segfault at debug level 500.
328 Beta Release Version 2.2.9-b5 -- not released
330 Beta Release Version 2.2.9-b4
332 kes Re-enable code to remember last volume mounted on a non-tape
334 kes Add patch supplied in bug #1068 that fixes a SD crash when using
335 a Virtual autochanger.
336 kes Generate correct JobMedia records during spooling/despooling when
337 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
338 <tih@hamartun.priv.no> for excellent analysis and testing.
340 Beta release Version 2.2.9-b3
342 kes Rework certain SD locking based on gdb tracebacks of deadlocks
343 sent by Eric. This code now uses only the volume_lock() rather
344 than the reservations lock when at EOM and acquiring a new
346 kes Ensure only one exit point in several subroutines.
348 Beta release version 2.2.9-b2
350 kes Fix to initial tape drive open to release the volume name
352 Beta release Version 2.2.9-b1
354 kes Fix to JobMedia fix.
355 kes Fix bug pointed out by Peter Much that causes the StorageId to
356 be updated when reading a tape (during migration, it could have
357 been incorrectly set to the write StorageId).
359 kes Implement autostart scripts for Debian
361 kes Fix mtx-changer.in for broken Debian mt program.
363 kes Massive commit of all fixes and back ports to create 2.2.9
365 kes Apply doc fix from bug #1062.
366 kes Resolve crash and improper restore wx-console Win32 restore
367 GUI. Fixes bug #1065.
368 kes Update Win32 wxWidgets to latest version.
369 kes Attempt to do correct handling of Win32 mount points. Should
371 kes Fix Win32 FD backup/restore memory leak due to improper termination
372 of BackupRead/Write. This fixes bug# 1038.
373 kes Add const to AIX prototype for initgroups()
375 kes Undo bug #1047 heap overrun fix as it is not correct.
377 kes Fix creating first JobMedia record during Migration to include
378 proper index. This caused slow restores of migrated jobs.
380 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
381 and do not strip paths on symbolic links.
382 kes Set catalog backup database and user name from values specified on
383 the ./configure line.
384 ebl Apply patch to correct bug #1031, about wrong pool source information
387 Release Version 2.2.8
389 kes Apply patch from Martin to correct bug #1040, bscan sets existing
391 kes Fixed important spelling error in doc -- bug #1045.
393 kes Move initialization of read/write res lock earlier in the code.
394 This fixes the crash with a null conf file. This fixes bug
396 kes Redefine CURES in lib/parse_conf to be URES and move it all
397 into lib/parse_conf.c -- this responds to bug #1042, but does
398 not fix it. The fix is not to compile with FORTIFY_SOURCE.
399 kes Backport fix de-referencing a NULL pointer in the scanner from
400 the trunk SVN. I don't think this was reported as a bug.
402 Beta release Version 2.2.8
404 kes Re-enable the new job code editing (%f).
406 kes Fix bsnprintf for float point numbers. I broke recently when
407 parameterizing some variables. This fixes bug #1036.
409 kes Move Heartbeat documentation from Job to Director resource.
410 This fixes bug #1033.
412 kes Fix existing switch drive SD code to call autochanger to release
413 any old volume. This must be done to keep the autochanger from
414 releasing subsequently newly reserved volumes in doing a close().
415 This should possibly fix bugs #1032 and #1018.
416 kes Apply big backport of current SVN SD code that corrects a number
417 of race conditions. This is a first step in fixing bug #1018.
419 ebl Fixes bug #1028 where "Selection Type" option was not usable
423 Release Version 2.2.7
425 kes Partial back out (disabled) %f job code editing because it
426 does not build on Win32.
427 kes Fix seg fault Frank Sweetser reports in regression testing
428 on his systems. The problem was that the original author of
429 bsnprintf.c did not take into account the side effects of
430 using ++x in the argument to a #define.
432 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
433 that implements double quoting include names in conf files,
434 and also allows piping input by having the first character
435 be a vertical bar (|).
436 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
437 that implement %f in RunScripts to pass the FileSet name.
438 kes Skip leading | when lex input comes from a pipe as suggested
439 by Michael Stapelberg <michael@stapelberg.de>.
441 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
442 Nerijus Baliunas <nerijus@users.sourceforge.net>
444 kes This patch corrects a problem where the maximum concurrent storage
445 jobs counter gets out of sync during restore jobs causing jobs to
446 'wait on max Storage jobs'. This patch fixes bug #1009.
448 kes Add new include to postgresql.c suggested by Marc Cousins so
449 that it compiles correctly with pgre version 8.3. Also fix
450 misuse of %x with pointer (should be %p).
452 kes This patch fixes bcopy so that it produces correct Volumes.
454 kes This patch eliminates spurious output to the console during a VerifyVolume
455 job that contains encrypted data. It fixes bug #1024.
457 kes This patch prevents the 'status dir' command from trying to use a scratch
458 volume and possibly moving it from one pool to another. This patch fixes
461 kes Fix --archivedir addition to configure. Replace it with
462 --with-archivedir in configure.in This fixes the regression
464 kes This patch fixes bug #1012 where the job is canceled because
465 of Max Run Time exceeded when the job has not yet started.
467 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
468 one 'part' to write. Instead of each part being stored on disk,
469 written to DVD, then deleted from disk, all parts are written to disk,
470 and only the last is written and deleted from disk.
472 kes Correct typos in disk-changer.in
474 kes This patch fixes the status command to include the formating string for
475 JS_AttrInserting. It fixes bug #1021.
476 kes This patch should fix the Mac OS X build problem on the latest
477 Darwin, where sys/types.h was not included correctly (apparently
478 due to a change in the Mac headers). The solution was to explicitly
479 ensure that it is defined for the ./configure.
480 This patch also has a rebuild of configure that includes the Debian
481 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
482 kes This patch should ensure that queued messages to the console are
483 displayed as soon as possible. It should fix bug #1007, but has been
484 reported not to work.
486 kes This patch fixes the infinite loop when trying to increase the
487 maximum number of volumes in a Pool during the add command.
488 This patch fixes bug #1008.
490 Release Version 2.2.6
492 kes Get fix for joblist bug in bat from trunk.
494 kes This patch fixes bug #1003 where putting the message output from
495 a Verify job into the catalog results in a recursive loop. The problem
496 seems to show up only with postgresql (to be verified).
498 kes Fix bug #942 where lots of emails where generated when the heartbeat
499 interval was low and Bacula wanted a different tape from the one in
502 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
503 which was updated during a restore (or a reading migration) bug #982
505 ebl Use qmake-qt4 instead of qmake when available (debian system).
507 kes Add a security warning to src/cats/make_catalog_backup.in indicating
508 that passing the password via the command line (arg 3) is insecure.
509 This responds to bug #990 (it doesn't fix it).
510 kes Apply 2.2.5-postgresql-errors.patch
511 kes Remove unneeded File table index on JobId, which is already
512 present as the first index of another multi-index.
514 kes Set default debug_level to zero. This corrects bugs #991 and #993.
515 kes Fix a crash in bat when it cannot connect to the Director for example
516 if the Director is not running.
518 kes Activate Close button on tray-monitor window. This fixes
521 kes Fix spurious warning message printed when creating a volume with
522 a LabelFormat. This fixes bug #976.
524 Release Version 2.2.5
526 kes Add JobId in place of Job name in all the Jmsg() output.
527 kes Correct the APP_DESC for the Win32 storage service (remove an e).
529 kes Add new SD despooling attributes and Dir inserting attributes
530 job status codes. This fixes bug #961.
531 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
533 kes Fix doc issue. This fixes bug #963.
534 kes Fix listing performance problems in bat. Pointed out by
536 ebl Fix replace on restore. This fixes bug #969
537 kes Fix bat code that tests for Win32. This should fix bug #968
538 kes Query 5 list wrong Vol after migration. This fixes bug #960
540 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
541 in back porting from 2.3.x
543 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
544 The details are included in the notes in this file.
546 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
547 messages; it fixes a problem opening the SQLite3 database when multiple
548 simultaneous jobs were running; it fixes a bug with certain versions of
549 MySQL where batch inserts failed because of table name character case
550 (upper/lower) differences.
551 kes Fix race condition that drops final block written to volume.
552 This happens in rare cases with multiple simultaneous jobs
553 when the Volume fills. This fixes bug #964. May be related
554 to bug #935 and possibly #903.
556 kes Fix FD->SD authorization failure, which was due to spurious
557 wakeups from a pthread_cond_timedwait(). Simply check the
558 predicate before continuing. This fixes bug #953
559 dvl Add new configuration item --archivedir
560 dvl Adjust regression tests to use tmp not /tmp. This will allow
561 multiple concurrent runs of the regression tests.
563 kes Eliminate more strerror() and replace with bstrerror().
564 kes Remove BSD getopt and replace with unrestricted IBM version.
565 kes Fix Win32 build for changed calling sequences.
567 kes Fix FD->SD authorization failure, which was due to spurious
568 wakeups from a pthread_cond_timedwait(). Simply check the
569 predicate before continuing. This fixes bug #953.
570 kes Add const char where needed (more to do).
572 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
573 kes Don't overwrite error message in check_tables_version.
575 kes Unlock batch insert tables with same calls used elsewhere.
576 kes Allow starting 59 jobs a second.
577 kes Make SD session key more random.
578 kes Add retry for SQLite opening db if it fails. Probably helps
580 kes Suppress extra error messages during batch insert failure.
582 kes Put some FD auth code on dbglvl rather than fixed.
583 kes Return insert attributes error message in db msg buffer to avoid
584 false error messages. Helps fix bug #966.
585 kes Separate batch init error messages. Probably helps fix bug #966.
586 kes If Dir gets an error during inserting attributes, cancel SD.
587 This reduces unnecessary error messages.
589 ebl Cleanup batch insert code. Probably fixes bug #965.
591 kes Turn off some code when batch insert not enabled.
592 kes Edit FD name in connect error messages.
594 kes Add code to handle tray monitor separated from Win32 FD.
595 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
597 kes Fix ANSI tape labeling. This fixes bug #954.
598 kes Increase the max block size to 4MB fixes bug #957.
599 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
600 is not properly mounted (recognized) during a poll.
601 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
602 Job that has differences reports Verify OK.
603 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
605 Release Version 2.2.4
607 kes Increase size of name string when FD making connection to SD.
610 kes Add waits to multiple exit detection code to try to force pid
611 file to always be deleted.
612 kes Restore good dev.tar.gz to rescue set appropriate binary property.
614 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
615 trying to switch drives by checking for blocking before unblocking.
617 kes Cancel storage daemon in all cases where FD reports error. This
618 should fix virtually all cases of bug #920.
620 kes Fix error message that was clobbered when Dir tells SD it does not
621 have write permission on Volume. This should fix a minor point
622 in bug #942, but not the main problem.
623 kes Add code to cancel job in SD if FD connection fails. This should
625 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
626 kes Fix migration code to get correct Volume name with multiple volumes
627 by skipping |. Fixes bug #936.
628 kes Implement patch supplied by Landon to fix bug #944 where using
629 TLS with bconsole uses 99+% of the CPU.
630 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
632 kes Move patches into patches directory.
634 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
637 ebl Using 'm' in bconsole will show messages like before,
638 and not memory usage.
640 Release Version 2.2.3
641 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
644 kes Fix bug #935, and probably also bug #903 where files were not
645 restored. MediaId was not properly set in JobMedia record after
648 kes Add ./configure search in qwt-qt4 for qwt package
649 kes Apply Martin Simmons patch that should turn off the new API usage
650 when batch insert is turned off allowing building on older
653 Release Version 2.2.2
655 ebl Detect if new PosgreSQL batch insert API is present.
656 kes Correct incorrect mempool call causing Director crash.
657 sb Update spec files for 2.2.1 release
659 Release Version 2.2.1
661 kes Update POTFILES.in
662 kes Cleanup a few underquoted AC_DEFUNs in configure
663 kes Apply patch from Martin Simmons that adds a test for va_copy to
666 kes Fix bug #921 by increasing the number of tries to create a new volume
668 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
669 can be called multiple times. Implement a version for machines
670 without va_copy() that gets a big buffer.
672 kes Integrate more portable zone offset code into bsmtp.c
673 Submitted by Attila Fülöp.
675 kes Fix bad SD->FD return status reported by
676 (James Harper) <james.harper@bendigoit.com.au>
677 ebl Fix a bug in read_close_session which return random status
678 thanks to James Harper
680 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
681 and directory names during restore of single file/directories.
682 kes Add sanity checks to .sql command when string is empty. Hopefully
683 that will resolve Dirks Director crash.
685 kes Apply patch submitted by Martin Simmons that corrects a seg fault
686 in the bsmtp chat subroutine when debug is >= 10.
688 kes Fix Director crash when running bat SQL queries.
689 kes Add David's notes on Item 8: Copy pools.
691 kes Rework projects file to be current and ready for a vote.
692 kes Enhance lex scanner error message.
694 kes Tweak LICENSE file to mention BSD code.
695 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
696 if specified on the ./configure.
697 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
698 This class is intended to allow us to open a second bsock to the
699 Director while in the restore subdialog.
701 kes Fix configure to create bat Makefile before creating dependencies.
702 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
703 kes Add a tooltip to the tray monitor.
704 dvl Set the Director's PID file before dropping privs. This fixes
707 kes Update AUTHORs file
708 kes Increase the default max concurrent jobs to 20 in FD and SD to
709 correspond with the default .conf files.
710 kes Rewrite the Win32 service routines. This eliminates the 3 copies
711 some different, of the same file created by RN when porting the
713 kes Rearrange some of the Win32 directories and the placement of the files
715 kes Set DEVELOPER flag in version.h
717 ========================================================================
718 Release Version 2.2.0
720 kes Apply a second doc patch from Marc.
721 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
722 improves the tips section that discusses how to setup multiple
725 kes Update bat README file.
726 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
727 corrects a typo in the Recycle status check in db_find_next_volume().
728 This will probably fix a number of annoying problems with multiple
730 kes Modify most of dird/msgchan.c to use bsock class calls rather than
731 bnet calls -- no functionality change.
733 kes Modify the Verify output to specify if files are missing on
734 the Volume(s) or disk. Fixes confusion in bug #916.
735 kes When more than one Volume is read in a migration job, the last
736 Volume bytes reported are from the last read volume rather than
737 the last written volume. Fixed. This fixes bug #910.
738 kes Fix display of Recycle flag after update volume=foo recycle=yes.
739 It previously printed New Recyle flag is: no. This fixes bug
742 kes Correct seg fault when switching tape drives during restore.
743 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
744 be used until after 2.2.0 release.
746 kes Remove fnmatch() in SD that permitted wild card specifications.
749 kes Fix %g in filename returned by SQL for browse tree reported by
751 kes Fix configure so that it puts config.out in the cwd rather than
753 kes Attempt to fix the locking problem reported by Eric in bug #906.
754 kes Make berrno class to leave errno unchanged after constructor call.
755 kes Make bnet_server use the heap rather than the stack to allocate
756 its socket fd pointers to avoid a crash at termination. Problem
757 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
759 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
760 and putting it in depkgs-qt along with Qt4.3.
762 kes Rework code in acquire.c that switches drives for reading when
763 the Media Type does not match. This should fix bug #906
765 ebl Fix a director segfault during job setup #907
766 kes Correct seg fault in postgresql when first operation returns no
767 rows. Fixes Dirks File browser problem seg fault with bat.
769 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
770 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
773 kes Implement PopUp YES/NO dialog for bat.
775 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
777 kes Correct RunScript to terminate job in FD on failure.
778 kes Change abort_on_error and AbortJobOnError to fail_on_error
779 and FailJobOnError in RunScripts.
780 kes Minor tweaks of code formating in RunScripts, principally to
781 avoid depassing 80 columns.
783 kes Eliminate one #ifdef Win32 in bsmtp
784 kes Implement grow tool to grow a file for testing very large databases.
785 kes Add big-vol-test to test Bacula seeking with > 5GB.
788 kes Modify find_next_volume() to return all values in Media record.
789 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
793 kes Update Release notes
795 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
796 Warning, in previous beta version, all media get from scratch keep their
799 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
800 This should fix bug #842. Made a note to look at removing the temp
801 files at the end of the install.
802 kes Add ability to mount and unmount a file device providing it is
803 marked as being removable and has the appropriate mount and unmount
804 commands defined in the Device resource. This fixes bug #830.
805 kes When applying a storage override, release all previous storage
806 definitions rather than just prepending the new storage.
807 This should prevent a good deal of confusion.
809 kes Implement ./configure search for qwt libraries.
811 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
812 Win32 FD. This should fix bug #893.
813 kes Remove an unnecessary beep in Win32 init code.
814 kes Update copyright dates in Win32 executable about boxes.
815 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
816 code with a BSD getopt.c and getopt.h.
817 kes Remove sched.h from the Win32 compat directory -- not used.
818 kes Remove the Exit menu item from the Win32 tray monitor. If you really
819 need to shut it down, do it through the services panel or the command
821 kes Remove some inappropriate Bacula FSFE copyrights.
822 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
823 kes Fix regress config non-portable test as pointed out by
824 Florian Heigl <florian.heigl@gmail.com>
825 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
826 as pointed out by Florian Heigl <florian.heigl@gmail.com>
828 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
829 Reported by Frank Sweetser.
833 kes Fix client-only build.
834 kes Integrate client-only fixes for bsys (initgroups) and conio from
835 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
836 kes Make arguments to get_scratch_volume() in same order as other
838 kes Rework the prune_volumes() subroutine so that after purging and
839 no volume found in desired pool, it will check for a scratch
840 volume. This prevents recycling the whole scratch pool.
841 kes Add code to status storage to print boffset_t (largefile support).
843 kes Move qwt (Graphics libarary for Qt4) to depkgs.
844 kes You now need a --with-qwt=<dir> to be able to build bat.
845 kes Update src/win32/cats/bacula_cats.def to include the new
846 db_get_query_dbids() call on Win32.
848 kes Correct a problem when selecting a scratch volume and moving
849 it to another pool that lost some columns.
850 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
851 kes Enhance Autochanger error messages to include Volume and device name.
852 kes Rework prune_volumes() code to take account of InChanger flag,
853 and to handle recycling volumes going to the Scratch pool and
854 current pool because the RecyclePool directive.
855 kes Implement a better and more efficient db_get_query_dbids() to
856 handle creating and passing back a list of DBIds.
860 kes Start work on new more efficient DBId subroutine. First use
861 will be for recycling volume to Scratch inchanger.
862 kes Increase number of JobIds in pruning from 1000 to 10000.
863 This to be replaced by above routine.
864 kes Begin implementation of building Qt4 on Win32.
865 kes Correct typo in fix I added for bad TLS shutdown.
866 kes Pull 2.0.3 patches into patches directory.
867 kes Update Release notes. Include qt-console in line count.
868 kes Update Projects file.
870 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
871 bug in migration code where a job that spanned two volumes
874 kes Implement new BST_DESPOOLING blocked state. Change from locking
875 during despooling in SD to blocking. This means that other threads
876 can work with the device structure, in particular the reservations
877 system while despooling.
879 kes Fix return in reservation message queue that missed clearing
880 the jcr lock (implemented 26Jun07 below).
881 kes Rename a number of dev methods to make locking function names
883 kes Document locking in lock.c. Move lock structures to new file
886 kes Move reservations message lock to lock jcr only this
888 kes Move main SD locking code into lock.c (new file).
889 kes Update Win32 build to include lock.c
893 kes Dirk committed the qwt library code for drawing graphs in bat.
894 kes Tweak install of qwt so that it is integrated with ./configure.
896 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
897 out by Eric (my typo).
898 ebl Fix configure.in to get batch mode enable
899 kes Return correct string from authenticate.cpp in bat when connecting
901 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
902 spurious line drops when using TLS.
903 kes Do not file reparse points when restoring a file that already
906 kes Implement Windows reparse points -- similar to directories, but
907 we do not descend into it. This is a first cut. They seem to
908 be backed up, but restore is not yet tested.
909 kes Remove restore_blocking in tls code when shutting a socket to leave
910 it in blocking mode. Hopefully this will fix the encryption bug
911 reported by Frank Sweetser.
912 kes When opening a file for backup, tell the OS that we are going to
913 read it sequentially -- optimization.
914 kes Change variable names in authenticate_director() to not conflict
915 with member names in bat. Caused great confusion with compiler,
918 kes Queue openssl error messages in case of comm problem.
919 kes Do shutdown() call if socket terminated.
920 kes Remove some duplicated code in tls.c
921 kes Move more of the bsock member variables into private and access
923 kes Add Frank Sweetser's tls-test to the regression suite.
925 kes Add Swedish sv.po file
927 kes Don't print clock skew message in FD if less than 3 seconds diff.
928 kes Add a bit of VSS info to status client.
929 kes Implement a first cut of Vista VSS, using Win2003 code.
933 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
934 loaded tape but uses first drive).
935 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
936 This was indeed a Win32 issue.
938 kes Simplify search of autochanger for in-use Volume.
939 kes Fix exit condition of check for in-use volume. kes Remove
940 inappropriate my_postgresql_free_result() in db_close()
942 kes Fix bad return in FD when encryption signature not found.
943 Probably caused a crash.
944 kes Inhibit missing encryption signature error messages for
945 file types where no signature computed.
946 kes Correct inverted check on autochanger in reservation system.
947 kes Tweak debug code in autochanger reservation.
949 kes Add some additional locking in the cats directory in subroutines
950 that modify packet variables called from batch insert.
951 kes Rework how dcrs are allocated. new_dcr() can now be called
952 with an existing pointer, and it will simply clean it up.
953 This allows the reservation system to test various different
954 devices, and will permit easy device changes.
955 kes A bunch of changes all over to handle new new_dcr() calling
957 kes Work more on the Volume management in the SD. Remember Volumes
958 for tape drives and for autochangers (even virtual disk changers).
959 kes When looking at the Volume list to reserve a drive, handle
960 autochanger names correctly by interating through the changer
961 devices. Also call the Director to see if a Volume is suitable
963 kes Fix some bugs in bscan. Make sure all media records are written.
964 Make sure that valid JobMedia records are written for disk files.
965 Previously they were completely wrong.
966 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
967 that the URLs don't change and so that the developers will all
968 work off the same copy. Rebuild from scrach.
969 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
973 kes Fix seg fault in FD from incorrect digest size.
974 kes Fix argument to non-OpenSSL crypto.c subroutine.
978 kes Remove a few malloc()s from the encryption code.
979 kes Use the class calls to bsock in filed/backup.c and restore.c in
980 place of the old bnet_xxx code.
981 kes Implement code that does an on the fly calculation of the
982 signing digest during restore of encrypted files. It makes
983 a best guess at the algorithm, and if it is not correct, will
984 then revert to the old code which reads the file after it is
986 kes Implement at least one missing crypto stream in stream_to_ascii()
987 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
988 #877 where a reload with bad syntax causes Dir to exit.
990 Cut: 2.1.14 beta (not released)
992 kes Do not free a volume on a tape drive until another volume is
993 mounted and read, or the autochanger unloads the volume.
994 This should help the SD re-use volumes that are already mounted,
995 and should fix bug #886.
996 kes Apply patch from user brettedgar that allows gnome2-console include
997 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
998 kes Apply patch from Lucien Weller that fixes day of week calculation
999 because of DST flag problem. Fixes bug #887.
1001 kes Move find_next_appendable_volume() to after acquiring a valid device
1002 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1004 kes Unable to reproduce bug 872. However added additional testing for
1006 kes Bug #874 resolved by documenting SQLite limitations.
1007 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1008 kes Bug #881 resolved by removing typo in mtx-changer script.
1009 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1010 approval. Added a link to the wiki on the web page, and implemented
1011 a backup from http://paramount.ind.wpi.edu
1013 kes Fix update allfrompool to pass pool name.
1015 kes Convert to pure GPL v2 license.
1016 kes Fix sscanf problems reported by Peter Buschman that caused
1017 a bus error on Solaris.
1018 kes Rework (simplify) the select prompt in bat.
1019 kes Move get_jobid_from_tid() into lib and create a
1021 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1022 should definitely fix the problem of lost error messages in the
1024 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1025 kes Eliminate tcpd.h from the project. Enclose the #include from the
1026 library with extern C ...
1027 kes Add print of signal name when a signal is trapped.
1029 Release: 2.1.12 beta
1031 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1033 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1034 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1035 makes SQLit3 run 30 times faster, though a bit less safe.
1036 kes Implement --with-batch-insert in configure and detection of thread
1037 safe libraries. It is on by default, but turned off if no thread
1038 safe library (e.g. SQLite 2) is available.
1040 kes Fix Bacula PostgreSQL buffer overruns.
1041 kes Do better checking for NULL results returned from PostgreSQL;
1042 implement retry for failed queries; clear results buffer after
1043 failed query. Hopefully this will correct the PostgreSQL failures.
1045 kes Implement algorithm to handle only one appendable volume with
1046 Prefer Mounted Volumes = no.
1047 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1048 returned from a query.
1049 kes Make volume lock recursive.
1050 kes Implement an additional volume reservation algorithm that
1051 starts by considering all reserved volumes then uses the
1052 old brute force algorithm of searching the resources to
1053 find a suitable device.
1054 kes Add new reservations debug code and refine the old code.
1055 kes Update the win32/dll/bacula.defs file.
1057 kes Tweak reservations algorithm to permit a few more cases, i.e.
1058 volume reserved, but on different drive, ...
1059 kes Enhance SD status to include Pool and Media Type for drive in a
1060 more readable format (a bit longer).
1061 kes Fix PostgreSQL double free.
1063 kes Minor refactoring of restore decryption code.
1064 kes Add code to smartall.c to detect double free of a buffer.
1066 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1067 so that bsmtp will create a correct email address (mailbox only).
1068 kes Modify 'memory' command so that the buffers are listed as 'In use'
1069 to avoid confusion with Orphaned buffers.
1070 kes I reworked the OpenSSL include/lib flags to be handled in
1071 the standard Bacula way, which should fix bug #863 concerning
1072 non-standard OpenSSL libraries.
1074 kes Implement Help Browser window for bat.
1075 kes Fix reload bug that reset StorageId to zero.
1077 kes Fix TLS #ifdefing when TLS turned off.
1078 kes Ensure that when labelling a tape with Slot=0 that InChanger
1080 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1082 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1083 add DISTINCT (required by PostgreSQL).
1084 kes Implement BSOCK authenticate_director() method. Eventually will
1085 authenicate all daemons.
1086 kes Move several more functions into the BSOCK class.
1088 kes Add code to tell the OS that we no longer need a cached
1089 file that we were reading. In findlib/bfile.c. Also,
1090 only cache files that we are reading. Thanks to
1091 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1092 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1093 kes Implement script to automatically generate cats and dll .def
1094 files for Win32 dll.
1095 kes Update README.mingw32 to include new .def file generation.
1096 kes Correct typo in UTF-8 error message as reported by:
1097 jhernandez <julianhernandez@gmail.com>
1098 kes Add additional sm_check() code on debug level 1.
1099 kes Set default debug level to 1.
1100 kes Trap SIGABRT in attempt to get traceback.
1102 kes Reduce bat connect timeout from 30 to 15 seconds.
1103 kes More restructuring and implementing BSOCK class in place of
1105 kes Remove a few unnecessary malloc() tests in crypto code.
1106 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1107 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1108 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1110 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1112 kes Fix Verify InitCatalog. The attributes were not pointing to the
1113 correct saved location.
1114 kes Implement message callback so that GUI is sure to get all
1115 daemon messages. Currently displayed in a dialog in bat.
1116 kes Ignore SIGUSR2 (Bacula timer) in bat.
1117 kes Apply regress patch from bug #859 to allow regress to work
1118 with Solaris compiler.
1120 kes Begin adding TLS support to bat.
1121 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1122 clean up lex.c and make it more readable.
1124 kes Move more bnet functions into the BSOCK class.
1125 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1126 kes Complete change of berrno strerror() method to bstrerror()
1128 Release: 2.1.10 beta
1130 kes Cleanup incorrect email addresses in bsmtp.
1131 kes Make bat display initial messages rather than discard them.
1133 kes First cut of adding .mod to the run command.
1134 kes Implement auto display of messages in bat.
1135 kes Enhanced preferences to allow all Bacula output to be
1138 kes Try to make bsmtp date routines more generic.
1139 kes Fixed bug #856 autochanger documentation.
1140 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1141 kes Add new cats entry point so Win32 builds.
1143 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1145 kes Do better checking for the MySQL 64 bit libraries looking for both
1146 .a and .so libraries.
1147 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1148 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1149 kes Require the thread safe version of MySQL during configure. Thanks
1150 to Andre Noll for pointing this out.
1151 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1152 continuing in migration code.
1153 kes Apply implementation of tray-monitor font derived from gnome-console
1154 submitted by Andreas Piesk <a.piesk@gmx.net>
1156 kes Eliminate important memory loss in SQLite
1157 kes Fixed the batch insert MySQL thread specific data that was not
1158 being freed. See cats/mysql.c:db_thread_cleanup().
1159 kes Fix restore before command.
1160 kes Convert old hdr.name to name() in a few places.
1161 kes Implement update jobid command.
1162 kes Return all time_t dates in db_get_job_record()
1163 kes Stop watchdog in SD earlier.
1164 kes Put Pool just after Storage in please mount message.
1165 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1168 kes Update the po files.
1169 kes Fix Verify InitCatalog by making it cache attributes.
1171 kes Change name bacula-bat to bat for man 1 page to correspond to
1173 kes Check for client and store NULL pointers in status command. This
1175 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1176 kes Fix sign extended editing of %p.
1177 kes Clean out a little old #ifdefing in cats/mysql.c
1179 kes If time diff between DIR and FD is more than 600 seconds convert
1180 INFO message to WARNING.
1181 kes Implement heap size display in status for all daemons.
1182 kes Attempt to fix MySQL db open memory loss (not successfull).
1183 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1184 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1185 Query. This looks like a MySQL but but by doing extra releases,
1186 the memory goes away. This should fix bug #847.
1188 kes When backup fails, cancel SD before waiting for sd termination.
1189 kes If SD is waiting for FD to connect during cancel, wake up the
1191 kes Fix fsf code so that errno is correctly reported.
1192 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1194 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1195 so that Bacula doesn't later stumble into a seg fault.
1196 kes Use the term Restore Client in the restore Job report.
1197 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1198 the original job's FileSetId.
1199 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1200 spooling in migration jobs. Not yet tested.
1201 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1202 reading conf file from a pipe. However, do it with open_bpipe()
1203 rather than popen. Not yet tested.
1205 kes Fix an ugly bug where the VolCatBytes were getting updated
1207 kes Implement bconsole memory command that prints current memory
1208 usage, plus smartalloc dump.
1209 kes Clarify some error messages in backup, admin, and migrate.
1210 kes Shrink label dialog to smaller size.
1211 kes Invert Cancel OK buttons on restore to be OK Cancel.
1212 kes More strerror() to bstrerror() conversions.
1214 kes Start implementing bstrerror() in place of strerror().
1215 kes Stripping path -- seems to work.
1217 kes Prevent door and port files from being restored (mostly
1219 kes Free an unreleased buffer in compat code.
1220 kes Change console Job name from *Console* to -Console- to eliminate
1221 Win32 filename problems. Put Win32 path separator when creating
1222 Console file. This fixes bug #846.
1223 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1225 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1227 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1228 to force Win32 error message.
1230 kes First cut strip path. The data should be passed to the FD,
1231 but nothing is done with it yet.
1232 kes Enhance the digest and signature routines in the crypto
1233 library to accept a JCR and to use it to print error messages
1234 so that they will go in the Job report rather than the daemon's
1236 kes Simplify some of the verify signature code.
1237 kes Simplify a few of the alternative returns in the signature
1240 ebl Use only POSIX regex instead of GNU regex in breg.c for
1241 File relocation. It fix broken freebsd compilation.
1242 kes Convert all other Dir files to use new ua class message
1244 kes Tentative fix for missing digest signature in bug 807.
1245 kes Correct handle problem in new win32_ftruncate routine.
1246 kes Convert ua_purge.c and ua_update.c to use new ua class
1247 message routines for bat.
1249 kes Correct incorrect installation of LICENSE in Win32 installer.
1250 kes Display LICENSE at the beginning of the Win32 install.
1251 kes Attempt to correct the need for the png files to be installed
1253 kes Reapply my bat.conf install script in qt-console. I think I
1254 editted bat.pro instead of bat.pro.in and it was lost.
1255 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1256 the /var/lock/subsys for subsysdir. Also corrects typos in the
1259 kes First cut update job.
1260 kes Correct configure to include qmake of src/qt-console directory.
1262 kes Make restore job yes/mod/no print in one command so GUI works.
1263 kes First cut implementing backup and restore client.
1264 kes Correct editing in Verify output that caused a seg fault.
1266 kes Insure that bat.conf is not overwritten during installation.
1267 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1268 while I was implementing migration in March 2006 !
1270 ebl Cleanup file relocation, using char *RegexWhere instead of
1271 char *where + bool where_use_regexp
1272 kes Update some manpages and add bat manpage.
1273 kes Make a first cut at converting bacula.spec.in for bwx-console
1275 kes Apply patch from John Goerzen to add hostname as fourth argument
1276 to make_catalog_backup script.
1277 kes Fix typos I introduced into bsmtp.c
1278 kes Make pm_strxxx() routines handle input of NULL pointer. This
1279 is to protect from NULL pointers returned from SQL databases.
1280 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1281 kes Add more debug to FIFO code -- fix fifo regression test.
1283 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1284 kes Add thread timer to bnet_connect() to break from OS if wait time
1287 kes Update Win32 build to include new files, new symbols, and
1289 kes Implement socket level heartbeat (tcp_keepidle)
1290 ebl Commit File relocation patch
1291 kes Make bat have 'make install' target.
1292 kes Warn during install if old gnome-console binary found.
1293 kes Warn during install if old wx-console binary found.
1294 kes Add -8 option to bsmtp command line to add content type utf-8.
1295 Fixes bug #809. (Character coding problem in bsmtp).
1296 kes If < is found in target (from, to, cc) then do not enclose the
1297 target in < > in bsmtp. Fixes bug #772 (malformed address).
1298 kes When printing certain items in dbcheck, stop after 300000.
1299 Fixes bug #822. (dbcheck loops).
1300 kes Incorrect status in Dir after waiting for mount with poll set.
1303 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1305 kes Print waiting to reserve a device every 5 mins.
1307 kes Don't call close_part in label.c if tape and relabel.
1308 kes Don't free volume if busy in close() -- should help with
1310 ebl Fix #824 RunScript bug (After script could be execute twice)
1311 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1312 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1313 Add a regression script to test RunScript
1315 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1318 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1319 deprecated. No additional bugs will be fixed, and they will be dropped
1320 in a future release (probably 2.4.0).
1321 kes Change name of wx-console to bwx-console to make it more Bacula
1323 kes Change the name of gnome-console to bgnome-console to make it
1326 kes Some time in March, a Feature Request with patch from Jorj Bauer
1327 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1329 The ability for the director to validate a Client (FD) CN against
1330 an arbitrary set of patterns rather than the hostname, with
1331 A new 'TLS Allowed CN' set of directives which are implemented
1332 in the Client resource. Then pattern matching is used in place
1333 of hostname matching against the Certificate's CN. As an example, we
1334 have certificates which (a) use a local CA, and (b) have a CN of the
1336 kes Add new/changed entry points to Win32 build
1337 kes Create unaccepted-projects for projects that are not accepted.
1338 kes Simplify locking in the reservations system.
1339 kes Add more debug code in reservations.
1340 kes Make sure error condition on reserving a volume is handled correctly.
1341 kes Correct handling of volume_in_use.
1342 kes Correct handling of initializing a device.
1343 kes Move handling of broadcasting releasing a device into release_device().
1344 kes Correct attaching dcr to dev so that it is only done if device
1345 is properly initiated.
1347 kes Locking debug level tweaks in SD.
1348 kes Tweak new Volume code.
1350 kes Add exec external-command [wait-seconds] to bconsole. This
1351 executes the external-command. Note! normally external-command
1352 should be enclosed in double quotes.
1353 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1354 it should normally be off in a production system.
1356 kes Implement die command for SD so that we can force it to dump.
1357 kes Implement SD lock debug code.
1358 kes Implement new algorithm for keeping Volume list in SD. It
1359 is now owned by the device.
1361 kes Implement new code for freeing in use volumes that should
1362 resolve if not all, some of the problems of multiple drive
1363 tape conflicts described in bug 801.
1365 kes Fix gui/bacula-web/images files in svn.
1366 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1368 ebl Fix a bug in batch mode (in string escape)
1369 kes Correct migration prune SQL typo that crept in in a
1370 recent 2.1.x change.
1372 kes Move bnet_despool() into class in bsock.c
1373 kes Modify job report to include director name and Build OS.
1374 kes Move drop root privilege and check_catalog() before fork.
1375 kes Add update database scripts (version 9 to 10) to updatedb directory.
1377 ebl Check size and age of each file after its backup to see if
1378 it has changed during backup, if 'checkfilechanges' is set.
1379 The FD will do an extra check (stat(2)) after
1380 each file backup. mtime, ctime and size are compared with
1381 'before backup' information. If time or size mismatch, an
1382 error message will be generated. You must upgrade FD to use it.
1384 kes Make database name and user configurable
1385 --with-db-name=xxx --with-db-user=xxx
1386 kes Add back database type to message.c for debugging.
1388 kes Implement dir_sql() which issues an SQL query.
1389 kes Modify bat medialist to use dir_sql() and do some minor C++
1390 formatting as well as eliminating a number of pointers, simplifing
1393 kes Fix some of the mtx-changer grep commands for tape label readers.
1394 kes Convert a number of bsendmsg into the appropriate send/warning/error
1395 message class calls.
1396 kes Suppress the using database message in the .sql command.
1397 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1399 kes Add context menu for floating a window.
1400 kes Some minor cleanup and name changes in qt-console
1401 kes Add doing mt setblk 0 in Win32 mtx-changer.
1402 kes Apply Martin's bug fix to move definition of ENODATA for
1404 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1405 sqlite2 and sqlite3.
1407 kes More pruning cleanup.
1408 kes Turn on wait_for_drive by default in mtx-changer.
1409 kes Turn on Batch insert code by default as it now passes regression.
1410 kes Add ./configure --enable-bat to enable building of Bat.
1411 No install yet though.
1413 kes Implement a new .sql command for bat.
1414 kes Implement code to turn off pruning in obtaining the next volume.
1415 Pruning is turned off for the status dir command, but turned on
1416 for SD requests and for the list nextvolume command.
1418 kes Correct Qmsg() that was not updated correctly when committing a
1419 previous change (probably the recent TLS patch).
1421 kes Write new subroutine is_volume_purged() that explicitly checks
1422 if the Volume is purged, and if so marks it as such. This should
1423 resolve problems reported about needing to mount twice to recycle
1425 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1426 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1427 amount of duplicated code.
1428 kes Do volume pruning only for the Media Type desired (reduces pruning time
1429 if multiple Media Types are in the same pool).
1430 kes Implement more detailed info in the Job report for the Bacula version
1432 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1434 ebl Add bbatch tool to bench database and insert mode.
1435 Fix sql quote stuff in batch mode
1436 Fix sql stuff for mysql
1438 kes Correct problems with am/pm scheduling. Fixes bug #808.
1439 kes Implement new prunning code that prunes up to 1000 jobs at
1440 the same time. The same technique can be applied to a number
1441 of other prune/purge subroutines.
1442 kes Add an insanity check when starting a new tape job to ensure
1443 that the tape position has not been changed. If so fail the
1445 kes Fix Win32 build for dlls to add the folllowing:
1446 src/lib/bsock.c -- new file with new entry points
1447 src/lib/dlist.c -- new entry points
1448 src/cats/sql_create.c -- new entry point
1449 src/cats/sql_cmds.c -- new DATA item exported
1451 ebl batch mode cleanup bscan-test is ok now.
1452 kes Implement SD code to check length of disk volume before appending.
1454 kes Correct return status on db_batch... routines.
1455 kes Add call to db_write_batch_file_records() to migration code.
1456 ebl Fix AfterJob timing
1457 kes Move the checking of the database in initializion of the Director
1458 to after we drop privileges. This avoids the need for both root
1459 and bacula access to the DB.
1460 kes Correct a misplaced variable definition in src/filed/backup.c
1461 kes Correct how the new batch insert db_create_attributes_record()
1462 uses the arguments. Caused a seg fault in bscan.
1463 kes Implement lock() and unlock() methods in DEVICE class.
1464 Implement block() and set_block(xx) methods in DEVICE class.
1465 kes Modify bnet_connect() so that it uses time() to check for the
1466 wait time expiring (on some OSes, some system calls may not
1467 return immediately).
1468 kes Modify Verify to obtain the previous JobId when it is actually
1469 running rather than at schedule time (as it was in 1.38.x).
1470 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1472 kes When checking pid in pid file, continue running if the pid is
1473 the same as ours. This occurs on IRIX after a system crash.
1476 kes Extend new GUI API.
1477 kes Make the ua structure a class, and implement send_msg(),
1478 error_msg(), warning_msg(), and info_msg().
1480 kes Apply fix from for building wx-console on the Mac from
1482 kes Implement new select mechanism for GUI programs.
1483 kes Reorganize initialization of stackedWidgets in bat.
1485 kes Add updated nagios plugin supplied by Christian Masopust.
1487 kes More bat implementation.
1488 kes File migrate bug with Pool Occupancy using mediaid instead
1489 of jobids. Fixes bug #795.
1490 kes Fix orphaned buffers in filed backup and verify due to
1491 crypto buffers not freed during errors. Fixes bug #789.
1492 kes Extend new GUI api code to tree commands.
1493 kes Ensure that tree and dot commands check console ACLs.
1494 kes Permit marking directory with trailing slash.
1495 kes Allow 20 console connections (instead of only 10).
1497 kes Add smartctl call to bacula-sd.conf as an example of getting
1500 kes Modify jobq.c to let simultaneous restore jobs run. This may
1501 cause them to fail if they cannot get a drive.
1502 kes Add Client Connect Wait to Storage daemon to permit users to
1503 modify the time the SD waits for a FD connection.
1505 kes Correct virtual changer check which was backwards. This caused
1506 volumes to be unloaded into slots already occupied.
1508 kes Apply Command ACL filter to JobId list in restore command.
1509 kes Correct typeo in var.c patch.
1511 kes Don't let Bacula prune File or Job records for the current Job.
1512 kes Fix variable substitution pad + inc bug reported (with patch)
1515 kes Correct SQLite log table index as reported by Luca Berra.
1517 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1519 kes Begin implementing new comm signals for API.
1520 kes Fix a few places in lib/message.c where the open fd may
1522 kes Continue implementing lib/bsock.c (real class). Make jcr,
1523 who, host, and port private. There are new methods to access
1524 them for non-class use. This required touching a number of files.
1526 kes Add LANG=C to autoconf/randpass so it works with languages other
1527 than English. Fixes bug #788.
1529 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1531 You will not be able to generate Include/Exclude list any more.
1532 It will be fixed soon.
1533 If you want to use this, you can apply
1534 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1536 kes Restore of sockets created false error messages because Bacula
1537 no longer restores sockets, but the code was still trying to
1538 set the attributes on a non-existent file. Reported by a user.
1539 ebl finish RecyclePool feature
1540 Media will takes Pool.RecyclePool
1541 when moving from Scratch to a Pool or when user will do
1542 update volume=xxx frompool
1543 To use it, add RecyclePool = aPool to your Pool resource
1546 RecyclePool = Scratch
1550 kes Expand new BSOCK class adding signal() and new BNET signals.
1551 kes Begin enhancing the dot commands adding a new API function
1552 that returns more information and will make it easier
1553 to interface to the Director from a program.
1555 kes Make DEVICE fd private. Its new name is m_fd, and can be
1556 obtained with dev->fd() outside the class. This is the
1557 first of many DEVICE members to be made private.
1558 kes Implement Michael Renner's idea on having a virtual disk
1559 changer. I made some minor modifications (e.g. I did not
1560 implement the Virtual Changer directive, but simply set
1561 the Changer Command to an empty string.
1563 kes Implement a BSOCK send() method that writes the whole record
1564 in a single write() request rather than in two.
1565 ebl add update volume=xxx recyclepool=yyyy
1566 volume takes recyclepool from pool when using update volume=xxx from pool
1568 kes Fix encryption deblocking bug, which caused some restored files
1569 to be truncated. This fixes bug #763.
1570 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1571 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1573 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1574 ebl Use btime_t instead of uint64_t in media patch.
1576 kes Optimize the use of the database a bit in the Status dir command.
1577 Only open it when needed, ensure that if any previous database
1578 was opened, it is closed.
1580 kes Correct VolCatBytes bug from media patch.
1581 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1582 in the case of orphaned records.
1583 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1584 and File records in 300K chunks to be more efficient. This
1585 idea came from Juan Luis Frances (if I remember right).
1586 kes Apply Eric's scratch patch that moves a purged Volume to
1587 the RecyclePool. Question: how is RecyclePool set? what
1588 happens to the ScratchPool?
1589 kes Apply Eric's media patch that collects read/write media
1590 times as well as byte counts. This patch requires a
1591 simultaneous upgrade of the DIR and SD. Note, there
1592 should be some way to turn off timing. I'm not sure
1593 times are in Bacula units.
1594 kes Apply Eric's batch-insert patch.
1596 kes Update projects list.
1598 kes Implement Include/Exclude file lists in FD as dlists using
1599 the new dlistString class. This permits efficiently having
1600 large include/exclude lists and completes project Item 25.
1601 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1602 console is authorized to cancel the job. This fixes bug
1604 kes Modify SD so that the VolCatJobs medium record is updated
1605 at the beginning of a Job rather than the end. This
1606 fixes bug #775 where exceeding MaxVolJobs caused jobs
1608 kes Added a mutex around getting and setting Volume information
1609 so that multiple simultaneous jobs will single thread.
1611 Switch to using Subversion
1612 kes Remove src/pygtk-console/ from configure
1614 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1615 plus the entrypoints.
1616 kes Apply patch supplied that corrects debug print
1617 in canceling jobs for max run time. Supplied as
1618 part of bug #621, which was previously fixed.
1620 kes Test on job_canceled() and sd_msg_thread_done inside
1621 loop starting the message thread to avoid a race condition.
1623 kes Remove rl_catch_signal from console.c as it conflicted
1624 with the header definition. Fixes bug #765.
1625 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1627 kes Clarify some stored/acquire messages to indicate if the
1628 problem is with read or append.
1630 kes Fix memory leak with storage ids in cats/sql_get.c
1631 kes Terminate watchdog earlier to avoid reference to released
1632 memory -- reported by Jason Austin.
1633 kes Move closing the database from jobq.c to the director daemon
1634 termination routine. This fixes memory leaks for shadow jobs
1635 (i.e. migration jobs).
1636 kes Free up the unique jobid chain items in migrate.c. This fixes
1637 a memory leak problem.
1638 kes Convert some ugly looking for statements to use foreach_alist
1639 in findlib/find.c. This will facilitate converting the structures
1640 to use dlist (for large include/exclude lists).
1641 kes Fix a bug in the btree.c and btree.h routines, then rename them
1642 rblist and add them to be built in src/lib. Include some new
1643 methods written by Rudolf Cejka that make the code more readable
1644 (hides some of the ugly casting).
1645 kes Add set_next() and set_prev() methods which make the code much more
1646 readable. Also add a new dlistString class that facilitates storing
1647 strings in dlists. To be used in the large include/exclude lists.
1648 kes Make some trivial modifications to lib/tree.h that use rblist
1649 rather than dlist for storing the tree links. This was suggested
1650 by Rudolf Cejka. The result of this is that the restore tree now
1651 uses red-black binary trees rather than simple linked lists. This
1652 should give rather dramatic speed improvements for directories
1653 contining large numbers of directories/files (more than 10000).
1655 kes Fix maxruntime bug #621.
1657 ebl Implement the include JobID in spool file name project.
1658 kes Reorder projects file in order determined by Jan 2007 vote.
1659 kes Implement item #12 on project list -- quick release of FD by
1661 kes Fix open of SQLite3 db where user does not have write permission
1662 so that DIR does not crash. Fixes bug #761.
1664 kes Add back missing @ in Win32 Makefile.
1665 kes Change 'Device not configured to autolabel' from INFO
1667 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1668 which should restart an indefinite # of times.
1669 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1670 other DIR specifications.
1672 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1673 Fix path quoting in SQLite scripts.
1674 Fix problems with SHGetFolderPath.
1676 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1678 kes Fix Job restart on error bug that promotes an Inc to a Full
1679 backup. This should fix bug #755.
1680 kes Add qt-console and first cut of code.
1684 kes Fix Bacula->Documentation link on Win32 to point to index.html
1685 instead of bacula.html. Fixed bug #750.
1686 kes Return JobId in db_get_job_record() when JobId==0. This should
1688 kes Do not release source pointers when restarting a failed job.
1690 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1691 This *should* fix bug #747.
1692 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1695 kes Modify USTORE constructor to set an empty store_source string,
1696 and don't copy the store_source string in a cancel. Hopefully
1697 this will fix Arno's seg fault, bug #744.
1698 kes Add back code to disable conio in configure. Fixes bug #743.
1699 kes Correct the Options scanner in the FD to correctly handle
1700 SHA1 option, which was eating the next option. Reported by
1702 kes Add code to indicate when the SD is spooling, spool wait, and
1703 despooling as requested by Alan Brown.
1705 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob