1 Technical notes on version 2.4
5 kes Do partial integration of the Win32 bat build created by Eric.
6 kes Fix bat not to block.
8 kes Ensure that SD tried to mount a volume not in an autochanger
9 at least once before asking for operator intervention.
10 kes Fix a pthreads bug in the Win32 pthreads emulation code.
14 kes Clear in-use bit on vol when unused while swapping.
16 kes Remove sleep at end of ./bacula
17 kes Clear hash packet for hardlinked files correctly. This corrects
18 a long standing bug where hardlinked files selected individually
19 would occasionally not be restored.
21 kes Apply Eric's patch to ensure that autoprune does not return
22 a Volume not in the autochanger unless requested to do so.
23 kes Correct bat restore display of multiple drives. This fixes
25 kes Do find_a_volume() each time an unload is done. This
26 fixes the failure of maxvol2-test.
28 Release Beta version 2.4.1-b2
30 kes Use Qmsg() in job.c watchdog callback.
32 kes Release main control rwlock if ABORTing.
33 kes Make watchdog connect timeout queue messages rather than sending
34 directly to avoid lock conflicts with the real thread.
35 kes Remove const char that causes problems with Python, which has
36 older 'incorrect' headers.
37 kes Add const char in dbd.c to avoid compiler warnings.
39 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
40 mt. This fixes bug #1116.
41 kes Fix failure of 2drive-concurrent-test. Always read label;
42 clear_unload() only after drive is defined in acquire_for_read().
44 Release Beta version 2.4.1-b1
46 kes Back out bad src/lib/base64.c change.
48 kes Generally clean up the manual tape loading code. The main
49 conceptial change is that when a volume is marked to be unloaded,
50 its volume name is retained, and it is only marked as unloaded
51 when either the autoloader says it is unloaded or another tape
52 is read on that drive.
54 kes Fix a recycling problem with two autochangers reported in bug
55 #1106. This may also (unlikely) fix a second recycling bug as
57 kes Fix a SD lock volumes deadlock problem reported in bug #1100.
59 kes Fix format problem in bscan output reported in bug #1105.
61 kes Copy more data when restarting a job so that run
62 overrides are kept. This should fix bug #1094.
63 kes Backport updates to jobq.c where possible.
65 kes Fix bug where SD did not ask operator if the device could not
66 be opened. Reported by Eric.
68 kes Add dbuser to DIR conf file (replaces user).
69 kes Add --with-db-password to ./configure
70 kes Fix regress to handle db_password.
71 kes Fix a couple of pedantic compiler warnings.
72 ebl Fix bug when starting a restore on a storage that doesn't
73 have the requested MediaType.
75 kes More work on word alignments -- eliminate all ints from
76 the configuration routines.
78 kes Fix bug reported by Scott Barninger where the bacula script
79 refers to scripts in the wrong directory. Needed to meet the
80 requirements of recent FHS location changes.
81 kes Fix word alignment problem on non-Intel 64 bit machines
82 such as Solaris. This should fix bug #1097 -- bus error in SD.
84 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
88 kes Update version to reflect the magnitude of the SD changes.
90 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
93 kes Add create_postgresql_database.sql to Win32 installer. Should
94 fix problem reported by Juilio Monteiro.
95 kes Get correct slot when auto unloading a device. This fixes bug
98 kes Fix multiple media restore.
99 kes Make DEVICE Slot private and access it via a method.
100 Allows better control over when it is set and cleared.
101 kes Fix possible seg fault if SQL error.
103 kes Add debug code to SD.
104 kes Fix renaming a Volume, which used the wrong Volume name.
106 kes If operator has rewind tape, print warning, release tape and
107 try once more. If tape is positioned somewhere, something went
108 wrong, so mark the tape in error and try once more. Previously
109 this error was fatal, now it produces an error message.
110 kes Ensure correct volume name displayed during restore
111 kes Ensure that Volume is mounted for restore.
113 kes Fix a few more Coverity reported problems.
115 Beta Release Version 2.2.10-b4
117 kes Enhance a couple of SD debug messages.
118 kes Tweak unload flag setting and ensure it is set during swap.
120 ebl Fix #1091 about bad output in estimate command.
122 kes Modify autochanger locking to attempt to avoid race
124 kes Make sure device not busy before doing label command.
125 kes Display open() errors except when polling. Previously too
126 many were suppressed. This should fix bug #1070.
127 kes Fix Win32 reparse points. Bacula will not recurse into any
128 reparse point directory, including mount points, unless the
129 directory is explicitly mentioned at the top level (same as
130 with Unix). A file that is linked to another file will be
131 backed up -- much as Unix does for hardlinked files.
132 This fixes bug #1041.
134 kes Remove double quotes from ChangeLog and ReleaseNotes
135 kes Remove StorageId test when pruning and recycling (Eric's changes).
136 kes Remove old form of locking when getting volumes -- causes deadlock.
138 kes Fix buffer overruns detected by Coverity.
140 Beta Release Version 2.2.10-b3
142 kes Tweak joblog display.
144 kes Implement --without-qwt
145 kes Fix layout of restore tree dialog
146 kes Add configure bat QWT libraries, so that bat can be built
147 with or without the QWT libaries.
149 kes Apply batfix bat cleanup patch from Riccardo.
150 kes Make sure we unload the right slot when swapping.
152 kes Improve SD reserve debug code.
153 kes Testing an improvement to free up volumes no longer in use.
155 Beta Release Version 2.2.10-b2
158 kes Rework SD acquire for read to handle autochanger Volume
160 kes Implement regression that explicitly tests swapping a Volume
161 from one drive to another.
162 kes Enhance disk-changer to detect most error conditions.
163 kes Fix SD code so that it properly swaps a Volume between drives.
164 This fixes bug #1083.
166 kes Prevent a Volume that is being swapped from being freed from
167 the volume list. This will most likely fix, at least partially,
169 kes Fix strippath so that it does not get a buffer overrun and crash FD.
170 This fixes bug #1078.
171 kes Make inability to change owner/group when creating a dir only a
172 warning rather than an error.
174 ebl Fix SQL query in migration code
176 kes Force unload of volume when wrong volume mounted in SD.
178 kes Fix bat seg fault at termination.
179 kes Add Bacula generated version to bat about box.
181 Beta Release Version 2.2.10-b1
183 kes Permit multiple simultaneous restores -- experiment.
185 kes Backport development stream SD reservation system changes.
188 kes Move final volume swapping code to DCR method and
189 call it from acquire_for_read().
190 kes When wrong volume is mounted during read, unload_autochanger.
192 kes Stop searching for Volumes in SD askdir if DIR returns the
193 same volume name twice in a row.
195 kes Tweak the swap Volume from one drive to another code so that
196 it now seems to work.
197 kes Resolve several problems with recycling that broke the new
198 code (these problems are in 2.2.9 as well).
199 kes Remove the volume lock when calling the sysop code.
200 kes Don't mark a reserved volume with no writers as unused otherwise
203 kes Rework class structures for VOLRES, DCR, and DEVICE to make
204 the method names a bit more logical, and for more logically
205 handling the responsibilities.
207 kes Remove redundant code in terminating the scheduler that just
208 causes a seg fault in many cases.
209 kes Cleanup releasing a volume and make it a DCR method.
210 kes Improve algorithm for detecting pre-reserved volume and
213 kes Tweak volume swapping code so it works.
214 kes Correct name overloading in mount.c
215 kes Replace released flag in VOLRES with reserved and add access
216 methods for the VOLRES class.
217 kes Prevent volume from being released while being swapped.
218 kes Refactor parts of stored/mount.c
220 ebl Add sanity checks for VolWriteTime and VolReadTime
221 ebl Take care of bad clock changes while computing VolWriteTime
222 and VolReadTime. This should fix or limit #1066
223 kes Correct error string numbers in dird/catreq.c
224 kes Restructure reserving, acquiring, and mounting volumes. Calls to
225 autochanger are deferred for mount.c -- simplifes the code.
227 kes Do not prune any running job. It just fails the job.
228 kes Lock the volumes when changing dev->reserved_device and marking
229 the volume unused otherwise the device can get reserved by
230 another job before the volume is released, thus blocking it.
233 Beta Release Version 2.2.9-b7
235 kes Close bat console windows first to eliminate error message
237 kes Remove useless code in Scheduler that causes seg fault on
239 kes Correct some SD catalog request error messages.
240 kes Don't allow pruning of any running job.
241 kes Turn off code in read_record that causes a seg fault in the SD
242 when reading past an EOS_LABEL.
243 kes Turn off unloading the autochanger in reserve.c as it just
245 kes Lock volumes when unreserving a device.
246 kes Do not mark volume unused when recycling.
247 kes When acquiring, don't mark volume unused if it is reserved (busy).
249 Beta Release Version 2.2.9-b6
251 kes Eliminate ./configure warning on po directory
252 kes Fix bug #1063, reuse of freed ptr in list nextvol.
253 kes Release regex compile buffer in filed/job.c
254 kes Add proper type of const char in sql_create.c
255 kes Turn off debug in daemon termination routines
256 kes Move free_volume_list() before devices are freed in stored.c
257 kes Fix reference to uninitalized stack variables in bregex.c.
258 This should correct bug #1067.
260 kes Fix possible seg fault in SD when freeing a volume entry.
262 kes Apply patch from bug #1069 that corrects spurious error messages
263 when ACLs enabled on SGI but no ACL exists.
264 ebl Fix a storage deamon segfault at debug level 500.
266 Beta Release Version 2.2.9-b5 -- not released
268 Beta Release Version 2.2.9-b4
270 kes Re-enable code to remember last volume mounted on a non-tape
272 kes Add patch supplied in bug #1068 that fixes a SD crash when using
273 a Virtual autochanger.
274 kes Generate correct JobMedia records during spooling/despooling when
275 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
276 <tih@hamartun.priv.no> for excellent analysis and testing.
278 Beta release Version 2.2.9-b3
280 kes Rework certain SD locking based on gdb tracebacks of deadlocks
281 sent by Eric. This code now uses only the volume_lock() rather
282 than the reservations lock when at EOM and acquiring a new
284 kes Ensure only one exit point in several subroutines.
286 Beta release version 2.2.9-b2
288 kes Fix to initial tape drive open to release the volume name
290 Beta release Version 2.2.9-b1
292 kes Fix to JobMedia fix.
293 kes Fix bug pointed out by Peter Much that causes the StorageId to
294 be updated when reading a tape (during migration, it could have
295 been incorrectly set to the write StorageId).
297 kes Implement autostart scripts for Debian
299 kes Fix mtx-changer.in for broken Debian mt program.
301 kes Massive commit of all fixes and back ports to create 2.2.9
303 kes Apply doc fix from bug #1062.
304 kes Resolve crash and improper restore wx-console Win32 restore
305 GUI. Fixes bug #1065.
306 kes Update Win32 wxWidgets to latest version.
307 kes Attempt to do correct handling of Win32 mount points. Should
309 kes Fix Win32 FD backup/restore memory leak due to improper termination
310 of BackupRead/Write. This fixes bug# 1038.
311 kes Add const to AIX prototype for initgroups()
313 kes Undo bug #1047 heap overrun fix as it is not correct.
315 kes Fix creating first JobMedia record during Migration to include
316 proper index. This caused slow restores of migrated jobs.
318 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
319 and do not strip paths on symbolic links.
320 kes Set catalog backup database and user name from values specified on
321 the ./configure line.
322 ebl Apply patch to correct bug #1031, about wrong pool source information
325 Release Version 2.2.8
327 kes Apply patch from Martin to correct bug #1040, bscan sets existing
329 kes Fixed important spelling error in doc -- bug #1045.
331 kes Move initialization of read/write res lock earlier in the code.
332 This fixes the crash with a null conf file. This fixes bug
334 kes Redefine CURES in lib/parse_conf to be URES and move it all
335 into lib/parse_conf.c -- this responds to bug #1042, but does
336 not fix it. The fix is not to compile with FORTIFY_SOURCE.
337 kes Backport fix de-referencing a NULL pointer in the scanner from
338 the trunk SVN. I don't think this was reported as a bug.
340 Beta release Version 2.2.8
342 kes Re-enable the new job code editing (%f).
344 kes Fix bsnprintf for float point numbers. I broke recently when
345 parameterizing some variables. This fixes bug #1036.
347 kes Move Heartbeat documentation from Job to Director resource.
348 This fixes bug #1033.
350 kes Fix existing switch drive SD code to call autochanger to release
351 any old volume. This must be done to keep the autochanger from
352 releasing subsequently newly reserved volumes in doing a close().
353 This should possibly fix bugs #1032 and #1018.
354 kes Apply big backport of current SVN SD code that corrects a number
355 of race conditions. This is a first step in fixing bug #1018.
357 ebl Fixes bug #1028 where "Selection Type" option was not usable
361 Release Version 2.2.7
363 kes Partial back out (disabled) %f job code editing because it
364 does not build on Win32.
365 kes Fix seg fault Frank Sweetser reports in regression testing
366 on his systems. The problem was that the original author of
367 bsnprintf.c did not take into account the side effects of
368 using ++x in the argument to a #define.
370 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
371 that implements double quoting include names in conf files,
372 and also allows piping input by having the first character
373 be a vertical bar (|).
374 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
375 that implement %f in RunScripts to pass the FileSet name.
376 kes Skip leading | when lex input comes from a pipe as suggested
377 by Michael Stapelberg <michael@stapelberg.de>.
379 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
380 Nerijus Baliunas <nerijus@users.sourceforge.net>
382 kes This patch corrects a problem where the maximum concurrent storage
383 jobs counter gets out of sync during restore jobs causing jobs to
384 'wait on max Storage jobs'. This patch fixes bug #1009.
386 kes Add new include to postgresql.c suggested by Marc Cousins so
387 that it compiles correctly with pgre version 8.3. Also fix
388 misuse of %x with pointer (should be %p).
390 kes This patch fixes bcopy so that it produces correct Volumes.
392 kes This patch eliminates spurious output to the console during a VerifyVolume
393 job that contains encrypted data. It fixes bug #1024.
395 kes This patch prevents the 'status dir' command from trying to use a scratch
396 volume and possibly moving it from one pool to another. This patch fixes
399 kes Fix --archivedir addition to configure. Replace it with
400 --with-archivedir in configure.in This fixes the regression
402 kes This patch fixes bug #1012 where the job is canceled because
403 of Max Run Time exceeded when the job has not yet started.
405 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
406 one 'part' to write. Instead of each part being stored on disk,
407 written to DVD, then deleted from disk, all parts are written to disk,
408 and only the last is written and deleted from disk.
410 kes Correct typos in disk-changer.in
412 kes This patch fixes the status command to include the formating string for
413 JS_AttrInserting. It fixes bug #1021.
414 kes This patch should fix the Mac OS X build problem on the latest
415 Darwin, where sys/types.h was not included correctly (apparently
416 due to a change in the Mac headers). The solution was to explicitly
417 ensure that it is defined for the ./configure.
418 This patch also has a rebuild of configure that includes the Debian
419 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
420 kes This patch should ensure that queued messages to the console are
421 displayed as soon as possible. It should fix bug #1007, but has been
422 reported not to work.
424 kes This patch fixes the infinite loop when trying to increase the
425 maximum number of volumes in a Pool during the add command.
426 This patch fixes bug #1008.
428 Release Version 2.2.6
430 kes Get fix for joblist bug in bat from trunk.
432 kes This patch fixes bug #1003 where putting the message output from
433 a Verify job into the catalog results in a recursive loop. The problem
434 seems to show up only with postgresql (to be verified).
436 kes Fix bug #942 where lots of emails where generated when the heartbeat
437 interval was low and Bacula wanted a different tape from the one in
440 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
441 which was updated during a restore (or a reading migration) bug #982
443 ebl Use qmake-qt4 instead of qmake when available (debian system).
445 kes Add a security warning to src/cats/make_catalog_backup.in indicating
446 that passing the password via the command line (arg 3) is insecure.
447 This responds to bug #990 (it doesn't fix it).
448 kes Apply 2.2.5-postgresql-errors.patch
449 kes Remove unneeded File table index on JobId, which is already
450 present as the first index of another multi-index.
452 kes Set default debug_level to zero. This corrects bugs #991 and #993.
453 kes Fix a crash in bat when it cannot connect to the Director for example
454 if the Director is not running.
456 kes Activate Close button on tray-monitor window. This fixes
459 kes Fix spurious warning message printed when creating a volume with
460 a LabelFormat. This fixes bug #976.
462 Release Version 2.2.5
464 kes Add JobId in place of Job name in all the Jmsg() output.
465 kes Correct the APP_DESC for the Win32 storage service (remove an e).
467 kes Add new SD despooling attributes and Dir inserting attributes
468 job status codes. This fixes bug #961.
469 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
471 kes Fix doc issue. This fixes bug #963.
472 kes Fix listing performance problems in bat. Pointed out by
474 ebl Fix replace on restore. This fixes bug #969
475 kes Fix bat code that tests for Win32. This should fix bug #968
476 kes Query 5 list wrong Vol after migration. This fixes bug #960
478 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
479 in back porting from 2.3.x
481 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
482 The details are included in the notes in this file.
484 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
485 messages; it fixes a problem opening the SQLite3 database when multiple
486 simultaneous jobs were running; it fixes a bug with certain versions of
487 MySQL where batch inserts failed because of table name character case
488 (upper/lower) differences.
489 kes Fix race condition that drops final block written to volume.
490 This happens in rare cases with multiple simultaneous jobs
491 when the Volume fills. This fixes bug #964. May be related
492 to bug #935 and possibly #903.
494 kes Fix FD->SD authorization failure, which was due to spurious
495 wakeups from a pthread_cond_timedwait(). Simply check the
496 predicate before continuing. This fixes bug #953
497 dvl Add new configuration item --archivedir
498 dvl Adjust regression tests to use tmp not /tmp. This will allow
499 multiple concurrent runs of the regression tests.
501 kes Eliminate more strerror() and replace with bstrerror().
502 kes Remove BSD getopt and replace with unrestricted IBM version.
503 kes Fix Win32 build for changed calling sequences.
505 kes Fix FD->SD authorization failure, which was due to spurious
506 wakeups from a pthread_cond_timedwait(). Simply check the
507 predicate before continuing. This fixes bug #953.
508 kes Add const char where needed (more to do).
510 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
511 kes Don't overwrite error message in check_tables_version.
513 kes Unlock batch insert tables with same calls used elsewhere.
514 kes Allow starting 59 jobs a second.
515 kes Make SD session key more random.
516 kes Add retry for SQLite opening db if it fails. Probably helps
518 kes Suppress extra error messages during batch insert failure.
520 kes Put some FD auth code on dbglvl rather than fixed.
521 kes Return insert attributes error message in db msg buffer to avoid
522 false error messages. Helps fix bug #966.
523 kes Separate batch init error messages. Probably helps fix bug #966.
524 kes If Dir gets an error during inserting attributes, cancel SD.
525 This reduces unnecessary error messages.
527 ebl Cleanup batch insert code. Probably fixes bug #965.
529 kes Turn off some code when batch insert not enabled.
530 kes Edit FD name in connect error messages.
532 kes Add code to handle tray monitor separated from Win32 FD.
533 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
535 kes Fix ANSI tape labeling. This fixes bug #954.
536 kes Increase the max block size to 4MB fixes bug #957.
537 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
538 is not properly mounted (recognized) during a poll.
539 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
540 Job that has differences reports Verify OK.
541 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
543 Release Version 2.2.4
545 kes Increase size of name string when FD making connection to SD.
548 kes Add waits to multiple exit detection code to try to force pid
549 file to always be deleted.
550 kes Restore good dev.tar.gz to rescue set appropriate binary property.
552 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
553 trying to switch drives by checking for blocking before unblocking.
555 kes Cancel storage daemon in all cases where FD reports error. This
556 should fix virtually all cases of bug #920.
558 kes Fix error message that was clobbered when Dir tells SD it does not
559 have write permission on Volume. This should fix a minor point
560 in bug #942, but not the main problem.
561 kes Add code to cancel job in SD if FD connection fails. This should
563 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
564 kes Fix migration code to get correct Volume name with multiple volumes
565 by skipping |. Fixes bug #936.
566 kes Implement patch supplied by Landon to fix bug #944 where using
567 TLS with bconsole uses 99+% of the CPU.
568 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
570 kes Move patches into patches directory.
572 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
575 ebl Using 'm' in bconsole will show messages like before,
576 and not memory usage.
578 Release Version 2.2.3
579 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
582 kes Fix bug #935, and probably also bug #903 where files were not
583 restored. MediaId was not properly set in JobMedia record after
586 kes Add ./configure search in qwt-qt4 for qwt package
587 kes Apply Martin Simmons patch that should turn off the new API usage
588 when batch insert is turned off allowing building on older
591 Release Version 2.2.2
593 ebl Detect if new PosgreSQL batch insert API is present.
594 kes Correct incorrect mempool call causing Director crash.
595 sb Update spec files for 2.2.1 release
597 Release Version 2.2.1
599 kes Update POTFILES.in
600 kes Cleanup a few underquoted AC_DEFUNs in configure
601 kes Apply patch from Martin Simmons that adds a test for va_copy to
604 kes Fix bug #921 by increasing the number of tries to create a new volume
606 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
607 can be called multiple times. Implement a version for machines
608 without va_copy() that gets a big buffer.
610 kes Integrate more portable zone offset code into bsmtp.c
611 Submitted by Attila Fülöp.
613 kes Fix bad SD->FD return status reported by
614 (James Harper) <james.harper@bendigoit.com.au>
615 ebl Fix a bug in read_close_session which return random status
616 thanks to James Harper
618 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
619 and directory names during restore of single file/directories.
620 kes Add sanity checks to .sql command when string is empty. Hopefully
621 that will resolve Dirks Director crash.
623 kes Apply patch submitted by Martin Simmons that corrects a seg fault
624 in the bsmtp chat subroutine when debug is >= 10.
626 kes Fix Director crash when running bat SQL queries.
627 kes Add David's notes on Item 8: Copy pools.
629 kes Rework projects file to be current and ready for a vote.
630 kes Enhance lex scanner error message.
632 kes Tweak LICENSE file to mention BSD code.
633 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
634 if specified on the ./configure.
635 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
636 This class is intended to allow us to open a second bsock to the
637 Director while in the restore subdialog.
639 kes Fix configure to create bat Makefile before creating dependencies.
640 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
641 kes Add a tooltip to the tray monitor.
642 dvl Set the Director's PID file before dropping privs. This fixes
645 kes Update AUTHORs file
646 kes Increase the default max concurrent jobs to 20 in FD and SD to
647 correspond with the default .conf files.
648 kes Rewrite the Win32 service routines. This eliminates the 3 copies
649 some different, of the same file created by RN when porting the
651 kes Rearrange some of the Win32 directories and the placement of the files
653 kes Set DEVELOPER flag in version.h
655 ========================================================================
656 Release Version 2.2.0
658 kes Apply a second doc patch from Marc.
659 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
660 improves the tips section that discusses how to setup multiple
663 kes Update bat README file.
664 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
665 corrects a typo in the Recycle status check in db_find_next_volume().
666 This will probably fix a number of annoying problems with multiple
668 kes Modify most of dird/msgchan.c to use bsock class calls rather than
669 bnet calls -- no functionality change.
671 kes Modify the Verify output to specify if files are missing on
672 the Volume(s) or disk. Fixes confusion in bug #916.
673 kes When more than one Volume is read in a migration job, the last
674 Volume bytes reported are from the last read volume rather than
675 the last written volume. Fixed. This fixes bug #910.
676 kes Fix display of Recycle flag after update volume=foo recycle=yes.
677 It previously printed New Recyle flag is: no. This fixes bug
680 kes Correct seg fault when switching tape drives during restore.
681 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
682 be used until after 2.2.0 release.
684 kes Remove fnmatch() in SD that permitted wild card specifications.
687 kes Fix %g in filename returned by SQL for browse tree reported by
689 kes Fix configure so that it puts config.out in the cwd rather than
691 kes Attempt to fix the locking problem reported by Eric in bug #906.
692 kes Make berrno class to leave errno unchanged after constructor call.
693 kes Make bnet_server use the heap rather than the stack to allocate
694 its socket fd pointers to avoid a crash at termination. Problem
695 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
697 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
698 and putting it in depkgs-qt along with Qt4.3.
700 kes Rework code in acquire.c that switches drives for reading when
701 the Media Type does not match. This should fix bug #906
703 ebl Fix a director segfault during job setup #907
704 kes Correct seg fault in postgresql when first operation returns no
705 rows. Fixes Dirks File browser problem seg fault with bat.
707 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
708 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
711 kes Implement PopUp YES/NO dialog for bat.
713 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
715 kes Correct RunScript to terminate job in FD on failure.
716 kes Change abort_on_error and AbortJobOnError to fail_on_error
717 and FailJobOnError in RunScripts.
718 kes Minor tweaks of code formating in RunScripts, principally to
719 avoid depassing 80 columns.
721 kes Eliminate one #ifdef Win32 in bsmtp
722 kes Implement grow tool to grow a file for testing very large databases.
723 kes Add big-vol-test to test Bacula seeking with > 5GB.
726 kes Modify find_next_volume() to return all values in Media record.
727 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
731 kes Update Release notes
733 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
734 Warning, in previous beta version, all media get from scratch keep their
737 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
738 This should fix bug #842. Made a note to look at removing the temp
739 files at the end of the install.
740 kes Add ability to mount and unmount a file device providing it is
741 marked as being removable and has the appropriate mount and unmount
742 commands defined in the Device resource. This fixes bug #830.
743 kes When applying a storage override, release all previous storage
744 definitions rather than just prepending the new storage.
745 This should prevent a good deal of confusion.
747 kes Implement ./configure search for qwt libraries.
749 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
750 Win32 FD. This should fix bug #893.
751 kes Remove an unnecessary beep in Win32 init code.
752 kes Update copyright dates in Win32 executable about boxes.
753 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
754 code with a BSD getopt.c and getopt.h.
755 kes Remove sched.h from the Win32 compat directory -- not used.
756 kes Remove the Exit menu item from the Win32 tray monitor. If you really
757 need to shut it down, do it through the services panel or the command
759 kes Remove some inappropriate Bacula FSFE copyrights.
760 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
761 kes Fix regress config non-portable test as pointed out by
762 Florian Heigl <florian.heigl@gmail.com>
763 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
764 as pointed out by Florian Heigl <florian.heigl@gmail.com>
766 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
767 Reported by Frank Sweetser.
771 kes Fix client-only build.
772 kes Integrate client-only fixes for bsys (initgroups) and conio from
773 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
774 kes Make arguments to get_scratch_volume() in same order as other
776 kes Rework the prune_volumes() subroutine so that after purging and
777 no volume found in desired pool, it will check for a scratch
778 volume. This prevents recycling the whole scratch pool.
779 kes Add code to status storage to print boffset_t (largefile support).
781 kes Move qwt (Graphics libarary for Qt4) to depkgs.
782 kes You now need a --with-qwt=<dir> to be able to build bat.
783 kes Update src/win32/cats/bacula_cats.def to include the new
784 db_get_query_dbids() call on Win32.
786 kes Correct a problem when selecting a scratch volume and moving
787 it to another pool that lost some columns.
788 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
789 kes Enhance Autochanger error messages to include Volume and device name.
790 kes Rework prune_volumes() code to take account of InChanger flag,
791 and to handle recycling volumes going to the Scratch pool and
792 current pool because the RecyclePool directive.
793 kes Implement a better and more efficient db_get_query_dbids() to
794 handle creating and passing back a list of DBIds.
798 kes Start work on new more efficient DBId subroutine. First use
799 will be for recycling volume to Scratch inchanger.
800 kes Increase number of JobIds in pruning from 1000 to 10000.
801 This to be replaced by above routine.
802 kes Begin implementation of building Qt4 on Win32.
803 kes Correct typo in fix I added for bad TLS shutdown.
804 kes Pull 2.0.3 patches into patches directory.
805 kes Update Release notes. Include qt-console in line count.
806 kes Update Projects file.
808 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
809 bug in migration code where a job that spanned two volumes
812 kes Implement new BST_DESPOOLING blocked state. Change from locking
813 during despooling in SD to blocking. This means that other threads
814 can work with the device structure, in particular the reservations
815 system while despooling.
817 kes Fix return in reservation message queue that missed clearing
818 the jcr lock (implemented 26Jun07 below).
819 kes Rename a number of dev methods to make locking function names
821 kes Document locking in lock.c. Move lock structures to new file
824 kes Move reservations message lock to lock jcr only this
826 kes Move main SD locking code into lock.c (new file).
827 kes Update Win32 build to include lock.c
831 kes Dirk committed the qwt library code for drawing graphs in bat.
832 kes Tweak install of qwt so that it is integrated with ./configure.
834 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
835 out by Eric (my typo).
836 ebl Fix configure.in to get batch mode enable
837 kes Return correct string from authenticate.cpp in bat when connecting
839 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
840 spurious line drops when using TLS.
841 kes Do not file reparse points when restoring a file that already
844 kes Implement Windows reparse points -- similar to directories, but
845 we do not descend into it. This is a first cut. They seem to
846 be backed up, but restore is not yet tested.
847 kes Remove restore_blocking in tls code when shutting a socket to leave
848 it in blocking mode. Hopefully this will fix the encryption bug
849 reported by Frank Sweetser.
850 kes When opening a file for backup, tell the OS that we are going to
851 read it sequentially -- optimization.
852 kes Change variable names in authenticate_director() to not conflict
853 with member names in bat. Caused great confusion with compiler,
856 kes Queue openssl error messages in case of comm problem.
857 kes Do shutdown() call if socket terminated.
858 kes Remove some duplicated code in tls.c
859 kes Move more of the bsock member variables into private and access
861 kes Add Frank Sweetser's tls-test to the regression suite.
863 kes Add Swedish sv.po file
865 kes Don't print clock skew message in FD if less than 3 seconds diff.
866 kes Add a bit of VSS info to status client.
867 kes Implement a first cut of Vista VSS, using Win2003 code.
871 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
872 loaded tape but uses first drive).
873 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
874 This was indeed a Win32 issue.
876 kes Simplify search of autochanger for in-use Volume.
877 kes Fix exit condition of check for in-use volume. kes Remove
878 inappropriate my_postgresql_free_result() in db_close()
880 kes Fix bad return in FD when encryption signature not found.
881 Probably caused a crash.
882 kes Inhibit missing encryption signature error messages for
883 file types where no signature computed.
884 kes Correct inverted check on autochanger in reservation system.
885 kes Tweak debug code in autochanger reservation.
887 kes Add some additional locking in the cats directory in subroutines
888 that modify packet variables called from batch insert.
889 kes Rework how dcrs are allocated. new_dcr() can now be called
890 with an existing pointer, and it will simply clean it up.
891 This allows the reservation system to test various different
892 devices, and will permit easy device changes.
893 kes A bunch of changes all over to handle new new_dcr() calling
895 kes Work more on the Volume management in the SD. Remember Volumes
896 for tape drives and for autochangers (even virtual disk changers).
897 kes When looking at the Volume list to reserve a drive, handle
898 autochanger names correctly by interating through the changer
899 devices. Also call the Director to see if a Volume is suitable
901 kes Fix some bugs in bscan. Make sure all media records are written.
902 Make sure that valid JobMedia records are written for disk files.
903 Previously they were completely wrong.
904 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
905 that the URLs don't change and so that the developers will all
906 work off the same copy. Rebuild from scrach.
907 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
911 kes Fix seg fault in FD from incorrect digest size.
912 kes Fix argument to non-OpenSSL crypto.c subroutine.
916 kes Remove a few malloc()s from the encryption code.
917 kes Use the class calls to bsock in filed/backup.c and restore.c in
918 place of the old bnet_xxx code.
919 kes Implement code that does an on the fly calculation of the
920 signing digest during restore of encrypted files. It makes
921 a best guess at the algorithm, and if it is not correct, will
922 then revert to the old code which reads the file after it is
924 kes Implement at least one missing crypto stream in stream_to_ascii()
925 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
926 #877 where a reload with bad syntax causes Dir to exit.
928 Cut: 2.1.14 beta (not released)
930 kes Do not free a volume on a tape drive until another volume is
931 mounted and read, or the autochanger unloads the volume.
932 This should help the SD re-use volumes that are already mounted,
933 and should fix bug #886.
934 kes Apply patch from user brettedgar that allows gnome2-console include
935 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
936 kes Apply patch from Lucien Weller that fixes day of week calculation
937 because of DST flag problem. Fixes bug #887.
939 kes Move find_next_appendable_volume() to after acquiring a valid device
940 in reserve.c. This fixes bug #864 -- confirmed by reporter.
942 kes Unable to reproduce bug 872. However added additional testing for
944 kes Bug #874 resolved by documenting SQLite limitations.
945 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
946 kes Bug #881 resolved by removing typo in mtx-changer script.
947 kes Made Frank Sweetser's wiki the official Bacula wiki with his
948 approval. Added a link to the wiki on the web page, and implemented
949 a backup from http://paramount.ind.wpi.edu
951 kes Fix update allfrompool to pass pool name.
953 kes Convert to pure GPL v2 license.
954 kes Fix sscanf problems reported by Peter Buschman that caused
955 a bus error on Solaris.
956 kes Rework (simplify) the select prompt in bat.
957 kes Move get_jobid_from_tid() into lib and create a
959 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
960 should definitely fix the problem of lost error messages in the
962 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
963 kes Eliminate tcpd.h from the project. Enclose the #include from the
964 library with extern C ...
965 kes Add print of signal name when a signal is trapped.
969 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
971 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
972 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
973 makes SQLit3 run 30 times faster, though a bit less safe.
974 kes Implement --with-batch-insert in configure and detection of thread
975 safe libraries. It is on by default, but turned off if no thread
976 safe library (e.g. SQLite 2) is available.
978 kes Fix Bacula PostgreSQL buffer overruns.
979 kes Do better checking for NULL results returned from PostgreSQL;
980 implement retry for failed queries; clear results buffer after
981 failed query. Hopefully this will correct the PostgreSQL failures.
983 kes Implement algorithm to handle only one appendable volume with
984 Prefer Mounted Volumes = no.
985 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
986 returned from a query.
987 kes Make volume lock recursive.
988 kes Implement an additional volume reservation algorithm that
989 starts by considering all reserved volumes then uses the
990 old brute force algorithm of searching the resources to
991 find a suitable device.
992 kes Add new reservations debug code and refine the old code.
993 kes Update the win32/dll/bacula.defs file.
995 kes Tweak reservations algorithm to permit a few more cases, i.e.
996 volume reserved, but on different drive, ...
997 kes Enhance SD status to include Pool and Media Type for drive in a
998 more readable format (a bit longer).
999 kes Fix PostgreSQL double free.
1001 kes Minor refactoring of restore decryption code.
1002 kes Add code to smartall.c to detect double free of a buffer.
1004 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1005 so that bsmtp will create a correct email address (mailbox only).
1006 kes Modify 'memory' command so that the buffers are listed as 'In use'
1007 to avoid confusion with Orphaned buffers.
1008 kes I reworked the OpenSSL include/lib flags to be handled in
1009 the standard Bacula way, which should fix bug #863 concerning
1010 non-standard OpenSSL libraries.
1012 kes Implement Help Browser window for bat.
1013 kes Fix reload bug that reset StorageId to zero.
1015 kes Fix TLS #ifdefing when TLS turned off.
1016 kes Ensure that when labelling a tape with Slot=0 that InChanger
1018 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1020 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1021 add DISTINCT (required by PostgreSQL).
1022 kes Implement BSOCK authenticate_director() method. Eventually will
1023 authenicate all daemons.
1024 kes Move several more functions into the BSOCK class.
1026 kes Add code to tell the OS that we no longer need a cached
1027 file that we were reading. In findlib/bfile.c. Also,
1028 only cache files that we are reading. Thanks to
1029 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1030 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1031 kes Implement script to automatically generate cats and dll .def
1032 files for Win32 dll.
1033 kes Update README.mingw32 to include new .def file generation.
1034 kes Correct typo in UTF-8 error message as reported by:
1035 jhernandez <julianhernandez@gmail.com>
1036 kes Add additional sm_check() code on debug level 1.
1037 kes Set default debug level to 1.
1038 kes Trap SIGABRT in attempt to get traceback.
1040 kes Reduce bat connect timeout from 30 to 15 seconds.
1041 kes More restructuring and implementing BSOCK class in place of
1043 kes Remove a few unnecessary malloc() tests in crypto code.
1044 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1045 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1046 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1048 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1050 kes Fix Verify InitCatalog. The attributes were not pointing to the
1051 correct saved location.
1052 kes Implement message callback so that GUI is sure to get all
1053 daemon messages. Currently displayed in a dialog in bat.
1054 kes Ignore SIGUSR2 (Bacula timer) in bat.
1055 kes Apply regress patch from bug #859 to allow regress to work
1056 with Solaris compiler.
1058 kes Begin adding TLS support to bat.
1059 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1060 clean up lex.c and make it more readable.
1062 kes Move more bnet functions into the BSOCK class.
1063 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1064 kes Complete change of berrno strerror() method to bstrerror()
1066 Release: 2.1.10 beta
1068 kes Cleanup incorrect email addresses in bsmtp.
1069 kes Make bat display initial messages rather than discard them.
1071 kes First cut of adding .mod to the run command.
1072 kes Implement auto display of messages in bat.
1073 kes Enhanced preferences to allow all Bacula output to be
1076 kes Try to make bsmtp date routines more generic.
1077 kes Fixed bug #856 autochanger documentation.
1078 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1079 kes Add new cats entry point so Win32 builds.
1081 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1083 kes Do better checking for the MySQL 64 bit libraries looking for both
1084 .a and .so libraries.
1085 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1086 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1087 kes Require the thread safe version of MySQL during configure. Thanks
1088 to Andre Noll for pointing this out.
1089 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1090 continuing in migration code.
1091 kes Apply implementation of tray-monitor font derived from gnome-console
1092 submitted by Andreas Piesk <a.piesk@gmx.net>
1094 kes Eliminate important memory loss in SQLite
1095 kes Fixed the batch insert MySQL thread specific data that was not
1096 being freed. See cats/mysql.c:db_thread_cleanup().
1097 kes Fix restore before command.
1098 kes Convert old hdr.name to name() in a few places.
1099 kes Implement update jobid command.
1100 kes Return all time_t dates in db_get_job_record()
1101 kes Stop watchdog in SD earlier.
1102 kes Put Pool just after Storage in please mount message.
1103 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1106 kes Update the po files.
1107 kes Fix Verify InitCatalog by making it cache attributes.
1109 kes Change name bacula-bat to bat for man 1 page to correspond to
1111 kes Check for client and store NULL pointers in status command. This
1113 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1114 kes Fix sign extended editing of %p.
1115 kes Clean out a little old #ifdefing in cats/mysql.c
1117 kes If time diff between DIR and FD is more than 600 seconds convert
1118 INFO message to WARNING.
1119 kes Implement heap size display in status for all daemons.
1120 kes Attempt to fix MySQL db open memory loss (not successfull).
1121 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1122 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1123 Query. This looks like a MySQL but but by doing extra releases,
1124 the memory goes away. This should fix bug #847.
1126 kes When backup fails, cancel SD before waiting for sd termination.
1127 kes If SD is waiting for FD to connect during cancel, wake up the
1129 kes Fix fsf code so that errno is correctly reported.
1130 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1132 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1133 so that Bacula doesn't later stumble into a seg fault.
1134 kes Use the term Restore Client in the restore Job report.
1135 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1136 the original job's FileSetId.
1137 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1138 spooling in migration jobs. Not yet tested.
1139 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1140 reading conf file from a pipe. However, do it with open_bpipe()
1141 rather than popen. Not yet tested.
1143 kes Fix an ugly bug where the VolCatBytes were getting updated
1145 kes Implement bconsole memory command that prints current memory
1146 usage, plus smartalloc dump.
1147 kes Clarify some error messages in backup, admin, and migrate.
1148 kes Shrink label dialog to smaller size.
1149 kes Invert Cancel OK buttons on restore to be OK Cancel.
1150 kes More strerror() to bstrerror() conversions.
1152 kes Start implementing bstrerror() in place of strerror().
1153 kes Stripping path -- seems to work.
1155 kes Prevent door and port files from being restored (mostly
1157 kes Free an unreleased buffer in compat code.
1158 kes Change console Job name from *Console* to -Console- to eliminate
1159 Win32 filename problems. Put Win32 path separator when creating
1160 Console file. This fixes bug #846.
1161 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1163 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1165 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1166 to force Win32 error message.
1168 kes First cut strip path. The data should be passed to the FD,
1169 but nothing is done with it yet.
1170 kes Enhance the digest and signature routines in the crypto
1171 library to accept a JCR and to use it to print error messages
1172 so that they will go in the Job report rather than the daemon's
1174 kes Simplify some of the verify signature code.
1175 kes Simplify a few of the alternative returns in the signature
1178 ebl Use only POSIX regex instead of GNU regex in breg.c for
1179 File relocation. It fix broken freebsd compilation.
1180 kes Convert all other Dir files to use new ua class message
1182 kes Tentative fix for missing digest signature in bug 807.
1183 kes Correct handle problem in new win32_ftruncate routine.
1184 kes Convert ua_purge.c and ua_update.c to use new ua class
1185 message routines for bat.
1187 kes Correct incorrect installation of LICENSE in Win32 installer.
1188 kes Display LICENSE at the beginning of the Win32 install.
1189 kes Attempt to correct the need for the png files to be installed
1191 kes Reapply my bat.conf install script in qt-console. I think I
1192 editted bat.pro instead of bat.pro.in and it was lost.
1193 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1194 the /var/lock/subsys for subsysdir. Also corrects typos in the
1197 kes First cut update job.
1198 kes Correct configure to include qmake of src/qt-console directory.
1200 kes Make restore job yes/mod/no print in one command so GUI works.
1201 kes First cut implementing backup and restore client.
1202 kes Correct editing in Verify output that caused a seg fault.
1204 kes Insure that bat.conf is not overwritten during installation.
1205 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1206 while I was implementing migration in March 2006 !
1208 ebl Cleanup file relocation, using char *RegexWhere instead of
1209 char *where + bool where_use_regexp
1210 kes Update some manpages and add bat manpage.
1211 kes Make a first cut at converting bacula.spec.in for bwx-console
1213 kes Apply patch from John Goerzen to add hostname as fourth argument
1214 to make_catalog_backup script.
1215 kes Fix typos I introduced into bsmtp.c
1216 kes Make pm_strxxx() routines handle input of NULL pointer. This
1217 is to protect from NULL pointers returned from SQL databases.
1218 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1219 kes Add more debug to FIFO code -- fix fifo regression test.
1221 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1222 kes Add thread timer to bnet_connect() to break from OS if wait time
1225 kes Update Win32 build to include new files, new symbols, and
1227 kes Implement socket level heartbeat (tcp_keepidle)
1228 ebl Commit File relocation patch
1229 kes Make bat have 'make install' target.
1230 kes Warn during install if old gnome-console binary found.
1231 kes Warn during install if old wx-console binary found.
1232 kes Add -8 option to bsmtp command line to add content type utf-8.
1233 Fixes bug #809. (Character coding problem in bsmtp).
1234 kes If < is found in target (from, to, cc) then do not enclose the
1235 target in < > in bsmtp. Fixes bug #772 (malformed address).
1236 kes When printing certain items in dbcheck, stop after 300000.
1237 Fixes bug #822. (dbcheck loops).
1238 kes Incorrect status in Dir after waiting for mount with poll set.
1241 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1243 kes Print waiting to reserve a device every 5 mins.
1245 kes Don't call close_part in label.c if tape and relabel.
1246 kes Don't free volume if busy in close() -- should help with
1248 ebl Fix #824 RunScript bug (After script could be execute twice)
1249 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1250 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1251 Add a regression script to test RunScript
1253 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1256 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1257 deprecated. No additional bugs will be fixed, and they will be dropped
1258 in a future release (probably 2.4.0).
1259 kes Change name of wx-console to bwx-console to make it more Bacula
1261 kes Change the name of gnome-console to bgnome-console to make it
1264 kes Some time in March, a Feature Request with patch from Jorj Bauer
1265 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1267 The ability for the director to validate a Client (FD) CN against
1268 an arbitrary set of patterns rather than the hostname, with
1269 A new 'TLS Allowed CN' set of directives which are implemented
1270 in the Client resource. Then pattern matching is used in place
1271 of hostname matching against the Certificate's CN. As an example, we
1272 have certificates which (a) use a local CA, and (b) have a CN of the
1274 kes Add new/changed entry points to Win32 build
1275 kes Create unaccepted-projects for projects that are not accepted.
1276 kes Simplify locking in the reservations system.
1277 kes Add more debug code in reservations.
1278 kes Make sure error condition on reserving a volume is handled correctly.
1279 kes Correct handling of volume_in_use.
1280 kes Correct handling of initializing a device.
1281 kes Move handling of broadcasting releasing a device into release_device().
1282 kes Correct attaching dcr to dev so that it is only done if device
1283 is properly initiated.
1285 kes Locking debug level tweaks in SD.
1286 kes Tweak new Volume code.
1288 kes Add exec external-command [wait-seconds] to bconsole. This
1289 executes the external-command. Note! normally external-command
1290 should be enclosed in double quotes.
1291 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1292 it should normally be off in a production system.
1294 kes Implement die command for SD so that we can force it to dump.
1295 kes Implement SD lock debug code.
1296 kes Implement new algorithm for keeping Volume list in SD. It
1297 is now owned by the device.
1299 kes Implement new code for freeing in use volumes that should
1300 resolve if not all, some of the problems of multiple drive
1301 tape conflicts described in bug 801.
1303 kes Fix gui/bacula-web/images files in svn.
1304 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1306 ebl Fix a bug in batch mode (in string escape)
1307 kes Correct migration prune SQL typo that crept in in a
1308 recent 2.1.x change.
1310 kes Move bnet_despool() into class in bsock.c
1311 kes Modify job report to include director name and Build OS.
1312 kes Move drop root privilege and check_catalog() before fork.
1313 kes Add update database scripts (version 9 to 10) to updatedb directory.
1315 ebl Check size and age of each file after its backup to see if
1316 it has changed during backup, if 'checkfilechanges' is set.
1317 The FD will do an extra check (stat(2)) after
1318 each file backup. mtime, ctime and size are compared with
1319 'before backup' information. If time or size mismatch, an
1320 error message will be generated. You must upgrade FD to use it.
1322 kes Make database name and user configurable
1323 --with-db-name=xxx --with-db-user=xxx
1324 kes Add back database type to message.c for debugging.
1326 kes Implement dir_sql() which issues an SQL query.
1327 kes Modify bat medialist to use dir_sql() and do some minor C++
1328 formatting as well as eliminating a number of pointers, simplifing
1331 kes Fix some of the mtx-changer grep commands for tape label readers.
1332 kes Convert a number of bsendmsg into the appropriate send/warning/error
1333 message class calls.
1334 kes Suppress the using database message in the .sql command.
1335 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1337 kes Add context menu for floating a window.
1338 kes Some minor cleanup and name changes in qt-console
1339 kes Add doing mt setblk 0 in Win32 mtx-changer.
1340 kes Apply Martin's bug fix to move definition of ENODATA for
1342 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1343 sqlite2 and sqlite3.
1345 kes More pruning cleanup.
1346 kes Turn on wait_for_drive by default in mtx-changer.
1347 kes Turn on Batch insert code by default as it now passes regression.
1348 kes Add ./configure --enable-bat to enable building of Bat.
1349 No install yet though.
1351 kes Implement a new .sql command for bat.
1352 kes Implement code to turn off pruning in obtaining the next volume.
1353 Pruning is turned off for the status dir command, but turned on
1354 for SD requests and for the list nextvolume command.
1356 kes Correct Qmsg() that was not updated correctly when committing a
1357 previous change (probably the recent TLS patch).
1359 kes Write new subroutine is_volume_purged() that explicitly checks
1360 if the Volume is purged, and if so marks it as such. This should
1361 resolve problems reported about needing to mount twice to recycle
1363 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1364 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1365 amount of duplicated code.
1366 kes Do volume pruning only for the Media Type desired (reduces pruning time
1367 if multiple Media Types are in the same pool).
1368 kes Implement more detailed info in the Job report for the Bacula version
1370 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1372 ebl Add bbatch tool to bench database and insert mode.
1373 Fix sql quote stuff in batch mode
1374 Fix sql stuff for mysql
1376 kes Correct problems with am/pm scheduling. Fixes bug #808.
1377 kes Implement new prunning code that prunes up to 1000 jobs at
1378 the same time. The same technique can be applied to a number
1379 of other prune/purge subroutines.
1380 kes Add an insanity check when starting a new tape job to ensure
1381 that the tape position has not been changed. If so fail the
1383 kes Fix Win32 build for dlls to add the folllowing:
1384 src/lib/bsock.c -- new file with new entry points
1385 src/lib/dlist.c -- new entry points
1386 src/cats/sql_create.c -- new entry point
1387 src/cats/sql_cmds.c -- new DATA item exported
1389 ebl batch mode cleanup bscan-test is ok now.
1390 kes Implement SD code to check length of disk volume before appending.
1392 kes Correct return status on db_batch... routines.
1393 kes Add call to db_write_batch_file_records() to migration code.
1394 ebl Fix AfterJob timing
1395 kes Move the checking of the database in initializion of the Director
1396 to after we drop privileges. This avoids the need for both root
1397 and bacula access to the DB.
1398 kes Correct a misplaced variable definition in src/filed/backup.c
1399 kes Correct how the new batch insert db_create_attributes_record()
1400 uses the arguments. Caused a seg fault in bscan.
1401 kes Implement lock() and unlock() methods in DEVICE class.
1402 Implement block() and set_block(xx) methods in DEVICE class.
1403 kes Modify bnet_connect() so that it uses time() to check for the
1404 wait time expiring (on some OSes, some system calls may not
1405 return immediately).
1406 kes Modify Verify to obtain the previous JobId when it is actually
1407 running rather than at schedule time (as it was in 1.38.x).
1408 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1410 kes When checking pid in pid file, continue running if the pid is
1411 the same as ours. This occurs on IRIX after a system crash.
1414 kes Extend new GUI API.
1415 kes Make the ua structure a class, and implement send_msg(),
1416 error_msg(), warning_msg(), and info_msg().
1418 kes Apply fix from for building wx-console on the Mac from
1420 kes Implement new select mechanism for GUI programs.
1421 kes Reorganize initialization of stackedWidgets in bat.
1423 kes Add updated nagios plugin supplied by Christian Masopust.
1425 kes More bat implementation.
1426 kes File migrate bug with Pool Occupancy using mediaid instead
1427 of jobids. Fixes bug #795.
1428 kes Fix orphaned buffers in filed backup and verify due to
1429 crypto buffers not freed during errors. Fixes bug #789.
1430 kes Extend new GUI api code to tree commands.
1431 kes Ensure that tree and dot commands check console ACLs.
1432 kes Permit marking directory with trailing slash.
1433 kes Allow 20 console connections (instead of only 10).
1435 kes Add smartctl call to bacula-sd.conf as an example of getting
1438 kes Modify jobq.c to let simultaneous restore jobs run. This may
1439 cause them to fail if they cannot get a drive.
1440 kes Add Client Connect Wait to Storage daemon to permit users to
1441 modify the time the SD waits for a FD connection.
1443 kes Correct virtual changer check which was backwards. This caused
1444 volumes to be unloaded into slots already occupied.
1446 kes Apply Command ACL filter to JobId list in restore command.
1447 kes Correct typeo in var.c patch.
1449 kes Don't let Bacula prune File or Job records for the current Job.
1450 kes Fix variable substitution pad + inc bug reported (with patch)
1453 kes Correct SQLite log table index as reported by Luca Berra.
1455 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1457 kes Begin implementing new comm signals for API.
1458 kes Fix a few places in lib/message.c where the open fd may
1460 kes Continue implementing lib/bsock.c (real class). Make jcr,
1461 who, host, and port private. There are new methods to access
1462 them for non-class use. This required touching a number of files.
1464 kes Add LANG=C to autoconf/randpass so it works with languages other
1465 than English. Fixes bug #788.
1467 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1469 You will not be able to generate Include/Exclude list any more.
1470 It will be fixed soon.
1471 If you want to use this, you can apply
1472 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1474 kes Restore of sockets created false error messages because Bacula
1475 no longer restores sockets, but the code was still trying to
1476 set the attributes on a non-existent file. Reported by a user.
1477 ebl finish RecyclePool feature
1478 Media will takes Pool.RecyclePool
1479 when moving from Scratch to a Pool or when user will do
1480 update volume=xxx frompool
1481 To use it, add RecyclePool = aPool to your Pool resource
1484 RecyclePool = Scratch
1488 kes Expand new BSOCK class adding signal() and new BNET signals.
1489 kes Begin enhancing the dot commands adding a new API function
1490 that returns more information and will make it easier
1491 to interface to the Director from a program.
1493 kes Make DEVICE fd private. Its new name is m_fd, and can be
1494 obtained with dev->fd() outside the class. This is the
1495 first of many DEVICE members to be made private.
1496 kes Implement Michael Renner's idea on having a virtual disk
1497 changer. I made some minor modifications (e.g. I did not
1498 implement the Virtual Changer directive, but simply set
1499 the Changer Command to an empty string.
1501 kes Implement a BSOCK send() method that writes the whole record
1502 in a single write() request rather than in two.
1503 ebl add update volume=xxx recyclepool=yyyy
1504 volume takes recyclepool from pool when using update volume=xxx from pool
1506 kes Fix encryption deblocking bug, which caused some restored files
1507 to be truncated. This fixes bug #763.
1508 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1509 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1511 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1512 ebl Use btime_t instead of uint64_t in media patch.
1514 kes Optimize the use of the database a bit in the Status dir command.
1515 Only open it when needed, ensure that if any previous database
1516 was opened, it is closed.
1518 kes Correct VolCatBytes bug from media patch.
1519 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1520 in the case of orphaned records.
1521 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1522 and File records in 300K chunks to be more efficient. This
1523 idea came from Juan Luis Frances (if I remember right).
1524 kes Apply Eric's scratch patch that moves a purged Volume to
1525 the RecyclePool. Question: how is RecyclePool set? what
1526 happens to the ScratchPool?
1527 kes Apply Eric's media patch that collects read/write media
1528 times as well as byte counts. This patch requires a
1529 simultaneous upgrade of the DIR and SD. Note, there
1530 should be some way to turn off timing. I'm not sure
1531 times are in Bacula units.
1532 kes Apply Eric's batch-insert patch.
1534 kes Update projects list.
1536 kes Implement Include/Exclude file lists in FD as dlists using
1537 the new dlistString class. This permits efficiently having
1538 large include/exclude lists and completes project Item 25.
1539 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1540 console is authorized to cancel the job. This fixes bug
1542 kes Modify SD so that the VolCatJobs medium record is updated
1543 at the beginning of a Job rather than the end. This
1544 fixes bug #775 where exceeding MaxVolJobs caused jobs
1546 kes Added a mutex around getting and setting Volume information
1547 so that multiple simultaneous jobs will single thread.
1549 Switch to using Subversion
1550 kes Remove src/pygtk-console/ from configure
1552 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1553 plus the entrypoints.
1554 kes Apply patch supplied that corrects debug print
1555 in canceling jobs for max run time. Supplied as
1556 part of bug #621, which was previously fixed.
1558 kes Test on job_canceled() and sd_msg_thread_done inside
1559 loop starting the message thread to avoid a race condition.
1561 kes Remove rl_catch_signal from console.c as it conflicted
1562 with the header definition. Fixes bug #765.
1563 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1565 kes Clarify some stored/acquire messages to indicate if the
1566 problem is with read or append.
1568 kes Fix memory leak with storage ids in cats/sql_get.c
1569 kes Terminate watchdog earlier to avoid reference to released
1570 memory -- reported by Jason Austin.
1571 kes Move closing the database from jobq.c to the director daemon
1572 termination routine. This fixes memory leaks for shadow jobs
1573 (i.e. migration jobs).
1574 kes Free up the unique jobid chain items in migrate.c. This fixes
1575 a memory leak problem.
1576 kes Convert some ugly looking for statements to use foreach_alist
1577 in findlib/find.c. This will facilitate converting the structures
1578 to use dlist (for large include/exclude lists).
1579 kes Fix a bug in the btree.c and btree.h routines, then rename them
1580 rblist and add them to be built in src/lib. Include some new
1581 methods written by Rudolf Cejka that make the code more readable
1582 (hides some of the ugly casting).
1583 kes Add set_next() and set_prev() methods which make the code much more
1584 readable. Also add a new dlistString class that facilitates storing
1585 strings in dlists. To be used in the large include/exclude lists.
1586 kes Make some trivial modifications to lib/tree.h that use rblist
1587 rather than dlist for storing the tree links. This was suggested
1588 by Rudolf Cejka. The result of this is that the restore tree now
1589 uses red-black binary trees rather than simple linked lists. This
1590 should give rather dramatic speed improvements for directories
1591 contining large numbers of directories/files (more than 10000).
1593 kes Fix maxruntime bug #621.
1595 ebl Implement the include JobID in spool file name project.
1596 kes Reorder projects file in order determined by Jan 2007 vote.
1597 kes Implement item #12 on project list -- quick release of FD by
1599 kes Fix open of SQLite3 db where user does not have write permission
1600 so that DIR does not crash. Fixes bug #761.
1602 kes Add back missing @ in Win32 Makefile.
1603 kes Change 'Device not configured to autolabel' from INFO
1605 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1606 which should restart an indefinite # of times.
1607 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1608 other DIR specifications.
1610 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1611 Fix path quoting in SQLite scripts.
1612 Fix problems with SHGetFolderPath.
1614 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1616 kes Fix Job restart on error bug that promotes an Inc to a Full
1617 backup. This should fix bug #755.
1618 kes Add qt-console and first cut of code.
1622 kes Fix Bacula->Documentation link on Win32 to point to index.html
1623 instead of bacula.html. Fixed bug #750.
1624 kes Return JobId in db_get_job_record() when JobId==0. This should
1626 kes Do not release source pointers when restarting a failed job.
1628 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1629 This *should* fix bug #747.
1630 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1633 kes Modify USTORE constructor to set an empty store_source string,
1634 and don't copy the store_source string in a cancel. Hopefully
1635 this will fix Arno's seg fault, bug #744.
1636 kes Add back code to disable conio in configure. Fixes bug #743.
1637 kes Correct the Options scanner in the FD to correctly handle
1638 SHA1 option, which was eating the next option. Reported by
1640 kes Add code to indicate when the SD is spooling, spool wait, and
1641 despooling as requested by Alan Brown.
1643 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob