1 Technical notes on version 2.4
5 kes Release main control rwlock if ABORTing.
6 kes Make watchdog connect timeout queue messages rather than sending
7 directly to avoid lock conflicts with the real thread.
8 kes Remove const char that causes problems with Python, which has
9 older 'incorrect' headers.
10 kes Add const char in dbd.c to avoid compiler warnings.
12 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
13 mt. This fixes bug #1116.
14 kes Fix failure of 2drive-concurrent-test. Always read label;
15 clear_unload() only after drive is defined in acquire_for_read().
17 Release Beta version 2.4.1-b1
19 kes Back out bad src/lib/base64.c change.
21 kes Generally clean up the manual tape loading code. The main
22 conceptial change is that when a volume is marked to be unloaded,
23 its volume name is retained, and it is only marked as unloaded
24 when either the autoloader says it is unloaded or another tape
25 is read on that drive.
27 kes Fix a recycling problem with two autochangers reported in bug
28 #1106. This may also (unlikely) fix a second recycling bug as
30 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
32 kes Fix format problem in bscan output reported in bug #1105.
34 kes Copy more data when restarting a job so that run
35 overrides are kept. This should fix bug #1094.
36 kes Backport updates to jobq.c where possible.
38 kes Fix bug where SD did not ask operator if the device could not
39 be opened. Reported by Eric.
41 kes Add dbuser to DIR conf file (replaces user).
42 kes Add --with-db-password to ./configure
43 kes Fix regress to handle db_password.
44 kes Fix a couple of pedantic compiler warnings.
45 ebl Fix bug when starting a restore on a storage that doesn't
46 have the requested MediaType.
48 kes More work on word alignments -- eliminate all ints from
49 the configuration routines.
51 kes Fix bug reported by Scott Barninger where the bacula script
52 refers to scripts in the wrong directory. Needed to meet the
53 requirements of recent FHS location changes.
54 kes Fix word alignment problem on non-Intel 64 bit machines
55 such as Solaris. This should fix bug #1097 -- bus error in SD.
57 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
61 kes Update version to reflect the magnitude of the SD changes.
63 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
66 kes Add create_postgresql_database.sql to Win32 installer. Should
67 fix problem reported by Juilio Monteiro.
68 kes Get correct slot when auto unloading a device. This fixes bug
71 kes Fix multiple media restore.
72 kes Make DEVICE Slot private and access it via a method.
73 Allows better control over when it is set and cleared.
74 kes Fix possible seg fault if SQL error.
76 kes Add debug code to SD.
77 kes Fix renaming a Volume, which used the wrong Volume name.
79 kes If operator has rewind tape, print warning, release tape and
80 try once more. If tape is positioned somewhere, something went
81 wrong, so mark the tape in error and try once more. Previously
82 this error was fatal, now it produces an error message.
83 kes Ensure correct volume name displayed during restore
84 kes Ensure that Volume is mounted for restore.
86 kes Fix a few more Coverity reported problems.
88 Beta Release Version 2.2.10-b4
90 kes Enhance a couple of SD debug messages.
91 kes Tweak unload flag setting and ensure it is set during swap.
93 ebl Fix #1091 about bad output in estimate command.
95 kes Modify autochanger locking to attempt to avoid race
97 kes Make sure device not busy before doing label command.
98 kes Display open() errors except when polling. Previously too
99 many were suppressed. This should fix bug #1070.
100 kes Fix Win32 reparse points. Bacula will not recurse into any
101 reparse point directory, including mount points, unless the
102 directory is explicitly mentioned at the top level (same as
103 with Unix). A file that is linked to another file will be
104 backed up -- much as Unix does for hardlinked files.
105 This fixes bug #1041.
107 kes Remove double quotes from ChangeLog and ReleaseNotes
108 kes Remove StorageId test when pruning and recycling (Eric's changes).
109 kes Remove old form of locking when getting volumes -- causes deadlock.
111 kes Fix buffer overruns detected by Coverity.
113 Beta Release Version 2.2.10-b3
115 kes Tweak joblog display.
117 kes Implement --without-qwt
118 kes Fix layout of restore tree dialog
119 kes Add configure bat QWT libraries, so that bat can be built
120 with or without the QWT libaries.
122 kes Apply batfix bat cleanup patch from Riccardo.
123 kes Make sure we unload the right slot when swapping.
125 kes Improve SD reserve debug code.
126 kes Testing an improvement to free up volumes no longer in use.
128 Beta Release Version 2.2.10-b2
131 kes Rework SD acquire for read to handle autochanger Volume
133 kes Implement regression that explicitly tests swapping a Volume
134 from one drive to another.
135 kes Enhance disk-changer to detect most error conditions.
136 kes Fix SD code so that it properly swaps a Volume between drives.
137 This fixes bug #1083.
139 kes Prevent a Volume that is being swapped from being freed from
140 the volume list. This will most likely fix, at least partially,
142 kes Fix strippath so that it does not get a buffer overrun and crash FD.
143 This fixes bug #1078.
144 kes Make inability to change owner/group when creating a dir only a
145 warning rather than an error.
147 ebl Fix SQL query in migration code
149 kes Force unload of volume when wrong volume mounted in SD.
151 kes Fix bat seg fault at termination.
152 kes Add Bacula generated version to bat about box.
154 Beta Release Version 2.2.10-b1
156 kes Permit multiple simultaneous restores -- experiment.
158 kes Backport development stream SD reservation system changes.
161 kes Move final volume swapping code to DCR method and
162 call it from acquire_for_read().
163 kes When wrong volume is mounted during read, unload_autochanger.
165 kes Stop searching for Volumes in SD askdir if DIR returns the
166 same volume name twice in a row.
168 kes Tweak the swap Volume from one drive to another code so that
169 it now seems to work.
170 kes Resolve several problems with recycling that broke the new
171 code (these problems are in 2.2.9 as well).
172 kes Remove the volume lock when calling the sysop code.
173 kes Don't mark a reserved volume with no writers as unused otherwise
176 kes Rework class structures for VOLRES, DCR, and DEVICE to make
177 the method names a bit more logical, and for more logically
178 handling the responsibilities.
180 kes Remove redundant code in terminating the scheduler that just
181 causes a seg fault in many cases.
182 kes Cleanup releasing a volume and make it a DCR method.
183 kes Improve algorithm for detecting pre-reserved volume and
186 kes Tweak volume swapping code so it works.
187 kes Correct name overloading in mount.c
188 kes Replace released flag in VOLRES with reserved and add access
189 methods for the VOLRES class.
190 kes Prevent volume from being released while being swapped.
191 kes Refactor parts of stored/mount.c
193 ebl Add sanity checks for VolWriteTime and VolReadTime
194 ebl Take care of bad clock changes while computing VolWriteTime
195 and VolReadTime. This should fix or limit #1066
196 kes Correct error string numbers in dird/catreq.c
197 kes Restructure reserving, acquiring, and mounting volumes. Calls to
198 autochanger are deferred for mount.c -- simplifes the code.
200 kes Do not prune any running job. It just fails the job.
201 kes Lock the volumes when changing dev->reserved_device and marking
202 the volume unused otherwise the device can get reserved by
203 another job before the volume is released, thus blocking it.
206 Beta Release Version 2.2.9-b7
208 kes Close bat console windows first to eliminate error message
210 kes Remove useless code in Scheduler that causes seg fault on
212 kes Correct some SD catalog request error messages.
213 kes Don't allow pruning of any running job.
214 kes Turn off code in read_record that causes a seg fault in the SD
215 when reading past an EOS_LABEL.
216 kes Turn off unloading the autochanger in reserve.c as it just
218 kes Lock volumes when unreserving a device.
219 kes Do not mark volume unused when recycling.
220 kes When acquiring, don't mark volume unused if it is reserved (busy).
222 Beta Release Version 2.2.9-b6
224 kes Eliminate ./configure warning on po directory
225 kes Fix bug #1063, reuse of freed ptr in list nextvol.
226 kes Release regex compile buffer in filed/job.c
227 kes Add proper type of const char in sql_create.c
228 kes Turn off debug in daemon termination routines
229 kes Move free_volume_list() before devices are freed in stored.c
230 kes Fix reference to uninitalized stack variables in bregex.c.
231 This should correct bug #1067.
233 kes Fix possible seg fault in SD when freeing a volume entry.
235 kes Apply patch from bug #1069 that corrects spurious error messages
236 when ACLs enabled on SGI but no ACL exists.
237 ebl Fix a storage deamon segfault at debug level 500.
239 Beta Release Version 2.2.9-b5 -- not released
241 Beta Release Version 2.2.9-b4
243 kes Re-enable code to remember last volume mounted on a non-tape
245 kes Add patch supplied in bug #1068 that fixes a SD crash when using
246 a Virtual autochanger.
247 kes Generate correct JobMedia records during spooling/despooling when
248 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
249 <tih@hamartun.priv.no> for excellent analysis and testing.
251 Beta release Version 2.2.9-b3
253 kes Rework certain SD locking based on gdb tracebacks of deadlocks
254 sent by Eric. This code now uses only the volume_lock() rather
255 than the reservations lock when at EOM and acquiring a new
257 kes Ensure only one exit point in several subroutines.
259 Beta release version 2.2.9-b2
261 kes Fix to initial tape drive open to release the volume name
263 Beta release Version 2.2.9-b1
265 kes Fix to JobMedia fix.
266 kes Fix bug pointed out by Peter Much that causes the StorageId to
267 be updated when reading a tape (during migration, it could have
268 been incorrectly set to the write StorageId).
270 kes Implement autostart scripts for Debian
272 kes Fix mtx-changer.in for broken Debian mt program.
274 kes Massive commit of all fixes and back ports to create 2.2.9
276 kes Apply doc fix from bug #1062.
277 kes Resolve crash and improper restore wx-console Win32 restore
278 GUI. Fixes bug #1065.
279 kes Update Win32 wxWidgets to latest version.
280 kes Attempt to do correct handling of Win32 mount points. Should
282 kes Fix Win32 FD backup/restore memory leak due to improper termination
283 of BackupRead/Write. This fixes bug# 1038.
284 kes Add const to AIX prototype for initgroups()
286 kes Undo bug #1047 heap overrun fix as it is not correct.
288 kes Fix creating first JobMedia record during Migration to include
289 proper index. This caused slow restores of migrated jobs.
291 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
292 and do not strip paths on symbolic links.
293 kes Set catalog backup database and user name from values specified on
294 the ./configure line.
295 ebl Apply patch to correct bug #1031, about wrong pool source information
298 Release Version 2.2.8
300 kes Apply patch from Martin to correct bug #1040, bscan sets existing
302 kes Fixed important spelling error in doc -- bug #1045.
304 kes Move initialization of read/write res lock earlier in the code.
305 This fixes the crash with a null conf file. This fixes bug
307 kes Redefine CURES in lib/parse_conf to be URES and move it all
308 into lib/parse_conf.c -- this responds to bug #1042, but does
309 not fix it. The fix is not to compile with FORTIFY_SOURCE.
310 kes Backport fix de-referencing a NULL pointer in the scanner from
311 the trunk SVN. I don't think this was reported as a bug.
313 Beta release Version 2.2.8
315 kes Re-enable the new job code editing (%f).
317 kes Fix bsnprintf for float point numbers. I broke recently when
318 parameterizing some variables. This fixes bug #1036.
320 kes Move Heartbeat documentation from Job to Director resource.
321 This fixes bug #1033.
323 kes Fix existing switch drive SD code to call autochanger to release
324 any old volume. This must be done to keep the autochanger from
325 releasing subsequently newly reserved volumes in doing a close().
326 This should possibly fix bugs #1032 and #1018.
327 kes Apply big backport of current SVN SD code that corrects a number
328 of race conditions. This is a first step in fixing bug #1018.
330 ebl Fixes bug #1028 where "Selection Type" option was not usable
334 Release Version 2.2.7
336 kes Partial back out (disabled) %f job code editing because it
337 does not build on Win32.
338 kes Fix seg fault Frank Sweetser reports in regression testing
339 on his systems. The problem was that the original author of
340 bsnprintf.c did not take into account the side effects of
341 using ++x in the argument to a #define.
343 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
344 that implements double quoting include names in conf files,
345 and also allows piping input by having the first character
346 be a vertical bar (|).
347 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
348 that implement %f in RunScripts to pass the FileSet name.
349 kes Skip leading | when lex input comes from a pipe as suggested
350 by Michael Stapelberg <michael@stapelberg.de>.
352 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
353 Nerijus Baliunas <nerijus@users.sourceforge.net>
355 kes This patch corrects a problem where the maximum concurrent storage
356 jobs counter gets out of sync during restore jobs causing jobs to
357 'wait on max Storage jobs'. This patch fixes bug #1009.
359 kes Add new include to postgresql.c suggested by Marc Cousins so
360 that it compiles correctly with pgre version 8.3. Also fix
361 misuse of %x with pointer (should be %p).
363 kes This patch fixes bcopy so that it produces correct Volumes.
365 kes This patch eliminates spurious output to the console during a VerifyVolume
366 job that contains encrypted data. It fixes bug #1024.
368 kes This patch prevents the 'status dir' command from trying to use a scratch
369 volume and possibly moving it from one pool to another. This patch fixes
372 kes Fix --archivedir addition to configure. Replace it with
373 --with-archivedir in configure.in This fixes the regression
375 kes This patch fixes bug #1012 where the job is canceled because
376 of Max Run Time exceeded when the job has not yet started.
378 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
379 one 'part' to write. Instead of each part being stored on disk,
380 written to DVD, then deleted from disk, all parts are written to disk,
381 and only the last is written and deleted from disk.
383 kes Correct typos in disk-changer.in
385 kes This patch fixes the status command to include the formating string for
386 JS_AttrInserting. It fixes bug #1021.
387 kes This patch should fix the Mac OS X build problem on the latest
388 Darwin, where sys/types.h was not included correctly (apparently
389 due to a change in the Mac headers). The solution was to explicitly
390 ensure that it is defined for the ./configure.
391 This patch also has a rebuild of configure that includes the Debian
392 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
393 kes This patch should ensure that queued messages to the console are
394 displayed as soon as possible. It should fix bug #1007, but has been
395 reported not to work.
397 kes This patch fixes the infinite loop when trying to increase the
398 maximum number of volumes in a Pool during the add command.
399 This patch fixes bug #1008.
401 Release Version 2.2.6
403 kes Get fix for joblist bug in bat from trunk.
405 kes This patch fixes bug #1003 where putting the message output from
406 a Verify job into the catalog results in a recursive loop. The problem
407 seems to show up only with postgresql (to be verified).
409 kes Fix bug #942 where lots of emails where generated when the heartbeat
410 interval was low and Bacula wanted a different tape from the one in
413 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
414 which was updated during a restore (or a reading migration) bug #982
416 ebl Use qmake-qt4 instead of qmake when available (debian system).
418 kes Add a security warning to src/cats/make_catalog_backup.in indicating
419 that passing the password via the command line (arg 3) is insecure.
420 This responds to bug #990 (it doesn't fix it).
421 kes Apply 2.2.5-postgresql-errors.patch
422 kes Remove unneeded File table index on JobId, which is already
423 present as the first index of another multi-index.
425 kes Set default debug_level to zero. This corrects bugs #991 and #993.
426 kes Fix a crash in bat when it cannot connect to the Director for example
427 if the Director is not running.
429 kes Activate Close button on tray-monitor window. This fixes
432 kes Fix spurious warning message printed when creating a volume with
433 a LabelFormat. This fixes bug #976.
435 Release Version 2.2.5
437 kes Add JobId in place of Job name in all the Jmsg() output.
438 kes Correct the APP_DESC for the Win32 storage service (remove an e).
440 kes Add new SD despooling attributes and Dir inserting attributes
441 job status codes. This fixes bug #961.
442 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
444 kes Fix doc issue. This fixes bug #963.
445 kes Fix listing performance problems in bat. Pointed out by
447 ebl Fix replace on restore. This fixes bug #969
448 kes Fix bat code that tests for Win32. This should fix bug #968
449 kes Query 5 list wrong Vol after migration. This fixes bug #960
451 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
452 in back porting from 2.3.x
454 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
455 The details are included in the notes in this file.
457 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
458 messages; it fixes a problem opening the SQLite3 database when multiple
459 simultaneous jobs were running; it fixes a bug with certain versions of
460 MySQL where batch inserts failed because of table name character case
461 (upper/lower) differences.
462 kes Fix race condition that drops final block written to volume.
463 This happens in rare cases with multiple simultaneous jobs
464 when the Volume fills. This fixes bug #964. May be related
465 to bug #935 and possibly #903.
467 kes Fix FD->SD authorization failure, which was due to spurious
468 wakeups from a pthread_cond_timedwait(). Simply check the
469 predicate before continuing. This fixes bug #953
470 dvl Add new configuration item --archivedir
471 dvl Adjust regression tests to use tmp not /tmp. This will allow
472 multiple concurrent runs of the regression tests.
474 kes Eliminate more strerror() and replace with bstrerror().
475 kes Remove BSD getopt and replace with unrestricted IBM version.
476 kes Fix Win32 build for changed calling sequences.
478 kes Fix FD->SD authorization failure, which was due to spurious
479 wakeups from a pthread_cond_timedwait(). Simply check the
480 predicate before continuing. This fixes bug #953.
481 kes Add const char where needed (more to do).
483 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
484 kes Don't overwrite error message in check_tables_version.
486 kes Unlock batch insert tables with same calls used elsewhere.
487 kes Allow starting 59 jobs a second.
488 kes Make SD session key more random.
489 kes Add retry for SQLite opening db if it fails. Probably helps
491 kes Suppress extra error messages during batch insert failure.
493 kes Put some FD auth code on dbglvl rather than fixed.
494 kes Return insert attributes error message in db msg buffer to avoid
495 false error messages. Helps fix bug #966.
496 kes Separate batch init error messages. Probably helps fix bug #966.
497 kes If Dir gets an error during inserting attributes, cancel SD.
498 This reduces unnecessary error messages.
500 ebl Cleanup batch insert code. Probably fixes bug #965.
502 kes Turn off some code when batch insert not enabled.
503 kes Edit FD name in connect error messages.
505 kes Add code to handle tray monitor separated from Win32 FD.
506 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
508 kes Fix ANSI tape labeling. This fixes bug #954.
509 kes Increase the max block size to 4MB fixes bug #957.
510 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
511 is not properly mounted (recognized) during a poll.
512 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
513 Job that has differences reports Verify OK.
514 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
516 Release Version 2.2.4
518 kes Increase size of name string when FD making connection to SD.
521 kes Add waits to multiple exit detection code to try to force pid
522 file to always be deleted.
523 kes Restore good dev.tar.gz to rescue set appropriate binary property.
525 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
526 trying to switch drives by checking for blocking before unblocking.
528 kes Cancel storage daemon in all cases where FD reports error. This
529 should fix virtually all cases of bug #920.
531 kes Fix error message that was clobbered when Dir tells SD it does not
532 have write permission on Volume. This should fix a minor point
533 in bug #942, but not the main problem.
534 kes Add code to cancel job in SD if FD connection fails. This should
536 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
537 kes Fix migration code to get correct Volume name with multiple volumes
538 by skipping |. Fixes bug #936.
539 kes Implement patch supplied by Landon to fix bug #944 where using
540 TLS with bconsole uses 99+% of the CPU.
541 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
543 kes Move patches into patches directory.
545 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
548 ebl Using 'm' in bconsole will show messages like before,
549 and not memory usage.
551 Release Version 2.2.3
552 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
555 kes Fix bug #935, and probably also bug #903 where files were not
556 restored. MediaId was not properly set in JobMedia record after
559 kes Add ./configure search in qwt-qt4 for qwt package
560 kes Apply Martin Simmons patch that should turn off the new API usage
561 when batch insert is turned off allowing building on older
564 Release Version 2.2.2
566 ebl Detect if new PosgreSQL batch insert API is present.
567 kes Correct incorrect mempool call causing Director crash.
568 sb Update spec files for 2.2.1 release
570 Release Version 2.2.1
572 kes Update POTFILES.in
573 kes Cleanup a few underquoted AC_DEFUNs in configure
574 kes Apply patch from Martin Simmons that adds a test for va_copy to
577 kes Fix bug #921 by increasing the number of tries to create a new volume
579 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
580 can be called multiple times. Implement a version for machines
581 without va_copy() that gets a big buffer.
583 kes Integrate more portable zone offset code into bsmtp.c
584 Submitted by Attila Fülöp.
586 kes Fix bad SD->FD return status reported by
587 (James Harper) <james.harper@bendigoit.com.au>
588 ebl Fix a bug in read_close_session which return random status
589 thanks to James Harper
591 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
592 and directory names during restore of single file/directories.
593 kes Add sanity checks to .sql command when string is empty. Hopefully
594 that will resolve Dirks Director crash.
596 kes Apply patch submitted by Martin Simmons that corrects a seg fault
597 in the bsmtp chat subroutine when debug is >= 10.
599 kes Fix Director crash when running bat SQL queries.
600 kes Add David's notes on Item 8: Copy pools.
602 kes Rework projects file to be current and ready for a vote.
603 kes Enhance lex scanner error message.
605 kes Tweak LICENSE file to mention BSD code.
606 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
607 if specified on the ./configure.
608 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
609 This class is intended to allow us to open a second bsock to the
610 Director while in the restore subdialog.
612 kes Fix configure to create bat Makefile before creating dependencies.
613 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
614 kes Add a tooltip to the tray monitor.
615 dvl Set the Director's PID file before dropping privs. This fixes
618 kes Update AUTHORs file
619 kes Increase the default max concurrent jobs to 20 in FD and SD to
620 correspond with the default .conf files.
621 kes Rewrite the Win32 service routines. This eliminates the 3 copies
622 some different, of the same file created by RN when porting the
624 kes Rearrange some of the Win32 directories and the placement of the files
626 kes Set DEVELOPER flag in version.h
628 ========================================================================
629 Release Version 2.2.0
631 kes Apply a second doc patch from Marc.
632 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
633 improves the tips section that discusses how to setup multiple
636 kes Update bat README file.
637 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
638 corrects a typo in the Recycle status check in db_find_next_volume().
639 This will probably fix a number of annoying problems with multiple
641 kes Modify most of dird/msgchan.c to use bsock class calls rather than
642 bnet calls -- no functionality change.
644 kes Modify the Verify output to specify if files are missing on
645 the Volume(s) or disk. Fixes confusion in bug #916.
646 kes When more than one Volume is read in a migration job, the last
647 Volume bytes reported are from the last read volume rather than
648 the last written volume. Fixed. This fixes bug #910.
649 kes Fix display of Recycle flag after update volume=foo recycle=yes.
650 It previously printed New Recyle flag is: no. This fixes bug
653 kes Correct seg fault when switching tape drives during restore.
654 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
655 be used until after 2.2.0 release.
657 kes Remove fnmatch() in SD that permitted wild card specifications.
660 kes Fix %g in filename returned by SQL for browse tree reported by
662 kes Fix configure so that it puts config.out in the cwd rather than
664 kes Attempt to fix the locking problem reported by Eric in bug #906.
665 kes Make berrno class to leave errno unchanged after constructor call.
666 kes Make bnet_server use the heap rather than the stack to allocate
667 its socket fd pointers to avoid a crash at termination. Problem
668 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
670 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
671 and putting it in depkgs-qt along with Qt4.3.
673 kes Rework code in acquire.c that switches drives for reading when
674 the Media Type does not match. This should fix bug #906
676 ebl Fix a director segfault during job setup #907
677 kes Correct seg fault in postgresql when first operation returns no
678 rows. Fixes Dirks File browser problem seg fault with bat.
680 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
681 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
684 kes Implement PopUp YES/NO dialog for bat.
686 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
688 kes Correct RunScript to terminate job in FD on failure.
689 kes Change abort_on_error and AbortJobOnError to fail_on_error
690 and FailJobOnError in RunScripts.
691 kes Minor tweaks of code formating in RunScripts, principally to
692 avoid depassing 80 columns.
694 kes Eliminate one #ifdef Win32 in bsmtp
695 kes Implement grow tool to grow a file for testing very large databases.
696 kes Add big-vol-test to test Bacula seeking with > 5GB.
699 kes Modify find_next_volume() to return all values in Media record.
700 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
704 kes Update Release notes
706 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
707 Warning, in previous beta version, all media get from scratch keep their
710 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
711 This should fix bug #842. Made a note to look at removing the temp
712 files at the end of the install.
713 kes Add ability to mount and unmount a file device providing it is
714 marked as being removable and has the appropriate mount and unmount
715 commands defined in the Device resource. This fixes bug #830.
716 kes When applying a storage override, release all previous storage
717 definitions rather than just prepending the new storage.
718 This should prevent a good deal of confusion.
720 kes Implement ./configure search for qwt libraries.
722 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
723 Win32 FD. This should fix bug #893.
724 kes Remove an unnecessary beep in Win32 init code.
725 kes Update copyright dates in Win32 executable about boxes.
726 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
727 code with a BSD getopt.c and getopt.h.
728 kes Remove sched.h from the Win32 compat directory -- not used.
729 kes Remove the Exit menu item from the Win32 tray monitor. If you really
730 need to shut it down, do it through the services panel or the command
732 kes Remove some inappropriate Bacula FSFE copyrights.
733 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
734 kes Fix regress config non-portable test as pointed out by
735 Florian Heigl <florian.heigl@gmail.com>
736 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
737 as pointed out by Florian Heigl <florian.heigl@gmail.com>
739 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
740 Reported by Frank Sweetser.
744 kes Fix client-only build.
745 kes Integrate client-only fixes for bsys (initgroups) and conio from
746 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
747 kes Make arguments to get_scratch_volume() in same order as other
749 kes Rework the prune_volumes() subroutine so that after purging and
750 no volume found in desired pool, it will check for a scratch
751 volume. This prevents recycling the whole scratch pool.
752 kes Add code to status storage to print boffset_t (largefile support).
754 kes Move qwt (Graphics libarary for Qt4) to depkgs.
755 kes You now need a --with-qwt=<dir> to be able to build bat.
756 kes Update src/win32/cats/bacula_cats.def to include the new
757 db_get_query_dbids() call on Win32.
759 kes Correct a problem when selecting a scratch volume and moving
760 it to another pool that lost some columns.
761 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
762 kes Enhance Autochanger error messages to include Volume and device name.
763 kes Rework prune_volumes() code to take account of InChanger flag,
764 and to handle recycling volumes going to the Scratch pool and
765 current pool because the RecyclePool directive.
766 kes Implement a better and more efficient db_get_query_dbids() to
767 handle creating and passing back a list of DBIds.
771 kes Start work on new more efficient DBId subroutine. First use
772 will be for recycling volume to Scratch inchanger.
773 kes Increase number of JobIds in pruning from 1000 to 10000.
774 This to be replaced by above routine.
775 kes Begin implementation of building Qt4 on Win32.
776 kes Correct typo in fix I added for bad TLS shutdown.
777 kes Pull 2.0.3 patches into patches directory.
778 kes Update Release notes. Include qt-console in line count.
779 kes Update Projects file.
781 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
782 bug in migration code where a job that spanned two volumes
785 kes Implement new BST_DESPOOLING blocked state. Change from locking
786 during despooling in SD to blocking. This means that other threads
787 can work with the device structure, in particular the reservations
788 system while despooling.
790 kes Fix return in reservation message queue that missed clearing
791 the jcr lock (implemented 26Jun07 below).
792 kes Rename a number of dev methods to make locking function names
794 kes Document locking in lock.c. Move lock structures to new file
797 kes Move reservations message lock to lock jcr only this
799 kes Move main SD locking code into lock.c (new file).
800 kes Update Win32 build to include lock.c
804 kes Dirk committed the qwt library code for drawing graphs in bat.
805 kes Tweak install of qwt so that it is integrated with ./configure.
807 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
808 out by Eric (my typo).
809 ebl Fix configure.in to get batch mode enable
810 kes Return correct string from authenticate.cpp in bat when connecting
812 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
813 spurious line drops when using TLS.
814 kes Do not file reparse points when restoring a file that already
817 kes Implement Windows reparse points -- similar to directories, but
818 we do not descend into it. This is a first cut. They seem to
819 be backed up, but restore is not yet tested.
820 kes Remove restore_blocking in tls code when shutting a socket to leave
821 it in blocking mode. Hopefully this will fix the encryption bug
822 reported by Frank Sweetser.
823 kes When opening a file for backup, tell the OS that we are going to
824 read it sequentially -- optimization.
825 kes Change variable names in authenticate_director() to not conflict
826 with member names in bat. Caused great confusion with compiler,
829 kes Queue openssl error messages in case of comm problem.
830 kes Do shutdown() call if socket terminated.
831 kes Remove some duplicated code in tls.c
832 kes Move more of the bsock member variables into private and access
834 kes Add Frank Sweetser's tls-test to the regression suite.
836 kes Add Swedish sv.po file
838 kes Don't print clock skew message in FD if less than 3 seconds diff.
839 kes Add a bit of VSS info to status client.
840 kes Implement a first cut of Vista VSS, using Win2003 code.
844 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
845 loaded tape but uses first drive).
846 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
847 This was indeed a Win32 issue.
849 kes Simplify search of autochanger for in-use Volume.
850 kes Fix exit condition of check for in-use volume. kes Remove
851 inappropriate my_postgresql_free_result() in db_close()
853 kes Fix bad return in FD when encryption signature not found.
854 Probably caused a crash.
855 kes Inhibit missing encryption signature error messages for
856 file types where no signature computed.
857 kes Correct inverted check on autochanger in reservation system.
858 kes Tweak debug code in autochanger reservation.
860 kes Add some additional locking in the cats directory in subroutines
861 that modify packet variables called from batch insert.
862 kes Rework how dcrs are allocated. new_dcr() can now be called
863 with an existing pointer, and it will simply clean it up.
864 This allows the reservation system to test various different
865 devices, and will permit easy device changes.
866 kes A bunch of changes all over to handle new new_dcr() calling
868 kes Work more on the Volume management in the SD. Remember Volumes
869 for tape drives and for autochangers (even virtual disk changers).
870 kes When looking at the Volume list to reserve a drive, handle
871 autochanger names correctly by interating through the changer
872 devices. Also call the Director to see if a Volume is suitable
874 kes Fix some bugs in bscan. Make sure all media records are written.
875 Make sure that valid JobMedia records are written for disk files.
876 Previously they were completely wrong.
877 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
878 that the URLs don't change and so that the developers will all
879 work off the same copy. Rebuild from scrach.
880 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
884 kes Fix seg fault in FD from incorrect digest size.
885 kes Fix argument to non-OpenSSL crypto.c subroutine.
889 kes Remove a few malloc()s from the encryption code.
890 kes Use the class calls to bsock in filed/backup.c and restore.c in
891 place of the old bnet_xxx code.
892 kes Implement code that does an on the fly calculation of the
893 signing digest during restore of encrypted files. It makes
894 a best guess at the algorithm, and if it is not correct, will
895 then revert to the old code which reads the file after it is
897 kes Implement at least one missing crypto stream in stream_to_ascii()
898 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
899 #877 where a reload with bad syntax causes Dir to exit.
901 Cut: 2.1.14 beta (not released)
903 kes Do not free a volume on a tape drive until another volume is
904 mounted and read, or the autochanger unloads the volume.
905 This should help the SD re-use volumes that are already mounted,
906 and should fix bug #886.
907 kes Apply patch from user brettedgar that allows gnome2-console include
908 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
909 kes Apply patch from Lucien Weller that fixes day of week calculation
910 because of DST flag problem. Fixes bug #887.
912 kes Move find_next_appendable_volume() to after acquiring a valid device
913 in reserve.c. This fixes bug #864 -- confirmed by reporter.
915 kes Unable to reproduce bug 872. However added additional testing for
917 kes Bug #874 resolved by documenting SQLite limitations.
918 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
919 kes Bug #881 resolved by removing typo in mtx-changer script.
920 kes Made Frank Sweetser's wiki the official Bacula wiki with his
921 approval. Added a link to the wiki on the web page, and implemented
922 a backup from http://paramount.ind.wpi.edu
924 kes Fix update allfrompool to pass pool name.
926 kes Convert to pure GPL v2 license.
927 kes Fix sscanf problems reported by Peter Buschman that caused
928 a bus error on Solaris.
929 kes Rework (simplify) the select prompt in bat.
930 kes Move get_jobid_from_tid() into lib and create a
932 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
933 should definitely fix the problem of lost error messages in the
935 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
936 kes Eliminate tcpd.h from the project. Enclose the #include from the
937 library with extern C ...
938 kes Add print of signal name when a signal is trapped.
942 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
944 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
945 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
946 makes SQLit3 run 30 times faster, though a bit less safe.
947 kes Implement --with-batch-insert in configure and detection of thread
948 safe libraries. It is on by default, but turned off if no thread
949 safe library (e.g. SQLite 2) is available.
951 kes Fix Bacula PostgreSQL buffer overruns.
952 kes Do better checking for NULL results returned from PostgreSQL;
953 implement retry for failed queries; clear results buffer after
954 failed query. Hopefully this will correct the PostgreSQL failures.
956 kes Implement algorithm to handle only one appendable volume with
957 Prefer Mounted Volumes = no.
958 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
959 returned from a query.
960 kes Make volume lock recursive.
961 kes Implement an additional volume reservation algorithm that
962 starts by considering all reserved volumes then uses the
963 old brute force algorithm of searching the resources to
964 find a suitable device.
965 kes Add new reservations debug code and refine the old code.
966 kes Update the win32/dll/bacula.defs file.
968 kes Tweak reservations algorithm to permit a few more cases, i.e.
969 volume reserved, but on different drive, ...
970 kes Enhance SD status to include Pool and Media Type for drive in a
971 more readable format (a bit longer).
972 kes Fix PostgreSQL double free.
974 kes Minor refactoring of restore decryption code.
975 kes Add code to smartall.c to detect double free of a buffer.
977 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
978 so that bsmtp will create a correct email address (mailbox only).
979 kes Modify 'memory' command so that the buffers are listed as 'In use'
980 to avoid confusion with Orphaned buffers.
981 kes I reworked the OpenSSL include/lib flags to be handled in
982 the standard Bacula way, which should fix bug #863 concerning
983 non-standard OpenSSL libraries.
985 kes Implement Help Browser window for bat.
986 kes Fix reload bug that reset StorageId to zero.
988 kes Fix TLS #ifdefing when TLS turned off.
989 kes Ensure that when labelling a tape with Slot=0 that InChanger
991 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
993 kes Add StartTime to final uar_sel_jobid_temp query so that we can
994 add DISTINCT (required by PostgreSQL).
995 kes Implement BSOCK authenticate_director() method. Eventually will
996 authenicate all daemons.
997 kes Move several more functions into the BSOCK class.
999 kes Add code to tell the OS that we no longer need a cached
1000 file that we were reading. In findlib/bfile.c. Also,
1001 only cache files that we are reading. Thanks to
1002 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1003 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1004 kes Implement script to automatically generate cats and dll .def
1005 files for Win32 dll.
1006 kes Update README.mingw32 to include new .def file generation.
1007 kes Correct typo in UTF-8 error message as reported by:
1008 jhernandez <julianhernandez@gmail.com>
1009 kes Add additional sm_check() code on debug level 1.
1010 kes Set default debug level to 1.
1011 kes Trap SIGABRT in attempt to get traceback.
1013 kes Reduce bat connect timeout from 30 to 15 seconds.
1014 kes More restructuring and implementing BSOCK class in place of
1016 kes Remove a few unnecessary malloc() tests in crypto code.
1017 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1018 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1019 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1021 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1023 kes Fix Verify InitCatalog. The attributes were not pointing to the
1024 correct saved location.
1025 kes Implement message callback so that GUI is sure to get all
1026 daemon messages. Currently displayed in a dialog in bat.
1027 kes Ignore SIGUSR2 (Bacula timer) in bat.
1028 kes Apply regress patch from bug #859 to allow regress to work
1029 with Solaris compiler.
1031 kes Begin adding TLS support to bat.
1032 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1033 clean up lex.c and make it more readable.
1035 kes Move more bnet functions into the BSOCK class.
1036 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1037 kes Complete change of berrno strerror() method to bstrerror()
1039 Release: 2.1.10 beta
1041 kes Cleanup incorrect email addresses in bsmtp.
1042 kes Make bat display initial messages rather than discard them.
1044 kes First cut of adding .mod to the run command.
1045 kes Implement auto display of messages in bat.
1046 kes Enhanced preferences to allow all Bacula output to be
1049 kes Try to make bsmtp date routines more generic.
1050 kes Fixed bug #856 autochanger documentation.
1051 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1052 kes Add new cats entry point so Win32 builds.
1054 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1056 kes Do better checking for the MySQL 64 bit libraries looking for both
1057 .a and .so libraries.
1058 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1059 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1060 kes Require the thread safe version of MySQL during configure. Thanks
1061 to Andre Noll for pointing this out.
1062 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1063 continuing in migration code.
1064 kes Apply implementation of tray-monitor font derived from gnome-console
1065 submitted by Andreas Piesk <a.piesk@gmx.net>
1067 kes Eliminate important memory loss in SQLite
1068 kes Fixed the batch insert MySQL thread specific data that was not
1069 being freed. See cats/mysql.c:db_thread_cleanup().
1070 kes Fix restore before command.
1071 kes Convert old hdr.name to name() in a few places.
1072 kes Implement update jobid command.
1073 kes Return all time_t dates in db_get_job_record()
1074 kes Stop watchdog in SD earlier.
1075 kes Put Pool just after Storage in please mount message.
1076 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1079 kes Update the po files.
1080 kes Fix Verify InitCatalog by making it cache attributes.
1082 kes Change name bacula-bat to bat for man 1 page to correspond to
1084 kes Check for client and store NULL pointers in status command. This
1086 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1087 kes Fix sign extended editing of %p.
1088 kes Clean out a little old #ifdefing in cats/mysql.c
1090 kes If time diff between DIR and FD is more than 600 seconds convert
1091 INFO message to WARNING.
1092 kes Implement heap size display in status for all daemons.
1093 kes Attempt to fix MySQL db open memory loss (not successfull).
1094 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1095 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1096 Query. This looks like a MySQL but but by doing extra releases,
1097 the memory goes away. This should fix bug #847.
1099 kes When backup fails, cancel SD before waiting for sd termination.
1100 kes If SD is waiting for FD to connect during cancel, wake up the
1102 kes Fix fsf code so that errno is correctly reported.
1103 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1105 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1106 so that Bacula doesn't later stumble into a seg fault.
1107 kes Use the term Restore Client in the restore Job report.
1108 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1109 the original job's FileSetId.
1110 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1111 spooling in migration jobs. Not yet tested.
1112 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1113 reading conf file from a pipe. However, do it with open_bpipe()
1114 rather than popen. Not yet tested.
1116 kes Fix an ugly bug where the VolCatBytes were getting updated
1118 kes Implement bconsole memory command that prints current memory
1119 usage, plus smartalloc dump.
1120 kes Clarify some error messages in backup, admin, and migrate.
1121 kes Shrink label dialog to smaller size.
1122 kes Invert Cancel OK buttons on restore to be OK Cancel.
1123 kes More strerror() to bstrerror() conversions.
1125 kes Start implementing bstrerror() in place of strerror().
1126 kes Stripping path -- seems to work.
1128 kes Prevent door and port files from being restored (mostly
1130 kes Free an unreleased buffer in compat code.
1131 kes Change console Job name from *Console* to -Console- to eliminate
1132 Win32 filename problems. Put Win32 path separator when creating
1133 Console file. This fixes bug #846.
1134 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1136 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1138 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1139 to force Win32 error message.
1141 kes First cut strip path. The data should be passed to the FD,
1142 but nothing is done with it yet.
1143 kes Enhance the digest and signature routines in the crypto
1144 library to accept a JCR and to use it to print error messages
1145 so that they will go in the Job report rather than the daemon's
1147 kes Simplify some of the verify signature code.
1148 kes Simplify a few of the alternative returns in the signature
1151 ebl Use only POSIX regex instead of GNU regex in breg.c for
1152 File relocation. It fix broken freebsd compilation.
1153 kes Convert all other Dir files to use new ua class message
1155 kes Tentative fix for missing digest signature in bug 807.
1156 kes Correct handle problem in new win32_ftruncate routine.
1157 kes Convert ua_purge.c and ua_update.c to use new ua class
1158 message routines for bat.
1160 kes Correct incorrect installation of LICENSE in Win32 installer.
1161 kes Display LICENSE at the beginning of the Win32 install.
1162 kes Attempt to correct the need for the png files to be installed
1164 kes Reapply my bat.conf install script in qt-console. I think I
1165 editted bat.pro instead of bat.pro.in and it was lost.
1166 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1167 the /var/lock/subsys for subsysdir. Also corrects typos in the
1170 kes First cut update job.
1171 kes Correct configure to include qmake of src/qt-console directory.
1173 kes Make restore job yes/mod/no print in one command so GUI works.
1174 kes First cut implementing backup and restore client.
1175 kes Correct editing in Verify output that caused a seg fault.
1177 kes Insure that bat.conf is not overwritten during installation.
1178 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1179 while I was implementing migration in March 2006 !
1181 ebl Cleanup file relocation, using char *RegexWhere instead of
1182 char *where + bool where_use_regexp
1183 kes Update some manpages and add bat manpage.
1184 kes Make a first cut at converting bacula.spec.in for bwx-console
1186 kes Apply patch from John Goerzen to add hostname as fourth argument
1187 to make_catalog_backup script.
1188 kes Fix typos I introduced into bsmtp.c
1189 kes Make pm_strxxx() routines handle input of NULL pointer. This
1190 is to protect from NULL pointers returned from SQL databases.
1191 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1192 kes Add more debug to FIFO code -- fix fifo regression test.
1194 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1195 kes Add thread timer to bnet_connect() to break from OS if wait time
1198 kes Update Win32 build to include new files, new symbols, and
1200 kes Implement socket level heartbeat (tcp_keepidle)
1201 ebl Commit File relocation patch
1202 kes Make bat have 'make install' target.
1203 kes Warn during install if old gnome-console binary found.
1204 kes Warn during install if old wx-console binary found.
1205 kes Add -8 option to bsmtp command line to add content type utf-8.
1206 Fixes bug #809. (Character coding problem in bsmtp).
1207 kes If < is found in target (from, to, cc) then do not enclose the
1208 target in < > in bsmtp. Fixes bug #772 (malformed address).
1209 kes When printing certain items in dbcheck, stop after 300000.
1210 Fixes bug #822. (dbcheck loops).
1211 kes Incorrect status in Dir after waiting for mount with poll set.
1214 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1216 kes Print waiting to reserve a device every 5 mins.
1218 kes Don't call close_part in label.c if tape and relabel.
1219 kes Don't free volume if busy in close() -- should help with
1221 ebl Fix #824 RunScript bug (After script could be execute twice)
1222 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1223 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1224 Add a regression script to test RunScript
1226 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1229 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1230 deprecated. No additional bugs will be fixed, and they will be dropped
1231 in a future release (probably 2.4.0).
1232 kes Change name of wx-console to bwx-console to make it more Bacula
1234 kes Change the name of gnome-console to bgnome-console to make it
1237 kes Some time in March, a Feature Request with patch from Jorj Bauer
1238 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1240 The ability for the director to validate a Client (FD) CN against
1241 an arbitrary set of patterns rather than the hostname, with
1242 A new 'TLS Allowed CN' set of directives which are implemented
1243 in the Client resource. Then pattern matching is used in place
1244 of hostname matching against the Certificate's CN. As an example, we
1245 have certificates which (a) use a local CA, and (b) have a CN of the
1247 kes Add new/changed entry points to Win32 build
1248 kes Create unaccepted-projects for projects that are not accepted.
1249 kes Simplify locking in the reservations system.
1250 kes Add more debug code in reservations.
1251 kes Make sure error condition on reserving a volume is handled correctly.
1252 kes Correct handling of volume_in_use.
1253 kes Correct handling of initializing a device.
1254 kes Move handling of broadcasting releasing a device into release_device().
1255 kes Correct attaching dcr to dev so that it is only done if device
1256 is properly initiated.
1258 kes Locking debug level tweaks in SD.
1259 kes Tweak new Volume code.
1261 kes Add exec external-command [wait-seconds] to bconsole. This
1262 executes the external-command. Note! normally external-command
1263 should be enclosed in double quotes.
1264 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1265 it should normally be off in a production system.
1267 kes Implement die command for SD so that we can force it to dump.
1268 kes Implement SD lock debug code.
1269 kes Implement new algorithm for keeping Volume list in SD. It
1270 is now owned by the device.
1272 kes Implement new code for freeing in use volumes that should
1273 resolve if not all, some of the problems of multiple drive
1274 tape conflicts described in bug 801.
1276 kes Fix gui/bacula-web/images files in svn.
1277 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1279 ebl Fix a bug in batch mode (in string escape)
1280 kes Correct migration prune SQL typo that crept in in a
1281 recent 2.1.x change.
1283 kes Move bnet_despool() into class in bsock.c
1284 kes Modify job report to include director name and Build OS.
1285 kes Move drop root privilege and check_catalog() before fork.
1286 kes Add update database scripts (version 9 to 10) to updatedb directory.
1288 ebl Check size and age of each file after its backup to see if
1289 it has changed during backup, if 'checkfilechanges' is set.
1290 The FD will do an extra check (stat(2)) after
1291 each file backup. mtime, ctime and size are compared with
1292 'before backup' information. If time or size mismatch, an
1293 error message will be generated. You must upgrade FD to use it.
1295 kes Make database name and user configurable
1296 --with-db-name=xxx --with-db-user=xxx
1297 kes Add back database type to message.c for debugging.
1299 kes Implement dir_sql() which issues an SQL query.
1300 kes Modify bat medialist to use dir_sql() and do some minor C++
1301 formatting as well as eliminating a number of pointers, simplifing
1304 kes Fix some of the mtx-changer grep commands for tape label readers.
1305 kes Convert a number of bsendmsg into the appropriate send/warning/error
1306 message class calls.
1307 kes Suppress the using database message in the .sql command.
1308 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1310 kes Add context menu for floating a window.
1311 kes Some minor cleanup and name changes in qt-console
1312 kes Add doing mt setblk 0 in Win32 mtx-changer.
1313 kes Apply Martin's bug fix to move definition of ENODATA for
1315 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1316 sqlite2 and sqlite3.
1318 kes More pruning cleanup.
1319 kes Turn on wait_for_drive by default in mtx-changer.
1320 kes Turn on Batch insert code by default as it now passes regression.
1321 kes Add ./configure --enable-bat to enable building of Bat.
1322 No install yet though.
1324 kes Implement a new .sql command for bat.
1325 kes Implement code to turn off pruning in obtaining the next volume.
1326 Pruning is turned off for the status dir command, but turned on
1327 for SD requests and for the list nextvolume command.
1329 kes Correct Qmsg() that was not updated correctly when committing a
1330 previous change (probably the recent TLS patch).
1332 kes Write new subroutine is_volume_purged() that explicitly checks
1333 if the Volume is purged, and if so marks it as such. This should
1334 resolve problems reported about needing to mount twice to recycle
1336 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1337 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1338 amount of duplicated code.
1339 kes Do volume pruning only for the Media Type desired (reduces pruning time
1340 if multiple Media Types are in the same pool).
1341 kes Implement more detailed info in the Job report for the Bacula version
1343 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1345 ebl Add bbatch tool to bench database and insert mode.
1346 Fix sql quote stuff in batch mode
1347 Fix sql stuff for mysql
1349 kes Correct problems with am/pm scheduling. Fixes bug #808.
1350 kes Implement new prunning code that prunes up to 1000 jobs at
1351 the same time. The same technique can be applied to a number
1352 of other prune/purge subroutines.
1353 kes Add an insanity check when starting a new tape job to ensure
1354 that the tape position has not been changed. If so fail the
1356 kes Fix Win32 build for dlls to add the folllowing:
1357 src/lib/bsock.c -- new file with new entry points
1358 src/lib/dlist.c -- new entry points
1359 src/cats/sql_create.c -- new entry point
1360 src/cats/sql_cmds.c -- new DATA item exported
1362 ebl batch mode cleanup bscan-test is ok now.
1363 kes Implement SD code to check length of disk volume before appending.
1365 kes Correct return status on db_batch... routines.
1366 kes Add call to db_write_batch_file_records() to migration code.
1367 ebl Fix AfterJob timing
1368 kes Move the checking of the database in initializion of the Director
1369 to after we drop privileges. This avoids the need for both root
1370 and bacula access to the DB.
1371 kes Correct a misplaced variable definition in src/filed/backup.c
1372 kes Correct how the new batch insert db_create_attributes_record()
1373 uses the arguments. Caused a seg fault in bscan.
1374 kes Implement lock() and unlock() methods in DEVICE class.
1375 Implement block() and set_block(xx) methods in DEVICE class.
1376 kes Modify bnet_connect() so that it uses time() to check for the
1377 wait time expiring (on some OSes, some system calls may not
1378 return immediately).
1379 kes Modify Verify to obtain the previous JobId when it is actually
1380 running rather than at schedule time (as it was in 1.38.x).
1381 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1383 kes When checking pid in pid file, continue running if the pid is
1384 the same as ours. This occurs on IRIX after a system crash.
1387 kes Extend new GUI API.
1388 kes Make the ua structure a class, and implement send_msg(),
1389 error_msg(), warning_msg(), and info_msg().
1391 kes Apply fix from for building wx-console on the Mac from
1393 kes Implement new select mechanism for GUI programs.
1394 kes Reorganize initialization of stackedWidgets in bat.
1396 kes Add updated nagios plugin supplied by Christian Masopust.
1398 kes More bat implementation.
1399 kes File migrate bug with Pool Occupancy using mediaid instead
1400 of jobids. Fixes bug #795.
1401 kes Fix orphaned buffers in filed backup and verify due to
1402 crypto buffers not freed during errors. Fixes bug #789.
1403 kes Extend new GUI api code to tree commands.
1404 kes Ensure that tree and dot commands check console ACLs.
1405 kes Permit marking directory with trailing slash.
1406 kes Allow 20 console connections (instead of only 10).
1408 kes Add smartctl call to bacula-sd.conf as an example of getting
1411 kes Modify jobq.c to let simultaneous restore jobs run. This may
1412 cause them to fail if they cannot get a drive.
1413 kes Add Client Connect Wait to Storage daemon to permit users to
1414 modify the time the SD waits for a FD connection.
1416 kes Correct virtual changer check which was backwards. This caused
1417 volumes to be unloaded into slots already occupied.
1419 kes Apply Command ACL filter to JobId list in restore command.
1420 kes Correct typeo in var.c patch.
1422 kes Don't let Bacula prune File or Job records for the current Job.
1423 kes Fix variable substitution pad + inc bug reported (with patch)
1426 kes Correct SQLite log table index as reported by Luca Berra.
1428 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1430 kes Begin implementing new comm signals for API.
1431 kes Fix a few places in lib/message.c where the open fd may
1433 kes Continue implementing lib/bsock.c (real class). Make jcr,
1434 who, host, and port private. There are new methods to access
1435 them for non-class use. This required touching a number of files.
1437 kes Add LANG=C to autoconf/randpass so it works with languages other
1438 than English. Fixes bug #788.
1440 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1442 You will not be able to generate Include/Exclude list any more.
1443 It will be fixed soon.
1444 If you want to use this, you can apply
1445 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1447 kes Restore of sockets created false error messages because Bacula
1448 no longer restores sockets, but the code was still trying to
1449 set the attributes on a non-existent file. Reported by a user.
1450 ebl finish RecyclePool feature
1451 Media will takes Pool.RecyclePool
1452 when moving from Scratch to a Pool or when user will do
1453 update volume=xxx frompool
1454 To use it, add RecyclePool = aPool to your Pool resource
1457 RecyclePool = Scratch
1461 kes Expand new BSOCK class adding signal() and new BNET signals.
1462 kes Begin enhancing the dot commands adding a new API function
1463 that returns more information and will make it easier
1464 to interface to the Director from a program.
1466 kes Make DEVICE fd private. Its new name is m_fd, and can be
1467 obtained with dev->fd() outside the class. This is the
1468 first of many DEVICE members to be made private.
1469 kes Implement Michael Renner's idea on having a virtual disk
1470 changer. I made some minor modifications (e.g. I did not
1471 implement the Virtual Changer directive, but simply set
1472 the Changer Command to an empty string.
1474 kes Implement a BSOCK send() method that writes the whole record
1475 in a single write() request rather than in two.
1476 ebl add update volume=xxx recyclepool=yyyy
1477 volume takes recyclepool from pool when using update volume=xxx from pool
1479 kes Fix encryption deblocking bug, which caused some restored files
1480 to be truncated. This fixes bug #763.
1481 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1482 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1484 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1485 ebl Use btime_t instead of uint64_t in media patch.
1487 kes Optimize the use of the database a bit in the Status dir command.
1488 Only open it when needed, ensure that if any previous database
1489 was opened, it is closed.
1491 kes Correct VolCatBytes bug from media patch.
1492 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1493 in the case of orphaned records.
1494 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1495 and File records in 300K chunks to be more efficient. This
1496 idea came from Juan Luis Frances (if I remember right).
1497 kes Apply Eric's scratch patch that moves a purged Volume to
1498 the RecyclePool. Question: how is RecyclePool set? what
1499 happens to the ScratchPool?
1500 kes Apply Eric's media patch that collects read/write media
1501 times as well as byte counts. This patch requires a
1502 simultaneous upgrade of the DIR and SD. Note, there
1503 should be some way to turn off timing. I'm not sure
1504 times are in Bacula units.
1505 kes Apply Eric's batch-insert patch.
1507 kes Update projects list.
1509 kes Implement Include/Exclude file lists in FD as dlists using
1510 the new dlistString class. This permits efficiently having
1511 large include/exclude lists and completes project Item 25.
1512 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1513 console is authorized to cancel the job. This fixes bug
1515 kes Modify SD so that the VolCatJobs medium record is updated
1516 at the beginning of a Job rather than the end. This
1517 fixes bug #775 where exceeding MaxVolJobs caused jobs
1519 kes Added a mutex around getting and setting Volume information
1520 so that multiple simultaneous jobs will single thread.
1522 Switch to using Subversion
1523 kes Remove src/pygtk-console/ from configure
1525 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1526 plus the entrypoints.
1527 kes Apply patch supplied that corrects debug print
1528 in canceling jobs for max run time. Supplied as
1529 part of bug #621, which was previously fixed.
1531 kes Test on job_canceled() and sd_msg_thread_done inside
1532 loop starting the message thread to avoid a race condition.
1534 kes Remove rl_catch_signal from console.c as it conflicted
1535 with the header definition. Fixes bug #765.
1536 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1538 kes Clarify some stored/acquire messages to indicate if the
1539 problem is with read or append.
1541 kes Fix memory leak with storage ids in cats/sql_get.c
1542 kes Terminate watchdog earlier to avoid reference to released
1543 memory -- reported by Jason Austin.
1544 kes Move closing the database from jobq.c to the director daemon
1545 termination routine. This fixes memory leaks for shadow jobs
1546 (i.e. migration jobs).
1547 kes Free up the unique jobid chain items in migrate.c. This fixes
1548 a memory leak problem.
1549 kes Convert some ugly looking for statements to use foreach_alist
1550 in findlib/find.c. This will facilitate converting the structures
1551 to use dlist (for large include/exclude lists).
1552 kes Fix a bug in the btree.c and btree.h routines, then rename them
1553 rblist and add them to be built in src/lib. Include some new
1554 methods written by Rudolf Cejka that make the code more readable
1555 (hides some of the ugly casting).
1556 kes Add set_next() and set_prev() methods which make the code much more
1557 readable. Also add a new dlistString class that facilitates storing
1558 strings in dlists. To be used in the large include/exclude lists.
1559 kes Make some trivial modifications to lib/tree.h that use rblist
1560 rather than dlist for storing the tree links. This was suggested
1561 by Rudolf Cejka. The result of this is that the restore tree now
1562 uses red-black binary trees rather than simple linked lists. This
1563 should give rather dramatic speed improvements for directories
1564 contining large numbers of directories/files (more than 10000).
1566 kes Fix maxruntime bug #621.
1568 ebl Implement the include JobID in spool file name project.
1569 kes Reorder projects file in order determined by Jan 2007 vote.
1570 kes Implement item #12 on project list -- quick release of FD by
1572 kes Fix open of SQLite3 db where user does not have write permission
1573 so that DIR does not crash. Fixes bug #761.
1575 kes Add back missing @ in Win32 Makefile.
1576 kes Change 'Device not configured to autolabel' from INFO
1578 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1579 which should restart an indefinite # of times.
1580 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1581 other DIR specifications.
1583 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1584 Fix path quoting in SQLite scripts.
1585 Fix problems with SHGetFolderPath.
1587 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1589 kes Fix Job restart on error bug that promotes an Inc to a Full
1590 backup. This should fix bug #755.
1591 kes Add qt-console and first cut of code.
1595 kes Fix Bacula->Documentation link on Win32 to point to index.html
1596 instead of bacula.html. Fixed bug #750.
1597 kes Return JobId in db_get_job_record() when JobId==0. This should
1599 kes Do not release source pointers when restarting a failed job.
1601 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1602 This *should* fix bug #747.
1603 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1606 kes Modify USTORE constructor to set an empty store_source string,
1607 and don't copy the store_source string in a cancel. Hopefully
1608 this will fix Arno's seg fault, bug #744.
1609 kes Add back code to disable conio in configure. Fixes bug #743.
1610 kes Correct the Options scanner in the FD to correctly handle
1611 SHA1 option, which was eating the next option. Reported by
1613 kes Add code to indicate when the SD is spooling, spool wait, and
1614 despooling as requested by Alan Brown.
1616 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob