1 Technical notes on version 2.4
7 kes Clear in-use bit on vol when unused while swapping.
9 kes Remove sleep at end of ./bacula
10 kes Clear hash packet for hardlinked files correctly. This corrects
11 a long standing bug where hardlinked files selected individually
12 would occasionally not be restored.
14 kes Apply Eric's patch to ensure that autoprune does not return
15 a Volume not in the autochanger unless requested to do so.
16 kes Correct bat restore display of multiple drives. This fixes
18 kes Do find_a_volume() each time an unload is done. This
19 fixes the failure of maxvol2-test.
21 Release Beta version 2.4.1-b2
23 kes Use Qmsg() in job.c watchdog callback.
25 kes Release main control rwlock if ABORTing.
26 kes Make watchdog connect timeout queue messages rather than sending
27 directly to avoid lock conflicts with the real thread.
28 kes Remove const char that causes problems with Python, which has
29 older 'incorrect' headers.
30 kes Add const char in dbd.c to avoid compiler warnings.
32 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
33 mt. This fixes bug #1116.
34 kes Fix failure of 2drive-concurrent-test. Always read label;
35 clear_unload() only after drive is defined in acquire_for_read().
37 Release Beta version 2.4.1-b1
39 kes Back out bad src/lib/base64.c change.
41 kes Generally clean up the manual tape loading code. The main
42 conceptial change is that when a volume is marked to be unloaded,
43 its volume name is retained, and it is only marked as unloaded
44 when either the autoloader says it is unloaded or another tape
45 is read on that drive.
47 kes Fix a recycling problem with two autochangers reported in bug
48 #1106. This may also (unlikely) fix a second recycling bug as
50 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
52 kes Fix format problem in bscan output reported in bug #1105.
54 kes Copy more data when restarting a job so that run
55 overrides are kept. This should fix bug #1094.
56 kes Backport updates to jobq.c where possible.
58 kes Fix bug where SD did not ask operator if the device could not
59 be opened. Reported by Eric.
61 kes Add dbuser to DIR conf file (replaces user).
62 kes Add --with-db-password to ./configure
63 kes Fix regress to handle db_password.
64 kes Fix a couple of pedantic compiler warnings.
65 ebl Fix bug when starting a restore on a storage that doesn't
66 have the requested MediaType.
68 kes More work on word alignments -- eliminate all ints from
69 the configuration routines.
71 kes Fix bug reported by Scott Barninger where the bacula script
72 refers to scripts in the wrong directory. Needed to meet the
73 requirements of recent FHS location changes.
74 kes Fix word alignment problem on non-Intel 64 bit machines
75 such as Solaris. This should fix bug #1097 -- bus error in SD.
77 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
81 kes Update version to reflect the magnitude of the SD changes.
83 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
86 kes Add create_postgresql_database.sql to Win32 installer. Should
87 fix problem reported by Juilio Monteiro.
88 kes Get correct slot when auto unloading a device. This fixes bug
91 kes Fix multiple media restore.
92 kes Make DEVICE Slot private and access it via a method.
93 Allows better control over when it is set and cleared.
94 kes Fix possible seg fault if SQL error.
96 kes Add debug code to SD.
97 kes Fix renaming a Volume, which used the wrong Volume name.
99 kes If operator has rewind tape, print warning, release tape and
100 try once more. If tape is positioned somewhere, something went
101 wrong, so mark the tape in error and try once more. Previously
102 this error was fatal, now it produces an error message.
103 kes Ensure correct volume name displayed during restore
104 kes Ensure that Volume is mounted for restore.
106 kes Fix a few more Coverity reported problems.
108 Beta Release Version 2.2.10-b4
110 kes Enhance a couple of SD debug messages.
111 kes Tweak unload flag setting and ensure it is set during swap.
113 ebl Fix #1091 about bad output in estimate command.
115 kes Modify autochanger locking to attempt to avoid race
117 kes Make sure device not busy before doing label command.
118 kes Display open() errors except when polling. Previously too
119 many were suppressed. This should fix bug #1070.
120 kes Fix Win32 reparse points. Bacula will not recurse into any
121 reparse point directory, including mount points, unless the
122 directory is explicitly mentioned at the top level (same as
123 with Unix). A file that is linked to another file will be
124 backed up -- much as Unix does for hardlinked files.
125 This fixes bug #1041.
127 kes Remove double quotes from ChangeLog and ReleaseNotes
128 kes Remove StorageId test when pruning and recycling (Eric's changes).
129 kes Remove old form of locking when getting volumes -- causes deadlock.
131 kes Fix buffer overruns detected by Coverity.
133 Beta Release Version 2.2.10-b3
135 kes Tweak joblog display.
137 kes Implement --without-qwt
138 kes Fix layout of restore tree dialog
139 kes Add configure bat QWT libraries, so that bat can be built
140 with or without the QWT libaries.
142 kes Apply batfix bat cleanup patch from Riccardo.
143 kes Make sure we unload the right slot when swapping.
145 kes Improve SD reserve debug code.
146 kes Testing an improvement to free up volumes no longer in use.
148 Beta Release Version 2.2.10-b2
151 kes Rework SD acquire for read to handle autochanger Volume
153 kes Implement regression that explicitly tests swapping a Volume
154 from one drive to another.
155 kes Enhance disk-changer to detect most error conditions.
156 kes Fix SD code so that it properly swaps a Volume between drives.
157 This fixes bug #1083.
159 kes Prevent a Volume that is being swapped from being freed from
160 the volume list. This will most likely fix, at least partially,
162 kes Fix strippath so that it does not get a buffer overrun and crash FD.
163 This fixes bug #1078.
164 kes Make inability to change owner/group when creating a dir only a
165 warning rather than an error.
167 ebl Fix SQL query in migration code
169 kes Force unload of volume when wrong volume mounted in SD.
171 kes Fix bat seg fault at termination.
172 kes Add Bacula generated version to bat about box.
174 Beta Release Version 2.2.10-b1
176 kes Permit multiple simultaneous restores -- experiment.
178 kes Backport development stream SD reservation system changes.
181 kes Move final volume swapping code to DCR method and
182 call it from acquire_for_read().
183 kes When wrong volume is mounted during read, unload_autochanger.
185 kes Stop searching for Volumes in SD askdir if DIR returns the
186 same volume name twice in a row.
188 kes Tweak the swap Volume from one drive to another code so that
189 it now seems to work.
190 kes Resolve several problems with recycling that broke the new
191 code (these problems are in 2.2.9 as well).
192 kes Remove the volume lock when calling the sysop code.
193 kes Don't mark a reserved volume with no writers as unused otherwise
196 kes Rework class structures for VOLRES, DCR, and DEVICE to make
197 the method names a bit more logical, and for more logically
198 handling the responsibilities.
200 kes Remove redundant code in terminating the scheduler that just
201 causes a seg fault in many cases.
202 kes Cleanup releasing a volume and make it a DCR method.
203 kes Improve algorithm for detecting pre-reserved volume and
206 kes Tweak volume swapping code so it works.
207 kes Correct name overloading in mount.c
208 kes Replace released flag in VOLRES with reserved and add access
209 methods for the VOLRES class.
210 kes Prevent volume from being released while being swapped.
211 kes Refactor parts of stored/mount.c
213 ebl Add sanity checks for VolWriteTime and VolReadTime
214 ebl Take care of bad clock changes while computing VolWriteTime
215 and VolReadTime. This should fix or limit #1066
216 kes Correct error string numbers in dird/catreq.c
217 kes Restructure reserving, acquiring, and mounting volumes. Calls to
218 autochanger are deferred for mount.c -- simplifes the code.
220 kes Do not prune any running job. It just fails the job.
221 kes Lock the volumes when changing dev->reserved_device and marking
222 the volume unused otherwise the device can get reserved by
223 another job before the volume is released, thus blocking it.
226 Beta Release Version 2.2.9-b7
228 kes Close bat console windows first to eliminate error message
230 kes Remove useless code in Scheduler that causes seg fault on
232 kes Correct some SD catalog request error messages.
233 kes Don't allow pruning of any running job.
234 kes Turn off code in read_record that causes a seg fault in the SD
235 when reading past an EOS_LABEL.
236 kes Turn off unloading the autochanger in reserve.c as it just
238 kes Lock volumes when unreserving a device.
239 kes Do not mark volume unused when recycling.
240 kes When acquiring, don't mark volume unused if it is reserved (busy).
242 Beta Release Version 2.2.9-b6
244 kes Eliminate ./configure warning on po directory
245 kes Fix bug #1063, reuse of freed ptr in list nextvol.
246 kes Release regex compile buffer in filed/job.c
247 kes Add proper type of const char in sql_create.c
248 kes Turn off debug in daemon termination routines
249 kes Move free_volume_list() before devices are freed in stored.c
250 kes Fix reference to uninitalized stack variables in bregex.c.
251 This should correct bug #1067.
253 kes Fix possible seg fault in SD when freeing a volume entry.
255 kes Apply patch from bug #1069 that corrects spurious error messages
256 when ACLs enabled on SGI but no ACL exists.
257 ebl Fix a storage deamon segfault at debug level 500.
259 Beta Release Version 2.2.9-b5 -- not released
261 Beta Release Version 2.2.9-b4
263 kes Re-enable code to remember last volume mounted on a non-tape
265 kes Add patch supplied in bug #1068 that fixes a SD crash when using
266 a Virtual autochanger.
267 kes Generate correct JobMedia records during spooling/despooling when
268 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
269 <tih@hamartun.priv.no> for excellent analysis and testing.
271 Beta release Version 2.2.9-b3
273 kes Rework certain SD locking based on gdb tracebacks of deadlocks
274 sent by Eric. This code now uses only the volume_lock() rather
275 than the reservations lock when at EOM and acquiring a new
277 kes Ensure only one exit point in several subroutines.
279 Beta release version 2.2.9-b2
281 kes Fix to initial tape drive open to release the volume name
283 Beta release Version 2.2.9-b1
285 kes Fix to JobMedia fix.
286 kes Fix bug pointed out by Peter Much that causes the StorageId to
287 be updated when reading a tape (during migration, it could have
288 been incorrectly set to the write StorageId).
290 kes Implement autostart scripts for Debian
292 kes Fix mtx-changer.in for broken Debian mt program.
294 kes Massive commit of all fixes and back ports to create 2.2.9
296 kes Apply doc fix from bug #1062.
297 kes Resolve crash and improper restore wx-console Win32 restore
298 GUI. Fixes bug #1065.
299 kes Update Win32 wxWidgets to latest version.
300 kes Attempt to do correct handling of Win32 mount points. Should
302 kes Fix Win32 FD backup/restore memory leak due to improper termination
303 of BackupRead/Write. This fixes bug# 1038.
304 kes Add const to AIX prototype for initgroups()
306 kes Undo bug #1047 heap overrun fix as it is not correct.
308 kes Fix creating first JobMedia record during Migration to include
309 proper index. This caused slow restores of migrated jobs.
311 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
312 and do not strip paths on symbolic links.
313 kes Set catalog backup database and user name from values specified on
314 the ./configure line.
315 ebl Apply patch to correct bug #1031, about wrong pool source information
318 Release Version 2.2.8
320 kes Apply patch from Martin to correct bug #1040, bscan sets existing
322 kes Fixed important spelling error in doc -- bug #1045.
324 kes Move initialization of read/write res lock earlier in the code.
325 This fixes the crash with a null conf file. This fixes bug
327 kes Redefine CURES in lib/parse_conf to be URES and move it all
328 into lib/parse_conf.c -- this responds to bug #1042, but does
329 not fix it. The fix is not to compile with FORTIFY_SOURCE.
330 kes Backport fix de-referencing a NULL pointer in the scanner from
331 the trunk SVN. I don't think this was reported as a bug.
333 Beta release Version 2.2.8
335 kes Re-enable the new job code editing (%f).
337 kes Fix bsnprintf for float point numbers. I broke recently when
338 parameterizing some variables. This fixes bug #1036.
340 kes Move Heartbeat documentation from Job to Director resource.
341 This fixes bug #1033.
343 kes Fix existing switch drive SD code to call autochanger to release
344 any old volume. This must be done to keep the autochanger from
345 releasing subsequently newly reserved volumes in doing a close().
346 This should possibly fix bugs #1032 and #1018.
347 kes Apply big backport of current SVN SD code that corrects a number
348 of race conditions. This is a first step in fixing bug #1018.
350 ebl Fixes bug #1028 where "Selection Type" option was not usable
354 Release Version 2.2.7
356 kes Partial back out (disabled) %f job code editing because it
357 does not build on Win32.
358 kes Fix seg fault Frank Sweetser reports in regression testing
359 on his systems. The problem was that the original author of
360 bsnprintf.c did not take into account the side effects of
361 using ++x in the argument to a #define.
363 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
364 that implements double quoting include names in conf files,
365 and also allows piping input by having the first character
366 be a vertical bar (|).
367 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
368 that implement %f in RunScripts to pass the FileSet name.
369 kes Skip leading | when lex input comes from a pipe as suggested
370 by Michael Stapelberg <michael@stapelberg.de>.
372 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
373 Nerijus Baliunas <nerijus@users.sourceforge.net>
375 kes This patch corrects a problem where the maximum concurrent storage
376 jobs counter gets out of sync during restore jobs causing jobs to
377 'wait on max Storage jobs'. This patch fixes bug #1009.
379 kes Add new include to postgresql.c suggested by Marc Cousins so
380 that it compiles correctly with pgre version 8.3. Also fix
381 misuse of %x with pointer (should be %p).
383 kes This patch fixes bcopy so that it produces correct Volumes.
385 kes This patch eliminates spurious output to the console during a VerifyVolume
386 job that contains encrypted data. It fixes bug #1024.
388 kes This patch prevents the 'status dir' command from trying to use a scratch
389 volume and possibly moving it from one pool to another. This patch fixes
392 kes Fix --archivedir addition to configure. Replace it with
393 --with-archivedir in configure.in This fixes the regression
395 kes This patch fixes bug #1012 where the job is canceled because
396 of Max Run Time exceeded when the job has not yet started.
398 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
399 one 'part' to write. Instead of each part being stored on disk,
400 written to DVD, then deleted from disk, all parts are written to disk,
401 and only the last is written and deleted from disk.
403 kes Correct typos in disk-changer.in
405 kes This patch fixes the status command to include the formating string for
406 JS_AttrInserting. It fixes bug #1021.
407 kes This patch should fix the Mac OS X build problem on the latest
408 Darwin, where sys/types.h was not included correctly (apparently
409 due to a change in the Mac headers). The solution was to explicitly
410 ensure that it is defined for the ./configure.
411 This patch also has a rebuild of configure that includes the Debian
412 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
413 kes This patch should ensure that queued messages to the console are
414 displayed as soon as possible. It should fix bug #1007, but has been
415 reported not to work.
417 kes This patch fixes the infinite loop when trying to increase the
418 maximum number of volumes in a Pool during the add command.
419 This patch fixes bug #1008.
421 Release Version 2.2.6
423 kes Get fix for joblist bug in bat from trunk.
425 kes This patch fixes bug #1003 where putting the message output from
426 a Verify job into the catalog results in a recursive loop. The problem
427 seems to show up only with postgresql (to be verified).
429 kes Fix bug #942 where lots of emails where generated when the heartbeat
430 interval was low and Bacula wanted a different tape from the one in
433 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
434 which was updated during a restore (or a reading migration) bug #982
436 ebl Use qmake-qt4 instead of qmake when available (debian system).
438 kes Add a security warning to src/cats/make_catalog_backup.in indicating
439 that passing the password via the command line (arg 3) is insecure.
440 This responds to bug #990 (it doesn't fix it).
441 kes Apply 2.2.5-postgresql-errors.patch
442 kes Remove unneeded File table index on JobId, which is already
443 present as the first index of another multi-index.
445 kes Set default debug_level to zero. This corrects bugs #991 and #993.
446 kes Fix a crash in bat when it cannot connect to the Director for example
447 if the Director is not running.
449 kes Activate Close button on tray-monitor window. This fixes
452 kes Fix spurious warning message printed when creating a volume with
453 a LabelFormat. This fixes bug #976.
455 Release Version 2.2.5
457 kes Add JobId in place of Job name in all the Jmsg() output.
458 kes Correct the APP_DESC for the Win32 storage service (remove an e).
460 kes Add new SD despooling attributes and Dir inserting attributes
461 job status codes. This fixes bug #961.
462 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
464 kes Fix doc issue. This fixes bug #963.
465 kes Fix listing performance problems in bat. Pointed out by
467 ebl Fix replace on restore. This fixes bug #969
468 kes Fix bat code that tests for Win32. This should fix bug #968
469 kes Query 5 list wrong Vol after migration. This fixes bug #960
471 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
472 in back porting from 2.3.x
474 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
475 The details are included in the notes in this file.
477 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
478 messages; it fixes a problem opening the SQLite3 database when multiple
479 simultaneous jobs were running; it fixes a bug with certain versions of
480 MySQL where batch inserts failed because of table name character case
481 (upper/lower) differences.
482 kes Fix race condition that drops final block written to volume.
483 This happens in rare cases with multiple simultaneous jobs
484 when the Volume fills. This fixes bug #964. May be related
485 to bug #935 and possibly #903.
487 kes Fix FD->SD authorization failure, which was due to spurious
488 wakeups from a pthread_cond_timedwait(). Simply check the
489 predicate before continuing. This fixes bug #953
490 dvl Add new configuration item --archivedir
491 dvl Adjust regression tests to use tmp not /tmp. This will allow
492 multiple concurrent runs of the regression tests.
494 kes Eliminate more strerror() and replace with bstrerror().
495 kes Remove BSD getopt and replace with unrestricted IBM version.
496 kes Fix Win32 build for changed calling sequences.
498 kes Fix FD->SD authorization failure, which was due to spurious
499 wakeups from a pthread_cond_timedwait(). Simply check the
500 predicate before continuing. This fixes bug #953.
501 kes Add const char where needed (more to do).
503 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
504 kes Don't overwrite error message in check_tables_version.
506 kes Unlock batch insert tables with same calls used elsewhere.
507 kes Allow starting 59 jobs a second.
508 kes Make SD session key more random.
509 kes Add retry for SQLite opening db if it fails. Probably helps
511 kes Suppress extra error messages during batch insert failure.
513 kes Put some FD auth code on dbglvl rather than fixed.
514 kes Return insert attributes error message in db msg buffer to avoid
515 false error messages. Helps fix bug #966.
516 kes Separate batch init error messages. Probably helps fix bug #966.
517 kes If Dir gets an error during inserting attributes, cancel SD.
518 This reduces unnecessary error messages.
520 ebl Cleanup batch insert code. Probably fixes bug #965.
522 kes Turn off some code when batch insert not enabled.
523 kes Edit FD name in connect error messages.
525 kes Add code to handle tray monitor separated from Win32 FD.
526 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
528 kes Fix ANSI tape labeling. This fixes bug #954.
529 kes Increase the max block size to 4MB fixes bug #957.
530 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
531 is not properly mounted (recognized) during a poll.
532 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
533 Job that has differences reports Verify OK.
534 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
536 Release Version 2.2.4
538 kes Increase size of name string when FD making connection to SD.
541 kes Add waits to multiple exit detection code to try to force pid
542 file to always be deleted.
543 kes Restore good dev.tar.gz to rescue set appropriate binary property.
545 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
546 trying to switch drives by checking for blocking before unblocking.
548 kes Cancel storage daemon in all cases where FD reports error. This
549 should fix virtually all cases of bug #920.
551 kes Fix error message that was clobbered when Dir tells SD it does not
552 have write permission on Volume. This should fix a minor point
553 in bug #942, but not the main problem.
554 kes Add code to cancel job in SD if FD connection fails. This should
556 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
557 kes Fix migration code to get correct Volume name with multiple volumes
558 by skipping |. Fixes bug #936.
559 kes Implement patch supplied by Landon to fix bug #944 where using
560 TLS with bconsole uses 99+% of the CPU.
561 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
563 kes Move patches into patches directory.
565 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
568 ebl Using 'm' in bconsole will show messages like before,
569 and not memory usage.
571 Release Version 2.2.3
572 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
575 kes Fix bug #935, and probably also bug #903 where files were not
576 restored. MediaId was not properly set in JobMedia record after
579 kes Add ./configure search in qwt-qt4 for qwt package
580 kes Apply Martin Simmons patch that should turn off the new API usage
581 when batch insert is turned off allowing building on older
584 Release Version 2.2.2
586 ebl Detect if new PosgreSQL batch insert API is present.
587 kes Correct incorrect mempool call causing Director crash.
588 sb Update spec files for 2.2.1 release
590 Release Version 2.2.1
592 kes Update POTFILES.in
593 kes Cleanup a few underquoted AC_DEFUNs in configure
594 kes Apply patch from Martin Simmons that adds a test for va_copy to
597 kes Fix bug #921 by increasing the number of tries to create a new volume
599 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
600 can be called multiple times. Implement a version for machines
601 without va_copy() that gets a big buffer.
603 kes Integrate more portable zone offset code into bsmtp.c
604 Submitted by Attila Fülöp.
606 kes Fix bad SD->FD return status reported by
607 (James Harper) <james.harper@bendigoit.com.au>
608 ebl Fix a bug in read_close_session which return random status
609 thanks to James Harper
611 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
612 and directory names during restore of single file/directories.
613 kes Add sanity checks to .sql command when string is empty. Hopefully
614 that will resolve Dirks Director crash.
616 kes Apply patch submitted by Martin Simmons that corrects a seg fault
617 in the bsmtp chat subroutine when debug is >= 10.
619 kes Fix Director crash when running bat SQL queries.
620 kes Add David's notes on Item 8: Copy pools.
622 kes Rework projects file to be current and ready for a vote.
623 kes Enhance lex scanner error message.
625 kes Tweak LICENSE file to mention BSD code.
626 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
627 if specified on the ./configure.
628 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
629 This class is intended to allow us to open a second bsock to the
630 Director while in the restore subdialog.
632 kes Fix configure to create bat Makefile before creating dependencies.
633 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
634 kes Add a tooltip to the tray monitor.
635 dvl Set the Director's PID file before dropping privs. This fixes
638 kes Update AUTHORs file
639 kes Increase the default max concurrent jobs to 20 in FD and SD to
640 correspond with the default .conf files.
641 kes Rewrite the Win32 service routines. This eliminates the 3 copies
642 some different, of the same file created by RN when porting the
644 kes Rearrange some of the Win32 directories and the placement of the files
646 kes Set DEVELOPER flag in version.h
648 ========================================================================
649 Release Version 2.2.0
651 kes Apply a second doc patch from Marc.
652 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
653 improves the tips section that discusses how to setup multiple
656 kes Update bat README file.
657 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
658 corrects a typo in the Recycle status check in db_find_next_volume().
659 This will probably fix a number of annoying problems with multiple
661 kes Modify most of dird/msgchan.c to use bsock class calls rather than
662 bnet calls -- no functionality change.
664 kes Modify the Verify output to specify if files are missing on
665 the Volume(s) or disk. Fixes confusion in bug #916.
666 kes When more than one Volume is read in a migration job, the last
667 Volume bytes reported are from the last read volume rather than
668 the last written volume. Fixed. This fixes bug #910.
669 kes Fix display of Recycle flag after update volume=foo recycle=yes.
670 It previously printed New Recyle flag is: no. This fixes bug
673 kes Correct seg fault when switching tape drives during restore.
674 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
675 be used until after 2.2.0 release.
677 kes Remove fnmatch() in SD that permitted wild card specifications.
680 kes Fix %g in filename returned by SQL for browse tree reported by
682 kes Fix configure so that it puts config.out in the cwd rather than
684 kes Attempt to fix the locking problem reported by Eric in bug #906.
685 kes Make berrno class to leave errno unchanged after constructor call.
686 kes Make bnet_server use the heap rather than the stack to allocate
687 its socket fd pointers to avoid a crash at termination. Problem
688 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
690 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
691 and putting it in depkgs-qt along with Qt4.3.
693 kes Rework code in acquire.c that switches drives for reading when
694 the Media Type does not match. This should fix bug #906
696 ebl Fix a director segfault during job setup #907
697 kes Correct seg fault in postgresql when first operation returns no
698 rows. Fixes Dirks File browser problem seg fault with bat.
700 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
701 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
704 kes Implement PopUp YES/NO dialog for bat.
706 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
708 kes Correct RunScript to terminate job in FD on failure.
709 kes Change abort_on_error and AbortJobOnError to fail_on_error
710 and FailJobOnError in RunScripts.
711 kes Minor tweaks of code formating in RunScripts, principally to
712 avoid depassing 80 columns.
714 kes Eliminate one #ifdef Win32 in bsmtp
715 kes Implement grow tool to grow a file for testing very large databases.
716 kes Add big-vol-test to test Bacula seeking with > 5GB.
719 kes Modify find_next_volume() to return all values in Media record.
720 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
724 kes Update Release notes
726 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
727 Warning, in previous beta version, all media get from scratch keep their
730 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
731 This should fix bug #842. Made a note to look at removing the temp
732 files at the end of the install.
733 kes Add ability to mount and unmount a file device providing it is
734 marked as being removable and has the appropriate mount and unmount
735 commands defined in the Device resource. This fixes bug #830.
736 kes When applying a storage override, release all previous storage
737 definitions rather than just prepending the new storage.
738 This should prevent a good deal of confusion.
740 kes Implement ./configure search for qwt libraries.
742 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
743 Win32 FD. This should fix bug #893.
744 kes Remove an unnecessary beep in Win32 init code.
745 kes Update copyright dates in Win32 executable about boxes.
746 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
747 code with a BSD getopt.c and getopt.h.
748 kes Remove sched.h from the Win32 compat directory -- not used.
749 kes Remove the Exit menu item from the Win32 tray monitor. If you really
750 need to shut it down, do it through the services panel or the command
752 kes Remove some inappropriate Bacula FSFE copyrights.
753 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
754 kes Fix regress config non-portable test as pointed out by
755 Florian Heigl <florian.heigl@gmail.com>
756 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
757 as pointed out by Florian Heigl <florian.heigl@gmail.com>
759 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
760 Reported by Frank Sweetser.
764 kes Fix client-only build.
765 kes Integrate client-only fixes for bsys (initgroups) and conio from
766 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
767 kes Make arguments to get_scratch_volume() in same order as other
769 kes Rework the prune_volumes() subroutine so that after purging and
770 no volume found in desired pool, it will check for a scratch
771 volume. This prevents recycling the whole scratch pool.
772 kes Add code to status storage to print boffset_t (largefile support).
774 kes Move qwt (Graphics libarary for Qt4) to depkgs.
775 kes You now need a --with-qwt=<dir> to be able to build bat.
776 kes Update src/win32/cats/bacula_cats.def to include the new
777 db_get_query_dbids() call on Win32.
779 kes Correct a problem when selecting a scratch volume and moving
780 it to another pool that lost some columns.
781 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
782 kes Enhance Autochanger error messages to include Volume and device name.
783 kes Rework prune_volumes() code to take account of InChanger flag,
784 and to handle recycling volumes going to the Scratch pool and
785 current pool because the RecyclePool directive.
786 kes Implement a better and more efficient db_get_query_dbids() to
787 handle creating and passing back a list of DBIds.
791 kes Start work on new more efficient DBId subroutine. First use
792 will be for recycling volume to Scratch inchanger.
793 kes Increase number of JobIds in pruning from 1000 to 10000.
794 This to be replaced by above routine.
795 kes Begin implementation of building Qt4 on Win32.
796 kes Correct typo in fix I added for bad TLS shutdown.
797 kes Pull 2.0.3 patches into patches directory.
798 kes Update Release notes. Include qt-console in line count.
799 kes Update Projects file.
801 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
802 bug in migration code where a job that spanned two volumes
805 kes Implement new BST_DESPOOLING blocked state. Change from locking
806 during despooling in SD to blocking. This means that other threads
807 can work with the device structure, in particular the reservations
808 system while despooling.
810 kes Fix return in reservation message queue that missed clearing
811 the jcr lock (implemented 26Jun07 below).
812 kes Rename a number of dev methods to make locking function names
814 kes Document locking in lock.c. Move lock structures to new file
817 kes Move reservations message lock to lock jcr only this
819 kes Move main SD locking code into lock.c (new file).
820 kes Update Win32 build to include lock.c
824 kes Dirk committed the qwt library code for drawing graphs in bat.
825 kes Tweak install of qwt so that it is integrated with ./configure.
827 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
828 out by Eric (my typo).
829 ebl Fix configure.in to get batch mode enable
830 kes Return correct string from authenticate.cpp in bat when connecting
832 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
833 spurious line drops when using TLS.
834 kes Do not file reparse points when restoring a file that already
837 kes Implement Windows reparse points -- similar to directories, but
838 we do not descend into it. This is a first cut. They seem to
839 be backed up, but restore is not yet tested.
840 kes Remove restore_blocking in tls code when shutting a socket to leave
841 it in blocking mode. Hopefully this will fix the encryption bug
842 reported by Frank Sweetser.
843 kes When opening a file for backup, tell the OS that we are going to
844 read it sequentially -- optimization.
845 kes Change variable names in authenticate_director() to not conflict
846 with member names in bat. Caused great confusion with compiler,
849 kes Queue openssl error messages in case of comm problem.
850 kes Do shutdown() call if socket terminated.
851 kes Remove some duplicated code in tls.c
852 kes Move more of the bsock member variables into private and access
854 kes Add Frank Sweetser's tls-test to the regression suite.
856 kes Add Swedish sv.po file
858 kes Don't print clock skew message in FD if less than 3 seconds diff.
859 kes Add a bit of VSS info to status client.
860 kes Implement a first cut of Vista VSS, using Win2003 code.
864 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
865 loaded tape but uses first drive).
866 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
867 This was indeed a Win32 issue.
869 kes Simplify search of autochanger for in-use Volume.
870 kes Fix exit condition of check for in-use volume. kes Remove
871 inappropriate my_postgresql_free_result() in db_close()
873 kes Fix bad return in FD when encryption signature not found.
874 Probably caused a crash.
875 kes Inhibit missing encryption signature error messages for
876 file types where no signature computed.
877 kes Correct inverted check on autochanger in reservation system.
878 kes Tweak debug code in autochanger reservation.
880 kes Add some additional locking in the cats directory in subroutines
881 that modify packet variables called from batch insert.
882 kes Rework how dcrs are allocated. new_dcr() can now be called
883 with an existing pointer, and it will simply clean it up.
884 This allows the reservation system to test various different
885 devices, and will permit easy device changes.
886 kes A bunch of changes all over to handle new new_dcr() calling
888 kes Work more on the Volume management in the SD. Remember Volumes
889 for tape drives and for autochangers (even virtual disk changers).
890 kes When looking at the Volume list to reserve a drive, handle
891 autochanger names correctly by interating through the changer
892 devices. Also call the Director to see if a Volume is suitable
894 kes Fix some bugs in bscan. Make sure all media records are written.
895 Make sure that valid JobMedia records are written for disk files.
896 Previously they were completely wrong.
897 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
898 that the URLs don't change and so that the developers will all
899 work off the same copy. Rebuild from scrach.
900 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
904 kes Fix seg fault in FD from incorrect digest size.
905 kes Fix argument to non-OpenSSL crypto.c subroutine.
909 kes Remove a few malloc()s from the encryption code.
910 kes Use the class calls to bsock in filed/backup.c and restore.c in
911 place of the old bnet_xxx code.
912 kes Implement code that does an on the fly calculation of the
913 signing digest during restore of encrypted files. It makes
914 a best guess at the algorithm, and if it is not correct, will
915 then revert to the old code which reads the file after it is
917 kes Implement at least one missing crypto stream in stream_to_ascii()
918 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
919 #877 where a reload with bad syntax causes Dir to exit.
921 Cut: 2.1.14 beta (not released)
923 kes Do not free a volume on a tape drive until another volume is
924 mounted and read, or the autochanger unloads the volume.
925 This should help the SD re-use volumes that are already mounted,
926 and should fix bug #886.
927 kes Apply patch from user brettedgar that allows gnome2-console include
928 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
929 kes Apply patch from Lucien Weller that fixes day of week calculation
930 because of DST flag problem. Fixes bug #887.
932 kes Move find_next_appendable_volume() to after acquiring a valid device
933 in reserve.c. This fixes bug #864 -- confirmed by reporter.
935 kes Unable to reproduce bug 872. However added additional testing for
937 kes Bug #874 resolved by documenting SQLite limitations.
938 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
939 kes Bug #881 resolved by removing typo in mtx-changer script.
940 kes Made Frank Sweetser's wiki the official Bacula wiki with his
941 approval. Added a link to the wiki on the web page, and implemented
942 a backup from http://paramount.ind.wpi.edu
944 kes Fix update allfrompool to pass pool name.
946 kes Convert to pure GPL v2 license.
947 kes Fix sscanf problems reported by Peter Buschman that caused
948 a bus error on Solaris.
949 kes Rework (simplify) the select prompt in bat.
950 kes Move get_jobid_from_tid() into lib and create a
952 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
953 should definitely fix the problem of lost error messages in the
955 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
956 kes Eliminate tcpd.h from the project. Enclose the #include from the
957 library with extern C ...
958 kes Add print of signal name when a signal is trapped.
962 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
964 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
965 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
966 makes SQLit3 run 30 times faster, though a bit less safe.
967 kes Implement --with-batch-insert in configure and detection of thread
968 safe libraries. It is on by default, but turned off if no thread
969 safe library (e.g. SQLite 2) is available.
971 kes Fix Bacula PostgreSQL buffer overruns.
972 kes Do better checking for NULL results returned from PostgreSQL;
973 implement retry for failed queries; clear results buffer after
974 failed query. Hopefully this will correct the PostgreSQL failures.
976 kes Implement algorithm to handle only one appendable volume with
977 Prefer Mounted Volumes = no.
978 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
979 returned from a query.
980 kes Make volume lock recursive.
981 kes Implement an additional volume reservation algorithm that
982 starts by considering all reserved volumes then uses the
983 old brute force algorithm of searching the resources to
984 find a suitable device.
985 kes Add new reservations debug code and refine the old code.
986 kes Update the win32/dll/bacula.defs file.
988 kes Tweak reservations algorithm to permit a few more cases, i.e.
989 volume reserved, but on different drive, ...
990 kes Enhance SD status to include Pool and Media Type for drive in a
991 more readable format (a bit longer).
992 kes Fix PostgreSQL double free.
994 kes Minor refactoring of restore decryption code.
995 kes Add code to smartall.c to detect double free of a buffer.
997 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
998 so that bsmtp will create a correct email address (mailbox only).
999 kes Modify 'memory' command so that the buffers are listed as 'In use'
1000 to avoid confusion with Orphaned buffers.
1001 kes I reworked the OpenSSL include/lib flags to be handled in
1002 the standard Bacula way, which should fix bug #863 concerning
1003 non-standard OpenSSL libraries.
1005 kes Implement Help Browser window for bat.
1006 kes Fix reload bug that reset StorageId to zero.
1008 kes Fix TLS #ifdefing when TLS turned off.
1009 kes Ensure that when labelling a tape with Slot=0 that InChanger
1011 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1013 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1014 add DISTINCT (required by PostgreSQL).
1015 kes Implement BSOCK authenticate_director() method. Eventually will
1016 authenicate all daemons.
1017 kes Move several more functions into the BSOCK class.
1019 kes Add code to tell the OS that we no longer need a cached
1020 file that we were reading. In findlib/bfile.c. Also,
1021 only cache files that we are reading. Thanks to
1022 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1023 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1024 kes Implement script to automatically generate cats and dll .def
1025 files for Win32 dll.
1026 kes Update README.mingw32 to include new .def file generation.
1027 kes Correct typo in UTF-8 error message as reported by:
1028 jhernandez <julianhernandez@gmail.com>
1029 kes Add additional sm_check() code on debug level 1.
1030 kes Set default debug level to 1.
1031 kes Trap SIGABRT in attempt to get traceback.
1033 kes Reduce bat connect timeout from 30 to 15 seconds.
1034 kes More restructuring and implementing BSOCK class in place of
1036 kes Remove a few unnecessary malloc() tests in crypto code.
1037 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1038 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1039 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1041 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1043 kes Fix Verify InitCatalog. The attributes were not pointing to the
1044 correct saved location.
1045 kes Implement message callback so that GUI is sure to get all
1046 daemon messages. Currently displayed in a dialog in bat.
1047 kes Ignore SIGUSR2 (Bacula timer) in bat.
1048 kes Apply regress patch from bug #859 to allow regress to work
1049 with Solaris compiler.
1051 kes Begin adding TLS support to bat.
1052 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1053 clean up lex.c and make it more readable.
1055 kes Move more bnet functions into the BSOCK class.
1056 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1057 kes Complete change of berrno strerror() method to bstrerror()
1059 Release: 2.1.10 beta
1061 kes Cleanup incorrect email addresses in bsmtp.
1062 kes Make bat display initial messages rather than discard them.
1064 kes First cut of adding .mod to the run command.
1065 kes Implement auto display of messages in bat.
1066 kes Enhanced preferences to allow all Bacula output to be
1069 kes Try to make bsmtp date routines more generic.
1070 kes Fixed bug #856 autochanger documentation.
1071 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1072 kes Add new cats entry point so Win32 builds.
1074 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1076 kes Do better checking for the MySQL 64 bit libraries looking for both
1077 .a and .so libraries.
1078 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1079 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1080 kes Require the thread safe version of MySQL during configure. Thanks
1081 to Andre Noll for pointing this out.
1082 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1083 continuing in migration code.
1084 kes Apply implementation of tray-monitor font derived from gnome-console
1085 submitted by Andreas Piesk <a.piesk@gmx.net>
1087 kes Eliminate important memory loss in SQLite
1088 kes Fixed the batch insert MySQL thread specific data that was not
1089 being freed. See cats/mysql.c:db_thread_cleanup().
1090 kes Fix restore before command.
1091 kes Convert old hdr.name to name() in a few places.
1092 kes Implement update jobid command.
1093 kes Return all time_t dates in db_get_job_record()
1094 kes Stop watchdog in SD earlier.
1095 kes Put Pool just after Storage in please mount message.
1096 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1099 kes Update the po files.
1100 kes Fix Verify InitCatalog by making it cache attributes.
1102 kes Change name bacula-bat to bat for man 1 page to correspond to
1104 kes Check for client and store NULL pointers in status command. This
1106 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1107 kes Fix sign extended editing of %p.
1108 kes Clean out a little old #ifdefing in cats/mysql.c
1110 kes If time diff between DIR and FD is more than 600 seconds convert
1111 INFO message to WARNING.
1112 kes Implement heap size display in status for all daemons.
1113 kes Attempt to fix MySQL db open memory loss (not successfull).
1114 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1115 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1116 Query. This looks like a MySQL but but by doing extra releases,
1117 the memory goes away. This should fix bug #847.
1119 kes When backup fails, cancel SD before waiting for sd termination.
1120 kes If SD is waiting for FD to connect during cancel, wake up the
1122 kes Fix fsf code so that errno is correctly reported.
1123 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1125 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1126 so that Bacula doesn't later stumble into a seg fault.
1127 kes Use the term Restore Client in the restore Job report.
1128 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1129 the original job's FileSetId.
1130 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1131 spooling in migration jobs. Not yet tested.
1132 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1133 reading conf file from a pipe. However, do it with open_bpipe()
1134 rather than popen. Not yet tested.
1136 kes Fix an ugly bug where the VolCatBytes were getting updated
1138 kes Implement bconsole memory command that prints current memory
1139 usage, plus smartalloc dump.
1140 kes Clarify some error messages in backup, admin, and migrate.
1141 kes Shrink label dialog to smaller size.
1142 kes Invert Cancel OK buttons on restore to be OK Cancel.
1143 kes More strerror() to bstrerror() conversions.
1145 kes Start implementing bstrerror() in place of strerror().
1146 kes Stripping path -- seems to work.
1148 kes Prevent door and port files from being restored (mostly
1150 kes Free an unreleased buffer in compat code.
1151 kes Change console Job name from *Console* to -Console- to eliminate
1152 Win32 filename problems. Put Win32 path separator when creating
1153 Console file. This fixes bug #846.
1154 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1156 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1158 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1159 to force Win32 error message.
1161 kes First cut strip path. The data should be passed to the FD,
1162 but nothing is done with it yet.
1163 kes Enhance the digest and signature routines in the crypto
1164 library to accept a JCR and to use it to print error messages
1165 so that they will go in the Job report rather than the daemon's
1167 kes Simplify some of the verify signature code.
1168 kes Simplify a few of the alternative returns in the signature
1171 ebl Use only POSIX regex instead of GNU regex in breg.c for
1172 File relocation. It fix broken freebsd compilation.
1173 kes Convert all other Dir files to use new ua class message
1175 kes Tentative fix for missing digest signature in bug 807.
1176 kes Correct handle problem in new win32_ftruncate routine.
1177 kes Convert ua_purge.c and ua_update.c to use new ua class
1178 message routines for bat.
1180 kes Correct incorrect installation of LICENSE in Win32 installer.
1181 kes Display LICENSE at the beginning of the Win32 install.
1182 kes Attempt to correct the need for the png files to be installed
1184 kes Reapply my bat.conf install script in qt-console. I think I
1185 editted bat.pro instead of bat.pro.in and it was lost.
1186 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1187 the /var/lock/subsys for subsysdir. Also corrects typos in the
1190 kes First cut update job.
1191 kes Correct configure to include qmake of src/qt-console directory.
1193 kes Make restore job yes/mod/no print in one command so GUI works.
1194 kes First cut implementing backup and restore client.
1195 kes Correct editing in Verify output that caused a seg fault.
1197 kes Insure that bat.conf is not overwritten during installation.
1198 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1199 while I was implementing migration in March 2006 !
1201 ebl Cleanup file relocation, using char *RegexWhere instead of
1202 char *where + bool where_use_regexp
1203 kes Update some manpages and add bat manpage.
1204 kes Make a first cut at converting bacula.spec.in for bwx-console
1206 kes Apply patch from John Goerzen to add hostname as fourth argument
1207 to make_catalog_backup script.
1208 kes Fix typos I introduced into bsmtp.c
1209 kes Make pm_strxxx() routines handle input of NULL pointer. This
1210 is to protect from NULL pointers returned from SQL databases.
1211 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1212 kes Add more debug to FIFO code -- fix fifo regression test.
1214 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1215 kes Add thread timer to bnet_connect() to break from OS if wait time
1218 kes Update Win32 build to include new files, new symbols, and
1220 kes Implement socket level heartbeat (tcp_keepidle)
1221 ebl Commit File relocation patch
1222 kes Make bat have 'make install' target.
1223 kes Warn during install if old gnome-console binary found.
1224 kes Warn during install if old wx-console binary found.
1225 kes Add -8 option to bsmtp command line to add content type utf-8.
1226 Fixes bug #809. (Character coding problem in bsmtp).
1227 kes If < is found in target (from, to, cc) then do not enclose the
1228 target in < > in bsmtp. Fixes bug #772 (malformed address).
1229 kes When printing certain items in dbcheck, stop after 300000.
1230 Fixes bug #822. (dbcheck loops).
1231 kes Incorrect status in Dir after waiting for mount with poll set.
1234 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1236 kes Print waiting to reserve a device every 5 mins.
1238 kes Don't call close_part in label.c if tape and relabel.
1239 kes Don't free volume if busy in close() -- should help with
1241 ebl Fix #824 RunScript bug (After script could be execute twice)
1242 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1243 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1244 Add a regression script to test RunScript
1246 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1249 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1250 deprecated. No additional bugs will be fixed, and they will be dropped
1251 in a future release (probably 2.4.0).
1252 kes Change name of wx-console to bwx-console to make it more Bacula
1254 kes Change the name of gnome-console to bgnome-console to make it
1257 kes Some time in March, a Feature Request with patch from Jorj Bauer
1258 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1260 The ability for the director to validate a Client (FD) CN against
1261 an arbitrary set of patterns rather than the hostname, with
1262 A new 'TLS Allowed CN' set of directives which are implemented
1263 in the Client resource. Then pattern matching is used in place
1264 of hostname matching against the Certificate's CN. As an example, we
1265 have certificates which (a) use a local CA, and (b) have a CN of the
1267 kes Add new/changed entry points to Win32 build
1268 kes Create unaccepted-projects for projects that are not accepted.
1269 kes Simplify locking in the reservations system.
1270 kes Add more debug code in reservations.
1271 kes Make sure error condition on reserving a volume is handled correctly.
1272 kes Correct handling of volume_in_use.
1273 kes Correct handling of initializing a device.
1274 kes Move handling of broadcasting releasing a device into release_device().
1275 kes Correct attaching dcr to dev so that it is only done if device
1276 is properly initiated.
1278 kes Locking debug level tweaks in SD.
1279 kes Tweak new Volume code.
1281 kes Add exec external-command [wait-seconds] to bconsole. This
1282 executes the external-command. Note! normally external-command
1283 should be enclosed in double quotes.
1284 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1285 it should normally be off in a production system.
1287 kes Implement die command for SD so that we can force it to dump.
1288 kes Implement SD lock debug code.
1289 kes Implement new algorithm for keeping Volume list in SD. It
1290 is now owned by the device.
1292 kes Implement new code for freeing in use volumes that should
1293 resolve if not all, some of the problems of multiple drive
1294 tape conflicts described in bug 801.
1296 kes Fix gui/bacula-web/images files in svn.
1297 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1299 ebl Fix a bug in batch mode (in string escape)
1300 kes Correct migration prune SQL typo that crept in in a
1301 recent 2.1.x change.
1303 kes Move bnet_despool() into class in bsock.c
1304 kes Modify job report to include director name and Build OS.
1305 kes Move drop root privilege and check_catalog() before fork.
1306 kes Add update database scripts (version 9 to 10) to updatedb directory.
1308 ebl Check size and age of each file after its backup to see if
1309 it has changed during backup, if 'checkfilechanges' is set.
1310 The FD will do an extra check (stat(2)) after
1311 each file backup. mtime, ctime and size are compared with
1312 'before backup' information. If time or size mismatch, an
1313 error message will be generated. You must upgrade FD to use it.
1315 kes Make database name and user configurable
1316 --with-db-name=xxx --with-db-user=xxx
1317 kes Add back database type to message.c for debugging.
1319 kes Implement dir_sql() which issues an SQL query.
1320 kes Modify bat medialist to use dir_sql() and do some minor C++
1321 formatting as well as eliminating a number of pointers, simplifing
1324 kes Fix some of the mtx-changer grep commands for tape label readers.
1325 kes Convert a number of bsendmsg into the appropriate send/warning/error
1326 message class calls.
1327 kes Suppress the using database message in the .sql command.
1328 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1330 kes Add context menu for floating a window.
1331 kes Some minor cleanup and name changes in qt-console
1332 kes Add doing mt setblk 0 in Win32 mtx-changer.
1333 kes Apply Martin's bug fix to move definition of ENODATA for
1335 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1336 sqlite2 and sqlite3.
1338 kes More pruning cleanup.
1339 kes Turn on wait_for_drive by default in mtx-changer.
1340 kes Turn on Batch insert code by default as it now passes regression.
1341 kes Add ./configure --enable-bat to enable building of Bat.
1342 No install yet though.
1344 kes Implement a new .sql command for bat.
1345 kes Implement code to turn off pruning in obtaining the next volume.
1346 Pruning is turned off for the status dir command, but turned on
1347 for SD requests and for the list nextvolume command.
1349 kes Correct Qmsg() that was not updated correctly when committing a
1350 previous change (probably the recent TLS patch).
1352 kes Write new subroutine is_volume_purged() that explicitly checks
1353 if the Volume is purged, and if so marks it as such. This should
1354 resolve problems reported about needing to mount twice to recycle
1356 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1357 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1358 amount of duplicated code.
1359 kes Do volume pruning only for the Media Type desired (reduces pruning time
1360 if multiple Media Types are in the same pool).
1361 kes Implement more detailed info in the Job report for the Bacula version
1363 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1365 ebl Add bbatch tool to bench database and insert mode.
1366 Fix sql quote stuff in batch mode
1367 Fix sql stuff for mysql
1369 kes Correct problems with am/pm scheduling. Fixes bug #808.
1370 kes Implement new prunning code that prunes up to 1000 jobs at
1371 the same time. The same technique can be applied to a number
1372 of other prune/purge subroutines.
1373 kes Add an insanity check when starting a new tape job to ensure
1374 that the tape position has not been changed. If so fail the
1376 kes Fix Win32 build for dlls to add the folllowing:
1377 src/lib/bsock.c -- new file with new entry points
1378 src/lib/dlist.c -- new entry points
1379 src/cats/sql_create.c -- new entry point
1380 src/cats/sql_cmds.c -- new DATA item exported
1382 ebl batch mode cleanup bscan-test is ok now.
1383 kes Implement SD code to check length of disk volume before appending.
1385 kes Correct return status on db_batch... routines.
1386 kes Add call to db_write_batch_file_records() to migration code.
1387 ebl Fix AfterJob timing
1388 kes Move the checking of the database in initializion of the Director
1389 to after we drop privileges. This avoids the need for both root
1390 and bacula access to the DB.
1391 kes Correct a misplaced variable definition in src/filed/backup.c
1392 kes Correct how the new batch insert db_create_attributes_record()
1393 uses the arguments. Caused a seg fault in bscan.
1394 kes Implement lock() and unlock() methods in DEVICE class.
1395 Implement block() and set_block(xx) methods in DEVICE class.
1396 kes Modify bnet_connect() so that it uses time() to check for the
1397 wait time expiring (on some OSes, some system calls may not
1398 return immediately).
1399 kes Modify Verify to obtain the previous JobId when it is actually
1400 running rather than at schedule time (as it was in 1.38.x).
1401 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1403 kes When checking pid in pid file, continue running if the pid is
1404 the same as ours. This occurs on IRIX after a system crash.
1407 kes Extend new GUI API.
1408 kes Make the ua structure a class, and implement send_msg(),
1409 error_msg(), warning_msg(), and info_msg().
1411 kes Apply fix from for building wx-console on the Mac from
1413 kes Implement new select mechanism for GUI programs.
1414 kes Reorganize initialization of stackedWidgets in bat.
1416 kes Add updated nagios plugin supplied by Christian Masopust.
1418 kes More bat implementation.
1419 kes File migrate bug with Pool Occupancy using mediaid instead
1420 of jobids. Fixes bug #795.
1421 kes Fix orphaned buffers in filed backup and verify due to
1422 crypto buffers not freed during errors. Fixes bug #789.
1423 kes Extend new GUI api code to tree commands.
1424 kes Ensure that tree and dot commands check console ACLs.
1425 kes Permit marking directory with trailing slash.
1426 kes Allow 20 console connections (instead of only 10).
1428 kes Add smartctl call to bacula-sd.conf as an example of getting
1431 kes Modify jobq.c to let simultaneous restore jobs run. This may
1432 cause them to fail if they cannot get a drive.
1433 kes Add Client Connect Wait to Storage daemon to permit users to
1434 modify the time the SD waits for a FD connection.
1436 kes Correct virtual changer check which was backwards. This caused
1437 volumes to be unloaded into slots already occupied.
1439 kes Apply Command ACL filter to JobId list in restore command.
1440 kes Correct typeo in var.c patch.
1442 kes Don't let Bacula prune File or Job records for the current Job.
1443 kes Fix variable substitution pad + inc bug reported (with patch)
1446 kes Correct SQLite log table index as reported by Luca Berra.
1448 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1450 kes Begin implementing new comm signals for API.
1451 kes Fix a few places in lib/message.c where the open fd may
1453 kes Continue implementing lib/bsock.c (real class). Make jcr,
1454 who, host, and port private. There are new methods to access
1455 them for non-class use. This required touching a number of files.
1457 kes Add LANG=C to autoconf/randpass so it works with languages other
1458 than English. Fixes bug #788.
1460 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1462 You will not be able to generate Include/Exclude list any more.
1463 It will be fixed soon.
1464 If you want to use this, you can apply
1465 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1467 kes Restore of sockets created false error messages because Bacula
1468 no longer restores sockets, but the code was still trying to
1469 set the attributes on a non-existent file. Reported by a user.
1470 ebl finish RecyclePool feature
1471 Media will takes Pool.RecyclePool
1472 when moving from Scratch to a Pool or when user will do
1473 update volume=xxx frompool
1474 To use it, add RecyclePool = aPool to your Pool resource
1477 RecyclePool = Scratch
1481 kes Expand new BSOCK class adding signal() and new BNET signals.
1482 kes Begin enhancing the dot commands adding a new API function
1483 that returns more information and will make it easier
1484 to interface to the Director from a program.
1486 kes Make DEVICE fd private. Its new name is m_fd, and can be
1487 obtained with dev->fd() outside the class. This is the
1488 first of many DEVICE members to be made private.
1489 kes Implement Michael Renner's idea on having a virtual disk
1490 changer. I made some minor modifications (e.g. I did not
1491 implement the Virtual Changer directive, but simply set
1492 the Changer Command to an empty string.
1494 kes Implement a BSOCK send() method that writes the whole record
1495 in a single write() request rather than in two.
1496 ebl add update volume=xxx recyclepool=yyyy
1497 volume takes recyclepool from pool when using update volume=xxx from pool
1499 kes Fix encryption deblocking bug, which caused some restored files
1500 to be truncated. This fixes bug #763.
1501 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1502 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1504 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1505 ebl Use btime_t instead of uint64_t in media patch.
1507 kes Optimize the use of the database a bit in the Status dir command.
1508 Only open it when needed, ensure that if any previous database
1509 was opened, it is closed.
1511 kes Correct VolCatBytes bug from media patch.
1512 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1513 in the case of orphaned records.
1514 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1515 and File records in 300K chunks to be more efficient. This
1516 idea came from Juan Luis Frances (if I remember right).
1517 kes Apply Eric's scratch patch that moves a purged Volume to
1518 the RecyclePool. Question: how is RecyclePool set? what
1519 happens to the ScratchPool?
1520 kes Apply Eric's media patch that collects read/write media
1521 times as well as byte counts. This patch requires a
1522 simultaneous upgrade of the DIR and SD. Note, there
1523 should be some way to turn off timing. I'm not sure
1524 times are in Bacula units.
1525 kes Apply Eric's batch-insert patch.
1527 kes Update projects list.
1529 kes Implement Include/Exclude file lists in FD as dlists using
1530 the new dlistString class. This permits efficiently having
1531 large include/exclude lists and completes project Item 25.
1532 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1533 console is authorized to cancel the job. This fixes bug
1535 kes Modify SD so that the VolCatJobs medium record is updated
1536 at the beginning of a Job rather than the end. This
1537 fixes bug #775 where exceeding MaxVolJobs caused jobs
1539 kes Added a mutex around getting and setting Volume information
1540 so that multiple simultaneous jobs will single thread.
1542 Switch to using Subversion
1543 kes Remove src/pygtk-console/ from configure
1545 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1546 plus the entrypoints.
1547 kes Apply patch supplied that corrects debug print
1548 in canceling jobs for max run time. Supplied as
1549 part of bug #621, which was previously fixed.
1551 kes Test on job_canceled() and sd_msg_thread_done inside
1552 loop starting the message thread to avoid a race condition.
1554 kes Remove rl_catch_signal from console.c as it conflicted
1555 with the header definition. Fixes bug #765.
1556 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1558 kes Clarify some stored/acquire messages to indicate if the
1559 problem is with read or append.
1561 kes Fix memory leak with storage ids in cats/sql_get.c
1562 kes Terminate watchdog earlier to avoid reference to released
1563 memory -- reported by Jason Austin.
1564 kes Move closing the database from jobq.c to the director daemon
1565 termination routine. This fixes memory leaks for shadow jobs
1566 (i.e. migration jobs).
1567 kes Free up the unique jobid chain items in migrate.c. This fixes
1568 a memory leak problem.
1569 kes Convert some ugly looking for statements to use foreach_alist
1570 in findlib/find.c. This will facilitate converting the structures
1571 to use dlist (for large include/exclude lists).
1572 kes Fix a bug in the btree.c and btree.h routines, then rename them
1573 rblist and add them to be built in src/lib. Include some new
1574 methods written by Rudolf Cejka that make the code more readable
1575 (hides some of the ugly casting).
1576 kes Add set_next() and set_prev() methods which make the code much more
1577 readable. Also add a new dlistString class that facilitates storing
1578 strings in dlists. To be used in the large include/exclude lists.
1579 kes Make some trivial modifications to lib/tree.h that use rblist
1580 rather than dlist for storing the tree links. This was suggested
1581 by Rudolf Cejka. The result of this is that the restore tree now
1582 uses red-black binary trees rather than simple linked lists. This
1583 should give rather dramatic speed improvements for directories
1584 contining large numbers of directories/files (more than 10000).
1586 kes Fix maxruntime bug #621.
1588 ebl Implement the include JobID in spool file name project.
1589 kes Reorder projects file in order determined by Jan 2007 vote.
1590 kes Implement item #12 on project list -- quick release of FD by
1592 kes Fix open of SQLite3 db where user does not have write permission
1593 so that DIR does not crash. Fixes bug #761.
1595 kes Add back missing @ in Win32 Makefile.
1596 kes Change 'Device not configured to autolabel' from INFO
1598 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1599 which should restart an indefinite # of times.
1600 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1601 other DIR specifications.
1603 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1604 Fix path quoting in SQLite scripts.
1605 Fix problems with SHGetFolderPath.
1607 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1609 kes Fix Job restart on error bug that promotes an Inc to a Full
1610 backup. This should fix bug #755.
1611 kes Add qt-console and first cut of code.
1615 kes Fix Bacula->Documentation link on Win32 to point to index.html
1616 instead of bacula.html. Fixed bug #750.
1617 kes Return JobId in db_get_job_record() when JobId==0. This should
1619 kes Do not release source pointers when restarting a failed job.
1621 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1622 This *should* fix bug #747.
1623 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1626 kes Modify USTORE constructor to set an empty store_source string,
1627 and don't copy the store_source string in a cancel. Hopefully
1628 this will fix Arno's seg fault, bug #744.
1629 kes Add back code to disable conio in configure. Fixes bug #743.
1630 kes Correct the Options scanner in the FD to correctly handle
1631 SHA1 option, which was eating the next option. Reported by
1633 kes Add code to indicate when the SD is spooling, spool wait, and
1634 despooling as requested by Alan Brown.
1636 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob