1 Technical notes on version 2.4
6 kes Apply Eric's patch to ensure that autoprune does not return
7 a Volume not in the autochanger unless requested to do so.
8 kes Correct bat restore display of multiple drives. This fixes
10 kes Do find_a_volume() each time an unload is done. This
11 fixes the failure of maxvol2-test.
13 Release Beta version 2.4.1-b2
15 kes Use Qmsg() in job.c watchdog callback.
17 kes Release main control rwlock if ABORTing.
18 kes Make watchdog connect timeout queue messages rather than sending
19 directly to avoid lock conflicts with the real thread.
20 kes Remove const char that causes problems with Python, which has
21 older 'incorrect' headers.
22 kes Add const char in dbd.c to avoid compiler warnings.
24 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
25 mt. This fixes bug #1116.
26 kes Fix failure of 2drive-concurrent-test. Always read label;
27 clear_unload() only after drive is defined in acquire_for_read().
29 Release Beta version 2.4.1-b1
31 kes Back out bad src/lib/base64.c change.
33 kes Generally clean up the manual tape loading code. The main
34 conceptial change is that when a volume is marked to be unloaded,
35 its volume name is retained, and it is only marked as unloaded
36 when either the autoloader says it is unloaded or another tape
37 is read on that drive.
39 kes Fix a recycling problem with two autochangers reported in bug
40 #1106. This may also (unlikely) fix a second recycling bug as
42 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
44 kes Fix format problem in bscan output reported in bug #1105.
46 kes Copy more data when restarting a job so that run
47 overrides are kept. This should fix bug #1094.
48 kes Backport updates to jobq.c where possible.
50 kes Fix bug where SD did not ask operator if the device could not
51 be opened. Reported by Eric.
53 kes Add dbuser to DIR conf file (replaces user).
54 kes Add --with-db-password to ./configure
55 kes Fix regress to handle db_password.
56 kes Fix a couple of pedantic compiler warnings.
57 ebl Fix bug when starting a restore on a storage that doesn't
58 have the requested MediaType.
60 kes More work on word alignments -- eliminate all ints from
61 the configuration routines.
63 kes Fix bug reported by Scott Barninger where the bacula script
64 refers to scripts in the wrong directory. Needed to meet the
65 requirements of recent FHS location changes.
66 kes Fix word alignment problem on non-Intel 64 bit machines
67 such as Solaris. This should fix bug #1097 -- bus error in SD.
69 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
73 kes Update version to reflect the magnitude of the SD changes.
75 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
78 kes Add create_postgresql_database.sql to Win32 installer. Should
79 fix problem reported by Juilio Monteiro.
80 kes Get correct slot when auto unloading a device. This fixes bug
83 kes Fix multiple media restore.
84 kes Make DEVICE Slot private and access it via a method.
85 Allows better control over when it is set and cleared.
86 kes Fix possible seg fault if SQL error.
88 kes Add debug code to SD.
89 kes Fix renaming a Volume, which used the wrong Volume name.
91 kes If operator has rewind tape, print warning, release tape and
92 try once more. If tape is positioned somewhere, something went
93 wrong, so mark the tape in error and try once more. Previously
94 this error was fatal, now it produces an error message.
95 kes Ensure correct volume name displayed during restore
96 kes Ensure that Volume is mounted for restore.
98 kes Fix a few more Coverity reported problems.
100 Beta Release Version 2.2.10-b4
102 kes Enhance a couple of SD debug messages.
103 kes Tweak unload flag setting and ensure it is set during swap.
105 ebl Fix #1091 about bad output in estimate command.
107 kes Modify autochanger locking to attempt to avoid race
109 kes Make sure device not busy before doing label command.
110 kes Display open() errors except when polling. Previously too
111 many were suppressed. This should fix bug #1070.
112 kes Fix Win32 reparse points. Bacula will not recurse into any
113 reparse point directory, including mount points, unless the
114 directory is explicitly mentioned at the top level (same as
115 with Unix). A file that is linked to another file will be
116 backed up -- much as Unix does for hardlinked files.
117 This fixes bug #1041.
119 kes Remove double quotes from ChangeLog and ReleaseNotes
120 kes Remove StorageId test when pruning and recycling (Eric's changes).
121 kes Remove old form of locking when getting volumes -- causes deadlock.
123 kes Fix buffer overruns detected by Coverity.
125 Beta Release Version 2.2.10-b3
127 kes Tweak joblog display.
129 kes Implement --without-qwt
130 kes Fix layout of restore tree dialog
131 kes Add configure bat QWT libraries, so that bat can be built
132 with or without the QWT libaries.
134 kes Apply batfix bat cleanup patch from Riccardo.
135 kes Make sure we unload the right slot when swapping.
137 kes Improve SD reserve debug code.
138 kes Testing an improvement to free up volumes no longer in use.
140 Beta Release Version 2.2.10-b2
143 kes Rework SD acquire for read to handle autochanger Volume
145 kes Implement regression that explicitly tests swapping a Volume
146 from one drive to another.
147 kes Enhance disk-changer to detect most error conditions.
148 kes Fix SD code so that it properly swaps a Volume between drives.
149 This fixes bug #1083.
151 kes Prevent a Volume that is being swapped from being freed from
152 the volume list. This will most likely fix, at least partially,
154 kes Fix strippath so that it does not get a buffer overrun and crash FD.
155 This fixes bug #1078.
156 kes Make inability to change owner/group when creating a dir only a
157 warning rather than an error.
159 ebl Fix SQL query in migration code
161 kes Force unload of volume when wrong volume mounted in SD.
163 kes Fix bat seg fault at termination.
164 kes Add Bacula generated version to bat about box.
166 Beta Release Version 2.2.10-b1
168 kes Permit multiple simultaneous restores -- experiment.
170 kes Backport development stream SD reservation system changes.
173 kes Move final volume swapping code to DCR method and
174 call it from acquire_for_read().
175 kes When wrong volume is mounted during read, unload_autochanger.
177 kes Stop searching for Volumes in SD askdir if DIR returns the
178 same volume name twice in a row.
180 kes Tweak the swap Volume from one drive to another code so that
181 it now seems to work.
182 kes Resolve several problems with recycling that broke the new
183 code (these problems are in 2.2.9 as well).
184 kes Remove the volume lock when calling the sysop code.
185 kes Don't mark a reserved volume with no writers as unused otherwise
188 kes Rework class structures for VOLRES, DCR, and DEVICE to make
189 the method names a bit more logical, and for more logically
190 handling the responsibilities.
192 kes Remove redundant code in terminating the scheduler that just
193 causes a seg fault in many cases.
194 kes Cleanup releasing a volume and make it a DCR method.
195 kes Improve algorithm for detecting pre-reserved volume and
198 kes Tweak volume swapping code so it works.
199 kes Correct name overloading in mount.c
200 kes Replace released flag in VOLRES with reserved and add access
201 methods for the VOLRES class.
202 kes Prevent volume from being released while being swapped.
203 kes Refactor parts of stored/mount.c
205 ebl Add sanity checks for VolWriteTime and VolReadTime
206 ebl Take care of bad clock changes while computing VolWriteTime
207 and VolReadTime. This should fix or limit #1066
208 kes Correct error string numbers in dird/catreq.c
209 kes Restructure reserving, acquiring, and mounting volumes. Calls to
210 autochanger are deferred for mount.c -- simplifes the code.
212 kes Do not prune any running job. It just fails the job.
213 kes Lock the volumes when changing dev->reserved_device and marking
214 the volume unused otherwise the device can get reserved by
215 another job before the volume is released, thus blocking it.
218 Beta Release Version 2.2.9-b7
220 kes Close bat console windows first to eliminate error message
222 kes Remove useless code in Scheduler that causes seg fault on
224 kes Correct some SD catalog request error messages.
225 kes Don't allow pruning of any running job.
226 kes Turn off code in read_record that causes a seg fault in the SD
227 when reading past an EOS_LABEL.
228 kes Turn off unloading the autochanger in reserve.c as it just
230 kes Lock volumes when unreserving a device.
231 kes Do not mark volume unused when recycling.
232 kes When acquiring, don't mark volume unused if it is reserved (busy).
234 Beta Release Version 2.2.9-b6
236 kes Eliminate ./configure warning on po directory
237 kes Fix bug #1063, reuse of freed ptr in list nextvol.
238 kes Release regex compile buffer in filed/job.c
239 kes Add proper type of const char in sql_create.c
240 kes Turn off debug in daemon termination routines
241 kes Move free_volume_list() before devices are freed in stored.c
242 kes Fix reference to uninitalized stack variables in bregex.c.
243 This should correct bug #1067.
245 kes Fix possible seg fault in SD when freeing a volume entry.
247 kes Apply patch from bug #1069 that corrects spurious error messages
248 when ACLs enabled on SGI but no ACL exists.
249 ebl Fix a storage deamon segfault at debug level 500.
251 Beta Release Version 2.2.9-b5 -- not released
253 Beta Release Version 2.2.9-b4
255 kes Re-enable code to remember last volume mounted on a non-tape
257 kes Add patch supplied in bug #1068 that fixes a SD crash when using
258 a Virtual autochanger.
259 kes Generate correct JobMedia records during spooling/despooling when
260 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
261 <tih@hamartun.priv.no> for excellent analysis and testing.
263 Beta release Version 2.2.9-b3
265 kes Rework certain SD locking based on gdb tracebacks of deadlocks
266 sent by Eric. This code now uses only the volume_lock() rather
267 than the reservations lock when at EOM and acquiring a new
269 kes Ensure only one exit point in several subroutines.
271 Beta release version 2.2.9-b2
273 kes Fix to initial tape drive open to release the volume name
275 Beta release Version 2.2.9-b1
277 kes Fix to JobMedia fix.
278 kes Fix bug pointed out by Peter Much that causes the StorageId to
279 be updated when reading a tape (during migration, it could have
280 been incorrectly set to the write StorageId).
282 kes Implement autostart scripts for Debian
284 kes Fix mtx-changer.in for broken Debian mt program.
286 kes Massive commit of all fixes and back ports to create 2.2.9
288 kes Apply doc fix from bug #1062.
289 kes Resolve crash and improper restore wx-console Win32 restore
290 GUI. Fixes bug #1065.
291 kes Update Win32 wxWidgets to latest version.
292 kes Attempt to do correct handling of Win32 mount points. Should
294 kes Fix Win32 FD backup/restore memory leak due to improper termination
295 of BackupRead/Write. This fixes bug# 1038.
296 kes Add const to AIX prototype for initgroups()
298 kes Undo bug #1047 heap overrun fix as it is not correct.
300 kes Fix creating first JobMedia record during Migration to include
301 proper index. This caused slow restores of migrated jobs.
303 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
304 and do not strip paths on symbolic links.
305 kes Set catalog backup database and user name from values specified on
306 the ./configure line.
307 ebl Apply patch to correct bug #1031, about wrong pool source information
310 Release Version 2.2.8
312 kes Apply patch from Martin to correct bug #1040, bscan sets existing
314 kes Fixed important spelling error in doc -- bug #1045.
316 kes Move initialization of read/write res lock earlier in the code.
317 This fixes the crash with a null conf file. This fixes bug
319 kes Redefine CURES in lib/parse_conf to be URES and move it all
320 into lib/parse_conf.c -- this responds to bug #1042, but does
321 not fix it. The fix is not to compile with FORTIFY_SOURCE.
322 kes Backport fix de-referencing a NULL pointer in the scanner from
323 the trunk SVN. I don't think this was reported as a bug.
325 Beta release Version 2.2.8
327 kes Re-enable the new job code editing (%f).
329 kes Fix bsnprintf for float point numbers. I broke recently when
330 parameterizing some variables. This fixes bug #1036.
332 kes Move Heartbeat documentation from Job to Director resource.
333 This fixes bug #1033.
335 kes Fix existing switch drive SD code to call autochanger to release
336 any old volume. This must be done to keep the autochanger from
337 releasing subsequently newly reserved volumes in doing a close().
338 This should possibly fix bugs #1032 and #1018.
339 kes Apply big backport of current SVN SD code that corrects a number
340 of race conditions. This is a first step in fixing bug #1018.
342 ebl Fixes bug #1028 where "Selection Type" option was not usable
346 Release Version 2.2.7
348 kes Partial back out (disabled) %f job code editing because it
349 does not build on Win32.
350 kes Fix seg fault Frank Sweetser reports in regression testing
351 on his systems. The problem was that the original author of
352 bsnprintf.c did not take into account the side effects of
353 using ++x in the argument to a #define.
355 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
356 that implements double quoting include names in conf files,
357 and also allows piping input by having the first character
358 be a vertical bar (|).
359 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
360 that implement %f in RunScripts to pass the FileSet name.
361 kes Skip leading | when lex input comes from a pipe as suggested
362 by Michael Stapelberg <michael@stapelberg.de>.
364 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
365 Nerijus Baliunas <nerijus@users.sourceforge.net>
367 kes This patch corrects a problem where the maximum concurrent storage
368 jobs counter gets out of sync during restore jobs causing jobs to
369 'wait on max Storage jobs'. This patch fixes bug #1009.
371 kes Add new include to postgresql.c suggested by Marc Cousins so
372 that it compiles correctly with pgre version 8.3. Also fix
373 misuse of %x with pointer (should be %p).
375 kes This patch fixes bcopy so that it produces correct Volumes.
377 kes This patch eliminates spurious output to the console during a VerifyVolume
378 job that contains encrypted data. It fixes bug #1024.
380 kes This patch prevents the 'status dir' command from trying to use a scratch
381 volume and possibly moving it from one pool to another. This patch fixes
384 kes Fix --archivedir addition to configure. Replace it with
385 --with-archivedir in configure.in This fixes the regression
387 kes This patch fixes bug #1012 where the job is canceled because
388 of Max Run Time exceeded when the job has not yet started.
390 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
391 one 'part' to write. Instead of each part being stored on disk,
392 written to DVD, then deleted from disk, all parts are written to disk,
393 and only the last is written and deleted from disk.
395 kes Correct typos in disk-changer.in
397 kes This patch fixes the status command to include the formating string for
398 JS_AttrInserting. It fixes bug #1021.
399 kes This patch should fix the Mac OS X build problem on the latest
400 Darwin, where sys/types.h was not included correctly (apparently
401 due to a change in the Mac headers). The solution was to explicitly
402 ensure that it is defined for the ./configure.
403 This patch also has a rebuild of configure that includes the Debian
404 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
405 kes This patch should ensure that queued messages to the console are
406 displayed as soon as possible. It should fix bug #1007, but has been
407 reported not to work.
409 kes This patch fixes the infinite loop when trying to increase the
410 maximum number of volumes in a Pool during the add command.
411 This patch fixes bug #1008.
413 Release Version 2.2.6
415 kes Get fix for joblist bug in bat from trunk.
417 kes This patch fixes bug #1003 where putting the message output from
418 a Verify job into the catalog results in a recursive loop. The problem
419 seems to show up only with postgresql (to be verified).
421 kes Fix bug #942 where lots of emails where generated when the heartbeat
422 interval was low and Bacula wanted a different tape from the one in
425 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
426 which was updated during a restore (or a reading migration) bug #982
428 ebl Use qmake-qt4 instead of qmake when available (debian system).
430 kes Add a security warning to src/cats/make_catalog_backup.in indicating
431 that passing the password via the command line (arg 3) is insecure.
432 This responds to bug #990 (it doesn't fix it).
433 kes Apply 2.2.5-postgresql-errors.patch
434 kes Remove unneeded File table index on JobId, which is already
435 present as the first index of another multi-index.
437 kes Set default debug_level to zero. This corrects bugs #991 and #993.
438 kes Fix a crash in bat when it cannot connect to the Director for example
439 if the Director is not running.
441 kes Activate Close button on tray-monitor window. This fixes
444 kes Fix spurious warning message printed when creating a volume with
445 a LabelFormat. This fixes bug #976.
447 Release Version 2.2.5
449 kes Add JobId in place of Job name in all the Jmsg() output.
450 kes Correct the APP_DESC for the Win32 storage service (remove an e).
452 kes Add new SD despooling attributes and Dir inserting attributes
453 job status codes. This fixes bug #961.
454 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
456 kes Fix doc issue. This fixes bug #963.
457 kes Fix listing performance problems in bat. Pointed out by
459 ebl Fix replace on restore. This fixes bug #969
460 kes Fix bat code that tests for Win32. This should fix bug #968
461 kes Query 5 list wrong Vol after migration. This fixes bug #960
463 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
464 in back porting from 2.3.x
466 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
467 The details are included in the notes in this file.
469 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
470 messages; it fixes a problem opening the SQLite3 database when multiple
471 simultaneous jobs were running; it fixes a bug with certain versions of
472 MySQL where batch inserts failed because of table name character case
473 (upper/lower) differences.
474 kes Fix race condition that drops final block written to volume.
475 This happens in rare cases with multiple simultaneous jobs
476 when the Volume fills. This fixes bug #964. May be related
477 to bug #935 and possibly #903.
479 kes Fix FD->SD authorization failure, which was due to spurious
480 wakeups from a pthread_cond_timedwait(). Simply check the
481 predicate before continuing. This fixes bug #953
482 dvl Add new configuration item --archivedir
483 dvl Adjust regression tests to use tmp not /tmp. This will allow
484 multiple concurrent runs of the regression tests.
486 kes Eliminate more strerror() and replace with bstrerror().
487 kes Remove BSD getopt and replace with unrestricted IBM version.
488 kes Fix Win32 build for changed calling sequences.
490 kes Fix FD->SD authorization failure, which was due to spurious
491 wakeups from a pthread_cond_timedwait(). Simply check the
492 predicate before continuing. This fixes bug #953.
493 kes Add const char where needed (more to do).
495 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
496 kes Don't overwrite error message in check_tables_version.
498 kes Unlock batch insert tables with same calls used elsewhere.
499 kes Allow starting 59 jobs a second.
500 kes Make SD session key more random.
501 kes Add retry for SQLite opening db if it fails. Probably helps
503 kes Suppress extra error messages during batch insert failure.
505 kes Put some FD auth code on dbglvl rather than fixed.
506 kes Return insert attributes error message in db msg buffer to avoid
507 false error messages. Helps fix bug #966.
508 kes Separate batch init error messages. Probably helps fix bug #966.
509 kes If Dir gets an error during inserting attributes, cancel SD.
510 This reduces unnecessary error messages.
512 ebl Cleanup batch insert code. Probably fixes bug #965.
514 kes Turn off some code when batch insert not enabled.
515 kes Edit FD name in connect error messages.
517 kes Add code to handle tray monitor separated from Win32 FD.
518 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
520 kes Fix ANSI tape labeling. This fixes bug #954.
521 kes Increase the max block size to 4MB fixes bug #957.
522 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
523 is not properly mounted (recognized) during a poll.
524 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
525 Job that has differences reports Verify OK.
526 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
528 Release Version 2.2.4
530 kes Increase size of name string when FD making connection to SD.
533 kes Add waits to multiple exit detection code to try to force pid
534 file to always be deleted.
535 kes Restore good dev.tar.gz to rescue set appropriate binary property.
537 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
538 trying to switch drives by checking for blocking before unblocking.
540 kes Cancel storage daemon in all cases where FD reports error. This
541 should fix virtually all cases of bug #920.
543 kes Fix error message that was clobbered when Dir tells SD it does not
544 have write permission on Volume. This should fix a minor point
545 in bug #942, but not the main problem.
546 kes Add code to cancel job in SD if FD connection fails. This should
548 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
549 kes Fix migration code to get correct Volume name with multiple volumes
550 by skipping |. Fixes bug #936.
551 kes Implement patch supplied by Landon to fix bug #944 where using
552 TLS with bconsole uses 99+% of the CPU.
553 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
555 kes Move patches into patches directory.
557 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
560 ebl Using 'm' in bconsole will show messages like before,
561 and not memory usage.
563 Release Version 2.2.3
564 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
567 kes Fix bug #935, and probably also bug #903 where files were not
568 restored. MediaId was not properly set in JobMedia record after
571 kes Add ./configure search in qwt-qt4 for qwt package
572 kes Apply Martin Simmons patch that should turn off the new API usage
573 when batch insert is turned off allowing building on older
576 Release Version 2.2.2
578 ebl Detect if new PosgreSQL batch insert API is present.
579 kes Correct incorrect mempool call causing Director crash.
580 sb Update spec files for 2.2.1 release
582 Release Version 2.2.1
584 kes Update POTFILES.in
585 kes Cleanup a few underquoted AC_DEFUNs in configure
586 kes Apply patch from Martin Simmons that adds a test for va_copy to
589 kes Fix bug #921 by increasing the number of tries to create a new volume
591 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
592 can be called multiple times. Implement a version for machines
593 without va_copy() that gets a big buffer.
595 kes Integrate more portable zone offset code into bsmtp.c
596 Submitted by Attila Fülöp.
598 kes Fix bad SD->FD return status reported by
599 (James Harper) <james.harper@bendigoit.com.au>
600 ebl Fix a bug in read_close_session which return random status
601 thanks to James Harper
603 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
604 and directory names during restore of single file/directories.
605 kes Add sanity checks to .sql command when string is empty. Hopefully
606 that will resolve Dirks Director crash.
608 kes Apply patch submitted by Martin Simmons that corrects a seg fault
609 in the bsmtp chat subroutine when debug is >= 10.
611 kes Fix Director crash when running bat SQL queries.
612 kes Add David's notes on Item 8: Copy pools.
614 kes Rework projects file to be current and ready for a vote.
615 kes Enhance lex scanner error message.
617 kes Tweak LICENSE file to mention BSD code.
618 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
619 if specified on the ./configure.
620 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
621 This class is intended to allow us to open a second bsock to the
622 Director while in the restore subdialog.
624 kes Fix configure to create bat Makefile before creating dependencies.
625 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
626 kes Add a tooltip to the tray monitor.
627 dvl Set the Director's PID file before dropping privs. This fixes
630 kes Update AUTHORs file
631 kes Increase the default max concurrent jobs to 20 in FD and SD to
632 correspond with the default .conf files.
633 kes Rewrite the Win32 service routines. This eliminates the 3 copies
634 some different, of the same file created by RN when porting the
636 kes Rearrange some of the Win32 directories and the placement of the files
638 kes Set DEVELOPER flag in version.h
640 ========================================================================
641 Release Version 2.2.0
643 kes Apply a second doc patch from Marc.
644 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
645 improves the tips section that discusses how to setup multiple
648 kes Update bat README file.
649 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
650 corrects a typo in the Recycle status check in db_find_next_volume().
651 This will probably fix a number of annoying problems with multiple
653 kes Modify most of dird/msgchan.c to use bsock class calls rather than
654 bnet calls -- no functionality change.
656 kes Modify the Verify output to specify if files are missing on
657 the Volume(s) or disk. Fixes confusion in bug #916.
658 kes When more than one Volume is read in a migration job, the last
659 Volume bytes reported are from the last read volume rather than
660 the last written volume. Fixed. This fixes bug #910.
661 kes Fix display of Recycle flag after update volume=foo recycle=yes.
662 It previously printed New Recyle flag is: no. This fixes bug
665 kes Correct seg fault when switching tape drives during restore.
666 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
667 be used until after 2.2.0 release.
669 kes Remove fnmatch() in SD that permitted wild card specifications.
672 kes Fix %g in filename returned by SQL for browse tree reported by
674 kes Fix configure so that it puts config.out in the cwd rather than
676 kes Attempt to fix the locking problem reported by Eric in bug #906.
677 kes Make berrno class to leave errno unchanged after constructor call.
678 kes Make bnet_server use the heap rather than the stack to allocate
679 its socket fd pointers to avoid a crash at termination. Problem
680 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
682 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
683 and putting it in depkgs-qt along with Qt4.3.
685 kes Rework code in acquire.c that switches drives for reading when
686 the Media Type does not match. This should fix bug #906
688 ebl Fix a director segfault during job setup #907
689 kes Correct seg fault in postgresql when first operation returns no
690 rows. Fixes Dirks File browser problem seg fault with bat.
692 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
693 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
696 kes Implement PopUp YES/NO dialog for bat.
698 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
700 kes Correct RunScript to terminate job in FD on failure.
701 kes Change abort_on_error and AbortJobOnError to fail_on_error
702 and FailJobOnError in RunScripts.
703 kes Minor tweaks of code formating in RunScripts, principally to
704 avoid depassing 80 columns.
706 kes Eliminate one #ifdef Win32 in bsmtp
707 kes Implement grow tool to grow a file for testing very large databases.
708 kes Add big-vol-test to test Bacula seeking with > 5GB.
711 kes Modify find_next_volume() to return all values in Media record.
712 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
716 kes Update Release notes
718 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
719 Warning, in previous beta version, all media get from scratch keep their
722 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
723 This should fix bug #842. Made a note to look at removing the temp
724 files at the end of the install.
725 kes Add ability to mount and unmount a file device providing it is
726 marked as being removable and has the appropriate mount and unmount
727 commands defined in the Device resource. This fixes bug #830.
728 kes When applying a storage override, release all previous storage
729 definitions rather than just prepending the new storage.
730 This should prevent a good deal of confusion.
732 kes Implement ./configure search for qwt libraries.
734 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
735 Win32 FD. This should fix bug #893.
736 kes Remove an unnecessary beep in Win32 init code.
737 kes Update copyright dates in Win32 executable about boxes.
738 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
739 code with a BSD getopt.c and getopt.h.
740 kes Remove sched.h from the Win32 compat directory -- not used.
741 kes Remove the Exit menu item from the Win32 tray monitor. If you really
742 need to shut it down, do it through the services panel or the command
744 kes Remove some inappropriate Bacula FSFE copyrights.
745 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
746 kes Fix regress config non-portable test as pointed out by
747 Florian Heigl <florian.heigl@gmail.com>
748 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
749 as pointed out by Florian Heigl <florian.heigl@gmail.com>
751 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
752 Reported by Frank Sweetser.
756 kes Fix client-only build.
757 kes Integrate client-only fixes for bsys (initgroups) and conio from
758 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
759 kes Make arguments to get_scratch_volume() in same order as other
761 kes Rework the prune_volumes() subroutine so that after purging and
762 no volume found in desired pool, it will check for a scratch
763 volume. This prevents recycling the whole scratch pool.
764 kes Add code to status storage to print boffset_t (largefile support).
766 kes Move qwt (Graphics libarary for Qt4) to depkgs.
767 kes You now need a --with-qwt=<dir> to be able to build bat.
768 kes Update src/win32/cats/bacula_cats.def to include the new
769 db_get_query_dbids() call on Win32.
771 kes Correct a problem when selecting a scratch volume and moving
772 it to another pool that lost some columns.
773 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
774 kes Enhance Autochanger error messages to include Volume and device name.
775 kes Rework prune_volumes() code to take account of InChanger flag,
776 and to handle recycling volumes going to the Scratch pool and
777 current pool because the RecyclePool directive.
778 kes Implement a better and more efficient db_get_query_dbids() to
779 handle creating and passing back a list of DBIds.
783 kes Start work on new more efficient DBId subroutine. First use
784 will be for recycling volume to Scratch inchanger.
785 kes Increase number of JobIds in pruning from 1000 to 10000.
786 This to be replaced by above routine.
787 kes Begin implementation of building Qt4 on Win32.
788 kes Correct typo in fix I added for bad TLS shutdown.
789 kes Pull 2.0.3 patches into patches directory.
790 kes Update Release notes. Include qt-console in line count.
791 kes Update Projects file.
793 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
794 bug in migration code where a job that spanned two volumes
797 kes Implement new BST_DESPOOLING blocked state. Change from locking
798 during despooling in SD to blocking. This means that other threads
799 can work with the device structure, in particular the reservations
800 system while despooling.
802 kes Fix return in reservation message queue that missed clearing
803 the jcr lock (implemented 26Jun07 below).
804 kes Rename a number of dev methods to make locking function names
806 kes Document locking in lock.c. Move lock structures to new file
809 kes Move reservations message lock to lock jcr only this
811 kes Move main SD locking code into lock.c (new file).
812 kes Update Win32 build to include lock.c
816 kes Dirk committed the qwt library code for drawing graphs in bat.
817 kes Tweak install of qwt so that it is integrated with ./configure.
819 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
820 out by Eric (my typo).
821 ebl Fix configure.in to get batch mode enable
822 kes Return correct string from authenticate.cpp in bat when connecting
824 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
825 spurious line drops when using TLS.
826 kes Do not file reparse points when restoring a file that already
829 kes Implement Windows reparse points -- similar to directories, but
830 we do not descend into it. This is a first cut. They seem to
831 be backed up, but restore is not yet tested.
832 kes Remove restore_blocking in tls code when shutting a socket to leave
833 it in blocking mode. Hopefully this will fix the encryption bug
834 reported by Frank Sweetser.
835 kes When opening a file for backup, tell the OS that we are going to
836 read it sequentially -- optimization.
837 kes Change variable names in authenticate_director() to not conflict
838 with member names in bat. Caused great confusion with compiler,
841 kes Queue openssl error messages in case of comm problem.
842 kes Do shutdown() call if socket terminated.
843 kes Remove some duplicated code in tls.c
844 kes Move more of the bsock member variables into private and access
846 kes Add Frank Sweetser's tls-test to the regression suite.
848 kes Add Swedish sv.po file
850 kes Don't print clock skew message in FD if less than 3 seconds diff.
851 kes Add a bit of VSS info to status client.
852 kes Implement a first cut of Vista VSS, using Win2003 code.
856 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
857 loaded tape but uses first drive).
858 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
859 This was indeed a Win32 issue.
861 kes Simplify search of autochanger for in-use Volume.
862 kes Fix exit condition of check for in-use volume. kes Remove
863 inappropriate my_postgresql_free_result() in db_close()
865 kes Fix bad return in FD when encryption signature not found.
866 Probably caused a crash.
867 kes Inhibit missing encryption signature error messages for
868 file types where no signature computed.
869 kes Correct inverted check on autochanger in reservation system.
870 kes Tweak debug code in autochanger reservation.
872 kes Add some additional locking in the cats directory in subroutines
873 that modify packet variables called from batch insert.
874 kes Rework how dcrs are allocated. new_dcr() can now be called
875 with an existing pointer, and it will simply clean it up.
876 This allows the reservation system to test various different
877 devices, and will permit easy device changes.
878 kes A bunch of changes all over to handle new new_dcr() calling
880 kes Work more on the Volume management in the SD. Remember Volumes
881 for tape drives and for autochangers (even virtual disk changers).
882 kes When looking at the Volume list to reserve a drive, handle
883 autochanger names correctly by interating through the changer
884 devices. Also call the Director to see if a Volume is suitable
886 kes Fix some bugs in bscan. Make sure all media records are written.
887 Make sure that valid JobMedia records are written for disk files.
888 Previously they were completely wrong.
889 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
890 that the URLs don't change and so that the developers will all
891 work off the same copy. Rebuild from scrach.
892 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
896 kes Fix seg fault in FD from incorrect digest size.
897 kes Fix argument to non-OpenSSL crypto.c subroutine.
901 kes Remove a few malloc()s from the encryption code.
902 kes Use the class calls to bsock in filed/backup.c and restore.c in
903 place of the old bnet_xxx code.
904 kes Implement code that does an on the fly calculation of the
905 signing digest during restore of encrypted files. It makes
906 a best guess at the algorithm, and if it is not correct, will
907 then revert to the old code which reads the file after it is
909 kes Implement at least one missing crypto stream in stream_to_ascii()
910 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
911 #877 where a reload with bad syntax causes Dir to exit.
913 Cut: 2.1.14 beta (not released)
915 kes Do not free a volume on a tape drive until another volume is
916 mounted and read, or the autochanger unloads the volume.
917 This should help the SD re-use volumes that are already mounted,
918 and should fix bug #886.
919 kes Apply patch from user brettedgar that allows gnome2-console include
920 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
921 kes Apply patch from Lucien Weller that fixes day of week calculation
922 because of DST flag problem. Fixes bug #887.
924 kes Move find_next_appendable_volume() to after acquiring a valid device
925 in reserve.c. This fixes bug #864 -- confirmed by reporter.
927 kes Unable to reproduce bug 872. However added additional testing for
929 kes Bug #874 resolved by documenting SQLite limitations.
930 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
931 kes Bug #881 resolved by removing typo in mtx-changer script.
932 kes Made Frank Sweetser's wiki the official Bacula wiki with his
933 approval. Added a link to the wiki on the web page, and implemented
934 a backup from http://paramount.ind.wpi.edu
936 kes Fix update allfrompool to pass pool name.
938 kes Convert to pure GPL v2 license.
939 kes Fix sscanf problems reported by Peter Buschman that caused
940 a bus error on Solaris.
941 kes Rework (simplify) the select prompt in bat.
942 kes Move get_jobid_from_tid() into lib and create a
944 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
945 should definitely fix the problem of lost error messages in the
947 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
948 kes Eliminate tcpd.h from the project. Enclose the #include from the
949 library with extern C ...
950 kes Add print of signal name when a signal is trapped.
954 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
956 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
957 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
958 makes SQLit3 run 30 times faster, though a bit less safe.
959 kes Implement --with-batch-insert in configure and detection of thread
960 safe libraries. It is on by default, but turned off if no thread
961 safe library (e.g. SQLite 2) is available.
963 kes Fix Bacula PostgreSQL buffer overruns.
964 kes Do better checking for NULL results returned from PostgreSQL;
965 implement retry for failed queries; clear results buffer after
966 failed query. Hopefully this will correct the PostgreSQL failures.
968 kes Implement algorithm to handle only one appendable volume with
969 Prefer Mounted Volumes = no.
970 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
971 returned from a query.
972 kes Make volume lock recursive.
973 kes Implement an additional volume reservation algorithm that
974 starts by considering all reserved volumes then uses the
975 old brute force algorithm of searching the resources to
976 find a suitable device.
977 kes Add new reservations debug code and refine the old code.
978 kes Update the win32/dll/bacula.defs file.
980 kes Tweak reservations algorithm to permit a few more cases, i.e.
981 volume reserved, but on different drive, ...
982 kes Enhance SD status to include Pool and Media Type for drive in a
983 more readable format (a bit longer).
984 kes Fix PostgreSQL double free.
986 kes Minor refactoring of restore decryption code.
987 kes Add code to smartall.c to detect double free of a buffer.
989 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
990 so that bsmtp will create a correct email address (mailbox only).
991 kes Modify 'memory' command so that the buffers are listed as 'In use'
992 to avoid confusion with Orphaned buffers.
993 kes I reworked the OpenSSL include/lib flags to be handled in
994 the standard Bacula way, which should fix bug #863 concerning
995 non-standard OpenSSL libraries.
997 kes Implement Help Browser window for bat.
998 kes Fix reload bug that reset StorageId to zero.
1000 kes Fix TLS #ifdefing when TLS turned off.
1001 kes Ensure that when labelling a tape with Slot=0 that InChanger
1003 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1005 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1006 add DISTINCT (required by PostgreSQL).
1007 kes Implement BSOCK authenticate_director() method. Eventually will
1008 authenicate all daemons.
1009 kes Move several more functions into the BSOCK class.
1011 kes Add code to tell the OS that we no longer need a cached
1012 file that we were reading. In findlib/bfile.c. Also,
1013 only cache files that we are reading. Thanks to
1014 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1015 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1016 kes Implement script to automatically generate cats and dll .def
1017 files for Win32 dll.
1018 kes Update README.mingw32 to include new .def file generation.
1019 kes Correct typo in UTF-8 error message as reported by:
1020 jhernandez <julianhernandez@gmail.com>
1021 kes Add additional sm_check() code on debug level 1.
1022 kes Set default debug level to 1.
1023 kes Trap SIGABRT in attempt to get traceback.
1025 kes Reduce bat connect timeout from 30 to 15 seconds.
1026 kes More restructuring and implementing BSOCK class in place of
1028 kes Remove a few unnecessary malloc() tests in crypto code.
1029 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1030 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1031 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1033 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1035 kes Fix Verify InitCatalog. The attributes were not pointing to the
1036 correct saved location.
1037 kes Implement message callback so that GUI is sure to get all
1038 daemon messages. Currently displayed in a dialog in bat.
1039 kes Ignore SIGUSR2 (Bacula timer) in bat.
1040 kes Apply regress patch from bug #859 to allow regress to work
1041 with Solaris compiler.
1043 kes Begin adding TLS support to bat.
1044 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1045 clean up lex.c and make it more readable.
1047 kes Move more bnet functions into the BSOCK class.
1048 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1049 kes Complete change of berrno strerror() method to bstrerror()
1051 Release: 2.1.10 beta
1053 kes Cleanup incorrect email addresses in bsmtp.
1054 kes Make bat display initial messages rather than discard them.
1056 kes First cut of adding .mod to the run command.
1057 kes Implement auto display of messages in bat.
1058 kes Enhanced preferences to allow all Bacula output to be
1061 kes Try to make bsmtp date routines more generic.
1062 kes Fixed bug #856 autochanger documentation.
1063 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1064 kes Add new cats entry point so Win32 builds.
1066 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1068 kes Do better checking for the MySQL 64 bit libraries looking for both
1069 .a and .so libraries.
1070 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1071 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1072 kes Require the thread safe version of MySQL during configure. Thanks
1073 to Andre Noll for pointing this out.
1074 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1075 continuing in migration code.
1076 kes Apply implementation of tray-monitor font derived from gnome-console
1077 submitted by Andreas Piesk <a.piesk@gmx.net>
1079 kes Eliminate important memory loss in SQLite
1080 kes Fixed the batch insert MySQL thread specific data that was not
1081 being freed. See cats/mysql.c:db_thread_cleanup().
1082 kes Fix restore before command.
1083 kes Convert old hdr.name to name() in a few places.
1084 kes Implement update jobid command.
1085 kes Return all time_t dates in db_get_job_record()
1086 kes Stop watchdog in SD earlier.
1087 kes Put Pool just after Storage in please mount message.
1088 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1091 kes Update the po files.
1092 kes Fix Verify InitCatalog by making it cache attributes.
1094 kes Change name bacula-bat to bat for man 1 page to correspond to
1096 kes Check for client and store NULL pointers in status command. This
1098 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1099 kes Fix sign extended editing of %p.
1100 kes Clean out a little old #ifdefing in cats/mysql.c
1102 kes If time diff between DIR and FD is more than 600 seconds convert
1103 INFO message to WARNING.
1104 kes Implement heap size display in status for all daemons.
1105 kes Attempt to fix MySQL db open memory loss (not successfull).
1106 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1107 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1108 Query. This looks like a MySQL but but by doing extra releases,
1109 the memory goes away. This should fix bug #847.
1111 kes When backup fails, cancel SD before waiting for sd termination.
1112 kes If SD is waiting for FD to connect during cancel, wake up the
1114 kes Fix fsf code so that errno is correctly reported.
1115 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1117 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1118 so that Bacula doesn't later stumble into a seg fault.
1119 kes Use the term Restore Client in the restore Job report.
1120 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1121 the original job's FileSetId.
1122 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1123 spooling in migration jobs. Not yet tested.
1124 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1125 reading conf file from a pipe. However, do it with open_bpipe()
1126 rather than popen. Not yet tested.
1128 kes Fix an ugly bug where the VolCatBytes were getting updated
1130 kes Implement bconsole memory command that prints current memory
1131 usage, plus smartalloc dump.
1132 kes Clarify some error messages in backup, admin, and migrate.
1133 kes Shrink label dialog to smaller size.
1134 kes Invert Cancel OK buttons on restore to be OK Cancel.
1135 kes More strerror() to bstrerror() conversions.
1137 kes Start implementing bstrerror() in place of strerror().
1138 kes Stripping path -- seems to work.
1140 kes Prevent door and port files from being restored (mostly
1142 kes Free an unreleased buffer in compat code.
1143 kes Change console Job name from *Console* to -Console- to eliminate
1144 Win32 filename problems. Put Win32 path separator when creating
1145 Console file. This fixes bug #846.
1146 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1148 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1150 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1151 to force Win32 error message.
1153 kes First cut strip path. The data should be passed to the FD,
1154 but nothing is done with it yet.
1155 kes Enhance the digest and signature routines in the crypto
1156 library to accept a JCR and to use it to print error messages
1157 so that they will go in the Job report rather than the daemon's
1159 kes Simplify some of the verify signature code.
1160 kes Simplify a few of the alternative returns in the signature
1163 ebl Use only POSIX regex instead of GNU regex in breg.c for
1164 File relocation. It fix broken freebsd compilation.
1165 kes Convert all other Dir files to use new ua class message
1167 kes Tentative fix for missing digest signature in bug 807.
1168 kes Correct handle problem in new win32_ftruncate routine.
1169 kes Convert ua_purge.c and ua_update.c to use new ua class
1170 message routines for bat.
1172 kes Correct incorrect installation of LICENSE in Win32 installer.
1173 kes Display LICENSE at the beginning of the Win32 install.
1174 kes Attempt to correct the need for the png files to be installed
1176 kes Reapply my bat.conf install script in qt-console. I think I
1177 editted bat.pro instead of bat.pro.in and it was lost.
1178 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1179 the /var/lock/subsys for subsysdir. Also corrects typos in the
1182 kes First cut update job.
1183 kes Correct configure to include qmake of src/qt-console directory.
1185 kes Make restore job yes/mod/no print in one command so GUI works.
1186 kes First cut implementing backup and restore client.
1187 kes Correct editing in Verify output that caused a seg fault.
1189 kes Insure that bat.conf is not overwritten during installation.
1190 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1191 while I was implementing migration in March 2006 !
1193 ebl Cleanup file relocation, using char *RegexWhere instead of
1194 char *where + bool where_use_regexp
1195 kes Update some manpages and add bat manpage.
1196 kes Make a first cut at converting bacula.spec.in for bwx-console
1198 kes Apply patch from John Goerzen to add hostname as fourth argument
1199 to make_catalog_backup script.
1200 kes Fix typos I introduced into bsmtp.c
1201 kes Make pm_strxxx() routines handle input of NULL pointer. This
1202 is to protect from NULL pointers returned from SQL databases.
1203 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1204 kes Add more debug to FIFO code -- fix fifo regression test.
1206 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1207 kes Add thread timer to bnet_connect() to break from OS if wait time
1210 kes Update Win32 build to include new files, new symbols, and
1212 kes Implement socket level heartbeat (tcp_keepidle)
1213 ebl Commit File relocation patch
1214 kes Make bat have 'make install' target.
1215 kes Warn during install if old gnome-console binary found.
1216 kes Warn during install if old wx-console binary found.
1217 kes Add -8 option to bsmtp command line to add content type utf-8.
1218 Fixes bug #809. (Character coding problem in bsmtp).
1219 kes If < is found in target (from, to, cc) then do not enclose the
1220 target in < > in bsmtp. Fixes bug #772 (malformed address).
1221 kes When printing certain items in dbcheck, stop after 300000.
1222 Fixes bug #822. (dbcheck loops).
1223 kes Incorrect status in Dir after waiting for mount with poll set.
1226 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1228 kes Print waiting to reserve a device every 5 mins.
1230 kes Don't call close_part in label.c if tape and relabel.
1231 kes Don't free volume if busy in close() -- should help with
1233 ebl Fix #824 RunScript bug (After script could be execute twice)
1234 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1235 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1236 Add a regression script to test RunScript
1238 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1241 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1242 deprecated. No additional bugs will be fixed, and they will be dropped
1243 in a future release (probably 2.4.0).
1244 kes Change name of wx-console to bwx-console to make it more Bacula
1246 kes Change the name of gnome-console to bgnome-console to make it
1249 kes Some time in March, a Feature Request with patch from Jorj Bauer
1250 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1252 The ability for the director to validate a Client (FD) CN against
1253 an arbitrary set of patterns rather than the hostname, with
1254 A new 'TLS Allowed CN' set of directives which are implemented
1255 in the Client resource. Then pattern matching is used in place
1256 of hostname matching against the Certificate's CN. As an example, we
1257 have certificates which (a) use a local CA, and (b) have a CN of the
1259 kes Add new/changed entry points to Win32 build
1260 kes Create unaccepted-projects for projects that are not accepted.
1261 kes Simplify locking in the reservations system.
1262 kes Add more debug code in reservations.
1263 kes Make sure error condition on reserving a volume is handled correctly.
1264 kes Correct handling of volume_in_use.
1265 kes Correct handling of initializing a device.
1266 kes Move handling of broadcasting releasing a device into release_device().
1267 kes Correct attaching dcr to dev so that it is only done if device
1268 is properly initiated.
1270 kes Locking debug level tweaks in SD.
1271 kes Tweak new Volume code.
1273 kes Add exec external-command [wait-seconds] to bconsole. This
1274 executes the external-command. Note! normally external-command
1275 should be enclosed in double quotes.
1276 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1277 it should normally be off in a production system.
1279 kes Implement die command for SD so that we can force it to dump.
1280 kes Implement SD lock debug code.
1281 kes Implement new algorithm for keeping Volume list in SD. It
1282 is now owned by the device.
1284 kes Implement new code for freeing in use volumes that should
1285 resolve if not all, some of the problems of multiple drive
1286 tape conflicts described in bug 801.
1288 kes Fix gui/bacula-web/images files in svn.
1289 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1291 ebl Fix a bug in batch mode (in string escape)
1292 kes Correct migration prune SQL typo that crept in in a
1293 recent 2.1.x change.
1295 kes Move bnet_despool() into class in bsock.c
1296 kes Modify job report to include director name and Build OS.
1297 kes Move drop root privilege and check_catalog() before fork.
1298 kes Add update database scripts (version 9 to 10) to updatedb directory.
1300 ebl Check size and age of each file after its backup to see if
1301 it has changed during backup, if 'checkfilechanges' is set.
1302 The FD will do an extra check (stat(2)) after
1303 each file backup. mtime, ctime and size are compared with
1304 'before backup' information. If time or size mismatch, an
1305 error message will be generated. You must upgrade FD to use it.
1307 kes Make database name and user configurable
1308 --with-db-name=xxx --with-db-user=xxx
1309 kes Add back database type to message.c for debugging.
1311 kes Implement dir_sql() which issues an SQL query.
1312 kes Modify bat medialist to use dir_sql() and do some minor C++
1313 formatting as well as eliminating a number of pointers, simplifing
1316 kes Fix some of the mtx-changer grep commands for tape label readers.
1317 kes Convert a number of bsendmsg into the appropriate send/warning/error
1318 message class calls.
1319 kes Suppress the using database message in the .sql command.
1320 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1322 kes Add context menu for floating a window.
1323 kes Some minor cleanup and name changes in qt-console
1324 kes Add doing mt setblk 0 in Win32 mtx-changer.
1325 kes Apply Martin's bug fix to move definition of ENODATA for
1327 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1328 sqlite2 and sqlite3.
1330 kes More pruning cleanup.
1331 kes Turn on wait_for_drive by default in mtx-changer.
1332 kes Turn on Batch insert code by default as it now passes regression.
1333 kes Add ./configure --enable-bat to enable building of Bat.
1334 No install yet though.
1336 kes Implement a new .sql command for bat.
1337 kes Implement code to turn off pruning in obtaining the next volume.
1338 Pruning is turned off for the status dir command, but turned on
1339 for SD requests and for the list nextvolume command.
1341 kes Correct Qmsg() that was not updated correctly when committing a
1342 previous change (probably the recent TLS patch).
1344 kes Write new subroutine is_volume_purged() that explicitly checks
1345 if the Volume is purged, and if so marks it as such. This should
1346 resolve problems reported about needing to mount twice to recycle
1348 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1349 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1350 amount of duplicated code.
1351 kes Do volume pruning only for the Media Type desired (reduces pruning time
1352 if multiple Media Types are in the same pool).
1353 kes Implement more detailed info in the Job report for the Bacula version
1355 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1357 ebl Add bbatch tool to bench database and insert mode.
1358 Fix sql quote stuff in batch mode
1359 Fix sql stuff for mysql
1361 kes Correct problems with am/pm scheduling. Fixes bug #808.
1362 kes Implement new prunning code that prunes up to 1000 jobs at
1363 the same time. The same technique can be applied to a number
1364 of other prune/purge subroutines.
1365 kes Add an insanity check when starting a new tape job to ensure
1366 that the tape position has not been changed. If so fail the
1368 kes Fix Win32 build for dlls to add the folllowing:
1369 src/lib/bsock.c -- new file with new entry points
1370 src/lib/dlist.c -- new entry points
1371 src/cats/sql_create.c -- new entry point
1372 src/cats/sql_cmds.c -- new DATA item exported
1374 ebl batch mode cleanup bscan-test is ok now.
1375 kes Implement SD code to check length of disk volume before appending.
1377 kes Correct return status on db_batch... routines.
1378 kes Add call to db_write_batch_file_records() to migration code.
1379 ebl Fix AfterJob timing
1380 kes Move the checking of the database in initializion of the Director
1381 to after we drop privileges. This avoids the need for both root
1382 and bacula access to the DB.
1383 kes Correct a misplaced variable definition in src/filed/backup.c
1384 kes Correct how the new batch insert db_create_attributes_record()
1385 uses the arguments. Caused a seg fault in bscan.
1386 kes Implement lock() and unlock() methods in DEVICE class.
1387 Implement block() and set_block(xx) methods in DEVICE class.
1388 kes Modify bnet_connect() so that it uses time() to check for the
1389 wait time expiring (on some OSes, some system calls may not
1390 return immediately).
1391 kes Modify Verify to obtain the previous JobId when it is actually
1392 running rather than at schedule time (as it was in 1.38.x).
1393 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1395 kes When checking pid in pid file, continue running if the pid is
1396 the same as ours. This occurs on IRIX after a system crash.
1399 kes Extend new GUI API.
1400 kes Make the ua structure a class, and implement send_msg(),
1401 error_msg(), warning_msg(), and info_msg().
1403 kes Apply fix from for building wx-console on the Mac from
1405 kes Implement new select mechanism for GUI programs.
1406 kes Reorganize initialization of stackedWidgets in bat.
1408 kes Add updated nagios plugin supplied by Christian Masopust.
1410 kes More bat implementation.
1411 kes File migrate bug with Pool Occupancy using mediaid instead
1412 of jobids. Fixes bug #795.
1413 kes Fix orphaned buffers in filed backup and verify due to
1414 crypto buffers not freed during errors. Fixes bug #789.
1415 kes Extend new GUI api code to tree commands.
1416 kes Ensure that tree and dot commands check console ACLs.
1417 kes Permit marking directory with trailing slash.
1418 kes Allow 20 console connections (instead of only 10).
1420 kes Add smartctl call to bacula-sd.conf as an example of getting
1423 kes Modify jobq.c to let simultaneous restore jobs run. This may
1424 cause them to fail if they cannot get a drive.
1425 kes Add Client Connect Wait to Storage daemon to permit users to
1426 modify the time the SD waits for a FD connection.
1428 kes Correct virtual changer check which was backwards. This caused
1429 volumes to be unloaded into slots already occupied.
1431 kes Apply Command ACL filter to JobId list in restore command.
1432 kes Correct typeo in var.c patch.
1434 kes Don't let Bacula prune File or Job records for the current Job.
1435 kes Fix variable substitution pad + inc bug reported (with patch)
1438 kes Correct SQLite log table index as reported by Luca Berra.
1440 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1442 kes Begin implementing new comm signals for API.
1443 kes Fix a few places in lib/message.c where the open fd may
1445 kes Continue implementing lib/bsock.c (real class). Make jcr,
1446 who, host, and port private. There are new methods to access
1447 them for non-class use. This required touching a number of files.
1449 kes Add LANG=C to autoconf/randpass so it works with languages other
1450 than English. Fixes bug #788.
1452 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1454 You will not be able to generate Include/Exclude list any more.
1455 It will be fixed soon.
1456 If you want to use this, you can apply
1457 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1459 kes Restore of sockets created false error messages because Bacula
1460 no longer restores sockets, but the code was still trying to
1461 set the attributes on a non-existent file. Reported by a user.
1462 ebl finish RecyclePool feature
1463 Media will takes Pool.RecyclePool
1464 when moving from Scratch to a Pool or when user will do
1465 update volume=xxx frompool
1466 To use it, add RecyclePool = aPool to your Pool resource
1469 RecyclePool = Scratch
1473 kes Expand new BSOCK class adding signal() and new BNET signals.
1474 kes Begin enhancing the dot commands adding a new API function
1475 that returns more information and will make it easier
1476 to interface to the Director from a program.
1478 kes Make DEVICE fd private. Its new name is m_fd, and can be
1479 obtained with dev->fd() outside the class. This is the
1480 first of many DEVICE members to be made private.
1481 kes Implement Michael Renner's idea on having a virtual disk
1482 changer. I made some minor modifications (e.g. I did not
1483 implement the Virtual Changer directive, but simply set
1484 the Changer Command to an empty string.
1486 kes Implement a BSOCK send() method that writes the whole record
1487 in a single write() request rather than in two.
1488 ebl add update volume=xxx recyclepool=yyyy
1489 volume takes recyclepool from pool when using update volume=xxx from pool
1491 kes Fix encryption deblocking bug, which caused some restored files
1492 to be truncated. This fixes bug #763.
1493 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1494 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1496 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1497 ebl Use btime_t instead of uint64_t in media patch.
1499 kes Optimize the use of the database a bit in the Status dir command.
1500 Only open it when needed, ensure that if any previous database
1501 was opened, it is closed.
1503 kes Correct VolCatBytes bug from media patch.
1504 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1505 in the case of orphaned records.
1506 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1507 and File records in 300K chunks to be more efficient. This
1508 idea came from Juan Luis Frances (if I remember right).
1509 kes Apply Eric's scratch patch that moves a purged Volume to
1510 the RecyclePool. Question: how is RecyclePool set? what
1511 happens to the ScratchPool?
1512 kes Apply Eric's media patch that collects read/write media
1513 times as well as byte counts. This patch requires a
1514 simultaneous upgrade of the DIR and SD. Note, there
1515 should be some way to turn off timing. I'm not sure
1516 times are in Bacula units.
1517 kes Apply Eric's batch-insert patch.
1519 kes Update projects list.
1521 kes Implement Include/Exclude file lists in FD as dlists using
1522 the new dlistString class. This permits efficiently having
1523 large include/exclude lists and completes project Item 25.
1524 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1525 console is authorized to cancel the job. This fixes bug
1527 kes Modify SD so that the VolCatJobs medium record is updated
1528 at the beginning of a Job rather than the end. This
1529 fixes bug #775 where exceeding MaxVolJobs caused jobs
1531 kes Added a mutex around getting and setting Volume information
1532 so that multiple simultaneous jobs will single thread.
1534 Switch to using Subversion
1535 kes Remove src/pygtk-console/ from configure
1537 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1538 plus the entrypoints.
1539 kes Apply patch supplied that corrects debug print
1540 in canceling jobs for max run time. Supplied as
1541 part of bug #621, which was previously fixed.
1543 kes Test on job_canceled() and sd_msg_thread_done inside
1544 loop starting the message thread to avoid a race condition.
1546 kes Remove rl_catch_signal from console.c as it conflicted
1547 with the header definition. Fixes bug #765.
1548 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1550 kes Clarify some stored/acquire messages to indicate if the
1551 problem is with read or append.
1553 kes Fix memory leak with storage ids in cats/sql_get.c
1554 kes Terminate watchdog earlier to avoid reference to released
1555 memory -- reported by Jason Austin.
1556 kes Move closing the database from jobq.c to the director daemon
1557 termination routine. This fixes memory leaks for shadow jobs
1558 (i.e. migration jobs).
1559 kes Free up the unique jobid chain items in migrate.c. This fixes
1560 a memory leak problem.
1561 kes Convert some ugly looking for statements to use foreach_alist
1562 in findlib/find.c. This will facilitate converting the structures
1563 to use dlist (for large include/exclude lists).
1564 kes Fix a bug in the btree.c and btree.h routines, then rename them
1565 rblist and add them to be built in src/lib. Include some new
1566 methods written by Rudolf Cejka that make the code more readable
1567 (hides some of the ugly casting).
1568 kes Add set_next() and set_prev() methods which make the code much more
1569 readable. Also add a new dlistString class that facilitates storing
1570 strings in dlists. To be used in the large include/exclude lists.
1571 kes Make some trivial modifications to lib/tree.h that use rblist
1572 rather than dlist for storing the tree links. This was suggested
1573 by Rudolf Cejka. The result of this is that the restore tree now
1574 uses red-black binary trees rather than simple linked lists. This
1575 should give rather dramatic speed improvements for directories
1576 contining large numbers of directories/files (more than 10000).
1578 kes Fix maxruntime bug #621.
1580 ebl Implement the include JobID in spool file name project.
1581 kes Reorder projects file in order determined by Jan 2007 vote.
1582 kes Implement item #12 on project list -- quick release of FD by
1584 kes Fix open of SQLite3 db where user does not have write permission
1585 so that DIR does not crash. Fixes bug #761.
1587 kes Add back missing @ in Win32 Makefile.
1588 kes Change 'Device not configured to autolabel' from INFO
1590 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1591 which should restart an indefinite # of times.
1592 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1593 other DIR specifications.
1595 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1596 Fix path quoting in SQLite scripts.
1597 Fix problems with SHGetFolderPath.
1599 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1601 kes Fix Job restart on error bug that promotes an Inc to a Full
1602 backup. This should fix bug #755.
1603 kes Add qt-console and first cut of code.
1607 kes Fix Bacula->Documentation link on Win32 to point to index.html
1608 instead of bacula.html. Fixed bug #750.
1609 kes Return JobId in db_get_job_record() when JobId==0. This should
1611 kes Do not release source pointers when restarting a failed job.
1613 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1614 This *should* fix bug #747.
1615 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1618 kes Modify USTORE constructor to set an empty store_source string,
1619 and don't copy the store_source string in a cancel. Hopefully
1620 this will fix Arno's seg fault, bug #744.
1621 kes Add back code to disable conio in configure. Fixes bug #743.
1622 kes Correct the Options scanner in the FD to correctly handle
1623 SHA1 option, which was eating the next option. Reported by
1625 kes Add code to indicate when the SD is spooling, spool wait, and
1626 despooling as requested by Alan Brown.
1628 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob